WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/bintec/BINTEC-USB

718 lines
20 KiB
Plaintext
Raw Blame History

-- This file is corresponding to Release 9.1.10.101 from 2014/08/11 00:00:00
---------------------------------------------------------------------------
-- (C)opyright 2007-2014 bintec elmeg GmbH
-- $RCSfile: mib-usb,v $
-- $Revision: 1.8 $
-- $Date: 2014-02-07 10:37:50 $
-- Author: Peter Kietzmann
---------------------------------------------------------------------------
BINTEC-USB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Unsigned32, Counter32, Counter64, IpAddress, TimeTicks,
mib-2, enterprises
FROM SNMPv2-SMI
DisplayString, TimeStamp
FROM SNMPv2-TC
usb, Date
FROM BINTEC-MIB
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF;
-- This MIB file contains MIBs for USB host controller and device handling
-- group usb:
--
usbMIB MODULE-IDENTITY
LAST-UPDATED "201202280000Z"
ORGANIZATION "bintec elmeg GmbH"
CONTACT-INFO
"EMail: info@bintec-elmeg.com
Web: www.bintec-elmeg.com
"
DESCRIPTION
"The MIB module for USB administration entities.
"
::= { usb 255 }
---------------------------------------------------------------------------
-- USB Descriptor Stuff
---------------------------------------------------------------------------
usbDeviceDescTable OBJECT-TYPE
SYNTAX SEQUENCE OF UsbDeviceDescEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the actually detected USB devices."
::= { usb 1 }
usbDeviceDescEntry OBJECT-TYPE
SYNTAX UsbDeviceDescEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"(one entry of usbDeviceDescTable)"
INDEX { usbDeviceDescDevAddr }
::= { usbDeviceDescTable 1 }
UsbDeviceDescEntry ::=
SEQUENCE {
usbDeviceDescDevAddr INTEGER,
usbDeviceDescUpTime TimeStamp,
usbDeviceDescStatus INTEGER,
usbDeviceDescBcdUSB INTEGER,
usbDeviceDescDeviceClass INTEGER,
usbDeviceDescDeviceSubClass INTEGER,
usbDeviceDescDeviceProtocol INTEGER,
usbDeviceDescMaxPacketSize INTEGER,
usbDeviceDescIdVendor INTEGER,
usbDeviceDescIdProduct INTEGER,
usbDeviceDescBcdDevice INTEGER,
usbDeviceDescTxtManufacturer DisplayString,
usbDeviceDescTxtProduct DisplayString,
usbDeviceDescTxtSerialNumber DisplayString,
usbDeviceDescNumConfigurations INTEGER,
usbDeviceDescRawData OCTET STRING,
usbDeviceDescHubPortNumber INTEGER,
usbDeviceDescDeviceSpeed INTEGER,
usbDeviceDescDepth INTEGER,
usbDeviceDescParent INTEGER
}
usbDeviceDescDevAddr OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DevAddr = (slot << 12) | (unit << 8) | (Enum << 4).
Enum is assigned by the USB device enumerator."
::= { usbDeviceDescEntry 1 }
usbDeviceDescUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TimeStamp when the USB host controller/root hub
detected the inserted USB device."
::= { usbDeviceDescEntry 2 }
usbDeviceDescStatus OBJECT-TYPE
SYNTAX INTEGER {
attach(1),
config(2),
detach(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the USB device:
attach - attach the device to the specified device class
config - configure the device if supported
detach - detach the device from upper layers."
::= { usbDeviceDescEntry 3 }
usbDeviceDescBcdUSB OBJECT-TYPE
SYNTAX INTEGER {
unspecified(1),
usb1-0(2),
usb1-1(3),
usb2-0(4),
usb3-0(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The USB standard supported by the device."
::= { usbDeviceDescEntry 4 }
usbDeviceDescDeviceClass OBJECT-TYPE
SYNTAX INTEGER {
spec-in-ifc(0),
comm(2),
hub(9),
diagnostic(220),
wireless(224),
vendor-spec(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The class code of the USB device.
0x00 - each interface specifies it's own class code.
0xFF - the class code is vendor specific.
Otherwise the value is a valid class code."
::= { usbDeviceDescEntry 5 }
usbDeviceDescDeviceSubClass OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DeviceClass dependent SubClass code.
There are no unique values over all DeviceClasses defined."
::= { usbDeviceDescEntry 6 }
usbDeviceDescDeviceProtocol OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DeviceClass and SubClass dependent DeviceProtocol code.
There are no unique values over all DeviceClasses defined."
::= { usbDeviceDescEntry 7 }
usbDeviceDescMaxPacketSize OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum packet size supported by the USB device.
This value normally depends on the USB standard supported."
::= { usbDeviceDescEntry 8 }
usbDeviceDescIdVendor OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique USB device vendor ID."
::= { usbDeviceDescEntry 9 }
usbDeviceDescIdProduct OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The (hopefully) unique USB device product ID."
::= { usbDeviceDescEntry 10 }
usbDeviceDescBcdDevice OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The USB device release number in BCD format."
::= { usbDeviceDescEntry 11 }
usbDeviceDescTxtManufacturer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Human readable manufacturers name (if present)."
::= { usbDeviceDescEntry 12 }
usbDeviceDescTxtProduct OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Human readable product name (if present)."
::= { usbDeviceDescEntry 13 }
usbDeviceDescTxtSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Human readable serial number (if present)."
::= { usbDeviceDescEntry 14 }
usbDeviceDescNumConfigurations OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of alternative device configurations
supported by the USB device."
::= { usbDeviceDescEntry 15 }
usbDeviceDescRawData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..18))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device descriptor raw data for debugging purposes only."
::= { usbDeviceDescEntry 16 }
usbDeviceDescHubPortNumber OBJECT-TYPE
SYNTAX INTEGER(0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the port the USB device is connected to."
::= { usbDeviceDescEntry 17 }
usbDeviceDescDeviceSpeed OBJECT-TYPE
SYNTAX INTEGER {
low(1), -- 1.5 MBit/s
full(2), -- 12.5 MBit/s
high(3) -- 480.0 MBit/s
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The speed the USB device uses for data transmission."
::= { usbDeviceDescEntry 18 }
usbDeviceDescDepth OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The depth in the bus topology where the device is located.
0 = Root Hub, 1 = Device at Root Hub, 2 = Device at ext. Hub,
3 = Device at external Hub connected to an external Hub, etc."
::= { usbDeviceDescEntry 19 }
usbDeviceDescParent OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DevAddr = (slot << 12) | (unit << 8) | (Enum << 4)
of the parent hub for this device.
Enum is assigned by the USB device enumerator."
::= { usbDeviceDescEntry 20 }
---------------------------------------------------------------------------
usbConfigDescTable OBJECT-TYPE
SYNTAX SEQUENCE OF UsbConfigDescEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration(s)
provided by the detected USB device."
::= { usb 2 }
usbConfigDescEntry OBJECT-TYPE
SYNTAX UsbConfigDescEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"(one entry of usbConfigDescTable)"
INDEX { usbConfigDescDevAddr, usbConfigDescConfigValue }
::= { usbConfigDescTable 1 }
UsbConfigDescEntry ::=
SEQUENCE {
usbConfigDescDevAddr INTEGER,
usbConfigDescTotalLength INTEGER,
usbConfigDescNumInterfaces INTEGER,
usbConfigDescConfigValue INTEGER,
usbConfigDescTxtConfiguration DisplayString,
usbConfigDescAttributes INTEGER,
usbConfigDescMaxPower INTEGER,
usbConfigDescRawData OCTET STRING
}
usbConfigDescDevAddr OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DevAddr = (slot << 12) | (unit << 8) | (Enum << 4).
Enum is assigned by the USB device enumerator."
::= { usbConfigDescEntry 1 }
usbConfigDescTotalLength OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Length of the configuration descriptor frame in bytes."
::= { usbConfigDescEntry 2 }
usbConfigDescNumInterfaces OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of interfaces supported by the USB device."
::= { usbConfigDescEntry 3 }
usbConfigDescConfigValue OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration value associated with this configuration."
::= { usbConfigDescEntry 4 }
usbConfigDescTxtConfiguration OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Human readable configuration description (if present)."
::= { usbConfigDescEntry 5 }
usbConfigDescAttributes OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The following attributes are currently defined
by the USB standard:
Bit 7 - bus powered
Bit 6 - self powered
Bit 5 - remote wakeup
Bit 4-0 - reserved."
::= { usbConfigDescEntry 6 }
usbConfigDescMaxPower OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum power consumption in steps of 2 mA."
::= { usbConfigDescEntry 7 }
usbConfigDescRawData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Configuration descriptor raw data for debugging purposes only."
::= { usbConfigDescEntry 8 }
---------------------------------------------------------------------------
usbInterfaceDescTable OBJECT-TYPE
SYNTAX SEQUENCE OF UsbInterfaceDescEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the interfaces provided by
the detected USB device configuration."
::= { usb 3 }
usbInterfaceDescEntry OBJECT-TYPE
SYNTAX UsbInterfaceDescEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"(one entry of usbInterfaceDescTable)"
INDEX { usbInterfaceDescDevAddr, usbInterfaceDescInterfaceNumber }
::= { usbInterfaceDescTable 1 }
UsbInterfaceDescEntry ::=
SEQUENCE {
usbInterfaceDescDevAddr INTEGER,
usbInterfaceDescInterfaceNumber INTEGER,
usbInterfaceDescAltSettings INTEGER,
usbInterfaceDescNumEndpoints INTEGER,
usbInterfaceDescDeviceClass INTEGER,
usbInterfaceDescDeviceSubClass INTEGER,
usbInterfaceDescDeviceProtocol INTEGER,
usbInterfaceDescIdxInterface INTEGER,
usbInterfaceDescRawData OCTET STRING
}
usbInterfaceDescDevAddr OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DevAddr = (slot << 12) | (unit << 8) | (Enum << 4).
Enum is assigned by the USB device enumerator."
::= { usbInterfaceDescEntry 1 }
usbInterfaceDescInterfaceNumber OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of this interface."
::= { usbInterfaceDescEntry 2 }
usbInterfaceDescAltSettings OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value used to select alternative setting."
::= { usbInterfaceDescEntry 3 }
usbInterfaceDescNumEndpoints OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of endpoints provided by this interface."
::= { usbInterfaceDescEntry 4 }
usbInterfaceDescDeviceClass OBJECT-TYPE
SYNTAX INTEGER {
unspec(0),
audio(1),
cdc(2),
hid(3),
physical(5),
image(6),
printer(7),
msc(8),
hub(9),
cdc-data(10),
smartcard(11),
firm-upd(12),
security(13),
diagnostic(220),
wireless(224),
appl-spec(254),
vendor-spec(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class code (assigned by usb.org)."
::= { usbInterfaceDescEntry 5 }
usbInterfaceDescDeviceSubClass OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subclass code (assigned by usb.org)."
::= { usbInterfaceDescEntry 6 }
usbInterfaceDescDeviceProtocol OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The class dependent protocol code."
::= { usbInterfaceDescEntry 7 }
usbInterfaceDescIdxInterface OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index to the string describing the interface (if present)."
::= { usbInterfaceDescEntry 8 }
usbInterfaceDescRawData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..9))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface descriptor raw data for debugging purposes only."
::= { usbInterfaceDescEntry 9 }
---------------------------------------------------------------------------
usbEndpointDescTable OBJECT-TYPE
SYNTAX SEQUENCE OF UsbEndpointDescEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the endpoints provided by
the detected USB device configuration."
::= { usb 4 }
usbEndpointDescEntry OBJECT-TYPE
SYNTAX UsbEndpointDescEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"(one entry of usbEndpointDescEntry)"
INDEX { usbEndpointDescDevAddr, usbEndpointDescIfcIndex }
::= { usbEndpointDescTable 1 }
UsbEndpointDescEntry ::=
SEQUENCE {
usbEndpointDescDevAddr INTEGER,
usbEndpointDescIfcIndex INTEGER,
usbEndpointDescIfcNum INTEGER,
usbEndpointDescEpAddress INTEGER,
usbEndpointDescPipeDirection INTEGER,
usbEndpointDescPipeType INTEGER,
usbEndpointDescAttributes INTEGER,
usbEndpointDescMaxPacketSize INTEGER,
usbEndpointDescInterval INTEGER,
usbEndpointDescRawData OCTET STRING,
usbEndpointStatXferPackets Counter32,
usbEndpointStatXferBytes Counter32,
usbEndpointStatXferQlen Counter32,
usbEndpointStatXferStalled Counter32,
usbEndpointStatXferIoError Counter32,
usbEndpointStatXferBabble Counter32,
usbEndpointStatXferOverrun Counter32,
usbEndpointStatXferToggle Counter32
}
usbEndpointDescDevAddr OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DevAddr = (slot << 12) | (unit << 8) | (Enum << 4) | IfcNum.
Enum is assigned by the USB device enumerator."
::= { usbEndpointDescEntry 1 }
usbEndpointDescIfcIndex OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index = PipeType << 5 | PipeDirection << 4 | EpAddress.
Used for unique enumeration of the endpoints."
::= { usbEndpointDescEntry 2 }
usbEndpointDescIfcNum OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number of the endpoints interface."
::= { usbEndpointDescEntry 3 }
usbEndpointDescEpAddress OBJECT-TYPE
SYNTAX INTEGER(0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The endpoints address (direction bit stripped)."
::= { usbEndpointDescEntry 4 }
usbEndpointDescPipeDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transfer direction of this endpoint."
::= { usbEndpointDescEntry 5 }
usbEndpointDescPipeType OBJECT-TYPE
SYNTAX INTEGER {
ctrl(1),
iso(2),
bulk(3),
intr(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The endpoint type extracted from the
endpoint descriptor attribute field."
::= { usbEndpointDescEntry 6 }
usbEndpointDescAttributes OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Complete endpoint atribute field. For debugging only."
::= { usbEndpointDescEntry 7 }
usbEndpointDescMaxPacketSize OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum packet size the endpoint
is capable of sending or receiving."
::= { usbEndpointDescEntry 8 }
usbEndpointDescInterval OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval for polling endpoint data transfers (in frame counts).
Ignored for bulk and control endpoints.
Iso endpoints must be equal 1.
Field may range from 1 to 255 for interrupt endpoints."
::= { usbEndpointDescEntry 9 }
usbEndpointDescRawData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Endpoint descriptor raw data for debugging purposes only."
::= { usbEndpointDescEntry 10 }
usbEndpointStatXferPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets transferred by the endpoint."
::= { usbEndpointDescEntry 11 }
usbEndpointStatXferBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes transferred by the endpoint."
::= { usbEndpointDescEntry 12 }
usbEndpointStatXferQlen OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames enqueued at the endpoint."
::= { usbEndpointDescEntry 13 }
usbEndpointStatXferStalled OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of stall conditions detected."
::= { usbEndpointDescEntry 14 }
usbEndpointStatXferIoError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of I/O errors detected."
::= { usbEndpointDescEntry 15 }
usbEndpointStatXferBabble OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Babble errors detected."
::= { usbEndpointDescEntry 16 }
usbEndpointStatXferOverrun OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Frame Overrun errors detected."
::= { usbEndpointDescEntry 17 }
usbEndpointStatXferToggle OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Toggle errors detected."
::= { usbEndpointDescEntry 18 }
-- end: USB
---------------------------------------------------------------------------
END
View Git Blame Copy Permalink