1365 lines
47 KiB
Plaintext
1365 lines
47 KiB
Plaintext
MALLOC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, mib-2,
|
|
Unsigned32, Gauge32, Counter32 FROM SNMPv2-SMI
|
|
|
|
RowStatus, TruthValue, StorageType FROM SNMPv2-TC
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
|
|
|
|
InetAddress, InetAddressType FROM INET-ADDRESS-MIB
|
|
|
|
LanguageTag FROM IPMROUTE-STD-MIB
|
|
|
|
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
|
|
|
|
IANAscopeSource, IANAmallocRangeSource FROM IANA-MALLOC-MIB;
|
|
|
|
mallocMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200306090000Z" -- June 9, 2003
|
|
ORGANIZATION "IETF MALLOC Working Group"
|
|
CONTACT-INFO
|
|
" WG-EMail: malloc@catarina.usc.edu
|
|
Subscribe: malloc-request@catarina.usc.edu
|
|
Archive: catarina.usc.edu/pub/multicast/malloc/
|
|
|
|
Co-chair/editor:
|
|
Dave Thaler
|
|
Microsoft Corporation
|
|
One Microsoft Way
|
|
Redmond, WA 98052
|
|
EMail: dthaler@microsoft.com
|
|
|
|
Co-chair:
|
|
Steve Hanna
|
|
Sun Microsystems, Inc.
|
|
One Network Drive
|
|
Burlington, MA 01803
|
|
EMail: steve.hanna@sun.com"
|
|
DESCRIPTION
|
|
"The MIB module for management of multicast address
|
|
allocation.
|
|
|
|
Copyright (C) The Internet Society (2003). This version of
|
|
this MIB module is part of RFC 3559; see the RFC itself for
|
|
full legal notices."
|
|
|
|
-- revision log
|
|
|
|
REVISION "200306090000Z" -- June 9, 2003
|
|
DESCRIPTION
|
|
"Initial version, published as RFC 3559."
|
|
::= { mib-2 101 }
|
|
|
|
mallocMIBObjects OBJECT IDENTIFIER ::= { mallocMIB 1 }
|
|
|
|
malloc OBJECT IDENTIFIER ::= { mallocMIBObjects 1 }
|
|
|
|
madcap OBJECT IDENTIFIER ::= { mallocMIBObjects 2 }
|
|
|
|
--
|
|
-- scalars
|
|
--
|
|
|
|
mallocCapabilities OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
startTime(0),
|
|
serverMobility(1),
|
|
retryAfter(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the capabilities which a client or
|
|
server supports. The startTime bit indicates that
|
|
allocations with a future start time are supported. The
|
|
serverMobility bit indicates that allocations can be renewed
|
|
or released from a server other than the one granting the
|
|
original allocation. The retryAfter bit indicates support
|
|
for a waiting state where the client may check back at a
|
|
later time to get the status of its request."
|
|
::= { malloc 1 }
|
|
|
|
--
|
|
-- the Scope Table
|
|
--
|
|
|
|
mallocScopeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MallocScopeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing information on multicast
|
|
scopes from which addresses may be allocated. Entries in
|
|
this table may be dynamically discovered via some other
|
|
|
|
protocol, such as MZAP, or may be statically configured,
|
|
such as in an isolated network environment. Each scope is
|
|
associated with a range of multicast addresses, and ranges
|
|
for different rows must be disjoint."
|
|
::= { malloc 2 }
|
|
|
|
mallocScopeEntry OBJECT-TYPE
|
|
SYNTAX MallocScopeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the information on a
|
|
particular multicast scope."
|
|
INDEX { mallocScopeAddressType, mallocScopeFirstAddress }
|
|
::= { mallocScopeTable 1 }
|
|
|
|
MallocScopeEntry ::= SEQUENCE {
|
|
mallocScopeAddressType InetAddressType,
|
|
mallocScopeFirstAddress InetAddress,
|
|
mallocScopeLastAddress InetAddress,
|
|
mallocScopeHopLimit Unsigned32,
|
|
mallocScopeStatus RowStatus,
|
|
mallocScopeSource IANAscopeSource,
|
|
mallocScopeDivisible TruthValue,
|
|
mallocScopeServerAddressType InetAddressType,
|
|
mallocScopeServerAddress InetAddress,
|
|
mallocScopeSSM TruthValue,
|
|
mallocScopeStorage StorageType
|
|
}
|
|
|
|
mallocScopeAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the addresses in the multicast scope range.
|
|
Legal values correspond to the subset of address families
|
|
for which multicast address allocation is supported."
|
|
::= { mallocScopeEntry 1 }
|
|
|
|
mallocScopeFirstAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(0..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first address in the multicast scope range. The type
|
|
of this address is determined by the value of the
|
|
mallocScopeAddressType object."
|
|
::= { mallocScopeEntry 2 }
|
|
|
|
mallocScopeLastAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(0..20))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last address in the multicast scope range. The type of
|
|
this address is determined by the value of the
|
|
mallocScopeAddressType object."
|
|
::= { mallocScopeEntry 3 }
|
|
|
|
mallocScopeHopLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The default IPv4 TTL or IPv6 hop limit which applications
|
|
should use for groups within the scope."
|
|
DEFVAL { 255 }
|
|
::= { mallocScopeEntry 4 }
|
|
|
|
mallocScopeStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table. If write
|
|
access is supported, the other writable objects in this
|
|
table may be modified even while the status is `active'."
|
|
::= { mallocScopeEntry 5 }
|
|
|
|
mallocScopeSource OBJECT-TYPE
|
|
SYNTAX IANAscopeSource
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The method by which this entry was learned."
|
|
::= { mallocScopeEntry 6 }
|
|
|
|
mallocScopeDivisible OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If false, the server may allocate addresses out of the
|
|
entire range. If true, the server must not allocate
|
|
|
|
addresses out of the entire range, but may only allocate
|
|
addresses out of a subrange learned via another method.
|
|
Creating or deleting a scope which is not divisible has the
|
|
side effect of creating or deleting the corresponding entry
|
|
in the mallocAllocRangeTable. Deleting a scope which is
|
|
divisible has the side effect of deleting any corresponding
|
|
entries in the mallocAllocRangeTable, and the
|
|
mallocRequestTable."
|
|
DEFVAL { false }
|
|
::= { mallocScopeEntry 7 }
|
|
|
|
mallocScopeServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the address of a multicast address allocation
|
|
server to which a request may be sent."
|
|
DEFVAL { unknown }
|
|
::= { mallocScopeEntry 8 }
|
|
|
|
mallocScopeServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of a multicast address allocation server to
|
|
which a request may be sent. The default value is an zero-
|
|
length address, indicating that no server is known. The
|
|
type of this address is determined by the value of the
|
|
mallocScopeServerAddressType object."
|
|
DEFVAL { ''h } -- the empty string
|
|
::= { mallocScopeEntry 9 }
|
|
|
|
mallocScopeSSM OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the scope is a Source-Specific Multicast
|
|
(SSM) range."
|
|
DEFVAL { false }
|
|
::= { mallocScopeEntry 10 }
|
|
|
|
mallocScopeStorage OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row. Conceptual rows
|
|
having the value 'permanent' need not allow write-access to
|
|
any columnar objects in the row."
|
|
DEFVAL { nonVolatile }
|
|
::= { mallocScopeEntry 11 }
|
|
|
|
--
|
|
-- the Scope Name Table
|
|
--
|
|
|
|
mallocScopeNameTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MallocScopeNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing information on multicast
|
|
scope names. Entries in this table may be dynamically
|
|
discovered via some other protocol, such as MZAP, or may be
|
|
statically configured, such as in an isolated network
|
|
environment."
|
|
::= { malloc 3 }
|
|
|
|
mallocScopeNameEntry OBJECT-TYPE
|
|
SYNTAX MallocScopeNameEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the information on a
|
|
particular multicast scope name."
|
|
INDEX { mallocScopeAddressType, mallocScopeFirstAddress,
|
|
IMPLIED mallocScopeNameLangName }
|
|
::= { mallocScopeNameTable 1 }
|
|
|
|
MallocScopeNameEntry ::= SEQUENCE {
|
|
mallocScopeNameLangName LanguageTag,
|
|
mallocScopeNameScopeName SnmpAdminString,
|
|
mallocScopeNameDefault TruthValue,
|
|
mallocScopeNameStatus RowStatus,
|
|
mallocScopeNameStorage StorageType
|
|
}
|
|
|
|
mallocScopeNameLangName OBJECT-TYPE
|
|
SYNTAX LanguageTag (SIZE(1..94))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RFC 3066 language tag for the language of the scope
|
|
name."
|
|
::= { mallocScopeNameEntry 1 }
|
|
|
|
mallocScopeNameScopeName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The textual name associated with the multicast scope. The
|
|
value of this object should be suitable for displaying to
|
|
end-users, such as when allocating a multicast address in
|
|
this scope. If the scope is an IPv4 scope, and no name is
|
|
specified, the default value of this object should be the
|
|
string 239.x.x.x/y with x and y replaced appropriately to
|
|
describe the address and mask length associated with the
|
|
scope. If the scope is an IPv6 scope, and no name is
|
|
specified, the default value of this object should
|
|
generically describe the scope level (e.g., site)."
|
|
::= { mallocScopeNameEntry 2 }
|
|
|
|
mallocScopeNameDefault OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, indicates a preference that the name in the
|
|
associated language should be used by applications if no
|
|
name is available in a desired language."
|
|
DEFVAL { false }
|
|
::= { mallocScopeNameEntry 3 }
|
|
|
|
mallocScopeNameStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table. If write
|
|
access is supported, the other writable objects in this
|
|
table may be modified even while the status is `active'."
|
|
::= { mallocScopeNameEntry 4 }
|
|
|
|
mallocScopeNameStorage OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row. Conceptual rows
|
|
having the value 'permanent' need not allow write-access to
|
|
any columnar objects in the row."
|
|
DEFVAL { nonVolatile }
|
|
::= { mallocScopeNameEntry 5 }
|
|
|
|
--
|
|
-- the Allocation Range Table
|
|
--
|
|
mallocAllocRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MallocAllocRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing information on subranges
|
|
of addresses from which the device may allocate addresses,
|
|
if it is a MAAS. If the device is a Prefix Coordinator, any
|
|
ranges which the device is advertising to MAAS's will be in
|
|
this table. Note that the device may be both a MAAS and a
|
|
Prefix Coordinator.
|
|
|
|
Address ranges for different rows must be disjoint, and must
|
|
be contained with the address range of the corresponding row
|
|
of the mallocScopeTable.
|
|
|
|
Deleting an allocation range has the side effect of deleting
|
|
any entries within that range from the mallocAddressTable."
|
|
::= { malloc 4 }
|
|
|
|
mallocAllocRangeEntry OBJECT-TYPE
|
|
SYNTAX MallocAllocRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the information on a
|
|
particular allocation range."
|
|
INDEX { mallocScopeAddressType, mallocScopeFirstAddress,
|
|
mallocAllocRangeFirstAddress }
|
|
::= { mallocAllocRangeTable 1 }
|
|
|
|
MallocAllocRangeEntry ::= SEQUENCE {
|
|
mallocAllocRangeFirstAddress InetAddress,
|
|
mallocAllocRangeLastAddress InetAddress,
|
|
mallocAllocRangeStatus RowStatus,
|
|
mallocAllocRangeSource IANAmallocRangeSource,
|
|
mallocAllocRangeLifetime Unsigned32,
|
|
mallocAllocRangeMaxLeaseAddrs Unsigned32,
|
|
mallocAllocRangeMaxLeaseTime Unsigned32,
|
|
mallocAllocRangeNumAllocatedAddrs Gauge32,
|
|
mallocAllocRangeNumOfferedAddrs Gauge32,
|
|
mallocAllocRangeNumWaitingAddrs Gauge32,
|
|
mallocAllocRangeNumTryingAddrs Gauge32,
|
|
mallocAllocRangeAdvertisable TruthValue,
|
|
mallocAllocRangeTotalAllocatedAddrs Gauge32,
|
|
mallocAllocRangeTotalRequestedAddrs Gauge32,
|
|
mallocAllocRangeStorage StorageType
|
|
}
|
|
|
|
mallocAllocRangeFirstAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(0..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first address in the allocation range. The type of
|
|
this address is determined by the value of the
|
|
mallocScopeAddressType object."
|
|
::= { mallocAllocRangeEntry 1 }
|
|
|
|
mallocAllocRangeLastAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(0..20))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The last address in the allocation range. The type of this
|
|
address is determined by the value of the
|
|
mallocScopeAddressType object."
|
|
::= { mallocAllocRangeEntry 2 }
|
|
|
|
mallocAllocRangeStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this row, by which new entries may be
|
|
created, or old entries deleted from this table. If write
|
|
access is supported, the other writable objects in this
|
|
table may be modified even while the status is `active'."
|
|
::= { mallocAllocRangeEntry 3 }
|
|
|
|
mallocAllocRangeSource OBJECT-TYPE
|
|
SYNTAX IANAmallocRangeSource
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The means by which this entry was learned."
|
|
::= { mallocAllocRangeEntry 4 }
|
|
|
|
mallocAllocRangeLifetime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds remaining in the lifetime of the
|
|
(sub)range out of which addresses are being allocated. A
|
|
value of 0 indicates that the range is not subject to
|
|
aging."
|
|
DEFVAL { 0 }
|
|
::= { mallocAllocRangeEntry 5 }
|
|
|
|
mallocAllocRangeMaxLeaseAddrs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of addresses which the server is willing
|
|
to grant for each future request in this range. A value of
|
|
0 means that no specific limit is enforced, as long as the
|
|
server has valid addresses to allocate."
|
|
DEFVAL { 0 }
|
|
::= { mallocAllocRangeEntry 6 }
|
|
|
|
mallocAllocRangeMaxLeaseTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum lifetime which the server will grant for future
|
|
requests in this range. A value of 0 means that no
|
|
additional limit is enforced beyond that of
|
|
mallocAllocRangeLifetime."
|
|
DEFVAL { 0 }
|
|
::= { mallocAllocRangeEntry 7 }
|
|
|
|
mallocAllocRangeNumAllocatedAddrs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of addresses in the range which have been
|
|
allocated. This value can be used to determine the current
|
|
address space utilization within the scoped range. This
|
|
|
|
should match the total number of addresses for this scope
|
|
covered by entries in the mallocAddressTable."
|
|
::= { mallocAllocRangeEntry 8 }
|
|
|
|
mallocAllocRangeNumOfferedAddrs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of addresses in the range which have been
|
|
offered. This number should match the sum of
|
|
mallocRequestNumAddrs for all entries in the
|
|
mallocRequestTable in the offered state. Together with
|
|
mallocAllocRangeNumAllocatedAddrs and
|
|
mallocAllocRangeNumTryingAddrs, this can be used to
|
|
determine the address space utilization within the scoped
|
|
range in the immediate future."
|
|
::= { mallocAllocRangeEntry 9 }
|
|
|
|
mallocAllocRangeNumWaitingAddrs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of addresses in the range which have been
|
|
requested, but whose state is waiting, while the server
|
|
attempts to acquire more address space."
|
|
::= { mallocAllocRangeEntry 10 }
|
|
|
|
mallocAllocRangeNumTryingAddrs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of addresses in the scope covered by entries in
|
|
the mallocRequestTable in the trying state."
|
|
::= { mallocAllocRangeEntry 11 }
|
|
|
|
mallocAllocRangeAdvertisable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object is true if the range is eligible
|
|
to be advertised to other MAASs. When the row is first
|
|
created, the default value of this object is true if the
|
|
scope is divisible, and is false otherwise."
|
|
::= { mallocAllocRangeEntry 12 }
|
|
|
|
mallocAllocRangeTotalAllocatedAddrs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The approximate number of addresses in the range which have
|
|
been allocated by any MAAS, as determined by a Prefix
|
|
Coordinator. This object need only be present if
|
|
mallocAllocRangeAdvertisable is true. If the number is
|
|
unknown, a value of 0 may be reported."
|
|
::= { mallocAllocRangeEntry 13 }
|
|
|
|
mallocAllocRangeTotalRequestedAddrs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The approximate number of addresses in the range for which
|
|
there is potential demand among MAASs, as determined by a
|
|
Prefix Coordinator. This object need only be present if
|
|
mallocAllocRangeAdvertisable is true. If the number is
|
|
unknown, a value of 0 may be reported."
|
|
::= { mallocAllocRangeEntry 14 }
|
|
|
|
mallocAllocRangeStorage OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this conceptual row. Conceptual rows
|
|
having the value 'permanent' need not allow write-access to
|
|
any columnar objects in the row."
|
|
DEFVAL { nonVolatile }
|
|
::= { mallocAllocRangeEntry 15 }
|
|
|
|
--
|
|
-- the Request Table
|
|
--
|
|
|
|
mallocRequestTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MallocRequestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing information on allocation
|
|
requests, whether allocated or in progress. This table may
|
|
also be used to determine which clients are responsible for
|
|
high address space utilization within a given scope.
|
|
|
|
Entries in this table reflect requests dynamically received
|
|
by an address allocation protocol."
|
|
::= { malloc 5 }
|
|
|
|
mallocRequestEntry OBJECT-TYPE
|
|
SYNTAX MallocRequestEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the information on a
|
|
particular allocation request."
|
|
INDEX { mallocRequestId }
|
|
::= { mallocRequestTable 1 }
|
|
|
|
MallocRequestEntry ::= SEQUENCE {
|
|
mallocRequestId Unsigned32,
|
|
mallocRequestScopeAddressType InetAddressType,
|
|
mallocRequestScopeFirstAddress InetAddress,
|
|
mallocRequestStartTime Unsigned32,
|
|
mallocRequestEndTime Unsigned32,
|
|
mallocRequestNumAddrs Unsigned32,
|
|
mallocRequestState INTEGER,
|
|
mallocRequestClientAddressType InetAddressType,
|
|
mallocRequestClientAddress InetAddress,
|
|
mallocRequestServerAddressType InetAddressType,
|
|
mallocRequestServerAddress InetAddress,
|
|
mallocRequestLeaseIdentifier OCTET STRING
|
|
}
|
|
|
|
mallocRequestId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary value identifying this row."
|
|
::= { mallocRequestEntry 1 }
|
|
|
|
mallocRequestScopeAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the first address of the scope to which the
|
|
request applies. Legal values correspond to the subset of
|
|
address families for which multicast address allocation is
|
|
supported."
|
|
::= { mallocRequestEntry 2 }
|
|
|
|
mallocRequestScopeFirstAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first address of the scope to which the request
|
|
applies. This must match mallocScopeFirstAddress for some
|
|
row in the mallocScopeTable. The type of this address is
|
|
determined by the value of the mallocRequestScopeAddressType
|
|
object."
|
|
::= { mallocRequestEntry 3 }
|
|
|
|
mallocRequestStartTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds remaining before the start time of
|
|
the request. A value of 0 means that the allocation is
|
|
currently in effect."
|
|
::= { mallocRequestEntry 4 }
|
|
|
|
mallocRequestEndTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds remaining before the end time of the
|
|
request."
|
|
::= { mallocRequestEntry 5 }
|
|
|
|
mallocRequestNumAddrs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of addresses requested. If the addresses have
|
|
been allocated, this number should match the total number of
|
|
addresses for this request covered by entries in the
|
|
mallocAddressTable."
|
|
::= { mallocRequestEntry 6 }
|
|
|
|
mallocRequestState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
allocated(1),
|
|
offered(2), -- tentatively allocated
|
|
|
|
waiting(3), -- waiting for more space
|
|
trying(4) -- working on allocating
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the request. A value of allocated(1)
|
|
indicates that one or more entries for this request are
|
|
present in the mallocAddressTable. A value of offered(2)
|
|
indicates that addresses have been offered to the client
|
|
(e.g. via a MADCAP OFFER message), but the allocation has
|
|
not been committed. A value of waiting(3) indicates that
|
|
the allocation is blocked while the server attempts to
|
|
acquire more space from which it can allocate addresses. A
|
|
value of trying(4) means that no addresses have been offered
|
|
to the client, but that an attempt to allocate is in
|
|
progress."
|
|
::= { mallocRequestEntry 7 }
|
|
|
|
mallocRequestClientAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the address of the client that (last) requested
|
|
this allocation."
|
|
::= { mallocRequestEntry 8 }
|
|
|
|
mallocRequestClientAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the client that (last) requested this
|
|
allocation. The type of this address is determined by the
|
|
value of the mallocRequestClientAddressType object."
|
|
::= { mallocRequestEntry 9 }
|
|
|
|
mallocRequestServerAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the address of the server to which the request
|
|
was (last) sent."
|
|
::= { mallocRequestEntry 10 }
|
|
|
|
mallocRequestServerAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The address of the server to which the request was (last)
|
|
sent. The type of this address is determined by the value
|
|
of the mallocRequestServerAddressType object."
|
|
::= { mallocRequestEntry 11 }
|
|
|
|
mallocRequestLeaseIdentifier OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Lease Identifier of this request. If the allocation
|
|
mechanism in use does not use Lease Identifiers, then the
|
|
value is a 0-length string."
|
|
::= { mallocRequestEntry 12 }
|
|
|
|
--
|
|
-- the Address Table
|
|
--
|
|
|
|
mallocAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MallocAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing information on blocks of
|
|
allocated addresses. This table may be used to map a given
|
|
multicast group address to the associated request."
|
|
::= { malloc 6 }
|
|
|
|
mallocAddressEntry OBJECT-TYPE
|
|
SYNTAX MallocAddressEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the information on a
|
|
particular block of allocated addresses. The block of
|
|
addresses covered by each entry in this table must fall
|
|
within a range corresponding to an entry in the
|
|
mallocAllocRangeTable."
|
|
INDEX { mallocAddressAddressType, mallocAddressFirstAddress }
|
|
::= { mallocAddressTable 1 }
|
|
|
|
MallocAddressEntry ::= SEQUENCE {
|
|
mallocAddressAddressType InetAddressType,
|
|
mallocAddressFirstAddress InetAddress,
|
|
mallocAddressNumAddrs Unsigned32,
|
|
mallocAddressRequestId Unsigned32
|
|
}
|
|
|
|
mallocAddressAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the first address in the allocated block.
|
|
Legal values correspond to the subset of address families
|
|
for which multicast address allocation is supported."
|
|
::= { mallocAddressEntry 1 }
|
|
|
|
mallocAddressFirstAddress OBJECT-TYPE
|
|
SYNTAX InetAddress (SIZE(0..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first address in the allocated block. The type of this
|
|
address is determined by the value of the
|
|
mallocAddressAddressType object."
|
|
::= { mallocAddressEntry 2 }
|
|
|
|
mallocAddressNumAddrs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of addresses in the allocated block."
|
|
::= { mallocAddressEntry 3 }
|
|
|
|
mallocAddressRequestId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of the request which caused this block of
|
|
addresses to be allocated. This value must match the value
|
|
of mallocRequestId for some entry in the
|
|
mallocRequestTable."
|
|
::= { mallocAddressEntry 4 }
|
|
|
|
--
|
|
-- MADCAP-specific objects
|
|
|
|
--
|
|
|
|
madcapConfig OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Group of objects that count various MADCAP events."
|
|
::= { madcap 1 }
|
|
|
|
madcapConfigExtraAllocationTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of extra time on either side of a lease which
|
|
the MADCAP server allocates to allow for clock skew among
|
|
clients."
|
|
::= { madcapConfig 1 }
|
|
|
|
madcapConfigNoResponseDelay OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time the MADCAP client allows for receiving a
|
|
response from a MADCAP server."
|
|
::= { madcapConfig 2 }
|
|
|
|
madcapConfigOfferHold OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time the MADCAP server will reserve an
|
|
address for after sending an OFFER message in anticipation
|
|
of receiving a REQUEST message."
|
|
::= { madcapConfig 3 }
|
|
|
|
madcapConfigResponseCacheInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..300)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time the MADCAP server uses to detect
|
|
duplicate messages."
|
|
::= { madcapConfig 4 }
|
|
|
|
madcapConfigClockSkewAllowance OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The clock skew threshold used by the MADCAP server to
|
|
generate Excessive Clock Skew errors."
|
|
::= { madcapConfig 5 }
|
|
|
|
madcapCounters OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A group of objects that count various MADCAP events."
|
|
::= { madcap 2 }
|
|
|
|
madcapTotalErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of transactions for which the MADCAP
|
|
server has detected an error of any type, regardless of
|
|
whether the server ignored the request or generated a NAK."
|
|
::= { madcapCounters 1 }
|
|
|
|
madcapRequestsDenied OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of valid requests for which the MADCAP server
|
|
could not complete an allocation, regardless of whether NAKs
|
|
were sent. This corresponds to the Valid Request Could Not
|
|
Be Completed error code in MADCAP."
|
|
::= { madcapCounters 2 }
|
|
|
|
madcapInvalidRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of invalid requests received by the MADCAP
|
|
server, regardless of whether NAKs were sent. This
|
|
corresponds to the Invalid Request error code in MADCAP."
|
|
::= { madcapCounters 3 }
|
|
|
|
madcapExcessiveClockSkews OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of requests received by the MADCAP server with
|
|
an excessive clock skew, regardless of whether NAKs were
|
|
sent. This corresponds to the Excessive Clock Skew error
|
|
code in MADCAP."
|
|
::= { madcapCounters 4 }
|
|
|
|
madcapBadLeaseIds OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of requests received by the MADCAP server with
|
|
an unrecognized Lease Identifier, regardless of whether NAKs
|
|
were sent. This corresponds to the Lease Identifier Not
|
|
Recognized error code in MADCAP."
|
|
::= { madcapCounters 5 }
|
|
|
|
madcapDiscovers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of DISCOVER messages received by the MADCAP
|
|
server."
|
|
::= { madcapCounters 6 }
|
|
|
|
madcapInforms OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of INFORM messages received by the MADCAP
|
|
server."
|
|
::= { madcapCounters 7 }
|
|
|
|
madcapRequests OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of REQUEST messages received by the MADCAP
|
|
server."
|
|
::= { madcapCounters 8 }
|
|
|
|
madcapRenews OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RENEW messages received by the MADCAP
|
|
server."
|
|
::= { madcapCounters 9 }
|
|
|
|
madcapReleases OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of RELEASE messages received by the MADCAP
|
|
server."
|
|
::= { madcapCounters 10 }
|
|
|
|
-- conformance information
|
|
|
|
mallocConformance OBJECT IDENTIFIER ::= { mallocMIB 2 }
|
|
mallocCompliances OBJECT IDENTIFIER ::= { mallocConformance 1 }
|
|
mallocGroups OBJECT IDENTIFIER ::= { mallocConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
mallocServerReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for multicast address allocation
|
|
servers implementing the MALLOC MIB without support for
|
|
read-create (i.e., in read-only mode). Such a server can
|
|
then be monitored but can not be configured with this MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mallocBasicGroup,
|
|
mallocServerGroup }
|
|
|
|
OBJECT mallocScopeLastAddress
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeHopLimit
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeDivisible
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeSSM
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeStorage
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeNameScopeName
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeNameDefault
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeNameStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeNameStorage
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeLastAddress
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeLifetime
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeMaxLeaseAddrs
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeMaxLeaseTime
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeStorage
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
GROUP madcapServerGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for servers which implement the
|
|
MADCAP client-server protocol."
|
|
|
|
OBJECT madcapConfigExtraAllocationTime
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT madcapConfigOfferHold
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT madcapConfigResponseCacheInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT madcapConfigClockSkewAllowance
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { mallocCompliances 1 }
|
|
|
|
mallocClientReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for clients implementing the
|
|
MALLOC MIB without support for read-create (i.e., in read-
|
|
only mode). Such clients can then be monitored but can not
|
|
be configured with this MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mallocBasicGroup,
|
|
mallocClientGroup }
|
|
|
|
GROUP mallocClientScopeGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for clients which maintain a list
|
|
of multicast scopes."
|
|
|
|
OBJECT mallocScopeLastAddress
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeHopLimit
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeServerAddressType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeServerAddress
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeSSM
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeStorage
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
GROUP madcapClientGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for clients which implement the
|
|
MADCAP client-server protocol."
|
|
|
|
OBJECT madcapConfigNoResponseDelay
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { mallocCompliances 2 }
|
|
|
|
mallocPrefixCoordinatorReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for prefix coordinators
|
|
implementing the MALLOC MIB without support for read-create
|
|
(i.e., in read-only mode). Such devices can then be
|
|
monitored but can not be configured with this MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mallocBasicGroup,
|
|
mallocPrefixCoordinatorGroup }
|
|
|
|
OBJECT mallocScopeLastAddress
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocScopeDivisible
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeLastAddress
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeStatus
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeLifetime
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeAdvertisable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mallocAllocRangeStorage
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { mallocCompliances 3 }
|
|
|
|
mallocServerFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for multicast address allocation
|
|
servers implementing the MALLOC MIB with support for read-
|
|
create. Such servers can then be both monitored and
|
|
configured with this MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mallocBasicGroup,
|
|
mallocServerGroup }
|
|
|
|
GROUP madcapServerGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for servers which implement the
|
|
MADCAP client-server protocol."
|
|
::= { mallocCompliances 4 }
|
|
|
|
mallocClientFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for hosts implementing the MALLOC
|
|
MIB with support for read-create. Such clients can then be
|
|
both monitored and configured with this MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mallocBasicGroup,
|
|
mallocClientGroup }
|
|
|
|
GROUP mallocClientScopeGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for clients which maintain a list
|
|
of multicast scopes."
|
|
|
|
GROUP madcapClientGroup
|
|
DESCRIPTION
|
|
"This group is mandatory for clients which implement the
|
|
MADCAP client-server protocol."
|
|
::= { mallocCompliances 5 }
|
|
|
|
mallocPrefixCoordinatorFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for prefix coordinators
|
|
implementing the MALLOC MIB with support for read-create.
|
|
Such devices can then be both monitored and configured with
|
|
this MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { mallocBasicGroup,
|
|
mallocPrefixCoordinatorGroup }
|
|
::= { mallocCompliances 6 }
|
|
|
|
-- units of conformance
|
|
|
|
mallocBasicGroup OBJECT-GROUP
|
|
OBJECTS { mallocCapabilities, mallocRequestScopeAddressType,
|
|
mallocRequestScopeFirstAddress,
|
|
mallocRequestStartTime,
|
|
mallocRequestEndTime, mallocRequestNumAddrs,
|
|
mallocRequestState,
|
|
mallocAddressNumAddrs, mallocAddressRequestId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The basic collection of objects providing management of IP
|
|
multicast address allocation."
|
|
::= { mallocGroups 1 }
|
|
|
|
mallocServerGroup OBJECT-GROUP
|
|
OBJECTS { mallocScopeLastAddress, mallocScopeHopLimit,
|
|
mallocScopeSSM, mallocScopeStatus, mallocScopeStorage,
|
|
mallocAllocRangeLastAddress, mallocAllocRangeLifetime,
|
|
mallocAllocRangeNumAllocatedAddrs,
|
|
mallocAllocRangeNumOfferedAddrs,
|
|
mallocAllocRangeNumWaitingAddrs,
|
|
mallocAllocRangeNumTryingAddrs,
|
|
mallocAllocRangeMaxLeaseAddrs,
|
|
mallocAllocRangeMaxLeaseTime, mallocAllocRangeSource,
|
|
mallocAllocRangeStatus, mallocAllocRangeStorage,
|
|
mallocScopeDivisible, mallocScopeSource,
|
|
mallocScopeNameScopeName, mallocScopeNameDefault,
|
|
mallocScopeNameStatus, mallocScopeNameStorage,
|
|
mallocRequestClientAddressType,
|
|
mallocRequestClientAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing management of multicast
|
|
address allocation in servers."
|
|
::= { mallocGroups 2 }
|
|
|
|
mallocClientGroup OBJECT-GROUP
|
|
OBJECTS { mallocRequestServerAddressType,
|
|
mallocRequestServerAddress }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing management of multicast
|
|
address allocation in clients."
|
|
::= { mallocGroups 3 }
|
|
|
|
madcapServerGroup OBJECT-GROUP
|
|
OBJECTS { madcapConfigClockSkewAllowance,
|
|
madcapConfigExtraAllocationTime, madcapConfigOfferHold,
|
|
madcapConfigResponseCacheInterval,
|
|
madcapTotalErrors, madcapRequestsDenied,
|
|
madcapInvalidRequests, madcapBadLeaseIds,
|
|
madcapExcessiveClockSkews, madcapDiscovers,
|
|
madcapInforms, madcapRequests,
|
|
madcapRenews, madcapReleases }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing management of MADCAP
|
|
servers."
|
|
::= { mallocGroups 4 }
|
|
|
|
madcapClientGroup OBJECT-GROUP
|
|
OBJECTS { mallocRequestLeaseIdentifier,
|
|
madcapConfigNoResponseDelay }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing management of MADCAP
|
|
clients."
|
|
::= { mallocGroups 5 }
|
|
|
|
mallocClientScopeGroup OBJECT-GROUP
|
|
OBJECTS { mallocScopeLastAddress, mallocScopeHopLimit,
|
|
mallocScopeStatus, mallocScopeStorage, mallocScopeSource,
|
|
mallocScopeServerAddressType, mallocScopeServerAddress,
|
|
mallocScopeSSM, mallocScopeNameScopeName,
|
|
mallocScopeNameDefault, mallocScopeNameStatus,
|
|
mallocScopeNameStorage }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing management of multicast
|
|
scope information in clients."
|
|
::= { mallocGroups 6 }
|
|
|
|
mallocPrefixCoordinatorGroup OBJECT-GROUP
|
|
OBJECTS { mallocAllocRangeLastAddress, mallocAllocRangeLifetime,
|
|
mallocAllocRangeStatus, mallocAllocRangeStorage,
|
|
mallocAllocRangeSource,
|
|
mallocAllocRangeTotalAllocatedAddrs,
|
|
mallocAllocRangeTotalRequestedAddrs,
|
|
mallocAllocRangeAdvertisable, mallocScopeLastAddress,
|
|
mallocScopeDivisible, mallocScopeSource }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing Prefix Coordinators."
|
|
::= { mallocGroups 7 }
|
|
END
|