16391 lines
555 KiB
Plaintext
16391 lines
555 KiB
Plaintext
ES4626-50-MIB DEFINITIONS ::= BEGIN
|
|
|
|
--1.5.22
|
|
IMPORTS
|
|
OBJECT-TYPE FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION,RowStatus,TimeStamp, TruthValue FROM SNMPv2-TC
|
|
MODULE-IDENTITY, OBJECT-TYPE, mib-2,
|
|
Integer32, Counter32, Gauge32,Unsigned32, NOTIFICATION-TYPE,
|
|
IpAddress, TimeTicks,experimental FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP,
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF
|
|
|
|
TRAP-TYPE FROM RFC-1215
|
|
|
|
enterprises FROM RFC1155-SMI;
|
|
|
|
DisplayString ::= OCTET STRING
|
|
MacAddress ::= OCTET STRING (SIZE (17))
|
|
-- a 17 octet address
|
|
-- in the
|
|
-- "canonical"
|
|
-- order
|
|
|
|
InetAddressType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that represents a type of Internet address.
|
|
|
|
unknown(0) An unknown address type. This value MUST
|
|
be used if the value of the corresponding
|
|
InetAddress object is a zero-length string.
|
|
It may also be used to indicate an IP address
|
|
that is not in one of the formats defined
|
|
below.
|
|
|
|
ipv4(1) An IPv4 address as defined by the
|
|
InetAddressIPv4 textual convention.
|
|
|
|
ipv6(2) An IPv6 address as defined by the
|
|
InetAddressIPv6 textual convention.
|
|
|
|
ipv4z(3) A non-global IPv4 address including a zone
|
|
index as defined by the InetAddressIPv4z
|
|
textual convention.
|
|
|
|
ipv6z(4) A non-global IPv6 address including a zone
|
|
index as defined by the InetAddressIPv6z
|
|
textual convention.
|
|
|
|
dns(16) A DNS domain name as defined by the
|
|
InetAddressDNS textual convention.
|
|
|
|
Each definition of a concrete InetAddressType value must be
|
|
accompanied by a definition of a textual convention for use
|
|
with that InetAddressType.
|
|
|
|
To support future extensions, the InetAddressType textual
|
|
convention SHOULD NOT be sub-typed in object type definitions.
|
|
It MAY be sub-typed in compliance statements in order to
|
|
require only a subset of these address types for a compliant
|
|
implementation.
|
|
|
|
Implementations must ensure that InetAddressType objects
|
|
and any dependent objects (e.g., InetAddress objects) are
|
|
consistent. An inconsistentValue error must be generated
|
|
if an attempt to change an InetAddressType object would,
|
|
for example, lead to an undefined InetAddress value. In
|
|
|
|
particular, InetAddressType/InetAddress pairs must be
|
|
changed together if the address type changes (e.g., from
|
|
ipv6(2) to ipv4(1))."
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
ipv4(1),
|
|
ipv6(2),
|
|
ipv4z(3),
|
|
ipv6z(4),
|
|
dns(16)
|
|
}
|
|
|
|
InetAddress ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Denotes a generic Internet address.
|
|
|
|
An InetAddress value is always interpreted within the context
|
|
of an InetAddressType value. Every usage of the InetAddress
|
|
textual convention is required to specify the InetAddressType
|
|
object that provides the context. It is suggested that the
|
|
InetAddressType object be logically registered before the
|
|
object(s) that use the InetAddress textual convention, if
|
|
they appear in the same logical row.
|
|
|
|
The value of an InetAddress object must always be
|
|
consistent with the value of the associated InetAddressType
|
|
object. Attempts to set an InetAddress object to a value
|
|
inconsistent with the associated InetAddressType
|
|
must fail with an inconsistentValue error.
|
|
|
|
When this textual convention is used as the syntax of an
|
|
index object, there may be issues with the limit of 128
|
|
sub-identifiers specified in SMIv2, STD 58. In this case,
|
|
the object definition MUST include a 'SIZE' clause to
|
|
limit the number of potential instance sub-identifiers;
|
|
otherwise the applicable constraints MUST be stated in
|
|
the appropriate conceptual row DESCRIPTION clauses, or
|
|
in the surrounding documentation if there is no single
|
|
DESCRIPTION clause that is appropriate."
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
|
|
VlanList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan ID range is (1..4094),
|
|
Each octet within this value specifies a set of eight
|
|
vlans, with the first octet specifying vlans 1 through
|
|
8, the second octet specifying vlans 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered vlan, and the least significant bit
|
|
represents the highest numbered vlan. If that bit has
|
|
a value of '1' then that vlan is allowed to pass ;
|
|
the vlan is not allowed if its bit has a value of '0'.
|
|
the value is a changing cells:if the maximum of vlans is 8,you
|
|
sends one octet to me;the remnant octet's value is defaulted '0',
|
|
the remnant octet needn't to send to me."
|
|
SYNTAX OCTET STRING
|
|
|
|
PortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING
|
|
|
|
EnabledStatusPrivate ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A simple status value for the object."
|
|
SYNTAX INTEGER { enabled(1), disabled(0) }
|
|
|
|
ValidStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A simple status value for the object to create and destroy
|
|
a table entry. This is a simplified variant of RowStatus as it
|
|
supports only two values. Setting it to valid(1) creates an entry.
|
|
Setting it to invalid(2) destroys an entry."
|
|
SYNTAX INTEGER { valid(1), invalid(0) }
|
|
|
|
OspfBigMetric ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF External Metric."
|
|
SYNTAX Integer32 (0..'FFFFFE'h)
|
|
|
|
OspfAreaID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An OSPF Area Identifier."
|
|
SYNTAX IpAddress
|
|
|
|
SnmpAdminString ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "255t"
|
|
STATUS current
|
|
DESCRIPTION "An octet string containing administrative
|
|
information, preferably in human-readable form.
|
|
|
|
To facilitate internationalization, this
|
|
information is represented using the ISO/IEC
|
|
IS 10646-1 character set, encoded as an octet
|
|
string using the UTF-8 transformation format
|
|
described in [RFC2279].
|
|
|
|
Since additional code points are added by
|
|
amendments to the 10646 standard from time
|
|
to time, implementations must be prepared to
|
|
encounter any code point from 0x00000000 to
|
|
0x7fffffff. Byte sequences that do not
|
|
correspond to the valid UTF-8 encoding of a
|
|
code point or are outside this range are
|
|
prohibited.
|
|
|
|
The use of control codes should be avoided.
|
|
|
|
When it is necessary to represent a newline,
|
|
the control code sequence CR LF should be used.
|
|
|
|
The use of leading or trailing white space should
|
|
be avoided.
|
|
|
|
For code points not directly supported by user
|
|
interface hardware or software, an alternative
|
|
means of entry and display, such as hexadecimal,
|
|
may be provided.
|
|
|
|
For information encoded in 7-bit US-ASCII,
|
|
the UTF-8 encoding is identical to the
|
|
US-ASCII encoding.
|
|
|
|
UTF-8 may require multiple bytes to represent a
|
|
single character / code point; thus the length
|
|
of this object in octets may be different from
|
|
the number of characters encoded. Similarly,
|
|
size constraints refer to the number of encoded
|
|
octets, not the number of characters represented
|
|
by an encoding.
|
|
|
|
Note that when this TC is used for an object that
|
|
is used or envisioned to be used as an index, then
|
|
a SIZE restriction MUST be specified so that the
|
|
number of sub-identifiers for any object instance
|
|
does not exceed the limit of 128, as defined by
|
|
[RFC3416].
|
|
|
|
Note that the size of an SnmpAdminString object is
|
|
measured in octets, not characters.
|
|
"
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
|
|
-- InterfaceIndex contains the semantics of ifIndex and should be used
|
|
-- for any objects defined in other MIB modules that need these semantics.
|
|
|
|
InterfaceIndex ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, for each interface or
|
|
interface sub-layer in the managed system. It is
|
|
recommended that values are assigned contiguously starting
|
|
from 1. The value for each interface sub-layer must remain
|
|
constant at least from one re-initialization of the entity's
|
|
network management system to the next re-initialization."
|
|
SYNTAX Integer32 (1..2147483647)
|
|
|
|
InterfaceIndexOrZero ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention is an extension of the
|
|
InterfaceIndex convention. The latter defines a greater
|
|
than zero value used to identify an interface or interface
|
|
sub-layer in the managed system. This extension permits the
|
|
additional value of zero. the value zero is object-specific
|
|
and must therefore be defined as part of the description of
|
|
any object which uses this syntax. Examples of the usage of
|
|
zero might include situations where interface was unknown,
|
|
or when none or all interfaces need to be referenced."
|
|
SYNTAX Integer32 (0..2147483647)
|
|
|
|
-- textual conventions
|
|
|
|
LldpChassisIdSubtype ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the source of a chassis identifier.
|
|
|
|
The enumeration 'chassisComponent(1)' represents a chassis
|
|
identifier based on the value of entPhysicalAlias object
|
|
(defined in IETF RFC 2737) for a chassis component (i.e.,
|
|
an entPhysicalClass value of 'chassis(3)').
|
|
|
|
The enumeration 'interfaceAlias(2)' represents a chassis
|
|
identifier based on the value of ifAlias object (defined in
|
|
IETF RFC 2863) for an interface on the containing chassis.
|
|
|
|
The enumeration 'portComponent(3)' represents a chassis
|
|
identifier based on the value of entPhysicalAlias object
|
|
(defined in IETF RFC 2737) for a port or backplane
|
|
component (i.e., entPhysicalClass value of 'port(10)' or
|
|
'backplane(4)'), within the containing chassis.
|
|
|
|
The enumeration 'macAddress(4)' represents a chassis
|
|
identifier based on the value of a unicast source MAC address
|
|
(encoded in network byte order and IEEE 802.3 canonical bit
|
|
order), of a port on the containing chassis as defined in
|
|
IEEE Std. 802-2001.
|
|
|
|
The enumeration 'networkAddress(5)' represents a chassis
|
|
identifier based on a network address, associated with
|
|
a particular chassis. The encoded address is actually
|
|
composed of two fields. The first field is a single octet,
|
|
representing the IANA AddressFamilyNumbers value for the
|
|
specific address type, and the second field is the network
|
|
address value.
|
|
|
|
The enumeration 'interfaceName(6)' represents a chassis
|
|
identifier based on the value of ifName object (defined in
|
|
IETF RFC 2863) for an interface on the containing chassis.
|
|
|
|
The enumeration 'local(7)' represents a chassis identifier
|
|
based on a locally defined value."
|
|
SYNTAX INTEGER {
|
|
chassisComponent(1),
|
|
interfaceAlias(2),
|
|
portComponent(3),
|
|
macAddress(4),
|
|
networkAddress(5),
|
|
interfaceName(6),
|
|
local(7)
|
|
}
|
|
|
|
LldpChassisId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the format of a chassis identifier string.
|
|
Objects of this type are always used with an associated
|
|
LldpChassisIdSubtype object, which identifies the format of
|
|
the particular LldpChassisId object instance.
|
|
|
|
If the associated LldpChassisIdSubtype object has a value of
|
|
'chassisComponent(1)', then the octet string identifies
|
|
a particular instance of the entPhysicalAlias object
|
|
(defined in IETF RFC 2737) for a chassis component (i.e.,
|
|
an entPhysicalClass value of 'chassis(3)').
|
|
|
|
If the associated LldpChassisIdSubtype object has a value
|
|
of 'interfaceAlias(2)', then the octet string identifies
|
|
a particular instance of the ifAlias object (defined in
|
|
IETF RFC 2863) for an interface on the containing chassis.
|
|
If the particular ifAlias object does not contain any values,
|
|
another chassis identifier type should be used.
|
|
|
|
If the associated LldpChassisIdSubtype object has a value
|
|
of 'portComponent(3)', then the octet string identifies a
|
|
particular instance of the entPhysicalAlias object (defined
|
|
in IETF RFC 2737) for a port or backplane component within
|
|
the containing chassis.
|
|
|
|
If the associated LldpChassisIdSubtype object has a value of
|
|
'macAddress(4)', then this string identifies a particular
|
|
unicast source MAC address (encoded in network byte order and
|
|
IEEE 802.3 canonical bit order), of a port on the containing
|
|
chassis as defined in IEEE Std. 802-2001.
|
|
|
|
If the associated LldpChassisIdSubtype object has a value of
|
|
'networkAddress(5)', then this string identifies a particular
|
|
network address, encoded in network byte order, associated
|
|
with one or more ports on the containing chassis. The first
|
|
octet contains the IANA Address Family Numbers enumeration
|
|
value for the specific address type, and octets 2 through
|
|
N contain the network address value in network byte order.
|
|
|
|
If the associated LldpChassisIdSubtype object has a value
|
|
of 'interfaceName(6)', then the octet string identifies
|
|
a particular instance of the ifName object (defined in
|
|
IETF RFC 2863) for an interface on the containing chassis.
|
|
If the particular ifName object does not contain any values,
|
|
another chassis identifier type should be used.
|
|
|
|
If the associated LldpChassisIdSubtype object has a value of
|
|
'local(7)', then this string identifies a locally assigned
|
|
Chassis ID."
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
|
|
LldpPortIdSubtype ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the source of a particular type of port
|
|
identifier used in the LLDP MIB.
|
|
|
|
The enumeration 'interfaceAlias(1)' represents a port
|
|
identifier based on the ifAlias MIB object, defined in IETF
|
|
RFC 2863.
|
|
|
|
The enumeration 'portComponent(2)' represents a port
|
|
identifier based on the value of entPhysicalAlias (defined in
|
|
IETF RFC 2737) for a port component (i.e., entPhysicalClass
|
|
value of 'port(10)'), within the containing chassis.
|
|
|
|
The enumeration 'macAddress(3)' represents a port identifier
|
|
based on a unicast source MAC address (encoded in network
|
|
byte order and IEEE 802.3 canonical bit order), which has
|
|
been detected by the agent and associated with a particular
|
|
port (IEEE Std. 802-2001).
|
|
|
|
The enumeration 'networkAddress(4)' represents a port
|
|
identifier based on a network address, detected by the agent
|
|
and associated with a particular port.
|
|
|
|
The enumeration 'interfaceName(5)' represents a port
|
|
identifier based on the ifName MIB object, defined in IETF
|
|
RFC 2863.
|
|
|
|
The enumeration 'agentCircuitId(6)' represents a port
|
|
identifier based on the agent-local identifier of the circuit
|
|
(defined in RFC 3046), detected by the agent and associated
|
|
with a particular port.
|
|
|
|
The enumeration 'local(7)' represents a port identifier
|
|
based on a value locally assigned."
|
|
|
|
SYNTAX INTEGER {
|
|
interfaceAlias(1),
|
|
portComponent(2),
|
|
macAddress(3),
|
|
networkAddress(4),
|
|
interfaceName(5),
|
|
agentCircuitId(6),
|
|
local(7)
|
|
}
|
|
|
|
LldpPortId ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the format of a port identifier string.
|
|
Objects of this type are always used with an associated
|
|
LldpPortIdSubtype object, which identifies the format of the
|
|
particular LldpPortId object instance.
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'interfaceAlias(1)', then the octet string identifies a
|
|
particular instance of the ifAlias object (defined in IETF
|
|
RFC 2863). If the particular ifAlias object does not contain
|
|
any values, another port identifier type should be used.
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'portComponent(2)', then the octet string identifies a
|
|
particular instance of the entPhysicalAlias object (defined
|
|
in IETF RFC 2737) for a port or backplane component.
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'macAddress(3)', then this string identifies a particular
|
|
unicast source MAC address (encoded in network byte order
|
|
and IEEE 802.3 canonical bit order) associated with the port
|
|
(IEEE Std. 802-2001).
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'networkAddress(4)', then this string identifies a network
|
|
address associated with the port. The first octet contains
|
|
the IANA AddressFamilyNumbers enumeration value for the
|
|
specific address type, and octets 2 through N contain the
|
|
networkAddress address value in network byte order.
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'interfaceName(5)', then the octet string identifies a
|
|
particular instance of the ifName object (defined in IETF
|
|
RFC 2863). If the particular ifName object does not contain
|
|
any values, another port identifier type should be used.
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'agentCircuitId(6)', then this string identifies a agent-local
|
|
identifier of the circuit (defined in RFC 3046).
|
|
|
|
If the associated LldpPortIdSubtype object has a value of
|
|
'local(7)', then this string identifies a locally
|
|
assigned port ID."
|
|
SYNTAX OCTET STRING (SIZE (1..255))
|
|
|
|
LldpManAddrIfSubtype ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the basis of a particular type of
|
|
interface associated with the management address.
|
|
|
|
The enumeration 'unknown(1)' represents the case where the
|
|
interface is not known.
|
|
|
|
The enumeration 'ifIndex(2)' represents interface identifier
|
|
based on the ifIndex MIB object.
|
|
|
|
The enumeration 'systemPortNumber(3)' represents interface
|
|
identifier based on the system port numbering convention."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.9.5"
|
|
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
ifIndex(2),
|
|
systemPortNumber(3)
|
|
}
|
|
|
|
LldpManAddress ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of a management address associated with the LLDP
|
|
agent that may be used to reach higher layer entities to
|
|
assist discovery by network management.
|
|
|
|
It should be noted that appropriate security credentials,
|
|
such as SNMP engineId, may be required to access the LLDP
|
|
agent using a management address. These necessary credentials
|
|
should be known by the network management and the objects
|
|
associated with the credentials are not included in the
|
|
LLDP agent."
|
|
SYNTAX OCTET STRING (SIZE (1..31))
|
|
|
|
LldpSystemCapabilitiesMap ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This TC describes the system capabilities.
|
|
|
|
The bit 'other(0)' indicates that the system has capabilities
|
|
other than those listed below.
|
|
|
|
The bit 'repeater(1)' indicates that the system has repeater
|
|
capability.
|
|
|
|
The bit 'bridge(2)' indicates that the system has bridge
|
|
capability.
|
|
|
|
The bit 'accessPoint(3)' indicates that the system has access
|
|
point capability.
|
|
|
|
The bit 'router(4)' indicates that the system has router
|
|
capability.
|
|
|
|
The bit 'telephone(5)' indicates that the system has telephone
|
|
capability.
|
|
|
|
The bit 'wirelessStation(6)' indicates that the system has
|
|
wireless Station capability.
|
|
|
|
The bit 'stationOnly(7)' indicates that the system has only
|
|
station capability and nothing else."
|
|
SYNTAX BITS {
|
|
other(0),
|
|
repeater(1),
|
|
bridge(2),
|
|
accessPoint(3),
|
|
router(4),
|
|
telephone(5),
|
|
wirelessStation(6),
|
|
stationOnly(7)
|
|
}
|
|
|
|
LldpPortNumber ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each port contained in the chassis (that is known to the
|
|
LLDP agent) is uniquely identified by a port number.
|
|
|
|
A port number has no mandatory relationship to an
|
|
InterfaceIndex object (of the interfaces MIB, IETF RFC 2683).
|
|
If the LLDP agent is a IEEE 802.1D, IEEE 802.1Q bridge,
|
|
the LldpPortNumber will have the same value as the
|
|
dot1dBasePort object (defined in IETF RFC 1493) associated
|
|
corresponding bridge port. If the LLDP agent is not a
|
|
IEEE 802.1D, IEEE 802.1Q bridge, the LldpPortNumber will
|
|
have the same value as the the corresponding interface's
|
|
InterfaceIndex object.
|
|
|
|
Port numbers should be in the range of 1 and 4096 since a
|
|
particular port is also represented by the corresponding
|
|
port number bit in LldpPortList."
|
|
SYNTAX Integer32(1..4096)
|
|
|
|
LldpPortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight ports,
|
|
with the first octet specifying ports 1 through 8, the second
|
|
octet specifying ports 9 through 16, etc. Within each octet,
|
|
the most significant bit represents the lowest numbered port,
|
|
and the least significant bit represents the highest numbered
|
|
port. Thus, each port of the system is represented by a
|
|
single bit within the value of this object. If that bit has
|
|
a value of '1' then that port is included in the set of ports;
|
|
the port is not included if its bit has a value of '0'."
|
|
REFERENCE
|
|
"RFC 2674, Section 5"
|
|
SYNTAX OCTET STRING(SIZE(0..512))
|
|
|
|
TimeFilter ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
|
|
|
|
|
|
"To be used for the index to a table. Allows an application
|
|
to download only those rows changed since a particular time.
|
|
A row is considered changed if the value of any object in the
|
|
row changes or if the row is created or deleted.
|
|
|
|
When sysUpTime is equal to zero, this table shall be empty.
|
|
|
|
One entry exists for each past value of sysUpTime, except that
|
|
the whole table is purged should sysUpTime wrap.
|
|
|
|
As this basic row is updated new conceptual rows are created
|
|
(which still share the now updated object values with all
|
|
other instances). The number of instances which are created
|
|
is determined by the value of sysUpTime at which the basic row
|
|
was last updated. One instance will exist for each value of
|
|
sysUpTime at the last update time for the row. A new
|
|
timeMark instance is created for each new sysUpTime value.
|
|
Each new conceptual row will be associated with the timeMark
|
|
instance which was created at the value of sysUpTime with
|
|
which the conceptual row is to be associated.
|
|
|
|
By definition all conceptual rows were updated at or after
|
|
time zero and so at least one conceptual row (associated with
|
|
timeMark.0) must exist for each underlying (basic) row.
|
|
|
|
See the appendix for further discussion of this variable.
|
|
|
|
Consider the following fooTable:
|
|
|
|
fooTable ...
|
|
INDEX { fooTimeMark, fooIndex }
|
|
|
|
FooEntry {
|
|
fooTimeMark TimeFilter
|
|
fooIndex INTEGER,
|
|
fooCounts Counter
|
|
}
|
|
|
|
Should there be two basic rows in this table (fooIndex == 1,
|
|
fooIndex == 2) and row 1 was updated most recently at time 6,
|
|
while row 2 was updated most recently at time 8, and both rows
|
|
had been updated on several earlier occasions such that the
|
|
current values were 5 and 9 respectively then the following
|
|
fooCounts instances would exist.
|
|
|
|
fooCounts.0.1 5
|
|
fooCounts.0.2 9
|
|
fooCounts.1.1 5
|
|
|
|
|
|
|
|
|
|
|
|
fooCounts.1.2 9
|
|
fooCounts.2.1 5
|
|
fooCounts.2.2 9
|
|
fooCounts.3.1 5
|
|
fooCounts.3.2 9
|
|
fooCounts.4.1 5
|
|
fooCounts.4.2 9
|
|
fooCounts.5.1 5
|
|
fooCounts.5.2 9
|
|
fooCounts.6.1 5
|
|
fooCounts.6.2 9
|
|
fooCounts.7.2 9 -- note that row 1 doesn't exist for
|
|
fooCounts.8.2 9 -- times 7 and 8"
|
|
SYNTAX TimeTicks
|
|
|
|
Ipv6Address ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "2x:"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This data type is used to model IPv6 addresses.
|
|
This is a binary string of 16 octets in network
|
|
byte-order."
|
|
SYNTAX OCTET STRING (SIZE (16))
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
accton OBJECT IDENTIFIER ::= { enterprises 259 }
|
|
snmpMgt OBJECT IDENTIFIER ::= { accton 8 }
|
|
cheetahSwitchMgt OBJECT IDENTIFIER ::= { snmpMgt 1 }
|
|
|
|
es4626-50 OBJECT IDENTIFIER ::= { cheetahSwitchMgt 2 }
|
|
os OBJECT IDENTIFIER ::= { es4626-50 100 }
|
|
notifications OBJECT IDENTIFIER ::= { es4626-50 101 }
|
|
conformance OBJECT IDENTIFIER ::= { es4626-50 102 }
|
|
|
|
|
|
--xxx.100.1
|
|
priSystem OBJECT IDENTIFIER ::= { os 1 }
|
|
--xxx.100.2
|
|
priSpanningTree OBJECT IDENTIFIER ::= { os 2 }
|
|
--xxx.100.3
|
|
priPorts OBJECT IDENTIFIER ::= { os 3 }
|
|
--xxx.100.4
|
|
priIpConfig OBJECT IDENTIFIER ::= { os 4 }
|
|
--xxx.100.5
|
|
priVlanConfig OBJECT IDENTIFIER ::= { os 5 }
|
|
--xxx.100.6
|
|
priJumblyStacking OBJECT IDENTIFIER ::= { os 6 }
|
|
--xxx.100.7
|
|
priUamSecurityPortMib OBJECT IDENTIFIER ::= { os 7 }
|
|
--xxx.100.8
|
|
priIgmpSnoopingMib OBJECT IDENTIFIER ::= { os 8 }
|
|
--xxx.100.9
|
|
priQinQmib OBJECT IDENTIFIER ::= { os 9 }
|
|
--xxx.100.10
|
|
prisecurity OBJECT IDENTIFIER ::= { os 10 }
|
|
--xxx.100.11
|
|
priQos OBJECT IDENTIFIER ::= { os 11 }
|
|
--xxx.100.12
|
|
primirror OBJECT IDENTIFIER ::= { os 12 }
|
|
--xxx.100.13
|
|
pridhcp OBJECT IDENTIFIER ::= { os 13 }
|
|
--xxx.100.14
|
|
priportGroup OBJECT IDENTIFIER ::= { os 14 }
|
|
--xxx.100.15
|
|
prisnmpMgt OBJECT IDENTIFIER ::= { os 15 }
|
|
--xxx.100.16
|
|
l3 OBJECT IDENTIFIER ::= { os 16 }
|
|
--xxx.100.17
|
|
sntpMgt OBJECT IDENTIFIER ::= { os 17 }
|
|
--xxx.100.18
|
|
urpf OBJECT IDENTIFIER ::= { os 18 }
|
|
--xxx.100.20
|
|
|
|
dcscm OBJECT IDENTIFIER ::= { os 20 }
|
|
--xxx.100.21
|
|
dcscm6 OBJECT IDENTIFIER ::= { os 21 }
|
|
--xxx.100.22
|
|
prClusterv2 OBJECT IDENTIFIER ::= { os 22 }
|
|
--xxx.100.23
|
|
dns OBJECT IDENTIFIER ::= { os 23 }
|
|
--xxx.100.24
|
|
lldpMIB OBJECT IDENTIFIER ::= { os 24 }
|
|
--xxx.100.25
|
|
ntpSnmpMIB OBJECT IDENTIFIER ::= { os 25 }
|
|
--xxx.100.26
|
|
priPoeConfig OBJECT IDENTIFIER ::= { os 26 }
|
|
--xxx.100.27
|
|
priQos2 OBJECT IDENTIFIER ::= { os 27 }
|
|
|
|
--xxx.100.28
|
|
mabMgt OBJECT IDENTIFIER ::= { os 28 }
|
|
|
|
lldpNotifications OBJECT IDENTIFIER ::= { lldpMIB 0 }
|
|
lldpObjects OBJECT IDENTIFIER ::= { lldpMIB 1 }
|
|
lldpConformance OBJECT IDENTIFIER ::= { lldpMIB 2 }
|
|
|
|
--
|
|
-- LLDP MIB Objects
|
|
--
|
|
|
|
lldpConfiguration OBJECT IDENTIFIER ::= { lldpObjects 1 }
|
|
lldpStatistics OBJECT IDENTIFIER ::= { lldpObjects 2 }
|
|
lldpLocalSystemData OBJECT IDENTIFIER ::= { lldpObjects 3 }
|
|
lldpRemoteSystemsData OBJECT IDENTIFIER ::= { lldpObjects 4 }
|
|
lldpExtensions OBJECT IDENTIFIER ::= { lldpObjects 5 }
|
|
|
|
--
|
|
ntpSnmpMIBObjects OBJECT IDENTIFIER ::= { ntpSnmpMIB 1 }
|
|
|
|
-- MIB contains 6 groups
|
|
|
|
ntpEntInfo OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 1 }
|
|
ntpEntStatus OBJECT IDENTIFIER ::= { ntpSnmpMIBObjects 2 }
|
|
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
-- (xxx.100.1) System group
|
|
|
|
--xxx.100.1.1
|
|
sysResetUnit OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noReset(1),
|
|
setfactory (2),
|
|
coldReset (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" setfactory(2)
|
|
coldReset(3)
|
|
noReset(1)
|
|
default the status is 1 "
|
|
::= { priSystem 1}
|
|
|
|
--xxx.100.1.2
|
|
sysHardwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version information of switch hardware "
|
|
::= { priSystem 2 }
|
|
|
|
--xxx.100.1.3
|
|
sysSoftwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version information of switch software "
|
|
::= { priSystem 3 }
|
|
|
|
--xxx.100.1.4
|
|
sysStackFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stack(1),
|
|
noStack (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If it is the status of stacking"
|
|
::= { priSystem 4 }
|
|
|
|
--xxx.100.1.5
|
|
sysCPUMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC Address is used for switch data transfers"
|
|
::= { priSystem 5 }
|
|
|
|
--xxx.100.1.6
|
|
sysWriteConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
write(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"write(1)save the current configuration"
|
|
::= { priSystem 6 }
|
|
|
|
--xxx.100.1.7
|
|
sysPowerStateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SysPowerStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the power supply status is only used for chassis switch"
|
|
::= { priSystem 7}
|
|
|
|
--xxx.100.1.7.1
|
|
sysPowerStateEntry OBJECT-TYPE
|
|
SYNTAX SysPowerStateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"power supply status"
|
|
INDEX { sysPowerSlotIndex }
|
|
::= { sysPowerStateTable 1 }
|
|
|
|
SysPowerStateEntry
|
|
::= SEQUENCE
|
|
{
|
|
sysPowerSlotIndex INTEGER,
|
|
sysPowerState INTEGER,
|
|
sysPowerValue INTEGER,
|
|
sysPowerType INTEGER,
|
|
sysPowerStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.1.7.1.1
|
|
sysPowerSlotIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Module model No."
|
|
::= { sysPowerStateEntry 1 }
|
|
|
|
--xxx.100.1.7.1.2
|
|
sysPowerState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sysPowerInstalled(1),
|
|
sysPowerNotInstalled(0)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "if the power supply insert"
|
|
::= { sysPowerStateEntry 2 }
|
|
|
|
--xxx.100.1.7.1.3
|
|
sysPowerValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Power Value"
|
|
::= { sysPowerStateEntry 3 }
|
|
|
|
--xxx.100.1.7.1.4
|
|
sysPowerType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
systemPower(0),
|
|
poePower(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Power Type"
|
|
::= { sysPowerStateEntry 4 }
|
|
|
|
--xxx.100.1.7.1.5
|
|
sysPowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(0),
|
|
abnormal(1),
|
|
na(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Power Status"
|
|
::= { sysPowerStateEntry 5 }
|
|
|
|
--xxx.100.1.8
|
|
sysSlotTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SysSlotEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"machine information,it is only used by chassis."
|
|
::= { priSystem 8}
|
|
|
|
--xxx.100.1.8.1
|
|
sysSlotEntry OBJECT-TYPE
|
|
SYNTAX SysSlotEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Switch information"
|
|
INDEX { sysSlotIndex }
|
|
::= { sysSlotTable 1 }
|
|
|
|
SysSlotEntry
|
|
::= SEQUENCE
|
|
{
|
|
sysSlotIndex INTEGER,
|
|
sysCPUType DisplayString,
|
|
sysCPUFiveSecondIdle INTEGER,
|
|
sysCPUThirtySecondIdle INTEGER,
|
|
sysCPUFiveMinuteIdle INTEGER,
|
|
sysCPUIdle INTEGER,
|
|
sysMemorySize INTEGER,
|
|
sysMemoryBusy INTEGER,
|
|
sysFlashSize INTEGER,
|
|
sysTemperature INTEGER,
|
|
sysCpuUsage INTEGER
|
|
}
|
|
|
|
--xxx.100.1.8.1.1
|
|
sysSlotIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Module Model No."
|
|
::= { sysSlotEntry 1 }
|
|
|
|
--xxx.100.1.8.1.2
|
|
sysCPUType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CPU type"
|
|
::= { sysSlotEntry 2}
|
|
|
|
--xxx.100.1.8.1.3
|
|
sysCPUFiveSecondIdle OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last 5 second CPU IDLE"
|
|
::= { sysSlotEntry 3 }
|
|
|
|
--xxx.100.1.8.1.4
|
|
sysCPUThirtySecondIdle OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last 30 second CPU IDLE"
|
|
::= { sysSlotEntry 4 }
|
|
|
|
--xxx.100.1.8.1.5
|
|
sysCPUFiveMinuteIdle OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last 5 minute CPU IDLE"
|
|
::= { sysSlotEntry 5 }
|
|
|
|
--xxx.100.1.8.1.6
|
|
sysCPUIdle OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"From running CPU IDLE"
|
|
::= { sysSlotEntry 6 }
|
|
|
|
--xxx.100.1.8.1.7
|
|
sysMemorySize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"memory size"
|
|
::= { sysSlotEntry 7 }
|
|
|
|
--xxx.100.1.8.1.8
|
|
sysMemoryBusy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"memory usage rent"
|
|
::= { sysSlotEntry 8 }
|
|
|
|
--xxx.100.1.8.1.9
|
|
sysFlashSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flash capacity of this slot."
|
|
::= { sysSlotEntry 9 }
|
|
|
|
--xxx.100.1.8.1.10
|
|
sysTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Temperature of this slot.80 is 80centigrade"
|
|
::= { sysSlotEntry 10 }
|
|
|
|
--xxx.100.1.8.1.11
|
|
sysCpuUsage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CPU usage of this slot."
|
|
::= { sysSlotEntry 11 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.1.9
|
|
switchInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwitchInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive and status information about
|
|
switches in this system."
|
|
::= { priSystem 9 }
|
|
|
|
--xxx.100.1.9.1
|
|
switchInfoEntry OBJECT-TYPE
|
|
SYNTAX SwitchInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing information
|
|
about a single switch in this system."
|
|
INDEX { swSlotIndex , swUnitIndex }
|
|
::= { switchInfoTable 1 }
|
|
|
|
SwitchInfoEntry ::= SEQUENCE
|
|
{
|
|
swSlotIndex INTEGER,
|
|
swUnitIndex INTEGER,
|
|
swModuleType INTEGER
|
|
}
|
|
|
|
--xxx.100.1.9.1.1
|
|
swSlotIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the slot within the switch
|
|
for which this entry contains information.
|
|
While for the chassis device, the value is real switch slot number."
|
|
::= { switchInfoEntry 1 }
|
|
|
|
--xxx.100.1.9.1.2
|
|
swUnitIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the switch within the system
|
|
for which this entry contains information. This
|
|
value can never be greater than switchNumber."
|
|
::= { switchInfoEntry 2 }
|
|
|
|
--xxx.100.1.9.1.3
|
|
swModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
typeMFC(0),
|
|
typeSFC(1),
|
|
type1GS(2),
|
|
type1GL(3),
|
|
type100M1GT(4),
|
|
type10M100MT(8),
|
|
type1-M12GB(101),
|
|
type1-12GT(102),
|
|
type1-210Gx(103),
|
|
type1-110Gx(104),
|
|
type1-CPU8245(105),
|
|
type1-BACKPLANE(106),
|
|
type1-24GB(107),
|
|
type1-24GT(108),
|
|
type1-36TX(109),
|
|
type1-4GX32TX(110),
|
|
type1-16FX(111),
|
|
type1-ES2GB(112),
|
|
type1-M4GX24TX(113),
|
|
type1-ES(114),
|
|
type1-MI(115),
|
|
type1-MII(116),
|
|
type1-12GB(117),
|
|
type1-M8GB(118),
|
|
type1-2XFP8GX16GB(119),
|
|
type1-8GX16GB(120),
|
|
type1-4GX24TX(121),
|
|
type1-L-M4GX24TX(122),
|
|
type1-1XFP8GX16GB(123),
|
|
type1-2XFP12GX12GT(124),
|
|
type1-12GX12GT(125),
|
|
type1-1XFP12GX12GT(126),
|
|
type1-48GT(127),
|
|
type1-M1XFP12GX12GT(128),
|
|
type1-4XFP(129),
|
|
type1-48GB(130),
|
|
type1-M44GT(131),
|
|
type1-M1XFP12GX12GB(132),
|
|
type1-12GX12GB(133),
|
|
type1-2XFP12GX12GB(134),
|
|
type1-2XFP24GB12GT(136),
|
|
type1-24GB12GT(137),
|
|
type1-NEWMI(138),
|
|
type1-M1XFP12GX12GTR4(139),
|
|
type1-12GX12GTR4(140),
|
|
type1-2XFP12GX12GTR4(141),
|
|
type2-M12GB(165),
|
|
type2-12GT(166),
|
|
type2-210Gx(167),
|
|
type2-110Gx(168),
|
|
type2-CPU8245(169),
|
|
type2-BACKPLANE(170),
|
|
type2-24GB(171),
|
|
type2-24GT(172),
|
|
type2-36TX(173),
|
|
type2-4GX32TX(174),
|
|
type2-16FX(175),
|
|
type2-ES2GB(176),
|
|
type2-M4GX24TX(177),
|
|
type2-ES(178),
|
|
type2-MI(179),
|
|
type2-MII(180),
|
|
type2-12GB(181),
|
|
type2-M8GB(182),
|
|
type2-2XFP8GX16GB(183),
|
|
type2-8GX16GB(184),
|
|
type2-4GX24TX(185),
|
|
type2-L-M4GX24TX(186),
|
|
type2-1XFP8GX16GB(187),
|
|
type2-2XFP12GX12GT(188),
|
|
type2-12GX12GT(189),
|
|
type2-1XFP12GX12GT(190),
|
|
type2-48GT(191),
|
|
type2-M1XFP12GX12GT(192),
|
|
type2-4XFP(193),
|
|
type2-48GB(194),
|
|
type2-M44GT(195),
|
|
type2-M1XFP12GX12GB(196),
|
|
type2-12GX12GB(197),
|
|
type2-2XFP12GX12GB(198),
|
|
type2-2XFP24GB12GT(200),
|
|
type2-24GB12GT(201),
|
|
type2-NEWMI(202),
|
|
type2-M1XFP12GX12GTR4(203),
|
|
type2-12GX12GTR4(204),
|
|
type2-2XFP12GX12GTR4(205),
|
|
type3-M (228),
|
|
type3-MI(229),
|
|
type3-24GT(231),
|
|
type3-24GB(232),
|
|
type3-4XFP(234)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Type of expansion module in this switch slot."
|
|
::= { switchInfoEntry 3 }
|
|
|
|
--xxx.100.1.10
|
|
switchFileCopy OBJECT IDENTIFIER ::= { priSystem 10 }
|
|
|
|
--xxx.100.1.10.1
|
|
fileUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ftp user name"
|
|
::= { switchFileCopy 1 }
|
|
|
|
--xxx.100.1.10.2
|
|
fileUserPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ftp user password"
|
|
::= { switchFileCopy 2 }
|
|
|
|
--xxx.100.1.10.3
|
|
fileIPaddress OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ftp or tftp server ip address"
|
|
::= { switchFileCopy 3 }
|
|
|
|
--xxx.100.1.10.4
|
|
sourceFileCopy OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source file name or Copy from current system configuration
|
|
."
|
|
::= { switchFileCopy 4 }
|
|
|
|
--xxx.100.1.10.5
|
|
destinationFileCopy OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination file name or Copy to startup configuration."
|
|
::= { switchFileCopy 5 }
|
|
|
|
--xxx.100.1.10.6
|
|
fileCopyMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ascii(0),
|
|
binary(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ascii(0): ASCII file mode;
|
|
binary(1): Binary file mode."
|
|
::= { switchFileCopy 6 }
|
|
|
|
--xxx.100.1.10.7
|
|
fileCopyUseMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ftp(1),
|
|
tftp(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ftp(1): ftp server or client;
|
|
tftp(2): tftp server or client."
|
|
::= { switchFileCopy 7 }
|
|
|
|
--xxx.100.1.10.8
|
|
fileCopy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
upload(1),
|
|
download(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"File copy configurate."
|
|
::= { switchFileCopy 8 }
|
|
|
|
--xxx.100.1.10.9
|
|
fileCopyResult OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
error(0),
|
|
ok(1),
|
|
uploading(2),
|
|
downloading(3),
|
|
idle(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of file copy:error(0):copy file failure;ok(1):copy file success;
|
|
uploading(2):in process of upload file;downloading(3):in process of download file;
|
|
idle(4):be out of copy file."
|
|
::= { switchFileCopy 9 }
|
|
--xxx.100.1.11
|
|
switchInfo OBJECT IDENTIFIER ::= { priSystem 11 }
|
|
|
|
--xxx.100.1.11.1
|
|
switchCPUType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CPU type of switch"
|
|
::= { switchInfo 1}
|
|
|
|
--xxx.100.1.11.2
|
|
switchCPUFiveSecondIdle OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last 5 second CPU IDLE"
|
|
::= { switchInfo 2 }
|
|
|
|
--xxx.100.1.11.3
|
|
switchCPUThirtySecondIdle OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last 30 second CPU IDLE"
|
|
::= { switchInfo 3 }
|
|
|
|
--xxx.100.1.11.4
|
|
switchCPUFiveMinuteIdle OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last 5 minute CPU IDLE"
|
|
::= { switchInfo 4 }
|
|
|
|
--xxx.100.1.11.5
|
|
switchCPUIdle OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"From running CPU IDLE"
|
|
::= { switchInfo 5 }
|
|
|
|
--xxx.100.1.11.6
|
|
switchMemorySize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"memory size"
|
|
::= { switchInfo 6 }
|
|
|
|
--xxx.100.1.11.7
|
|
switchMemoryBusy OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"memory usage rent"
|
|
::= { switchInfo 7 }
|
|
|
|
--xxx.100.1.11.8
|
|
switchFlashSize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flash capacity of switch."
|
|
::= { switchInfo 8 }
|
|
|
|
--xxx.100.1.11.9
|
|
switchTemperature OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Temperature of switch.80 is 80centigrade"
|
|
::= { switchInfo 9 }
|
|
|
|
--xxx.100.1.11.10
|
|
switchCpuUsage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CPU usage of switch."
|
|
::= { switchInfo 10 }
|
|
|
|
--xxx.100.1.12
|
|
sysFanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SysFanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" the state of fan."
|
|
::= { priSystem 12}
|
|
|
|
--xxx.100.1.12.1
|
|
sysFanEntry OBJECT-TYPE
|
|
SYNTAX SysFanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "fan supply status"
|
|
INDEX { sysFanIndex }
|
|
::= { sysFanTable 1 }
|
|
|
|
SysFanEntry
|
|
::= SEQUENCE
|
|
{
|
|
sysFanIndex INTEGER,
|
|
sysFanInserted INTEGER,
|
|
sysFanStatus INTEGER,
|
|
sysFanSpeed INTEGER
|
|
}
|
|
|
|
--xxx.100.1.12.1.1.1
|
|
sysFanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "system fan entry index"
|
|
::= { sysFanEntry 1 }
|
|
|
|
--xxx.100.1.12.1.1.2
|
|
sysFanInserted OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sysFanNotInstalled(0),
|
|
sysFanInstalled(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether the slot fan is installed or not."
|
|
::= { sysFanEntry 2 }
|
|
|
|
--xxx.100.1.12.1.1.3
|
|
sysFanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
abnormal(1),
|
|
normal(0)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Whether the slot fan is normal or abnormal."
|
|
::= { sysFanEntry 3 }
|
|
|
|
--xxx.100.1.12.1.1.4
|
|
sysFanSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
low(1),
|
|
medium(2),
|
|
high(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of Fan. Status: Low(1), Medium(2), High(3), none(0) is readonly"
|
|
::= { sysFanEntry 4 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
-- (xxx.100.2) Spanning tree group
|
|
|
|
--xxx.100.2.1
|
|
spanGlobalEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable or disable the Spanning Tree algorithm in the switch."
|
|
::= { priSpanningTree 1 }
|
|
|
|
--********************************************************************************************************
|
|
--xxx.100.2.2
|
|
mstpMgt OBJECT IDENTIFIER ::= { priSpanningTree 2 }
|
|
--xxx.100.2.2.1
|
|
mstpSystemGroup OBJECT IDENTIFIER ::= { mstpMgt 1 }
|
|
--xxx.100.2.2.1.1
|
|
mstpEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the Spanning Tree algorithm in the switch."
|
|
::= { mstpSystemGroup 1 }
|
|
|
|
--xxx.100.2.2.1.2
|
|
mstpTCFlush OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2),
|
|
protect(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configure global style of TC FLUSH"
|
|
::= { mstpSystemGroup 2 }
|
|
--xxx.100.2.2.1.3
|
|
mstpForwardTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This time value, measured in units of hundredths of a second,
|
|
controls how fast a port changes its spanning state when moving
|
|
towards the Forwarding state. The value determines how long the
|
|
port stays in each of the Listening and Learning states, which
|
|
precede the Forwarding state. This value is also used, when a
|
|
topology change has been detected and is underway, to age all
|
|
dynamic entries in the Forwarding Database."
|
|
::= { mstpSystemGroup 3 }
|
|
|
|
--xxx.100.2.2.1.4
|
|
mstpHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time between the transmission of Configuration
|
|
bridge PDUs by this node on any port when it is the root of
|
|
the spanning tree or trying to become so, in units of hundredths
|
|
of a second. This is the actual value that this bridge is currently using."
|
|
::= { mstpSystemGroup 4 }
|
|
|
|
--xxx.100.2.2.1.5
|
|
mstpMaxage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum age of Spanning Tree Protocol information learned
|
|
from the network on any port before it is discarded, in units
|
|
of hundredths of a second. This is the actual value that this
|
|
bridge is currently using."
|
|
::= { mstpSystemGroup 5 }
|
|
|
|
--xxx.100.2.2.1.6
|
|
mstpMaxhop OBJECT-TYPE
|
|
SYNTAX INTEGER (1..40)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"setting global Maxhop of mstp"
|
|
::= { mstpSystemGroup 6 }
|
|
--xxx.100.2.2.1.7
|
|
mstpMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
stp(0),
|
|
rstp(2),
|
|
mstp(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"setting global mode of mstp,stp or rstp"
|
|
::= { mstpSystemGroup 7 }
|
|
|
|
--xxx.100.2.2.1.8
|
|
mstpName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"setting the name of mst"
|
|
::= { mstpSystemGroup 8 }
|
|
--xxx.100.2.2.1.9
|
|
mstpRevisionLevel OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"setting the global revision level of mstp"
|
|
::= { mstpSystemGroup 9 }
|
|
|
|
--xxx.100.2.2.1.10
|
|
mstpBridgeForwardDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (4..30)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"setting global Forwardtime of mstp"
|
|
::= { mstpSystemGroup 10 }
|
|
|
|
--xxx.100.2.2.1.11
|
|
mstpBridgeHelloTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"setting global HelloTime of mstp"
|
|
::= { mstpSystemGroup 11 }
|
|
|
|
--xxx.100.2.2.1.12
|
|
mstpBridgeMaxage OBJECT-TYPE
|
|
SYNTAX INTEGER (6..40)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"setting global Maxage of mstp"
|
|
::= { mstpSystemGroup 12 }
|
|
|
|
--xxx.100.2.2.3
|
|
mstpInstancePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MstpInstancePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" interrelated parameter list of instance and port "
|
|
::= { mstpMgt 3}
|
|
|
|
--xxx.100.2.2.3.1
|
|
mstpInstancePortEntry OBJECT-TYPE
|
|
SYNTAX MstpInstancePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The index of this table is instance ID and port index"
|
|
INDEX { mstpInstancePortInstanceID,mstpInstancePortPortIndex }
|
|
::= { mstpInstancePortTable 1 }
|
|
|
|
MstpInstancePortEntry
|
|
::= SEQUENCE
|
|
{
|
|
mstpInstancePortInstanceID INTEGER,
|
|
mstpInstancePortPortIndex INTEGER,
|
|
mstpInstancePortCost INTEGER,
|
|
mstpInstancePortPriority INTEGER,
|
|
mstpInstancePortRootGuard INTEGER
|
|
}
|
|
|
|
--xxx.100.2.2.3.1.1
|
|
mstpInstancePortInstanceID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" instance ID"
|
|
::= { mstpInstancePortEntry 1 }
|
|
|
|
--xxx.100.2.2.3.1.2
|
|
mstpInstancePortPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "port index"
|
|
::= { mstpInstancePortEntry 2 }
|
|
--xxx.100.2.2.3.1.3
|
|
mstpInstancePortCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..200000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "port cost of port under the special instance"
|
|
::= { mstpInstancePortEntry 3 }
|
|
--xxx.100.2.2.3.1.4
|
|
mstpInstancePortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..240)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "port priority of port under the special instance"
|
|
::= { mstpInstancePortEntry 4 }
|
|
|
|
--xxx.100.2.2.3.1.5
|
|
mstpInstancePortRootGuard OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "rootguard enable/disable on the current instance"
|
|
::= { mstpInstancePortEntry 5 }
|
|
|
|
--xxx.100.2.2.2
|
|
mstpInstanceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MstpInstanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" correlative information list with instance"
|
|
::= { mstpMgt 2}
|
|
|
|
--xxx.100.2.2.2.1
|
|
mstpInstanceEntry OBJECT-TYPE
|
|
SYNTAX MstpInstanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The index of this table is instance ID"
|
|
INDEX { mstpInstanceID}
|
|
::= { mstpInstanceTable 1 }
|
|
|
|
MstpInstanceEntry
|
|
::= SEQUENCE
|
|
{
|
|
mstpInstanceID INTEGER,
|
|
mstpInstanceVlans DisplayString,
|
|
mstpInstanceSwitchPriority INTEGER
|
|
}
|
|
|
|
--xxx.100.2.2.2.1.1
|
|
mstpInstanceID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" instance ID"
|
|
::= { mstpInstanceEntry 1 }
|
|
|
|
--xxx.100.2.2.2.1.2
|
|
mstpInstanceVlans OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..512))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " the map of vlans to instance.The input format is consonant with cli."
|
|
::= { mstpInstanceEntry 2 }
|
|
--xxx.100.2.2.2.1.3
|
|
mstpInstanceSwitchPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..61440)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " The priority of the router in the special instance."
|
|
::= { mstpInstanceEntry 3 }
|
|
|
|
--********************************************************************************************************
|
|
--xxx.100.2.2.4
|
|
mstpPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MstpPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" mstp information list of port"
|
|
::= { mstpMgt 4}
|
|
|
|
--xxx.100.2.2.4.1
|
|
mstpPortInfoEntry OBJECT-TYPE
|
|
SYNTAX MstpPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The index of this table is port index"
|
|
INDEX { mstpPortInfoPortIndex}
|
|
::= { mstpPortInfoTable 1 }
|
|
|
|
MstpPortInfoEntry
|
|
::= SEQUENCE
|
|
{
|
|
mstpPortInfoPortIndex INTEGER,
|
|
mstpPortInfoEnable INTEGER,
|
|
mstpPortLinkType INTEGER,
|
|
mstpPortMcheck INTEGER,
|
|
mstpPortPortFast INTEGER,
|
|
mstpPortFormat INTEGER,
|
|
mstpPortDigestSnp INTEGER,
|
|
mstpPortTCFlush INTEGER
|
|
}
|
|
|
|
--xxx.100.2.2.4.1.1
|
|
mstpPortInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port index"
|
|
::= { mstpPortInfoEntry 1 }
|
|
|
|
--xxx.100.2.2.4.1.2
|
|
mstpPortInfoEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "enable/disable mstp on the port."
|
|
::= { mstpPortInfoEntry 2 }
|
|
|
|
--xxx.100.2.2.4.1.2
|
|
mstpPortLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(2),
|
|
force-true(1),
|
|
force-false(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " the p2p link type of the port"
|
|
::= { mstpPortInfoEntry 3 }
|
|
--xxx.100.2.2.4.1.3
|
|
mstpPortMcheck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
untrigger(0),
|
|
trigger(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "trigger/untrigger"
|
|
::= { mstpPortInfoEntry 4 }
|
|
--xxx.100.2.2.4.1.4
|
|
mstpPortPortFast OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
default(0),
|
|
bpdufilter(1),
|
|
bpduguard(2),
|
|
noportfast(3)-- no spanningtree portfast
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "
|
|
default:the port mode is portfast mode
|
|
bpdufilter:the port mode is portfast mode with bpdufilter
|
|
bpduguard:the port mode is portfast mode with bpduguard
|
|
noportfast:the port mode is not portfast mode"
|
|
::= { mstpPortInfoEntry 5 }
|
|
--xxx.100.2.2.4.1.5
|
|
mstpPortFormat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
standard(0),
|
|
privacy(1),
|
|
auto(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "which mode can be setted up port of message format function"
|
|
::= { mstpPortInfoEntry 6 }
|
|
--xxx.100.2.2.4.1.6
|
|
mstpPortDigestSnp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Whether the port use peer's authentication key"
|
|
::= { mstpPortInfoEntry 7 }
|
|
--xxx.100.2.2.4.1.7
|
|
mstpPortTCFlush OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2),
|
|
protect(3),
|
|
useglobal(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "when topology is changed, how to flush the mac"
|
|
::= { mstpPortInfoEntry 8 }
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
-- (xxx.100.3) Ports group
|
|
|
|
--xxx.100.3.1
|
|
portCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..256)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The total number of ports in the system."
|
|
::= { priPorts 1 }
|
|
|
|
--xxx.100.3.2
|
|
portTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PriPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A list of port entries."
|
|
::= { priPorts 2 }
|
|
|
|
--xxx.100.3.2.1
|
|
priPortEntry OBJECT-TYPE
|
|
SYNTAX PriPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" A port entry containing port information,
|
|
status, and control."
|
|
INDEX { portIndex }
|
|
::= { portTable 1 }
|
|
|
|
PriPortEntry
|
|
::= SEQUENCE
|
|
{
|
|
portIndex INTEGER,
|
|
portName DisplayString,
|
|
switchNum INTEGER,
|
|
slotNum INTEGER,
|
|
portType INTEGER,
|
|
flowControlStatus INTEGER,
|
|
bandwidthControlStatus INTEGER,
|
|
maxBandwidth INTEGER,
|
|
receiveBandwidth INTEGER,
|
|
transmitBandwidth INTEGER,
|
|
-- mdi INTEGER,
|
|
shutdown INTEGER,
|
|
loopback INTEGER,
|
|
speedDuplex INTEGER,
|
|
portMode INTEGER,
|
|
pvid INTEGER,
|
|
indicatesType INTEGER,
|
|
vctAction INTEGER,
|
|
vctLastStatus DisplayString,
|
|
portTrunkAllowedvlan OCTET STRING,
|
|
portHybridTaggedAllowedvlan OCTET STRING,
|
|
portHybridUntaggedAllowedvlan OCTET STRING
|
|
}
|
|
|
|
--xxx.100.3.2.1.1
|
|
portIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port No."
|
|
::= { priPortEntry 1 }
|
|
|
|
|
|
--xxx.100.3.2.1.2
|
|
portName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Name of the port. exp:financial."
|
|
::= { priPortEntry 2 }
|
|
|
|
|
|
--xxx.100.3.2.1.3
|
|
switchNum OBJECT-TYPE
|
|
SYNTAX INTEGER(0..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This value is denoting the number of swith in which this port resides.
|
|
For the non-stackable device,the value is always 1.
|
|
While for the stackable device, the value is real switch stack number."
|
|
::= { priPortEntry 3 }
|
|
|
|
|
|
--xxx.100.3.2.1.4
|
|
slotNum OBJECT-TYPE
|
|
SYNTAX INTEGER(0..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This value is denoting the number of slot.
|
|
For the static slot,the value is 1,while for
|
|
the extended slot the value is real extended slot number."
|
|
::= { priPortEntry 4 }
|
|
|
|
|
|
--xxx.100.3.2.1.5
|
|
portType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
typeSFP(0),
|
|
typeCombo(1),
|
|
typeFiber(2),
|
|
typeSingleOptFE(3), --modify 04/9/9
|
|
typeMultiOptFE(4),
|
|
typeElecFE(5),
|
|
typeSingleOptGE(6),
|
|
typeMultiOptGE(7),
|
|
typeElecGE(8),
|
|
typePortAGG(9),
|
|
typePortUsbGE(10),
|
|
typeOptXge(11),
|
|
other(255)--modify 03/1/21
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Type of expansion module in this port."
|
|
::= { priPortEntry 5 }
|
|
|
|
--------------------------------------------------------------------------
|
|
-- New requirement begins
|
|
--------------------------------------------------------------------------
|
|
--xxx.100.3.2.1.6
|
|
flowControlStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flow-control status of the port.
|
|
Its functionality is exactly same as 'flow control' or 'no flow control' commands
|
|
in console mode."
|
|
::= { priPortEntry 6 }
|
|
|
|
--xxx.100.3.2.1.7
|
|
bandwidthControlStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ingress(0),
|
|
egress(1),
|
|
both(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bandwidth-control status of the port.
|
|
Its functionality is to stop the bandwidth control.
|
|
The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith."
|
|
::= { priPortEntry 7 }
|
|
|
|
--xxx.100.3.2.1.8
|
|
maxBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
default(0),
|
|
bw100M(1),
|
|
bw1000M(2),
|
|
bw10000M(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The max bandwidth of the port."
|
|
::= { priPortEntry 8 }
|
|
|
|
--xxx.100.3.2.1.9
|
|
receiveBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The recevice bandwidth of the port. Its unit is kbs.
|
|
The command 'bandwidth control 50 both' in console mode equals
|
|
setting both receiveBandwidth and transmitBandwidth to 50 kbs.
|
|
Set 0 is no bandwidth."
|
|
::= { priPortEntry 9 }
|
|
|
|
--xxx.100.3.2.1.10
|
|
transmitBandwidth OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit bandwidth of the port. Its unit is kbs.
|
|
Set 0 is no bandwidth."
|
|
::= { priPortEntry 10 }
|
|
|
|
--xxx.100.3.2.1.11
|
|
-- mdi OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- auto(0),
|
|
-- across(1),
|
|
-- normal(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Establish to specify the on-line type of the port;
|
|
-- Exchange the every kind of plank card of machine
|
|
-- of thousand trillion this order of above port nonsupport."
|
|
-- ::= { priPortEntry 11 }
|
|
|
|
--xxx.100.3.2.1.12
|
|
shutdown OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
shutDown(0),
|
|
noshutdown(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Close or open to specify the port."
|
|
::= { priPortEntry 12 }
|
|
|
|
--xxx.100.3.2.1.13
|
|
loopback OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noloopback(0),
|
|
loopback(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Open or close to specify the wreath of
|
|
the port back to test the function."
|
|
::= { priPortEntry 13 }
|
|
|
|
--xxx.100.3.2.1.14
|
|
speedDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(0),
|
|
half10(1),
|
|
full10(2),
|
|
half100(3),
|
|
full100(4),
|
|
half1000(5),
|
|
full1000(6),
|
|
fx-100(13)
|
|
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The speed and duplex status of the port."
|
|
::= { priPortEntry 14 }
|
|
|
|
--xxx.100.3.2.1.15
|
|
portMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
access(1),
|
|
trunk(2),
|
|
hybrid(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port mode: 1 is access,2 is trunk,3 is hybrid"
|
|
::= { priPortEntry 15 }
|
|
|
|
--xxx.100.3.2.1.16
|
|
pvid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port of native vlan No."
|
|
::= { priPortEntry 16 }
|
|
|
|
--xxx.100.3.2.1.17
|
|
indicatesType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
other(1),
|
|
hundredBaseTX(2),
|
|
hundredBaseFX(3),
|
|
thousandBaseSX(4),
|
|
thousandBaseLX(5),
|
|
thousandBaseT(6),
|
|
thousandBaseGBIC(7),
|
|
thousandBaseSfp(8),
|
|
hundredBaseFxScSingleMode(9),
|
|
hundredBaseFxScMultiMode(10),
|
|
thousandBaseCX(11),
|
|
tenG(12)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the port type of the configuration of the switch."
|
|
::= { priPortEntry 17 }
|
|
--xxx.100.3.2.1.18
|
|
vctAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "This object indicates the VCT action of the port,only the value 1 is permitted
|
|
when SET this entry though you can GET 1(processing) and 0(succeed);
|
|
The specified port will be shutdown when one sets 1 to this entry,and then it will return
|
|
to no shutdown after operate the virtual-cable-test. You can get the status of VCT from
|
|
the entry vctLastStatus."
|
|
::= { priPortEntry 18 }
|
|
--xxx.100.3.2.1.19
|
|
vctLastStatus OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..1000))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Indicates the last VCT status of the port."
|
|
::= { priPortEntry 19 }
|
|
|
|
--xxx.100.3.2.1.20
|
|
portTrunkAllowedvlan OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"trunk port allowed vlan list string"
|
|
::= { priPortEntry 20 }
|
|
|
|
--xxx.100.3.2.1.21
|
|
portHybridTaggedAllowedvlan OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"hybrid port tagged allowed vlan list string"
|
|
::= { priPortEntry 21 }
|
|
|
|
--xxx.100.3.2.1.22
|
|
portHybridUntaggedAllowedvlan OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..100))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"hybrid port untagged allowed vlan list string"
|
|
::= { priPortEntry 22 }
|
|
|
|
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.4 priIpConfig
|
|
|
|
--***************************************
|
|
|
|
--xxx.100.4.1
|
|
netDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address of the default gateway. If this value is
|
|
undefined or unknown, it shall have the value 0.0.0.0."
|
|
::= { priIpConfig 1 }
|
|
|
|
--xxx.100.4.2
|
|
ipHttpState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Web server on-off."
|
|
::= { priIpConfig 2 }
|
|
|
|
--xxx.100.4.3
|
|
iPAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IPAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of iPAddrEntry."
|
|
::= { priIpConfig 3 }
|
|
|
|
--xxx.100.4.3.1
|
|
iPAddrEntry OBJECT-TYPE
|
|
SYNTAX IPAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A set of configuration parameters for a particular
|
|
network interface on this device. If the device has no network
|
|
interface, this table is empty.
|
|
|
|
The index is composed of the ifIndex assigned to the
|
|
corresponding interface."
|
|
INDEX { iPAddrVid , iPAddrIPAddress }
|
|
::= { iPAddrTable 1 }
|
|
|
|
IPAddrEntry ::= SEQUENCE
|
|
{
|
|
iPAddrVid INTEGER,
|
|
iPAddrIPAddress IpAddress,
|
|
iPAddrSubnetMask IpAddress,
|
|
iPAddrPrimaryInterface INTEGER,
|
|
iPAddrStatus INTEGER
|
|
}
|
|
--xxx.100.4.3.1.1
|
|
iPAddrVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The VLAN interface being used by this table entry. Only the
|
|
VLAN interfaces which have an IP configured will appear in
|
|
the table."
|
|
::= { iPAddrEntry 1 }
|
|
|
|
--xxx.100.4.3.1.2
|
|
iPAddrIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this Net interface. The default value
|
|
for this object is 0.0.0.0. If either the IPAddrIPAddress
|
|
or IPAddrSubnetMask is 0.0.0.0, then when the device
|
|
boots, it may use BOOTP to try to figure out what these
|
|
values should be. If BOOTP fails, before the device
|
|
can talk on the network, this value must be configured
|
|
(e.g., through a terminal attached to the device)."
|
|
::= { iPAddrEntry 2 }
|
|
|
|
--xxx.100.4.3.1.3
|
|
iPAddrSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subnet mask of this Net interface. The default value
|
|
for this object is 0.0.0.0. If either the IPAddrIPAddress
|
|
or IPAddrSubnetMask are 0.0.0.0, then when the device
|
|
boots, it may use BOOTP to try to figure out what these
|
|
values should be. If BOOTP fails, before the device
|
|
can talk on the network, this value must be configured
|
|
(e.g., through a terminal attached to the device)."
|
|
::= { iPAddrEntry 3 }
|
|
|
|
--xxx.100.4.3.1.4
|
|
iPAddrPrimaryInterface OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
primary(0),
|
|
secondary(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether this is a primary interface."
|
|
::= { iPAddrEntry 4 }
|
|
|
|
--xxx.100.4.3.1.5
|
|
iPAddrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Now state."
|
|
::= { iPAddrEntry 5 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.4.4
|
|
interfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table of interfaceEntry."
|
|
::= { priIpConfig 4 }
|
|
|
|
--xxx.100.5.1.1
|
|
interfaceEntry OBJECT-TYPE
|
|
SYNTAX InterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A set of configuration parameters for a particular
|
|
network interface on this device. If the device has no network
|
|
interface, this table is empty.
|
|
|
|
The index is composed of the ifIndex assigned to the
|
|
corresponding interface."
|
|
INDEX { intfacetype , intfaceID }
|
|
::= { interfaceTable 1 }
|
|
|
|
InterfaceEntry ::= SEQUENCE
|
|
{
|
|
intfacetype INTEGER,
|
|
intfaceID INTEGER,
|
|
intfaceIndex INTEGER,
|
|
-- intfaceAddressMethod INTEGER,
|
|
intfaceStatus INTEGER
|
|
}
|
|
|
|
intfacetype OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
vintf(1),
|
|
loopback(2),
|
|
tunnel(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The Type of interface.
|
|
Now support(1)vintf and (2)loopback."
|
|
::= { interfaceEntry 1 }
|
|
|
|
intfaceID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Number of interface.
|
|
exp:intfacetype(1),interfaceID(2) means interface vlan 2.
|
|
if intfacetype(2) interfaceID(4) means interface loopback4.
|
|
if intfacetype(3) interfaceID(5) means interface Tunnel5."
|
|
::= { interfaceEntry 2 }
|
|
|
|
intfaceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Index of interface."
|
|
::= { interfaceEntry 3 }
|
|
|
|
--intfaceAddressMethod OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- {
|
|
-- user(0),
|
|
-- dhcp(1),
|
|
-- bootp(2)
|
|
-- }
|
|
-- MAX-ACCESS read-create
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Method to get the IP address.
|
|
-- When intfacetype(2/3) intfaceAddressMethod must be user()."
|
|
-- ::= { interfaceEntry 4 }
|
|
|
|
intfaceStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Now state."
|
|
::= { interfaceEntry 5 }
|
|
|
|
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.5 vlanConfig
|
|
|
|
--***************************************
|
|
--vlaninfotable
|
|
--***************************************
|
|
|
|
--xxx.100.5.1
|
|
vlanInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A table containing current configuration information
|
|
for each VLAN currently configured into the device by
|
|
(local or network) management."
|
|
::= { priVlanConfig 1 }
|
|
|
|
--xxx.100.5.1.1
|
|
vlanInfoEntry OBJECT-TYPE
|
|
SYNTAX VlanInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Static information for a VLAN configured into the
|
|
device by (local or network) management."
|
|
INDEX { vlanID }
|
|
::= { vlanInfoTable 1 }
|
|
|
|
VlanInfoEntry ::= SEQUENCE
|
|
{
|
|
vlanID INTEGER,
|
|
vlanName DisplayString,
|
|
vlanPortNumber INTEGER,
|
|
vlanRowStatus INTEGER
|
|
}
|
|
|
|
|
|
--xxx.100.5.1.1.1
|
|
vlanID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This value is vlan's ID."
|
|
::= { vlanInfoEntry 1 }
|
|
|
|
--xxx.100.5.1.1.2
|
|
vlanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "which may be used to identify the VLAN."
|
|
::= { vlanInfoEntry 2 }
|
|
|
|
--xxx.100.5.1.1.3
|
|
vlanPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The sum of vlan's ports."
|
|
::= { vlanInfoEntry 3 }
|
|
|
|
--xxx.100.5.1.1.4
|
|
vlanRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { vlanInfoEntry 4 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.6 jumblyStacking
|
|
|
|
--xxx.100.6.1
|
|
sysStackUnitNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" the number of the stacked units."
|
|
::= { priJumblyStacking 1 }
|
|
|
|
--xxx.100.6.2
|
|
jumblyStackingInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JumblyStackingInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive and status information about
|
|
jumbly stacking in this system."
|
|
::= { priJumblyStacking 2 }
|
|
|
|
--xxx.100.6.1.1
|
|
jumblyStackingInfoEntry OBJECT-TYPE
|
|
SYNTAX JumblyStackingInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing information
|
|
about stacking switch in this system."
|
|
INDEX { swUnitIndex }
|
|
::= { jumblyStackingInfoTable 1 }
|
|
|
|
JumblyStackingInfoEntry ::= SEQUENCE
|
|
{
|
|
stackingUnitIndex INTEGER,
|
|
swHardwareVersion DisplayString,
|
|
swSoftwareVersion DisplayString,
|
|
swCPUMac MacAddress,
|
|
swType DisplayString
|
|
}
|
|
|
|
--xxx.100.6.1.1.1
|
|
stackingUnitIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object identifies the switch within the system
|
|
for which this entry contains information. This
|
|
value can never be greater than switchNumber."
|
|
::= { jumblyStackingInfoEntry 1 }
|
|
|
|
--xxx.100.6.1.1.2
|
|
swHardwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The text string denoting the version of the hardware."
|
|
::= { jumblyStackingInfoEntry 2 }
|
|
|
|
--xxx.100.6.1.1.3
|
|
swSoftwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The text string denoting the version of the software."
|
|
::= { jumblyStackingInfoEntry 3 }
|
|
|
|
--xxx.100.6.1.1.4
|
|
swCPUMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" the Mac address of the machine."
|
|
::= { jumblyStackingInfoEntry 4 }
|
|
|
|
--xxx.100.6.1.1.5
|
|
swType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Type of this switch."
|
|
::= { jumblyStackingInfoEntry 5 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.7 uamSecurityPortMib
|
|
|
|
--xxx.100.7.1
|
|
portSecurityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table of port security "
|
|
::= { priUamSecurityPortMib 1 }
|
|
|
|
--xxx.100.7.1.1
|
|
portSecurityEntry OBJECT-TYPE
|
|
SYNTAX PortSecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the port security table."
|
|
INDEX { psPortIndex }
|
|
::= { portSecurityTable 1 }
|
|
|
|
PortSecurityEntry ::= SEQUENCE
|
|
{
|
|
psPortIndex INTEGER,
|
|
psPortSecurity INTEGER,
|
|
psSecuritytSaticMacAdd MacAddress,
|
|
psSecurityStaticMacDel MacAddress,
|
|
psSecurityPortLock INTEGER,
|
|
psSecurityPortMax INTEGER,
|
|
psSecurityPortConvertmac INTEGER,
|
|
psSecurityPortLocktimer INTEGER
|
|
}
|
|
|
|
--xxx.100.7.1.1.1
|
|
psPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A unique value for each port"
|
|
::= { portSecurityEntry 1 }
|
|
|
|
--xxx.100.7.1.1.2
|
|
psPortSecurity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "enable or disable mac bind on this port"
|
|
::= { portSecurityEntry 2 }
|
|
|
|
--xxx.100.7.1.1.3
|
|
psSecuritytSaticMacAdd OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "bind Security mac address on this port"
|
|
::= { portSecurityEntry 3 }
|
|
|
|
--xxx.100.7.1.1.4
|
|
psSecurityStaticMacDel OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "delete Security mac address on this port"
|
|
::= { portSecurityEntry 4 }
|
|
|
|
--xxx.100.7.1.1.5
|
|
psSecurityPortLock OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
unlock(0),
|
|
lock(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "lock or unlock this port"
|
|
::= { portSecurityEntry 5 }
|
|
|
|
--xxx.100.7.1.1.6
|
|
psSecurityPortMax OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Maximum secure addrs on this port"
|
|
::= { portSecurityEntry 6 }
|
|
|
|
--xxx.100.7.1.1.7
|
|
psSecurityPortConvertmac OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "convert dynamic mac to security mac"
|
|
::= { portSecurityEntry 7 }
|
|
|
|
--xxx.100.7.1.1.8
|
|
psSecurityPortLocktimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "lock timer on this port"
|
|
::= { portSecurityEntry 8 }
|
|
|
|
--xxx.100.7.2
|
|
securityMacPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SecurityMacPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Table of descriptive and status information about security port"
|
|
::= { priUamSecurityPortMib 2 }
|
|
|
|
--xxx.100.7.2.1
|
|
securityMacPortEntry OBJECT-TYPE
|
|
SYNTAX SecurityMacPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the security mac port table."
|
|
INDEX { secPortIndex , secMacAdress }
|
|
::= { securityMacPortTable 1 }
|
|
|
|
SecurityMacPortEntry ::= SEQUENCE
|
|
{
|
|
secPortIndex INTEGER,
|
|
secMacAdress MacAddress,
|
|
secVid INTEGER
|
|
}
|
|
|
|
--xxx.100.7.2.1.1
|
|
secPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A unique value for each port"
|
|
::= { securityMacPortEntry 1 }
|
|
|
|
--xxx.100.7.2.1.2
|
|
secMacAdress OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Mac adress bind on this port"
|
|
::= { securityMacPortEntry 2 }
|
|
|
|
--xxx.100.7.2.1.3
|
|
secVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "vlan id of this port(pvid)"
|
|
::= { securityMacPortEntry 3 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
-- (xxx.100.8) priIgmpSnoopingMib
|
|
|
|
--xxx.100.8.1
|
|
priIgmpSnoopingGlobalEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Enable or disable the IgmpSnooping algorithm in the switch."
|
|
::= { priIgmpSnoopingMib 1 }
|
|
|
|
--xxx.100.8.2
|
|
priIgmpSnoopingVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PriIgmpSnoopingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" IopgmpSnoing configuration in vlan."
|
|
::= { priIgmpSnoopingMib 2 }
|
|
|
|
--xxx.100.8.2.1
|
|
priIgmpSnoopingEntry OBJECT-TYPE
|
|
SYNTAX PriIgmpSnoopingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" IgmpSnooping confition in vlan."
|
|
INDEX { priIgmpSnoopingvlanID }
|
|
::= { priIgmpSnoopingVlanTable 1 }
|
|
|
|
PriIgmpSnoopingEntry
|
|
::= SEQUENCE
|
|
{
|
|
priIgmpSnoopingvlanID INTEGER,
|
|
priIgmpSnoopingvlanEnable INTEGER,
|
|
priIgmpSnoopingleave INTEGER,
|
|
priIgmpSnoopingL2gen INTEGER,
|
|
priIgmpSnoopingGroupNum INTEGER,
|
|
priIgmpSnoopingSourceNum INTEGER,
|
|
priIgmpSnoopingPort DisplayString,
|
|
priIgmpSnoopingPortTime INTEGER,
|
|
priIgmpSnoopingQueryInterval INTEGER,
|
|
priIgmpSnoopingQueryMrsp INTEGER,
|
|
priIgmpSnoopingQueryRobustness INTEGER,
|
|
priIgmpSnoopingSuppression INTEGER
|
|
}
|
|
|
|
--xxx.100.8.2.1.1
|
|
priIgmpSnoopingvlanID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This value is vlan's ID."
|
|
::= { priIgmpSnoopingEntry 1 }
|
|
|
|
--xxx.100.8.2.1.2
|
|
priIgmpSnoopingvlanEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Enable or disable the IgmpSnooping in the switch.Default:0"
|
|
::= { priIgmpSnoopingEntry 2 }
|
|
|
|
--xxx.100.8.2.1.3
|
|
priIgmpSnoopingleave OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no-immediate-leave(0),
|
|
immediate-leave(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Enable or disable the immediate leave config.Default:0"
|
|
::= { priIgmpSnoopingEntry 3 }
|
|
|
|
--xxx.100.8.2.1.4
|
|
priIgmpSnoopingL2gen OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no-l2-general-querier(0),
|
|
l2-general-querier(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Enable or disable the l2-general-querier config.Default:0"
|
|
::= { priIgmpSnoopingEntry 4 }
|
|
|
|
--xxx.100.8.2.1.5
|
|
priIgmpSnoopingGroupNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "set the maximum IGMP group the port can join"
|
|
::= { priIgmpSnoopingEntry 5 }
|
|
|
|
--xxx.100.8.2.1.6
|
|
priIgmpSnoopingSourceNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "set the maximum source number"
|
|
::= { priIgmpSnoopingEntry 6 }
|
|
|
|
--xxx.100.8.2.1.7
|
|
priIgmpSnoopingPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION " Get static mrouter port of vlan.
|
|
ethernet: Name of Ethernet port
|
|
ifname: Name of interface
|
|
port-channel: Port aggregation."
|
|
::= { priIgmpSnoopingEntry 7 }
|
|
|
|
--xxx.100.8.2.1.8
|
|
priIgmpSnoopingPortTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Configure this survive time of mrouter port.Default: 255s"
|
|
::= { priIgmpSnoopingEntry 8 }
|
|
|
|
--xxx.100.8.2.1.9
|
|
priIgmpSnoopingQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Configure this query interval. Default: 125s"
|
|
::= { priIgmpSnoopingEntry 9 }
|
|
|
|
--xxx.100.8.2.1.10
|
|
priIgmpSnoopingQueryMrsp OBJECT-TYPE
|
|
SYNTAX INTEGER(1..25)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Configure the maximum query response period. Default: 10s"
|
|
::= { priIgmpSnoopingEntry 10 }
|
|
|
|
--xxx.100.8.2.1.11
|
|
priIgmpSnoopingQueryRobustness OBJECT-TYPE
|
|
SYNTAX INTEGER(2..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Configure the query robustness.Default: 2"
|
|
::= { priIgmpSnoopingEntry 11 }
|
|
|
|
--xxx.100.8.2.1.12
|
|
priIgmpSnoopingSuppression OBJECT-TYPE
|
|
SYNTAX INTEGER(1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Configure the suppression query time.Default: 255s"
|
|
::= { priIgmpSnoopingEntry 12 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
-- (xxx.100.9) QinQ group
|
|
|
|
--xxx.100.9.1
|
|
dot1qTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot1qTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port of qinq tunnel function list"
|
|
::= { priQinQmib 1}
|
|
|
|
--xxx.100.9.1
|
|
dot1qTunnelEntry OBJECT-TYPE
|
|
SYNTAX Dot1qTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" configure of dot1qTunnel"
|
|
INDEX { qinqPortIndex }
|
|
::= { dot1qTunnelTable 1 }
|
|
|
|
Dot1qTunnelEntry
|
|
::= SEQUENCE
|
|
{
|
|
qinqPortIndex INTEGER,
|
|
tunnelPortEnable INTEGER,
|
|
tunnelPortType INTEGER
|
|
}
|
|
|
|
--xxx.100.9.1.1
|
|
qinqPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port index"
|
|
::= { dot1qTunnelEntry 1 }
|
|
|
|
--xxx.100.9.1.2
|
|
tunnelPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the dot1q-tunnel in this port."
|
|
::= { dot1qTunnelEntry 2 }
|
|
|
|
--xxx.100.9.1.3
|
|
tunnelPortType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protocol type of trunk port(TPID)(exp:8100/9100/9200)."
|
|
::= { dot1qTunnelEntry 3 }
|
|
|
|
|
|
|
|
--xxx.100.9.2
|
|
vlanTranslationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanTranslationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" VLAN translation basic config."
|
|
::= { priQinQmib 2}
|
|
|
|
--xxx.100.9.2.1
|
|
vlanTranslationEntry OBJECT-TYPE
|
|
SYNTAX VlanTranslationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN translation"
|
|
INDEX { translatPortIndex }
|
|
::= { vlanTranslationTable 1 }
|
|
|
|
VlanTranslationEntry
|
|
::= SEQUENCE
|
|
{
|
|
translatPortIndex INTEGER,
|
|
translationEnable INTEGER,
|
|
translationDropType INTEGER
|
|
}
|
|
|
|
--xxx.100.9.2.1.1
|
|
translatPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of Port."
|
|
::= { vlanTranslationEntry 1 }
|
|
|
|
--xxx.100.9.2.1.2
|
|
translationEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"if the port can be done translation function"
|
|
::= { vlanTranslationEntry 2 }
|
|
|
|
--xxx.100.9.2.1.3
|
|
translationDropType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
in(1),
|
|
out(2),
|
|
both(3),
|
|
noIn(4),
|
|
noOut(5),
|
|
noBoth(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"when VLAN-translation missed, drop packet mode"
|
|
::= { vlanTranslationEntry 3 }
|
|
|
|
|
|
--xxx.100.9.3
|
|
vlanTranslationTypeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VlanTranslationTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port VLAN-translation of translation relation list"
|
|
::= { priQinQmib 3}
|
|
|
|
--xxx.100.9.3.1
|
|
vlanTranslationTypeEntry OBJECT-TYPE
|
|
SYNTAX VlanTranslationTypeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port VLAN translation of translation relation,index is port index and translation sort"
|
|
INDEX { translatPortTypeIndex , translationType ,translationOldVlanid ,translationNewVlanid}
|
|
::= { vlanTranslationTypeTable 1 }
|
|
|
|
VlanTranslationTypeEntry
|
|
::= SEQUENCE
|
|
{
|
|
translatPortTypeIndex INTEGER,
|
|
translationType INTEGER,
|
|
translationOldVlanid INTEGER,
|
|
translationNewVlanid INTEGER,
|
|
translationTypeStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.9.3.1.1
|
|
translatPortTypeIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port index"
|
|
::= { vlanTranslationTypeEntry 1 }
|
|
|
|
|
|
--xxx.100.9.3.1.2
|
|
translationType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
in(1),
|
|
out(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"translation type. in:input translation; out:output translation."
|
|
::= { vlanTranslationTypeEntry 2 }
|
|
|
|
--xxx.100.9.3.1.3
|
|
translationOldVlanid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"vlantranslation pre-vid"
|
|
::= { vlanTranslationTypeEntry 3 }
|
|
|
|
--xxx.100.9.3.1.4
|
|
translationNewVlanid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the new vid"
|
|
::= { vlanTranslationTypeEntry 4 }
|
|
|
|
--xxx.100.9.3.1.5
|
|
translationTypeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" accession/delete VLAN-translation relation"
|
|
::= { vlanTranslationTypeEntry 5 }
|
|
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
-- (xxx.100.10) prisecurity group
|
|
|
|
--xxx.100.10.1
|
|
acl OBJECT IDENTIFIER ::= { prisecurity 1 }
|
|
--xxx.100.10.1.1
|
|
fireWall OBJECT IDENTIFIER ::= { acl 1 }
|
|
--xxx.100.10.1.2
|
|
timeRange OBJECT IDENTIFIER ::= { acl 2 }
|
|
--xxx.100.10.1.3
|
|
numAcl OBJECT IDENTIFIER ::= { acl 3 }
|
|
--xxx.100.10.1.4
|
|
nameAcl OBJECT IDENTIFIER ::= { acl 4 }
|
|
|
|
|
|
|
|
--xxx.100.10.1.1.1
|
|
fireWallEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"firewall on-off"
|
|
::= { fireWall 1 }
|
|
|
|
--xxx.100.10.1.1.2
|
|
--fireWallOperation OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- permit(0),
|
|
-- denyipv4(1),
|
|
-- denyipv6(2),
|
|
-- denyip(3),
|
|
-- deny(8)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "fireWall of default rule"
|
|
-- ::= { fireWall 2 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.1.2.1
|
|
timeRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TimeRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"timeRange Table"
|
|
::= { timeRange 1 }
|
|
|
|
--xxx.100.10.1.2.1.1
|
|
timeRangeEntry OBJECT-TYPE
|
|
SYNTAX TimeRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"timeRange Entry"
|
|
INDEX { timeRangeName }
|
|
::= { timeRangeTable 1 }
|
|
|
|
TimeRangeEntry
|
|
::= SEQUENCE
|
|
{
|
|
timeRangeName DisplayString,
|
|
timeRangeType INTEGER,
|
|
timeRangeStWeek INTEGER,
|
|
timeRangeStTime DisplayString,
|
|
timeRangeStDate DisplayString,
|
|
timeRangeEndWeek INTEGER,
|
|
timeRangeEndTime DisplayString,
|
|
timeRangeEndDate DisplayString,
|
|
timeRangeStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.10.1.2.1.1.1
|
|
timeRangeName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TimeRange name"
|
|
::= { timeRangeEntry 1 }
|
|
|
|
--xxx.100.10.1.2.1.1.2
|
|
timeRangeType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
absolute(0),
|
|
absolutePeriodic(1),
|
|
periodic(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TimeRange type"
|
|
::= { timeRangeEntry 2 }
|
|
|
|
--xxx.100.10.1.2.1.1.3
|
|
timeRangeStWeek OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
monday(1),
|
|
tuesday(2),
|
|
wednesday(4),
|
|
thursday(8),
|
|
friday(16),
|
|
saturday(32),
|
|
sunday(64)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configurate the start week"
|
|
::= { timeRangeEntry 3 }
|
|
|
|
--xxx.100.10.1.2.1.1.4
|
|
timeRangeStTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configurate the start clock"
|
|
::= { timeRangeEntry 4 }
|
|
|
|
--xxx.100.10.1.2.1.1.5
|
|
timeRangeStDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configurate the start Date"
|
|
::= { timeRangeEntry 5 }
|
|
|
|
--xxx.100.10.1.2.1.1.6
|
|
timeRangeEndWeek OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
monday(1),
|
|
tuesday(2),
|
|
wednesday(4),
|
|
thursday(8),
|
|
friday(16),
|
|
saturday(32),
|
|
sunday(64)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configurate the end week"
|
|
::= { timeRangeEntry 6 }
|
|
|
|
--xxx.100.10.1.2.1.1.7
|
|
timeRangeEndTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configurate the end clock"
|
|
::= { timeRangeEntry 7 }
|
|
|
|
--xxx.100.10.1.2.1.1.8
|
|
timeRangeEndDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configurate the end date"
|
|
::= { timeRangeEntry 8 }
|
|
|
|
--xxx.100.10.1.2.1.1.9
|
|
timeRangeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TimeRange configurate status machine"
|
|
::= { timeRangeEntry 9 }
|
|
|
|
--xxx.100.10.1.2.2
|
|
timeRangeShowTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TimeRangeShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TimeRange show Table"
|
|
::= { timeRange 2 }
|
|
|
|
--xxx.100.10.1.2.2.1
|
|
timeRangeShowEntry OBJECT-TYPE
|
|
SYNTAX TimeRangeShowEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TimeRange show Entry"
|
|
INDEX { timeRangeShowName , timeRangeElemNum }
|
|
::= { timeRangeShowTable 1 }
|
|
|
|
TimeRangeShowEntry
|
|
::= SEQUENCE
|
|
{
|
|
timeRangeShowName DisplayString,
|
|
timeRangeElemNum INTEGER,
|
|
timeRangeShow DisplayString
|
|
}
|
|
|
|
--xxx.100.10.1.2.2.1.1
|
|
timeRangeShowName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TimeRange name"
|
|
::= { timeRangeShowEntry 1 }
|
|
|
|
--xxx.100.10.1.2.2.1.2
|
|
timeRangeElemNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TimeRange group index"
|
|
::= { timeRangeShowEntry 2 }
|
|
|
|
--xxx.100.10.1.2.2.1.3
|
|
timeRangeShow OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TimeRange configure status"
|
|
::= { timeRangeShowEntry 3 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.1.3.2
|
|
numIpStandardAcl OBJECT IDENTIFIER ::= { numAcl 2 }
|
|
|
|
--xxx.100.10.1.3.2.1.1
|
|
numIpStandardNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..99)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of number-ip-standard-acl group Interface."
|
|
::= { numIpStandardAcl 1 }
|
|
|
|
--xxx.100.10.1.3.2.1.2
|
|
numIpStandardAct OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The action of acl rule."
|
|
::= { numIpStandardAcl 2 }
|
|
|
|
--xxx.100.10.1.3.2.1.3
|
|
numIpStandardSrcIpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source Ip address used by this ACE."
|
|
::= { numIpStandardAcl 3 }
|
|
|
|
--xxx.100.10.1.3.2.1.4
|
|
numIpStandardSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address of basic acl rule."
|
|
::= { numIpStandardAcl 4 }
|
|
|
|
--xxx.100.10.1.3.2.1.5
|
|
numIpStandardSrcIpWild OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address wild of basic acl rule."
|
|
::= { numIpStandardAcl 5 }
|
|
|
|
--xxx.100.10.1.3.2.1.6
|
|
numIpStandardStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" now state of the access-list."
|
|
::= { numIpStandardAcl 6 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.1.3.3
|
|
numMacStandardAcl OBJECT IDENTIFIER ::= { numAcl 3 }
|
|
|
|
|
|
--xxx.100.10.1.3.3.1
|
|
numMacStandardNum OBJECT-TYPE
|
|
SYNTAX INTEGER (700..799)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of number-ip-standard-acl group Interface."
|
|
::= { numMacStandardAcl 1 }
|
|
|
|
--xxx.100.10.1.3.4.2
|
|
numMacStandardAct OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The action of acl rule."
|
|
::= { numMacStandardAcl 2 }
|
|
|
|
--xxx.100.10.1.3.4.3
|
|
numMacStandardSrcMacType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source Mac address used by this ACE."
|
|
::= { numMacStandardAcl 3 }
|
|
|
|
--xxx.100.10.1.3.3.4
|
|
numMacStandardSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source Mac-address of basic acl rule."
|
|
::= { numMacStandardAcl 4 }
|
|
|
|
--xxx.100.10.1.3.3.5
|
|
numMacStandardSrcMacWild OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source Mac-address wild of basic acl rule."
|
|
::= { numMacStandardAcl 5 }
|
|
|
|
--xxx.100.10.1.3.3.6
|
|
numMacStandardStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" now state of the access-list."
|
|
::= { numMacStandardAcl 6 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.1.3.4
|
|
numIpExternAcl OBJECT IDENTIFIER ::= { numAcl 4 }
|
|
|
|
--xxx.100.10.1.3.4.1
|
|
numIpExternNum OBJECT-TYPE
|
|
SYNTAX INTEGER (100..199)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of number-ip-Extern-acl group Interface."
|
|
::= { numIpExternAcl 1 }
|
|
|
|
--xxx.100.10.1.3.4.3
|
|
numIpExternAct OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The action of acl rule."
|
|
::= { numIpExternAcl 3 }
|
|
|
|
--xxx.100.10.1.3.4.4
|
|
numIpExternSrcIpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source IP address used by this ACE entry."
|
|
::= { numIpExternAcl 4 }
|
|
|
|
--xxx.100.10.1.3.4.5
|
|
numIpExternSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address of basic acl rule."
|
|
::= { numIpExternAcl 5 }
|
|
|
|
--xxx.100.10.1.3.4.6
|
|
numIpExternSrcIpWild OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address wild of basic acl rule."
|
|
::= { numIpExternAcl 6 }
|
|
|
|
--xxx.100.10.1.3.4.7
|
|
numIpExternDestIpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Destination IP address used by this ACE entry."
|
|
::= { numIpExternAcl 7 }
|
|
|
|
--xxx.100.10.1.3.4.8
|
|
numIpExternDestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination IP-address of basic acl rule."
|
|
::= { numIpExternAcl 8 }
|
|
|
|
--xxx.100.10.1.3.4.9
|
|
numIpExternDestIpWild OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination IP-address wild of basic acl rule."
|
|
::= { numIpExternAcl 9 }
|
|
|
|
--xxx.100.10.1.3.4.10
|
|
numIpExternPre OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the IP precedence value to be matched against.
|
|
This object could not be configured when the status of the
|
|
entry, caqIpAceStatus, is active(1).
|
|
|
|
The value of this object is ignored whenever the value of
|
|
caqIpAceTosMatchCritial object is not matchIpPrec(3)."
|
|
::= { numIpExternAcl 10 }
|
|
|
|
--xxx.100.10.1.3.4.11
|
|
numIpExternTos OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of IP-packet's TOS. <0-15>
|
|
Value of TOS(type of service) max-reliability
|
|
Match packets with max reliable TOS(2) max-throughput
|
|
Match packets with max throughput TOS(4) min-delay
|
|
Match packets with min delay TOS(8) min-monetary-cost
|
|
Match packets with min monetary cost TOS(1) normal
|
|
Match packets with normal TOS(0)"
|
|
::= { numIpExternAcl 11 }
|
|
|
|
--xxx.100.10.1.3.4.12
|
|
numIpExternTimeRange OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Time-range of advanced acl rule."
|
|
::= { numIpExternAcl 12 }
|
|
|
|
--xxx.100.10.1.3.4.13
|
|
numIpExternProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol number field in the IP header used to indicate
|
|
the higher layer protocol as specified in RFC 1700. A value
|
|
value of 0 matches every IP packet.
|
|
|
|
For example :
|
|
0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation,
|
|
6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH,
|
|
88 is EIGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP,
|
|
103 is PIMv2, 108 is PCP."
|
|
::= { numIpExternAcl 13 }
|
|
|
|
--xxx.100.10.1.3.4.14
|
|
numIpExternSrcOP OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
noOperator(0),
|
|
lt(1),
|
|
gt(2),
|
|
eq(3),
|
|
neq(4),
|
|
range(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates how a packet's source TCP/UDP port number is
|
|
to be compared.
|
|
|
|
If the numIpExternProtocol object in the same row does not
|
|
indicate TCP or UDP, this object has to be 'noOperator(0)' and
|
|
cannot be changed while this row is active, i.e., the value of
|
|
numIpExternStatus in the same row has the value 'active(1)'.
|
|
|
|
'noOperator(0)', which is the default value, means that no
|
|
comparison is to be made with the source TCP/UDP port number.
|
|
|
|
lt(1) means less than, gt(2) means greater than, eq(3)
|
|
means equal, neq(4) means not equal. Those 4 operators
|
|
are using the numIpExternSrcPort object as an operand which
|
|
is the only one needed.
|
|
|
|
range(5) means that it compares the port value between two
|
|
numbers, so this operator needs 2 operands. One operand is
|
|
the starting port number of the range which is numIpExternSrcPort
|
|
object, and the other operand is the ending port number of the
|
|
range which the numIpExternSrcPortRange object is in.
|
|
|
|
Now support(3)eq,(5)range."
|
|
::= { numIpExternAcl 14 }
|
|
|
|
--xxx.100.10.1.3.4.15
|
|
numIpExternSrcPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
numIpExternSrcOP object in the same row is range(5), this
|
|
object will be the starting port number of the port range.
|
|
This object cannot be configured if numIpExternStatus in the
|
|
same row is active(1) or numIpExternSrcOP in the same row
|
|
is noOperator(0)."
|
|
::= { numIpExternAcl 15 }
|
|
|
|
--xxx.100.10.1.3.4.16
|
|
numIpExternSrcPortRange OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
numIpExternSrcOP object in the same row is range(5), this
|
|
object will be the ending port number of the port range.
|
|
This object cannot be configured if numIpExternStatus in the
|
|
same row is active(1) or numIpExternSrcOP in the same row
|
|
is not range(5)."
|
|
::= { numIpExternAcl 16 }
|
|
|
|
--xxx.100.10.1.3.4.17
|
|
numIpExternDestOP OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
noOperator(0),
|
|
lt(1),
|
|
gt(2),
|
|
eq(3),
|
|
neq(4),
|
|
range(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates how a packet's Destination TCP/UDP port number is
|
|
to be compared.
|
|
|
|
If the numIpExternProtocol object in the same row does not
|
|
indicate TCP or UDP, this object has to be 'noOperator(0)' and
|
|
cannot be changed while this row is active, i.e., the value of
|
|
numIpExternStatus in the same row has the value 'active(1)'.
|
|
|
|
'noOperator(0)', which is the default value, means that no
|
|
comparison is to be made with the source TCP/UDP port number.
|
|
|
|
lt(1) means less than, gt(2) means greater than, eq(3)
|
|
means equal, neq(4) means not equal. Those 4 operators
|
|
are using the numIpExternDestPort object as an operand which
|
|
is the only one needed.
|
|
|
|
range(5) means that it compares the port value between two
|
|
numbers, so this operator needs 2 operands. One operand is
|
|
the starting port number of the range which is numIpExternSrcPort
|
|
object, and the other operand is the ending port number of the
|
|
range which the numIpExternDestPortRange object is in.
|
|
|
|
Now support(3)eq,(5)range."
|
|
::= { numIpExternAcl 17 }
|
|
|
|
--xxx.100.10.1.3.4.18
|
|
numIpExternDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
numIpExternDestOP object in the same row is range(5), this
|
|
object will be the starting port number of the port range.
|
|
This object cannot be configured if numIpExternStatus in the
|
|
same row is active(1) or numIpExternDestOP in the same row
|
|
is noOperator(0)."
|
|
::= { numIpExternAcl 18 }
|
|
|
|
--xxx.100.10.1.3.4.19
|
|
numIpExternDestPortRange OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
numIpExternDestOP object in the same row is range(5), this
|
|
object will be the ending port number of the port range.
|
|
This object cannot be configured if numIpExternStatus in the
|
|
same row is active(1) or numIpExternDestOP in the same row
|
|
is not range(5)."
|
|
::= { numIpExternAcl 19 }
|
|
|
|
--xxx.100.10.1.3.4.20
|
|
numIpExternIcmpType OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message type of ICMP packets. The type is
|
|
a number from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { numIpExternAcl 20 }
|
|
|
|
--xxx.100.10.1.3.4.21
|
|
numIpExternIcmpCode OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message code of ICMP packets. The code is
|
|
a number from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { numIpExternAcl 21 }
|
|
|
|
--xxx.100.10.1.3.4.22
|
|
numIpExternIgmpType OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message type of IGMP packets. The code is
|
|
a number from 0 to 15."
|
|
DEFVAL { 0 }
|
|
::= { numIpExternAcl 22 }
|
|
|
|
--xxx.100.10.1.3.4.23
|
|
numIpExternTcpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mo(0),
|
|
fin(1),
|
|
syn(2),
|
|
rst(4),
|
|
psh(8),
|
|
ack(16),
|
|
urg(32)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Tcp type."
|
|
::= { numIpExternAcl 23 }
|
|
|
|
--xxx.100.10.1.3.4.24
|
|
numIpExternStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" now state of the access-list."
|
|
::= { numIpExternAcl 24 }
|
|
|
|
--********************************************************************************************************
|
|
--xxx.100.10.1.3.5
|
|
numMacExternAcl OBJECT IDENTIFIER ::= { numAcl 5 }
|
|
|
|
--xxx.100.10.1.3.5.1
|
|
numMacExternNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1100..1199)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of number-Mac-Extern-acl group Interface."
|
|
::= { numMacExternAcl 1 }
|
|
|
|
--xxx.100.10.1.3.5.2
|
|
-- numMacExternSubitemNum OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " The number of number-Mac-Extern-acl group's node."
|
|
-- ::= { numMacExternAcl 2 }
|
|
|
|
--xxx.100.10.1.3.5.3
|
|
numMacExternAct OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The action of acl rule."
|
|
::= { numMacExternAcl 3 }
|
|
|
|
--xxx.100.10.1.3.5.4
|
|
numMacExternSrcMacType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source Mac address used by this ACE entry."
|
|
::= { numMacExternAcl 4 }
|
|
|
|
--xxx.100.10.1.3.5.5
|
|
numMacExternSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source Mac-address of basic acl rule."
|
|
::= { numMacExternAcl 5 }
|
|
|
|
--xxx.100.10.1.3.5.6
|
|
numMacExternSrcMacWild OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source Mac-address wild of basic acl rule."
|
|
::= { numMacExternAcl 6 }
|
|
|
|
--xxx.100.10.1.3.5.7
|
|
numMacExternDestMacType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Destination Mac address used by this ACE entry."
|
|
::= { numMacExternAcl 7 }
|
|
|
|
--xxx.100.10.1.3.5.8
|
|
numMacExternDestMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination Mac-address of basic acl rule."
|
|
::= { numMacExternAcl 8 }
|
|
|
|
--xxx.100.10.1.3.5.9
|
|
numMacExternDestMacWild OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination Mac-address wild of basic acl rule."
|
|
::= { numMacExternAcl 9 }
|
|
|
|
--xxx.100.10.1.3.5.10
|
|
numMacExternPacketType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message type of packets.none(0),untagged-eth2(1),
|
|
untagged-802.3(2),tagged-eth2(3),tagged-802.3(4)"
|
|
::= { numMacExternAcl 10 }
|
|
|
|
--xxx.100.10.1.3.5.11
|
|
numMacExternStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" now state of the access-list."
|
|
::= { numMacExternAcl 11 }
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.1.3.6
|
|
numMacIpExternAcl OBJECT IDENTIFIER ::= { numAcl 6 }
|
|
|
|
--xxx.100.10.1.3.6.1
|
|
numMacIpExternNum OBJECT-TYPE
|
|
SYNTAX INTEGER (3100..3199)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of number-ip-Extern-acl group Interface."
|
|
::= { numMacIpExternAcl 1 }
|
|
|
|
--xxx.100.10.1.3.6.2
|
|
-- numMacIpExternSubitemNum OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " The number of number-ip-Extern-acl group's node."
|
|
-- ::= { numMacIpExternAcl 2 }
|
|
|
|
--xxx.100.10.1.3.6.3
|
|
numMacIpExternAct OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The action of acl rule."
|
|
::= { numMacIpExternAcl 3 }
|
|
|
|
--xxx.100.10.1.3.6.4
|
|
numMacIpExternSrcMacType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source Mac address used by this ACE entry."
|
|
::= { numMacIpExternAcl 4 }
|
|
|
|
--xxx.100.10.1.3.6.5
|
|
numMacIpExternSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source Mac-address of basic acl rule."
|
|
::= { numMacIpExternAcl 5 }
|
|
|
|
--xxx.100.10.1.3.6.6
|
|
numMacIpExternSrcMacWild OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source Mac-address wild of basic acl rule."
|
|
::= { numMacIpExternAcl 6 }
|
|
|
|
--xxx.100.10.1.3.6.7
|
|
numMacIpExternDestMacType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Destination Mac address used by this ACE entry."
|
|
::= { numMacIpExternAcl 7 }
|
|
|
|
--xxx.100.10.1.3.6.8
|
|
numMacIpExternDestMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination Mac-address of basic acl rule."
|
|
::= { numMacIpExternAcl 8 }
|
|
|
|
--xxx.100.10.1.3.6.9
|
|
numMacIpExternDestMacWild OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination Mac-address wild of basic acl rule."
|
|
::= { numMacIpExternAcl 9 }
|
|
|
|
--xxx.100.10.1.3.6.10
|
|
numMacIpExternSrcIpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source IP address used by this ACE entry."
|
|
::= { numMacIpExternAcl 10 }
|
|
|
|
--xxx.100.10.1.3.6.11
|
|
numMacIpExternSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address of basic acl rule."
|
|
::= { numMacIpExternAcl 11 }
|
|
|
|
--xxx.100.10.1.3.6.12
|
|
numMacIpExternSrcIpWild OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address wild of basic acl rule."
|
|
::= { numMacIpExternAcl 12 }
|
|
|
|
--xxx.100.10.1.3.6.13
|
|
numMacIpExternDestIpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Destination IP address used by this ACE entry."
|
|
::= { numMacIpExternAcl 13 }
|
|
|
|
--xxx.100.10.1.3.6.14
|
|
numMacIpExternDestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination IP-address of basic acl rule."
|
|
::= { numMacIpExternAcl 14 }
|
|
|
|
--xxx.100.10.1.3.6.15
|
|
numMacIpExternDestIpWild OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination IP-address wild of basic acl rule."
|
|
::= { numMacIpExternAcl 15 }
|
|
|
|
--xxx.100.10.1.3.6.16
|
|
numMacIpExternPre OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the IP precedence value to be matched against.
|
|
This object could not be configured when the status of the
|
|
entry, caqIpAceStatus, is active(1)"
|
|
::= { numMacIpExternAcl 16 }
|
|
|
|
--xxx.100.10.1.3.6.17
|
|
numMacIpExternTos OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of IP-packet's TOS. <0-15>
|
|
Value of TOS(type of service) max-reliability
|
|
Match packets with max reliable TOS(2) max-throughput
|
|
Match packets with max throughput TOS(4) min-delay
|
|
Match packets with min delay TOS(8) min-monetary-cost
|
|
Match packets with min monetary cost TOS(1) normal
|
|
Match packets with normal TOS(0)"
|
|
::= { numMacIpExternAcl 17 }
|
|
|
|
--xxx.100.10.1.3.6.18
|
|
numMacIpExternTimeRange OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Time-range of advanced acl rule."
|
|
::= { numMacIpExternAcl 18 }
|
|
|
|
--xxx.100.10.1.3.6.19
|
|
numMacIpExternProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol number field in the IP header used to indicate
|
|
the higher layer protocol as specified in RFC 1700. A value
|
|
value of 0 matches every IP packet.
|
|
|
|
For example :
|
|
0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation,
|
|
6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH,
|
|
88 is EIGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP,
|
|
103 is PIMv2, 108 is PCP."
|
|
::= { numMacIpExternAcl 19 }
|
|
|
|
--xxx.100.10.1.3.6.20
|
|
numMacIpExternSrcOP OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
noOperator(0),
|
|
lt(1),
|
|
gt(2),
|
|
eq(3),
|
|
neq(4),
|
|
range(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates how a packet's source TCP/UDP port number is
|
|
to be compared.
|
|
|
|
If the numMacIpExternProtocol object in the same row does not
|
|
indicate TCP or UDP, this object has to be 'noOperator(0)' and
|
|
cannot be changed while this row is active, i.e., the value of
|
|
numMacIpExternStatus in the same row has the value 'active(1)'.
|
|
|
|
'noOperator(0)', which is the default value, means that no
|
|
comparison is to be made with the source TCP/UDP port number.
|
|
|
|
lt(1) means less than, gt(2) means greater than, eq(3)
|
|
means equal, neq(4) means not equal. Those 4 operators
|
|
are using the numMacIpExternSrcPort object as an operand which
|
|
is the only one needed.
|
|
|
|
range(5) means that it compares the port value between two
|
|
numbers, so this operator needs 2 operands. One operand is
|
|
the starting port number of the range which is numMacIpExternSrcPort
|
|
object, and the other operand is the ending port number of the
|
|
range which the numMacIpExternSrcPortRange object is in.
|
|
|
|
Now support(3)eq,(5)range."
|
|
::= { numMacIpExternAcl 20 }
|
|
|
|
--xxx.100.10.1.3.6.21
|
|
numMacIpExternSrcPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
numMacIpExternSrcOP object in the same row is range(5), this
|
|
object will be the starting port number of the port range.
|
|
This object cannot be configured if numMacIpExternStatus in the
|
|
same row is active(1) or numMacIpExternSrcOP in the same row
|
|
is noOperator(0)."
|
|
::= { numMacIpExternAcl 21 }
|
|
|
|
--xxx.100.10.1.3.6.22
|
|
numMacIpExternSrcPortRange OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
numMacIpExternSrcOP object in the same row is range(5), this
|
|
object will be the ending port number of the port range.
|
|
This object cannot be configured if numMacIpExternStatus in the
|
|
same row is active(1) or numMacIpExternSrcOP in the same row
|
|
is not range(5)."
|
|
::= { numMacIpExternAcl 22 }
|
|
|
|
--xxx.100.10.1.3.6.23
|
|
numMacIpExternDestOP OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
noOperator(0),
|
|
lt(1),
|
|
gt(2),
|
|
eq(3),
|
|
neq(4),
|
|
range(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates how a packet's Destination TCP/UDP port number is
|
|
to be compared.
|
|
|
|
If the numMacIpExternProtocol object in the same row does not
|
|
indicate TCP or UDP, this object has to be 'noOperator(0)' and
|
|
cannot be changed while this row is active, i.e., the value of
|
|
numMacIpExternStatus in the same row has the value 'active(1)'.
|
|
|
|
'noOperator(0)', which is the default value, means that no
|
|
comparison is to be made with the source TCP/UDP port number.
|
|
|
|
lt(1) means less than, gt(2) means greater than, eq(3)
|
|
means equal, neq(4) means not equal. Those 4 operators
|
|
are using the numMacIpExternDestPort object as an operand which
|
|
is the only one needed.
|
|
|
|
range(5) means that it compares the port value between two
|
|
numbers, so this operator needs 2 operands. One operand is
|
|
the starting port number of the range which is numIpExternSrcPort
|
|
object, and the other operand is the ending port number of the
|
|
range which the numMacIpExternDestPortRange object is in.
|
|
|
|
Now support(3)eq,(5)range."
|
|
::= { numMacIpExternAcl 23 }
|
|
|
|
--xxx.100.10.1.3.6.24
|
|
numMacIpExternDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
numMacIpExternDestOP object in the same row is range(5), this
|
|
object will be the starting port number of the port range.
|
|
This object cannot be configured if numMacIpExternStatus in the
|
|
same row is active(1) or numMacIpExternDestOP in the same row
|
|
is noOperator(0)."
|
|
::= { numMacIpExternAcl 24 }
|
|
|
|
--xxx.100.10.1.3.6.25
|
|
numMacIpExternDestPortRange OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
numMacIpExternDestOP object in the same row is range(5), this
|
|
object will be the ending port number of the port range.
|
|
This object cannot be configured if numMacIpExternStatus in the
|
|
same row is active(1) or numMacIpExternDestOP in the same row
|
|
is not range(5)."
|
|
::= { numMacIpExternAcl 25 }
|
|
|
|
--xxx.100.10.1.3.6.26
|
|
numMacIpExternIcmpType OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message type of ICMP packets. The type is
|
|
a number from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { numMacIpExternAcl 26 }
|
|
|
|
--xxx.100.10.1.3.6.27
|
|
numMacIpExternIcmpCode OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message code of ICMP packets. The code is
|
|
a number from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { numMacIpExternAcl 27 }
|
|
|
|
--xxx.100.10.1.3.6.28
|
|
numMacIpExternIgmpType OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message type of IGMP packets. The code is
|
|
a number from 0 to 15."
|
|
DEFVAL { 0 }
|
|
::= { numMacIpExternAcl 28 }
|
|
|
|
--xxx.100.10.1.3.6.29
|
|
numMacIpExternTcpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mo(0),
|
|
fin(1),
|
|
syn(2),
|
|
rst(4),
|
|
psh(8),
|
|
ack(16),
|
|
urg(32)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Tcp type."
|
|
::= { numMacIpExternAcl 29 }
|
|
|
|
--xxx.100.10.1.3.6.30
|
|
numMacIpExternStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" now state of the access-list."
|
|
::= { numMacIpExternAcl 30 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.1.4.2
|
|
nameIpStandardAcl OBJECT IDENTIFIER ::= { nameAcl 2 }
|
|
|
|
--xxx.100.10.1.4.2.1
|
|
nameIpStandardName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of name-ip-standard-acl group Interface."
|
|
::= { nameIpStandardAcl 1 }
|
|
|
|
--xxx.100.10.1.4.2.2
|
|
nameIpStandardAct OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The action of acl rule."
|
|
::= { nameIpStandardAcl 2 }
|
|
|
|
--xxx.100.10.1.4.2.3
|
|
nameIpStandardSrcIpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source IP address used by this ACE entry."
|
|
::= { nameIpStandardAcl 3 }
|
|
|
|
--xxx.100.10.1.4.2.4
|
|
nameIpStandardSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address of basic acl rule."
|
|
::= { nameIpStandardAcl 4 }
|
|
|
|
--xxx.100.10.1.4.2.5
|
|
nameIpStandardSrcIpWild OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address wild of basic acl rule."
|
|
::= { nameIpStandardAcl 5 }
|
|
|
|
--xxx.100.10.1.4.2.6
|
|
nameIpStandardStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" now state of the access-list."
|
|
::= { nameIpStandardAcl 6 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.1.4.3
|
|
nameIpExternAcl OBJECT IDENTIFIER ::= { nameAcl 3 }
|
|
|
|
--xxx.100.10.1.4.3.1
|
|
nameIpExternName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of name-ip-Extern-acl group Interface."
|
|
::= { nameIpExternAcl 1 }
|
|
|
|
--xxx.100.10.1.4.3.2
|
|
-- nameIpExternSubitemNum OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " The number of name-ip-Extern-acl group's node."
|
|
-- ::= { nameIpExternAcl 2 }
|
|
|
|
--xxx.100.10.1.4.3.3
|
|
nameIpExternAct OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The action of acl rule."
|
|
::= { nameIpExternAcl 3 }
|
|
|
|
--xxx.100.10.1.4.3.4
|
|
nameIpExternSrcIpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source IP address used by this ACE entry."
|
|
::= { nameIpExternAcl 4 }
|
|
|
|
--xxx.100.10.1.4.3.5
|
|
nameIpExternSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address of basic acl rule."
|
|
::= { nameIpExternAcl 5 }
|
|
|
|
--xxx.100.10.1.4.3.6
|
|
nameIpExternSrcIpWild OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address wild of basic acl rule."
|
|
::= { nameIpExternAcl 6 }
|
|
|
|
--xxx.100.10.1.4.3.7
|
|
nameIpExternDestIpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Destination IP address used by this ACE entry."
|
|
::= { nameIpExternAcl 7 }
|
|
|
|
--xxx.100.10.1.4.3.8
|
|
nameIpExternDestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination IP-address of basic acl rule."
|
|
::= { nameIpExternAcl 8 }
|
|
|
|
--xxx.100.10.1.4.3.9
|
|
nameIpExternDestIpWild OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination IP-address wild of basic acl rule."
|
|
::= { nameIpExternAcl 9 }
|
|
|
|
--xxx.100.10.1.4.3.10
|
|
nameIpExternPre OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the IP precedence value to be matched against.
|
|
This object could not be configured when the status of the
|
|
entry, caqIpAceStatus, is active(1).
|
|
|
|
The value of this object is ignored whenever the value of
|
|
caqIpAceTosMatchCritial object is not matchIpPrec(3)."
|
|
::= { nameIpExternAcl 10 }
|
|
|
|
--xxx.100.10.1.4.3.11
|
|
nameIpExternTos OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of IP-packet's TOS.
|
|
Value of TOS(type of service) max-reliability
|
|
match packets with max reliable TOS(2), max-throughput
|
|
match packets with max throughput TOS(4), min-delay
|
|
match packets with min delay TOS(8), min-monetary-cost
|
|
match packets with min monetary cost TOS(1), normal
|
|
match packets with normal TOS(0)"
|
|
::= { nameIpExternAcl 11 }
|
|
|
|
--xxx.100.10.1.4.3.12
|
|
nameIpExternTimeRange OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Time-range of advanced acl rule."
|
|
::= { nameIpExternAcl 12 }
|
|
|
|
--xxx.100.10.1.4.3.13
|
|
nameIpExternProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol number field in the IP header used to indicate
|
|
the higher layer protocol as specified in RFC 1700. A value
|
|
value of 0 matches every IP packet.
|
|
|
|
For example :
|
|
0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation,
|
|
6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH,
|
|
88 is EIGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP,
|
|
103 is PIMv2, 108 is PCP."
|
|
::= { nameIpExternAcl 13 }
|
|
|
|
--xxx.100.10.1.4.3.14
|
|
nameIpExternSrcOP OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
noOperator(0),
|
|
lt(1),
|
|
gt(2),
|
|
eq(3),
|
|
neq(4),
|
|
range(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates how a packet's source TCP/UDP port number is
|
|
to be compared.
|
|
|
|
If the numIpExternProtocol object in the same row does not
|
|
indicate TCP or UDP, this object has to be 'noOperator(0)' and
|
|
cannot be changed while this row is active, i.e., the value of
|
|
numIpExternStatus in the same row has the value 'active(1)'.
|
|
|
|
'noOperator(0)', which is the default value, means that no
|
|
comparison is to be made with the source TCP/UDP port number.
|
|
|
|
lt(1) means less than, gt(2) means greater than, eq(3)
|
|
means equal, neq(4) means not equal. Those 4 operators
|
|
are using the numIpExternSrcPort object as an operand which
|
|
is the only one needed.
|
|
|
|
range(5) means that it compares the port value between two
|
|
numbers, so this operator needs 2 operands. One operand is
|
|
the starting port number of the range which is nameIpExternSrcPort
|
|
object, and the other operand is the ending port number of the
|
|
range which the nameIpExternSrcPortRange object is in.
|
|
|
|
Now support(3)eq,(5)range."
|
|
::= { nameIpExternAcl 14 }
|
|
|
|
--xxx.100.10.1.4.3.15
|
|
nameIpExternSrcPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
nameIpExternSrcOP object in the same row is range(5), this
|
|
object will be the starting port number of the port range.
|
|
This object cannot be configured if nameIpExternStatus in the
|
|
same row is active(1) or nameIpExternSrcOP in the same row
|
|
is noOperator(0)."
|
|
::= { nameIpExternAcl 15 }
|
|
|
|
--xxx.100.10.1.4.3.16
|
|
nameIpExternSrcPortRange OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
nameIpExternSrcOP object in the same row is range(5), this
|
|
object will be the ending port number of the port range.
|
|
This object cannot be configured if nameIpExternStatus in the
|
|
same row is active(1) or nameIpExternSrcOP in the same row
|
|
is not range(5)."
|
|
::= { nameIpExternAcl 16 }
|
|
|
|
--xxx.100.10.1.4.3.17
|
|
nameIpExternDestOP OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
noOperator(0),
|
|
lt(1),
|
|
gt(2),
|
|
eq(3),
|
|
neq(4),
|
|
range(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates how a packet's Destination TCP/UDP port number is
|
|
to be compared.
|
|
|
|
If the nameIpExternProtocol object in the same row does not
|
|
indicate TCP or UDP, this object has to be 'noOperator(0)' and
|
|
cannot be changed while this row is active, i.e., the value of
|
|
nameIpExternStatus in the same row has the value 'active(1)'.
|
|
|
|
'noOperator(0)', which is the default value, means that no
|
|
comparison is to be made with the source TCP/UDP port number.
|
|
|
|
lt(1) means less than, gt(2) means greater than, eq(3)
|
|
means equal, neq(4) means not equal. Those 4 operators
|
|
are using the nameIpExternDestPort object as an operand which
|
|
is the only one needed.
|
|
|
|
range(5) means that it compares the port value between two
|
|
numbers, so this operator needs 2 operands. One operand is
|
|
the starting port number of the range which is nameIpExternSrcPort
|
|
object, and the other operand is the ending port number of the
|
|
range which the nameIpExternDestPortRange object is in.
|
|
|
|
Now support(3)eq,(5)range."
|
|
::= { nameIpExternAcl 17 }
|
|
|
|
--xxx.100.10.1.4.3.18
|
|
nameIpExternDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
nameIpExternDestOP object in the same row is range(5), this
|
|
object will be the starting port number of the port range.
|
|
This object cannot be configured if nameIpExternStatus in the
|
|
same row is active(1) or nameIpExternDestOP in the same row
|
|
is noOperator(0)."
|
|
::= { nameIpExternAcl 18 }
|
|
|
|
--xxx.100.10.1.4.3.19
|
|
nameIpExternDestPortRange OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
nameIpExternDestOP object in the same row is range(5), this
|
|
object will be the ending port number of the port range.
|
|
This object cannot be configured if nameIpExternStatus in the
|
|
same row is active(1) or nameIpExternDestOP in the same row
|
|
is not range(5)."
|
|
::= { nameIpExternAcl 19 }
|
|
|
|
--xxx.100.10.1.4.3.20
|
|
nameIpExternIcmpType OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message type of ICMP packets. The type is
|
|
a number from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { nameIpExternAcl 20 }
|
|
|
|
--xxx.100.10.1.4.3.21
|
|
nameIpExternIcmpCode OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message code of ICMP packets. The code is
|
|
a number from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { nameIpExternAcl 21 }
|
|
|
|
--xxx.100.10.1.4.3.22
|
|
nameIpExternIgmpType OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message type of IGMP packets. The code is
|
|
a number from 0 to 15."
|
|
DEFVAL { 0 }
|
|
::= { nameIpExternAcl 22 }
|
|
|
|
--xxx.100.10.1.4.3.23
|
|
nameIpExternTcpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mo(0),
|
|
fin(1),
|
|
syn(2),
|
|
rst(4),
|
|
psh(8),
|
|
ack(16),
|
|
urg(32)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Tcp type."
|
|
::= { nameIpExternAcl 23 }
|
|
|
|
--xxx.100.10.1.4.3.24
|
|
nameIpExternStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" now state of the access-list."
|
|
::= { nameIpExternAcl 24 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.1.4.4
|
|
nameMacExternAcl OBJECT IDENTIFIER ::= { nameAcl 4 }
|
|
|
|
--xxx.100.10.1.4.4.1
|
|
nameMacExternName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of name-Mac-Extern-acl group Interface."
|
|
::= { nameMacExternAcl 1 }
|
|
|
|
--xxx.100.10.1.4.4.3
|
|
nameMacExternAct OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The action of acl rule."
|
|
::= { nameMacExternAcl 3 }
|
|
|
|
--xxx.100.10.1.4.4.4
|
|
nameMacExternSrcMacType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source Mac address used by this ACE entry."
|
|
::= { nameMacExternAcl 4 }
|
|
|
|
--xxx.100.10.1.4.4.5
|
|
nameMacExternSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source Mac-address of basic acl rule."
|
|
::= { nameMacExternAcl 5 }
|
|
|
|
--xxx.100.10.1.4.4.6
|
|
nameMacExternSrcMacWild OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source Mac-address wild of basic acl rule."
|
|
::= { nameMacExternAcl 6 }
|
|
|
|
--xxx.100.10.1.4.4.7
|
|
nameMacExternDestMacType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Destination Mac address used by this ACE entry."
|
|
::= { nameMacExternAcl 7 }
|
|
|
|
--xxx.100.10.1.4.4.8
|
|
nameMacExternDestMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination Mac-address of basic acl rule."
|
|
::= { nameMacExternAcl 8 }
|
|
|
|
--xxx.100.10.1.4.4.9
|
|
nameMacExternDestMacWild OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination Mac-address wild of basic acl rule."
|
|
::= { nameMacExternAcl 9 }
|
|
|
|
--xxx.100.10.1.4.4.10
|
|
nameMacExternPacketType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message type of packets.none(0),untagged-eth2(1),
|
|
untagged-802.3(2),tagged-eth2(3),tagged-802.3(4)"
|
|
::= { nameMacExternAcl 10 }
|
|
|
|
--xxx.100.10.1.4.4.11
|
|
nameMacExternStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" now state of the access-list."
|
|
::= { nameMacExternAcl 11 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.1.4.5
|
|
nameMacIpExternAcl OBJECT IDENTIFIER ::= { nameAcl 5 }
|
|
|
|
--xxx.100.10.1.4.5.1
|
|
nameMacIpExternName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of name-ip-Extern-acl group Interface."
|
|
::= { nameMacIpExternAcl 1 }
|
|
|
|
--xxx.100.10.1.4.5.2
|
|
-- nameMacIpExternSubitemNum OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- " The number of name-ip-Extern-acl group's node."
|
|
-- ::= { nameMacIpExternAcl 2 }
|
|
|
|
--xxx.100.10.1.4.5.3
|
|
nameMacIpExternAct OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
deny(0),
|
|
permit(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The action of acl rule."
|
|
::= { nameMacIpExternAcl 3 }
|
|
|
|
--xxx.100.10.1.4.5.4
|
|
nameMacIpExternSrcMacType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source Mac address used by this ACE entry."
|
|
::= { nameMacIpExternAcl 4 }
|
|
|
|
--xxx.100.10.1.4.5.5
|
|
nameMacIpExternSrcMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source Mac-address of basic acl rule."
|
|
::= { nameMacIpExternAcl 5 }
|
|
|
|
--xxx.100.10.1.4.5.6
|
|
nameMacIpExternSrcMacWild OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source Mac-address wild of basic acl rule."
|
|
::= { nameMacIpExternAcl 6 }
|
|
|
|
--xxx.100.10.1.4.5.7
|
|
nameMacIpExternDestMacType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Destination Mac address used by this ACE entry."
|
|
::= { nameMacIpExternAcl 7 }
|
|
|
|
--xxx.100.10.1.4.5.8
|
|
nameMacIpExternDestMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination Mac-address of basic acl rule."
|
|
::= { nameMacIpExternAcl 8 }
|
|
|
|
--xxx.100.10.1.4.5.9
|
|
nameMacIpExternDestMacWild OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination Mac-address wild of basic acl rule."
|
|
::= { nameMacIpExternAcl 9 }
|
|
|
|
--xxx.100.10.1.4.5.10
|
|
nameMacIpExternSrcIpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Source IP address used by this ACE entry."
|
|
::= { nameMacIpExternAcl 10 }
|
|
|
|
--xxx.100.10.1.4.5.11
|
|
nameMacIpExternSrcIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address of basic acl rule."
|
|
::= { nameMacIpExternAcl 11 }
|
|
|
|
--xxx.100.10.1.4.5.12
|
|
nameMacIpExternSrcIpWild OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Source IP-address wild of basic acl rule."
|
|
::= { nameMacIpExternAcl 12 }
|
|
|
|
--xxx.100.10.1.4.5.13
|
|
nameMacIpExternDestIpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
specified(0),
|
|
any(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Destination IP address used by this ACE entry."
|
|
::= { nameMacIpExternAcl 13 }
|
|
|
|
--xxx.100.10.1.4.5.14
|
|
nameMacIpExternDestIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination IP-address of basic acl rule."
|
|
::= { nameMacIpExternAcl 14 }
|
|
|
|
--xxx.100.10.1.4.5.15
|
|
nameMacIpExternDestIpWild OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Destination IP-address wild of basic acl rule."
|
|
::= { nameMacIpExternAcl 15 }
|
|
|
|
--xxx.100.10.1.4.5.16
|
|
nameMacIpExternPre OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the IP precedence value to be matched against.
|
|
This object could not be configured when the status of the
|
|
entry, caqIpAceStatus, is active(1)"
|
|
::= { nameMacIpExternAcl 16 }
|
|
|
|
--xxx.100.10.1.4.5.17
|
|
nameMacIpExternTos OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of IP-packet's TOS. <0-15>
|
|
Value of TOS(type of service) max-reliability
|
|
Match packets with max reliable TOS(2) max-throughput
|
|
Match packets with max throughput TOS(4) min-delay
|
|
Match packets with min delay TOS(8) min-monetary-cost
|
|
Match packets with min monetary cost TOS(1) normal
|
|
Match packets with normal TOS(0)"
|
|
::= { nameMacIpExternAcl 17 }
|
|
|
|
--xxx.100.10.1.4.5.18
|
|
nameMacIpExternTimeRange OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE (1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Time-range of advanced acl rule."
|
|
::= { nameMacIpExternAcl 18 }
|
|
|
|
--xxx.100.10.1.4.5.19
|
|
nameMacIpExternProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol number field in the IP header used to indicate
|
|
the higher layer protocol as specified in RFC 1700. A value
|
|
value of 0 matches every IP packet.
|
|
|
|
For example :
|
|
0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation,
|
|
6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH,
|
|
88 is EIGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP,
|
|
103 is PIMv2, 108 is PCP."
|
|
::= { nameMacIpExternAcl 19 }
|
|
|
|
--xxx.100.10.1.4.5.20
|
|
nameMacIpExternSrcOP OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
noOperator(0),
|
|
lt(1),
|
|
gt(2),
|
|
eq(3),
|
|
neq(4),
|
|
range(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates how a packet's source TCP/UDP port number is
|
|
to be compared.
|
|
|
|
If the nameMacIpExternProtocol object in the same row does not
|
|
indicate TCP or UDP, this object has to be 'noOperator(0)' and
|
|
cannot be changed while this row is active, i.e., the value of
|
|
nameMacIpExternStatus in the same row has the value 'active(1)'.
|
|
|
|
'noOperator(0)', which is the default value, means that no
|
|
comparison is to be made with the source TCP/UDP port number.
|
|
|
|
lt(1) means less than, gt(2) means greater than, eq(3)
|
|
means equal, neq(4) means not equal. Those 4 operators
|
|
are using the nameMacIpExternSrcPort object as an operand which
|
|
is the only one needed.
|
|
|
|
range(5) means that it compares the port value between two
|
|
numbers, so this operator needs 2 operands. One operand is
|
|
the starting port number of the range which is nameMacIpExternSrcPort
|
|
object, and the other operand is the ending port number of the
|
|
range which the nameMacIpExternSrcPortRange object is in.
|
|
|
|
Now support(3)eq,(5)range."
|
|
::= { nameMacIpExternAcl 20 }
|
|
|
|
--xxx.100.10.1.4.5.21
|
|
nameMacIpExternSrcPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
nameMacIpExternSrcOP object in the same row is range(5), this
|
|
object will be the starting port number of the port range.
|
|
This object cannot be configured if nameMacIpExternStatus in the
|
|
same row is active(1) or nameMacIpExternSrcOP in the same row
|
|
is noOperator(0)."
|
|
::= { nameMacIpExternAcl 21 }
|
|
|
|
--xxx.100.10.1.4.5.22
|
|
nameMacIpExternSrcPortRange OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
nameMacIpExternSrcOP object in the same row is range(5), this
|
|
object will be the ending port number of the port range.
|
|
This object cannot be configured if nameMacIpExternStatus in the
|
|
same row is active(1) or nameMacIpExternSrcOP in the same row
|
|
is not range(5)."
|
|
::= { nameMacIpExternAcl 22 }
|
|
|
|
--xxx.100.10.1.4.5.23
|
|
nameMacIpExternDestOP OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
noOperator(0),
|
|
lt(1),
|
|
gt(2),
|
|
eq(3),
|
|
neq(4),
|
|
range(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates how a packet's Destination TCP/UDP port number is
|
|
to be compared.
|
|
|
|
If the nameMacIpExternProtocol object in the same row does not
|
|
indicate TCP or UDP, this object has to be 'noOperator(0)' and
|
|
cannot be changed while this row is active, i.e., the value of
|
|
nameMacIpExternStatus in the same row has the value 'active(1)'.
|
|
|
|
'noOperator(0)', which is the default value, means that no
|
|
comparison is to be made with the source TCP/UDP port number.
|
|
|
|
lt(1) means less than, gt(2) means greater than, eq(3)
|
|
means equal, neq(4) means not equal. Those 4 operators
|
|
are using the nameMacIpExternDestPort object as an operand which
|
|
is the only one needed.
|
|
|
|
range(5) means that it compares the port value between two
|
|
numbers, so this operator needs 2 operands. One operand is
|
|
the starting port number of the range which is nameIpExternSrcPort
|
|
object, and the other operand is the ending port number of the
|
|
range which the nameMacIpExternDestPortRange object is in.
|
|
|
|
Now support(3)eq,(5)range."
|
|
::= { nameMacIpExternAcl 23 }
|
|
|
|
--xxx.100.10.1.4.5.24
|
|
nameMacIpExternDestPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
nameMacIpExternDestOP object in the same row is range(5), this
|
|
object will be the starting port number of the port range.
|
|
This object cannot be configured if nameMacIpExternStatus in the
|
|
same row is active(1) or nameMacIpExternDestOP in the same row
|
|
is noOperator(0)."
|
|
::= { nameMacIpExternAcl 24 }
|
|
|
|
--xxx.100.10.1.4.5.25
|
|
nameMacIpExternDestPortRange OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source port number of the TCP or UDP protocol. If the
|
|
nameMacIpExternDestOP object in the same row is range(5), this
|
|
object will be the ending port number of the port range.
|
|
This object cannot be configured if nameMacIpExternStatus in the
|
|
same row is active(1) or nameMacIpExternDestOP in the same row
|
|
is not range(5)."
|
|
::= { nameMacIpExternAcl 25 }
|
|
|
|
--xxx.100.10.1.4.5.26
|
|
nameMacIpExternIcmpType OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message type of ICMP packets. The type is
|
|
a nameber from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { nameMacIpExternAcl 26 }
|
|
|
|
--xxx.100.10.1.4.5.27
|
|
nameMacIpExternIcmpCode OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message code of ICMP packets. The code is
|
|
a number from 0 to 255."
|
|
DEFVAL { 0 }
|
|
::= { nameMacIpExternAcl 27 }
|
|
|
|
--xxx.100.10.1.4.5.28
|
|
nameMacIpExternIgmpType OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the message type of IGMP packets. The code is
|
|
a number from 0 to 15."
|
|
DEFVAL { 0 }
|
|
::= { nameMacIpExternAcl 28 }
|
|
|
|
--xxx.100.10.1.4.5.29
|
|
nameMacIpExternTcpType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
mo(0),
|
|
fin(1),
|
|
syn(2),
|
|
rst(4),
|
|
psh(8),
|
|
ack(16),
|
|
urg(32)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Tcp type."
|
|
::= { nameMacIpExternAcl 29 }
|
|
|
|
--xxx.100.10.1.4.5.30
|
|
nameMacIpExternStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" now state of the access-list."
|
|
::= { nameMacIpExternAcl 30 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.1.2.2
|
|
showAclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ShowAclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACL show list"
|
|
::= { acl 5 }
|
|
|
|
--xxx.100.10.1.51
|
|
showAclEntry OBJECT-TYPE
|
|
SYNTAX ShowAclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACL show"
|
|
INDEX { aclName , aclRuleNum }
|
|
::= { showAclTable 1 }
|
|
|
|
ShowAclEntry
|
|
::= SEQUENCE
|
|
{
|
|
aclName DisplayString,
|
|
aclRuleNum INTEGER,
|
|
aclConfig DisplayString
|
|
}
|
|
|
|
--xxx.100.10.1.5.1.1
|
|
aclName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACL group name"
|
|
::= { showAclEntry 1 }
|
|
|
|
--xxx.100.10.1.5.1.2
|
|
aclRuleNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the index of rule in the special access group"
|
|
::= { showAclEntry 2 }
|
|
|
|
--xxx.100.10.1.5.1.3
|
|
aclConfig OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACL configure status"
|
|
::= { showAclEntry 3 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
--xxx.100.10.2
|
|
sshMgt OBJECT IDENTIFIER ::= { prisecurity 2 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
sshServerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The status of Secure Shell Server, set this value
|
|
to 1 to enable SSH server, set this value to 0 to
|
|
disable the SSH server."
|
|
::= { sshMgt 1 }
|
|
|
|
sshServerVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version of the SSH Server."
|
|
::= { sshMgt 2 }
|
|
|
|
sshTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER(10..600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time interval that the router waits for the SSH
|
|
client to respond. The range is 10-600."
|
|
::= { sshMgt 3 }
|
|
|
|
sshAuthRetries OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The number of attempts after which the interface is reset.
|
|
The range is 1-10."
|
|
::= { sshMgt 4 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
sshUseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SshUseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table for Secure Shell Connection."
|
|
::= { sshMgt 5 }
|
|
|
|
sshUseEntry OBJECT-TYPE
|
|
SYNTAX SshUseEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The conceptual row for sshConnInfoTable."
|
|
INDEX { sshUserIndex }
|
|
::= { sshUseTable 1 }
|
|
|
|
SshUseEntry ::= SEQUENCE
|
|
{
|
|
sshUserIndex INTEGER,
|
|
sshUserName DisplayString,
|
|
sshUserType INTEGER,
|
|
sshUserPassword DisplayString,
|
|
sshUserStatus INTEGER
|
|
}
|
|
|
|
sshUserIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { sshUseEntry 1 }
|
|
|
|
sshUserName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { sshUseEntry 2 }
|
|
|
|
sshUserType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noCryptograph(0),
|
|
cryptograph(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { sshUseEntry 3 }
|
|
|
|
sshUserPassword OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { sshUseEntry 4 }
|
|
|
|
sshUserStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { sshUseEntry 5 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
sshConnInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SshConnInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The table for Secure Shell Connection."
|
|
::= { sshMgt 6 }
|
|
|
|
sshConnInfoEntry OBJECT-TYPE
|
|
SYNTAX SshConnInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The conceptual row for sshConnInfoTable."
|
|
INDEX { sshConnID }
|
|
::= { sshConnInfoTable 1 }
|
|
|
|
SshConnInfoEntry ::= SEQUENCE
|
|
{
|
|
sshConnID INTEGER,
|
|
sshConnVersion INTEGER,
|
|
sshConnStatus INTEGER,
|
|
sshConnUserName DisplayString
|
|
}
|
|
|
|
sshConnID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The connection ID of the Secure Shell Connection."
|
|
::= { sshConnInfoEntry 1 }
|
|
|
|
sshConnVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The SSH version."
|
|
::= { sshConnInfoEntry 2 }
|
|
|
|
sshConnStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
negotiationStart(1),
|
|
authenticationStart(2),
|
|
sessionStart(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The SSH connection State. negotiationStart(1) mean the
|
|
SSH is in its negotiation start state, authenticationStart(2)
|
|
mean the SSH is in authentication start state, sessionStart(3)
|
|
mean the SSH is in session start State."
|
|
::= { sshConnInfoEntry 3 }
|
|
|
|
sshConnUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "User Name."
|
|
::= { sshConnInfoEntry 4 }
|
|
|
|
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
-- Management for Terminal Access Controller Access Control System plus (TACACS+).
|
|
|
|
--xxx.100.10.3
|
|
tacacsMgt OBJECT IDENTIFIER ::= { prisecurity 3 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
tacacsServerHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TacacsServerHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP address of TACACS server."
|
|
::= { tacacsMgt 1 }
|
|
|
|
tacacsServerHostEntry OBJECT-TYPE
|
|
SYNTAX TacacsServerHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { tacacsServerHostIndex }
|
|
::= { tacacsServerHostTable 1 }
|
|
|
|
TacacsServerHostEntry
|
|
::= SEQUENCE
|
|
{
|
|
tacacsServerHostIndex INTEGER,
|
|
tacacsServerHostIP IpAddress,
|
|
tacacsServerHostPort INTEGER,
|
|
tacacsServerHostPrimary INTEGER,
|
|
tacacsServerHostStatus INTEGER,
|
|
tacacsServerHostKey DisplayString,
|
|
tacacsServerHostTimeout INTEGER
|
|
}
|
|
|
|
tacacsServerHostIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "IP address of TACACS server."
|
|
::= { tacacsServerHostEntry 1 }
|
|
|
|
tacacsServerHostIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP address of TACACS server."
|
|
::= { tacacsServerHostEntry 2 }
|
|
|
|
tacacsServerHostPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port of TACACS server."
|
|
::= { tacacsServerHostEntry 3 }
|
|
|
|
tacacsServerHostPrimary OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noPrimary(0),
|
|
primary(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { tacacsServerHostEntry 4 }
|
|
|
|
tacacsServerHostStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { tacacsServerHostEntry 5 }
|
|
|
|
tacacsServerHostKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key for TACACS."
|
|
::= { tacacsServerHostEntry 6 }
|
|
|
|
tacacsServerHostTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time before retransmit of the TACACS server."
|
|
::= { tacacsServerHostEntry 7 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
tacacsServerTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time before retransmit of the TACACS server."
|
|
::= { tacacsMgt 2 }
|
|
|
|
tacacsServerKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key for TACACS."
|
|
::= { tacacsMgt 3 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.4
|
|
am OBJECT IDENTIFIER ::= { prisecurity 4 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
amGlobalEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Global Enable or disable the Access Management."
|
|
::= { am 1 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
amPortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AmPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Access Management information list of port."
|
|
::= { am 2 }
|
|
|
|
amPortInfoEntry OBJECT-TYPE
|
|
SYNTAX AmPortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
INDEX { amPortIndex,amPortIp }
|
|
::= { amPortInfoTable 1 }
|
|
|
|
AmPortInfoEntry
|
|
::= SEQUENCE
|
|
{
|
|
amPortIndex INTEGER,
|
|
amPortEnable INTEGER,
|
|
amPortForwardingType INTEGER,
|
|
amPortIp IpAddress,
|
|
amPortMac MacAddress,
|
|
amPortCount INTEGER,
|
|
amPortStatus INTEGER
|
|
}
|
|
|
|
amPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "port index"
|
|
::= { amPortInfoEntry 1 }
|
|
|
|
amPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable the Access Management on the port."
|
|
::= { amPortInfoEntry 2 }
|
|
|
|
amPortForwardingType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
ip-pool(1),
|
|
mac-ip-pool(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Access Management forwarding type."
|
|
::= { amPortInfoEntry 3 }
|
|
|
|
amPortIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "IP address of Access Management."
|
|
::= { amPortInfoEntry 4 }
|
|
|
|
amPortMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Mac address of Access Management."
|
|
::= { amPortInfoEntry 5 }
|
|
|
|
amPortCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Seriate IP address number."
|
|
::= { amPortInfoEntry 6 }
|
|
|
|
amPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { amPortInfoEntry 7 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.10.5
|
|
radiusMgt OBJECT IDENTIFIER ::= { prisecurity 5 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
aaaEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable Aaa function."
|
|
::= { radiusMgt 1 }
|
|
|
|
aaaAccount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable Aaa Accounting function."
|
|
::= { radiusMgt 2 }
|
|
|
|
aaaAccountUpdate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable Aaa Accounting update function."
|
|
::= { radiusMgt 3 }
|
|
|
|
aaaAccountBindingDHCP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable Aaa Accounting DHCP-Binding function."
|
|
::= { radiusMgt 4 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
radiusAuthenServerHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RadiusAuthenServerHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Configuration items and information list of RADIUS authentication server host."
|
|
::= { radiusMgt 5 }
|
|
|
|
radiusAuthenServerHostEntry OBJECT-TYPE
|
|
SYNTAX RadiusAuthenServerHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { radiusAuthenServerHostIndex }
|
|
::= { radiusAuthenServerHostTable 1 }
|
|
|
|
RadiusAuthenServerHostEntry
|
|
::= SEQUENCE
|
|
{
|
|
radiusAuthenServerHostIndex INTEGER,
|
|
radiusAuthenServerHostIP IpAddress,
|
|
radiusAuthenServerHostPort INTEGER,
|
|
radiusAuthenServerHostPrimary INTEGER,
|
|
radiusAuthenServerHostStatus INTEGER
|
|
}
|
|
|
|
radiusAuthenServerHostIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of RADIUS authentication server."
|
|
::= { radiusAuthenServerHostEntry 1 }
|
|
|
|
radiusAuthenServerHostIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP address of RADIUS authentication server."
|
|
::= { radiusAuthenServerHostEntry 2 }
|
|
|
|
radiusAuthenServerHostPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port of RADIUS authentication server."
|
|
::= { radiusAuthenServerHostEntry 3 }
|
|
|
|
radiusAuthenServerHostPrimary OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noPrimary(0),
|
|
primary(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configuration of primary or not primary "
|
|
::= { radiusAuthenServerHostEntry 4 }
|
|
|
|
radiusAuthenServerHostStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { radiusAuthenServerHostEntry 5 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
radiusAcctServerHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RadiusAcctServerHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Configuration items and information list of RADIUS accounting server host."
|
|
::= { radiusMgt 6 }
|
|
|
|
radiusAcctServerHostEntry OBJECT-TYPE
|
|
SYNTAX RadiusAcctServerHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { radiusAcctServerHostIndex }
|
|
::= { radiusAcctServerHostTable 1 }
|
|
|
|
RadiusAcctServerHostEntry
|
|
::= SEQUENCE
|
|
{
|
|
radiusAcctServerHostIndex INTEGER,
|
|
radiusAcctServerHostIP IpAddress,
|
|
radiusAcctServerHostPort INTEGER,
|
|
radiusAcctServerHostPrimary INTEGER,
|
|
radiusAcctServerHostStatus INTEGER
|
|
}
|
|
|
|
radiusAcctServerHostIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Index of RADIUS accounting server."
|
|
::= { radiusAcctServerHostEntry 1 }
|
|
|
|
radiusAcctServerHostIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "IP address of RADIUS accounting server."
|
|
::= { radiusAcctServerHostEntry 2 }
|
|
|
|
radiusAcctServerHostPort OBJECT-TYPE
|
|
SYNTAX INTEGER(0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Port of RADIUS accounting server."
|
|
::= { radiusAcctServerHostEntry 3 }
|
|
|
|
radiusAcctServerHostPrimary OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noPrimary(0),
|
|
primary(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configuration of primary or not primary "
|
|
::= { radiusAcctServerHostEntry 4 }
|
|
|
|
radiusAcctServerHostStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { radiusAcctServerHostEntry 5 }
|
|
|
|
--********************************************************************************************************
|
|
radiusServerTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time before retransmit of the RADIUS server."
|
|
::= { radiusMgt 7 }
|
|
|
|
radiusServerRetransmit OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Retransmit time before giving up the current RADIUS server."
|
|
::= { radiusMgt 8 }
|
|
|
|
radiusServerDeadTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The time before retry of the down-server."
|
|
::= { radiusMgt 9 }
|
|
|
|
radiusServerKey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Key for RADIUS."
|
|
::= { radiusMgt 10 }
|
|
|
|
radiusServerAccountTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER (60..3600)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Accounting update interval."
|
|
::= { radiusMgt 11 }
|
|
--********************************************************************************************************
|
|
-- (xxx.100.11) priQos group
|
|
|
|
--xxx.100.11.1
|
|
qos OBJECT IDENTIFIER ::= { priQos 1 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.11.1.1
|
|
qosEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"qos golbal switch.disable express close,enable is open."
|
|
::= { qos 1 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.11.1.2
|
|
qosPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"qos port configration."
|
|
::= { qos 2 }
|
|
|
|
--xxx.100.11.1.2.1
|
|
qosPortEntry OBJECT-TYPE
|
|
SYNTAX QosPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" qos port list of concrete definition.index is port index"
|
|
INDEX { qosPortIndex }
|
|
::= { qosPortTable 1 }
|
|
|
|
QosPortEntry
|
|
::= SEQUENCE
|
|
{
|
|
qosPortIndex INTEGER,
|
|
qosPortType INTEGER,
|
|
qosPortCos INTEGER,
|
|
qosPortTrust INTEGER,
|
|
qosPortPriority INTEGER,
|
|
qosPortMutation DisplayString,
|
|
qosPortQueue INTEGER,
|
|
qosPortStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.11.1.2.1.1
|
|
qosPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port Index"
|
|
::= { qosPortEntry 1 }
|
|
|
|
--xxx.100.11.1.2.1.2
|
|
qosPortType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
cos(1),
|
|
trust(0),
|
|
dscpMutation(2),
|
|
priorityQueueOut(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the relation between qosPortType and CLI:
|
|
1 mls qos cos {<default-cos> };
|
|
0 mls qos trust {cos [pass-through-cos] [pass-through-dscp]|dscp [pass-through-cos] [pass-through-dscp]| ip-precedence [pass-through-cos] [pass-through-dscp] |port priority <cos> [pass-through-cos] [pass-through-dscp]} ;
|
|
2 mls qos dscp-mutation <dscp-mutation-name>;
|
|
3 priority-queue out.
|
|
According to the relation,when configurate qos with snmp,first set the qosPortType to the correct value to select CLI,
|
|
then set next CLI parameter.Fox example,set qos default cos is 5, first set qosPortType=1 ,then set qosPortCos to 5,
|
|
finally setting qosPortStatus to 1, trigger snmp-cache works."
|
|
::= { qosPortEntry 2 }
|
|
|
|
--xxx.100.11.1.2.1.3
|
|
qosPortCos OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port default cos value"
|
|
::= { qosPortEntry 3 }
|
|
|
|
--xxx.100.11.1.2.1.4
|
|
qosPortTrust OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
priority(0),
|
|
priAndPassThroughDscp(1),
|
|
priAndPassThroughCos(2),
|
|
priAndPassThroughCosAndPassThroughDscp(3),
|
|
cos(4),
|
|
cosAndPassThroughDscp(5),
|
|
cosAndPassThroughCos(6),
|
|
cosAndPassThroughCosAndPassThroughDscp(7),
|
|
dscp(8),
|
|
dscpAndPassThroughCos(9),
|
|
dscpAndPassThroughDscp(10),
|
|
dscpAndPassThroughDscpAndPassThroughCos(11),
|
|
ipPrecedence(12),
|
|
ipPreAndPassThroughCos(13),
|
|
ipPreAndPassThroughDSCP(14),
|
|
ipPreAndPassThroughDSCPAndPassThroughCos(15),
|
|
mplsEXP(16)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure port trust.
|
|
priority(0),mls qos trust port priority <cos>;
|
|
priAndPassThroughDscp(1),opposite cli is mls qos trust port priority <cos> pass-through-dscp;
|
|
priAndPassThroughCos(2),opposite cli is mls qos trust port priority <cos> pass-through-cos;
|
|
priAndPassThroughCosAndPassThroughDscp(3),opposite cli is mls qos trust port priority <cos> pass-through-cos pass-through-dscp;
|
|
cos(4),mls qos trust cos;
|
|
cosAndPassThroughDscp(5),opposite cli is mls qos trust cos pass-through-dscp;
|
|
cosAndPassThroughCos(6),opposite cli is mls qos trust cos pass-through-cos;
|
|
cosAndPassThroughCosAndPassThroughDscp(7),opposite cli is mls qos trust cos pass-through-cos pass-through-dscp;
|
|
dscp(8),mls qos trust dscp;
|
|
dscpAndPassThroughCos(9),opposite cli is mls qos trust dscp pass-through-cos;
|
|
dscpAndPassThroughDscp(10),opposite cli is mls qos trust dscp pass-through-dscp;
|
|
dscpAndPassThroughDscpAndPassThroughCos(11),opposite cli is mls qos trust dscp pass-through-dscp pass-through-cos;
|
|
ipPrecedence(12), mls qos trust ip-precedence;
|
|
ipPreAndPassThroughCos(13),opposite cli is mls qos trust ip-precedence pass-through-cos;
|
|
ipPreAndPassThroughDSCP(14),opposite cli is mls qos trust ip-precedence pass-through-dscp;
|
|
ipPreAndPassThroughDSCPAndPassThroughCos(15),opposite cli is mls qos trust ip-precedence pass-through-dscp pass-through-cos;
|
|
mplsEXP(16),mls qos mpls trust exp."
|
|
::= { qosPortEntry 4 }
|
|
|
|
--xxx.100.11.1.2.1.5
|
|
qosPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The corresponding CLI:mls qos trust port priority <cos>."
|
|
::= { qosPortEntry 5 }
|
|
|
|
--xxx.100.11.1.2.1.6
|
|
qosPortMutation OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"configure port of dscp-mutation,opposite cli 'mls qos dscp-mutation <dscp-mutation-name>'"
|
|
::= { qosPortEntry 6 }
|
|
|
|
--xxx.100.11.1.2.1.7
|
|
qosPortQueue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
priorityQueue(0),
|
|
wrrQueue(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"priorityQueue configure queue out method to strict priority-queue method;
|
|
wrrQueue restores the default wrr queue out method."
|
|
::= { qosPortEntry 7 }
|
|
|
|
--xxx.100.11.1.2.1.8
|
|
qosPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qosPortEntry 8 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.11.1.3
|
|
qosClassMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosClassMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"classmap configure list"
|
|
::= { qos 3 }
|
|
|
|
--xxx.100.11.1.3.1
|
|
qosclassmapEntry OBJECT-TYPE
|
|
SYNTAX QosClassMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" about classmap list of concrete definition,index is classmapname."
|
|
INDEX { qosClassMapName }
|
|
::= { qosClassMapTable 1 }
|
|
|
|
QosClassMapEntry
|
|
::= SEQUENCE
|
|
{
|
|
qosClassMapName DisplayString,
|
|
qosClassMapType INTEGER,
|
|
qosClassMapAccessGroup DisplayString,
|
|
qosClassMapDscp DisplayString,
|
|
qosClassMapV6Dscp DisplayString,
|
|
qosClassMapIpPre DisplayString,
|
|
qosClassMapV6AccGroup DisplayString,
|
|
qosClassMapV6Flow DisplayString,
|
|
qosClassMapVlan DisplayString,
|
|
qosClassCos DisplayString,
|
|
qosClassMapEXPtopmost DisplayString,
|
|
qosClassMapStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.11.1.3.1.1
|
|
qosClassMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"classmap name"
|
|
::= { qosclassmapEntry 1}
|
|
|
|
--xxx.100.11.1.3.1.2
|
|
qosClassMapType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
configurClassMap(0),
|
|
accessGroup(1),
|
|
dscp(2),
|
|
v6dscp(5),
|
|
ippre(3),
|
|
v6AccessGroup(8),
|
|
v6Flow(7),
|
|
vlan(4),
|
|
cos(9),
|
|
exptopmost(10)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0 class-map <class-map-name>,index is classmapname;
|
|
1 match access-group <acl-index-or-name>,need qosClassMapAccessGroup cooperation;
|
|
2 match ip dscp <dscp-list> qosClassMapDscp ;
|
|
3 match ip precedence <ip-precedence-list> qosClassMapIpPre;
|
|
4 match vlan <vlan-list> qosClassMapVlan;
|
|
5 match ipv6 dscp <dscp-list> qosClassMapV6Dscp;
|
|
7 match ipv6 flowlabel qosClassMapV6Flow;
|
|
8 match ipv6 access-group qosClassMapV6AccGroup
|
|
9 match cos qosClassCos
|
|
10 match mpls-experimental topmost qosClassMapEXPtopmost"
|
|
::= { qosclassmapEntry 2 }
|
|
|
|
--xxx.100.11.1.3.1.3
|
|
qosClassMapAccessGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify access-group (name or number).
|
|
This object be configured only if qosClassMapType
|
|
in the same row is accessGroup(1)."
|
|
::= { qosclassmapEntry 3 }
|
|
|
|
--xxx.100.11.1.3.1.4
|
|
qosClassMapDscp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Dscp.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is dscp(2)."
|
|
::= { qosclassmapEntry 4 }
|
|
|
|
--xxx.100.11.1.3.1.5
|
|
qosClassMapV6Dscp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify ipv6 Dscp.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is v6dscp(5)."
|
|
::= { qosclassmapEntry 5 }
|
|
|
|
--xxx.100.11.1.3.1.6
|
|
qosClassMapIpPre OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Ip Precedence.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is ippre(3)."
|
|
::= { qosclassmapEntry 6 }
|
|
|
|
--xxx.100.11.1.3.1.7
|
|
qosClassMapV6AccGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Ipv6 Access-Group.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is v6AccessGroup(8)."
|
|
::= { qosclassmapEntry 7 }
|
|
|
|
--xxx.100.11.1.3.1.8
|
|
qosClassMapV6Flow OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Ipv6 Flowlabel.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is v6Flow(6)."
|
|
::= { qosclassmapEntry 8 }
|
|
|
|
--xxx.100.11.1.3.1.9
|
|
qosClassMapVlan OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Vlan list . At most 8 vlan id.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is vlan(4)."
|
|
::= { qosclassmapEntry 9 }
|
|
|
|
--xxx.100.11.1.3.1.10
|
|
qosClassCos OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Cos .
|
|
This object be configured only if qosClassMapType
|
|
in the same row is cos(9)."
|
|
::= { qosclassmapEntry 10 }
|
|
|
|
--xxx.100.11.1.3.1.11
|
|
qosClassMapEXPtopmost OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify MPLS EXP.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is EXPtopmost(10)."
|
|
::= { qosclassmapEntry 11 }
|
|
|
|
--xxx.100.11.1.3.1.12
|
|
qosClassMapStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qosclassmapEntry 12 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.11.1.4
|
|
qosPolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"qos policy list"
|
|
::= { qos 4 }
|
|
|
|
--xxx.100.11.1.4.1
|
|
qosPolicyEntry OBJECT-TYPE
|
|
SYNTAX QosPolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" qos policy list of definition,index is qos policy and classmap of name"
|
|
INDEX { qosPolicyName}
|
|
::= { qosPolicyTable 1 }
|
|
|
|
QosPolicyEntry
|
|
::= SEQUENCE
|
|
{
|
|
qosPolicyName DisplayString,
|
|
qosPolicyClassMap DisplayString,
|
|
qosPolicyType INTEGER,
|
|
qosPolicyRateKbps INTEGER,
|
|
qosPolicyNormalBurstKbps INTEGER,
|
|
qosPolicyMaximumBurstKbps INTEGER,
|
|
qosPolicyPeakKbps INTEGER,
|
|
qosPolicyConformAction INTEGER,
|
|
qosPolicyConformActionChangeValue INTEGER,
|
|
qosPolicyExceedAction INTEGER,
|
|
qosPolicyViolateAction INTEGER,
|
|
qosPolicyAggregatePolicer DisplayString,
|
|
qosPolicyStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.11.1.4.1.1
|
|
qosPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS Policy name"
|
|
::= { qosPolicyEntry 1 }
|
|
|
|
--xxx.100.11.1.4.1.2
|
|
qosPolicyClassMap OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the classmap name.After a policy map is created, it can be associated to a class.
|
|
So, if you want the class map to match the policy map,please setting the qosPolicyType to 1,and then
|
|
setting the qosPolicyStatus to 1 ."
|
|
::= { qosPolicyEntry 2 }
|
|
|
|
--xxx.100.11.1.4.1.3
|
|
qosPolicyType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
policymap(0),
|
|
matchclassmap(1),
|
|
sp(2),
|
|
aggregatePolicer(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the relation between qosPolicyType and CLI:
|
|
0 policy-map <policy-map-name>;
|
|
1 class <class-map-name>;
|
|
2 police <rate-kbps> <burst-kbyte> [exceed-action {drop | policed-dscp-transmit}];
|
|
3 police aggregate <aggregate-policer-name>; "
|
|
::= { qosPolicyEntry 3 }
|
|
|
|
--xxx.100.11.1.4.1.4
|
|
qosPolicyRateKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Bandwidth of one policymap.
|
|
This object be configured only if qosPolicyType
|
|
in the same row is sp(2). "
|
|
::= { qosPolicyEntry 4 }
|
|
|
|
--xxx.100.11.1.4.1.5
|
|
qosPolicyNormalBurstKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Normal burst kbytes."
|
|
::= { qosPolicyEntry 5 }
|
|
|
|
--xxx.100.11.1.4.1.6
|
|
qosPolicyMaximumBurstKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum burst kbytes."
|
|
::= { qosPolicyEntry 6 }
|
|
|
|
--xxx.100.11.1.4.1.7
|
|
qosPolicyPeakKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Peak information rate."
|
|
::= { qosPolicyEntry 7 }
|
|
|
|
--xxx.100.11.1.4.1.8
|
|
qosPolicyConformAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
set-dscp-transmit(2),
|
|
set-prec-transmit(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"conform-action transmit means send packets without any change when specified speed is not exceeded;
|
|
conform-action drop means drop packets when specified speed is not exceeded;
|
|
conform-action set-dscp-transmit specifies to mark down packet DSCP value
|
|
according to policed-dscp mapping when specified speed is not exceeded;
|
|
conform-action set-prec-transmit specifies to mark down packet TOS value
|
|
according to policed-dscp mapping when specified speed is not exceeded."
|
|
::= { qosPolicyEntry 8 }
|
|
|
|
--xxx.100.11.1.4.1.9
|
|
qosPolicyConformActionChangeValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If conform-action is set-dscp-transmit(2),the value is between 0-63;
|
|
else if conform-action is set-prec-transmit(2),the value is between 0-7."
|
|
::= { qosPolicyEntry 9 }
|
|
|
|
--xxx.100.11.1.4.1.10
|
|
qosPolicyExceedAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
policeDscpTransmit(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"exceed-action transmit means send packets without any change when specified speed is exceeded;
|
|
exceed-action drop means drop packets when specified speed is exceeded;
|
|
exceed-action policed-dscp-transmit specifies to mark down packet DSCP value
|
|
according to policed-dscp mapping when specified speed is exceeded."
|
|
::= { qosPolicyEntry 10 }
|
|
|
|
--xxx.100.11.1.4.1.11
|
|
qosPolicyViolateAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
policeDscpTransmit(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"violate-action transmit means send packets without any change when specified speed is violate;
|
|
violate-action drop means drop packets when specified speed is violate;
|
|
violate-action policed-dscp-transmit specifies to mark down packet DSCP value
|
|
according to policed-dscp mapping when specified speed is violate."
|
|
::= { qosPolicyEntry 11 }
|
|
|
|
--xxx.100.11.1.4.1.12
|
|
qosPolicyAggregatePolicer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"aggregate-policer-name.
|
|
This object be configured only if qosPolicyType
|
|
in the same row is aggregatePolicer(3)."
|
|
::= { qosPolicyEntry 12 }
|
|
|
|
--xxx.100.11.1.4.1.13
|
|
qosPolicyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qosPolicyEntry 13 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.11.1.5
|
|
qosAggPolicerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosAggPolicerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"qos of AggPolicer list,use it can configure one item AggPolicer,Attention : the get/get next operation can only get snmp cache content,
|
|
please refer to qosshow node for the running configuraton"
|
|
::= { qos 5 }
|
|
|
|
--xxx.100.11.1.5.1
|
|
qosAggPolicerEntry OBJECT-TYPE
|
|
SYNTAX QosAggPolicerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" index is AggPolicer name."
|
|
INDEX { qosAggPolicerName }
|
|
::= { qosAggPolicerTable 1 }
|
|
|
|
QosAggPolicerEntry
|
|
::= SEQUENCE
|
|
{
|
|
qosAggPolicerName DisplayString,
|
|
qosAggPolicerRateKbps INTEGER,
|
|
qosAggPolicerNormalBurstKbps INTEGER,
|
|
qosAggPolicerMaximumBurstKbps INTEGER,
|
|
qosAggPolicerPeakKbps INTEGER,
|
|
qosAggPolicerConformAction INTEGER,
|
|
qosAggPolicerConformActionChangeValue INTEGER,
|
|
qosAggPolicerExceedAction INTEGER,
|
|
qosAggPolicerViolateAction INTEGER,
|
|
qosAggPolicerStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.11.1.5.1.1
|
|
qosAggPolicerName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS qosAggPolicer name"
|
|
::= { qosAggPolicerEntry 1 }
|
|
|
|
--xxx.100.11.1.5.1.2
|
|
qosAggPolicerRateKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rate Bandwidth of After the classification."
|
|
::= { qosAggPolicerEntry 2 }
|
|
|
|
--xxx.100.11.1.5.1.3
|
|
qosAggPolicerNormalBurstKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Normal burst kbytes."
|
|
::= { qosAggPolicerEntry 3 }
|
|
|
|
--xxx.100.11.1.5.1.4
|
|
qosAggPolicerMaximumBurstKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum burst kbytes."
|
|
::= { qosAggPolicerEntry 4 }
|
|
|
|
--xxx.100.11.1.5.1.5
|
|
qosAggPolicerPeakKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Peak information rate."
|
|
::= { qosAggPolicerEntry 5 }
|
|
|
|
--xxx.100.11.1.5.1.6
|
|
qosAggPolicerConformAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
set-dscp-transmit(2),
|
|
set-prec-transmit(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"conform-action transmit means send packets without any change when specified speed is not exceeded;
|
|
conform-action drop means drop packets when specified speed is not exceeded;
|
|
conform-action set-dscp-transmit specifies to mark down packet DSCP value
|
|
according to policed-dscp mapping when specified speed is not exceeded;
|
|
conform-action set-prec-transmit specifies to mark down packet TOS value
|
|
according to policed-dscp mapping when specified speed is not exceeded."
|
|
::= { qosAggPolicerEntry 6 }
|
|
|
|
--xxx.100.11.1.5.1.7
|
|
qosAggPolicerConformActionChangeValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If conform-action is set-dscp-transmit(2),the value is between 0-63;
|
|
else if conform-action is set-prec-transmit(2),the value is between 0-7."
|
|
::= { qosAggPolicerEntry 7 }
|
|
|
|
--xxx.100.11.1.5.1.8
|
|
qosAggPolicerExceedAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
policeDscpTransmit(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"exceed-action transmit means send packets without any change when specified speed is exceeded;
|
|
exceed-action drop means drop packets when specified speed is exceeded;
|
|
exceed-action policed-dscp-transmit specifies to mark down packet DSCP value
|
|
according to policed-dscp mapping when specified speed is exceeded."
|
|
::= { qosAggPolicerEntry 8 }
|
|
|
|
--xxx.100.11.1.5.1.9
|
|
qosAggPolicerViolateAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
policeDscpTransmit(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"violate-action transmit means send packets without any change when specified speed is violate;
|
|
violate-action drop means drop packets when specified speed is violate;
|
|
violate-action policed-dscp-transmit specifies to mark down packet DSCP value
|
|
according to policed-dscp mapping when specified speed is violate."
|
|
::= { qosAggPolicerEntry 9 }
|
|
|
|
--xxx.100.11.1.5.1.10
|
|
qosAggPolicerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qosAggPolicerEntry 10 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.11.1.6
|
|
qosSetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark new dscp or ip precedence for classified flow"
|
|
::= { qos 6 }
|
|
|
|
--xxx.100.11.1.6.1
|
|
qosSetEntry OBJECT-TYPE
|
|
SYNTAX QosSetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" qosSetTable list of acce index policyname and classmap name."
|
|
INDEX { qosSetPolicyMapName }
|
|
::= { qosSetTable 1 }
|
|
|
|
QosSetEntry
|
|
::= SEQUENCE
|
|
{
|
|
qosSetPolicyMapName DisplayString,
|
|
qosSetClassMapName DisplayString,
|
|
qosSetType INTEGER,
|
|
qosSetdscp INTEGER,
|
|
qosSetprecedence INTEGER,
|
|
qosSetnextHop IpAddress,
|
|
qosSetv6Dscp INTEGER,
|
|
qosSetv6FlowLabel INTEGER,
|
|
qosSetv6nextHop DisplayString,
|
|
qosSetCos INTEGER,
|
|
qosSetEXPimposition INTEGER,
|
|
qosSetStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.11.1.6.1.1
|
|
qosSetPolicyMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS Policy name"
|
|
::= { qosSetEntry 1 }
|
|
|
|
--xxx.100.11.1.6.1.2
|
|
qosSetClassMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS class map name"
|
|
::= { qosSetEntry 2 }
|
|
|
|
--xxx.100.11.1.6.1.3
|
|
qosSetType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dscp(1),
|
|
precedence(2),
|
|
nextHop(3),
|
|
v6Dscp(4),
|
|
v6FlowLabel(6),
|
|
v6nextHop(7),
|
|
cos(8),
|
|
expimposition(9)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"qosSetType range:1,2,3,4,5,6,7,8,9
|
|
1 dscp Set IP DSCP (DiffServ CodePoints);
|
|
2 precedence Set IP precedence;
|
|
3 nexthop Set IP nexthop;
|
|
4 dscp Set IPv6 DSCP (DiffServ CodePoints);
|
|
6 flowlabel Set IPv6 flowlabel;
|
|
7 v6nextHop Set IPv6 nexthop;
|
|
8 cos Set CoS ;
|
|
9 expimposition Set mpls-experimental-imposition "
|
|
::= { qosSetEntry 3 }
|
|
|
|
--xxx.100.11.1.6.1.4
|
|
qosSetdscp OBJECT-TYPE
|
|
SYNTAX INTEGER(0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark dscp for the classified flow"
|
|
::= { qosSetEntry 4 }
|
|
|
|
--xxx.100.11.1.6.1.5
|
|
qosSetprecedence OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark ip precedence for classified flow"
|
|
::= { qosSetEntry 5 }
|
|
|
|
--xxx.100.11.1.6.1.6
|
|
qosSetnextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"set nexthop for classified flow"
|
|
::= { qosSetEntry 6 }
|
|
|
|
--xxx.100.11.1.6.1.7
|
|
qosSetv6Dscp OBJECT-TYPE
|
|
SYNTAX INTEGER(0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark ipv6 dscp for classified flow"
|
|
::= { qosSetEntry 7 }
|
|
|
|
--xxx.100.11.1.6.1.8
|
|
qosSetv6FlowLabel OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1048575)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark ipv6 flow lable for classified flow"
|
|
::= { qosSetEntry 8 }
|
|
|
|
--xxx.100.11.1.6.1.9
|
|
qosSetv6nextHop OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"set IPv6 nexthop for classified flow"
|
|
::= { qosSetEntry 9 }
|
|
|
|
--xxx.100.11.1.6.1.10
|
|
qosSetCos OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark cos for classified flow"
|
|
::= { qosSetEntry 10 }
|
|
|
|
--xxx.100.11.1.6.1.11
|
|
qosSetEXPimposition OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark MPLS EXP value for classified flow"
|
|
::= { qosSetEntry 11 }
|
|
|
|
--xxx.100.11.1.6.1.12
|
|
qosSetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qosSetEntry 12 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.11.1.7
|
|
qosPortBindTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosPortBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Apply a policy map to the specified port."
|
|
::= { qos 7 }
|
|
|
|
--xxx.100.11.1.7.1
|
|
qosPortBindEntry OBJECT-TYPE
|
|
SYNTAX QosPortBindEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the index of this entry is port-index and policy-map"
|
|
INDEX { qosPortBindIndex , qosPortBindPolicy }
|
|
::= { qosPortBindTable 1 }
|
|
|
|
QosPortBindEntry
|
|
::= SEQUENCE
|
|
{
|
|
qosPortBindIndex INTEGER,
|
|
qosPortBindPolicy DisplayString,
|
|
qosPortBindType INTEGER
|
|
}
|
|
|
|
--xxx.100.11.1.7.1.1
|
|
qosPortBindIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS Port Index"
|
|
::= { qosPortBindEntry 1 }
|
|
|
|
--xxx.100.11.1.7.1.2
|
|
qosPortBindPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS Policy name"
|
|
::= { qosPortBindEntry 2 }
|
|
|
|
--xxx.100.11.1.7.1.3
|
|
qosPortBindType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
input(1),
|
|
output(2),
|
|
noinput(3),
|
|
nooutput(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" input(1),bind the policy-map to ingress port;
|
|
output(2),bind the policy-map to egress port;
|
|
noinput(3),unbind the policy-map to ingress port;
|
|
nooutput(4), unbind the policy-map to egress port"
|
|
::= { qosPortBindEntry 3 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.11.1.8
|
|
qosPortQueueTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosPortQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"set golbal qos WRR weight"
|
|
::= { qos 8 }
|
|
|
|
--xxx.100.11.1.8.1
|
|
qosPortQueueEntry OBJECT-TYPE
|
|
SYNTAX QosPortQueueEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" set port qos WRR weight,index is port index."
|
|
INDEX { qosPortQueueIndex }
|
|
::= { qosPortQueueTable 1 }
|
|
|
|
QosPortQueueEntry
|
|
::= SEQUENCE
|
|
{
|
|
qosPortQueueIndex INTEGER,
|
|
qosPortQueueWeight1 INTEGER,
|
|
qosPortQueueWeight2 INTEGER,
|
|
qosPortQueueWeight3 INTEGER,
|
|
qosPortQueueWeight4 INTEGER,
|
|
qosPortQueueWeight5 INTEGER,
|
|
qosPortQueueWeight6 INTEGER,
|
|
qosPortQueueWeight7 INTEGER,
|
|
qosPortQueueWeight8 INTEGER,
|
|
qosPortQueueStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.11.1.8.1.1
|
|
qosPortQueueIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS Port Index"
|
|
::= { qosPortQueueEntry 1 }
|
|
|
|
--xxx.100.11.1.8.1.2
|
|
qosPortQueueWeight1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WRR weight,range is 0~15."
|
|
::= { qosPortQueueEntry 2 }
|
|
|
|
--xxx.100.11.1.8.1.3
|
|
qosPortQueueWeight2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WRR weight,range is 0~15."
|
|
::= { qosPortQueueEntry 3 }
|
|
|
|
--xxx.100.11.1.8.1.4
|
|
qosPortQueueWeight3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WRR weight,range is 0~15."
|
|
::= { qosPortQueueEntry 4 }
|
|
|
|
--xxx.100.11.1.8.1.5
|
|
qosPortQueueWeight4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WRR weight,range is 0~15."
|
|
::= { qosPortQueueEntry 5 }
|
|
|
|
--xxx.100.11.1.8.1.6
|
|
qosPortQueueWeight5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WRR weight,range is 0~15."
|
|
::= { qosPortQueueEntry 6 }
|
|
|
|
--xxx.100.11.1.8.1.7
|
|
qosPortQueueWeight6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WRR weight,range is 0~15."
|
|
::= { qosPortQueueEntry 7 }
|
|
|
|
--xxx.100.11.1.8.1.8
|
|
qosPortQueueWeight7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WRR weight,range is 0~15."
|
|
::= { qosPortQueueEntry 8 }
|
|
|
|
--xxx.100.11.1.8.1.9
|
|
qosPortQueueWeight8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WRR weight,range is 0~15."
|
|
::= { qosPortQueueEntry 9 }
|
|
|
|
--xxx.100.11.1.8.1.10
|
|
qosPortQueueStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting it to active(1) creates an entry.Setting it to destroy(2) destroys an entry."
|
|
::= { qosPortQueueEntry 10 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.11.1.9
|
|
qosPortCosMapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QosPortCosMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS-Queue map"
|
|
::= { qos 9 }
|
|
|
|
--xxx.100.11.1.9.1
|
|
qosPortCosMapEntry OBJECT-TYPE
|
|
SYNTAX QosPortCosMapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" COS-Queue map,index is cos-Queue map ID."
|
|
INDEX { qosPortCosMapQueueId }
|
|
::= { qosPortCosMapTable 1 }
|
|
|
|
QosPortCosMapEntry
|
|
::= SEQUENCE
|
|
{
|
|
qosPortCosMapQueueId INTEGER,
|
|
qosPortCosMapCos1 INTEGER,
|
|
qosPortCosMapCos2 INTEGER,
|
|
qosPortCosMapCos3 INTEGER,
|
|
qosPortCosMapCos4 INTEGER,
|
|
qosPortCosMapCos5 INTEGER,
|
|
qosPortCosMapCos6 INTEGER,
|
|
qosPortCosMapCos7 INTEGER,
|
|
qosPortCosMapCos8 INTEGER,
|
|
qosPortCosMapStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.11.1.9.1.1
|
|
qosPortCosMapQueueId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"queue ID"
|
|
::= { qosPortCosMapEntry 1 }
|
|
|
|
--xxx.100.11.1.9.1.2
|
|
qosPortCosMapCos1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS range is 0~7"
|
|
::= { qosPortCosMapEntry 2 }
|
|
|
|
--xxx.100.11.1.9.1.3
|
|
qosPortCosMapCos2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS range is 0~7"
|
|
::= { qosPortCosMapEntry 3 }
|
|
|
|
--xxx.100.11.1.9.1.4
|
|
qosPortCosMapCos3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS range is 0~7"
|
|
::= { qosPortCosMapEntry 4 }
|
|
|
|
--xxx.100.11.1.9.1.5
|
|
qosPortCosMapCos4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS range is 0~7"
|
|
::= { qosPortCosMapEntry 5 }
|
|
|
|
--xxx.100.11.1.9.1.6
|
|
qosPortCosMapCos5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS range is 0~7"
|
|
::= { qosPortCosMapEntry 6 }
|
|
|
|
--xxx.100.11.1.9.1.7
|
|
qosPortCosMapCos6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS range is 0~7"
|
|
::= { qosPortCosMapEntry 7 }
|
|
|
|
--xxx.100.11.1.9.1.8
|
|
qosPortCosMapCos7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS range is 0~7"
|
|
::= { qosPortCosMapEntry 8 }
|
|
|
|
--xxx.100.11.1.9.1.9
|
|
qosPortCosMapCos8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS range is 0~7"
|
|
::= { qosPortCosMapEntry 9 }
|
|
|
|
--xxx.100.11.1.9.1.10
|
|
qosPortCosMapStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qosPortCosMapEntry 10 }
|
|
|
|
--********************************************************************************************************
|
|
--xxx.100.11.1.10
|
|
qosMap OBJECT IDENTIFIER ::= { qos 10 }
|
|
|
|
--set class of service(CoS)-to-Differentiated Services Code Point (DSCP) map,DSCP-to-CoS map,DSCP-to-DSCP-mutation map,IP-precedence-to-DSCP map and policed-DSCP map
|
|
--xxx.100.11.1.10.1
|
|
qosMapType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
cosDscp(1),
|
|
dscpCos(2),
|
|
dscpMutation(3),
|
|
ipPrecDscp(4),
|
|
policedDscp(5),
|
|
expdscp(6),
|
|
dscpexp(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"qosMapType range is 1~5.1 mls qos map cos-dscp <dscp1...dscp8>;
|
|
2 mls qos map dscp-cos <dscp-list> to <cos>;
|
|
3 mls qos map dscp-mutation <dscp-mutation-name> <in-dscp> to <out-dscp>;
|
|
4 mls qos map ip-prec-dscp <dscp1...dscp8>;
|
|
5 mls qos map policed-dscp <dscp-list> to <mark-down-dscp>;
|
|
6 mls qos map exp-dscp <dscp-value-list>;
|
|
7 mls qos map dscp-exp <dscp-value-list> to <exp>
|
|
When you want to configure the Map of DSCP to COS,please configure the qosMapType==2 firstly,
|
|
input the dscp(1~8) optionally, then configure the qosMapCos , valid/invalid the qosMapStatus finally."
|
|
|
|
::= { qosMap 1 }
|
|
|
|
--xxx.100.11.1.10.2
|
|
qosMapDscp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP-CoS map,DSCP range is 0~63"
|
|
::= { qosMap 2 }
|
|
|
|
--xxx.100.11.1.10.3
|
|
qosMapDscp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP-CoS map,DSCP range is 0~63"
|
|
::= { qosMap 3 }
|
|
|
|
--xxx.100.11.1.10.4
|
|
qosMapDscp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP-CoS map,DSCP range is 0~63"
|
|
::= { qosMap 4 }
|
|
|
|
--xxx.100.11.1.10.5
|
|
qosMapDscp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP-CoS map,DSCP range is 0~63"
|
|
::= { qosMap 5 }
|
|
|
|
--xxx.100.11.1.10.6
|
|
qosMapDscp5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP-CoS map,DSCP range is 0~63"
|
|
::= { qosMap 6 }
|
|
|
|
--xxx.100.11.1.10.7
|
|
qosMapDscp6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP-CoS map,DSCP range is 0~63"
|
|
::= { qosMap 7 }
|
|
|
|
--xxx.100.11.1.10.8
|
|
qosMapDscp7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP-CoS map,DSCP range is 0~63"
|
|
::= { qosMap 8 }
|
|
|
|
--xxx.100.11.1.10.9
|
|
qosMapDscp8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP-CoS map,DSCP range is 0~63"
|
|
::= { qosMap 9 }
|
|
|
|
--xxx.100.11.1.10.10
|
|
qosMapCos OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the cos which DSCP map to "
|
|
::= { qosMap 10 }
|
|
|
|
--xxx.100.11.1.10.11
|
|
qosMapEXP OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the EXP value which DSCP map to "
|
|
::= { qosMap 11 }
|
|
--xxx.100.11.1.10.12
|
|
qosMapMarkDownDscp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the dscp after mark down"
|
|
::= { qosMap 12 }
|
|
|
|
--xxx.100.11.1.10.13
|
|
qosMapMarkDownType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal-burst(0),
|
|
max-burst(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"normal-burst:markdown map used by the exceed-action;max-burst:markdown map used by the violate-action."
|
|
::= { qosMap 13 }
|
|
|
|
--xxx.100.11.1.10.14
|
|
qosMapMutationName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"map name"
|
|
::= { qosMap 14 }
|
|
|
|
--xxx.100.11.1.10.15
|
|
qosMapMutationOut OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"egress DSCP,only one,eight ingress DSCP value map to one egress value"
|
|
::= { qosMap 15 }
|
|
--xxx.100.11.1.10.16
|
|
qosMapStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qosMap 16 }
|
|
|
|
|
|
--xxx.100.11
|
|
showqos OBJECT IDENTIFIER ::= { qos 11 }
|
|
|
|
--xxx.100.16.2.1
|
|
showclassmapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ShowclassmapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" show class map table"
|
|
::= { showqos 1}
|
|
|
|
--xxx.100.16.2.1.1
|
|
showclassmapEntry OBJECT-TYPE
|
|
SYNTAX ShowclassmapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" show class map entry"
|
|
INDEX { showclassmapname}
|
|
::= { showclassmapTable 1 }
|
|
|
|
ShowclassmapEntry
|
|
::= SEQUENCE
|
|
{
|
|
showclassmapname DisplayString,
|
|
showclassmapmatch DisplayString
|
|
}
|
|
|
|
--xxx.100.16.2.1.1.1
|
|
showclassmapname OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" classmap name"
|
|
::= { showclassmapEntry 1 }
|
|
|
|
--xxx.100.16.2.1.1.2
|
|
showclassmapmatch OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "one item classmap match rule"
|
|
::= { showclassmapEntry 2 }
|
|
|
|
|
|
--xxx.100.16.2.1
|
|
showpolicymapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ShowpolicymapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" show policy list"
|
|
::= { showqos 2}
|
|
|
|
--xxx.100.16.2.1.1
|
|
showpolicymapEntry OBJECT-TYPE
|
|
SYNTAX ShowpolicymapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" policy map entry"
|
|
INDEX { showpolicymapname}
|
|
::= { showpolicymapTable 1 }
|
|
|
|
ShowpolicymapEntry
|
|
::= SEQUENCE
|
|
{
|
|
showpolicymapname DisplayString,
|
|
showpolicymapcontent DisplayString
|
|
}
|
|
|
|
--xxx.100.16.2.1.1.1
|
|
showpolicymapname OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" policy name"
|
|
::= { showpolicymapEntry 1 }
|
|
|
|
--xxx.100.16.2.1.1.2
|
|
showpolicymapcontent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "the match classmap and all defined other rules"
|
|
::= { showpolicymapEntry 2 }
|
|
|
|
|
|
--xxx.100.16.2.1
|
|
showqosaggregatepolicerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ShowqosaggregatepolicerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" display aggregatepolicer list"
|
|
::= { showqos 3}
|
|
|
|
--xxx.100.16.2.1.1
|
|
showqosaggregatepolicerEntry OBJECT-TYPE
|
|
SYNTAX ShowqosaggregatepolicerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" aggregatepolicer entry,index is showqosaggregatepolicername"
|
|
INDEX { showqosaggregatepolicername}
|
|
::= { showqosaggregatepolicerTable 1 }
|
|
|
|
ShowqosaggregatepolicerEntry
|
|
::= SEQUENCE
|
|
{
|
|
showqosaggregatepolicername DisplayString,
|
|
showqosaggregatepolicercontent DisplayString
|
|
}
|
|
|
|
--xxx.100.16.2.1.1.1
|
|
showqosaggregatepolicername OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" aggregatepolicer name"
|
|
::= { showqosaggregatepolicerEntry 1 }
|
|
|
|
--xxx.100.16.2.1.1.2
|
|
showqosaggregatepolicercontent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "aggregatepolicer parameter"
|
|
::= { showqosaggregatepolicerEntry 2 }
|
|
|
|
|
|
--xxx.100.16.2.1
|
|
showmlsqosinterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ShowmlsqosinterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" show port qos configuration"
|
|
::= { showqos 4}
|
|
|
|
--xxx.100.16.2.1.1
|
|
showmlsqosinterfaceEntry OBJECT-TYPE
|
|
SYNTAX ShowmlsqosinterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" showmlsqosinterfaceTable,index is port-index"
|
|
INDEX { showmlsqosinterfaceIndex}
|
|
::= { showmlsqosinterfaceTable 1 }
|
|
|
|
ShowmlsqosinterfaceEntry
|
|
::= SEQUENCE
|
|
{
|
|
showmlsqosinterfaceIndex INTEGER,
|
|
showmlsqosinterfaceqoscontent DisplayString
|
|
}
|
|
|
|
--xxx.100.16.2.1.1.1
|
|
showmlsqosinterfaceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" port index"
|
|
::= { showmlsqosinterfaceEntry 1 }
|
|
|
|
--xxx.100.16.2.1.1.2
|
|
showmlsqosinterfaceqoscontent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "qos port configuration"
|
|
::= { showmlsqosinterfaceEntry 2 }
|
|
|
|
--xxx.100.9
|
|
showmlsqosmaps OBJECT IDENTIFIER ::= { showqos 5 }
|
|
|
|
--xxx.100.16.1.1
|
|
showmlsqosmapscosdscp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"cos-dscp map "
|
|
::= { showmlsqosmaps 1 }
|
|
|
|
--xxx.100.16.1.2
|
|
showmlsqosmapscosqueue OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS-wrr-queue map"
|
|
::= { showmlsqosmaps 2 }
|
|
--xxx.100.16.1.3
|
|
showmlsqosmapsdscpcos OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP-COS map"
|
|
::= { showmlsqosmaps 3 }
|
|
|
|
--xxx.100.16.1.4
|
|
showmlsqosmapsipprecdscp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP precedence to DSCP map"
|
|
::= { showmlsqosmaps 4 }
|
|
--xxx.100.16.1.5
|
|
showmlsqosmapspoliceddscp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DSCP mark down map"
|
|
::= { showmlsqosmaps 5 }
|
|
|
|
--xxx.100.16.1.6
|
|
showmlsqosmapspoliceddscpnormalburst OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Normal Burst Policed-dscp map"
|
|
::= { showmlsqosmaps 6 }
|
|
|
|
--xxx.100.16.1.7
|
|
showmlsqosmapsexpdscp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" EXP to DSCP map"
|
|
::= { showmlsqosmaps 7 }
|
|
|
|
--xxx.100.16.1.8
|
|
showmlsqosmapsdscpexp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" DSCP to EXP map"
|
|
::= { showmlsqosmaps 8 }
|
|
|
|
--xxx.100.16.2.1
|
|
showmlsqosmapsdscpmutationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ShowmlsqosmapsdscpmutationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" ingress DSCP to egress DSCP map"
|
|
::= { showqos 6}
|
|
|
|
--xxx.100.16.2.1.1
|
|
showmlsqosmapsdscpmutationEntry OBJECT-TYPE
|
|
SYNTAX ShowmlsqosmapsdscpmutationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"index is dscpmutationname"
|
|
INDEX { showmlsqosmapsdscpmutationname}
|
|
::= { showmlsqosmapsdscpmutationTable 1 }
|
|
|
|
ShowmlsqosmapsdscpmutationEntry
|
|
::= SEQUENCE
|
|
{
|
|
showmlsqosmapsdscpmutationname DisplayString,
|
|
showmlsqosmapsdscpmutationcontent DisplayString
|
|
}
|
|
|
|
--xxx.100.16.2.1.1.1
|
|
showmlsqosmapsdscpmutationname OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..128))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" dscpmutationname."
|
|
::= { showmlsqosmapsdscpmutationEntry 1 }
|
|
|
|
--xxx.100.16.2.1.1.2
|
|
showmlsqosmapsdscpmutationcontent OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "DSCP-DSCP map"
|
|
::= { showmlsqosmapsdscpmutationEntry 2 }
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.12.1
|
|
mirrorDestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MirrorDestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination port for mirrored packets."
|
|
::= { primirror 1}
|
|
|
|
--xxx.100.12.1.1
|
|
mirrorDestEntry OBJECT-TYPE
|
|
SYNTAX MirrorDestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination port for mirrored packets."
|
|
INDEX { mirrorDestSession }
|
|
::= { mirrorDestTable 1 }
|
|
|
|
MirrorDestEntry
|
|
::= SEQUENCE
|
|
{
|
|
mirrorDestSession INTEGER,
|
|
mirrorDestPort DisplayString,
|
|
mirrorDestStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.12.1.1.1
|
|
mirrorDestSession OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Session ID."
|
|
::= { mirrorDestEntry 1 }
|
|
|
|
--xxx.100.12.1.1.2
|
|
mirrorDestPort OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..20))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "mirror destination port eg:Ethernet1/1."
|
|
::= { mirrorDestEntry 2 }
|
|
|
|
--xxx.100.12.1.1.3
|
|
mirrorDestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Status."
|
|
::= { mirrorDestEntry 3 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.12.2
|
|
mirrorSrcPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MirrorSrcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Src port for mirrored packets."
|
|
::= { primirror 2}
|
|
|
|
--xxx.100.12.2.1
|
|
mirrorSrcPortEntry OBJECT-TYPE
|
|
SYNTAX MirrorSrcPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Src port for mirrored packets."
|
|
INDEX { mirrorSrcPortSession , mirrorSrcPortDirect }
|
|
::= { mirrorSrcPortTable 1 }
|
|
|
|
MirrorSrcPortEntry
|
|
::= SEQUENCE
|
|
{
|
|
mirrorSrcPortSession INTEGER,
|
|
mirrorSrcPortDirect INTEGER,
|
|
mirrorSrcPort DisplayString,
|
|
mirrorSrcPortStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.12.2.1.1
|
|
mirrorSrcPortSession OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Session ID."
|
|
::= { mirrorSrcPortEntry 1 }
|
|
|
|
--xxx.100.12.2.1.2
|
|
mirrorSrcPortDirect OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rx(1),
|
|
tx(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Direction of mirror."
|
|
::= { mirrorSrcPortEntry 2 }
|
|
|
|
--xxx.100.12.2.1.3
|
|
mirrorSrcPort OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..512))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "mirror source port. eg:Ethernet1/1."
|
|
::= { mirrorSrcPortEntry 3 }
|
|
|
|
--xxx.100.12.2.1.4
|
|
mirrorSrcPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Status."
|
|
::= { mirrorSrcPortEntry 4 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.12.3
|
|
mirrorSrcCpuTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MirrorSrcCpuEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Src Cpu for mirrored packets."
|
|
::= { primirror 3}
|
|
|
|
--xxx.100.12.3.1
|
|
mirrorSrcCpuEntry OBJECT-TYPE
|
|
SYNTAX MirrorSrcCpuEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Src Cpu for mirrored packets."
|
|
INDEX { mirrorSrcCpuSession , mirrorSrcCpuDirect , mirrorSrcCpuSlot }
|
|
::= { mirrorSrcCpuTable 1 }
|
|
|
|
MirrorSrcCpuEntry
|
|
::= SEQUENCE
|
|
{
|
|
mirrorSrcCpuSession INTEGER,
|
|
mirrorSrcCpuDirect INTEGER,
|
|
mirrorSrcCpuSlot INTEGER,
|
|
mirrorSrcCpuStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.12.3.1.1
|
|
mirrorSrcCpuSession OBJECT-TYPE
|
|
SYNTAX INTEGER(4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Session ID."
|
|
::= { mirrorSrcCpuEntry 1 }
|
|
|
|
--xxx.100.12.3.1.2
|
|
mirrorSrcCpuDirect OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rx(1),
|
|
tx(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Direction of mirror."
|
|
::= { mirrorSrcCpuEntry 2 }
|
|
|
|
--xxx.100.12.3.1.3
|
|
mirrorSrcCpuSlot OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Src cpu slot index."
|
|
::= { mirrorSrcCpuEntry 3 }
|
|
|
|
--xxx.100.12.3.1.4
|
|
mirrorSrcCpuStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Status."
|
|
::= { mirrorSrcCpuEntry 4 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.12.4
|
|
mirrorReflectorPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MirrorReflectorPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"mirror reflector destination port configuration Table of Rspan.
|
|
The information about the reflector destination port and
|
|
its associated session will be specified by this table,which
|
|
will not present itself in the mirrorDestTable. Which means
|
|
the mirrorReflectorPortTable and the mirrorDestTable is
|
|
independent from each other."
|
|
::= { primirror 4}
|
|
|
|
--xxx.100.12.4.1
|
|
mirrorReflectorPortEntry OBJECT-TYPE
|
|
SYNTAX MirrorReflectorPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"mirror destination port configuration of Rspan."
|
|
INDEX { mirrorReflectorPortSession , mirrorReflectorPort }
|
|
::= { mirrorReflectorPortTable 1 }
|
|
|
|
MirrorReflectorPortEntry
|
|
::= SEQUENCE
|
|
{
|
|
mirrorReflectorPortSession INTEGER,
|
|
mirrorReflectorPort INTEGER,
|
|
mirrorReflectorPortStatus INTEGER
|
|
}
|
|
|
|
|
|
--xxx.100.12.4.1.1
|
|
mirrorReflectorPortSession OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Session ID."
|
|
::= { mirrorReflectorPortEntry 1 }
|
|
|
|
--xxx.100.12.4.1.2
|
|
mirrorReflectorPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "mirror reflector destination port number."
|
|
::= { mirrorReflectorPortEntry 2 }
|
|
|
|
|
|
--xxx.100.12.4.1.3
|
|
mirrorReflectorPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The configuration status of the reflector destination port and its associated session."
|
|
::= { mirrorReflectorPortEntry 3 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.12.5
|
|
mirrorRspanVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MirrorRspanVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan configuration Table of Rspan."
|
|
::= { primirror 5}
|
|
|
|
--xxx.100.12.5.1
|
|
mirrorRspanVlanEntry OBJECT-TYPE
|
|
SYNTAX MirrorRspanVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan configuration of Rspan."
|
|
INDEX { mirrorRspanVlan }
|
|
::= { mirrorRspanVlanTable 1 }
|
|
|
|
MirrorRspanVlanEntry
|
|
::= SEQUENCE
|
|
{
|
|
mirrorRspanVlan INTEGER,
|
|
mirrorRspanVlanStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.12.5.1.1
|
|
mirrorRspanVlan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan ID."
|
|
::= { mirrorRspanVlanEntry 1 }
|
|
|
|
--xxx.100.12.5.1.2
|
|
mirrorRspanVlanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Vlan status."
|
|
::= { mirrorRspanVlanEntry 2 }
|
|
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.12.6
|
|
mirrorRspanSessionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MirrorRspanSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Session configuration Table of Rspan.When creating an entry,
|
|
the correctness of both the Vlan ID an the Session ID should be ensured.
|
|
When destroying an entry, only the correctness of the Session ID is required."
|
|
::= { primirror 6}
|
|
|
|
--xxx.100.12.6.1
|
|
mirrorRspanSessionEntry OBJECT-TYPE
|
|
SYNTAX MirrorRspanSessionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Session configuration of Rspan."
|
|
INDEX { mirrorRspanSession, mirrorRspanSessionVlan }
|
|
::= { mirrorRspanSessionTable 1 }
|
|
|
|
MirrorRspanSessionEntry
|
|
::= SEQUENCE
|
|
{
|
|
mirrorRspanSession INTEGER,
|
|
mirrorRspanSessionVlan INTEGER,
|
|
mirrorRspanSessionStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.12.6.1.1
|
|
mirrorRspanSession OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Session ID."
|
|
::= { mirrorRspanSessionEntry 1 }
|
|
|
|
--xxx.100.12.6.1.2
|
|
mirrorRspanSessionVlan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Vlan ID."
|
|
::= { mirrorRspanSessionEntry 2 }
|
|
|
|
--xxx.100.12.6.1.3
|
|
mirrorRspanSessionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "The configuration status of the mirror session and its associated Rspan Vlan."
|
|
::= { mirrorRspanSessionEntry 3 }
|
|
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
--xxx.100.13.1
|
|
dhcpRelay OBJECT IDENTIFIER ::= { pridhcp 1 }
|
|
|
|
--xxx.100.13.1.1
|
|
dhcpRelayForwardUdpBootps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bootps(1),
|
|
noBootps(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "if dhcp rely forward bootps udp broadcast packet,broadcast message bootps."
|
|
::= { dhcpRelay 1 }
|
|
|
|
|
|
--xxx.100.13.1.2
|
|
dhcpRelayServerAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpRelayServerAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The role of DHCP Relay Agent is to forward requests
|
|
and replies between server and client when they are not
|
|
in the same subnet. To enable DHCP Relay service user needs to
|
|
specify Relay Server ip address and then restart DHCP Relay.
|
|
This Table is to specify Relay Server ip address,
|
|
the maximum numbers of server ip address user can specify is 5.
|
|
To Restart DHCP Relay, please use the dhcpRelayRestart variable."
|
|
::= { dhcpRelay 2 }
|
|
|
|
--xxx.100.13.1.3.1
|
|
dhcpRelayServerAddrEntry OBJECT-TYPE
|
|
SYNTAX DhcpRelayServerAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A conceptual row of dhcpRelayServerAddrTable."
|
|
INDEX { dhcpRelayServerAddrVlanId , dhcpRelayServerAddrIndex }
|
|
::= { dhcpRelayServerAddrTable 1 }
|
|
|
|
DhcpRelayServerAddrEntry ::= SEQUENCE
|
|
{
|
|
dhcpRelayServerAddrVlanId INTEGER,
|
|
dhcpRelayServerAddrIndex INTEGER,
|
|
dhcpRelayServerAddrServerIp IpAddress,
|
|
dhcpRelayServerAddrStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.13.1.3.1.1
|
|
dhcpRelayServerAddrVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The ID of VLAN interface used by this table entry."
|
|
::= { dhcpRelayServerAddrEntry 1 }
|
|
|
|
--xxx.100.13.1.3.1.2
|
|
dhcpRelayServerAddrIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of relay address set in the VLAN interface."
|
|
::= { dhcpRelayServerAddrEntry 2 }
|
|
|
|
--xxx.100.13.1.3.1.3
|
|
dhcpRelayServerAddrServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Appoint the destination address used for DHCP relay."
|
|
::= { dhcpRelayServerAddrEntry 3 }
|
|
|
|
--xxx.100.13.1.3.1.4
|
|
dhcpRelayServerAddrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Configuration status."
|
|
::= { dhcpRelayServerAddrEntry 4 }
|
|
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.13.2
|
|
dhcpServer OBJECT IDENTIFIER ::= { pridhcp 2 }
|
|
|
|
--xxx.100.13.2.1
|
|
dhcpServerServiceStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to 1 to enable the dhcp server service.
|
|
Setting this to 2 to disable the dhcp server service."
|
|
::= { dhcpServer 1 }
|
|
|
|
--xxx.100.13.2.2
|
|
dhcploggingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this to 1 to enable the dhcp conflict logging.
|
|
Setting this to 0 to disable the dhcp conflict logging."
|
|
::= { dhcpServer 2 }
|
|
--********************************************************************************************************]
|
|
|
|
--xxx.100.13.2.3
|
|
dhcpPool OBJECT IDENTIFIER ::= { dhcpServer 3 }
|
|
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.13.2.3.1
|
|
dhcpPoolTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A dhcp pool is a collection of
|
|
user configuration such as option config-lease time
|
|
or dns-server IPs, a network address for network pool,
|
|
or a host IP plus a hardware address pair for host pool.
|
|
However, a dhcp pool only can either be a network pool
|
|
or a host pool, or none of them (such as that pool only
|
|
containing option config no network address config
|
|
or a host ip config as well)"
|
|
::= { dhcpPool 1 }
|
|
|
|
--xxx.100.13.2.3.1.1
|
|
dhcpPoolEntry OBJECT-TYPE
|
|
SYNTAX DhcpPoolEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A conceptual row of dhcpPoolTable."
|
|
INDEX { dhcpPoolPoolName }
|
|
::= { dhcpPoolTable 1 }
|
|
|
|
DhcpPoolEntry ::= SEQUENCE
|
|
{
|
|
dhcpPoolPoolName DisplayString,
|
|
dhcpPoolStatus INTEGER,
|
|
dhcpPoolAddressType INTEGER,
|
|
dhcpPoolAddress IpAddress,
|
|
dhcpPoolAddressPrefix IpAddress,
|
|
dhcpPoolAddressStatus INTEGER,
|
|
dhcpPoolMacAddress DisplayString,
|
|
dhcpPoolProType INTEGER,
|
|
dhcpPoolMacStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.13.2.3.1.1.1
|
|
dhcpPoolPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PoolName, simply specify a string."
|
|
::= { dhcpPoolEntry 1 }
|
|
|
|
--xxx.100.13.2.3.1.1.2
|
|
dhcpPoolStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "accession delete the pool,according to dhcpPoolName"
|
|
::= { dhcpPoolEntry 2 }
|
|
|
|
--xxx.100.13.2.3.1.1.3
|
|
dhcpPoolAddressType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
network(1),
|
|
host(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "configure dhcppool of address style"
|
|
::= { dhcpPoolEntry 3 }
|
|
|
|
--xxx.100.13.2.3.1.1.4
|
|
dhcpPoolAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "configurate dhcp pool.
|
|
if dhcpPoolAddressType=1 configurate address range,
|
|
if dhcpPoolAddressType=2 configurate single address"
|
|
::= { dhcpPoolEntry 4 }
|
|
|
|
--xxx.100.13.2.3.1.1.5
|
|
dhcpPoolAddressPrefix OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "dhcp pool ip address prefix"
|
|
::= { dhcpPoolEntry 5 }
|
|
|
|
--xxx.100.13.2.3.1.1.6
|
|
dhcpPoolAddressStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "address of configuration satus"
|
|
::= { dhcpPoolEntry 6 }
|
|
|
|
--xxx.100.13.2.3.1.1.7
|
|
dhcpPoolMacAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "appoint user of hardware address.Condition: dhcpPoolAddressType(2)."
|
|
::= { dhcpPoolEntry 7 }
|
|
|
|
--xxx.100.13.2.3.1.1.8
|
|
dhcpPoolProType OBJECT-TYPE
|
|
SYNTAX INTEGER(1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "RFC define protocol style of number express,Condition:dhcpPoolAddressType(2)."
|
|
::= { dhcpPoolEntry 8 }
|
|
|
|
--xxx.100.13.2.3.1.1.9
|
|
dhcpPoolMacStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "hardware address configure status.Condition: dhcpPoolAddressType(2)."
|
|
::= { dhcpPoolEntry 9 }
|
|
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.13.2.3.2
|
|
dhcpPoolExpandTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpPoolExpandEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A dhcp pool is a collection of
|
|
user configuration such as option config-lease time
|
|
or dns-server IPs, a network address for network pool,
|
|
or a host IP plus a hardware address pair for host pool.
|
|
However, a dhcp pool only can either be a network pool
|
|
or a host pool, or none of them (such as that pool only
|
|
containing option config no network address config
|
|
or a host ip config as well)"
|
|
::= { dhcpPool 2 }
|
|
|
|
--xxx.100.13.2.3.2.1
|
|
dhcpPoolExpandEntry OBJECT-TYPE
|
|
SYNTAX DhcpPoolExpandEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A conceptual row of dhcpPoolExpandTable."
|
|
INDEX { dhcpPoolExpandName }
|
|
::= { dhcpPoolExpandTable 1 }
|
|
|
|
DhcpPoolExpandEntry ::= SEQUENCE
|
|
{
|
|
dhcpPoolExpandName DisplayString,
|
|
dhcpPoolNetbiosNodeType INTEGER,
|
|
dhcpPoolDomainName DisplayString,
|
|
dhcpPoolBootFile DisplayString,
|
|
dhcpPoolCLid DisplayString,
|
|
dhcpPoolCLname DisplayString,
|
|
dhcpPoolExpandstatus INTEGER
|
|
}
|
|
|
|
--xxx.100.13.2.3.2.1.1
|
|
dhcpPoolExpandName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PoolName, simply specify a string which
|
|
string size NO MORE THAN 8"
|
|
::= { dhcpPoolExpandEntry 1 }
|
|
|
|
|
|
--xxx.100.13.2.3.2.1.2
|
|
dhcpPoolNetbiosNodeType OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Configure DHCP client of node style.
|
|
For example, Broadcast node 1, Peer-to-peer node 2, Mixed node 4, Hybrid node 8"
|
|
::= { dhcpPoolExpandEntry 2 }
|
|
|
|
--xxx.100.13.2.3.2.1.3
|
|
dhcpPoolDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "DHCP client configure domain name"
|
|
::= { dhcpPoolExpandEntry 3 }
|
|
|
|
--xxx.100.13.2.3.2.1.4
|
|
dhcpPoolBootFile OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "configure DHCP client boot-file name"
|
|
::= { dhcpPoolExpandEntry 4 }
|
|
|
|
--xxx.100.13.2.3.2.1.5
|
|
dhcpPoolCLid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "set dhcp pool client id.
|
|
Condition: the pool of address is handcraft bind"
|
|
::= { dhcpPoolExpandEntry 5 }
|
|
|
|
--xxx.100.13.2.3.2.1.6
|
|
dhcpPoolCLname OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "configure user name.
|
|
Condition: the pool address is handcraft bind."
|
|
::= { dhcpPoolExpandEntry 6 }
|
|
|
|
--xxx.100.13.2.3.2.1.7
|
|
dhcpPoolExpandstatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
valid(0),
|
|
destroy(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "if configure is valid(0),and the list of all configuration operatation accession
|
|
if configure is destroy(1),and the list of all configuration operation delet"
|
|
::= { dhcpPoolExpandEntry 7 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.13.2.3.2.1.2
|
|
dhcpLeaseTimeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpLeaseTimeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "configure rent term in address pool"
|
|
::= { dhcpServer 4 }
|
|
|
|
--xxx.100.13.2.4.1
|
|
dhcpLeaseTimeEntry OBJECT-TYPE
|
|
SYNTAX DhcpLeaseTimeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "configure rent term in address pool"
|
|
INDEX { dhcpLeaseTimePoolName }
|
|
::= { dhcpLeaseTimeTable 1 }
|
|
|
|
DhcpLeaseTimeEntry ::= SEQUENCE
|
|
{
|
|
dhcpLeaseTimePoolName DisplayString,
|
|
dhcpLeaseTimeType INTEGER,
|
|
dhcpLeaseTimeDay INTEGER,
|
|
dhcpLeaseTimeHours INTEGER,
|
|
dhcpLeaseTimeMinutes INTEGER,
|
|
dhcpLeaseTimeStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.13.2.4.1.1
|
|
dhcpLeaseTimePoolName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PoolName, simply specify a string which
|
|
string size NO MORE THAN 8"
|
|
::= { dhcpLeaseTimeEntry 1 }
|
|
|
|
--xxx.100.13.2.4.1.2
|
|
dhcpLeaseTimeType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
temp(0),
|
|
infinite(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "rent time style,0 is temporarily rent,1 is forever rent"
|
|
::= { dhcpLeaseTimeEntry 2 }
|
|
|
|
--xxx.100.13.2.4.1.3
|
|
dhcpLeaseTimeDay OBJECT-TYPE
|
|
SYNTAX INTEGER(0..365)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "day,condition:dhcpLeaseTimeType=temp(0)."
|
|
::= { dhcpLeaseTimeEntry 3 }
|
|
|
|
--xxx.100.13.2.4.1.4
|
|
dhcpLeaseTimeHours OBJECT-TYPE
|
|
SYNTAX INTEGER(0..23)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "hour,condition:dhcpLeaseTimeType=temp(0)."
|
|
::= { dhcpLeaseTimeEntry 4 }
|
|
|
|
--xxx.100.13.2.4.1.5
|
|
dhcpLeaseTimeMinutes OBJECT-TYPE
|
|
SYNTAX INTEGER(0..59)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "hour,condition:dhcpLeaseTimeType=temp(0)."
|
|
::= { dhcpLeaseTimeEntry 5 }
|
|
|
|
--xxx.100.13.2.4.1.6A
|
|
dhcpLeaseTimeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Setting this to active(1) creates an entry.
|
|
Setting this to destroy(2) destroys an entry.
|
|
default status is 0,no opperation"
|
|
::= { dhcpLeaseTimeEntry 6 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.13.2.5
|
|
dhcpPoolOptionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpPoolOptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "configure pool of optional parameters"
|
|
::= { dhcpServer 5 }
|
|
|
|
--xxx.100.13.2.5.1
|
|
dhcpPoolOptionEntry OBJECT-TYPE
|
|
SYNTAX DhcpPoolOptionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "configure pool of optional parameters"
|
|
INDEX { dhcpPoolOptionName, dhcpPoolOptionIndex }
|
|
::= { dhcpPoolOptionTable 1 }
|
|
|
|
DhcpPoolOptionEntry ::= SEQUENCE
|
|
{
|
|
dhcpPoolOptionName DisplayString,
|
|
dhcpPoolOptionIndex INTEGER,
|
|
dhcpPoolOptionId INTEGER,
|
|
dhcpPoolOptionType INTEGER,
|
|
dhcpPoolOption DisplayString,
|
|
dhcpPoolOptionStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.13.2.5.1.1
|
|
dhcpPoolOptionName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PoolName, simply specify a string which
|
|
string size NO MORE THAN 8"
|
|
::= { dhcpPoolOptionEntry 1 }
|
|
|
|
--xxx.100.13.2.5.1.2
|
|
dhcpPoolOptionIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of option which has been set in this pool"
|
|
::= { dhcpPoolOptionEntry 2 }
|
|
|
|
--xxx.100.13.2.5.1.3
|
|
dhcpPoolOptionId OBJECT-TYPE
|
|
SYNTAX INTEGER(0..254)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "dhcpPoolOptionId (0..254)"
|
|
::= { dhcpPoolOptionEntry 3 }
|
|
|
|
--xxx.100.13.2.5.1.4
|
|
dhcpPoolOptionType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ascii(1),
|
|
hex(2),
|
|
ipaddress(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "dhcpPoolOptionType"
|
|
::= { dhcpPoolOptionEntry 4 }
|
|
|
|
--xxx.100.13.2.5.1.5
|
|
dhcpPoolOption OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "
|
|
if dhcpPoolOptionType=1, ASCII string
|
|
if dhcpPoolOptionType=2, HEX string
|
|
if dhcpPoolOptionType=3,IP address"
|
|
::= { dhcpPoolOptionEntry 5 }
|
|
|
|
--xxx.100.13.2.5.1.6
|
|
dhcpPoolOptionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "optional parameters configure status"
|
|
::= { dhcpPoolOptionEntry 6 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.13.2.6
|
|
dhcpServerExcludedIpAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpServerExcludedIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "dhcpServer Excluded IpAddr Table"
|
|
::= { dhcpServer 6 }
|
|
|
|
--xxx.100.13.2.6.1
|
|
dhcpServerExcludedIpAddrEntry OBJECT-TYPE
|
|
SYNTAX DhcpServerExcludedIpAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "dhcpServer Excluded IpAddrEntry"
|
|
INDEX { dhcpServerExcludedIpAddrLowIp , dhcpServerExcludedIpAddrHiIp }
|
|
::= { dhcpServerExcludedIpAddrTable 1 }
|
|
|
|
DhcpServerExcludedIpAddrEntry ::= SEQUENCE
|
|
{
|
|
dhcpServerExcludedIpAddrLowIp IpAddress,
|
|
dhcpServerExcludedIpAddrHiIp IpAddress,
|
|
dhcpServerExcludedIpAddrStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.13.2.6.2
|
|
dhcpServerExcludedIpAddrLowIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The excluded IP address,
|
|
or first IP address in an excluded address range."
|
|
::= { dhcpServerExcludedIpAddrEntry 1 }
|
|
|
|
--xxx.100.13.2.6.3
|
|
dhcpServerExcludedIpAddrHiIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The last IP address in the excluded address range."
|
|
::= { dhcpServerExcludedIpAddrEntry 2 }
|
|
|
|
--xxx.100.13.2.6.4
|
|
dhcpServerExcludedIpAddrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Setting this to active(1) creates an entry.
|
|
Setting this to destroy(2) destroys an entry."
|
|
::= { dhcpServerExcludedIpAddrEntry 3 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.13.2.8
|
|
dhcpPoolDnsSerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpPoolDnsSerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION " dhcpPool Dns Server Table:the maximum 8 dns is allowed
|
|
the first dns server has the highest priority.so address1 is highest priority,next is address2,address3..."
|
|
::= { dhcpServer 8 }
|
|
|
|
--xxx.100.13.2.8.1
|
|
dhcpPoolDnsSerEntry OBJECT-TYPE
|
|
SYNTAX DhcpPoolDnsSerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "is DHCP client configure DNS server"
|
|
INDEX { dhcpPoolDnsSerPoolName }
|
|
::= { dhcpPoolDnsSerTable 1 }
|
|
|
|
DhcpPoolDnsSerEntry ::= SEQUENCE
|
|
{
|
|
dhcpPoolDnsSerPoolName DisplayString,
|
|
dhcpPoolDnsSerIpAddress1 IpAddress,
|
|
dhcpPoolDnsSerIpAddress2 IpAddress,
|
|
dhcpPoolDnsSerIpAddress3 IpAddress,
|
|
dhcpPoolDnsSerIpAddress4 IpAddress,
|
|
dhcpPoolDnsSerIpAddress5 IpAddress,
|
|
dhcpPoolDnsSerIpAddress6 IpAddress,
|
|
dhcpPoolDnsSerIpAddress7 IpAddress,
|
|
dhcpPoolDnsSerIpAddress8 IpAddress,
|
|
dhcpPoolDnsSerStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.13.2.8.1
|
|
dhcpPoolDnsSerPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PoolName, simply specify a string which
|
|
string size NO MORE THAN 8"
|
|
::= { dhcpPoolDnsSerEntry 1 }
|
|
|
|
--xxx.100.13.2.8.2
|
|
dhcpPoolDnsSerIpAddress1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,MUST."
|
|
::= { dhcpPoolDnsSerEntry 2 }
|
|
|
|
--xxx.100.13.2.8.3
|
|
dhcpPoolDnsSerIpAddress2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDnsSerEntry 3 }
|
|
|
|
--xxx.100.13.2.8.4
|
|
dhcpPoolDnsSerIpAddress3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDnsSerEntry 4 }
|
|
|
|
--xxx.100.13.2.8.5
|
|
dhcpPoolDnsSerIpAddress4 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDnsSerEntry 5 }
|
|
|
|
--xxx.100.13.2.8.6
|
|
dhcpPoolDnsSerIpAddress5 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDnsSerEntry 6 }
|
|
|
|
--xxx.100.13.2.8.7
|
|
dhcpPoolDnsSerIpAddress6 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDnsSerEntry 7 }
|
|
|
|
--xxx.100.13.2.8.8
|
|
dhcpPoolDnsSerIpAddress7 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDnsSerEntry 8 }
|
|
|
|
--xxx.100.13.2.8.9
|
|
dhcpPoolDnsSerIpAddress8 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDnsSerEntry 9 }
|
|
|
|
--xxx.100.13.2.8.10
|
|
dhcpPoolDnsSerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "configure DNS server status"
|
|
::= { dhcpPoolDnsSerEntry 10 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
|
|
--xxx.100.13.2.9
|
|
dhcpPoolDefaultRouterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpPoolDefaultRouterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "dhcpPoolDefaultRouterTable:
|
|
the maximum 8 default gateway address can be set,the first gateway has the highest priority,
|
|
So address1 has the highest priority,next is address2,address3..."
|
|
::= { dhcpServer 9 }
|
|
|
|
--xxx.100.13.2.9.1
|
|
dhcpPoolDefaultRouterEntry OBJECT-TYPE
|
|
SYNTAX DhcpPoolDefaultRouterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "DHCP client machine configure default gateway"
|
|
INDEX { dhcpPoolDnsSerPoolName }
|
|
::= { dhcpPoolDefaultRouterTable 1 }
|
|
|
|
DhcpPoolDefaultRouterEntry ::= SEQUENCE
|
|
{
|
|
dhcpPoolDefaultRouterPoolName DisplayString,
|
|
dhcpPoolDefaultRouterIpAddress1 IpAddress,
|
|
dhcpPoolDefaultRouterIpAddress2 IpAddress,
|
|
dhcpPoolDefaultRouterIpAddress3 IpAddress,
|
|
dhcpPoolDefaultRouterIpAddress4 IpAddress,
|
|
dhcpPoolDefaultRouterIpAddress5 IpAddress,
|
|
dhcpPoolDefaultRouterIpAddress6 IpAddress,
|
|
dhcpPoolDefaultRouterIpAddress7 IpAddress,
|
|
dhcpPoolDefaultRouterIpAddress8 IpAddress,
|
|
dhcpPoolDefaultRouterStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.13.2.9.1
|
|
dhcpPoolDefaultRouterPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PoolName, simply specify a string which
|
|
string size NO MORE THAN 8"
|
|
::= { dhcpPoolDefaultRouterEntry 1 }
|
|
|
|
--xxx.100.13.2.9.2
|
|
dhcpPoolDefaultRouterIpAddress1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,must"
|
|
::= { dhcpPoolDefaultRouterEntry 2 }
|
|
|
|
--xxx.100.13.2.9.3
|
|
dhcpPoolDefaultRouterIpAddress2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDefaultRouterEntry 3 }
|
|
|
|
--xxx.100.13.2.9.4
|
|
dhcpPoolDefaultRouterIpAddress3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDefaultRouterEntry 4 }
|
|
|
|
--xxx.100.13.2.9.5
|
|
dhcpPoolDefaultRouterIpAddress4 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDefaultRouterEntry 5 }
|
|
|
|
--xxx.100.13.2.9.6
|
|
dhcpPoolDefaultRouterIpAddress5 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDefaultRouterEntry 6 }
|
|
|
|
--xxx.100.13.2.9.7
|
|
dhcpPoolDefaultRouterIpAddress6 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDefaultRouterEntry 7 }
|
|
|
|
--xxx.100.13.2.8.8
|
|
dhcpPoolDefaultRouterIpAddress7 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDefaultRouterEntry 8 }
|
|
|
|
--xxx.100.13.2.9.9
|
|
dhcpPoolDefaultRouterIpAddress8 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolDefaultRouterEntry 9 }
|
|
|
|
--xxx.100.13.2.9.10
|
|
dhcpPoolDefaultRouterStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "configure default gateway state machine"
|
|
::= { dhcpPoolDefaultRouterEntry 10 }
|
|
--********************************************************************************************************
|
|
|
|
|
|
--xxx.100.13.2.10
|
|
dhcpPoolNextServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpPoolNextServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "dhcpPoolNextServerTable"
|
|
::= { dhcpServer 10 }
|
|
|
|
--xxx.100.13.2.10.1
|
|
dhcpPoolNextServerEntry OBJECT-TYPE
|
|
SYNTAX DhcpPoolNextServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "dhcpPoolNextServerEntry"
|
|
INDEX { dhcpPoolNextServerPoolName }
|
|
::= { dhcpPoolNextServerTable 1 }
|
|
|
|
DhcpPoolNextServerEntry ::= SEQUENCE
|
|
{
|
|
dhcpPoolNextServerPoolName DisplayString,
|
|
dhcpPoolNextServerIpAddress1 IpAddress,
|
|
dhcpPoolNextServerIpAddress2 IpAddress,
|
|
dhcpPoolNextServerIpAddress3 IpAddress,
|
|
dhcpPoolNextServerIpAddress4 IpAddress,
|
|
dhcpPoolNextServerIpAddress5 IpAddress,
|
|
dhcpPoolNextServerIpAddress6 IpAddress,
|
|
dhcpPoolNextServerIpAddress7 IpAddress,
|
|
dhcpPoolNextServerIpAddress8 IpAddress,
|
|
dhcpPoolNextServerStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.13.2.10.1
|
|
dhcpPoolNextServerPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PoolName, simply specify a string which
|
|
string size NO MORE THAN 8"
|
|
::= { dhcpPoolNextServerEntry 1 }
|
|
|
|
--xxx.100.13.2.10.2
|
|
dhcpPoolNextServerIpAddress1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,must"
|
|
::= { dhcpPoolNextServerEntry 2 }
|
|
|
|
--xxx.100.13.2.10.3
|
|
dhcpPoolNextServerIpAddress2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolNextServerEntry 3 }
|
|
|
|
--xxx.100.13.2.10.4
|
|
dhcpPoolNextServerIpAddress3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolNextServerEntry 4 }
|
|
|
|
--xxx.100.13.2.10.5
|
|
dhcpPoolNextServerIpAddress4 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolNextServerEntry 5 }
|
|
|
|
--xxx.100.13.2.10.6
|
|
dhcpPoolNextServerIpAddress5 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolNextServerEntry 6 }
|
|
|
|
--xxx.100.13.2.10.7
|
|
dhcpPoolNextServerIpAddress6 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolNextServerEntry 7 }
|
|
|
|
--xxx.100.13.2.10.8
|
|
dhcpPoolNextServerIpAddress7 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolNextServerEntry 8 }
|
|
|
|
--xxx.100.13.2.10.9
|
|
dhcpPoolNextServerIpAddress8 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolNextServerEntry 9 }
|
|
|
|
--xxx.100.13.2.10.10
|
|
dhcpPoolNextServerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "status machine"
|
|
::= { dhcpPoolNextServerEntry 10 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.13.2.11
|
|
dhcpPoolWinsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpPoolWinsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "dhcpPoolWinsTable"
|
|
::= { dhcpServer 11 }
|
|
|
|
--xxx.100.13.2.11.1
|
|
dhcpPoolWinsEntry OBJECT-TYPE
|
|
SYNTAX DhcpPoolWinsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "configure Wins sever address"
|
|
INDEX { dhcpPoolDnsSerPoolName }
|
|
::= { dhcpPoolWinsTable 1 }
|
|
|
|
DhcpPoolWinsEntry ::= SEQUENCE
|
|
{
|
|
dhcpPoolWinsPoolName DisplayString,
|
|
dhcpPoolWinsIpAddress1 IpAddress,
|
|
dhcpPoolWinsIpAddress2 IpAddress,
|
|
dhcpPoolWinsIpAddress3 IpAddress,
|
|
dhcpPoolWinsIpAddress4 IpAddress,
|
|
dhcpPoolWinsIpAddress5 IpAddress,
|
|
dhcpPoolWinsIpAddress6 IpAddress,
|
|
dhcpPoolWinsIpAddress7 IpAddress,
|
|
dhcpPoolWinsIpAddress8 IpAddress,
|
|
dhcpPoolWinsStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.13.2.11.1
|
|
dhcpPoolWinsPoolName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "PoolName, simply specify a string which
|
|
string size NO MORE THAN 8"
|
|
::= { dhcpPoolWinsEntry 1 }
|
|
|
|
--xxx.100.13.2.11.2
|
|
dhcpPoolWinsIpAddress1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,must"
|
|
::= { dhcpPoolWinsEntry 2 }
|
|
|
|
--xxx.100.13.2.11.3
|
|
dhcpPoolWinsIpAddress2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolWinsEntry 3 }
|
|
|
|
--xxx.100.13.2.11.4
|
|
dhcpPoolWinsIpAddress3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IPaddress,option"
|
|
::= { dhcpPoolWinsEntry 4 }
|
|
|
|
--xxx.100.13.2.11.5
|
|
dhcpPoolWinsIpAddress4 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolWinsEntry 5 }
|
|
|
|
--xxx.100.13.2.11.6
|
|
dhcpPoolWinsIpAddress5 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolWinsEntry 6 }
|
|
|
|
--xxx.100.13.2.11.7
|
|
dhcpPoolWinsIpAddress6 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolWinsEntry 7 }
|
|
|
|
--xxx.100.13.2.11.8
|
|
dhcpPoolWinsIpAddress7 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolWinsEntry 8 }
|
|
|
|
--xxx.100.13.2.11.9
|
|
dhcpPoolWinsIpAddress8 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "IP address,option"
|
|
::= { dhcpPoolWinsEntry 9 }
|
|
|
|
--xxx.100.13.2.11.10
|
|
dhcpPoolWinsStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "configure wins server status machine"
|
|
::= { dhcpPoolWinsEntry 10 }
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.13.2.12
|
|
dhcpServerLeaseBindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DhcpServerLeaseBindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "express IP address and MAC address bind status"
|
|
::= { dhcpServer 12 }
|
|
|
|
--xxx.100.13.2.12.1
|
|
dhcpServerLeaseBindingEntry OBJECT-TYPE
|
|
SYNTAX DhcpServerLeaseBindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "express IP address and MAC address bind status"
|
|
INDEX { dhcpServerLeaseBindingIp, dhcpServerLeaseBindingType }
|
|
::= { dhcpServerLeaseBindingTable 1 }
|
|
|
|
DhcpServerLeaseBindingEntry ::= SEQUENCE
|
|
{
|
|
dhcpServerLeaseBindingIp IpAddress,
|
|
dhcpServerLeaseBindingType INTEGER,
|
|
dhcpServerLeaseBindingMac DisplayString,
|
|
dhcpServerLeaseBindingLeaseTime INTEGER
|
|
}
|
|
|
|
--xxx.100.13.2.12.1.1
|
|
dhcpServerLeaseBindingIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "certain address appointed, format is x.x.x.x"
|
|
::= { dhcpServerLeaseBindingEntry 1 }
|
|
|
|
|
|
--xxx.100.13.2.12.1.2
|
|
dhcpServerLeaseBindingType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
manual(1),
|
|
dynamic(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "manual express handcraft bind style;dynamic express dynamic distribution style"
|
|
::= { dhcpServerLeaseBindingEntry 2 }
|
|
|
|
--xxx.100.13.2.12.1.3
|
|
dhcpServerLeaseBindingMac OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "MAC address"
|
|
::= { dhcpServerLeaseBindingEntry 3 }
|
|
|
|
--xxx.100.13.2.12.1.4
|
|
dhcpServerLeaseBindingLeaseTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "rent term"
|
|
::= { dhcpServerLeaseBindingEntry 4 }
|
|
--********************************************************************************************************
|
|
--portGroupMgt
|
|
--xxx.100.14.1
|
|
systemPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Modify the system priority which is used by port group."
|
|
::= { priportGroup 1 }
|
|
|
|
--xxx.100.14.2
|
|
portGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains port group information associated
|
|
with the local system known to this agent."
|
|
::= { priportGroup 2 }
|
|
|
|
--xxx.100.14.2.1
|
|
portGroupEntry OBJECT-TYPE
|
|
SYNTAX PortGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the port group information."
|
|
INDEX { portGroupIndex }
|
|
::= { portGroupTable 1 }
|
|
|
|
PortGroupEntry ::= SEQUENCE {
|
|
portGroupIndex INTEGER,
|
|
portGroupMemberCount INTEGER,
|
|
loadBalance INTEGER,
|
|
portGroupInfo DisplayString
|
|
}
|
|
|
|
--xxx.100.14.2.1.1
|
|
portGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port group number."
|
|
::= { portGroupEntry 1 }
|
|
|
|
--xxx.100.14.2.1.2
|
|
portGroupMemberCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of port group member."
|
|
::= { portGroupEntry 2 }
|
|
|
|
--xxx.100.14.2.1.3
|
|
loadBalance OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dst-src-mac(1),
|
|
dst-src-ip(2),
|
|
src-mac(3),
|
|
dst-mac(4),
|
|
src-ip(5),
|
|
dst-ip(6),
|
|
dst-src-mac-ip(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Load balancing method:
|
|
dst-src-mac(1):destination and source mac address;
|
|
dst-src-ip(2):destination and source ip address;
|
|
src-mac(3):source mac address;
|
|
dst-mac(4):destination mac address;
|
|
src-ip(5):source ip address;
|
|
dst-ip(6):destination ip address;
|
|
dst-src-mac-ip(7):destination and source mac address, ip address.
|
|
If there is no member in the port group, the value is -1.
|
|
If you set value to the load balance method that your switch is not unsupported, it will return error.
|
|
Please see the handbook and make sure that the load balance method is supported by your switch."
|
|
::= { portGroupEntry 3 }
|
|
|
|
--xxx.100.14.2.1.4
|
|
portGroupInfo OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port group brief information. Format is ID, Mode, Partner ID, Ports and Load-balance.
|
|
If there is no member in the port group, the value is empty."
|
|
::= { portGroupEntry 4 }
|
|
|
|
--xxx.100.14.3
|
|
portGroupPortListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortGroupPortListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains port group member information associated
|
|
with the local system known to this agent."
|
|
::= { priportGroup 3 }
|
|
|
|
--xxx.100.14.3.1
|
|
portGroupPortListEntry OBJECT-TYPE
|
|
SYNTAX PortGroupPortListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the port group member information."
|
|
INDEX { portGroupIndex, portGroupMemberIndex}
|
|
::= { portGroupPortListTable 1 }
|
|
|
|
PortGroupPortListEntry ::= SEQUENCE {
|
|
portGroupMemberIndex INTEGER,
|
|
portGroupMemberName DisplayString,
|
|
portGroupMemberMode INTEGER,
|
|
portGroupMemberPriority INTEGER,
|
|
portGroupMemberTimeout INTEGER,
|
|
portGroupMemberStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.14.3.1.1
|
|
portGroupMemberIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port group member index. Format is group number and port index of member."
|
|
::= { portGroupPortListEntry 1 }
|
|
|
|
--xxx.100.14.3.1.2
|
|
portGroupMemberName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of port group member."
|
|
::= { portGroupPortListEntry 2 }
|
|
|
|
--xxx.100.14.3.1.3
|
|
portGroupMemberMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
on(1),
|
|
active(2),
|
|
passive(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mode of port group member."
|
|
::= { portGroupPortListEntry 3 }
|
|
|
|
--xxx.100.14.3.1.4
|
|
portGroupMemberPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port priority of port group member. If the port group mode is on, the value is -1."
|
|
::= { portGroupPortListEntry 4 }
|
|
|
|
--xxx.100.14.3.1.5
|
|
portGroupMemberTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
long(0),
|
|
short(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timeout mode of port group member. If the port group mode is on, the value is -1."
|
|
::= { portGroupPortListEntry 5 }
|
|
|
|
--xxx.100.14.3.1.6
|
|
portGroupMemberStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unselected(1),
|
|
standby(2),
|
|
selected(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of port group member. If the port group mode is on, the value is -1."
|
|
::= { portGroupPortListEntry 6 }
|
|
|
|
--********************************************************************************************************
|
|
--snmpMgt
|
|
--xxx.100.15.1
|
|
snmpSecurityIpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable secure IP address check function on the NMS."
|
|
::= { prisnmpMgt 1 }
|
|
|
|
--xxx.100.15.2
|
|
snmpTrapHostStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the switch to send Trap message.
|
|
This command is used for SNMP v1/v2."
|
|
::= { prisnmpMgt 2 }
|
|
|
|
--xxx.100.15.3
|
|
snmpRmonStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable/disable RMON."
|
|
::= { prisnmpMgt 3 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.15.4
|
|
securityIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SecurityIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of snmp securityIp entries."
|
|
::= { prisnmpMgt 4 }
|
|
|
|
--xxx.100.15.4.1
|
|
securityIpEntry OBJECT-TYPE
|
|
SYNTAX SecurityIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure the secure IP address which is
|
|
allowed to access the switch on the NMS;"
|
|
INDEX { securityIpIndex }
|
|
::= { securityIpTable 1 }
|
|
|
|
--xxx.100.15.4.1.1
|
|
SecurityIpEntry ::= SEQUENCE {
|
|
securityIpIndex INTEGER,
|
|
securityIpAddress IpAddress,
|
|
securityIpStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.15.4.1.1.2
|
|
securityIpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index."
|
|
::= { securityIpEntry 1 }
|
|
|
|
--xxx.100.15.4.1.1.2
|
|
securityIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of security."
|
|
::= { securityIpEntry 2 }
|
|
|
|
--xxx.100.15.4.1.1.3
|
|
securityIpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Writing this to active(1) creates an entry.
|
|
Writing this to destroy(2) destroys an entry."
|
|
::= { securityIpEntry 3 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
|
|
--xxx.100.15.5
|
|
trapDestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TrapDestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of trap destination entries."
|
|
::= { prisnmpMgt 5 }
|
|
|
|
--xxx.100.15.5.1
|
|
trapDestEntry OBJECT-TYPE
|
|
SYNTAX TrapDestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry includes a destination IP address to which to send
|
|
traps for this community."
|
|
INDEX { trapDestIndex }
|
|
::= { trapDestTable 1 }
|
|
|
|
--xxx.100.15.5.1.1
|
|
TrapDestEntry ::= SEQUENCE {
|
|
trapDestIndex INTEGER,
|
|
trapDestAddress IpAddress,
|
|
trapDestVersion INTEGER,
|
|
trapDestCommunity DisplayString,
|
|
trapDestStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.15.5.1.1.2
|
|
trapDestIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index"
|
|
::= { trapDestEntry 1 }
|
|
|
|
--xxx.100.15.5.1.1.2
|
|
trapDestAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address to send traps."
|
|
::= { trapDestEntry 2 }
|
|
|
|
--xxx.100.15.5.1.1.3
|
|
trapDestVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
version1(0),
|
|
version2(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variables represent the version of the Trap we wish to send to trap Receiver.
|
|
If the value is 0, mean we wish to send Version 1 trap. If the value is 1,
|
|
mean we wish to send version 2 trap. "
|
|
::= { trapDestEntry 3}
|
|
|
|
--xxx.100.15.5.1.1.4
|
|
trapDestCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(1..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A community to which this destination address belongs."
|
|
::= { trapDestEntry 4 }
|
|
|
|
--xxx.100.15.5.1.1.5
|
|
trapDestStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Writing this to active(1) creates an entry.
|
|
Writing this to destroy(2) destroys an entry."
|
|
::= { trapDestEntry 5 }
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.16.1
|
|
arpMgt OBJECT IDENTIFIER ::= { l3 1 }
|
|
--xxx.100.16.2
|
|
routeMgt OBJECT IDENTIFIER ::= { l3 2 }
|
|
--xxx.100.16.1.1
|
|
arpCacheDeleteAll OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
delete(1), -- trigger clear all arp cache
|
|
noDelete(0)-- when then snmp agent read this node, the value is meaningless
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"when set , triger flush arp-cache, when get ,nosense"
|
|
::= { arpMgt 1 }
|
|
|
|
--xxx.100.16.1.2
|
|
arpCacheTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"arp cache timeout time"
|
|
::= { arpMgt 2 }
|
|
--xxx.100.16.1.3
|
|
arpSecurityUpdateProtectALL OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"global enable or disable arp security update protect"
|
|
::= { arpMgt 3 }
|
|
|
|
--xxx.100.16.1.4
|
|
arpSecurityLearnProtectALL OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"global enable or disable arp security learn protect"
|
|
::= { arpMgt 4 }
|
|
--xxx.100.16.1.5
|
|
arpSecurityConvertALL OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"global convert dynamic arp-cache to static arp item .enable mean convert"
|
|
::= { arpMgt 5 }
|
|
|
|
|
|
--xxx.100.16.1.6
|
|
arpSecurityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArpsecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"arp security table"
|
|
::= { arpMgt 6}
|
|
|
|
--xxx.100.16.1.6.1
|
|
arpsecurityEntry OBJECT-TYPE
|
|
SYNTAX ArpsecurityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" index is L3 interface index"
|
|
INDEX { arpSecurityIfindex}
|
|
::= { arpSecurityTable 1 }
|
|
|
|
ArpsecurityEntry
|
|
::= SEQUENCE
|
|
{
|
|
arpSecurityIfindex INTEGER,
|
|
arpSecurityUpdateProtect INTEGER,
|
|
arpSecurityLearnProtect INTEGER,
|
|
arpSecurityConvert INTEGER
|
|
}
|
|
|
|
--xxx.100.16.1.6.1.1
|
|
arpSecurityIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"L3 interface index"
|
|
::= { arpsecurityEntry 1 }
|
|
|
|
--xxx.100.16.1.6.1.2
|
|
arpSecurityUpdateProtect OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"enable or disable arp security update protect on the current port"
|
|
::= { arpsecurityEntry 2 }
|
|
|
|
--xxx.100.16.1.6.1.3
|
|
arpSecurityLearnProtect OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"enable or disable arp security learn protect on the current port"
|
|
::= { arpsecurityEntry 3 }
|
|
--xxx.100.16.1.6.1.4
|
|
arpSecurityConvert OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "convert dynamic arp-cache to static arp item on the port.enable mean convert,get OPS is nosense"
|
|
::= { arpsecurityEntry 4 }
|
|
|
|
|
|
|
|
--xxx.100.16.1.7
|
|
arpProxyArpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArpProxyArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" configure arp proxy list"
|
|
::= { arpMgt 7}
|
|
|
|
--xxx.100.16.1.7.1
|
|
arpProxyArpEntry OBJECT-TYPE
|
|
SYNTAX ArpProxyArpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" index is L3 interface index"
|
|
INDEX { arpProxyArpIfIndex}
|
|
::= { arpProxyArpTable 1 }
|
|
|
|
ArpProxyArpEntry
|
|
::= SEQUENCE
|
|
{
|
|
arpProxyArpIfIndex INTEGER,
|
|
arpProxyArpStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.16.1.7.1.1
|
|
arpProxyArpIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" L3 interface index"
|
|
::= { arpProxyArpEntry 1 }
|
|
|
|
--xxx.100.16.1.7.1.2
|
|
arpProxyArpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "arp proxy enable"
|
|
::= { arpProxyArpEntry 2 }
|
|
|
|
|
|
--xxx.100.16.1.7
|
|
arpStacticTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ArpStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" static state arp configuration list"
|
|
::= { arpMgt 8}
|
|
|
|
--xxx.100.16.1.8.1
|
|
arpStaticEntry OBJECT-TYPE
|
|
SYNTAX ArpStaticEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" index is 'arpProxyArpIfIndex.arpStaticIpaddress'."
|
|
INDEX { arpProxyArpIfIndex,arpStaticIpaddress}
|
|
::= { arpStacticTable 1 }
|
|
|
|
ArpStaticEntry
|
|
::= SEQUENCE
|
|
{
|
|
arpStaticIfindex INTEGER,
|
|
arpStaticIpaddress IpAddress,
|
|
arpStaticMac MacAddress,
|
|
arpStaticPortIndex INTEGER,
|
|
arpStaticStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.16.1.8.1.1
|
|
arpStaticIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" L3 interface index"
|
|
::= { arpStaticEntry 1 }
|
|
|
|
--xxx.100.16.1.8.1.2
|
|
arpStaticIpaddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "ip address"
|
|
::= { arpStaticEntry 2 }
|
|
--xxx.100.16.1.8.1.3
|
|
arpStaticMac OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" the Mac address of the arp item"
|
|
::= { arpStaticEntry 3 }
|
|
|
|
--xxx.100.16.1.8.1.4
|
|
arpStaticPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "the port index of the arp item"
|
|
::= { arpStaticEntry 4 }
|
|
--xxx.100.16.1.8.1.5
|
|
arpStaticStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
valid(1),--create one arp entry , stand for this arp entry is valid
|
|
invalid(2), --destory one arp entry , stand for this arp entry is invalid
|
|
waitingforset(3) -- this is the default status
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"valid(1),this is a active arp when get/getnext; when set,mean create the static arp item
|
|
invalid(2); when set, mean destory the current arp item
|
|
waitingforset(3); reserved"
|
|
::= { arpStaticEntry 5 }
|
|
|
|
|
|
|
|
--xxx.100.16.2.1
|
|
ipStaticRouteExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpStaticRouteExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" static route configuration list"
|
|
::= { routeMgt 1}
|
|
|
|
--xxx.100.16.2.1.1
|
|
ipStaticRouteExtEntry OBJECT-TYPE
|
|
SYNTAX IpStaticRouteExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is ip.mask"
|
|
INDEX { ipStaticRouteExtDest,ipStaticRouteExtMask }
|
|
::= { ipStaticRouteExtTable 1 }
|
|
|
|
IpStaticRouteExtEntry
|
|
::= SEQUENCE
|
|
{
|
|
ipStaticRouteExtDest IpAddress,
|
|
ipStaticRouteExtMask IpAddress,
|
|
ipStaticRouteExtNextHop IpAddress,
|
|
ipStaticRouteExtMetric INTEGER,
|
|
ipStaticRouteExtStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.16.2.1.1.1
|
|
ipStaticRouteExtDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"static route of intention net segment"
|
|
::= { ipStaticRouteExtEntry 1 }
|
|
|
|
--xxx.100.16.2.1.1.2
|
|
ipStaticRouteExtMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "mask"
|
|
::= { ipStaticRouteExtEntry 2 }
|
|
--xxx.100.16.2.1.1.3
|
|
ipStaticRouteExtNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" next step ip"
|
|
::= { ipStaticRouteExtEntry 3 }
|
|
|
|
--xxx.100.16.2.1.1.4
|
|
ipStaticRouteExtMetric OBJECT-TYPE
|
|
SYNTAX INTEGER(1..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION " Manage distance/PRI"
|
|
::= { ipStaticRouteExtEntry 4 }
|
|
--xxx.100.16.2.1.1.5
|
|
ipStaticRouteExtStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
valid(1),
|
|
invalid(2),
|
|
waitingforset(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" When you get/getnext one entry, the meaning of 'valid' is that the static route which you get is
|
|
valid (or active); when you want to configure one static route, 'valid/creating' stand for setting one
|
|
entry, and 'invalid/destory' stands for delete the static route."
|
|
::= { ipStaticRouteExtEntry 5 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
|
|
dvmrpMgt OBJECT IDENTIFIER ::= { l3 5 }
|
|
|
|
dvmrpScalar OBJECT IDENTIFIER ::= { dvmrpMgt 1 }
|
|
|
|
dvmrpVersionString OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's DVMRP version information. Similar to
|
|
sysDescr in MIB-II, this is a free-form field which can be
|
|
used to display vendor-specific information."
|
|
::= { dvmrpScalar 1 }
|
|
|
|
-- dvmrpScalar 2 was previously used for a global
|
|
-- Generation ID. However, the DVMRP spec changed it to
|
|
-- a per-interface parameter.
|
|
dvmrpNumRoutes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of entries in the routing table. This can be
|
|
used to monitor the routing table size."
|
|
|
|
|
|
::= { dvmrpScalar 3 }
|
|
|
|
dvmrpReachableRoutes OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of entries in the routing table with non
|
|
infinite metrics. This can be used to detect network
|
|
partitions by observing the ratio of reachable routes to
|
|
total routes."
|
|
::= { dvmrpScalar 4 }
|
|
|
|
|
|
-- The DVMRP Interface Table
|
|
|
|
dvmrpInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DvmrpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the router's multicast-
|
|
capable interfaces."
|
|
::= { dvmrpMgt 2 }
|
|
|
|
dvmrpInterfaceEntry OBJECT-TYPE
|
|
SYNTAX DvmrpInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the dvmrpInterfaceTable. This
|
|
row augments ipMRouteInterfaceEntry in the IP Multicast MIB,
|
|
where the threshold object resides."
|
|
INDEX { dvmrpInterfaceIndex }
|
|
::= { dvmrpInterfaceTable 1 }
|
|
|
|
DvmrpInterfaceEntry ::= SEQUENCE {
|
|
dvmrpInterfaceIndex InterfaceIndex,
|
|
dvmrpInterfaceLocalAddress IpAddress,
|
|
dvmrpInterfaceMetric Integer32,
|
|
dvmrpInterfaceStatus RowStatus,
|
|
dvmrpInterfaceRcvBadPkts Counter32,
|
|
dvmrpInterfaceRcvBadRoutes Counter32,
|
|
dvmrpInterfaceSentRoutes Counter32,
|
|
dvmrpInterfaceKey SnmpAdminString,
|
|
dvmrpInterfaceKeyVersion Integer32,
|
|
dvmrpInterfaceGenerationId Integer32
|
|
}
|
|
|
|
dvmrpInterfaceIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface for which DVMRP is
|
|
enabled."
|
|
::= { dvmrpInterfaceEntry 1 }
|
|
|
|
dvmrpInterfaceLocalAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address this system will use as a source address on
|
|
this interface. On unnumbered interfaces, it must be the
|
|
same value as dvmrpInterfaceLocalAddress for some interface
|
|
on the system."
|
|
::= { dvmrpInterfaceEntry 2 }
|
|
|
|
dvmrpInterfaceMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (1..31)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The distance metric for this interface which is used to
|
|
calculate distance vectors."
|
|
DEFVAL { 1 }
|
|
::= { dvmrpInterfaceEntry 3 }
|
|
|
|
dvmrpInterfaceStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. Creating the entry enables DVMRP
|
|
on the virtual interface; destroying the entry or setting it
|
|
to notInService disables DVMRP on the virtual interface."
|
|
::= { dvmrpInterfaceEntry 4 }
|
|
|
|
dvmrpInterfaceRcvBadPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DVMRP messages received on the interface by
|
|
the DVMRP process which were subsequently discarded as
|
|
invalid (e.g. invalid packet format, or a route report from
|
|
an unknown neighbor)."
|
|
::= { dvmrpInterfaceEntry 5 }
|
|
|
|
dvmrpInterfaceRcvBadRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes, in valid DVMRP packets, which were
|
|
ignored because the entry was invalid."
|
|
::= { dvmrpInterfaceEntry 6 }
|
|
|
|
dvmrpInterfaceSentRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes, in DVMRP Report packets, which have
|
|
been sent on this interface. Together with
|
|
dvmrpNeighborRcvRoutes at a peer, this object is useful for
|
|
detecting routes being lost."
|
|
::= { dvmrpInterfaceEntry 7 }
|
|
|
|
dvmrpInterfaceKey OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (shared) key for authenticating neighbors on this
|
|
interface. This object is intended solely for the purpose
|
|
of setting the interface key, and MUST be accessible only
|
|
via requests using both authentication and privacy. The
|
|
agent MAY report an empty string in response to get, get-
|
|
next, get-bulk requests."
|
|
::= { dvmrpInterfaceEntry 8 }
|
|
|
|
dvmrpInterfaceKeyVersion OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest version number of all known interface keys for
|
|
this interface used for authenticating neighbors."
|
|
::= { dvmrpInterfaceEntry 9 }
|
|
|
|
dvmrpInterfaceGenerationId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The generation identifier for the interface. This is used
|
|
by neighboring routers to detect whether the DVMRP routing
|
|
table should be resent."
|
|
::= { dvmrpInterfaceEntry 10 }
|
|
|
|
-- The DVMRP Neighbor Table
|
|
|
|
dvmrpNeighborTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DvmrpNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the router's DVMRP
|
|
neighbors, as discovered by receiving DVMRP messages."
|
|
::= { dvmrpMgt 3 }
|
|
|
|
dvmrpNeighborEntry OBJECT-TYPE
|
|
SYNTAX DvmrpNeighborEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the dvmrpNeighborTable."
|
|
INDEX { dvmrpNeighborIfIndex, dvmrpNeighborAddress }
|
|
::= { dvmrpNeighborTable 1 }
|
|
|
|
DvmrpNeighborEntry ::= SEQUENCE {
|
|
dvmrpNeighborIfIndex InterfaceIndex,
|
|
dvmrpNeighborAddress IpAddress,
|
|
dvmrpNeighborUpTime TimeTicks,
|
|
dvmrpNeighborExpiryTime TimeTicks,
|
|
dvmrpNeighborGenerationId Integer32,
|
|
dvmrpNeighborMajorVersion Integer32,
|
|
dvmrpNeighborMinorVersion Integer32,
|
|
dvmrpNeighborCapabilities BITS,
|
|
dvmrpNeighborRcvRoutes Counter32,
|
|
dvmrpNeighborRcvBadPkts Counter32,
|
|
dvmrpNeighborRcvBadRoutes Counter32,
|
|
dvmrpNeighborState INTEGER
|
|
}
|
|
|
|
dvmrpNeighborIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the virtual interface used to
|
|
reach this DVMRP neighbor."
|
|
::= { dvmrpNeighborEntry 1 }
|
|
|
|
dvmrpNeighborAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the DVMRP neighbor for which this entry
|
|
contains information."
|
|
::= { dvmrpNeighborEntry 2 }
|
|
|
|
dvmrpNeighborUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since this DVMRP neighbor (last) became a neighbor
|
|
of the local router."
|
|
::= { dvmrpNeighborEntry 3 }
|
|
|
|
dvmrpNeighborExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum time remaining before this DVMRP neighbor will
|
|
be aged out."
|
|
::= { dvmrpNeighborEntry 4 }
|
|
|
|
dvmrpNeighborGenerationId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The neighboring router's generation identifier."
|
|
::= { dvmrpNeighborEntry 5 }
|
|
|
|
dvmrpNeighborMajorVersion OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The neighboring router's major DVMRP version number."
|
|
::= { dvmrpNeighborEntry 6 }
|
|
|
|
dvmrpNeighborMinorVersion OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The neighboring router's minor DVMRP version number."
|
|
::= { dvmrpNeighborEntry 7 }
|
|
|
|
dvmrpNeighborCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
leaf(0),
|
|
prune(1),
|
|
generationID(2),
|
|
mtrace(3),
|
|
snmp(4),
|
|
netmask(5)
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the neighboring router's
|
|
capabilities. The leaf bit indicates that the neighbor has
|
|
only one interface with neighbors. The prune bit indicates
|
|
that the neighbor supports pruning. The generationID bit
|
|
indicates that the neighbor sends its generationID in Probe
|
|
messages. The mtrace bit indicates that the neighbor can
|
|
handle mtrace requests. The snmp bit indicates that the
|
|
neighbor support snmp. The netmask bit indicates that the
|
|
neighbor support netmask."
|
|
::= { dvmrpNeighborEntry 8 }
|
|
|
|
dvmrpNeighborRcvRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of routes received in valid DVMRP packets
|
|
received from this neighbor. This can be used to diagnose
|
|
problems such as unicast route injection, as well as giving
|
|
an indication of the level of DVMRP route exchange
|
|
activity."
|
|
::= { dvmrpNeighborEntry 9 }
|
|
|
|
dvmrpNeighborRcvBadPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of packet received from this neighbor which were
|
|
discarded as invalid."
|
|
::= { dvmrpNeighborEntry 10 }
|
|
|
|
dvmrpNeighborRcvBadRoutes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes, in valid DVMRP packets received from
|
|
this neighbor, which were ignored because the entry was
|
|
invalid."
|
|
::= { dvmrpNeighborEntry 11 }
|
|
|
|
dvmrpNeighborState OBJECT-TYPE
|
|
SYNTAX INTEGER { oneway(1), active(2), ignoring(3), down(4) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of the neighbor adjacency."
|
|
::= { dvmrpNeighborEntry 12 }
|
|
|
|
|
|
-- The DVMRP Route Table
|
|
|
|
dvmrpRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DvmrpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of routes learned through DVMRP route exchange."
|
|
::= { dvmrpMgt 4 }
|
|
|
|
dvmrpRouteEntry OBJECT-TYPE
|
|
SYNTAX DvmrpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the multicast routing
|
|
information used by DVMRP in place of the unicast routing
|
|
information."
|
|
INDEX { dvmrpRouteSource, dvmrpRouteSourceMask }
|
|
::= { dvmrpRouteTable 1 }
|
|
|
|
DvmrpRouteEntry ::= SEQUENCE {
|
|
dvmrpRouteSource IpAddress,
|
|
dvmrpRouteSourceMask IpAddress,
|
|
dvmrpRouteUpstreamNeighbor IpAddress,
|
|
dvmrpRouteIfIndex InterfaceIndexOrZero,
|
|
dvmrpRouteMetric Integer32,
|
|
dvmrpRouteExpiryTime TimeTicks,
|
|
dvmrpRouteUpTime TimeTicks
|
|
}
|
|
|
|
dvmrpRouteSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network address which when combined with the
|
|
corresponding value of dvmrpRouteSourceMask identifies the
|
|
sources for which this entry contains multicast routing
|
|
information."
|
|
::= { dvmrpRouteEntry 1 }
|
|
|
|
dvmrpRouteSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network mask which when combined with the corresponding
|
|
value of dvmrpRouteSource identifies the sources for which
|
|
this entry contains multicast routing information."
|
|
::= { dvmrpRouteEntry 2 }
|
|
|
|
dvmrpRouteUpstreamNeighbor OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the upstream neighbor (e.g., RPF neighbor)
|
|
from which IP datagrams from these sources are received."
|
|
::= { dvmrpRouteEntry 3 }
|
|
|
|
dvmrpRouteIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface on which IP
|
|
datagrams sent by these sources are received. A value of 0
|
|
typically means the route is an aggregate for which no next-
|
|
hop interface exists."
|
|
::= { dvmrpRouteEntry 4 }
|
|
|
|
dvmrpRouteMetric OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The distance in hops to the source subnet."
|
|
::= { dvmrpRouteEntry 5 }
|
|
|
|
dvmrpRouteExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum amount of time remaining before this entry will
|
|
be aged out."
|
|
::= { dvmrpRouteEntry 6 }
|
|
|
|
dvmrpRouteUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time since the route represented by this entry was
|
|
learned by the router."
|
|
::= { dvmrpRouteEntry 7 }
|
|
|
|
-- The DVMRP Routing Next Hop Table
|
|
|
|
|
|
dvmrpRouteNextHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DvmrpRouteNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing information on the next
|
|
hops on outgoing interfaces for routing IP multicast
|
|
datagrams."
|
|
::= { dvmrpMgt 5 }
|
|
|
|
dvmrpRouteNextHopEntry OBJECT-TYPE
|
|
SYNTAX DvmrpRouteNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the list of next hops on
|
|
outgoing interfaces to which IP multicast datagrams from
|
|
particular sources are routed."
|
|
INDEX { dvmrpRouteNextHopSource, dvmrpRouteNextHopSourceMask,
|
|
dvmrpRouteNextHopIfIndex }
|
|
::= { dvmrpRouteNextHopTable 1 }
|
|
|
|
DvmrpRouteNextHopEntry ::= SEQUENCE {
|
|
dvmrpRouteNextHopSource IpAddress,
|
|
dvmrpRouteNextHopSourceMask IpAddress,
|
|
dvmrpRouteNextHopIfIndex InterfaceIndex,
|
|
dvmrpRouteNextHopType INTEGER
|
|
}
|
|
|
|
dvmrpRouteNextHopSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network address which when combined with the
|
|
corresponding value of dvmrpRouteNextHopSourceMask
|
|
identifies the sources for which this entry specifies a next
|
|
hop on an outgoing interface."
|
|
::= { dvmrpRouteNextHopEntry 1 }
|
|
|
|
dvmrpRouteNextHopSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The network mask which when combined with the corresponding
|
|
value of dvmrpRouteNextHopSource identifies the sources for
|
|
which this entry specifies a next hop on an outgoing
|
|
interface."
|
|
::= { dvmrpRouteNextHopEntry 2 }
|
|
|
|
dvmrpRouteNextHopIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex value of the interface for the outgoing
|
|
interface for this next hop."
|
|
::= { dvmrpRouteNextHopEntry 3 }
|
|
|
|
dvmrpRouteNextHopType OBJECT-TYPE
|
|
SYNTAX INTEGER { leaf(1), branch(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type is leaf if no downstream dependent neighbors exist on
|
|
the outgoing virtual interface. Otherwise, type is branch."
|
|
::= { dvmrpRouteNextHopEntry 4 }
|
|
|
|
-- The DVMRP Prune Table
|
|
|
|
dvmrpPruneTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DvmrpPruneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table listing the router's upstream prune
|
|
state."
|
|
::= { dvmrpMgt 6 }
|
|
|
|
dvmrpPruneEntry OBJECT-TYPE
|
|
SYNTAX DvmrpPruneEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the dvmrpPruneTable."
|
|
INDEX { dvmrpPruneGroup, dvmrpPruneSource,
|
|
dvmrpPruneSourceMask }
|
|
::= { dvmrpPruneTable 1 }
|
|
|
|
DvmrpPruneEntry ::= SEQUENCE {
|
|
dvmrpPruneGroup IpAddress,
|
|
dvmrpPruneSource IpAddress,
|
|
dvmrpPruneSourceMask IpAddress,
|
|
dvmrpPruneExpiryTime TimeTicks
|
|
}
|
|
|
|
dvmrpPruneGroup OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group address which has been pruned."
|
|
::= { dvmrpPruneEntry 1 }
|
|
|
|
dvmrpPruneSource OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the source or source network which has been
|
|
pruned."
|
|
::= { dvmrpPruneEntry 2 }
|
|
|
|
dvmrpPruneSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the source or source network which has been
|
|
pruned. The mask must either be all 1's, or else
|
|
dvmrpPruneSource and dvmrpPruneSourceMask must match
|
|
dvmrpRouteSource and dvmrpRouteSourceMask for some entry in
|
|
the dvmrpRouteTable."
|
|
::= { dvmrpPruneEntry 3 }
|
|
|
|
dvmrpPruneExpiryTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time remaining before this prune should
|
|
expire at the upstream neighbor. This value should be the
|
|
minimum of the default prune lifetime and the remaining
|
|
prune lifetimes of the local router's downstream neighbors,
|
|
if any."
|
|
::= { dvmrpPruneEntry 4 }
|
|
|
|
|
|
|
|
|
|
ripMgt OBJECT IDENTIFIER ::= { l3 3 }
|
|
ospfMgt OBJECT IDENTIFIER ::= { l3 4 }
|
|
-- ripMgt
|
|
|
|
|
|
ripTimers OBJECT IDENTIFIER ::= { ripMgt 1 }
|
|
|
|
ripUpdateTime OBJECT-TYPE
|
|
SYNTAX Integer32 (5..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The update time in seconds controls the advertising of regular
|
|
update messages. The real working model, while using this
|
|
timer, the time should be offset by a small random time
|
|
(+/- 0 to 5 seconds each time it is set."
|
|
DEFVAL { 30 }
|
|
::= { ripTimers 1 }
|
|
|
|
ripTimeoutTime OBJECT-TYPE
|
|
SYNTAX Integer32 (5..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The timeout timer in seconds governs the validity of a route.
|
|
It is initialized when a route is established, and any time
|
|
an update message is received for the route. If the setting time
|
|
elapses from the last time the timrout was initialized, the route
|
|
is considered to have expired, and the hop count of the route is
|
|
set to infinite. It should be at least three times the value of
|
|
update timer."
|
|
DEFVAL { 180 }
|
|
::= { ripTimers 2 }
|
|
|
|
ripGarbageCollectionTime OBJECT-TYPE
|
|
SYNTAX Integer32 (5..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "When the information about a route becomes invalid, the system
|
|
should not immediately purge that route from its table. Instead,
|
|
it continues to advertise the route with a metric of infinite.
|
|
At the same time, the garbage-collection timer is set for that
|
|
route. When the count reaches zero, the route is purged from the
|
|
the table. This timer allows neighbors to become aware of
|
|
the invalidity of a route prior to purging."
|
|
DEFVAL { 120 }
|
|
::= { ripTimers 3 }
|
|
|
|
ripRoutingProcessStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatusPrivate
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or Disable RIP routing process on a system."
|
|
DEFVAL { disabled }
|
|
::= { ripMgt 2 }
|
|
|
|
ripRouterVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rip1(1),
|
|
rip2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "To specify a RIP version used globally by the rourter."
|
|
DEFVAL { rip2 }
|
|
::= { ripMgt 3 }
|
|
|
|
|
|
|
|
ripInstabilityPreventingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RipInstabilityPreventingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A list of RIP instability preventing status"
|
|
::= { ripMgt 4 }
|
|
|
|
ripInstabilityPreventingEntry OBJECT-TYPE
|
|
SYNTAX RipInstabilityPreventingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in the table, containing information
|
|
about RIP instability preventing configuration.
|
|
The ifIndex index is a VLAN's ifIndex"
|
|
INDEX { ripVlanIndex }
|
|
::= { ripInstabilityPreventingTable 1 }
|
|
|
|
RipInstabilityPreventingEntry ::= SEQUENCE
|
|
{
|
|
ripVlanIndex Integer32,
|
|
ripSplitHorizonStatus INTEGER
|
|
}
|
|
|
|
|
|
ripVlanIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This is defined as a VLAN interface.
|
|
A routing interface is a VLAN binds a IP
|
|
subnet."
|
|
::= { ripInstabilityPreventingEntry 1 }
|
|
|
|
ripSplitHorizonStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
splitHorizon(2),
|
|
poisonReverse(0),
|
|
none(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or Disable RIP instability preventing status on an interface"
|
|
::= { ripInstabilityPreventingEntry 2 }
|
|
|
|
|
|
ripStatisticsReset OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
reset(1),
|
|
noReset(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Write it to reset(1), the following objects in RFC 1724
|
|
should be reset:
|
|
1. Global Counters:
|
|
'rip2GlobalRouteChanges',
|
|
'rip2GlobalQueries'.
|
|
2. Interface Status Table, for each 'rip2IfStatAddress':
|
|
'rip2IfStatRcvBadPackets',
|
|
'rip2IfStatRcvBadRoutes',
|
|
'rip2IfStatSendUpdates'
|
|
3. Peer Table, for each 'rip2PeerAddress' and 'rip2PeerDomain',
|
|
'rip2PeerRcvBadPackets',
|
|
'rip2PeerRcvBadRoutes'
|
|
When read it, this value always is noReset(2)."
|
|
::= { ripMgt 5 }
|
|
|
|
ripNetworkInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RipNetworkInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { ripMgt 6 }
|
|
|
|
ripNetworkInterfaceEntry OBJECT-TYPE
|
|
SYNTAX RipNetworkInterfaceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { ripNetworkInterfaceAddress }
|
|
::= { ripNetworkInterfaceTable 1 }
|
|
|
|
RipNetworkInterfaceEntry ::= SEQUENCE
|
|
{
|
|
ripNetworkInterfaceAddress IpAddress,
|
|
ripNetworkInterfaceStatus ValidStatus
|
|
}
|
|
|
|
|
|
ripNetworkInterfaceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The RIP Network address(the ip address of the interface)."
|
|
::= { ripNetworkInterfaceEntry 1 }
|
|
|
|
|
|
ripNetworkInterfaceStatus OBJECT-TYPE
|
|
SYNTAX ValidStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Set this variable to create or destroy a RIP network address.
|
|
ValidStatus:
|
|
A simple status value for the object to create and destroy
|
|
a table entry. This is a simplified variant of RowStatus as it
|
|
supports only two values. Setting it to valid(1) creates an entry.
|
|
Setting it to invalid(0) destroys an entry."
|
|
::= { ripNetworkInterfaceEntry 2 }
|
|
|
|
ripNetworkAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RipNetworkAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { ripMgt 7 }
|
|
|
|
ripNetworkAddrEntry OBJECT-TYPE
|
|
SYNTAX RipNetworkAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { ripNetworkAddrAddress,ripNetworkAddrPrefixLen }
|
|
::= { ripNetworkAddrTable 1 }
|
|
|
|
RipNetworkAddrEntry ::= SEQUENCE
|
|
{
|
|
ripNetworkAddrAddress IpAddress,
|
|
ripNetworkAddrPrefixLen INTEGER,
|
|
ripNetworkAddrStatus INTEGER
|
|
}
|
|
|
|
|
|
ripNetworkAddrAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The RIP Network address."
|
|
::= { ripNetworkAddrEntry 1 }
|
|
|
|
ripNetworkAddrPrefixLen OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The RIP Network prefix length of address."
|
|
::= { ripNetworkAddrEntry 2 }
|
|
|
|
|
|
ripNetworkAddrStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid (0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Set this variable to create or destroy a RIP network address.
|
|
ValidStatus:
|
|
A simple status value for the object to create and destroy
|
|
a table entry. This is a simplified variant of RowStatus as it
|
|
supports only two values. Setting it to valid(1) creates an entry.
|
|
Setting it to invalid(0) destroys an entry."
|
|
::= { ripNetworkAddrEntry 3 }
|
|
|
|
|
|
-- ospfMgt
|
|
|
|
ospfSystemGroup OBJECT IDENTIFIER ::= { ospfMgt 1 }
|
|
|
|
ospfRouterIdType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(1),
|
|
manual(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Set router ID automatically or manually."
|
|
DEFVAL { auto }
|
|
::= { ospfSystemGroup 1 }
|
|
|
|
ospfRfc1583CompatibleState OBJECT-TYPE
|
|
SYNTAX EnabledStatusPrivate
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable rfc1583 compatibility."
|
|
DEFVAL { disabled }
|
|
::= { ospfSystemGroup 2 }
|
|
|
|
ospfAutoCost OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4294967)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Set the reference bandwith of auto cost, the unit is Mbps."
|
|
DEFVAL { 100 }
|
|
::= { ospfSystemGroup 3 }
|
|
|
|
ospfAdvertiseDefaultRoute OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
always(1),
|
|
notAlways(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "If always is set, always advertises the default route regardless
|
|
of whether the default route exists;If notalways is set ,advertises
|
|
the default route when the router have the default route."
|
|
DEFVAL { disable }
|
|
::= { ospfSystemGroup 4 }
|
|
|
|
|
|
ospfDefaultExternalMetric OBJECT-TYPE
|
|
SYNTAX OspfBigMetric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Metric used for generating the default route."
|
|
::= { ospfSystemGroup 5 }
|
|
|
|
ospfSpfHoldTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Sets the hold time between two consecutive SPF calculations."
|
|
DEFVAL { 10 }
|
|
::= { ospfSystemGroup 6 }
|
|
|
|
ospfSpfDelayTime OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "Sets the delay time to calculate SPF Delay time, in seconds, between
|
|
when OSPF receives a topology change and when it starts an SPF calculation."
|
|
DEFVAL { 5 }
|
|
::= { ospfSystemGroup 7 }
|
|
|
|
ospfAreaNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Records the OSPF area numbers."
|
|
|
|
DEFVAL { 0 }
|
|
::= { ospfSystemGroup 8 }
|
|
|
|
ospfNssaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfNssaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptually table for ospfNssaEntry."
|
|
::= {ospfMgt 2 }
|
|
|
|
ospfNssaEntry OBJECT-TYPE
|
|
SYNTAX OspfNssaEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptually row for ospfNssaTable."
|
|
INDEX { ospfNssaAreaId }
|
|
::= { ospfNssaTable 1 }
|
|
|
|
OspfNssaEntry ::= SEQUENCE
|
|
{
|
|
ospfNssaAreaId OspfAreaID,
|
|
ospfNssaStatus EnabledStatusPrivate,
|
|
ospfNssaRedistributeStatus EnabledStatusPrivate,
|
|
ospfNssaOriginateDefaultInfoStatus EnabledStatusPrivate
|
|
|
|
}
|
|
|
|
ospfNssaAreaId OBJECT-TYPE
|
|
SYNTAX OspfAreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The 32-bit identifier for the NSSA. On creation,
|
|
this can be derived from the instance."
|
|
::= { ospfNssaEntry 1 }
|
|
|
|
ospfNssaStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatusPrivate
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this conceptual row entry. This object isused to manage the
|
|
creation and deletion of conceptual rows."
|
|
|
|
::= { ospfNssaEntry 2 }
|
|
|
|
ospfNssaRedistributeStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatusPrivate
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enabled or disabled to import routes only into the normal areas,
|
|
but not into the NSSA area."
|
|
DEFVAL { enabled }
|
|
::= { ospfNssaEntry 3 }
|
|
|
|
ospfNssaOriginateDefaultInfoStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatusPrivate
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION "Enable or disable to generate a Type 7 default into the NSSA area."
|
|
|
|
DEFVAL { disabled }
|
|
::= { ospfNssaEntry 4 }
|
|
|
|
|
|
|
|
ospfRedistributeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfRedistributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The conceptual table of all of ospfRedistributeEntry."
|
|
::= {ospfMgt 3 }
|
|
|
|
|
|
ospfRedistributeEntry OBJECT-TYPE
|
|
SYNTAX OspfRedistributeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The conceptual row for ospfRedistributeTable."
|
|
INDEX { ospfRedistributeProtocol }
|
|
::= { ospfRedistributeTable 1 }
|
|
|
|
OspfRedistributeEntry ::= SEQUENCE
|
|
{
|
|
ospfRedistributeProtocol INTEGER,
|
|
ospfRedistributeStatus EnabledStatusPrivate,
|
|
ospfRedistributeMetricType INTEGER,
|
|
ospfRedistributeMetric OspfBigMetric
|
|
|
|
}
|
|
|
|
ospfRedistributeProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
kernel(1),
|
|
connect(2),
|
|
static(3),
|
|
rip(4),
|
|
ospf(6),
|
|
bgp(8),
|
|
isis(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "Protocol ID."
|
|
|
|
::= { ospfRedistributeEntry 1 }
|
|
|
|
ospfRedistributeStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatusPrivate
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" enable-- redistribute the specific route,disable--- does not redistribute the specific route.For example
|
|
when the ospfRedistributeProtocol is equal to rip, 'enable' stands for redistribute the route from rip."
|
|
::= { ospfRedistributeEntry 2 }
|
|
|
|
ospfRedistributeMetricType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
type1(1),
|
|
type2(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Metric type."
|
|
DEFVAL {type2}
|
|
::= { ospfRedistributeEntry 3 }
|
|
|
|
ospfRedistributeMetric OBJECT-TYPE
|
|
SYNTAX OspfBigMetric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Metric value."
|
|
::= { ospfRedistributeEntry 4 }
|
|
|
|
|
|
|
|
ospfSummaryAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfSummaryAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The conceptual table of all of ospfSummaryAddressEntry."
|
|
::= {ospfMgt 4}
|
|
|
|
ospfSummaryAddressEntry OBJECT-TYPE
|
|
SYNTAX OspfSummaryAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The conceptual row for ospfSummaryAddressTable."
|
|
INDEX { ospfSummaryAddress,ospfSummaryMask }
|
|
::= { ospfSummaryAddressTable 1 }
|
|
|
|
OspfSummaryAddressEntry ::= SEQUENCE
|
|
{
|
|
ospfSummaryAddress IpAddress,
|
|
ospfSummaryMask IpAddress,
|
|
ospfSummaryStatus EnabledStatusPrivate
|
|
}
|
|
|
|
ospfSummaryAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Summary address."
|
|
::= { ospfSummaryAddressEntry 1 }
|
|
|
|
ospfSummaryMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Summary mask."
|
|
::= { ospfSummaryAddressEntry 2 }
|
|
|
|
|
|
ospfSummaryStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatusPrivate
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" valid/enable--- define a summary, invalid/disable destory the summary from the router"
|
|
::= { ospfSummaryAddressEntry 3 }
|
|
|
|
ospfNetworkAreaAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OspfNetworkAreaAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The conceptual table of all of ospfNetworkAreaAddressEntry."
|
|
::= {ospfMgt 5 }
|
|
|
|
ospfNetworkAreaAddressEntry OBJECT-TYPE
|
|
SYNTAX OspfNetworkAreaAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The conceptual row for ospfNetworkAreaAddressTable."
|
|
INDEX { ospfNetworkAareaAddress,ospfNetworkAreaMask,ospfNetworkAreaAreaId }
|
|
::= { ospfNetworkAreaAddressTable 1 }
|
|
|
|
OspfNetworkAreaAddressEntry ::= SEQUENCE
|
|
{
|
|
ospfNetworkAareaAddress IpAddress,
|
|
ospfNetworkAreaMask IpAddress,
|
|
ospfNetworkAreaAreaId IpAddress,
|
|
ospfNetworkAreaStatus EnabledStatusPrivate
|
|
}
|
|
|
|
ospfNetworkAareaAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NetworkArea address."
|
|
::= { ospfNetworkAreaAddressEntry 1 }
|
|
|
|
ospfNetworkAreaMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NetworkArea mask."
|
|
::= { ospfNetworkAreaAddressEntry 2 }
|
|
|
|
ospfNetworkAreaAreaId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NetworkArea area ID."
|
|
::= { ospfNetworkAreaAddressEntry 3 }
|
|
|
|
ospfNetworkAreaStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatusPrivate
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"enabled(1), disabled(0).
|
|
valid/enable--- run the ospf on the interfaces,which match the ipaddr/mask;
|
|
invalid/disable--disable the ospf.
|
|
ValidStatus:
|
|
A simple status value for the object to create and destroy
|
|
a table entry. This is a simplified variant of RowStatus as it
|
|
supports only two values. Setting it to valid(1) creates an entry.
|
|
Setting it to invalid(0) destroys an entry."
|
|
::= { ospfNetworkAreaAddressEntry 4 }
|
|
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
sntpPollTime OBJECT-TYPE
|
|
SYNTAX INTEGER(16..16284)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interval for SNTP clients to send requests to NTP/SNTP."
|
|
::= { sntpMgt 1 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
sntpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SntpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ipv4 sntp server configration table."
|
|
::= { sntpMgt 2 }
|
|
|
|
sntpServerEntry OBJECT-TYPE
|
|
SYNTAX SntpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of configuration parameters for a ipv4 sntp server."
|
|
INDEX {sntpServerVersion,sntpServerAddress}
|
|
::= { sntpServerTable 1 }
|
|
|
|
SntpServerEntry
|
|
::= SEQUENCE
|
|
{
|
|
sntpServerVersion INTEGER,
|
|
sntpServerAddress IpAddress,
|
|
sntpServerStatus INTEGER
|
|
}
|
|
|
|
sntpServerVersion OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of ipv4 sntp server."
|
|
::= { sntpServerEntry 1}
|
|
|
|
sntpServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ipv4 address of the sntp server."
|
|
::= { sntpServerEntry 2}
|
|
|
|
|
|
sntpServerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Now state."
|
|
::= { sntpServerEntry 3 }
|
|
|
|
sntpServer6Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SntpServer6Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ipv6 sntp server configration table."
|
|
::= { sntpMgt 3 }
|
|
|
|
sntpServer6Entry OBJECT-TYPE
|
|
SYNTAX SntpServer6Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of configuration parameters for a ipv6 sntp server."
|
|
INDEX {sntpServer6Version,sntpServer6Address}
|
|
::= { sntpServer6Table 1 }
|
|
|
|
SntpServer6Entry
|
|
::= SEQUENCE
|
|
{
|
|
sntpServer6Version INTEGER,
|
|
sntpServer6Address Ipv6Address,
|
|
sntpServer6Status INTEGER
|
|
}
|
|
|
|
sntpServer6Version OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of ipv6 sntp server."
|
|
::= { sntpServer6Entry 1}
|
|
|
|
sntpServer6Address OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the ipv6 sntp server."
|
|
::= { sntpServer6Entry 2}
|
|
|
|
sntpServer6Status OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Now state."
|
|
::= { sntpServer6Entry 3 }
|
|
|
|
sntpTimeZone OBJECT IDENTIFIER ::= { sntpMgt 4 }
|
|
|
|
sntpTimeZoneName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The name of sntp time zone."
|
|
::= { sntpTimeZone 1 }
|
|
|
|
sntpTimeZoneType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
add(1),
|
|
subtract(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The type of sntp time zone."
|
|
::= { sntpTimeZone 2 }
|
|
|
|
sntpTimeZoneTime OBJECT-TYPE
|
|
SYNTAX INTEGER(0..12)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The interval time of sntp time zone."
|
|
::= { sntpTimeZone 3 }
|
|
|
|
sntpTimeZoneStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "now state of sntp time zone."
|
|
::= { sntpTimeZone 4 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
--xxx.100.18.1 Urpf
|
|
|
|
urpfEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " Global Enable or disable the Unicast reverse path forwarding."
|
|
::= { urpf 1 }
|
|
|
|
-- The Urpf Interface Configration Table
|
|
|
|
urpfPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UrpfPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The URPF port configration table."
|
|
::= { urpf 2 }
|
|
|
|
--xxx.100.18.1.1
|
|
urpfPortEntry OBJECT-TYPE
|
|
SYNTAX UrpfPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is port index."
|
|
INDEX { urpfPortIndex }
|
|
::= { urpfPortTable 1 }
|
|
|
|
UrpfPortEntry
|
|
::= SEQUENCE
|
|
{
|
|
urpfPortIndex INTEGER,
|
|
urpfPortMode INTEGER,
|
|
urpfPortAllowDefault INTEGER,
|
|
urpfPortStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.18.1.1.1
|
|
urpfPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Index."
|
|
::= { urpfPortEntry 1 }
|
|
|
|
--xxx.100.18.1.1.2
|
|
urpfPortMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
loose(1),
|
|
strict(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configration of the URPF mode on the port."
|
|
::= { urpfPortEntry 2}
|
|
|
|
--xxx.100.18.1.1.3
|
|
urpfPortAllowDefault OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
allowdefaultroute(1),
|
|
noallowdefaultroute(0)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow or not allow default route of URPF."
|
|
::= { urpfPortEntry 3}
|
|
|
|
--xxx.100.18.1.1.4
|
|
urpfPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { urpfPortEntry 4 }
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
|
|
|
|
--xxx.100.20.1 Dcscm dc
|
|
|
|
-- The Dcscm dc Enable Table
|
|
|
|
dcscmdcEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dcscm destination control multicast is disable or enable"
|
|
::= { dcscm 1 }
|
|
|
|
--xxx.100.20.2
|
|
|
|
-- The Dcscm dc Acl Table
|
|
|
|
dcscmdcAcl OBJECT IDENTIFIER ::= { dcscm 2 }
|
|
|
|
|
|
--xxx.100.20.2.1
|
|
dcscmdcAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (6000..7999)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Acl number of Dcscm destination control multicast,the range is 6000--7999."
|
|
::= { dcscmdcAcl 1 }
|
|
|
|
--xxx.100.20.2.2
|
|
dcscmdcAclSourceIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source ip address of acl entry "
|
|
::= { dcscmdcAcl 2}
|
|
|
|
--xxx.100.20.2.3
|
|
dcscmdcAclSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Mask of acl entry "
|
|
::= { dcscmdcAcl 3}
|
|
|
|
--xxx.100.20.2.4
|
|
dcscmdcAclDestinationIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination ip address of acl entry.the destination ip must be a valid multicast group address. "
|
|
::= { dcscmdcAcl 4}
|
|
|
|
--xxx.100.20.2.5
|
|
dcscmdcAclDestinationMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination Mask of acl entry. the destination mask should meet the request of muticast group address. "
|
|
::= { dcscmdcAcl 5}
|
|
|
|
--xxx.100.20.2.6
|
|
dcscmdcAclPermitOrDeny OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
permit(1),
|
|
deny(0),
|
|
deltheAcl(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" acl entry permit or deny ; 0:deny; 1:permit; 2:del this acl entry"
|
|
::= { dcscmdcAcl 6}
|
|
|
|
--xxx.100.20.3
|
|
|
|
-- The DCSCM VMac Destination binding Table
|
|
|
|
dcscmVMacbindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DcscmVMacbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm destination control multicast, Acl is binded to VMac"
|
|
::= { dcscm 3 }
|
|
--xxx.100.20.3.1
|
|
dcscmVMacbindingEntry OBJECT-TYPE
|
|
SYNTAX DcscmVMacbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is Vlanid,MacAddress"
|
|
INDEX { dcscmVMacbindingVlanid,dcscmVMacbindingMacAddr }
|
|
::= { dcscmVMacbindingTable 1 }
|
|
|
|
DcscmVMacbindingEntry
|
|
::= SEQUENCE
|
|
{
|
|
dcscmVMacbindingVlanid INTEGER,
|
|
dcscmVMacbindingMacAddr MacAddress,
|
|
dcscmVMacbindingAclNumber INTEGER
|
|
}
|
|
|
|
--xxx.100.20.3.1.1
|
|
dcscmVMacbindingVlanid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm destination control multicast,The vlanid of rule"
|
|
::= { dcscmVMacbindingEntry 1 }
|
|
|
|
--xxx.100.20.3.1.2
|
|
dcscmVMacbindingMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm destination control multicast,The Mac Address of rule"
|
|
::= { dcscmVMacbindingEntry 2 }
|
|
|
|
--xxx.100.20.3.1.3
|
|
dcscmVMacbindingAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0|6000..7999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm destination control multicast,The Acl number of rule ; 0 means del the rule binded to vmac"
|
|
::= { dcscmVMacbindingEntry 3 }
|
|
|
|
--xxx.100.20.4
|
|
|
|
-- The DCSCM Sip Destination binding Table
|
|
|
|
dcscmSipbindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DcscmSipbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm destination control multicast, Acl is binded to Sip"
|
|
::= { dcscm 4 }
|
|
--xxx.100.20.4.1
|
|
dcscmSipbindingEntry OBJECT-TYPE
|
|
SYNTAX DcscmSipbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is Sourceip,SourceMask "
|
|
INDEX { dcscmSipbindingSipAddress,dcscmSipbindingSipMask }
|
|
::= { dcscmSipbindingTable 1 }
|
|
|
|
DcscmSipbindingEntry
|
|
::= SEQUENCE
|
|
{
|
|
dcscmSipbindingSipAddress IpAddress,
|
|
dcscmSipbindingSipMask INTEGER,
|
|
dcscmSipbindingAclNumber INTEGER
|
|
}
|
|
|
|
--xxx.100.20.4.1.1
|
|
dcscmSipbindingSipAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm destination control multicast,The Source ip of rule"
|
|
::= { dcscmSipbindingEntry 1 }
|
|
|
|
--xxx.100.20.4.1.2
|
|
dcscmSipbindingSipMask OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm destination control multicast,The Source ip mask len of rule"
|
|
::= { dcscmSipbindingEntry 2 }
|
|
|
|
--xxx.100.20.4.1.3
|
|
dcscmSipbindingAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0|6000..7999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm destination control multicast,The Acl number of rule;0 means del the rule binded to sip"
|
|
::= { dcscmSipbindingEntry 3 }
|
|
|
|
--xxx.100.20.5
|
|
|
|
-- The DCSCM Port Destination binding Table
|
|
|
|
dcscmdcPortbindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DcscmdcPortbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm destination control multicast, Acl is binded to Port"
|
|
::= { dcscm 5 }
|
|
--xxx.100.20.5.1
|
|
dcscmdcPortbindingEntry OBJECT-TYPE
|
|
SYNTAX DcscmdcPortbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is PortName"
|
|
INDEX { dcscmdcPortbindingPortName }
|
|
::= { dcscmdcPortbindingTable 1 }
|
|
|
|
DcscmdcPortbindingEntry
|
|
::= SEQUENCE
|
|
{
|
|
dcscmdcPortbindingPortName INTEGER,
|
|
dcscmdcPortbindingAclNumber INTEGER
|
|
}
|
|
|
|
--xxx.100.20.5.1.1
|
|
dcscmdcPortbindingPortName OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm destination control multicast,The Port index of rule"
|
|
::= { dcscmdcPortbindingEntry 1 }
|
|
|
|
--xxx.100.20.5.1.2
|
|
dcscmdcPortbindingAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0|6000..7999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm destination control multicast,The Acl number of rule;0 means del the rule binded to port"
|
|
::= { dcscmdcPortbindingEntry 2 }
|
|
|
|
--xxx.100.20.6 Dcscm sc
|
|
|
|
-- The Dcscm sc Enable Table
|
|
|
|
dcscmscEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm source control multicast is disable or enable"
|
|
::= { dcscm 6 }
|
|
|
|
--xxx.100.20.7
|
|
|
|
-- The DCSCM Sc Acl Table
|
|
|
|
dcscmscAcl OBJECT IDENTIFIER ::= { dcscm 7 }
|
|
|
|
|
|
--xxx.100.20.7.1
|
|
dcscmscAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (5000..5099)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Acl number of Dcscm source control multicast,the range is 5000--5099."
|
|
::= { dcscmscAcl 1 }
|
|
|
|
--xxx.100.20.7.2
|
|
dcscmscAclSourceIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source ip address of acl entry "
|
|
::= { dcscmscAcl 2}
|
|
|
|
--xxx.100.20.7.3
|
|
dcscmscAclSourceMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source Mask of acl entry "
|
|
::= { dcscmscAcl 3}
|
|
|
|
--xxx.100.20.7.4
|
|
dcscmscAclDestinationIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination ip address of acl entry, the destination ip must be a valid multicast group address."
|
|
::= { dcscmscAcl 4}
|
|
|
|
--xxx.100.20.7.5
|
|
dcscmscAclDestinationMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination Mask of acl entry, the destination mask should meet the request of muticast group address."
|
|
::= { dcscmscAcl 5}
|
|
|
|
--xxx.100.20.7.6
|
|
dcscmscAclPermitOrDeny OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
permit(1),
|
|
deny(0),
|
|
deltheAcl(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" acl entry permit or deny;0:deny; 1:permit; 2:del this acl"
|
|
::= { dcscmscAcl 6}
|
|
|
|
--xxx.100.20.8
|
|
|
|
-- The DCSCM Sc Port binding Table
|
|
|
|
dcscmscPortbindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DcscmscPortbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm destination control multicast, Acl is binded to Port"
|
|
::= { dcscm 8 }
|
|
--xxx.100.20.8.1
|
|
dcscmscPortbindingEntry OBJECT-TYPE
|
|
SYNTAX DcscmscPortbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is PortName"
|
|
INDEX { dcscmscPortbindingPortName }
|
|
::= { dcscmscPortbindingTable 1 }
|
|
|
|
DcscmscPortbindingEntry
|
|
::= SEQUENCE
|
|
{
|
|
dcscmscPortbindingPortName INTEGER,
|
|
dcscmscPortbindingAclNumber INTEGER
|
|
}
|
|
|
|
--xxx.100.20.8.1.1
|
|
dcscmscPortbindingPortName OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm source control multicast,The Port Number of rule"
|
|
::= { dcscmscPortbindingEntry 1 }
|
|
|
|
--xxx.100.20.8.1.2
|
|
dcscmscPortbindingAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0|5000..5099)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm source control multicast,The Acl number of rule ; 0 means to del the rule binded to port"
|
|
::= { dcscmscPortbindingEntry 2 }
|
|
|
|
--xxx.100.20.9
|
|
|
|
-- The DCSCM Policy multicast Table
|
|
|
|
dcscmpcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DcscmpcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm policy multicast table"
|
|
::= { dcscm 9 }
|
|
--xxx.100.20.9.1
|
|
dcscmpcEntry OBJECT-TYPE
|
|
SYNTAX DcscmpcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is dcscmpcSourceIp,dcscmpcSourceMasklen,dcscmpcDestinationIp,dcscmpcDestinationMasklen"
|
|
INDEX {dcscmpcSourceIp,dcscmpcSourceMasklen,dcscmpcDestinationIp,dcscmpcDestinationMasklen}
|
|
::= { dcscmpcTable 1 }
|
|
|
|
DcscmpcEntry
|
|
::= SEQUENCE
|
|
{
|
|
dcscmpcSourceIp IpAddress,
|
|
dcscmpcSourceMasklen INTEGER,
|
|
dcscmpcDestinationIp IpAddress,
|
|
dcscmpcDestinationMasklen INTEGER,
|
|
dcscmpccos INTEGER
|
|
}
|
|
|
|
--xxx.100.20.9.1.1
|
|
dcscmpcSourceIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"source ip address of policy multicast "
|
|
::= { dcscmpcEntry 1}
|
|
|
|
--xxx.100.20.9.1.2
|
|
dcscmpcSourceMasklen OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mask length of source Ip"
|
|
::= { dcscmpcEntry 2}
|
|
|
|
--xxx.100.20.9.1.3
|
|
dcscmpcDestinationIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination ip address of policy multicast,the destination ip must be a valid multicast group address. "
|
|
::= { dcscmpcEntry 3}
|
|
|
|
--xxx.100.20.9.1.4
|
|
dcscmpcDestinationMasklen OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mask length of destination Ip"
|
|
::= { dcscmpcEntry 4}
|
|
|
|
--xxx.100.20.9.1.5
|
|
dcscmpccos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" cos value of policy multicast; between 0 and 7 ;8 means to del the policy"
|
|
::= { dcscmpcEntry 5}
|
|
|
|
|
|
--xxx.100.21.1 Dcscm6 dc
|
|
|
|
-- The Dcscm6 dc Enable Table
|
|
|
|
dcscm6dcEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm6 destination control multicast is disable or enable"
|
|
::= { dcscm6 1 }
|
|
|
|
--xxx.100.21.2
|
|
|
|
-- The DCSCM6 dc Acl Table
|
|
|
|
dcscm6dcAcl OBJECT IDENTIFIER ::= { dcscm6 2 }
|
|
|
|
|
|
--xxx.100.21.2.1
|
|
dcscm6dcAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (9000..10999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Acl number of Dcscm6 destination control multicast,the range is 9000--10999."
|
|
::= { dcscm6dcAcl 1 }
|
|
|
|
--xxx.100.21.2.2
|
|
dcscm6dcAclSourceIp OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source ip address of acl entry "
|
|
::= { dcscm6dcAcl 2}
|
|
|
|
--xxx.100.21.2.3
|
|
dcscm6dcAclSourceMask OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source MaskLen of acl entry "
|
|
::= { dcscm6dcAcl 3}
|
|
|
|
--xxx.100.21.2.4
|
|
dcscm6dcAclDestinationIp OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination ip address of acl entry,the destination ip must be a valid multicast group address. "
|
|
::= { dcscm6dcAcl 4}
|
|
|
|
--xxx.100.21.2.5
|
|
dcscm6dcAclDestinationMask OBJECT-TYPE
|
|
SYNTAX INTEGER (8..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MaskLen of acl entry ,the mask length should meet the request of multicast group address."
|
|
::= { dcscm6dcAcl 5}
|
|
|
|
--xxx.100.21.2.6
|
|
dcscm6dcAclPermitOrDeny OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
permit(1),
|
|
deny(0),
|
|
deltheAcl(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" acl entry permit or deny; 0:deny; 1:permit; 2:del this acl"
|
|
::= { dcscm6dcAcl 6}
|
|
|
|
--xxx.100.21.3
|
|
|
|
-- The DCSCM6 VMac Destination binding Table
|
|
|
|
dcscm6VMacbindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dcscm6VMacbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm6 destination control multicast, Acl is binded to VMac"
|
|
::= { dcscm6 3 }
|
|
--xxx.100.21.3.1
|
|
dcscm6VMacbindingEntry OBJECT-TYPE
|
|
SYNTAX Dcscm6VMacbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is Vlanid,MacAddress"
|
|
INDEX { dcscm6VMacbindingVlanid,dcscm6VMacbindingMacAddr }
|
|
::= { dcscm6VMacbindingTable 1 }
|
|
|
|
Dcscm6VMacbindingEntry
|
|
::= SEQUENCE
|
|
{
|
|
dcscm6VMacbindingVlanid INTEGER,
|
|
dcscm6VMacbindingMacAddr MacAddress,
|
|
dcscm6VMacbindingAclNumber INTEGER
|
|
}
|
|
|
|
--xxx.100.21.3.1.1
|
|
dcscm6VMacbindingVlanid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm6 destination control multicast,The vlanid of rule"
|
|
::= { dcscm6VMacbindingEntry 1 }
|
|
|
|
--xxx.100.21.3.1.2
|
|
dcscm6VMacbindingMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm6 destination control multicast,The Mac Address of rule"
|
|
::= { dcscm6VMacbindingEntry 2 }
|
|
|
|
--xxx.100.21.3.1.3
|
|
dcscm6VMacbindingAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0|9000..10999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to vmac"
|
|
::= { dcscm6VMacbindingEntry 3 }
|
|
|
|
--xxx.100.21.4
|
|
|
|
-- The DCSCM6 Sip Destination binding Table
|
|
|
|
dcscm6SipbindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dcscm6SipbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm6 destination control multicast, Acl is binded to Sip"
|
|
::= { dcscm6 4 }
|
|
--xxx.100.21.4.1
|
|
dcscm6SipbindingEntry OBJECT-TYPE
|
|
SYNTAX Dcscm6SipbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is Sourceip,SourceMaskLen "
|
|
INDEX { dcscm6SipbindingSipAddress,dcscm6SipbindingSipMaskLen }
|
|
::= { dcscm6SipbindingTable 1 }
|
|
|
|
Dcscm6SipbindingEntry
|
|
::= SEQUENCE
|
|
{
|
|
dcscm6SipbindingSipAddress Ipv6Address,
|
|
dcscm6SipbindingSipMaskLen INTEGER,
|
|
dcscm6SipbindingAclNumber INTEGER
|
|
}
|
|
|
|
--xxx.100.21.4.1.1
|
|
dcscm6SipbindingSipAddress OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm6 destination control multicast,The Source ip of rule"
|
|
::= { dcscm6SipbindingEntry 1 }
|
|
|
|
--xxx.100.21.4.1.2
|
|
dcscm6SipbindingSipMaskLen OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm6 destination control multicast,The Source ip mask len of rule"
|
|
::= { dcscm6SipbindingEntry 2 }
|
|
|
|
--xxx.100.21.4.1.3
|
|
dcscm6SipbindingAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0|9000..10999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to sip"
|
|
::= { dcscm6SipbindingEntry 3 }
|
|
|
|
--xxx.100.21.5
|
|
|
|
-- The DCSCM6 Port Destination binding Table
|
|
|
|
dcscm6dcPortbindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dcscm6dcPortbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm6 destination control multicast, Acl is binded to Port"
|
|
::= { dcscm6 5 }
|
|
--xxx.100.21.5.1
|
|
dcscm6dcPortbindingEntry OBJECT-TYPE
|
|
SYNTAX Dcscm6dcPortbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is PortName"
|
|
INDEX { dcscm6dcPortbindingPortName }
|
|
::= { dcscm6dcPortbindingTable 1 }
|
|
|
|
Dcscm6dcPortbindingEntry
|
|
::= SEQUENCE
|
|
{
|
|
dcscm6dcPortbindingPortName INTEGER,
|
|
dcscm6dcPortbindingAclNumber INTEGER
|
|
}
|
|
|
|
--xxx.100.21.5.1.1
|
|
dcscm6dcPortbindingPortName OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm6 destination control multicast,The Port Number of rule"
|
|
::= { dcscm6dcPortbindingEntry 1 }
|
|
|
|
--xxx.100.21.5.1.2
|
|
dcscm6dcPortbindingAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0|9000..10999)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to port"
|
|
::= { dcscm6dcPortbindingEntry 2 }
|
|
|
|
--xxx.100.21.6 Dcscm6 sc
|
|
|
|
-- The Dcscm6 sc Enable Table
|
|
|
|
dcscm6scEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm6 source control multicast is disable or enable"
|
|
::= { dcscm6 6 }
|
|
|
|
--xxx.100.21.7
|
|
|
|
-- The DCSCM6 Sc Acl Table
|
|
|
|
dcscm6scAcl OBJECT IDENTIFIER ::= { dcscm6 7 }
|
|
|
|
--xxx.100.21.7.1
|
|
dcscm6scAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (8000..8099)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Acl number of Dcscm6 source control multicast.the range is 8000--8099"
|
|
::= { dcscm6scAcl 1 }
|
|
|
|
--xxx.100.21.7.2
|
|
dcscm6scAclSourceIp OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source ip address of acl entry "
|
|
::= { dcscm6scAcl 2}
|
|
|
|
--xxx.100.21.7.3
|
|
dcscm6scAclSourceMask OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source MaskLen of acl entry "
|
|
::= { dcscm6scAcl 3}
|
|
|
|
--xxx.100.21.7.4
|
|
dcscm6scAclDestinationIp OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination ip address of acl entry,the destination ip must be a valid multicast group address. "
|
|
::= { dcscm6scAcl 4}
|
|
|
|
--xxx.100.21.7.5
|
|
dcscm6scAclDestinationMask OBJECT-TYPE
|
|
SYNTAX INTEGER (8..128)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MaskLen of acl entry ,the mask length should meet the request of multicast group address."
|
|
::= { dcscm6scAcl 5}
|
|
|
|
--xxx.100.21.7.6
|
|
dcscm6scAclPermitOrDeny OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
permit(1),
|
|
deny(0),
|
|
deltheAcl(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" acl entry permit or deny; 0:deny; 1:permit; 2:del this acl"
|
|
::= { dcscm6scAcl 6}
|
|
|
|
--xxx.100.21.8
|
|
|
|
-- The DCSCM6 Sc Port Destination binding Table
|
|
|
|
dcscm6scPortbindingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dcscm6scPortbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm6 destination control multicast, Acl is binded to Port"
|
|
::= { dcscm6 8 }
|
|
--xxx.100.21.8.1
|
|
dcscm6scPortbindingEntry OBJECT-TYPE
|
|
SYNTAX Dcscm6scPortbindingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is PortName"
|
|
INDEX { dcscm6scPortbindingPortName }
|
|
::= { dcscm6scPortbindingTable 1 }
|
|
|
|
Dcscm6scPortbindingEntry
|
|
::= SEQUENCE
|
|
{
|
|
dcscm6scPortbindingPortName INTEGER,
|
|
dcscm6scPortbindingAclNumber INTEGER
|
|
}
|
|
|
|
--xxx.100.21.8.1.1
|
|
dcscm6scPortbindingPortName OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm6 source control multicast,The Port Number of rule"
|
|
::= { dcscm6scPortbindingEntry 1 }
|
|
|
|
--xxx.100.21.8.1.2
|
|
dcscm6scPortbindingAclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0|8000..8099)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Dcscm6 source control multicast,The Acl number of rule,0 means to del the rule binded to port"
|
|
::= { dcscm6scPortbindingEntry 2 }
|
|
|
|
--xxx.100.21.9
|
|
|
|
-- The DCSCM6 Policy multicast Table
|
|
|
|
dcscm6pcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dcscm6pcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"dcscm6 policy multicast table"
|
|
::= { dcscm6 9 }
|
|
--xxx.100.21.9.1
|
|
dcscm6pcEntry OBJECT-TYPE
|
|
SYNTAX Dcscm6pcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this table is dcscm6pcSourceIp,dcscm6pcSourceMask,dcscm6pcDestinationIp,dcscm6pcDestinationMask"
|
|
INDEX {dcscm6pcSourceIp,dcscm6pcSourceMask,dcscm6pcDestinationIp,dcscm6pcDestinationMask}
|
|
::= { dcscm6pcTable 1 }
|
|
|
|
Dcscm6pcEntry
|
|
::= SEQUENCE
|
|
{
|
|
dcscm6pcSourceIp Ipv6Address,
|
|
dcscm6pcSourceMask INTEGER,
|
|
dcscm6pcDestinationIp Ipv6Address,
|
|
dcscm6pcDestinationMask INTEGER,
|
|
dcscm6pccos INTEGER
|
|
}
|
|
|
|
--xxx.100.21.9.1.1
|
|
dcscm6pcSourceIp OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"source ip address of policy multicast "
|
|
::= { dcscm6pcEntry 1}
|
|
|
|
--xxx.100.21.9.1.2
|
|
dcscm6pcSourceMask OBJECT-TYPE
|
|
SYNTAX INTEGER (1..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Source MaskLen of policy multicast "
|
|
::= { dcscm6pcEntry 2}
|
|
|
|
--xxx.100.21.9.1.3
|
|
dcscm6pcDestinationIp OBJECT-TYPE
|
|
SYNTAX Ipv6Address
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination ip address of policy multicast "
|
|
::= { dcscm6pcEntry 3}
|
|
|
|
--xxx.100.21.9.1.4
|
|
dcscm6pcDestinationMask OBJECT-TYPE
|
|
SYNTAX INTEGER (8..128)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination MaskLen of policy multicast "
|
|
::= { dcscm6pcEntry 4}
|
|
|
|
--xxx.100.21.9.1.5
|
|
dcscm6pccos OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" cos value of policy multicast; between 0 and 7 ;8 means to del the policy"
|
|
::= { dcscm6pcEntry 5}
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.22.1
|
|
clusterv2Base OBJECT IDENTIFIER ::= { prClusterv2 1 }
|
|
|
|
--xxx.100.22.1.1
|
|
clusterv2BaseKey OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"cluster run switch,set the key word only while the cluster is not running
|
|
and you should set it with set clusterv2BaseRun."
|
|
::= { clusterv2Base 1 }
|
|
|
|
--xxx.100.22.1.2
|
|
clusterv2BaseVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"cluster run switch,set the Vlan only when the cluster is not running
|
|
and you should set it with set clusterv2BaseRun.
|
|
if get result is 0 that the cluser is not running!"
|
|
::= { clusterv2Base 2 }
|
|
|
|
--xxx.100.22.1.3
|
|
clusterv2BaseRun OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"cluster run switch,set the key word and vlan id or stop the cluster."
|
|
::= { clusterv2Base 3 }
|
|
|
|
--xxx.100.22.1.4
|
|
clusterv2BaseRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
candidateDevice(1),
|
|
memberDevice(2),
|
|
commanderDevice(3),
|
|
none(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The role of the device.
|
|
none means cluster device isn't running."
|
|
::= { clusterv2Base 4 }
|
|
|
|
--xxx.100.22.1.5
|
|
clusterv2BaseVersion OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"version of cluster."
|
|
::= { clusterv2Base 5 }
|
|
|
|
--xxx.100.22.1.6
|
|
clusterv2BaseMaxNumberOfMembers OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of cluster members allowed in the
|
|
cluster. The command switch is considered as a cluster
|
|
member also."
|
|
::= { clusterv2Base 6 }
|
|
|
|
--xxx.100.22.1.7
|
|
clusterv2BaseMaxNumberOfSwitches OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of cluster switches allowed in the
|
|
cluster. The Candidates include commander,candidate and member."
|
|
::= { clusterv2Base 7 }
|
|
|
|
--xxx.100.22.2
|
|
clusterv2Create OBJECT IDENTIFIER ::= { prClusterv2 2 }
|
|
|
|
--xxx.100.22.2.1
|
|
clusterv2CreateIPPool OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ip pool.Valid cluster ip-pool format like as 10.x.x.x,default is 10.254.254.1 .
|
|
if get result is 0 that the cluser is not running!
|
|
set it only on the device is not commander and should set it with set clusterv2CreateCmdrOperate."
|
|
::= { clusterv2Create 1}
|
|
|
|
--xxx.100.22.2.2
|
|
clusterv2CreateName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"create the clustername while create the cluster commander,
|
|
set it only on the device is not commander and should set it with set clusterv2CreateCmdrOperate."
|
|
::= { clusterv2Create 2}
|
|
|
|
--xxx.100.22.2.3
|
|
clusterv2CreateCmdrOperate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
create(1),
|
|
destroy(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"if set create ,operation is to build cluster according to clusterv2CreateClusterIPPool/clusterv2StatusClusterName.
|
|
if set destroy , operation is try to clear the IPPool and the ClusterName.
|
|
set create only on the device is not commander.
|
|
set destroy only on the device is commander."
|
|
::= { clusterv2Create 3}
|
|
|
|
--xxx.100.22.3
|
|
clusterv2Status OBJECT IDENTIFIER ::= { prClusterv2 3 }
|
|
|
|
--xxx.100.22.3.1
|
|
clusterv2StatusClusterName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the cluster.Set only on the device is not commander.The default is NULL."
|
|
::= { clusterv2Status 1 }
|
|
|
|
--xxx.100.22.3.2
|
|
clusterv2StatusKeepalive OBJECT-TYPE
|
|
SYNTAX INTEGER (3..30)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"cluster keepalive interval(3-30 second).
|
|
if get result is 0 that the cluser is not running!"
|
|
::= { clusterv2Status 2 }
|
|
|
|
--xxx.100.22.3.3
|
|
clusterv2StatusLoss-count OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"cluster the max(1-10) loss-count packet during the keeplive interval.
|
|
if get result is 0 that the cluser is not running!"
|
|
::= { clusterv2Status 3}
|
|
|
|
--xxx.100.22.4
|
|
clusterv2Commander OBJECT IDENTIFIER ::= { prClusterv2 4 }
|
|
|
|
--xxx.100.22.4.1
|
|
clusterv2CommanderAutoAddMem OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"auto add mem switch"
|
|
::= { clusterv2Commander 1 }
|
|
|
|
--xxx.100.22.4.2
|
|
clusterv2MemberCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"member number on commander,read only on commander or will return 65535."
|
|
::= { clusterv2Commander 2 }
|
|
|
|
--xxx.100.22.4.3
|
|
clusterv2MemberTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Clusterv2MemberEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per cluster member,
|
|
including the command switch,read only on commander."
|
|
::= { clusterv2Commander 3 }
|
|
--xxx.100.22.4.3.1
|
|
clusterv2MemberEntry OBJECT-TYPE
|
|
SYNTAX Clusterv2MemberEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing cluster management information
|
|
applicable to a particular cluster member."
|
|
INDEX { clusterv2MemberNumber }
|
|
::= { clusterv2MemberTable 1 }
|
|
|
|
Clusterv2MemberEntry ::=
|
|
SEQUENCE {
|
|
clusterv2MemberNumber INTEGER,
|
|
clusterv2MemberIpAddress IpAddress,
|
|
clusterv2MemberMacAddress MacAddress,
|
|
clusterv2MemberOperStatus INTEGER,
|
|
clusterv2MemberHostName OCTET STRING,
|
|
clusterv2MemberDeviceType OCTET STRING
|
|
}
|
|
|
|
--xxx.100.22.4.3.1.1
|
|
clusterv2MemberNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary value which uniquely identifies the
|
|
cluster member switch number. It ranges from 1 to
|
|
clusterv2StatusMaxNumberOfMembers,read only on commander."
|
|
::= { clusterv2MemberEntry 1 }
|
|
|
|
--xxx.100.22.4.3.1.2
|
|
clusterv2MemberIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management ip address of the member device."
|
|
::= { clusterv2MemberEntry 2 }
|
|
|
|
--xxx.100.22.4.3.1.3
|
|
clusterv2MemberOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notMember(1),
|
|
inactiveMember(2),
|
|
memberTobe(3),
|
|
activeMember(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of cluster management connectivity between
|
|
the command switch and a cluster member. Cluster management
|
|
connectivity is determined by the exchange of cluster
|
|
management messages between the command switch and a
|
|
cluster member."
|
|
::= { clusterv2MemberEntry 3 }
|
|
|
|
--xxx.100.22.4.3.1.4
|
|
clusterv2MemberMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management MAC address of the member device."
|
|
::= { clusterv2MemberEntry 4 }
|
|
|
|
--xxx.100.22.4.3.1.5
|
|
clusterv2MemberHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { clusterv2MemberEntry 5 }
|
|
|
|
--xxx.100.22.4.3.1.6
|
|
clusterv2MemberDeviceType OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"deviceType such as 5526S, 2008A etc"
|
|
::= { clusterv2MemberEntry 6 }
|
|
|
|
--The Cluster Candidate Table
|
|
--xxx.100.22.4.4
|
|
clusterv2CandidateCounter OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"candidate number on commander,read only on commander or will return 65535."
|
|
::= { clusterv2Commander 4 }
|
|
--xxx.100.22.4.5
|
|
clusterv2CandidateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Clusterv2CandidateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one row per cluster candidate,
|
|
A cluster candidate is a device that is currently
|
|
eligible to be added to the cluster of a command
|
|
switch. A device is eligible if it satisfies the
|
|
following conditions:
|
|
1. It start the cluster func.
|
|
2. It is in a same L2 LAN with commander switch
|
|
|
|
The entries in this table and the entries in
|
|
clusterMemberTable are mutually exclusive at all
|
|
times. That is, any device that is a cluster
|
|
member never shows up in the clusterCandidateTable
|
|
or is never a candidate at the same time . Also, any
|
|
candidate that shows up in clusterCandidateTable should not
|
|
appear in clusterMemberTable."
|
|
::= { clusterv2Commander 5 }
|
|
|
|
--xxx.100.22.4.5.1
|
|
clusterv2CandidateEntry OBJECT-TYPE
|
|
SYNTAX Clusterv2CandidateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry pertaining to a single candidate device."
|
|
INDEX { clusterv2CandidateId }
|
|
::= { clusterv2CandidateTable 1 }
|
|
|
|
Clusterv2CandidateEntry ::= SEQUENCE {
|
|
clusterv2CandidateId INTEGER,
|
|
clusterv2CandidateMacAddress MacAddress,
|
|
clusterv2CandidateHostName OCTET STRING,
|
|
clusterv2CandidateDeviceType OCTET STRING
|
|
}
|
|
|
|
--xxx.100.22.4.5.1.1
|
|
clusterv2CandidateId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The candidate id."
|
|
::= { clusterv2CandidateEntry 1 }
|
|
|
|
|
|
--xxx.100.22.4.5.1.2
|
|
clusterv2CandidateMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress (SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of a device qualified to
|
|
to be a cluster member of the command switch
|
|
cluster."
|
|
::= { clusterv2CandidateEntry 2 }
|
|
|
|
--xxx.100.22.4.5.1.3
|
|
clusterv2CandidateHostName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { clusterv2CandidateEntry 3 }
|
|
|
|
--xxx.100.22.4.5.1.4
|
|
clusterv2CandidateDeviceType OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
""
|
|
::= { clusterv2CandidateEntry 4 }
|
|
|
|
|
|
--xxx.100.22.4.6
|
|
clusterv2RebootMem OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..30))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operation is to reboot the specified member.you can select more member one time,
|
|
the value connected with '-' or ';',the string len is 1-30 .set only on commander."
|
|
::= { clusterv2Commander 6}
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
--xxx.100.23 Dns group
|
|
|
|
--xxx.100.23.1
|
|
dnsEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable dns dynamic domain resolving."
|
|
::= {dns 1 }
|
|
|
|
--xxx.100.23.2
|
|
|
|
-- The DNS Server List Table
|
|
|
|
dnsServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DnsServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dns server list table which consists of a sequence of 'dnsServerEntry' items which describe
|
|
the configured dns server IP information."
|
|
::= { dns 2 }
|
|
|
|
--xxx.100.23.2.1
|
|
dnsServerEntry OBJECT-TYPE
|
|
SYNTAX DnsServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the dnsServerTable containing the dns server IP."
|
|
INDEX { dnsServerInetAddrType,dnsServerIpAddr }
|
|
::= {dnsServerTable 1 }
|
|
|
|
DnsServerEntry
|
|
::= SEQUENCE
|
|
{
|
|
dnsServerInetAddrType InetAddressType,
|
|
dnsServerIpAddr InetAddress,
|
|
dnsServerPriority INTEGER,
|
|
dnsServerStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.23.2.1.1
|
|
dnsServerInetAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address type of dnsServerEntry. This value applies to dnsServerIpAddr."
|
|
::= { dnsServerEntry 1 }
|
|
|
|
--xxx.100.23.2.1.2
|
|
dnsServerIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dns server IP address with 'dnsServerInetAddrType' to indicate the IP address type(IPv4 or IPv6)."
|
|
::= { dnsServerEntry 2}
|
|
|
|
--xxx.100.23.2.1.3
|
|
dnsServerPriority OBJECT-TYPE
|
|
SYNTAX INTEGER(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current Priority of the dns server."
|
|
::= { dnsServerEntry 3 }
|
|
|
|
--xxx.100.23.2.1.4
|
|
dnsServerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current state of the dns server."
|
|
::= { dnsServerEntry 4 }
|
|
|
|
--xxx.100.23.3
|
|
|
|
-- The DNS Domain Suffix Table
|
|
|
|
dnsDomainSuffixTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DnsDomainSuffixEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dns domain suffix table which consists of a sequence of 'dnsDomainSuffixEntry' items which describe
|
|
the configured dns domain suffix information."
|
|
::= { dns 3 }
|
|
|
|
--xxx.100.23.3.1
|
|
dnsDomainSuffixEntry OBJECT-TYPE
|
|
SYNTAX DnsDomainSuffixEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the dnsDomainSuffixTable containing the dns domain suffix."
|
|
INDEX { dnsDomainSuffix }
|
|
::= { dnsDomainSuffixTable 1 }
|
|
|
|
DnsDomainSuffixEntry
|
|
::= SEQUENCE
|
|
{
|
|
dnsDomainSuffix DisplayString,
|
|
dnsDomainSuffixStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.23.3.1.1
|
|
dnsDomainSuffix OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dns domain suffix(e.g. commpany.com)."
|
|
::= { dnsDomainSuffixEntry 1 }
|
|
|
|
--xxx.100.23.3.1.2
|
|
dnsDomainSuffixStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
createAndGo(0),
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current state of the dns domain suffix."
|
|
::= { dnsDomainSuffixEntry 2 }
|
|
|
|
--xxx.100.23.4
|
|
|
|
-- The DNS Dynamic Host Table
|
|
|
|
dnsDynHostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DnsDynHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dns dynamic host table which consists of a sequence of 'dnsDynHostEntry' items which describe
|
|
the resolved dns dynamic host information."
|
|
::= { dns 4 }
|
|
|
|
--xxx.100.23.4.1
|
|
dnsDynHostEntry OBJECT-TYPE
|
|
SYNTAX DnsDynHostEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the dnsDynHostTable containing the dns dynamic host information."
|
|
INDEX { dnsDynHostIndex }
|
|
::= { dnsDynHostTable 1 }
|
|
|
|
DnsDynHostEntry
|
|
::= SEQUENCE
|
|
{
|
|
dnsDynHostIndex INTEGER,
|
|
dnsDynHostName DisplayString,
|
|
dnsDynHostIpAddr InetAddress,
|
|
dnsDynHostTtl INTEGER
|
|
}
|
|
|
|
--xxx.100.23.4.1.1
|
|
dnsDynHostIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of position in the cache "
|
|
::= { dnsDynHostEntry 1 }
|
|
|
|
|
|
--xxx.100.23.4.1.2
|
|
dnsDynHostName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dns dynamic host name(e.g. www.sina.com.cn)."
|
|
::= { dnsDynHostEntry 2 }
|
|
|
|
--xxx.100.23.4.1.3
|
|
dnsDynHostIpAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dns dynamic host's IP address with 'dnsDynHostInetAddrType' to indicate the IP address type(IPv4 or IPv6)."
|
|
::= { dnsDynHostEntry 3}
|
|
|
|
--xxx.100.23.4.1.4
|
|
dnsDynHostTtl OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The dns dynamic host's living time(seconds)."
|
|
::= { dnsDynHostEntry 4}
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P C O N F I G
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
|
|
lldpMessageTxInterval OBJECT-TYPE
|
|
SYNTAX Integer32(5..32768)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval at which LLDP frames are transmitted on
|
|
behalf of this LLDP agent.
|
|
|
|
The default value for lldpMessageTxInterval object is
|
|
30 seconds.
|
|
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.3.3"
|
|
DEFVAL { 30 }
|
|
::= { lldpConfiguration 1 }
|
|
|
|
lldpMessageTxHoldMultiplier OBJECT-TYPE
|
|
SYNTAX Integer32(2..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-to-live value expressed as a multiple of the
|
|
lldpMessageTxInterval object. The actual time-to-live value
|
|
used in LLDP frames, transmitted on behalf of this LLDP agent,
|
|
can be expressed by the following formula: TTL = min(65535,
|
|
(lldpMessageTxInterval * lldpMessageTxHoldMultiplier)) For
|
|
example, if the value of lldpMessageTxInterval is '30', and
|
|
the value of lldpMessageTxHoldMultiplier is '4', then the
|
|
value '120' is encoded in the TTL field in the LLDP header.
|
|
|
|
The default value for lldpMessageTxHoldMultiplier object is 4.
|
|
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.3.3"
|
|
DEFVAL { 4 }
|
|
::= { lldpConfiguration 2 }
|
|
|
|
|
|
lldpTxDelay OBJECT-TYPE
|
|
SYNTAX Integer32(1..8192)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lldpTxDelay indicates the delay (in units
|
|
of seconds) between successive LLDP frame transmissions
|
|
initiated by value/status changes in the LLDP local systems
|
|
MIB. The recommended value for the lldpTxDelay is set by the
|
|
following formula:
|
|
|
|
1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)
|
|
|
|
The default value for lldpTxDelay object is 2 seconds.
|
|
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.3.3"
|
|
DEFVAL { 2 }
|
|
::= { lldpConfiguration 4 }
|
|
|
|
lldpNotificationInterval OBJECT-TYPE
|
|
SYNTAX Integer32(5..3600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the transmission of LLDP notifications.
|
|
|
|
the agent must not generate more than one lldpRemTablesChange
|
|
notification-event in the indicated period, where a
|
|
'notification-event' is the transmission of a single
|
|
notification PDU type to a list of notification destinations.
|
|
If additional changes in lldpRemoteSystemsData object
|
|
groups occur within the indicated throttling period,
|
|
then these trap- events must be suppressed by the
|
|
agent. An NMS should periodically check the value of
|
|
lldpStatsRemTableLastChangeTime to detect any missed
|
|
lldpRemTablesChange notification-events, e.g. due to
|
|
throttling or transmission loss.
|
|
|
|
If notification transmission is enabled for particular ports,
|
|
the suggested default throttling period is 5 seconds.
|
|
|
|
The value of this object must be restored from non-volatile
|
|
storage after a re-initialization of the management system."
|
|
DEFVAL { 5 }
|
|
::= { lldpConfiguration 5 }
|
|
|
|
--
|
|
-- lldpPortConfigTable: LLDP configuration on a per port basis
|
|
--
|
|
|
|
lldpPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table that controls LLDP frame transmission on individual
|
|
ports."
|
|
::= { lldpConfiguration 6 }
|
|
|
|
lldpPortConfigEntry OBJECT-TYPE
|
|
SYNTAX LldpPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP configuration information for a particular port.
|
|
This configuration parameter controls the transmission and
|
|
the reception of LLDP frames on those ports whose rows are
|
|
created in this table."
|
|
INDEX { lldpPortConfigPortNum }
|
|
::= { lldpPortConfigTable 1 }
|
|
|
|
LldpPortConfigEntry ::= SEQUENCE {
|
|
lldpPortConfigPortNum LldpPortNumber,
|
|
lldpPortConfigAdminStatus INTEGER,
|
|
lldpPortConfigNotificationEnable INTEGER,
|
|
lldpPortConfigTLVsTxEnable INTEGER }
|
|
|
|
lldpPortConfigPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry.
|
|
|
|
The value of this object is used as a port index to the
|
|
lldpPortConfigTable."
|
|
::= { lldpPortConfigEntry 1 }
|
|
|
|
lldpPortConfigAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
txOnly(1),
|
|
rxOnly(2),
|
|
txAndRx(3),
|
|
disabled(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administratively desired status of the local LLDP agent.
|
|
|
|
If the associated lldpPortConfigAdminStatus object has a
|
|
value of 'txOnly(1)', then LLDP agent will transmit LLDP
|
|
frames on this port and it will not store any information
|
|
about the remote systems connected.
|
|
|
|
If the associated lldpPortConfigAdminStatus object has a
|
|
value of 'rxOnly(2)', then the LLDP agent will receive,
|
|
but it will not transmit LLDP frames on this port.
|
|
|
|
If the associated lldpPortConfigAdminStatus object has a
|
|
value of 'txAndRx(3)', then the LLDP agent will transmit
|
|
and receive LLDP frames on this port.
|
|
|
|
If the associated lldpPortConfigAdminStatus object has a
|
|
value of 'disabled(0)', then LLDP agent will not transmit or
|
|
receive LLDP frames on this port. If there is remote systems
|
|
information which is received on this port and stored in
|
|
other tables, before the port's lldpPortConfigAdminStatus
|
|
becomes disabled, then the information will naturally age out."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.1"
|
|
DEFVAL { txAndRx }
|
|
::= { lldpPortConfigEntry 2 }
|
|
|
|
lldpPortConfigNotificationEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lldpPortConfigNotificationEnable controls, on a per
|
|
port basis, whether or not notifications from the agent
|
|
are enabled. The value true(1) means that notifications are
|
|
enabled; the value false(0) means that they are not."
|
|
DEFVAL { false }
|
|
::= { lldpPortConfigEntry 3 }
|
|
|
|
lldpPortConfigTLVsTxEnable OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
-- "The lldpPortConfigTLVsTxEnable, defined as a bitmap,
|
|
-- includes the basic set of LLDP TLVs whose transmission is
|
|
-- allowed on the local LLDP agent by the network management.
|
|
-- Each bit in the bitmap corresponds to a TLV type associated
|
|
-- with a specific optional TLV.
|
|
--
|
|
-- It should be noted that the organizationally defined TLVs
|
|
-- are excluded from the lldpTLVsTxEnable bitmap.
|
|
--
|
|
-- LLDP Organization Specific Information Extension MIBs should
|
|
-- have similar configuration object to control transmission
|
|
-- of their organizationally defined TLVs.
|
|
--
|
|
-- The bit 'portDesc(0)' indicates that LLDP agent should
|
|
-- transmit 'Port Description TLV'.
|
|
--
|
|
-- The bit 'sysName(1)' indicates that LLDP agent should transmit
|
|
-- 'System Name TLV'.
|
|
--
|
|
-- The bit 'sysDesc(2)' indicates that LLDP agent should transmit
|
|
-- 'System Description TLV'.
|
|
--
|
|
-- The bit 'sysCap(3)' indicates that LLDP agent should transmit
|
|
-- 'System Capabilities TLV'.
|
|
--
|
|
-- There is no bit reserved for the management address TLV type
|
|
-- since transmission of management address TLVs are controlled
|
|
-- by another object, lldpConfigManAddrTable.
|
|
--
|
|
-- The default value for lldpPortConfigTLVsTxEnable object is
|
|
-- empty set, which means no enumerated values are set.
|
|
--
|
|
-- The value of this object must be restored from non-volatile
|
|
-- storage after a re-initialization of the management system."
|
|
"
|
|
The value '1' indicates that LLDP agent should transmit 'Port Description TLV'.
|
|
|
|
The value '2' indicates that LLDP agent should transmit 'System Name TLV'.
|
|
|
|
The value '3' indicates that LLDP agent should transmit 'Port Description and System Name TLV'.
|
|
|
|
The value '4' indicates that LLDP agent should transmit 'System Description TLV'.
|
|
|
|
The value '5' indicates that LLDP agent should transmit 'Port Description and System Description TLV'.
|
|
|
|
The value '6' indicates that LLDP agent should transmit 'System Name and System Description TLV'.
|
|
|
|
The value '7' indicates that LLDP agent should transmit 'Port Description,System Name and System Description TLV'.
|
|
|
|
The value '8' indicates that LLDP agent should transmit 'System Capabilities TLV'.
|
|
|
|
The value '9' indicates that LLDP agent should transmit 'Port Description and System Capabilities TLV'.
|
|
|
|
The value '10' indicates that LLDP agent should transmit 'System Name and System Capabilities TLV'.
|
|
|
|
The value '11' indicates that LLDP agent should transmit 'Port Description,System Name and System Capabilities TLV'.
|
|
|
|
The value '12' indicates that LLDP agent should transmit 'System Description and System Capabilities TLV'.
|
|
|
|
The value '13' indicates that LLDP agent should transmit 'Port Description,System Description and System Capabilities TLV'.
|
|
|
|
The value '14' indicates that LLDP agent should transmit 'System Name,System Description and System Capabilities TLV'.
|
|
|
|
The value '15' indicates that LLDP agent should transmit 'Port Description,System Name,System Description and System Capabilities TLV'."
|
|
-- DEFVAL { { } }
|
|
::= { lldpPortConfigEntry 4 }
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P S T A T S
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- LLDP Stats Group
|
|
|
|
lldpStatsRemTablesLastChangeTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime object (defined in IETF RFC 3418)
|
|
at the time an entry is created, modified, or deleted in the
|
|
in tables associated with the lldpRemoteSystemsData objects
|
|
and all LLDP extension objects associated with remote systems.
|
|
|
|
An NMS can use this object to reduce polling of the
|
|
lldpRemoteSystemsData objects."
|
|
::= { lldpStatistics 1 }
|
|
|
|
lldpStatsRemTablesInserts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "table entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an entry has been inserted into tables
|
|
associated with the lldpRemoteSystemsData objects and all
|
|
LLDP extension objects associated with remote systems."
|
|
::= { lldpStatistics 2 }
|
|
|
|
lldpStatsRemTablesDeletes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "table entries"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
DESCRIPTION
|
|
"The number of times an entry has been deleted from tables
|
|
associated with the lldpRemoteSystemsData objects and all
|
|
LLDP extension objects associated with remote systems."
|
|
::= { lldpStatistics 3 }
|
|
|
|
lldpStatsRemTablesDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "table entries"
|
|
MAX-ACCESS read-only
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times a new entry could not be created in the
|
|
tables associated with the lldpRemoteSystemsData objects
|
|
and all LLDP extension objects associated with the remote
|
|
systems because of insufficient resources."
|
|
::= { lldpStatistics 4 }
|
|
|
|
lldpStatsRemTablesAgeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an entry has been deleted from tables
|
|
associated with the lldpRemoteSystemsData objects and all
|
|
LLDP extension objects associated with remote systems because
|
|
the information timeliness interval for those entries have
|
|
expired."
|
|
::= { lldpStatistics 5 }
|
|
|
|
lldpStatsPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpStatsPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing LLDP statistics for individual ports.
|
|
Entries are not required to exist in this table while the
|
|
lldpPortConfigEntry object is equal to 'disabled(0)'."
|
|
::= { lldpStatistics 6 }
|
|
|
|
lldpStatsPortEntry OBJECT-TYPE
|
|
SYNTAX LldpStatsPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"LLDP frame statistics for a particular port. The port
|
|
must be contained in the same chassis as the LLDP agent.
|
|
|
|
All counter values in a particular entry shall be
|
|
maintained on a continuing basis and shall not be deleted
|
|
upon expiration of rxInfoTTL timing counters in the LLDP
|
|
remote systems MIB of the receipt of a shutdown frame from
|
|
a remote LLDP agent.
|
|
|
|
All statistical counters associated with a particular
|
|
port on the local LLDP agent become frozen whenever the
|
|
adminStatus is disabled for the same port."
|
|
INDEX { lldpStatsPortNum }
|
|
::= { lldpStatsPortTable 1 }
|
|
|
|
LldpStatsPortEntry ::= SEQUENCE {
|
|
lldpStatsPortNum LldpPortNumber,
|
|
lldpStatsPortFramesDiscardedTotal Counter32,
|
|
lldpStatsPortFramesInErrors Counter32,
|
|
lldpStatsPortFramesInTotal Counter32,
|
|
lldpStatsPortFramesOutTotal Counter32,
|
|
lldpStatsPortTLVsDiscardedTotal Counter32,
|
|
lldpStatsPortTLVsUnrecognizedTotal Counter32,
|
|
lldpStatsPortAgeouts Counter32
|
|
}
|
|
|
|
lldpStatsPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry.
|
|
|
|
The value of this object is used as a port index to the
|
|
lldpStatsTable."
|
|
::= { lldpStatsPortEntry 1 }
|
|
|
|
lldpStatsPortFramesDiscardedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP frames received by this LLDP agent on
|
|
the indicated port, and then discarded for any reason.
|
|
This counter can provide an indication that LLDP header
|
|
formating problems may exist with the local LLDP agent in
|
|
the sending system or that LLDPDU validation problems may
|
|
exist with the local LLDP agent in the receiving system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.2"
|
|
::= { lldpStatsPortEntry 2 }
|
|
|
|
lldpStatsPortFramesInErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of invalid LLDP frames received by this LLDP
|
|
agent on the indicated port, while this LLDP agent is enabled."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.2"
|
|
::= { lldpStatsPortEntry 3 }
|
|
|
|
lldpStatsPortFramesInTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid LLDP frames received by this LLDP agent
|
|
on the indicated port, while this LLDP agent is enabled."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.2"
|
|
::= { lldpStatsPortEntry 4 }
|
|
|
|
lldpStatsPortFramesOutTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP frames transmitted by this LLDP agent
|
|
on the indicated port."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.2"
|
|
::= { lldpStatsPortEntry 5 }
|
|
|
|
lldpStatsPortTLVsDiscardedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP TLVs discarded for any reason by this LLDP
|
|
agent on the indicated port."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.2"
|
|
::= { lldpStatsPortEntry 6 }
|
|
|
|
lldpStatsPortTLVsUnrecognizedTotal OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of LLDP TLVs received on the given port that
|
|
are not recognized by this LLDP agent on the indicated port.
|
|
|
|
An unrecognized TLV is referred to as the TLV whose type value
|
|
is in the range of reserved TLV types (000 1001 - 111 1110)
|
|
in Table 9.1 of the IEEE Std. 802.1AB-2004. An unrecognized
|
|
TLV may be a basic management TLV from a later LLDP version."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.2"
|
|
::= { lldpStatsPortEntry 7 }
|
|
|
|
lldpStatsPortAgeouts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The counter that represents the number of age-outs occurred
|
|
on a given port. An age-out is referred to as the number
|
|
of times an entry has been deleted from tables associated
|
|
with the lldpRemoteSystemsData objects and all LLDP extension
|
|
objects associated with remote systems because the information
|
|
timeliness interval for those entries have expired.
|
|
|
|
This counter is similar to lldpStatsRemTablesNumAgeouts,
|
|
except that the counter is on a per port basis. This enables
|
|
NMS to poll tables associated with the lldpRemoteSystemsData
|
|
objects and all LLDP extension objects associated with remote
|
|
systems on the indicated port only."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.5.2"
|
|
::= { lldpStatsPortEntry 9 }
|
|
|
|
|
|
-- ***********************************************************
|
|
--
|
|
-- L O C A L S Y S T E M D A T A
|
|
--
|
|
-- ***********************************************************
|
|
|
|
lldpLocChassisType OBJECT-TYPE
|
|
SYNTAX LldpChassisIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of encoding used to identify the chassis
|
|
associated with the local system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.2.2"
|
|
::= { lldpLocalSystemData 1 }
|
|
|
|
lldpLocChassisId OBJECT-TYPE
|
|
SYNTAX LldpChassisId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the chassis component
|
|
associated with the local system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.2.3"
|
|
::= { lldpLocalSystemData 2 }
|
|
|
|
lldpLocSysName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system name of the
|
|
local system. If the local agent supports IETF RFC 3418,
|
|
lldpLocSysName object should have the same value of sysName
|
|
object."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.6.2"
|
|
::= { lldpLocalSystemData 3 }
|
|
|
|
lldpLocSysDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system description
|
|
of the local system. If the local agent supports IETF RFC 3418,
|
|
lldpLocSysDesc object should have the same value of sysDesc
|
|
object."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.7.2"
|
|
::= { lldpLocalSystemData 4 }
|
|
|
|
lldpLocSysCapSupported OBJECT-TYPE
|
|
SYNTAX LldpSystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are supported on the local system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.8.1"
|
|
::= { lldpLocalSystemData 5 }
|
|
|
|
lldpLocSysCapEnabled OBJECT-TYPE
|
|
SYNTAX LldpSystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are enabled on the local system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.8.2"
|
|
::= { lldpLocalSystemData 6 }
|
|
|
|
|
|
--
|
|
-- lldpLocPortTable : Port specific Local system data
|
|
--
|
|
|
|
lldpLocPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpLocPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one or more rows per port information
|
|
associated with the local system known to this agent."
|
|
::= { lldpLocalSystemData 7 }
|
|
|
|
lldpLocPortEntry OBJECT-TYPE
|
|
SYNTAX LldpLocPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular port component.
|
|
|
|
Entries may be created and deleted in this table by the
|
|
agent."
|
|
INDEX { lldpLocPortNum }
|
|
::= { lldpLocPortTable 1 }
|
|
|
|
LldpLocPortEntry ::= SEQUENCE {
|
|
lldpLocPortNum LldpPortNumber,
|
|
lldpLocPortSubtype LldpPortIdSubtype,
|
|
lldpLocPortId LldpPortId,
|
|
lldpLocPortDesc SnmpAdminString
|
|
}
|
|
|
|
lldpLocPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry.
|
|
|
|
The value of this object is used as a port index to the
|
|
lldpLocPortTable."
|
|
::= { lldpLocPortEntry 1 }
|
|
|
|
lldpLocPortSubtype OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of port identifier encoding used in the associated
|
|
'lldpLocPortId' object."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.3.2"
|
|
::= { lldpLocPortEntry 2 }
|
|
|
|
lldpLocPortId OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the port component
|
|
associated with a given port in the local system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.3.3"
|
|
::= { lldpLocPortEntry 3 }
|
|
|
|
lldpLocPortDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the 802 LAN station's port
|
|
description associated with the local system. If the local
|
|
agent supports IETF RFC 2863, lldpLocPortDesc object should
|
|
have the same value of ifDescr object."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.5.2"
|
|
::= { lldpLocPortEntry 4 }
|
|
|
|
-- ***********************************************************
|
|
--
|
|
-- R E M O T E S Y S T E M S D A T A
|
|
--
|
|
-- ***********************************************************
|
|
|
|
lldpRemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpRemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains one or more rows per physical network
|
|
connection known to this agent. The agent may wish to ensure
|
|
that only one lldpRemEntry is present for each local port,
|
|
or it may choose to maintain multiple lldpRemEntries for
|
|
the same local port."
|
|
::= { lldpRemoteSystemsData 1 }
|
|
|
|
lldpRemEntry OBJECT-TYPE
|
|
SYNTAX LldpRemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about a particular physical network connection.
|
|
Entries may be created and deleted in this table by the agent,
|
|
if a physical topology discovery process is active."
|
|
INDEX {lldpRemLocalPortNum,lldpRemIndex }
|
|
::= { lldpRemTable 1 }
|
|
|
|
LldpRemEntry ::= SEQUENCE {
|
|
lldpRemLocalPortNum LldpPortNumber,
|
|
lldpRemIndex Integer32,
|
|
lldpRemChassisIdSubtype LldpChassisIdSubtype,
|
|
lldpRemChassisId LldpChassisId,
|
|
lldpRemPortIdSubtype LldpPortIdSubtype,
|
|
lldpRemPortId LldpPortId,
|
|
lldpRemPortDesc SnmpAdminString,
|
|
lldpRemSysName SnmpAdminString,
|
|
lldpRemSysDesc SnmpAdminString,
|
|
lldpRemSysCapSupported LldpSystemCapabilitiesMap,
|
|
lldpRemSysCapEnabled LldpSystemCapabilitiesMap,
|
|
lldpRemTimeMark TimeFilter
|
|
}
|
|
|
|
lldpRemLocalPortNum OBJECT-TYPE
|
|
SYNTAX LldpPortNumber
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value used to identify the port component
|
|
(contained in the local chassis with the LLDP agent)
|
|
associated with this entry. The lldpRemLocalPortNum
|
|
identifies the port on which the remote system information
|
|
is received.
|
|
|
|
The value of this object is used as a port index to the
|
|
lldpRemTable."
|
|
::= { lldpRemEntry 1 }
|
|
|
|
lldpRemIndex OBJECT-TYPE
|
|
SYNTAX Integer32(1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents an arbitrary local integer value used
|
|
by this agent to identify a particular connection instance,
|
|
unique only for the indicated remote system.
|
|
|
|
An agent is encouraged to assign monotonically increasing
|
|
index values to new entries, starting with one, after each
|
|
reboot. It is considered unlikely that the lldpRemIndex
|
|
will wrap between reboots."
|
|
::= { lldpRemEntry 2 }
|
|
|
|
lldpRemChassisIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpChassisIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of encoding used to identify the chassis associated
|
|
with the remote system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.2.2"
|
|
::= { lldpRemEntry 3 }
|
|
|
|
lldpRemChassisId OBJECT-TYPE
|
|
SYNTAX LldpChassisId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the chassis component
|
|
associated with the remote system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.2.3"
|
|
::= { lldpRemEntry 4 }
|
|
|
|
lldpRemPortIdSubtype OBJECT-TYPE
|
|
SYNTAX LldpPortIdSubtype
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of port identifier encoding used in the associated
|
|
'lldpRemPortId' object."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.3.2"
|
|
::= { lldpRemEntry 5 }
|
|
|
|
lldpRemPortId OBJECT-TYPE
|
|
SYNTAX LldpPortId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the port component
|
|
associated with the remote system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.3.3"
|
|
::= { lldpRemEntry 6 }
|
|
|
|
lldpRemPortDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the description of
|
|
the given port associated with the remote system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.5.2"
|
|
::= { lldpRemEntry 7 }
|
|
|
|
lldpRemSysName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system name of the
|
|
remote system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.6.2"
|
|
::= { lldpRemEntry 8 }
|
|
|
|
lldpRemSysDesc OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The string value used to identify the system description
|
|
of the remote system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.7.2"
|
|
::= { lldpRemEntry 9 }
|
|
|
|
lldpRemSysCapSupported OBJECT-TYPE
|
|
SYNTAX LldpSystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are supported on the remote system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.8.1"
|
|
::= { lldpRemEntry 10 }
|
|
|
|
lldpRemSysCapEnabled OBJECT-TYPE
|
|
SYNTAX LldpSystemCapabilitiesMap
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The bitmap value used to identify which system capabilities
|
|
are enabled on the remote system."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 9.4.8.2"
|
|
::= { lldpRemEntry 11 }
|
|
|
|
lldpRemTimeMark OBJECT-TYPE
|
|
SYNTAX TimeFilter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A TimeFilter for this entry. See the TimeFilter textual
|
|
convention in IETF RFC 2021 and
|
|
http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt
|
|
to see how TimeFilter works."
|
|
REFERENCE
|
|
"IETF RFC 2021 section 6"
|
|
::= { lldpRemEntry 12 }
|
|
|
|
--
|
|
-- lldpRemUnknownTLVTable : Unrecognized TLV information
|
|
--
|
|
lldpRemUnknownTLVTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LldpRemUnknownTLVEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains information about an incoming TLV which
|
|
is not recognized by the receiving LLDP agent. The TLV may
|
|
be from a later version of the basic management set.
|
|
|
|
This table should only contain TLVs that are found in a
|
|
single LLDP frame. Entries of this this table, associated
|
|
with an MAC service access point (MSAP, the access point for
|
|
MAC services provided to the LCC sublayer, defined in IEEE
|
|
100, which is also identified with a particular
|
|
lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with
|
|
most recently received unrecognized TLV from the same MSAP,
|
|
or they will naturally age out when the rxInfoTTL timer
|
|
(associated with the MSAP) expires."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.3.2"
|
|
::= { lldpRemoteSystemsData 3 }
|
|
|
|
lldpRemUnknownTLVEntry OBJECT-TYPE
|
|
SYNTAX LldpRemUnknownTLVEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about an unrecognized TLV received from a
|
|
physical network connection. Entries may be created and
|
|
deleted in this table by the agent, if a physical topology
|
|
discovery process is active."
|
|
INDEX {
|
|
lldpRemUnknownTLVType
|
|
}
|
|
::= { lldpRemUnknownTLVTable 1 }
|
|
|
|
LldpRemUnknownTLVEntry ::= SEQUENCE {
|
|
lldpRemUnknownTLVType Integer32,
|
|
lldpRemUnknownTLVInfo OCTET STRING
|
|
}
|
|
|
|
lldpRemUnknownTLVType OBJECT-TYPE
|
|
SYNTAX Integer32(9..126)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value extracted from the type
|
|
field of the TLV."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.3.5"
|
|
::= { lldpRemUnknownTLVEntry 1 }
|
|
|
|
lldpRemUnknownTLVInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..511))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the value extracted from the value
|
|
field of the TLV."
|
|
REFERENCE
|
|
"IEEE 802.1AB-2004 section 10.3.5"
|
|
::= { lldpRemUnknownTLVEntry 2 }
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P M I B N O T I F I C A T I O N S
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
|
|
lldpNotificationPrefix OBJECT IDENTIFIER ::= { lldpNotifications 0 }
|
|
|
|
lldpRemTablesChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
lldpStatsRemTablesInserts,
|
|
lldpStatsRemTablesDeletes,
|
|
lldpStatsRemTablesDrops,
|
|
lldpStatsRemTablesAgeouts
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A lldpRemTablesChange notification is sent when the value
|
|
of lldpStatsRemTableLastChangeTime changes. It can be
|
|
utilized by an NMS to trigger LLDP remote systems table
|
|
maintenance polls.
|
|
|
|
Note that transmission of lldpRemTablesChange
|
|
notifications are throttled by the agent, as specified by the
|
|
'lldpNotificationInterval' object."
|
|
::= { lldpNotificationPrefix 1 }
|
|
|
|
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
-- L L D P M I B C O N F O R M A N C E
|
|
--
|
|
-- ***********************************************************
|
|
--
|
|
|
|
lldpCompliances OBJECT IDENTIFIER ::= { lldpConformance 1 }
|
|
lldpGroups OBJECT IDENTIFIER ::= { lldpConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
lldpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement
|
|
the LLDP MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
lldpConfigGroup,
|
|
lldpStatsGroup,
|
|
lldpLocSysGroup,
|
|
lldpRemSysGroup,
|
|
lldpNotificationsGroup
|
|
}
|
|
GROUP lldpOptLocSysGroup
|
|
DESCRIPTION
|
|
"This object represent the information associated with
|
|
the optional TLVs, therefore the agent may not implement
|
|
them."
|
|
::= { lldpCompliances 1 }
|
|
|
|
-- MIB groupings
|
|
|
|
lldpConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpMessageTxInterval,
|
|
lldpMessageTxHoldMultiplier,
|
|
-- lldpReinitDelay,
|
|
lldpTxDelay,
|
|
lldpNotificationInterval,
|
|
lldpPortConfigAdminStatus,
|
|
lldpPortConfigNotificationEnable,
|
|
lldpPortConfigTLVsTxEnable
|
|
-- lldpConfigManAddrPortsTxEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to configure the
|
|
LLDP implementation behavior.
|
|
|
|
This group is mandatory for agents which implement the LLDP."
|
|
::= { lldpGroups 1 }
|
|
|
|
lldpStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpStatsRemTablesLastChangeTime,
|
|
lldpStatsRemTablesInserts,
|
|
lldpStatsRemTablesDeletes,
|
|
lldpStatsRemTablesDrops,
|
|
lldpStatsRemTablesAgeouts,
|
|
lldpStatsPortFramesDiscardedTotal,
|
|
lldpStatsPortFramesInErrors,
|
|
lldpStatsPortFramesInTotal,
|
|
lldpStatsPortFramesOutTotal,
|
|
lldpStatsPortTLVsDiscardedTotal,
|
|
lldpStatsPortTLVsUnrecognizedTotal,
|
|
lldpStatsPortAgeouts
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent LLDP
|
|
statistics.
|
|
|
|
This group is mandatory for agents which implement the LLDP."
|
|
::= { lldpGroups 2 }
|
|
|
|
lldpLocSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpLocChassisType,
|
|
lldpLocChassisId,
|
|
lldpLocPortSubtype,
|
|
lldpLocPortId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent LLDP
|
|
Local System Information. The objects represent the
|
|
information associated with the mandatory TLVs.
|
|
|
|
This group is mandatory for agents which implement the LLDP."
|
|
::= { lldpGroups 3 }
|
|
|
|
lldpOptLocSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpLocPortDesc,
|
|
lldpLocSysDesc,
|
|
lldpLocSysName,
|
|
lldpLocSysCapSupported,
|
|
lldpLocSysCapEnabled
|
|
-- lldpLocManAddrLen,
|
|
-- lldpLocManAddrIfSubtype,
|
|
-- lldpLocManAddrIfId,
|
|
-- lldpLocManAddrOID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent optional
|
|
LLDP Local System Information. The objects represent the
|
|
information associated with the optional TLVs.
|
|
|
|
This group is optional for agents which implement the LLDP."
|
|
::= { lldpGroups 4 }
|
|
|
|
lldpRemSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
lldpRemChassisIdSubtype,
|
|
lldpRemChassisId,
|
|
lldpRemPortIdSubtype,
|
|
lldpRemPortId,
|
|
lldpRemPortDesc,
|
|
lldpRemSysName,
|
|
lldpRemSysDesc,
|
|
lldpRemSysCapSupported,
|
|
lldpRemSysCapEnabled,
|
|
-- lldpRemManAddrIfSubtype,
|
|
-- lldpRemManAddrIfId,
|
|
-- lldpRemManAddrOID,
|
|
lldpRemUnknownTLVInfo
|
|
-- lldpRemOrgDefInfo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent
|
|
LLDP Remote Systems Information. The objects represent the
|
|
information associated with the basic TLV set. Please note
|
|
that even the agent doesn't implement some of the optional
|
|
TLVs, it shall recognize all the optional TLV information
|
|
that the remote system may advertise.
|
|
|
|
This group is mandatory for agents which implement the LLDP."
|
|
::= { lldpGroups 5 }
|
|
|
|
lldpNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
lldpRemTablesChange
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of notifications used to indicate LLDP MIB
|
|
data consistency and general status information.
|
|
|
|
This group is mandatory for agents which implement the LLDP."
|
|
::= { lldpGroups 6 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
|
|
NtpStratum ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NTP stratum, with 16 representing no stratum."
|
|
SYNTAX Unsigned32 (1..16)
|
|
|
|
NtpDateTime ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "4d:4d:4d.4d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"NTP date/time on the device, in 128-bit
|
|
NTP date format. Ref: draft-ietf-ntp-ntpv4-proto-06,
|
|
section 6:
|
|
It includes a 64-bit signed seconds field
|
|
spanning 584 billion years and a 64-bit fraction
|
|
field resolving .05 attosecond (i.e. 0.5e-18).
|
|
For convenience in mapping between formats, the
|
|
seconds field is divided into a 32-bit era field
|
|
and a 32-bit timestamp field.
|
|
|
|
If time is not syncronized this field shall be a
|
|
zero-length string.
|
|
|
|
This TC is not to be used for objects that are used
|
|
to set the time of the node querying this object.
|
|
NTP should be used for this--or at least SNTP."
|
|
SYNTAX OCTET STRING (SIZE (0 | 16))
|
|
|
|
--
|
|
-- Section 1: General NTP Entity information objects
|
|
-- (relatively static information)
|
|
--
|
|
|
|
ntpEntSoftwareName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The product name of the installed NTP version."
|
|
::= { ntpEntInfo 1 }
|
|
|
|
ntpEntSoftwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software version of the installed NTP implementation."
|
|
::= { ntpEntInfo 2 }
|
|
|
|
ntpEntSoftwareVendor OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vendor/author of the installed NTP version."
|
|
::= { ntpEntInfo 4 }
|
|
|
|
ntpEntSystemType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"General hardware/os platform information."
|
|
::= { ntpEntInfo 5 }
|
|
|
|
ntpEntTimeResolution OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string describing the time resolution of the running NTP
|
|
implementation."
|
|
::= { ntpEntInfo 6 }
|
|
|
|
ntpEntTimePrecision OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entity's precision in integer format."
|
|
::= { ntpEntInfo 9 }
|
|
|
|
--
|
|
-- Section 2: Current NTP status (dynamic information)
|
|
--
|
|
|
|
ntpEntStatusCurrentMode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual mode of NTP as a string"
|
|
::= { ntpEntStatus 1 }
|
|
|
|
ntpEntStatusCurrentModeVal OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notRunning(1),
|
|
notSynchronized(2),
|
|
noneConfigured(3),
|
|
syncToLocal(4),
|
|
syncToRefclock(5),
|
|
syncToRemoteServer(6),
|
|
unknown(99)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current mode of the NTP as integer value."
|
|
DEFVAL { 99 }
|
|
::= { ntpEntStatus 2 }
|
|
|
|
ntpEntStatusStratum OBJECT-TYPE
|
|
SYNTAX NtpStratum
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NTP entity's own stratum value."
|
|
DEFVAL { 16 }
|
|
::= { ntpEntStatus 3 }
|
|
|
|
ntpEntStatusActiveRefSourceId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The association ID of the current syspeer."
|
|
DEFVAL { 0 }
|
|
::= { ntpEntStatus 4 }
|
|
|
|
ntpEntStatusActiveRefSourceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hostname/descriptive name of the current reference source
|
|
selected as syspeer."
|
|
::= { ntpEntStatus 5 }
|
|
|
|
ntpEntStatusNumberOfRefSources OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..99)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of reference sources configured for NTP."
|
|
DEFVAL { 0 }
|
|
::= { ntpEntStatus 7 }
|
|
|
|
ntpEntStatusDateTime OBJECT-TYPE
|
|
SYNTAX NtpDateTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current NTP date/time on the device, in 128-bit
|
|
NTP date format. Ref: draft-ietf-ntp-ntpv4-proto-06,
|
|
section 6:
|
|
It includes a 64-bit signed seconds field
|
|
spanning 584 billion years and a 64-bit fraction
|
|
field resolving .05 attosecond (i.e. 0.5e-18).
|
|
For convenience in mapping between formats, the
|
|
seconds field is divided into a 32-bit era field
|
|
and a 32-bit timestamp field.
|
|
|
|
If time is not syncronized this field shall be a
|
|
zero-length string.
|
|
|
|
This object can be used to timestamp events on this
|
|
node and allow a management station to coorelate
|
|
different time objects. For example, a management
|
|
station could query this object and sysUpTime in
|
|
the same operation to be able to relate sysUpTime
|
|
to NTP time.
|
|
|
|
This object is not to be used to set the time of
|
|
the node querying this object. NTP should be used
|
|
for this--or at least SNTP."
|
|
::= { ntpEntStatus 10 }
|
|
|
|
ntpEntStatusInPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of NTP messages delivered to the
|
|
NTP entity from the transport service."
|
|
::= { ntpEntStatus 13 }
|
|
|
|
ntpEntStatusOutPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of NTP messages delivered to the
|
|
transport service by this NTP entity."
|
|
::= { ntpEntStatus 14 }
|
|
|
|
ntpEntStatusBadVersion OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of NTP messages which were delivered
|
|
to this NTP entity and were for an unsupported NTP
|
|
version."
|
|
::= { ntpEntStatus 15 }
|
|
|
|
ntpEntStatusProtocolError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of NTP messages which were delivered
|
|
to this NTP entity and this entity was not able to
|
|
process due to an NTP protocol error."
|
|
::= { ntpEntStatus 16 }
|
|
|
|
|
|
|
|
--
|
|
-- Conformance/Compliance statements
|
|
--
|
|
|
|
ntpEntConformance OBJECT IDENTIFIER ::= { ntpSnmpMIB 6 }
|
|
|
|
ntpEntCompliances OBJECT IDENTIFIER ::= { ntpEntConformance 1 }
|
|
ntpEntGroups OBJECT IDENTIFIER ::= { ntpEntConformance 2 }
|
|
|
|
ntpEntNTPCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which use NTP and
|
|
implement the NTP MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ntpEntObjectsGroup1,
|
|
ntpEntObjectsGroup2,
|
|
ntpEntNotifPrefixGroup
|
|
}
|
|
::= { ntpEntCompliances 1 }
|
|
|
|
ntpEntSNTPCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which use SNTP and
|
|
implement the NTP MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ntpEntObjectsGroup1
|
|
}
|
|
::= { ntpEntCompliances 2 }
|
|
|
|
ntpEntObjectsGroup1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ntpEntSoftwareName,
|
|
ntpEntSoftwareVersion,
|
|
-- ntpEntSoftwareVersionVal,
|
|
ntpEntSoftwareVendor,
|
|
ntpEntSystemType,
|
|
-- ntpEntStatusEntityUptime,
|
|
ntpEntStatusDateTime
|
|
-- ntpAssocName,
|
|
-- ntpAssocRefId,
|
|
-- ntpAssocAddressType,
|
|
-- ntpAssocAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for the NTP MIB that all NTP
|
|
or SNTP entities should implement."
|
|
::= { ntpEntGroups 1 }
|
|
|
|
ntpEntObjectsGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
ntpEntTimeResolution,
|
|
-- ntpEntTimeResolutionVal,
|
|
ntpEntTimePrecision,
|
|
-- ntpEntTimePrecisionVal,
|
|
-- ntpEntTimeDistance,
|
|
ntpEntStatusCurrentMode,
|
|
ntpEntStatusCurrentModeVal,
|
|
ntpEntStatusStratum,
|
|
ntpEntStatusActiveRefSourceId,
|
|
ntpEntStatusActiveRefSourceName,
|
|
-- ntpEntStatusActiveOffset,
|
|
ntpEntStatusNumberOfRefSources,
|
|
-- ntpEntStatusDispersion,
|
|
-- ntpEntStatusLeapSecond,
|
|
-- ntpEntStatusLeapSecDirection,
|
|
ntpEntStatusInPkts,
|
|
ntpEntStatusOutPkts,
|
|
ntpEntStatusBadVersion,
|
|
ntpEntStatusProtocolError
|
|
-- ntpEntStatusNotifications,
|
|
-- ntpAssocOffset,
|
|
-- ntpAssocStratum,
|
|
-- ntpAssocStatusJitter,
|
|
-- ntpAssocStatusDelay,
|
|
-- ntpAssocStatusDispersion,
|
|
-- ntpAssocStatInPkts,
|
|
-- ntpAssocStatOutPkts,
|
|
-- ntpAssocStatProtocolError,
|
|
-- ntpEntHeartbeatInterval,
|
|
-- ntpEntNotifBits,
|
|
-- ntpEntNotifMessage
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for the NTP MIB that are optional
|
|
for NTP or SNTP entities to implement."
|
|
::= { ntpEntGroups 2 }
|
|
|
|
--ntpEntNotifPrefixGroup NOTIFICATION-GROUP
|
|
-- NOTIFICATIONS {
|
|
-- ntpEntNotifModeChange,
|
|
-- ntpEntNotifStratumChange,
|
|
-- ntpEntNotifSyspeerChanged,
|
|
-- ntpEntNotifAddAssociation,
|
|
-- ntpEntNotifRemoveAssociation,
|
|
-- ntpEntNotifConfigChanged,
|
|
-- ntpEntNotifLeapSecondAnnounced,
|
|
-- ntpEntNotifHeartbeat
|
|
-- }
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A collection of notifications for the NTP MIB"
|
|
-- ::= { ntpEntGroups 3 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
-- (xxx.100.26) priPoeConfig group
|
|
|
|
--xxx.100.26.1
|
|
poeSystemEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline global switch. Enable expresses it is turned on, while disable indicates that off."
|
|
::= { priPoeConfig 1 }
|
|
|
|
--xxx.100.26.2
|
|
poeMaxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (37..180)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline global available power whitch cannot be exceeded by the total power of all PDs."
|
|
::= { priPoeConfig 2 }
|
|
|
|
--xxx.100.26.3
|
|
poePoliceEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline power mamagement switch. Enable expresses it is in priority-policy mode, while disable indicates that in first-in-first-get mode."
|
|
::= { priPoeConfig 3 }
|
|
|
|
--xxx.100.26.4
|
|
poeLegacyEnable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline nonstandard PD detect switch. Enable expresses nonstandard PD can be detected, while disable indicates that cannot be detected."
|
|
::= { priPoeConfig 4 }
|
|
|
|
--xxx.100.26.5
|
|
poeDisconnect OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ac (0),
|
|
dc (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline disconnection mode."
|
|
::= { priPoeConfig 5 }
|
|
|
|
--xxx.100.26.6
|
|
poeCurrentPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline current export power. It is a real time value."
|
|
::= { priPoeConfig 6 }
|
|
|
|
--xxx.100.26.7
|
|
poePortMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
spare (1),
|
|
signal (0)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline power supply mode."
|
|
::= { priPoeConfig 7 }
|
|
|
|
--xxx.100.26.8
|
|
poeSoftwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline software version."
|
|
::= { priPoeConfig 8 }
|
|
|
|
--xxx.100.26.9
|
|
poeHardwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline hardware version."
|
|
::= { priPoeConfig 9 }
|
|
|
|
--xxx.100.26.10
|
|
poePortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PoePortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline port configuration table"
|
|
::= { priPoeConfig 10 }
|
|
|
|
--xxx.100.26.10.1
|
|
poePortConfigEntry OBJECT-TYPE
|
|
SYNTAX PoePortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline configuration in port."
|
|
INDEX { portIndex }
|
|
::= { poePortConfigTable 1 }
|
|
|
|
PoePortConfigEntry
|
|
::= SEQUENCE
|
|
{
|
|
poePortIndex INTEGER,
|
|
poePortStatus INTEGER,
|
|
poePortPriority INTEGER,
|
|
poePortMaxPower INTEGER,
|
|
poePortCurrentPower INTEGER,
|
|
poePortCurrentCurrent INTEGER,
|
|
poePortCurrentVoltage INTEGER,
|
|
poePortPdStatus INTEGER,
|
|
poePortPdClass INTEGER
|
|
}
|
|
|
|
--xxx.100.26.10.1.1
|
|
poePortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The power inline port index."
|
|
::= { poePortConfigEntry 1 }
|
|
|
|
--xxx.100.26.10.1.2
|
|
poePortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable (1),
|
|
disable (0)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline port switch. Enable expresses it is turned on, while disable indicates that off."
|
|
::= { poePortConfigEntry 2 }
|
|
|
|
--xxx.100.26.10.1.3
|
|
poePortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
critical (0),
|
|
high (1),
|
|
low (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline port priority."
|
|
::= { poePortConfigEntry 3 }
|
|
|
|
--xxx.100.26.10.1.4
|
|
poePortMaxPower OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15400)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline port available power whitch cannot be exceeded by the connected PD."
|
|
::= { poePortConfigEntry 4 }
|
|
|
|
--xxx.100.26.10.1.5
|
|
poePortCurrentPower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline port used power. It is a real time value."
|
|
::= { poePortConfigEntry 5 }
|
|
|
|
--xxx.100.26.10.1.6
|
|
poePortCurrentCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline port export current. It is a real time value."
|
|
::= { poePortConfigEntry 6 }
|
|
|
|
--xxx.100.26.10.1.7
|
|
poePortCurrentVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline port export voltage. It is a real time value."
|
|
::= { poePortConfigEntry 7 }
|
|
|
|
--xxx.100.26.10.1.8
|
|
poePortPdStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
on(1),
|
|
off(2),
|
|
faulty(3),
|
|
deny(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The power inline detect status. on(1):PD is connected and natural powered, off(2):PD is not connected,
|
|
faulty(3):error, deny(4):power is low or high."
|
|
::= { poePortConfigEntry 8 }
|
|
|
|
--xxx.100.26.10.1.9
|
|
poePortPdClass OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The connected PD class of power inline"
|
|
::= { poePortConfigEntry 9 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
|
|
-- (xxx.100.27) priQos2 group
|
|
|
|
--xxx.100.27.1
|
|
qos2 OBJECT IDENTIFIER ::= { priQos2 1 }
|
|
--********************************************************************************************************
|
|
--xxx.100.27.1.1
|
|
qos2MapCostoIntp OBJECT IDENTIFIER ::= { qos2 1 }
|
|
|
|
--xxx.100.27.1.1.1
|
|
qos2MapCostoIntp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to IntPrio map,IntPrio1<0-7>."
|
|
::= { qos2MapCostoIntp 1 }
|
|
|
|
--xxx.100.27.1.1.2
|
|
qos2MapCostoIntp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to IntPrio map,IntPrio2<0-7>."
|
|
::= { qos2MapCostoIntp 2 }
|
|
|
|
--xxx.100.27.1.1.3
|
|
qos2MapCostoIntp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to IntPrio map,IntPrio1<0-7>."
|
|
::= { qos2MapCostoIntp 3 }
|
|
|
|
--xxx.100.27.1.1.4
|
|
qos2MapCostoIntp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to IntPrio map,IntPrio1<0-7>."
|
|
::= { qos2MapCostoIntp 4 }
|
|
|
|
--xxx.100.27.1.1.5
|
|
qos2MapCostoIntp5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to IntPrio map,IntPrio1<0-7>."
|
|
::= { qos2MapCostoIntp 5 }
|
|
|
|
--xxx.100.27.1.1.6
|
|
qos2MapCostoIntp6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to IntPrio map,IntPrio1<0-7>."
|
|
::= { qos2MapCostoIntp 6 }
|
|
|
|
--xxx.100.27.1.1.7
|
|
qos2MapCostoIntp7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to IntPrio map,IntPrio1<0-7>."
|
|
::= { qos2MapCostoIntp 7 }
|
|
|
|
--xxx.100.27.1.1.8
|
|
qos2MapCostoIntp8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to IntPrio map,IntPrio1<0-7>."
|
|
::= { qos2MapCostoIntp 8 }
|
|
|
|
--xxx.100.27.1.1.9
|
|
qos2MapCostoIntpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2MapCostoIntp 9 }
|
|
|
|
--xxx.100.27.1.2
|
|
qos2MapCostoDP OBJECT IDENTIFIER ::= { qos2 2 }
|
|
|
|
--xxx.100.27.1.2.1
|
|
qos2MapCostoDP1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to drop precedence map,Drop Precedence1<0-2>."
|
|
::= { qos2MapCostoDP 1 }
|
|
|
|
--xxx.100.27.1.2.2
|
|
qos2MapCostoDP2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to drop precedence map,Drop Precedence2<0-2>."
|
|
::= { qos2MapCostoDP 2 }
|
|
|
|
--xxx.100.27.1.2.3
|
|
qos2MapCostoDP3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to drop precedence map,Drop Precedence3<0-2>."
|
|
::= { qos2MapCostoDP 3 }
|
|
|
|
--xxx.100.27.1.2.4
|
|
qos2MapCostoDP4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to drop precedence map,Drop Precedence4<0-2>."
|
|
::= { qos2MapCostoDP 4 }
|
|
|
|
--xxx.100.27.1.2.5
|
|
qos2MapCostoDP5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to drop precedence map,Drop Precedence5<0-2>."
|
|
::= { qos2MapCostoDP 5 }
|
|
|
|
--xxx.100.27.1.2.6
|
|
qos2MapCostoDP6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to drop precedence map,Drop Precedence6<0-2>."
|
|
::= { qos2MapCostoDP 6 }
|
|
|
|
--xxx.100.27.1.2.7
|
|
qos2MapCostoDP7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to drop precedence map,Drop Precedence7<0-2>."
|
|
::= { qos2MapCostoDP 7 }
|
|
|
|
--xxx.100.27.1.2.8
|
|
qos2MapCostoDP8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"COS to drop precedence map,Drop Precedence8<0-2>."
|
|
::= { qos2MapCostoDP 8 }
|
|
|
|
--xxx.100.27.1.2.9
|
|
qos2MapCostoDPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2MapCostoDP 9 }
|
|
|
|
--xxx.100.27.1.3
|
|
qos2MapDSCPtoDSCP OBJECT IDENTIFIER ::= { qos2 3 }
|
|
|
|
--xxx.100.27.1.3.1
|
|
qos2MapDSCPtoDSCP1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DSCP map, DSCP1<0-63>."
|
|
::= { qos2MapDSCPtoDSCP 1 }
|
|
|
|
--xxx.100.27.1.3.2
|
|
qos2MapDSCPtoDSCP2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DSCP map, DSCP2<0-63>."
|
|
::= { qos2MapDSCPtoDSCP 2 }
|
|
|
|
--xxx.100.27.1.3.3
|
|
qos2MapDSCPtoDSCP3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DSCP map, DSCP3<0-63>."
|
|
::= { qos2MapDSCPtoDSCP 3 }
|
|
|
|
--xxx.100.27.1.3.4
|
|
qos2MapDSCPtoDSCP4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DSCP map, DSCP4<0-63>."
|
|
::= { qos2MapDSCPtoDSCP 4 }
|
|
|
|
--xxx.100.27.1.3.5
|
|
qos2MapDSCPtoDSCP5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DSCP map, DSCP5<0-63>."
|
|
::= { qos2MapDSCPtoDSCP 5 }
|
|
|
|
--xxx.100.27.1.3.6
|
|
qos2MapDSCPtoDSCP6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DSCP map, DSCP6<0-63>."
|
|
::= { qos2MapDSCPtoDSCP 6 }
|
|
|
|
--xxx.100.27.1.3.7
|
|
qos2MapDSCPtoDSCP7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DSCP map, DSCP7<0-63>."
|
|
::= { qos2MapDSCPtoDSCP 7 }
|
|
|
|
--xxx.100.27.1.3.8
|
|
qos2MapDSCPtoDSCP8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DSCP map, DSCP8<0-63>."
|
|
::= { qos2MapDSCPtoDSCP 8 }
|
|
|
|
--xxx.100.27.1.3.9
|
|
qos2MapDSCPtoDSCPoutDSCP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DSCP map, outDSCP<0-63>."
|
|
::= { qos2MapDSCPtoDSCP 9 }
|
|
|
|
--xxx.100.27.1.3.10
|
|
qos2MapDSCPtoDSCPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2MapDSCPtoDSCP 10 }
|
|
|
|
--xxx.100.27.1.4
|
|
qos2MapDSCPtoIntp OBJECT IDENTIFIER ::= { qos2 4 }
|
|
|
|
--xxx.100.27.1.4.1
|
|
qos2MapDSCPtoIntp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to Intp map, DSCP1<0-63>."
|
|
::= { qos2MapDSCPtoIntp 1 }
|
|
|
|
--xxx.100.27.1.4.2
|
|
qos2MapDSCPtoIntp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to Intp map, DSCP2<0-63>."
|
|
::= { qos2MapDSCPtoIntp 2 }
|
|
|
|
--xxx.100.27.1.4.3
|
|
qos2MapDSCPtoIntp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to Intp map, DSCP3<0-63>."
|
|
::= { qos2MapDSCPtoIntp 3 }
|
|
|
|
--xxx.100.27.1.4.4
|
|
qos2MapDSCPtoIntp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to Intp map, DSCP4<0-63>."
|
|
::= { qos2MapDSCPtoIntp 4 }
|
|
|
|
--xxx.100.27.1.4.5
|
|
qos2MapDSCPtoIntp5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to Intp map, DSCP5<0-63>."
|
|
::= { qos2MapDSCPtoIntp 5 }
|
|
|
|
--xxx.100.27.1.4.6
|
|
qos2MapDSCPtoIntp6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to Intp map, DSCP6<0-63>."
|
|
::= { qos2MapDSCPtoIntp 6 }
|
|
|
|
--xxx.100.27.1.4.7
|
|
qos2MapDSCPtoIntp7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to Intp map, DSCP7<0-63>."
|
|
::= { qos2MapDSCPtoIntp 7 }
|
|
|
|
--xxx.100.27.1.4.8
|
|
qos2MapDSCPtoIntp8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to Intp map, DSCP8<0-63>."
|
|
::= { qos2MapDSCPtoIntp 8 }
|
|
|
|
--xxx.100.27.1.4.9
|
|
qos2MapDSCPtoIntpIntPriovalue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to Intp map, IntPrio value<0-7>."
|
|
::= { qos2MapDSCPtoIntp 9 }
|
|
|
|
--xxx.100.27.1.4.10
|
|
qos2MapDSCPtoIntpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2MapDSCPtoIntp 10 }
|
|
|
|
--xxx.100.27.1.5
|
|
qos2MapDSCPtoDP OBJECT IDENTIFIER ::= { qos2 5 }
|
|
|
|
--xxx.100.27.1.5.1
|
|
qos2MapDSCPtoDP1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DP map, DSCP1<0-63>."
|
|
::= { qos2MapDSCPtoDP 1 }
|
|
|
|
--xxx.100.27.1.5.2
|
|
qos2MapDSCPtoDP2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DP map, DSCP2<0-63>."
|
|
::= { qos2MapDSCPtoDP 2 }
|
|
|
|
--xxx.100.27.1.5.3
|
|
qos2MapDSCPtoDP3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DP map, DSCP3<0-63>."
|
|
::= { qos2MapDSCPtoDP 3 }
|
|
|
|
--xxx.100.27.1.5.4
|
|
qos2MapDSCPtoDP4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DP map, DSCP4<0-63>."
|
|
::= { qos2MapDSCPtoDP 4 }
|
|
|
|
--xxx.100.27.1.5.5
|
|
qos2MapDSCPtoDP5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DP map, DSCP5<0-63>."
|
|
::= { qos2MapDSCPtoDP 5 }
|
|
|
|
--xxx.100.27.1.5.6
|
|
qos2MapDSCPtoDP6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DP map, DSCP6<0-63>."
|
|
::= { qos2MapDSCPtoDP 6 }
|
|
|
|
--xxx.100.27.1.5.7
|
|
qos2MapDSCPtoDP7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DP map, DSCP7<0-63>."
|
|
::= { qos2MapDSCPtoDP 7 }
|
|
|
|
--xxx.100.27.1.5.8
|
|
qos2MapDSCPtoDP8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DP map, DSCP8<0-63>."
|
|
::= { qos2MapDSCPtoDP 8 }
|
|
|
|
--xxx.100.27.1.5.9
|
|
qos2MapDSCPtoDPvalue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DSCP to DP map, Drop Precedence value<0-2>."
|
|
::= { qos2MapDSCPtoDP 9 }
|
|
|
|
--xxx.100.27.1.5.10
|
|
qos2MapDSCPtoDPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2MapDSCPtoDP 10 }
|
|
|
|
--xxx.100.27.1.6
|
|
qos2MapExptoIntp OBJECT IDENTIFIER ::= { qos2 6 }
|
|
|
|
--xxx.100.27.1.6.1
|
|
qos2MapExptoIntp1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to Intp map, IntPrio1 value<0-7>."
|
|
::= { qos2MapExptoIntp 1 }
|
|
|
|
--xxx.100.27.1.6.2
|
|
qos2MapExptoIntp2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to Intp map, IntPrio2 value<0-7>."
|
|
::= { qos2MapExptoIntp 2 }
|
|
|
|
--xxx.100.27.1.6.3
|
|
qos2MapExptoIntp3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to Intp map, IntPrio3 value<0-7>."
|
|
::= { qos2MapExptoIntp 3 }
|
|
|
|
--xxx.100.27.1.6.4
|
|
qos2MapExptoIntp4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to Intp map, IntPrio4 value<0-7>."
|
|
::= { qos2MapExptoIntp 4 }
|
|
|
|
--xxx.100.27.1.6.5
|
|
qos2MapExptoIntp5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to Intp map, IntPrio5 value<0-7>."
|
|
::= { qos2MapExptoIntp 5 }
|
|
|
|
--xxx.100.27.1.6.6
|
|
qos2MapExptoIntp6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to Intp map, IntPrio6 value<0-7>."
|
|
::= { qos2MapExptoIntp 6 }
|
|
|
|
--xxx.100.27.1.6.7
|
|
qos2MapExptoIntp7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to Intp map, IntPrio7 value<0-7>."
|
|
::= { qos2MapExptoIntp 7 }
|
|
|
|
--xxx.100.27.1.6.8
|
|
qos2MapExptoIntp8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to Intp map, IntPrio8 value<0-7>."
|
|
::= { qos2MapExptoIntp 8 }
|
|
|
|
--xxx.100.27.1.6.9
|
|
qos2MapExptoIntpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2MapExptoIntp 9 }
|
|
|
|
--xxx.100.27.1.7
|
|
qos2MapExptoDP OBJECT IDENTIFIER ::= { qos2 7 }
|
|
|
|
--xxx.100.27.1.7.1
|
|
qos2MapExptoDP1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to DP map, Drop Precedence value<0-2>."
|
|
::= { qos2MapExptoDP 1 }
|
|
|
|
--xxx.100.27.1.7.2
|
|
qos2MapExptoDP2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to DP map, Drop Precedence value<0-2>."
|
|
::= { qos2MapExptoDP 2 }
|
|
|
|
--xxx.100.27.1.7.3
|
|
qos2MapExptoDP3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to DP map, Drop Precedence value<0-2>."
|
|
::= { qos2MapExptoDP 3 }
|
|
|
|
--xxx.100.27.1.7.4
|
|
qos2MapExptoDP4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to DP map, Drop Precedence value<0-2>."
|
|
::= { qos2MapExptoDP 4 }
|
|
|
|
--xxx.100.27.1.7.5
|
|
qos2MapExptoDP5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to DP map, Drop Precedence value<0-2>."
|
|
::= { qos2MapExptoDP 5 }
|
|
|
|
--xxx.100.27.1.7.6
|
|
qos2MapExptoDP6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to DP map, Drop Precedence value<0-2>."
|
|
::= { qos2MapExptoDP 6 }
|
|
|
|
--xxx.100.27.1.7.7
|
|
qos2MapExptoDP7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to DP map, Drop Precedence value<0-2>."
|
|
::= { qos2MapExptoDP 7 }
|
|
|
|
--xxx.100.27.1.7.8
|
|
qos2MapExptoDP8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EXP to DP map, Drop Precedence value<0-2>."
|
|
::= { qos2MapExptoDP 8 }
|
|
|
|
--xxx.100.27.1.7.9
|
|
qos2MapExptoDPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2MapExptoDP 9 }
|
|
|
|
--xxx.100.27.1.8
|
|
qos2MapIntptoDSCP OBJECT IDENTIFIER ::= { qos2 8 }
|
|
|
|
--xxx.100.27.1.8.1
|
|
qos2MapIntptoDSCP1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to DSCP map, IntPrio value<0-7>."
|
|
::= { qos2MapIntptoDSCP 1 }
|
|
|
|
--xxx.100.27.1.8.2
|
|
qos2MapIntptoDSCP2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to DSCP map, IntPrio value<0-7>."
|
|
::= { qos2MapIntptoDSCP 2 }
|
|
|
|
--xxx.100.27.1.8.3
|
|
qos2MapIntptoDSCP3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to DSCP map, IntPrio value<0-7>."
|
|
::= { qos2MapIntptoDSCP 3 }
|
|
|
|
--xxx.100.27.1.8.4
|
|
qos2MapIntptoDSCP4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to DSCP map, IntPrio value<0-7>."
|
|
::= { qos2MapIntptoDSCP 4 }
|
|
|
|
--xxx.100.27.1.8.5
|
|
qos2MapIntptoDSCP5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to DSCP map, IntPrio value<0-7>."
|
|
::= { qos2MapIntptoDSCP 5 }
|
|
|
|
--xxx.100.27.1.8.6
|
|
qos2MapIntptoDSCP6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to DSCP map, IntPrio value<0-7>."
|
|
::= { qos2MapIntptoDSCP 6 }
|
|
|
|
--xxx.100.27.1.8.7
|
|
qos2MapIntptoDSCP7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to DSCP map, IntPrio value<0-7>."
|
|
::= { qos2MapIntptoDSCP 7 }
|
|
|
|
--xxx.100.27.1.8.8
|
|
qos2MapIntptoDSCP8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to DSCP map, IntPrio value<0-7>."
|
|
::= { qos2MapIntptoDSCP 8 }
|
|
|
|
--xxx.100.27.1.8.9
|
|
qos2MapIntptoDSCPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2MapIntptoDSCP 9 }
|
|
|
|
--xxx.100.27.1.10
|
|
qos2MapIntptoEXP OBJECT IDENTIFIER ::= { qos2 10 }
|
|
|
|
--xxx.100.27.1.10.1
|
|
qos2MapIntptoEXP1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to EXP map, EXP value<0-7>."
|
|
::= { qos2MapIntptoEXP 1 }
|
|
|
|
--xxx.100.27.1.10.2
|
|
qos2MapIntptoEXP2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to EXP map, EXP value<0-7>."
|
|
::= { qos2MapIntptoEXP 2 }
|
|
|
|
--xxx.100.27.1.10.3
|
|
qos2MapIntptoEXP3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to EXP map, EXP value<0-7>."
|
|
::= { qos2MapIntptoEXP 3 }
|
|
|
|
--xxx.100.27.1.10.4
|
|
qos2MapIntptoEXP4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to EXP map, EXP value<0-7>."
|
|
::= { qos2MapIntptoEXP 4 }
|
|
|
|
--xxx.100.27.1.10.5
|
|
qos2MapIntptoEXP5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to EXP map, EXP value<0-7>."
|
|
::= { qos2MapIntptoEXP 5 }
|
|
|
|
--xxx.100.27.1.10.6
|
|
qos2MapIntptoEXP6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to EXP map, EXP value<0-7>."
|
|
::= { qos2MapIntptoEXP 6 }
|
|
|
|
--xxx.100.27.1.10.7
|
|
qos2MapIntptoEXP7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to EXP map, EXP value<0-7>."
|
|
::= { qos2MapIntptoEXP 7 }
|
|
|
|
--xxx.100.27.1.10.8
|
|
qos2MapIntptoEXP8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Intp to EXP map, EXP value<0-7>."
|
|
::= { qos2MapIntptoEXP 8 }
|
|
|
|
--xxx.100.27.1.10.9
|
|
qos2MapIntptoEXPStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2MapIntptoEXP 9 }
|
|
|
|
--xxx.100.27.1.11
|
|
qos2AggregatePolicy OBJECT IDENTIFIER ::= { qos2 11 }
|
|
|
|
--xxx.100.27.1.11.1
|
|
qos2AggPolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Aggregate policy name<1-64>."
|
|
::= { qos2AggregatePolicy 1 }
|
|
|
|
--xxx.100.27.1.11.2
|
|
qos2AggPolicyCIRKbps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIR(Committed Information Rate) Kbits per second <1-10000000>."
|
|
::= { qos2AggregatePolicy 2 }
|
|
|
|
--xxx.100.27.1.11.3
|
|
qos2AggPolicyCBSKbps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CBS(Committed Burst Size) Kbits per second <1-1000000>."
|
|
::= { qos2AggregatePolicy 3 }
|
|
|
|
--xxx.100.27.1.11.4
|
|
qos2AggPolicyPBSKbps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PBS(Peak Burst Size) Kbits per second <1-1000000>."
|
|
::= { qos2AggregatePolicy 4 }
|
|
|
|
--xxx.100.27.1.11.5
|
|
qos2AggPolicyPIRKbps OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PIR(Peak Information Rate) Kbits per second <1-10000000>."
|
|
::= { qos2AggregatePolicy 5 }
|
|
|
|
--xxx.100.27.1.11.6
|
|
qos2AggPolicyConformAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
set-dscp-transmit(2),
|
|
set-prec-transmit(3),
|
|
set-cos-transmit(4),
|
|
set-drop-precedence(5),
|
|
set-internal-priority(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"conform-action transmit means send packets without any change when specified speed is not exceeded;
|
|
conform-action drop means drop packets when specified speed is not exceeded;
|
|
conform-action set-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is not exceeded;
|
|
conform-action set-prec-transmit specifies to mark down packet TOS value according to policed-dscp mapping when specified speed is not exceeded.
|
|
."
|
|
::= { qos2AggregatePolicy 6 }
|
|
|
|
--xxx.100.27.1.11.7
|
|
qos2AggPolicyConformActionChangeValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If conform-action is set-dscp-transmit(2),the value is between 0-63;
|
|
If conform-action is set-prec-transmit(3),the value is between 0-7;
|
|
If conform-action is set-cos-transmit(4),the value is between 0-7;
|
|
If conform-action is set-drop-precedence(5),the value is between 0-2;
|
|
If conform-action is set-internal-priority(6),the value is between 0-7;"
|
|
::= { qos2AggregatePolicy 7 }
|
|
|
|
--xxx.100.27.1.11.8
|
|
qos2AggPolicyExceedAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
set-dscp-transmit(2),
|
|
set-prec-transmit(3),
|
|
set-cos-transmit(4),
|
|
set-drop-precedence(5),
|
|
set-internal-priority(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"conform-action transmit means send packets without any change when specified speed is not exceeded;
|
|
conform-action drop means drop packets when specified speed is not exceeded;
|
|
conform-action set-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is not exceeded;
|
|
conform-action set-prec-transmit specifies to mark down packet TOS value according to policed-dscp mapping when specified speed is not exceeded.
|
|
."
|
|
::= { qos2AggregatePolicy 8 }
|
|
|
|
--xxx.100.27.1.11.9
|
|
qos2AggPolicyExceedActionChangeValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If conform-action is set-dscp-transmit(2),the value is between 0-63;
|
|
If conform-action is set-prec-transmit(3),the value is between 0-7;
|
|
If conform-action is set-cos-transmit(4),the value is between 0-7;
|
|
If conform-action is set-drop-precedence(5),the value is between 0-2;
|
|
If conform-action is set-internal-priority(6),the value is between 0-7;"
|
|
::= { qos2AggregatePolicy 9 }
|
|
|
|
--xxx.100.27.1.11.10
|
|
qos2AggPolicyViolateAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
set-dscp-transmit(2),
|
|
set-prec-transmit(3),
|
|
set-cos-transmit(4),
|
|
set-drop-precedence(5),
|
|
set-internal-priority(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"conform-action transmit means send packets without any change when specified speed is not exceeded;
|
|
conform-action drop means drop packets when specified speed is not exceeded;
|
|
conform-action set-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is not exceeded;
|
|
conform-action set-prec-transmit specifies to mark down packet TOS value according to policed-dscp mapping when specified speed is not exceeded.
|
|
."
|
|
::= { qos2AggregatePolicy 10 }
|
|
|
|
--xxx.100.27.1.11.11
|
|
qos2AggPolicyViolateActionChangeValue OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If conform-action is set-dscp-transmit(2),the value is between 0-63;
|
|
If conform-action is set-prec-transmit(3),the value is between 0-7;
|
|
If conform-action is set-cos-transmit(4),the value is between 0-7;
|
|
If conform-action is set-drop-precedence(5),the value is between 0-2;
|
|
If conform-action is set-internal-priority(6),the value is between 0-7;"
|
|
::= { qos2AggregatePolicy 11 }
|
|
|
|
--xxx.100.27.1.11.12
|
|
qos2AggPolicyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2AggregatePolicy 12 }
|
|
|
|
|
|
--xxx.100.27.1.12
|
|
qos2ServicePolicyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Qos2ServicePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" QoS service policy table."
|
|
::= { qos2 12}
|
|
|
|
--xxx.100.27.1.12.1
|
|
qos2ServicePolicyEntry OBJECT-TYPE
|
|
SYNTAX Qos2ServicePolicyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" QoS service policy table."
|
|
INDEX { qos2PolicyMapName }
|
|
::= { qos2ServicePolicyTable 1 }
|
|
|
|
Qos2ServicePolicyEntry
|
|
::= SEQUENCE
|
|
{
|
|
qos2PolicyMapName DisplayString ,
|
|
qos2ServicePolicyVlanList DisplayString ,
|
|
qos2ServicePolicyStatus INTEGER
|
|
}
|
|
|
|
--xxx.100.27.1.12.1.1
|
|
qos2PolicyMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Policy map name<1-64>."
|
|
::= { qos2ServicePolicyEntry 1 }
|
|
|
|
|
|
--xxx.100.27.1.12.1.2
|
|
qos2ServicePolicyVlanList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Vlan list."
|
|
::= { qos2ServicePolicyEntry 2 }
|
|
|
|
--xxx.100.27.1.12.1.3
|
|
qos2ServicePolicyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2ServicePolicyEntry 3 }
|
|
|
|
--xxx.100.27.1.13
|
|
qos2PortTable OBJECT IDENTIFIER ::= { qos2 13 }
|
|
|
|
--xxx.100.27.1.13.1
|
|
qos2PortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port Index"
|
|
::= { qos2PortTable 1 }
|
|
|
|
--xxx.100.27.1.13.2
|
|
qos2PortType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
trust(0),
|
|
cos(1),
|
|
policy(2),
|
|
queueAndBandwidth(3),
|
|
queueAndAlgorithm(4),
|
|
queueAndWdrr(5),
|
|
queueAndWrr(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the relation between qosPortType and CLI:
|
|
0 mls qos trust {cos |dscp };
|
|
1 mls qos cos {<default-cos>};
|
|
2 service-policy input WORD;
|
|
3 mls qos queue {<queue id>} bandwidth {<MinBandwidth> <MaxBandwidth>};
|
|
4 mls qos queue algorithm {sp |wdrr |wrr };
|
|
5 mls qos queue wdrr weight {<Queue1 bandwidth> <Queue2 bandwidth> <Queue3 bandwidth> <Queue4 bandwidth> <Queue5 bandwidth> <Queue6 bandwidth> <Queue7 bandwidth> <Queue8 bandwidth>};
|
|
6 mls qos queue wrr weight {<Queue1 weight> <Queue2 weight> <Queue3 weight> <Queue4 weight> <Queue5 weight> <Queue6 weight> <Queue7 weight> <Queue8 weight>}.
|
|
According to the relation,when configurate qos with snmp,first set the qosPortType to the correct value to select CLI,
|
|
then set next CLI parameter.Fox example,set qos default cos is 5, first set qosPortType=1 ,then set qosPortCos to 5,
|
|
finally setting qosPortStatus to 1, trigger snmp-cache works."
|
|
::= { qos2PortTable 2 }
|
|
|
|
--xxx.100.27.1.13.3
|
|
qos2PortCos OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port default cos value"
|
|
::= { qos2PortTable 3 }
|
|
|
|
--xxx.100.27.1.13.4
|
|
qos2PortTrust OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
cos(0),
|
|
dscp(1)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure port trust.
|
|
cos(0),mls qos trust cos;
|
|
dscp(1),mls qos trust dscp."
|
|
::= { qos2PortTable 4 }
|
|
|
|
--xxx.100.27.1.13.5
|
|
qos2PortPolicy OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The corresponding CLI:service-policy input WORD."
|
|
::= { qos2PortTable 5 }
|
|
|
|
--xxx.100.27.1.13.6
|
|
qos2PortQueueBandwidth OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The corresponding CLI:mls qos queue {<queue id>} bandwidth {<MinBandwidth> <MaxBandwidth>}."
|
|
::= { qos2PortTable 6 }
|
|
|
|
--xxx.100.27.1.13.7
|
|
qos2PortQueueAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sp(0),
|
|
wdrr(1),
|
|
wrr(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The corresponding CLI:mls qos queue algorithm {sp |wdrr |wrr }."
|
|
::= { qos2PortTable 7 }
|
|
|
|
--xxx.100.27.1.13.8
|
|
qos2PortQueueWdrr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The corresponding CLI:mls qos queue wdrr weight {<Queue1 bandwidth> <Queue2 bandwidth> <Queue3 bandwidth> <Queue4 bandwidth> <Queue5 bandwidth> <Queue6 bandwidth> <Queue7 bandwidth> <Queue8 bandwidth>}."
|
|
::= { qos2PortTable 8 }
|
|
|
|
--xxx.100.27.1.13.9
|
|
qos2PortQueueWrr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The corresponding CLI:mls qos queue wrr weight {<Queue1 weight> <Queue2 weight> <Queue3 weight> <Queue4 weight> <Queue5 weight> <Queue6 weight> <Queue7 weight> <Queue8 weight>}."
|
|
::= { qos2PortTable 9 }
|
|
|
|
--xxx.100.27.1.13.10
|
|
qos2PortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2PortTable 10 }
|
|
|
|
|
|
--********************************************************************************************************
|
|
--xxx.100.27.1.14
|
|
qos2ClassMapTable OBJECT IDENTIFIER ::= { qos2 14 }
|
|
|
|
--xxx.100.27.1.14.1
|
|
qos2ClassMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"classmap name"
|
|
::= { qos2ClassMapTable 1}
|
|
|
|
--xxx.100.27.1.14.2
|
|
qos2ClassMapType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
configurClassMap(0),
|
|
accessGroup(1),
|
|
dscp(2),
|
|
v6dscp(5),
|
|
ippre(3),
|
|
v6AccessGroup(8),
|
|
v6Flow(7),
|
|
vlan(4),
|
|
cos(9),
|
|
exp(10)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0 class-map <class-map-name>,index is classmapname;
|
|
1 match access-group <acl-index-or-name>,need qos2ClassMapAccessGroup cooperation;
|
|
2 match ip dscp <dscp-list>,need qos2ClassMapDscp cooperation;
|
|
3 match ip precedence <ip-precedence-list>,need qos2ClassMapIpPre cooperation;
|
|
4 match vlan <vlan-list>,need qos2ClassMapVlan cooperation;
|
|
5 match ipv6 dscp <dscp-list>,need qos2ClassMapV6Dscp cooperation;
|
|
7 match ipv6 flowlabel,need qos2ClassMapV6Flow cooperation;
|
|
8 match ipv6 access-group,need qos2ClassMapV6AccGroup cooperation;
|
|
9 match cos,need qos2ClassCos cooperation;
|
|
10 match exp <exp-list>,need qos2ClassMapExp cooperation."
|
|
::= { qos2ClassMapTable 2 }
|
|
|
|
--xxx.100.27.1.14.3
|
|
qos2ClassMapAccessGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify access-group (name or number).
|
|
This object be configured only if qosClassMapType
|
|
in the same row is accessGroup(1)."
|
|
::= { qos2ClassMapTable 3 }
|
|
|
|
--xxx.100.27.1.14.4
|
|
qos2ClassMapDscp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Dscp.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is dscp(2)."
|
|
::= { qos2ClassMapTable 4 }
|
|
|
|
--xxx.100.27.1.14.5
|
|
qos2ClassMapV6Dscp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify ipv6 Dscp.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is v6dscp(5)."
|
|
::= { qos2ClassMapTable 5 }
|
|
|
|
--xxx.100.27.1.14.6
|
|
qos2ClassMapIpPre OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Ip Precedence.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is ippre(3)."
|
|
::= { qos2ClassMapTable 6 }
|
|
|
|
--xxx.100.27.1.14.7
|
|
qos2ClassMapV6AccGroup OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Ipv6 Access-Group.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is v6AccessGroup(8)."
|
|
::= { qos2ClassMapTable 7 }
|
|
|
|
--xxx.100.27.1.14.8
|
|
qos2ClassMapV6Flow OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Ipv6 Flowlabel.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is v6Flow(6)."
|
|
::= { qos2ClassMapTable 8 }
|
|
|
|
--xxx.100.27.1.14.9
|
|
qos2ClassMapVlan OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Vlan list . At most 8 vlan id.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is vlan(4)."
|
|
::= { qos2ClassMapTable 9 }
|
|
|
|
--xxx.100.27.1.1410
|
|
qos2ClassMapCos OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify Cos .
|
|
This object be configured only if qosClassMapType
|
|
in the same row is cos(9)."
|
|
::= { qos2ClassMapTable 10 }
|
|
|
|
--xxx.100.27.1.14.11
|
|
qos2ClassMapExp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Match specify MPLS EXP.
|
|
This object be configured only if qosClassMapType
|
|
in the same row is Exp(10)."
|
|
::= { qos2ClassMapTable 11 }
|
|
|
|
--xxx.100.27.1.14.12
|
|
qos2ClassMapStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2ClassMapTable 12 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.100.27.1.15
|
|
qos2PolicyTable OBJECT IDENTIFIER ::= { qos2 15 }
|
|
|
|
--xxx.100.27.1.15.1
|
|
qos2PolicyName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS Policy name"
|
|
::= { qos2PolicyTable 1 }
|
|
|
|
--xxx.100.27.1.15.2
|
|
qos2PolicyClassMap OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the classmap name.After a policy map is created, it can be associated to a class.
|
|
So, if you want the class map to match the policy map,please setting the qosPolicyType to 1,and then
|
|
setting the qosPolicyStatus to 1 ."
|
|
::= { qos2PolicyTable 2 }
|
|
|
|
--xxx.100.27.1.15.3
|
|
qos2PolicyInsertClassMap OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..64))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the position of classmap name."
|
|
::= { qos2PolicyTable 3 }
|
|
|
|
--xxx.100.27.1.15.4
|
|
qos2PolicyType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
policymap(0),
|
|
matchclassmap(1),
|
|
threeColor(2),
|
|
aggregatePolicer(3),
|
|
accounting(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the relation between qosPolicyType and CLI:
|
|
0 policy-map <policy-map-name>;
|
|
1 class <class-map-name>;
|
|
2 policy <bits_per_second> <normal_burst_bytes> [pir <peak_rate_bps>] | <maximum_burst_bytes> [{conform-action ACTION | exceed-action ACTION | violate-action ACTION }];
|
|
3 policy aggregate <aggregate-policer-name>;
|
|
4 accounting. "
|
|
::= { qos2PolicyTable 4 }
|
|
|
|
--xxx.100.27.1.15.5
|
|
qos2PolicyCIRKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CIR(Committed Information Rate) Kbits per second <1-10000000>."
|
|
::= { qos2PolicyTable 5 }
|
|
|
|
--xxx.100.27.1.15.6
|
|
qos2PolicyCBSKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CBS(Committed Burst Size) Kbits per second <1-1000000>."
|
|
::= { qos2PolicyTable 6 }
|
|
|
|
--xxx.100.27.1.15.7
|
|
qos2PolicyPBSKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..1000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PBS(Peak Burst Size) Kbits per second <1-1000000>."
|
|
::= { qos2PolicyTable 7 }
|
|
|
|
--xxx.100.27.1.15.8
|
|
qos2PolicyPIRKbps OBJECT-TYPE
|
|
SYNTAX INTEGER(1..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PIR(Peak Information Rate) Kbits per second <1-10000000>."
|
|
::= { qos2PolicyTable 8 }
|
|
|
|
--xxx.100.27.1.15.9
|
|
qos2PolicyConformActionChange OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
set-dscp-transmit(2),
|
|
set-prec-transmit(3),
|
|
set-cos-transmit(4),
|
|
set-internal-priority(5),
|
|
set-drop-Precedence(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"transmit(0): means send packets without any change;
|
|
drop(1): means drop packets;
|
|
set-dscp-transmit(2): send packets and remark dscp value;
|
|
set-prec-transmit(3): send packets and remark ip-precedence value;
|
|
set-cos-transmit(4): send packets and remark cos value;
|
|
set-internal-priority(5):send packets and remark internal-priority value ;
|
|
set-drop-Precedence(6): send packets and remark drop-precedence value."
|
|
::= { qos2PolicyTable 9 }
|
|
|
|
--xxx.100.27.1.15.10
|
|
qos2PolicyConformActionChangeValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If action is set-dscp-transmit(2),the value is between 0-63;
|
|
else if action is set-prec-transmit(3),the value is between 0-7;
|
|
else if action is set-cos-transmit(4),the value is between 0-7;
|
|
else if action is set-internal-priority(5),the value is between 0-7;
|
|
else if action is set-drop-Precedence(6),the value is between 0-2."
|
|
::= { qos2PolicyTable 10 }
|
|
|
|
--xxx.100.27.1.15.11
|
|
qos2PolicyExceedActionChange OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
set-dscp-transmit(2),
|
|
set-prec-transmit(3),
|
|
set-cos-transmit(4),
|
|
set-internal-priority(5),
|
|
set-drop-Precedence(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"transmit(0): means send packets without any change;
|
|
drop(1): means drop packets;
|
|
set-dscp-transmit(2): send packets and remark dscp value;
|
|
set-prec-transmit(3): send packets and remark ip-precedence value;
|
|
set-cos-transmit(4): send packets and remark cos value;
|
|
set-internal-priority(5):send packets and remark internal-priority value ;
|
|
set-drop-Precedence(6): send packets and remark drop-precedence value."
|
|
::= { qos2PolicyTable 11 }
|
|
|
|
--xxx.100.27.1.15.12
|
|
qos2PolicyExceedActionChangeValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If action is set-dscp-transmit(2),the value is between 0-63;
|
|
else if action is set-prec-transmit(3),the value is between 0-7;
|
|
else if action is set-cos-transmit(4),the value is between 0-7;
|
|
else if action is set-internal-priority(5),the value is between 0-7;
|
|
else if action is set-drop-Precedence(6),the value is between 0-2."
|
|
::= { qos2PolicyTable 12 }
|
|
|
|
--xxx.100.27.1.15.13
|
|
qos2PolicyViolateActionChange OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
transmit(0),
|
|
drop(1),
|
|
set-dscp-transmit(2),
|
|
set-prec-transmit(3),
|
|
set-cos-transmit(4),
|
|
set-internal-priority(5),
|
|
set-drop-Precedence(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"transmit(0): means send packets without any change;
|
|
drop(1): means drop packets;
|
|
set-dscp-transmit(2): send packets and remark dscp value;
|
|
set-prec-transmit(3): send packets and remark ip-precedence value;
|
|
set-cos-transmit(4): send packets and remark cos value;
|
|
set-internal-priority(5):send packets and remark internal-priority value ;
|
|
set-drop-Precedence(6): send packets and remark drop-precedence value."
|
|
::= { qos2PolicyTable 13 }
|
|
|
|
--xxx.100.27.1.15.14
|
|
qos2PolicyViolateActionChangeValue OBJECT-TYPE
|
|
SYNTAX INTEGER (0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If action is set-dscp-transmit(2),the value is between 0-63;
|
|
else if action is set-prec-transmit(3),the value is between 0-7;
|
|
else if action is set-cos-transmit(4),the value is between 0-7;
|
|
else if action is set-internal-priority(5),the value is between 0-7;
|
|
else if action is set-drop-Precedence(6),the value is between 0-2."
|
|
::= { qos2PolicyTable 14 }
|
|
|
|
--xxx.100.27.1.15.15
|
|
qos2PolicyAggregatePolicer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"aggregate-policer-name.
|
|
This object be configured only if qosPolicyType
|
|
in the same row is aggregatePolicer(3)."
|
|
::= { qos2PolicyTable 15 }
|
|
|
|
--xxx.100.27.1.15.16
|
|
qos2PolicyStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2PolicyTable 16 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
|
|
--********************************************************************************************************
|
|
--xxx.100.27.1.16
|
|
qos2SetTable OBJECT IDENTIFIER ::= { qos2 16 }
|
|
|
|
--xxx.100.27.1.16.1
|
|
qos2SetPolicyMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS Policy name."
|
|
::= { qos2SetTable 1 }
|
|
|
|
--xxx.100.27.1.16.2
|
|
qos2SetClassMapName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"QoS class map name."
|
|
::= { qos2SetTable 2 }
|
|
|
|
--xxx.100.27.1.16.3
|
|
qos2SetType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dscp(1),
|
|
precedence(2),
|
|
internal-priority(3),
|
|
drop-precedence(4),
|
|
nextHop(5),
|
|
v6nextHop(6),
|
|
cos(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"qos2SetType range:1,2,3,4,5,6
|
|
1 dscp Set IP DSCP (DiffServ CodePoints);
|
|
2 precedence Set IP precedence;
|
|
3 internal-priority Set internal-priority;
|
|
4 drop-precedence Set drop-precedence;
|
|
5 nexthop Set IP nexthop;
|
|
6 v6nextHop Set IPv6 nexthop;
|
|
7 cos Set CoS ."
|
|
::= { qos2SetTable 3 }
|
|
|
|
--xxx.100.27.1.16.4
|
|
qos2SetDscp OBJECT-TYPE
|
|
SYNTAX INTEGER(0..63)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark dscp for the classified flow."
|
|
::= { qos2SetTable 4 }
|
|
|
|
--xxx.100.27.1.16.5
|
|
qos2SetPrecedence OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark ip precedence for classified flow."
|
|
::= { qos2SetTable 5 }
|
|
|
|
--xxx.100.27.1.16.6
|
|
qos2SetInternalPriority OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark internal priority for classified flow."
|
|
::= { qos2SetTable 6 }
|
|
|
|
--xxx.100.27.1.16.7
|
|
qos2SetDropPrecedence OBJECT-TYPE
|
|
SYNTAX INTEGER(0..2)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark drop precedence for classified flow."
|
|
::= { qos2SetTable 7 }
|
|
|
|
--xxx.100.27.1.16.8
|
|
qos2SetDefaultPBR OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0:no set default PBR for classified flow;
|
|
1:set default PBR for classified flow."
|
|
::= { qos2SetTable 8 }
|
|
|
|
--xxx.100.27.1.16.9
|
|
qos2SetVrf OBJECT-TYPE
|
|
SYNTAX INTEGER(0..252)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"set vrf value for classified flow."
|
|
::= { qos2SetTable 9 }
|
|
|
|
--xxx.100.27.1.16.10
|
|
qos2SetnextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"set nexthop for classified flow."
|
|
::= { qos2SetTable 10 }
|
|
|
|
--xxx.100.11.1.16.11
|
|
qos2Setv6nextHop OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"set IPv6 nexthop for classified flow"
|
|
::= { qos2SetTable 11 }
|
|
|
|
--xxx.100.27.1.16.12
|
|
qos2SetCos OBJECT-TYPE
|
|
SYNTAX INTEGER(0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"remark cos for classified flow"
|
|
::= { qos2SetTable 12 }
|
|
|
|
|
|
--xxx.100.27.1.16.13
|
|
qos2SetStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
destroy(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry."
|
|
::= { qos2SetTable 13 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
-- (xxx.100.28) mabMgt group
|
|
|
|
--********************************************************************************************************
|
|
|
|
mabOnlineUserTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF mabOnlineUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Show the information of MAB users."
|
|
::= { mabMgt 1 }
|
|
|
|
mabOnlineUserEntry OBJECT-TYPE
|
|
SYNTAX mabOnlineUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
INDEX { mabOnlineUserIndex }
|
|
::= { mabOnlineUserTable 1 }
|
|
|
|
mabOnlineUserEntry
|
|
::= SEQUENCE
|
|
{
|
|
mabOnlineUserIndex INTEGER,
|
|
mabOnlineUserMac DisplayString,
|
|
mabOnlineUserName DisplayString,
|
|
mabOnlineUserPort DisplayString,
|
|
mabOnlineUserState DisplayString
|
|
}
|
|
|
|
mabOnlineUserIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The index of MAB user."
|
|
::= { mabOnlineUserEntry 1 }
|
|
|
|
mabOnlineUserMac OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The mac of MAB user."
|
|
::= { mabOnlineUserEntry 2 }
|
|
|
|
mabOnlineUserName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The username of MAB user."
|
|
::= { mabOnlineUserEntry 3 }
|
|
|
|
mabOnlineUserState OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..18))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The state of MAB user."
|
|
::= { mabOnlineUserEntry 5 }
|
|
|
|
mabOnlineUserPort OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..14))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The port for MAB user."
|
|
::= { mabOnlineUserEntry 4 }
|
|
|
|
mabSetUserOffline OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(17))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The mac of user offline."
|
|
::= { mabMgt 2 }
|
|
|
|
|
|
--trap
|
|
--xxx.101.100
|
|
antiArpscan OBJECT IDENTIFIER ::= { notifications 100 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--xxx.101.100.1
|
|
prohibitPortOID OBJECT IDENTIFIER ::= { antiArpscan 1 }
|
|
--xxx.101.100.2
|
|
recoverPortOID OBJECT IDENTIFIER ::= { antiArpscan 2 }
|
|
--xxx.101.100.3
|
|
prohibitIPOID OBJECT IDENTIFIER ::= { antiArpscan 3 }
|
|
--xxx.101.100.4
|
|
prohibitIPExceedSlimitOID OBJECT IDENTIFIER ::= { antiArpscan 4 }
|
|
--xxx.101.100.5
|
|
prohibitIPExceedHlimitOID OBJECT IDENTIFIER ::= { antiArpscan 5 }
|
|
--xxx.101.100.6
|
|
recoverIPOID OBJECT IDENTIFIER ::= { antiArpscan 6 }
|
|
--xxx.101.100.7
|
|
ipAddress OBJECT IDENTIFIER ::= { antiArpscan 7 }
|
|
|
|
--********************************************************************************************************
|
|
--********************************************************************************************************
|
|
--trap
|
|
--xxx.101.101
|
|
fan OBJECT IDENTIFIER ::= { notifications 101 }
|
|
|
|
--********************************************************************************************************
|
|
--xxx.101.101.1
|
|
fanAbnormalOID OBJECT IDENTIFIER ::= { fan 1 }
|
|
--xxx.101.101.2
|
|
fanNormalOID OBJECT IDENTIFIER ::= { fan 2 }
|
|
--xxx.101.101.3
|
|
fanInsertOID OBJECT IDENTIFIER ::= { fan 3 }
|
|
--xxx.101.101.4
|
|
fanPullOutOID OBJECT IDENTIFIER ::= { fan 4 }
|
|
|
|
--********************************************************************************************************
|
|
--trap
|
|
--xxx.101.102
|
|
power OBJECT IDENTIFIER ::= { notifications 102 }
|
|
|
|
--********************************************************************************************************
|
|
--xxx.101.102.1
|
|
powerAbnormalOID OBJECT IDENTIFIER ::= { power 1 }
|
|
--xxx.101.102.2
|
|
powerNormalOID OBJECT IDENTIFIER ::= { power 2 }
|
|
--xxx.101.102.3
|
|
powerInsertOID OBJECT IDENTIFIER ::= { power 3 }
|
|
--xxx.101.102.4
|
|
powerPullOutOID OBJECT IDENTIFIER ::= { power 4 }
|
|
|
|
--********************************************************************************************************
|
|
--trap
|
|
--xxx.101.103
|
|
slotTemperature OBJECT IDENTIFIER ::= { notifications 103 }
|
|
|
|
--********************************************************************************************************
|
|
--xxx.101.103.1
|
|
slotTemperatureHigherOID OBJECT IDENTIFIER ::= { slotTemperature 1 }
|
|
--xxx.101.103.2
|
|
slotTemperatureLowerOID OBJECT IDENTIFIER ::= { slotTemperature 2 }
|
|
|
|
--********************************************************************************************************
|
|
--trap
|
|
--xxx.101.103
|
|
-- slotTemperature OBJECT IDENTIFIER ::= { notifications 103 }
|
|
|
|
--********************************************************************************************************
|
|
|
|
--********************************************************************************************************
|
|
--trap
|
|
--xxx.101.104
|
|
dhcpsnooping OBJECT IDENTIFIER ::= { notifications 104 }
|
|
|
|
--********************************************************************************************************
|
|
--xxx.101.104.1
|
|
shutdownPort OBJECT IDENTIFIER ::= { dhcpsnooping 1 }
|
|
--xxx.101.104.2
|
|
noShutdownPort OBJECT IDENTIFIER ::= { dhcpsnooping 2 }
|
|
--xxx.101.104.3
|
|
addBlackhole OBJECT IDENTIFIER ::= { dhcpsnooping 3 }
|
|
--xxx.101.104.4
|
|
delBlackhole OBJECT IDENTIFIER ::= { dhcpsnooping 4 }
|
|
--********************************************************************************************************
|
|
|
|
--trap
|
|
--xxx.101.105
|
|
rateViolation OBJECT IDENTIFIER ::= { notifications 105 }
|
|
|
|
--********************************************************************************************************
|
|
--xxx.101.105.1
|
|
rateViolationShutdownPort OBJECT IDENTIFIER ::= { rateViolation 1 }
|
|
--xxx.101.105.2
|
|
rateViolationNoShutdownPort OBJECT IDENTIFIER ::= { rateViolation 2 }
|
|
--********************************************************************************************************
|
|
|
|
--trap
|
|
--xxx.101.106
|
|
portGroup OBJECT IDENTIFIER ::= { notifications 106 }
|
|
--********************************************************************************************************
|
|
--xxx.101.106.1
|
|
portGroupCreate OBJECT IDENTIFIER ::= { portGroup 1 }
|
|
--xxx.101.106.2
|
|
portGroupDelete OBJECT IDENTIFIER ::= { portGroup 2 }
|
|
--xxx.101.106.3
|
|
portGroupUpdate OBJECT IDENTIFIER ::= { portGroup 2 }
|
|
--********************************************************************************************************
|
|
|
|
END |