1958 lines
70 KiB
Plaintext
1958 lines
70 KiB
Plaintext
G9983-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE,
|
|
mib-2,
|
|
Unsigned32,
|
|
Counter32
|
|
FROM SNMPv2-SMI -- RFC 2578
|
|
TEXTUAL-CONVENTION,
|
|
RowStatus,
|
|
TruthValue
|
|
FROM SNMPv2-TC -- RFC 2579
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP,
|
|
NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- RFC 2580
|
|
ifIndex,
|
|
InterfaceIndex
|
|
FROM IF-MIB -- RFC 2863
|
|
HCPerfCurrentCount,
|
|
HCPerfIntervalCount,
|
|
HCPerfValidIntervals,
|
|
HCPerfInvalidIntervals,
|
|
HCPerfTimeElapsed
|
|
FROM HC-PerfHist-TC-MIB -- RFC 3705
|
|
;
|
|
------------------------------------------------------------------------
|
|
g9983MIB MODULE-IDENTITY
|
|
LAST-UPDATED "201302200000Z" -- 20 February 2013
|
|
ORGANIZATION "IETF ADSL MIB Working Group"
|
|
CONTACT-INFO
|
|
"WG charter:
|
|
http://datatracker.ietf.org/wg/adslmib/charter/
|
|
|
|
Mailing Lists:
|
|
General Discussion: adslmib@ietf.org
|
|
To Subscribe: adslmib-request@ietf.org
|
|
In Body: subscribe your_email_address
|
|
|
|
Chair: Menachem Dodge
|
|
Postal: ECI Telecom, Ltd.
|
|
30 Hasivim St.
|
|
Petach-Tikva 4951169
|
|
Israel
|
|
Phone: +972-3-926-8421
|
|
EMail: menachemdodge1@gmail.com
|
|
|
|
Editor: Edward Beili
|
|
Postal: Actelis Networks, Inc.
|
|
25 Bazel St., P.O.B. 10173
|
|
Petach-Tikva 49103
|
|
Israel
|
|
Phone: +972-3-924-3491
|
|
EMail: edward.beili@actelis.com"
|
|
DESCRIPTION
|
|
"The objects in this MIB module are used to manage the
|
|
multi-pair bonded xDSL interfaces using time-division inverse
|
|
multiplexing (TDIM), as defined in ITU-T Recommendation G.998.3
|
|
(G.Bond/TDIM).
|
|
|
|
This MIB module MUST be used in conjunction with the GBOND-MIB
|
|
module, common to all G.Bond technologies.
|
|
|
|
The following references are used throughout this MIB module:
|
|
|
|
[G.998.3] refers to:
|
|
ITU-T Recommendation G.998.3: 'Multi-pair bonding using
|
|
time-division inverse multiplexing', January 2005.
|
|
|
|
[TR-159] refers to:
|
|
Broadband Forum Technical Report: 'Management Framework for
|
|
xDSL Bonding', December 2008.
|
|
|
|
Naming Conventions:
|
|
BCE - Bonding Channel Entity
|
|
BTU - Bonding Terminating Unit
|
|
BTU-C - Bonding Terminating Unit, CO side
|
|
BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side
|
|
CO - Central Office
|
|
CPE - Customer Premises Equipment
|
|
GBS - Generic Bonding Sub-layer
|
|
GBS-C - Generic Bonding Sub-layer, CO side
|
|
GBS-R - Generic Bonding Sub-layer, Remote Terminal (CPE) side
|
|
SNR - Signal to Noise Ratio
|
|
|
|
Copyright (c) 2013 IETF Trust and the persons identified as
|
|
authors of the code. All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, is permitted pursuant to, and subject to the license
|
|
terms contained in, the Simplified BSD License set forth in Section
|
|
4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
|
|
(http://trustee.ietf.org/license-info)."
|
|
|
|
REVISION "201302200000Z" -- 20 February 2013
|
|
DESCRIPTION "Initial version, published as RFC 6766."
|
|
::= { mib-2 210 }
|
|
|
|
-- Sections of the module
|
|
-- Structured as recommended by RFC 4181, Appendix D
|
|
|
|
g9983Objects OBJECT IDENTIFIER ::= { g9983MIB 1 }
|
|
|
|
g9983Conformance OBJECT IDENTIFIER ::= { g9983MIB 2 }
|
|
|
|
-- Groups in the module
|
|
|
|
g9983Port OBJECT IDENTIFIER ::= { g9983Objects 1 }
|
|
|
|
-- Textual Conventions
|
|
|
|
G9983SvcIndex ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, for each service defined
|
|
in the managed G.Bond/TDIM port.
|
|
It is RECOMMENDED that values be assigned contiguously
|
|
starting from 1. The value for each service MUST remain
|
|
constant at least from one re-initialization of the local
|
|
management subsystem to the next re-initialization."
|
|
SYNTAX Unsigned32 (1..255)
|
|
|
|
G9983SvcIndexList ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "1d:"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This textual convention represents a continuous ordered list of
|
|
all the services defined for the managed G.Bond/TDIM port.
|
|
The value of this object is a concatenation of zero or more (up
|
|
to 60) octets, where each octet contains an 8-bit
|
|
G9983SvcIndex value, identifying a particular service.
|
|
|
|
An octet's position reflects the associated service position
|
|
and its priority in the G.Bond/TDIM frame, with the first octet
|
|
being the first service of highest priority.
|
|
|
|
A zero-length octet string is object-specific and MUST
|
|
therefore be defined as part of the description of any object
|
|
that uses this syntax. Examples of the usage of a zero-length
|
|
value might include situations where an object using this
|
|
textual convention is irrelevant for a specific G.Bond/TDIM port
|
|
type or where no services have been defined for this port."
|
|
SYNTAX OCTET STRING (SIZE (0..60))
|
|
|
|
G9983SvcOrderIndex ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, for each service defined
|
|
in the managed G.Bond/TDIM port, showing its relative position
|
|
inside the G.Bond/TDIM frame."
|
|
SYNTAX Unsigned32 (1..60)
|
|
|
|
-- Port Notifications group
|
|
|
|
g9983PortNotifications OBJECT IDENTIFIER
|
|
::= { g9983Port 0 }
|
|
|
|
g9983SvcUp NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
-- ifIndex and g9983OperSvcPosition would be part of the trap OID
|
|
g9983OperSvcIdx,
|
|
g9983SvcIfIdx
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates that a service, indicated by the
|
|
g9983OperSvcIdx (mapped to a particular interface
|
|
indicated by the g9983SvcIfIdx), in a particular
|
|
G.Bond/TDIM port is passing traffic.
|
|
|
|
This notification is generated (unless disabled or dropped by
|
|
the rate-limiting mechanism) when the g9983OperSvcState
|
|
object has left the 'down' state, while the G.Bond/TDIM port
|
|
state (the ifOperStatus of the IF-MIB) is 'up'.
|
|
|
|
Generation of this notification is controlled by the
|
|
g9983PortConfSvcUpDownEnable object.
|
|
|
|
This object maps to the TR-159 notification nServiceUp."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.5.7"
|
|
::= { g9983PortNotifications 1 }
|
|
|
|
g9983SvcDown NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
-- ifIndex and g9983OperSvcPosition would be part of the trap OID
|
|
g9983OperSvcIdx,
|
|
g9983SvcIfIdx
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates that a service indicated by the
|
|
g9983OperSvcIdx (mapped to a particular interface
|
|
indicated by the g9983SvcIfIdx) in a particular
|
|
G.Bond/TDIM port has stopped passing traffic.
|
|
|
|
This notification is generated (unless disabled or dropped by
|
|
the rate-limiting mechanism), when the g9983OperSvcState
|
|
object has entered the 'down' state, while the G.Bond/TDIM port
|
|
state (the ifOperStatus of the IF-MIB) is 'up'.
|
|
|
|
Generation of this notification is controlled by the
|
|
g9983PortConfSvcUpDownEnable object.
|
|
|
|
This object maps to the TR-159 notification nServiceDown."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.5.8"
|
|
::= { g9983PortNotifications 2 }
|
|
|
|
-- G.Bond/TDIM Port group
|
|
|
|
g9983PortConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983PortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table for configuration of G.Bond/TDIM ports. Entries in
|
|
this table MUST be maintained in a persistent manner."
|
|
::= { g9983Port 1 }
|
|
|
|
g9983PortConfEntry OBJECT-TYPE
|
|
SYNTAX G9983PortConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Port Configuration table.
|
|
Each entry represents a G.Bond/TDIM port indexed by the
|
|
|
|
ifIndex. Additional configuration parameters are available
|
|
via the gBondPortConfEntry of the GBOND-MIB.
|
|
Note that a G.Bond/TDIM port runs on top of a single or
|
|
multiple BCE port(s), which are also indexed by the ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { g9983PortConfTable 1 }
|
|
|
|
G9983PortConfEntry ::=
|
|
SEQUENCE {
|
|
g9983PortConfFecAdminState TruthValue,
|
|
g9983PortConfFecWordSize Unsigned32,
|
|
g9983PortConfFecRedundancySize Unsigned32,
|
|
g9983PortConfFecInterleaverType INTEGER,
|
|
g9983PortConfFecInterleaverDepth Unsigned32,
|
|
g9983PortConfAdminServices G9983SvcIndexList,
|
|
g9983PortConfSvcUpDownEnable TruthValue
|
|
}
|
|
|
|
g9983PortConfFecAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A desired state of the OPTIONAL Forward Error Correction
|
|
(FEC) function of the G.Bond/TDIM port.
|
|
|
|
A value of 'false' indicates that the FEC function SHALL be
|
|
disabled. A value of 'true' indicates that the FEC function
|
|
SHALL be enabled, if supported by the G.Bond/TDIM port, as
|
|
indicated by the g9983PortCapFecSupported object.
|
|
The g9983PortStatFecOperState object indicates the current
|
|
operational state of the FEC function.
|
|
|
|
For the GBS-R ports, the value of this object cannot be changed
|
|
directly. This value may be changed as a result of a write
|
|
operation on the g9983PortCapFecSupported object of a remote
|
|
GBS-C.
|
|
|
|
Modifications of this object MUST be performed when the link
|
|
is 'down'.
|
|
Attempts to change this object MUST be rejected if the link is
|
|
'up' or initializing, or if it is a GBS-R.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute aFECAdminState."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.5; [G.998.3], Appendix II, B-X"
|
|
::= { g9983PortConfEntry 1 }
|
|
|
|
g9983PortConfFecWordSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|20..255)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A FEC code word size, in octets, for G.Bond/TDIM ports
|
|
supporting the FEC function.
|
|
|
|
This object is read-write for the GBS-C ports and read-only
|
|
for the GBS-R.
|
|
|
|
A value of zero SHALL be returned if the FEC function is
|
|
disabled (via g9983PortConfFecAdminState) or not supported.
|
|
|
|
Changing of the FEC code word size MUST be performed when the
|
|
FEC-enabled link is 'down'. Attempts to change this object MUST
|
|
be rejected if the link is 'up' or initializing or if the
|
|
FEC function is disabled/not supported.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute aFECWordSize."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.7; [G.998.3], Appendix II, B-XI"
|
|
::= { g9983PortConfEntry 2 }
|
|
|
|
g9983PortConfFecRedundancySize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|2|4|8|16|20)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A FEC redundancy word size, in octets, for G.Bond/TDIM
|
|
ports supporting the FEC function.
|
|
|
|
This object is read-write for the GBS-C ports and read-only
|
|
for the GBS-R.
|
|
|
|
A value of zero SHALL be returned if the FEC function is
|
|
disabled (via g9983PortConfFecAdminState) or not supported.
|
|
|
|
Changing of the FEC redundancy word size MUST be performed
|
|
when the FEC-enabled link is 'down'. Attempts to change this
|
|
object MUST be rejected if the link is 'up' or initializing or
|
|
if the FEC function is disabled/not supported.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute
|
|
aFECRedundancySize."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.8; [G.998.3], Appendix II, B-XII"
|
|
::= { g9983PortConfEntry 3 }
|
|
|
|
g9983PortConfFecInterleaverType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
block(1),
|
|
convolution(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Interleaver type for G.Bond/TDIM ports supporting the
|
|
FEC function.
|
|
|
|
This object is read-write for the GBS-C ports and read-only
|
|
for the GBS-R.
|
|
|
|
A value of none(0) SHALL be returned if the FEC function is
|
|
disabled (via g9983PortConfFecAdminState) or not supported.
|
|
|
|
Changing of the Interleaver type MUST be performed when the
|
|
FEC-enabled link is 'down'. Attempts to change this object MUST
|
|
be rejected if the link is 'up' or initializing or if the FEC
|
|
function is disabled/not supported.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute
|
|
aFECInterleaverType."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.9; [G.998.3], Appendix II, B-XIII"
|
|
::= { g9983PortConfEntry 4 }
|
|
|
|
g9983PortConfFecInterleaverDepth OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|1|2|3|4|6|8|12|16|24|32|48|96)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Interleaver depth for G.Bond/TDIM ports supporting the
|
|
FEC function.
|
|
|
|
This object is read-write for the GBS-C ports and read-only
|
|
for the GBS-R.
|
|
|
|
A value of zero SHALL be returned if the FEC function is
|
|
disabled (via g9983PortConfFecAdminState) or not supported.
|
|
|
|
Changing of the Interleaver depth MUST be performed when the
|
|
FEC-enabled link is 'down'. Attempts to change this object MUST
|
|
be rejected if the link is 'up' or initializing or if the FEC
|
|
function is disabled/not supported.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute
|
|
aFECInterleaverDepth."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.10; [G.998.3], Appendix II, B-XIV"
|
|
::= { g9983PortConfEntry 5 }
|
|
|
|
g9983PortConfAdminServices OBJECT-TYPE
|
|
SYNTAX G9983SvcIndexList
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Desired list of services for a G.Bond/TDIM port. This object
|
|
is a list of pointers to entries in the g9983SvcTable.
|
|
|
|
The value of this object is a continuous ordered list of up to
|
|
60 indices (g9983SvcIdx) of the active services carried
|
|
via the G.Bond/TDIM link. The position of a service in the
|
|
list determines its relative priority in cases of bandwidth
|
|
degradation -- the priority decreases towards the end of the
|
|
list, which means that the last service in the list would be
|
|
suspended first when the bandwidth degrades.
|
|
|
|
This object is writable and readable for the GBS-C ports.
|
|
It is irrelevant for the GBS-R ports -- a zero-length octet
|
|
string SHALL be returned on an attempt to read this object, and
|
|
an attempt to change this object MUST be rejected in this case.
|
|
|
|
Note that the current operational service list is available
|
|
via the g9983OperSvcTable object.
|
|
|
|
This object for a GBS-C port MAY be modified independently of
|
|
the link's state, i.e., in-service and out-of-service.
|
|
Attempts to set this object to a list with a member value that
|
|
is not the value of the index for an active entry in the
|
|
corresponding g9983SvcTable table MUST be rejected."
|
|
REFERENCE
|
|
"[G.998.3], Sections 10.2.3, 13.3.4.6-13.3.4.11"
|
|
::= { g9983PortConfEntry 6 }
|
|
|
|
g9983PortConfSvcUpDownEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether g9983SvcUp and g9983SvcDown
|
|
notifications should be generated for this interface.
|
|
|
|
A value of true(1) indicates that the notifications are enabled.
|
|
A value of false(2) indicates that the notifications are
|
|
disabled.
|
|
|
|
This object maps to the TR-159 attribute
|
|
aServiceUpDownEnable."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.5.6"
|
|
::= { g9983PortConfEntry 7 }
|
|
|
|
g9983PortCapTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983PortCapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table for capabilities of G.Bond/TDIM ports. Entries in this
|
|
table MUST be maintained in a persistent manner."
|
|
::= { g9983Port 2 }
|
|
|
|
g9983PortCapEntry OBJECT-TYPE
|
|
SYNTAX G9983PortCapEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Port Capability table.
|
|
Each entry represents a G.Bond/TDIM port indexed by the
|
|
ifIndex. Additional capabilities are available via the
|
|
gBondPortCapabilityEntry of the GBOND-MIB.
|
|
Note that a G.Bond/TDIM port runs on top of a single
|
|
or multiple BCE port(s), which are also indexed by the ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { g9983PortCapTable 1 }
|
|
|
|
G9983PortCapEntry ::=
|
|
SEQUENCE {
|
|
g9983PortCapFecSupported TruthValue,
|
|
g9983PortCapFecMaxWordSize Unsigned32,
|
|
g9983PortCapFecMaxRedundancySize Unsigned32,
|
|
g9983PortCapFecInterleaverTypeSupported INTEGER,
|
|
g9983PortCapFecMaxInterleaverDepth Unsigned32
|
|
}
|
|
|
|
g9983PortCapFecSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FEC and Interleaver capability of the G.Bond/TDIM port.
|
|
This object has a value of true(1) when the port supports the
|
|
FEC and Interleaver function.
|
|
A value of false(2) is returned when the port does not
|
|
support the FEC and Interleaver function.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute
|
|
aFECSupported."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.4; [G.998.3], Appendix II, B-VI"
|
|
::= { g9983PortCapEntry 1 }
|
|
|
|
g9983PortCapFecMaxWordSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|20..255)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A maximum supported FEC code word size, in octets, for
|
|
G.Bond/TDIM ports supporting the FEC function.
|
|
|
|
A value of zero SHALL be returned if the FEC function is not
|
|
supported.
|
|
|
|
This object maps to the TR-159 attribute aFECWordSize."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.11; [G.998.3], Appendix II, B-XI"
|
|
::= { g9983PortCapEntry 2 }
|
|
|
|
g9983PortCapFecMaxRedundancySize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|2|4|8|16|20)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A maximum supported FEC redundancy word size, in octets, for
|
|
G.Bond/TDIM ports supporting the FEC function.
|
|
|
|
A value of zero SHALL be returned if the FEC function is not
|
|
supported.
|
|
|
|
This object maps to the TR-159 attribute
|
|
aFECMaxRedundancySize."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.12; [G.998.3], Appendix II, B-XII"
|
|
::= { g9983PortCapEntry 3 }
|
|
|
|
g9983PortCapFecInterleaverTypeSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
block(1),
|
|
convolution(2),
|
|
blockConvolution(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Supported Interleaver types for G.Bond/TDIM ports supporting
|
|
the FEC function.
|
|
|
|
Possible values are:
|
|
none - the port does not support interleaving
|
|
block - the port supports Block Interleaver
|
|
convolution - the port supports Convolution Interleaver
|
|
blockConvolution - the port supports both Block Interleaver
|
|
and Convolution Interleaver
|
|
|
|
This object maps to the TR-159 attribute
|
|
aFECInterleaverTypesSupported."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.13; [G.998.3], Appendix II, B-XIII"
|
|
::= { g9983PortCapEntry 4 }
|
|
|
|
g9983PortCapFecMaxInterleaverDepth OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|1|2|3|4|6|8|12|16|24|32|48|96)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A maximum Interleaver depth for G.Bond/TDIM ports supporting
|
|
the FEC function.
|
|
|
|
A value of zero SHALL be returned if the Interleaver is not
|
|
supported.
|
|
|
|
This object maps to the TR-159 attribute
|
|
aFECMaxInterleaverDepth."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.14; [G.998.3], Appendix II, B-XIV"
|
|
::= { g9983PortCapEntry 5 }
|
|
|
|
g9983PortStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983PortStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides overall status information of G.Bond
|
|
TDIM ports, complementing the generic status information from
|
|
the ifTable of the IF-MIB and the gBondPortStatFltStatus of
|
|
the GBOND-MIB. Additional status information about connected
|
|
BCEs is available from the relevant line MIBs.
|
|
|
|
This table contains live data from the equipment. As such,
|
|
it is NOT persistent."
|
|
::= { g9983Port 3 }
|
|
|
|
g9983PortStatEntry OBJECT-TYPE
|
|
SYNTAX G9983PortStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Port Status table.
|
|
Each entry represents a G.Bond/TDIM port indexed by the
|
|
ifIndex.
|
|
Note that a G.Bond GBS port runs on top of a single
|
|
or multiple BCE port(s), which are also indexed by the ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { g9983PortStatTable 1 }
|
|
|
|
G9983PortStatEntry ::=
|
|
SEQUENCE {
|
|
g9983PortStatFecOperState TruthValue,
|
|
g9983PortStatFltStatus BITS,
|
|
g9983PortStatCrc4Errors Counter32,
|
|
g9983PortStatCrc6Errors Counter32,
|
|
g9983PortStatCrc8Errors Counter32
|
|
}
|
|
|
|
g9983PortStatFecOperState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value indicating the current operational state
|
|
of the OPTIONAL Forward Error Correction (FEC) function for
|
|
the G.998.3 port.
|
|
A value of 'false' indicates that the FEC function is
|
|
disabled. A value of 'true' indicates that the FEC function
|
|
is enabled (and supported).
|
|
|
|
This object maps to the TR-159 attribute aFECOperState."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.6"
|
|
::= { g9983PortStatEntry 1 }
|
|
|
|
g9983PortStatFltStatus OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
serviceDown(0),
|
|
wrongConfig(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"G.Bond/TDIM port fault status. This is a bitmap of possible
|
|
conditions. The various bit positions are:
|
|
serviceDown - at least one of the services defined
|
|
for this aggregation group is down
|
|
(due to low rate).
|
|
wrongConfig - at least one BCE at the remote GBS-R
|
|
is already connected to another GBS.
|
|
|
|
This object is intended to supplement the ifOperStatus object
|
|
in the IF-MIB and the gBondPortStatFltStatus object in the
|
|
GBOND-MIB."
|
|
REFERENCE
|
|
"[G.998.3], Section 6.3; RFC 2863, IF-MIB, ifOperStatus;
|
|
RFC 6765, GBOND-MIB, gBondPortStatFltStatus"
|
|
::= { g9983PortStatEntry 2 }
|
|
|
|
g9983PortStatCrc4Errors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of CRC-4 errors (frame header errors) on all
|
|
pairs in the G.Bond/TDIM port. Simultaneous errors on M lines
|
|
SHOULD be counted M times.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the management system, and at other times
|
|
as indicated by the value of ifCounterDiscontinuityTime as
|
|
defined in the IF-MIB.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute aCRC4Errors."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.1; [G.998.3], Appendix II, B-VII"
|
|
::= { g9983PortStatEntry 3 }
|
|
|
|
g9983PortStatCrc6Errors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of CRC-6 errors (super-frame errors) on all
|
|
pairs in the G.Bond/TDIM port. Simultaneous errors on M lines
|
|
SHOULD be counted 1 time.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the local management subsystem, and at
|
|
other times as indicated by the value of
|
|
ifCounterDiscontinuityTime as defined in the IF-MIB.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute aCRC6Errors."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.2; [G.998.3], Appendix II, B-VIII"
|
|
::= { g9983PortStatEntry 4 }
|
|
|
|
g9983PortStatCrc8Errors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of CRC-8 errors (event/message errors) on all
|
|
pairs in the G.Bond/TDIM port. Simultaneous errors on M lines
|
|
SHOULD be counted M times.
|
|
|
|
Discontinuities in the value of this counter can occur at
|
|
re-initialization of the local management subsystem, and at
|
|
other times as indicated by the value of
|
|
ifCounterDiscontinuityTime as defined in the IF-MIB.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute aCRC8Errors."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.3; [G.998.3], Appendix II, B-IX"
|
|
::= { g9983PortStatEntry 5 }
|
|
|
|
g9983OperSvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983OperSvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of the operational services configured on a G.Bond/TDIM
|
|
port. This table reflects current actual service configuration,
|
|
set by the g9983PortConfAdminServices object. The number of
|
|
entries (services) in this table therefore can vary between
|
|
|
|
0, when no services are configured, and 60, for the maximum
|
|
number of services.
|
|
This table contains live data from the equipment. As such,
|
|
it is NOT persistent."
|
|
::= { g9983Port 4 }
|
|
|
|
g9983OperSvcEntry OBJECT-TYPE
|
|
SYNTAX G9983OperSvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Port Operational Service table,
|
|
containing the index of an active service entry in the
|
|
g9983SvcTable. The entry is indexed by the ifIndex,
|
|
indicating a corresponding G.Bond/TDIM port, and by
|
|
g9983OperSvcPosition (1..60), indicating the
|
|
corresponding service position in the G.Bond/TDIM frame."
|
|
INDEX { ifIndex, g9983OperSvcPosition }
|
|
::= { g9983OperSvcTable 1 }
|
|
|
|
G9983OperSvcEntry ::=
|
|
SEQUENCE {
|
|
g9983OperSvcPosition G9983SvcOrderIndex,
|
|
g9983OperSvcIdx G9983SvcIndex,
|
|
g9983OperSvcState INTEGER
|
|
}
|
|
|
|
g9983OperSvcPosition OBJECT-TYPE
|
|
SYNTAX G9983SvcOrderIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"G.Bond/TDIM operational service position -- a unique index,
|
|
indicating relative placement of the associated service
|
|
pointed to by g9983OperSvcIdx, within the G.Bond/TDIM frame.
|
|
|
|
There can be up to 60 services defined over a TDIM bonded
|
|
facility. Services with lower indices have higher priority in
|
|
cases of bandwidth degradation.
|
|
|
|
The value of g9983OperSvcPosition for the first
|
|
g9983OperSvcEntry is always 1, incrementing sequentially
|
|
for each consecutive entry, i.e., 2 for the second entry,
|
|
3 for the third, etc.
|
|
|
|
This objects maps to the TR-159/G.998.3 attribute aServiceID."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.5.1; [G.998.3], Appendix II, C-I"
|
|
::= { g9983OperSvcEntry 1 }
|
|
|
|
g9983OperSvcIdx OBJECT-TYPE
|
|
SYNTAX G9983SvcIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"G.Bond/TDIM operational service index -- a read-only pointer
|
|
to an existing entry in the g9983SvcTable (value of
|
|
g9983SvcIdx) describing a particular service."
|
|
::= { g9983OperSvcEntry 2 }
|
|
|
|
g9983OperSvcState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"G.Bond/TDIM service operational state.
|
|
|
|
Possible values are:
|
|
up - Service is up and passing traffic.
|
|
down - Service is down, due to a variety of
|
|
reasons, e.g., G.Bond/TDIM port is
|
|
down, current link bandwidth is too
|
|
low to support a particular service,
|
|
etc.
|
|
This objects maps to the TR-159 attribute aServiceOperState."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.5.5"
|
|
::= { g9983OperSvcEntry 3 }
|
|
|
|
g9983SvcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983SvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of possible services for G.Bond/TDIM ports.
|
|
Entries in this table MUST be maintained in a persistent
|
|
manner."
|
|
::= { g9983Port 5 }
|
|
|
|
g9983SvcEntry OBJECT-TYPE
|
|
SYNTAX G9983SvcEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Port Service table, containing
|
|
the management information applicable to a particular service,
|
|
indexed by the g9983SvcIdx, on a G.Bond/TDIM port,
|
|
indexed by the ifIndex."
|
|
INDEX { ifIndex, g9983SvcIdx }
|
|
::= { g9983SvcTable 1 }
|
|
|
|
G9983SvcEntry ::=
|
|
SEQUENCE {
|
|
g9983SvcIdx G9983SvcIndex,
|
|
g9983SvcIfIdx InterfaceIndex,
|
|
g9983SvcType INTEGER,
|
|
g9983SvcSize Unsigned32,
|
|
g9983SvcRowStatus RowStatus
|
|
}
|
|
|
|
g9983SvcIdx OBJECT-TYPE
|
|
SYNTAX G9983SvcIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"G.Bond/TDIM service index -- a unique index associated with
|
|
a particular service entry."
|
|
::= { g9983SvcEntry 1 }
|
|
|
|
g9983SvcIfIdx OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a unique index within the ifTable. It represents
|
|
the interface index of a service to be transmitted over the
|
|
G.Bond/TDIM service instance.
|
|
|
|
This objects maps to the TR-159 attribute aServiceIfIndex."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.5.2"
|
|
::= { g9983SvcEntry 2 }
|
|
|
|
g9983SvcType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ds1(0),
|
|
e1(1),
|
|
nxds0(2),
|
|
nxe0(3),
|
|
ds3(4),
|
|
e3(5),
|
|
clock(6),
|
|
ethernet(7),
|
|
atm(8),
|
|
gfpNoFCS(9),
|
|
gfp(10)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"G.Bond/TDIM service type.
|
|
|
|
Possible values are:
|
|
ds1 - Clear Channel DS1 (synchronous)
|
|
e1 - Clear Channel E1 (synchronous)
|
|
nxds0 - Fractional DS1 (synchronous)
|
|
nxe0 - Fractional E1 (synchronous)
|
|
ds3 - DS3 (synchronous)
|
|
e3 - E3 (synchronous)
|
|
clock - Clock transfer (synchronous)
|
|
ethernet - Ethernet (asynchronous)
|
|
atm - ATM (asynchronous)
|
|
gfpNoFCS - GFP encapsulated without FCS (asynchronous)
|
|
gfp - GFP encapsulated with FCS (asynchronous)
|
|
|
|
For the GBS-R ports, the value of this object cannot be
|
|
changed directly. This value may be changed as a result of a
|
|
write operation on the g9983SvcType object of a remote GBS-C.
|
|
|
|
Attempts to change this object MUST be rejected for the GBS-R
|
|
ports.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute aServiceType."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.5.3; [G.998.3], Appendix II, C-II"
|
|
::= { g9983SvcEntry 3 }
|
|
|
|
g9983SvcSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0|20..255)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service size, in octets, per bonding sub-block for a specific
|
|
service identified by g9983SvcIdx.
|
|
|
|
For TDM (synchronous) services with variable size
|
|
(e.g., fractional DS1/E1), this object represents the number of
|
|
DS0/E0 channels.
|
|
For asynchronous services (Ethernet, ATM, GFPnoFCS, or GFP),
|
|
this object represents the maximum number of octets.
|
|
For non-fractional TDM services (i.e., DS1, E1, DS3, E3, and
|
|
clock), the value of this object MUST be 0.
|
|
|
|
A GET operation returns the current value.
|
|
A SET operation, allowed on GBS-C ports, changes the service
|
|
size to the indicated value. If the service type is a
|
|
fixed-rate synchronous service (g9983SvcType is nxds0, nxe0,
|
|
ds1, e1, ds3, e3, or clock), the operation MUST be rejected.
|
|
|
|
This object maps to the TR-159/G.998.3 attribute aServiceSize."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.5.4; [G.998.3], Appendix II, C-III"
|
|
::= { g9983SvcEntry 4 }
|
|
|
|
g9983SvcRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls the creation, modification, or deletion
|
|
of the associated entry in the g9983SvcTable per the
|
|
semantics of RowStatus.
|
|
|
|
If an 'active' entry is referenced via g9983OperSvcIdx
|
|
or a g9983PortConfAdminServices instance, or indexes a
|
|
g9983SvcPm*Entry, the entry MUST remain 'active'.
|
|
|
|
An 'active' entry SHALL NOT be modified. In order to modify an
|
|
existing entry, it MUST be taken out of service (by setting
|
|
this object to 'notInService'), modified, and set to 'active'
|
|
again."
|
|
::= { g9983SvcEntry 5 }
|
|
|
|
-------------------------------
|
|
-- Performance Monitoring group
|
|
-------------------------------
|
|
|
|
g9983PM OBJECT IDENTIFIER ::= { g9983Port 6 }
|
|
|
|
g9983PortPmCurTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983PortPmCurEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains current Performance Monitoring information
|
|
for a G.Bond/TDIM port. This table contains live data from the
|
|
equipment and as such is NOT persistent."
|
|
::= { g9983PM 1 }
|
|
|
|
g9983PortPmCurEntry OBJECT-TYPE
|
|
SYNTAX G9983PortPmCurEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Port PM table.
|
|
Each entry represents a G.Bond/TDIM port indexed by the
|
|
ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { g9983PortPmCurTable 1 }
|
|
|
|
G9983PortPmCurEntry ::=
|
|
SEQUENCE {
|
|
g9983PortPmCur15MinValidIntervals HCPerfValidIntervals,
|
|
g9983PortPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
|
|
g9983PortPmCur15MinTimeElapsed HCPerfTimeElapsed,
|
|
g9983PortPmCur15MinCrc4s HCPerfCurrentCount,
|
|
g9983PortPmCur15MinCrc6s HCPerfCurrentCount,
|
|
g9983PortPmCur15MinCrc8s HCPerfCurrentCount,
|
|
g9983PortPmCur1DayValidIntervals Unsigned32,
|
|
g9983PortPmCur1DayInvalidIntervals Unsigned32,
|
|
g9983PortPmCur1DayTimeElapsed HCPerfTimeElapsed,
|
|
g9983PortPmCur1DayCrc4s HCPerfCurrentCount,
|
|
g9983PortPmCur1DayCrc6s HCPerfCurrentCount,
|
|
g9983PortPmCur1DayCrc8s HCPerfCurrentCount
|
|
}
|
|
|
|
g9983PortPmCur15MinValidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfValidIntervals
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only number of 15-minute intervals for which the
|
|
performance data was collected. The value of this object will
|
|
be 96 or the maximum number of 15-minute history intervals
|
|
collected by the implementation, unless the measurement was
|
|
(re)started recently, in which case the value will be the
|
|
number of complete 15-minute intervals for which there are at
|
|
least some data.
|
|
|
|
In certain cases, it is possible that some intervals are
|
|
unavailable. In this case, this object reports the maximum
|
|
interval number for which data is available.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf15MinValidIntervals."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.32"
|
|
::= { g9983PortPmCurEntry 1 }
|
|
|
|
g9983PortPmCur15MinInvalidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfInvalidIntervals
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only number of 15-minute intervals for which the
|
|
performance data was not always available. The value will
|
|
typically be zero, except in cases where the data for some
|
|
intervals are not available.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf15MinInvalidIntervals."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.33"
|
|
::= { g9983PortPmCurEntry 2 }
|
|
|
|
g9983PortPmCur15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds that have elapsed since the
|
|
beginning of the current 15-minute performance interval.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerfCurr15MinTimeElapsed."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.34"
|
|
::= { g9983PortPmCurEntry 3 }
|
|
|
|
g9983PortPmCur15MinCrc4s OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-4 errors (frame header errors) on all
|
|
active pairs in the G.Bond/TDIM port during the current
|
|
|
|
15-minute performance interval.
|
|
Simultaneous errors on M lines SHOULD be counted M times.
|
|
|
|
Note that the total number of CRC-4 errors is indicated by the
|
|
g9983PortStatCrc4Errors object.
|
|
|
|
This object is inhibited during Severely Errored Seconds (SES)
|
|
or Unavailable Seconds (UAS)."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.1"
|
|
::= { g9983PortPmCurEntry 4}
|
|
|
|
g9983PortPmCur15MinCrc6s OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-6 errors (super-frame errors) on all
|
|
active pairs in the G.Bond/TDIM port during the current
|
|
15-minute performance interval.
|
|
Simultaneous errors on M lines SHOULD be counted 1 time.
|
|
|
|
Note that the total number of CRC-6 errors is indicated by the
|
|
g9983PortStatCrc6Errors object.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.2"
|
|
::= { g9983PortPmCurEntry 5}
|
|
|
|
g9983PortPmCur15MinCrc8s OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-8 errors (event/message errors) on all
|
|
active pairs in the G.Bond/TDIM port during the current
|
|
15-minute performance interval.
|
|
Simultaneous errors on M lines SHOULD be counted M times.
|
|
|
|
Note that the total number of CRC-8 errors is indicated by the
|
|
g9983PortStatCrc8Errors object.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.4.3"
|
|
::= { g9983PortPmCurEntry 6}
|
|
|
|
g9983PortPmCur1DayValidIntervals OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only number of 1-day intervals for which data was
|
|
collected. The value of this object will be 7 or the maximum
|
|
number of 1-day history intervals collected by the
|
|
implementation, unless the measurement was (re)started recently,
|
|
in which case the value will be the number of complete 1-day
|
|
intervals for which there are at least some data.
|
|
In certain cases, it is possible that some intervals are
|
|
unavailable. In this case, this object reports the maximum
|
|
interval number for which data is available."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.45"
|
|
::= { g9983PortPmCurEntry 7 }
|
|
|
|
g9983PortPmCur1DayInvalidIntervals OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only number of 1-day intervals for which data was
|
|
not always available. The value will typically be zero, except
|
|
in cases where the data for some intervals are not available."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.46"
|
|
::= { g9983PortPmCurEntry 8 }
|
|
|
|
g9983PortPmCur1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds that have elapsed since the
|
|
beginning of the current 1-day performance interval."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.47"
|
|
::= { g9983PortPmCurEntry 9 }
|
|
|
|
g9983PortPmCur1DayCrc4s OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-4 errors on the G.Bond/TDIM port in
|
|
the current 1-day performance interval.
|
|
|
|
This object is inhibited during Severely Errored Seconds (SES)
|
|
and Unavailable Seconds (UAS)."
|
|
::= { g9983PortPmCurEntry 10 }
|
|
|
|
g9983PortPmCur1DayCrc6s OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-6 errors on the G.Bond/TDIM port
|
|
in the current 1-day performance interval.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
::= { g9983PortPmCurEntry 11 }
|
|
|
|
g9983PortPmCur1DayCrc8s OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-8 errors on the G.Bond/TDIM port in
|
|
the current 1-day performance interval.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
::= { g9983PortPmCurEntry 12 }
|
|
|
|
-- Port PM history: 15-min buckets
|
|
|
|
g9983PortPm15MinTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983PortPm15MinEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains historical 15-minute buckets of Performance
|
|
Monitoring information for a G.Bond/TDIM port (a row for each
|
|
15-minute interval, up to 96 intervals).
|
|
Entries in this table MUST be maintained in a persistent manner."
|
|
::= { g9983PM 2 }
|
|
|
|
g9983PortPm15MinEntry OBJECT-TYPE
|
|
SYNTAX G9983PortPm15MinEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Port historical 15-minute PM table.
|
|
Each entry represents Performance Monitoring data for a G.Bond
|
|
TDIM port, indexed by the ifIndex, collected during a particular
|
|
15-minute interval, indexed by the
|
|
g9983PortPm15MinIntervalIndex."
|
|
INDEX { ifIndex, g9983PortPm15MinIntervalIndex }
|
|
::= { g9983PortPm15MinTable 1 }
|
|
|
|
G9983PortPm15MinEntry ::=
|
|
SEQUENCE {
|
|
g9983PortPm15MinIntervalIndex Unsigned32,
|
|
g9983PortPm15MinIntervalMoniTime HCPerfTimeElapsed,
|
|
g9983PortPm15MinIntervalCrc4s HCPerfIntervalCount,
|
|
g9983PortPm15MinIntervalCrc6s HCPerfIntervalCount,
|
|
g9983PortPm15MinIntervalCrc8s HCPerfIntervalCount,
|
|
g9983PortPm15MinIntervalValid TruthValue
|
|
}
|
|
|
|
g9983PortPm15MinIntervalIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data interval number. 1 is the most recent
|
|
previous interval; interval 96 is 24 hours ago.
|
|
Intervals 2..96 are OPTIONAL.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf15MinIntervalNumber."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.57"
|
|
::= { g9983PortPm15MinEntry 1 }
|
|
|
|
g9983PortPm15MinIntervalMoniTime OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds over which the performance data
|
|
was actually monitored. This value will be the same as the
|
|
interval duration (900 seconds), except in a situation where
|
|
performance data could not be collected for any reason."
|
|
::= { g9983PortPm15MinEntry 2 }
|
|
|
|
g9983PortPm15MinIntervalCrc4s OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-4 errors on the G.Bond/TDIM port
|
|
during the 15-minute performance history interval.
|
|
|
|
This object is inhibited during Severely Errored Seconds (SES)
|
|
and Unavailable Seconds (UAS)."
|
|
::= { g9983PortPm15MinEntry 3 }
|
|
|
|
g9983PortPm15MinIntervalCrc6s OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-6 errors on the G.Bond/TDIM port
|
|
during the 15-minute performance history interval.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
::= { g9983PortPm15MinEntry 4 }
|
|
|
|
g9983PortPm15MinIntervalCrc8s OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-8 errors on the G.Bond/TDIM port
|
|
during the current 15-minute performance interval.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
::= { g9983PortPm15MinEntry 5 }
|
|
|
|
g9983PortPm15MinIntervalValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only object indicating whether or not this history
|
|
bucket contains valid data. A valid bucket is reported as
|
|
true(1) and an invalid bucket as false(2).
|
|
If this history bucket is invalid, the BTU-C MUST NOT produce
|
|
notifications based upon the value of the counters in this
|
|
bucket.
|
|
Note that an implementation may decide not to store invalid
|
|
history buckets in its database. In such a case, this object
|
|
is not required, as only valid history buckets are available
|
|
while invalid history buckets are simply not in the database.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf15MinIntervalValid."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.58"
|
|
::= { g9983PortPm15MinEntry 6 }
|
|
|
|
-- Port PM history: 1-day buckets
|
|
|
|
g9983PortPm1DayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983PortPm1DayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains historical 1-day buckets of Performance
|
|
Monitoring information for a G.Bond/TDIM port (a row for each
|
|
1-day interval, up to 7 intervals).
|
|
Entries in this table MUST be maintained in a persistent manner."
|
|
::= { g9983PM 3 }
|
|
|
|
g9983PortPm1DayEntry OBJECT-TYPE
|
|
SYNTAX G9983PortPm1DayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Port historical 1-day PM table.
|
|
Each entry represents Performance Monitoring data for such a
|
|
port, indexed by the ifIndex, collected during a particular
|
|
1-day interval, indexed by the g9983PortPm1DayIntervalIndex."
|
|
INDEX { ifIndex, g9983PortPm1DayIntervalIndex }
|
|
::= { g9983PortPm1DayTable 1 }
|
|
|
|
G9983PortPm1DayEntry ::=
|
|
SEQUENCE {
|
|
g9983PortPm1DayIntervalIndex Unsigned32,
|
|
g9983PortPm1DayIntervalMoniTime HCPerfTimeElapsed,
|
|
g9983PortPm1DayIntervalCrc4s HCPerfIntervalCount,
|
|
g9983PortPm1DayIntervalCrc6s HCPerfIntervalCount,
|
|
g9983PortPm1DayIntervalCrc8s HCPerfIntervalCount,
|
|
g9983PortPm1DayIntervalValid TruthValue
|
|
}
|
|
|
|
g9983PortPm1DayIntervalIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data interval number. 1 is the most recent
|
|
previous interval; interval 7 is 7 days ago.
|
|
|
|
Intervals 2..7 are OPTIONAL.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf1DayIntervalNumber."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.62"
|
|
::= { g9983PortPm1DayEntry 1 }
|
|
|
|
g9983PortPm1DayIntervalMoniTime OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds over which the performance data
|
|
was actually monitored. This value will be the same as the
|
|
interval duration (86400 seconds), except in a situation where
|
|
performance data could not be collected for any reason.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf1DayIntervalMoniSecs."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.64"
|
|
::= { g9983PortPm1DayEntry 2 }
|
|
|
|
g9983PortPm1DayIntervalCrc4s OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-4 errors on the G.Bond/TDIM port
|
|
during the 1-day performance history interval.
|
|
|
|
This object is inhibited during Severely Errored Seconds (SES)
|
|
and Unavailable Seconds (UAS)."
|
|
::= { g9983PortPm1DayEntry 3 }
|
|
|
|
g9983PortPm1DayIntervalCrc6s OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-6 errors on the G.Bond/TDIM port
|
|
during the 1-day performance history interval.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
::= { g9983PortPm1DayEntry 4 }
|
|
|
|
g9983PortPm1DayIntervalCrc8s OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of CRC-8 errors on the G.Bond/TDIM port
|
|
during the current 1-day performance interval.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
::= { g9983PortPm1DayEntry 5 }
|
|
|
|
g9983PortPm1DayIntervalValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only object indicating whether or not this history
|
|
bucket contains valid data. A valid bucket is reported as
|
|
true(1) and an invalid bucket as false(2).
|
|
If this history bucket is invalid, the BTU-C MUST NOT produce
|
|
notifications based upon the value of the counters in this
|
|
bucket.
|
|
Note that an implementation may decide not to store invalid
|
|
history buckets in its database. In such a case, this object
|
|
is not required, as only valid history buckets are available
|
|
while invalid history buckets are simply not in the database.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf1DayIntervalValid."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.63"
|
|
::= { g9983PortPm1DayEntry 6 }
|
|
|
|
-- Services PM
|
|
|
|
g9983SvcPmCurTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983SvcPmCurEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains current Performance Monitoring information
|
|
for the services of a G.Bond/TDIM port.
|
|
This table contains live data from the equipment and as such is
|
|
NOT persistent."
|
|
::= { g9983PM 4 }
|
|
|
|
g9983SvcPmCurEntry OBJECT-TYPE
|
|
SYNTAX G9983SvcPmCurEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Services PM table.
|
|
Each entry represents a service, indexed by the
|
|
g9983SvcIdx, in a G.Bond/TDIM port, indexed by the
|
|
ifIndex."
|
|
INDEX { ifIndex, g9983SvcIdx }
|
|
::= { g9983SvcPmCurTable 1 }
|
|
|
|
G9983SvcPmCurEntry ::=
|
|
SEQUENCE {
|
|
g9983SvcPmCur15MinValidIntervals HCPerfValidIntervals,
|
|
g9983SvcPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
|
|
g9983SvcPmCur15MinTimeElapsed HCPerfTimeElapsed,
|
|
g9983SvcPmCur15MinDowns HCPerfCurrentCount,
|
|
g9983SvcPmCur1DayValidIntervals Unsigned32,
|
|
g9983SvcPmCur1DayInvalidIntervals Unsigned32,
|
|
g9983SvcPmCur1DayTimeElapsed HCPerfTimeElapsed,
|
|
g9983SvcPmCur1DayDowns HCPerfCurrentCount
|
|
}
|
|
|
|
g9983SvcPmCur15MinValidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfValidIntervals
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only number of 15-minute intervals for which the
|
|
performance data was collected. The value of this object will
|
|
be 96 or the maximum number of 15-minute history intervals
|
|
collected by the implementation, unless the measurement was
|
|
(re)started recently, in which case the value will be the
|
|
number of complete 15-minute intervals for which there are at
|
|
least some data.
|
|
In certain cases, it is possible that some intervals are
|
|
unavailable. In this case, this object reports the maximum
|
|
interval number for which data is available.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf15MinValidIntervals."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.32"
|
|
::= { g9983SvcPmCurEntry 1 }
|
|
|
|
g9983SvcPmCur15MinInvalidIntervals OBJECT-TYPE
|
|
SYNTAX HCPerfInvalidIntervals
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only number of 15-minute intervals for which the
|
|
performance data was not always available. The value will
|
|
typically be zero, except in cases where the data for some
|
|
intervals are not available.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf15MinInvalidIntervals."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.33"
|
|
::= { g9983SvcPmCurEntry 2 }
|
|
|
|
g9983SvcPmCur15MinTimeElapsed OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds that have elapsed since the
|
|
beginning of the current 15-minute performance interval.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerfCurr15MinTimeElapsed."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.34"
|
|
::= { g9983SvcPmCurEntry 3 }
|
|
|
|
g9983SvcPmCur15MinDowns OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds in the current 15-minute
|
|
performance interval during which a particular TDIM
|
|
service was 'down', as indicated by the
|
|
g9983OperSvcState object.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
::= { g9983SvcPmCurEntry 4}
|
|
|
|
g9983SvcPmCur1DayValidIntervals OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
UNITS "days"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only number of 1-day performance history intervals for
|
|
which the data was collected. The value of this object will be
|
|
7 or the maximum number of 1-day history intervals collected by
|
|
the implementation, unless the measurement was (re)started
|
|
recently, in which case the value will be the number of complete
|
|
1-day intervals for which there are at least some data.
|
|
In certain cases, it is possible that some intervals are
|
|
unavailable. In this case, this object reports the maximum
|
|
interval number for which data is available."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.45"
|
|
::= { g9983SvcPmCurEntry 5 }
|
|
|
|
g9983SvcPmCur1DayInvalidIntervals OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
UNITS "days"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only number of 1-day performance history intervals for
|
|
which the performance data was not always available. The value
|
|
will typically be zero, except in cases where the data for some
|
|
intervals are not available."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.46"
|
|
::= { g9983SvcPmCurEntry 6 }
|
|
|
|
g9983SvcPmCur1DayTimeElapsed OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds that have elapsed since the
|
|
beginning of the current 1-day performance interval."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.47"
|
|
::= { g9983SvcPmCurEntry 7 }
|
|
|
|
g9983SvcPmCur1DayDowns OBJECT-TYPE
|
|
SYNTAX HCPerfCurrentCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds in the current 1-day performance
|
|
interval during which a particular TDIM service was
|
|
'down', as indicated by the g9983OperSvcState object.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
::= { g9983SvcPmCurEntry 8 }
|
|
|
|
-- Service PM history: 15-min buckets
|
|
|
|
g9983SvcPm15MinTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983SvcPm15MinEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains historical 15-minute buckets of Performance
|
|
Monitoring information for the services of a G.Bond/TDIM port
|
|
(a multi-dimensional row for each 15-minute interval, up to 96
|
|
intervals).
|
|
|
|
Entries in this table MUST be maintained in a persistent manner."
|
|
::= { g9983PM 5 }
|
|
|
|
g9983SvcPm15MinEntry OBJECT-TYPE
|
|
SYNTAX G9983SvcPm15MinEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Service historical 15-minute PM
|
|
table.
|
|
Each entry represents Performance Monitoring data for a
|
|
particular service, indexed by the g9983SvcIdx, in a G.Bond
|
|
TDIM port, indexed by the ifIndex, collected during a particular
|
|
15-minute interval, indexed by the
|
|
g9983SvcPm15MinIntervalIndex."
|
|
INDEX { ifIndex, g9983SvcIdx,
|
|
g9983SvcPm15MinIntervalIndex }
|
|
::= { g9983SvcPm15MinTable 1 }
|
|
|
|
G9983SvcPm15MinEntry ::=
|
|
SEQUENCE {
|
|
g9983SvcPm15MinIntervalIndex Unsigned32,
|
|
g9983SvcPm15MinIntervalMoniTime HCPerfTimeElapsed,
|
|
g9983SvcPm15MinIntervalDowns HCPerfIntervalCount,
|
|
g9983SvcPm15MinIntervalValid TruthValue
|
|
}
|
|
|
|
g9983SvcPm15MinIntervalIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..96)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data interval number. 1 is the most recent
|
|
previous interval; interval 96 is 24 hours ago.
|
|
Intervals 2..96 are OPTIONAL.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf15MinIntervalNumber."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.57"
|
|
::= { g9983SvcPm15MinEntry 1 }
|
|
|
|
g9983SvcPm15MinIntervalMoniTime OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds over which the performance data
|
|
was actually monitored. This value will be the same as the
|
|
interval duration (900 seconds), except in a situation where
|
|
performance data could not be collected for any reason."
|
|
::= { g9983SvcPm15MinEntry 2 }
|
|
|
|
g9983SvcPm15MinIntervalDowns OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds in the 15-minute performance
|
|
history interval during which a particular TDIM service was
|
|
'down', as indicated by the g9983OperSvcState object.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
::= { g9983SvcPm15MinEntry 3 }
|
|
|
|
g9983SvcPm15MinIntervalValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only object indicating whether or not this history
|
|
bucket contains valid data. A valid bucket is reported as
|
|
true(1) and an invalid bucket as false(2).
|
|
|
|
If this history bucket is invalid, the BTU-C MUST NOT produce
|
|
notifications based upon the value of the counters in this
|
|
bucket.
|
|
Note that an implementation may decide not to store invalid
|
|
history buckets in its database. In such a case, this object
|
|
is not required, as only valid history buckets are available
|
|
while invalid history buckets are simply not in the database.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf15MinIntervalValid."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.58"
|
|
::= { g9983SvcPm15MinEntry 4 }
|
|
|
|
-- Service PM history: 1-day buckets
|
|
|
|
g9983SvcPm1DayTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF G9983SvcPm1DayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains historical 1-day buckets of Performance
|
|
Monitoring information for the services of a G.Bond/TDIM port
|
|
(a multi-dimensional row for each 1-day interval, up to 7
|
|
intervals).
|
|
Entries in this table MUST be maintained in a persistent manner."
|
|
::= { g9983PM 6 }
|
|
|
|
g9983SvcPm1DayEntry OBJECT-TYPE
|
|
SYNTAX G9983SvcPm1DayEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the G.Bond/TDIM Service historical 1-day PM table.
|
|
Each entry represents Performance Monitoring data for a
|
|
particular service, indexed by the g9983SvcIdx, defined in a
|
|
G.Bond/TDIM port, indexed by the ifIndex, collected during a
|
|
particular 1-day interval, indexed by the
|
|
g9983SvcPm1DayIntervalIndex."
|
|
INDEX { ifIndex, g9983SvcIdx,
|
|
g9983SvcPm1DayIntervalIndex }
|
|
::= { g9983SvcPm1DayTable 1 }
|
|
|
|
G9983SvcPm1DayEntry ::=
|
|
SEQUENCE {
|
|
g9983SvcPm1DayIntervalIndex Unsigned32,
|
|
g9983SvcPm1DayIntervalMoniTime HCPerfTimeElapsed,
|
|
g9983SvcPm1DayIntervalDowns HCPerfIntervalCount,
|
|
g9983SvcPm1DayIntervalValid TruthValue
|
|
}
|
|
|
|
g9983SvcPm1DayIntervalIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..7)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Performance data interval number. 1 is the most recent
|
|
previous interval; interval 7 is 7 days ago.
|
|
Intervals 2..7 are OPTIONAL.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf1DayIntervalNumber."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.62"
|
|
::= { g9983SvcPm1DayEntry 1 }
|
|
|
|
g9983SvcPm1DayIntervalMoniTime OBJECT-TYPE
|
|
SYNTAX HCPerfTimeElapsed
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds over which the performance data
|
|
was actually monitored. This value will be the same as the
|
|
interval duration (86400 seconds), except in a situation where
|
|
performance data could not be collected for any reason.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf1DayIntervalMoniSecs."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.64"
|
|
::= { g9983SvcPm1DayEntry 2 }
|
|
|
|
g9983SvcPm1DayIntervalDowns OBJECT-TYPE
|
|
SYNTAX HCPerfIntervalCount
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only count of seconds in the 1-day performance history
|
|
interval during which a particular TDIM service was 'down',
|
|
as indicated by the g9983OperSvcState object.
|
|
|
|
This object is inhibited during Unavailable Seconds (UAS)."
|
|
::= { g9983SvcPm1DayEntry 3 }
|
|
|
|
g9983SvcPm1DayIntervalValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only object indicating whether or not this history
|
|
bucket contains valid data. A valid bucket is reported as
|
|
true(1) and an invalid bucket as false(2).
|
|
If this history bucket is invalid, the BTU-C MUST NOT produce
|
|
notifications based upon the value of the counters in this
|
|
bucket.
|
|
Note that an implementation may decide not to store invalid
|
|
history buckets in its database. In such a case, this object
|
|
is not required, as only valid history buckets are available
|
|
while invalid history buckets are simply not in the database.
|
|
|
|
This object partially maps to the TR-159 attribute
|
|
aGroupPerf1DayIntervalValid."
|
|
REFERENCE
|
|
"[TR-159], Section 5.5.1.63"
|
|
::= { g9983SvcPm1DayEntry 4 }
|
|
|
|
--
|
|
-- Conformance Statements
|
|
--
|
|
|
|
g9983Groups OBJECT IDENTIFIER
|
|
::= { g9983Conformance 1 }
|
|
|
|
g9983Compliances OBJECT IDENTIFIER
|
|
::= { g9983Conformance 2 }
|
|
|
|
-- Object Groups
|
|
|
|
g9983BasicGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
g9983PortConfAdminServices,
|
|
g9983PortStatCrc4Errors,
|
|
g9983PortStatCrc6Errors,
|
|
g9983PortStatCrc8Errors,
|
|
g9983PortCapFecSupported,
|
|
g9983OperSvcIdx,
|
|
g9983OperSvcState,
|
|
g9983SvcIfIdx,
|
|
g9983SvcType,
|
|
g9983SvcSize,
|
|
g9983SvcRowStatus,
|
|
g9983PortStatFltStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects representing management information
|
|
for G.Bond/TDIM ports."
|
|
::= { g9983Groups 1 }
|
|
|
|
g9983FecGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
g9983PortCapFecSupported,
|
|
g9983PortConfFecAdminState,
|
|
g9983PortStatFecOperState,
|
|
g9983PortConfFecWordSize,
|
|
g9983PortConfFecRedundancySize,
|
|
g9983PortConfFecInterleaverType,
|
|
g9983PortConfFecInterleaverDepth,
|
|
g9983PortCapFecMaxWordSize,
|
|
g9983PortCapFecMaxRedundancySize,
|
|
g9983PortCapFecInterleaverTypeSupported,
|
|
g9983PortCapFecMaxInterleaverDepth
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects supporting the OPTIONAL Forward Error
|
|
Correction (FEC) and Interleaver function in G.Bond/TDIM
|
|
ports."
|
|
::= { g9983Groups 2 }
|
|
|
|
g9983AlarmConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
g9983PortConfSvcUpDownEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects required for configuration of alarm
|
|
thresholds and notifications in G.Bond/TDIM ports."
|
|
::= { g9983Groups 3 }
|
|
|
|
g9983NotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
g9983SvcUp,
|
|
g9983SvcDown
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This group supports notifications of significant conditions
|
|
associated with G.Bond/TDIM ports."
|
|
::= { g9983Groups 4 }
|
|
|
|
g9983PerfCurrGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
g9983PortPmCur15MinValidIntervals,
|
|
g9983PortPmCur15MinInvalidIntervals,
|
|
g9983PortPmCur15MinTimeElapsed,
|
|
g9983PortPmCur15MinCrc4s,
|
|
g9983PortPmCur15MinCrc6s,
|
|
g9983PortPmCur15MinCrc8s,
|
|
g9983PortPmCur1DayValidIntervals,
|
|
g9983PortPmCur1DayInvalidIntervals,
|
|
g9983PortPmCur1DayTimeElapsed,
|
|
g9983PortPmCur1DayCrc4s,
|
|
g9983PortPmCur1DayCrc6s,
|
|
g9983PortPmCur1DayCrc8s,
|
|
g9983SvcPmCur15MinValidIntervals,
|
|
g9983SvcPmCur15MinInvalidIntervals,
|
|
g9983SvcPmCur15MinTimeElapsed,
|
|
g9983SvcPmCur15MinDowns,
|
|
g9983SvcPmCur1DayValidIntervals,
|
|
g9983SvcPmCur1DayInvalidIntervals,
|
|
g9983SvcPmCur1DayTimeElapsed,
|
|
g9983SvcPmCur1DayDowns
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects supporting OPTIONAL current Performance
|
|
Monitoring information for G.Bond/TDIM ports."
|
|
::= { g9983Groups 5 }
|
|
|
|
g9983Perf15MinGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
g9983PortPm15MinIntervalMoniTime,
|
|
g9983PortPm15MinIntervalCrc4s,
|
|
g9983PortPm15MinIntervalCrc6s,
|
|
g9983PortPm15MinIntervalCrc8s,
|
|
g9983PortPm15MinIntervalValid,
|
|
g9983SvcPm15MinIntervalMoniTime,
|
|
g9983SvcPm15MinIntervalDowns,
|
|
g9983SvcPm15MinIntervalValid
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects supporting OPTIONAL historical
|
|
Performance Monitoring information for G.Bond/TDIM ports, during
|
|
previous 15-minute intervals."
|
|
::= { g9983Groups 6 }
|
|
|
|
g9983Perf1DayGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
g9983PortPm1DayIntervalMoniTime,
|
|
g9983PortPm1DayIntervalCrc4s,
|
|
g9983PortPm1DayIntervalCrc6s,
|
|
g9983PortPm1DayIntervalCrc8s,
|
|
g9983PortPm1DayIntervalValid,
|
|
g9983SvcPm1DayIntervalMoniTime,
|
|
g9983SvcPm1DayIntervalDowns,
|
|
g9983SvcPm1DayIntervalValid
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects supporting OPTIONAL historical
|
|
Performance Monitoring information for G.Bond/TDIM ports, during
|
|
previous 1-day intervals."
|
|
::= { g9983Groups 7 }
|
|
|
|
-- Compliance Statements
|
|
|
|
g9983Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for G.Bond/TDIM interfaces.
|
|
Compliance with the following external compliance statements
|
|
is REQUIRED:
|
|
|
|
MIB Module Compliance Statement
|
|
---------- --------------------
|
|
IF-MIB ifCompliance3
|
|
GBOND-MIB gBondCompliance"
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
g9983BasicGroup,
|
|
g9983AlarmConfGroup,
|
|
g9983NotificationGroup
|
|
}
|
|
|
|
GROUP g9983FecGroup
|
|
DESCRIPTION
|
|
"Support for this group is only required for implementations
|
|
supporting the G.Bond/TDIM FEC and Interleaver function."
|
|
|
|
GROUP g9983PerfCurrGroup
|
|
DESCRIPTION
|
|
"Support for this group is only required for implementations
|
|
supporting Performance Monitoring."
|
|
|
|
GROUP g9983Perf15MinGroup
|
|
DESCRIPTION
|
|
"Support for this group is only required for implementations
|
|
supporting historical Performance Monitoring."
|
|
|
|
GROUP g9983Perf1DayGroup
|
|
DESCRIPTION
|
|
"Support for this group is only required for implementations
|
|
supporting historical Performance Monitoring."
|
|
::= { g9983Compliances 1 }
|
|
END
|