3266 lines
137 KiB
Plaintext
3266 lines
137 KiB
Plaintext
|
|
LAN-EMULATION-CLIENT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- RCSID information
|
|
|
|
-- $RCSfile: atmf-LEC2.mib,v $
|
|
-- $Revision: 1.1 $ $State: Exp $
|
|
-- $Date: 1998/12/18 07:14:01 $
|
|
-- $Author: Harry Hsu
|
|
-- atmf-LEC MIB
|
|
-- Revision: 1.00
|
|
-- Date: June, 25, 1997
|
|
-- Author: Mike Wong
|
|
-- Revision: 2.00
|
|
-- Date: October 22, 1998
|
|
|
|
IMPORTS
|
|
-- TruthValue
|
|
-- FROM RFC1253-MIB
|
|
|
|
MacAddress
|
|
FROM BRIDGE-MIB
|
|
DisplayString
|
|
FROM RFC1213-MIB
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
Counter, enterprises
|
|
FROM RFC1155-SMI
|
|
-- OwnerString
|
|
-- FROM RFC1271-MIB
|
|
-- RowStatus
|
|
-- FROM SNMPv2-TC
|
|
-- MikeWong
|
|
-- InterfaceIndex
|
|
-- FROM IF-MIB
|
|
ifIndex
|
|
FROM RFC1213-MIB;
|
|
|
|
OwnerString ::= DisplayString
|
|
|
|
TruthValue ::= INTEGER { true (1), false (2) }
|
|
|
|
RowStatus ::= INTEGER
|
|
|
|
-- All representations of MAC addresses in this MIB Module
|
|
-- use, as a textual convention (i.e. this convention does
|
|
-- not affect their encoding), the data type:
|
|
|
|
-- MacAddress ::= OCTET STRING (SIZE (6))
|
|
-- a 6 octet address
|
|
-- in the
|
|
-- "canonical"
|
|
-- order
|
|
-- defined by IEEE 802.1a, i.e., as if it were transmitted
|
|
-- least significant bit first, even though 802.5 (in
|
|
-- contrast to other n802.x protocols) requires MAC
|
|
-- addresses to be transmitted most significant bit first.
|
|
--
|
|
-- 16-bit addresses, if needed, are represented by setting
|
|
-- their upper 4 octets to all 0's, i.e., AAFF would be
|
|
-- represented as 00000000AAFF.
|
|
|
|
|
|
atmForum OBJECT IDENTIFIER ::= { enterprises 353 }
|
|
atmForumNetworkManagement OBJECT IDENTIFIER ::= { atmForum 5 }
|
|
atmfLanEmulation OBJECT IDENTIFIER ::= { atmForumNetworkManagement 3 }
|
|
-- atmfLanEmulation OBJECT IDENTIFIER ::= { enterprises atmForum (353) atmForumNetworkManagement(5) 3 }
|
|
|
|
-- created from leClientMIB (9505100000Z)
|
|
|
|
leClientMIB OBJECT IDENTIFIER ::= { atmfLanEmulation 1 }
|
|
|
|
leClientMIBObjects OBJECT IDENTIFIER ::= { leClientMIB 1 }
|
|
|
|
AtmLaneAddress ::= OCTET STRING
|
|
|
|
VpiInteger ::= INTEGER
|
|
|
|
VciInteger ::= INTEGER
|
|
|
|
LeConnectionInterface ::= INTEGER
|
|
|
|
LecState ::= INTEGER {
|
|
initialState(1),
|
|
lecsConnect(2),
|
|
configure(3),
|
|
join(4),
|
|
initialRegistration(5),
|
|
busConnect(6),
|
|
operational(7)
|
|
}
|
|
|
|
LecDataFrameFormat ::= INTEGER {
|
|
unspecified(1),
|
|
aflane8023(2),
|
|
aflane8025(3)
|
|
}
|
|
|
|
LecDataFrameSize ::= INTEGER {
|
|
unspecified(1),
|
|
max1516(2),
|
|
max4544(3),
|
|
max9234(4),
|
|
max18190(5),
|
|
|
|
-- MikeWong
|
|
-- LANE 2.0
|
|
max1580(6)
|
|
}
|
|
|
|
LeArpTableEntryType ::= INTEGER {
|
|
other(1),
|
|
learnedViaControl(2),
|
|
learnedViaData(3),
|
|
staticVolatile(4),
|
|
staticNonVolatile(5)
|
|
}
|
|
|
|
lecConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LecConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table describing all of the LAN Emulation Clients
|
|
implemented by this host. Each LE Client has a row
|
|
in the MIB-II/RFC 1573 Interfaces table (describing
|
|
the emulated packet interface it presents to higher
|
|
layers). Each LE Client also has a row in this and
|
|
other LEC MIB tables (describing its interface with
|
|
other LAN Emulation components).
|
|
This table contains configuration variables. Three
|
|
extension tables contain client status, performance
|
|
statistics, and information about control/multicast
|
|
VCCs.
|
|
Unlike hardware ports, LE Clients can be created by
|
|
management. However, the RFC 1573 Interfaces table
|
|
does not directly support row creation. Therefore,
|
|
creating or deleting a row in the lecConfigTable is
|
|
defined to have the side effect of creating or
|
|
deleting corresponding rows in
|
|
|
|
- the MIB-II / RFC 1573 Interfaces table,
|
|
- the 'lecMappingTable',
|
|
- the 'lecStatusTable',
|
|
- the 'lecServerVccTable',
|
|
- the 'lecStatisticsTable', and
|
|
- any other dependent tables
|
|
New Interfaces table rows for LAN Emulation Clients
|
|
always have 'ifAdminStatus' set to 'down'.
|
|
|
|
A Note On Indexing:
|
|
-------------------
|
|
Most of the tables in this MIB are indexed in whole
|
|
or in part by 'lecIndex' - not by 'ifIndex'.
|
|
Why is there a separate index?
|
|
Traditionally, ifIndex values are chosen by agents,
|
|
and are permitted to change across restarts. Using
|
|
ifIndex to index lecConfigTable could complicate
|
|
row creation and/or cause interoperability problems
|
|
(if each agent had special restrictions on ifIndex).
|
|
Having a separate index avoids these problems."
|
|
::= { leClientMIBObjects 1 }
|
|
|
|
lecConfigEntry OBJECT-TYPE
|
|
SYNTAX LecConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each table entry contains configuration information
|
|
for one LAN Emulation Client.
|
|
Most of the objects are derived from Initial State
|
|
Parameters in the LAN Emulation specification."
|
|
INDEX { lecIndex }
|
|
::= { lecConfigTable 1 }
|
|
|
|
LecConfigEntry ::= SEQUENCE {
|
|
lecIndex
|
|
INTEGER,
|
|
lecRowStatus
|
|
RowStatus,
|
|
lecOwner
|
|
OwnerString,
|
|
lecConfigMode
|
|
INTEGER,
|
|
lecConfigLanType
|
|
LecDataFrameFormat,
|
|
lecConfigMaxDataFrameSize
|
|
LecDataFrameSize,
|
|
lecConfigLanName
|
|
DisplayString,
|
|
lecConfigLesAtmAddress
|
|
AtmLaneAddress,
|
|
lecControlTimeout
|
|
INTEGER,
|
|
lecMaxUnknownFrameCount
|
|
INTEGER,
|
|
lecMaxUnknownFrameTime
|
|
INTEGER,
|
|
lecVccTimeoutPeriod
|
|
INTEGER (-2147483648..2147483647),
|
|
lecMaxRetryCount
|
|
INTEGER,
|
|
lecAgingTime
|
|
INTEGER,
|
|
lecForwardDelayTime
|
|
INTEGER,
|
|
lecExpectedArpResponseTime
|
|
INTEGER,
|
|
lecFlushTimeOut
|
|
INTEGER,
|
|
lecPathSwitchingDelay
|
|
INTEGER,
|
|
lecLocalSegmentID
|
|
INTEGER,
|
|
lecMulticastSendType
|
|
INTEGER,
|
|
lecMulticastSendAvgRate
|
|
INTEGER (-2147483648..2147483647),
|
|
lecMulticastSendPeakRate
|
|
INTEGER (-2147483648..2147483647),
|
|
lecConnectionCompleteTimer
|
|
INTEGER,
|
|
|
|
-- MikeWong
|
|
-- LANE 1.0 addendum
|
|
lecConfigLecsAtmAddress
|
|
AtmLaneAddress,
|
|
|
|
-- MikeWong
|
|
-- LANE 2.0
|
|
lecInitialControlTimeout INTEGER,
|
|
lecControlTimeoutMultiplier INTEGER,
|
|
lecV2MaxUnknownFrameCount INTEGER,
|
|
lecConfigLocalSegmentID INTEGER,
|
|
lecConfigV2Capable TruthValue,
|
|
lecConfigSelectiveMulticast TruthValue,
|
|
lecForwardDisconnectTimeout INTEGER,
|
|
lecConfigLLCMultiplexCapable TruthValue,
|
|
lecMinReconfigureDelay INTEGER,
|
|
lecMaxReconfigureDelay INTEGER,
|
|
lecMaxBusConnectRetries INTEGER,
|
|
lecTokenRingExplorerExclude TruthValue
|
|
|
|
}
|
|
|
|
lecIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value which uniquely identifies this conceptual
|
|
row in the lecConfigTable.
|
|
If the conceptual row identified by this value of
|
|
lecIndex is recreated following an agent restart,
|
|
the same value of lecIndex must be used to identify
|
|
the recreated row. (However, the Interfaces table
|
|
index associated with the client may change.)"
|
|
::= { lecConfigEntry 1 }
|
|
|
|
lecRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object lets network managers create and delete
|
|
LAN Emulation Clients, on systems that support this
|
|
optional capability.
|
|
It does not control Joins and Terminations; they are
|
|
controlled by 'ifAdminStatus'. However, taking rows
|
|
out of service will have the side effect of changing
|
|
their 'ifAdminStatus' values to 'down', thus causing
|
|
any active emulated LAN connections to be terminated.
|
|
Within each conceptual lecConfigTable row, objects
|
|
which are writable may be modified regardless of the
|
|
value of lecRowStatus. It is not necessary to set a
|
|
row's status to 'notInService' first.
|
|
When creating a LAN Emulation Client, it is up to the
|
|
management station to determine a suitable 'lecIndex'.
|
|
To facilitate interoperability, agents should not put
|
|
any restrictions on the 'lecIndex' beyond the obvious
|
|
ones that it be valid and unused.
|
|
If you create a LAN Emulation Client via this object,
|
|
it will initially have
|
|
'ifAdminStatus' = 'down'
|
|
'ifOperStatus' = 'down'
|
|
'lecInterfaceState' = 'initialState' "
|
|
::= { lecConfigEntry 2 }
|
|
|
|
lecOwner OBJECT-TYPE
|
|
SYNTAX OwnerString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The entity that configured this entry and is therefore
|
|
using the resources assigned to it."
|
|
::= { lecConfigEntry 3 }
|
|
|
|
lecConfigMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
automatic(1),
|
|
manual(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether this LAN Emulation Client should
|
|
auto-configure the next time it is (re)started.
|
|
In automatic(1) mode, a client uses a LAN Emulation
|
|
Configuration Server to learn the ATM address of its
|
|
LAN Emulation Server, and to obtain other parameters.
|
|
lecConfig{ LanType, MaxDataFrameSize, LanName } are
|
|
used in the Configure request. lecConfigLesAtmAddress
|
|
is ignored.
|
|
In manual(2) mode, management tells the client the
|
|
ATM address of its LAN Emulation Server and the
|
|
values of other parameters.
|
|
lecConfig{ LanType, MaxDataFrameSize, LanName } are
|
|
used in the Join request. lecConfigLesAtmAddress
|
|
tells the client which LES to call."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Sections 3.4.1.1 and 5.3"
|
|
DEFVAL { automatic }
|
|
::= { lecConfigEntry 4 }
|
|
|
|
lecConfigLanType OBJECT-TYPE
|
|
SYNTAX LecDataFrameFormat
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C2c LAN Type (configured).
|
|
|
|
The data frame format which this client will use the
|
|
next time it returns to the Initial State.
|
|
|
|
Auto-configuring clients use this parameter in their
|
|
Configure requests. Manually-configured clients use
|
|
it in their Join requests.
|
|
|
|
This MIB object will not be overwritten with the new
|
|
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
|
|
lecActualLanType will be."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0
|
|
and V2.0, Section 5.1.1"
|
|
DEFVAL { unspecified }
|
|
::= { lecConfigEntry 5 }
|
|
|
|
lecConfigMaxDataFrameSize OBJECT-TYPE
|
|
SYNTAX LecDataFrameSize
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C3c Maximum Data Frame Size (configured).
|
|
|
|
The maximum data frame size which this client will
|
|
use the next time it returns to the Initial State.
|
|
|
|
Auto-configuring clients use this parameter in their
|
|
Configure requests. Manually-configured clients use
|
|
it in their Join requests.
|
|
|
|
This MIB object will not be overwritten with the new
|
|
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
|
|
lecActualMaxDataFrameSize will be."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0
|
|
and V2.0, Section 5.1.1"
|
|
DEFVAL { unspecified }
|
|
::= { lecConfigEntry 6 }
|
|
|
|
lecConfigLanName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
|
|
DESCRIPTION
|
|
"C5c ELAN Name (configured).
|
|
|
|
The ELAN Name this client will use the next time it
|
|
returns to the Initial State.
|
|
|
|
Auto-configuring clients use this parameter in their
|
|
Configure requests. Manually-configured clients use
|
|
it in their Join requests.
|
|
|
|
This MIB object will not be overwritten with the new
|
|
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
|
|
lecActualLanName will be."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0
|
|
and V2.0, Section 5.1.1"
|
|
::= { lecConfigEntry 7 }
|
|
|
|
lecConfigLesAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C9 LE Server ATM Address.
|
|
The LAN Emulation Server which this client will use
|
|
the next time it is started in manual configuration
|
|
mode.
|
|
When lecConfigMode is 'automatic', there is no need
|
|
to set this address, and no advantage to doing so.
|
|
The client will use the LECS to find a LES, putting
|
|
the auto-configured address in lecActualLesAtmAddress
|
|
while leaving lecConfigLesAtmAddress alone."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecConfigEntry 8 }
|
|
|
|
lecControlTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER -- UNITS seconds
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C7 Control Time-out. Time out period used for
|
|
timing out most request/response control frame
|
|
interactions, as specified elsewhere [in the
|
|
LAN Emulation specification].
|
|
This time value is expressed in seconds."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
-- LANE V1.0
|
|
-- DEFVAL { 120 }
|
|
DEFVAL { 30 }
|
|
::= { lecConfigEntry 9 }
|
|
|
|
lecMaxUnknownFrameCount OBJECT-TYPE
|
|
SYNTAX INTEGER -- UNITS frames
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C10 Maximum Unknown Frame Count. See the description
|
|
of lecMaxUnknownFrameTime below."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
DEFVAL { 1 }
|
|
::= { lecConfigEntry 10 }
|
|
|
|
lecMaxUnknownFrameTime OBJECT-TYPE
|
|
SYNTAX INTEGER -- UNITS seconds
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C11 Maximum Unknown Frame Time. Within the period of
|
|
time defined by the Maximum Unknown Frame Time, a
|
|
LE Client will send no more than Maximum Unknown
|
|
Frame Count frames to the BUS for a given unicast
|
|
LAN Destination, and it must also initiate the
|
|
address resolution protocol to resolve that LAN
|
|
Destination.
|
|
This time value is expressed in seconds."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
DEFVAL { 1 }
|
|
::= { lecConfigEntry 11 }
|
|
|
|
lecVccTimeoutPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (-2147483648..2147483647) -- UNITS seconds
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C12 VCC Time-out Period. A LE Client SHOULD release
|
|
any Data Direct VCC that it has not used to
|
|
transmit or receive any data frames for the
|
|
length of the VCC Time-out Period. This parameter
|
|
is only meaningful for SVC Data Direct VCCs.
|
|
This time value is expressed in seconds. The default
|
|
value is 20 minutes. A value of 0 seconds means that
|
|
the timeout period is infinite. Negative values will
|
|
be rejected by the agent."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
DEFVAL { 1200 }
|
|
::= { lecConfigEntry 12 }
|
|
|
|
lecMaxRetryCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C13 Maximum Retry Count. A LE CLient MUST not retry
|
|
a LE_ARP_REQUEST for a given frame's LAN
|
|
destination more than Maximum Retry Count times,
|
|
after the first LE_ARP_REQUEST for that same
|
|
frame's LAN destination."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
DEFVAL { 1 }
|
|
::= { lecConfigEntry 13 }
|
|
|
|
lecAgingTime OBJECT-TYPE
|
|
SYNTAX INTEGER -- UNITS seconds
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C17 Aging Time. The maximum time that a LE Client
|
|
will maintain an entry in its LE_ARP cache in
|
|
the absence of a verification of that
|
|
relationship.
|
|
This time value is expressed in seconds."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
DEFVAL { 300 }
|
|
::= { lecConfigEntry 14 }
|
|
|
|
lecForwardDelayTime OBJECT-TYPE
|
|
SYNTAX INTEGER -- UNITS seconds
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C18 Forward Delay Time. The maximum time that a LE
|
|
Client will maintain an entry for a non-local MAC
|
|
address in its LE_ARP cache in the absence of a
|
|
verification of that relationship, as long as the
|
|
Topology Change flag C19 is true.
|
|
lecForwardDelayTime SHOULD BE less than lecAgingTime.
|
|
When it is not, lecAgingTime governs LE_ARP aging.
|
|
This time value is expressed in seconds."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
DEFVAL { 15 }
|
|
::= { lecConfigEntry 15 }
|
|
|
|
lecExpectedArpResponseTime OBJECT-TYPE
|
|
SYNTAX INTEGER -- UNITS seconds
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C20 Expected LE_ARP Reponse Time. The maximum time
|
|
that the LEC expects an LE_ARP_REQUEST/
|
|
LE_ARP_RESPONSE cycle to take. Used for retries
|
|
and verifies.
|
|
This time value is expressed in seconds."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
DEFVAL { 1 }
|
|
::= { lecConfigEntry 16 }
|
|
|
|
lecFlushTimeOut OBJECT-TYPE
|
|
SYNTAX INTEGER -- UNITS seconds
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C21 Flush Time-out. Time limit to wait to receive a
|
|
LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has
|
|
been sent before taking recovery action.
|
|
This time value is expressed in seconds."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
DEFVAL { 4 }
|
|
::= { lecConfigEntry 17 }
|
|
|
|
lecPathSwitchingDelay OBJECT-TYPE
|
|
SYNTAX INTEGER -- UNITS seconds
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C22 Path Switching Delay. The time since sending a
|
|
frame to the BUS after which the LE Client may
|
|
assume that the frame has been either discarded
|
|
or delivered to the recipient. May be used to
|
|
bypass the Flush protocol.
|
|
This time value is expressed in seconds."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
DEFVAL { 6 }
|
|
::= { lecConfigEntry 18 }
|
|
|
|
lecLocalSegmentID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C23 Local Segment ID. The segment ID of the emulated
|
|
LAN. This is only required for IEEE 802.5 clients
|
|
that are Source Routing bridges.
|
|
|
|
This object has been deprecated and replaced by a pair
|
|
of Config/Actual objects. It shouldn't be implemented
|
|
except as required for backwards compatibility."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecConfigEntry 19 }
|
|
|
|
lecMulticastSendType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bestEffort(1),
|
|
variableBitRate(2),
|
|
constantBitRate(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C24 Multicast Send VCC Type. Signalling parameter
|
|
that SHOULD be used by the LE Client when
|
|
establishing the Multicast Send VCC.
|
|
This is the method to be used by the LE Client
|
|
when specifying traffic parameters when it sets
|
|
up the Multicast Send VCC for this emulated LAN."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecConfigEntry 20 }
|
|
|
|
lecMulticastSendAvgRate OBJECT-TYPE
|
|
SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells per second
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C25 Multicast Send VCC AvgRate. Signalling parameter
|
|
that SHOULD be used by the LE Client when
|
|
establishing the Multicast Send VCC.
|
|
Forward and Backward Sustained Cell Rate to be
|
|
requested by LE Client when setting up Multicast
|
|
Send VCC, if using Variable bit rate codings."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecConfigEntry 21 }
|
|
|
|
lecMulticastSendPeakRate OBJECT-TYPE
|
|
SYNTAX INTEGER (-2147483648..2147483647) -- UNITS cells per second
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C26 Multicast Send VCC PeakRate. Signalling parameter
|
|
that SHOULD be used by the LE Client when
|
|
establishing the Multicast Send VCC.
|
|
Forward and Backward Peak Cell Rate to be
|
|
requested by LE Client when setting up the
|
|
Multicast Send VCC when using either Variable or
|
|
Constant bit rate codings."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecConfigEntry 22 }
|
|
|
|
lecConnectionCompleteTimer OBJECT-TYPE
|
|
SYNTAX INTEGER -- UNITS seconds
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C28 Connection Complete Timer. Optional. In
|
|
Connection Establishment this is the time period
|
|
in which data or a READY_IND message is expected
|
|
from a Calling Party.
|
|
This time value is expressed in seconds."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
DEFVAL { 4 }
|
|
::= { lecConfigEntry 23 }
|
|
|
|
-- MikeWong
|
|
-- LANE 2.0
|
|
|
|
lecConfigLecsAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LE Configuration Server ATM address.
|
|
|
|
A manually-configured LECS address that this client
|
|
may use in its attempts at auto-configuration."
|
|
REFERENCE
|
|
"LANE 1.0 addendum"
|
|
::= { lecConfigEntry 24 }
|
|
|
|
lecInitialControlTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1..10 ) -- UNITS "seconds"
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C7i Initial Control Time-out.
|
|
|
|
In LANE V2.0, control time-out consists of an initial
|
|
time-out of C7i seconds, a retry multiplier (or
|
|
logarithmic back-off base) of C7x, and a cumulative
|
|
maximum time-out of C7 seconds."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
DEFVAL { 5 }
|
|
::= { lecConfigEntry 25 }
|
|
|
|
lecControlTimeoutMultiplier OBJECT-TYPE
|
|
SYNTAX INTEGER ( 2..5 ) -- UNITS "seconds"
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C7x Control Time-out Multiplier.
|
|
|
|
In LANE V2.0, control time-out consists of an initial
|
|
time-out of C7i seconds, a retry multiplier (or
|
|
logarithmic back-off base) of C7x, and a cumulative
|
|
maximum time-out of C7 seconds."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
DEFVAL { 2 }
|
|
::= { lecConfigEntry 26 }
|
|
|
|
lecV2MaxUnknownFrameCount OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1..20 ) -- UNITS "frames"
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C10 Maximum Unknown Frame Count. See the description
|
|
of lecMaxUnknownFrameTime above.
|
|
|
|
This object may be used with both LANE V1.0 clients &
|
|
LANE V2.0 clients. For LANE V1.0 clients, this value
|
|
should be in the range 1..10, with a default of 1."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
DEFVAL { 10 }
|
|
::= { lecConfigEntry 27 }
|
|
|
|
lecConfigLocalSegmentID OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..4095 )
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C23c Local Segment ID (configured). The segment ID of
|
|
the emulated LAN. This is only required for IEEE
|
|
802.5 clients that are Source Routing bridges.
|
|
|
|
A setting which this client will use the next time it
|
|
returns to the Initial State.
|
|
|
|
This MIB object will not be overwritten with the new
|
|
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
|
|
lecActualLocalSegmentID will be."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecConfigEntry 28 }
|
|
|
|
lecConfigV2Capable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C29c V2 Capable (configured).
|
|
|
|
A setting which this client will use the next time it
|
|
returns to the Initial State.
|
|
|
|
Indicates whether this client is set up to behave as
|
|
a LANE V2 client.
|
|
|
|
This MIB object will not be overwritten with the new
|
|
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
|
|
lecActualV2Capable will be."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecConfigEntry 29 }
|
|
|
|
lecConfigSelectiveMulticast OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C32c Selective Multicast (configured).
|
|
|
|
A setting which this client will use the next time it
|
|
returns to the Initial State.
|
|
|
|
Indicates if this client is configured to register to
|
|
receive specific multicast destination MAC addresses.
|
|
Must not be 'true' if lecConfigV2Capable is 'false'.
|
|
|
|
This MIB object will not be overwritten with the new
|
|
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
|
|
lecActualSelectiveMulticast will be."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecConfigEntry 30 }
|
|
|
|
lecForwardDisconnectTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER ( 10..300 ) -- UNITS "seconds"
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C33 Forward Disconnect Time-out
|
|
|
|
If the LE Client detects that the BUS has had no
|
|
Multicast Forward VCCs to the LE Client for time
|
|
Forward Disconnect Time-out, the LE Client MUST
|
|
disconnect from the BUS and try to re-establish
|
|
a new connection."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
DEFVAL { 60 }
|
|
::= { lecConfigEntry 31 }
|
|
|
|
lecConfigLLCMultiplexCapable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C34c LLC Multiplex Capable (configured).
|
|
|
|
A setting which this client will use the next time it
|
|
returns to the Initial State.
|
|
|
|
Gives a network manager an optional method to disable
|
|
LLC multiplexing on a LANE V2 client that supports it.
|
|
Cannot be used to enable LLC multiplexing on products
|
|
that do not support it.
|
|
|
|
This MIB object will not be overwritten with the new
|
|
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
|
|
lecActualLLCMultiplexCapable will be."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecConfigEntry 32 }
|
|
|
|
lecMinReconfigureDelay OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1..10000 ) -- UNITS "milliseconds"
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C37 Minimum Reconfigure Delay.
|
|
|
|
The minimum time that a LE client must wait before
|
|
retrying reconfiguration. This setting must be
|
|
less than or equal to lecMaxReconfigureDelay."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
DEFVAL { 1 }
|
|
::= { lecConfigEntry 33 }
|
|
|
|
lecMaxReconfigureDelay OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1..10000 ) -- UNITS "milliseconds"
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C38 Maximum Reconfigure Delay.
|
|
|
|
The maximum time that a LE client must wait before
|
|
retrying reconfiguration. This setting must be
|
|
greater than or equal to lecMinReconfigureDelay."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
DEFVAL { 5000 }
|
|
::= { lecConfigEntry 34 }
|
|
|
|
lecMaxBusConnectRetries OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..2 )
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C39 Maximum BUS Connect Retries.
|
|
|
|
The maximum number of times that a LE Client can try
|
|
to establish the Default Multicast Send VCC before
|
|
returning to the configuration procedure."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
|
|
DEFVAL { 1 }
|
|
::= { lecConfigEntry 35 }
|
|
|
|
lecTokenRingExplorerExclude OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C40 Token Ring Explorer Frame Exclude.
|
|
|
|
This indicates whether or not the LE Client wishes to
|
|
receive Token Ring explorer frames other than those
|
|
directed to one of its registered MAC addresses.
|
|
Normally, only bridges need to receive such explorer
|
|
frames. This parameter only applies to token-ring
|
|
ELANs. This parameter MUST NOT change without
|
|
restarting the Configure phase."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecConfigEntry 36 }
|
|
|
|
|
|
---------------
|
|
-- Status Group
|
|
lecStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LecStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A read-only table containing identification, status,
|
|
and operational information about the LAN Emulation
|
|
Clients this agent manages."
|
|
::= { leClientMIBObjects 2 }
|
|
|
|
lecStatusEntry OBJECT-TYPE
|
|
SYNTAX LecStatusEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each table entry contains information about one LAN
|
|
Emulation Client."
|
|
INDEX { lecIfIndex }
|
|
::= { lecStatusTable 1 }
|
|
|
|
LecStatusEntry ::=
|
|
SEQUENCE {
|
|
lecIfIndex
|
|
INTEGER (-2147483648..2147483647),
|
|
lecPrimaryAtmAddress
|
|
AtmLaneAddress,
|
|
lecID
|
|
INTEGER,
|
|
lecInterfaceState
|
|
LecState,
|
|
lecLastFailureRespCode
|
|
INTEGER,
|
|
lecLastFailureState
|
|
LecState,
|
|
lecProtocol
|
|
INTEGER,
|
|
lecVersion
|
|
INTEGER,
|
|
lecTopologyChange
|
|
TruthValue,
|
|
lecConfigServerAtmAddress
|
|
AtmLaneAddress,
|
|
lecConfigSource
|
|
INTEGER,
|
|
lecActualLanType
|
|
LecDataFrameFormat,
|
|
lecActualMaxDataFrameSize
|
|
LecDataFrameSize,
|
|
lecActualLanName
|
|
DisplayString,
|
|
lecActualLesAtmAddress
|
|
AtmLaneAddress,
|
|
lecProxyClient
|
|
TruthValue,
|
|
|
|
-- MikeWong
|
|
-- LANE V2.0
|
|
|
|
lecActualLocalSegmentID INTEGER,
|
|
lecActualV2Capable TruthValue,
|
|
lecElanID
|
|
INTEGER (-2147483648..2147483647),
|
|
lecActualSelectiveMulticast TruthValue,
|
|
lecActualLLCMultiplexCapable TruthValue,
|
|
lecPreferredLesAddress AtmLaneAddress,
|
|
lecStoresServiceCategories TruthValue
|
|
|
|
}
|
|
|
|
lecIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (-2147483648..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the logical interface number
|
|
('ifIndex') assigned to this client, and is used to
|
|
identify corresponding rows in the Interfaces MIB.
|
|
Note that re-initialization of the management agent
|
|
may cause a client's 'lecIfIndex' to change."
|
|
::= { lecStatusEntry 1 }
|
|
|
|
lecPrimaryAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C1 LE Client's ATM Addresses.
|
|
The primary ATM address of this LAN Emulation Client.
|
|
This address is used to establish the Control Direct
|
|
and Multicast Send VCCs, and may also be used to set
|
|
up Data Direct VCCs.
|
|
A client may have additional ATM addresses for use
|
|
with Data Direct VCCs. These addresses are readable
|
|
via the lecAtmAddressTable."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 2 }
|
|
|
|
lecID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C14 LE Client Identifier. Each LE Client requires a
|
|
LE Client Identifier (LECID) assigned by the LE
|
|
Server during the Join phase. The LECID is placed
|
|
in control requests by the LE Client and MAY be
|
|
used for echo suppression on multicast data frames
|
|
sent by that LE Client. This value MUST NOT
|
|
change without terminating the LE Client and
|
|
returning to the Initial state. A valid LECID
|
|
MUST be in the range X'0001' through X'FEFF'.
|
|
The value of this object is only meaningful for a LEC
|
|
that is connected to a LES. For a LEC which does not
|
|
belong to an emulated LAN, the value of this object
|
|
is defined to be 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 3 }
|
|
|
|
lecInterfaceState OBJECT-TYPE
|
|
SYNTAX LecState
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The mandatory state of the LAN Emulation Client.
|
|
Note that 'ifOperStatus' is defined to be 'up' when,
|
|
and only when, 'lecInterfaceState' is 'operational'."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0.
|
|
Section 2.3.1"
|
|
::= { lecStatusEntry 4 }
|
|
|
|
lecLastFailureRespCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
timeout(2),
|
|
undefinedError(3),
|
|
versionNotSupported(4),
|
|
invalidRequestParameters(5),
|
|
duplicateLanDestination(6),
|
|
duplicateAtmAddress(7),
|
|
insufficientResources(8),
|
|
accessDenied(9),
|
|
invalidRequesterId(10),
|
|
invalidLanDestination(11),
|
|
invalidAtmAddress(12),
|
|
noConfiguration(13),
|
|
leConfigureError(14),
|
|
insufficientInformation(15),
|
|
|
|
-- MikeWong
|
|
-- LANE V2.0
|
|
--
|
|
tlvNotFound(16)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Status code from the last failed Configure response
|
|
or Join response. Failed responses are those for
|
|
which the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE
|
|
frame contains a non-zero code, or fails to arrive
|
|
within a timeout period.
|
|
If none of this client's requests have failed, this
|
|
object has the value 'none'.
|
|
If the failed response contained a STATUS code that
|
|
is not defined in the LAN Emulation specification,
|
|
this object has the value 'undefinedError'.
|
|
The value 'timeout' is self-explanatory.
|
|
Other failure codes correspond to those defined in
|
|
the specification, although they may have different
|
|
numeric values."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 4.2, Table 13"
|
|
::= { lecStatusEntry 5 }
|
|
|
|
lecLastFailureState OBJECT-TYPE
|
|
SYNTAX LecState
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The state this client was in when it updated the
|
|
'lecLastFailureRespCode'.
|
|
If 'lecLastFailureRespCode' is 'none', this object
|
|
has the value initialState(1)."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.3.1"
|
|
::= { lecStatusEntry 6 }
|
|
|
|
lecProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LAN Emulation protocol which this client supports,
|
|
and specifies in its LE_JOIN_REQUESTs."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 4.2"
|
|
::= { lecStatusEntry 7 }
|
|
|
|
lecVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LAN Emulation protocol version which this client
|
|
supports, and specifies in its LE_JOIN_REQUESTs."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 4.2"
|
|
::= { lecStatusEntry 8 }
|
|
|
|
lecTopologyChange OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C19 Topology Change. Boolean indication that the LE
|
|
Client is using the Forward Delay Time C18,
|
|
instead of the Aging Time C17, to age non-local
|
|
entries in its LE_ARP cache C16.
|
|
For a client which is not connected to the LES, this
|
|
object is defined to have the value 'false'."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0.
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 9 }
|
|
|
|
lecConfigServerAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ATM address of the LAN Emulation Configuration
|
|
Server (if known) or the empty string (otherwise)."
|
|
::= { lecStatusEntry 10 }
|
|
|
|
lecConfigSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
gotAddressViaIlmi(1),
|
|
usedWellKnownAddress(2),
|
|
usedLecsPvc(3),
|
|
didNotUseLecs(4),
|
|
usedConfiguredAddress(5),
|
|
configInProgress(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether this LAN Emulation Client used the
|
|
LAN Emulation Configuration Server, and, if so, what
|
|
method it used to establish the Configuration Direct
|
|
VCC.
|
|
|
|
The value 'configInProgress' indicates configuration
|
|
is in progress, and may be used to troubleshoot LECs
|
|
that get stuck in the configuration phase."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.2; LANE 1.0 and LEC MIB 1.0 addendums"
|
|
::= { lecStatusEntry 11 }
|
|
|
|
lecActualLanType OBJECT-TYPE
|
|
SYNTAX LecDataFrameFormat
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C2 LAN Type.
|
|
The data frame format that this LAN Emulation Client
|
|
is using right now. This may come from
|
|
* lecConfigLanType,
|
|
* the LAN Emulation Configuration Server, or
|
|
* the LAN Emulation Server
|
|
This value is related to 'ifMtu' and 'ifType'. See
|
|
the LEC management specification for more details."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 12 }
|
|
|
|
lecActualMaxDataFrameSize OBJECT-TYPE
|
|
SYNTAX LecDataFrameSize
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C3 Maximum Data Frame Size.
|
|
The maximum data frame size that this LAN Emulation
|
|
client is using right now. This may come from
|
|
* lecConfigMaxDataFrameSize,
|
|
* the LAN Emulation Configuration Server, or
|
|
* the LAN Emulation Server "
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 13 }
|
|
|
|
lecActualLanName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C5 ELAN Name.
|
|
The identity of the emulated LAN which this client
|
|
last joined, or wishes to join. This may come from
|
|
|
|
* lecConfigLanName
|
|
* the LAN Emulation Configuration Server, or
|
|
* the LAN Emulation Server "
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 14 }
|
|
|
|
lecActualLesAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C9 LE Server ATM Address.
|
|
The LAN Emulation Server address currently in use or
|
|
most recently attempted.
|
|
If no LAN Emulation Server attachment has been tried,
|
|
this object's value is the zero-length string."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 15 }
|
|
|
|
lecProxyClient OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C4 Proxy.
|
|
Indicates whether this client is acting as a proxy.
|
|
Proxy clients are allowed to represent unregistered
|
|
MAC addresses, and receive copies of LE_ARP_REQUEST
|
|
frames for such addresses."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 16 }
|
|
|
|
-- MikeWong
|
|
-- LANE 2.0
|
|
lecActualLocalSegmentID OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..4095 )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C23 Local Segment ID. The segment ID of the emulated
|
|
LAN. This is only required for IEEE 802.5 clients
|
|
that are Source Routing bridges."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 17 }
|
|
|
|
lecActualV2Capable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C29 V2 Capable.
|
|
|
|
If set, the LE Client must exhibit LANE v2 behavior
|
|
where it differs in its requirements from LANE v1
|
|
behavior. If clear, the LE Client must exhibit LANE
|
|
v1 behavior in those cases. This variable is set or
|
|
cleared according to the presence or absence of the
|
|
V2 Required FLAGS bit in the LE_JOIN_RESPONSE."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 18 }
|
|
|
|
lecElanID OBJECT-TYPE
|
|
SYNTAX INTEGER (-2147483648..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C31 ELAN-ID.
|
|
|
|
The ELAN-ID to be used in all LANE LLC-multiplexed
|
|
data frames sent or received by this client. This
|
|
object takes the value 0 if the LES is a LANE V1.0
|
|
LES. The initial value of this object is 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 19 }
|
|
|
|
lecActualSelectiveMulticast OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C32 Selective Multicast.
|
|
|
|
This indicates whether or not the LE Client will
|
|
register to receive specific multicast destination
|
|
MAC addresses. If this flag is set, the LE Client
|
|
MUST issue a LE_REGISTER_REQUEST for all of the
|
|
multicast or group MAC adddresses in C15, except
|
|
for the broadcast MAC address. If this variable is
|
|
clear, the LE Client MUST NOT issue a
|
|
LE_REGISTER_REQUEST for any multicast MAC address,
|
|
and can expect to receive all multicast frames from
|
|
the BUS."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 20 }
|
|
|
|
lecActualLLCMultiplexCapable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C34 LLC Multiplex Capable.
|
|
|
|
If set, this variable indicates that the LE Client
|
|
can accept and process LLC-multiplexed Data Direct
|
|
VCCs. If clear, it indicates that the LE Client
|
|
will refuse to accept LLC-multiplexed Data Direct
|
|
VCCs. This variable MUST be clear if the LE Client
|
|
is connected to a LANE v1 LES."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 21 }
|
|
|
|
lecPreferredLesAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"C35 Preferred LES Address.
|
|
|
|
The ATM address of the preferred LE Server. This
|
|
variable is set during the Configuration phase by
|
|
copying the contents of the Preferred LES TLV
|
|
received in the LE_CONFIGURE_RESPONSE."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation V2.0 LUNI specification,
|
|
Section 5.1.1"
|
|
::= { lecStatusEntry 22 }
|
|
|
|
lecStoresServiceCategories OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether or not the client saves Service
|
|
Category TLV data from LE_ARP_RESPONSEs and makes
|
|
it available through leArpTable and leRDArpTable."
|
|
REFERENCE
|
|
"LAN Emulation Over ATM Version 2 - LUNI Specification,
|
|
Annex A (LAN Emulation Control Frame TLVs)"
|
|
::= { lecStatusEntry 23 }
|
|
|
|
|
|
------------------------
|
|
-- ifIndex Mapping Table
|
|
lecMappingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LecMappingEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table mapping the 'ifIndex' values of 'aflane8023'
|
|
and 'aflane8025' interfaces to the 'lecIndex' values
|
|
of the corresponding LAN Emulation Clients."
|
|
::= { leClientMIBObjects 3 }
|
|
|
|
lecMappingEntry OBJECT-TYPE
|
|
SYNTAX LecMappingEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each row describes one ifIndex --> lecIndex mapping."
|
|
INDEX { ifIndex }
|
|
::= { lecMappingTable 1 }
|
|
|
|
LecMappingEntry ::=
|
|
SEQUENCE {
|
|
lecMappingIndex INTEGER
|
|
}
|
|
|
|
lecMappingIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The 'lecIndex' of the client which implements the
|
|
specified interface."
|
|
::= { lecMappingEntry 1 }
|
|
|
|
-------------------
|
|
-- Statistics Table
|
|
lecStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LecStatisticsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An extension table containing traffic statistics for
|
|
all the LAN Emulation Clients this host implements."
|
|
::= { leClientMIBObjects 4 }
|
|
|
|
lecStatisticsEntry OBJECT-TYPE
|
|
SYNTAX LecStatisticsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each row in this table contains traffic statistics
|
|
for one LAN Emulation client."
|
|
INDEX { lecIndex }
|
|
::= { lecStatisticsTable 1 }
|
|
|
|
LecStatisticsEntry ::=
|
|
SEQUENCE {
|
|
lecArpRequestsOut
|
|
Counter,
|
|
lecArpRequestsIn
|
|
Counter,
|
|
lecArpRepliesOut
|
|
Counter,
|
|
lecArpRepliesIn
|
|
Counter,
|
|
lecControlFramesOut
|
|
Counter,
|
|
lecControlFramesIn
|
|
Counter,
|
|
lecSvcFailures
|
|
Counter,
|
|
|
|
-- LEC MIB Version 2.0 additions
|
|
--
|
|
lecFlowFailures Counter,
|
|
lecEchoDiscards Counter,
|
|
lecFilteredMulticasts Counter
|
|
}
|
|
|
|
lecArpRequestsOut OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of LE_ARP_REQUESTs sent over the LUNI by
|
|
this LAN Emulation Client."
|
|
::= { lecStatisticsEntry 1 }
|
|
|
|
lecArpRequestsIn OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of LE_ARP_REQUESTs received over the LUNI
|
|
by this LAN Emulation Client.
|
|
Requests may arrive on the Control Direct VCC or on
|
|
the Control Distribute VCC, depending upon how the
|
|
LES is implemented and the chances it has had for
|
|
learning. This counter covers both VCCs."
|
|
::= { lecStatisticsEntry 2 }
|
|
|
|
lecArpRepliesOut OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of LE_ARP_RESPONSEs sent over the LUNI by
|
|
this LAN Emulation Client."
|
|
::= { lecStatisticsEntry 3 }
|
|
|
|
lecArpRepliesIn OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of LE_ARP_RESPONSEs received over the LUNI
|
|
by this LAN Emulation Client. This count includes
|
|
all such replies, whether solicited or not.
|
|
Replies may arrive on the Control Direct VCC or on
|
|
the Control Distribute VCC, depending upon how the
|
|
LES is implemented. This counter covers both VCCs."
|
|
::= { lecStatisticsEntry 4 }
|
|
|
|
lecControlFramesOut OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of control packets sent by this
|
|
LAN Emulation Client over the LUNI."
|
|
::= { lecStatisticsEntry 5 }
|
|
|
|
lecControlFramesIn OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of control packets received by this
|
|
LAN Emulation Client over the LUNI."
|
|
::= { lecStatisticsEntry 6 }
|
|
|
|
lecSvcFailures OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of
|
|
* outgoing LAN Emulation SVCs which this client
|
|
tried, but failed, to open;
|
|
* incoming LAN Emulation SVCs which this client
|
|
tried, but failed to establish; and
|
|
* incoming LAN Emulation SVCs which this client
|
|
rejected for protocol or security reasons. "
|
|
::= { lecStatisticsEntry 7 }
|
|
|
|
-- MikeWong
|
|
-- LANE 2.0
|
|
lecFlowFailures OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of
|
|
|
|
* outgoing LLC-multiplexed LAN Emulation flows
|
|
which this client tried, but failed, to open;
|
|
|
|
* incoming LLC-multiplexed LAN Emulation flows
|
|
which this client did not accept / establish.
|
|
|
|
Only failures of which the LEC is aware and which are
|
|
clearly LANE-related need to be counted."
|
|
::= { lecStatisticsEntry 8 }
|
|
|
|
lecEchoDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of incoming data frames which were thrown
|
|
away because they were echo frames (e. g., copies of
|
|
this client's own outgoing traffic).
|
|
|
|
Such discards are a normal part of LAN Emulation and
|
|
not a cause for alarm. So this counter is mainly of
|
|
interest for helping to estimate average frame size.
|
|
|
|
Frames that are included in this count should not be
|
|
included in ifInDiscards, so as to avoid setting off
|
|
false alarms."
|
|
::= { lecStatisticsEntry 9 }
|
|
|
|
lecFilteredMulticasts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of incoming data frames which were thrown
|
|
away by the client because they were for a multicast
|
|
(or group) address upper-layer software didn't want.
|
|
|
|
If this counter indicates that a LEC is being loaded
|
|
down with an excessive number of unwanted multicasts,
|
|
one possible solution is to install LECs and LES/BUS
|
|
pairs with better support for selective multicasting.
|
|
|
|
Frames that are included in this count should not be
|
|
included in ifInDiscards, so as to avoid setting off
|
|
false alarms."
|
|
::= { lecStatisticsEntry 10 }
|
|
|
|
-------------------
|
|
-- Server VCC Table
|
|
lecServerVccTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LecServerVccEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table identifying the Control and Multicast VCCs
|
|
for each LAN Emulation Client this host implements."
|
|
::= { leClientMIBObjects 5 }
|
|
|
|
lecServerVccEntry OBJECT-TYPE
|
|
SYNTAX LecServerVccEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each row in this table describes the Control VCCs
|
|
and Multicast VCCs for one LAN Emulation client."
|
|
INDEX { lecIndex }
|
|
::= { lecServerVccTable 1 }
|
|
|
|
LecServerVccEntry ::=
|
|
SEQUENCE {
|
|
lecConfigDirectInterface
|
|
LeConnectionInterface,
|
|
lecConfigDirectVpi
|
|
VpiInteger,
|
|
lecConfigDirectVci
|
|
VciInteger,
|
|
lecControlDirectInterface
|
|
LeConnectionInterface,
|
|
lecControlDirectVpi
|
|
VpiInteger,
|
|
lecControlDirectVci
|
|
VciInteger,
|
|
lecControlDistributeInterface
|
|
LeConnectionInterface,
|
|
lecControlDistributeVpi
|
|
VpiInteger,
|
|
lecControlDistributeVci
|
|
VciInteger,
|
|
lecMulticastSendInterface
|
|
LeConnectionInterface,
|
|
lecMulticastSendVpi
|
|
VpiInteger,
|
|
lecMulticastSendVci
|
|
VciInteger,
|
|
lecMulticastForwardInterface
|
|
LeConnectionInterface,
|
|
lecMulticastForwardVpi
|
|
VpiInteger,
|
|
lecMulticastForwardVci
|
|
VciInteger
|
|
}
|
|
|
|
lecConfigDirectInterface OBJECT-TYPE
|
|
SYNTAX LeConnectionInterface
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface associated with the Configuration
|
|
Direct VCC. If no Configuration Direct VCC exists,
|
|
this object has the value 0. Otherwise, the objects
|
|
( lecConfigDirectInterface,
|
|
lecConfigDirectVpi, lecConfigDirectVci )
|
|
identify the circuit."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.1.1"
|
|
::= { lecServerVccEntry 1 }
|
|
|
|
lecConfigDirectVpi OBJECT-TYPE
|
|
SYNTAX VpiInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If the Configuration Direct VCC exists, this object
|
|
contains the VPI which identifies that VCC at
|
|
the point where it connects to this LE client.
|
|
Otherwise, this object has the value 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.1.1"
|
|
::= { lecServerVccEntry 2 }
|
|
|
|
lecConfigDirectVci OBJECT-TYPE
|
|
SYNTAX VciInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If the Configuration Direct VCC exists, this object
|
|
contains the VCI which identifies that VCC at
|
|
the point where it connects to this LE client.
|
|
Otherwise, this object has the value 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.1.1"
|
|
::= { lecServerVccEntry 3 }
|
|
|
|
lecControlDirectInterface OBJECT-TYPE
|
|
SYNTAX LeConnectionInterface
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface associated with the Control Direct VCC.
|
|
If no Control Direct VCC exists, this object has the
|
|
value 0. Otherwise, the objects
|
|
( lecControlDirectInterface,
|
|
lecControlDirectVpi, lecControlDirectVci )
|
|
identify the circuit."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.1.2"
|
|
::= { lecServerVccEntry 4 }
|
|
|
|
lecControlDirectVpi OBJECT-TYPE
|
|
SYNTAX VpiInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If the Control Direct VCC exists, this object
|
|
contains the VPI which identifies that VCC at
|
|
the point where it connects to this LE client.
|
|
Otherwise, this object has the value 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.1.2"
|
|
::= { lecServerVccEntry 5 }
|
|
|
|
lecControlDirectVci OBJECT-TYPE
|
|
SYNTAX VciInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If the Control Direct VCC exists, this object
|
|
contains the VCI which identifies that VCC at
|
|
the point where it connects to this LE client.
|
|
Otherwise, this object has the value 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.1.2"
|
|
::= { lecServerVccEntry 6 }
|
|
|
|
lecControlDistributeInterface OBJECT-TYPE
|
|
SYNTAX LeConnectionInterface
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface associated with the Control Distribute
|
|
VCC. If no Control Distribute VCC has been set up to
|
|
this client, this object has the value 0. Otherwise,
|
|
the objects
|
|
( lecControlDistributeInterface,
|
|
lecControlDistributeVpi,
|
|
lecControlDistributeVci )
|
|
identify the circuit."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.1.3"
|
|
::= { lecServerVccEntry 7 }
|
|
|
|
lecControlDistributeVpi OBJECT-TYPE
|
|
SYNTAX VpiInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If the Control Distribute VCC exists, this object
|
|
contains the VPI which identifies that VCC at the
|
|
point where it connects to this LE client.
|
|
Otherwise, this object has the value 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.1.3"
|
|
::= { lecServerVccEntry 8 }
|
|
|
|
lecControlDistributeVci OBJECT-TYPE
|
|
SYNTAX VciInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If the Control Distribute VCC exists, this object
|
|
contains the VCI which identifies that VCC at the
|
|
point where it connects to this LE client.
|
|
Otherwise, this object contains the value 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.1.3"
|
|
::= { lecServerVccEntry 9 }
|
|
|
|
lecMulticastSendInterface OBJECT-TYPE
|
|
SYNTAX LeConnectionInterface
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface associated with the Multicast Send
|
|
VCC. If no Multicast Send VCC exists, this object
|
|
has the value 0. Otherwise, the objects
|
|
( lecMulticastSendInterface,
|
|
lecMulticastSendVpi, lecMulticastSendVci )
|
|
identify the circuit."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.2.2"
|
|
::= { lecServerVccEntry 10 }
|
|
|
|
lecMulticastSendVpi OBJECT-TYPE
|
|
SYNTAX VpiInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If the Multicast Send VCC exists, this object
|
|
contains the VPI which identifies that VCC at
|
|
the point where it connects to this LE client.
|
|
Otherwise, this object has the value 0."
|
|
REFERENCE
|
|
"ATM forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.2.2"
|
|
::= { lecServerVccEntry 11 }
|
|
|
|
lecMulticastSendVci OBJECT-TYPE
|
|
SYNTAX VciInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If the Multicast Send VCC exists, this object
|
|
contains the VCI which identifies that VCC at
|
|
the point where it connects to this LE client.
|
|
Otherwise, this object has the value 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.2.2"
|
|
::= { lecServerVccEntry 12 }
|
|
|
|
lecMulticastForwardInterface OBJECT-TYPE
|
|
SYNTAX LeConnectionInterface
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For a LANE V1.0 client:
|
|
-----------------------
|
|
The interface associated with the Multicast Forward
|
|
VCC. If no Multicast Forward VCC has been set up to
|
|
this client, this object has the value 0. Otherwise,
|
|
the objects
|
|
|
|
( lecMulticastForwardInterface,
|
|
lecMulticastForwardVpi,
|
|
lecMulticastForwardVci )
|
|
|
|
identify the circuit.
|
|
|
|
|
|
For a LANE V2.0 client in LANE 2.0 mode:
|
|
----------------------------------------
|
|
The value 0. There may not be a single VCC that can
|
|
be identified as the 'default'."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.2.3"
|
|
::= { lecServerVccEntry 13 }
|
|
|
|
lecMulticastForwardVpi OBJECT-TYPE
|
|
SYNTAX VpiInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For a LANE V1.0 client:
|
|
-----------------------
|
|
If the Multicast Forward VCC exists, this object
|
|
contains the VPI which identifies that VCC at the
|
|
point where it connects to this LE client.
|
|
|
|
Otherwise, this object has the value 0.
|
|
|
|
|
|
For a LANE V2.0 client in LANE 2.0 mode:
|
|
----------------------------------------
|
|
The value 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.2.3"
|
|
::= { lecServerVccEntry 14 }
|
|
|
|
lecMulticastForwardVci OBJECT-TYPE
|
|
SYNTAX VciInteger
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For a LANE V1.0 client:
|
|
-----------------------
|
|
If the Multicast Forward VCC exists, this object
|
|
contains the VCI which identifies that VCC at the
|
|
point where it connects to this LE client.
|
|
|
|
Otherwise, this object has the value 0.
|
|
|
|
|
|
For a LANE V2.0 client in LANE 2.0 mode:
|
|
----------------------------------------
|
|
The value 0."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 2.2.2.2.3"
|
|
::= { lecServerVccEntry 15 }
|
|
|
|
--------------------
|
|
-- ATM Address Table
|
|
lecAtmAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LecAtmAddressEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table listing all of the ATM addresses belonging
|
|
to this host's LAN Emulation Clients."
|
|
::= { leClientMIBObjects 6 }
|
|
|
|
lecAtmAddressEntry OBJECT-TYPE
|
|
SYNTAX LecAtmAddressEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each row in this table describes one of a client's
|
|
ATM addresses."
|
|
INDEX { lecIndex, lecAtmAddress }
|
|
::= { lecAtmAddressTable 1 }
|
|
|
|
LecAtmAddressEntry ::=
|
|
SEQUENCE {
|
|
lecAtmAddress
|
|
AtmLaneAddress,
|
|
lecAtmAddressStatus
|
|
INTEGER,
|
|
|
|
-- New for LANE 2.0
|
|
--
|
|
lecAtmAddressMuxed INTEGER
|
|
}
|
|
|
|
lecAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ATM address this row describes. This could be
|
|
either a primary address or a secondary address."
|
|
::= { lecAtmAddressEntry 1 }
|
|
|
|
lecAtmAddressStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to create and delete rows in this table.
|
|
A management station may not change the status of a
|
|
primary ATM address to 'notInService' or 'destroy'
|
|
unless the client's ifAdminStatus is 'down', and the
|
|
client's lecInterfaceState is 'initialState'.
|
|
Secondary ATM addresses may be destroyed at any time
|
|
permitted by the agent."
|
|
::= { lecAtmAddressEntry 2 }
|
|
|
|
-- LANE 2.0
|
|
|
|
lecAtmAddressMuxed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
muxed(1),
|
|
notMuxed(2),
|
|
both(3),
|
|
none(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates what type(s) of connections the LEC is
|
|
willing to establish at this ATM address."
|
|
::= { lecAtmAddressEntry 3 }
|
|
|
|
|
|
-- ----------------------------- --
|
|
-- Registered MAC Addresses group
|
|
lecMacAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LecMacAddressEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains entries for all of the registered
|
|
MAC addresses belonging to this agent's LE clients.
|
|
C6 Local Unicast MAC Address(es). Each LE Client has
|
|
zero or more local unicast MAC addresses. In an
|
|
operational LE Client, every address in this
|
|
variable MUST have been registered with the LE
|
|
Server. Two LE CLients joined to the same
|
|
emulated LAN MUST NOT have the same local unicast
|
|
MAC address. A LE Client's MAC addresses may
|
|
change during normal operations. When answering
|
|
a LE_ARP_REQUEST for any address in this list, the
|
|
'Remote Address' bit in the FLAGS field of the
|
|
LE_ARP_RESPONSE MUST be clear."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { leClientMIBObjects 7 }
|
|
|
|
lecMacAddressEntry OBJECT-TYPE
|
|
SYNTAX LecMacAddressEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each table row describes a (MAC address, ATM address)
|
|
pair registered for a particular client."
|
|
INDEX { lecIndex, lecMacAddress }
|
|
::= { lecMacAddressTable 1 }
|
|
|
|
LecMacAddressEntry ::=
|
|
SEQUENCE {
|
|
lecMacAddress
|
|
MacAddress,
|
|
lecMacAddressAtmBinding
|
|
AtmLaneAddress,
|
|
|
|
-- New for LANE 2.0
|
|
lecMacAddressMuxedAtmBinding AtmLaneAddress,
|
|
lecMacAddressServiceCategory INTEGER
|
|
|
|
}
|
|
|
|
lecMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unicast MAC address which the LE client denoted by
|
|
'lecIndex' has registered with its LE Server."
|
|
::= { lecMacAddressEntry 1 }
|
|
|
|
lecMacAddressAtmBinding OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ATM address registered for 'lecMacAddress'."
|
|
::= { lecMacAddressEntry 2 }
|
|
|
|
-- LANE 2.0
|
|
lecMacAddressMuxedAtmBinding OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LLC-multiplexed ATM address, if any, registered
|
|
for 'lecMacAddress'."
|
|
::= { lecMacAddressEntry 3 }
|
|
|
|
lecMacAddressServiceCategory OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..2147483647 )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A bitmap describing the service categories which the
|
|
LEC supports for this MAC address.
|
|
|
|
The bitmap is larger than the LANE 2.0 specification
|
|
requires, in case room is ever needed for expansion."
|
|
REFERENCE
|
|
"LAN Emulation Over ATM Version 2 - LUNI Specification,
|
|
Annex A (LAN Emulation Control Frame TLVs)"
|
|
::= { lecMacAddressEntry 4 }
|
|
|
|
----------------------------------
|
|
-- Register Route Descriptor group
|
|
lecRouteDescrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LecRouteDescrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table lists all of the Route Descriptors which
|
|
are registered by this host's LAN Emulation Clients.
|
|
C8 Route Descriptor(s). Route Descriptors exist only
|
|
for source-routed IEEE 802.5 LE Clients that are
|
|
Source-Route Bridges. All Route Descriptors in
|
|
any given emulated LAN MUST be unique. A LE
|
|
Client MAY have zero or more Route Descriptors
|
|
and these Route Descriptors MAY change during
|
|
normal operation. In an operational LE Client,
|
|
every Local Route Descriptor in C8 MUST have been
|
|
registered with the LE Server. When answering a
|
|
LE_ARP_REQUEST for any address in this list, the
|
|
'Remote Address' bit in the FLAGS field of the
|
|
LE_ARP_RESPONSE MUST be clear."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification, V1.0,
|
|
Section 5.1.1"
|
|
::= { leClientMIBObjects 8 }
|
|
|
|
lecRouteDescrEntry OBJECT-TYPE
|
|
SYNTAX LecRouteDescrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each table row describes a (Route Descriptor, ATM
|
|
address) pair registered for a particular client."
|
|
INDEX {
|
|
lecIndex,
|
|
lecRouteDescrSegmentID,
|
|
lecRouteDescrBridgeNumber
|
|
}
|
|
::= { lecRouteDescrTable 1 }
|
|
|
|
LecRouteDescrEntry ::=
|
|
SEQUENCE {
|
|
lecRouteDescrSegmentID
|
|
INTEGER,
|
|
lecRouteDescrBridgeNumber
|
|
INTEGER,
|
|
lecRouteDescrAtmBinding
|
|
AtmLaneAddress,
|
|
|
|
-- New for LANE 2.0
|
|
lecRouteDescrMuxedAtmBinding AtmLaneAddress,
|
|
lecRouteDescrServiceCategory INTEGER
|
|
}
|
|
|
|
lecRouteDescrSegmentID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LAN ID portion of the IEEE 802.5 route descriptor
|
|
associated with this conceptual row."
|
|
::= { lecRouteDescrEntry 1 }
|
|
|
|
lecRouteDescrBridgeNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Bridge Number portion of the IEEE 802.5 route
|
|
descriptor associated with this conceptual row."
|
|
::= { lecRouteDescrEntry 2 }
|
|
|
|
lecRouteDescrAtmBinding OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ATM address registered for the IEEE 802.5 route
|
|
descriptor ('lecRouteDescrSegmentID',
|
|
'lecRouteDescrBridgeNumber')."
|
|
::= { lecRouteDescrEntry 3 }
|
|
|
|
-- LANE 2.0
|
|
lecRouteDescrMuxedAtmBinding OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LLC-multiplexed ATM address, if any, registered
|
|
for the IEEE 802.5 route descriptor
|
|
('lecRouteDescrSegmentID',
|
|
'lecRouteDescrBridgeNumber')."
|
|
::= { lecRouteDescrEntry 4 }
|
|
|
|
lecRouteDescrServiceCategory OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..2147483647 )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A bitmap describing the service categories which the
|
|
LEC supports for this route descriptor.
|
|
|
|
The bitmap is larger than the LANE 2.0 specification
|
|
requires, in case room is ever needed for expansion."
|
|
REFERENCE
|
|
"LAN Emulation Over ATM Version 2 - LUNI Specification,
|
|
Annex A (LAN Emulation Control Frame TLVs)"
|
|
::= { lecRouteDescrEntry 5 }
|
|
|
|
|
|
--------------------------
|
|
-- ARP Table MAC Addresses
|
|
leArpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LeArpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides access to an ATM LAN Emulation
|
|
Client's MAC-to-ATM ARP cache. It contains entries
|
|
for unicast addresses and for the broadcast address,
|
|
but not for multicast MAC addresses.
|
|
C16 LE_ARP Cache. A table of entries, each of which
|
|
establishes a relationship between a LAN
|
|
Destination external to the LE Client and the
|
|
ATM address to which data frames for that LAN
|
|
Destination will be sent."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification,
|
|
Section 5.1.1"
|
|
::= { leClientMIBObjects 9 }
|
|
|
|
leArpEntry OBJECT-TYPE
|
|
SYNTAX LeArpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An ATM LAN Emulation ARP cache entry containing
|
|
information about the binding of one MAC address
|
|
to one ATM address."
|
|
INDEX { lecIndex, leArpMacAddress }
|
|
::= { leArpTable 1 }
|
|
|
|
LeArpEntry ::=
|
|
SEQUENCE {
|
|
leArpMacAddress
|
|
MacAddress,
|
|
leArpAtmAddress
|
|
AtmLaneAddress,
|
|
leArpIsRemoteAddress
|
|
TruthValue,
|
|
leArpEntryType
|
|
LeArpTableEntryType,
|
|
leArpRowStatus
|
|
RowStatus,
|
|
|
|
-- New for LANE 2.0
|
|
leArpMuxedAtmAddress AtmLaneAddress,
|
|
leArpServiceCategory INTEGER
|
|
}
|
|
|
|
leArpMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC address for which this cache entry provides
|
|
a translation. Since ATM LAN Emulation uses an ARP
|
|
protocol to locate the Broadcast and Unknown Server,
|
|
the value of this object could be the broadcast MAC
|
|
address.
|
|
MAC addresses should be unique within any given ATM
|
|
Emulated LAN. However, there's no requirement that
|
|
they be unique across disjoint emulated LANs."
|
|
::= { leArpEntry 1 }
|
|
|
|
leArpAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ATM address of the Broadcast & Unknown Server
|
|
or LAN Emulation Client whose MAC address is stored
|
|
in 'leArpMacAddress'.
|
|
This value may be determined through the use of the
|
|
LE_ARP procedure, through source address learning,
|
|
or through other mechanisms.
|
|
Some agents may provide write access to this object,
|
|
as part of their support for 'static' LE_ARP entries.
|
|
The effect of attempting to write an ATM address to
|
|
a 'learned' row is explicitly undefined. Agents may
|
|
disallow the write, accept the write and change the
|
|
row's type, or even accept the write as-is."
|
|
::= { leArpEntry 2 }
|
|
|
|
leArpIsRemoteAddress OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether this entry is for a local or remote
|
|
MAC address.
|
|
In this context, 'local' means 'a MAC address that is
|
|
local to the remote client', as opposed to 'one of my
|
|
addresses'.
|
|
true(1)
|
|
The address is believed to be remote - or its
|
|
local/remote status is unknown.
|
|
For an entry created via the LE_ARP mechanism,
|
|
this corresponds to the 'Remote address' flag
|
|
being set in the LE_ARP_RESPONSE.
|
|
During Topology Change periods, remote LE_ARP
|
|
entries generally age out faster than others.
|
|
Specifically, they are subject to the Forward
|
|
Delay Time as well as to the Aging Time.
|
|
false(2)
|
|
The address is believed to be local - that is
|
|
to say, registered with the LES by the client
|
|
whose ATM address is leArpAtmAddress.
|
|
For an entry created via the LE_ARP mechanism,
|
|
this corresponds to the 'Remote address' flag
|
|
being cleared in the LE_ARP_RESPONSE."
|
|
::= { leArpEntry 3 }
|
|
|
|
leArpEntryType OBJECT-TYPE
|
|
SYNTAX LeArpTableEntryType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates how this LE_ARP table entry was created and
|
|
whether it is aged."
|
|
DEFVAL { staticVolatile }
|
|
::= { leArpEntry 4 }
|
|
|
|
leArpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lets users create and delete LE_ARP cache entries,
|
|
on systems that support this capability.
|
|
Normally clients will maintain their LE_ARP caches
|
|
automatically. However, managers may occasionally
|
|
want to create 'static' LE_ARP cache entries.
|
|
Rules
|
|
1. Before a new row can become 'active', values
|
|
must be supplied for the columnar objects
|
|
leArpAtmAddress and leArpEntryType.
|
|
2. It is not necessary to set leArpRowStatus to
|
|
'notInService' in order to modify a writable
|
|
object in the same conceptual row.
|
|
3. LE_ARP entries whose status is 'notReady' or
|
|
'notInService' will not be used to translate
|
|
LAN Destinations to ATM Addresses. However,
|
|
clients may overwrite such entries with data
|
|
obtained from other sources. For example, a
|
|
client which needed to transmit a data frame
|
|
to a given MAC address (or via a given Route
|
|
Descriptor) might find that its LE_ARP entry
|
|
for the LAN Destination is 'notInService' or
|
|
'notReady'. The client might then act as if
|
|
the LAN Destination was unknown - generating
|
|
a LE_ARP_REQUEST, flooding the data frame to
|
|
the BUS, and creating a new, 'active' LE_ARP
|
|
cache entry based on the LE_ARP_RESPONSE."
|
|
::= { leArpEntry 5 }
|
|
|
|
-- LANE 2.0
|
|
leArpMuxedAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LLC-multiplexed LE Client or Broadcast/Multicast
|
|
Service ATM address corresponding to the MAC address
|
|
'leArpMacAddress'.
|
|
|
|
This value may be determined through the use of the
|
|
LE_ARP procedure, through source address learning,
|
|
or through other mechanisms.
|
|
|
|
Some agents may provide write access to this object,
|
|
as part of their support for 'static' LE_ARP entries.
|
|
The effect of attempting to write an ATM address to
|
|
a 'learned' row is explicitly undefined. Agents may
|
|
disallow the write, accept the write and change the
|
|
row's type, or even accept the write as-is."
|
|
::= { leArpEntry 6 }
|
|
|
|
leArpServiceCategory OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..2147483647 )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A bitmap describing the service categories which the
|
|
LEC 'lecIndex' supports.
|
|
|
|
This value normally comes from the optional 'Service-
|
|
Category' TLV in LANE 2.0 LE_ARP_RESPONSEs.
|
|
|
|
The bitmap is larger than the LANE 2.0 specification
|
|
requires, in case room is ever needed for expansion.
|
|
|
|
If service categories aren't applicable, aren't known,
|
|
or the implementor does not want to provide memory to
|
|
store them (e.g., because they would only be used for
|
|
SNMP), this object should be set to the value 0.
|
|
|
|
See also the object 'lecStoresServiceCategories'."
|
|
REFERENCE
|
|
"LAN Emulation Over ATM Version 2 - LUNI Specification,
|
|
Annex A (LAN Emulation Control Frame TLVs)"
|
|
::= { leArpEntry 7 }
|
|
|
|
------------------------------
|
|
-- ARP Table Route Descriptors
|
|
leRDArpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LeRDArpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides access to an ATM LAN Emulation
|
|
Client's Route Descriptor-to-ATM ARP cache.
|
|
Implementation of this table is optional for hosts
|
|
that do not support emulated IEEE 802.5 Token Ring
|
|
LANs, and mandatory for hosts which do.
|
|
C16 LE_ARP Cache. A table of entries, each of which
|
|
establishes a relationship between a LAN
|
|
Destination external to the LE Client and the
|
|
ATM address to which data frames for that LAN
|
|
Destination will be sent."
|
|
REFERENCE
|
|
"ATM Forum LAN Emulation Over ATM Specification,
|
|
Section 5.1.1"
|
|
::= { leClientMIBObjects 10 }
|
|
|
|
leRDArpEntry OBJECT-TYPE
|
|
SYNTAX LeRDArpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An ATM LAN Emulation ARP cache entry containing
|
|
information about the binding of one IEEE 802.5
|
|
route descriptor to one ATM address."
|
|
INDEX {
|
|
lecIndex,
|
|
leRDArpSegmentID,
|
|
leRDArpBridgeNumber
|
|
}
|
|
::= { leRDArpTable 1 }
|
|
|
|
LeRDArpEntry ::=
|
|
SEQUENCE {
|
|
leRDArpSegmentID
|
|
INTEGER,
|
|
leRDArpBridgeNumber
|
|
INTEGER,
|
|
leRDArpAtmAddress
|
|
AtmLaneAddress,
|
|
leRDArpEntryType
|
|
LeArpTableEntryType,
|
|
leRDArpRowStatus
|
|
RowStatus,
|
|
|
|
-- New for LANE 2.0
|
|
leRDArpMuxedAtmAddress AtmLaneAddress,
|
|
leRDArpServiceCategory INTEGER,
|
|
leRDArpIsRemoteDescriptor TruthValue
|
|
}
|
|
|
|
leRDArpSegmentID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LAN ID portion of the IEEE 802.5 route descriptor
|
|
associated with this ARP cache entry."
|
|
::= { leRDArpEntry 1 }
|
|
|
|
leRDArpBridgeNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Bridge Number portion of the IEEE 802.5 route
|
|
descriptor associated with this ARP cache entry."
|
|
::= { leRDArpEntry 2 }
|
|
|
|
leRDArpAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ATM address of the LAN Emulation Client which is
|
|
associated with the route descriptor
|
|
('leRDArpSegmentID', 'leRDArpBridgeNumber').
|
|
This value may be determined through the use of the
|
|
LE_ARP procedure, through source address learning,
|
|
or through other mechanisms.
|
|
Some agents may provide write access to this object,
|
|
as part of their support for 'static' LE_ARP entries.
|
|
The effect of attempting to write an ATM address to
|
|
a 'learned' row is explicitly undefined. Agents may
|
|
disallow the write, accept the write and change the
|
|
row's type, or even accept the write as-is."
|
|
::= { leRDArpEntry 3 }
|
|
|
|
leRDArpEntryType OBJECT-TYPE
|
|
SYNTAX LeArpTableEntryType
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates how this LE_ARP table entry was created and
|
|
whether it is aged."
|
|
DEFVAL { staticVolatile }
|
|
::= { leRDArpEntry 4 }
|
|
|
|
leRDArpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Lets users create and delete LE_ARP cache entries,
|
|
on systems that support this capability.
|
|
Normally clients will maintain their LE_ARP caches
|
|
automatically. However, managers may occasionally
|
|
want to create 'static' LE_ARP cache entries.
|
|
Rules
|
|
|
|
1. Before a new row can become 'active', values
|
|
must be supplied for the columnar objects
|
|
leRDArpAtmAddress and leRDArpEntryType.
|
|
2. It is not necessary to set leRDArpRowStatus to
|
|
'notInService' in order to modify a writable
|
|
object in the same conceptual row.
|
|
3. LE_ARP entries whose status is 'notReady' or
|
|
'notInService' will not be used to translate
|
|
LAN Destinations to ATM Addresses. However,
|
|
clients may overwrite such entries with data
|
|
obtained from other sources. For example, a
|
|
client which needed to transmit a data frame
|
|
to a given MAC address (or via a given Route
|
|
Descriptor) might find that its LE_ARP entry
|
|
for the LAN Destination is 'notInService' or
|
|
'notReady'. The client might then act as if
|
|
the LAN Destination was unknown - generating
|
|
a LE_ARP_REQUEST, flooding the data frame to
|
|
the BUS, and creating a new, 'active' LE_ARP
|
|
cache entry based on the LE_ARP_RESPONSE."
|
|
::= { leRDArpEntry 5 }
|
|
|
|
-- LANE 2.0
|
|
leRDArpMuxedAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LLC-multiplexed ATM address of the LAN Emulation
|
|
Client which is associated with the route descriptor
|
|
('leRDArpSegmentID', 'leRDArpBridgeNumber').
|
|
|
|
This value may be determined through the use of the
|
|
LE_ARP procedure, through source address learning,
|
|
or through other mechanisms.
|
|
|
|
Some agents may provide write access to this object,
|
|
as part of their support for 'static' LE_ARP entries.
|
|
The effect of attempting to write an ATM address to
|
|
a 'learned' row is explicitly undefined. Agents may
|
|
disallow the write, accept the write and change the
|
|
row's type, or even accept the write as-is."
|
|
::= { leRDArpEntry 6 }
|
|
|
|
leRDArpServiceCategory OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..2147483647 )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A bitmap describing the service categories which the
|
|
LEC 'lecIndex'supports.
|
|
|
|
This value normally comes from the optional 'Service-
|
|
Category' TLV in LANE 2.0 LE_ARP_RESPONSEs.
|
|
|
|
The bitmap is larger than the LANE 2.0 specification
|
|
requires, in case room is ever needed for expansion.
|
|
|
|
If service categories aren't applicable, aren't known,
|
|
or the implementor does not want to provide memory to
|
|
store them (e.g., because they would only be used for
|
|
SNMP), this object should be set to the value 0.
|
|
|
|
See also the object 'lecStoresServiceCategories'."
|
|
REFERENCE
|
|
"LAN Emulation Over ATM Version 2 - LUNI Specification,
|
|
Annex A (LAN Emulation Control Frame TLVs)"
|
|
::= { leRDArpEntry 7 }
|
|
|
|
leRDArpIsRemoteDescriptor OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether this entry is for a local or remote
|
|
route descriptor.
|
|
|
|
In this context, 'local' means 'a route descriptor
|
|
that is local to the remote client', as opposed to
|
|
'one of my route descriptors'.
|
|
|
|
true(1)
|
|
The route descriptor is believed to be remote
|
|
- or its local/remote status is unknown.
|
|
|
|
For an entry created via the LE_ARP mechanism,
|
|
this corresponds to the 'Remote address' flag
|
|
being set in the LE_ARP_RESPONSE.
|
|
|
|
false(2)
|
|
The route descriptor is believed to be local
|
|
- that is to say, registered with the LES by
|
|
the client whose address is leRDArpAtmAddress
|
|
(and/or leRDArpMuxedATMAddress).
|
|
|
|
For an entry created via the LE_ARP mechanism,
|
|
this corresponds to the 'Remote address' flag
|
|
being cleared in the LE_ARP_RESPONSE."
|
|
::= { leRDArpEntry 8 }
|
|
|
|
-- LANE 2.0 from here on
|
|
-- ------------------------------------------------------------- --
|
|
|
|
--
|
|
-- LAN Emulation Client - Multicast Forward VCC table
|
|
--
|
|
|
|
lecMcForwardTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LecMcForwardEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table identifying Multicast Forward VCCs for LAN
|
|
Emulation Version 2.0 clients."
|
|
::= { leClientMIBObjects 11 }
|
|
|
|
lecMcForwardEntry OBJECT-TYPE
|
|
SYNTAX LecMcForwardEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each row represents one Multicast Forward VCC."
|
|
INDEX { lecIndex,
|
|
lecMcForwardInterface,
|
|
lecMcForwardVpi,
|
|
lecMcForwardVci }
|
|
::= { lecMcForwardTable 1 }
|
|
|
|
LecMcForwardEntry ::=
|
|
SEQUENCE {
|
|
lecMcForwardInterface LeConnectionInterface,
|
|
lecMcForwardVpi VpiInteger,
|
|
lecMcForwardVci VciInteger,
|
|
lecMcForwardVerification INTEGER
|
|
}
|
|
|
|
lecMcForwardInterface OBJECT-TYPE
|
|
SYNTAX LeConnectionInterface
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface associated with the Multicast Forward
|
|
VCC."
|
|
::= { lecMcForwardEntry 1 }
|
|
|
|
lecMcForwardVpi OBJECT-TYPE
|
|
SYNTAX VpiInteger
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VPI which identifies the Multicast Forward VCC
|
|
at the point where it connects to the LANE client."
|
|
::= { lecMcForwardEntry 2 }
|
|
|
|
lecMcForwardVci OBJECT-TYPE
|
|
SYNTAX VciInteger
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VCI which identifies the Multicast Forward VCC
|
|
at the point where it connects to the LANE client."
|
|
::= { lecMcForwardEntry 3 }
|
|
|
|
lecMcForwardVerification OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
implicit(2),
|
|
explicit(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the calling address for this VCC
|
|
has been verified.
|
|
|
|
none - No verification
|
|
|
|
implicit - Calling party address was same as
|
|
BUS address
|
|
|
|
explicit - Client used LE_VERIFY protocol
|
|
|
|
Also serves double-duty as a 'row exists' flag."
|
|
::= { lecMcForwardEntry 4 }
|
|
|
|
-- ------------------------------------------------------------- --
|
|
|
|
--
|
|
-- LAN Emulation Client - LE_ARP Response Group
|
|
--
|
|
--
|
|
-- These optional objects let a network manager find out the ATM
|
|
-- addresses associated with a proxy client's "C27 Remote Unicast
|
|
-- MAC Address(es)" and "C30 Remote Route Descriptor(s)".
|
|
--
|
|
-- They can also be used to find out the ATM addresses associated
|
|
-- with a client's "C6 Local Unicast MAC Address(es)" and "C8
|
|
-- Local Route Descriptor(s)".
|
|
--
|
|
--
|
|
-- In the interests of efficiency and of not creating a big table
|
|
-- that's the size of a bridge's forwarding database, the objects
|
|
-- operate on a request-response model:
|
|
--
|
|
-- 1. The network management system does a SET operation
|
|
-- indicating the specific MAC address or segment ID/
|
|
-- bridge number, and the specific client.
|
|
--
|
|
-- 2. If the agent's MIB handler accepts the SET request,
|
|
-- it triggers a query and updates the lecMacQuery* or
|
|
-- lecRdQuery* objects.
|
|
--
|
|
-- 3. The network management system does a GET operation
|
|
-- to read the results. Ideally it should GET all of
|
|
-- the result objects in one operation and check that
|
|
-- the result keys are the same as the query keys, to
|
|
-- handle the case of simultaneous use by another NMS.
|
|
--
|
|
|
|
lecQueryObjects OBJECT IDENTIFIER ::= { leClientMIBObjects 12 }
|
|
|
|
|
|
|
|
|
|
--
|
|
-- MAC address queries
|
|
--
|
|
|
|
lecMacQueryObjects OBJECT IDENTIFIER ::= { lecQueryObjects 1 }
|
|
|
|
lecMacQueryLecIndex OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..2147483647 )
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The 'lecIndex' of the LEC whose MAC address binding
|
|
the network management station wants to look up.
|
|
|
|
When written: Triggers a new query.
|
|
|
|
When read: Identifies the last LEC queried. (This
|
|
value may be 0 if there have been no queries, or if
|
|
a LEC has been deleted.)"
|
|
::= { lecMacQueryObjects 1 }
|
|
|
|
lecMacQueryAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC address whose binding the network management
|
|
station wants to look up.
|
|
|
|
When written: Triggers a new query. (Note that the
|
|
SNMP agent is free to reject multicast and broadcast
|
|
addresses with a 'badValue' error.)
|
|
|
|
When read: Returns the last MAC address queried, or
|
|
all zeroes if lecMacQueryLecIndex is 0."
|
|
::= { lecMacQueryObjects 2 }
|
|
|
|
lecMacQueryStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
unsupported(2),
|
|
local(3),
|
|
remote(4),
|
|
unknown(5)
|
|
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of the last query - one of the following:
|
|
|
|
none(1)
|
|
No queries have been made; therefore, other
|
|
results values are invalid.
|
|
|
|
unsupported(2)
|
|
Queries are not supported for this LEC.
|
|
|
|
local(3)
|
|
The MAC address is one of the client's local
|
|
MAC addresses.
|
|
|
|
remote(4)
|
|
The MAC address is one of the client's remote
|
|
MAC addresses.
|
|
|
|
unknown(5)
|
|
The MAC address does not belong (is not known
|
|
to belong) to the client."
|
|
::= { lecMacQueryObjects 3 }
|
|
|
|
lecMacQueryAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The non-multiplexed ATM address which this client --
|
|
i.e., client 'lecMacQueryLecIndex' -- would use in a
|
|
LE_ARP_RESPONSE for 'lecMacQueryAddress'.
|
|
|
|
This object is only meaningful when lecMacQueryStatus
|
|
is 'localMacAddress' or 'remoteMacAddress'."
|
|
::= { lecMacQueryObjects 4 }
|
|
|
|
lecMacQueryMuxedAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LLC-multiplexed ATM address which this client --
|
|
i.e., client 'lecMacQueryLecIndex' -- would use in a
|
|
LE_ARP_RESPONSE for 'lecMacQueryAddress'.
|
|
|
|
This object is only meaningful when lecMacQueryStatus
|
|
is 'localMacAddress' or 'remoteMacAddress'."
|
|
::= { lecMacQueryObjects 5 }
|
|
|
|
lecMacQueryServiceCategory OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..2147483647 )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Service Category TLV that this client would use
|
|
in a LE_ARP_RESPONSE for 'lecMacQueryAddress'.
|
|
|
|
If this client wouldn't return a Service Category TLV
|
|
in the LE_ARP_RESPONSE, this object should be set to
|
|
zero.
|
|
|
|
The bitmap is larger than the LANE 2.0 specification
|
|
requires, in case room is ever needed for expansion.
|
|
|
|
This object is only meaningful when lecMacQueryStatus
|
|
is 'localMacAddress' or 'remoteMacAddress'."
|
|
REFERENCE
|
|
"LAN Emulation Over ATM Version 2 - LUNI Specification,
|
|
Annex A (LAN Emulation Control Frame TLVs)"
|
|
::= { lecMacQueryObjects 6 }
|
|
|
|
|
|
|
|
|
|
--
|
|
-- Route Descriptor queries
|
|
--
|
|
|
|
lecRDQueryObjects OBJECT IDENTIFIER ::= { lecQueryObjects 2 }
|
|
|
|
lecRDQueryLecIndex OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..2147483647 )
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The 'lecIndex' of the LEC whose route descriptor to
|
|
ATM address binding the network management station
|
|
wants to look up.
|
|
|
|
When written: Triggers a new query.
|
|
|
|
When read: Identifies the last LEC queried. (This
|
|
value may be 0 if there have been no queries, or if
|
|
a LEC has been deleted.)"
|
|
::= { lecRDQueryObjects 1 }
|
|
|
|
lecRDQuerySegmentID OBJECT-TYPE
|
|
SYNTAX INTEGER( 0..4095 )
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LAN ID portion of the IEEE 802.5 route descriptor
|
|
whose binding the network management station wants to
|
|
look up.
|
|
|
|
When written: Triggers a new query.
|
|
|
|
When read: Returns the LAN ID portion of the last RD
|
|
queried, or 0 if lecRDQueryLecIndex is 0."
|
|
::= { lecRDQueryObjects 2 }
|
|
|
|
lecRDQueryBridgeNumber OBJECT-TYPE
|
|
SYNTAX INTEGER( 0..15 )
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The bridge number portion of the IEEE 802.5 route
|
|
descriptor whose binding the network management
|
|
station wants to look up.
|
|
|
|
When written: Triggers a new query.
|
|
|
|
When read: Returns the bridge number portion of the
|
|
last RD queried, or 0 if lecRDQueryLecIndex is 0."
|
|
::= { lecRDQueryObjects 3 }
|
|
|
|
lecRDQueryStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
unsupported(2),
|
|
local(3),
|
|
remote(4),
|
|
unknown(5)
|
|
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of the last query - one of the following:
|
|
|
|
none(1)
|
|
No queries have been made; therefore, other
|
|
results values are invalid.
|
|
|
|
unsupported(2)
|
|
Queries are not supported for this LEC.
|
|
|
|
local(3)
|
|
The route descriptor is one of the client's
|
|
local route descriptors.
|
|
|
|
remote(4)
|
|
The route descriptor is one of the client's
|
|
remote route descriptors.
|
|
|
|
unknown(5)
|
|
The route descriptor does not belong (is not
|
|
known to belong) to the client."
|
|
::= { lecRDQueryObjects 4 }
|
|
|
|
lecRDQueryAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The non-multiplexed ATM address which this client --
|
|
i.e., client 'lecRDQueryLecIndex' -- would use in a
|
|
LE_ARP_RESPONSE for the route descriptor
|
|
('lecRDQuerySegmentID', 'lecRDQueryBridgeNumber').
|
|
|
|
This object is only meaningful when lecRDQueryStatus
|
|
is 'local' or 'remote'."
|
|
::= { lecRDQueryObjects 5 }
|
|
|
|
lecRDQueryMuxedAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmLaneAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The LLC-multiplexed ATM address which this client --
|
|
i.e., client 'lecRDQueryLecIndex' -- would use in a
|
|
LE_ARP_RESPONSE for the route descriptor
|
|
('lecRDQuerySegmentID', 'lecRDQueryBridgeNumber').
|
|
|
|
This object is only meaningful when lecRDQueryStatus
|
|
is 'local' or 'remote'."
|
|
::= { lecRDQueryObjects 6 }
|
|
|
|
lecRDQueryServiceCategory OBJECT-TYPE
|
|
SYNTAX INTEGER ( 0..2147483647 )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Service Category TLV that this client would use
|
|
in a LE_ARP_RESPONSE for the route descriptor
|
|
('lecRDQuerySegmentID', 'lecRDQueryBridgeNumber').
|
|
|
|
If this client wouldn't return a Service Category TLV
|
|
in the LE_ARP_RESPONSE, this object should be set to
|
|
zero.
|
|
|
|
The bitmap is larger than the LANE 2.0 specification
|
|
requires, in case room is ever needed for expansion.
|
|
|
|
This object is only meaningful when lecRDQueryStatus
|
|
is 'local' or 'remote'."
|
|
REFERENCE
|
|
"LAN Emulation Over ATM Version 2 - LUNI Specification,
|
|
Annex A (LAN Emulation Control Frame TLVs)"
|
|
::= { lecRDQueryObjects 7 }
|
|
|
|
|
|
|
|
-- ------------------------------------------------------------- --
|
|
|
|
--
|
|
-- LAN Emulation Client TLVs
|
|
--
|
|
|
|
lecTlvTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LecTlvEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table provides a place for an agent to store
|
|
interesting TLVs associated with
|
|
|
|
o Registered LAN destinations
|
|
|
|
o LE_ARP entries
|
|
|
|
o Query results from the LE_ARP response group
|
|
|
|
o Initialization / configuration
|
|
|
|
and any other categories the ATM Forum adds.
|
|
|
|
Unless otherwise stated,
|
|
|
|
o Entries in this table are completely optional.
|
|
|
|
o An implementation may choose to keep only the
|
|
TLVs which are 'interesting' to its designers,
|
|
such as MPOA TLVs in LE_ARP_RESPONSEs.
|
|
|
|
o TLVs which already have their own MIB objects
|
|
should not be duplicated here.
|
|
|
|
o Where write / create access is allowed, it is
|
|
not mandatory.
|
|
|
|
Implementors should document the specific lecTlvTable
|
|
features of their agent."
|
|
REFERENCE
|
|
"LAN Emulation Over ATM Version 2 - LUNI Specification,
|
|
Annex A (LAN Emulation Control Frame TLVs)"
|
|
::= { leClientMIBObjects 13 }
|
|
|
|
lecTlvEntry OBJECT-TYPE
|
|
SYNTAX LecTlvEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each table row describes one TLV of a related set."
|
|
INDEX { lecIndex, lecTlvSetIndex, lecTlvLanDestination,
|
|
lecTlvIndex }
|
|
::= { lecTlvTable 1 }
|
|
|
|
LecTlvEntry ::=
|
|
SEQUENCE {
|
|
|
|
lecTlvSetIndex INTEGER,
|
|
lecTlvLanDestination OCTET STRING,
|
|
lecTlvIndex INTEGER,
|
|
lecTlvType OCTET STRING,
|
|
lecTlvValue OCTET STRING,
|
|
lecTlvRowStatus RowStatus
|
|
|
|
}
|
|
|
|
lecTlvSetIndex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
layer3Tlvs(1),
|
|
actualRegTlvs(2),
|
|
configRegTlvs(3),
|
|
leArpTlvs(4),
|
|
queryTlvs(5)
|
|
}
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An index which helps to identify a set of TLVs, and to
|
|
indicate their purpose.
|
|
|
|
The value of this index defines the interpretation and
|
|
use of corresponding table rows as follows:
|
|
|
|
layer3Tlvs(1)
|
|
-------------
|
|
This index provides access to Layer-3-Address
|
|
TLVs (Initial State variable C36) used during
|
|
the Initialization phase.
|
|
|
|
TLVs are stored in rows
|
|
|
|
( lecIndex, 1,
|
|
LAN_Destination( all '00's ),
|
|
* )
|
|
|
|
These rows may be read / created / written /
|
|
deleted.
|
|
|
|
|
|
actualRegTlvs(2)
|
|
----------------
|
|
This index provides access to TLVs which were
|
|
used to register LAN Destinations.
|
|
|
|
These TLVs are associated with entries in the
|
|
lecMacAddressTable and lecRouteDescrTable and
|
|
stored in rows
|
|
|
|
( lecIndex, 2,
|
|
LAN_Destination( lecMacAddress ),
|
|
* )
|
|
|
|
( lecIndex, 2,
|
|
LAN_Destination(
|
|
lecRouteDescrSegmentID,
|
|
lecRouteDescrBridgeNumber ),
|
|
* )
|
|
|
|
These rows may be read or deleted, but cannot
|
|
be created or modified. Most implementations
|
|
are expected to make them read-only.
|
|
|
|
Note that TLVs that have their own objects in
|
|
the associated tables SHOULD NOT appear here.
|
|
LLC-Muxed-ATM-Address & Service-Category TLVs
|
|
are two examples.
|
|
|
|
|
|
configRegTlvs(3)
|
|
----------------
|
|
This index provides a way to set registration
|
|
TLVs for unregistered LAN Destinations.
|
|
|
|
Hopefully this is not something that managers
|
|
will need to do a lot.
|
|
|
|
TLVs are stored in rows
|
|
|
|
( lecIndex, 3,
|
|
LAN_Destination( the_LAN_destination ),
|
|
* )
|
|
|
|
Note that the agent might restrict the set of
|
|
LAN Destinations and TLVs that it allows; for
|
|
instance, to screen out the 'V2 Capable' TLV.
|
|
|
|
|
|
leArpTlvs(4)
|
|
------------
|
|
This index provides access to TLVs associated
|
|
with the LE_ARP cache.
|
|
|
|
These TLVs are associated with leArpTable and
|
|
leRDArpTable, and stored in rows
|
|
|
|
( lecIndex, 4,
|
|
LAN_Destination( leArpMacAddress ),
|
|
* )
|
|
|
|
( lecIndex, 4,
|
|
LAN_Destination(
|
|
leRDArpSegmentID,
|
|
leRDArpBridgeNumber ),
|
|
* )
|
|
|
|
Agents may allow write/create access to TLVs
|
|
when the type of the associated LE_ARP entry
|
|
is 'staticVolatile', 'staticNonVolatile', or
|
|
'other'.
|
|
|
|
Note that TLVs that have their own objects in
|
|
the associated tables SHOULD NOT appear here.
|
|
LLC-Muxed-ATM-Address & Service-Category TLVs
|
|
are two examples.
|
|
|
|
|
|
queryTlvs(5)
|
|
------------
|
|
This index provides access to TLVs associated
|
|
with the last MAC Address or Route Descriptor
|
|
query.
|
|
|
|
TLVs are associated with lecMacQueryObjects &
|
|
lecRDQueryObjects, and stored in rows
|
|
|
|
( lecIndex, 5,
|
|
LAN_Destination( lecMacQueryAddress ),
|
|
* )
|
|
|
|
( lecIndex, 5,
|
|
LAN_Destination(
|
|
lecRDQuerySegmentID,
|
|
lecRDQueryBridgeNumber ),
|
|
* )
|
|
|
|
Note that TLVs that have their own objects in
|
|
the associated tables SHOULD NOT appear here.
|
|
LLC-Muxed-ATM-Address & Service-Category TLVs
|
|
are two examples.
|
|
|
|
|
|
Additional indices may be defined by the ATM Forum as
|
|
needed."
|
|
::= { lecTlvEntry 1 }
|
|
|
|
lecTlvLanDestination OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE( 8 ) )
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC address or route descriptor associated with
|
|
the TLV (see the description of the lecTlvSetIndex),
|
|
encoded in the fashion defined in the LANE 2.0 LUNI
|
|
specification (Table 16). To recap:
|
|
|
|
The first two octets indicate the LAN Destination's
|
|
type: 00, 01 for a MAC address; 00, 02 for a route
|
|
descriptor; 00, 00 for 'no LAN Destination'.
|
|
|
|
The next six octets contain either the MAC address,
|
|
or four 00 octets followed by the route descriptor,
|
|
or six nulls.
|
|
|
|
Note:
|
|
-----
|
|
In the future, the ATM Forum may extend this field
|
|
for use with other types of index values, provided
|
|
that each new type of index value has a unique tag.
|
|
Such extensions are NOT to be considered a 'change
|
|
in semantics' that requires the deprecation of the
|
|
index object and the table.
|
|
|
|
Network management system implementors are advised
|
|
to display values whose tags they do not recognize
|
|
as (formatted) hexadecimal strings."
|
|
::= { lecTlvEntry 2 }
|
|
|
|
lecTlvIndex OBJECT-TYPE
|
|
SYNTAX INTEGER ( 1..65535 )
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An arbitrary index which allows a set to contain
|
|
multiple TLVs."
|
|
::= { lecTlvEntry 3 }
|
|
|
|
lecTlvType OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE( 4 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A four-octet string indicating this item's type.
|
|
It consists of a three-octet OUI, followed by an
|
|
octet identifying one of the organization's TLVs."
|
|
::= { lecTlvEntry 4 }
|
|
|
|
lecTlvValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING ( SIZE( 0..255 ) )
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value - and, implicitly, the length - of the
|
|
TLV."
|
|
::= { lecTlvEntry 5 }
|
|
|
|
lecTlvRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Provides a way for network managers to create and
|
|
delete rows in the TLV table."
|
|
::= { lecTlvEntry 6 }
|
|
|
|
---------------
|
|
-- Compliance
|
|
leClientMIBConformance OBJECT IDENTIFIER ::= { leClientMIB 2 }
|
|
leClientMIBGroups OBJECT IDENTIFIER ::= { leClientMIBConformance 1 }
|
|
leClientMIBCompliances OBJECT IDENTIFIER ::= { leClientMIBConformance 2 }
|
|
leClientMIBCompliance OBJECT IDENTIFIER ::= { leClientMIBCompliances 1 }
|
|
leClientConfigGroup OBJECT IDENTIFIER ::= { leClientMIBGroups 1 }
|
|
leClientStatusGroup OBJECT IDENTIFIER ::= { leClientMIBGroups 2 }
|
|
leClientMappingGroup OBJECT IDENTIFIER ::= { leClientMIBGroups 3 }
|
|
leClientStatisticsGroup OBJECT IDENTIFIER ::= { leClientMIBGroups 4 }
|
|
leClientServerVccGroup OBJECT IDENTIFIER ::= { leClientMIBGroups 5 }
|
|
leClientAtmAddressesGroup OBJECT IDENTIFIER ::= { leClientMIBGroups 6 }
|
|
leClientMacAddressesGroup OBJECT IDENTIFIER ::= { leClientMIBGroups 7 }
|
|
leClientRouteDescriptorsGroup OBJECT IDENTIFIER ::= { leClientMIBGroups 8 }
|
|
leClientArpGroup OBJECT IDENTIFIER ::= { leClientMIBGroups 9 }
|
|
leClientRDArpGroup OBJECT IDENTIFIER ::= { leClientMIBGroups 10 }
|
|
|
|
END
|