WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/rfc/DOCS-QOS3-MIB

5561 lines
213 KiB
Plaintext
Raw Blame History

DOCS-QOS3-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Counter32,
Counter64,
enterprises
FROM SNMPv2-SMI -- RFC 2578
TEXTUAL-CONVENTION,
RowStatus,
TruthValue,
MacAddress,
TimeStamp,
StorageType
FROM SNMPv2-TC -- RFC 2579
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF -- RFC 2580
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC 3411
InterfaceIndex,
ifIndex
FROM IF-MIB -- RFC 2863
InetAddressType,
InetAddress,
InetPortNumber
FROM INET-ADDRESS-MIB
-- Closed by TI for CM MIB compilation.
-- DscpOrAny
-- FROM DIFFSERV-DSCP-TC
-- DocsL2vpnIfList
-- FROM DOCS-L2VPN-MIB
AttributeMask,
AttrAggrRuleMask,
ChSetId,
Dsid,
ChId,
ChannelList
FROM DOCS-IF3-MIB;
-- Replaced by TI with direct OBJECT IDENTIFIER definitions.
-- clabProjDocsis
-- FROM CLAB-DEF-MIB;
cableLabs OBJECT IDENTIFIER ::= { enterprises 4491 }
clabProject OBJECT IDENTIFIER ::= { cableLabs 2 }
clabProjDocsis OBJECT IDENTIFIER ::= { clabProject 1 }
docsQosMib MODULE-IDENTITY
LAST-UPDATED "201112210000Z" -- Decemer 21, 2012
ORGANIZATION "Cable Television Laboratories, Inc."
CONTACT-INFO
"Postal: Cable Television Laboratories, Inc.
858 Coal Creek Circle
Louisville, Colorado 80027-9750
U.S.A.
Phone: +1 303-661-9100
Fax: +1 303-661-9199
E-mail: mibs@cablelabs.com"
DESCRIPTION
"This MIB module contains the management objects for the
management of QOS for channel bonding."
REVISION "201112210000Z" -- Decemer 21, 2012
DESCRIPTION
"Revised Version includes ECN OSSIv3.0-N-07.0480-3
and published as I04"
REVISION "200705180000Z" -- May 18, 2007
DESCRIPTION
"Revised Version includes ECNs
OSSIv3.0-N-07.0445-3
OSSIv3.0-N-07.0437-4
OSSIv3.0-N-07.0412-2
OSSIv3.0-N-07.0410-4
and published as I03"
REVISION "200612071700Z" -- Dec 7, 2006
DESCRIPTION
"Initial version, published as part of the CableLabs
OSSIv3.0 specification CM-SP-OSSIv3.0-I01-061207
Copyright 1999-2007 Cable Television Laboratories, Inc.
All rights reserved."
::= { clabProjDocsis 21 }
-- Textual Conventions
-- Textual Conventions
-- DocsL2vpnIfList textual conventions insertet by TI directly
-- from DOCS-L2VPN-MIB for CM MIB compilation.
DocsL2vpnIfList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A object of this type indicates a set of CM
MAC bridge interfaces, encoded as a BITS syntax with a ?1?
Bit for each interface included in the set.
Bit position eCM(0) represents a conceptual interface to
the internal 'self' host MAC of the eCM itself. All other
bit positions K correspond to CM MAC bridge port interface
index with ifIndex value K.
A BITS object is encoded as an OCTET STRING, which may have
length zero. Bit position 0 is encoded in the most
significant bit of the first octet, proceeding to
bit position 7 in the least significant bit. Bit position 8
is encoded in the most significant bit of the second octet,
and so on.
In a CM, ifIndex value 1 corresponds to the primary CPE
interface. In CableHome devices, this interface is assigned
to the embedded Portal Services (ePS) host interface, which
provides a portal to the primary physical CPE interface.
In many contexts of a DocsL2VpnIfList, a '1' in bit
position 1 corresponds to 'any' or 'all' CPE interfaces
when the CM contains more than one CPE interface.
ifIndex value 2 corresponds to the docsCableMacLayer
RF MAC interface.
ifIndex values 3 and 4 correspond to the
docsCableDownstream and docsCableUpstream interfaces,
respectively, which are not separate MAC bridge port
interfaces. Bit positions 3 and 4 are unused in this type;
they must be saved and reported as configured, but
otherwise ignored.
ifIndex values 5 through 15 are reserved for individual
CPE interfaces for devices that implement more than one
CPE interface. In such devices, DocsL2vpnIfList bit
position 1 corresponds to the set of all CPE interfaces.
A CM with more than one CPE interface MAY assign a
DocsL2vpnIfList bit position within the range of 5..15 to
refer to the single primary CPE interface.
ifIndex value 16 is assigned to any embedded Multimedia
Terminal Adapter (eMTA) as defined by PacketCable.
ifIndex value 17 is assigned to the IP management host
interface of an embedded Set Top Box (eSTB). ifIndex value
18 is reserved for the DOCSIS Set-top Gateway (DSG) traffic
delivered to an eSTB.
ifIndex values 19 through 31 are
reserved for future defined embedded Service Application."
SYNTAX BITS {
eCm(0),
cmci(1),
docsCableMacLayer(2),
docsCableDownstream(3),
docsCableUpstream(4),
-- 5..15 reserved for other CPE interfaces
-- Inserted by TI for CM MIB compilation
tistub5(5),
tistub6(6),
tistub7(7),
tistub8(8),
tistub9(9),
tistub10(10),
tistub11(11),
tistub12(12),
tistub13(13),
tistub14(14),
tistub15(15),
eMta(16),
eStbIp(17),
eStbDsg(18)
-- 19..31 reserved for other eSAFE interfaces
}
IfDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates a direction on an RF MAC interface.
The value downstream(1) is from Cable Modem
Termination System to Cable Modem.
The value upstream(2) is from Cable Modem to
Cable Modem Termination System."
SYNTAX INTEGER {
downstream(1),
upstream(2)
}
BitRate ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The rate of traffic in unit of bits per second.
Used to specify traffic rate for QOS."
SYNTAX Unsigned32
SchedulingType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The scheduling service provided by a CMTS for an
upstream Service Flow. If the parameter is omitted
from an upstream QOS Parameter Set, this object
takes the value of bestEffort (2). This parameter
must be reported as undefined (1) for downstream
QOS Parameter Sets."
SYNTAX INTEGER {
undefined (1),
bestEffort (2),
nonRealTimePollingService(3),
realTimePollingService(4),
unsolictedGrantServiceWithAD(5),
unsolictedGrantService(6)
}
docsQosMibObjects OBJECT IDENTIFIER ::= { docsQosMib 1 }
docsQosPktClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosPktClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes the packet classification
configured on the CM or CMTS.
The model is that a packet either received as input from
an interface or transmitted for output on an interface
may be compared against an ordered list of rules
pertaining to the packet contents. Each rule is an instance
of this object. A matching rule provides a Service
Flow ID to which the packet is classified.
All rules need to match for a packet to match a classifier.
The attibutes in this row correspond to a set of Classifier
Encoding parameters in a DOCSIS MAC management
message. The BitMap attribute indicates which particular
parameters were present in the classifier as
signaled in the DOCSIS message.
If the referenced parameter was not present in the signaled
Classifier, the corresponding attribute in
this instance reports a value as specified by that attribute
description."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flows and
Classifiers section."
::= { docsQosMibObjects 1}
docsQosPktClassEntry OBJECT-TYPE
SYNTAX DocsQosPktClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosPktClassTable.
The ifIndex key corresponds to the MAC Domain interface
of the service flow of this classifier."
INDEX { ifIndex,docsQosServiceFlowId,docsQosPktClassId }
::= { docsQosPktClassTable 1 }
DocsQosPktClassEntry ::= SEQUENCE {
docsQosPktClassId
Unsigned32,
docsQosPktClassDirection
IfDirection,
docsQosPktClassPriority
Unsigned32,
docsQosPktClassIpTosLow
OCTET STRING,
docsQosPktClassIpTosHigh
OCTET STRING,
docsQosPktClassIpTosMask
OCTET STRING,
docsQosPktClassIpProtocol
Unsigned32,
docsQosPktClassIpSourceAddr
InetAddress,
docsQosPktClassIpSourceMask
InetAddress,
docsQosPktClassIpDestAddr
InetAddress,
docsQosPktClassIpDestMask
InetAddress,
docsQosPktClassSourcePortStart
InetPortNumber,
docsQosPktClassSourcePortEnd
InetPortNumber,
docsQosPktClassDestPortStart
InetPortNumber,
docsQosPktClassDestPortEnd
InetPortNumber,
docsQosPktClassDestMacAddr
MacAddress,
docsQosPktClassDestMacMask
MacAddress,
docsQosPktClassSourceMacAddr
MacAddress,
docsQosPktClassEnetProtocolType
INTEGER,
docsQosPktClassEnetProtocol
Unsigned32,
docsQosPktClassUserPriLow
Unsigned32,
docsQosPktClassUserPriHigh
Unsigned32,
docsQosPktClassVlanId
Unsigned32,
docsQosPktClassState
INTEGER,
docsQosPktClassPkts
Counter64,
docsQosPktClassBitMap
BITS,
docsQosPktClassIpAddrType
InetAddressType,
docsQosPktClassFlowLabel
Unsigned32,
docsQosPktClassCmInterfaceMask
DocsL2vpnIfList,
docsQosPktClassIcmpTypeLow
Unsigned32,
docsQosPktClassIcmpTypeHigh
Unsigned32
}
docsQosPktClassId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key indicates the assigned identifier to the
packet classifier instance by the CMTS, which is unique
per Service Flow.
For UDCs this corresponds to the Service Flow Reference
of the classifier."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Classifier
Identifier section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 1 }
docsQosPktClassDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the direction to which the
classifier is applied."
::= { docsQosPktClassEntry 2 }
docsQosPktClassPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the order of evaluation
of the classifiers.
The higher the value, the higher the priority.
The value of 0 is used as default in provisioned Service
Flows Classifiers.
The default value of 64 is used for dynamic Service Flow
Classifiers.
If the referenced parameter is not present in a classifier,
this attribute reports the default
value as defined above."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Rule Priority
section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsQosPktClassEntry 3 }
docsQosPktClassIpTosLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the low value of a range of
TOS byte values.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 0.
The IP TOS octet, as originally defined in RFC 791, has
been superseded by the 6-bit Differentiated Services
Field (DSField, RFC 3260) and the 2-bit Explicit
Congestion Notification Field (ECN field, RFC 3168).
This object is defined as an 8-bit octet as per the DOCSIS
Specification for packet classification."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Type of
Service Range and Mask and IPv6 Traffic Class Range and
Mask sections in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 4 }
docsQosPktClassIpTosHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the 8-bit high value of a
range of TOS byte values.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 0.
The IP TOS octet as originally defined in RFC 791 has been
superseded by the 6-bit Differentiated Services
Field (DSField, RFC 3260) and the 2-bit Explicit Congestion
Notification Field (ECN field, RFC 3168).
This object is defined as an 8-bit octet as defined by
the DOCSIS Specification for packet classification."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Type of
Service Range and Mask and IPv6 Traffic Class Range and
Mask sections in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 5 }
docsQosPktClassIpTosMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the mask value is bitwise
ANDed with TOS byte in an IP packet, and this value is
used for range checking of TosLow and TosHigh.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 0.
The IP TOS octet as originally defined in RFC 791 has been
superseded by the 6-bit Differentiated Services
Field (DSField, RFC 3260) and the 2-bit Explicit Congestion
Notification Field (ECN field, RFC 3168).
This object is defined as an 8-bit octet per the DOCSIS
Specification for packet classification."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Type of
Service Range and Mask and IPv6 Traffic Class Range and
Mask sections in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 6 }
docsQosPktClassIpProtocol OBJECT-TYPE
SYNTAX Unsigned32 (0..258)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the value of the IP Protocol
field required for IP packets to match this rule.
The value 256 matches traffic with any IP Protocol value.
The value 257 by convention matches both TCP and
UDP.
If the referenced parameter is not present in a classifier,
this attibute reports the value of 258."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IP Protocol and
IPv6 Next Header Type sections in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosPktClassEntry 7 }
docsQosPktClassIpSourceAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the value of the IP Source
Address required for packets to match this rule.
An IP packet matches the rule when the packet IP Source
Address bitwise ANDed with the InetSourceMask value
equals the InetSourceAddr value.
The address type of this object is specified by InetAddressType.
If the referenced parameter is not present in a classifier,
this object reports the value of '00000000'H."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Source Address
and IPv6 Source Address sections in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosPktClassEntry 8 }
docsQosPktClassIpSourceMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies which bits of a packet's
IP Source Address are compared to match this rule.
An IP packet matches the rule when the packet source address
bitwise ANDed with the InetSourceMask value
equals the docsIetfQosIpPktClassInetSourceAddr
value.
The address type of this attribute is specified by InetAddressType.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 'FFFFFFFF'H."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Source Mask
and IPv6 Source Prefix Length (bits) sections in the Common Radio
Frequency Interface Encodings Annex."
::= { docsQosPktClassEntry 9 }
docsQosPktClassIpDestAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the value of the IP Destination
Address required for packets to match this rule.
An IP packet matches the rule when the packet IP Destination
Address bitwise ANDed with the InetDestMask
value equals the InetDestAddr value.
The address type of this attribute is specified by
InetAddressType.
If the referenced parameter is not present in a classifier,
this attribute reports the value of '00000000'H."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Destination
Address and IPv6 Destination Address sections in the Common
Radio Frequency Interface Encodings Annex."
::= { docsQosPktClassEntry 10 }
docsQosPktClassIpDestMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies which bits of a packet's
IP Destination Address are compared to match this rule.
An IP packet matches the rule when the packet destination
address bitwise ANDed with the InetDestMask value
equals the docsIetfQosIpPktClassInetDestAddr
value.
The address type of this attribute is specified by InetAddressType.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 'FFFFFFFF'H."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IPv4 Destination
Mask and IPv6 Destination Prefix Length (bits) sections in
the Common Radio Frequency Interface Encodings Annex."
::= { docsQosPktClassEntry 11 }
docsQosPktClassSourcePortStart OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the low-end inclusive range
of TCP/UDP source port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, TCP/UDP Source
Port Start section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 12 }
docsQosPktClassSourcePortEnd OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the high-end inclusive
range of TCP/UDP source port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 65535."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, TCP/UDP Source
Port End section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 13 }
docsQosPktClassDestPortStart OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the low-end inclusive range
of TCP/UDP destination port numbers to which a packet
is compared.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, TCP/UDP
Destination Port Start section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosPktClassEntry 14 }
docsQosPktClassDestPortEnd OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the high-end inclusive
range of TCP/UDP destination port numbers to which a
packet is compared.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 65535."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, TCP/UDP Destination
Port End section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 15 }
docsQosPktClassDestMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Ethernet packet matches an entry when its destination
MAC address bitwise ANDed with DestMacMask equals
the value of DestMacAddr.
If the referenced parameter is not present in a classifier,
this attribute reports the value of '000000000000'H."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Destination MAC
Address section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 16 }
docsQosPktClassDestMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Ethernet packet matches an entry when its destination
MAC address bitwise ANDed with DestMacMask equals
the value of DestMacAddr.
If the referenced parameter is not present in a classifier,
this attribute reports the value of '000000000000'H."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Destination
MAC Address section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 17 }
docsQosPktClassSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An Ethernet packet matches this entry when its source
MAC address equals the value of this attribute.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 'FFFFFFFFFFFF'"
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Source MAC
Address section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 18 }
docsQosPktClassEnetProtocolType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethertype(1),
dsap(2),
mac(3),
all(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the format of the layer 3
protocol ID in the Ethernet packet. A value of 'none'
means that the rule does not use the layer 3 protocol type
as a matching criteria.
A value of 'ethertype' means that the rule applies only
to frames that contain an EtherType value. Ethertype
values are contained in packets using the Dec-Intel-Xerox
(DIX) encapsulation or the RFC1042 Sub-Network
Access Protocol (SNAP) encapsulation formats.
A value of 'dsap' means that the rule applies only to frames
using the IEEE802.3 encapsulation format with
a Destination Service Access Point (DSAP) other than
0xAA (which is reserved for SNAP).
A value of 'mac' means that the rule applies only to MAC
management messages for MAC management messages.
A value of 'all' means that the rule matches all Ethernet
packets.
If the Ethernet frame contains an 802.1P/Q Tag header
(i.e., EtherType 0x8100), this attribute applies
to the embedded EtherType field within the 802.1P/Q
header.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803,
Ethertype/DSAP/MacType section in the Common Radio
Frequency Interface Encodings Annex."
::= { docsQosPktClassEntry 19 }
docsQosPktClassEnetProtocol OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If EnetProtocolType is 'none', this attribute is
ignored when considering whether a packet matches the
current rule.
If EnetProtocolType is 'ethertype', this attribute
gives the 16-bit value of the EtherType that the packet
must match in order to match the rule.
If EnetProtocolType is 'dsap', the lower 8 bits of this
attribute's value must match the DSAP byte of the packet
in order to match the rule.
If EnetProtocolType is 'mac', the lower 8 bits of this
attribute's value represent a
lower bound (inclusive) of MAC management message type
codes matched, and the upper 8 bits represent the
upper bound (inclusive) of matched MAC message type
codes. Certain message type codes are excluded from
matching, as specified in the reference.
If the Ethernet frame contains an 802.1P/Q Tag header
(i.e., EtherType 0x8100), this attribute applies
to the embedded EtherType field within the 802.1P/Q
header.
If the referenced parameter is not present in the classifier,
the value of this attribute is reported as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803,
Ethertype/DSAP/MacType section in the Common Radio
Frequency Interface Encodings Annex."
::= { docsQosPktClassEntry 20 }
docsQosPktClassUserPriLow OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute applies only to Ethernet frames using
the 802.1P/Q tag header (indicated with EtherType
0x8100). Such frames include a 16-bit Tag that contains
a 3-bit Priority field and a 12-bit VLAN number.
Tagged Ethernet packets must have a 3-bit Priority field
within the range of PriLow to PriHigh in order to
match this rule.
If the referenced parameter is not present in the classifier,
the value of this attribute is reported as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IEEE 802.1P
User_Priority section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 22 }
docsQosPktClassUserPriHigh OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute applies only to Ethernet frames using
the 802.1P/Qtag header (indicated with EtherType
0x8100). Such frames include a 16-bit Tag that contains
a 3-bit Priority field and a 12-bit VLAN number.
Tagged Ethernet packets must have a 3-bit Priority field
within the range of PriLow to
PriHigh in order to match this rule.
If the referenced parameter is not present in the classifier,
the value of this attribute is reported as 7."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IEEE 802.1P
User_Priority section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 23 }
docsQosPktClassVlanId OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute applies only to Ethernet frames
using the 802.1P/Q tag header.
Tagged packets must have a VLAN Identifier that matches
the value in order to match the rule.
If the referenced parameter is not present in the classifier,
the value of this attribute is reported as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IEEE 802.1Q VLAN_ID
section in the Common Radio Frequency Interface Encodings Annex."
::= { docsQosPktClassEntry 24 }
docsQosPktClassState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates whether or not the classifier
is enabled to classify packets to a Service Flow.
If the referenced parameter is not present in the classifier,
the value of this attribute is reported as 'true'."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Classifier
Activation State section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPktClassEntry 25 }
docsQosPktClassPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the number of packets that have
been classified using this entry. This includes
all packets delivered to a Service Flow maximum rate
policing function, whether or not that function drops
the packets.
This counter's last discontinuity is the
ifCounterDiscontinuityTime for the same ifIndex that
indexes this attribute."
::= { docsQosPktClassEntry 26 }
docsQosPktClassBitMap OBJECT-TYPE
SYNTAX BITS {
rulePriority(0),
activationState(1),
ipTos(2),
ipProtocol(3),
ipSourceAddr(4),
ipSourceMask(5),
ipDestAddr(6),
ipDestMask(7),
sourcePortStart(8),
sourcePortEnd(9),
destPortStart(10),
destPortEnd(11),
destMac(12),
sourceMac(13),
ethertype(14),
userPri(15),
vlanId(16),
flowLabel(17),
cmInterfaceMask(18)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates which parameter encodings
were actually present in the DOCSIS packet classifier
encoding signaled in the DOCSIS message that created
or modified the classifier. Note that Dynamic
Service Change messages have replace semantics, so
that all non-default parameters must be present whether
the classifier is being created or changed.
A bit of this attribute is set to 1 if the parameter indicated
by the comment was present in the classifier encoding,
and to 0 otherwise.
Note that BITS are encoded most significant bit first,
so that if, for example, bits 6 and 7 are set, this attribute
is encoded as the octet string '030000'H."
::= { docsQosPktClassEntry 27 }
docsQosPktClassIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the type of the Internet
address for InetSourceAddr, InetSourceMask, InetDestAddr,
and InetDestMask.
If the referenced parameter is not present in a classifier,
this object reports the value of 'ipv4'."
::= { docsQosPktClassEntry 28 }
docsQosPktClassFlowLabel OBJECT-TYPE
SYNTAX Unsigned32 (0..1048575)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the Flow Label field in
the IPv6 header to be matched by the classifier.
The value zero indicates that the Flow Label is not specified
as part of the classifier and is not matched against
the packets."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IPv6 Flow Label
section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsQosPktClassEntry 29 }
docsQosPktClassCmInterfaceMask OBJECT-TYPE
SYNTAX DocsL2vpnIfList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents a bit-mask of the CM in-bound
interfaces to which this classifer applies.
This attribute only applies to QOS upstream Classifiers
and upstream Drop Classifiers. For QOS downstream
classifiers this object reports the zero-length
string."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, CM Interface
Mask (CMIM) Encoding section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosPktClassEntry 30 }
docsQosPktClassIcmpTypeLow OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the low-end inclusive range of the
ICMP type numbers to which a packet is compared. If the
referenced parameter is not present in a classifier, this
attribute reports the value of 255."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I17-111711, TypeLow
encodings section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosPktClassEntry 31 }
docsQosPktClassIcmpTypeHigh OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the high-end inclusive range of the
ICMP type numbers to which a packet is compared. If the
referenced parameter is not present in a classifier, this
attribute reports the value of 255."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I17-111711, TypeLow
encodings section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosPktClassEntry 32 }
docsQosParamSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosParamSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes the set of QOS parameters defined
in a managed device.
DOCSIS 1.0 COS service profiles are not represented
in this object.
Each row corresponds to a DOCSIS QOS Parameter Set as
signaled via DOCSIS MAC management messages.Each attribute
of an instance of this object corresponds to
one or part of oneService Flow Encoding.
The BitMap attribute indicates which particular parameters
were signaled in the original registration
or dynamic service request message that created the
QOS Parameter Set.
In many cases, even if a QOS Parameter Set parameter was
not signaled, the DOCSIS specification calls for
a default value to be used. That default value is reported
as the value of the corresponding attribute in this
object instance.
Many attributes are not applicable, depending on the
Service Flow direction, upstream scheduling type
or Service Flow bonding configuration. The attribute
value reported in this case is specified by those attributes
descriptions."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flow
Encodings section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosMibObjects 2}
docsQosParamSetEntry OBJECT-TYPE
SYNTAX DocsQosParamSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosParamSetTable.
The ifIndex key corresponds to the MAC Domain interface of the
service flow of this Qos Param Set."
INDEX { ifIndex,docsQosParamSetType,docsQosParamSetServiceFlowId }
::= { docsQosParamSetTable 1 }
DocsQosParamSetEntry ::= SEQUENCE {
docsQosParamSetServiceClassName
SnmpAdminString,
docsQosParamSetPriority
Unsigned32,
docsQosParamSetMaxTrafficRate
BitRate,
docsQosParamSetMaxTrafficBurst
Unsigned32,
docsQosParamSetMinReservedRate
BitRate,
docsQosParamSetMinReservedPkt
Unsigned32,
docsQosParamSetActiveTimeout
Unsigned32,
docsQosParamSetAdmittedTimeout
Unsigned32,
docsQosParamSetMaxConcatBurst
Unsigned32,
docsQosParamSetSchedulingType
SchedulingType,
docsQosParamSetNomPollInterval
Unsigned32,
docsQosParamSetTolPollJitter
Unsigned32,
docsQosParamSetUnsolicitGrantSize
Unsigned32,
docsQosParamSetNomGrantInterval
Unsigned32,
docsQosParamSetTolGrantJitter
Unsigned32,
docsQosParamSetGrantsPerInterval
Unsigned32,
docsQosParamSetTosAndMask
OCTET STRING,
docsQosParamSetTosOrMask
OCTET STRING,
docsQosParamSetMaxLatency
Unsigned32,
docsQosParamSetType
INTEGER,
docsQosParamSetRequestPolicyOct
OCTET STRING,
docsQosParamSetBitMap
BITS,
docsQosParamSetServiceFlowId
Unsigned32,
docsQosParamSetRequiredAttrMask
AttributeMask,
docsQosParamSetForbiddenAttrMask
AttributeMask,
docsQosParamSetAttrAggrRuleMask
AttrAggrRuleMask,
docsQosParamSetAppId
Unsigned32,
docsQosParamSetMultiplierContentionReqWindow
Unsigned32,
docsQosParamSetMultiplierBytesReq
Unsigned32,
docsQosParamSetMaxReqPerSidCluster
Unsigned32,
docsQosParamSetMaxOutstandingBytesPerSidCluster
Unsigned32,
docsQosParamSetMaxTotBytesReqPerSidCluster
Unsigned32,
docsQosParamSetMaxTimeInSidCluster
Unsigned32,
docsQosParamSetPeakTrafficRate
Unsigned32,
docsQosParamSetDsResequencing
INTEGER,
docsQosParamSetMaximumBuffer
Unsigned32,
docsQosParamSetMinimumBuffer
Unsigned32,
docsQosParamSetTargetBuffer
Unsigned32
}
docsQosParamSetServiceClassName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the Service Class Name
from which the parameter set values were derived.
If the referenced parameter is not present in the corresponding
DOCSIS QOS Parameter Set, this attribute returns the
zero-length string."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Class Name
section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 4 }
docsQosParamSetPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the relative priority
of a Service Flow. Higher numbers indicate higher priority.
This priority should only be used to differentiate Service
Flow from identical parameter sets.
This attribute returns 0 if the referenced parameter
is not present in the corresponding DOCSIS QOS Parameter
Set or if the parameter is not applicable."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Traffic Priority
section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsQosParamSetEntry 5 }
docsQosParamSetMaxTrafficRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the maximum sustained
traffic rate allowed for this Service Flow in bits/sec.
It counts all MAC frame data PDUs from the bytes following
the MAC header HCS to the end of the CRC. The number
of bytes forwarded is limited during any time interval.
The value 0 means no maximum traffic rate is enforced.
This attribute applies to both upstream and
downstream Service Flows.
This attribute returns 0 if the referenced parameter
is not present in the corresponding DOCSIS QOS Parameter
Set, or if the parameter is not applicable."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Maximum Sustained
Traffic Rate section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 6 }
docsQosParamSetMaxTrafficBurst OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the token bucket size in
bytes for this parameter set. The value is calculated
from the byte following the MAC header HCS to the end
of the CRC. This object is applied in conjunction with
MaxTrafficRate to calculate maximum sustained traffic
rate.
If the referenced parameter is not present in the corresponding
DOCSIS QOS Parameter Set, this attribute
returns 3044 for scheduling types 'bestEffort', 'nonRealTimePollingService'
and 'realTimePollingService'.
If this parameter is not applicable, it is reported as
0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Maximum Traffic
Burst section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 7 }
docsQosParamSetMinReservedRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the guaranteed minimum
rate in bits/sec for this parameter set. The value is
calculated from the byte following the MAC header HCS
to the end of the CRC. The value of 0 indicates that no
bandwidth is reserved.
If the referenced parameter is not present in the corresponding
DOCSIS QOS Parameter Set, this attribute
returns 0. If the parameter is not applicable, it is
reported as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Minimum Reserved
Traffic Rate section of the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 8 }
docsQosParamSetMinReservedPkt OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies an assumed minimum packet
size in bytes for which the MinReservedRate will be
provided. The value is calculated from the byte following
the MAC header HCS to the end of the CRC. If the referenced
parameter is omitted from a DOCSIS QOS parameter
set, the used and reported value is CMTS implementation
and the CM reports a value of 0. If the referenced
parameter is not applicable to the direction or
scheduling type of the Service Flow, both CMTS and CM
report the value 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Assumed Minimum
Reserved Rate Packet Size, in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosParamSetEntry 9 }
docsQosParamSetActiveTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum duration in
seconds that resources remain unused on an active service
flow before the CMTS signals that both the active
and admitted parameter sets are null. The value 0 signifies
an infinite amount of time.
If the referenced parameter is not present in the corresponding
DOCSIS QOS Parameter Set, this attribute
returns 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Timeout for Active
QoS Parameters section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 10 }
docsQosParamSetAdmittedTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum duration in
seconds that resources remain in admitted state before
resources must be released. The value of 0 signifies
an infinite amount of time. If the referenced parameter
is not present in the corresponding DOCSIS QOS
Parameter Set, this attribute returns 200."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Timeout for Admitted
QoS Parameters section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 11 }
docsQosParamSetMaxConcatBurst OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum concatenated
burst in bytes that an upstream Service Flow is allowed.
The value is calculated from the FC byte of the Concatenation
MAC Header to the last CRC byte of the last concatenated
MAC frame, inclusive. The value of 0 specifies
no maximum burst.
If the referenced parameter is not present in the corresponding
DOCSIS QOS Parameter Set, this attribute
returns the value of 1522 for scheduling types 'bestEffort',
'nonRealTimePollingService', and 'realTimePollingService'.
If the parameter is not applicable,
it is reported as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Maximum Concatenated
Burst section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 12 }
docsQosParamSetSchedulingType OBJECT-TYPE
SYNTAX SchedulingType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the upstream scheduling
service used for upstream Service Flow.
If the referenced parameter is not present in the corresponding
DOCSIS QOS Parameter Set of an upstream Service
Flow, this attribute returns the value of 'bestEffort'.
For QOS parameter sets of downstream Service
Flows, this attribute's value is reported as 'undefined'."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flow
Scheduling Type section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 13 }
docsQosParamSetNomPollInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the nominal interval in
microseconds between successive unicast request opportunities
on an upstream Service Flow.
This attribute applies only to upstream Service Flows
with SchedulingType of value 'nonRealTimePollingService',
'realTimePollingService', and 'unsolictedGrantServiceWithAD'.
The parameter is mandatory
for 'realTimePollingService'. If the parameter
is omitted with 'nonRealTimePollingService',
the CMTS uses an implementation-dependent value. If
the parameter is omitted with 'unsolictedGrantServiceWithAD(5)'
the CMTS uses the value of the Nominal
Grant Interval parameter. In all cases, the CMTS reports
the value it is using when the parameter is applicable.
The CM reports the signaled parameter value
if it was signaled. Otherwise, it returns 0.
If the referenced parameter is not applicable to the
direction or scheduling type of the corresponding DOCSIS
QOS Parameter Set, both CMTS and CM report this
attribute's value as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Polling Interval
section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 14 }
docsQosParamSetTolPollJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum amount of time
in microseconds that the unicast request interval
may be delayed from the nominal periodic schedule on
an upstream Service Flow. This parameter is applicable
only to upstream Service Flows with a SchedulingType
of 'realTimePollingService' or 'unsolictedGrantServiceWithAD'.
If the referenced parameter is applicable but not present
in the corresponding DOCSIS QOS Parameter Set,
the CMTS uses an implementation-dependent value and
reports the value it is using. The CM reports a value
of 0 in this case.
If the parameter is not applicable to the direction or
upstream scheduling type of the Service Flow, both
CMTS and CM report this attribute's value as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Tolerated Poll
Jitter section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 15 }
docsQosParamSetUnsolicitGrantSize OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the unsolicited grant size
in bytes. The grant size includes the entire MAC frame
data PDU from the Frame Control byte to the end of
the MAC frame.
The referenced parameter is applicable only for upstream
flows with a SchedulingType of 'unsolicitedGrantServicewithAD'
or 'unsolicitedGrantService',
and it is mandatory when applicable. Both CMTS and
CM report the signaled value of the parameter in this
case.
If the referenced parameter is not applicable to the
direction or scheduling type of the corresponding DOCSIS
QOS Parameter Set, both CMTS and CM report this
attribute's value as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Unsolicited
Grant Size section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 16 }
docsQosParamSetNomGrantInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the nominal interval in
microseconds between successive data grant opportunities
on an upstream Service Flow.
The referenced parameter is applicable only for upstream
flows with a SchedulingType of 'unsolicitedGrantServicewithAD'
or 'unsolicitedGrantService(6)',
and it is mandatory when applicable. Both CMTS
and CM report the signaled value of the parameter in this
case.
If the referenced parameter is not applicable to the
direction or scheduling type of the corresponding DOCSIS
QOS Parameter Set, both CMTS and CM report this
attribute's value as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Nominal Grant
Interval section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 17 }
docsQosParamSetTolGrantJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum amount of time
in microseconds that the transmission opportunities
may be delayed from the nominal periodic schedule.
The referenced parameter is applicable only for
upstream flows with a SchedulingType of 'unsolicitedGrantServicewithAD'
or 'unsolicitedGrantService(6)',
and it is mandatory when applicable. Both CMTS
and CM report the signaled value of the parameter
in this case.
If the referenced parameter is not applicable to the
direction or scheduling type of the corresponding DOCSIS
QOS Parameter Set, both CMTS and CM report this
attribute's value as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Tolerated Grant
Jitter section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 18 }
docsQosParamSetGrantsPerInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
UNITS "dataGrants"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the number of data grants
per Nominal Grant Interval (NomGrantInterval). The
referenced parameter is applicable only for upstream
flows with a SchedulingType of 'unsolicitedGrantServicewithAD'
or 'unsolicitedGrantService',
and it is mandatory when applicable. Both CMTS and CM
report the signaled value of the parameter in this case.
If the referenced parameter is not applicable to the
direction or scheduling type of the corresponding DOCSIS
QOS Parameter Set, both CMTS and CM report this
attribute's value as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Grants per
Interval section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 19 }
docsQosParamSetTosAndMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the AND mask for the IP TOS
byte for overwriting an IPv4 packet's TOS value or IPv6
packet's Traffic Class value. The IP packet TOS byte
is bitwise ANDed with TosAndMask, then the result
is bitwise ORed with TosORMask and the result is written
to the IP packet TOS byte.
A value of 'FF'H for TosAndMask and a value of '00'H for
TosOrMask means that the IP Packet TOS byte is not overwritten.
This combination is reported if the referenced parameter
is not present in a QOS Parameter Set.
The IP TOS octet as originally defined in RFC 791 has been
superseded by the 6-bit Differentiated Services
Field (DSField, RFC 3260) and the 2-bit Explicit Congestion
Notification Field (ECN field, RFC 3168).
The IPv6 Traffic Class octet RFC 2460 is consistent with
that new definition.
Network operators SHOULD avoid specifying values of
TosAndMask and TosORMask that would result in the modification
of the ECN bits.
In particular, operators should not use values of TosAndMask
that have either of the least-significant
two bits set to 0. Similarly, operators should not use
values of TosORMask that have either of the least-significant
two bits set to 1.
Even though this attribute is only enforced by the CMTS,
the CM reports the value as signaled in the referenced
parameter."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IP Type Of Service
(DSCP) Overwrite section in the Common Radio Frequency
Interface Encodings Annex; [RFC 3168]; [RFC 3260];
[RFC 2460]; [RFC 791]."
::= { docsQosParamSetEntry 20 }
docsQosParamSetTosOrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the OR mask for the IPv4 TOS
value or IPv6 Traffic Class value. See the description
of TosAndMask for further details.
The IP TOS octet, as originally defined in RFC 791 has
been superseded by the 6-bit Differentiated Services
Field (DSField, RFC 3260) and the 2-bit Explicit Congestion
Notification Field (ECN field, RFC 3168).
The IPv6 Traffic Class octet RFC 2460 is consistent
with that new definition.
Network operators SHOULD avoid specifying values of
TosAndMask and TosORMask that would result in the modification
of the ECN bits."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, IP Type Of Service
(DSCP) Overwrite section in the Common Radio Frequency
Interface Encodings Annex; [RFC 3168]; [RFC 3260];
[RFC 2460]; [RFC 791]."
::= { docsQosParamSetEntry 21 }
docsQosParamSetMaxLatency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum latency between
the reception of a packet by the CMTS on its NSI and
the forwarding of the packet to the RF interface. A value
of 0 signifies no maximum latency is enforced. This
attribute only applies to downstream Service Flows.
If the referenced parameter is not present in the corresponding
downstream DOCSIS QOS Parameter Set, this
attribute returns 0. This parameter is not applicable
to upstream DOCSIS QOS Parameter Sets, so its value
is reported as 0 in that case."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Maximum Downstream
Latency section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 22 }
docsQosParamSetType OBJECT-TYPE
SYNTAX INTEGER {
active (1),
admitted(2),
provisioned(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents the QoS Parameter Set Type of the
Service Flow.
The following values are defined:
'active'
Indicates the Active QOS parameter set, describing
the service currently being provided by the DOCSIS MAC
domain to the service flow.
'admitted'
Indicates the Admitted QOS Parameter Set, describing
services reserved by the DOCSIS MAC domain for use
by the service flow.
'provisioned'
Indicates the QOS Parameter Set defined in the DOCSIS
CM Configuration file for the service flow."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flow
Scheduling Type section in the Common Radio Frequency
Interface Encodings Annex; [RFC 4323]."
::= { docsQosParamSetEntry 23 }
docsQosParamSetRequestPolicyOct OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
-- A 32-bit mask represented most significant byte
-- first. The 32-bit integer represented in this
-- manner equals the binary value of the referenced
-- integer parameter of the DOCSIS RFI
-- specification.
-- The BITS syntax is not used in order to avoid
-- the confusion caused by different bit-numbering
-- conventions.
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies which transmit interval
opportunities the CM omits for upstream transmission
requests and packet transmissions. This object
takes its default value for downstream Service Flows.
Unless otherwise indicated, a bit value of 1 means
that a CM must not use that opportunity for upstream transmission.
The format of this string enumerated the bits from 0 to
31 from left to right, for example bit 0 corresponds
to the left most bit of the fourth octet. (octets numbered
from right to left). The bit positions are defined
as follows:
'broadcastReqOpp'
all CMs broadcast request opportunities
'priorityReqMulticastReq'
priority request multicast request opportunities
'reqDataForReq'
request/data opportunities for requests
'reqDataForData'
request/data opportunities for data
'piggybackReqWithData'
piggyback requests with data
'concatenateData'
concatenate data
'fragmentData'
fragment data
'suppressPayloadHeaders'
suppress payload headers
'dropPktsExceedUGSize'
A value of 1 means that the service flow must drop
packets that do not fit in the Unsolicited Grant size.
If the referenced parameter is not present in a QOS Parameter
Set, the value of this object is reported as '00000000'H."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Request/
Transmission Policy section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosParamSetEntry 24 }
docsQosParamSetBitMap OBJECT-TYPE
SYNTAX BITS {
trafficPriority(0),
maxTrafficRate(1),
maxTrafficBurst(2),
minReservedRate(3),
minReservedPkt(4),
activeTimeout(5),
admittedTimeout(6),
maxConcatBurst(7),
schedulingType(8),
requestPolicy(9),
nomPollInterval(10),
tolPollJitter(11),
unsolicitGrantSize(12),
nomGrantInterval(13),
tolGrantJitter(14),
grantsPerInterval(15),
tosOverwrite(16),
maxLatency(17),
requiredAttrMask(18),
forbiddenAttrMask(19),
attrAggrMask(20),
applicationId(21),
multipCntnReqWindow(22),
multipBytesReq(23),
maxReqPerSidCluster(24),
maxOutstandingBytesPerSidCluster(25),
maxTotalBytesReqPerSidCluster(26),
maximumTimeInSidCluster(27),
peakTrafficRate(28),
dsResequencing(29)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the set of QOS Parameter
Set parameters actually signaled in the DOCSIS registration
or dynamic service request message that created
or modified the QOS Parameter Set. A bit is set to
1 when the associated parameter is present in the original
request as follows:
'trafficPriority' Traffic Priority
'maxTrafficRate' Maximum Sustained Traffic Rate
'maxTrafficBurst' Maximum Traffic Burst
'minReservedRate' Minimum Reserved Traffic Rate
'minReservedPkt' Assumed Minimum Reserved Rate Packet
Size
'activeTimeout' Timeout for Active QoS Parameters
'admittedTimeout' Timeout for Admitted QoS Parameters
'maxConcatBurst' Maximum Concatenated Burst
'schedulingType' Service Flow Scheduling Type
'requestPolicy' Request/Transmission Policy
'nomPollInterval' Nominal Polling Interval
'tolPollJitter' Tolerated Poll Jitter
'unsolicitGrantSize' Unsolicited Grant Size
'nomGrantInterval' Nominal Grant Interval
'tolGrantJitter' Tolerated Grant Jitter
'grantsPerInterval' Grants per Interval
'tosOverwrite' IP Type of Service (DSCP) Overwrite
'maxLatency' Maximum Downstream Latency
'requiredAttrMask' Service Flow Required Attribute
Mask
'forbiddenAttrMask Service Flow Forbidden Attribute
Mask
'attrAggrMask' Service Flow Attribute Aggregation
Mask
'applicationId' Application Identifier
'multipCntnReqWindow' Multiplier to Contention
Request Backoff Window
'multipBytesReq' Multiplier to Number of Bytes Requested
'maxReqPerSidCluster' Maximum Requests per SID Cluster
'maxOutstandingBytesPerSidCluster' Maximum Outstanding
Bytes per SID Cluster
'maxTotalBytesReqPerSidCluster' Maximum Total
Bytes Requested per SID
Cluster
'maximumTimeInSidCluster' Maximum Time in the SID Cluster
'peakTrafficRate' Downstream Peak Traffic Rate
'dsResequencing' Downstream Resequencing
Note that when Service Class names are expanded, the
registration or dynamic response message may contain
parameters expanded by the CMTS based on a stored service
class. These expanded parameters are not indicated
by a 1 bit in this attribute.
Note that even though some QOS Parameter Set parameters
may not be signaled in a message (so that the parameter's
bit in this object is 0), the DOCSIS specification
requires that default values be used. These default
values are reported as the corresponding attribute."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flow
Encodings section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 25 }
docsQosParamSetServiceFlowId OBJECT-TYPE
SYNTAX Unsigned32 (1.. 4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents the Service Flow ID for the service
flow."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service
Identifier section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 26 }
docsQosParamSetRequiredAttrMask OBJECT-TYPE
SYNTAX AttributeMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the Required Attribute
Mask to compare with the Provisioned Required Attributes
when selecting the bonding groups for the service
flow.
If the referenced parameter is not present in the corresponding
DOCSIS QOS Parameter Set, this attribute returns '00000000'H."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Required
Attribute Mask section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 27 }
docsQosParamSetForbiddenAttrMask OBJECT-TYPE
SYNTAX AttributeMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the Forbidden Attribute
Mask to compare with the Provisioned Forbidden Attributes
when selecting the bonding groups for the service
flow.
If the referenced parameter is not present in the corresponding
DOCSIS QOS Parameter Set, this attribute returns '00000000'H."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Forbidden
Attribute Mask section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 28 }
docsQosParamSetAttrAggrRuleMask OBJECT-TYPE
SYNTAX AttrAggrRuleMask
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the Attribute Aggregation
Mask to compare the Service Flow Required and Forbidden
Attributes with the CMTS dynamically-created
bonding group when selecting the bonding groups for
the service flow.
If the referenced parameter is not present in the corresponding
DOCSIS QOS Parameter Set, this attribute returns '00000000'H."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flow
Attribute Aggregation Mask section in the Common Radio
Frequency Interface Encodings Annex."
::= { docsQosParamSetEntry 29 }
docsQosParamSetAppId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the Application Identifier
associated with the service flow for purposes beyond the
scope of this specification.
If the referenced parameter is not present in the corresponding
DOCSIS QOS Parameter Set, this attribute returns 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Application
Identifier section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosParamSetEntry 30 }
docsQosParamSetMultiplierContentionReqWindow OBJECT-TYPE
SYNTAX Unsigned32 (4..12)
UNITS "eighths"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the multiplier to be applied by a
CM when performing contention request backoff for data requests.
This attribute only applies to upstream Service Flows in 3.0
operation. If the referenced parameter is not present in the
upstream DOCSIS QOS Parameter Set or is not applicable, this
attribute returns 8."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Multiplier to
Contention Request Backoff Window section in the Common
Radio Frequency Interface Encodings Annex."
::= { docsQosParamSetEntry 31 }
docsQosParamSetMultiplierBytesReq OBJECT-TYPE
SYNTAX Unsigned32 (1 | 2 | 4 | 8 | 16)
UNITS "requests"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the assumed bandwidth request
multiplier. This attribute only applies to upstream Service
Flows in 3.0 operation. If the referenced parameter is not
present in the upstream DOCSIS QOS Parameter Set, or is not
applicable, this attribute returns 4."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Multiplier
to Number of Bytes Requested section in the Common
Radio Frequency Interface Encodings Annex."
::= { docsQosParamSetEntry 32 }
docsQosParamSetMaxReqPerSidCluster OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This attribute specifies the maximum number of requests
that a CM can make within a given SID Cluster before it must
switch to a different SID Cluster to make further requests.
A value of 0 indicates there is no limit.
This attribute only applies to upstream Service Flows in 3.0
operation, in other cases it is reported as 0. If the
referenced parameter is not present in the DOCSIS QOS
Parameter Set, this attribute returns 0.
This attribute has been deprecated and replaced with
docsQosServiceFlowMaxReqPerSidCluster in the
docsQosServiceFlowTable."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Maximum Requests
per SID Cluster section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosParamSetEntry 33 }
docsQosParamSetMaxOutstandingBytesPerSidCluster OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This attribute specifies the maximum number of bytes
for which a CM can have requests outstanding on a given
SID Cluster. If defined number of bytes are outstanding
and further requests are required, the CM must switch to
a different SID Cluster if one is available. A value of 0
indicates there is no limit.
This attribute only applies to upstream Service Flows in 3.0
operation, in other cases it is reported as 0.
If the referenced parameter is not present in the DOCSIS QOS
Parameter Set, this attribute returns 0.
This attribute has been deprecated and replaced with
docsQosServiceFlowMaxOutstandingBytesPerSidCluster in the
docsQosServiceFlowTable."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Maximum
Outstanding Bytes per SID Cluster section in the Common
Radio Frequency Interface Encodings Annex."
::= { docsQosParamSetEntry 34 }
docsQosParamSetMaxTotBytesReqPerSidCluster OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This attribute specifies the maximum total number of bytes
a CM can have requested using a given SID Cluster before it
must switch to a different SID Cluster to make further
requests. A value of 0 indicates there is no limit.
This attribute only applies to upstream Service Flows in 3.0
operation, in other cases it is reported as 0.
If the referenced parameter is not present in the DOCSIS QOS
Parameter Set, this attribute returns 0.
This attribute has been deprecated and replaced with
docsQosServiceFlowMaxTotBytesReqPerSidCluster in the
docsQosServiceFlowTable."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Maximum Total Bytes
Requested per SID Cluster section in the Common Radio
Frequency Interface Encodings Annex."
::= { docsQosParamSetEntry 35 }
docsQosParamSetMaxTimeInSidCluster OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This attribute specifies the maximum time in milliseconds
that a CM may use a particular SID Cluster before it must
switch to a different SID Cluster to make further requests.
A value of 0 indicates there is no limit.
This attribute only applies to upstream Service Flows in 3.0
operation, in other cases it is reported as 0.
If the referenced parameter is not present in the DOCSIS QOS
Parameter Set, this attribute returns 0.
This attribute has been deprecated and replaced with
docsQosServiceFlowMaxTimeInSidCluster in the
docsQosServiceFlowTable."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Maximum Time in
the SID Cluster section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosParamSetEntry 36 }
docsQosParamSetPeakTrafficRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the rate parameter 'P' of a
token-bucket-based peak rate limiter for packets of a
downstream service flow. A value of 0 signifies no
Downstream Peak Traffic Rate is enforced.
This attribute only applies to downstream Service Flows.
If the referenced parameter is not present in the
corresponding downstream DOCSIS QOS Parameter Set,
this attribute returns 0.
This parameter is not applicable to upstream DOCSIS QOS
Parameter Sets, so its value is reported as 0 in that case."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Downstream
Peak Traffic Rage section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosParamSetEntry 37 }
docsQosParamSetDsResequencing OBJECT-TYPE
SYNTAX INTEGER {
resequencingDsidIfBonded(0),
noResequencingDsid(1),
notApplicable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies if a resequencing DSID needs to be
allocated to the service flow.
The value 'resequencingDsidIfBonded' indicates that a resequencing DSID
is required if the service flow is assigned to a downstream
bonding group.
The value 'noResequencingDsid' indicates no resequencing DSID
is associated with the service flow.
The value 'notApplicable' indicates the value of this attribute
is not applicable.
This attribute only applies to downstream Service Flows in 3.0
operation. If the referenced parameter is not present in the
corresponding downstream DOCSIS QOS Parameter Set, this
attribute returns 'resequencingDsidIfBonded'. This parameter is not applicable to
upstream DOCSIS QOS Parameter Sets, so the value 'notApplicable' is reported
in that case."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I06-071206,
Peak Traffic Rate section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosParamSetEntry 38 }
docsQosParamSetMinimumBuffer OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the configured minimum buffer size
for the service flow."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I15-yymmdd, , Buffer Control
section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsQosParamSetEntry 39 }
docsQosParamSetTargetBuffer OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the configured target buffer size
for the service flow. The value 0 indicates that no target buffer
size was configured, and the device will use a vendor specific
value."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I15-yymmdd, , Buffer Control
section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsQosParamSetEntry 40 }
docsQosParamSetMaximumBuffer OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the configured maximum buffer size
for the service flow. The value 4294967295 indicates that no maximum buffer
size was configured, and thus there is no limit to the buffer size."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I15-yymmdd, , Buffer Control
section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsQosParamSetEntry 41 }
docsQosServiceFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes the set of DOCSIS-QOS Service
Flows in a managed device."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service
lows and Classifiers section."
::= { docsQosMibObjects 3}
docsQosServiceFlowEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosServiceFlowTable.
The ifIndex key corresponds to the MAC Domain interface
of this service flow."
INDEX { ifIndex,docsQosServiceFlowId }
::= { docsQosServiceFlowTable 1 }
DocsQosServiceFlowEntry ::= SEQUENCE {
docsQosServiceFlowId
Unsigned32,
docsQosServiceFlowSID
Unsigned32,
docsQosServiceFlowDirection
IfDirection,
docsQosServiceFlowPrimary
TruthValue,
docsQosServiceFlowParamSetTypeStatus
BITS,
docsQosServiceFlowChSetId
ChSetId,
docsQosServiceFlowAttrAssignSuccess
TruthValue,
docsQosServiceFlowDsid
Dsid,
docsQosServiceFlowMaxReqPerSidCluster
Unsigned32,
docsQosServiceFlowMaxOutstandingBytesPerSidCluster
Unsigned32,
docsQosServiceFlowMaxTotBytesReqPerSidCluster
Unsigned32,
docsQosServiceFlowMaxTimeInSidCluster
Unsigned32,
docsQosServiceFlowBufferSize
Unsigned32
}
docsQosServiceFlowId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents an identifier assigned to a Service
Flow by CMTS within a MAC Domain.
The value 0 is used only for the purpose of reporting instances
of the PktClass object pertaining UDCs and
not used for association of QOS classifiers to service
flows."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flow
Identifier section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosServiceFlowEntry 1 }
docsQosServiceFlowSID OBJECT-TYPE
SYNTAX Unsigned32 (0..16383)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Service Identifier (SID) assigned to an admitted
or active Service Flow. This attribute
reports a value of 0 if a Service ID is not associated with
the Service Flow. Only active
or admitted upstream Service Flows will have a Service
ID (SID)."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service
Identifier section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosServiceFlowEntry 6 }
docsQosServiceFlowDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the direction of the Service
Flow."
::= { docsQosServiceFlowEntry 7 }
docsQosServiceFlowPrimary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reflects whether Service Flow is the
primary
or a secondary Service Flow."
::= { docsQosServiceFlowEntry 8 }
docsQosServiceFlowParamSetTypeStatus OBJECT-TYPE
SYNTAX BITS {
active(0),
admitted(1),
provisioned(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the status of the service
flow based on the admission state.
'active' bit set to '1' indicates that the service flow
is active and that the corresponding QOS ParamSet
is stored in the CMTS.
'admitted' bit set to '1' indicates that the service
flow resources were reserved and that the corresponding
QOS ParamSet is stored in the CMTS.
'provisioned' bit set to '1' indicates that the service
flow was defined in the CM config file and that the
corresponding QOS ParamSet is stored in the CMTS."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service
Flow Section."
::= { docsQosServiceFlowEntry 9 }
docsQosServiceFlowChSetId OBJECT-TYPE
SYNTAX ChSetId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the Channel Set Id associated
with the service flow."
::= { docsQosServiceFlowEntry 10 }
docsQosServiceFlowAttrAssignSuccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If set to 'true', this attribute indicates that the
current channel set associated with the service flow
meets the Required and Forbidden Attribute Mask encodings.
Since this attribute is not applicable for a CM, the
CM always returns 'false'."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flow
section."
::= { docsQosServiceFlowEntry 11 }
docsQosServiceFlowDsid OBJECT-TYPE
SYNTAX Dsid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the DSID associated with
the downstream service flow. downstream service flows
without a DSID or upstream Service Flows report
the value zero."
::= { docsQosServiceFlowEntry 12 }
docsQosServiceFlowMaxReqPerSidCluster OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum number of requests
that a CM can make within a given SID Cluster before it must
switch to a different SID Cluster to make further requests.
A value of 0 indicates there is no limit.
This attribute only applies to upstream Service Flows in 3.0
operation, in other cases it is reported as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I08-080522, Maximum Requests
per SID Cluster section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosServiceFlowEntry 13 }
docsQosServiceFlowMaxOutstandingBytesPerSidCluster OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum number of bytes
for which a CM can have requests outstanding on a given
SID Cluster. If defined number of bytes are outstanding
and further requests are required, the CM must switch to
a different SID Cluster if one is available. A value of 0
indicates there is no limit.
This attribute only applies to upstream Service Flows in 3.0
operation, in other cases it is reported as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I08-080522, Maximum
Outstanding Bytes per SID Cluster section in the Common
Radio Frequency Interface Encodings Annex."
::= { docsQosServiceFlowEntry 14 }
docsQosServiceFlowMaxTotBytesReqPerSidCluster OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum total number of bytes
a CM can have requested using a given SID Cluster before it
must switch to a different SID Cluster to make further
requests. A value of 0 indicates there is no limit.
This attribute only applies to upstream Service Flows in 3.0
operation, in other cases it is reported as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I08-080522, Maximum Total Bytes
Requested per SID Cluster section in the Common Radio
Frequency Interface Encodings Annex."
::= { docsQosServiceFlowEntry 15 }
docsQosServiceFlowMaxTimeInSidCluster OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the maximum time in milliseconds
that a CM may use a particular SID Cluster before it must
switch to a different SID Cluster to make further requests.
A value of 0 indicates there is no limit.
This attribute only applies to upstream Service Flows in 3.0
operation, in other cases it is reported as 0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I08-080522, Maximum Time in
the SID Cluster section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosServiceFlowEntry 16 }
docsQosServiceFlowBufferSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the buffer size for the service
flow. For the CM this attribute only applies to upstream
Service Flows, for the CMTS this attribute only applies to
downstream Service Flows, in other cases it is reported as
0."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I15-yymmdd, Buffer Control
section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsQosServiceFlowEntry 17 }
docsQosServiceFlowStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes statistics associated with
the Service Flows in a managed device."
::= { docsQosMibObjects 4}
docsQosServiceFlowStatsEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosServiceFlowStatsTable.
The ifIndex key corresponds to the MAC Domain interface
of the service flow."
INDEX { ifIndex,docsQosServiceFlowId }
::= { docsQosServiceFlowStatsTable 1 }
DocsQosServiceFlowStatsEntry ::= SEQUENCE {
docsQosServiceFlowPkts
Counter64,
docsQosServiceFlowOctets
Counter64,
docsQosServiceFlowTimeCreated
TimeStamp,
docsQosServiceFlowTimeActive
Counter32,
docsQosServiceFlowPHSUnknowns
Counter32,
docsQosServiceFlowPolicedDropPkts
Counter32,
docsQosServiceFlowPolicedDelayPkts
Counter32
}
docsQosServiceFlowPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For outgoing Service Flows, this attribute counts
the number of Packet Data PDUs forwarded to this Service
Flow. For incoming upstream CMTS service flows,
this attribute counts the number of Packet Data PDUs
actually received on the Service Flow identified by
the SID for which the packet was scheduled. CMs not classifying
downstream packets may report this attribute's
value as 0 for downstream Service Flows. This
attribute does not count MAC-specific management
messages.
Particularly for UGS flows, packets sent on the primary
Service Flow in violation of the UGS grant size should
be counted only by the instance of this attribute
that is associated with the primary service flow.
Unclassified upstream user data packets (i.e., non-
MAC-management) forwarded to the primary upstream
Service Flow should be counted by the instance of this
attribute that is associated with the primary service
flow.
This attribute does include packets counted by
ServiceFlowPolicedDelayPkts, but does not include packets
counted by ServiceFlowPolicedDropPkts and
ServiceFlowPHSUnknowns.
This counter's last discontinuity is the
ifCounterDiscontinuityTime for of the associated MAC Domain
interface index."
::= { docsQosServiceFlowStatsEntry 1 }
docsQosServiceFlowOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the count of the number of
octets from the byte after the MAC header HCS to the end
of the CRC for all packets counted in the ServiceFlowPkts
attribute for this row. Note that this counts
the octets after payload header suppression and before
payload header expansion have been applied.
This counter's last discontinuity is the
ifCounterDiscontinuityTime for of the associated MAC Domain
interface index."
::= { docsQosServiceFlowStatsEntry 2 }
docsQosServiceFlowTimeCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the value of sysUpTime when
the service flow was created."
::= { docsQosServiceFlowStatsEntry 3 }
docsQosServiceFlowTimeActive OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of seconds that
the service flow has been active.
This counter's last discontinuity is the
ifCounterDiscontinuityTime for of the associated MAC Domain
interface index."
::= { docsQosServiceFlowStatsEntry 4 }
docsQosServiceFlowPHSUnknowns OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For incoming upstream CMTS service flows, this attribute
counts the number of packets received with an
unknown payload header suppression index.
The service flow is identified by the SID for which the
packet was scheduled.
On a CM, only this attribute's instance for the primary
downstream service flow counts packets received
with an unknown payload header suppression index. All
other downstream service flows on CM report this attributes
value as 0.
All outgoing service flows report this attribute's
value as 0.
This counter's last discontinuity is the
ifCounterDiscontinuityTime for of the associated MAC Domain
interface index."
::= { docsQosServiceFlowStatsEntry 5 }
docsQosServiceFlowPolicedDropPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For outgoing service flows, this attribute counts
the number of Packet Data PDUs classified to this service
flow dropped due to:
(1) exceeding the selected Buffer Size for the service flow; or
(2) UGS packets dropped due to exceeding the Unsolicited
Grant Size with a Request/Transmission policy
that requires such packets to be dropped.
Classified packets dropped due to other reasons must
be counted in ifOutDiscards for the interface of this
service flow. This attribute reports 0 for incoming
service flows.
This counter's last discontinuity is the
ifCounterDiscontinuityTime for of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I15-yymmdd, Buffer Control section
and Request/Transmission Policy section."
::= { docsQosServiceFlowStatsEntry 6 }
docsQosServiceFlowPolicedDelayPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts only outgoing packets delayed
in order to maintain the Maximum Sustained Traffic
Rate. This attribute will always report a value of
0 for UGS flows because the Maximum Sustained Traffic
Rate does not apply. This attribute is 0 for incoming
service flows.
This counter's last discontinuity is the
ifCounterDiscontinuityTime for of the associated MAC Domain
interface index."
::= { docsQosServiceFlowStatsEntry 7 }
docsQosUpstreamStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosUpstreamStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes statistics associated with
upstream service flows. All counted frames must be
received without a Frame Check Sequence (FCS) error."
::= { docsQosMibObjects 5}
docsQosUpstreamStatsEntry OBJECT-TYPE
SYNTAX DocsQosUpstreamStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosUpstreamStatsTable.
The ifIndex key corresponds to the upstream logical channel
interface of the service flow."
INDEX { ifIndex,docsQosSID }
::= { docsQosUpstreamStatsTable 1 }
DocsQosUpstreamStatsEntry ::= SEQUENCE {
docsQosSID
Unsigned32,
docsQosUpstreamFragments
Counter32,
docsQosUpstreamFragDiscards
Counter32,
docsQosUpstreamConcatBursts
Counter32
}
docsQosSID OBJECT-TYPE
SYNTAX Unsigned32 (1..16383)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key identifies a service ID for an admitted
or active upstream service flow."
::= { docsQosUpstreamStatsEntry 1 }
docsQosUpstreamFragments OBJECT-TYPE
SYNTAX Counter32
UNITS "fragments"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribure indicates the number of fragmentation
headers received on an upstream service flow, regardless
of whether the fragment was correctly reassembled
into a valid packet.
This counter's last discontinuity is the
ifCounterDiscontinuityTime for of the associated MAC Domain
interface index."
::= { docsQosUpstreamStatsEntry 2 }
docsQosUpstreamFragDiscards OBJECT-TYPE
SYNTAX Counter32
UNITS "fragments"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of upstream fragments
discarded and not assembled into a valid upstream
packet.
This counter's last discontinuity is the
ifCounterDiscontinuityTime for of the associated MAC Domain
interface index."
::= { docsQosUpstreamStatsEntry 3 }
docsQosUpstreamConcatBursts OBJECT-TYPE
SYNTAX Counter32
UNITS "headers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of concatenation
headers received on an upstream service flow.
This counter's last discontinuity is the
ifCounterDiscontinuityTime for of the associated MAC Domain
interface index."
::= { docsQosUpstreamStatsEntry 4 }
docsQosDynamicServiceStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosDynamicServiceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes statistics associated with
the Dynamic Service Flows, Dynamic Channel Changes
and Dynamic Bonding Changes in a managed device within
a MAC Domain.
For each MAC Domain there are two instances for the for
the upstream and downstream
direction.
On the CMTS, the downstream direction instance indicates
messages transmitted or transactions originated
by the CMTS. The upstream direction intance indicates
messages received or transaction originated
by the CM.
On the CM, the downstream direction instance indicates
messages received or transactions originated by
the CMTS. The upstream direction instance indicates
messages transmitted by the CM or transactions originated
by the CM."
::= { docsQosMibObjects 6}
docsQosDynamicServiceStatsEntry OBJECT-TYPE
SYNTAX DocsQosDynamicServiceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosDynamicServiceStatsTable.
The ifIndex key corresponds to the MAC Domain interface
of the service flow."
INDEX { ifIndex,docsQosIfDirection }
::= { docsQosDynamicServiceStatsTable 1 }
DocsQosDynamicServiceStatsEntry ::= SEQUENCE {
docsQosIfDirection
IfDirection,
docsQosDSAReqs
Counter32,
docsQosDSARsps
Counter32,
docsQosDSAAcks
Counter32,
docsQosDSCReqs
Counter32,
docsQosDSCRsps
Counter32,
docsQosDSCAcks
Counter32,
docsQosDSDReqs
Counter32,
docsQosDSDRsps
Counter32,
docsQosDynamicAdds
Counter32,
docsQosDynamicAddFails
Counter32,
docsQosDynamicChanges
Counter32,
docsQosDynamicChangeFails
Counter32,
docsQosDynamicDeletes
Counter32,
docsQosDynamicDeleteFails
Counter32,
docsQosDCCReqs
Counter32,
docsQosDCCRsps
Counter32,
docsQosDCCAcks
Counter32,
docsQosDCCs
Counter32,
docsQosDCCFails
Counter32,
docsQosDCCRspDeparts
Counter32,
docsQosDCCRspArrives
Counter32,
docsQosDbcReqs
Counter32,
docsQosDbcRsps
Counter32,
docsQosDbcAcks
Counter32,
docsQosDbcSuccesses
Counter32,
docsQosDbcFails
Counter32,
docsQosDbcPartial
Counter32
}
docsQosIfDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute indicates the interface direction
for the instance the statistics are collected."
::= { docsQosDynamicServiceStatsEntry 1 }
docsQosDSAReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of Dynamic Service
Addition Requests, including retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Addition section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 2 }
docsQosDSARsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dynamic Service Addition Responses,
including retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Addition section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 3 }
docsQosDSAAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dynamic Service Addition Acknowledgements,
including retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Addition section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 4 }
docsQosDSCReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dynamic Service Change Requests, including
retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Change section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 5 }
docsQosDSCRsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dynamic Service Change Responses, including
retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Change section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 6 }
docsQosDSCAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dynamic Service Change Acknowledgements,
including retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Change section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 7 }
docsQosDSDReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dynamic Service Delete Requests, including
retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Delete section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 8 }
docsQosDSDRsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dynamic Service Delete Responses, including
retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Delete section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 9 }
docsQosDynamicAdds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Dynamic Service Addition
transactions.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Addition section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 10 }
docsQosDynamicAddFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed Dynamic Service Addition transactions.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Addition section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 11 }
docsQosDynamicChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Dynamic Service Change transactions.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Change section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 12 }
docsQosDynamicChangeFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed Dynamic Service Change transactions.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Change section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 13 }
docsQosDynamicDeletes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Dynamic Service Delete transactions.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Delete section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 14 }
docsQosDynamicDeleteFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed Dynamic Service Delete transactions.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Service
Delete section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 15 }
docsQosDCCReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dynamic Channel Change Request messages
traversing an interface. This count is nonzero
only on downstream direction rows. This count should
include the number of retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream
and/or Upstream Channel Changes section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 16 }
docsQosDCCRsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dynamic Channel Change Response messages
traversing an interface. This count is nonzero
only on upstream direction rows. This count should
include the number of retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream
and/or Upstream Channel Changes section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 17 }
docsQosDCCAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dynamic Channel Change Acknowledgement
messages traversing an interface. This count is
nonzero only on downstream direction rows. This count
should include the number of retries.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream
and/or Upstream Channel Changes section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 18 }
docsQosDCCs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Dynamic Channel Change transactions.
This count is nonzero only on downstream
direction rows.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream
and/or Upstream Channel Changes section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 19 }
docsQosDCCFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed Dynamic Channel Change transactions.
This count is nonzero only on downstream direction
rows.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and at
other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream
and/or Upstream Channel Changes section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 20 }
docsQosDCCRspDeparts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of Dynamic Channel
Change Response (depart) messages. It only applies
to upstream direction. Discontinuities in the
value of this counter can occur at reinitialization
of the managed system, and at other times as indicated
by the value of ifCounterDiscontinuityTime of the
associated MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream
and/or Upstream Channel Changes section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 21 }
docsQosDCCRspArrives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of Dynamic Channel
Change Response (arrive) messages and should include
retries. It only applies to the upstream direction.
Discontinuities in the value of this counter
can occur at reinitialization of the managed system,
and at other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Downstream
and/or Upstream Channel Changes section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 22 }
docsQosDbcReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of Dynamic Bonding
Change Requests, including retries. It only applies
to the upstream direction. Discontinuities in
the value of this counter can occur at reinitialization
of the managed system, and at other times as indicated
by the value of ifCounterDiscontinuityTime of
the associated MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding
Change (DBC) section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 23 }
docsQosDbcRsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of Dynamic Bonding
Change Responses, including retries. It only applies
to the upstream direction. Discontinuities
in the value of this counter can occur at reinitialization
of the managed system, and at other times as indicated
by the value of ifCounterDiscontinuityTime
of the associated MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding
Change (DBC) section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 24 }
docsQosDbcAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of Dynamic Bonding
Change Acknowledgements, including retries.
It only applies to the downstream direction. Discontinuities
in the value of this counter can occur at reinitialization
of the managed system, and at other times
as indicated by the value of ifCounterDiscontinuityTime
of the associated MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding
Change (DBC) section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 25 }
docsQosDbcSuccesses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of fully successful
Dynamic Bonding Change transactions. It only
applies to the downstream direction and does not include
DBC transactions that result in Partial Service.
Discontinuities in the value of this counter can occur
at reinitialization of the managed system, and
at other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding
Change (DBC) section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 26 }
docsQosDbcFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of failed Dynamic
Bonding Change transactions. It only applies to
the downstream direction. Note that Partial Service
is not considered a failed transaction. Discontinuities
in the value of this counter can occur at reinitialization
of the managed system, and at other times
as indicated by the value of ifCounterDiscontinuityTime
of the associated MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding
Change (DBC) section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 27 }
docsQosDbcPartial OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of unsuccessful
Dynamic Bonding Change transactions that result
in Partial Service. IT only applies to the downstream
direction. Discontinuities in the value of this counter
can occur at reinitialization of the managed system,
and at other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC
Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Dynamic Bonding
Change (DBC) section; [RFC 2863]."
::= { docsQosDynamicServiceStatsEntry 28 }
docsQosServiceFlowLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains a log of the disconnected Service
Flows in a managed device."
::= { docsQosMibObjects 7}
docsQosServiceFlowLogEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosServiceFlowLogTable."
INDEX { docsQosServiceFlowLogIndex }
::= { docsQosServiceFlowLogTable 1 }
DocsQosServiceFlowLogEntry ::= SEQUENCE {
docsQosServiceFlowLogIndex
Unsigned32,
docsQosServiceFlowLogIfIndex
InterfaceIndex,
docsQosServiceFlowLogSFID
Unsigned32,
docsQosServiceFlowLogCmMac
MacAddress,
docsQosServiceFlowLogPkts
Counter64,
docsQosServiceFlowLogOctets
Counter64,
docsQosServiceFlowLogTimeDeleted
TimeStamp,
docsQosServiceFlowLogTimeCreated
TimeStamp,
docsQosServiceFlowLogTimeActive
Counter32,
docsQosServiceFlowLogDirection
IfDirection,
docsQosServiceFlowLogPrimary
TruthValue,
docsQosServiceFlowLogServiceClassName
SnmpAdminString,
docsQosServiceFlowLogPolicedDropPkts
Counter32,
docsQosServiceFlowLogPolicedDelayPkts
Counter32,
docsQosServiceFlowLogControl
INTEGER
}
docsQosServiceFlowLogIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key indicates an unique index for a logged service
flow."
::= { docsQosServiceFlowLogEntry 1 }
docsQosServiceFlowLogIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the MAC Domain Interface
index where the service flow was present."
::= { docsQosServiceFlowLogEntry 2 }
docsQosServiceFlowLogSFID OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the identifier assigned
to the service flow."
::= { docsQosServiceFlowLogEntry 3 }
docsQosServiceFlowLogCmMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the MAC address of the cable
modem associated with the service flow."
::= { docsQosServiceFlowLogEntry 4 }
docsQosServiceFlowLogPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the final value of the Pkts
attribute in the ServiceFlowStats object for the
service flow."
::= { docsQosServiceFlowLogEntry 5 }
docsQosServiceFlowLogOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the final value of the Pkts
attribute in the ServiceFlowStats object for the
service flow."
::= { docsQosServiceFlowLogEntry 6 }
docsQosServiceFlowLogTimeDeleted OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the value of sysUpTime when
the service flow was deleted."
::= { docsQosServiceFlowLogEntry 7 }
docsQosServiceFlowLogTimeCreated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the value of sysUpTime when
the service flow was created."
::= { docsQosServiceFlowLogEntry 8 }
docsQosServiceFlowLogTimeActive OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the total time that the service
flow was active."
::= { docsQosServiceFlowLogEntry 9 }
docsQosServiceFlowLogDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the value of Service Flow
direction for the service flow."
::= { docsQosServiceFlowLogEntry 11 }
docsQosServiceFlowLogPrimary OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If set to 'true', this attribute indicates that the
Service Flow in the log was a Primary Service Flow, otherwise,
a Secondary Service Flow."
::= { docsQosServiceFlowLogEntry 12 }
docsQosServiceFlowLogServiceClassName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the value of ServiceClassName
for the provisioned QOS Parameter Set of the service
flow."
::= { docsQosServiceFlowLogEntry 13 }
docsQosServiceFlowLogPolicedDropPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the final value of PolicedDropPkts
attribute of the ServiceFlowStats object
for the service flow."
::= { docsQosServiceFlowLogEntry 14 }
docsQosServiceFlowLogPolicedDelayPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the final value of PolicedDelayPkts
attribute of the ServiceFlowStats object
for the service flow."
::= { docsQosServiceFlowLogEntry 15 }
docsQosServiceFlowLogControl OBJECT-TYPE
SYNTAX INTEGER {
active(1),
destroy(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute when set to 'destroy' removes this
instance from the object.
Reading this attribute returns the value 'active'."
::= { docsQosServiceFlowLogEntry 16 }
docsQosServiceClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes a provisioned service class
on a CMTS.
Each object instance defines a template for certain
DOCSIS QOS Parameter Set values. When a CM creates or
modifies an Admitted QOS Parameter Set for a Service
Flow, it may reference a Service Class Name instead of
providing explicit QOS Parameter
Set values. In this case, the CMTS populates the QOS Parameter
Set with the applicable
corresponding values from the named Service Class.
Subsequent changes to a Service Class row do not affect
the QOS Parameter Set values of any service flows already
admitted.
A service class template applies to only a single direction,
as indicated in the ServiceClassDirection
attribute."
::= { docsQosMibObjects 8}
docsQosServiceClassEntry OBJECT-TYPE
SYNTAX DocsQosServiceClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosServiceClassTable."
INDEX { docsQosServiceClassName }
::= { docsQosServiceClassTable 1 }
DocsQosServiceClassEntry ::= SEQUENCE {
docsQosServiceClassName
SnmpAdminString,
docsQosServiceClassStatus
RowStatus,
docsQosServiceClassPriority
Unsigned32,
docsQosServiceClassMaxTrafficRate
BitRate,
docsQosServiceClassMaxTrafficBurst
Unsigned32,
docsQosServiceClassMinReservedRate
BitRate,
docsQosServiceClassMinReservedPkt
Unsigned32,
docsQosServiceClassMaxConcatBurst
Unsigned32,
docsQosServiceClassNomPollInterval
Unsigned32,
docsQosServiceClassTolPollJitter
Unsigned32,
docsQosServiceClassUnsolicitGrantSize
Unsigned32,
docsQosServiceClassNomGrantInterval
Unsigned32,
docsQosServiceClassTolGrantJitter
Unsigned32,
docsQosServiceClassGrantsPerInterval
Unsigned32,
docsQosServiceClassMaxLatency
Unsigned32,
docsQosServiceClassActiveTimeout
Unsigned32,
docsQosServiceClassAdmittedTimeout
Unsigned32,
docsQosServiceClassSchedulingType
SchedulingType,
docsQosServiceClassRequestPolicy
OCTET STRING,
docsQosServiceClassTosAndMask
OCTET STRING,
docsQosServiceClassTosOrMask
OCTET STRING,
docsQosServiceClassDirection
IfDirection,
docsQosServiceClassStorageType
StorageType,
-- Closed by TI for CM MIB compilation.
-- docsQosServiceClassDSCPOverwrite
-- DscpOrAny,
docsQosServiceClassRequiredAttrMask
AttributeMask,
docsQosServiceClassForbiddenAttrMask
AttributeMask,
docsQosServiceClassAttrAggrRuleMask
AttrAggrRuleMask,
docsQosServiceClassAppId
Unsigned32,
docsQosServiceClassMultiplierContentionReqWindow
Unsigned32,
docsQosServiceClassMultiplierBytesReq
Unsigned32,
docsQosServiceClassMaxReqPerSidCluster
Unsigned32,
docsQosServiceClassMaxOutstandingBytesPerSidCluster
Unsigned32,
docsQosServiceClassMaxTotBytesReqPerSidCluster
Unsigned32,
docsQosServiceClassMaxTimeInSidCluster
Unsigned32,
docsQosServiceClassPeakTrafficRate
Unsigned32,
docsQosServiceClassDsResequencing
INTEGER,
docsQosServiceClassMinimumBuffer
Unsigned32,
docsQosServiceClassTargetBuffer
Unsigned32,
docsQosServiceClassMaximumBuffer
Unsigned32
}
docsQosServiceClassName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key indicates the Service Class Name associated
with this object instance. DOCSIS specifies
that the maximum size is 16 ASCII characters including
a terminating zero. The terminating zero is not
represented in this SnmpAdminString syntax attribute."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Class
Name section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosServiceClassEntry 1 }
docsQosServiceClassStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The conceptual row status of this object."
::= { docsQosServiceClassEntry 3 }
docsQosServiceClassPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the Priority attribute
of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 4 }
docsQosServiceClassMaxTrafficRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the MaxTrafficRate
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 5 }
docsQosServiceClassMaxTrafficBurst OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the MaxTrafficBurst
attribute of the QoS Parameter Set."
DEFVAL { 3044 }
::= { docsQosServiceClassEntry 6 }
docsQosServiceClassMinReservedRate OBJECT-TYPE
SYNTAX BitRate
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the MinReservedRate
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 7 }
docsQosServiceClassMinReservedPkt OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the MinReservedPkt
attribute of the QoS Parameter Set."
::= { docsQosServiceClassEntry 8 }
docsQosServiceClassMaxConcatBurst OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the MaxConcatBurst
attribute of the QoS Parameter Set."
DEFVAL { 1522 }
::= { docsQosServiceClassEntry 9 }
docsQosServiceClassNomPollInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the NomPollInterval
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 10 }
docsQosServiceClassTolPollJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the TolPolJitter
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 11 }
docsQosServiceClassUnsolicitGrantSize OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the UnsolicitGrantSize
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 12 }
docsQosServiceClassNomGrantInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the NomGrantInterval
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 13 }
docsQosServiceClassTolGrantJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the TolGrantJitter
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 14 }
docsQosServiceClassGrantsPerInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
UNITS "dataGrants"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the GrantsPerInterval
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 15 }
docsQosServiceClassMaxLatency OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the MaxLatency
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 16 }
docsQosServiceClassActiveTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the ActiveTimeout
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 17 }
docsQosServiceClassAdmittedTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the AddmitedTimeout
attribute of the QoS Parameter Set."
DEFVAL { 200 }
::= { docsQosServiceClassEntry 18 }
docsQosServiceClassSchedulingType OBJECT-TYPE
SYNTAX SchedulingType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the SchedulingType
attribute of the QoS Parameter Set."
DEFVAL { bestEffort }
::= { docsQosServiceClassEntry 19 }
docsQosServiceClassRequestPolicy OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the ReqPolicyOct
attribute of the QoS Parameter Set."
DEFVAL { '00000000'H }
::= { docsQosServiceClassEntry 20 }
docsQosServiceClassTosAndMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the TosAndMask
attribute of the QoS Parameter Set."
::= { docsQosServiceClassEntry 21 }
docsQosServiceClassTosOrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the TosOrMask attribute
of the QoS Parameter Set."
::= { docsQosServiceClassEntry 22 }
docsQosServiceClassDirection OBJECT-TYPE
SYNTAX IfDirection
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the Direction attribute
of the QoS Parameter Set."
DEFVAL { upstream }
::= { docsQosServiceClassEntry 23 }
docsQosServiceClassStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute defines whether this row is kept in
volatile storage and lost upon reboot or whether
it is backed up by non-volatile or permanent storage.
'permanent' entries need not allow writable access to
any instance attribute."
DEFVAL { nonVolatile }
::= { docsQosServiceClassEntry 24 }
-- Closed by TI for CM MIB compilation.
-- docsQosServiceClassDSCPOverwrite OBJECT-TYPE
-- SYNTAX DscpOrAny
-- MAX-ACCESS read-create
-- STATUS current
-- DESCRIPTION
-- "This attribute allows the overwrite of the DSCP field
-- per RFC 3260.
-- If this attribute is -1, then the corresponding TosAndMask
-- value is set to be 'FF'H and TosOrMask is set to
-- '00'H. Otherwise, this attribute is in the range of 0..63,
-- and the corresponding TosAndMask value is '03'H
-- and TosOrMaskvalue is this attribute value shifted
-- left by two bit positions."
-- DEFVAL { -1 }
-- ::= { docsQosServiceClassEntry 25 }
docsQosServiceClassRequiredAttrMask OBJECT-TYPE
SYNTAX AttributeMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the RequiredAttrMask
attribute of the QoS Parameter Set."
DEFVAL { '00'H }
::= { docsQosServiceClassEntry 26 }
docsQosServiceClassForbiddenAttrMask OBJECT-TYPE
SYNTAX AttributeMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the ForbiddenAttrMask
attribute of the QoS Parameter Set."
DEFVAL { '00'H }
::= { docsQosServiceClassEntry 27 }
docsQosServiceClassAttrAggrRuleMask OBJECT-TYPE
SYNTAX AttrAggrRuleMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the AttrAggregationMask
attribute of the QoS Parameter Set."
DEFVAL { '00000000'H }
::= { docsQosServiceClassEntry 28 }
docsQosServiceClassAppId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the AppId attribute
of the QoS Parameter Set."
::= { docsQosServiceClassEntry 29 }
docsQosServiceClassMultiplierContentionReqWindow OBJECT-TYPE
SYNTAX Unsigned32 (4..12)
UNITS "eighths"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the MultiplierContentionReqWindow
attribute of the QoS Parameter
Set."
DEFVAL { 8 }
::= { docsQosServiceClassEntry 30 }
docsQosServiceClassMultiplierBytesReq OBJECT-TYPE
SYNTAX Unsigned32 (1 | 2 | 4 | 8 | 16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the MultiplierBytesReq
attribute of the QoS Parameter Set."
DEFVAL { 4 }
::= { docsQosServiceClassEntry 31 }
docsQosServiceClassMaxReqPerSidCluster OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "requests"
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This attribute is the template for the MaxReqPerSidCluster
attribute of the QoS Parameter Set.
This attribute has been deprecated and replaced with
docsQosServiceFlowMaxReqPerSidCluster in the
docsQosServiceFlowTable."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 32 }
docsQosServiceClassMaxOutstandingBytesPerSidCluster OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This attribute is the template for the MaxOutstandingBytesPerSidCluster
attribute of the QoS Parameter
Set.
This attribute has been deprecated and replaced with
docsQosServiceFlowMaxOutstandingBytesPerSidCluster in the
docsQosServiceFlowTable."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 33 }
docsQosServiceClassMaxTotBytesReqPerSidCluster OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This attribute is the template for the MaxTotBytesReqPerSidCluster
attribute of the QoS Parameter Set.
This attribute has been deprecated and replaced with
docsQosServiceFlowMaxTotBytesReqPerSidCluster in the
docsQosServiceFlowTable."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 34 }
docsQosServiceClassMaxTimeInSidCluster OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This attribute is the template for the MaxTimeInSidCluster
attribute of the QoS Parameter Set.
This attribute has been deprecated and replaced with
docsQosServiceFlowMaxTimeInSidCluster in the
docsQosServiceFlowTable."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 35 }
docsQosServiceClassPeakTrafficRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the PeakTrafficRate
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 36 }
docsQosServiceClassDsResequencing OBJECT-TYPE
SYNTAX INTEGER {
resequencingDsid(0),
noResequencingDsid(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the DsResequencing
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 37 }
docsQosServiceClassMinimumBuffer OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the MinimumBuffer
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 38 }
docsQosServiceClassTargetBuffer OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the TargetBuffer
attribute of the QoS Parameter Set."
DEFVAL { 0 }
::= { docsQosServiceClassEntry 39 }
docsQosServiceClassMaximumBuffer OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute is the template for the MaximumBuffer
attribute of the QoS Parameter Set."
DEFVAL { 4294967295 }
::= { docsQosServiceClassEntry 40 }
docsQosPHSTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosPHSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes the set of payload header suppression
of Service Flows."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Payload Header
Suppression section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosMibObjects 10}
docsQosPHSEntry OBJECT-TYPE
SYNTAX DocsQosPHSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosPHSTable.
The ifIndex key corresponds to the MAC Domain interface
of the service flow of the classifier that includes this
PHS rule."
INDEX { ifIndex,docsQosServiceFlowId,docsQosPktClassId }
::= { docsQosPHSTable 1 }
DocsQosPHSEntry ::= SEQUENCE {
docsQosPHSField
OCTET STRING,
docsQosPHSMask
OCTET STRING,
docsQosPHSSize
Unsigned32,
docsQosPHSVerify
TruthValue,
docsQosPHSIndex
Unsigned32
}
docsQosPHSField OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the Payload Header suppression
field defines the bytes of the header that must
be suppressed/restored by the sending/receiving
device.
The number of octets in this attribute should be the same
as the value of PHSSize."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Payload Header
Suppression Field (PHSF) section in the Common Radio
Frequency Interface Encodings Annex."
::= { docsQosPHSEntry 2 }
docsQosPHSMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines the bit mask that is used in
combination with the PHSField. It defines which bytes
in the header must be suppressed/restored by the sending
or receiving device.
Each bit of this bit mask corresponds to a byte in the PHSField,
with the least
significant bit corresponding to the first byte of the
PHSField.
Each bit of the bit mask specifies whether the corresponding
byte should be suppressed in the packet. A bit
value of '1' indicates that the byte should be suppressed
by the sending device and restored by the receiving
device.
A bit value of '0' indicates that the byte should not be
suppressed by the sending device or restored by the
receiving device.
If the bit mask does not contain a bit for each byte in the
PHSField, then the bit mask is extended with bit values
of '1' to be the necessary length."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Payload Header
Suppression Mask (PHSM) section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosPHSEntry 3 }
docsQosPHSSize OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies the number of bytes in the
header to be suppressed and restored.
The value of this attribute matches the numberof bytes
in the Field attribute."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Payload Header Suppression
Size (PHSS) section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsQosPHSEntry 4 }
docsQosPHSVerify OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If 'true', this attribute indicates that the sender
must verify that the PHS Field
is the same as the content in the packet to be suppressed."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Payload Header
Suppression Verification (PHSV) section in the Common Radio
Frequency Interface Encodings Annex."
::= { docsQosPHSEntry 5 }
docsQosPHSIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute uniquely references the PHS rule for
a given service flow."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Payload Header
Suppression Index (PHSI) section in the Common Radio
Frequency Interface Encodings Annex."
::= { docsQosPHSEntry 7 }
docsQosCmtsMacToSrvFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosCmtsMacToSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object provides the mapping of unicast service
flows with the cable modem the service flows belongs
to."
::= { docsQosMibObjects 11}
docsQosCmtsMacToSrvFlowEntry OBJECT-TYPE
SYNTAX DocsQosCmtsMacToSrvFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosCmtsMacToSrvFlowTable."
INDEX { docsQosCmtsCmMac,docsQosCmtsServiceFlowId }
::= { docsQosCmtsMacToSrvFlowTable 1 }
DocsQosCmtsMacToSrvFlowEntry ::= SEQUENCE {
docsQosCmtsCmMac
MacAddress,
docsQosCmtsServiceFlowId
Unsigned32,
docsQosCmtsIfIndex
InterfaceIndex
}
docsQosCmtsCmMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents the MAC address for the referenced
CM."
::= { docsQosCmtsMacToSrvFlowEntry 1 }
docsQosCmtsServiceFlowId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents the identifier of the Service
Flow."
::= { docsQosCmtsMacToSrvFlowEntry 2 }
docsQosCmtsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the interface index of
the MAC domain of the Service Flow and where the CableModem
is registered."
::= { docsQosCmtsMacToSrvFlowEntry 3 }
docsQosServiceFlowSidClusterTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowSidClusterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines the SID clusters associated with
an upstream service flow."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Service Flow SID
Cluster Assignments section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsQosMibObjects 12}
docsQosServiceFlowSidClusterEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowSidClusterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosServiceFlowSidClusterTable.
The ifIndex key corresponds to the MAC Domain interface
of the service flow."
INDEX { ifIndex,docsQosServiceFlowId,docsQosServiceFlowSidClusterId,docsQosServiceFlowSidClusterUcid }
::= { docsQosServiceFlowSidClusterTable 1 }
DocsQosServiceFlowSidClusterEntry ::= SEQUENCE {
docsQosServiceFlowSidClusterId
Unsigned32,
docsQosServiceFlowSidClusterUcid
ChId,
docsQosServiceFlowSidClusterSid
Unsigned32
}
docsQosServiceFlowSidClusterId OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents the SID Cluster ID of the SID Cluster."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, SID Cluster ID
section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsQosServiceFlowSidClusterEntry 1 }
docsQosServiceFlowSidClusterUcid OBJECT-TYPE
SYNTAX ChId (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents the upstream Channel ID mapped
to the corresponding SID."
::= { docsQosServiceFlowSidClusterEntry 2 }
docsQosServiceFlowSidClusterSid OBJECT-TYPE
SYNTAX Unsigned32 (1..16383)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the SID assigned to the
upstream channel in this SID Cluster."
::= { docsQosServiceFlowSidClusterEntry 3 }
docsQosGrpServiceFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosGrpServiceFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object provides extensions to the service flow
information for Group Service Flows (GSFs)."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, QoS Support
for Joined IP Multicast Traffic section."
::= { docsQosMibObjects 13}
docsQosGrpServiceFlowEntry OBJECT-TYPE
SYNTAX DocsQosGrpServiceFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosGrpServiceFlowTable.
The ifIndex key corresponds to the MAC Domain interface
of the group service flow."
INDEX { ifIndex,docsQosServiceFlowId }
::= { docsQosGrpServiceFlowTable 1 }
DocsQosGrpServiceFlowEntry ::= SEQUENCE {
docsQosGrpServiceFlowIsDef
TruthValue,
docsQosGrpServiceFlowQosConfigId
Unsigned32,
docsQosGrpServiceFlowNumSess
Unsigned32
}
docsQosGrpServiceFlowIsDef OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates whether the GSF QOS Parameter
Set corresponds to the Default Group Service Flow."
REFERENCE
"DOCSIS 3.0 Operations Support System Interface Specification
CM-SP-OSSIv3.0-I04-070803, Multicast Requirements Annex."
::= { docsQosGrpServiceFlowEntry 1 }
docsQosGrpServiceFlowQosConfigId OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the Group QoS Configuration
(GQC) identifier used of the creation of this GSF.
The value zero indicates that the Service Flow is using
the default service flow."
REFERENCE
"DOCSIS 3.0 Operations Support System Interface Specification
CM-SP-OSSIv3.0-I04-070803, Multicast Requirements Annex."
::= { docsQosGrpServiceFlowEntry 2 }
docsQosGrpServiceFlowNumSess OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "sessions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the number of sessions that
are configured in an aggregated Service Flow. If
this is a single session replication, the value of this
attribute is 1."
REFERENCE
"DOCSIS 3.0 Operations Support System Interface Specification
CM-SP-OSSIv3.0-I04-070803, Multicast Requirements Annex."
::= { docsQosGrpServiceFlowEntry 3 }
docsQosGrpPktClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosGrpPktClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object provides additional packet classification
information for Group Classifier References
(GCRs) in a Group Service Flow (GSF)."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, QoS Support for
Joined IP Multicast Traffic section."
::= { docsQosMibObjects 14}
docsQosGrpPktClassEntry OBJECT-TYPE
SYNTAX DocsQosGrpPktClassEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosGrpPktClassTable.
The ifIndex key corresponds to the MAC Domain interface of the
service flow of this group classifier."
INDEX { ifIndex,docsQosServiceFlowId,docsQosPktClassId }
::= { docsQosGrpPktClassTable 1 }
DocsQosGrpPktClassEntry ::= SEQUENCE {
docsQosGrpPktClassGrpConfigId
Unsigned32
}
docsQosGrpPktClassGrpConfigId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the GC identifier used of
the creation of this GSF."
REFERENCE
"DOCSIS 3.0 Operations Support System Interface Specification
CM-SP-OSSIv3.0-I04-070803, Multicast Requirements Annex."
::= { docsQosGrpPktClassEntry 1 }
docsQosUpChCounterExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosUpChCounterExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object provides extensions for service flow
statistics for fragmentation for channel bonding."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Channel
Bonding section."
::= { docsQosMibObjects 15}
docsQosUpChCounterExtEntry OBJECT-TYPE
SYNTAX DocsQosUpChCounterExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosUpChCounterExtTable.
The ifIndex key corresponds to the upstream Channel Interface
of the service flow."
INDEX { ifIndex }
::= { docsQosUpChCounterExtTable 1 }
DocsQosUpChCounterExtEntry ::= SEQUENCE {
docsQosUpChCounterExtSgmtValids
Counter32,
docsQosUpChCounterExtSgmtDiscards
Counter32
}
docsQosUpChCounterExtSgmtValids OBJECT-TYPE
SYNTAX Counter32
UNITS "segments"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the total number segments
processed on this channel. Discontinuities in the
value of this counter can occur at reinitialization
of the managed system, and at other times as indicated
by the value of ifCounterDiscontinuityTime of the
associated MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Upstream and
Downstream Common Aspects section; [RFC 2863]."
::= { docsQosUpChCounterExtEntry 1 }
docsQosUpChCounterExtSgmtDiscards OBJECT-TYPE
SYNTAX Counter32
UNITS "segments"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the total number of discarded
segments on this channel due to segment HCS problems.
Discontinuities in the value of this counter
can occur at reinitialization of the managed system,
and at other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Continuous
Concatenation and Fragmentation section;[RFC 2863]."
::= { docsQosUpChCounterExtEntry 2 }
docsQosServiceFlowCcfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosServiceFlowCcfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object provides upstream service flow statistics
for Continous Concatenation and Fragmentation
(CCF).
The CMTS MAY not instantate this object for service flows
that do not use CCF or return the zero value on individual
counter's statistics."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Continuous
Concatenation and Fragmentation section."
::= { docsQosMibObjects 16}
docsQosServiceFlowCcfStatsEntry OBJECT-TYPE
SYNTAX DocsQosServiceFlowCcfStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosServiceFlowCcfStatsTable.
The ifIndex key corresponds to the MAC Domain interface
of the service flow."
INDEX { ifIndex,docsQosServiceFlowId }
::= { docsQosServiceFlowCcfStatsTable 1 }
DocsQosServiceFlowCcfStatsEntry ::= SEQUENCE {
docsQosServiceFlowCcfStatsSgmtValids
Counter32,
docsQosServiceFlowCcfStatsSgmtLost
Counter32
}
docsQosServiceFlowCcfStatsSgmtValids OBJECT-TYPE
SYNTAX Counter32
UNITS "segments"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of segments counted
on this service flow regardless of whether the
fragment was correctly reassembled into valid packets.
Discontinuities in the value of this counter can
occur at reinitialization of the managed system, and
at other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Continuous
Concatenation and Fragmentation section; [RFC 2863]."
::= { docsQosServiceFlowCcfStatsEntry 1 }
docsQosServiceFlowCcfStatsSgmtLost OBJECT-TYPE
SYNTAX Counter32
UNITS "segments"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the number of segments which
the CMTS segment reassembly function determines were
lost. Discontinuities in the value of this counter
can occur at reinitialization of the managed system,
and at other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Continuous
Concatenation and Fragmentation section; [RFC 2863]."
::= { docsQosServiceFlowCcfStatsEntry 2 }
docsQosCmServiceUsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosCmServiceUsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines DOCSIS MAC services primitive
statistics of upstream service flows. In pre-3.0 DOCSIS
devices this statistics exists per SID for either
Cos or Qos services in the SNMP table docsIfCmServiceTable.
A 3.0 CM with CoS configuration (DOCSIS 1.0 mode) reports
the statistics defined in the SNMP table docsIfCmServiceTable.
A 3.0 CM with QoS configuration reports
this object regardless of whether Multiple Transmit
Channel is enabled or disabled."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Upstream Data
Transmission section."
::= { docsQosMibObjects 17}
docsQosCmServiceUsStatsEntry OBJECT-TYPE
SYNTAX DocsQosCmServiceUsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosCmServiceUsStatsTable.
The ifIndex key corresponds to the MAC Domain interface
of the service flow."
INDEX { ifIndex,docsQosServiceFlowId }
::= { docsQosCmServiceUsStatsTable 1 }
DocsQosCmServiceUsStatsEntry ::= SEQUENCE {
docsQosCmServiceUsStatsTxSlotsImmed
Counter32,
docsQosCmServiceUsStatsTxSlotsDed
Counter32,
docsQosCmServiceUsStatsTxRetries
Counter32,
docsQosCmServiceUsStatsTxExceededs
Counter32,
docsQosCmServiceUsStatsRqRetries
Counter32,
docsQosCmServiceUsStatsRqExceededs
Counter32,
docsQosCmServiceUsStatsSgmts
Counter32
}
docsQosCmServiceUsStatsTxSlotsImmed OBJECT-TYPE
SYNTAX Counter32
UNITS "mini-slots"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of upstream mini-slots
which have been used to transmit data PDUs in
immediate (contention) mode. This includes only those
PDUs that are presumed to have arrived at the head-end
(i.e., those which were explicitly acknowledged.)
It does not include retransmission attempts or
mini-slots used by Requests. Discontinuities in the
value of this counter can occur at reinitialization
of the managed system, and at other times as indicated
by the value of ifCounterDiscontinuityTime of the
associated MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Upstream
Bandwidth Allocation section; [RFC 2863]."
::= { docsQosCmServiceUsStatsEntry 1 }
docsQosCmServiceUsStatsTxSlotsDed OBJECT-TYPE
SYNTAX Counter32
UNITS "mini-slots"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of upstream mini-slots
which have been used to transmit data PDUs in
dedicated mode (i.e., as a result of a unicast Data Grant).
Discontinuities in the value of this counter
can occur at reinitialization of the managed system,
and at other times as indicated by the value of
ifCounterDiscontinuityTime of the associated MAC Domain
interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Upstream Data
Transmission section; [RFC 2863]."
::= { docsQosCmServiceUsStatsEntry 2 }
docsQosCmServiceUsStatsTxRetries OBJECT-TYPE
SYNTAX Counter32
UNITS "attempts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of attempts to
transmit data PDUs containing requests for acknowledgment
that did not result in acknowledgment. Discontinuities
in the value of this counter can occur at
reinitialization of the managed system, and at other
times as indicated by the value of ifCounterDiscontinuityTime
for the associated MAC Domain interface
index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Upstream Bandwidth
Allocation section; [RFC 2863]."
::= { docsQosCmServiceUsStatsEntry 3 }
docsQosCmServiceUsStatsTxExceededs OBJECT-TYPE
SYNTAX Counter32
UNITS "attempts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of attempts to
transmit bandwidth requests which did not result in
acknowledgment. Discontinuities in the value of this
counter can occur at reinitialization of the managed
system, and at other times as indicated by the value
of ifCounterDiscontinuityTime of the associated
MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Upstream Bandwidth
Allocation section; [RFC 2863]."
::= { docsQosCmServiceUsStatsEntry 4 }
docsQosCmServiceUsStatsRqRetries OBJECT-TYPE
SYNTAX Counter32
UNITS "attempts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of attempts to
transmit bandwidth requests which did not result in
acknowledgment. Discontinuities in the value of this
counter can occur at reinitialization of the managed
system, and at other times as indicated by the value
of ifCounterDiscontinuityTime of the associated
MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Upstream
Bandwidth Allocation section; [RFC 2863]."
::= { docsQosCmServiceUsStatsEntry 5 }
docsQosCmServiceUsStatsRqExceededs OBJECT-TYPE
SYNTAX Counter32
UNITS "attempts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of requests for
bandwidth which failed due to excessive retries without
acknowledgment. Discontinuities in the value
of this counter can occur at reinitialization of the
managed system, and at other times as indicated by the
value of ifCounterDiscontinuityTime of the associated
MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Upstream Bandwidth
Allocation section; [RFC 2863]."
::= { docsQosCmServiceUsStatsEntry 6 }
docsQosCmServiceUsStatsSgmts OBJECT-TYPE
SYNTAX Counter32
UNITS "segments"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute contains the number of segments sent
on this service flow. Discontinuities in the value
of this counter can occur at reinitialization of the
managed system, and at other times as indicated by the
value of ifCounterDiscontinuityTime of the associated
MAC Domain interface index."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Upstream and
Downstream Common Aspects section; RFC 2863."
::= { docsQosCmServiceUsStatsEntry 7 }
docsQosCmtsDsidTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosCmtsDsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes DSID information stored in
the CMTS.
The CMTS reports the current status of existing DSIDs.
When a DSID is created during the registration process
or a DBC transaction, a corresponding object instance
is created. If a DSID is deleted or changed via
a DBC message the corresponding object instance is deleted
or updated respectively."
::= { docsQosMibObjects 18}
docsQosCmtsDsidEntry OBJECT-TYPE
SYNTAX DocsQosCmtsDsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosCmtsDsidTable.
The ifIndex key corresponds to the MAC Domain interface
of the DSID."
INDEX { ifIndex,docsQosCmtsDsidDsid }
::= { docsQosCmtsDsidTable 1 }
DocsQosCmtsDsidEntry ::= SEQUENCE {
docsQosCmtsDsidDsid
Dsid,
docsQosCmtsDsidUsage
BITS,
docsQosCmtsDsidDsChSet
ChSetId,
docsQosCmtsDsidReseqWaitTime
Unsigned32,
docsQosCmtsDsidReseqWarnThrshld
Unsigned32,
docsQosCmtsDsidStatusHldoffTimerSeqOutOfRng
Unsigned32,
docsQosCmtsDsidCurrentSeqNum
Unsigned32
}
docsQosCmtsDsidDsid OBJECT-TYPE
SYNTAX Dsid
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents the DSID."
::= { docsQosCmtsDsidEntry 1 }
docsQosCmtsDsidUsage OBJECT-TYPE
SYNTAX BITS {
resequencing(0),
multicastCapable(1),
multicastReplication(2),
bonding(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the properties of the DSID.
The bits are defined as follows:
'resequencing' This bit is set to 1 for a Resequencing
DSID.
'multicastCapable' This bit is set to 1 for a DSID that
is capable of transporting multicast traffic (i.e.,
the DSID has multicast forwarding attributes).
'multicastReplication' This bit is set to 1 for a DSID
that is used for transporting a multicast replication
(i.e. there is a corresponding instance of the MulticastRepl
object).
'bonding' This bit is set to a 1 for a DSID that is associated
with a bonding group."
REFERENCE
"DOCSIS 3.0 Operations Support System Interface Specification
CM-SP-OSSIv3.0-I04-070803, Multicast Requirements Annex.
DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, DSID Encodings section
in the Common Radio Frequency Interface Encodings Annex."
::= { docsQosCmtsDsidEntry 2 }
docsQosCmtsDsidDsChSet OBJECT-TYPE
SYNTAX ChSetId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the Downstream Channel
Set over which the DSID is being resequenced."
::= { docsQosCmtsDsidEntry 3 }
docsQosCmtsDsidReseqWaitTime OBJECT-TYPE
SYNTAX Unsigned32 (1..180)
UNITS "hundredMicroseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the DSID Resequencing
Wait Time that is used for this DSID. This attribute is
only valid when the Usage attribute has the resequencing
bit set to 1. This attribute returns a value of 0
when the Usage attribute has the resequencing bit set
to 0."
::= { docsQosCmtsDsidEntry 4 }
docsQosCmtsDsidReseqWarnThrshld OBJECT-TYPE
SYNTAX Unsigned32 (0..179)
UNITS "hundredMicroseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the DSID Resequencing
Warning Threshold that is used for this DSID. The value
of 0 indicates that the threshold warnings are disabled.
This attribute is only valid when the Usage attribute
has the resequencing bit set to 1. This attribute
returns a value of 0 when the Usage attribute has
the resequencing bit set to 0."
::= { docsQosCmtsDsidEntry 5 }
docsQosCmtsDsidStatusHldoffTimerSeqOutOfRng OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "20milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the hold-off timer for
reporting Out-of-Range Events via the CM-STATUS MAC
Management message. This attribute is only valid when
the Usage attribute has the resequencing bit set
to 1. This attribute returns a value of 0 when the Usage
attribute has the resequencing bit set to 0."
::= { docsQosCmtsDsidEntry 6 }
docsQosCmtsDsidCurrentSeqNum OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports the value of the most recent
sequence number assigned by the CMTS for this DSID.
This attribute is only valid when the Usage attribute
has the resequencing bit set to 1. This attribute returns
a value of 0 when the Usage attribute has the resequencing
bit set to 0."
::= { docsQosCmtsDsidEntry 7 }
docsQosCmtsDebugDsidTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosCmtsDebugDsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CMTS Debug DSID object contains the control of
DSID debug statistics reporting
An instance in this object defines the DSID and MAC domain
to which the CmtsDebugDsidStats collects statistics
for the downstream channel associated with that
DSID and MAC Domain. The deletion of an instance stops
the reporting of statistics for the specified DSID.
This object supports instance creation and deletion.
The CMTS MUST support at least one instance of this object."
::= { docsQosMibObjects 19}
docsQosCmtsDebugDsidEntry OBJECT-TYPE
SYNTAX DocsQosCmtsDebugDsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosCmtsDebugDsidTable.
The ifIndex key corresponds to the MAC Domain interface
of the DSID."
INDEX { ifIndex,docsQosCmtsDebugDsidDsid }
::= { docsQosCmtsDebugDsidTable 1 }
DocsQosCmtsDebugDsidEntry ::= SEQUENCE {
docsQosCmtsDebugDsidDsid
Dsid,
docsQosCmtsDebugDsidRowStatus
RowStatus
}
docsQosCmtsDebugDsidDsid OBJECT-TYPE
SYNTAX Dsid
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute represents the DSID value to be debugged,
identified by the IfIndex attribute of this object."
::= { docsQosCmtsDebugDsidEntry 1 }
docsQosCmtsDebugDsidRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The conceptual row status of this object."
::= { docsQosCmtsDebugDsidEntry 2 }
docsQosCmtsDebugDsidStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosCmtsDebugDsidStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CMTS Debug DSID Stats object describes statistics
at the CMTS for the forwarding of DSID-labeled downstream
packets.
The CMTS creates an instance for every combination of
MAC Domain, DSID value, and downstream channel on which
packets labeled with that DSID are transmitted.
The CMTS does not delete such instances while the corresponding
CmtsDebug object control instance exists."
::= { docsQosMibObjects 20}
docsQosCmtsDebugDsidStatsEntry OBJECT-TYPE
SYNTAX DocsQosCmtsDebugDsidStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosCmtsDebugDsidStatsTable.
The ifIndex key corresponds to the MAC Domain interface
of the DSID."
INDEX { ifIndex,docsQosCmtsDebugDsidDsid,docsQosCmtsDebugDsidStatsDsIfIndex }
::= { docsQosCmtsDebugDsidStatsTable 1 }
DocsQosCmtsDebugDsidStatsEntry ::= SEQUENCE {
docsQosCmtsDebugDsidStatsDsIfIndex
InterfaceIndex,
docsQosCmtsDebugDsidStatsDsidPackets
Counter64,
docsQosCmtsDebugDsidStatsDsidOctets
Counter64
}
docsQosCmtsDebugDsidStatsDsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents an interface index of a downstream
channel that belongs to the DSID"
::= { docsQosCmtsDebugDsidStatsEntry 1 }
docsQosCmtsDebugDsidStatsDsidPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is a counter which contains the number
of packets transmitted by the CMTS which are labeled
with the DSID on the downstream channel. Discontinuities in
the value of this counter can occur as indicated by the value
of ifCounterDiscontinuityTime of the associated Downstream
interface index."
::= { docsQosCmtsDebugDsidStatsEntry 2 }
docsQosCmtsDebugDsidStatsDsidOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the number of bytes transmitted
by the CMTS which are labeled with the DSID on the
downstream interface. Discontinuities in the value of
this counter can occur as indicated by the value of
ifCounterDiscontinuityTime of the associated Downstream
interface index."
::= { docsQosCmtsDebugDsidStatsEntry 3 }
docsQosCmDsidTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosCmDsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When a DSID is created, during the registration process
or a DBC transaction,. The CM reports the current
status of existing DSID, for example, if a DSID is deleted
or changed via DBC messages the corresponding
object instance is deleted or updated respectively."
::= { docsQosMibObjects 21}
docsQosCmDsidEntry OBJECT-TYPE
SYNTAX DocsQosCmDsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosCmDsidTable
The ifIndex key corresponds to the MAC Domain interface
of the DSID."
INDEX { ifIndex,docsQosCmDsidDsid }
::= { docsQosCmDsidTable 1 }
DocsQosCmDsidEntry ::= SEQUENCE {
docsQosCmDsidDsid
Dsid,
docsQosCmDsidUsage
BITS,
docsQosCmDsidNumReseqChs
Unsigned32,
docsQosCmDsidReseqChList
ChannelList,
docsQosCmDsidReseqWaitTime
Unsigned32,
docsQosCmDsidReseqWarnThrshld
Unsigned32,
docsQosCmDsidStatusHldoffTimerSeqOutOfRng
Unsigned32,
docsQosCmDsidOutOfRangeDiscards
Unsigned32,
docsQosCmDsidNextExpectedSeqNum
Unsigned32,
docsQosCmDsidCmInterfaceMask
DocsL2vpnIfList,
docsQosCmDsidFwdCmInterfaceMask
DocsL2vpnIfList
}
docsQosCmDsidDsid OBJECT-TYPE
SYNTAX Dsid
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents the DSID."
::= { docsQosCmDsidEntry 1 }
docsQosCmDsidUsage OBJECT-TYPE
SYNTAX BITS {
resequencing(0),
multicastCapable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the properties of the DSID.
The bits are defined as follows:
'resequencing' : This bit is set to 1 for a Resequencing
DSID.
'multicastCapable' : This bit is set to 1 for a DSID that
is capable of transporting multicast traffic (e.g.,
the DSID has multicast forwarding attributes)."
::= { docsQosCmDsidEntry 2 }
docsQosCmDsidNumReseqChs OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the number of channels
in the downstream resequencing channel list for this
DSID. When a DSID is used only for a non-bonded
Multicast replication, this object returns a value of 0."
::= { docsQosCmDsidEntry 3 }
docsQosCmDsidReseqChList OBJECT-TYPE
SYNTAX ChannelList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the Downstream Channel
Set over which the DSID is being resequenced."
::= { docsQosCmDsidEntry 4 }
docsQosCmDsidReseqWaitTime OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..180)
UNITS "hundredMicroseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the DSID Resequencing
Wait Time that is used for this DSID. This attribute is
only valid when the Usage attribute has the resequencing
bit set to 1. This attribute returns a value of 0
when the Usage attribute has the resequencing bit set
to 0."
::= { docsQosCmDsidEntry 5 }
docsQosCmDsidReseqWarnThrshld OBJECT-TYPE
SYNTAX Unsigned32 (0..179)
UNITS "hundredMicroseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the DSID Resequencing
Warning Threshold that is used for this DSID. The value
of 0 indicates that the threshold warnings are disabled.
This attribute is only valid when the Usage attribute
has the resequencing bit set to 1. This attribute
returns a value of 0 when the Usage attribute has
the resequencing bit set to 0."
::= { docsQosCmDsidEntry 6 }
docsQosCmDsidStatusHldoffTimerSeqOutOfRng OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "20milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the hold-off timer for
reporting Out-of-Range Events via the CM-STATUS MAC
Management message. This attribute is only valid when
the Usage attribute has the resequencing bit set
to 1. This attribute returns a value of 0 when the Usage
attribute has the resequencing bit set to 0."
::= { docsQosCmDsidEntry 7 }
docsQosCmDsidOutOfRangeDiscards OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the current count of out-of-range
packets discarded by the CM for a given resequencing context
since an in-range packet was received. When this count exceeds
1000 and more than two minutes have elapsed since an in-range
packet was received, the CM will reacquire sequence numbers for
this resequencing context."
::= { docsQosCmDsidEntry 8 }
docsQosCmDsidNextExpectedSeqNum OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the Next Expected Packet
Sequence Number for a given resequencing context.
This attribute is only valid when the Usage attribute
has the resequencing bit set to 1. This attribute returns
a value of 0 when the Usage attribute has the resequencing
bit set to 0."
::= { docsQosCmDsidEntry 9 }
docsQosCmDsidCmInterfaceMask OBJECT-TYPE
SYNTAX DocsL2vpnIfList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the bitmap of the interfaces
communicated to the CM in a Multicast DSID encoding."
::= { docsQosCmDsidEntry 10 }
docsQosCmDsidFwdCmInterfaceMask OBJECT-TYPE
SYNTAX DocsL2vpnIfList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the bitmap of the interfaces
to which the CM forwards multicast traffic: a logical
OR of interfaces identified in CmInterfaceMask
and interfaces associated with the client MAC addresses
identified in the docsDevCmDsidMac instances
for this DSID."
::= { docsQosCmDsidEntry 11 }
docsQosCmDsidStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosCmDsidStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines a set of statistics the CM collects
per Dsid."
::= { docsQosMibObjects 22}
docsQosCmDsidStatsEntry OBJECT-TYPE
SYNTAX DocsQosCmDsidStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosCmDsidStatsTable."
INDEX { docsQosCmDsidStatsDsid }
::= { docsQosCmDsidStatsTable 1 }
DocsQosCmDsidStatsEntry ::= SEQUENCE {
docsQosCmDsidStatsDsid
Dsid,
docsQosCmDsidStatsSeqNumMissing
Counter32,
docsQosCmDsidStatsSkewThreshExceeds
Counter32,
docsQosCmDsidStatsOutOfRangePackets
Counter32,
docsQosCmDsidStatsNumPackets
Counter64
}
docsQosCmDsidStatsDsid OBJECT-TYPE
SYNTAX Dsid
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents the interface index of the MAC
Domain associated with the DSID."
::= { docsQosCmDsidStatsEntry 1 }
docsQosCmDsidStatsSeqNumMissing OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the number of times the Next Expected
Packet Sequence Number is declared lost. In this case one or
more data packets are lost. This is generally caused by
downstream packet loss."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Downstream
Sequencing section."
::= { docsQosCmDsidStatsEntry 2 }
docsQosCmDsidStatsSkewThreshExceeds OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts in-range sequenced packets
which were successfully received by the CM after a wait
time longer than the Resequencing Warning Threshold."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Skew Requirements
section."
::= { docsQosCmDsidStatsEntry 3 }
docsQosCmDsidStatsOutOfRangePackets OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the number of packets Counter
received in a DSID reassembly context where the sequence
number which is out of range."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, Receive Channels
section."
::= { docsQosCmDsidStatsEntry 4 }
docsQosCmDsidStatsNumPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the total number of data packets
of a DSID context forwarded for further processing."
::= { docsQosCmDsidStatsEntry 5 }
docsQosCmDsidClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosCmDsidClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains the client MAC addresses that
the CMTS requests that the CM uses to replicate Multicast
DSIDs during registration or during a DBC transaction.
When a DSID is created that includes client MAC addresses,
or when client MAC addresses are added to a DSID,
new rows are created to indicate the added client MAC
addresses. When a Client MAC address is deleted from
a DSID, the corresponding row is deleted. When a DSID
is deleted, all corresponding rows are deleted, too."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I05-070803, DSID Encodings
section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsQosMibObjects 23}
docsQosCmDsidClientEntry OBJECT-TYPE
SYNTAX DocsQosCmDsidClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsQosCmDsidClientTable."
INDEX { docsQosCmDsidClientDsid,docsQosCmDsidClientClientMacId }
::= { docsQosCmDsidClientTable 1 }
DocsQosCmDsidClientEntry ::= SEQUENCE {
docsQosCmDsidClientDsid
Dsid,
docsQosCmDsidClientClientMacId
Unsigned32,
docsQosCmDsidClientClientMacAddr
MacAddress
}
docsQosCmDsidClientDsid OBJECT-TYPE
SYNTAX Dsid
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key defines the DSID that the client MAC addresses
are associated with."
::= { docsQosCmDsidClientEntry 1 }
docsQosCmDsidClientClientMacId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key defines a uniquely identified Client Mac
Addresses associated with the DSID."
::= { docsQosCmDsidClientEntry 2 }
docsQosCmDsidClientClientMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute defines a client MAC address to which
Multicast traffic labeled with this DSID should be
forwarded."
::= { docsQosCmDsidClientEntry 3 }
docsQosMibConformance OBJECT IDENTIFIER ::= { docsQosMib 2 }
docsQosMibCompliances OBJECT IDENTIFIER ::= { docsQosMibConformance 1 }
docsQosMibGroups OBJECT IDENTIFIER ::= { docsQosMibConformance 2 }
docsQosCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement of managed objects common for Cable Modem
Termination Sytems (CMTS) and Cable Modems (CM)."
MODULE -- this MODULE
MANDATORY-GROUPS {
docsQosBaseGroup
}
GROUP docsQosCmtsGroup
DESCRIPTION
"This group is mandatory for Cable Modem Termination
Systems (CMTS) and is not implemented for Cable Modems
(CM)."
GROUP docsQosCmGroup
DESCRIPTION
"This group is mandatory for Cable Modems (CM)TS) and is
not implemented for Cable Modems Termination Systems (CMTS)."
::= { docsQosMibCompliances 1 }
docsQosBaseGroup OBJECT-GROUP
OBJECTS {
docsQosPktClassDirection,
docsQosPktClassPriority,
docsQosPktClassIpTosLow,
docsQosPktClassIpTosHigh,
docsQosPktClassIpTosMask,
docsQosPktClassIpProtocol,
docsQosPktClassIpSourceAddr,
docsQosPktClassIpSourceMask,
docsQosPktClassIpDestAddr,
docsQosPktClassIpDestMask,
docsQosPktClassSourcePortStart,
docsQosPktClassSourcePortEnd,
docsQosPktClassDestPortStart,
docsQosPktClassDestPortEnd,
docsQosPktClassDestMacAddr,
docsQosPktClassDestMacMask,
docsQosPktClassSourceMacAddr,
docsQosPktClassEnetProtocolType,
docsQosPktClassEnetProtocol,
docsQosPktClassUserPriLow,
docsQosPktClassUserPriHigh,
docsQosPktClassVlanId,
docsQosPktClassState,
docsQosPktClassPkts,
docsQosPktClassBitMap,
docsQosPktClassIpAddrType,
docsQosPktClassFlowLabel,
docsQosPktClassCmInterfaceMask,
docsQosPktClassIcmpTypeLow,
docsQosPktClassIcmpTypeHigh,
docsQosParamSetServiceClassName,
docsQosParamSetPriority,
docsQosParamSetMaxTrafficRate,
docsQosParamSetMaxTrafficBurst,
docsQosParamSetMinReservedRate,
docsQosParamSetMinReservedPkt,
docsQosParamSetActiveTimeout,
docsQosParamSetAdmittedTimeout,
docsQosParamSetMaxConcatBurst,
docsQosParamSetSchedulingType,
docsQosParamSetNomPollInterval,
docsQosParamSetTolPollJitter,
docsQosParamSetUnsolicitGrantSize,
docsQosParamSetNomGrantInterval,
docsQosParamSetTolGrantJitter,
docsQosParamSetGrantsPerInterval,
docsQosParamSetTosAndMask,
docsQosParamSetTosOrMask,
docsQosParamSetMaxLatency,
docsQosParamSetRequestPolicyOct,
docsQosParamSetRequiredAttrMask,
docsQosParamSetForbiddenAttrMask,
docsQosParamSetAttrAggrRuleMask,
docsQosParamSetAppId,
docsQosParamSetMultiplierContentionReqWindow,
docsQosParamSetMultiplierBytesReq,
docsQosParamSetPeakTrafficRate,
docsQosParamSetDsResequencing,
docsQosParamSetBitMap,
docsQosParamSetMinimumBuffer,
docsQosParamSetTargetBuffer,
docsQosParamSetMaximumBuffer,
docsQosServiceFlowSID,
docsQosServiceFlowDirection,
docsQosServiceFlowPrimary,
docsQosServiceFlowParamSetTypeStatus,
docsQosServiceFlowChSetId,
docsQosServiceFlowAttrAssignSuccess,
docsQosServiceFlowDsid,
docsQosServiceFlowMaxReqPerSidCluster,
docsQosServiceFlowMaxOutstandingBytesPerSidCluster,
docsQosServiceFlowMaxTotBytesReqPerSidCluster,
docsQosServiceFlowMaxTimeInSidCluster,
docsQosServiceFlowBufferSize,
docsQosServiceFlowPkts,
docsQosServiceFlowOctets,
docsQosServiceFlowTimeCreated,
docsQosServiceFlowTimeActive,
docsQosServiceFlowPHSUnknowns,
docsQosServiceFlowPolicedDropPkts,
docsQosServiceFlowPolicedDelayPkts,
docsQosDSAReqs,
docsQosDSARsps,
docsQosDSAAcks,
docsQosDSCReqs,
docsQosDSCRsps,
docsQosDSCAcks,
docsQosDSDReqs,
docsQosDSDRsps,
docsQosDynamicAdds,
docsQosDynamicAddFails,
docsQosDynamicChanges,
docsQosDynamicChangeFails,
docsQosDynamicDeletes,
docsQosDynamicDeleteFails,
docsQosDCCReqs,
docsQosDCCRsps,
docsQosDCCAcks,
docsQosDCCs,
docsQosDCCFails,
docsQosDCCRspDeparts,
docsQosDCCRspArrives,
docsQosDCCRspDeparts,
docsQosDCCRspArrives,
docsQosDbcReqs,
docsQosDbcRsps,
docsQosDbcAcks,
docsQosDbcSuccesses,
docsQosDbcFails,
docsQosDbcPartial,
docsQosServiceFlowSidClusterSid
}
STATUS current
DESCRIPTION
"Group of objects implemented in both CM and CMTS."
::= { docsQosMibGroups 1 }
docsQosCmtsGroup OBJECT-GROUP
OBJECTS {
docsQosUpstreamFragments,
docsQosUpstreamFragDiscards,
docsQosUpstreamConcatBursts,
docsQosServiceFlowLogIfIndex,
docsQosServiceFlowLogSFID,
docsQosServiceFlowLogCmMac,
docsQosServiceFlowLogPkts,
docsQosServiceFlowLogOctets,
docsQosServiceFlowLogTimeDeleted,
docsQosServiceFlowLogTimeCreated,
docsQosServiceFlowLogTimeActive,
docsQosServiceFlowLogDirection,
docsQosServiceFlowLogPrimary,
docsQosServiceFlowLogServiceClassName,
docsQosServiceFlowLogPolicedDropPkts,
docsQosServiceFlowLogPolicedDelayPkts,
docsQosServiceFlowLogControl,
docsQosServiceClassStatus,
docsQosServiceClassPriority,
docsQosServiceClassMaxTrafficRate,
docsQosServiceClassMaxTrafficBurst,
docsQosServiceClassMinReservedRate,
docsQosServiceClassMinReservedPkt,
docsQosServiceClassMaxConcatBurst,
docsQosServiceClassNomPollInterval,
docsQosServiceClassTolPollJitter,
docsQosServiceClassUnsolicitGrantSize,
docsQosServiceClassNomGrantInterval,
docsQosServiceClassTolGrantJitter,
docsQosServiceClassGrantsPerInterval,
docsQosServiceClassMaxLatency,
docsQosServiceClassActiveTimeout,
docsQosServiceClassAdmittedTimeout,
docsQosServiceClassSchedulingType,
docsQosServiceClassRequestPolicy,
docsQosServiceClassTosAndMask,
docsQosServiceClassTosOrMask,
docsQosServiceClassDirection,
docsQosServiceClassStorageType,
-- Closed by TI for CM MIB compilation.
-- docsQosServiceClassDSCPOverwrite,
docsQosServiceClassRequiredAttrMask,
docsQosServiceClassForbiddenAttrMask,
docsQosServiceClassAttrAggrRuleMask,
docsQosServiceClassAppId,
docsQosServiceClassMultiplierContentionReqWindow,
docsQosServiceClassMultiplierBytesReq,
docsQosServiceClassPeakTrafficRate,
docsQosServiceClassDsResequencing,
docsQosServiceClassMinimumBuffer,
docsQosServiceClassTargetBuffer,
docsQosServiceClassMaximumBuffer,
docsQosCmtsIfIndex,
docsQosGrpServiceFlowIsDef,
docsQosGrpServiceFlowQosConfigId,
docsQosGrpServiceFlowNumSess,
docsQosGrpPktClassGrpConfigId,
docsQosUpChCounterExtSgmtValids,
docsQosUpChCounterExtSgmtDiscards,
docsQosServiceFlowCcfStatsSgmtValids,
docsQosServiceFlowCcfStatsSgmtLost,
docsQosCmtsDsidUsage,
docsQosCmtsDsidDsChSet,
docsQosCmtsDsidReseqWaitTime,
docsQosCmtsDsidReseqWarnThrshld,
docsQosCmtsDsidStatusHldoffTimerSeqOutOfRng,
docsQosCmtsDsidCurrentSeqNum,
docsQosCmtsDebugDsidRowStatus,
docsQosCmtsDebugDsidStatsDsidPackets,
docsQosCmtsDebugDsidStatsDsidOctets
}
STATUS current
DESCRIPTION
"Group of objects implemented in the CMTS only."
::= { docsQosMibGroups 2 }
docsQosCmGroup OBJECT-GROUP
OBJECTS {
docsQosCmServiceUsStatsTxSlotsImmed,
docsQosCmServiceUsStatsTxSlotsDed,
docsQosCmServiceUsStatsTxRetries,
docsQosCmServiceUsStatsTxExceededs,
docsQosCmServiceUsStatsRqRetries,
docsQosCmServiceUsStatsRqExceededs,
docsQosCmServiceUsStatsSgmts,
docsQosCmDsidUsage,
docsQosCmDsidNumReseqChs,
docsQosCmDsidReseqChList,
docsQosCmDsidReseqWaitTime,
docsQosCmDsidReseqWarnThrshld,
docsQosCmDsidStatusHldoffTimerSeqOutOfRng,
docsQosCmDsidOutOfRangeDiscards,
docsQosCmDsidNextExpectedSeqNum,
docsQosCmDsidCmInterfaceMask,
docsQosCmDsidFwdCmInterfaceMask,
docsQosCmDsidStatsSeqNumMissing,
docsQosCmDsidStatsSkewThreshExceeds,
docsQosCmDsidStatsOutOfRangePackets,
docsQosCmDsidStatsNumPackets,
docsQosCmDsidClientClientMacAddr
}
STATUS current
DESCRIPTION
"Group of objects implemented in the CM only."
::= { docsQosMibGroups 3 }
END
View Git Blame Copy Permalink