1214 lines
38 KiB
Plaintext
1214 lines
38 KiB
Plaintext
TED-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission,
|
|
NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI -- RFC 2578
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- RFC 2580
|
|
TEXTUAL-CONVENTION, RowPointer
|
|
FROM SNMPv2-TC -- RFC 2579
|
|
IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC
|
|
FROM IANA-GMPLS-TC-MIB -- RFC 4802
|
|
InetAddress, InetAddressType
|
|
FROM INET-ADDRESS-MIB -- RFC 4001
|
|
Float32TC
|
|
FROM FLOAT-TC-MIB -- RFC 6340
|
|
;
|
|
|
|
tedMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201212210000Z" -- 21 Dec. 2012 00:00:00 GMT
|
|
ORGANIZATION "IETF CCAMP Working Group."
|
|
CONTACT-INFO
|
|
" Tomohiro Otani
|
|
Tm-otani@kddi.com
|
|
|
|
Masanori Miyazawa
|
|
ma-miyazawa@kddilabs.jp
|
|
|
|
Thomas D. Nadeau
|
|
tnadeau@juniper.net
|
|
|
|
Kenji Kumaki
|
|
ke-kumaki@kddi.com
|
|
|
|
Comments and discussion to ccamp@ietf.org"
|
|
DESCRIPTION
|
|
"This MIB module contains managed object definitions for TED in
|
|
support of MPLS/GMPLS TE Database.
|
|
|
|
Copyright (c) 2013 IETF Trust and the persons identified as
|
|
authors of the code. All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, is permitted pursuant to, and subject to the license
|
|
terms contained in, the Simplified BSD License set forth in
|
|
Section 4.c of the IETF Trust's Legal Provisions Relating to IETF
|
|
Documents (http://trustee.ietf.org/license-info)."
|
|
-- Revision history.
|
|
REVISION
|
|
"201212210000Z" -- 21 Dec. 2012 00:00:00 GMT
|
|
DESCRIPTION
|
|
"Initial version. Published as RFC 6825."
|
|
::= { transmission 273 }
|
|
-- assigned by IANA; see Section 9 for details.
|
|
|
|
-- Textual Conventions.
|
|
|
|
TedAreaIdTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The area identifier of the IGP. If OSPF is used to advertise
|
|
LSA, this represents an ospfArea. If IS-IS is used, this
|
|
represents an area address."
|
|
SYNTAX OCTET STRING (SIZE (0..20))
|
|
|
|
TedRouterIdTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router identifier. If OSPF is used to advertise LSA, this
|
|
represents a Router ID. If IS-IS is used, this represents a
|
|
System ID."
|
|
SYNTAX OCTET STRING (SIZE (0..6))
|
|
|
|
TedLinkIndexTC ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The link identifier. If OSPF is used, this represents an
|
|
ospfLsdbID. If IS-IS is used, this represents an isisLSPID.
|
|
If a locally configured link is used, this object represents an
|
|
arbitrary value, which is locally defined in a router."
|
|
SYNTAX OCTET STRING (SIZE (0..8))
|
|
|
|
-- Top-level components of this MIB module.
|
|
|
|
tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 }
|
|
tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 }
|
|
tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 }
|
|
|
|
-- TED Table
|
|
|
|
tedTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table indicates multiple TED information, which has been
|
|
supported by RFC 3630 and RFC 5305."
|
|
::= { tedObjects 1 }
|
|
|
|
tedEntry OBJECT-TYPE
|
|
SYNTAX TedEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains TED information commonly utilized in both
|
|
MPLS and GMPLS."
|
|
INDEX { tedLocalRouterId, tedRemoteRouterId,
|
|
tedLinkInformationSource, tedLinkIndex }
|
|
::= { tedTable 1 }
|
|
|
|
TedEntry ::= SEQUENCE {
|
|
tedLinkInformationSource INTEGER,
|
|
tedLocalRouterId TedRouterIdTC,
|
|
tedRemoteRouterId TedRouterIdTC,
|
|
tedLinkIndex TedLinkIndexTC,
|
|
tedLinkInformationData RowPointer,
|
|
tedLinkState INTEGER,
|
|
tedAreaId TedAreaIdTC,
|
|
tedLinkType INTEGER,
|
|
tedTeRouterIdAddrType InetAddressType,
|
|
tedTeRouterIdAddr InetAddress,
|
|
tedLinkIdAddrType InetAddressType,
|
|
tedLinkIdAddr InetAddress,
|
|
tedMetric Integer32,
|
|
tedMaxBandwidth Float32TC,
|
|
tedMaxReservableBandwidth Float32TC,
|
|
tedUnreservedBandwidthPri0 Float32TC,
|
|
tedUnreservedBandwidthPri1 Float32TC,
|
|
tedUnreservedBandwidthPri2 Float32TC,
|
|
tedUnreservedBandwidthPri3 Float32TC,
|
|
tedUnreservedBandwidthPri4 Float32TC,
|
|
tedUnreservedBandwidthPri5 Float32TC,
|
|
tedUnreservedBandwidthPri6 Float32TC,
|
|
tedUnreservedBandwidthPri7 Float32TC,
|
|
tedAdministrativeGroup Integer32,
|
|
tedLocalId Integer32,
|
|
tedRemoteId Integer32,
|
|
tedLinkProtectionType BITS
|
|
}
|
|
|
|
tedLinkInformationSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
locallyConfigured(1),
|
|
ospfv2(2),
|
|
ospfv3(3),
|
|
isis(4),
|
|
other(5)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the source of the information about the
|
|
TE link."
|
|
::= { tedEntry 1 }
|
|
|
|
tedLocalRouterId OBJECT-TYPE
|
|
SYNTAX TedRouterIdTC
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the Router ID of the router originating
|
|
the LSA. If OSPF is used to advertise LSA, this represents a
|
|
Router ID. If IS-IS is used, this represents a System ID.
|
|
Otherwise, this represents zero."
|
|
REFERENCE
|
|
"OSPF Version 2, RFC 2328, Appendix C.1
|
|
OSPF for IPv6, RFC 5340, Appendix C.1
|
|
ISO10589, Section 7.1"
|
|
::= { tedEntry 2 }
|
|
|
|
tedRemoteRouterId OBJECT-TYPE
|
|
SYNTAX TedRouterIdTC
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the router at the remote end of the link
|
|
from the originating router. If OSPF is used to advertise LSA,
|
|
this represents a Link ID in the Link TLV. If IS-IS is used,
|
|
this represents a neighbor System ID defined in RFC 5305.
|
|
Otherwise, this represents zero."
|
|
REFERENCE
|
|
"OSPF Version 2, RFC 2328, Appendix C.1
|
|
OSPF for IPv6, RFC 5340, Appendix C.1
|
|
ISO10589, Section 7.1"
|
|
::= { tedEntry 3 }
|
|
|
|
tedLinkIndex OBJECT-TYPE
|
|
SYNTAX TedLinkIndexTC
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the link state identifier. If OSPF is
|
|
used, this represents an ospfLsdbID. If IS-IS is used, this
|
|
represents an isisLSPID. Otherwise, this represents a unique
|
|
identifier within a node."
|
|
REFERENCE
|
|
"OSPF Version 2, RFC 2328, Appendix A.4.1,
|
|
OSPF for IPv6, RFC 5340, Appendix A.4.2
|
|
ISO10589, Section 9.8 "
|
|
::= { tedEntry 4 }
|
|
|
|
tedLinkInformationData OBJECT-TYPE
|
|
SYNTAX RowPointer
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If tedLinkInformationSource has the value unknown(0), this
|
|
object MUST contain a value of zeroDotZero.
|
|
|
|
If tedLinkInformationSource has the value locallyConfigured(1),
|
|
an implementation can use this object to supply the identifier
|
|
of the corresponding row entry in the teLinkTable of TE-LINK-
|
|
STD-MIB (RFC 4220), the identifier of the corresponding row in
|
|
a local proprietary TE link MIB module, or the value of
|
|
zeroDotZero.
|
|
|
|
If tedLinkInformationSource has the value ospfv2(2) and
|
|
ospfv3(3), an implementation can use this object to supply the
|
|
|
|
identifier of the corresponding row entry in the
|
|
ospfLocalLsdbTable (OSPFv2-MIB) and the ospfv3AreaLsdbTable
|
|
(OSPFv3-MIB), or the value of zeroDotZero.
|
|
|
|
If tedLinkInformationSource has the value isis(4), an
|
|
implementation can use this object to supply the identifier of
|
|
the corresponding row entry in the isisAreaAddr of ISIS-MIB
|
|
(RFC 4444), or the value of zeroDotZero.
|
|
|
|
If tedLinkInformationSource has the value other(5), an
|
|
implementation can use this object to supply the identifier of
|
|
the corresponding row entry in the local proprietary MIB module,
|
|
or the value of zeroDotZero."
|
|
::= { tedEntry 5 }
|
|
|
|
tedLinkState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (0),
|
|
up (1),
|
|
down (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object represents the actual operational state of this TE
|
|
link. For instance, if a row is created in the TED table, but
|
|
the actual TE link is not available for some reason (e.g., when
|
|
there is not yet a physical link or the link has been manually
|
|
disabled), then the object would be down(2) state.
|
|
In contrast, if a row is added and the TE link is available,
|
|
this would be operationally up(1)."
|
|
::= { tedEntry 6 }
|
|
|
|
tedAreaId OBJECT-TYPE
|
|
SYNTAX TedAreaIdTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the area identifier of the IGP. If OSPF
|
|
is used to advertise LSA, this represents an ospfArea. If IS-IS
|
|
is used, this represents an area address. Otherwise, this
|
|
represents zero."
|
|
REFERENCE
|
|
"OSPF Version 2, RFC 2328, Appendix C.2
|
|
OSPF for IPv6, RFC 5340, Appendix C.2
|
|
ISO10589, Section 9.8"
|
|
::= { tedEntry 7 }
|
|
|
|
tedLinkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pointToPoint (1),
|
|
multiAccess (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the type of the link, such as point to point or
|
|
multi-access."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.1"
|
|
::= { tedEntry 8 }
|
|
|
|
tedTeRouterIdAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the TE-Router ID address type. Only
|
|
values unknown(0), ipv4(1), or ipv6(2) are supported."
|
|
::= { tedEntry 9 }
|
|
|
|
tedTeRouterIdAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the TE-Router ID."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.4.1
|
|
IS-IS extensions for TE, RFC 5305, Section 4.3"
|
|
::= { tedEntry 10 }
|
|
|
|
tedLinkIdAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the address type of the TE Link ID. Only
|
|
values unknown(0), ipv4(1), or ipv6(2) are supported."
|
|
::= { tedEntry 11 }
|
|
|
|
tedLinkIdAddr OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the Router ID of the neighbor in the case of
|
|
point-to-point links. This also indicates the interface
|
|
address of the designated router in the case of multi-access
|
|
links."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.2
|
|
IS-IS extensions for TE, RFC 5305, Section 4.3"
|
|
::= { tedEntry 12 }
|
|
|
|
tedMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the traffic engineering metric value of the TE
|
|
link."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.5
|
|
IS-IS extensions for TE, RFC 5305, Section 3.7"
|
|
::= { tedEntry 13 }
|
|
|
|
tedMaxBandwidth OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the maximum bandwidth that can be used on this
|
|
link in this direction."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.6
|
|
IS-IS extensions for TE, RFC 5305, Section 3.4"
|
|
::= { tedEntry 14 }
|
|
|
|
tedMaxReservableBandwidth OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the maximum bandwidth that may be reserved on
|
|
this link in this direction."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.7
|
|
IS-IS extensions for TE, RFC 5305, Section 3.5"
|
|
::= { tedEntry 15 }
|
|
|
|
tedUnreservedBandwidthPri0 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the amount of bandwidth not yet reserved at the
|
|
priority 0."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.8
|
|
IS-IS extensions for TE, RFC 5305, Section 3.6"
|
|
::= { tedEntry 16 }
|
|
|
|
tedUnreservedBandwidthPri1 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the amount of bandwidth not yet reserved at the
|
|
priority 1."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.8
|
|
IS-IS extensions for TE, RFC 5305, Section 3.6"
|
|
::= { tedEntry 17 }
|
|
|
|
tedUnreservedBandwidthPri2 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the amount of bandwidth not yet reserved at the
|
|
priority 2."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.8
|
|
IS-IS extensions for TE, RFC 5305, Section 3.6"
|
|
::= { tedEntry 18 }
|
|
|
|
tedUnreservedBandwidthPri3 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the amount of bandwidth not yet reserved at the
|
|
priority 3."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.8
|
|
IS-IS extensions for TE, RFC 5305, Section 3.6"
|
|
::= { tedEntry 19 }
|
|
|
|
tedUnreservedBandwidthPri4 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the amount of bandwidth not yet reserved at the
|
|
priority 4."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.8
|
|
IS-IS extensions for TE, RFC 5305, Section 3.6"
|
|
::= { tedEntry 20 }
|
|
|
|
tedUnreservedBandwidthPri5 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the amount of bandwidth not yet reserved at the
|
|
priority 5."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.8
|
|
IS-IS extensions for TE, RFC 5305, Section 3.6"
|
|
::= { tedEntry 21 }
|
|
|
|
tedUnreservedBandwidthPri6 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the amount of bandwidth not yet reserved at the
|
|
priority 6."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.8
|
|
IS-IS extensions for TE, RFC 5305, 3.6"
|
|
::= { tedEntry 22 }
|
|
|
|
tedUnreservedBandwidthPri7 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the amount of bandwidth not yet reserved at the
|
|
priority 7."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.8
|
|
IS-IS extensions for TE, RFC 5305, Section 3.6"
|
|
::= { tedEntry 23 }
|
|
|
|
tedAdministrativeGroup OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the Administrative Group to which the link
|
|
belongs. Since the value is a bit mask, the link can belong
|
|
to multiple groups. This is also called Resource Class/Color."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.9
|
|
IS-IS extensions for TE, RFC 5305, Section 3.1"
|
|
::= { tedEntry 24 }
|
|
|
|
tedLocalId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the Link Local Identifier of an unnumbered
|
|
link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.1
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.1"
|
|
::= { tedEntry 25 }
|
|
|
|
tedRemoteId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This indicates the Link Remote Identifier of an unnumbered
|
|
link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.1
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.1"
|
|
::= { tedEntry 26 }
|
|
|
|
tedLinkProtectionType OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
extraTraffic(0),
|
|
unprotected(1),
|
|
shared (2),
|
|
dedicatedOneToOne (3),
|
|
dedicatedOnePlusOne(4),
|
|
enhanced(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the protection type of the TE link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.2
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.2"
|
|
::= { tedEntry 27 }
|
|
|
|
-- TED Local Interface IP Address Table
|
|
|
|
tedLocalIfAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TedLocalIfAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the IP address information of a local TE
|
|
link."
|
|
::= { tedObjects 2 }
|
|
|
|
tedLocalIfAddrEntry OBJECT-TYPE
|
|
SYNTAX TedLocalIfAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains the IP address information of the local TE
|
|
link."
|
|
INDEX { tedLinkIndex, tedLocalIfAddr }
|
|
::= { tedLocalIfAddrTable 1 }
|
|
|
|
TedLocalIfAddrEntry ::= SEQUENCE {
|
|
tedLocalIfAddrType InetAddressType,
|
|
tedLocalIfAddr InetAddress
|
|
}
|
|
|
|
tedLocalIfAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the address type of the local TE link.
|
|
Only values unknown(0), ipv4(1), or ipv6(2) have to be
|
|
supported."
|
|
::= { tedLocalIfAddrEntry 1 }
|
|
|
|
tedLocalIfAddr OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE (1..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the address of the local TE link."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.3,
|
|
Traffic Engineering Extensions to OSPF Version 3, RFC 5329,
|
|
Section 4.3
|
|
IS-IS extensions for TE, RFC 5305, Section 3.4"
|
|
::= { tedLocalIfAddrEntry 2 }
|
|
|
|
-- TED Remote Interface IP Address Table
|
|
|
|
tedRemoteIfAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TedRemoteIfAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the IP address information of a remote TE
|
|
link."
|
|
::= { tedObjects 3 }
|
|
|
|
tedRemoteIfAddrEntry OBJECT-TYPE
|
|
SYNTAX TedRemoteIfAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains the IP address information of the remote
|
|
TE link."
|
|
INDEX { tedLinkIndex, tedRemoteIfAddr }
|
|
::= { tedRemoteIfAddrTable 1 }
|
|
|
|
TedRemoteIfAddrEntry ::= SEQUENCE {
|
|
tedRemoteIfAddrType InetAddressType,
|
|
tedRemoteIfAddr InetAddress
|
|
}
|
|
|
|
tedRemoteIfAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the address type of the remote TE link."
|
|
::= { tedRemoteIfAddrEntry 1 }
|
|
|
|
tedRemoteIfAddr OBJECT-TYPE
|
|
SYNTAX InetAddress(SIZE (1..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the address of the remote TE link."
|
|
REFERENCE
|
|
"Traffic Engineering (TE) Extensions to OSPF Version 2,
|
|
RFC 3630, Section 2.5.4,
|
|
Traffic Engineering Extensions to OSPF Version3, RFC 5329,
|
|
Section 4.4
|
|
IS-IS extensions for TE, RFC 5305, Section 3.3"
|
|
::= { tedRemoteIfAddrEntry 2 }
|
|
|
|
-- TED Switching Capability Table
|
|
|
|
tedSwCapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TedSwCapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the GMPLS TED switching capability
|
|
information."
|
|
::= { tedObjects 4 }
|
|
|
|
tedSwCapEntry OBJECT-TYPE
|
|
SYNTAX TedSwCapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry relates each TE link with its GMPLS TE switching
|
|
capability information. If the MIB module deals with only OSPF-
|
|
TE information, the value of each object related with GMPLS TE
|
|
extensions should be null."
|
|
INDEX { tedLinkIndex, tedSwCapIndex }
|
|
::= { tedSwCapTable 1 }
|
|
|
|
TedSwCapEntry ::= SEQUENCE {
|
|
tedSwCapIndex Unsigned32,
|
|
tedSwCapType IANAGmplsSwitchingTypeTC,
|
|
tedSwCapEncoding IANAGmplsLSPEncodingTypeTC,
|
|
tedSwCapMaxLspBandwidthPri0 Float32TC,
|
|
tedSwCapMaxLspBandwidthPri1 Float32TC,
|
|
tedSwCapMaxLspBandwidthPri2 Float32TC,
|
|
tedSwCapMaxLspBandwidthPri3 Float32TC,
|
|
tedSwCapMaxLspBandwidthPri4 Float32TC,
|
|
tedSwCapMaxLspBandwidthPri5 Float32TC,
|
|
tedSwCapMaxLspBandwidthPri6 Float32TC,
|
|
tedSwCapMaxLspBandwidthPri7 Float32TC,
|
|
tedSwCapMinLspBandwidth Float32TC,
|
|
tedSwCapIfMtu Integer32,
|
|
tedSwCapIndication INTEGER
|
|
}
|
|
|
|
tedSwCapIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index is utilized to identify multiple switching
|
|
functions on a local or remote TE link according to definitions
|
|
of textual conventions of GMPLS, RFC 4801."
|
|
::= { tedSwCapEntry 1 }
|
|
|
|
tedSwCapType OBJECT-TYPE
|
|
SYNTAX IANAGmplsSwitchingTypeTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the GMPLS switching capability assigned
|
|
to the TE link according to definitions of textual conventions
|
|
of GMPLS, RFC 4801."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 2 }
|
|
|
|
tedSwCapEncoding OBJECT-TYPE
|
|
SYNTAX IANAGmplsLSPEncodingTypeTC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the GMPLS encoding type assigned to the
|
|
TE link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 3 }
|
|
|
|
tedSwCapMaxLspBandwidthPri0 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum bandwidth of the TE link at
|
|
the priority 0 for GMPLS LSP creation."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 4 }
|
|
|
|
tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum bandwidth of the TE link at
|
|
the priority 1 for GMPLS LSP creation."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 5 }
|
|
|
|
tedSwCapMaxLspBandwidthPri2 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum bandwidth of the TE link at
|
|
the priority 2 for GMPLS LSP creation."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 6 }
|
|
|
|
tedSwCapMaxLspBandwidthPri3 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum bandwidth of the TE link at
|
|
the priority 3 for GMPLS LSP creation."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 7 }
|
|
|
|
tedSwCapMaxLspBandwidthPri4 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum bandwidth of the TE link at
|
|
the priority 4 for GMPLS LSP creation."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 8 }
|
|
|
|
tedSwCapMaxLspBandwidthPri5 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum bandwidth of the TE link at
|
|
the priority 5 for GMPLS LSP creation."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 9 }
|
|
|
|
tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum bandwidth of the TE link at
|
|
the priority 6 for GMPLS LSP creation."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 10 }
|
|
|
|
tedSwCapMaxLspBandwidthPri7 OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the maximum bandwidth of the TE link at
|
|
the priority 7 for GMPLS LSP creation."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 11 }
|
|
|
|
tedSwCapMinLspBandwidth OBJECT-TYPE
|
|
SYNTAX Float32TC
|
|
UNITS "Byte per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the minimum bandwidth of the TE link for
|
|
GMPLS LSP creation if the switching capability field is TDM,
|
|
PSC-1, PSC-2, PSC-3, or PSC-4."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 12 }
|
|
|
|
tedSwCapIfMtu OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the MTU of the local or remote TE link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 13 }
|
|
|
|
tedSwCapIndication OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
standard (0),
|
|
arbitrary (1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether the interface supports Standard
|
|
or Arbitrary SONET/SDH."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.4
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.3"
|
|
::= { tedSwCapEntry 14 }
|
|
|
|
-- TED SRLG Table
|
|
|
|
tedSrlgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TedSrlgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the SRLG information of the TE link."
|
|
::= { tedObjects 5 }
|
|
|
|
tedSrlgEntry OBJECT-TYPE
|
|
SYNTAX TedSrlgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry relates each TE link with its SRLG information."
|
|
INDEX { tedLinkIndex, tedSrlgIndex }
|
|
::= { tedSrlgTable 1 }
|
|
|
|
TedSrlgEntry ::= SEQUENCE {
|
|
tedSrlgIndex Unsigned32,
|
|
tedSrlg Integer32
|
|
}
|
|
|
|
tedSrlgIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This index is utilized to identify multiple SRLG values on a
|
|
local or remote TE link. This object represents an arbitrary
|
|
value, which is locally defined in a router."
|
|
REFERENCE
|
|
"OSPF Extensions in support of GMPLS, RFC 4203, Section 1.3
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.4"
|
|
::= { tedSrlgEntry 1 }
|
|
|
|
tedSrlg OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the SRLG value assigned to a local or
|
|
remote TE link."
|
|
REFERENCE
|
|
"OSPF Extensions in Support of GMPLS, RFC 4203, Section 1.3
|
|
IS-IS Extensions in Support of GMPLS, RFC 5307, Section 1.4"
|
|
::= { tedSrlgEntry 2 }
|
|
|
|
-- Notification Configuration
|
|
|
|
tedStatusChangeNotificationMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A lot of notifications relating to the status change are
|
|
expected to generate in a node, especially when a network
|
|
failure occurs and might cause a performance degradation of the
|
|
node itself. To avoid such a defect, this object provides the
|
|
maximum number of notifications generated per minute. If
|
|
events occur more rapidly, the implementation may simply fail
|
|
to emit these notifications during that period, or may queue
|
|
them until an appropriate time. A value of 0 means no
|
|
throttling is applied and events may be notified at the rate at
|
|
which they occur."
|
|
DEFVAL {1}
|
|
::= { tedObjects 6 }
|
|
|
|
tedCreatedDeletedNotificationMaxRate OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A lot of notifications relating to new registration in the TED
|
|
table by receiving new TE link information or deletion of
|
|
existing entries in the TED table are expected to generate in a
|
|
node. This object provides the maximum number of notifications
|
|
generated per minute."
|
|
DEFVAL {1}
|
|
::= { tedObjects 7 }
|
|
|
|
-- Notifications
|
|
|
|
tedStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tedLinkState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification signifies that there has been change in the
|
|
TE information of tedTable, tedLocalIfAddrTable,
|
|
tedRemoteIfAddrTable, tedSwCapTable, and/or tedSrlgTable. For
|
|
example, this should be generated when tedUnreservedBandwidth is
|
|
changed to create or delete LSP using the registered TE link."
|
|
::= { tedNotifications 1 }
|
|
|
|
tedEntryCreated NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tedLinkState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification signifies that there has been new
|
|
registration in the TED table by receiving new TE link
|
|
information. For example, this should be generated when a new
|
|
index (tedLinkIndex) is registered in the TED table."
|
|
::= { tedNotifications 2 }
|
|
|
|
tedEntryDeleted NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
tedLinkState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification signifies that there has been deletion of an
|
|
entry in the TED table. For example, this should be generated
|
|
when one of the existing entries is deleted in the TED table."
|
|
::= { tedNotifications 3 }
|
|
|
|
-- Conformance Statement
|
|
|
|
tedCompliances
|
|
OBJECT IDENTIFIER ::= { tedConformance 1 }
|
|
tedGroups
|
|
OBJECT IDENTIFIER ::= { tedConformance 2 }
|
|
|
|
-- Module Compliance
|
|
|
|
tedModuleFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statement for agents provides full support for the
|
|
TED MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { tedMainGroup,
|
|
tedObjectsGroup,
|
|
tedNotificationGroup
|
|
}
|
|
|
|
GROUP tedUnnumberedLinkGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support the
|
|
unnumbered links."
|
|
|
|
GROUP tedNumberedLinkGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support the
|
|
numbered links."
|
|
|
|
GROUP tedSwCapGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support GMPLS
|
|
switching capability."
|
|
|
|
GROUP tedSwCapMinLspBandwidthGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links if the switching
|
|
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."
|
|
|
|
GROUP tedSwCapIfMtuGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support the MTU of
|
|
the local or remote TE link."
|
|
|
|
GROUP tedSwCapIndicationGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support Standard or
|
|
Arbitrary SONET/SDH."
|
|
|
|
GROUP tedSrlgGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support SRLG
|
|
information."
|
|
::= { tedCompliances 1 }
|
|
|
|
--
|
|
-- ReadOnly Compliance
|
|
--
|
|
|
|
tedModuleReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance requirement for implementations only provides read-
|
|
only support for TED. Such devices can then be monitored but
|
|
cannot be configured using this MIB module."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { tedMainGroup
|
|
}
|
|
|
|
GROUP tedUnnumberedLinkGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support the
|
|
unnumbered links."
|
|
|
|
GROUP tedNumberedLinkGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support the
|
|
numbered links."
|
|
|
|
GROUP tedSwCapGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support some GMPLS
|
|
switching capabilities."
|
|
|
|
GROUP tedSwCapMinLspBandwidthGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links if the switching
|
|
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."
|
|
|
|
GROUP tedSwCapIfMtuGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support the MTU of
|
|
the local or remote TE link."
|
|
|
|
GROUP tedSwCapIndicationGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support Standard or
|
|
Arbitrary SONET/SDH."
|
|
|
|
GROUP tedSrlgGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for TE links that support SRLG
|
|
information."
|
|
::= { tedCompliances 2 }
|
|
|
|
-- Units of conformance
|
|
|
|
tedMainGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tedLinkState,
|
|
tedAreaId,
|
|
tedLinkType,
|
|
tedTeRouterIdAddrType,
|
|
tedTeRouterIdAddr,
|
|
tedLinkIdAddrType,
|
|
tedLinkIdAddr,
|
|
tedMetric,
|
|
tedMaxBandwidth,
|
|
tedMaxReservableBandwidth,
|
|
tedUnreservedBandwidthPri0,
|
|
tedUnreservedBandwidthPri1,
|
|
tedUnreservedBandwidthPri2,
|
|
tedUnreservedBandwidthPri3,
|
|
tedUnreservedBandwidthPri4,
|
|
tedUnreservedBandwidthPri5,
|
|
tedUnreservedBandwidthPri6,
|
|
tedUnreservedBandwidthPri7,
|
|
tedAdministrativeGroup,
|
|
tedLinkProtectionType,
|
|
tedLinkInformationData
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Collection of objects for TED management"
|
|
::= { tedGroups 1 }
|
|
|
|
tedObjectsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tedStatusChangeNotificationMaxRate,
|
|
tedCreatedDeletedNotificationMaxRate
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects needed to implement notification."
|
|
::= { tedGroups 2 }
|
|
|
|
tedNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
tedStatusChange,
|
|
tedEntryCreated,
|
|
tedEntryDeleted
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group is mandatory for those implementations that can
|
|
implement the notifications contained in this group."
|
|
::= { tedGroups 3 }
|
|
|
|
tedUnnumberedLinkGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tedLocalId,
|
|
tedRemoteId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects needed to implement the unnumbered links."
|
|
::= { tedGroups 4 }
|
|
|
|
tedNumberedLinkGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tedLocalIfAddrType,
|
|
tedRemoteIfAddrType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects needed to implement the numbered links."
|
|
::= { tedGroups 5 }
|
|
|
|
tedSwCapGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tedSwCapType,
|
|
tedSwCapEncoding,
|
|
tedSwCapMaxLspBandwidthPri0,
|
|
tedSwCapMaxLspBandwidthPri1,
|
|
tedSwCapMaxLspBandwidthPri2,
|
|
tedSwCapMaxLspBandwidthPri3,
|
|
tedSwCapMaxLspBandwidthPri4,
|
|
tedSwCapMaxLspBandwidthPri5,
|
|
tedSwCapMaxLspBandwidthPri6,
|
|
tedSwCapMaxLspBandwidthPri7
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects needed to implement the TE links with GMPLS TE
|
|
switching capability information."
|
|
::= { tedGroups 6 }
|
|
|
|
tedSwCapMinLspBandwidthGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tedSwCapMinLspBandwidth
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects needed to implement the minimum bandwidth of the
|
|
TE link for GMPLS LSP creation."
|
|
::= { tedGroups 7 }
|
|
|
|
tedSwCapIfMtuGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tedSwCapIfMtu
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects needed to implement the MTU information of the
|
|
local or remote TE link."
|
|
::= { tedGroups 8 }
|
|
|
|
tedSwCapIndicationGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tedSwCapIndication
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects needed to implement the indication of whether the
|
|
interface supports Standard or Arbitrary SONET/SDH."
|
|
::= { tedGroups 9 }
|
|
|
|
tedSrlgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
tedSrlg
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects needed to implement multiple SRLG values with
|
|
GMPLS TE information."
|
|
::= { tedGroups 10 }
|
|
|
|
END
|