229 lines
6.0 KiB
Plaintext
229 lines
6.0 KiB
Plaintext
G6-NTP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32, enterprises,NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
DisplayString, MacAddress
|
|
FROM SNMPv2-TC
|
|
g6 FROM MICROSENS-G6-MIB
|
|
;
|
|
|
|
management MODULE-IDENTITY --Category
|
|
LAST-UPDATED "201802121619Z"
|
|
ORGANIZATION "MICROSENS GmbH & Co. KG"
|
|
CONTACT-INFO
|
|
"Kueferstrasse 16
|
|
D-59067 Hamm
|
|
Germany
|
|
support@microsens.de
|
|
http://www.microsens.de"
|
|
DESCRIPTION
|
|
"Microsens private MIB for Generation 6 Ethernet Switches"
|
|
|
|
REVISION "201802121619Z"
|
|
DESCRIPTION
|
|
"File creation"
|
|
::= { g6 3 }
|
|
|
|
ntp OBJECT IDENTIFIER ::= { management 73 }
|
|
|
|
|
|
|
|
-- *************************** CONFIGURATION SECTION ********************************
|
|
|
|
|
|
ntpEnableNtp OBJECT-TYPE -- enable_ntp
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled the local clock will be synchronized with the time provided by a time server."
|
|
::= { ntp 1 }
|
|
|
|
|
|
ntpSyncNow OBJECT-TYPE -- sync_now
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Action command to read time server now and setup the internal clock."
|
|
::= { ntp 2 }
|
|
|
|
|
|
ntpDhcpProvidesNtpServer OBJECT-TYPE -- dhcp_provides_ntp_server
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable DHCP to automatically retrieve NTP server address(es). When disabled, the locally defined addresses are used instead."
|
|
::= { ntp 3 }
|
|
|
|
|
|
ntpMainNtpServer OBJECT-TYPE -- main_ntp_server
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the preferred NTP server address. IP address or symbolic name may be used."
|
|
::= { ntp 4 }
|
|
|
|
|
|
ntpBackupNtpServer OBJECT-TYPE -- backup_ntp_server
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This defines an optional alternate ntp server address. IP address or symbolic name may be used."
|
|
::= { ntp 5 }
|
|
|
|
|
|
ntpTrustedServer OBJECT-TYPE -- trusted_server
|
|
SYNTAX INTEGER { disabled(0), enabled(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Some NTP server (Windows) indicate a too large deviation or indicate they are unreliable when they are not externally synchronized. To be able to still use such a server set this option to true."
|
|
::= { ntp 6 }
|
|
|
|
|
|
ntpSyncInterval OBJECT-TYPE -- sync_interval
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Resynchronization interval (minutes), default once per day."
|
|
::= { ntp 7 }
|
|
|
|
|
|
ntpShowTimeDate OBJECT-TYPE -- show_time_date
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show system time and date."
|
|
::= { ntp 8 }
|
|
|
|
|
|
ntpListTimeZones OBJECT-TYPE -- list_time_zones
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays a long list of available timezones. Pick the timezone that matches your location and use this name for the time_zone parameter."
|
|
::= { ntp 9 }
|
|
|
|
|
|
ntpTimeZone OBJECT-TYPE -- time_zone
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter a string exactly as obtained via list_time_zones command. Note that a change of the time zone if only effective after a system reboot."
|
|
::= { ntp 10 }
|
|
|
|
|
|
ntpTimeFormat OBJECT-TYPE -- time_format
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter permits definition of the time format displayed under ntp.local_time. When left blank the default format hrs:min:sec is used. The parameter follows the Linux date command syntax. Please refer to external documentation for details. Use %k:%M for time without seconds. Use %P to add AM/PM where is applies. There are more options."
|
|
::= { ntp 11 }
|
|
|
|
|
|
ntpDateFormat OBJECT-TYPE -- date_format
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter permits definition of the data format displayed under ntp.local_date. When left blank the default format year-month-date is used. The parameter follows the Linux date command syntax. Please refer to external documentation for details. It is also possible to add weekday %A or month %B or week of year %V, etc."
|
|
::= { ntp 12 }
|
|
|
|
|
|
|
|
-- ****************************** STATUS SECTION ********************************
|
|
|
|
|
|
ntpStatus OBJECT-TYPE -- status
|
|
SYNTAX INTEGER
|
|
{
|
|
unset (0),
|
|
manuallySet (1),
|
|
synchronized (2),
|
|
syncFailed (4),
|
|
dayLightSavingTime (16)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates by which means the clock was last set. "
|
|
::= { ntp 100 }
|
|
|
|
|
|
ntpLocalTime OBJECT-TYPE -- local_time
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the current local date according to selected time zone in the format defined user ntp.time_format."
|
|
::= { ntp 101 }
|
|
|
|
|
|
ntpLocalDate OBJECT-TYPE -- local_date
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the current local date according to selected time zone in the format defined user ntp.date_format."
|
|
::= { ntp 102 }
|
|
|
|
|
|
ntpUsedNtpServer OBJECT-TYPE -- used_ntp_server
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Actually used ntp server IP address or name"
|
|
::= { ntp 103 }
|
|
|
|
|
|
ntpDynamicNtpServer1 OBJECT-TYPE -- dynamic_ntp_server_1
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Main dynamically assigned ntp server IP address."
|
|
::= { ntp 104 }
|
|
|
|
|
|
ntpDynamicNtpServer2 OBJECT-TYPE -- dynamic_ntp_server_2
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alternate dynamically assigned ntp server IP address."
|
|
::= { ntp 105 }
|
|
|
|
|
|
ntpDynamicNtpServer3 OBJECT-TYPE -- dynamic_ntp_server_3
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alternate dynamically assigned ntp server IP address."
|
|
::= { ntp 106 }
|
|
|
|
|
|
ntpDynamicNtpServer4 OBJECT-TYPE -- dynamic_ntp_server_4
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alternate dynamically assigned ntp server IP address."
|
|
::= { ntp 107 }
|
|
|
|
|
|
|
|
END
|
|
|