4463 lines
156 KiB
Plaintext
4463 lines
156 KiB
Plaintext
-- =============================================================================
|
|
-- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
|
|
--
|
|
-- Description:
|
|
-- The file defines a MIB to provide WLAN configuration information.
|
|
-- Reference:
|
|
-- Version: V3.3
|
|
-- History:
|
|
-- V1.0 2006-05-10 Initial version, created by shiyang (Richard)
|
|
-- V1.1 2007-02-01 modified by xingjichen(Daniel)
|
|
-- Added hpnicfDot11RadioIntfConfigTable,hpnicfDot11RadioIntfBindTable,
|
|
-- hpnicfDot11StaKeepALiveTimerIntvl,hpnicfDot11StaIdleTimerIntvl,
|
|
-- hpnicfDot11BroadcastProbeReply.
|
|
-- V1.2 2007-04-27 modified by shiyang(Richard)
|
|
-- Replace hpnicfDot11UnicastCipherKeyIndex, hpnicfDot11UnicastCipherKey,
|
|
-- hpnicfDot11BroadcastCipherKeyIndex and hpnicfDot11BroadcastCipherKey
|
|
-- with hpnicfDot11CipherKeyIndex, hpnicfDot11CipherKey as per CLI change.
|
|
-- Delete hpnicfDot11MaxTxLifetime as per CLI change.
|
|
-- Add hpnicfDot11GlobalCountryCode,hpnicfDot11APScanMode.
|
|
-- hpnicfDot11ACCtrlTunnelSecSupport and hpnicfDot11ACDataTunnelSecSupport.
|
|
-- Move hpnicfDot11StaKeepALiveTimerIntvl,hpnicfDot11StaIdleTimerIntvl
|
|
-- and so on to hpnicfDot11GlobeConfigGroup.
|
|
-- Split hpnicfDot11ServicePolicyTable into hpnicfDot11ServicePolicyTable
|
|
-- and hpnicfDot11ServicePolicyExtTable.
|
|
-- For hpnicfDot11SecurityCiphers node,update its description for case of
|
|
-- value equals to zero.
|
|
-- V1.3 2007-06-19 modified by Vikas K
|
|
-- Add new table of hpnicfDot11DataRateConfigTable for AP Configuration
|
|
-- Group.
|
|
-- Add new node of hpnicfDot11APName for hpnicfDot11APTemplateTable.
|
|
-- Modify the hpnicfDot11APScanMode from read-only to read-write.
|
|
-- Add undo functionality to node hpnicfDot11WlanInfBindingID and
|
|
-- hpnicfDot11Description.
|
|
-- Add hpnicfDot11StatisInterv to the hpnicfDot11APTemplateTable.
|
|
-- V1.4 2007-10-9 modified by Jagan K
|
|
-- Add new table hpnicfDot11WlanBssIfTable for WLAN BSS interface
|
|
-- configuration.
|
|
-- Add new table hpnicfDot11WlanEssIfTable for WLAN ESS interface
|
|
-- configuration.
|
|
-- Add new table hpnicfDot11WlanEthernetIfTable for WLAN Ethernet interface
|
|
-- configuration.
|
|
-- V1.5 2007-12-21 modified by wanghao (Kumar)
|
|
-- Add hpnicfDot11ACAutoAPSupport, hpnicfDot11AutoAPName,
|
|
-- hpnicfDot11PersistentName to hpnicfDot11GlobeConfigGroup
|
|
-- Add hpnicfDot11ClientMaxCount to hpnicfDot11ServicePolicyTable
|
|
-- Add hpnicfDot11APBroadcastProbeReply, hpnicfDot11StaIdleTimerInterv,
|
|
-- hpnicfDot11StaKeepAliveTimerInterv, hpnicfDot11APCir, hpnicfDot11APCbs
|
|
-- to hpnicfDot11APTemplateTable.
|
|
-- V1.6 2008-02-25 modified by wanghao (Kumar)
|
|
-- Add hpnicfDot11RdoClientMaxCount to hpnicfDot11RadioPolicyTable.
|
|
-- V1.7 2008-04-01 modified by wangbin
|
|
-- Add hpnicfDot11PortSecurityTable to hpnicfDot11InterfaceConfigGroup.
|
|
-- Add hpnicfDot11PortSecurityMode, hpnicfDot11SecurityUserLoginTxKeyType,
|
|
-- hpnicfDot11SecurityPskKeyMode, hpnicfDot11SecurityPskKeyString
|
|
-- to hpnicfDot11PortSecurityTable.
|
|
-- V1.8 2008-08-01 modified by ChangHuifeng
|
|
-- Add hpnicfDot11ACBackupGroup and
|
|
-- hpnicfDot11RadioElementConfigGroup.
|
|
-- Add hpnicfDot11WlanMeshIfTable to hpnicfDot11InterfaceConfigGroup.
|
|
-- Add hpnicfDot11APPriorityLevel and hpnicfDot11APElementID to
|
|
-- hpnicfDot11APTemplateTable.
|
|
-- Add hpnicfDot11CfgRdElementID to hpnicfDot11RadioToConfigTable.
|
|
-- Add hpnicfDot11APDevDetectEnable to hpnicfDot11APTemplateEntry.
|
|
-- Obsolete hpnicfDot11StatisInterv
|
|
-- Change default value of hpnicfDot11APScanMode to passive.
|
|
-- Change units of hpnicfDot11BeaconInterval and
|
|
-- hpnicfDot11RadioCfgBeaconIntvl to TU.
|
|
-- Remove default value of hpnicfDot11SSIDEncryptionMode.
|
|
-- Change MAC-ACCESS of objects in hpnicfDot11RadioToConfigTable
|
|
-- from read-create to read-write.
|
|
-- Change name of hpnicfDot11IWlanEssRowStatus to hpnicfDot11WlanEssRowStatus.
|
|
-- Change description of hpnicfDot11PortSecurityTable.
|
|
-- V1.9 2008-11-07 modified by Wang Lu and Li Yugang
|
|
-- Add hpnicfDot11IntfTrapThreshold to hpnicfDot11GlobeConfigGroup
|
|
-- Add hpnicfDot11SPInCirMode, hpnicfDot11SPInCirValue, hpnicfDot11SPOutCirMode,
|
|
-- hpnicfDot11SPOutCirValue to hpnicfDot11ServicePolicyTable
|
|
-- Add hpnicfDot11CfgWorkMode to hpnicfDot11RadioToConfigTable
|
|
-- Add hpnicfDot11RadioCfgWorkMode to hpnicfDot11RadioIntfConfigTable.
|
|
-- Add new traps hpnicfDot11CfgCipherChange and hpnicfDot11CfgPSKChange.
|
|
-- Add hpnicfDot11MonitorInterval, hpnicfDot11SampleInterval,
|
|
-- hpnicfDot11ChnlSwitChkInterval, hpnicfDot11APUserUplimit,
|
|
-- hpnicfDot11APL2IsolateEnable to hpnicfDot11GlobeConfigGroup.
|
|
-- Add hpnicfDot11RadioCfgOnly11gEnable to hpnicfDot11RadioIntfConfigTable.
|
|
-- Add hpnicfDot11RadioWDSTable to hpnicfDot11RadioElementConfigGroup.
|
|
-- V2.0 2009-03-20 modified by caizibin
|
|
-- Add value ext(6) to hpnicfDot11PortSecurityMode
|
|
-- V2.1 2009-05-07 modified by Li Yugang, Wang Shaojie, Jin Yi
|
|
-- Add hpnicfDot11APBSSIDSupportNum, hpnicfDot11APLastUpdateStatTime,
|
|
-- hpnicfDot11APDoSProtectEnable, hpnicfDot11MaxAPPerIf to
|
|
-- hpnicfDot11GlobeConfigGroup.
|
|
-- Add hpnicfDot11WlanInfPVID to hpnicfDot11ServicePolicyTable.
|
|
-- Add hpnicfDot11CipherKeyType to hpnicfDot11ServicePolicyExtTable.
|
|
-- Add hpnicfDot11CfgPwrAttValue to hpnicfDot11RadioToConfigTable.
|
|
-- Add new table hpnicfDot11APSysInfoSetTable to hpnicfDot11APConfigGroup.
|
|
-- Add hpnicfDot11SSIDWepIDConflictTrap to hpnicfDot11CfgNotifications.
|
|
-- Add new table hpnicfDot11CfgTrapVarObjects to hpnicfDot11CfgNotifyGroup.
|
|
-- V2.2 2009-07-29 modified by Heziqi
|
|
-- Add new node hpnicfDot11ServiceSetVlanId for hpnicfDot11APServiceSetTable.
|
|
-- Add hpnicfDot11UplinkTrackId to hpnicfDot11GlobeConfigGroup.
|
|
-- Add hpnicfDot11APLimitTable.
|
|
-- Change description of hpnicfDot11StaKeepALiveTimerIntvl.
|
|
-- Add new node hpnicfDot11RadioTxArithmetic for HpnicfDot11RadioToConfigTable.
|
|
-- V2.3 2009-07-29 modified by Jinyi
|
|
-- Add new table hpnicfDot11APIfSetTable
|
|
-- V2.4 2009-12-01 modified by Wang Shaojie
|
|
-- Add new node hpnicfDot11APGetIPMethod for hpnicfDot11APTemplateTable.
|
|
-- Add new group hpnicfDot11CfgTrapConfigGroup.
|
|
-- Add new table hpnicfDot11CfgSwitchTrapTable to hpnicfDot11CfgTrapConfigGroup.
|
|
-- Add new node hpnicfDot11BeaconIntervalMs to hpnicfDot11RadioPolicyTable.
|
|
-- Add new node hpnicfDot11SPInCirStaticValue, hpnicfDot11SPOutCirStaticValue
|
|
-- to hpnicfDot11ServicePolicyTable.
|
|
-- Modify description of hpnicfDot11SecurityCiphers.
|
|
-- Add new node hpnicfDot11StatisIntervMode to hpnicfDot11APTemplateTable.
|
|
-- Modify SYNTAX of hpnicfDot11APWorkMode.
|
|
-- Modify STATUS of hpnicfDot11StatisInterv.
|
|
-- Add new node hpnicfDot11SmartRateSet to hpnicfDot11DataRateConfigTable.
|
|
-- 2010-02-22 modified by Wang Chunsheng
|
|
-- Add new node hpnicfDot11CfgChannelLockStat, hpnicfDot11CfgPowerLockStat,
|
|
-- hpnicfDot11CfgLBRdGroupId, hpnicfDot11CfgRRMSDRdGroupId to hpnicfDot11RadioToConfigTable.
|
|
-- 2010-03-15 modified by Wang Lu
|
|
-- Add hpnicfDot11RtCollectSwitch, hpnicfDot11RglCollectIntvl, and
|
|
-- hpnicfDot11RtCollectIntvl to hpnicfDot11GlobeConfigGroup
|
|
-- Add hpnicfDot11SPIsolate to hpnicfDot11ServicePolicyTable
|
|
-- Add hpnicfDot11APServiceVlanTable, hpnicfDot11RadioConfigTable,
|
|
-- hpnicfDot11RadioPolicyExtTable and hpnicfDot11RadioSSIDCfgTable
|
|
-- Remove hpnicfDot11CfgTrapConfigGroup
|
|
-- Add hpnicfDot11SrvPortSecurityTable
|
|
-- 2010-06-01 Modified by Wang Shaojie, Yin Junjie
|
|
-- Add hpnicfDot11RCApPowerLevel, hpnicfDot11RCDynamicChlState,
|
|
-- hpnicfDot11RCDynamicPowerState to hpnicfDot11RadioConfigTable.
|
|
-- Add hpnicfDot11APSerialIDTable
|
|
-- Add hpnicfDot11APSTVlanTable
|
|
-- 2010-07-08 Modified the index of hpnicfDot11APSysInfoSetTable by jinyi
|
|
-- 2010-08-05 Modified by Yin Junjie
|
|
-- Add new table hpnicfDot11SrvPolicyExtendTable
|
|
-- Add hpnicfDot11SPEnable to hpnicfDot11SrvPolicyExtendTable
|
|
-- 2010-09-02 Modified by Yin Junjie
|
|
-- Add new node hpnicfDot11AdjIntfTrapThreshold
|
|
-- to hpnicfDot11GlobeConfigGroup
|
|
-- Add hpnicfDot11RCRadioStatus to hpnicfDot11RadioConfigTable
|
|
-- V2.5 2010-09-25 Modified by Wu Xiaopeng
|
|
-- Remove Size list of hpnicfDot11APName.
|
|
-- V2.6 2011-05-23 Modified by Cui Kai
|
|
-- Add new node hpnicfDot11WlanexAuthServerIP to hpnicfDot11ServicePolicyTable
|
|
-- 2011-07-08 Modified by Niu Jian
|
|
-- Change type of hpnicfDot11CfgSTNASPortID to OCTET STRING
|
|
-- V2.7 2011-07-13 Modified by Yu Bo
|
|
-- Add new node hpnicfDot11RCRadioRate to hpnicfDot11RadioConfigTable
|
|
-- Add new node hpnicfDot11RCPwrAdjustStepLength to hpnicfDot11RadioConfigTable
|
|
-- 2011-08-08 Modified by Xiao Min
|
|
-- Add new table hpnicfDot11nRadioCfg2Table
|
|
-- 2011-08-10 Modified by limingjin
|
|
-- Add hpnicfDot11RadioCfgType2 to hpnicfDot11RadioIntfConfigTable
|
|
-- Add hpnicfDot11RCRadioType2 to hpnicfDot11RadioConfigTable
|
|
-- Add hpnicfDot11CfgRadioType2 to hpnicfDot11RadioToConfigTable
|
|
-- V2.8 2011-09-28 Modified by zhanghu
|
|
-- Add hpnicfDot11ApTrapEnabled to hpnicfDot11APTemplateTable
|
|
-- Add hpnicfDot11AllAPMonitorMode to hpnicfDot11APTemplateTable
|
|
-- Add hpnicfDot11SIDAPTemplateName, hpnicfDot11SIDModelAlias, hpnicfDot11SIDAPDescription, hpnicfDot11SIDRowStatus,
|
|
-- hpnicfDot11SIDAPName, hpnicfDot11SIDStatisInterv, hpnicfDot11SIDAPBroadcastProbeReply,
|
|
-- hpnicfDot11SIDAPStaIdleTimerInterv, hpnicfDot11SIDStaKeepAliveTimerInterv,
|
|
-- hpnicfDot11SIDAPCir, hpnicfDot11SIDAPCbs, hpnicfDot11SIDAPPriorityLevel,
|
|
-- hpnicfDot11SIDAPElementID, hpnicfDot11SIDAPDevDetectEnable, hpnicfDot11SIDAPStatisIntervMode
|
|
-- to hpnicfDot11APSerialIDTable
|
|
-- 2011-08-28 Modified by Wang Lu
|
|
-- Add hpnicfDot11CfgSaEnable, hpnicfDot11CfgSaBand, hpnicfDot11CfgIDSEnable,
|
|
-- hpnicfDot11CfgSaCltRtFFTData to hpnicfDot11RadioToConfigTable
|
|
-- V2.9 2012-08-10 by Zhang Cong cong
|
|
-- Add new node hpnicfDot11ConfigureAPMacAddress to hpnicfDot11CfgTrapVarObjects
|
|
-- Add new object hpnicfDot11ConfigureAPMacAddress to hpnicfDot11SSIDWepIDConflictTrap
|
|
-- V3.0 2013-04-15 by Shao Pengfei & Li Shihao
|
|
-- Add new node hpnicfDot11GlobalApFmwUpdState to hpnicfDot11GlobeConfigGroup
|
|
-- Add new node hpnicfDot11ApFmwUpdState to hpnicfDot11APTemplateTable
|
|
-- Add new node hpnicfDot11SPBeaconMeasEnable to hpnicfDot11ServicePolicyTable
|
|
-- Add new node hpnicfDot11SPBeaconMeasType to hpnicfDot11ServicePolicyTable
|
|
-- Add new node hpnicfDot11SPBeaconMeasInterval to hpnicfDot11ServicePolicyTable
|
|
-- V3.1 2013-08-30 by Xiao Mengmeng & Li Qian & Ji Chunyu & Liu Yawen
|
|
-- Add hpnicfDot11AuthenModeCM to hpnicfDot11ServicePolicyTable
|
|
-- Add hpnicfDot11SecIEStatusCM to hpnicfDot11ServicePolicyTable
|
|
-- Add hpnicfDot11SecurityCiphersCM to hpnicfDot11ServicePolicyTable
|
|
-- Add hpnicfDot11SrvPolicyStatusCM to hpnicfDot11ServicePolicyTable
|
|
-- Add hpnicfDot11CfgSTNASID to hpnicfDot11APSTVlanTable
|
|
-- Add hpnicfDot11RCPreambleLenCM to hpnicfDot11RadioConfigTable
|
|
-- Add hpnicfDot11RCDynamicChlStateCM to hpnicfDot11RadioConfigTable
|
|
-- Add hpnicfDot11RCRadioStatusCM to hpnicfDot11RadioConfigTable
|
|
-- Add hpnicfDot11SIDAPWorkModeCM to hpnicfDot11APSerialIDTable
|
|
-- Add hpnicfDot11nRadioCfg2AMpduEnableCM to hpnicfDot11nRadioCfg2Table
|
|
-- Add hpnicfDot11nRadioCfg2ChannelBandCM to hpnicfDot11nRadioCfg2Table
|
|
-- Add hpnicfDot11nRadioCfg2ShortGiEnableCM to hpnicfDot11nRadioCfg2Table
|
|
-- 2013-12-24 Modified by Chen Guoxi
|
|
-- Add mode80 to hpnicfDot11nChanelBand and hpnicfDot11nRadioCfg2ChannelBand
|
|
-- Add new node hpnicfDot11nClientDot11acOnly to hpnicfDot11nRadioCfgTable
|
|
-- Add new node hpnicfDot11nRadioCfg2ClientDot11acOnly to hpnicfDot11nRadioCfg2Table
|
|
-- V3.2 2014-02-10 by Zhou Weichao
|
|
-- Add hpnicfDot11ACNasIDCM to hpnicfDot11GlobeConfigGroup
|
|
-- Add hpnicfDot11SSIDHiddenCM to hpnicfDot11ServicePolicyTable
|
|
-- Add hpnicfDot11SPIsolateCM to hpnicfDot11ServicePolicyTable
|
|
-- Add hpnicfDot11RPBeaconIntervalCM to hpnicfDot11RadioPolicyExtTable
|
|
-- Add hpnicfDot11StatisIntervModeCM to hpnicfDot11APTemplateTable
|
|
-- Add hpnicfDot11APNasIDCM to hpnicfDot11APTemplateTable
|
|
-- Add hpnicfDot11RCDynamicPowerStateCM to hpnicfDot11RadioConfigTable
|
|
-- Add hpnicfDot11RCRadioRateCM to hpnicfDot11RadioConfigTable
|
|
-- Add hpnicfDot11nRadioCfg2ClientDot11nOnlyCM to hpnicfDot11nRadioCfg2Table
|
|
-- Modify hpnicfDot11WlanexAuthServerIP
|
|
-- Add hpnicfDot11RadioCfgRssithresholdCM to hpnicfDot11RadioIntfConfigTable
|
|
-- Add hpnicfDot11SrvPortSecurityModeCM to hpnicfDot11SrvPortSecurityTable
|
|
-- V3.3 2014-5-14 Add by yubo
|
|
-- Add hpnicfDot11RCRssiThresholdCM to hpnicfDot11RadioConfigTable
|
|
-- =============================================================================
|
|
HPN-ICF-DOT11-CFG-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
TruthValue,
|
|
RowStatus,
|
|
DisplayString,
|
|
DateAndTime,
|
|
MacAddress
|
|
FROM SNMPv2-TC
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
MODULE-IDENTITY,
|
|
NOTIFICATION-TYPE,
|
|
OBJECT-TYPE,
|
|
Integer32,
|
|
Unsigned32,
|
|
IpAddress
|
|
FROM SNMPv2-SMI
|
|
InetAddress
|
|
FROM INET-ADDRESS-MIB
|
|
hpnicfDot11,
|
|
HpnicfDot11RadioType,
|
|
HpnicfDot11TxPwrLevelScopeType,
|
|
HpnicfDot11ChannelScopeType,
|
|
HpnicfDot11SSIDStringType,
|
|
HpnicfDot11AuthenType,
|
|
HpnicfDot11RadioScopeType,
|
|
HpnicfDot11SSIDEncryptModeType,
|
|
HpnicfDot11SecIEStatusType,
|
|
HpnicfDot11PreambleType,
|
|
HpnicfDot11ServicePolicyIDType,
|
|
HpnicfDot11TunnelSecSchemType,
|
|
HpnicfDot11RadioElementIndex,
|
|
HpnicfDot11WorkMode,
|
|
HpnicfDot11CirMode,
|
|
hpnicfDot11APElementIndex,
|
|
HpnicfDot11ObjectIDType,
|
|
HpnicfDot11RadioType2,
|
|
HpnicfDot11TruthValueCM
|
|
FROM HPN-ICF-DOT11-REF-MIB;
|
|
|
|
hpnicfDot11CFG MODULE-IDENTITY
|
|
LAST-UPDATED "201009251800Z" -- Sep 25, 2010 at 18:00 GMT
|
|
ORGANIZATION
|
|
""
|
|
CONTACT-INFO
|
|
""
|
|
DESCRIPTION
|
|
"This MIB provides information about WLAN configuration.
|
|
|
|
GLOSSARY
|
|
|
|
IEEE 802.11
|
|
Standard to encourage interoperability among
|
|
wireless networking equipment.
|
|
|
|
Access point (AP)
|
|
Transmitter/receiver (transceiver) device
|
|
that commonly connects and transports data
|
|
between a wireless network and a wired network.
|
|
|
|
Access control (AC)
|
|
To control and manage multi-APs, it will bridge
|
|
wireless and wired network.
|
|
|
|
Fat AP
|
|
Applied in the home, SOHO and so on, and it could
|
|
work independently without help from AC.
|
|
|
|
Fit AP
|
|
Applied in the enterprise environment, it will work
|
|
under the control and management from AC.
|
|
|
|
Control And Provisioning of Wireless Access Points Protocol
|
|
The short name of protocol is CAPWAP. AC will control
|
|
and manage AP by CAPWAP tunnel protocol defined by IETF.
|
|
Also, a data tunnel will be set up between AC and AP.
|
|
|
|
BSS
|
|
IEEE 802.11 Basic Service Set (Radio Cell). The
|
|
BSS of an AP comprises of the stations directly
|
|
associating with the AP.
|
|
|
|
Radio
|
|
The chip set to receive and send wireless signal.
|
|
|
|
Association
|
|
The service used to establish access point
|
|
or station mapping and enable station invocation
|
|
of the distribution system services.
|
|
(Wireless clients attempt to connect to
|
|
access points.)
|
|
|
|
Basic Rate
|
|
A data rate that is mandatory for client
|
|
devices to support in order for them to achieve
|
|
successful association.
|
|
|
|
MSDU
|
|
MAC Service Data Unit, it is frame format defined by
|
|
802.11.
|
|
|
|
TU
|
|
It is 1,024 microseconds (ms), which is about 1
|
|
millisecond.
|
|
|
|
AKM
|
|
The authentication and key management method defined by
|
|
802.11i, and which includes 802.1x and pre-shared key."
|
|
REVISION "201009251800Z" -- Sep 25, 2010 at 18:00 GMT
|
|
DESCRIPTION
|
|
"Modified to remove some issue."
|
|
REVISION "201009021800Z" -- Sep 2, 2010 at 18:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new node."
|
|
REVISION "200907291800Z" -- Jul 29, 2009 at 18:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new nodes and new table."
|
|
REVISION "200905072000Z" -- May 7, 2009 at 20:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new nodes and new table."
|
|
REVISION "200903201530Z" -- Mar 20, 2009 at 15:30 GMT
|
|
DESCRIPTION
|
|
"Modified to add new value for appointed node."
|
|
REVISION "200811071530Z" -- Nov 07, 2008 at 15:30 GMT
|
|
DESCRIPTION
|
|
"Modified to add new nodes and new table."
|
|
REVISION "200807091800Z" -- July 09, 2008 at 18:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new groups."
|
|
REVISION "200802251800Z" -- Feb 25, 2008 at 18:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new nodes."
|
|
REVISION "200712211800Z" -- Dec 21, 2007 at 18:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new nodes."
|
|
REVISION "200710091655Z" -- October 09, 2007 at 16:55 GMT
|
|
DESCRIPTION
|
|
"changed for new requirements"
|
|
REVISION "200706191800Z" -- June 19, 2007 at 18:00 GMT
|
|
DESCRIPTION
|
|
"Modified to add new table."
|
|
REVISION "200704272000Z" -- Apr 27, 2007 at 20:00 GMT
|
|
DESCRIPTION
|
|
"Modified to fix some issue."
|
|
REVISION "200702012000Z" -- February 01, 2007 at 20:00 GMT
|
|
DESCRIPTION
|
|
"Modified to support fat AP."
|
|
REVISION "200605101900Z" -- May 10, 2006 at 19:00 GMT
|
|
DESCRIPTION
|
|
"The initial revision of this MIB module."
|
|
::= { hpnicfDot11 4 }
|
|
|
|
-- *****************************************************************************
|
|
-- * Major sections
|
|
-- *****************************************************************************
|
|
-- AP Configuration Group
|
|
-- DEFINED AS "The group to provide the configuration information
|
|
-- for APs.
|
|
hpnicfDot11GlobeConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 1 }
|
|
|
|
hpnicfDot11PolicyConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 2 }
|
|
-- Policy Configuration Group has the following children:
|
|
-- hpnicfDot11RadioPolicyTable ::= { hpnicfDot11PolicyConfigGroup 1 }
|
|
-- hpnicfDot11ServicePolicyTable ::= { hpnicfDot11PolicyConfigGroup 2 }
|
|
-- hpnicfDot11ServicePolicyExtTable ::= { hpnicfDot11PolicyConfigGroup 3 }
|
|
-- hpnicfDot11RadioPolicyExtTable ::= { hpnicfDot11PolicyConfigGroup 4 }
|
|
|
|
hpnicfDot11APConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 3 }
|
|
-- AP Configuration Group has the following children:
|
|
-- hpnicfDot11APTemplateTable ::= { hpnicfDot11APConfigGroup 1 }
|
|
-- hpnicfDot11RadioToConfigTable ::= { hpnicfDot11APConfigGroup 2 }
|
|
-- hpnicfDot11APServiceSetTable ::= { hpnicfDot11APConfigGroup 3 }
|
|
-- hpnicfDot11APSysInfoSetTable ::= { hpnicfDot11APConfigGroup 4 }
|
|
-- hpnicfDot11APLimitTable ::= { hpnicfDot11APConfigGroup 5 }
|
|
-- hpnicfDot11APSerialIDTable ::= { hpnicfDot11APConfigGroup 10 }
|
|
-- hpnicfDot11APSTVlanTable ::= { hpnicfDot11APConfigGroup 11 }
|
|
hpnicfDot11RadioIntfConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 4 }
|
|
-- Radio Interface Group has the following children:
|
|
-- hpnicfDot11RadioIntfConfigTable ::= { hpnicfDot11RadioIntfConfigGroup 1 }
|
|
-- hpnicfDot11RadioIntfBindTable ::= { hpnicfDot11RadioIntfConfigGroup 2 }
|
|
|
|
hpnicfDot11DataRateConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 5 }
|
|
-- Data Rate Config Group has the following children:
|
|
-- hpnicfDot11DataRateConfigTable ::= { hpnicfDot11DataRateConfigGroup 1 }
|
|
|
|
hpnicfDot11InterfaceConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 6 }
|
|
-- Interface Config Group has the following children:
|
|
-- hpnicfDot11WlanEssIfTable ::= { hpnicfDot11InterfaceConfigGroup 1 }
|
|
-- hpnicfDot11WlanBssIfTable ::= { hpnicfDot11InterfaceConfigGroup 2 }
|
|
-- hpnicfDot11WLANEthernetIfTable ::= { hpnicfDot11InterfaceConfigGroup 3 }
|
|
-- hpnicfDot11PortSecurityTable ::= { hpnicfDot11InterfaceConfigGroup 4 }
|
|
-- hpnicfDot11WlanMeshIfTable ::= { hpnicfDot11InterfaceConfigGroup 5 }
|
|
|
|
hpnicfDot11ACBackupGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 7 }
|
|
|
|
hpnicfDot11RadioElementConfigGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 8 }
|
|
-- Radio Element Config Group has the following children:
|
|
-- hpnicfDot11nRadioCfgTable ::= { hpnicfDot11RadioElementConfigGroup 1 }
|
|
-- hpnicfDot11RadioWDSTable ::= { hpnicfDot11RadioElementConfigGroup 2 }
|
|
-- hpnicfDot11nRadioCfg2Table ::= { hpnicfDot11RadioElementConfigGroup 3 }
|
|
|
|
hpnicfDot11CfgNotifyGroup OBJECT IDENTIFIER ::= { hpnicfDot11CFG 9 }
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11GlobeConfigGroup Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11GlobalCountryCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the country code for wireless network."
|
|
::= { hpnicfDot11GlobeConfigGroup 1 }
|
|
|
|
hpnicfDot11StaKeepALiveTimerIntvl OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval of the keep alive requests sent between
|
|
AP and STA.
|
|
Default value 0 : The keep alive function is disabled."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11GlobeConfigGroup 2 }
|
|
|
|
hpnicfDot11StaIdleTimerIntvl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval for which the link between AP and STA
|
|
( power-save or awake ) can be idle."
|
|
::= { hpnicfDot11GlobeConfigGroup 3 }
|
|
|
|
hpnicfDot11BroadcastProbeReply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents enable the AP to reply broadcast probe or not.
|
|
'true' : The AP to reply broadcast probe is enabled.
|
|
'false': The AP to reply broadcast probe is disabled"
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11GlobeConfigGroup 4 }
|
|
|
|
hpnicfDot11APScanMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
passive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the scanning mode for AP.
|
|
The following values are supported:
|
|
active - AP will actively do scan.
|
|
passive - AP will passively do scan."
|
|
DEFVAL { passive }
|
|
::= { hpnicfDot11GlobeConfigGroup 5 }
|
|
|
|
hpnicfDot11ACCtrlTunnelSecSupport OBJECT-TYPE
|
|
SYNTAX HpnicfDot11TunnelSecSchemType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents what security schemes are supported for CAPWAP Control
|
|
tunnel."
|
|
::= { hpnicfDot11GlobeConfigGroup 6 }
|
|
|
|
hpnicfDot11ACDataTunnelSecSupport OBJECT-TYPE
|
|
SYNTAX HpnicfDot11TunnelSecSchemType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents what security schemes are supported for CAPWAP data
|
|
tunnel. The cleartxt is the default scheme."
|
|
DEFVAL { cleartxt }
|
|
::= { hpnicfDot11GlobeConfigGroup 7 }
|
|
|
|
hpnicfDot11ACAutoAPSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents enable the auto AP functionality or not.
|
|
'true' : The auto AP functionality is enabled.
|
|
'false': The auto AP functionality is disabled"
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11GlobeConfigGroup 8 }
|
|
|
|
hpnicfDot11AutoAPName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the name of auto AP that needs to be made persistent.
|
|
When read the value from the node, NULL value be returned."
|
|
::= { hpnicfDot11GlobeConfigGroup 9 }
|
|
|
|
hpnicfDot11PersistentName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the new name of auto AP after being made persistent.
|
|
When read the value from the node, NULL value be returned."
|
|
::= { hpnicfDot11GlobeConfigGroup 10 }
|
|
|
|
hpnicfDot11IntfTrapThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents threshold of interference trap. If signal strength of
|
|
the device exceeds this threshold, corresponding trap will
|
|
be sent."
|
|
::= { hpnicfDot11GlobeConfigGroup 11 }
|
|
|
|
hpnicfDot11MonitorInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32(0 | 5..15)
|
|
UNITS "minute"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the monitoring interval.
|
|
Default value 0 : The monitoring functionality is changed to
|
|
real-time mode."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11GlobeConfigGroup 12 }
|
|
|
|
hpnicfDot11SampleInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32(0 | 10..300)
|
|
UNITS "second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the sampling interval.
|
|
Default value 0 : The sampling functionality is disabled."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11GlobeConfigGroup 13 }
|
|
|
|
hpnicfDot11ChnlSwitChkInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32(8..180)
|
|
UNITS "minute"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the checking interval of channel switch."
|
|
DEFVAL { 8 }
|
|
::= { hpnicfDot11GlobeConfigGroup 14 }
|
|
|
|
hpnicfDot11APUserUplimit OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the upper limit of user which has access to this AP."
|
|
::= { hpnicfDot11GlobeConfigGroup 15 }
|
|
|
|
hpnicfDot11APL2IsolateEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents enable the layer2 isolation or not.
|
|
'true' : The layer2 isolation functionality is enabled.
|
|
'false': The layer2 isolation functionality is disabled."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11GlobeConfigGroup 16 }
|
|
|
|
hpnicfDot11APBSSIDSupportNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the max number of BSSID supported by Current AP."
|
|
::= { hpnicfDot11GlobeConfigGroup 17 }
|
|
|
|
hpnicfDot11APLastUpdateStatTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents date and time update statistic information lately."
|
|
::= { hpnicfDot11GlobeConfigGroup 18 }
|
|
|
|
hpnicfDot11APDoSProtectEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents enable the DOS protection or not.
|
|
'true' : The DOS protection functionality is enabled.
|
|
'false': The DOS protection functionality is disabled."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11GlobeConfigGroup 19 }
|
|
|
|
hpnicfDot11MaxAPPerIf OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents max AP number that can be connected to AC interface."
|
|
::= { hpnicfDot11GlobeConfigGroup 20 }
|
|
|
|
hpnicfDot11SampleTimeStamp OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the start time of current sample period."
|
|
::= { hpnicfDot11GlobeConfigGroup 21 }
|
|
|
|
hpnicfDot11UplinkTrackId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the track id of AP.
|
|
Default value 0 : The uplink track function for AP is disabled."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11GlobeConfigGroup 22 }
|
|
|
|
hpnicfDot11RtCollectSwitch OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to turn on/off real-time statistics collection
|
|
between AC and AP. If the value is true, hpnicfDot11RtCollectIntvl will
|
|
take effect. Otherwise, hpnicfDot11RglCollectIntvl will take effect."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11GlobeConfigGroup 23 }
|
|
|
|
hpnicfDot11RglCollectIntvl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents interval to regularly collect statistics from
|
|
AC to AP."
|
|
::= { hpnicfDot11GlobeConfigGroup 24 }
|
|
|
|
hpnicfDot11RtCollectIntvl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents interval to collect real-time statistics from
|
|
AC to AP."
|
|
::= { hpnicfDot11GlobeConfigGroup 25 }
|
|
|
|
hpnicfDot11AllAPCpuUsageThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
UNITS "onepercent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CPU usage threshold for all AP."
|
|
::= { hpnicfDot11GlobeConfigGroup 26 }
|
|
|
|
hpnicfDot11AllAPMemUsageThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
UNITS "onepercent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The memory usage threshold for all AP."
|
|
::= { hpnicfDot11GlobeConfigGroup 27 }
|
|
|
|
hpnicfDot11AdjIntfTrapThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents threshold of adjacent interference trap. If signal strength
|
|
of the device exceeds this threshold, corresponding trap will be sent."
|
|
::= { hpnicfDot11GlobeConfigGroup 28 }
|
|
|
|
hpnicfDot11AllAPMonitorMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
monitor(2),
|
|
hybrid(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents what work mode for All AP.
|
|
The following values are supported:
|
|
normal, - AP will supply WLAN service.
|
|
monitor - AP will be a monitor to find attack.
|
|
hybrid - AP will supply WLAN service and Device detection is
|
|
enabled."
|
|
DEFVAL { normal }
|
|
::= { hpnicfDot11GlobeConfigGroup 29 }
|
|
|
|
hpnicfDot11GlobalApFmwUpdState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the status of version auto-update for an AP.
|
|
The following values are supported:
|
|
enable - AP version will be updated automatically.
|
|
disable - AP version will not be updated automatically."
|
|
DEFVAL { enable }
|
|
::= { hpnicfDot11GlobeConfigGroup 30 }
|
|
|
|
hpnicfDot11ACNasIDCM OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the NAS-ID of current AC."
|
|
::= { hpnicfDot11GlobeConfigGroup 31 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11GlobeConfigGroup Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11RadioPolicyTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11RadioPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RadioPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table defines the parameters for radio policy, as per
|
|
radio policy of CLI.
|
|
One radio policy could be assigned to the different radios (AP)."
|
|
::= { hpnicfDot11PolicyConfigGroup 1 }
|
|
|
|
hpnicfDot11RadioPolicyEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of each radio policy."
|
|
INDEX
|
|
{
|
|
IMPLIED hpnicfDot11RadioPolicyName
|
|
}
|
|
::= { hpnicfDot11RadioPolicyTable 1 }
|
|
|
|
HpnicfDot11RadioPolicyEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11RadioPolicyName OCTET STRING,
|
|
hpnicfDot11BeaconInterval Integer32,
|
|
hpnicfDot11DtimInterval Integer32,
|
|
hpnicfDot11RtsThreshold Integer32,
|
|
hpnicfDot11FragThreshold Integer32,
|
|
hpnicfDot11ShortRetryThreshold Integer32,
|
|
hpnicfDot11LongRetryThreshold Integer32,
|
|
hpnicfDot11MaxRxLifetime Unsigned32,
|
|
hpnicfDot11RdoPolicyRowStatus RowStatus,
|
|
hpnicfDot11RdoClientMaxCount Integer32,
|
|
hpnicfDot11BeaconIntervalMs Integer32
|
|
}
|
|
|
|
hpnicfDot11RadioPolicyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the name of radio policy."
|
|
::= { hpnicfDot11RadioPolicyEntry 1 }
|
|
|
|
hpnicfDot11BeaconInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "TU"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval for Beacon management frame."
|
|
DEFVAL { 100 }
|
|
::= { hpnicfDot11RadioPolicyEntry 2 }
|
|
|
|
hpnicfDot11DtimInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of beacon intervals that shall elapse
|
|
between transmission of Beacons frames containing a Traffic
|
|
Indication Map (TIM) element whose DTIM Count field is 0.
|
|
This value is transmitted in the Delivery TIM (DTIM) Period
|
|
field of Beacon frames."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot11RadioPolicyEntry 3 }
|
|
|
|
hpnicfDot11RtsThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "byte"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the current minimum size, in octets, of the MAC
|
|
protocol data unit (MPDU), below which a Request to send/Clear
|
|
to send (RTS/CTS) handshake shall not be performed."
|
|
DEFVAL { 2346 }
|
|
::= { hpnicfDot11RadioPolicyEntry 4 }
|
|
|
|
hpnicfDot11FragThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "byte"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the current maximum size, in octets, of the MPDU that
|
|
may be delivered to the PHY. A MSDU shall be broken into
|
|
fragments if its size exceeds the value of this attribute after
|
|
adding MAC headers and trailers."
|
|
DEFVAL { 2346 }
|
|
::= { hpnicfDot11RadioPolicyEntry 5 }
|
|
|
|
hpnicfDot11ShortRetryThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the maximum number of transmission attempts of a
|
|
frame, the length of which is less than or equal to
|
|
hpnicfDot11RTSThreshold, which shall be made before a failure
|
|
condition is indicated."
|
|
DEFVAL { 7 }
|
|
::= { hpnicfDot11RadioPolicyEntry 6 }
|
|
|
|
hpnicfDot11LongRetryThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the maximum number of transmission attempts of a
|
|
frame, the length of which is longer than hpnicfDot11RTSThreshold,
|
|
that shall be made before a failure condition is indicated."
|
|
DEFVAL { 4 }
|
|
::= { hpnicfDot11RadioPolicyEntry 7 }
|
|
|
|
hpnicfDot11MaxRxLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "millisecond"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the elapsed time. After the time specified by
|
|
hpnicfDot11MaxRxLifetime, the further attempts to reassemble the
|
|
MSDU shall be terminated."
|
|
DEFVAL { 2000 }
|
|
::= { hpnicfDot11RadioPolicyEntry 8 }
|
|
|
|
hpnicfDot11RdoPolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11RadioPolicyEntry 9 }
|
|
|
|
hpnicfDot11RdoClientMaxCount OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represent the maximum number of stations supported by
|
|
this radio policy."
|
|
::= { hpnicfDot11RadioPolicyEntry 10 }
|
|
|
|
hpnicfDot11BeaconIntervalMs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "ms"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval for Beacon management frame."
|
|
::= { hpnicfDot11RadioPolicyEntry 11 }
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11RadioPolicyTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11ServicePolicyTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11ServicePolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11ServicePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table defines the parameters for ESS, as per service policy
|
|
of CLI.
|
|
One service policy could be assigned to the different radios
|
|
(AP)."
|
|
::= { hpnicfDot11PolicyConfigGroup 2 }
|
|
|
|
hpnicfDot11ServicePolicyEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ServicePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of each service policy."
|
|
INDEX
|
|
{
|
|
hpnicfDot11ServicePolicyID
|
|
}
|
|
::= { hpnicfDot11ServicePolicyTable 1 }
|
|
|
|
HpnicfDot11ServicePolicyEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11ServicePolicyID HpnicfDot11ServicePolicyIDType,
|
|
hpnicfDot11SSIDName HpnicfDot11SSIDStringType,
|
|
hpnicfDot11SSIDHidden TruthValue,
|
|
hpnicfDot11AuthenMode HpnicfDot11AuthenType,
|
|
hpnicfDot11SSIDEncryptionMode HpnicfDot11SSIDEncryptModeType,
|
|
hpnicfDot11WlanInfBindingType OCTET STRING,
|
|
hpnicfDot11WlanInfBindingID Integer32,
|
|
hpnicfDot11SrvPolicyRowStatus RowStatus,
|
|
hpnicfDot11ClientMaxCount Integer32,
|
|
hpnicfDot11SPInCirMode HpnicfDot11CirMode,
|
|
hpnicfDot11SPInCirValue Integer32,
|
|
hpnicfDot11SPOutCirMode HpnicfDot11CirMode,
|
|
hpnicfDot11SPOutCirValue Integer32,
|
|
hpnicfDot11WlanInfPVID Integer32,
|
|
hpnicfDot11SPInCirStaticValue Integer32,
|
|
hpnicfDot11SPOutCirStaticValue Integer32,
|
|
hpnicfDot11SPIsolate TruthValue,
|
|
hpnicfDot11WlanexAuthServerIP IpAddress,
|
|
hpnicfDot11SPBeaconMeasEnable TruthValue,
|
|
hpnicfDot11SPBeaconMeasType INTEGER,
|
|
hpnicfDot11SPBeaconMeasInterval Integer32,
|
|
hpnicfDot11AuthenModeCM INTEGER,
|
|
hpnicfDot11SecIEStatusCM INTEGER,
|
|
hpnicfDot11SecurityCiphersCM INTEGER,
|
|
hpnicfDot11SrvPolicyStatusCM INTEGER,
|
|
hpnicfDot11SSIDHiddenCM HpnicfDot11TruthValueCM,
|
|
hpnicfDot11SPIsolateCM HpnicfDot11TruthValueCM
|
|
}
|
|
|
|
hpnicfDot11ServicePolicyID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ServicePolicyIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the ID of each service policy."
|
|
::= { hpnicfDot11ServicePolicyEntry 1 }
|
|
|
|
hpnicfDot11SSIDName OBJECT-TYPE
|
|
SYNTAX HpnicfDot11SSIDStringType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the ESS. As per CLI, the value of
|
|
service policy name will be SSID."
|
|
::= { hpnicfDot11ServicePolicyEntry 2 }
|
|
|
|
hpnicfDot11SSIDHidden OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute controls whether the SSID will be advertised in
|
|
the beacon frame.
|
|
If it is true, then SSID will not be advertised in the beacon
|
|
frame."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11ServicePolicyEntry 3 }
|
|
|
|
hpnicfDot11AuthenMode OBJECT-TYPE
|
|
SYNTAX HpnicfDot11AuthenType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Authentication mode defined by 802.11."
|
|
::= { hpnicfDot11ServicePolicyEntry 4 }
|
|
|
|
hpnicfDot11SSIDEncryptionMode OBJECT-TYPE
|
|
SYNTAX HpnicfDot11SSIDEncryptModeType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the encryption mode for this ESS."
|
|
::= { hpnicfDot11ServicePolicyEntry 5 }
|
|
|
|
hpnicfDot11WlanInfBindingType OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the service policy will bind to what kind of
|
|
data forwarding interface."
|
|
DEFVAL { "WLAN-ESS" }
|
|
::= { hpnicfDot11ServicePolicyEntry 6 }
|
|
|
|
hpnicfDot11WlanInfBindingID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interface ID of the interface that ESS will
|
|
bind to.
|
|
If the value is set to -1, the binding will be removed."
|
|
::= { hpnicfDot11ServicePolicyEntry 7 }
|
|
|
|
hpnicfDot11SrvPolicyRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11ServicePolicyEntry 8 }
|
|
|
|
hpnicfDot11ClientMaxCount OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represent the maximum number of stations supported by
|
|
this service policy."
|
|
::= { hpnicfDot11ServicePolicyEntry 9 }
|
|
|
|
hpnicfDot11SPInCirMode OBJECT-TYPE
|
|
SYNTAX HpnicfDot11CirMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
CIR(committed information rate) mode of inbound direction.
|
|
This object is useful only when the corresponding CIR is nonzero.
|
|
If value of this object is changed, corresponding CIR will be reset."
|
|
DEFVAL { static }
|
|
::= { hpnicfDot11ServicePolicyEntry 10 }
|
|
|
|
hpnicfDot11SPInCirValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the CIR of inbound direction of this service policy.
|
|
If the value is 0, it means that no flow control is applied to
|
|
the service policy, and the corresponding CIR mode is meaningless."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11ServicePolicyEntry 11 }
|
|
|
|
hpnicfDot11SPOutCirMode OBJECT-TYPE
|
|
SYNTAX HpnicfDot11CirMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
CIR(committed information rate) mode of outbound direction.
|
|
This object is useful only when the corresponding CIR is nonzero.
|
|
If value of this object is changed, corresponding CIR will be reset."
|
|
DEFVAL { static }
|
|
::= { hpnicfDot11ServicePolicyEntry 12 }
|
|
|
|
hpnicfDot11SPOutCirValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the CIR of outbound direction of this service policy.
|
|
If the value is 0, it means that no flow control is applied to
|
|
the service policy, and the corresponding CIR mode is meaningless."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11ServicePolicyEntry 13 }
|
|
|
|
hpnicfDot11WlanInfPVID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the VLAN ID of SSID."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot11ServicePolicyEntry 14 }
|
|
|
|
hpnicfDot11SPInCirStaticValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the CIR of inbound direction for static CIR mode."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11ServicePolicyEntry 15 }
|
|
|
|
hpnicfDot11SPOutCirStaticValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the CIR of outbound direction for static CIR mode."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11ServicePolicyEntry 16 }
|
|
|
|
hpnicfDot11SPIsolate OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If it is true, then stations connected with the service policy are
|
|
isolated."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11ServicePolicyEntry 17 }
|
|
|
|
hpnicfDot11WlanexAuthServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the IP address of the Wlanex Authentication server"
|
|
::= { hpnicfDot11ServicePolicyEntry 18 }
|
|
|
|
hpnicfDot11SPBeaconMeasEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If it is true, then beacon-measurement is enabled."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11ServicePolicyEntry 19 }
|
|
|
|
hpnicfDot11SPBeaconMeasType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
passive(1),
|
|
active(2),
|
|
beaconTable(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents what the work mode for BeaconMeasurement type.
|
|
The following values are supported:
|
|
passive, - BeaconMeasurement will use the passive type.
|
|
active - BeaconMeasurement will use the active type.
|
|
beaconTable - BeaconMeasurement will use the beacon table type."
|
|
DEFVAL { beaconTable }
|
|
::= { hpnicfDot11ServicePolicyEntry 20 }
|
|
|
|
hpnicfDot11SPBeaconMeasInterval OBJECT-TYPE
|
|
SYNTAX Integer32(10..200)
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the beacon-measurement interval."
|
|
DEFVAL { 60 }
|
|
::= { hpnicfDot11ServicePolicyEntry 21 }
|
|
|
|
hpnicfDot11AuthenModeCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
opensystem(0),
|
|
sharedkey(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Authentication mode defined by 802.11."
|
|
::= { hpnicfDot11ServicePolicyEntry 22 }
|
|
|
|
hpnicfDot11SecIEStatusCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
wpa(1),
|
|
wpa2(2),
|
|
wlanex(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable the security Information element in the beacon and
|
|
probe response frames sent by AP."
|
|
::= { hpnicfDot11ServicePolicyEntry 23 }
|
|
|
|
hpnicfDot11SecurityCiphersCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
wep40(1),
|
|
wep104(2),
|
|
tkip(3),
|
|
aesccmp(4),
|
|
wpisms4(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The WLAN system support the following cipher type for data frame
|
|
encryption.
|
|
none
|
|
wep40
|
|
wep104
|
|
tkip
|
|
aesccmp
|
|
wpi-SMS4
|
|
When the value of node equals to zero, it means no configuration or
|
|
undo operation."
|
|
::= { hpnicfDot11ServicePolicyEntry 24 }
|
|
|
|
hpnicfDot11SrvPolicyStatusCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the Service Policy."
|
|
::= { hpnicfDot11ServicePolicyEntry 25 }
|
|
|
|
hpnicfDot11SSIDHiddenCM OBJECT-TYPE
|
|
SYNTAX HpnicfDot11TruthValueCM
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute controls whether the SSID will be advertised in
|
|
beacon frames.
|
|
If it is dot11true, the SSID will not be advertised in beacon
|
|
frames."
|
|
DEFVAL { dot11false }
|
|
::= { hpnicfDot11ServicePolicyEntry 26 }
|
|
|
|
hpnicfDot11SPIsolateCM OBJECT-TYPE
|
|
SYNTAX HpnicfDot11TruthValueCM
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If it is dot11true, the clients connected with the service policy are
|
|
isolated to each other."
|
|
DEFVAL { dot11false }
|
|
::= { hpnicfDot11ServicePolicyEntry 27 }
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11ServicePolicyTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11ServicePolicyExtTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11ServicePolicyExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11ServicePolicyExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table defines the parameters for ESS, as per service policy
|
|
of CLI.
|
|
When the value of hpnicfDot11SSIDEncryptionMode equals to cipher(2),
|
|
more configuration for a ESS will be put into the table."
|
|
::= { hpnicfDot11PolicyConfigGroup 3 }
|
|
|
|
hpnicfDot11ServicePolicyExtEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ServicePolicyExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of each service policy under cipher(2)
|
|
mode."
|
|
INDEX
|
|
{
|
|
hpnicfDot11ServicePolicyExtID
|
|
}
|
|
::= { hpnicfDot11ServicePolicyExtTable 1 }
|
|
|
|
HpnicfDot11ServicePolicyExtEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11ServicePolicyExtID HpnicfDot11ServicePolicyIDType,
|
|
hpnicfDot11SecIEStatus HpnicfDot11SecIEStatusType,
|
|
hpnicfDot11SecurityCiphers Integer32,
|
|
hpnicfDot11CipherKeyIndex Integer32,
|
|
hpnicfDot11CipherKey OCTET STRING,
|
|
hpnicfDot11SrvPolicyExtRowStatus RowStatus,
|
|
hpnicfDot11CipherKeyType INTEGER
|
|
}
|
|
|
|
hpnicfDot11ServicePolicyExtID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ServicePolicyIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the ID of each service policy."
|
|
::= { hpnicfDot11ServicePolicyExtEntry 1 }
|
|
|
|
hpnicfDot11SecIEStatus OBJECT-TYPE
|
|
SYNTAX HpnicfDot11SecIEStatusType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"To enable the security Information element in the beacon and
|
|
probe response frames sent by AP."
|
|
::= { hpnicfDot11ServicePolicyExtEntry 2 }
|
|
|
|
hpnicfDot11SecurityCiphers OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The WLAN system support the following cipher type for data frame
|
|
encryption.
|
|
wep40(2)
|
|
tkip(4)
|
|
aesccmp(16)
|
|
wep104(32)
|
|
wpisms4(64)
|
|
wep128(128)
|
|
For each service policy, it could support multiple cipher types at
|
|
the same time. So the value of object could combine multiple value
|
|
of cipher type above.
|
|
When the value of node equals to zero, it means no configuration or
|
|
undo operation."
|
|
::= { hpnicfDot11ServicePolicyExtEntry 3 }
|
|
|
|
hpnicfDot11CipherKeyIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the key index of cipher key for packet.
|
|
When hpnicfDot11SecurityCiphers value is wep40 or wep104,
|
|
the configuration will take effective."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot11ServicePolicyExtEntry 4 }
|
|
|
|
hpnicfDot11CipherKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the cipher key for packet.
|
|
When hpnicfDot11SecurityCiphers value is wep40 or wep104,
|
|
the configuration will take effective."
|
|
::= { hpnicfDot11ServicePolicyExtEntry 5 }
|
|
|
|
hpnicfDot11SrvPolicyExtRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11ServicePolicyExtEntry 6 }
|
|
|
|
hpnicfDot11CipherKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
char(1),
|
|
hex(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the cipher key type of hpnicfDot11CipherKey."
|
|
DEFVAL {1}
|
|
::= { hpnicfDot11ServicePolicyExtEntry 7 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11ServicePolicyExtTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11RadioPolicyExtTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11RadioPolicyExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RadioPolicyExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table defines the radio policy of each radio.
|
|
It can't be modified if the radio policy is a default radio policy."
|
|
::= { hpnicfDot11PolicyConfigGroup 4 }
|
|
|
|
hpnicfDot11RadioPolicyExtEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioPolicyExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of each radio policy."
|
|
INDEX
|
|
{
|
|
hpnicfDot11RPAPSerialID,
|
|
hpnicfDot11RPRadioID
|
|
}
|
|
::= { hpnicfDot11RadioPolicyExtTable 1 }
|
|
|
|
HpnicfDot11RadioPolicyExtEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11RPAPSerialID OCTET STRING,
|
|
hpnicfDot11RPRadioID HpnicfDot11RadioScopeType,
|
|
hpnicfDot11RPBeaconInterval Integer32,
|
|
hpnicfDot11RPDtimInterval Integer32,
|
|
hpnicfDot11RPRtsThreshold Integer32,
|
|
hpnicfDot11RPFragThreshold Integer32,
|
|
hpnicfDot11RPShortRetryThreshold Integer32,
|
|
hpnicfDot11RPLongRetryThreshold Integer32,
|
|
hpnicfDot11RPClientMaxCount Integer32,
|
|
hpnicfDot11RPBeaconIntervalCM Integer32
|
|
}
|
|
|
|
hpnicfDot11RPAPSerialID OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Serial ID of AP."
|
|
::= { hpnicfDot11RadioPolicyExtEntry 1 }
|
|
|
|
hpnicfDot11RPRadioID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioScopeType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents each radio."
|
|
::= { hpnicfDot11RadioPolicyExtEntry 2 }
|
|
|
|
hpnicfDot11RPBeaconInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the interval for Beacon management frame."
|
|
DEFVAL { 100 }
|
|
::= { hpnicfDot11RadioPolicyExtEntry 3 }
|
|
|
|
hpnicfDot11RPDtimInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the number of beacon intervals that shall elapse
|
|
between transmissions of Beacons frames containing a Traffic
|
|
Indication Map (TIM) element whose DTIM count field is 0.
|
|
This value is transmitted in the Delivery TIM (DTIM) Period
|
|
field of Beacon frames."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot11RadioPolicyExtEntry 4 }
|
|
|
|
hpnicfDot11RPRtsThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "byte"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current minimum size, in octets, of the MAC
|
|
protocol data unit (MPDU), below which a Request to send/Clear
|
|
to send (RTS/CTS) handshake shall not be performed."
|
|
DEFVAL { 2346 }
|
|
::= { hpnicfDot11RadioPolicyExtEntry 5 }
|
|
|
|
hpnicfDot11RPFragThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "byte"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the current maximum size, in octets, of the MPDU
|
|
that may be delivered to the PHY. A MSDU shall be broken into
|
|
fragments if its size exceeds the value of this attribute after
|
|
adding MAC headers and trailers."
|
|
DEFVAL { 2346 }
|
|
::= { hpnicfDot11RadioPolicyExtEntry 6 }
|
|
|
|
hpnicfDot11RPShortRetryThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the maximum number of transmission attempts of a
|
|
frame, the length of which is less than or equal to
|
|
hpnicfDot11RTSThreshold, that shall be made before a failure
|
|
condition is indicated."
|
|
DEFVAL { 7 }
|
|
::= { hpnicfDot11RadioPolicyExtEntry 7 }
|
|
|
|
hpnicfDot11RPLongRetryThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the maximum number of transmission attempts of a
|
|
frame, the length of which is longer than hpnicfDot11RTSThreshold,
|
|
and that shall be made before a failure condition is indicated."
|
|
DEFVAL { 4 }
|
|
::= { hpnicfDot11RadioPolicyExtEntry 8 }
|
|
|
|
hpnicfDot11RPClientMaxCount OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the maximum number of stations supported by
|
|
this radio policy."
|
|
::= { hpnicfDot11RadioPolicyExtEntry 9 }
|
|
|
|
hpnicfDot11RPBeaconIntervalCM OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "timeunit"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents beacon interval."
|
|
DEFVAL { 100 }
|
|
::= { hpnicfDot11RadioPolicyExtEntry 10 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11RadioPolicyTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11ServicePolicyPortSecurityTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11SrvPortSecurityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11SrvPortSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines the WLAN security status for ESS, BSS and
|
|
WLAN-Ethernet interface which binding the crypto service-template.
|
|
Otherwise, when binding the clear service-template,
|
|
hpnicfPortSecurityTables should be used to configure port security."
|
|
::= { hpnicfDot11PolicyConfigGroup 5 }
|
|
|
|
hpnicfDot11SrvPortSecurityEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11SrvPortSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is a row in this table for service policy."
|
|
INDEX
|
|
{
|
|
hpnicfDot11SecurityServicePolicyID
|
|
}
|
|
::= { hpnicfDot11SrvPortSecurityTable 1 }
|
|
|
|
HpnicfDot11SrvPortSecurityEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11SecurityServicePolicyID HpnicfDot11ServicePolicyIDType,
|
|
hpnicfDot11SrvPortSecurityMode INTEGER,
|
|
hpnicfDot11SrvSecurityKeyType INTEGER,
|
|
hpnicfDot11SrvSecurityPskKeyMode INTEGER,
|
|
hpnicfDot11SrvSecurityPskKeyString DisplayString,
|
|
hpnicfDot11SrvPortSecurityModeCM INTEGER
|
|
}
|
|
|
|
hpnicfDot11SecurityServicePolicyID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ServicePolicyIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the ID of each service policy."
|
|
::= { hpnicfDot11SrvPortSecurityEntry 1 }
|
|
|
|
hpnicfDot11SrvPortSecurityMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noRestrictions(1),
|
|
userLoginSecureExt(2),
|
|
psk(3),
|
|
macAddressAndPsk(4),
|
|
userLoginSecureExtOrPsk(5),
|
|
ext(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines the security modes of the WLAN port.
|
|
|
|
noRestrictions The default value, no any security mode is set.
|
|
|
|
userLoginSecureExt Access to the port is denied until the port
|
|
client is authorized (by 802.1X).
|
|
|
|
psk Access to the port is denied until the port client is
|
|
authorized (by 802.1X key negotiation).
|
|
|
|
macAddressAndPsk The MAC address is first authenticated and only if
|
|
this succeeds does the psk then attempt user authentication.
|
|
|
|
userLoginSecureExtOrPsk This selects both the userLoginSecureExt and
|
|
psk modes together such that either is allowed to authorized access.
|
|
Which mode works for client depends on the client's choice.
|
|
|
|
ext Access to the port is denied until the port client is
|
|
authenticated (by ext)."
|
|
::= { hpnicfDot11SrvPortSecurityEntry 2 }
|
|
|
|
hpnicfDot11SrvSecurityKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
userLoginTxKeyTypeNone(1),
|
|
userLoginTxKeyTypeDot11Key(2),
|
|
userLoginTxKeyTypeRsaRC4Key(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the key type in the 802.1X EAPOL_Key packet.
|
|
|
|
userLoginTxKeyTypeNone - This means the key type is not set yet.
|
|
|
|
userLoginTxKeyTypeDot11Key - This selects the 802.11 key type.
|
|
|
|
userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4
|
|
session encryption."
|
|
::= { hpnicfDot11SrvPortSecurityEntry 3 }
|
|
|
|
hpnicfDot11SrvSecurityPskKeyMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
pskKeyModeNone(1),
|
|
pskKeyModePassPhrase(2),
|
|
pskKeyModeRawKey(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the password input mode. When input as pskKeyModePassPhrase,
|
|
hpnicfDot11SrvSecurityPskKeyString must be 8 to 63 characters;
|
|
when input as pskKeyModeRawKey, hpnicfDot11SrvSecurityPskKeyString
|
|
must be 64 characters and each character must be '0'-'9', 'a'-'f' and
|
|
'A'-'F'."
|
|
::= { hpnicfDot11SrvPortSecurityEntry 4 }
|
|
|
|
hpnicfDot11SrvSecurityPskKeyString OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the password string used for psk authentication."
|
|
::= { hpnicfDot11SrvPortSecurityEntry 5 }
|
|
|
|
hpnicfDot11SrvPortSecurityModeCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
psk(1),
|
|
radius(2),
|
|
wlanex(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines the security modes of the WLAN port.
|
|
|
|
none - The default value, no any security mode is set.
|
|
|
|
psk - Access to the port is denied until the port client is
|
|
authorized (by 802.1X key negotiation).
|
|
|
|
radius - Access to the port is denied until the port
|
|
client is authorized (by 802.1X).
|
|
|
|
wlanex - Access to the port is denied until the port client is
|
|
authenticated by wlan cert."
|
|
::= { hpnicfDot11SrvPortSecurityEntry 6 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11PortSecurityTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11SrvPolicyExtendTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11SrvPolicyExtendTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11SrvPolicyExtendEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table defines the parameters of each service policy."
|
|
::= { hpnicfDot11PolicyConfigGroup 6 }
|
|
|
|
hpnicfDot11SrvPolicyExtendEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11SrvPolicyExtendEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of each service policy."
|
|
INDEX
|
|
{
|
|
hpnicfDot11ServicePolicyID
|
|
}
|
|
::= { hpnicfDot11SrvPolicyExtendTable 1 }
|
|
|
|
HpnicfDot11SrvPolicyExtendEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11SPEnable INTEGER
|
|
}
|
|
|
|
hpnicfDot11SPEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether the service policy is enabled."
|
|
::= { hpnicfDot11SrvPolicyExtendEntry 1 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11ServicePolicyExtendTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11APTemplateTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11APTemplateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11APTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By AP template CLI, administrator will configure the parameters of AP
|
|
by convenience.
|
|
Before AP boot up and connect to AC by CAPWAP tunnel, administrator
|
|
will create AP template for each AP. When AP connect to AC,
|
|
AC will assign configuration to AP by hpnicfDot11APSerialID
|
|
information in AP template."
|
|
::= { hpnicfDot11APConfigGroup 1 }
|
|
|
|
hpnicfDot11APTemplateEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11APTemplateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains configuration information for each AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11APTemplateName
|
|
}
|
|
::= { hpnicfDot11APTemplateTable 1 }
|
|
|
|
HpnicfDot11APTemplateEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11APTemplateName OCTET STRING,
|
|
hpnicfDot11APSerialID OCTET STRING,
|
|
hpnicfDot11TemplateAPModelAlias OCTET STRING,
|
|
hpnicfDot11Description OCTET STRING,
|
|
hpnicfDot11APWorkMode INTEGER,
|
|
hpnicfDot11APTemplateRowStatus RowStatus,
|
|
hpnicfDot11APName OCTET STRING,
|
|
hpnicfDot11StatisInterv Integer32,
|
|
hpnicfDot11APBroadcastProbeReply TruthValue,
|
|
hpnicfDot11StaIdleTimerInterv Integer32,
|
|
hpnicfDot11StaKeepAliveTimerInterv Integer32,
|
|
hpnicfDot11APCir Integer32,
|
|
hpnicfDot11APCbs Integer32,
|
|
hpnicfDot11APPriorityLevel Integer32,
|
|
hpnicfDot11APElementID Integer32,
|
|
hpnicfDot11APDevDetectEnable TruthValue,
|
|
hpnicfDot11APGetIPMethod INTEGER,
|
|
hpnicfDot11StatisIntervMode INTEGER,
|
|
hpnicfDot11ApTrapEnabled TruthValue,
|
|
hpnicfDot11ApFmwUpdState INTEGER,
|
|
hpnicfDot11StatisIntervModeCM INTEGER,
|
|
hpnicfDot11ApNasIDCM OCTET STRING
|
|
}
|
|
|
|
hpnicfDot11APTemplateName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the name of AP template."
|
|
::= { hpnicfDot11APTemplateEntry 1 }
|
|
|
|
hpnicfDot11APSerialID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents AP serial id."
|
|
::= { hpnicfDot11APTemplateEntry 2 }
|
|
|
|
hpnicfDot11TemplateAPModelAlias OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the alias of AP model name."
|
|
::= { hpnicfDot11APTemplateEntry 3 }
|
|
|
|
hpnicfDot11Description OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute will give more information about AP.
|
|
Administrator could suggest the location, owner or
|
|
other information for each AP.
|
|
If the value is set to NULL, the description will be removed."
|
|
::= { hpnicfDot11APTemplateEntry 4 }
|
|
|
|
hpnicfDot11APWorkMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
monitor(2),
|
|
hybrid(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents what work mode for AP.
|
|
The following values are supported:
|
|
normal - AP will supply WLAN service.
|
|
monitor - AP will be a monitor to find attack.
|
|
hybrid - AP will supply WLAN service and Device detection is
|
|
enabled."
|
|
DEFVAL { normal }
|
|
::= { hpnicfDot11APTemplateEntry 5 }
|
|
|
|
hpnicfDot11APTemplateRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11APTemplateEntry 6 }
|
|
|
|
hpnicfDot11APName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the AP name."
|
|
::= { hpnicfDot11APTemplateEntry 7 }
|
|
|
|
hpnicfDot11StatisInterv OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval of radio statistic."
|
|
::= { hpnicfDot11APTemplateEntry 8 }
|
|
|
|
hpnicfDot11APBroadcastProbeReply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents enable the AP to reply broadcast probe or not.
|
|
'true' : The AP to reply broadcast probe is enabled.
|
|
'false': The AP to reply broadcast probe is disabled"
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11APTemplateEntry 9 }
|
|
|
|
hpnicfDot11StaIdleTimerInterv OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval for which the link between AP and STA
|
|
( power-save or awake ) can be idle."
|
|
::= { hpnicfDot11APTemplateEntry 10 }
|
|
|
|
hpnicfDot11StaKeepAliveTimerInterv OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval of the keep alive requests sent between
|
|
AP and STA."
|
|
::= { hpnicfDot11APTemplateEntry 11 }
|
|
|
|
hpnicfDot11APCir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the committed information rate between AP and AC."
|
|
::= { hpnicfDot11APTemplateEntry 12 }
|
|
|
|
hpnicfDot11APCbs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the committed burst size between AP and AC."
|
|
::= { hpnicfDot11APTemplateEntry 13 }
|
|
|
|
hpnicfDot11APPriorityLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the connection priority for the AP.
|
|
If the connection priority is 7, the AC is considered as the
|
|
primary AC for the AP."
|
|
DEFVAL { 4 }
|
|
::= { hpnicfDot11APTemplateEntry 14 }
|
|
|
|
hpnicfDot11APElementID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the AP element ID."
|
|
::= { hpnicfDot11APTemplateEntry 15 }
|
|
|
|
hpnicfDot11APDevDetectEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether device detection is enabled or not.
|
|
'true' : Device detection is enabled.
|
|
'false': Device detection is disabled.
|
|
If device detection is enabled, the AP will provide both device
|
|
detection and WLAN data services.
|
|
By default, the AP only provides WLAN data services. When an AP works
|
|
in monitor mode, that is, the value of object hpnicfDot11APWorkMode is
|
|
monitor, device detection can not be enabled with object
|
|
hpnicfDot11APDevDetectEnable."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11APTemplateEntry 16 }
|
|
|
|
hpnicfDot11APGetIPMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dhcpAlloc(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the method how AP gets IP address."
|
|
DEFVAL { dhcpAlloc }
|
|
::= { hpnicfDot11APTemplateEntry 17 }
|
|
|
|
hpnicfDot11StatisIntervMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
realtime(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the mode of statics interval.
|
|
normal - statics interval value between 10s to 120s
|
|
realtime - statics interval value between 2s to 5s"
|
|
DEFVAL { normal }
|
|
::= { hpnicfDot11APTemplateEntry 18 }
|
|
|
|
hpnicfDot11ApTrapEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether the trap status is enabled or not.
|
|
'true' : Enable the trap status;
|
|
'false' : Disable the trap status."
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11APTemplateEntry 19 }
|
|
|
|
hpnicfDot11ApFmwUpdState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2),
|
|
inherit(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the status of version auto-update for an AP.
|
|
The following values are supported:
|
|
enable - AP version will be updated automatically.
|
|
disable - AP version will not be updated automatically.
|
|
inherit - The status will inherit value from apgroup-view or system-view."
|
|
DEFVAL { inherit }
|
|
::= { hpnicfDot11APTemplateEntry 20 }
|
|
|
|
hpnicfDot11StatisIntervModeCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the mode of statistic interval.
|
|
off - statistic interval value between 10s to 120s
|
|
on - statistic interval value between 2s to 5s"
|
|
DEFVAL { off }
|
|
::= { hpnicfDot11APTemplateEntry 21 }
|
|
|
|
hpnicfDot11ApNasIDCM OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the NAS-ID of current service policy for each
|
|
specific radio of AP."
|
|
::= { hpnicfDot11APTemplateEntry 22 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11APTemplateTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11RadioToConfigTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11RadioToConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RadioToConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Before AP connects to AC, administrator will configure radio
|
|
parameter to each radio."
|
|
::= { hpnicfDot11APConfigGroup 2 }
|
|
|
|
hpnicfDot11RadioToConfigEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioToConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains configuration information for each radio."
|
|
INDEX
|
|
{
|
|
hpnicfDot11APTemplateNameCfg,
|
|
hpnicfDot11CfgRadioID
|
|
}
|
|
::= { hpnicfDot11RadioToConfigTable 1 }
|
|
|
|
HpnicfDot11RadioToConfigEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11APTemplateNameCfg OCTET STRING,
|
|
hpnicfDot11CfgRadioID HpnicfDot11RadioScopeType,
|
|
hpnicfDot11CfgRadioPolicyName OCTET STRING,
|
|
hpnicfDot11CfgRadioType HpnicfDot11RadioType,
|
|
hpnicfDot11CfgChannel HpnicfDot11ChannelScopeType,
|
|
hpnicfDot11CfgMaxTxPowerLevel HpnicfDot11TxPwrLevelScopeType,
|
|
hpnicfDot11PreambleLen HpnicfDot11PreambleType,
|
|
hpnicfDot11CfgRadioStatus TruthValue,
|
|
hpnicfDot11CfgRdElementID Unsigned32,
|
|
hpnicfDot11CfgWorkMode HpnicfDot11WorkMode,
|
|
hpnicfDot11CfgPwrAttValue Integer32,
|
|
hpnicfDot11RadioTxArithmetic INTEGER,
|
|
hpnicfDot11CfgChannelLockStat INTEGER,
|
|
hpnicfDot11CfgPowerLockStat INTEGER,
|
|
hpnicfDot11CfgLBRdGroupId Unsigned32,
|
|
hpnicfDot11CfgRRMSDRdGroupId Unsigned32,
|
|
hpnicfDot11CfgRadioType2 HpnicfDot11RadioType2,
|
|
hpnicfDot11CfgIDSEnable TruthValue,
|
|
hpnicfDot11CfgSaEnable TruthValue,
|
|
hpnicfDot11CfgSaCltRtFFTData TruthValue,
|
|
hpnicfDot11CfgSaBand INTEGER
|
|
}
|
|
|
|
hpnicfDot11APTemplateNameCfg OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the name of AP template."
|
|
::= { hpnicfDot11RadioToConfigEntry 1 }
|
|
|
|
hpnicfDot11CfgRadioID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioScopeType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents each radio."
|
|
::= { hpnicfDot11RadioToConfigEntry 2 }
|
|
|
|
hpnicfDot11CfgRadioPolicyName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the name of radio policy."
|
|
::= { hpnicfDot11RadioToConfigEntry 3 }
|
|
|
|
hpnicfDot11CfgRadioType OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio will work with which 802.11 radio type."
|
|
::= { hpnicfDot11RadioToConfigEntry 4 }
|
|
|
|
hpnicfDot11CfgChannel OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ChannelScopeType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the channel allocation of radio."
|
|
::= { hpnicfDot11RadioToConfigEntry 5 }
|
|
|
|
hpnicfDot11CfgMaxTxPowerLevel OBJECT-TYPE
|
|
SYNTAX HpnicfDot11TxPwrLevelScopeType
|
|
UNITS "dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the maximal transmit power scope for AP."
|
|
::= { hpnicfDot11RadioToConfigEntry 6 }
|
|
|
|
hpnicfDot11PreambleLen OBJECT-TYPE
|
|
SYNTAX HpnicfDot11PreambleType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether use long or short preamble for 802.11 MAC
|
|
frame.
|
|
When hpnicfDot11CfgRadioType is either dot11b or dot11g,
|
|
then value for hpnicfDot11PreambleLen will be valid.
|
|
Otherwise, the value for it will be invalid."
|
|
DEFVAL { short }
|
|
::= { hpnicfDot11RadioToConfigEntry 7 }
|
|
|
|
hpnicfDot11CfgRadioStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio admin status whether is enabled
|
|
or disabled."
|
|
::= { hpnicfDot11RadioToConfigEntry 8 }
|
|
|
|
hpnicfDot11CfgRdElementID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the element ID of this radio. It comprises two parts.
|
|
The highest 24 bits are AP element ID and the lowest 8 bits are
|
|
radio ID."
|
|
::= { hpnicfDot11RadioToConfigEntry 9 }
|
|
|
|
hpnicfDot11CfgWorkMode OBJECT-TYPE
|
|
SYNTAX HpnicfDot11WorkMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents work mode of the radio."
|
|
::= { hpnicfDot11RadioToConfigEntry 10 }
|
|
|
|
hpnicfDot11CfgPwrAttValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the value of power attenuation."
|
|
::= { hpnicfDot11RadioToConfigEntry 11 }
|
|
|
|
hpnicfDot11RadioTxArithmetic OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
quality(1),
|
|
bandwidth(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the transmission arithmetic of the radio.
|
|
The following values are supported:
|
|
quality - Consider the quality first during the transmission.
|
|
bandwidth - Consider the bandwidth first during the transmission."
|
|
DEFVAL { quality }
|
|
::= { hpnicfDot11RadioToConfigEntry 12 }
|
|
|
|
hpnicfDot11CfgChannelLockStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unlocked(1),
|
|
locked(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents locked status of channel on the radio."
|
|
DEFVAL { unlocked }
|
|
::= { hpnicfDot11RadioToConfigEntry 13 }
|
|
|
|
hpnicfDot11CfgPowerLockStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unlocked(1),
|
|
locked(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents locked status of power on the radio."
|
|
DEFVAL { unlocked }
|
|
::= { hpnicfDot11RadioToConfigEntry 14 }
|
|
|
|
hpnicfDot11CfgLBRdGroupId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the load balance group ID allocated for the radio."
|
|
::= { hpnicfDot11RadioToConfigEntry 15 }
|
|
|
|
hpnicfDot11CfgRRMSDRdGroupId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the RRM self-decisive group ID allocated for the radio."
|
|
::= { hpnicfDot11RadioToConfigEntry 16 }
|
|
|
|
hpnicfDot11CfgRadioType2 OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioType2
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio will work with which 802.11 radio type."
|
|
::= { hpnicfDot11RadioToConfigEntry 17 }
|
|
|
|
hpnicfDot11CfgIDSEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether intrusion detection is enabled for this radio."
|
|
::= { hpnicfDot11RadioToConfigEntry 18 }
|
|
|
|
hpnicfDot11CfgSaEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether spectrum analysis is enabled."
|
|
::= { hpnicfDot11RadioToConfigEntry 19 }
|
|
|
|
hpnicfDot11CfgSaCltRtFFTData OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether to collect real-time FFT data for this radio."
|
|
::= { hpnicfDot11RadioToConfigEntry 20 }
|
|
|
|
hpnicfDot11CfgSaBand OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
dot11g(1),
|
|
dot11aLower(2),
|
|
dot11aMiddle(3),
|
|
dot11aUpper(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents which band of channels will be monitored when collection
|
|
real-time FFT data is enabled for this radio. Detection of
|
|
interference devices and air quality will also be affected. Each band
|
|
responds to the following channels.
|
|
dot11g (Channels 1-14)
|
|
dot11aLower (channels 36-64)
|
|
dot11aMiddle (channels 100-140)
|
|
dot11aUpper (channels 149-165)."
|
|
::= { hpnicfDot11RadioToConfigEntry 21 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11RadioToConfigTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11APServiceSetTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11APServiceSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11APServiceSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For each radio, it could configure multiple service policies.
|
|
The table describes the relationship between radio and
|
|
service policies."
|
|
::= { hpnicfDot11APConfigGroup 3 }
|
|
|
|
hpnicfDot11APServiceSetEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11APServiceSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains service policy information for each
|
|
specific radio of AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11APTemplateNameCfg,
|
|
hpnicfDot11CfgRadioID,
|
|
hpnicfDot11CfgServicePolicyID
|
|
}
|
|
::= { hpnicfDot11APServiceSetTable 1 }
|
|
|
|
HpnicfDot11APServiceSetEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11CfgServicePolicyID HpnicfDot11ServicePolicyIDType,
|
|
hpnicfDot11SrvSetRowStatus RowStatus,
|
|
hpnicfDot11ServiceSetVlanId Integer32
|
|
}
|
|
|
|
hpnicfDot11CfgServicePolicyID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ServicePolicyIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the ID of each service policy used by the AP."
|
|
::= { hpnicfDot11APServiceSetEntry 1 }
|
|
|
|
hpnicfDot11SrvSetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11APServiceSetEntry 2 }
|
|
|
|
hpnicfDot11ServiceSetVlanId OBJECT-TYPE
|
|
SYNTAX Integer32(0..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Vlan ID of BSS which is generated when service policy
|
|
is binded with the Radio."
|
|
::= { hpnicfDot11APServiceSetEntry 3 }
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11APServiceSetTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11APSTVlanTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11APSTVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11APSTVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For each service policy, it could be bind to several VLANs.
|
|
The table describes the relationship between VLAN and
|
|
service policies."
|
|
::= { hpnicfDot11APConfigGroup 11 }
|
|
|
|
hpnicfDot11APSTVlanEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11APSTVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains VLAN and service policy information for each
|
|
specific radio of AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11SIDAPSerialID,
|
|
hpnicfDot11CfgRadioID,
|
|
hpnicfDot11CfgServicePolicyID
|
|
}
|
|
::= { hpnicfDot11APSTVlanTable 1 }
|
|
|
|
HpnicfDot11APSTVlanEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11CfgSTVLANID Integer32,
|
|
hpnicfDot11CfgSTNASPortID OCTET STRING,
|
|
hpnicfDot11CfgServiceSetRowStatus RowStatus,
|
|
hpnicfDot11CfgSTNASID OCTET STRING
|
|
}
|
|
|
|
hpnicfDot11CfgSTVLANID OBJECT-TYPE
|
|
SYNTAX Integer32(0..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the VLAN that current Service Policy have bind to."
|
|
::= { hpnicfDot11APSTVlanEntry 1 }
|
|
|
|
hpnicfDot11CfgSTNASPortID OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the NAS Port ID of current Service Policy for each
|
|
specific radio of AP."
|
|
::= { hpnicfDot11APSTVlanEntry 2 }
|
|
|
|
hpnicfDot11CfgServiceSetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11APSTVlanEntry 3 }
|
|
|
|
hpnicfDot11CfgSTNASID OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the NAS ID of current Service Policy for each
|
|
specific radio of AP."
|
|
::= { hpnicfDot11APSTVlanEntry 4 }
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11APSTVlanTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11APSysInfoSetTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11APSysInfoSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11APSysInfoSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of the system information for each AP."
|
|
::= { hpnicfDot11APConfigGroup 4 }
|
|
|
|
hpnicfDot11APSysInfoSetEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11APSysInfoSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system information configuration for each AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11SIDAPSerialID
|
|
}
|
|
::= { hpnicfDot11APSysInfoSetTable 1 }
|
|
|
|
HpnicfDot11APSysInfoSetEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11APSysNetID OCTET STRING,
|
|
hpnicfDot11APCpuUsageThreshold Integer32,
|
|
hpnicfDot11APMemUsageThreshold Integer32
|
|
}
|
|
|
|
hpnicfDot11APSysNetID OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the system Net ID for AP."
|
|
::= { hpnicfDot11APSysInfoSetEntry 1 }
|
|
|
|
hpnicfDot11APCpuUsageThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
UNITS "onepercent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CPU usage threshold for AP."
|
|
::= { hpnicfDot11APSysInfoSetEntry 2 }
|
|
|
|
hpnicfDot11APMemUsageThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
UNITS "onepercent"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The memory usage threshold for AP."
|
|
::= { hpnicfDot11APSysInfoSetEntry 3 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11APSysInfoSetTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11APLimitTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11APLimitTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11APLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For each connected APs, administrator could configure a series of
|
|
limits. This table describes the limit information for AP(s)."
|
|
::= { hpnicfDot11APConfigGroup 5 }
|
|
|
|
hpnicfDot11APLimitEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11APLimitEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the limit information for each AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11APElementIndex
|
|
}
|
|
::= { hpnicfDot11APLimitTable 1 }
|
|
|
|
HpnicfDot11APLimitEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11APSsidNumLimit Integer32,
|
|
hpnicfDot11APUserCntLimit Integer32,
|
|
hpnicfDot11APUserThreshold Integer32
|
|
}
|
|
|
|
hpnicfDot11APSsidNumLimit OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the upper limit of service template binded
|
|
with this AP. All radios of AP share this limit.
|
|
Default value 0 : There is no upper limit of service template
|
|
binded with this AP."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11APLimitEntry 1 }
|
|
|
|
hpnicfDot11APUserCntLimit OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the upper limit of user which has access to this AP.
|
|
All BSSs binded with AP share this limit.
|
|
Default value 0 : There is no upper limit of user which has access
|
|
to this AP."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11APLimitEntry 2 }
|
|
|
|
hpnicfDot11APUserThreshold OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the threshold of user which has access to this
|
|
AP. All BSSs binded with AP share this limit. If the user counter
|
|
is overflow, the trap will be sent.
|
|
Default value 0 : There is no threshold of user which has access
|
|
to this AP."
|
|
DEFVAL { 0 }
|
|
::= { hpnicfDot11APLimitEntry 3 }
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11APLimitTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11APIfSetTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11APIfSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11APIfSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of the interface information for each AP."
|
|
::= { hpnicfDot11APConfigGroup 6 }
|
|
|
|
hpnicfDot11APIfSetEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11APIfSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface information configuration for each AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11APElementIndex,
|
|
hpnicfDot11APSetIfIndex
|
|
}
|
|
::= { hpnicfDot11APIfSetTable 1 }
|
|
|
|
HpnicfDot11APIfSetEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11APSetIfIndex Integer32,
|
|
hpnicfDot11APIfAlias DisplayString
|
|
}
|
|
|
|
hpnicfDot11APSetIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the index for a interface."
|
|
::= { hpnicfDot11APIfSetEntry 1 }
|
|
|
|
hpnicfDot11APIfAlias OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is an 'alias' name for the interface as specified
|
|
by a network manager for AP."
|
|
::= { hpnicfDot11APIfSetEntry 2 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11APIfSetTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11APServiceVlanTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11APServiceVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11APServiceVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For all the radios on the AP, it could configure multiple service policies.
|
|
The table describes the relationship between AP and
|
|
service policies."
|
|
::= { hpnicfDot11APConfigGroup 7 }
|
|
|
|
hpnicfDot11APServiceVlanEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11APServiceVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains service policy information for each AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11APServiceVlanSerialID,
|
|
hpnicfDot11APServiceVlanSPID
|
|
}
|
|
::= { hpnicfDot11APServiceVlanTable 1 }
|
|
|
|
HpnicfDot11APServiceVlanEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11APServiceVlanSerialID OCTET STRING,
|
|
hpnicfDot11APServiceVlanSPID HpnicfDot11ServicePolicyIDType,
|
|
hpnicfDot11APServiceVlanId Integer32,
|
|
hpnicfDot11APServiceVlanRowStatus RowStatus
|
|
|
|
}
|
|
|
|
hpnicfDot11APServiceVlanSerialID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents AP serial id."
|
|
::= { hpnicfDot11APServiceVlanEntry 1 }
|
|
|
|
hpnicfDot11APServiceVlanSPID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ServicePolicyIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the ID of each service policy used by the AP."
|
|
::= { hpnicfDot11APServiceVlanEntry 2 }
|
|
|
|
hpnicfDot11APServiceVlanId OBJECT-TYPE
|
|
SYNTAX Integer32(0..4094)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the VLAN ID of BSS which is generated when the
|
|
service policy is bound to the radio."
|
|
::= { hpnicfDot11APServiceVlanEntry 3 }
|
|
|
|
hpnicfDot11APServiceVlanRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the status of this table entry."
|
|
::= { hpnicfDot11APServiceVlanEntry 4 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11APServiceSetTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11RadioConfigTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11RadioConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RadioConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Before AP connects to AC, administrator will configure radio
|
|
parameter to each radio."
|
|
::= { hpnicfDot11APConfigGroup 8 }
|
|
|
|
hpnicfDot11RadioConfigEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains configuration information for each radio."
|
|
INDEX
|
|
{
|
|
hpnicfDot11RCAPSerialID,
|
|
hpnicfDot11RCRadioID
|
|
}
|
|
::= { hpnicfDot11RadioConfigTable 1 }
|
|
|
|
HpnicfDot11RadioConfigEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11RCAPSerialID OCTET STRING,
|
|
hpnicfDot11RCRadioID HpnicfDot11RadioScopeType,
|
|
hpnicfDot11RCRadioType HpnicfDot11RadioType,
|
|
hpnicfDot11RCChannel HpnicfDot11ChannelScopeType,
|
|
hpnicfDot11RCPreambleLen HpnicfDot11PreambleType,
|
|
hpnicfDot11RCPwrAttValue Integer32,
|
|
hpnicfDot11RCApPowerLevel HpnicfDot11TxPwrLevelScopeType,
|
|
hpnicfDot11RCDynamicChlState TruthValue,
|
|
hpnicfDot11RCDynamicPowerState TruthValue,
|
|
hpnicfDot11RCRadioStatus TruthValue,
|
|
hpnicfDot11RCRadioRate OCTET STRING,
|
|
hpnicfDot11RCPwrAdjustStepLength Integer32,
|
|
hpnicfDot11RCRadioType2 HpnicfDot11RadioType2,
|
|
hpnicfDot11RCPreambleLenCM INTEGER,
|
|
hpnicfDot11RCDynamicChlStateCM INTEGER,
|
|
hpnicfDot11RCRadioStatusCM INTEGER,
|
|
hpnicfDot11RCRadioRateCM OCTET STRING,
|
|
hpnicfDot11RCDynamicPowerStateCM HpnicfDot11TruthValueCM,
|
|
hpnicfDot11RCRssiThresholdCM Integer32
|
|
}
|
|
|
|
hpnicfDot11RCAPSerialID OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..127))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Serial ID of AP."
|
|
::= { hpnicfDot11RadioConfigEntry 1 }
|
|
|
|
hpnicfDot11RCRadioID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioScopeType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents each radio."
|
|
::= { hpnicfDot11RadioConfigEntry 2 }
|
|
|
|
hpnicfDot11RCRadioType OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the radio will work with which 802.11 radio
|
|
type."
|
|
::= { hpnicfDot11RadioConfigEntry 3 }
|
|
|
|
hpnicfDot11RCChannel OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ChannelScopeType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the channel allocation of radio."
|
|
::= { hpnicfDot11RadioConfigEntry 4 }
|
|
|
|
hpnicfDot11RCPreambleLen OBJECT-TYPE
|
|
SYNTAX HpnicfDot11PreambleType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether use long or short preamble for 802.11
|
|
MAC frame.
|
|
When hpnicfDot11CfgRadioType is either dot11b or dot11g,
|
|
then value for hpnicfDot11PreambleLen will be valid.
|
|
Otherwise, the value for it will be invalid."
|
|
DEFVAL { short }
|
|
::= { hpnicfDot11RadioConfigEntry 5 }
|
|
|
|
hpnicfDot11RCPwrAttValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value of power attenuation."
|
|
::= { hpnicfDot11RadioConfigEntry 6 }
|
|
|
|
hpnicfDot11RCApPowerLevel OBJECT-TYPE
|
|
SYNTAX HpnicfDot11TxPwrLevelScopeType
|
|
UNITS "dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the maximal transmit power scope for AP."
|
|
::= { hpnicfDot11RadioConfigEntry 7 }
|
|
|
|
hpnicfDot11RCDynamicChlState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable dynamic channel selection."
|
|
::= { hpnicfDot11RadioConfigEntry 8 }
|
|
|
|
hpnicfDot11RCDynamicPowerState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable dynamic power selection for the band."
|
|
::= { hpnicfDot11RadioConfigEntry 9 }
|
|
|
|
hpnicfDot11RCRadioStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio admin status whether is enabled
|
|
or disabled."
|
|
::= { hpnicfDot11RadioConfigEntry 10 }
|
|
|
|
hpnicfDot11RCRadioRate OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set data transmit rates for the radio, in the format of 1,2,5.5...
|
|
For 802.11n radios, the format can be MCS X. The data transmit rates
|
|
between AP and STA must fall into the configured rates.
|
|
(Note: For 802.11n radios, the first value will be treated as a mandatory rate,
|
|
and the second value will be treated as a supported rate.
|
|
If you configure more than two rates, the configuration cannot take effect.
|
|
If you configure only one rate, it is considered as the mandatory rate by default.)"
|
|
::= { hpnicfDot11RadioConfigEntry 11 }
|
|
|
|
hpnicfDot11RCPwrAdjustStepLength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Power adjustment step-length in dBm."
|
|
::= { hpnicfDot11RadioConfigEntry 12 }
|
|
|
|
hpnicfDot11RCRadioType2 OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioType2
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the radio will work with which 802.11 radio
|
|
type."
|
|
::= { hpnicfDot11RadioConfigEntry 13 }
|
|
|
|
hpnicfDot11RCPreambleLenCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
long(0),
|
|
short(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents whether use long or short preamble for 802.11
|
|
MAC frame.
|
|
When hpnicfDot11CfgRadioType is either dot11b or dot11g,
|
|
then value for hpnicfDot11PreambleLenCM will be valid.
|
|
Otherwise, the value for it will be invalid."
|
|
DEFVAL { short }
|
|
::= { hpnicfDot11RadioConfigEntry 14 }
|
|
|
|
hpnicfDot11RCDynamicChlStateCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/Disable dynamic channel selection."
|
|
::= { hpnicfDot11RadioConfigEntry 15 }
|
|
|
|
hpnicfDot11RCRadioStatusCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up(1),
|
|
down(2),
|
|
testing(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio admin status whether is enabled
|
|
or disabled."
|
|
::= { hpnicfDot11RadioConfigEntry 16 }
|
|
|
|
hpnicfDot11RCRadioRateCM OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set data transmit rates for the radio, in the format of 1,2,5.5...
|
|
For 802.11n radios, the format of each value can be MCS X. The data transmit
|
|
rates between AP and client should be one of the configured rates.
|
|
(Note: For 802.11n radios, the first value is mandatory rate, and the second
|
|
value is supported rate. If more than two rate values are configured, the
|
|
configuration will not take effect. If only one rate value is configured,
|
|
the mandatory rate will be set to the default value.)"
|
|
::= { hpnicfDot11RadioConfigEntry 17 }
|
|
|
|
hpnicfDot11RCDynamicPowerStateCM OBJECT-TYPE
|
|
SYNTAX HpnicfDot11TruthValueCM
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable dynamic power selection for the band."
|
|
::= { hpnicfDot11RadioConfigEntry 18 }
|
|
|
|
hpnicfDot11RCRssiThresholdCM OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the minimum value of the RSSI.
|
|
The clients with RSSI below this value will be refused to associate."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot11RadioConfigEntry 19 }
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11RadioConfigTable Definition
|
|
-- *****************************************************************************
|
|
|
|
hpnicfDot11RadioSSIDCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RadioSSIDCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For each radio, it could configure multiple service policies.
|
|
The table describes the relationship between radio and
|
|
service policies."
|
|
::= { hpnicfDot11APConfigGroup 9 }
|
|
|
|
hpnicfDot11RadioSSIDCfgEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioSSIDCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains SSID configuration information for each radio."
|
|
INDEX
|
|
{
|
|
hpnicfDot11RadioSSIDSerialID,
|
|
hpnicfDot11RadioSSIDRadioID,
|
|
hpnicfDot11RadioSSIDWLANID
|
|
}
|
|
::= { hpnicfDot11RadioSSIDCfgTable 1 }
|
|
|
|
HpnicfDot11RadioSSIDCfgEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11RadioSSIDSerialID HpnicfDot11ObjectIDType,
|
|
hpnicfDot11RadioSSIDRadioID HpnicfDot11RadioScopeType,
|
|
hpnicfDot11RadioSSIDWLANID Integer32,
|
|
hpnicfDot11RadioSSIDIndex HpnicfDot11ServicePolicyIDType,
|
|
hpnicfDot11RadioBSSID MacAddress,
|
|
hpnicfDot11RadioSSIDRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11RadioSSIDSerialID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ObjectIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the serial ID of AP."
|
|
::= { hpnicfDot11RadioSSIDCfgEntry 1 }
|
|
|
|
hpnicfDot11RadioSSIDRadioID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioScopeType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents each radio."
|
|
::= { hpnicfDot11RadioSSIDCfgEntry 2 }
|
|
|
|
hpnicfDot11RadioSSIDWLANID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the WLAN ID of the BSSID."
|
|
::= { hpnicfDot11RadioSSIDCfgEntry 3 }
|
|
|
|
hpnicfDot11RadioSSIDIndex OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ServicePolicyIDType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the ID of each service policy used by the
|
|
radio."
|
|
::= { hpnicfDot11RadioSSIDCfgEntry 4 }
|
|
|
|
hpnicfDot11RadioBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"As MAC address format, it is used to identify BSS."
|
|
::= { hpnicfDot11RadioSSIDCfgEntry 5 }
|
|
|
|
hpnicfDot11RadioSSIDRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RowStatus."
|
|
::= { hpnicfDot11RadioSSIDCfgEntry 6 }
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11APSerialIDTable Definition
|
|
-- *****************************************************************************
|
|
|
|
hpnicfDot11APSerialIDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11APSerialIDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table will provide the general information about APs."
|
|
::= { hpnicfDot11APConfigGroup 10 }
|
|
|
|
hpnicfDot11APSerialIDEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11APSerialIDEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the general information of an AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11SIDAPSerialID
|
|
}
|
|
::= { hpnicfDot11APSerialIDTable 1 }
|
|
|
|
HpnicfDot11APSerialIDEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11SIDAPSerialID OCTET STRING,
|
|
hpnicfDot11SIDAPWorkMode INTEGER,
|
|
hpnicfDot11SIDAPGetIPMethod INTEGER,
|
|
hpnicfDot11SIDAPTemplateName OCTET STRING,
|
|
hpnicfDot11SIDModelAlias OCTET STRING,
|
|
hpnicfDot11SIDAPDescription OCTET STRING,
|
|
hpnicfDot11SIDRowStatus RowStatus,
|
|
hpnicfDot11SIDAPName OCTET STRING,
|
|
hpnicfDot11SIDStatisInterv Integer32,
|
|
hpnicfDot11SIDAPBroadcastProbeReply TruthValue,
|
|
hpnicfDot11SIDAPStaIdleTimerInterv Integer32,
|
|
hpnicfDot11SIDStaKeepAliveTimerInterv Integer32,
|
|
hpnicfDot11SIDAPCir Integer32,
|
|
hpnicfDot11SIDAPCbs Integer32,
|
|
hpnicfDot11SIDAPPriorityLevel Integer32,
|
|
hpnicfDot11SIDAPElementID Integer32,
|
|
hpnicfDot11SIDAPDevDetectEnable TruthValue,
|
|
hpnicfDot11SIDAPStatisIntervMode INTEGER,
|
|
hpnicfDot11SIDAPWorkModeCM INTEGER
|
|
}
|
|
|
|
hpnicfDot11SIDAPSerialID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents AP serial id."
|
|
::= { hpnicfDot11APSerialIDEntry 1 }
|
|
|
|
hpnicfDot11SIDAPWorkMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
monitor(2),
|
|
hybrid(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents what work mode for AP.
|
|
The following values are supported:
|
|
normal - AP will supply WLAN service.
|
|
monitor - AP will be a monitor to find attack.
|
|
hybrid - AP will supply WLAN service and Device detection is
|
|
enabled."
|
|
DEFVAL { normal }
|
|
::= { hpnicfDot11APSerialIDEntry 2 }
|
|
|
|
hpnicfDot11SIDAPGetIPMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dhcpAlloc(1),
|
|
static(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the method how AP gets IP address."
|
|
DEFVAL { dhcpAlloc }
|
|
::= { hpnicfDot11APSerialIDEntry 3 }
|
|
hpnicfDot11SIDAPTemplateName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the name of AP template."
|
|
::= { hpnicfDot11APSerialIDEntry 4 }
|
|
hpnicfDot11SIDModelAlias OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the alias of AP model name."
|
|
::= { hpnicfDot11APSerialIDEntry 5 }
|
|
|
|
hpnicfDot11SIDAPDescription OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute will give more information about AP.
|
|
Administrator could suggest the location, owner or
|
|
other information for each AP.
|
|
If the value is set to NULL, the description will be removed."
|
|
::= { hpnicfDot11APSerialIDEntry 6 }
|
|
|
|
hpnicfDot11SIDRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11APSerialIDEntry 7 }
|
|
|
|
hpnicfDot11SIDAPName OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the AP name."
|
|
::= { hpnicfDot11APSerialIDEntry 8 }
|
|
|
|
hpnicfDot11SIDStatisInterv OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval of radio statistic."
|
|
::= { hpnicfDot11APSerialIDEntry 9 }
|
|
|
|
hpnicfDot11SIDAPBroadcastProbeReply OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents enable the AP to reply broadcast probe or not.
|
|
'true' : The AP to reply broadcast probe is enabled.
|
|
'false': The AP to reply broadcast probe is disabled"
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11APSerialIDEntry 10 }
|
|
|
|
hpnicfDot11SIDAPStaIdleTimerInterv OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval for which the link between AP and STA
|
|
( power-save or awake ) can be idle."
|
|
::= { hpnicfDot11APSerialIDEntry 11 }
|
|
|
|
hpnicfDot11SIDStaKeepAliveTimerInterv OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval of the keep alive requests sent between
|
|
AP and STA."
|
|
::= { hpnicfDot11APSerialIDEntry 12 }
|
|
|
|
hpnicfDot11SIDAPCir OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Kbps"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the committed information rate between AP and AC."
|
|
::= { hpnicfDot11APSerialIDEntry 13 }
|
|
|
|
hpnicfDot11SIDAPCbs OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Bytes"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the committed burst size between AP and AC."
|
|
::= { hpnicfDot11APSerialIDEntry 14 }
|
|
|
|
hpnicfDot11SIDAPPriorityLevel OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the connection priority for the AP.
|
|
If the connection priority is 7, the AC is considered as the
|
|
primary AC for the AP."
|
|
DEFVAL { 4 }
|
|
::= { hpnicfDot11APSerialIDEntry 15 }
|
|
|
|
hpnicfDot11SIDAPElementID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the AP element ID."
|
|
::= { hpnicfDot11APSerialIDEntry 16 }
|
|
|
|
hpnicfDot11SIDAPDevDetectEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether device detection is enabled or not.
|
|
'true' : Device detection is enabled.
|
|
'false': Device detection is disabled.
|
|
If device detection is enabled, the AP will provide both device
|
|
detection and WLAN data services.
|
|
By default, the AP only provides WLAN data services. When an AP works
|
|
in monitor mode, that is, the value of object hpnicfDot11APWorkMode is
|
|
monitor, device detection can not be enabled with object
|
|
hpnicfDot11SIDAPDevDetectEnable."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11APSerialIDEntry 17 }
|
|
|
|
hpnicfDot11SIDAPStatisIntervMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
realtime(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the mode of statics interval.
|
|
normal - statics interval value between 10s to 120s
|
|
realtime - statics interval value between 2s to 5s"
|
|
DEFVAL { normal }
|
|
::= { hpnicfDot11APSerialIDEntry 18 }
|
|
|
|
hpnicfDot11SIDAPWorkModeCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(0),
|
|
monitor(1),
|
|
semimonitor(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents what work mode for AP.
|
|
The following values are supported:
|
|
normal - AP will supply WLAN service.
|
|
monitor - AP will be a monitor to find attack.
|
|
SemiMonitor - AP will supply WLAN service and Device detection is
|
|
enabled."
|
|
DEFVAL { normal }
|
|
::= { hpnicfDot11APSerialIDEntry 19 }
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11RadioIntfConfigTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11RadioIntfConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RadioIntfConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table defines the parameters for radio in AP, as per
|
|
radio."
|
|
::= { hpnicfDot11RadioIntfConfigGroup 1 }
|
|
|
|
hpnicfDot11RadioIntfConfigEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioIntfConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains information of each radio in AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11RadioIfIdx
|
|
}
|
|
::= { hpnicfDot11RadioIntfConfigTable 1 }
|
|
|
|
HpnicfDot11RadioIntfConfigEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11RadioIfIdx Integer32,
|
|
hpnicfDot11RadioCfgBeaconIntvl Integer32,
|
|
hpnicfDot11RadioCfgDtimIntvl Integer32,
|
|
hpnicfDot11RadioCfgRtsThreshold Integer32,
|
|
hpnicfDot11RadioCfgFragThreshold Integer32,
|
|
hpnicfDot11RadioCfgShtRetryThld Integer32,
|
|
hpnicfDot11RadioCfglongRtrThld Integer32,
|
|
hpnicfDot11RadioCfgMaxRxLifetime Unsigned32,
|
|
hpnicfDot11RadioCfgType HpnicfDot11RadioType,
|
|
hpnicfDot11RadioCfgChannel HpnicfDot11ChannelScopeType,
|
|
hpnicfDot11RadioCfgMaxTxPwrLvl HpnicfDot11TxPwrLevelScopeType,
|
|
hpnicfDot11RadioCfgPreambleLen HpnicfDot11PreambleType,
|
|
hpnicfDot11RadioCfgWorkMode HpnicfDot11WorkMode,
|
|
hpnicfDot11RadioCfgOnly11gEnable TruthValue,
|
|
hpnicfDot11RadioCfgType2 HpnicfDot11RadioType2,
|
|
hpnicfDot11RadioCfgRssithresholdCM Integer32
|
|
}
|
|
|
|
hpnicfDot11RadioIfIdx OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Radio IfIndex of radio in AP."
|
|
::= { hpnicfDot11RadioIntfConfigEntry 1 }
|
|
|
|
hpnicfDot11RadioCfgBeaconIntvl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "TU"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the interval for Beacon management frame."
|
|
DEFVAL { 100 }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 2 }
|
|
|
|
hpnicfDot11RadioCfgDtimIntvl OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the number of beacon intervals that shall elapse
|
|
between transmission of Beacons frames containing a Traffic
|
|
Indication Map (TIM) element whose DTIM Count field is 0.
|
|
This value is transmitted in the Delivery TIM (DTIM) Period
|
|
field of Beacon frames."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 3 }
|
|
|
|
hpnicfDot11RadioCfgRtsThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Byte"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the current minimum size,in octets,of the MAC
|
|
protocol data unit (MPDU), below which a Request to send/Clear
|
|
to send (RTS/CTS) handshake shall not be performed."
|
|
DEFVAL { 2346 }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 4 }
|
|
|
|
hpnicfDot11RadioCfgFragThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "Byte"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the current maximum size, in octets, of the MPDU that
|
|
may be delivered to the PHY. A MSDU shall be broken into
|
|
fragments if its size exceeds the value of this attribute after
|
|
adding MAC headers and trailers."
|
|
DEFVAL { 2346 }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 5 }
|
|
|
|
hpnicfDot11RadioCfgShtRetryThld OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the maximum number of transmission attempts of a
|
|
frame, the length of which is less than or equal to
|
|
hpnicfDot11RadioRTSThreshold, that shall be made before a failure
|
|
condition is indicated."
|
|
DEFVAL { 5 }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 6 }
|
|
|
|
hpnicfDot11RadioCfglongRtrThld OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the maximum number of transmission attempts of a
|
|
frame, the length of which is longer than
|
|
hpnicfDot11RadioRTSThreshold, that shall be made before a
|
|
failure condition is indicated."
|
|
DEFVAL { 5 }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 7 }
|
|
|
|
hpnicfDot11RadioCfgMaxRxLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "millisecond"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the elapsed time. After the time specified by
|
|
hpnicfDot11RadioCfgMaxRxLifetime, the further attempts to reassemble
|
|
the MSDU shall be terminated."
|
|
DEFVAL { 2000 }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 8 }
|
|
|
|
hpnicfDot11RadioCfgType OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio will work with which 802.11 radio type."
|
|
::= { hpnicfDot11RadioIntfConfigEntry 9 }
|
|
|
|
hpnicfDot11RadioCfgChannel OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ChannelScopeType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the channel allocation of radio."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 10 }
|
|
|
|
hpnicfDot11RadioCfgMaxTxPwrLvl OBJECT-TYPE
|
|
SYNTAX HpnicfDot11TxPwrLevelScopeType
|
|
UNITS "dbm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the maximal transmit power scope for AP."
|
|
::= { hpnicfDot11RadioIntfConfigEntry 11 }
|
|
|
|
hpnicfDot11RadioCfgPreambleLen OBJECT-TYPE
|
|
SYNTAX HpnicfDot11PreambleType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether use long or short preamble for 802.11 MAC
|
|
frame."
|
|
DEFVAL { short }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 12 }
|
|
|
|
hpnicfDot11RadioCfgWorkMode OBJECT-TYPE
|
|
SYNTAX HpnicfDot11WorkMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents work mode of the radio."
|
|
::= { hpnicfDot11RadioIntfConfigEntry 13 }
|
|
|
|
hpnicfDot11RadioCfgOnly11gEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents whether enable only 802.11g radio mode or not.
|
|
'true' : Only 802.11g radio mode is enabled.
|
|
'false': Only 802.11g radio mode is disabled."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 14 }
|
|
|
|
hpnicfDot11RadioCfgType2 OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioType2
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio will work with which 802.11 radio type."
|
|
::= { hpnicfDot11RadioIntfConfigEntry 15 }
|
|
|
|
hpnicfDot11RadioCfgRssithresholdCM OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "dBm"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the minimum value of the RSSI.
|
|
The clients with RSSI below this value will be refused to associate."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot11RadioIntfConfigEntry 16 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11RadioIntfConfigTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11RadioIntfBindTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11RadioIntfBindTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RadioIntfBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table defines the binding information for each radio in AP.
|
|
"
|
|
::= { hpnicfDot11RadioIntfConfigGroup 2 }
|
|
|
|
hpnicfDot11RadioIntfBindEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioIntfBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the radio interface binding information
|
|
in AP."
|
|
INDEX
|
|
{
|
|
hpnicfDot11RadioIfIdx,
|
|
hpnicfDot11RadioIntfBindSvcPlcyID
|
|
}
|
|
::= { hpnicfDot11RadioIntfBindTable 1 }
|
|
|
|
HpnicfDot11RadioIntfBindEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11RadioIntfBindSvcPlcyID HpnicfDot11ServicePolicyIDType,
|
|
hpnicfDot11RadioIntfBindIfIdx Unsigned32,
|
|
hpnicfDot11RadioIntfBindRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11RadioIntfBindSvcPlcyID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ServicePolicyIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the ID of each service policy."
|
|
::= { hpnicfDot11RadioIntfBindEntry 1 }
|
|
|
|
hpnicfDot11RadioIntfBindIfIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the Ifindex of interface which is binded to
|
|
the radio."
|
|
::= { hpnicfDot11RadioIntfBindEntry 2 }
|
|
|
|
hpnicfDot11RadioIntfBindRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this table entry."
|
|
::= { hpnicfDot11RadioIntfBindEntry 3 }
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11RadioIntfBindTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11DataRateConfigTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11DataRateConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11DataRateConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table will provide data rate configuration for a specific radio type."
|
|
::= { hpnicfDot11DataRateConfigGroup 1 }
|
|
|
|
hpnicfDot11DataRateConfigEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11DataRateConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry of the table will provide data rate configuration for a
|
|
specific radio type."
|
|
INDEX
|
|
{
|
|
hpnicfDot11RadioTypeID
|
|
}
|
|
::= { hpnicfDot11DataRateConfigTable 1 }
|
|
|
|
HpnicfDot11DataRateConfigEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11RadioTypeID HpnicfDot11RadioType,
|
|
hpnicfDot11SupportedRateSet OCTET STRING,
|
|
hpnicfDot11MandatoryRateSet OCTET STRING,
|
|
hpnicfDot11DisabledRateSet OCTET STRING,
|
|
hpnicfDot11SmartRateSet OCTET STRING
|
|
}
|
|
|
|
hpnicfDot11RadioTypeID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the radio type."
|
|
::= { hpnicfDot11DataRateConfigEntry 1 }
|
|
|
|
hpnicfDot11SupportedRateSet OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the supported rate set of a particular radio type."
|
|
::= { hpnicfDot11DataRateConfigEntry 2 }
|
|
|
|
hpnicfDot11MandatoryRateSet OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the mandatory rate set of a particular radio type."
|
|
::= { hpnicfDot11DataRateConfigEntry 3 }
|
|
|
|
hpnicfDot11DisabledRateSet OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the disabled rate set of a particular radio type."
|
|
::= { hpnicfDot11DataRateConfigEntry 4 }
|
|
|
|
hpnicfDot11SmartRateSet OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the rate set of a particular radio type."
|
|
::= { hpnicfDot11DataRateConfigEntry 5 }
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11DataRateConfigTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11WlanEssIfTable Definition
|
|
-- *************************************************************************
|
|
|
|
hpnicfDot11WlanEssIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11WlanEssIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure WLAN ESS interface."
|
|
::= { hpnicfDot11InterfaceConfigGroup 1 }
|
|
|
|
hpnicfDot11WlanEssIfEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11WlanEssIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the WLAN ESS interface configuration."
|
|
INDEX
|
|
{
|
|
hpnicfDot11WlanEssIfNumber
|
|
}
|
|
::= { hpnicfDot11WlanEssIfTable 1 }
|
|
|
|
HpnicfDot11WlanEssIfEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11WlanEssIfNumber Integer32,
|
|
hpnicfDot11WlanEssIfIndex Integer32,
|
|
hpnicfDot11WlanEssRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11WlanEssIfNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the WLAN ESS interface number."
|
|
::= { hpnicfDot11WlanEssIfEntry 1 }
|
|
|
|
hpnicfDot11WlanEssIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the ifIndex of WLAN-ESS interface."
|
|
::= { hpnicfDot11WlanEssIfEntry 2 }
|
|
|
|
hpnicfDot11WlanEssRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the WLAN ESS interface row status."
|
|
::= { hpnicfDot11WlanEssIfEntry 3 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11WlanEssIfTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11WlanBssIfTable Definition
|
|
-- *************************************************************************
|
|
|
|
hpnicfDot11WlanBssIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11WlanBssIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure WLAN BSS interface."
|
|
::= { hpnicfDot11InterfaceConfigGroup 2 }
|
|
|
|
hpnicfDot11WlanBssIfEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11WlanBssIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the WLAN BSS interface configuration."
|
|
INDEX
|
|
{
|
|
hpnicfDot11WlanBssIfNumber
|
|
}
|
|
::= { hpnicfDot11WlanBssIfTable 1 }
|
|
|
|
HpnicfDot11WlanBssIfEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11WlanBssIfNumber Integer32,
|
|
hpnicfDot11WlanBssIfIndex Integer32,
|
|
hpnicfDot11WlanBssRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11WlanBssIfNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the WLAN BSS interface number."
|
|
::= { hpnicfDot11WlanBssIfEntry 1 }
|
|
|
|
hpnicfDot11WlanBssIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the ifIndex of WLAN-BSS interface."
|
|
::= { hpnicfDot11WlanBssIfEntry 2 }
|
|
|
|
hpnicfDot11WlanBssRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the WLAN BSS interface row status."
|
|
::= { hpnicfDot11WlanBssIfEntry 3 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11WlanBssIfTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11WLANEthernetIfTable Definition
|
|
-- *************************************************************************
|
|
|
|
hpnicfDot11WLANEthernetIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11WLANEthernetIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure WLAN Ethernet interface."
|
|
::= { hpnicfDot11InterfaceConfigGroup 3 }
|
|
|
|
hpnicfDot11WLANEthernetIfEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11WLANEthernetIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the WLAN Ethernet interface configuration."
|
|
INDEX
|
|
{
|
|
hpnicfDot11WlanEthernetIfNumber
|
|
}
|
|
::= { hpnicfDot11WLANEthernetIfTable 1 }
|
|
|
|
HpnicfDot11WLANEthernetIfEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11WlanEthernetIfNumber Integer32,
|
|
hpnicfDot11WLANEthernetIfIndex Integer32,
|
|
hpnicfDot11WlanEthernetRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11WlanEthernetIfNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the WLAN Ethernet interface number."
|
|
::= { hpnicfDot11WLANEthernetIfEntry 1 }
|
|
|
|
hpnicfDot11WLANEthernetIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the ifIndex of WLAN-Ethernet interface."
|
|
::= { hpnicfDot11WLANEthernetIfEntry 2 }
|
|
|
|
hpnicfDot11WlanEthernetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the Wlan Ethernet interface row status."
|
|
::= { hpnicfDot11WLANEthernetIfEntry 3 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11DataRateConfigTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11PortSecurityTable Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11PortSecurityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11PortSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines the WLAN security status for ESS, BSS, mesh and
|
|
WLAN-Ethernet interface which binding the crypto service-template.
|
|
Otherwise, when binding the clear service-template,
|
|
hpnicfPortSecurityTables should be used to configure port security."
|
|
::= { hpnicfDot11InterfaceConfigGroup 4 }
|
|
|
|
hpnicfDot11PortSecurityEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11PortSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is a row in this table for each ESS, BSS and WLAN-Ethernet
|
|
interface.It is indexed using the object ifIndex in RFC1213-MIB."
|
|
INDEX
|
|
{
|
|
ifIndex
|
|
}
|
|
::= { hpnicfDot11PortSecurityTable 1 }
|
|
|
|
HpnicfDot11PortSecurityEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11PortSecurityMode INTEGER,
|
|
hpnicfDot11SecurityUserLoginTxKeyType INTEGER,
|
|
hpnicfDot11SecurityPskKeyMode INTEGER,
|
|
hpnicfDot11SecurityPskKeyString DisplayString
|
|
}
|
|
|
|
hpnicfDot11PortSecurityMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noRestrictions(1),
|
|
userLoginSecureExt(2),
|
|
psk(3),
|
|
macAddressAndPsk(4),
|
|
userLoginSecureExtOrPsk(5),
|
|
ext(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determines the security modes of the WLAN port.
|
|
|
|
noRestrictions - The default value,no any security mode is set.
|
|
|
|
userLoginSecureExt - Access to the port is denied until the port
|
|
client is authorized (by 802.1X).
|
|
|
|
psk - Access to the port is denied until the port client is
|
|
authorized (by 802.1X key negotiation).
|
|
|
|
macAddressAndPsk - The MAC address is first authenticated and only if
|
|
this succeeds does the psk then attempt user authentication.
|
|
|
|
userLoginSecureExtOrPsk - This selects both the userLoginSecureExt and
|
|
psk modes together such that either is allowed to authorized access.
|
|
Which mode works for client depends on the client's choice.
|
|
|
|
ext - Access to the port is denied until the port client is
|
|
authenticated (by ext).
|
|
"
|
|
::= { hpnicfDot11PortSecurityEntry 1 }
|
|
|
|
hpnicfDot11SecurityUserLoginTxKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
userLoginTxKeyTypeNone(1),
|
|
userLoginTxKeyTypeDot11Key(2),
|
|
userLoginTxKeyTypeRsaRC4Key(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the key type in the 802.1X EAPOL_Key packet.
|
|
|
|
userLoginTxKeyTypeNone - This means the key type is not set yet.
|
|
|
|
userLoginTxKeyTypeDot11Key - This selects the 802.11 key type.
|
|
|
|
userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4
|
|
session encryption."
|
|
::= { hpnicfDot11PortSecurityEntry 2 }
|
|
|
|
hpnicfDot11SecurityPskKeyMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
pskKeyModeNone(1),
|
|
pskKeyModePassPhrase(2),
|
|
pskKeyModeRawKey(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the password input mode. When input as pskKeyModePassPhrase,
|
|
hpnicfDot11SecurePskKeyString must be 8 to 63 characters; when input as
|
|
pskKeyModeRawKey, hpnicfDot11SecurePskKeyString must be 64 characters and
|
|
each character must be '0'-'9', 'a'-'f' and 'A'-'F'."
|
|
::= { hpnicfDot11PortSecurityEntry 3 }
|
|
|
|
hpnicfDot11SecurityPskKeyString OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the password string used for psk authentication."
|
|
::= { hpnicfDot11PortSecurityEntry 4 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11PortSecurityTable Definition
|
|
-- *****************************************************************************
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11WlanMeshIfTable Definition
|
|
-- *************************************************************************
|
|
|
|
hpnicfDot11WlanMeshIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11WlanMeshIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure WLAN mesh interface."
|
|
::= { hpnicfDot11InterfaceConfigGroup 5 }
|
|
|
|
hpnicfDot11WlanMeshIfEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11WlanMeshIfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the WLAN mesh interface configuration."
|
|
INDEX
|
|
{
|
|
hpnicfDot11WlanMeshIfNumber
|
|
}
|
|
::= { hpnicfDot11WlanMeshIfTable 1 }
|
|
|
|
HpnicfDot11WlanMeshIfEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11WlanMeshIfNumber Integer32,
|
|
hpnicfDot11WlanMeshIfIndex Integer32,
|
|
hpnicfDot11WlanMeshRowStatus RowStatus
|
|
}
|
|
|
|
hpnicfDot11WlanMeshIfNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the WLAN mesh interface number."
|
|
::= { hpnicfDot11WlanMeshIfEntry 1 }
|
|
|
|
hpnicfDot11WlanMeshIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the index of WLAN mesh interface."
|
|
::= { hpnicfDot11WlanMeshIfEntry 2 }
|
|
|
|
hpnicfDot11WlanMeshRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This node represents the WLAN mesh interface row status."
|
|
::= { hpnicfDot11WlanMeshIfEntry 3 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11WlanMeshIfTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11ACBackupGroup Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11BackupACAdrssIP OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the backup AC IP address.
|
|
If the backup AC IP address is not configured,
|
|
the object value is 0.0.0.0."
|
|
::= { hpnicfDot11ACBackupGroup 1 }
|
|
|
|
hpnicfDot11BackupACAdrssIPv6 OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the backup AC IPv6 address.
|
|
If the backup AC IPv6 address is not configured,
|
|
the object value is 0::0."
|
|
::= { hpnicfDot11ACBackupGroup 2 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11ACBackupGroup Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11RadioElementConfigGroup Definition
|
|
-- *****************************************************************************
|
|
|
|
hpnicfDot11nRadioCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11nRadioCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure dot11n on the radio."
|
|
::= { hpnicfDot11RadioElementConfigGroup 1 }
|
|
|
|
hpnicfDot11nRadioCfgEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11nRadioCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains the dot11n configuration on the radio."
|
|
INDEX { hpnicfDot11nRadioCfgIndex }
|
|
::= { hpnicfDot11nRadioCfgTable 1 }
|
|
|
|
HpnicfDot11nRadioCfgEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11nRadioCfgIndex HpnicfDot11RadioElementIndex,
|
|
hpnicfDot11nAMpduEnable TruthValue,
|
|
hpnicfDot11nAMsduEnable TruthValue,
|
|
hpnicfDot11nClientDot11nOnly TruthValue,
|
|
hpnicfDot11nChanelBand INTEGER,
|
|
hpnicfDot11nShortGiEnable TruthValue,
|
|
hpnicfDot11nClientDot11acOnly TruthValue
|
|
}
|
|
|
|
hpnicfDot11nRadioCfgIndex OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioElementIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents index of the radio."
|
|
::= { hpnicfDot11nRadioCfgEntry 1 }
|
|
|
|
hpnicfDot11nAMpduEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the function of A-MPDU."
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11nRadioCfgEntry 2 }
|
|
|
|
hpnicfDot11nAMsduEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the function of A-MSDU."
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11nRadioCfgEntry 3 }
|
|
|
|
hpnicfDot11nClientDot11nOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If radio type is 802.11an or 802.11gn, only permit clients of 11n mode.
|
|
If radio type is 802.11ac, permit clients of 11n and 11ac mode."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11nRadioCfgEntry 4 }
|
|
|
|
hpnicfDot11nChanelBand OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mode20(1),
|
|
mode40(2),
|
|
mode80(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the bandwidth mode."
|
|
DEFVAL { mode40 }
|
|
::= { hpnicfDot11nRadioCfgEntry 5 }
|
|
|
|
hpnicfDot11nShortGiEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The function of Short GI."
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11nRadioCfgEntry 6 }
|
|
|
|
hpnicfDot11nClientDot11acOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Only permit clients of 11ac mode."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11nRadioCfgEntry 7 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11RadioElementConfigGroup Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11RadioWDSTable Definition
|
|
-- *****************************************************************************
|
|
|
|
hpnicfDot11RadioWDSTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11RadioWDSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure WDS on the radio."
|
|
::= { hpnicfDot11RadioElementConfigGroup 2 }
|
|
|
|
hpnicfDot11RadioWDSEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioWDSEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the WDS configuration on the radio."
|
|
INDEX
|
|
{
|
|
hpnicfDot11RadioWDSIndex
|
|
}
|
|
::= { hpnicfDot11RadioWDSTable 1 }
|
|
|
|
HpnicfDot11RadioWDSEntry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11RadioWDSIndex HpnicfDot11RadioElementIndex,
|
|
hpnicfDot11RadioWDSMode INTEGER,
|
|
hpnicfDot11RadioWDSNetWorkID OCTET STRING,
|
|
hpnicfDot11WDSSecPskKeyMode INTEGER,
|
|
hpnicfDot11WDSSecPskKeyString DisplayString
|
|
}
|
|
|
|
hpnicfDot11RadioWDSIndex OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioElementIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the element index of radio."
|
|
::= { hpnicfDot11RadioWDSEntry 1 }
|
|
|
|
hpnicfDot11RadioWDSMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
nowds(1),
|
|
wds(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents enable the WDS mode or not.
|
|
nowds: The WDS mode is disabled.
|
|
wds : The WDS mode is enabled"
|
|
DEFVAL { nowds }
|
|
::= { hpnicfDot11RadioWDSEntry 2 }
|
|
|
|
hpnicfDot11RadioWDSNetWorkID OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the mesh ID of WDS."
|
|
DEFVAL { "" }
|
|
::= { hpnicfDot11RadioWDSEntry 3 }
|
|
|
|
hpnicfDot11WDSSecPskKeyMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
pskKeyModeNone(1),
|
|
pskKeyModePassPhrase(2),
|
|
pskKeyModeRawKey(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the PSK mode of WDS."
|
|
DEFVAL { pskKeyModeNone }
|
|
::= { hpnicfDot11RadioWDSEntry 4 }
|
|
|
|
hpnicfDot11WDSSecPskKeyString OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents the PSK value of WDS."
|
|
DEFVAL { "" }
|
|
::= { hpnicfDot11RadioWDSEntry 5 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11RadioWDSTable Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11nRadioCfg2Table Definition
|
|
-- *****************************************************************************
|
|
|
|
hpnicfDot11nRadioCfg2Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot11nRadioCfg2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to configure dot11n on the radio."
|
|
::= { hpnicfDot11RadioElementConfigGroup 3 }
|
|
|
|
hpnicfDot11nRadioCfg2Entry OBJECT-TYPE
|
|
SYNTAX HpnicfDot11nRadioCfg2Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains the dot11n configuration on the radio."
|
|
INDEX {
|
|
hpnicfDot11nRadioCfg2APIDIndex,
|
|
hpnicfDot11nRadioCfg2RadioIDIndex
|
|
}
|
|
::= { hpnicfDot11nRadioCfg2Table 1 }
|
|
|
|
HpnicfDot11nRadioCfg2Entry ::= SEQUENCE
|
|
{
|
|
hpnicfDot11nRadioCfg2APIDIndex HpnicfDot11ObjectIDType,
|
|
hpnicfDot11nRadioCfg2RadioIDIndex HpnicfDot11RadioScopeType,
|
|
hpnicfDot11nRadioCfg2AMpduEnable TruthValue,
|
|
hpnicfDot11nRadioCfg2AMsduEnable TruthValue,
|
|
hpnicfDot11nRadioCfg2ClientDot11nOnly TruthValue,
|
|
hpnicfDot11nRadioCfg2ChannelBand INTEGER,
|
|
hpnicfDot11nRadioCfg2ShortGiEnable TruthValue,
|
|
hpnicfDot11nRadioCfg2AMpduEnableCM INTEGER,
|
|
hpnicfDot11nRadioCfg2ChannelBandCM INTEGER,
|
|
hpnicfDot11nRadioCfg2ShortGiEnableCM INTEGER,
|
|
hpnicfDot11nRadioCfg2ClientDot11acOnly TruthValue,
|
|
hpnicfDot11nRadioCfg2ClientDot11nOnlyCM HpnicfDot11TruthValueCM
|
|
}
|
|
|
|
hpnicfDot11nRadioCfg2APIDIndex OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ObjectIDType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents index of the AP."
|
|
::= { hpnicfDot11nRadioCfg2Entry 1 }
|
|
|
|
hpnicfDot11nRadioCfg2RadioIDIndex OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioScopeType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents index of the radio."
|
|
::= { hpnicfDot11nRadioCfg2Entry 2 }
|
|
|
|
hpnicfDot11nRadioCfg2AMpduEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the function of A-MPDU."
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11nRadioCfg2Entry 3 }
|
|
|
|
hpnicfDot11nRadioCfg2AMsduEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the function of A-MSDU."
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11nRadioCfg2Entry 4 }
|
|
|
|
hpnicfDot11nRadioCfg2ClientDot11nOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If radio type is 802.11an or 802.11gn, only permit clients of 11n mode.
|
|
If radio type is 802.11ac, permit clients of 11n and 11ac mode."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11nRadioCfg2Entry 5 }
|
|
|
|
hpnicfDot11nRadioCfg2ChannelBand OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mode20(1),
|
|
mode40(2),
|
|
mode80(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the bandwidth mode."
|
|
::= { hpnicfDot11nRadioCfg2Entry 6 }
|
|
|
|
hpnicfDot11nRadioCfg2ShortGiEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the function of Short GI."
|
|
DEFVAL { true }
|
|
::= { hpnicfDot11nRadioCfg2Entry 7 }
|
|
|
|
hpnicfDot11nRadioCfg2AMpduEnableCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the function of A-MPDU."
|
|
DEFVAL { on }
|
|
::= { hpnicfDot11nRadioCfg2Entry 8 }
|
|
|
|
hpnicfDot11nRadioCfg2ChannelBandCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mode40(1),
|
|
mode20(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the bandwidth mode."
|
|
::= { hpnicfDot11nRadioCfg2Entry 9 }
|
|
|
|
hpnicfDot11nRadioCfg2ShortGiEnableCM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the function of Short GI."
|
|
DEFVAL { on }
|
|
::= { hpnicfDot11nRadioCfg2Entry 10 }
|
|
|
|
hpnicfDot11nRadioCfg2ClientDot11acOnly OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Only permit clients of 11ac mode."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot11nRadioCfg2Entry 11 }
|
|
|
|
hpnicfDot11nRadioCfg2ClientDot11nOnlyCM OBJECT-TYPE
|
|
SYNTAX HpnicfDot11TruthValueCM
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If radio type is 802.11an or 802.11gn, permit only clients of 11n mode.
|
|
If radio type is 802.11ac, permit clients of both 11n and 11ac mode."
|
|
DEFVAL { dot11false }
|
|
::= { hpnicfDot11nRadioCfg2Entry 12 }
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11nRadioCfg2Table Definition
|
|
-- *****************************************************************************
|
|
|
|
-- *****************************************************************************
|
|
-- * hpnicfDot11CfgNotifyGroup Definition
|
|
-- *****************************************************************************
|
|
hpnicfDot11CfgNotifications OBJECT IDENTIFIER ::= { hpnicfDot11CfgNotifyGroup 0 }
|
|
|
|
hpnicfDot11CfgCipherChange NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hpnicfDot11SSIDName,
|
|
hpnicfDot11SecurityCiphers
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent when cipher type of corresponding service
|
|
template is changed."
|
|
::= { hpnicfDot11CfgNotifications 1 }
|
|
|
|
hpnicfDot11CfgPSKChange NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hpnicfDot11SSIDName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent when pre-shared key of corresponding
|
|
service template is changed."
|
|
::= { hpnicfDot11CfgNotifications 2 }
|
|
|
|
hpnicfDot11SSIDWepIDConflictTrap NOTIFICATION-TYPE
|
|
OBJECTS
|
|
{
|
|
hpnicfDot11PreConflictTemplateNum,
|
|
hpnicfDot11CurrConflictTemplateNum,
|
|
hpnicfDot11ConflictCipherIdx,
|
|
hpnicfDot11ConfigureAPID,
|
|
hpnicfDot11ConfigureRadioID,
|
|
hpnicfDot11ConfigureAPMacAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification will be sent when the same wep ID is configured
|
|
on two service policies."
|
|
::= { hpnicfDot11CfgNotifications 3 }
|
|
|
|
-- CFG Notification variable object
|
|
|
|
hpnicfDot11CfgTrapVarObjects OBJECT IDENTIFIER
|
|
::= { hpnicfDot11CfgNotifyGroup 1 }
|
|
|
|
hpnicfDot11PreConflictTemplateNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1024)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents previous service policy ID when radio bind service policy
|
|
and current service policy conflict with previous service policy
|
|
in cipher configuration."
|
|
::= { hpnicfDot11CfgTrapVarObjects 1 }
|
|
|
|
hpnicfDot11CurrConflictTemplateNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..1024)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents current service policy ID when radio bind service policy
|
|
and current service policy conflict with previous service policy
|
|
in cipher configuration."
|
|
::= { hpnicfDot11CfgTrapVarObjects 2 }
|
|
|
|
hpnicfDot11ConflictCipherIdx OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents wep ID that conflicted with."
|
|
::= { hpnicfDot11CfgTrapVarObjects 3 }
|
|
|
|
hpnicfDot11ConfigureAPID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11ObjectIDType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents which AP is configured."
|
|
::= { hpnicfDot11CfgTrapVarObjects 4 }
|
|
|
|
hpnicfDot11ConfigureRadioID OBJECT-TYPE
|
|
SYNTAX HpnicfDot11RadioScopeType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents which radio in AP is configured."
|
|
::= { hpnicfDot11CfgTrapVarObjects 5 }
|
|
|
|
hpnicfDot11ConfigureAPMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents MAC Address of AP."
|
|
::= { hpnicfDot11CfgTrapVarObjects 6 }
|
|
|
|
-- *****************************************************************************
|
|
-- * End of hpnicfDot11CfgNotifyGroup Definition
|
|
-- *****************************************************************************
|
|
|
|
END
|