1753 lines
60 KiB
Plaintext
1753 lines
60 KiB
Plaintext
-- *******************************************************************
|
|
-- QTECH-WLAN-FIT-AP-IN-MIB.mib : Qtech MIB
|
|
-- May 2010, ruanyucheng
|
|
--
|
|
-- Copyright (c) 2010 by Qtech Networks Co.,Ltd.
|
|
-- All rights reserved.
|
|
-- *******************************************************************
|
|
QTECH-WLAN-FIT-AP-IN-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Integer32,
|
|
Counter32,
|
|
IpAddress,
|
|
TimeTicks,
|
|
Unsigned32
|
|
FROM SNMPv2-SMI
|
|
TruthValue,
|
|
DisplayString,
|
|
MacAddress,
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
Gauge
|
|
FROM RFC1155-SMI
|
|
MODULE-COMPLIANCE,
|
|
NOTIFICATION-GROUP,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
qtechStaMacAddr,
|
|
qtechApApName,
|
|
qtechApCfgRadioId,
|
|
qtechApMacAddr,
|
|
qtechApgWlanId
|
|
FROM QTECH-AC-MGMT-MIB
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
qtechMgmt
|
|
FROM QTECH-SMI;
|
|
--*******************************************
|
|
--* module definition
|
|
--*******************************************
|
|
qtechFitApMibModule MODULE-IDENTITY
|
|
LAST-UPDATED "201002260000Z"
|
|
ORGANIZATION
|
|
"Qtech Networks Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Tel: 4008-111-000
|
|
E-mail: service@qtech.com.cn "
|
|
|
|
DESCRIPTION
|
|
"
|
|
Wlan software private MIB for Qtech SNC according to the China
|
|
Mobile standard. This is device manage MIB.
|
|
"
|
|
REVISION "201002280000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
|
|
::= { qtechMgmt 83 }
|
|
|
|
qtechAlarmTrapsObjects OBJECT IDENTIFIER ::= { qtechFitApMibModule 10 }
|
|
qtechAlarmTraps OBJECT IDENTIFIER ::= { qtechFitApMibModule 0 }
|
|
--**************************************************
|
|
--* apQtechTrapObjects begins *
|
|
--**************************************************
|
|
qtechWIDSIllegalAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechWIDSSuspiciousType,
|
|
qtechWIDSSuspiciousDeviceMac,
|
|
qtechWIDSSuspiciousDeviceExtensionInfo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This trap will be sent at once when detecting an suspicious AP."
|
|
::= { qtechAlarmTraps 1 }
|
|
|
|
qtechTelMtWorkModeChgTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechAPCurrentPMMode,
|
|
qtechChgWorkModeAPMac
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This trap will be sent when the ap monitor workMode Change."
|
|
::= { qtechAlarmTraps 2 }
|
|
|
|
|
|
qtechAttackAlarm NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
qtechAttackType,
|
|
qtechAttackCilentIP,
|
|
qtechAttackCilentExternInfo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This trap will be sent when Attack has Appeared ."
|
|
::= { qtechAlarmTraps 4 }
|
|
----------------------------------------------------
|
|
----------------------------------------------------
|
|
qtechWIDSSuspiciousType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Suspicious ap type , eg: nonlicet AP or disturb AP."
|
|
::= { qtechAlarmTrapsObjects 1 }
|
|
|
|
qtechWIDSSuspiciousDeviceMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The macaddress of the suspicious device."
|
|
::= { qtechAlarmTrapsObjects 2 }
|
|
|
|
qtechWIDSSuspiciousDeviceExtensionInfo OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The information left for the future extension."
|
|
::= { qtechAlarmTrapsObjects 3 }
|
|
|
|
qtechAPCurrentPMMode OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The information for the current ap monitor workMode ."
|
|
::= { qtechAlarmTrapsObjects 4 }
|
|
|
|
qtechChgWorkModeAPMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The macaddress of the ap device."
|
|
::= { qtechAlarmTrapsObjects 7 }
|
|
|
|
qtechAttackType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The attack type string ."
|
|
::= { qtechAlarmTrapsObjects 8 }
|
|
|
|
qtechAttackCilentIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The ipaddress of the attack client."
|
|
::= { qtechAlarmTrapsObjects 9 }
|
|
|
|
qtechAttackCilentExternInfo OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(1..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The attack extern info string ."
|
|
::= { qtechAlarmTrapsObjects 10 }
|
|
|
|
--**************************************************
|
|
--* apQtechTrapObjects ends *
|
|
--**************************************************
|
|
qtechSystemInfoConfigObjects OBJECT IDENTIFIER ::= { qtechFitApMibModule 1 }
|
|
qtechDomain OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Product Domain."
|
|
::= { qtechSystemInfoConfigObjects 1 }
|
|
|
|
qtechPhySeparatedEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"virtual phy separated enable config ,0:off 1:on."
|
|
::= { qtechSystemInfoConfigObjects 2 }
|
|
|
|
qtechForfendDosAttackEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
on(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forfend DOS Attack config ,0:off 1:on."
|
|
::= { qtechSystemInfoConfigObjects 3 }
|
|
|
|
qtechAcTrafficLoadBalancing OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC Traffic Load Balancing enable. "
|
|
::= { qtechSystemInfoConfigObjects 4 }
|
|
|
|
qtechAcTrafficLoadBalanceThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" AC Traffic Load Balancing Threshold value . "
|
|
::= { qtechSystemInfoConfigObjects 5 }
|
|
|
|
qtechAcTrafficOtherAPThresholdValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" other AP Traffic Threshold value . "
|
|
::= { qtechSystemInfoConfigObjects 6 }
|
|
|
|
qtechAcAPWIDSScanningMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" config AP WIDS scanning mode ,
|
|
0: all channel scanning 1: auto select channel scanning . "
|
|
::= { qtechSystemInfoConfigObjects 7 }
|
|
|
|
qtechAcAPLegitimateMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" config AP Legitimate Mode value
|
|
0:legal ap 1: Illegal ap 2: Disturb AP . "
|
|
::= { qtechSystemInfoConfigObjects 8 }
|
|
|
|
qtechAcAPTreatMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" config Illegal AP Process mode 0:DOS attrack 1: disturb AP. "
|
|
::= { qtechSystemInfoConfigObjects 9 }
|
|
|
|
qtechAcAssociationFailureTotalTimes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The total times the association fails on AC."
|
|
::= { qtechSystemInfoConfigObjects 10 }
|
|
|
|
qtechAcAirIfRxTotalDataFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The air interface total Rx Data Farms on AC."
|
|
::= { qtechSystemInfoConfigObjects 11 }
|
|
|
|
qtechAcAirIfTxTotalDataFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The air interface total Tx Data Farms on AC."
|
|
::= { qtechSystemInfoConfigObjects 12 }
|
|
|
|
qtechAcAirIfTxTotalLostFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The air interface total Tx Losted Data Farms on AC."
|
|
::= { qtechSystemInfoConfigObjects 13 }
|
|
|
|
qtechAcAirIfTxAssociateFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The air interface total Tx Associate Farms on AC."
|
|
::= { qtechSystemInfoConfigObjects 14 }
|
|
|
|
qtechAcAirIfRxAssociateFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The air interface total Rx Associate Farms on AC."
|
|
::= { qtechSystemInfoConfigObjects 15 }
|
|
|
|
qtechAcAirIfBeaconTotalFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The air interface total Beacon Farms on AC."
|
|
::= { qtechSystemInfoConfigObjects 16 }
|
|
|
|
qtechAcAirIfRxTotalDataBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The air interface total Rx right Data Bytes on AC."
|
|
::= { qtechSystemInfoConfigObjects 17 }
|
|
|
|
qtechAcAirIfTxTotalDataBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The air interface total Tx right Data Bytes on AC."
|
|
::= { qtechSystemInfoConfigObjects 18 }
|
|
|
|
qtechAcAirRxFlux OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The air interface Uplink Flux on AC."
|
|
::= { qtechSystemInfoConfigObjects 19 }
|
|
|
|
qtechAcAirTxFlux OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The air interface Downlink Flux on AC."
|
|
::= { qtechSystemInfoConfigObjects 20 }
|
|
|
|
|
|
--*******************************************
|
|
-- apAPInfoConfigTable starts
|
|
--*******************************************
|
|
qtechInfoConfigObjects OBJECT IDENTIFIER ::= { qtechFitApMibModule 2 }
|
|
qtechInfoConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechApInfoConfigTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap configuration Info table."
|
|
::={ qtechInfoConfigObjects 1 }
|
|
|
|
qtechInfoConfigTableEntry OBJECT-TYPE
|
|
SYNTAX QtechApInfoConfigTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap configuration Info table."
|
|
INDEX { qtechApMacAddr }
|
|
::= { qtechInfoConfigTable 1 }
|
|
|
|
QtechApInfoConfigTableEntry ::=
|
|
SEQUENCE {
|
|
qtechAcAPWIDSWorkMode INTEGER
|
|
}
|
|
|
|
qtechAcAPWIDSWorkMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" config AP WIDS work mode, 0: WIDS disabled 1:only support monitor
|
|
2:support AP monotor and access . "
|
|
::= { qtechInfoConfigTableEntry 1 }
|
|
--*******************************************
|
|
-- apAPInfoConfigTable ends
|
|
--*******************************************
|
|
|
|
qtechStationConfigObjects OBJECT IDENTIFIER ::= { qtechFitApMibModule 4 }
|
|
--**************************************************
|
|
--* apapAC Station CONFIG starts *
|
|
--**************************************************
|
|
qtechConfigStaInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechApConfigStaInfoTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AC Config Station."
|
|
::={ qtechStationConfigObjects 1 }
|
|
|
|
qtechConfigStaInfoTableEntry OBJECT-TYPE
|
|
SYNTAX QtechApConfigStaInfoTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AC Config AP Bandwith max."
|
|
INDEX { qtechStaMacAddr }
|
|
::= { qtechConfigStaInfoTable 1 }
|
|
|
|
QtechApConfigStaInfoTableEntry ::=
|
|
SEQUENCE {
|
|
qtechACconfigAPBandwith Integer32
|
|
}
|
|
|
|
qtechACconfigAPBandwith OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AC Config AP Bandwith max."
|
|
::= { qtechConfigStaInfoTableEntry 1 }
|
|
--**************************************************
|
|
--* apapAC Station CONFIG ends *
|
|
--**************************************************
|
|
|
|
--apWlanIdSecurityCfgObjects OBJECT IDENTIFIER ::= { qtechFitApMibModule 5 }
|
|
|
|
--**************************************************
|
|
--* apapAC WlanIdSecurity CONFIG starts *
|
|
--**************************************************
|
|
--apSecurityCfgTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF ApSecurityCfgTableEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "AP security config."
|
|
-- ::={ apWlanIdSecurityCfgObjects 1 }
|
|
|
|
--apSecurityCfgTableEntry OBJECT-TYPE
|
|
-- SYNTAX ApSecurityCfgTableEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "AP security config."
|
|
-- INDEX { qtechgWlanId }
|
|
-- ::= { apSecurityCfgTable 1 }
|
|
|
|
--ApSecurityCfgTableEntry ::=
|
|
-- SEQUENCE {
|
|
-- apsecurityMode INTEGER, in china mobile node ApSSIDConfigTableEntry
|
|
-- apAuthenMode INTEGER, in china mobile node apSSIDConfigTableEntry
|
|
-- apSecurityCiphers INTEGER, in china mobile node apSSIDConfigTableEntry
|
|
-- apWEPCipherKeyIndex INTEGER, in china mobile node apSecurityConfigTableEntry
|
|
-- apWEPCipherKeyValue DisplayString, in china mobile node apSecurityConfigTableEntry
|
|
-- apWEPCipherKeyCharType INTEGER, in china mobile node apSecurityConfigTableEntry
|
|
-- apPSKCipherKeyValue DisplayString, in china mobile node apSecurityConfigTableEntry
|
|
-- apPSKCipherKeyCharType INTEGER, in china mobile node apSecurityConfigTableEntry
|
|
-- apWAPIASIPAddress IpAddress, in china mobile node apSecurityConfigTableEntry
|
|
-- apWAPIIsInstalledCer TruthValue, in china mobile node apSecurityConfigTableEntry
|
|
-- apWAPIConfigVersion Integer32, in china mobile node apWAPIExternInfoConfigTableEntry
|
|
-- apWAPIControlledAuthControl TruthValue, in china mobile node apWAPIExternInfoConfigTableEntry
|
|
-- apWAPIControlledPortControl INTEGER, in china mobile node apWAPIExternInfoConfigTableEntry
|
|
-- apWAPIOptionImplemented TruthValue, in china mobile node apWAPIExternInfoConfigTableEntry
|
|
-- apWAPIPreauthenticationImplemented TruthValue,
|
|
-- apWAPIEnabled TruthValue,
|
|
-- apWAPIPreauthEnabled TruthValue,
|
|
-- apWAPIUnicastKeysSupported Unsigned32,
|
|
-- apWAPIUnicastRekeyMethod INTEGER,
|
|
-- apWAPIUnicastRekeyTime Unsigned32,
|
|
-- apWAPIUnicastRekeyPackets Unsigned32,
|
|
-- apWAPIMulticastCipher OCTET STRING,
|
|
-- apWAPIMulticastRekeyMethod INTEGER,
|
|
-- apWAPIMulticastRekeyTime Unsigned32,
|
|
-- apWAPIMulticastRekeyPackets Unsigned32,
|
|
-- apWAPIMulticastRekeyStrict TruthValue,
|
|
-- apWAPIPSKValue OCTET STRING,
|
|
-- apWAPICertificateUpdateCount Unsigned32,
|
|
-- apWAPIUnicastUpdateCount Unsigned32,
|
|
-- apWAPIMulticastCipherSize Unsigned32,
|
|
-- apWAPIBKReauthThreshold Unsigned32,
|
|
-- apWAPISATimeout Unsigned32,
|
|
-- apWAPIAuthSuiteSelected OCTET STRING,
|
|
-- apWAPIUnicastCipherSelected OCTET STRING,
|
|
-- apWAPIMulticastCipherSelected OCTET STRING,
|
|
-- apWAPIBKIDUsed OCTET STRING,
|
|
-- apWAPIAuthSuiteRequested OCTET STRING,
|
|
-- apWAPIUnicastCipherRequested OCTET STRING,
|
|
-- apWAPIMulticastCipherRequested OCTET STRING,
|
|
-- apWAPIUnicastCipher OCTET STRING,
|
|
-- apWAPIUnicastCipherEnabled TruthValue,
|
|
-- apWAPIUnicastCipherSize Unsigned32,
|
|
-- apWAPIAuthenticationSuite OCTET STRING,
|
|
-- apWAPIAuthenticationSuiteEnabled TruthValue in china mobile node apWAPIExternInfoConfigTableEntry
|
|
-- }
|
|
|
|
--**************************************************
|
|
--* apapAC Security CONFIG ends *
|
|
--**************************************************
|
|
--**************************************************
|
|
--* apapAirIfInfoStatisticsTable starts *
|
|
--**************************************************
|
|
qtechAirIfStatisticsObjects OBJECT IDENTIFIER ::= { qtechFitApMibModule 6 }
|
|
qtechAirIfInfoStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechApAirIfInfoStatisticsTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"get air interface parameters statistics."
|
|
::={ qtechAirIfStatisticsObjects 1 }
|
|
|
|
qtechAirIfInfoStatisticsTableEntry OBJECT-TYPE
|
|
SYNTAX QtechApAirIfInfoStatisticsTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"get AP Associa Fail times "
|
|
INDEX { qtechApgWlanId,qtechApMacAddr }
|
|
::= { qtechAirIfInfoStatisticsTable 1 }
|
|
|
|
QtechApAirIfInfoStatisticsTableEntry ::=
|
|
SEQUENCE {
|
|
qtechRxTotalDataFrams Counter32,
|
|
qtechTxTotalDataFrams Counter32,
|
|
qtechTxLostDataFrams Counter32,
|
|
qtechTxAssociateFrams Counter32,
|
|
qtechRxAssociateFrams Counter32,
|
|
qtechBeaconFrams Counter32,
|
|
qtechRxTotalDataBytes Counter32,
|
|
qtechTxTotalDataBytes Counter32,
|
|
qtechRESUtilization INTEGER
|
|
}
|
|
|
|
qtechRxTotalDataFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap total Rx Data Frams."
|
|
::= { qtechAirIfInfoStatisticsTableEntry 1 }
|
|
|
|
qtechTxTotalDataFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap total Tx Data Frams."
|
|
::= { qtechAirIfInfoStatisticsTableEntry 2 }
|
|
|
|
qtechTxLostDataFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap total Tx Lost Data Frams."
|
|
::= { qtechAirIfInfoStatisticsTableEntry 3 }
|
|
|
|
qtechTxAssociateFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap total Tx Associate Frams."
|
|
::= { qtechAirIfInfoStatisticsTableEntry 4 }
|
|
|
|
qtechRxAssociateFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap total Rx Associate Frams."
|
|
::= { qtechAirIfInfoStatisticsTableEntry 5 }
|
|
|
|
qtechBeaconFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap Beacon Total Frams."
|
|
::= { qtechAirIfInfoStatisticsTableEntry 6 }
|
|
|
|
qtechRxTotalDataBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap total Rx Data Bytes."
|
|
::= { qtechAirIfInfoStatisticsTableEntry 7 }
|
|
|
|
qtechTxTotalDataBytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap total Tx Data Bytes."
|
|
::= { qtechAirIfInfoStatisticsTableEntry 8 }
|
|
|
|
qtechRESUtilization OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap Resource Utilization."
|
|
::= { qtechAirIfInfoStatisticsTableEntry 9 }
|
|
---------------------------------------------------------
|
|
---------------------------------------------------------
|
|
--**************************************************
|
|
--* apAirIfInfoStatisticsTable starts *
|
|
--**************************************************
|
|
qtechAirIfTxResendDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechApAirIfTxResendDataTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"get air interface Resend Data frames."
|
|
::={ qtechAirIfStatisticsObjects 2 }
|
|
|
|
qtechAirIfTxResendDataTableEntry OBJECT-TYPE
|
|
SYNTAX QtechApAirIfTxResendDataTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"get air interface Resend Data frames"
|
|
INDEX { qtechStaMacAddr }
|
|
::= { qtechAirIfTxResendDataTable 1 }
|
|
|
|
QtechApAirIfTxResendDataTableEntry ::=
|
|
SEQUENCE {
|
|
qtechStaResendDataFrams Counter32
|
|
}
|
|
|
|
qtechStaResendDataFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"station total Resend Data Frams."
|
|
::= { qtechAirIfTxResendDataTableEntry 1 }
|
|
|
|
|
|
--**************************************************
|
|
--* apapAirIfInfoStatisticsTable ends *
|
|
--**************************************************
|
|
|
|
--**************************************************
|
|
--* apTermServiceStatistics starts *
|
|
--**************************************************
|
|
|
|
qtechTermServiceStatistics OBJECT IDENTIFIER ::= { qtechFitApMibModule 7 }
|
|
qtechTermServiceStatisticsWithSSID OBJECT IDENTIFIER ::= { qtechTermServiceStatistics 1 }
|
|
qtechTermServiceStatisticsWithAP OBJECT IDENTIFIER ::= { qtechTermServiceStatistics 2 }
|
|
qtechTermServiceSTatisticsWithStation OBJECT IDENTIFIER ::= { qtechTermServiceStatistics 3 }
|
|
|
|
qtechTermServiceStaticWithSSIDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechApTermServiceStaticWithSSIDTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"get Term Service Statistics With SSID."
|
|
::={ qtechTermServiceStatisticsWithSSID 1 }
|
|
|
|
qtechTermServiceStaticWithSSIDTableEntry OBJECT-TYPE
|
|
SYNTAX QtechApTermServiceStaticWithSSIDTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"get Term Service Statistics With SSID"
|
|
INDEX { qtechApgWlanId }
|
|
::= { qtechTermServiceStaticWithSSIDTable 1 }
|
|
|
|
QtechApTermServiceStaticWithSSIDTableEntry ::=
|
|
SEQUENCE {
|
|
qtechTotalUserNum INTEGER,
|
|
qtechCurrentUserNum INTEGER,
|
|
qtechStaReqAccessTimes INTEGER,
|
|
qtechRspStaAccessReqTimes INTEGER,
|
|
qtechStaAccessSucessTimes INTEGER,
|
|
qtechIneffiLinkVerifyFailTime INTEGER,
|
|
qtechTimeoutLinkVerifyFailTime INTEGER,
|
|
qtechInefficiencyLinkVerifyFailTime INTEGER,
|
|
qtechOtherReasonLinkVerifyFailTime INTEGER,
|
|
qtechIneffiAssociationFailTime INTEGER,
|
|
qtechTimeoutAssociationFailTime INTEGER,
|
|
qtechInefficiencyAssociationFailTime INTEGER,
|
|
qtechOtherReasonAssociationFailTime INTEGER,
|
|
qtechTotalReassociationAtmptTimes INTEGER,
|
|
qtechTotalReassociationSuccessTimes INTEGER,
|
|
qtechIneffiReassociationFailTime INTEGER,
|
|
qtechTimeoutReassociationFailTime INTEGER,
|
|
qtechInefficiencyReassociationFailTime INTEGER,
|
|
qtechOtherReasonReassociationFailTime INTEGER,
|
|
qtechTotalIdentificationAtmptTimes INTEGER,
|
|
qtechTotalIdentificationSuccessTimes INTEGER,
|
|
qtechPwdErrorIdentifyFailTime INTEGER,
|
|
qtechIneffiIdentificationFailTime INTEGER,
|
|
qtechTimeoutIdentificationFailTime INTEGER,
|
|
qtechInefficiencyIdentificationFailTime INTEGER,
|
|
qtechOtherReasonIdentificationFailTime INTEGER,
|
|
qtechTotalRemoveLinkVerifyFailTimes INTEGER,
|
|
qtechLeaveAPCoverageRemoveLinkVerifyFailTimes INTEGER,
|
|
qtechInefficiencyRemoveLinkVerifyFailTime INTEGER,
|
|
qtechLinkVerifyFailRemoveLinkVerifyFailTime INTEGER,
|
|
qtechOtherReasonRemoveLinkVerifyFailTime INTEGER,
|
|
qtechTotalRemoveLinkAssociationTimes INTEGER,
|
|
qtechLeaveAPCoverageRemoveAssociationFailTimes INTEGER,
|
|
qtechInefficiencyRemoveAssociationFailTime INTEGER,
|
|
qtechAssociationFailRemoveAssociationFailTime INTEGER,
|
|
qtechOtherReasonRemoveAssociationFailTime INTEGER
|
|
}
|
|
|
|
qtechTotalUserNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total user number that have connected to the AP."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 1}
|
|
|
|
qtechCurrentUserNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total current user number that have connected to the AP."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 2}
|
|
|
|
qtechStaReqAccessTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"station request to access to AP times."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 3}
|
|
|
|
qtechRspStaAccessReqTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap response station access request times."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 4}
|
|
|
|
qtechStaAccessSucessTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"sta success to connet to ap times."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 5}
|
|
|
|
qtechIneffiLinkVerifyFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total link verify failure times due to algorithm or transform SN discrepancy."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 6}
|
|
|
|
qtechTimeoutLinkVerifyFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total link verify failure times due to timeout."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 7}
|
|
|
|
qtechInefficiencyLinkVerifyFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total link verify failure times due to inefficiency."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 8}
|
|
|
|
qtechOtherReasonLinkVerifyFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total link verify failure times due to other reason."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 9}
|
|
|
|
qtechIneffiAssociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Association failure times due to algorithm or transform SN discrepancy."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 10}
|
|
|
|
qtechTimeoutAssociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Association failure times due to timeout."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 11}
|
|
|
|
qtechInefficiencyAssociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Association failure times due to inefficiency."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 12}
|
|
|
|
qtechOtherReasonAssociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Association failure times due to other reason."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 13}
|
|
|
|
qtechTotalReassociationAtmptTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total re-association attempt times."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 14}
|
|
|
|
qtechTotalReassociationSuccessTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total re-association success times."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 15}
|
|
|
|
qtechIneffiReassociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Reassociation failure times due to algorithm or transform SN discrepancy."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 16}
|
|
|
|
qtechTimeoutReassociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Reassociation failure times due to timeout."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 17}
|
|
|
|
qtechInefficiencyReassociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Reassociation failure times due to inefficiency."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 18}
|
|
|
|
qtechOtherReasonReassociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Reassociation failure times due to other reason."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 19}
|
|
|
|
qtechTotalIdentificationAtmptTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Identification attempt times."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 20}
|
|
|
|
qtechTotalIdentificationSuccessTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Identification success times."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 21}
|
|
|
|
qtechPwdErrorIdentifyFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total identification failure times due to password error."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 22}
|
|
|
|
qtechIneffiIdentificationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Identification failure times due to algorithm or transform SN discrepancy."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 23}
|
|
|
|
qtechTimeoutIdentificationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Identification failure times due to timeout."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 24}
|
|
|
|
qtechInefficiencyIdentificationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Identification failure times due to inefficiency."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 25}
|
|
|
|
qtechOtherReasonIdentificationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Identification failure times due to other reason."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 26}
|
|
|
|
qtechTotalRemoveLinkVerifyFailTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total failure times of removing link verification."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 27}
|
|
|
|
qtechLeaveAPCoverageRemoveLinkVerifyFailTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total failure times due to leaving AP coverage area."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 28}
|
|
|
|
qtechInefficiencyRemoveLinkVerifyFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total remove link failure times due to inefficiency."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 29}
|
|
|
|
qtechLinkVerifyFailRemoveLinkVerifyFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total remove link failure times due to link verify failure."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 30}
|
|
|
|
qtechOtherReasonRemoveLinkVerifyFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total remove link failure times due to other reason."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 31}
|
|
|
|
qtechTotalRemoveLinkAssociationTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total failure times of removing association."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 32}
|
|
|
|
qtechLeaveAPCoverageRemoveAssociationFailTimes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total remove association failure times due to leaving AP coverage area."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 33}
|
|
|
|
qtechInefficiencyRemoveAssociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total remove association failure times due to inefficiency."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 34}
|
|
|
|
qtechAssociationFailRemoveAssociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total remove association failure times due to link verify failure."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 35}
|
|
|
|
qtechOtherReasonRemoveAssociationFailTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total remove association failure times due to other reason."
|
|
::= { qtechTermServiceStaticWithSSIDTableEntry 36}
|
|
--*************************************************
|
|
--*************************************************
|
|
qtechTermServiceStationWithStationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechTermServiceStationWithStationTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Statistic of user MAC address by SSID."
|
|
::= { qtechTermServiceSTatisticsWithStation 1 }
|
|
|
|
qtechTermServiceStationWithStationTableEntry OBJECT-TYPE
|
|
SYNTAX QtechTermServiceStationWithStationTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of apTermServiceStationWithStationTable."
|
|
INDEX
|
|
{ qtechApgWlanId,qtechStaMacAddr}
|
|
::= { qtechTermServiceStationWithStationTable 1 }
|
|
|
|
QtechTermServiceStationWithStationTableEntry ::=
|
|
SEQUENCE {
|
|
qtechStaAssociateTime Counter32,
|
|
qtechRxStaDataFrams Counter32,
|
|
qtechRXStaErrorFrams Counter32,
|
|
qtechTxStaDataFrams Counter32,
|
|
qtechReSendDataFrams Counter32,
|
|
qtechStaRxAvgSpeed INTEGER,
|
|
qtechStaTxAvgSpeed INTEGER,
|
|
qtechStaThroughput INTEGER,
|
|
qtechStaSignalStrength INTEGER,
|
|
qtechStaSignalNoise INTEGER
|
|
}
|
|
|
|
|
|
qtechStaAssociateTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"station Associate to ap time ,unit is minute."
|
|
::= { qtechTermServiceStationWithStationTableEntry 2}
|
|
|
|
qtechRxStaDataFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap Rx station Data Frames ."
|
|
::= { qtechTermServiceStationWithStationTableEntry 3}
|
|
|
|
qtechRXStaErrorFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap Rx station Error Frames ."
|
|
::= { qtechTermServiceStationWithStationTableEntry 4}
|
|
|
|
qtechTxStaDataFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap Tx station Data Frames ."
|
|
::= { qtechTermServiceStationWithStationTableEntry 5}
|
|
|
|
qtechReSendDataFrams OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap Resend station Data Frames ."
|
|
::= { qtechTermServiceStationWithStationTableEntry 6}
|
|
|
|
qtechStaRxAvgSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap Send to station average DATA speed ."
|
|
::= { qtechTermServiceStationWithStationTableEntry 7}
|
|
|
|
qtechStaTxAvgSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap Send from station average DATA speed ."
|
|
::= { qtechTermServiceStationWithStationTableEntry 8}
|
|
|
|
qtechStaThroughput OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"station Throughput ."
|
|
::= { qtechTermServiceStationWithStationTableEntry 9}
|
|
|
|
qtechStaSignalStrength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap receive station signal strength ."
|
|
::= { qtechTermServiceStationWithStationTableEntry 10}
|
|
|
|
qtechStaSignalNoise OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ap receive station signal noise ."
|
|
::= { qtechTermServiceStationWithStationTableEntry 11}
|
|
--*************************************************
|
|
|
|
---------------------------------------------------
|
|
---------------------------------------------------
|
|
qtechTermServiceStaticWithAPTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechTermServiceStaticWithAPTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"get Term Service Statistics With AP."
|
|
::={ qtechTermServiceStatisticsWithAP 1 }
|
|
|
|
qtechTermServiceStaticWithAPTableEntry OBJECT-TYPE
|
|
SYNTAX QtechTermServiceStaticWithAPTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"get Term Service Statistics With AP"
|
|
INDEX { qtechApMacAddr }
|
|
::= { qtechTermServiceStaticWithAPTable 1 }
|
|
|
|
QtechTermServiceStaticWithAPTableEntry ::=
|
|
SEQUENCE {
|
|
qtechUserAccumulateTime Counter32,
|
|
qtechAssociaFailTimes Counter32
|
|
|
|
}
|
|
qtechUserAccumulateTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total accumulation time of all users that have connected to the AP."
|
|
::= { qtechTermServiceStaticWithAPTableEntry 1}
|
|
|
|
qtechAssociaFailTimes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total Associate Fail times for the AP."
|
|
::= { qtechTermServiceStaticWithAPTableEntry 2}
|
|
--**************************************************
|
|
--* apTermServiceStatistics ends *
|
|
--**************************************************
|
|
|
|
qtechDOT11WIDSParamObjects OBJECT IDENTIFIER ::= { qtechFitApMibModule 8 }
|
|
--**************************************************
|
|
--* apDot11WIDSInfoTable begins
|
|
--**************************************************
|
|
qtechDot11WIDSInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechDot11WIDSInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table used to acac the configuration information of ac/ac."
|
|
::={ qtechDOT11WIDSParamObjects 1 }
|
|
|
|
qtechDot11WIDSInfoEntry OBJECT-TYPE
|
|
SYNTAX QtechDot11WIDSInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of the table used to acac the configuration information of ac/ac."
|
|
INDEX { qtechDot11WIDSLocalIndex }
|
|
::={ qtechDot11WIDSInfoTable 1 }
|
|
|
|
QtechDot11WIDSInfoEntry ::=
|
|
SEQUENCE {
|
|
qtechDot11WIDSLocalIndex INTEGER,
|
|
qtechDot11WIDSpermittedSSID DisplayString,
|
|
qtechDot11WIDSpermitBSSID MacAddress,
|
|
qtechDot11WIDSDeviceOUI DisplayString,
|
|
qtechDot11WIDSSuspiciousAPBSS MacAddress,
|
|
qtechDot11WIDSSuspiciousAPCount INTEGER,
|
|
qtechDot11WIDSMomentFirstTimeDetectedSusAP TimeTicks,
|
|
qtechDot11WIDSMomentLastTimeDetectedSusAP TimeTicks,
|
|
qtechDot11WIDSSuspiciousAPSSID DisplayString,
|
|
qtechDot11WIDSSuspiciousAPMaxSignalStrength INTEGER,
|
|
qtechDot11WIDSSuspiciousAPUsingChannel INTEGER,
|
|
qtechDot11WIDSSuspiciousAPFrameEncrption INTEGER,
|
|
qtechDot11WIDSSuspiciousAPNeedsDealingTag TruthValue,
|
|
qtechDot11WIDSSuspiciousAPIgnoredTag TruthValue,
|
|
qtechDot11WIDSSuspiciousSTAMAC MacAddress,
|
|
qtechDot11WIDSAPCountDetectingSuspiciousSTA INTEGER,
|
|
qtechDot11WIDSMomentFirstTimeDetectedSusSTA TimeTicks,
|
|
qtechDot11WIDSMomentLastTimeDetectedSusSTA TimeTicks,
|
|
qtechDot11WIDSBSSIDSuspiciousSTAAccessing MacAddress,
|
|
qtechDot11WIDSSuspiciousSTAMaxSignalStrength INTEGER,
|
|
qtechDot11WIDSSuspiciousSTAUsingChannel INTEGER,
|
|
qtechDot11WIDSSuspiciousSTAWorksInAdhocMode TruthValue,
|
|
qtechDot11WIDSSuspiciousSTANeedsDealingTag TruthValue,
|
|
qtechDot11WIDSSuspiciousSTAIgnoredTag TruthValue,
|
|
qtechDot11WIDSFloodAttackDetectSwitch TruthValue,
|
|
qtechDot11WIDSSpoofAttackDetectSwitch TruthValue,
|
|
qtechDot11WIDSWeakIVDetectSwitch TruthValue,
|
|
qtechDot11WIDSClearIllegalEquipmentHistroyTag TruthValue,
|
|
qtechDot11WIDSClearAttackDetectionHistroyTag TruthValue,
|
|
qtechDot11WIDSClearAttackDetectionStaticsTag TruthValue
|
|
}
|
|
|
|
qtechDot11WIDSLocalIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The dot11 wids local index num ."
|
|
::= { qtechDot11WIDSInfoEntry 1 }
|
|
|
|
qtechDot11WIDSpermittedSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The ssid permitted to access the service."
|
|
::= { qtechDot11WIDSInfoEntry 2 }
|
|
|
|
qtechDot11WIDSpermitBSSID OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The bssid permitted to access the service."
|
|
::= { qtechDot11WIDSInfoEntry 3 }
|
|
|
|
qtechDot11WIDSDeviceOUI OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The OUI whose device is permitted to provide the service."
|
|
::= { qtechDot11WIDSInfoEntry 4 }
|
|
|
|
qtechDot11WIDSSuspiciousAPBSS OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The BSS MAC of the Suspicious AP."
|
|
::= { qtechDot11WIDSInfoEntry 5 }
|
|
|
|
qtechDot11WIDSSuspiciousAPCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The count of the Suspicious AP."
|
|
::= { qtechDot11WIDSInfoEntry 6 }
|
|
|
|
qtechDot11WIDSMomentFirstTimeDetectedSusAP OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The moment when the AP is detected as the Suspicious AP at the first time."
|
|
::= { qtechDot11WIDSInfoEntry 7 }
|
|
|
|
qtechDot11WIDSMomentLastTimeDetectedSusAP OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The moment when the AP is detected as the Suspicious AP at the last time."
|
|
::= { qtechDot11WIDSInfoEntry 8 }
|
|
|
|
qtechDot11WIDSSuspiciousAPSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The SSID of the Suspicious AP."
|
|
::= { qtechDot11WIDSInfoEntry 9 }
|
|
|
|
qtechDot11WIDSSuspiciousAPMaxSignalStrength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The max signal strength of the Suspicious AP."
|
|
::= { qtechDot11WIDSInfoEntry 10 }
|
|
|
|
qtechDot11WIDSSuspiciousAPUsingChannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The channel the Suspicious AP is in."
|
|
::= { qtechDot11WIDSInfoEntry 11 }
|
|
|
|
qtechDot11WIDSSuspiciousAPFrameEncrption OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The frame encrption of the Suspicious AP."
|
|
::= { qtechDot11WIDSInfoEntry 12 }
|
|
|
|
qtechDot11WIDSSuspiciousAPNeedsDealingTag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The tag telling whether it needs to deal the Suspicious AP."
|
|
::= { qtechDot11WIDSInfoEntry 13 }
|
|
|
|
qtechDot11WIDSSuspiciousAPIgnoredTag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The tag telling whether to ignore the Suspicious AP."
|
|
::= { qtechDot11WIDSInfoEntry 14 }
|
|
|
|
qtechDot11WIDSSuspiciousSTAMAC OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The MAC of the the Suspicious STA."
|
|
::= { qtechDot11WIDSInfoEntry 15 }
|
|
|
|
qtechDot11WIDSAPCountDetectingSuspiciousSTA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The AP count which is detecting the Suspicious STA."
|
|
::= { qtechDot11WIDSInfoEntry 16 }
|
|
|
|
qtechDot11WIDSMomentFirstTimeDetectedSusSTA OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The moment when the STA is detected as the Suspicious STA at the first time."
|
|
::= { qtechDot11WIDSInfoEntry 17 }
|
|
|
|
qtechDot11WIDSMomentLastTimeDetectedSusSTA OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The moment when the AP is detected as the Suspicious AP at the last time."
|
|
::= { qtechDot11WIDSInfoEntry 18 }
|
|
|
|
qtechDot11WIDSBSSIDSuspiciousSTAAccessing OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The BSSID which the the Suspicious STA is trying to access."
|
|
::= { qtechDot11WIDSInfoEntry 19 }
|
|
|
|
qtechDot11WIDSSuspiciousSTAMaxSignalStrength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The max signal strength of the Suspicious STA."
|
|
::= { qtechDot11WIDSInfoEntry 20 }
|
|
|
|
qtechDot11WIDSSuspiciousSTAUsingChannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The channel the Suspicious sta is in."
|
|
::= { qtechDot11WIDSInfoEntry 21 }
|
|
|
|
qtechDot11WIDSSuspiciousSTAWorksInAdhocMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The tag whether the Suspicious STA is working in the Ad hoc mode."
|
|
::= { qtechDot11WIDSInfoEntry 22 }
|
|
|
|
|
|
qtechDot11WIDSSuspiciousSTANeedsDealingTag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The tag telling whether it needs to deal the Suspicious STA."
|
|
::= { qtechDot11WIDSInfoEntry 23 }
|
|
|
|
qtechDot11WIDSSuspiciousSTAIgnoredTag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The tag telling whether to ignore the Suspicious STA."
|
|
::= { qtechDot11WIDSInfoEntry 24 }
|
|
|
|
qtechDot11WIDSFloodAttackDetectSwitch OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This tag tells whether to enable flooding attack detecting."
|
|
::= { qtechDot11WIDSInfoEntry 25 }
|
|
|
|
qtechDot11WIDSSpoofAttackDetectSwitch OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This tag tells whether to enable spoof attack detecting."
|
|
::= { qtechDot11WIDSInfoEntry 26 }
|
|
|
|
qtechDot11WIDSWeakIVDetectSwitch OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This tag tells whether to enable weak IV detecting."
|
|
::= { qtechDot11WIDSInfoEntry 27 }
|
|
|
|
qtechDot11WIDSClearIllegalEquipmentHistroyTag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This tag tells whether to clear the illegal equipment history."
|
|
::= { qtechDot11WIDSInfoEntry 28 }
|
|
|
|
qtechDot11WIDSClearAttackDetectionHistroyTag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This tag tells whether to clear the attack detection history."
|
|
::= { qtechDot11WIDSInfoEntry 29 }
|
|
|
|
qtechDot11WIDSClearAttackDetectionStaticsTag OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This tag tells whether to clear the attack detection statics."
|
|
::= { qtechDot11WIDSInfoEntry 30 }
|
|
|
|
--**************************************************
|
|
--* apDot11WIDSInfoTable ends
|
|
--**************************************************
|
|
--**************************************************
|
|
--* apDot11LawlessApInfoTable starts
|
|
--**************************************************
|
|
qtechDot11LawlessApInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechDot11LawlessApInfoTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table used to display Lawless AP info t"
|
|
::={ qtechDOT11WIDSParamObjects 2 }
|
|
|
|
qtechDot11LawlessApInfoTableEntry OBJECT-TYPE
|
|
SYNTAX QtechDot11LawlessApInfoTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table used to display Lawless AP info "
|
|
INDEX { qtechLawlessAPIndex }
|
|
::={ qtechDot11LawlessApInfoTable 1 }
|
|
|
|
QtechDot11LawlessApInfoTableEntry ::=
|
|
SEQUENCE {
|
|
qtechLawlessAPIndex INTEGER,
|
|
qtechLawlessAPSignalStrength Integer32,
|
|
qtechLawlessAPSignalSNR Integer32,
|
|
qtechLawlessAPChannelNum INTEGER,
|
|
qtechLawlessAPSSIDName DisplayString,
|
|
qtechLawlessAPMacaddr MacAddress,
|
|
qtechLawlessAPTreatMode INTEGER
|
|
|
|
}
|
|
|
|
qtechLawlessAPIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Lawless AP local Index number ."
|
|
::= { qtechDot11LawlessApInfoTableEntry 1 }
|
|
|
|
qtechLawlessAPSignalStrength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Lawless AP signal Strength ."
|
|
::= { qtechDot11LawlessApInfoTableEntry 2 }
|
|
|
|
qtechLawlessAPSignalSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Lawless AP signal SNR ."
|
|
::= { qtechDot11LawlessApInfoTableEntry 3 }
|
|
|
|
qtechLawlessAPChannelNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Lawless AP Channel Number ."
|
|
::= { qtechDot11LawlessApInfoTableEntry 4 }
|
|
|
|
qtechLawlessAPSSIDName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Lawless AP SSID Name display ."
|
|
::= { qtechDot11LawlessApInfoTableEntry 5 }
|
|
|
|
qtechLawlessAPMacaddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Lawless AP BSSID <MAC_ADDRESS> ."
|
|
::= { qtechDot11LawlessApInfoTableEntry 6 }
|
|
|
|
qtechLawlessAPTreatMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Lawless AP Treat mode detail 1: DosAttack state
|
|
2: disturb User connect to lawless AP ."
|
|
::= { qtechDot11LawlessApInfoTableEntry 7 }
|
|
|
|
--**************************************************
|
|
--* apLawlessApInfoTable ends
|
|
--**************************************************
|
|
|
|
--**************************************************
|
|
--* apDot11UndefinedApInfoTable starts
|
|
--**************************************************
|
|
qtechDot11UndefinedApInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechDot11UndefinedApInfoTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table used to display Undefined AP info t"
|
|
::={ qtechDOT11WIDSParamObjects 3 }
|
|
|
|
qtechDot11UndefinedApInfoTableEntry OBJECT-TYPE
|
|
SYNTAX QtechDot11UndefinedApInfoTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table used to display Undefined AP info "
|
|
INDEX { qtechUndefinedAPIndex }
|
|
::={ qtechDot11UndefinedApInfoTable 1 }
|
|
|
|
QtechDot11UndefinedApInfoTableEntry ::=
|
|
SEQUENCE {
|
|
qtechUndefinedAPIndex INTEGER,
|
|
qtechUndefinedAPSignalStrength Integer32,
|
|
qtechUndefinedAPSignalSNR Integer32,
|
|
qtechUndefinedAPChannelNum INTEGER,
|
|
qtechUndefinedAPSSIDName DisplayString,
|
|
qtechUndefinedAPMacaddr MacAddress,
|
|
qtechUndefinedAPTreatMode INTEGER
|
|
|
|
}
|
|
|
|
qtechUndefinedAPIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Undefined AP local Index number ."
|
|
::= { qtechDot11UndefinedApInfoTableEntry 1 }
|
|
|
|
qtechUndefinedAPSignalStrength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Undefined AP signal Strength ."
|
|
::= { qtechDot11UndefinedApInfoTableEntry 2 }
|
|
|
|
qtechUndefinedAPSignalSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Undefined AP signal SNR ."
|
|
::= { qtechDot11UndefinedApInfoTableEntry 3 }
|
|
|
|
qtechUndefinedAPChannelNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Undefined AP Channel Number ."
|
|
::= { qtechDot11UndefinedApInfoTableEntry 4 }
|
|
|
|
qtechUndefinedAPSSIDName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Undefined AP SSID Name display ."
|
|
::= { qtechDot11UndefinedApInfoTableEntry 5 }
|
|
|
|
qtechUndefinedAPMacaddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Undefined AP BSSID <MAC_ADDRESS> ."
|
|
::= { qtechDot11UndefinedApInfoTableEntry 6 }
|
|
|
|
qtechUndefinedAPTreatMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Undefined AP Treat mode detail 1: DosAttack state
|
|
2: disturb User connect to lawless AP ."
|
|
::= { qtechDot11UndefinedApInfoTableEntry 7 }
|
|
|
|
--**************************************************
|
|
--* qtechUndefinedApInfoTable ends
|
|
--**************************************************
|
|
|
|
--**************************************************
|
|
--* apDot11LegalityApInfoTable starts
|
|
--**************************************************
|
|
qtechDot11LegalityApInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF QtechDot11LegalityApInfoTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table used to display Legality AP info t"
|
|
::={ qtechDOT11WIDSParamObjects 4 }
|
|
|
|
qtechDot11LegalityApInfoTableEntry OBJECT-TYPE
|
|
SYNTAX QtechDot11LegalityApInfoTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table used to display Legality AP info "
|
|
INDEX { qtechLegalityAPIndex }
|
|
::={ qtechDot11LegalityApInfoTable 1 }
|
|
|
|
QtechDot11LegalityApInfoTableEntry ::=
|
|
SEQUENCE {
|
|
qtechLegalityAPIndex INTEGER,
|
|
qtechLegalityAPSignalStrength Integer32,
|
|
qtechLegalityAPSignalSNR Integer32,
|
|
qtechLegalityAPChannelNum INTEGER,
|
|
qtechLegalityAPSSIDName DisplayString,
|
|
qtechLegalityAPMacaddr MacAddress,
|
|
qtechLegalityAPTreatMode INTEGER
|
|
|
|
}
|
|
|
|
qtechLegalityAPIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Legality AP local Index number ."
|
|
::= { qtechDot11LegalityApInfoTableEntry 1 }
|
|
|
|
qtechLegalityAPSignalStrength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Legality AP signal Strength ."
|
|
::= { qtechDot11LegalityApInfoTableEntry 2 }
|
|
|
|
qtechLegalityAPSignalSNR OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Legality AP signal SNR ."
|
|
::= { qtechDot11LegalityApInfoTableEntry 3 }
|
|
|
|
qtechLegalityAPChannelNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Legality AP Channel Number ."
|
|
::= { qtechDot11LegalityApInfoTableEntry 4 }
|
|
|
|
qtechLegalityAPSSIDName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Legality AP SSID Name display ."
|
|
::= { qtechDot11LegalityApInfoTableEntry 5 }
|
|
|
|
qtechLegalityAPMacaddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Legality AP BSSID <MAC_ADDRESS> ."
|
|
::= { qtechDot11LegalityApInfoTableEntry 6 }
|
|
|
|
qtechLegalityAPTreatMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is Legality AP Treat mode detail 1: DosAttack state
|
|
2: disturb User connect to lawless AP ."
|
|
::= { qtechDot11LegalityApInfoTableEntry 7 }
|
|
|
|
--**************************************************
|
|
--* qtechLegalityApInfoTable ends
|
|
--**************************************************
|
|
|
|
--**********************************************
|
|
--* apSSIDListCreateTable starts
|
|
--**********************************************
|
|
--apSSIDConfigObjects OBJECT IDENTIFIER ::= { qtechFitApMibModule 9 } please see china mobile node ApSSIDListCreateTableEntry
|
|
--apSSIDListCreateTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF ApSSIDListCreateTableEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The SSID list manegment for ap."
|
|
-- ::={ apSSIDConfigObjects 1 }
|
|
|
|
--apSSIDListCreateTableEntry OBJECT-TYPE
|
|
-- SYNTAX ApSSIDListCreateTableEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The SSID list manegment for ap"
|
|
-- INDEX {qtechgWlanId}
|
|
-- ::= { apSSIDListCreateTable 1 }
|
|
|
|
--ApSSIDListCreateTableEntry ::=
|
|
-- SEQUENCE {
|
|
-- apListBSSIDAddr MacAddress,
|
|
-- apSSIDRadioNum INTEGER,
|
|
-- apSSIDApMACaddr MacAddress
|
|
-- }
|
|
--**********************************************
|
|
--*apSSIDListCreateTable ends
|
|
--**********************************************
|
|
END
|
|
|