758 lines
26 KiB
Plaintext
758 lines
26 KiB
Plaintext
DMON-PHY-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
IpAddress,
|
|
Unsigned32,
|
|
Integer32,
|
|
Counter32,
|
|
enterprises
|
|
FROM SNMPv2-SMI
|
|
RowStatus,
|
|
DateAndTime,
|
|
TimeInterval,
|
|
StorageType,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
OBJECT-GROUP,
|
|
MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
TenthdB,
|
|
TenthdBmV,
|
|
DocsEqualizerData
|
|
FROM DOCS-IF-MIB
|
|
ModulationType,
|
|
dmonMib
|
|
FROM DMON-MIB;
|
|
|
|
|
|
dmonPhyGroup MODULE-IDENTITY
|
|
LAST-UPDATED "201111041400Z"
|
|
ORGANIZATION ""
|
|
CONTACT-INFO
|
|
"
|
|
Postal:
|
|
E-mail: "
|
|
DESCRIPTION
|
|
"
|
|
This is the MIB module for DMON PHY measurement.
|
|
|
|
History
|
|
MG - 09/09/2011
|
|
-Updated UNITS from centidBmV to TenthdBmV
|
|
-Updated MER OIDS UNITS from TenthdBmV to TenthdB
|
|
MG - 09/23/2011
|
|
-Change units from billionth to trillionth
|
|
|
|
MG - 11/04/2011
|
|
-Added
|
|
-dmonPhyInfoManagement
|
|
-dmonPhyInfoMgtHistoryRetention
|
|
|
|
-Change UNITS from TenthdBmv to dBmv
|
|
-Change UNITS from TenthdB to dB
|
|
"
|
|
|
|
::= { dmonMib 1 }
|
|
|
|
|
|
--
|
|
-- The following group defines the managment of the DMon Phy History Management
|
|
--
|
|
|
|
dmonPhyInfoManagement OBJECT IDENTIFIER ::= { dmonPhyGroup 1 }
|
|
|
|
dmonPhyInfoMgtHistoryRetention OBJECT-TYPE
|
|
SYNTAX Unsigned32 (3600..10000000000)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total amount of seconds that the DMon must retain PHY History in RAM memory.
|
|
Once this OID value is set, it MUST be preserved in non-volatile memory
|
|
and required a reboot to go into effect.
|
|
The DMon MUST retain a Minimum of 3600 seconds of history
|
|
"
|
|
DEFVAL {86400} -- 24Hours
|
|
::= { dmonPhyInfoManagement 1 }
|
|
|
|
|
|
dmonPhyInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DmonPhyInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the attributes of downstream
|
|
channels (frequency bands)."
|
|
::= { dmonPhyGroup 2 }
|
|
|
|
dmonPhyInfoEntry OBJECT-TYPE
|
|
SYNTAX DmonPhyInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry provides a list of attributes for a single
|
|
downstream channel.
|
|
An entry in this table exists for each downstream channel"
|
|
INDEX { dmonPhyChannelIndex }
|
|
::= { dmonPhyInfoTable 1 }
|
|
|
|
DmonPhyInfoEntry ::= SEQUENCE {
|
|
dmonPhyChannelIndex Integer32,
|
|
dmonPhyChannelLockedtime DateAndTime,
|
|
dmonPhyChannelFrequency Integer32,
|
|
dmonPhyChannelModulation ModulationType,
|
|
dmonPhyChannelPower TenthdBmV,
|
|
dmonPhyChannelAnnex INTEGER,
|
|
dmonPhyChannelSigQUnerroreds Counter32,
|
|
dmonPhyChannelSigQCorrecteds Counter32,
|
|
dmonPhyChannelSigQUncorrectables Counter32,
|
|
dmonPhyChannelSigQMER TenthdB,
|
|
dmonPhyChannelSigQPreFECBER Integer32,
|
|
dmonPhyChannelSigQPostFECBER Integer32,
|
|
dmonPhyChannelSigQCER Integer32,
|
|
dmonPhyChannelSigQECR Integer32,
|
|
dmonPhyChannelInterleave INTEGER,
|
|
dmonPhyChannelSigQEqualizationData DocsEqualizerData,
|
|
dmonPhyChannelSigScanId Integer32,
|
|
dmonPhyChannelPowerMin TenthdBmV,
|
|
dmonPhyChannelPowerMax TenthdBmV,
|
|
dmonPhyChannelSigQMERMin TenthdB,
|
|
dmonPhyChannelSigQMERMax TenthdB,
|
|
dmonPhyChannelScanMode INTEGER,
|
|
dmonPhyChannelQAMlocked TruthValue,
|
|
dmonPhyChannelFEClocked TruthValue
|
|
}
|
|
|
|
dmonPhyChannelIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The downstream channel index starting from 1."
|
|
::= { dmonPhyInfoEntry 1 }
|
|
|
|
dmonPhyChannelLockedtime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time of the reading"
|
|
::= { dmonPhyInfoEntry 2 }
|
|
|
|
dmonPhyChannelFrequency OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000000000)
|
|
UNITS "hertz"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The center of the downstream frequency associated with
|
|
this channel. This object will return the current tuner
|
|
frequency."
|
|
::= { dmonPhyInfoEntry 3 }
|
|
|
|
dmonPhyChannelModulation OBJECT-TYPE
|
|
SYNTAX ModulationType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The modulation type associated with this downstream
|
|
channel. If the interface is down, this object either
|
|
returns the most current value, or the value of unknown(1)."
|
|
::= { dmonPhyInfoEntry 4 }
|
|
|
|
dmonPhyChannelPower OBJECT-TYPE
|
|
SYNTAX TenthdBmV
|
|
UNITS "dBmV"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received power level of the channel.
|
|
If the interface is down, this object either returns
|
|
the most current value or the value of 0. See the reference
|
|
for recommended and required power levels."
|
|
::= { dmonPhyInfoEntry 5 }
|
|
|
|
dmonPhyChannelAnnex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(-1),
|
|
annexB(0),
|
|
annexA(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates the conformance of
|
|
the implementation to important regional cable standards.
|
|
annexA : Annex A from ITU-T J.83 is used.
|
|
(equivalent to EN 300 429)
|
|
annexB : Annex B from ITU-T J.83 is used.
|
|
annexC : Annex C from ITU-T J.83 is used."
|
|
::= { dmonPhyInfoEntry 6 }
|
|
|
|
dmonPhyChannelSigQUnerroreds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received on this channel without error."
|
|
::= { dmonPhyInfoEntry 7 }
|
|
|
|
dmonPhyChannelSigQCorrecteds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received on this channel with correctable
|
|
errors."
|
|
::= { dmonPhyInfoEntry 8 }
|
|
|
|
dmonPhyChannelSigQUncorrectables OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Codewords received on this channel with uncorrectable
|
|
errors."
|
|
::= { dmonPhyInfoEntry 9 }
|
|
|
|
dmonPhyChannelSigQMER OBJECT-TYPE
|
|
SYNTAX TenthdB
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Modulation error ratio of the monitored channel"
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Physical
|
|
Layer Specification CM-SP-PHYv3.0-I07-080522,
|
|
Section 6.2.22.3"
|
|
::= { dmonPhyInfoEntry 10 }
|
|
|
|
dmonPhyChannelSigQPreFECBER OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "trillionth"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bit-error-rate of the monitored channel before FEC repair"
|
|
::= { dmonPhyInfoEntry 11 }
|
|
|
|
dmonPhyChannelSigQPostFECBER OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "trillionth"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bit-error-rate of the monitored channel after FEC repair"
|
|
::= { dmonPhyInfoEntry 12 }
|
|
|
|
dmonPhyChannelSigQCER OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "trillionth"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"codeword-error-rate of the monitored channel"
|
|
::= { dmonPhyInfoEntry 13 }
|
|
|
|
dmonPhyChannelSigQECR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "trillionth"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"codeword error-corrected-rate of the monitored channel"
|
|
::= { dmonPhyInfoEntry 14 }
|
|
|
|
dmonPhyChannelInterleave OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
other(2),
|
|
taps8Increment16(3),
|
|
taps16Increment8(4),
|
|
taps32Increment4(5),
|
|
taps64Increment2(6),
|
|
taps128Increment1(7),
|
|
taps12increment17(8),
|
|
taps128Increment2(9),
|
|
taps128Increment3(10),
|
|
taps128Increment4(11),
|
|
taps128Increment5(12),
|
|
taps128Increment6(13),
|
|
taps128Increment7(14),
|
|
taps128Increment8(15)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Forward Error Correction (FEC) interleaving used
|
|
for this downstream channel.
|
|
Values are defined as follows:
|
|
taps8Increment16(3): protection 5.9/4.1 usec,
|
|
latency .22/.15 msec
|
|
taps16Increment8(4): protection 12/8.2 usec,
|
|
latency .48/.33 msec
|
|
taps32Increment4(5): protection 24/16 usec,
|
|
latency .98/.68 msec
|
|
taps64Increment2(6): protection 47/33 usec,
|
|
latency 2/1.4 msec
|
|
taps128Increment1(7): protection 95/66 usec,
|
|
latency 4/2.8 msec
|
|
taps12increment17(8): protection 18/14 usec,
|
|
latency 0.43/0.32 msec
|
|
|
|
The value 'taps12increment17' is supported by EuroDOCSIS
|
|
cable systems only, and the others by DOCSIS cable systems.
|
|
|
|
If the interface is down, this object either returns
|
|
the configured value (CMTS), the most current value (CM),
|
|
or the value of unknown(1).
|
|
The value of other(2) is returned if the interleave
|
|
is known but not defined in the above list.
|
|
See the associated conformance object for write
|
|
conditions and limitations. See the reference for the FEC
|
|
configuration described by the setting of this object."
|
|
|
|
::= { dmonPhyInfoEntry 15 }
|
|
|
|
dmonPhyChannelSigQEqualizationData OBJECT-TYPE
|
|
SYNTAX DocsEqualizerData
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object returns the equalization data for
|
|
the downstream channel."
|
|
::= { dmonPhyInfoEntry 16 }
|
|
|
|
dmonPhyChannelSigScanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Id generated by the dmon to identify a set of data. This Id will be send in the scan finish message.
|
|
It will help the CPS to identify the data set."
|
|
::= { dmonPhyInfoEntry 17 }
|
|
|
|
dmonPhyChannelPowerMin OBJECT-TYPE
|
|
SYNTAX TenthdBmV
|
|
UNITS "dBmV"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min value of the received power level of the channel
|
|
during the dwelling time."
|
|
::= { dmonPhyInfoEntry 18 }
|
|
|
|
dmonPhyChannelPowerMax OBJECT-TYPE
|
|
SYNTAX TenthdBmV
|
|
UNITS "dBmV"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max value of the received power level of the channel
|
|
during the dwelling time."
|
|
::= { dmonPhyInfoEntry 19 }
|
|
|
|
dmonPhyChannelSigQMERMin OBJECT-TYPE
|
|
SYNTAX TenthdB
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min value of the modulation error ratio of the monitored channel
|
|
during the dwelling time."
|
|
::= { dmonPhyInfoEntry 20 }
|
|
|
|
dmonPhyChannelSigQMERMax OBJECT-TYPE
|
|
SYNTAX TenthdB
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max value of the modulation error ratio of the monitored channel
|
|
during the dwelling time."
|
|
::= { dmonPhyInfoEntry 21 }
|
|
|
|
dmonPhyChannelScanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
defaultScan (0),
|
|
fastScan (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates the result of the
|
|
measurement is from."
|
|
::= { dmonPhyInfoEntry 22 }
|
|
|
|
dmonPhyChannelQAMlocked OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether QAM is locked. If not locked, Most of the
|
|
columns in this entry are not valid."
|
|
DEFVAL { false }
|
|
::= { dmonPhyInfoEntry 23 }
|
|
|
|
dmonPhyChannelFEClocked OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether FEC is locked. If not locked, post FEC values
|
|
in this entry are not valid."
|
|
DEFVAL { false }
|
|
::= { dmonPhyInfoEntry 24 }
|
|
|
|
dmonPhyHistoryInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DmonPhyHistoryInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table describes the history attributes of downstream
|
|
channels (frequency bands)."
|
|
::= { dmonPhyGroup 3 }
|
|
|
|
dmonPhyHistoryInfoEntry OBJECT-TYPE
|
|
SYNTAX DmonPhyHistoryInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry provides a list of history attributes for a single
|
|
downstream channel.
|
|
An entry in this table exists for each downstream channel"
|
|
INDEX {
|
|
dmonPhyHistoryChannelIndex,
|
|
dmonPhyHistoryIndex
|
|
}
|
|
::= { dmonPhyHistoryInfoTable 1 }
|
|
|
|
DmonPhyHistoryInfoEntry ::= SEQUENCE {
|
|
dmonPhyHistoryChannelIndex Integer32,
|
|
dmonPhyHistoryIndex Integer32,
|
|
dmonPhyHistoryChannelLockedtime DateAndTime,
|
|
dmonPhyHistoryChannelFrequency Integer32,
|
|
dmonPhyHistoryChannelModulation ModulationType,
|
|
dmonPhyHistoryChannelPower TenthdBmV,
|
|
dmonPhyHistoryChannelAnnex INTEGER,
|
|
dmonPhyHistoryChannelSigQUnerroreds Counter32,
|
|
dmonPhyHistoryChannelSigQCorrecteds Counter32,
|
|
dmonPhyHistoryChannelSigQUncorrectables Counter32,
|
|
dmonPhyHistoryChannelSigQMER TenthdB,
|
|
dmonPhyHistoryChannelSigQPreFECBER Integer32,
|
|
dmonPhyHistoryChannelSigQPostFECBER Integer32,
|
|
dmonPhyHistoryChannelSigQCER Integer32,
|
|
dmonPhyHistoryChannelSigQECR Integer32,
|
|
dmonPhyHistoryChannelInterleave INTEGER,
|
|
dmonPhyHistoryChannelSigQEqualizationData DocsEqualizerData,
|
|
dmonPhyHistoryChannelSigScanId Integer32,
|
|
dmonPhyHistoryChannelPowerMin TenthdBmV,
|
|
dmonPhyHistoryChannelPowerMax TenthdBmV,
|
|
dmonPhyHistoryChannelSigQMERMin TenthdB,
|
|
dmonPhyHistoryChannelSigQMERMax TenthdB,
|
|
dmonPhyHistoryChannelScanMode INTEGER,
|
|
dmonPhyHistoryChannelQAMlocked TruthValue,
|
|
dmonPhyHistoryChannelFEClocked TruthValue
|
|
}
|
|
|
|
dmonPhyHistoryChannelIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history downstream channel index starting from 1."
|
|
::= { dmonPhyHistoryInfoEntry 1 }
|
|
|
|
dmonPhyHistoryIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..9)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history index starting from 1."
|
|
::= { dmonPhyHistoryInfoEntry 2 }
|
|
|
|
dmonPhyHistoryChannelLockedtime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history date and time of the reading"
|
|
::= { dmonPhyHistoryInfoEntry 3 }
|
|
|
|
dmonPhyHistoryChannelFrequency OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1000000000)
|
|
UNITS "hertz"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history center of the downstream frequency associated with
|
|
this channel. This object will return the current tuner
|
|
frequency."
|
|
::= { dmonPhyHistoryInfoEntry 4 }
|
|
|
|
dmonPhyHistoryChannelModulation OBJECT-TYPE
|
|
SYNTAX ModulationType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history modulation type associated with this downstream
|
|
channel. If the interface is down, this object either
|
|
returns the most current value, or the value of unknown(1)."
|
|
::= { dmonPhyHistoryInfoEntry 5 }
|
|
|
|
dmonPhyHistoryChannelPower OBJECT-TYPE
|
|
SYNTAX TenthdBmV
|
|
UNITS "dBmV"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history received power level of the channel.
|
|
If the interface is down, this object either returns
|
|
the most current value or the value of 0. See the reference
|
|
for recommended and required power levels."
|
|
::= { dmonPhyHistoryInfoEntry 6 }
|
|
|
|
dmonPhyHistoryChannelAnnex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(-1),
|
|
annexB(0),
|
|
annexA(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history value of this object indicates the conformance of
|
|
the implementation to important regional cable standards.
|
|
annexA : Annex A from ITU-T J.83 is used.
|
|
(equivalent to EN 300 429)
|
|
annexB : Annex B from ITU-T J.83 is used.
|
|
annexC : Annex C from ITU-T J.83 is used."
|
|
::= { dmonPhyHistoryInfoEntry 7 }
|
|
|
|
dmonPhyHistoryChannelSigQUnerroreds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history codewords received on this channel without error."
|
|
::= { dmonPhyHistoryInfoEntry 8 }
|
|
|
|
dmonPhyHistoryChannelSigQCorrecteds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history codewords received on this channel with correctable
|
|
errors."
|
|
::= { dmonPhyHistoryInfoEntry 9 }
|
|
|
|
dmonPhyHistoryChannelSigQUncorrectables OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "codewords"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history codewords received on this channel with uncorrectable
|
|
errors."
|
|
::= { dmonPhyHistoryInfoEntry 10 }
|
|
|
|
dmonPhyHistoryChannelSigQMER OBJECT-TYPE
|
|
SYNTAX TenthdB
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history modulation error ratio of the monitored channel"
|
|
REFERENCE
|
|
"Data-Over-Cable Service Interface Specifications: Physical
|
|
Layer Specification CM-SP-PHYv3.0-I07-080522,
|
|
Section 6.2.22.3"
|
|
::= { dmonPhyHistoryInfoEntry 11 }
|
|
|
|
dmonPhyHistoryChannelSigQPreFECBER OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "trillionth"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history bit-error-rate of the monitored channel before FEC repair"
|
|
::= { dmonPhyHistoryInfoEntry 12 }
|
|
|
|
dmonPhyHistoryChannelSigQPostFECBER OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "trillionth"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history bit-error-rate of the monitored channel after FEC repair"
|
|
::= { dmonPhyHistoryInfoEntry 13 }
|
|
|
|
dmonPhyHistoryChannelSigQCER OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "trillionth"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history codeword-error-rate of the monitored channel"
|
|
::= { dmonPhyHistoryInfoEntry 14 }
|
|
|
|
dmonPhyHistoryChannelSigQECR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "trillionth"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history codeword error-corrected-rate of the monitored channel"
|
|
::= { dmonPhyHistoryInfoEntry 15 }
|
|
|
|
dmonPhyHistoryChannelInterleave OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
other(2),
|
|
taps8Increment16(3),
|
|
taps16Increment8(4),
|
|
taps32Increment4(5),
|
|
taps64Increment2(6),
|
|
taps128Increment1(7),
|
|
taps12increment17(8),
|
|
taps128Increment2(9),
|
|
taps128Increment3(10),
|
|
taps128Increment4(11),
|
|
taps128Increment5(12),
|
|
taps128Increment6(13),
|
|
taps128Increment7(14),
|
|
taps128Increment8(15)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The history Forward Error Correction (FEC) interleaving used
|
|
for this downstream channel.
|
|
Values are defined as follows:
|
|
taps8Increment16(3): protection 5.9/4.1 usec,
|
|
latency .22/.15 msec
|
|
taps16Increment8(4): protection 12/8.2 usec,
|
|
latency .48/.33 msec
|
|
taps32Increment4(5): protection 24/16 usec,
|
|
latency .98/.68 msec
|
|
taps64Increment2(6): protection 47/33 usec,
|
|
latency 2/1.4 msec
|
|
taps128Increment1(7): protection 95/66 usec,
|
|
latency 4/2.8 msec
|
|
taps12increment17(8): protection 18/14 usec,
|
|
latency 0.43/0.32 msec
|
|
|
|
The value 'taps12increment17' is supported by EuroDOCSIS
|
|
cable systems only, and the others by DOCSIS cable systems.
|
|
|
|
If the interface is down, this object either returns
|
|
the configured value (CMTS), the most current value (CM),
|
|
or the value of unknown(1).
|
|
The value of other(2) is returned if the interleave
|
|
is known but not defined in the above list.
|
|
See the associated conformance object for write
|
|
conditions and limitations. See the reference for the FEC
|
|
configuration described by the setting of this object."
|
|
|
|
::= { dmonPhyHistoryInfoEntry 16 }
|
|
|
|
dmonPhyHistoryChannelSigQEqualizationData OBJECT-TYPE
|
|
SYNTAX DocsEqualizerData
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object returns the hisotry equalization data for
|
|
the downstream channel."
|
|
::= { dmonPhyHistoryInfoEntry 17 }
|
|
|
|
dmonPhyHistoryChannelSigScanId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Id generated by the dmon to identify a set of data. This Id will be send in the scan finish message.
|
|
It will help the CPS to identify the data set."
|
|
::= { dmonPhyHistoryInfoEntry 18 }
|
|
|
|
dmonPhyHistoryChannelPowerMin OBJECT-TYPE
|
|
SYNTAX TenthdBmV
|
|
UNITS "dBmV"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min value of the received power level of the channel
|
|
during the dwelling time."
|
|
::= { dmonPhyHistoryInfoEntry 19 }
|
|
|
|
dmonPhyHistoryChannelPowerMax OBJECT-TYPE
|
|
SYNTAX TenthdBmV
|
|
UNITS "dBmV"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max value of the received power level of the channel
|
|
during the dwelling time."
|
|
::= { dmonPhyHistoryInfoEntry 20 }
|
|
|
|
dmonPhyHistoryChannelSigQMERMin OBJECT-TYPE
|
|
SYNTAX TenthdB
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The min value of the modulation error ratio of the monitored channel
|
|
during the dwelling time."
|
|
::= { dmonPhyHistoryInfoEntry 21 }
|
|
|
|
dmonPhyHistoryChannelSigQMERMax OBJECT-TYPE
|
|
SYNTAX TenthdB
|
|
UNITS "dB"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max value of the modulation error ratio of the monitored channel
|
|
during the dwelling time."
|
|
::= { dmonPhyHistoryInfoEntry 22 }
|
|
|
|
dmonPhyHistoryChannelScanMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
defaultScan (0),
|
|
fastScan (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object indicates the result of the
|
|
measurement is from."
|
|
::= { dmonPhyHistoryInfoEntry 23 }
|
|
|
|
dmonPhyHistoryChannelQAMlocked OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether QAM is locked. If not locked, Most of the
|
|
columns in this entry are not valid."
|
|
DEFVAL { false }
|
|
::= { dmonPhyHistoryInfoEntry 24 }
|
|
|
|
dmonPhyHistoryChannelFEClocked OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether FEC is locked. If not locked, post FEC values
|
|
in this entry are not valid."
|
|
DEFVAL { false }
|
|
::= { dmonPhyHistoryInfoEntry 25 }
|
|
|
|
END
|