11135 lines
293 KiB
Plaintext

LUM-PM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, NOTIFICATION-TYPE,
Integer32, Gauge32, Counter32, Counter64
FROM SNMPv2-SMI
OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, DateAndTime, TruthValue, DisplayString
FROM SNMPv2-TC
lumModules, lumPmMIB
FROM LUM-REG
SubrackNumber, SlotNumber, PortNumber, MgmtNameString, FaultStatus,
BoardOrInterfaceOperStatus, BoardOrInterfaceAdminStatus,
CommandString, ObjectProperty, OnOff
FROM LUM-TC;
lumPmMIBModule MODULE-IDENTITY
LAST-UPDATED
"201812210000Z" -- Dec 21st 2018
ORGANIZATION
"Infinera Corporation"
CONTACT-INFO
"techsupport@infinera.com"
DESCRIPTION
"The performance measurement MIB.
- General
- 15 minute interval measurements per
measurement point
- 24 hour interval measurements per
measurement point
- Current meters and configuration per
interface
"
REVISION
"201812210000Z" -- Dec 21st 2018
DESCRIPTION
"Changes made for release r32.0:
- added new PM drop and egress counters"
REVISION
"201709010000Z" -- September 1st 2017
DESCRIPTION
"Changes made for release r30.0:
- added the emxp440 board"
REVISION
"201706150000Z" -- June 15th 2017
DESCRIPTION
"Changes made for release r29.0:
- Changed ORGANIZATION and CONTACT-INFO"
REVISION
"201605240000Z" -- May 24th 2016
DESCRIPTION
"Corrected pmMpoLanes table."
REVISION
"201604290000Z" -- April 29th 2016
DESCRIPTION
"Added ifno and upPortid in pmDrop."
REVISION
"201601110000Z" -- Jan 11th 2016
DESCRIPTION
"Added default value notPresent for operStatus."
REVISION
"201512030000Z" -- May 16th 2014
DESCRIPTION
"Added ifno and upportid in pmEthTd and pmIf."
REVISION
"201405160000Z" -- May 16th 2014
DESCRIPTION
"Improved descriptions for pmEthTd attributes."
REVISION
"201303270000Z" -- March 27th 2013
DESCRIPTION
"Added vlanId as attribute in pmEthTd.
Added alarmClearDelay annotation for ES, SES and UAS."
REVISION
"201110030000Z" -- October 3rd 2011
DESCRIPTION
"Changed longalias for Gbe utilization."
REVISION
"201103010000Z" -- March 1st 2011
DESCRIPTION
"Pm Interval tables to deprecated + some layer 2."
REVISION
"200803180000Z" -- March 18th 2008
DESCRIPTION
"Added ethernet traffic data, mgmt and OAM PM counters."
REVISION
"200709170000Z" -- September 17th 2007
DESCRIPTION
"Added last sequence numbers for PM files."
REVISION
"200503090000Z" -- March 9th 2005
DESCRIPTION
"Added support for PM log retrieval."
REVISION
"200410270000Z" -- October 27th 2004
DESCRIPTION
"Added maximimum GbE utilization for
24 hour and 15 minute intervals."
REVISION
"200406020000Z" -- June 2nd 2004
DESCRIPTION
"Added rxPowerLevel sample in 24h interval."
REVISION
"200209230000Z" -- September 23rd 2002
DESCRIPTION
"Added isSuspect15/24 for current values."
REVISION
"200208090000Z" -- August 9th 2002
DESCRIPTION
"Added sequence number for 15 min and 24 h pm files."
REVISION
"200205310000Z" -- May 31st 2002
DESCRIPTION
"Added pmIfRxPort."
REVISION
"200205170000Z" -- May 17th 2002
DESCRIPTION
"Added threshold configuration and pm log file tables.
Moved alarms from the wdm and multirate mibs."
REVISION
"200201170000Z" -- January 17th 2002
DESCRIPTION
"Removed the valid flag.
Invalid reports will return read error."
REVISION
"200201110000Z" -- January 11th 2002
DESCRIPTION
"The initial revision of this module."
::= { lumModules 16 }
-- ----------------------------------------------------
-- Conformance area, containing groups and compliance
-- specifications.
-- ----------------------------------------------------
lumPmConfs OBJECT IDENTIFIER ::= { lumPmMIB 1 }
lumPmGroups OBJECT IDENTIFIER ::= { lumPmConfs 1 }
lumPmCompl OBJECT IDENTIFIER ::= { lumPmConfs 2 }
-- ----------------------------------------------------
-- Root for objects in the pm MIB
-- ----------------------------------------------------
lumPmMIBObjects OBJECT IDENTIFIER ::= { lumPmMIB 2 }
-- ----------------------------------------------------
-- This MIB contains the following groups:
-- ----------------------------------------------------
pmGeneral OBJECT IDENTIFIER ::= { lumPmMIBObjects 1 }
pmInterval OBJECT IDENTIFIER ::= { lumPmMIBObjects 2 }
pmInterval24h OBJECT IDENTIFIER ::= { lumPmMIBObjects 3 }
lumentisPmNotifications OBJECT IDENTIFIER ::= { lumPmMIBObjects 4 }
pmFile OBJECT IDENTIFIER ::= { lumPmMIBObjects 5 }
pmIfList OBJECT IDENTIFIER ::= { lumPmMIBObjects 6 }
pmLogGeneral OBJECT IDENTIFIER ::= { lumPmMIBObjects 7 }
pmFile24h OBJECT IDENTIFIER ::= { lumPmMIBObjects 8 }
pmControl OBJECT IDENTIFIER ::= { lumPmMIBObjects 9 }
pmEthTdList OBJECT IDENTIFIER ::= { lumPmMIBObjects 10 }
pmEthTmList OBJECT IDENTIFIER ::= { lumPmMIBObjects 11 }
pmEthOamList OBJECT IDENTIFIER ::= { lumPmMIBObjects 12 }
pmEthDropList OBJECT IDENTIFIER ::= { lumPmMIBObjects 13 }
pmEthClassificationList OBJECT IDENTIFIER ::= { lumPmMIBObjects 14 }
pmMpoLanesList OBJECT IDENTIFIER ::= { lumPmMIBObjects 15 }
pmEthEgressList OBJECT IDENTIFIER ::= { lumPmMIBObjects 16 }
-- ----------------------------------------------------
-- Textual Conventions
-- ----------------------------------------------------
PmInterval15mNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A number which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently
completed interval, and the interval identified
by N is the interval immediately preceding the
one identified by N-1."
SYNTAX Unsigned32 (1..96)
PmInterval24hNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A number which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently
completed interval, and the interval identified
by N is the interval immediately preceding the
one identified by N-1."
SYNTAX Unsigned32 (1..40)
-- ----------------------------------------------------
-- General group
-- ----------------------------------------------------
pmGeneralLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the MIB was
last changed.
"
::= { pmGeneral 1 }
pmGeneralStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state of the MIB was last
changed.
"
::= { pmGeneral 2 }
pmGeneralPmIfTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of table.
"
::= { pmGeneral 3 }
pmGeneralPmEthTdTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of table.
"
::= { pmGeneral 4 }
pmGeneralPmEthTmTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Size of table.
"
::= { pmGeneral 5 }
pmGeneralPmEthOamTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Size of table.
"
::= { pmGeneral 6 }
pmGeneralPmEthDropTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of table.
"
::= { pmGeneral 7 }
pmGeneralPmEthClassificationTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of table.
"
::= { pmGeneral 8 }
pmGeneralPmMpoLanesTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of table.
"
::= { pmGeneral 9 }
-- ----------------------------------------------------
-- General log parameters group
-- ----------------------------------------------------
pmLogGeneralLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the PM log was last changed.
"
::= { pmLogGeneral 1 }
pmLogGeneralSize OBJECT-TYPE
SYNTAX Unsigned32 (0..96)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of logged 15 minute intervals.
"
DEFVAL { 32 }
::= { pmLogGeneral 2 }
pmLogGeneralSize24h OBJECT-TYPE
SYNTAX Unsigned32 (0..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of logged 24 hour intervals.
"
DEFVAL { 7 }
::= { pmLogGeneral 3 }
pmLogGeneralFileTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of rows available in the
15 minute file table.
"
::= { pmLogGeneral 4 }
pmLogGeneralFile24hTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of rows available in the
24 hour file table.
"
::= { pmLogGeneral 5 }
pmLogGeneralInterval15mTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of rows available in the
15 minute interval table.
"
::= { pmLogGeneral 6 }
pmLogGeneralInterval24hTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of rows available in the
24 hour interval table.
"
::= { pmLogGeneral 7 }
pmLogGeneralInterval15mShowNonZeroOnly OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Show only non zero intervals.
"
DEFVAL { on }
::= { pmLogGeneral 8 }
pmLogGeneralInterval24hShowNonZeroOnly OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Show only non zero intervals.
"
DEFVAL { on }
::= { pmLogGeneral 9 }
pmLogGeneralFile15mLastSeqNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last sequence number for 15 minute files.
"
::= { pmLogGeneral 10 }
pmLogGeneralFile24hLastSeqNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last sequence number for the 24 hour files.
"
::= { pmLogGeneral 11 }
-- ----------------------------------------------------
-- PM 15 minute interval log files
-- ----------------------------------------------------
pmFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The line tx 15 min interval table."
::= { pmFile 1 }
pmFileEntry OBJECT-TYPE
SYNTAX PmFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the 15 minute log file table.
"
INDEX { pmFileIndex }
::= { pmFileTable 1 }
PmFileEntry ::=
SEQUENCE {
pmFileIndex PmInterval15mNumber,
pmFileName DisplayString,
pmFileCreatedTime DateAndTime,
pmFileSeqNumber Counter32,
pmFileStartTime DateAndTime,
pmFileStopTime DateAndTime,
pmFileUrl DisplayString }
pmFileIndex OBJECT-TYPE
SYNTAX PmInterval15mNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently
completed interval, and the interval identified
by N is the interval immediately preceding the
one identified by N-1.
"
::= { pmFileEntry 1 }
pmFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the file.
"
::= { pmFileEntry 2 }
pmFileCreatedTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the file was created.
"
::= { pmFileEntry 3 }
pmFileSeqNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last sequence number used when issuing
a notification for this file.
"
::= { pmFileEntry 4 }
pmFileStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when collection started for this file.
"
::= { pmFileEntry 5 }
pmFileStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when collection stopped for this file.
"
::= { pmFileEntry 6 }
pmFileUrl OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The full path indicating where the file
can be found on the network element.
"
::= { pmFileEntry 7 }
-- ----------------------------------------------------
-- PM 15 minute intervals
-- ----------------------------------------------------
pmIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmIntervalEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The line tx 15 min interval table."
::= { pmInterval 1 }
pmIntervalEntry OBJECT-TYPE
SYNTAX PmIntervalEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the interval table.
"
INDEX { pmIntervalNumber,
pmIntervalSubrack,
pmIntervalSlot,
pmIntervalPort }
::= { pmIntervalTable 1 }
PmIntervalEntry ::=
SEQUENCE {
pmIntervalSubrack SubrackNumber,
pmIntervalSlot SlotNumber,
pmIntervalPort PortNumber,
pmIntervalNumber Unsigned32,
pmIntervalStartTime DateAndTime,
pmIntervalIsSuspect TruthValue,
pmIntervalRxES Gauge32,
pmIntervalRxSES Gauge32,
pmIntervalRxBBE Gauge32,
pmIntervalRxUAS Gauge32,
pmIntervalTxES Gauge32,
pmIntervalTxSES Gauge32,
pmIntervalTxBBE Gauge32,
pmIntervalTxUAS Gauge32,
pmIntervalName MgmtNameString,
pmIntervalRxPowerLevel Integer32,
pmIntervalGbeMaxUtilization Unsigned32,
pmIntervalTxPowerLevel Integer32,
pmIntervalStopTime DateAndTime,
-- Ethernet traffic data
pmIntervalRxUndersizedFrames Counter64,
pmIntervalRxOversizedFrames Counter64,
pmIntervalRxFragments Counter64,
pmIntervalRxFcsErrors Counter64,
pmIntervalRxInvalidCeVlanId Counter64,
pmIntervalTxOctets Counter64,
pmIntervalTxFrames Counter64,
pmIntervalTxUnicastFrames Counter64,
pmIntervalTxMulticastFrames Counter64,
pmIntervalTxBroadcastFrames Counter64,
pmIntervalRxOctets Counter64,
pmIntervalRxFrames Counter64,
pmIntervalRxUnicastFrames Counter64,
pmIntervalRxMulticastFrames Counter64,
pmIntervalRxBroadcastFrames Counter64,
pmIntervalRxEthMaxUtilization Unsigned32,
pmIntervalTxEthMaxUtilization Unsigned32,
-- Ethernet traffic mgmt
pmIntervalIngressGreenFrameCount Counter64,
pmIntervalIngressYellowFrameCount Counter64,
pmIntervalIngressRedFrameCount Counter64,
pmIntervalIngressGreenOctetCount Counter64,
pmIntervalIngressYellowOctetCount Counter64,
pmIntervalIngressRedOctetCount Counter64,
pmIntervalEgressGreenFrameCount Counter64,
pmIntervalEgressGreenOctetCount Counter64,
pmIntervalGreenFrameDiscards Counter64,
pmIntervalYellowFrameDiscards Counter64,
pmIntervalGreenOctetDiscards Counter64,
pmIntervalYellowOctetDiscards Counter64,
-- Ethernet OAM
pmIntervalTwoWayFrameDelay Gauge32,
pmIntervalTwoWayFrameDelayVariation Gauge32,
pmIntervalFrameLossRatioNearEnd Gauge32,
pmIntervalFrameLossRatioFarEnd Gauge32,
pmIntervalUnavailabilityNearEnd Gauge32,
pmIntervalUnavailabilityFarEnd Gauge32,
pmIntervalOneWayFrameDelayVariation Gauge32 }
pmIntervalSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subrack number for the interface in question.
"
::= { pmIntervalEntry 1 }
pmIntervalSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot number for the interface in question.
"
::= { pmIntervalEntry 2 }
pmIntervalPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number for the interface in question.
"
::= { pmIntervalEntry 3 }
pmIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number between 1 and 40, which identifies the
interval for which the set of statistics is
available. The interval identified by 1 is the
most recently completed 24 hour interval, and the
interval identified by N is the interval
immediately preceding the one identified by N-1.
"
::= { pmIntervalEntry 4 }
pmIntervalIsSuspect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interval is suspect. The interval may for example
contain measurements for a part of the interval.
"
::= { pmIntervalEntry 5 }
pmIntervalRxES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in a particular 15 min interval
during the past 15 min intervals.
"
::= { pmIntervalEntry 6 }
pmIntervalRxSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in a particular 15 min
interval during the past 15 min intervals.
"
::= { pmIntervalEntry 7 }
pmIntervalRxBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in a particular 15 min
interval.
"
::= { pmIntervalEntry 8 }
pmIntervalRxUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds in a particular 15 min
interval.
"
::= { pmIntervalEntry 9 }
pmIntervalTxES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in a particular 15 min interval.
"
::= { pmIntervalEntry 10 }
pmIntervalTxSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in a particular 15 min
interval.
"
::= { pmIntervalEntry 11 }
pmIntervalTxBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in the current 15 min
interval.
"
::= { pmIntervalEntry 12 }
pmIntervalTxUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds in a particular 15 min
interval.
"
::= { pmIntervalEntry 13 }
pmIntervalName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the interface.
"
::= { pmIntervalEntry 14 }
pmIntervalRxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received power level in units of 0.1 dBm
sampled some time during a particular 15 minute
interval.
"
::= { pmIntervalEntry 15 }
pmIntervalGbeMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum bandwidth utilization of the
GbE signal during a particular 15 minute interval.
"
::= { pmIntervalEntry 16 }
pmIntervalTxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmitted power level in units of 0.1 dBm
sampled some time during a particular 15 minute
interval.
"
::= { pmIntervalEntry 17 }
pmIntervalRxUndersizedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of undersized frames
during a particular 15 minute interval.
"
::= { pmIntervalEntry 18 }
pmIntervalRxOversizedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of oversized frames
during a particular 15 minute interval.
"
::= { pmIntervalEntry 19 }
pmIntervalRxFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of fragments
during a particular 15 minute interval.
"
::= { pmIntervalEntry 20 }
pmIntervalRxFcsErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames with FCS or alignment errors
during a particular 15 minute interval.
"
::= { pmIntervalEntry 21 }
pmIntervalRxInvalidCeVlanId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames with invalid CE-VLAN id
during a particular 15 minute interval.
"
::= { pmIntervalEntry 22 }
pmIntervalTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of octets transmitted OK
during a particular 15 minute interval.
"
::= { pmIntervalEntry 23 }
pmIntervalTxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames transmitted OK
during a particular 15 minute interval.
"
::= { pmIntervalEntry 24 }
pmIntervalTxUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of unicast frames transmitted OK
during a particular 15 minute interval.
"
::= { pmIntervalEntry 25 }
pmIntervalTxMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames transmitted OK
during a particular 15 minute interval.
"
::= { pmIntervalEntry 26 }
pmIntervalTxBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of broadcast frames transmitted OK
during a particular 15 minute interval.
"
::= { pmIntervalEntry 27 }
pmIntervalRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of octets received OK
during a particular 15 minute interval.
"
::= { pmIntervalEntry 28 }
pmIntervalRxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames received OK
during a particular 15 minute interval.
"
::= { pmIntervalEntry 29 }
pmIntervalRxUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of unicast frames received OK
during a particular 15 minute interval.
"
::= { pmIntervalEntry 30 }
pmIntervalRxMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames received OK
during a particular 15 minute interval.
"
::= { pmIntervalEntry 31 }
pmIntervalRxBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of broadcast frames received OK
during a particular 15 minute interval.
"
::= { pmIntervalEntry 32 }
pmIntervalIngressGreenFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames sent by the ingress UNI
during a particular 15 minute interval.
"
::= { pmIntervalEntry 33 }
pmIntervalIngressYellowFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow frames sent by the ingress UNI
during a particular 15 minute interval.
"
::= { pmIntervalEntry 34 }
pmIntervalIngressRedFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of red frames sent by the ingress UNI
during a particular 15 minute interval.
"
::= { pmIntervalEntry 35 }
pmIntervalIngressGreenOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets sent by the ingress UNI
during a particular 15 minute interval.
"
::= { pmIntervalEntry 36 }
pmIntervalIngressYellowOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow octets sent by the ingress UNI
during a particular 15 minute interval.
"
::= { pmIntervalEntry 37 }
pmIntervalIngressRedOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of red octects sent by the ingress UNI
during a particular 15 minute interval.
"
::= { pmIntervalEntry 38 }
pmIntervalEgressGreenFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames received by the egress UNI
during a particular 15 minute interval.
"
::= { pmIntervalEntry 39 }
pmIntervalEgressGreenOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets received by the egress UNI
during a particular 15 minute interval.
"
::= { pmIntervalEntry 40 }
pmIntervalGreenFrameDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames discarded due to congestion
during a particular 15 minute interval.
"
::= { pmIntervalEntry 41 }
pmIntervalYellowFrameDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow frames discarded due to congestion
during a particular 15 minute interval.
"
::= { pmIntervalEntry 42 }
pmIntervalGreenOctetDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets discarded due to congestion
during a particular 15 minute interval.
"
::= { pmIntervalEntry 43 }
pmIntervalYellowOctetDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow octets discarded due to congestion
during a particular 15 minute interval.
"
::= { pmIntervalEntry 44 }
pmIntervalTwoWayFrameDelay OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time required to transmit a service frame from source to destination
during a particular 15 minute interval.
"
::= { pmIntervalEntry 45 }
pmIntervalTwoWayFrameDelayVariation OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The difference in delay between two service frames
during a particular 15 minute interval.
"
::= { pmIntervalEntry 46 }
pmIntervalFrameLossRatioNearEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of service frames not delivered divided by the total number of service frames at near end
during a particular 15 minute interval.
"
::= { pmIntervalEntry 47 }
pmIntervalFrameLossRatioFarEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of service frames not delivered divided
by the total number of service frames at far end
during a particular 15 minute interval.
"
::= { pmIntervalEntry 48 }
pmIntervalUnavailabilityNearEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The @todo
during a particular 15 minute interval.
"
::= { pmIntervalEntry 49 }
pmIntervalUnavailabilityFarEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The @todo
during a particular 15 minute interval.
"
::= { pmIntervalEntry 50 }
pmIntervalOneWayFrameDelayVariation OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The difference in delay between two service frames
during a particular 15 minute interval.
"
::= { pmIntervalEntry 51 }
pmIntervalTxEthMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum layer 2 bandwidth utilization of the
transmitted ethernet signal during a particular 15 minute interval.
"
::= { pmIntervalEntry 52 }
pmIntervalRxEthMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum layer 2 bandwidth utilization of the
received ethernet signal during a particular 15 minute interval.
"
::= { pmIntervalEntry 53 }
pmIntervalStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time of the quarter where
PM-reports are generated
"
::= { pmIntervalEntry 54 }
pmIntervalStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The end time of the quarter where
PM-reports are generated
"
::= { pmIntervalEntry 55 }
-- ----------------------------------------------------
-- PM 24 hour interval log files
-- ----------------------------------------------------
pmFile24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF Pm24hFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The line tx 24 hour interval table."
::= { pmFile24h 1 }
pmFile24hEntry OBJECT-TYPE
SYNTAX Pm24hFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the 24 hour log file table.
"
INDEX { pmFile24hIndex }
::= { pmFile24hTable 1 }
Pm24hFileEntry ::=
SEQUENCE {
pmFile24hIndex PmInterval24hNumber,
pmFile24hName DisplayString,
pmFile24hCreatedTime DateAndTime,
pmFile24hSeqNumber Counter32,
pmFile24hStartTime DateAndTime,
pmFile24hStopTime DateAndTime,
pmFile24hUrl DisplayString }
pmFile24hIndex OBJECT-TYPE
SYNTAX PmInterval24hNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently
completed interval, and the interval identified
by N is the interval immediately preceding the
one identified by N-1.
"
::= { pmFile24hEntry 1 }
pmFile24hName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the file.
"
::= { pmFile24hEntry 2 }
pmFile24hCreatedTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the file was created.
"
::= { pmFile24hEntry 3 }
pmFile24hSeqNumber OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last sequence number used when issuing
a notification for this file.
"
::= { pmFile24hEntry 4 }
pmFile24hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when collection started for this file.
"
::= { pmFile24hEntry 5 }
pmFile24hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when collection stopped for this file.
"
::= { pmFile24hEntry 6 }
pmFile24hUrl OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The full path indicating where the file
can be found on the network element.
"
::= { pmFile24hEntry 7 }
-- ----------------------------------------------------
-- PM 24 hour intervals
-- ----------------------------------------------------
pmInterval24hTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmInterval24hEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The line tx 24 hour interval table."
::= { pmInterval24h 1 }
pmInterval24hEntry OBJECT-TYPE
SYNTAX PmInterval24hEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the interval table.
"
INDEX { pmInterval24hNumber,
pmInterval24hSubrack,
pmInterval24hSlot,
pmInterval24hPort }
::= { pmInterval24hTable 1 }
PmInterval24hEntry ::=
SEQUENCE {
pmInterval24hSubrack SubrackNumber,
pmInterval24hSlot SlotNumber,
pmInterval24hPort PortNumber,
pmInterval24hNumber PmInterval24hNumber,
pmInterval24hStartTime DateAndTime,
pmInterval24hIsSuspect TruthValue,
pmInterval24hRxES Gauge32,
pmInterval24hRxSES Gauge32,
pmInterval24hRxBBE Gauge32,
pmInterval24hRxUAS Gauge32,
pmInterval24hTxES Gauge32,
pmInterval24hTxSES Gauge32,
pmInterval24hTxBBE Gauge32,
pmInterval24hTxUAS Gauge32,
pmInterval24hName MgmtNameString,
pmInterval24hRxPowerLevel Integer32,
pmInterval24hGbeMaxUtilization Unsigned32,
pmInterval24hTxPowerLevel Integer32,
pmInterval24hStopTime DateAndTime,
-- Ethernet traffic data
pmInterval24hRxUndersizedFrames Counter64,
pmInterval24hRxOversizedFrames Counter64,
pmInterval24hRxFragments Counter64,
pmInterval24hRxFcsErrors Counter64,
pmInterval24hRxInvalidCeVlanId Counter64,
pmInterval24hTxOctets Counter64,
pmInterval24hTxFrames Counter64,
pmInterval24hTxUnicastFrames Counter64,
pmInterval24hTxMulticastFrames Counter64,
pmInterval24hTxBroadcastFrames Counter64,
pmInterval24hRxOctets Counter64,
pmInterval24hRxFrames Counter64,
pmInterval24hRxUnicastFrames Counter64,
pmInterval24hRxMulticastFrames Counter64,
pmInterval24hRxBroadcastFrames Counter64,
pmInterval24hTxEthMaxUtilization Unsigned32,
pmInterval24hRxEthMaxUtilization Unsigned32,
-- Ethernet traffic mgmt
pmInterval24hIngressGreenFrameCount Counter64,
pmInterval24hIngressYellowFrameCount Counter64,
pmInterval24hIngressRedFrameCount Counter64,
pmInterval24hIngressGreenOctetCount Counter64,
pmInterval24hIngressYellowOctetCount Counter64,
pmInterval24hIngressRedOctetCount Counter64,
pmInterval24hEgressGreenFrameCount Counter64,
pmInterval24hEgressGreenOctetCount Counter64,
pmInterval24hGreenFrameDiscards Counter64,
pmInterval24hYellowFrameDiscards Counter64,
pmInterval24hGreenOctetDiscards Counter64,
pmInterval24hYellowOctetDiscards Counter64,
-- Ethernet OAM
pmInterval24hTwoWayFrameDelay Gauge32,
pmInterval24hTwoWayFrameDelayVariation Gauge32,
pmInterval24hFrameLossRatioNearEnd Gauge32,
pmInterval24hFrameLossRatioFarEnd Gauge32,
pmInterval24hUnavailabilityNearEnd Gauge32,
pmInterval24hUnavailabilityFarEnd Gauge32,
pmInterval24hOneWayFrameDelayVariation Gauge32 }
pmInterval24hSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subrack number for the interface in question.
"
::= { pmInterval24hEntry 1 }
pmInterval24hSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot number for the interface in question.
"
::= { pmInterval24hEntry 2 }
pmInterval24hPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number for the interface in question.
"
::= { pmInterval24hEntry 3 }
pmInterval24hNumber OBJECT-TYPE
SYNTAX PmInterval24hNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number between 1 and 40, which identifies the
interval for which the set of statistics is
available. The interval identified by 1 is the most
recently completed 24 hour interval, and the
interval identified by N is the interval
immediately preceding the one identified by N-1.
"
::= { pmInterval24hEntry 4 }
pmInterval24hIsSuspect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interval is suspect. The interval may for example
contain measurements for a part of the interval.
"
::= { pmInterval24hEntry 5 }
pmInterval24hRxES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in a particular 24 hour interval.
"
::= { pmInterval24hEntry 6 }
pmInterval24hRxSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in a particular 24 hour
interval.
"
::= { pmInterval24hEntry 7 }
pmInterval24hRxBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in a particular 24 hour
interval.
"
::= { pmInterval24hEntry 8 }
pmInterval24hRxUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds in a particular 24 hour
interval.
"
::= { pmInterval24hEntry 9 }
pmInterval24hTxES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in a particular 24 hour interval.
"
::= { pmInterval24hEntry 10 }
pmInterval24hTxSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in a particular 24 hour
interval.
"
::= { pmInterval24hEntry 11 }
pmInterval24hTxBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in a particular 24 hour
interval.
"
::= { pmInterval24hEntry 12 }
pmInterval24hTxUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds in a particular 24 hour
interval.
"
::= { pmInterval24hEntry 13 }
pmInterval24hName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the interface.
"
::= { pmInterval24hEntry 14 }
pmInterval24hRxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received power level in units of 0.1 dBm
sampled some time during a particular 24 hour
interval.
"
::= { pmInterval24hEntry 15 }
pmInterval24hGbeMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum bandwidth utilization of the
GbE signal during a particular 24 hour interval.
"
::= { pmInterval24hEntry 16 }
pmInterval24hTxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmitted power level in units of 0.1 dBm
sampled some time during a particular 24 hour
interval.
"
::= { pmInterval24hEntry 17 }
pmInterval24hRxUndersizedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of undersized frames
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 18 }
pmInterval24hRxOversizedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of oversized frames
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 19 }
pmInterval24hRxFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of fragments
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 20 }
pmInterval24hRxFcsErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames with FCS or alignment errors
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 21 }
pmInterval24hRxInvalidCeVlanId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames with invalid CE-VLAN id
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 22 }
pmInterval24hTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of octets transmitted OK
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 23 }
pmInterval24hTxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames transmitted OK
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 24 }
pmInterval24hTxUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of unicast frames transmitted OK
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 25 }
pmInterval24hTxMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames transmitted OK
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 26 }
pmInterval24hTxBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames transmitted OK
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 27 }
pmInterval24hRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of octets received OK
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 28 }
pmInterval24hRxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames received OK
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 29 }
pmInterval24hRxUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of unicast frames received OK
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 30 }
pmInterval24hRxMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames received OK
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 31 }
pmInterval24hRxBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of broadcast frames received OK
during a particular 24 hour interval.
"
::= {pmInterval24hEntry 32 }
pmInterval24hIngressGreenFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames sent by ingress UNI
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 33 }
pmInterval24hIngressYellowFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow frames sent by ingress UNI
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 34 }
pmInterval24hIngressRedFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of red frames sent by ingress UNI
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 35 }
pmInterval24hIngressGreenOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets sent by ingress UNI
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 36 }
pmInterval24hIngressYellowOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow octets sent by ingress UNI
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 37 }
pmInterval24hIngressRedOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of red octets sent by ingress UNI
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 38 }
pmInterval24hEgressGreenFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames received by egress UNI
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 39 }
pmInterval24hEgressGreenOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets received by egress UNI
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 40 }
pmInterval24hGreenFrameDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames discarded due to congestion
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 41 }
pmInterval24hYellowFrameDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow frames discarded due to congestion
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 42 }
pmInterval24hGreenOctetDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets discarded due to congestion
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 43 }
pmInterval24hYellowOctetDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow octets discarded due to congestion
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 44 }
pmInterval24hTwoWayFrameDelay OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time required to transmit a service frame from
source to destination during a particular 24 hour
interval.
"
::= { pmInterval24hEntry 45 }
pmInterval24hTwoWayFrameDelayVariation OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The difference in delay of two service frames
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 46 }
pmInterval24hFrameLossRatioNearEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of service frames not delivered divided
by the total number of service frames at near end
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 47 }
pmInterval24hFrameLossRatioFarEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of service frames not delivered divided
by the total number of service frames at far end
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 48 }
pmInterval24hUnavailabilityNearEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The @todo
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 49 }
pmInterval24hUnavailabilityFarEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The @todo
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 50 }
pmInterval24hOneWayFrameDelayVariation OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The difference in delay of two service frames
during a particular 24 hour interval.
"
::= { pmInterval24hEntry 51 }
pmInterval24hTxEthMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum layer 2 bandwidth utilization of the
transmitted ethernet signal during a particular 24
hour interval.
"
::= { pmInterval24hEntry 52 }
pmInterval24hRxEthMaxUtilization OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum layer 2 bandwidth utilization of the
received ethernet signal during a particular 24 hour
interval.
"
::= { pmInterval24hEntry 53 }
pmInterval24hStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time of the quarter where
PM-reports are generated
"
::= { pmInterval24hEntry 54 }
pmInterval24hStopTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The end time of the quarter where
PM-reports are generated
"
::= { pmInterval24hEntry 55 }
-- ----------------------------------------------------
-- PM configuration and current meters
-- ----------------------------------------------------
pmIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pm interface table."
::= { pmIfList 1 }
pmIfEntry OBJECT-TYPE
SYNTAX PmIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in interface table.
"
INDEX { pmIfIndex }
::= { pmIfTable 1 }
PmIfEntry ::=
SEQUENCE {
pmIfIndex Unsigned32,
pmIfName MgmtNameString,
pmIfSubrack SubrackNumber,
pmIfSlot SlotNumber,
pmIfPort PortNumber,
pmIfPmReportMode INTEGER,
pmIfRxCurrentES Gauge32,
pmIfRxCurrentSES Gauge32,
pmIfRxCurrentBBE Gauge32,
pmIfRxCurrentUAS Gauge32,
pmIfTxCurrentES Gauge32,
pmIfTxCurrentSES Gauge32,
pmIfTxCurrentBBE Gauge32,
pmIfTxCurrentUAS Gauge32,
pmIfRx24hCurrentES Gauge32,
pmIfRx24hCurrentSES Gauge32,
pmIfRx24hCurrentBBE Gauge32,
pmIfRx24hCurrentUAS Gauge32,
pmIfTx24hCurrentES Gauge32,
pmIfTx24hCurrentSES Gauge32,
pmIfTx24hCurrentBBE Gauge32,
pmIfTx24hCurrentUAS Gauge32,
pmIfRxESThreshold Unsigned32,
pmIfRxSESThreshold Unsigned32,
pmIfRxBBEThreshold Unsigned32,
pmIfRxUASThreshold Unsigned32,
pmIfTxESThreshold Unsigned32,
pmIfTxSESThreshold Unsigned32,
pmIfTxBBEThreshold Unsigned32,
pmIfTxUASThreshold Unsigned32,
pmIfRx24hESThreshold Unsigned32,
pmIfRx24hSESThreshold Unsigned32,
pmIfRx24hBBEThreshold Unsigned32,
pmIfRx24hUASThreshold Unsigned32,
pmIfTx24hESThreshold Unsigned32,
pmIfTx24hSESThreshold Unsigned32,
pmIfTx24hBBEThreshold Unsigned32,
pmIfTx24hUASThreshold Unsigned32,
pmIfRxES FaultStatus,
pmIfRxSES FaultStatus,
pmIfRxBBE FaultStatus,
pmIfRxUAS FaultStatus,
pmIfTxES FaultStatus,
pmIfTxSES FaultStatus,
pmIfTxBBE FaultStatus,
pmIfTxUAS FaultStatus,
pmIfRx24hES FaultStatus,
pmIfRx24hSES FaultStatus,
pmIfRx24hBBE FaultStatus,
pmIfRx24hUAS FaultStatus,
pmIfTx24hES FaultStatus,
pmIfTx24hSES FaultStatus,
pmIfTx24hBBE FaultStatus,
pmIfTx24hUAS FaultStatus,
pmIfRxPort PortNumber,
pmIfReset15Min INTEGER,
pmIfReset24H INTEGER,
pmIfAdminStatus BoardOrInterfaceAdminStatus,
pmIfOperStatus BoardOrInterfaceOperStatus,
pmIfIsSuspect15Min TruthValue,
pmIfIsSuspect24H TruthValue,
pmIfInstallCommand CommandString,
pmIfRxPowerLevel Integer32,
pmIfInitialPowerLevel Integer32,
pmIfRxGbeMaxUtilization Gauge32,
pmIfRx24hGbeMaxUtilization Gauge32,
pmIfTxPowerLevel Integer32,
pmIfObjectProperty ObjectProperty,
pmIfDelay Gauge32,
pmIfRxBEREstimation Unsigned32,
pmIfIfNo PortNumber,
pmIfUpPortId Integer32
}
pmIfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index assigned to each if entry.
"
::= { pmIfEntry 1 }
pmIfName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the interface, for
example 'mrt:1:2:1-2'.
"
::= { pmIfEntry 2 }
pmIfSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the subrack where the interface
is located.
"
::= { pmIfEntry 3 }
pmIfSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the slot where the interface is
located.
"
::= { pmIfEntry 4 }
pmIfPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the TX port for the interface.
"
::= { pmIfEntry 5 }
pmIfPmReportMode OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode PM reporting on the interface.
off - PM reporting is inactive.
on - PM reporting is activated.
"
DEFVAL { on }
::= { pmIfEntry 6 }
pmIfRxCurrentES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in the current 15 minute interval.
"
::= { pmIfEntry 7 }
pmIfRxCurrentSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in the current 15 minute
interval.
"
::= { pmIfEntry 8 }
pmIfRxCurrentBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in the current 15 minute
interval.
"
::= { pmIfEntry 9 }
pmIfRxCurrentUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds in the current 15 minute
interval.
"
::= { pmIfEntry 10 }
pmIfTxCurrentES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in the current 15 minute interval.
"
::= { pmIfEntry 11 }
pmIfTxCurrentSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in the current 15 minute
interval.
"
::= { pmIfEntry 12 }
pmIfTxCurrentBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in in the current
15 minute interval.
"
::= { pmIfEntry 13 }
pmIfTxCurrentUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds encountered in the current
15 minute interval.
"
::= { pmIfEntry 14 }
pmIfRx24hCurrentES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in the current 24 hour interval.
"
::= { pmIfEntry 15 }
pmIfRx24hCurrentSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in the current 24 hour
interval.
"
::= { pmIfEntry 16 }
pmIfRx24hCurrentBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in the current 24 hour
interval.
"
::= { pmIfEntry 17 }
pmIfRx24hCurrentUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds encountered in the current
24 hour interval.
"
::= { pmIfEntry 18 }
pmIfTx24hCurrentES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in the current 24 hour interval.
"
::= { pmIfEntry 19 }
pmIfTx24hCurrentSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in the current 24 hour
interval.
"
::= { pmIfEntry 20 }
pmIfTx24hCurrentBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in the current 24 hour
interval.
"
::= { pmIfEntry 21 }
pmIfTx24hCurrentUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds encountered in the current
24 hour interval.
"
::= { pmIfEntry 22 }
pmIfRxESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
errored seconds alarm.
"
DEFVAL { 20 }
::= { pmIfEntry 23 }
pmIfRxSESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
severely errored seconds alarm.
"
DEFVAL { 10 }
::= { pmIfEntry 24 }
pmIfRxBBEThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
background block errors alarms.
"
DEFVAL { 100000 }
::= { pmIfEntry 25 }
pmIfRxUASThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
unavailable seconds alarm.
"
DEFVAL { 30 }
::= { pmIfEntry 26 }
pmIfTxESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
errored seconds alarm.
"
DEFVAL { 20 }
::= { pmIfEntry 27 }
pmIfTxSESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
severely errored seconds alarm.
"
DEFVAL { 10 }
::= { pmIfEntry 28 }
pmIfTxBBEThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
background block errors alarms.
"
DEFVAL { 100000 }
::= { pmIfEntry 29 }
pmIfTxUASThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
unavailable seconds alarm.
"
DEFVAL { 30 }
::= { pmIfEntry 30 }
pmIfRx24hESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
errored seconds alarm.
"
DEFVAL { 200 }
::= { pmIfEntry 31 }
pmIfRx24hSESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
severely errored seconds alarm.
"
DEFVAL { 100 }
::= { pmIfEntry 32 }
pmIfRx24hBBEThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
background block errors alarms.
"
DEFVAL { 1000000 }
::= { pmIfEntry 33 }
pmIfRx24hUASThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
unavailable seconds alarm.
"
DEFVAL { 300 }
::= { pmIfEntry 34 }
pmIfTx24hESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
errored seconds alarm.
"
DEFVAL { 200 }
::= { pmIfEntry 35 }
pmIfTx24hSESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
severely errored seconds alarm.
"
DEFVAL { 100 }
::= { pmIfEntry 36 }
pmIfTx24hBBEThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
background block errors alarms.
"
DEFVAL { 1000000 }
::= { pmIfEntry 37 }
pmIfTx24hUASThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
unavailable seconds alarm.
"
DEFVAL { 300 }
::= { pmIfEntry 38 }
pmIfRxES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errored seconds (ES) Rx 15 min threshold
exceeded.
A: The number of errored seconds during a period
exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated ES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 30 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 39 }
pmIfRxSES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely errored seconds (SES) Rx 15 min
threshold exceeded.
A: The number of severely errored seconds during
a period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated SES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 20 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 40 }
pmIfRxBBE OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background block errors (BBE) Rx 15 min
threshold exceeded.
A: The number of background block errors
during a period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated BBE counter is reset to zero, by
definition. At the same time the fault status
is cleared.
"
::= { pmIfEntry 41 }
pmIfRxUAS OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (UAS) Rx 15 min threshold
exceeded.
A: The number of unavailable seconds during a
period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated UAS counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 45 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 42 }
pmIfTxES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errored seconds (ES) Tx 15 min threshold
exceeded.
A: The number of errored seconds during a period
exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated ES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 30 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 43 }
pmIfTxSES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely errored seconds (SES) Tx 15 min
threshold exceeded.
A: The number of severely errored seconds during
a period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated SES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 20 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 44 }
pmIfTxBBE OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background block errors (BBE) Tx 15 min
threshold exceeded.
A: The number of background block errors
during a period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated BBE counter is reset to zero, by
definition. At the same time the fault status
is cleared.
"
::= { pmIfEntry 45 }
pmIfTxUAS OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (UAS) Tx 15 min threshold
exceeded.
A: The number of unavailable seconds during a period
exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated UAS counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 45 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 46 }
pmIfRx24hES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errored seconds (ES) Rx 24 hour threshold
exceeded.
A: The number of errored seconds during a period
exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated ES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 300 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 47 }
pmIfRx24hSES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely errored seconds (SES) Rx 24 hour
threshold exceeded.
A: The number of severely errored seconds during
a period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated SES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 150 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 48 }
pmIfRx24hBBE OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background block errors (BBE) Rx 24 hour
threshold exceeded.
A: The number of background block errors
during a period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated BBE counter is reset to zero, by
definition. At the same time the fault status
is cleared.
"
::= { pmIfEntry 49 }
pmIfRx24hUAS OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (UAS) Rx 24 hour threshold
exceeded.
A: The number of unavailable seconds during a period
exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated UAS counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 400 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 50 }
pmIfTx24hES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errored seconds Tx (ES) 24 hour threshold
exceeded.
A: The number of errored seconds during a period
exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated ES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 300 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 51 }
pmIfTx24hSES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely errored seconds (SES) Tx 24 hour
threshold exceeded.
A: The number of severely errored seconds during
a period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated SES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 150 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 52 }
pmIfTx24hBBE OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background block errors (BBE) Tx 24 hour
threshold exceeded.
A: The number of background block errors
during a period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated BBE counter is reset to zero, by
definition. At the same time the fault status
is cleared.
"
::= { pmIfEntry 53 }
pmIfTx24hUAS OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (UAS) Tx 24 hour threshold
exceeded.
A: The number of unavailable seconds during a
period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated UAS counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 400 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmIfEntry 54 }
pmIfRxPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the RX port for the interface.
"
::= { pmIfEntry 55 }
pmIfReset15Min OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 15 minute PM counters for the
interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset15m reset
"
DEFVAL { normal }
::= { pmIfEntry 56 }
pmIfReset24H OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 24 hour PM counters for the interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset24h reset
"
DEFVAL { normal }
::= { pmIfEntry 57 }
pmIfAdminStatus OBJECT-TYPE
SYNTAX BoardOrInterfaceAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative state for the PM object.
down - Alarms are not sent.
up - Alarms are sent
service - Alarms are not sent
"
DEFVAL { up }
::= { pmIfEntry 58 }
pmIfOperStatus OBJECT-TYPE
SYNTAX BoardOrInterfaceOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state for the PM object.
notPresent - The physical resource is not available.
down - The object is disabled.
up - The object is enabled.
"
DEFVAL { notPresent }
::= { pmIfEntry 59 }
pmIfIsSuspect15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
"
::= { pmIfEntry 60 }
pmIfIsSuspect24H OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
"
::= { pmIfEntry 61 }
pmIfInstallCommand OBJECT-TYPE
SYNTAX CommandString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Generic command to perform installation tasks.
Tasks:
rxPower - measure the received power
"
::= { pmIfEntry 62 }
pmIfRxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received power level in units of 0.1 dBm
"
::= { pmIfEntry 63 }
pmIfInitialPowerLevel OBJECT-TYPE
SYNTAX Integer32 (-10000..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The received power level in units of 0.1 dBm
measured at installation of the link.
"
DEFVAL { -10000 }
::= { pmIfEntry 64 }
pmIfRxGbeMaxUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum bandwidth utilization of the
ethernet signal during the current 15 min
interval.
"
::= { pmIfEntry 65 }
pmIfRx24hGbeMaxUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum bandwidth utilization of the
ethernet signal during the current 24 h
interval.
"
::= { pmIfEntry 66 }
pmIfTxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmitted power level in units of 0.1 dBm
"
::= { pmIfEntry 67 }
pmIfObjectProperty OBJECT-TYPE
SYNTAX ObjectProperty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Property mask.
"
::= { pmIfEntry 68 }
pmIfDelay OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The delay of the signal.
"
::= { pmIfEntry 69 }
pmIfRxBEREstimation OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated Bit Error Rate after FEC.
"
::= { pmIfEntry 70 }
pmIfIfNo OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface number of the port.
"
::= { pmIfEntry 71 }
pmIfUpPortId OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Internal port reference for traffic unit.
"
DEFVAL { -1 }
::= { pmIfEntry 72 }
-- ----------------------------------------------------
-- PM configuration and current meters
-- ----------------------------------------------------
pmMpoLanesTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmMpoLanesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pm interface table."
::= { pmMpoLanesList 1 }
pmMpoLanesEntry OBJECT-TYPE
SYNTAX PmMpoLanesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in interface table.
"
INDEX { pmMpoLanesIndex }
::= { pmMpoLanesTable 1 }
PmMpoLanesEntry ::=
SEQUENCE {
pmMpoLanesIndex Unsigned32,
pmMpoLanesName MgmtNameString,
pmMpoLanesSubrack SubrackNumber,
pmMpoLanesSlot SlotNumber,
pmMpoLanesLaneId Unsigned32,
pmMpoLanesAdminStatus BoardOrInterfaceAdminStatus,
pmMpoLanesOperStatus BoardOrInterfaceOperStatus,
pmMpoLanesIsSuspect15Min TruthValue,
pmMpoLanesIsSuspect24H TruthValue,
pmMpoLanesPmReportMode OnOff,
pmMpoLanesRxCurrentES Gauge32,
pmMpoLanesRxCurrentSES Gauge32,
pmMpoLanesRxCurrentBBE Gauge32,
pmMpoLanesRxCurrentUAS Gauge32,
pmMpoLanesTxCurrentES Gauge32,
pmMpoLanesTxCurrentSES Gauge32,
pmMpoLanesTxCurrentBBE Gauge32,
pmMpoLanesTxCurrentUAS Gauge32,
pmMpoLanesRx24hCurrentES Gauge32,
pmMpoLanesRx24hCurrentSES Gauge32,
pmMpoLanesRx24hCurrentBBE Gauge32,
pmMpoLanesRx24hCurrentUAS Gauge32,
pmMpoLanesTx24hCurrentES Gauge32,
pmMpoLanesTx24hCurrentSES Gauge32,
pmMpoLanesTx24hCurrentBBE Gauge32,
pmMpoLanesTx24hCurrentUAS Gauge32,
pmMpoLanesRxESThreshold Unsigned32,
pmMpoLanesRxSESThreshold Unsigned32,
pmMpoLanesRxBBEThreshold Unsigned32,
pmMpoLanesRxUASThreshold Unsigned32,
pmMpoLanesTxESThreshold Unsigned32,
pmMpoLanesTxSESThreshold Unsigned32,
pmMpoLanesTxBBEThreshold Unsigned32,
pmMpoLanesTxUASThreshold Unsigned32,
pmMpoLanesRx24hESThreshold Unsigned32,
pmMpoLanesRx24hSESThreshold Unsigned32,
pmMpoLanesRx24hBBEThreshold Unsigned32,
pmMpoLanesRx24hUASThreshold Unsigned32,
pmMpoLanesTx24hESThreshold Unsigned32,
pmMpoLanesTx24hSESThreshold Unsigned32,
pmMpoLanesTx24hBBEThreshold Unsigned32,
pmMpoLanesTx24hUASThreshold Unsigned32,
pmMpoLanesRxES FaultStatus,
pmMpoLanesRxSES FaultStatus,
pmMpoLanesRxBBE FaultStatus,
pmMpoLanesRxUAS FaultStatus,
pmMpoLanesTxES FaultStatus,
pmMpoLanesTxSES FaultStatus,
pmMpoLanesTxBBE FaultStatus,
pmMpoLanesTxUAS FaultStatus,
pmMpoLanesRx24hES FaultStatus,
pmMpoLanesRx24hSES FaultStatus,
pmMpoLanesRx24hBBE FaultStatus,
pmMpoLanesRx24hUAS FaultStatus,
pmMpoLanesTx24hES FaultStatus,
pmMpoLanesTx24hSES FaultStatus,
pmMpoLanesTx24hBBE FaultStatus,
pmMpoLanesTx24hUAS FaultStatus,
pmMpoLanesReset15Min INTEGER,
pmMpoLanesReset24H INTEGER,
pmMpoLanesRxPowerLevel Integer32,
pmMpoLanesTxPowerLevel Integer32,
pmMpoLanesObjectProperty ObjectProperty,
pmMpoLanesIfNo PortNumber,
pmMpoLanesUpPortId Integer32
}
pmMpoLanesIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index assigned to each if entry.
"
::= { pmMpoLanesEntry 1 }
pmMpoLanesName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the interface, for
example 'mrt:1:2:1-2'.
"
::= { pmMpoLanesEntry 2 }
pmMpoLanesSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the subrack where the interface
is located.
"
::= { pmMpoLanesEntry 3 }
pmMpoLanesSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the slot where the interface is
located.
"
::= { pmMpoLanesEntry 4 }
pmMpoLanesLaneId OBJECT-TYPE
SYNTAX Unsigned32 (1..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The id of the lane within.
"
::= { pmMpoLanesEntry 5 }
pmMpoLanesAdminStatus OBJECT-TYPE
SYNTAX BoardOrInterfaceAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative state for the PM object.
down - Alarms are not sent.
up - Alarms are sent
service - Alarms are not sent
"
DEFVAL { up }
::= { pmMpoLanesEntry 6 }
pmMpoLanesOperStatus OBJECT-TYPE
SYNTAX BoardOrInterfaceOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state for the PM object.
notPresent - The physical resource is not available.
down - The object is disabled.
up - The object is enabled.
"
DEFVAL { notPresent }
::= { pmMpoLanesEntry 7 }
pmMpoLanesPmReportMode OBJECT-TYPE
SYNTAX OnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode PM reporting on the interface.
off - PM reporting is inactive.
on - PM reporting is activated.
"
DEFVAL { on }
::= { pmMpoLanesEntry 8 }
pmMpoLanesIsSuspect15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
"
::= { pmMpoLanesEntry 9 }
pmMpoLanesIsSuspect24H OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
"
::= { pmMpoLanesEntry 10 }
pmMpoLanesRxCurrentES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in the current 15 minute interval.
"
::= { pmMpoLanesEntry 11 }
pmMpoLanesRxCurrentSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in the current 15 minute
interval.
"
::= { pmMpoLanesEntry 12 }
pmMpoLanesRxCurrentBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in the current 15 minute
interval.
"
::= { pmMpoLanesEntry 13 }
pmMpoLanesRxCurrentUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds in the current 15 minute
interval.
"
::= { pmMpoLanesEntry 14 }
pmMpoLanesTxCurrentES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in the current 15 minute interval.
"
::= { pmMpoLanesEntry 15 }
pmMpoLanesTxCurrentSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in the current 15 minute
interval.
"
::= { pmMpoLanesEntry 16 }
pmMpoLanesTxCurrentBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in in the current
15 minute interval.
"
::= { pmMpoLanesEntry 17 }
pmMpoLanesTxCurrentUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds encountered in the current
15 minute interval.
"
::= { pmMpoLanesEntry 18 }
pmMpoLanesRx24hCurrentES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in the current 24 hour interval.
"
::= { pmMpoLanesEntry 19 }
pmMpoLanesRx24hCurrentSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in the current 24 hour
interval.
"
::= { pmMpoLanesEntry 20 }
pmMpoLanesRx24hCurrentBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in the current 24 hour
interval.
"
::= { pmMpoLanesEntry 21 }
pmMpoLanesRx24hCurrentUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds encountered in the current
24 hour interval.
"
::= { pmMpoLanesEntry 22 }
pmMpoLanesTx24hCurrentES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Errored Seconds in the current 24 hour interval.
"
::= { pmMpoLanesEntry 23 }
pmMpoLanesTx24hCurrentSES OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds in the current 24 hour
interval.
"
::= { pmMpoLanesEntry 24 }
pmMpoLanesTx24hCurrentBBE OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Background Block Errors in the current 24 hour
interval.
"
::= { pmMpoLanesEntry 25 }
pmMpoLanesTx24hCurrentUAS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds encountered in the current
24 hour interval.
"
::= { pmMpoLanesEntry 26 }
pmMpoLanesRxESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
errored seconds alarm.
"
DEFVAL { 20 }
::= { pmMpoLanesEntry 27 }
pmMpoLanesRxSESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
severely errored seconds alarm.
"
DEFVAL { 10 }
::= { pmMpoLanesEntry 28 }
pmMpoLanesRxBBEThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
background block errors alarms.
"
DEFVAL { 100000 }
::= { pmMpoLanesEntry 29 }
pmMpoLanesRxUASThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
unavailable seconds alarm.
"
DEFVAL { 30 }
::= { pmMpoLanesEntry 30 }
pmMpoLanesTxESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
errored seconds alarm.
"
DEFVAL { 20 }
::= { pmMpoLanesEntry 31 }
pmMpoLanesTxSESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
severely errored seconds alarm.
"
DEFVAL { 10 }
::= { pmMpoLanesEntry 32 }
pmMpoLanesTxBBEThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
background block errors alarms.
"
DEFVAL { 100000 }
::= { pmMpoLanesEntry 33 }
pmMpoLanesTxUASThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
unavailable seconds alarm.
"
DEFVAL { 30 }
::= { pmMpoLanesEntry 34 }
pmMpoLanesRx24hESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
errored seconds alarm.
"
DEFVAL { 200 }
::= { pmMpoLanesEntry 35 }
pmMpoLanesRx24hSESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
severely errored seconds alarm.
"
DEFVAL { 100 }
::= { pmMpoLanesEntry 36 }
pmMpoLanesRx24hBBEThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
background block errors alarms.
"
DEFVAL { 1000000 }
::= { pmMpoLanesEntry 37 }
pmMpoLanesRx24hUASThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
unavailable seconds alarm.
"
DEFVAL { 300 }
::= { pmMpoLanesEntry 38 }
pmMpoLanesTx24hESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
errored seconds alarm.
"
DEFVAL { 200 }
::= { pmMpoLanesEntry 39 }
pmMpoLanesTx24hSESThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
severely errored seconds alarm.
"
DEFVAL { 100 }
::= { pmMpoLanesEntry 40 }
pmMpoLanesTx24hBBEThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
background block errors alarms.
"
DEFVAL { 1000000 }
::= { pmMpoLanesEntry 41 }
pmMpoLanesTx24hUASThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold in seconds for the
unavailable seconds alarm.
"
DEFVAL { 300 }
::= { pmMpoLanesEntry 42 }
pmMpoLanesRxES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errored seconds (ES) Rx 15 min threshold
exceeded.
A: The number of errored seconds during a period
exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated ES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 30 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 43 }
pmMpoLanesRxSES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely errored seconds (SES) Rx 15 min
threshold exceeded.
A: The number of severely errored seconds during
a period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated SES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 20 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 44 }
pmMpoLanesRxBBE OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background block errors (BBE) Rx 15 min
threshold exceeded.
A: The number of background block errors
during a period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated BBE counter is reset to zero, by
definition. At the same time the fault status
is cleared.
"
::= { pmMpoLanesEntry 45 }
pmMpoLanesRxUAS OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (UAS) Rx 15 min threshold
exceeded.
A: The number of unavailable seconds during a
period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated UAS counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 45 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 46 }
pmMpoLanesTxES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errored seconds (ES) Tx 15 min threshold
exceeded.
A: The number of errored seconds during a period
exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated ES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 30 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 47 }
pmMpoLanesTxSES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely errored seconds (SES) Tx 15 min
threshold exceeded.
A: The number of severely errored seconds during
a period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated SES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 20 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 48 }
pmMpoLanesTxBBE OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background block errors (BBE) Tx 15 min
threshold exceeded.
A: The number of background block errors
during a period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated BBE counter is reset to zero, by
definition. At the same time the fault status
is cleared.
"
::= { pmMpoLanesEntry 49 }
pmMpoLanesTxUAS OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (UAS) Tx 15 min threshold
exceeded.
A: The number of unavailable seconds during a period
exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated UAS counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 45 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 50 }
pmMpoLanesRx24hES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errored seconds (ES) Rx 24 hour threshold
exceeded.
A: The number of errored seconds during a period
exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated ES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 300 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 51 }
pmMpoLanesRx24hSES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely errored seconds (SES) Rx 24 hour
threshold exceeded.
A: The number of severely errored seconds during
a period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated SES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 150 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 52 }
pmMpoLanesRx24hBBE OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background block errors (BBE) Rx 24 hour
threshold exceeded.
A: The number of background block errors
during a period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated BBE counter is reset to zero, by
definition. At the same time the fault status
is cleared.
"
::= { pmMpoLanesEntry 53 }
pmMpoLanesRx24hUAS OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (UAS) Rx 24 hour threshold
exceeded.
A: The number of unavailable seconds during a period
exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated UAS counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 400 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 54 }
pmMpoLanesTx24hES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Errored seconds Tx (ES) 24 hour threshold
exceeded.
A: The number of errored seconds during a period
exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated ES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 300 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 55 }
pmMpoLanesTx24hSES OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severely errored seconds (SES) Tx 24 hour
threshold exceeded.
A: The number of severely errored seconds during
a period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated SES counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 150 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 56 }
pmMpoLanesTx24hBBE OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Background block errors (BBE) Tx 24 hour
threshold exceeded.
A: The number of background block errors
during a period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated BBE counter is reset to zero, by
definition. At the same time the fault status
is cleared.
"
::= { pmMpoLanesEntry 57 }
pmMpoLanesTx24hUAS OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unavailable seconds (UAS) Tx 24 hour threshold
exceeded.
A: The number of unavailable seconds during a
period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated UAS counter is reset to zero, by
definition. At the same time the fault status
is cleared. The corresponding active alarm in
the alarm list, if any, is not cleared for
another 400 seconds to avoid unneccesary toggling
in the alarm list and log.
"
::= { pmMpoLanesEntry 58 }
pmMpoLanesReset15Min OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 15 minute PM counters for the
interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset15m reset
"
DEFVAL { normal }
::= { pmMpoLanesEntry 59 }
pmMpoLanesReset24H OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 24 hour PM counters for the interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset24h reset
"
DEFVAL { normal }
::= { pmMpoLanesEntry 60 }
pmMpoLanesRxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received power level in units of 0.1 dBm
"
::= { pmMpoLanesEntry 61 }
pmMpoLanesTxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmitted power level in units of 0.1 dBm
"
::= { pmMpoLanesEntry 62 }
pmMpoLanesObjectProperty OBJECT-TYPE
SYNTAX ObjectProperty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Property mask.
"
::= { pmMpoLanesEntry 63 }
pmMpoLanesIfNo OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface number of the port.
"
::= { pmMpoLanesEntry 64 }
pmMpoLanesUpPortId OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Internal port reference for traffic unit.
"
DEFVAL { -1 }
::= { pmMpoLanesEntry 65 }
-- ----------------------------------------------------
-- Notifications
-- ----------------------------------------------------
pmNotifyPrefix OBJECT IDENTIFIER ::= { lumentisPmNotifications 0 }
pmFileAdded NOTIFICATION-TYPE
OBJECTS {
pmFileIndex,
pmFileName,
pmFileCreatedTime,
pmFileSeqNumber }
STATUS current
DESCRIPTION
"Sent when a new 15 minute interval log file is
available.
"
::= { pmNotifyPrefix 1 }
pmFile24hAdded NOTIFICATION-TYPE
OBJECTS {
pmFile24hIndex,
pmFile24hName,
pmFile24hCreatedTime,
pmFile24hSeqNumber }
STATUS current
DESCRIPTION
"Sent when a new 24 hour interval log file is
available.
"
::= { pmNotifyPrefix 2 }
-- ----------------------------------------------------
-- Control parameters group
-- ----------------------------------------------------
pmControlReset15Min OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset all 15 minute counters in the node.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset15m reset
"
DEFVAL { normal }
::= { pmControl 1 }
pmControlReset24H OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset all 24 hour counters in the node.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset24h reset
"
DEFVAL { normal }
::= { pmControl 2 }
pmControlResetCont OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset all continuous (free running) counters in the node.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set resetCont reset
"
DEFVAL { normal }
::= { pmControl 3 }
-- ----------------------------------------------------
-- Ethernet Traffic Data
-- ----------------------------------------------------
pmEthTdTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmEthTdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pm interface table."
::= { pmEthTdList 1 }
pmEthTdEntry OBJECT-TYPE
SYNTAX PmEthTdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in interface table.
"
INDEX { pmEthTdIndex }
::= { pmEthTdTable 1 }
PmEthTdEntry ::=
SEQUENCE {
pmEthTdIndex Unsigned32,
pmEthTdName MgmtNameString,
pmEthTdSubrack SubrackNumber,
pmEthTdSlot SlotNumber,
pmEthTdPort PortNumber,
pmEthTdPmReportMode INTEGER,
pmEthTdRxPort PortNumber,
pmEthTdReset15Min INTEGER,
pmEthTdReset24H INTEGER,
pmEthTdAdminStatus INTEGER,
pmEthTdOperStatus INTEGER,
pmEthTdIsSuspect15Min TruthValue,
pmEthTdIsSuspect24h TruthValue,
-- Ethernet traffic data 15m
pmEthTdCurrentRxUndersizedFrames Counter64,
pmEthTdCurrentRxOversizedFrames Counter64,
pmEthTdCurrentRxFragments Counter64,
pmEthTdCurrentRxFcsErrors Counter64,
pmEthTdCurrentRxInvalidCeVlanId Counter64,
pmEthTdCurrentTxOctets Counter64,
pmEthTdCurrentTxFrames Counter64,
pmEthTdCurrentTxUnicastFrames Counter64,
pmEthTdCurrentTxMulticastFrames Counter64,
pmEthTdCurrentTxBroadcastFrames Counter64,
pmEthTdCurrentRxOctets Counter64,
pmEthTdCurrentRxFrames Counter64,
pmEthTdCurrentRxUnicastFrames Counter64,
pmEthTdCurrentRxMulticastFrames Counter64,
pmEthTdCurrentRxBroadcastFrames Counter64,
pmEthTdCurrentTxEthMaxUtilization Gauge32,
pmEthTdCurrentRxEthMaxUtilization Gauge32,
-- Ethernet traffic data 24h
pmEthTdCurrent24hRxUndersizedFrames Counter64,
pmEthTdCurrent24hRxOversizedFrames Counter64,
pmEthTdCurrent24hRxFragments Counter64,
pmEthTdCurrent24hRxFcsErrors Counter64,
pmEthTdCurrent24hRxInvalidCeVlanId Counter64,
pmEthTdCurrent24hTxOctets Counter64,
pmEthTdCurrent24hTxFrames Counter64,
pmEthTdCurrent24hTxUnicastFrames Counter64,
pmEthTdCurrent24hTxMulticastFrames Counter64,
pmEthTdCurrent24hTxBroadcastFrames Counter64,
pmEthTdCurrent24hRxOctets Counter64,
pmEthTdCurrent24hRxFrames Counter64,
pmEthTdCurrent24hRxUnicastFrames Counter64,
pmEthTdCurrent24hRxMulticastFrames Counter64,
pmEthTdCurrent24hRxBroadcastFrames Counter64,
pmEthTdCurrent24hTxEthMaxUtilization Gauge32,
pmEthTdCurrent24hRxEthMaxUtilization Gauge32,
pmEthTdObjectProperty ObjectProperty,
-- Ethernet traffic threshold 15m
pmEthTdRxUndersizedFramesThreshold Counter64,
pmEthTdRxOversizedFramesThreshold Counter64,
pmEthTdRxFragmentsThreshold Counter64,
pmEthTdRxFcsErrorsThreshold Counter64,
pmEthTdRxInvalidCeVlanIdThreshold Counter64,
-- Ethernet traffic threshold 24h
pmEthTd24hRxUndersizedFramesThreshold Counter64,
pmEthTd24hRxOversizedFramesThreshold Counter64,
pmEthTd24hRxFragmentsThreshold Counter64,
pmEthTd24hRxFcsErrorsThreshold Counter64,
pmEthTd24hRxInvalidCeVlanIdThreshold Counter64,
-- Ethernet traffic faultstatus 15m
pmEthTdRxUndersizedFrames FaultStatus,
pmEthTdRxOversizedFrames FaultStatus,
pmEthTdRxFragments FaultStatus,
pmEthTdRxFcsErrors FaultStatus,
pmEthTdRxInvalidCeVlanId FaultStatus,
-- Ethernet traffic faultstatus 24h
pmEthTd24hRxUndersizedFrames FaultStatus,
pmEthTd24hRxOversizedFrames FaultStatus,
pmEthTd24hRxFragments FaultStatus,
pmEthTd24hRxFcsErrors FaultStatus,
pmEthTd24hRxInvalidCeVlanId FaultStatus,
-- Ethernet traffic data free running
pmEthTdResetCont INTEGER,
pmEthTdCurrentContRxUndersizedFrames Counter64,
pmEthTdCurrentContRxOversizedFrames Counter64,
pmEthTdCurrentContRxFragments Counter64,
pmEthTdCurrentContRxFcsErrors Counter64,
pmEthTdCurrentContRxInvalidCeVlanId Counter64,
pmEthTdCurrentContTxOctets Counter64,
pmEthTdCurrentContTxFrames Counter64,
pmEthTdCurrentContTxUnicastFrames Counter64,
pmEthTdCurrentContTxMulticastFrames Counter64,
pmEthTdCurrentContTxBroadcastFrames Counter64,
pmEthTdCurrentContRxOctets Counter64,
pmEthTdCurrentContRxFrames Counter64,
pmEthTdCurrentContRxUnicastFrames Counter64,
pmEthTdCurrentContRxMulticastFrames Counter64,
pmEthTdCurrentContRxBroadcastFrames Counter64,
pmEthTdVlanId Integer32,
pmEthTdIfNo PortNumber,
pmEthTdUpPortId Integer32
}
pmEthTdIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index assigned to each if entry.
The index is read-only and persistent, i.e the index
is kept over reboot and backed up by stable storage.
"
::= { pmEthTdEntry 1 }
pmEthTdName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the interface, for
example 'mrt:1:2:1-2'.
"
::= { pmEthTdEntry 2 }
pmEthTdSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the subrack where the interface
is located.
"
::= { pmEthTdEntry 3 }
pmEthTdSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the slot where the interface is
located.
"
::= { pmEthTdEntry 4 }
pmEthTdPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the Tx port for the interface.
"
::= { pmEthTdEntry 5 }
pmEthTdPmReportMode OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode PM reporting on the interface.
off - PM reporting is inactive.
on - PM reporting is activated.
"
DEFVAL { on }
::= { pmEthTdEntry 6 }
pmEthTdRxPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of the Rx port for the interface.
"
::= { pmEthTdEntry 7 }
pmEthTdReset15Min OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 15 minute PM counters for the
interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset15m reset
"
DEFVAL { normal }
::= { pmEthTdEntry 8 }
pmEthTdReset24H OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 24 hour PM counters for the interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset24h reset
"
DEFVAL { normal }
::= { pmEthTdEntry 9 }
pmEthTdAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down (1),
service (2),
up (3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative state for the PM object.
down - Alarms are not sent.
up - Alarms are sent
service - Alarms are not sent
"
DEFVAL { up }
::= { pmEthTdEntry 10 }
pmEthTdOperStatus OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
down (2),
up (3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state for the PM object.
notPresent - The physical resource is not available.
down - The object is disabled.
up - The object is enabled.
"
DEFVAL { notPresent }
::= { pmEthTdEntry 11 }
pmEthTdIsSuspect15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
"
::= { pmEthTdEntry 12 }
pmEthTdIsSuspect24h OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
"
::= { pmEthTdEntry 13 }
pmEthTdCurrentRxUndersizedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of undersized frames
during a particular 15 minute interval.
"
::= {pmEthTdEntry 14 }
pmEthTdCurrentRxOversizedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of oversized frames
during a particular 15 minute interval.
"
::= {pmEthTdEntry 15 }
pmEthTdCurrentRxFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of fragments
during a particular 15 minute interval.
"
::= {pmEthTdEntry 16 }
pmEthTdCurrentRxFcsErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames with FCS or alignment errors
during a particular 15 minute interval.
"
::= {pmEthTdEntry 17 }
pmEthTdCurrentRxInvalidCeVlanId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames with invalid CE-VLAN id
during a particular 15 minute interval.
"
::= {pmEthTdEntry 18 }
pmEthTdCurrentTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of octets transmitted OK
during a particular 15 minute interval.
"
::= {pmEthTdEntry 19 }
pmEthTdCurrentTxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames transmitted OK
during a particular 15 minute interval.
"
::= {pmEthTdEntry 20 }
pmEthTdCurrentTxUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of unicast frames transmitted OK
during a particular 15 minute interval.
"
::= {pmEthTdEntry 21 }
pmEthTdCurrentTxMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames transmitted OK
during a particular 15 minute interval.
"
::= {pmEthTdEntry 22 }
pmEthTdCurrentTxBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of broadcast frames transmitted OK
during a particular 15 minute interval.
"
::= {pmEthTdEntry 23 }
pmEthTdCurrentRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of octets received OK
during a particular 15 minute interval.
"
::= {pmEthTdEntry 24 }
pmEthTdCurrentRxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames received OK
during a particular 15 minute interval.
"
::= {pmEthTdEntry 25 }
pmEthTdCurrentRxUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of unicast frames received OK
during a particular 15 minute interval.
"
::= {pmEthTdEntry 26 }
pmEthTdCurrentRxMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames received OK
during a particular 15 minute interval.
"
::= {pmEthTdEntry 27 }
pmEthTdCurrentRxBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of broadcast frames received OK
during a particular 15 minute interval.
"
::= {pmEthTdEntry 28 }
pmEthTdCurrent24hRxUndersizedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of undersized frames
during a particular 24 hour interval.
"
::= {pmEthTdEntry 29 }
pmEthTdCurrent24hRxOversizedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of oversized frames
during a particular 24 hour interval.
"
::= {pmEthTdEntry 30 }
pmEthTdCurrent24hRxFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of fragments
during a particular 24 hour interval.
"
::= {pmEthTdEntry 31 }
pmEthTdCurrent24hRxFcsErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames with FCS or alignment errors
during a particular 24 hour interval.
"
::= {pmEthTdEntry 32 }
pmEthTdCurrent24hRxInvalidCeVlanId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames with invalid CE-VLAN id
during a particular 24 hour interval.
"
::= {pmEthTdEntry 33 }
pmEthTdCurrent24hTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of octets transmitted OK
during a particular 24 hour interval.
"
::= {pmEthTdEntry 34 }
pmEthTdCurrent24hTxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames transmitted OK
during a particular 24 hour interval.
"
::= {pmEthTdEntry 35 }
pmEthTdCurrent24hTxUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of unicast frames transmitted OK
during a particular 24 hour interval.
"
::= {pmEthTdEntry 36 }
pmEthTdCurrent24hTxMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames transmitted OK
during a particular 24 hour interval.
"
::= {pmEthTdEntry 37 }
pmEthTdCurrent24hTxBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of broadcast frames transmitted OK
during a particular 24 hour interval.
"
::= {pmEthTdEntry 38 }
pmEthTdCurrent24hRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of octets received OK
during a particular 24 hour interval.
"
::= {pmEthTdEntry 39 }
pmEthTdCurrent24hRxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames received OK
during a particular 24 hour interval.
"
::= {pmEthTdEntry 40 }
pmEthTdCurrent24hRxUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of unicast frames received OK
during a particular 24 hour interval.
"
::= {pmEthTdEntry 41 }
pmEthTdCurrent24hRxMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames received OK
during a particular 24 hour interval.
"
::= {pmEthTdEntry 42 }
pmEthTdCurrent24hRxBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of broadcast frames received OK
during a particular 24 hour interval.
"
::= {pmEthTdEntry 43 }
pmEthTdObjectProperty OBJECT-TYPE
SYNTAX ObjectProperty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Property mask.
"
::= { pmEthTdEntry 44 }
pmEthTdRxUndersizedFramesThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the alarm,
(in no. of frames).
Default value 10
"
DEFVAL { 10 }
::= { pmEthTdEntry 45 }
pmEthTdRxOversizedFramesThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the alarm,
(in no. of frames).
Default value 10
"
DEFVAL { 10 }
::= { pmEthTdEntry 46 }
pmEthTdRxFragmentsThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the alarm,
(in no. of frames).
Default value 10
"
DEFVAL { 10 }
::= { pmEthTdEntry 47 }
pmEthTdRxFcsErrorsThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the alarm,
(in no. of frames).
Default value 10
"
DEFVAL { 10 }
::= { pmEthTdEntry 48 }
pmEthTdRxInvalidCeVlanIdThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the alarm,
(in no. of frames).
Default value 10
A value of 0 (zero) will disable the alarm.
"
DEFVAL { 10 }
::= { pmEthTdEntry 49 }
pmEthTd24hRxUndersizedFramesThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the alarm,
(in no. of frames).
Default value 10
"
DEFVAL { 10 }
::= { pmEthTdEntry 50 }
pmEthTd24hRxOversizedFramesThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the alarm,
(in no. of frames).
Default value 10
"
DEFVAL { 10 }
::= { pmEthTdEntry 51 }
pmEthTd24hRxFragmentsThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the alarm,
(in no. of frames).
Default value 10
"
DEFVAL { 10 }
::= { pmEthTdEntry 52 }
pmEthTd24hRxFcsErrorsThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the alarm,
(in no. of frames).
Default value 10
"
DEFVAL { 10 }
::= { pmEthTdEntry 53 }
pmEthTd24hRxInvalidCeVlanIdThreshold OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the alarm,
(in no. of frames).
Default value 10
A value of 0 (zero) will disable the alarm.
"
DEFVAL { 10 }
::= { pmEthTdEntry 54 }
pmEthTdRxUndersizedFrames OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx undersized frames threshold exceeded.
A: The number of undersized frames during a
period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated undersized frames counter is reset to
zero. At the same time the fault
status is cleared.
"
::= { pmEthTdEntry 55 }
pmEthTdRxOversizedFrames OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx oversized frames threshold exceeded.
A: The number of oversized frames during a
period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated oversized frames counter is reset to
zero. At the same time the fault
status is cleared.
"
::= { pmEthTdEntry 56 }
pmEthTdRxFragments OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx fragments threshold exceeded.
A: The number of fragmented frames during a
period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated fragmented frames counter is reset to
zero. At the same time the fault status is cleared.
"
::= { pmEthTdEntry 57 }
pmEthTdRxFcsErrors OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx FCS errors threshold exceeded.
A: The number of FCS or alignment errors during a
period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated FCS error counter is reset to
zero. At the same time the fault
status is cleared.
"
::= { pmEthTdEntry 58 }
pmEthTdRxInvalidCeVlanId OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx invalid CE VLAN id threshold exceeded.
A: The number of invalid CE VLAN id during a
period exceeds the associated threshold.
D: At the start of a new 15 minute period the
associated invalid CE VLAN id counter is reset to
zero. At the same time the fault
status is cleared.
"
::= { pmEthTdEntry 59 }
pmEthTd24hRxUndersizedFrames OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx undersized frames 24h threshold exceeded.
A: The number of undersized frames during a
period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated undersized frames counter is reset to
zero. At the same time the fault
status is cleared.
"
::= { pmEthTdEntry 60 }
pmEthTd24hRxOversizedFrames OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx oversized frames 24h threshold exceeded.
A: The number of oversized frames during a
period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated oversized frames counter is reset
to zero. At the same time the fault
status is cleared.
"
::= { pmEthTdEntry 61 }
pmEthTd24hRxFragments OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx fragments 24h threshold exceeded.
A: The number of fragmented frames during a
period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated fragmented frames counter is reset
to zero. At the same time the fault
status is cleared.
"
::= { pmEthTdEntry 62 }
pmEthTd24hRxFcsErrors OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx FCS errors 24h threshold exceeded.
A: The number of FCS or alignment errors during a
period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated FCS error counter is reset to
zero. At the same time the fault
status is cleared.
"
::= { pmEthTdEntry 63 }
pmEthTd24hRxInvalidCeVlanId OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rx invalid CE VLAN id 24h threshold exceeded.
A: The number of invalid CE VLAN id during a
period exceeds the associated threshold.
D: At the start of a new 24 hour period the
associated invalid CE VLAN id counter is reset
to zero. At the same time the fault
status is cleared.
"
::= { pmEthTdEntry 64 }
pmEthTdCurrentTxEthMaxUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 15 min
interval.
"
::= { pmEthTdEntry 65 }
pmEthTdCurrentRxEthMaxUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 15 min
interval.
"
::= { pmEthTdEntry 66 }
pmEthTdCurrent24hTxEthMaxUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 24 h
interval.
"
::= { pmEthTdEntry 67 }
pmEthTdCurrent24hRxEthMaxUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 24 h
interval.
"
::= { pmEthTdEntry 68 }
pmEthTdResetCont OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the free running PM counters for the
interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set resetCont reset
"
DEFVAL { normal }
::= { pmEthTdEntry 69 }
pmEthTdCurrentContRxUndersizedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of undersized frames. Free running counter.
"
::= {pmEthTdEntry 70 }
pmEthTdCurrentContRxOversizedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of oversized frames. Free running counter.
"
::= {pmEthTdEntry 71 }
pmEthTdCurrentContRxFragments OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of fragments. Free running counter.
"
::= {pmEthTdEntry 72 }
pmEthTdCurrentContRxFcsErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames with FCS or alignment errors.
Free running counter.
"
::= {pmEthTdEntry 73 }
pmEthTdCurrentContRxInvalidCeVlanId OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames with invalid CE-VLAN id.
Free running counter.
"
::= {pmEthTdEntry 74 }
pmEthTdCurrentContTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of octets transmitted OK. Free running
counter.
"
::= {pmEthTdEntry 75 }
pmEthTdCurrentContTxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames transmitted OK. Free running counter.
"
::= {pmEthTdEntry 76 }
pmEthTdCurrentContTxUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of unicast frames transmitted OK. Free running
counter.
"
::= {pmEthTdEntry 77 }
pmEthTdCurrentContTxMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames transmitted OK. Free running
counter.
"
::= {pmEthTdEntry 78 }
pmEthTdCurrentContTxBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of broadcast frames transmitted OK. Free running
counter.
"
::= {pmEthTdEntry 79 }
pmEthTdCurrentContRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of octets received OK. Free running counter.
"
::= {pmEthTdEntry 80 }
pmEthTdCurrentContRxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of frames received OK. Free running counter.
"
::= {pmEthTdEntry 81 }
pmEthTdCurrentContRxUnicastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of unicast frames received OK. Free running counter.
"
::= {pmEthTdEntry 82 }
pmEthTdCurrentContRxMulticastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of multicast frames received OK. Free running
counter.
"
::= {pmEthTdEntry 83 }
pmEthTdCurrentContRxBroadcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of broadcast frames received OK. Free running
counter.
"
::= {pmEthTdEntry 84 }
pmEthTdVlanId OBJECT-TYPE
SYNTAX Integer32(-1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User specified VLAN ID, which is last number in the
port device ID.
If no VLAN ID is specified then VLAN ID -1 is assumed.
"
DEFVAL { -1 }
::= {pmEthTdEntry 85 }
pmEthTdIfNo OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface number of the port.
"
::= { pmEthTdEntry 86 }
pmEthTdUpPortId OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Internal port reference for traffic unit.
"
DEFVAL { -1 }
::= { pmEthTdEntry 87 }
-- ----------------------------------------------------
-- Ethernet Traffic Management PM
-- ----------------------------------------------------
pmEthTmTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmEthTmEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The pm interface table."
::= { pmEthTmList 1 }
pmEthTmEntry OBJECT-TYPE
SYNTAX PmEthTmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in interface table.
"
INDEX { pmEthTmIndex }
::= { pmEthTmTable 1 }
PmEthTmEntry ::=
SEQUENCE {
pmEthTmIndex Unsigned32,
pmEthTmName MgmtNameString,
pmEthTmSubrack SubrackNumber,
pmEthTmSlot SlotNumber,
pmEthTmPort PortNumber,
pmEthTmPmReportMode INTEGER,
pmEthTmRxPort PortNumber,
pmEthTmReset15Min INTEGER,
pmEthTmReset24H INTEGER,
pmEthTmAdminStatus INTEGER,
pmEthTmOperStatus INTEGER,
pmEthTmIsSuspect15Min TruthValue,
pmEthTmIsSuspect24h TruthValue,
-- Ethernet traffic mgmt 15m
pmEthTmCurrentIngressGreenFrameCount Counter64,
pmEthTmCurrentIngressYellowFrameCount Counter64,
pmEthTmCurrentIngressRedFrameCount Counter64,
pmEthTmCurrentIngressGreenOctetCount Counter64,
pmEthTmCurrentIngressYellowOctetCount Counter64,
pmEthTmCurrentIngressRedOctetCount Counter64,
pmEthTmCurrentEgressGreenFrameCount Counter64,
pmEthTmCurrentEgressGreenOctetCount Counter64,
pmEthTmCurrentGreenFrameDiscards Counter64,
pmEthTmCurrentYellowFrameDiscards Counter64,
pmEthTmCurrentGreenOctetDiscards Counter64,
pmEthTmCurrentYellowOctetDiscards Counter64,
-- Ethernet traffic mgmt 24h
pmEthTmCurrent24hIngressGreenFrameCount Counter64,
pmEthTmCurrent24hIngressYellowFrameCount Counter64,
pmEthTmCurrent24hIngressRedFrameCount Counter64,
pmEthTmCurrent24hIngressGreenOctetCount Counter64,
pmEthTmCurrent24hIngressYellowOctetCount Counter64,
pmEthTmCurrent24hIngressRedOctetCount Counter64,
pmEthTmCurrent24hEgressGreenFrameCount Counter64,
pmEthTmCurrent24hEgressGreenOctetCount Counter64,
pmEthTmCurrent24hGreenFrameDiscards Counter64,
pmEthTmCurrent24hYellowFrameDiscards Counter64,
pmEthTmCurrent24hGreenOctetDiscards Counter64,
pmEthTmCurrent24hYellowOctetDiscards Counter64,
pmEthTmObjectProperty ObjectProperty,
pmEthTmInternalReference Unsigned32,
pmEthTmIdentifier DisplayString }
pmEthTmIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index assigned to each if entry.
"
::= { pmEthTmEntry 1 }
pmEthTmName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the interface, for
example 'mrt:1:2:1-2'.
"
::= { pmEthTmEntry 2 }
pmEthTmSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the subrack where the interface
is located.
"
::= { pmEthTmEntry 3 }
pmEthTmSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the slot where the interface is
located.
"
::= { pmEthTmEntry 4 }
pmEthTmPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the TX port for the interface.
"
::= { pmEthTmEntry 5 }
pmEthTmPmReportMode OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode PM reporting on the interface.
off - PM reporting is inactive.
on - PM reporting is activated.
"
DEFVAL { on }
::= { pmEthTmEntry 6 }
pmEthTmRxPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the RX port for the interface.
"
::= { pmEthTmEntry 7 }
pmEthTmReset15Min OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 15 minute PM counters for the
interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset15m reset
"
DEFVAL { normal }
::= { pmEthTmEntry 8 }
pmEthTmReset24H OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 24 hour PM counters for the interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset24h reset
"
DEFVAL { normal }
::= { pmEthTmEntry 9 }
pmEthTmAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down (1),
service (2),
up (3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative state for the PM object.
down - Alarms are not sent.
up - Alarms are sent
service - Alarms are not sent
"
DEFVAL { up }
::= { pmEthTmEntry 10 }
pmEthTmOperStatus OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
down (2),
up (3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state for the PM object.
notPresent - The physical resource is not available.
down - The object is disabled.
up - The object is enabled.
"
DEFVAL { notPresent }
::= { pmEthTmEntry 11 }
pmEthTmIsSuspect15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
"
::= { pmEthTmEntry 12 }
pmEthTmIsSuspect24h OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
"
::= { pmEthTmEntry 13 }
pmEthTmCurrentIngressGreenFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames sent by the ingress UNI
during a particular 15 minute interval.
"
::= {pmEthTmEntry 14 }
pmEthTmCurrentIngressYellowFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow frames sent by the ingress UNI
during a particular 15 minute interval.
"
::= {pmEthTmEntry 15 }
pmEthTmCurrentIngressRedFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of red frames sent by the ingress UNI
during a particular 15 minute interval.
"
::= {pmEthTmEntry 16 }
pmEthTmCurrentIngressGreenOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets sent by the ingress UNI
during a particular 15 minute interval.
"
::= {pmEthTmEntry 17 }
pmEthTmCurrentIngressYellowOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow octets sent by the ingress UNI
during a particular 15 minute interval.
"
::= {pmEthTmEntry 18 }
pmEthTmCurrentIngressRedOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of red octets sent by the ingress UNI
during a particular 15 minute interval.
"
::= {pmEthTmEntry 19 }
pmEthTmCurrentEgressGreenFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames received by the egress UNI
during a particular 15 minute interval.
"
::= {pmEthTmEntry 20 }
pmEthTmCurrentEgressGreenOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets received by the egress UNI
during a particular 15 minute interval.
"
::= {pmEthTmEntry 21 }
pmEthTmCurrentGreenFrameDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames discarded due to congestion
during a particular 15 minute interval.
"
::= {pmEthTmEntry 22 }
pmEthTmCurrentYellowFrameDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow frames discarded due to congestion
during a particular 15 minute interval.
"
::= {pmEthTmEntry 23 }
pmEthTmCurrentGreenOctetDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets discarded due to congestion
during a particular 15 minute interval.
"
::= {pmEthTmEntry 24 }
pmEthTmCurrentYellowOctetDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow octets discarded due to congestion
during a particular 15 minute interval.
"
::= {pmEthTmEntry 25 }
pmEthTmCurrent24hIngressGreenFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames sent by the ingress UNI
during a particular 24 hour interval.
"
::= {pmEthTmEntry 26 }
pmEthTmCurrent24hIngressYellowFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow frames sent by the ingress UNI
during a particular 24 hour interval.
"
::= {pmEthTmEntry 27 }
pmEthTmCurrent24hIngressRedFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of red frames sent by the ingress UNI
during a particular 24 hour interval.
"
::= {pmEthTmEntry 28 }
pmEthTmCurrent24hIngressGreenOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets sent by the ingress UNI
during a particular 24 hour interval.
"
::= {pmEthTmEntry 29 }
pmEthTmCurrent24hIngressYellowOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow octets sent by the ingress UNI
during a particular 24 hour interval.
"
::= {pmEthTmEntry 30 }
pmEthTmCurrent24hIngressRedOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of red octets sent by the ingress UNI
during a particular 24 hour interval.
"
::= {pmEthTmEntry 31 }
pmEthTmCurrent24hEgressGreenFrameCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames received by the egress UNI
during a particular 24 hour interval.
"
::= {pmEthTmEntry 32 }
pmEthTmCurrent24hEgressGreenOctetCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets received by the egress UNI
during a particular 24 hour interval.
"
::= {pmEthTmEntry 33 }
pmEthTmCurrent24hGreenFrameDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green frames discarded due to congestion
during a particular 24 hour interval.
"
::= {pmEthTmEntry 34 }
pmEthTmCurrent24hYellowFrameDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow frames discarded due to congestion
during a particular 24 hour interval.
"
::= {pmEthTmEntry 35 }
pmEthTmCurrent24hGreenOctetDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of green octets discarded due to congestion
during a particular 24 hour interval.
"
::= {pmEthTmEntry 36 }
pmEthTmCurrent24hYellowOctetDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of yellow octets discarded due to congestion
during a particular 24 hour interval.
"
::= {pmEthTmEntry 37 }
pmEthTmObjectProperty OBJECT-TYPE
SYNTAX ObjectProperty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Property mask.
"
::= { pmEthTmEntry 38 }
pmEthTmInternalReference OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For internal use only.
"
DEFVAL { 0 }
::= { pmEthTmEntry 39 }
pmEthTmIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Unique identifier for the EVC.
"
DEFVAL { "" }
::= { pmEthTmEntry 40 }
-- ----------------------------------------------------
-- Ethernet OAM PM
-- ----------------------------------------------------
pmEthOamTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmEthOamEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The pm interface table."
::= { pmEthOamList 1 }
pmEthOamEntry OBJECT-TYPE
SYNTAX PmEthOamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in interface table.
"
INDEX { pmEthOamIndex }
::= { pmEthOamTable 1 }
PmEthOamEntry ::=
SEQUENCE {
pmEthOamIndex Unsigned32,
pmEthOamName MgmtNameString,
pmEthOamSubrack SubrackNumber,
pmEthOamSlot SlotNumber,
pmEthOamPort PortNumber,
pmEthOamPmReportMode INTEGER,
pmEthOamRxPort PortNumber,
pmEthOamReset15Min INTEGER,
pmEthOamReset24H INTEGER,
pmEthOamAdminStatus INTEGER,
pmEthOamOperStatus INTEGER,
pmEthOamIsSuspect15Min TruthValue,
pmEthOamIsSuspect24h TruthValue,
-- Ethernet OAM 15m
pmEthOamCurrentTwoWayFrameDelay Gauge32,
pmEthOamCurrentTwoWayFrameDelayVariation Gauge32,
pmEthOamCurrentFrameLossRatioNearEnd Gauge32,
pmEthOamCurrentFrameLossRatioFarEnd Gauge32,
pmEthOamCurrentUnavailabilityNearEnd Gauge32,
pmEthOamCurrentUnavailabilityFarEnd Gauge32,
-- Ethernet OAM 24h
pmEthOamCurrent24hTwoWayFrameDelay Gauge32,
pmEthOamCurrent24hTwoWayFrameDelayVariation Gauge32,
pmEthOamCurrent24hFrameLossRatioNearEnd Gauge32,
pmEthOamCurrent24hFrameLossRatioFarEnd Gauge32,
pmEthOamCurrent24hUnavailabilityNearEnd Gauge32,
pmEthOamCurrent24hUnavailabilityFarEnd Gauge32,
pmEthOamObjectProperty ObjectProperty,
pmEthOamInternalReference Unsigned32,
pmEthOamIdentifier DisplayString,
pmEthOamUsedPercentOfFrames Unsigned32,
pmEthOamFrameLossRatioUnavailableThreshold Unsigned32,
-- Ethernet OAM 15m
pmEthOamCurrentOneWayFrameDelayVariation Gauge32,
-- Ethernet OAM 24h
pmEthOamCurrent24hOneWayFrameDelayVariation Gauge32 }
pmEthOamIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index assigned to each if entry.
"
::= { pmEthOamEntry 1 }
pmEthOamName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the interface, for
example 'mrt:1:2:1-2'.
"
::= { pmEthOamEntry 2 }
pmEthOamSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the subrack where the interface
is located.
"
::= { pmEthOamEntry 3 }
pmEthOamSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the slot where the interface is
located.
"
::= { pmEthOamEntry 4 }
pmEthOamPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the TX port for the interface.
"
::= { pmEthOamEntry 5 }
pmEthOamPmReportMode OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode PM reporting on the interface.
off - PM reporting is inactive.
on - PM reporting is activated.
"
DEFVAL { on }
::= { pmEthOamEntry 6 }
pmEthOamRxPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the RX port for the interface.
"
::= { pmEthOamEntry 7 }
pmEthOamReset15Min OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 15 minute PM counters for the
interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset15m reset
"
DEFVAL { normal }
::= { pmEthOamEntry 8 }
pmEthOamReset24H OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 24 hour PM counters for the interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset24h reset
"
DEFVAL { normal }
::= { pmEthOamEntry 9 }
pmEthOamAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down (1),
service (2),
up (3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative state for the PM object.
down - Alarms are not sent.
up - Alarms are sent
service - Alarms are not sent
"
DEFVAL { up }
::= { pmEthOamEntry 10 }
pmEthOamOperStatus OBJECT-TYPE
SYNTAX INTEGER {
notPresent (1),
down (2),
up (3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state for the PM object.
notPresent - The physical resource is not available.
down - The object is disabled.
up - The object is enabled.
"
DEFVAL { notPresent }
::= { pmEthOamEntry 11 }
pmEthOamIsSuspect15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
"
::= { pmEthOamEntry 12 }
pmEthOamIsSuspect24h OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
"
::= { pmEthOamEntry 13 }
pmEthOamCurrentTwoWayFrameDelay OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time requeired to transmit a service frame from source to destination
during a particular 15 minute interval.
"
::= {pmEthOamEntry 14 }
pmEthOamCurrentTwoWayFrameDelayVariation OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The difference in delay between two service frames
during a particular 15 minute interval.
"
::= {pmEthOamEntry 15 }
pmEthOamCurrentFrameLossRatioNearEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of service frames not delivered divided by the total number of service frames at near end
during a particular 15 minute interval.
"
::= {pmEthOamEntry 16 }
pmEthOamCurrentFrameLossRatioFarEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of service frames not delivered divided by the total number of service frames at far end
during a particular 15 minute interval.
"
::= {pmEthOamEntry 17 }
pmEthOamCurrentUnavailabilityNearEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The @todo
during a particular 15 minute interval.
"
::= {pmEthOamEntry 18 }
pmEthOamCurrentUnavailabilityFarEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The @todo
during a particular 15 minute interval.
"
::= {pmEthOamEntry 19 }
pmEthOamCurrent24hTwoWayFrameDelay OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time required to transmit a servic frame source to destination
during a particular 24 hour interval.
"
::= {pmEthOamEntry 20 }
pmEthOamCurrent24hTwoWayFrameDelayVariation OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The difference in delay of two service frames
during a particular 24 hour interval.
"
::= {pmEthOamEntry 21 }
pmEthOamCurrent24hFrameLossRatioNearEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of service frames not delivered divided by the total number of service frames at near end
during a particular 24 hour interval.
"
::= {pmEthOamEntry 22 }
pmEthOamCurrent24hFrameLossRatioFarEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of service frames not delivered divided by the total number of service frames at far end
during a particular 24 hour interval.
"
::= {pmEthOamEntry 23 }
pmEthOamCurrent24hUnavailabilityNearEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The @todo
during a particular 24 hour interval.
"
::= {pmEthOamEntry 24 }
pmEthOamCurrent24hUnavailabilityFarEnd OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The @todo
during a particular 24 hour interval.
"
::= {pmEthOamEntry 25 }
pmEthOamObjectProperty OBJECT-TYPE
SYNTAX ObjectProperty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Property mask.
"
::= { pmEthOamEntry 26 }
pmEthOamInternalReference OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For internal use only.
"
DEFVAL { 0 }
::= { pmEthOamEntry 27 }
pmEthOamIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Unique identifier for the EVC.
"
DEFVAL { "" }
::= { pmEthOamEntry 28 }
pmEthOamUsedPercentOfFrames OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
".
"
DEFVAL { 95 }
::= { pmEthOamEntry 29 }
pmEthOamFrameLossRatioUnavailableThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
".
"
DEFVAL { 10000 }
::= { pmEthOamEntry 30 }
pmEthOamCurrentOneWayFrameDelayVariation OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The difference in delay between two service frames
during a particular 15 minute interval.
"
::= {pmEthOamEntry 31 }
pmEthOamCurrent24hOneWayFrameDelayVariation OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The difference in delay of two service frames
during a particular 24 hour interval.
"
::= {pmEthOamEntry 32 }
-- ----------------------------------------------------
-- Ethernet Drop
-- ----------------------------------------------------
pmEthDropTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmEthDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ethernet drop counters table. Each port has a number of continuous
(free running) drop counters. The counters are reset when the traffic
unit reboots or when the attribute resetCont are set to reset."
::= { pmEthDropList 1 }
pmEthDropEntry OBJECT-TYPE
SYNTAX PmEthDropEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in interface table.
"
INDEX { pmEthDropIndex }
::= { pmEthDropTable 1 }
PmEthDropEntry ::=
SEQUENCE {
pmEthDropIndex Unsigned32,
pmEthDropName MgmtNameString,
pmEthDropSubrack SubrackNumber,
pmEthDropSlot SlotNumber,
pmEthDropPort PortNumber,
pmEthDropRxPort PortNumber,
pmEthDropResetCont INTEGER,
pmEthDropFrames Counter64,
pmEthDropBytes Counter64,
pmEthDropYellowFrames Counter64,
pmEthDropRedFrames Counter64,
pmEthDropFrames15m Counter64,
pmEthDropBytes15m Counter64,
pmEthDropYellowFrames15m Counter64,
pmEthDropRedFrames15m Counter64,
pmEthDropFrames24h Counter64,
pmEthDropBytes24h Counter64,
pmEthDropYellowFrames24h Counter64,
pmEthDropRedFrames24h Counter64,
pmEthDropFramesQ1 Counter64,
pmEthDropBytesQ1 Counter64,
pmEthDropFramesQ2 Counter64,
pmEthDropBytesQ2 Counter64,
pmEthDropFramesQ3 Counter64,
pmEthDropBytesQ3 Counter64,
pmEthDropFramesQ4 Counter64,
pmEthDropBytesQ4 Counter64,
pmEthDropFramesQ5 Counter64,
pmEthDropBytesQ5 Counter64,
pmEthDropFramesQ6 Counter64,
pmEthDropBytesQ6 Counter64,
pmEthDropFramesQ7 Counter64,
pmEthDropBytesQ7 Counter64,
pmEthDropFramesQ8 Counter64,
pmEthDropBytesQ8 Counter64,
pmEthDropFrames15mQ1 Counter64,
pmEthDropBytes15mQ1 Counter64,
pmEthDropFrames15mQ2 Counter64,
pmEthDropBytes15mQ2 Counter64,
pmEthDropFrames15mQ3 Counter64,
pmEthDropBytes15mQ3 Counter64,
pmEthDropFrames15mQ4 Counter64,
pmEthDropBytes15mQ4 Counter64,
pmEthDropFrames15mQ5 Counter64,
pmEthDropBytes15mQ5 Counter64,
pmEthDropFrames15mQ6 Counter64,
pmEthDropBytes15mQ6 Counter64,
pmEthDropFrames15mQ7 Counter64,
pmEthDropBytes15mQ7 Counter64,
pmEthDropFrames15mQ8 Counter64,
pmEthDropBytes15mQ8 Counter64,
pmEthDropFrames24hQ1 Counter64,
pmEthDropBytes24hQ1 Counter64,
pmEthDropFrames24hQ2 Counter64,
pmEthDropBytes24hQ2 Counter64,
pmEthDropFrames24hQ3 Counter64,
pmEthDropBytes24hQ3 Counter64,
pmEthDropFrames24hQ4 Counter64,
pmEthDropBytes24hQ4 Counter64,
pmEthDropFrames24hQ5 Counter64,
pmEthDropBytes24hQ5 Counter64,
pmEthDropFrames24hQ6 Counter64,
pmEthDropBytes24hQ6 Counter64,
pmEthDropFrames24hQ7 Counter64,
pmEthDropBytes24hQ7 Counter64,
pmEthDropFrames24hQ8 Counter64,
pmEthDropBytes24hQ8 Counter64,
pmEthDropIfNo PortNumber,
pmEthDropUpPortId Integer32,
pmEthDropReset15m INTEGER,
pmEthDropReset24h INTEGER,
pmEthDropReportMode INTEGER,
pmEthDropIsSuspect15Min TruthValue,
pmEthDropIsSuspect24H TruthValue}
pmEthDropIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index assigned to each if entry.
"
::= { pmEthDropEntry 1 }
pmEthDropName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the interface, for
example 'port:1:2:1-2'.
(port:[subrack]:[slot]:[Tx port]-[Rx port]).
"
::= { pmEthDropEntry 2 }
pmEthDropSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the subrack where the interface
is located.
"
::= { pmEthDropEntry 3 }
pmEthDropSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the slot where the interface is
located.
"
::= { pmEthDropEntry 4 }
pmEthDropPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the Tx port for the interface.
"
::= { pmEthDropEntry 5 }
pmEthDropRxPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the Rx port for the interface.
"
::= { pmEthDropEntry 6 }
pmEthDropResetCont OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the continuous (free running) drop counters.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset24h reset
"
DEFVAL { normal }
::= { pmEthDropEntry 7 }
pmEthDropFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of dropped continuous frames on the port.
"
::= { pmEthDropEntry 8 }
pmEthDropBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of dropped continuous bytes on the port.
"
::= { pmEthDropEntry 9 }
pmEthDropYellowFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of dropped continuous yellow frames on the port.
"
::= { pmEthDropEntry 10 }
pmEthDropRedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of dropped continuous red frames on the port.
"
::= { pmEthDropEntry 11 }
pmEthDropFramesQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous frames for queue 1 on the port.
"
::= { pmEthDropEntry 12 }
pmEthDropBytesQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous bytes for queue 1 on the port.
"
::= { pmEthDropEntry 13 }
pmEthDropFramesQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous frames for queue 2 on the port.
"
::= { pmEthDropEntry 14 }
pmEthDropBytesQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous bytes for queue 2 on the port.
"
::= { pmEthDropEntry 15 }
pmEthDropFramesQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous frames for queue 3 on the port.
"
::= { pmEthDropEntry 16 }
pmEthDropBytesQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous bytes for queue 3 on the port.
"
::= { pmEthDropEntry 17 }
pmEthDropFramesQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous frames for queue 4 on the port.
"
::= { pmEthDropEntry 18 }
pmEthDropBytesQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous bytes for queue 4 on the port.
"
::= { pmEthDropEntry 19 }
pmEthDropFramesQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous frames for queue 5 on the port.
"
::= { pmEthDropEntry 20 }
pmEthDropBytesQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous bytes for queue 5 on the port.
"
::= { pmEthDropEntry 21 }
pmEthDropFramesQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous frames for queue 6 on the port.
"
::= { pmEthDropEntry 22 }
pmEthDropBytesQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous bytes for queue 6 on the port.
"
::= { pmEthDropEntry 23 }
pmEthDropFramesQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous frames for queue 7 on the port.
"
::= { pmEthDropEntry 24 }
pmEthDropBytesQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous bytes for queue 7 on the port.
"
::= { pmEthDropEntry 25 }
pmEthDropFramesQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous frames for queue 8 on the port.
"
::= { pmEthDropEntry 26 }
pmEthDropBytesQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped continuous bytes for queue 8 on the port.
"
::= { pmEthDropEntry 27 }
pmEthDropIfNo OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number of the port.
"
::= { pmEthDropEntry 28 }
pmEthDropUpPortId OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal port reference for traffic unit.
"
::= { pmEthDropEntry 29 }
pmEthDropFrames15m OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped 15m frames on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 30 }
pmEthDropBytes15m OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped 15m bytes on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 31 }
pmEthDropYellowFrames15m OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped 15m yellow frames on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 32 }
pmEthDropRedFrames15m OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped 15m red frames on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 33 }
pmEthDropFrames24h OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped 24h frames on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 34 }
pmEthDropBytes24h OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped 24h bytes on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 35 }
pmEthDropYellowFrames24h OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped 24h yellow frames on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 36 }
pmEthDropRedFrames24h OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped 24h red frames on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 37 }
pmEthDropFrames15mQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 15m queue 1 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 38 }
pmEthDropBytes15mQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 15m queue 1 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 39 }
pmEthDropFrames24hQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 24h queue 1 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 40 }
pmEthDropBytes24hQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 24h queue 1 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 41 }
pmEthDropFrames15mQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 15m queue 2 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 42 }
pmEthDropBytes15mQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 15m queue 2 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 43 }
pmEthDropFrames24hQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 24h queue 2 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 44 }
pmEthDropBytes24hQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 24h queue 2 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 45 }
pmEthDropFrames15mQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 15m queue 3 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 46 }
pmEthDropBytes15mQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 15m queue 3 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 47 }
pmEthDropFrames24hQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 24h queue 3 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 48 }
pmEthDropBytes24hQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 24h queue 3 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 49 }
pmEthDropFrames15mQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 15m queue 4 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 50 }
pmEthDropBytes15mQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 15m queue 4 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 51 }
pmEthDropFrames24hQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 24h queue 4 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 52 }
pmEthDropBytes24hQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 24h queue 4 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 53 }
pmEthDropFrames15mQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 15m queue 5 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 54 }
pmEthDropBytes15mQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 15m queue 5 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 55 }
pmEthDropFrames24hQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 24h queue 5 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 56 }
pmEthDropBytes24hQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 24h queue 5 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 57 }
pmEthDropFrames15mQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 15m queue 6 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 58 }
pmEthDropBytes15mQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 15m queue 6 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 59 }
pmEthDropFrames24hQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 24h queue 6 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 60 }
pmEthDropBytes24hQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 24h queue 6 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 61 }
pmEthDropFrames15mQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 15m queue 7 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 62 }
pmEthDropBytes15mQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 15m queue 7 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 63 }
pmEthDropFrames24hQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 24h queue 7 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 64 }
pmEthDropBytes24hQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 24h queue 7 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 65 }
pmEthDropFrames15mQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 15m queue 8 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 66 }
pmEthDropBytes15mQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 15m queue 8 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthDropEntry 67 }
pmEthDropFrames24hQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped frames for 24h queue 8 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 68 }
pmEthDropBytes24hQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dropped bytes for 24h queue 8 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthDropEntry 69 }
pmEthDropReset15m OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 15 minutes drop counters.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset15m reset
"
DEFVAL { normal }
::= { pmEthDropEntry 70 }
pmEthDropReset24h OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 24 hours drop counters.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset24h reset
"
DEFVAL { normal }
::= { pmEthDropEntry 71 }
pmEthDropReportMode OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode for PM reporting to file on the interface.
off - PM reporting is inactive.
on - PM reporting is activated.
"
DEFVAL { on }
::= { pmEthDropEntry 72 }
pmEthDropIsSuspect15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example only contain measurements for a part of
the interval.
"
::= { pmEthDropEntry 73 }
pmEthDropIsSuspect24H OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example only contain measurements for a part of
the interval.
"
::= { pmEthDropEntry 74 }
-- ----------------------------------------------------
-- Ethernet Egress
-- ----------------------------------------------------
pmEthEgressTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmEthEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ethernet egress counters table. Each port has a number of continuous
(free running) counters. The counters are reset when the traffic
unit reboots or when the attribute resetCont, reset15m or reset24h are set to reset."
::= { pmEthEgressList 1 }
pmEthEgressEntry OBJECT-TYPE
SYNTAX PmEthEgressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in interface table.
"
INDEX { pmEthEgressIndex }
::= { pmEthEgressTable 1 }
PmEthEgressEntry ::=
SEQUENCE {
pmEthEgressIndex Unsigned32,
pmEthEgressName MgmtNameString,
pmEthEgressSubrack SubrackNumber,
pmEthEgressSlot SlotNumber,
pmEthEgressIfNo PortNumber,
pmEthEgressPort PortNumber,
pmEthEgressRxPort PortNumber,
pmEthEgressUpPortId Integer32,
pmEthEgressResetCont INTEGER,
pmEthEgressReset15m INTEGER,
pmEthEgressReset24h INTEGER,
pmEthEgressFramesQ1 Counter64,
pmEthEgressBytesQ1 Counter64,
pmEthEgressBandwidthQ1 Counter64,
pmEthEgressFrames15mQ1 Counter64,
pmEthEgressBytes15mQ1 Counter64,
pmEthEgressFrames24hQ1 Counter64,
pmEthEgressBytes24hQ1 Counter64,
pmEthEgressFramesQ2 Counter64,
pmEthEgressBytesQ2 Counter64,
pmEthEgressBandwidthQ2 Counter64,
pmEthEgressFrames15mQ2 Counter64,
pmEthEgressBytes15mQ2 Counter64,
pmEthEgressFrames24hQ2 Counter64,
pmEthEgressBytes24hQ2 Counter64,
pmEthEgressFramesQ3 Counter64,
pmEthEgressBytesQ3 Counter64,
pmEthEgressBandwidthQ3 Counter64,
pmEthEgressFrames15mQ3 Counter64,
pmEthEgressBytes15mQ3 Counter64,
pmEthEgressFrames24hQ3 Counter64,
pmEthEgressBytes24hQ3 Counter64,
pmEthEgressFramesQ4 Counter64,
pmEthEgressBytesQ4 Counter64,
pmEthEgressBandwidthQ4 Counter64,
pmEthEgressFrames15mQ4 Counter64,
pmEthEgressBytes15mQ4 Counter64,
pmEthEgressFrames24hQ4 Counter64,
pmEthEgressBytes24hQ4 Counter64,
pmEthEgressFramesQ5 Counter64,
pmEthEgressBytesQ5 Counter64,
pmEthEgressBandwidthQ5 Counter64,
pmEthEgressFrames15mQ5 Counter64,
pmEthEgressBytes15mQ5 Counter64,
pmEthEgressFrames24hQ5 Counter64,
pmEthEgressBytes24hQ5 Counter64,
pmEthEgressFramesQ6 Counter64,
pmEthEgressBytesQ6 Counter64,
pmEthEgressBandwidthQ6 Counter64,
pmEthEgressFrames15mQ6 Counter64,
pmEthEgressBytes15mQ6 Counter64,
pmEthEgressFrames24hQ6 Counter64,
pmEthEgressBytes24hQ6 Counter64,
pmEthEgressFramesQ7 Counter64,
pmEthEgressBytesQ7 Counter64,
pmEthEgressBandwidthQ7 Counter64,
pmEthEgressFrames15mQ7 Counter64,
pmEthEgressBytes15mQ7 Counter64,
pmEthEgressFrames24hQ7 Counter64,
pmEthEgressBytes24hQ7 Counter64,
pmEthEgressFramesQ8 Counter64,
pmEthEgressBytesQ8 Counter64,
pmEthEgressBandwidthQ8 Counter64,
pmEthEgressFrames15mQ8 Counter64,
pmEthEgressBytes15mQ8 Counter64,
pmEthEgressFrames24hQ8 Counter64,
pmEthEgressBytes24hQ8 Counter64,
pmEthEgressReportMode INTEGER,
pmEthEgressIsSuspect15Min TruthValue,
pmEthEgressIsSuspect24H TruthValue}
pmEthEgressIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index assigned to each if entry.
"
::= { pmEthEgressEntry 1 }
pmEthEgressName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the interface, for
example 'port:1:2:1-2'.
(port:[subrack]:[slot]:[Tx port]-[Rx port]).
"
::= { pmEthEgressEntry 2 }
pmEthEgressSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the subrack where the interface
is located.
"
::= { pmEthEgressEntry 3 }
pmEthEgressSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the slot where the interface is
located.
"
::= { pmEthEgressEntry 4 }
pmEthEgressIfNo OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number of the port.
"
::= { pmEthEgressEntry 5 }
pmEthEgressPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the Tx port for the interface.
"
::= { pmEthEgressEntry 6 }
pmEthEgressRxPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the Rx port for the interface.
"
::= { pmEthEgressEntry 7 }
pmEthEgressUpPortId OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal port reference for traffic unit.
"
::= { pmEthEgressEntry 8 }
pmEthEgressResetCont OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the continuous (free running) egress counters.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set resetCont reset
"
DEFVAL { normal }
::= { pmEthEgressEntry 9 }
pmEthEgressReset15m OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 15m egress counters.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset15m reset
"
DEFVAL { normal }
::= { pmEthEgressEntry 10 }
pmEthEgressReset24h OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the 24h egress counters.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set reset24hm reset
"
DEFVAL { normal }
::= { pmEthEgressEntry 11 }
pmEthEgressFramesQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress frames for queue 1 on the port.
"
::= { pmEthEgressEntry 12 }
pmEthEgressBytesQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress bytes for queue 1 on the port.
"
::= { pmEthEgressEntry 13 }
pmEthEgressBandwidthQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data rate bandwidth for queue 1 on the port, in kbps.
"
::= { pmEthEgressEntry 14 }
pmEthEgressFrames15mQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress frames for queue 1 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 15 }
pmEthEgressBytes15mQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress bytes for queue 1 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 16 }
pmEthEgressFrames24hQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress frames for queue 1 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 17 }
pmEthEgressBytes24hQ1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress bytes for queue 1 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 18 }
pmEthEgressFramesQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress frames for queue 2 on the port.
"
::= { pmEthEgressEntry 19 }
pmEthEgressBytesQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress bytes for queue 2 on the port.
"
::= { pmEthEgressEntry 20 }
pmEthEgressBandwidthQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data rate bandwidth for queue 2 on the port, in kbps.
"
::= { pmEthEgressEntry 21 }
pmEthEgressFrames15mQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress frames for queue 2 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 22 }
pmEthEgressBytes15mQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress bytes for queue 2 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 23 }
pmEthEgressFrames24hQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress frames for queue 2 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 24 }
pmEthEgressBytes24hQ2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress bytes for queue 2 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 25 }
pmEthEgressFramesQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress frames for queue 3 on the port.
"
::= { pmEthEgressEntry 26 }
pmEthEgressBytesQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress bytes for queue 3 on the port.
"
::= { pmEthEgressEntry 27 }
pmEthEgressBandwidthQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data rate bandwidth for queue 3 on the port, in kbps.
"
::= { pmEthEgressEntry 28 }
pmEthEgressFrames15mQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress frames for queue 3 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 29 }
pmEthEgressBytes15mQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress bytes for queue 3 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 30 }
pmEthEgressFrames24hQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress frames for queue 3 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 31 }
pmEthEgressBytes24hQ3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress bytes for queue 3 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 32 }
pmEthEgressFramesQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress frames for queue 4 on the port.
"
::= { pmEthEgressEntry 33 }
pmEthEgressBytesQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress bytes for queue 4 on the port.
"
::= { pmEthEgressEntry 34 }
pmEthEgressBandwidthQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data rate bandwidth for queue 4 on the port, in kbps.
"
::= { pmEthEgressEntry 35 }
pmEthEgressFrames15mQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress frames for queue 4 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 36 }
pmEthEgressBytes15mQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress bytes for queue 4 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 37 }
pmEthEgressFrames24hQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress frames for queue 4 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 38 }
pmEthEgressBytes24hQ4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress bytes for queue 4 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 39 }
pmEthEgressFramesQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress frames for queue 5 on the port.
"
::= { pmEthEgressEntry 40 }
pmEthEgressBytesQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress bytes for queue 5 on the port.
"
::= { pmEthEgressEntry 41 }
pmEthEgressBandwidthQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data rate bandwidth for queue 5 on the port, in kbps.
"
::= { pmEthEgressEntry 42 }
pmEthEgressFrames15mQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress frames for queue 5 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 43 }
pmEthEgressBytes15mQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress bytes for queue 5 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 44 }
pmEthEgressFrames24hQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress frames for queue 5 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 45 }
pmEthEgressBytes24hQ5 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress bytes for queue 5 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 46 }
pmEthEgressFramesQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress frames for queue 6 on the port.
"
::= { pmEthEgressEntry 47 }
pmEthEgressBytesQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress bytes for queue 6 on the port.
"
::= { pmEthEgressEntry 48 }
pmEthEgressBandwidthQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data rate bandwidth for queue 6 on the port, in kbps.
"
::= { pmEthEgressEntry 49 }
pmEthEgressFrames15mQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress frames for queue 6 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 50 }
pmEthEgressBytes15mQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress bytes for queue 6 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 51 }
pmEthEgressFrames24hQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress frames for queue 6 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 52 }
pmEthEgressBytes24hQ6 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress bytes for queue 6 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 53 }
pmEthEgressFramesQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress frames for queue 7 on the port.
"
::= { pmEthEgressEntry 54 }
pmEthEgressBytesQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress bytes for queue 7 on the port.
"
::= { pmEthEgressEntry 55 }
pmEthEgressBandwidthQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data rate bandwidth for queue 7 on the port, in kbps.
"
::= { pmEthEgressEntry 56 }
pmEthEgressFrames15mQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress frames for queue 7 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 57 }
pmEthEgressBytes15mQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress bytes for queue 7 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 58 }
pmEthEgressFrames24hQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress frames for queue 7 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 59 }
pmEthEgressBytes24hQ7 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress bytes for queue 7 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 60 }
pmEthEgressFramesQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress frames for queue 8 on the port.
"
::= { pmEthEgressEntry 61 }
pmEthEgressBytesQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of continuous egress bytes for queue 8 on the port.
"
::= { pmEthEgressEntry 62 }
pmEthEgressBandwidthQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data rate bandwidth for queue 8 on the port, in kbps.
"
::= { pmEthEgressEntry 63 }
pmEthEgressFrames15mQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress frames for queue 8 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 64 }
pmEthEgressBytes15mQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 15m egress bytes for queue 8 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
"
::= { pmEthEgressEntry 65 }
pmEthEgressFrames24hQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress frames for queue 8 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 66 }
pmEthEgressBytes24hQ8 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 24h egress bytes for queue 8 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
"
::= { pmEthEgressEntry 67 }
pmEthEgressReportMode OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode for PM reporting to file on the interface.
off - PM reporting is inactive.
on - PM reporting is activated.
"
DEFVAL { on }
::= { pmEthEgressEntry 68 }
pmEthEgressIsSuspect15Min OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example only contain measurements for a part of
the interval.
"
::= { pmEthEgressEntry 69 }
pmEthEgressIsSuspect24H OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this
interface is suspect. The current interval may
for example only contain measurements for a part of
the interval.
"
::= { pmEthEgressEntry 70 }
-- ----------------------------------------------------
-- Ethernet classification
-- ----------------------------------------------------
pmEthClassificationTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmEthClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ethernet classification counters table. Each classification has two
continuous (free running) counters. The counters are reset when the traffic
unit reboots or when the attribute resetCont are set to reset."
::= { pmEthClassificationList 1 }
pmEthClassificationEntry OBJECT-TYPE
SYNTAX PmEthClassificationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in interface table.
"
INDEX { pmEthClassificationIndex }
::= { pmEthClassificationTable 1 }
PmEthClassificationEntry ::=
SEQUENCE {
pmEthClassificationIndex Unsigned32,
pmEthClassificationName MgmtNameString,
pmEthClassificationSubrack SubrackNumber,
pmEthClassificationSlot SlotNumber,
pmEthClassificationIdentifier DisplayString,
pmEthClassificationResetCont INTEGER,
pmEthClassificationInternalReference Unsigned32,
pmEthClassificationCounter1 Counter64,
pmEthClassificationCounter2 Counter64,
pmEthClassificationCounter3 Counter64,
pmEthClassificationCounter4 Counter64 }
pmEthClassificationIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index assigned to each classification entry.
"
::= { pmEthClassificationEntry 1 }
pmEthClassificationName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the interface, for
example 'class:1:2:id1'.
(class:[subrack]:[slot]:[identifier]).
"
::= { pmEthClassificationEntry 2 }
pmEthClassificationSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the subrack where the interface is located.
"
::= { pmEthClassificationEntry 3 }
pmEthClassificationSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the slot where the interface is located.
"
::= { pmEthClassificationEntry 4 }
pmEthClassificationIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique identifier for the classification.
"
::= { pmEthClassificationEntry 5 }
pmEthClassificationResetCont OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
reset (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the continuous (free running) classification counters.
After a successful reset the default value
(normal) is restored in this action attribute.
"
DEFVAL { normal }
::= { pmEthClassificationEntry 6 }
pmEthClassificationInternalReference OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For internal use only.
"
DEFVAL { 0 }
::= { pmEthClassificationEntry 7 }
pmEthClassificationCounter1 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of green and yellow frames in the classification.
"
::= { pmEthClassificationEntry 8 }
pmEthClassificationCounter2 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of red (not delivered) frames in the classification.
"
::= { pmEthClassificationEntry 9 }
pmEthClassificationCounter3 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of green and yellow bytes in the classification.
"
::= { pmEthClassificationEntry 10 }
pmEthClassificationCounter4 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of red (not delivered) bytes in the classification.
"
::= { pmEthClassificationEntry 11 }
-- ----------------------------------------------------
-- Object and event groups
-- ----------------------------------------------------
pmGeneralGroup OBJECT-GROUP
OBJECTS {
pmGeneralLastChangeTime }
STATUS deprecated
DESCRIPTION
"The general objects."
::= { lumPmGroups 1 }
pmIntervalGroup OBJECT-GROUP
OBJECTS {
pmIntervalSubrack,
pmIntervalSlot,
pmIntervalPort,
pmIntervalNumber,
pmIntervalIsSuspect,
pmIntervalRxES,
pmIntervalRxSES,
pmIntervalRxBBE,
pmIntervalRxUAS,
pmIntervalTxES,
pmIntervalTxSES,
pmIntervalTxBBE,
pmIntervalTxUAS,
pmIntervalName }
STATUS deprecated
DESCRIPTION
"The 15 minute interval objects."
::= { lumPmGroups 3 }
pmInterval24hGroup OBJECT-GROUP
OBJECTS {
pmInterval24hSubrack,
pmInterval24hSlot,
pmInterval24hPort,
pmInterval24hNumber,
pmInterval24hIsSuspect,
pmInterval24hRxES,
pmInterval24hRxSES,
pmInterval24hRxBBE,
pmInterval24hRxUAS,
pmInterval24hTxES,
pmInterval24hTxSES,
pmInterval24hTxBBE,
pmInterval24hTxUAS,
pmInterval24hName }
STATUS deprecated
DESCRIPTION
"The 24 hour interval objects."
::= { lumPmGroups 5 }
pmIfGroup OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS }
STATUS deprecated
DESCRIPTION
"The pm interface configuration and current meters objects."
::= { lumPmGroups 6 }
pmLogGeneralGroup OBJECT-GROUP
OBJECTS {
pmLogGeneralLastChangeTime,
pmLogGeneralSize,
pmLogGeneralSize24h }
STATUS deprecated
DESCRIPTION
"The general log object."
::= { lumPmGroups 7 }
pmFileGroup OBJECT-GROUP
OBJECTS {
pmFileIndex,
pmFileName,
pmFileCreatedTime }
STATUS deprecated
DESCRIPTION
"The 15 minute interval file objects."
::= { lumPmGroups 8 }
pmFile24hGroup OBJECT-GROUP
OBJECTS {
pmFile24hIndex,
pmFile24hName,
pmFile24hCreatedTime }
STATUS deprecated
DESCRIPTION
"The 24 hour interval file objects."
::= { lumPmGroups 9 }
pmNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
pmFileAdded,
pmFile24hAdded }
STATUS current
DESCRIPTION
"The pm notifications."
::= { lumPmGroups 10 }
pmIfGroupV2 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort }
STATUS deprecated
DESCRIPTION
"The pm interface configuration and current meters objects V2."
::= { lumPmGroups 11 }
pmGeneralGroupV2 OBJECT-GROUP
OBJECTS {
pmGeneralLastChangeTime,
pmGeneralStateLastChangeTime }
STATUS deprecated
DESCRIPTION
"The general objects."
::= { lumPmGroups 12 }
pmControlGroup OBJECT-GROUP
OBJECTS {
pmControlReset15Min,
pmControlReset24H }
STATUS deprecated
DESCRIPTION
"The control group."
::= { lumPmGroups 13 }
pmIfGroupV3 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort,
pmIfReset15Min,
pmIfReset24H }
STATUS current
DESCRIPTION
"The pm interface configuration and current meters objects V3."
::= { lumPmGroups 14 }
pmFileGroupV2 OBJECT-GROUP
OBJECTS {
pmFileIndex,
pmFileName,
pmFileCreatedTime,
pmFileSeqNumber }
STATUS current
DESCRIPTION
"The 15 minute interval file objects V2."
::= { lumPmGroups 15 }
pmFile24hGroupV2 OBJECT-GROUP
OBJECTS {
pmFile24hIndex,
pmFile24hName,
pmFile24hCreatedTime,
pmFile24hSeqNumber }
STATUS current
DESCRIPTION
"The 24 hour interval file objects V2."
::= { lumPmGroups 16 }
pmIfGroupV4 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort,
pmIfReset15Min,
pmIfReset24H,
pmIfAdminStatus,
pmIfOperStatus }
STATUS deprecated
DESCRIPTION
"The pm interface configuration and current meters objects V4."
::= { lumPmGroups 17 }
pmIfGroupV5 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort,
pmIfReset15Min,
pmIfReset24H,
pmIfAdminStatus,
pmIfOperStatus,
pmIfIsSuspect15Min,
pmIfIsSuspect24H }
STATUS deprecated
DESCRIPTION
"The pm interface configuration and current meters objects V4."
::= { lumPmGroups 18 }
pmFileGroupV3 OBJECT-GROUP
OBJECTS {
pmFileIndex,
pmFileName,
pmFileCreatedTime,
pmFileSeqNumber,
pmFileStartTime,
pmFileStopTime }
STATUS deprecated
DESCRIPTION
"The 15 minute interval file objects V3."
::= { lumPmGroups 19 }
pmFile24hGroupV3 OBJECT-GROUP
OBJECTS {
pmFile24hIndex,
pmFile24hName,
pmFile24hCreatedTime,
pmFile24hSeqNumber,
pmFile24hStartTime,
pmFile24hStopTime }
STATUS deprecated
DESCRIPTION
"The 24 hour interval file objects V3."
::= { lumPmGroups 20 }
pmFileGroupV4 OBJECT-GROUP
OBJECTS {
pmFileIndex,
pmFileName,
pmFileCreatedTime,
pmFileSeqNumber,
pmFileStartTime,
pmFileStopTime,
pmFileUrl }
STATUS current
DESCRIPTION
"The 15 minute interval file objects V4."
::= { lumPmGroups 21 }
pmFile24hGroupV4 OBJECT-GROUP
OBJECTS {
pmFile24hIndex,
pmFile24hName,
pmFile24hCreatedTime,
pmFile24hSeqNumber,
pmFile24hStartTime,
pmFile24hStopTime,
pmFile24hUrl }
STATUS current
DESCRIPTION
"The 24 hour interval file objects V4."
::= { lumPmGroups 22 }
pmIntervalGroupV2 OBJECT-GROUP
OBJECTS {
pmIntervalSubrack,
pmIntervalSlot,
pmIntervalPort,
pmIntervalNumber,
pmIntervalIsSuspect,
pmIntervalRxES,
pmIntervalRxSES,
pmIntervalRxBBE,
pmIntervalRxUAS,
pmIntervalTxES,
pmIntervalTxSES,
pmIntervalTxBBE,
pmIntervalTxUAS,
pmIntervalName,
pmIntervalRxPowerLevel }
STATUS deprecated
DESCRIPTION
"The 15 minute interval objects V2."
::= { lumPmGroups 23 }
pmInterval24hGroupV2 OBJECT-GROUP
OBJECTS {
pmInterval24hSubrack,
pmInterval24hSlot,
pmInterval24hPort,
pmInterval24hNumber,
pmInterval24hIsSuspect,
pmInterval24hRxES,
pmInterval24hRxSES,
pmInterval24hRxBBE,
pmInterval24hRxUAS,
pmInterval24hTxES,
pmInterval24hTxSES,
pmInterval24hTxBBE,
pmInterval24hTxUAS,
pmInterval24hName,
pmInterval24hRxPowerLevel }
STATUS deprecated
DESCRIPTION
"The 24 hour interval objects V2."
::= { lumPmGroups 24 }
pmIfGroupV6 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort,
pmIfReset15Min,
pmIfReset24H,
pmIfAdminStatus,
pmIfOperStatus,
pmIfIsSuspect15Min,
pmIfIsSuspect24H,
pmIfInstallCommand,
pmIfRxPowerLevel,
pmIfInitialPowerLevel }
STATUS deprecated
DESCRIPTION
"The pm interface configuration and current meters objects V6."
::= { lumPmGroups 25 }
pmLogGeneralGroupV2 OBJECT-GROUP
OBJECTS {
pmLogGeneralLastChangeTime,
pmLogGeneralSize,
pmLogGeneralSize24h,
pmLogGeneralFileTableSize,
pmLogGeneralFile24hTableSize }
STATUS deprecated
DESCRIPTION
"The general log object."
::= { lumPmGroups 26 }
pmIntervalGroupV3 OBJECT-GROUP
OBJECTS {
pmIntervalSubrack,
pmIntervalSlot,
pmIntervalPort,
pmIntervalNumber,
pmIntervalIsSuspect,
pmIntervalRxES,
pmIntervalRxSES,
pmIntervalRxBBE,
pmIntervalRxUAS,
pmIntervalTxES,
pmIntervalTxSES,
pmIntervalTxBBE,
pmIntervalTxUAS,
pmIntervalName,
pmIntervalRxPowerLevel,
pmIntervalGbeMaxUtilization }
STATUS deprecated
DESCRIPTION
"The 15 minute interval objects V3."
::= { lumPmGroups 27 }
pmInterval24hGroupV3 OBJECT-GROUP
OBJECTS {
pmInterval24hSubrack,
pmInterval24hSlot,
pmInterval24hPort,
pmInterval24hNumber,
pmInterval24hIsSuspect,
pmInterval24hRxES,
pmInterval24hRxSES,
pmInterval24hRxBBE,
pmInterval24hRxUAS,
pmInterval24hTxES,
pmInterval24hTxSES,
pmInterval24hTxBBE,
pmInterval24hTxUAS,
pmInterval24hName,
pmInterval24hRxPowerLevel,
pmInterval24hGbeMaxUtilization }
STATUS deprecated
DESCRIPTION
"The 24 hour interval objects V3."
::= { lumPmGroups 28 }
pmIfGroupV7 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort,
pmIfReset15Min,
pmIfReset24H,
pmIfAdminStatus,
pmIfOperStatus,
pmIfIsSuspect15Min,
pmIfIsSuspect24H,
pmIfInstallCommand,
pmIfRxPowerLevel,
pmIfInitialPowerLevel,
pmIfRxGbeMaxUtilization,
pmIfRx24hGbeMaxUtilization }
STATUS deprecated
DESCRIPTION
"The pm interface configuration and current meters objects V7 (3.1)."
::= { lumPmGroups 29 }
pmGeneralGroupV3 OBJECT-GROUP
OBJECTS {
pmGeneralLastChangeTime,
pmGeneralStateLastChangeTime,
pmGeneralPmIfTableSize }
STATUS deprecated
DESCRIPTION
"The general objects. (3.1)"
::= { lumPmGroups 30 }
pmLogGeneralGroupV3 OBJECT-GROUP
OBJECTS {
pmLogGeneralLastChangeTime,
pmLogGeneralSize,
pmLogGeneralSize24h,
pmLogGeneralFileTableSize,
pmLogGeneralFile24hTableSize,
pmLogGeneralInterval15mTableSize,
pmLogGeneralInterval24hTableSize,
pmLogGeneralInterval15mShowNonZeroOnly,
pmLogGeneralInterval24hShowNonZeroOnly }
STATUS deprecated
DESCRIPTION
"The general log object."
::= { lumPmGroups 31 }
pmIntervalGroupV4 OBJECT-GROUP
OBJECTS {
pmIntervalSubrack,
pmIntervalSlot,
pmIntervalPort,
pmIntervalNumber,
pmIntervalIsSuspect,
pmIntervalRxES,
pmIntervalRxSES,
pmIntervalRxBBE,
pmIntervalRxUAS,
pmIntervalTxES,
pmIntervalTxSES,
pmIntervalTxBBE,
pmIntervalTxUAS,
pmIntervalName,
pmIntervalGbeMaxUtilization }
STATUS deprecated
DESCRIPTION
"The 15 minute interval objects V4."
::= { lumPmGroups 32 }
pmInterval24hGroupV4 OBJECT-GROUP
OBJECTS {
pmInterval24hSubrack,
pmInterval24hSlot,
pmInterval24hPort,
pmInterval24hNumber,
pmInterval24hIsSuspect,
pmInterval24hRxES,
pmInterval24hRxSES,
pmInterval24hRxBBE,
pmInterval24hRxUAS,
pmInterval24hTxES,
pmInterval24hTxSES,
pmInterval24hTxBBE,
pmInterval24hTxUAS,
pmInterval24hName,
pmInterval24hGbeMaxUtilization }
STATUS deprecated
DESCRIPTION
"The 24 hour interval objects V4."
::= { lumPmGroups 33 }
pmIfGroupV8 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort,
pmIfReset15Min,
pmIfReset24H,
pmIfAdminStatus,
pmIfOperStatus,
pmIfIsSuspect15Min,
pmIfIsSuspect24H,
pmIfInstallCommand,
pmIfRxPowerLevel,
pmIfInitialPowerLevel,
pmIfRxGbeMaxUtilization,
pmIfRx24hGbeMaxUtilization,
pmIfTxPowerLevel }
STATUS deprecated
DESCRIPTION
"The pm interface configuration and current meters objects V8 (6.0)."
::= { lumPmGroups 34 }
pmIntervalGroupV5 OBJECT-GROUP
OBJECTS {
pmIntervalSubrack,
pmIntervalSlot,
pmIntervalPort,
pmIntervalNumber,
pmIntervalIsSuspect,
pmIntervalRxES,
pmIntervalRxSES,
pmIntervalRxBBE,
pmIntervalRxUAS,
pmIntervalTxES,
pmIntervalTxSES,
pmIntervalTxBBE,
pmIntervalTxUAS,
pmIntervalName,
pmIntervalRxPowerLevel,
pmIntervalGbeMaxUtilization,
pmIntervalTxPowerLevel }
STATUS deprecated
DESCRIPTION
"The 15 minute interval objects V5. (6.0)"
::= { lumPmGroups 35 }
pmInterval24hGroupV5 OBJECT-GROUP
OBJECTS {
pmInterval24hSubrack,
pmInterval24hSlot,
pmInterval24hPort,
pmInterval24hNumber,
pmInterval24hIsSuspect,
pmInterval24hRxES,
pmInterval24hRxSES,
pmInterval24hRxBBE,
pmInterval24hRxUAS,
pmInterval24hTxES,
pmInterval24hTxSES,
pmInterval24hTxBBE,
pmInterval24hTxUAS,
pmInterval24hName,
pmInterval24hRxPowerLevel,
pmInterval24hGbeMaxUtilization,
pmInterval24hTxPowerLevel }
STATUS deprecated
DESCRIPTION
"The 24 hour interval objects V5. (6.0)"
::= { lumPmGroups 36 }
pmLogGeneralGroupV4 OBJECT-GROUP
OBJECTS {
pmLogGeneralLastChangeTime,
pmLogGeneralSize,
pmLogGeneralSize24h,
pmLogGeneralFileTableSize,
pmLogGeneralFile24hTableSize,
pmLogGeneralInterval15mTableSize,
pmLogGeneralInterval24hTableSize,
pmLogGeneralInterval15mShowNonZeroOnly,
pmLogGeneralInterval24hShowNonZeroOnly,
pmLogGeneralFile15mLastSeqNumber,
pmLogGeneralFile24hLastSeqNumber }
STATUS deprecated
DESCRIPTION
"The general log object v4 (10.0)."
::= { lumPmGroups 37 }
pmIfGroupV9 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort,
pmIfReset15Min,
pmIfReset24H,
pmIfAdminStatus,
pmIfOperStatus,
pmIfIsSuspect15Min,
pmIfIsSuspect24H,
pmIfInstallCommand,
pmIfRxPowerLevel,
pmIfInitialPowerLevel,
pmIfRxGbeMaxUtilization,
pmIfRx24hGbeMaxUtilization,
pmIfTxPowerLevel,
pmIfObjectProperty}
STATUS deprecated
DESCRIPTION
"The pm interface configuration and current meters objects V9 (11.0)."
::= { lumPmGroups 38 }
pmIntervalGroupV6 OBJECT-GROUP
OBJECTS {
pmIntervalSubrack,
pmIntervalSlot,
pmIntervalPort,
pmIntervalNumber,
pmIntervalIsSuspect,
pmIntervalRxES,
pmIntervalRxSES,
pmIntervalRxBBE,
pmIntervalRxUAS,
pmIntervalTxES,
pmIntervalTxSES,
pmIntervalTxBBE,
pmIntervalTxUAS,
pmIntervalName,
pmIntervalRxPowerLevel,
pmIntervalGbeMaxUtilization,
pmIntervalTxPowerLevel,
pmIntervalRxUndersizedFrames,
pmIntervalRxOversizedFrames,
pmIntervalRxFragments,
pmIntervalRxFcsErrors,
pmIntervalRxInvalidCeVlanId,
pmIntervalTxOctets,
pmIntervalTxFrames,
pmIntervalTxUnicastFrames,
pmIntervalTxMulticastFrames,
pmIntervalTxBroadcastFrames,
pmIntervalRxOctets,
pmIntervalRxFrames,
pmIntervalRxUnicastFrames,
pmIntervalRxMulticastFrames,
pmIntervalRxBroadcastFrames,
pmIntervalIngressGreenFrameCount,
pmIntervalIngressYellowFrameCount,
pmIntervalIngressRedFrameCount,
pmIntervalIngressGreenOctetCount,
pmIntervalIngressYellowOctetCount,
pmIntervalIngressRedOctetCount,
pmIntervalEgressGreenFrameCount,
pmIntervalEgressGreenOctetCount,
pmIntervalGreenFrameDiscards,
pmIntervalYellowFrameDiscards,
pmIntervalGreenOctetDiscards,
pmIntervalYellowOctetDiscards,
pmIntervalTwoWayFrameDelay,
pmIntervalTwoWayFrameDelayVariation,
pmIntervalFrameLossRatioNearEnd,
pmIntervalFrameLossRatioFarEnd,
pmIntervalUnavailabilityNearEnd,
pmIntervalUnavailabilityFarEnd,
pmIntervalOneWayFrameDelayVariation }
-- @todo objectclass?
STATUS deprecated
DESCRIPTION
"The 15 minute interval objects V6. (11.0)"
::= { lumPmGroups 39 }
pmInterval24hGroupV6 OBJECT-GROUP
OBJECTS {
pmInterval24hSubrack,
pmInterval24hSlot,
pmInterval24hPort,
pmInterval24hNumber,
pmInterval24hIsSuspect,
pmInterval24hRxES,
pmInterval24hRxSES,
pmInterval24hRxBBE,
pmInterval24hRxUAS,
pmInterval24hTxES,
pmInterval24hTxSES,
pmInterval24hTxBBE,
pmInterval24hTxUAS,
pmInterval24hName,
pmInterval24hRxPowerLevel,
pmInterval24hGbeMaxUtilization,
pmInterval24hTxPowerLevel,
pmInterval24hRxUndersizedFrames,
pmInterval24hRxOversizedFrames,
pmInterval24hRxFragments,
pmInterval24hRxFcsErrors,
pmInterval24hRxInvalidCeVlanId,
pmInterval24hTxOctets,
pmInterval24hTxFrames,
pmInterval24hTxUnicastFrames,
pmInterval24hTxMulticastFrames,
pmInterval24hTxBroadcastFrames,
pmInterval24hRxOctets,
pmInterval24hRxFrames,
pmInterval24hRxUnicastFrames,
pmInterval24hRxMulticastFrames,
pmInterval24hRxBroadcastFrames,
pmInterval24hIngressGreenFrameCount,
pmInterval24hIngressYellowFrameCount,
pmInterval24hIngressRedFrameCount,
pmInterval24hIngressGreenOctetCount,
pmInterval24hIngressYellowOctetCount,
pmInterval24hIngressRedOctetCount,
pmInterval24hEgressGreenFrameCount,
pmInterval24hEgressGreenOctetCount,
pmInterval24hGreenFrameDiscards,
pmInterval24hYellowFrameDiscards,
pmInterval24hGreenOctetDiscards,
pmInterval24hYellowOctetDiscards,
pmInterval24hTwoWayFrameDelay,
pmInterval24hTwoWayFrameDelayVariation,
pmInterval24hFrameLossRatioNearEnd,
pmInterval24hFrameLossRatioFarEnd,
pmInterval24hUnavailabilityNearEnd,
pmInterval24hUnavailabilityFarEnd,
pmInterval24hOneWayFrameDelayVariation }
-- @todo objectclass?
STATUS deprecated
DESCRIPTION
"The 24 hour interval objects V6. (11.0)"
::= { lumPmGroups 40 }
pmEthTdGroup OBJECT-GROUP
OBJECTS {
pmEthTdIndex,
pmEthTdName,
pmEthTdSubrack,
pmEthTdSlot,
pmEthTdPort,
pmEthTdPmReportMode,
pmEthTdRxPort,
pmEthTdReset15Min,
pmEthTdReset24H,
pmEthTdAdminStatus,
pmEthTdOperStatus,
pmEthTdIsSuspect15Min,
pmEthTdIsSuspect24h,
pmEthTdCurrentRxUndersizedFrames,
pmEthTdCurrentRxOversizedFrames,
pmEthTdCurrentRxFragments,
pmEthTdCurrentRxFcsErrors,
pmEthTdCurrentRxInvalidCeVlanId,
pmEthTdCurrentTxOctets,
pmEthTdCurrentTxFrames,
pmEthTdCurrentTxUnicastFrames,
pmEthTdCurrentTxMulticastFrames,
pmEthTdCurrentTxBroadcastFrames,
pmEthTdCurrentRxOctets,
pmEthTdCurrentRxFrames,
pmEthTdCurrentRxUnicastFrames,
pmEthTdCurrentRxMulticastFrames,
pmEthTdCurrentRxBroadcastFrames,
pmEthTdCurrent24hRxUndersizedFrames,
pmEthTdCurrent24hRxOversizedFrames,
pmEthTdCurrent24hRxFragments,
pmEthTdCurrent24hRxFcsErrors,
pmEthTdCurrent24hRxInvalidCeVlanId,
pmEthTdCurrent24hTxOctets,
pmEthTdCurrent24hTxFrames,
pmEthTdCurrent24hTxUnicastFrames,
pmEthTdCurrent24hTxMulticastFrames,
pmEthTdCurrent24hTxBroadcastFrames,
pmEthTdCurrent24hRxOctets,
pmEthTdCurrent24hRxFrames,
pmEthTdCurrent24hRxUnicastFrames,
pmEthTdCurrent24hRxMulticastFrames,
pmEthTdCurrent24hRxBroadcastFrames,
pmEthTdObjectProperty,
pmEthTdRxUndersizedFramesThreshold,
pmEthTdRxOversizedFramesThreshold,
pmEthTdRxFragmentsThreshold,
pmEthTdRxFcsErrorsThreshold,
pmEthTdRxInvalidCeVlanIdThreshold,
pmEthTd24hRxUndersizedFramesThreshold,
pmEthTd24hRxOversizedFramesThreshold,
pmEthTd24hRxFragmentsThreshold,
pmEthTd24hRxFcsErrorsThreshold,
pmEthTd24hRxInvalidCeVlanIdThreshold,
pmEthTdRxUndersizedFrames,
pmEthTdRxOversizedFrames,
pmEthTdRxFragments,
pmEthTdRxFcsErrors,
pmEthTdRxInvalidCeVlanId,
pmEthTd24hRxUndersizedFrames,
pmEthTd24hRxOversizedFrames,
pmEthTd24hRxFragments,
pmEthTd24hRxFcsErrors,
pmEthTd24hRxInvalidCeVlanId }
STATUS deprecated
DESCRIPTION
"The Ethernet Traffic Data PM configuration and current meters objects V1 (11.0)."
::= { lumPmGroups 41 }
pmEthTmGroup OBJECT-GROUP
OBJECTS {
pmEthTmIndex,
pmEthTmName,
pmEthTmSubrack,
pmEthTmSlot,
pmEthTmPort,
pmEthTmPmReportMode,
pmEthTmRxPort,
pmEthTmReset15Min,
pmEthTmReset24H,
pmEthTmAdminStatus,
pmEthTmOperStatus,
pmEthTmIsSuspect15Min,
pmEthTmIsSuspect24h,
pmEthTmCurrentIngressGreenFrameCount,
pmEthTmCurrentIngressYellowFrameCount,
pmEthTmCurrentIngressRedFrameCount,
pmEthTmCurrentIngressGreenOctetCount,
pmEthTmCurrentIngressYellowOctetCount,
pmEthTmCurrentIngressRedOctetCount,
pmEthTmCurrentEgressGreenFrameCount,
pmEthTmCurrentEgressGreenOctetCount,
pmEthTmCurrentGreenFrameDiscards,
pmEthTmCurrentYellowFrameDiscards,
pmEthTmCurrentGreenOctetDiscards,
pmEthTmCurrentYellowOctetDiscards,
pmEthTmCurrent24hIngressGreenFrameCount,
pmEthTmCurrent24hIngressYellowFrameCount,
pmEthTmCurrent24hIngressRedFrameCount,
pmEthTmCurrent24hIngressGreenOctetCount,
pmEthTmCurrent24hIngressYellowOctetCount,
pmEthTmCurrent24hIngressRedOctetCount,
pmEthTmCurrent24hEgressGreenFrameCount,
pmEthTmCurrent24hEgressGreenOctetCount,
pmEthTmCurrent24hGreenFrameDiscards,
pmEthTmCurrent24hYellowFrameDiscards,
pmEthTmCurrent24hGreenOctetDiscards,
pmEthTmCurrent24hYellowOctetDiscards,
pmEthTmObjectProperty,
pmEthTmInternalReference,
pmEthTmIdentifier }
STATUS current
DESCRIPTION
"The Ethernet Traffic Management PM configuration and current meters objects V1 (11.0)."
::= { lumPmGroups 42 }
pmEthOamGroup OBJECT-GROUP
OBJECTS {
pmEthOamIndex,
pmEthOamName,
pmEthOamSubrack,
pmEthOamSlot,
pmEthOamPort,
pmEthOamPmReportMode,
pmEthOamRxPort,
pmEthOamReset15Min,
pmEthOamReset24H,
pmEthOamAdminStatus,
pmEthOamOperStatus,
pmEthOamIsSuspect15Min,
pmEthOamIsSuspect24h,
pmEthOamCurrentTwoWayFrameDelay,
pmEthOamCurrentTwoWayFrameDelayVariation,
pmEthOamCurrentFrameLossRatioNearEnd,
pmEthOamCurrentFrameLossRatioFarEnd,
pmEthOamCurrentUnavailabilityNearEnd,
pmEthOamCurrentUnavailabilityFarEnd,
pmEthOamCurrent24hTwoWayFrameDelay,
pmEthOamCurrent24hTwoWayFrameDelayVariation,
pmEthOamCurrent24hFrameLossRatioNearEnd,
pmEthOamCurrent24hFrameLossRatioFarEnd,
pmEthOamCurrent24hUnavailabilityNearEnd,
pmEthOamCurrent24hUnavailabilityFarEnd,
pmEthOamObjectProperty,
pmEthOamInternalReference,
pmEthOamIdentifier,
pmEthOamUsedPercentOfFrames,
pmEthOamFrameLossRatioUnavailableThreshold,
pmEthOamCurrentOneWayFrameDelayVariation,
pmEthOamCurrent24hOneWayFrameDelayVariation }
STATUS current
DESCRIPTION
"The Ethernet OAM PM configuration and current meters objects V1 (11.0)."
::= { lumPmGroups 43 }
pmGeneralGroupV4 OBJECT-GROUP
OBJECTS {
pmGeneralLastChangeTime,
pmGeneralStateLastChangeTime,
pmGeneralPmIfTableSize,
pmGeneralPmEthTdTableSize,
pmGeneralPmEthTmTableSize,
pmGeneralPmEthOamTableSize }
STATUS deprecated
DESCRIPTION
"The general objects. (11.0)"
::= { lumPmGroups 44 }
pmEthTdGroupV2 OBJECT-GROUP
OBJECTS {
pmEthTdIndex,
pmEthTdName,
pmEthTdSubrack,
pmEthTdSlot,
pmEthTdPort,
pmEthTdPmReportMode,
pmEthTdRxPort,
pmEthTdReset15Min,
pmEthTdReset24H,
pmEthTdAdminStatus,
pmEthTdOperStatus,
pmEthTdIsSuspect15Min,
pmEthTdIsSuspect24h,
pmEthTdCurrentRxUndersizedFrames,
pmEthTdCurrentRxOversizedFrames,
pmEthTdCurrentRxFragments,
pmEthTdCurrentRxFcsErrors,
pmEthTdCurrentRxInvalidCeVlanId,
pmEthTdCurrentTxOctets,
pmEthTdCurrentTxFrames,
pmEthTdCurrentTxUnicastFrames,
pmEthTdCurrentTxMulticastFrames,
pmEthTdCurrentTxBroadcastFrames,
pmEthTdCurrentRxOctets,
pmEthTdCurrentRxFrames,
pmEthTdCurrentRxUnicastFrames,
pmEthTdCurrentRxMulticastFrames,
pmEthTdCurrentRxBroadcastFrames,
pmEthTdCurrentTxEthMaxUtilization,
pmEthTdCurrentRxEthMaxUtilization,
pmEthTdCurrent24hRxUndersizedFrames,
pmEthTdCurrent24hRxOversizedFrames,
pmEthTdCurrent24hRxFragments,
pmEthTdCurrent24hRxFcsErrors,
pmEthTdCurrent24hRxInvalidCeVlanId,
pmEthTdCurrent24hTxOctets,
pmEthTdCurrent24hTxFrames,
pmEthTdCurrent24hTxUnicastFrames,
pmEthTdCurrent24hTxMulticastFrames,
pmEthTdCurrent24hTxBroadcastFrames,
pmEthTdCurrent24hRxOctets,
pmEthTdCurrent24hRxFrames,
pmEthTdCurrent24hRxUnicastFrames,
pmEthTdCurrent24hRxMulticastFrames,
pmEthTdCurrent24hRxBroadcastFrames,
pmEthTdCurrent24hTxEthMaxUtilization,
pmEthTdCurrent24hRxEthMaxUtilization,
pmEthTdObjectProperty,
pmEthTdRxUndersizedFramesThreshold,
pmEthTdRxOversizedFramesThreshold,
pmEthTdRxFragmentsThreshold,
pmEthTdRxFcsErrorsThreshold,
pmEthTdRxInvalidCeVlanIdThreshold,
pmEthTd24hRxUndersizedFramesThreshold,
pmEthTd24hRxOversizedFramesThreshold,
pmEthTd24hRxFragmentsThreshold,
pmEthTd24hRxFcsErrorsThreshold,
pmEthTd24hRxInvalidCeVlanIdThreshold,
pmEthTdRxUndersizedFrames,
pmEthTdRxOversizedFrames,
pmEthTdRxFragments,
pmEthTdRxFcsErrors,
pmEthTdRxInvalidCeVlanId,
pmEthTd24hRxUndersizedFrames,
pmEthTd24hRxOversizedFrames,
pmEthTd24hRxFragments,
pmEthTd24hRxFcsErrors,
pmEthTd24hRxInvalidCeVlanId }
STATUS deprecated
DESCRIPTION
"The Ethernet Traffic Data PM configuration and current meters objects V1 (12.0)."
::= { lumPmGroups 45 }
pmIntervalGroupV7 OBJECT-GROUP
OBJECTS {
pmIntervalSubrack,
pmIntervalSlot,
pmIntervalPort,
pmIntervalNumber,
pmIntervalIsSuspect,
pmIntervalRxES,
pmIntervalRxSES,
pmIntervalRxBBE,
pmIntervalRxUAS,
pmIntervalTxES,
pmIntervalTxSES,
pmIntervalTxBBE,
pmIntervalTxUAS,
pmIntervalName,
pmIntervalRxPowerLevel,
pmIntervalGbeMaxUtilization,
pmIntervalTxPowerLevel,
pmIntervalTxEthMaxUtilization,
pmIntervalRxEthMaxUtilization }
STATUS deprecated
DESCRIPTION
"The 15 minute interval objects V7. (12.0)"
::= { lumPmGroups 46 }
pmInterval24hGroupV7 OBJECT-GROUP
OBJECTS {
pmInterval24hSubrack,
pmInterval24hSlot,
pmInterval24hPort,
pmInterval24hNumber,
pmInterval24hIsSuspect,
pmInterval24hRxES,
pmInterval24hRxSES,
pmInterval24hRxBBE,
pmInterval24hRxUAS,
pmInterval24hTxES,
pmInterval24hTxSES,
pmInterval24hTxBBE,
pmInterval24hTxUAS,
pmInterval24hName,
pmInterval24hRxPowerLevel,
pmInterval24hGbeMaxUtilization,
pmInterval24hTxPowerLevel,
pmInterval24hTxEthMaxUtilization,
pmInterval24hRxEthMaxUtilization }
STATUS deprecated
DESCRIPTION
"The 24 hour interval objects V7. (12.0)"
::= { lumPmGroups 47 }
pmIntervalGroupV8 OBJECT-GROUP
OBJECTS {
pmIntervalSubrack,
pmIntervalSlot,
pmIntervalPort,
pmIntervalNumber,
pmIntervalIsSuspect,
pmIntervalRxES,
pmIntervalRxSES,
pmIntervalRxBBE,
pmIntervalRxUAS,
pmIntervalTxES,
pmIntervalTxSES,
pmIntervalTxBBE,
pmIntervalTxUAS,
pmIntervalName,
pmIntervalRxPowerLevel,
pmIntervalGbeMaxUtilization,
pmIntervalTxPowerLevel,
pmIntervalTxEthMaxUtilization,
pmIntervalRxEthMaxUtilization,
pmIntervalStartTime,
pmIntervalStopTime }
STATUS deprecated
DESCRIPTION
"The 15 minute interval objects V8. (13.0)"
::= { lumPmGroups 48 }
pmInterval24hGroupV8 OBJECT-GROUP
OBJECTS {
pmInterval24hSubrack,
pmInterval24hSlot,
pmInterval24hPort,
pmInterval24hNumber,
pmInterval24hIsSuspect,
pmInterval24hRxES,
pmInterval24hRxSES,
pmInterval24hRxBBE,
pmInterval24hRxUAS,
pmInterval24hTxES,
pmInterval24hTxSES,
pmInterval24hTxBBE,
pmInterval24hTxUAS,
pmInterval24hName,
pmInterval24hRxPowerLevel,
pmInterval24hGbeMaxUtilization,
pmInterval24hTxPowerLevel,
pmInterval24hTxEthMaxUtilization,
pmInterval24hRxEthMaxUtilization,
pmInterval24hStartTime,
pmInterval24hStopTime }
STATUS deprecated
DESCRIPTION
"The 24 hour interval objects V8. (13.0)"
::= { lumPmGroups 49 }
pmIfGroupV10 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort,
pmIfReset15Min,
pmIfReset24H,
pmIfAdminStatus,
pmIfOperStatus,
pmIfIsSuspect15Min,
pmIfIsSuspect24H,
pmIfInstallCommand,
pmIfRxPowerLevel,
pmIfInitialPowerLevel,
pmIfRxGbeMaxUtilization,
pmIfRx24hGbeMaxUtilization,
pmIfTxPowerLevel,
pmIfObjectProperty,
pmIfDelay }
STATUS deprecated
DESCRIPTION
"The pm interface configuration and current meters objects V10 (15.0)."
::= { lumPmGroups 50 }
pmIfGroupV11 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort,
pmIfReset15Min,
pmIfReset24H,
pmIfAdminStatus,
pmIfOperStatus,
pmIfIsSuspect15Min,
pmIfIsSuspect24H,
pmIfInstallCommand,
pmIfRxPowerLevel,
pmIfInitialPowerLevel,
pmIfRxGbeMaxUtilization,
pmIfRx24hGbeMaxUtilization,
pmIfTxPowerLevel,
pmIfObjectProperty,
pmIfDelay,
pmIfRxBEREstimation }
STATUS deprecated
DESCRIPTION
"The pm interface configuration and current meters objects V11 (16.0)."
::= { lumPmGroups 51 }
pmEthTdGroupV3 OBJECT-GROUP
OBJECTS {
pmEthTdIndex,
pmEthTdName,
pmEthTdSubrack,
pmEthTdSlot,
pmEthTdPort,
pmEthTdPmReportMode,
pmEthTdRxPort,
pmEthTdReset15Min,
pmEthTdReset24H,
pmEthTdAdminStatus,
pmEthTdOperStatus,
pmEthTdIsSuspect15Min,
pmEthTdIsSuspect24h,
pmEthTdCurrentRxUndersizedFrames,
pmEthTdCurrentRxOversizedFrames,
pmEthTdCurrentRxFragments,
pmEthTdCurrentRxFcsErrors,
pmEthTdCurrentRxInvalidCeVlanId,
pmEthTdCurrentTxOctets,
pmEthTdCurrentTxFrames,
pmEthTdCurrentTxUnicastFrames,
pmEthTdCurrentTxMulticastFrames,
pmEthTdCurrentTxBroadcastFrames,
pmEthTdCurrentRxOctets,
pmEthTdCurrentRxFrames,
pmEthTdCurrentRxUnicastFrames,
pmEthTdCurrentRxMulticastFrames,
pmEthTdCurrentRxBroadcastFrames,
pmEthTdCurrentTxEthMaxUtilization,
pmEthTdCurrentRxEthMaxUtilization,
pmEthTdCurrent24hRxUndersizedFrames,
pmEthTdCurrent24hRxOversizedFrames,
pmEthTdCurrent24hRxFragments,
pmEthTdCurrent24hRxFcsErrors,
pmEthTdCurrent24hRxInvalidCeVlanId,
pmEthTdCurrent24hTxOctets,
pmEthTdCurrent24hTxFrames,
pmEthTdCurrent24hTxUnicastFrames,
pmEthTdCurrent24hTxMulticastFrames,
pmEthTdCurrent24hTxBroadcastFrames,
pmEthTdCurrent24hRxOctets,
pmEthTdCurrent24hRxFrames,
pmEthTdCurrent24hRxUnicastFrames,
pmEthTdCurrent24hRxMulticastFrames,
pmEthTdCurrent24hRxBroadcastFrames,
pmEthTdCurrent24hTxEthMaxUtilization,
pmEthTdCurrent24hRxEthMaxUtilization,
pmEthTdObjectProperty,
pmEthTdRxUndersizedFramesThreshold,
pmEthTdRxOversizedFramesThreshold,
pmEthTdRxFragmentsThreshold,
pmEthTdRxFcsErrorsThreshold,
pmEthTdRxInvalidCeVlanIdThreshold,
pmEthTd24hRxUndersizedFramesThreshold,
pmEthTd24hRxOversizedFramesThreshold,
pmEthTd24hRxFragmentsThreshold,
pmEthTd24hRxFcsErrorsThreshold,
pmEthTd24hRxInvalidCeVlanIdThreshold,
pmEthTdRxUndersizedFrames,
pmEthTdRxOversizedFrames,
pmEthTdRxFragments,
pmEthTdRxFcsErrors,
pmEthTdRxInvalidCeVlanId,
pmEthTd24hRxUndersizedFrames,
pmEthTd24hRxOversizedFrames,
pmEthTd24hRxFragments,
pmEthTd24hRxFcsErrors,
pmEthTd24hRxInvalidCeVlanId,
pmEthTdResetCont,
pmEthTdCurrentContRxUndersizedFrames,
pmEthTdCurrentContRxOversizedFrames,
pmEthTdCurrentContRxFragments,
pmEthTdCurrentContRxFcsErrors,
pmEthTdCurrentContRxInvalidCeVlanId,
pmEthTdCurrentContTxOctets,
pmEthTdCurrentContTxFrames,
pmEthTdCurrentContTxUnicastFrames,
pmEthTdCurrentContTxMulticastFrames,
pmEthTdCurrentContTxBroadcastFrames,
pmEthTdCurrentContRxOctets,
pmEthTdCurrentContRxFrames,
pmEthTdCurrentContRxUnicastFrames,
pmEthTdCurrentContRxMulticastFrames,
pmEthTdCurrentContRxBroadcastFrames }
STATUS deprecated
DESCRIPTION
"The Ethernet Traffic Data PM configuration and current meters objects V3 (16.0)."
::= { lumPmGroups 52 }
pmControlGroupV2 OBJECT-GROUP
OBJECTS {
pmControlReset15Min,
pmControlReset24H,
pmControlResetCont }
STATUS current
DESCRIPTION
"The control group (16.0)."
::= { lumPmGroups 53 }
pmEthDropGroup OBJECT-GROUP
OBJECTS {
pmEthDropIndex,
pmEthDropName,
pmEthDropSubrack,
pmEthDropSlot,
pmEthDropPort,
pmEthDropRxPort,
pmEthDropResetCont,
pmEthDropFrames,
pmEthDropBytes,
pmEthDropYellowFrames,
pmEthDropRedFrames,
pmEthDropFramesQ1,
pmEthDropBytesQ1,
pmEthDropFramesQ2,
pmEthDropBytesQ2,
pmEthDropFramesQ3,
pmEthDropBytesQ3,
pmEthDropFramesQ4,
pmEthDropBytesQ4,
pmEthDropFramesQ5,
pmEthDropBytesQ5,
pmEthDropFramesQ6,
pmEthDropBytesQ6,
pmEthDropFramesQ7,
pmEthDropBytesQ7,
pmEthDropFramesQ8,
pmEthDropBytesQ8 }
STATUS deprecated
DESCRIPTION
"The Ethernet drop counters configuration and current meters objects (16.0)."
::= { lumPmGroups 54 }
pmEthClassificationGroup OBJECT-GROUP
OBJECTS {
pmEthClassificationIndex,
pmEthClassificationName,
pmEthClassificationSubrack,
pmEthClassificationSlot,
pmEthClassificationIdentifier,
pmEthClassificationResetCont,
pmEthClassificationInternalReference,
pmEthClassificationCounter1,
pmEthClassificationCounter2 }
STATUS current
DESCRIPTION
"The Ethernet classification counters configuration and current meters objects (16.0)."
::= { lumPmGroups 55 }
pmLogGeneralGroupV5 OBJECT-GROUP
OBJECTS {
pmLogGeneralLastChangeTime,
pmLogGeneralSize,
pmLogGeneralSize24h,
pmLogGeneralFileTableSize,
pmLogGeneralFile24hTableSize,
pmLogGeneralFile15mLastSeqNumber,
pmLogGeneralFile24hLastSeqNumber }
STATUS current
DESCRIPTION
"The general log object v5 (18.0)."
::= { lumPmGroups 56 }
pmEthClassificationGroupV2 OBJECT-GROUP
OBJECTS {
pmEthClassificationIndex,
pmEthClassificationName,
pmEthClassificationSubrack,
pmEthClassificationSlot,
pmEthClassificationIdentifier,
pmEthClassificationResetCont,
pmEthClassificationInternalReference,
pmEthClassificationCounter1,
pmEthClassificationCounter2,
pmEthClassificationCounter3,
pmEthClassificationCounter4 }
STATUS current
DESCRIPTION
"The Ethernet classification counters configuration and current meters objects V2 (18.0)."
::= { lumPmGroups 57 }
pmEthTdGroupV4 OBJECT-GROUP
OBJECTS {
pmEthTdIndex,
pmEthTdName,
pmEthTdSubrack,
pmEthTdSlot,
pmEthTdPort,
pmEthTdPmReportMode,
pmEthTdRxPort,
pmEthTdReset15Min,
pmEthTdReset24H,
pmEthTdAdminStatus,
pmEthTdOperStatus,
pmEthTdIsSuspect15Min,
pmEthTdIsSuspect24h,
pmEthTdCurrentRxUndersizedFrames,
pmEthTdCurrentRxOversizedFrames,
pmEthTdCurrentRxFragments,
pmEthTdCurrentRxFcsErrors,
pmEthTdCurrentRxInvalidCeVlanId,
pmEthTdCurrentTxOctets,
pmEthTdCurrentTxFrames,
pmEthTdCurrentTxUnicastFrames,
pmEthTdCurrentTxMulticastFrames,
pmEthTdCurrentTxBroadcastFrames,
pmEthTdCurrentRxOctets,
pmEthTdCurrentRxFrames,
pmEthTdCurrentRxUnicastFrames,
pmEthTdCurrentRxMulticastFrames,
pmEthTdCurrentRxBroadcastFrames,
pmEthTdCurrentTxEthMaxUtilization,
pmEthTdCurrentRxEthMaxUtilization,
pmEthTdCurrent24hRxUndersizedFrames,
pmEthTdCurrent24hRxOversizedFrames,
pmEthTdCurrent24hRxFragments,
pmEthTdCurrent24hRxFcsErrors,
pmEthTdCurrent24hRxInvalidCeVlanId,
pmEthTdCurrent24hTxOctets,
pmEthTdCurrent24hTxFrames,
pmEthTdCurrent24hTxUnicastFrames,
pmEthTdCurrent24hTxMulticastFrames,
pmEthTdCurrent24hTxBroadcastFrames,
pmEthTdCurrent24hRxOctets,
pmEthTdCurrent24hRxFrames,
pmEthTdCurrent24hRxUnicastFrames,
pmEthTdCurrent24hRxMulticastFrames,
pmEthTdCurrent24hRxBroadcastFrames,
pmEthTdCurrent24hTxEthMaxUtilization,
pmEthTdCurrent24hRxEthMaxUtilization,
pmEthTdObjectProperty,
pmEthTdRxUndersizedFramesThreshold,
pmEthTdRxOversizedFramesThreshold,
pmEthTdRxFragmentsThreshold,
pmEthTdRxFcsErrorsThreshold,
pmEthTdRxInvalidCeVlanIdThreshold,
pmEthTd24hRxUndersizedFramesThreshold,
pmEthTd24hRxOversizedFramesThreshold,
pmEthTd24hRxFragmentsThreshold,
pmEthTd24hRxFcsErrorsThreshold,
pmEthTd24hRxInvalidCeVlanIdThreshold,
pmEthTdRxUndersizedFrames,
pmEthTdRxOversizedFrames,
pmEthTdRxFragments,
pmEthTdRxFcsErrors,
pmEthTdRxInvalidCeVlanId,
pmEthTd24hRxUndersizedFrames,
pmEthTd24hRxOversizedFrames,
pmEthTd24hRxFragments,
pmEthTd24hRxFcsErrors,
pmEthTd24hRxInvalidCeVlanId,
pmEthTdResetCont,
pmEthTdCurrentContRxUndersizedFrames,
pmEthTdCurrentContRxOversizedFrames,
pmEthTdCurrentContRxFragments,
pmEthTdCurrentContRxFcsErrors,
pmEthTdCurrentContRxInvalidCeVlanId,
pmEthTdCurrentContTxOctets,
pmEthTdCurrentContTxFrames,
pmEthTdCurrentContTxUnicastFrames,
pmEthTdCurrentContTxMulticastFrames,
pmEthTdCurrentContTxBroadcastFrames,
pmEthTdCurrentContRxOctets,
pmEthTdCurrentContRxFrames,
pmEthTdCurrentContRxUnicastFrames,
pmEthTdCurrentContRxMulticastFrames,
pmEthTdCurrentContRxBroadcastFrames,
pmEthTdVlanId
}
STATUS deprecated
DESCRIPTION
"The Ethernet Traffic Data PM configuration and current meters objects V4 (R21 ??)."
::= { lumPmGroups 58 }
pmEthTdGroupV5 OBJECT-GROUP
OBJECTS {
pmEthTdIndex,
pmEthTdName,
pmEthTdSubrack,
pmEthTdSlot,
pmEthTdPort,
pmEthTdPmReportMode,
pmEthTdRxPort,
pmEthTdReset15Min,
pmEthTdReset24H,
pmEthTdAdminStatus,
pmEthTdOperStatus,
pmEthTdIsSuspect15Min,
pmEthTdIsSuspect24h,
pmEthTdCurrentRxUndersizedFrames,
pmEthTdCurrentRxOversizedFrames,
pmEthTdCurrentRxFragments,
pmEthTdCurrentRxFcsErrors,
pmEthTdCurrentRxInvalidCeVlanId,
pmEthTdCurrentTxOctets,
pmEthTdCurrentTxFrames,
pmEthTdCurrentTxUnicastFrames,
pmEthTdCurrentTxMulticastFrames,
pmEthTdCurrentTxBroadcastFrames,
pmEthTdCurrentRxOctets,
pmEthTdCurrentRxFrames,
pmEthTdCurrentRxUnicastFrames,
pmEthTdCurrentRxMulticastFrames,
pmEthTdCurrentRxBroadcastFrames,
pmEthTdCurrentTxEthMaxUtilization,
pmEthTdCurrentRxEthMaxUtilization,
pmEthTdCurrent24hRxUndersizedFrames,
pmEthTdCurrent24hRxOversizedFrames,
pmEthTdCurrent24hRxFragments,
pmEthTdCurrent24hRxFcsErrors,
pmEthTdCurrent24hRxInvalidCeVlanId,
pmEthTdCurrent24hTxOctets,
pmEthTdCurrent24hTxFrames,
pmEthTdCurrent24hTxUnicastFrames,
pmEthTdCurrent24hTxMulticastFrames,
pmEthTdCurrent24hTxBroadcastFrames,
pmEthTdCurrent24hRxOctets,
pmEthTdCurrent24hRxFrames,
pmEthTdCurrent24hRxUnicastFrames,
pmEthTdCurrent24hRxMulticastFrames,
pmEthTdCurrent24hRxBroadcastFrames,
pmEthTdCurrent24hTxEthMaxUtilization,
pmEthTdCurrent24hRxEthMaxUtilization,
pmEthTdObjectProperty,
pmEthTdRxUndersizedFramesThreshold,
pmEthTdRxOversizedFramesThreshold,
pmEthTdRxFragmentsThreshold,
pmEthTdRxFcsErrorsThreshold,
pmEthTdRxInvalidCeVlanIdThreshold,
pmEthTd24hRxUndersizedFramesThreshold,
pmEthTd24hRxOversizedFramesThreshold,
pmEthTd24hRxFragmentsThreshold,
pmEthTd24hRxFcsErrorsThreshold,
pmEthTd24hRxInvalidCeVlanIdThreshold,
pmEthTdRxUndersizedFrames,
pmEthTdRxOversizedFrames,
pmEthTdRxFragments,
pmEthTdRxFcsErrors,
pmEthTdRxInvalidCeVlanId,
pmEthTd24hRxUndersizedFrames,
pmEthTd24hRxOversizedFrames,
pmEthTd24hRxFragments,
pmEthTd24hRxFcsErrors,
pmEthTd24hRxInvalidCeVlanId,
pmEthTdResetCont,
pmEthTdCurrentContRxUndersizedFrames,
pmEthTdCurrentContRxOversizedFrames,
pmEthTdCurrentContRxFragments,
pmEthTdCurrentContRxFcsErrors,
pmEthTdCurrentContRxInvalidCeVlanId,
pmEthTdCurrentContTxOctets,
pmEthTdCurrentContTxFrames,
pmEthTdCurrentContTxUnicastFrames,
pmEthTdCurrentContTxMulticastFrames,
pmEthTdCurrentContTxBroadcastFrames,
pmEthTdCurrentContRxOctets,
pmEthTdCurrentContRxFrames,
pmEthTdCurrentContRxUnicastFrames,
pmEthTdCurrentContRxMulticastFrames,
pmEthTdCurrentContRxBroadcastFrames,
pmEthTdVlanId,
pmEthTdIfNo,
pmEthTdUpPortId
}
STATUS current
DESCRIPTION
"The Ethernet Traffic Data PM configuration and current meters objects V5 (R26.1)."
::= { lumPmGroups 59 }
pmIfGroupV12 OBJECT-GROUP
OBJECTS {
pmIfIndex,
pmIfName,
pmIfSubrack,
pmIfSlot,
pmIfPort,
pmIfPmReportMode,
pmIfRxCurrentES,
pmIfRxCurrentSES,
pmIfRxCurrentBBE,
pmIfRxCurrentUAS,
pmIfTxCurrentES,
pmIfTxCurrentSES,
pmIfTxCurrentBBE,
pmIfTxCurrentUAS,
pmIfRx24hCurrentES,
pmIfRx24hCurrentSES,
pmIfRx24hCurrentBBE,
pmIfRx24hCurrentUAS,
pmIfTx24hCurrentES,
pmIfTx24hCurrentSES,
pmIfTx24hCurrentBBE,
pmIfTx24hCurrentUAS,
pmIfRxESThreshold,
pmIfRxSESThreshold,
pmIfRxBBEThreshold,
pmIfRxUASThreshold,
pmIfTxESThreshold,
pmIfTxSESThreshold,
pmIfTxBBEThreshold,
pmIfTxUASThreshold,
pmIfRx24hESThreshold,
pmIfRx24hSESThreshold,
pmIfRx24hBBEThreshold,
pmIfRx24hUASThreshold,
pmIfTx24hESThreshold,
pmIfTx24hSESThreshold,
pmIfTx24hBBEThreshold,
pmIfTx24hUASThreshold,
pmIfRxES,
pmIfRxSES,
pmIfRxBBE,
pmIfRxUAS,
pmIfTxES,
pmIfTxSES,
pmIfTxBBE,
pmIfTxUAS,
pmIfRx24hES,
pmIfRx24hSES,
pmIfRx24hBBE,
pmIfRx24hUAS,
pmIfTx24hES,
pmIfTx24hSES,
pmIfTx24hBBE,
pmIfTx24hUAS,
pmIfRxPort,
pmIfReset15Min,
pmIfReset24H,
pmIfAdminStatus,
pmIfOperStatus,
pmIfIsSuspect15Min,
pmIfIsSuspect24H,
pmIfInstallCommand,
pmIfRxPowerLevel,
pmIfInitialPowerLevel,
pmIfRxGbeMaxUtilization,
pmIfRx24hGbeMaxUtilization,
pmIfTxPowerLevel,
pmIfObjectProperty,
pmIfDelay,
pmIfRxBEREstimation,
pmIfIfNo,
pmIfUpPortId
}
STATUS current
DESCRIPTION
"The pm interface configuration and current meters objects V12 (R26.1)."
::= { lumPmGroups 60 }
pmGeneralGroupV5 OBJECT-GROUP
OBJECTS {
pmGeneralLastChangeTime,
pmGeneralStateLastChangeTime,
pmGeneralPmIfTableSize,
pmGeneralPmEthTdTableSize,
pmGeneralPmEthTmTableSize,
pmGeneralPmEthOamTableSize,
pmGeneralPmMpoLanesTableSize
}
STATUS current
DESCRIPTION
"The general objects. (27.0)"
::= { lumPmGroups 61 }
pmEthDropGroupV2 OBJECT-GROUP
OBJECTS {
pmEthDropIndex,
pmEthDropName,
pmEthDropSubrack,
pmEthDropSlot,
pmEthDropPort,
pmEthDropRxPort,
pmEthDropResetCont,
pmEthDropFrames,
pmEthDropBytes,
pmEthDropYellowFrames,
pmEthDropRedFrames,
pmEthDropFramesQ1,
pmEthDropBytesQ1,
pmEthDropFramesQ2,
pmEthDropBytesQ2,
pmEthDropFramesQ3,
pmEthDropBytesQ3,
pmEthDropFramesQ4,
pmEthDropBytesQ4,
pmEthDropFramesQ5,
pmEthDropBytesQ5,
pmEthDropFramesQ6,
pmEthDropBytesQ6,
pmEthDropFramesQ7,
pmEthDropBytesQ7,
pmEthDropFramesQ8,
pmEthDropBytesQ8,
pmEthDropIfNo,
pmEthDropUpPortId }
STATUS deprecated
DESCRIPTION
"The Ethernet drop counters configuration and current meters objects (27.0)."
::= { lumPmGroups 62 }
pmEthDropGroupV3 OBJECT-GROUP
OBJECTS {
pmEthDropIndex,
pmEthDropName,
pmEthDropSubrack,
pmEthDropSlot,
pmEthDropPort,
pmEthDropRxPort,
pmEthDropResetCont,
pmEthDropFrames,
pmEthDropBytes,
pmEthDropYellowFrames,
pmEthDropRedFrames,
pmEthDropFramesQ1,
pmEthDropBytesQ1,
pmEthDropFramesQ2,
pmEthDropBytesQ2,
pmEthDropFramesQ3,
pmEthDropBytesQ3,
pmEthDropFramesQ4,
pmEthDropBytesQ4,
pmEthDropFramesQ5,
pmEthDropBytesQ5,
pmEthDropFramesQ6,
pmEthDropBytesQ6,
pmEthDropFramesQ7,
pmEthDropBytesQ7,
pmEthDropFramesQ8,
pmEthDropBytesQ8,
pmEthDropIfNo,
pmEthDropUpPortId,
pmEthDropReset15m,
pmEthDropReset24h,
pmEthDropReportMode,
pmEthDropIsSuspect15Min,
pmEthDropIsSuspect24H}
STATUS current
DESCRIPTION
"The Ethernet drop counters configuration and current meters objects (32.0)."
::= { lumPmGroups 63 }
pmEthEgressGroup OBJECT-GROUP
OBJECTS {
pmEthEgressIndex,
pmEthEgressName,
pmEthEgressSubrack,
pmEthEgressSlot,
pmEthEgressPort,
pmEthEgressFramesQ1,
pmEthEgressBytesQ1,
pmEthEgressBandwidthQ1,
pmEthEgressFrames15mQ1,
pmEthEgressBytes15mQ1,
pmEthEgressFrames24hQ1,
pmEthEgressBytes24hQ1,
pmEthEgressFramesQ2,
pmEthEgressBytesQ2,
pmEthEgressBandwidthQ2,
pmEthEgressFrames15mQ2,
pmEthEgressBytes15mQ2,
pmEthEgressFrames24hQ2,
pmEthEgressBytes24hQ2,
pmEthEgressFramesQ3,
pmEthEgressBytesQ3,
pmEthEgressBandwidthQ3,
pmEthEgressFrames15mQ3,
pmEthEgressBytes15mQ3,
pmEthEgressFrames24hQ3,
pmEthEgressBytes24hQ3,
pmEthEgressFramesQ4,
pmEthEgressBytesQ4,
pmEthEgressBandwidthQ4,
pmEthEgressFrames15mQ4,
pmEthEgressBytes15mQ4,
pmEthEgressFrames24hQ4,
pmEthEgressBytes24hQ4,
pmEthEgressFramesQ5,
pmEthEgressBytesQ5,
pmEthEgressBandwidthQ5,
pmEthEgressFrames15mQ5,
pmEthEgressBytes15mQ5,
pmEthEgressFrames24hQ5,
pmEthEgressBytes24hQ5,
pmEthEgressFramesQ6,
pmEthEgressBytesQ6,
pmEthEgressBandwidthQ6,
pmEthEgressFrames15mQ6,
pmEthEgressBytes15mQ6,
pmEthEgressFrames24hQ6,
pmEthEgressBytes24hQ6,
pmEthEgressFramesQ7,
pmEthEgressBytesQ7,
pmEthEgressBandwidthQ7,
pmEthEgressFrames15mQ7,
pmEthEgressBytes15mQ7,
pmEthEgressFrames24hQ7,
pmEthEgressBytes24hQ7,
pmEthEgressFramesQ8,
pmEthEgressBytesQ8,
pmEthEgressBandwidthQ8,
pmEthEgressFrames15mQ8,
pmEthEgressBytes15mQ8,
pmEthEgressFrames24hQ8,
pmEthEgressBytes24hQ8,
pmEthEgressResetCont,
pmEthEgressReset15m,
pmEthEgressReset24h,
pmEthEgressReportMode,
pmEthEgressIsSuspect15Min,
pmEthEgressIsSuspect24H}
STATUS current
DESCRIPTION
"The Ethernet egress counters configuration and current meters objects (32.0)."
::= { lumPmGroups 64 }
-- ----------------------------------------------------
-- Compliance
-- ----------------------------------------------------
lumPmBasicComplV1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB."
MODULE
MANDATORY-GROUPS {
pmGeneralGroup,
pmIfGroup}
::= { lumPmCompl 1 }
lumPmBasicComplV2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V2."
MODULE
MANDATORY-GROUPS {
pmGeneralGroup,
pmIfGroupV2,
pmIntervalGroup,
pmInterval24hGroup,
pmLogGeneralGroup,
pmFileGroup,
pmFile24hGroup,
pmNotificationGroup }
::= { lumPmCompl 2 }
lumPmBasicComplV3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V3."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV2,
pmIfGroupV2,
pmIntervalGroup,
pmInterval24hGroup,
pmLogGeneralGroup,
pmFileGroup,
pmFile24hGroup,
pmNotificationGroup }
::= { lumPmCompl 3 }
lumPmBasicComplV4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V4."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV2,
pmIfGroupV3,
pmIntervalGroup,
pmInterval24hGroup,
pmLogGeneralGroup,
pmFileGroup,
pmFile24hGroup,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 4 }
lumPmBasicComplV5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V5."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV2,
pmIfGroupV3,
pmIntervalGroup,
pmInterval24hGroup,
pmLogGeneralGroup,
pmFileGroupV2,
pmFile24hGroupV2,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 5 }
lumPmBasicComplV6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V6."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV2,
pmIfGroupV4,
pmIntervalGroup,
pmInterval24hGroup,
pmLogGeneralGroup,
pmFileGroupV2,
pmFile24hGroupV2,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 6 }
lumPmBasicComplV7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V7."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV2,
pmIfGroupV5,
pmIntervalGroup,
pmInterval24hGroup,
pmLogGeneralGroup,
pmFileGroupV3,
pmFile24hGroupV3,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 7 }
lumPmBasicComplV8 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V8."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV2,
pmIfGroupV5,
pmIntervalGroup,
pmInterval24hGroup,
pmLogGeneralGroup,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 8 }
lumPmBasicComplV9 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V9 (3.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV2,
pmIfGroupV6,
pmIntervalGroupV2,
pmInterval24hGroupV2,
pmLogGeneralGroup,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 9 }
lumPmBasicComplV10 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V10 (3.1)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV3,
pmIfGroupV7,
pmIntervalGroupV3,
pmInterval24hGroupV3,
pmLogGeneralGroupV2,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 10 }
lumPmBasicComplV11 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V11 (3.2)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV3,
pmIfGroupV7,
pmIntervalGroupV4,
pmInterval24hGroupV4,
pmLogGeneralGroupV3,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 11 }
lumPmBasicComplV12 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V12 (6.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV3,
pmIfGroupV8,
pmIntervalGroupV5,
pmInterval24hGroupV5,
pmLogGeneralGroupV3,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 12 }
lumPmBasicComplV13 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V13 (10.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV3,
pmIfGroupV8,
pmIntervalGroupV5,
pmInterval24hGroupV5,
pmLogGeneralGroupV4,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 13 }
lumPmBasicComplV14 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V14 (11.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV4,
pmIfGroupV9,
pmEthTdGroup,
pmEthTmGroup,
pmEthOamGroup,
pmIntervalGroupV5,
pmInterval24hGroupV5,
pmLogGeneralGroupV4,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 14 }
lumPmBasicComplV15 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V15 (12.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV4,
pmIfGroupV9,
pmEthTdGroupV2,
pmEthTmGroup,
pmEthOamGroup,
pmIntervalGroupV7,
pmInterval24hGroupV7,
pmLogGeneralGroupV4,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 15 }
lumPmBasicComplV16 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V16 (15.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV4,
pmIfGroupV10,
pmEthTdGroupV2,
pmEthTmGroup,
pmEthOamGroup,
pmIntervalGroupV7,
pmInterval24hGroupV7,
pmLogGeneralGroupV4,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroup }
::= { lumPmCompl 16 }
lumPmBasicComplV17 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V17 (16.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV4,
pmIfGroupV11,
pmEthTdGroupV3,
pmEthTmGroup,
pmEthOamGroup,
pmIntervalGroupV8,
pmInterval24hGroupV8,
pmLogGeneralGroupV4,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroupV2,
pmEthDropGroup,
pmEthClassificationGroup }
::= { lumPmCompl 17 }
lumPmBasicComplV18 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V18 (17.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV4,
pmIfGroupV11,
pmEthTdGroupV3,
-- pmEthTmGroup,
-- pmEthOamGroup,
-- pmIntervalGroupV8,
-- pmInterval24hGroupV8,
pmLogGeneralGroupV4,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroupV2,
pmEthDropGroup,
pmEthClassificationGroup }
::= { lumPmCompl 18 }
lumPmBasicComplV19 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V19 (17.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV4,
pmIfGroupV11,
pmEthTdGroupV3,
-- pmEthTmGroup,
-- pmEthOamGroup,
-- pmIntervalGroupV8,
-- pmInterval24hGroupV8,
pmLogGeneralGroupV5,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroupV2,
pmEthDropGroup,
pmEthClassificationGroup }
::= { lumPmCompl 19 }
lumPmBasicComplV20 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V20 (18.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV4,
pmIfGroupV11,
pmEthTdGroupV3,
-- pmEthTmGroup,
-- pmEthOamGroup,
-- pmIntervalGroupV8,
-- pmInterval24hGroupV8,
pmLogGeneralGroupV5,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroupV2,
pmEthDropGroup,
pmEthClassificationGroupV2 }
::= { lumPmCompl 20 }
lumPmBasicComplV21 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V21 (R21.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV4,
pmIfGroupV11,
pmEthTdGroupV4,
-- pmEthTmGroup,
-- pmEthOamGroup,
-- pmIntervalGroupV8,
-- pmInterval24hGroupV8,
pmLogGeneralGroupV5,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroupV2,
pmEthDropGroup,
pmEthClassificationGroupV2 }
::= { lumPmCompl 21 }
lumPmBasicComplV22 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V22 (R26.1)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV4,
pmIfGroupV11,
pmEthTdGroupV5,
-- pmEthTmGroup,
-- pmEthOamGroup,
-- pmIntervalGroupV8,
-- pmInterval24hGroupV8,
pmLogGeneralGroupV5,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroupV2,
pmEthDropGroup,
pmEthClassificationGroupV2 }
::= { lumPmCompl 22 }
lumPmBasicComplV23 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the PM MIB V23 (R27.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV5,
pmIfGroupV11,
pmEthTdGroupV5,
-- pmEthTmGroup,
-- pmEthOamGroup,
-- pmIntervalGroupV8,
-- pmInterval24hGroupV8,
pmLogGeneralGroupV5,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroupV2,
pmEthDropGroupV2,
pmEthClassificationGroupV2 }
::= { lumPmCompl 23 }
lumPmBasicComplV24 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Basic implementation requirements for the PM MIB V24 (R32.0)."
MODULE
MANDATORY-GROUPS {
pmGeneralGroupV5,
pmIfGroupV11,
pmEthTdGroupV5,
-- pmEthTmGroup,
-- pmEthOamGroup,
-- pmIntervalGroupV8,
-- pmInterval24hGroupV8,
pmLogGeneralGroupV5,
pmFileGroupV4,
pmFile24hGroupV4,
pmNotificationGroup,
pmControlGroupV2,
pmEthDropGroupV3,
pmEthClassificationGroupV2,
pmEthEgressGroup }
::= { lumPmCompl 24 }
END