Observium_CE/mibs/qtech/QTECH-ROUTER-WIFI-MIB

1234 lines
46 KiB
Plaintext

-- ****************************************************************
-- Qtech WIFI Configuration and Statistics MIB
--
-- DEC 2014, Xiongyang
--
-- Copyright (c) 2014 by Qtech Networks Co.,Ltd.
-- All rights reserved.
--
-- ****************************************************************
-- Start module
QTECH-ROUTER-WIFI-MIB DEFINITIONS ::= BEGIN
-- Start external defined node
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
Gauge32,
Unsigned32,
Counter64,
IpAddress
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
DisplayString,
MacAddress,
RowStatus,
TruthValue
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
qtechMgmt
FROM QTECH-SMI;
-- End external defined node
-- Start root node
qtechWifiMIB MODULE-IDENTITY
LAST-UPDATED "201412290000Z"
ORGANIZATION "Qtech Networks Co.,Ltd."
CONTACT-INFO
"E-mail: service@qtech.com.cn"
DESCRIPTION
"This module defines qtech wifi mibs."
REVISION "201412290000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { qtechMgmt 133}
QtechEableType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"enable or disable."
SYNTAX INTEGER {
enable(1),
disable(2)
}
QtechWlanType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"wlan type."
SYNTAX INTEGER {
ap(1),
station(2)
}
QtechIsolateType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"wlan ap Isolate type."
SYNTAX INTEGER {
isolate(1),
noisolate(2)
}
QtechAuthenticationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"authentication type."
SYNTAX INTEGER {
open(1),
share-key(2)
}
QtechWapPskCiphersType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"authentication type."
SYNTAX INTEGER {
aes(1),
tkip(2),
auto(3)
}
QtechWifiChanWidthType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Chanle Width type."
SYNTAX INTEGER {
twenty(1),
forty(2)
}
QtechWifiSlotType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Slot type."
SYNTAX INTEGER {
short(1),
long(2)
}
QtechWifiFreChanelType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Chanle Width type."
SYNTAX INTEGER {
two-point-four(1),
five(2)
}
-- End root node
qtechWifiMIBObjects OBJECT IDENTIFIER ::= { qtechWifiMIB 1 }
-- WIFI MIB
-- Node definitions
qtechWifiDot11radioSupportObjects OBJECT IDENTIFIER ::= { qtechWifiMIBObjects 1 }
qtechWifiWlanObjects OBJECT IDENTIFIER ::= { qtechWifiMIBObjects 2 }
qtechWifiDot11radioIfConfigObjects OBJECT IDENTIFIER ::= { qtechWifiMIBObjects 3 }
-- qtechWifiDot11radioIfApplyObjects OBJECT IDENTIFIER ::= { qtechWifiMIBObjects 4 }
qtechWifiWlanAssociateObjects OBJECT IDENTIFIER ::= { qtechWifiMIBObjects 4 }
-- Start wifiwlan objects
qtechWifiDot11radioSupportTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechWifiDot11radioSupportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the router support the wifi ability ,
include radio index,ap number,station number"
::= { qtechWifiDot11radioSupportObjects 1 }
qtechWifiDot11radioSupportEntry OBJECT-TYPE
SYNTAX QtechWifiDot11radioSupportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the router support the wifi ability entry."
INDEX { qtechWifiDot11radioIndex }
::= { qtechWifiDot11radioSupportTable 1 }
QtechWifiDot11radioSupportEntry::=
SEQUENCE {
qtechWifiDot11radioIndex
Integer32,
qtechWifiDot11radioApMaxCnt
Integer32,
qtechWifiDot11radioStationMaxCnt
Integer32
}
qtechWifiDot11radioIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the wifi radio interface index."
::= { qtechWifiDot11radioSupportEntry 1 }
qtechWifiDot11radioApMaxCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the wifi radio interface support max ap count."
::= { qtechWifiDot11radioSupportEntry 2 }
qtechWifiDot11radioStationMaxCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the wifi radio interface support max station count."
::= { qtechWifiDot11radioSupportEntry 3 }
qtechWifiWlanIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechWifiWlanIndexNext when creating entries in the
qtechWifiWlanTable. The value 0 indicates that no
unassigned entries are available."
::= { qtechWifiWlanObjects 1 }
qtechWifiVlanIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechWifiVlanIndexNext when creating entries in the
qtechWifiWlanTable. The value 0 indicates that no
unassigned entries are available."
::= { qtechWifiWlanObjects 2 }
qtechWifiWlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechWifiWlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of wifi wlan templet."
::= { qtechWifiWlanObjects 3 }
qtechWifiWlanEntry OBJECT-TYPE
SYNTAX QtechWifiWlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Wifi wlan temple entry."
INDEX { qtechWifiWlanIndex }
::= { qtechWifiWlanTable 1 }
QtechWifiWlanEntry ::=
SEQUENCE {
qtechWifiWlanIndex
Integer32,
qtechWifiWlanType
QtechWlanType,
qtechWifiWlanSsidName
DisplayString,
qtechWifiWlanVlanId
Integer32,
qtechWifiWlanRowStatus
RowStatus,
qtechWifiWlanBroadcastSsid
QtechEableType,
qtechWifiWlanIsolate
QtechIsolateType,
qtechWifiWlanBssStaLimit
Integer32,
rujieWifiWlanSecurityType
BITS,
qtechWifiWlanAuthenticationSetKey
DisplayString,
qtechWifiWlanWepAuthenticationType
QtechAuthenticationType,
qtechWifiWlanWpaPskCiphersType
QtechWapPskCiphersType,
qtechWifiWlanPassphrase
DisplayString,
qtechWifiWlanDot11RadioIfindex
Integer32,
qtechWifiWlanDot11RadioSubIfindex
Integer32
}
qtechWifiWlanIndex OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The wlan index"
::= { qtechWifiWlanEntry 1 }
qtechWifiWlanType OBJECT-TYPE
SYNTAX QtechWlanType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wlan type ap or station."
::= { qtechWifiWlanEntry 2 }
qtechWifiWlanSsidName OBJECT-TYPE
SYNTAX DisplayString(SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wlan ssid name"
::= { qtechWifiWlanEntry 3 }
qtechWifiWlanVlanId OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wlan vlan id"
::= { qtechWifiWlanEntry 4 }
qtechWifiWlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"create/modify/delete wlan"
::= { qtechWifiWlanEntry 5 }
qtechWifiWlanBroadcastSsid OBJECT-TYPE
SYNTAX QtechEableType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"BroadcastSsid enable or disable"
::= { qtechWifiWlanEntry 6}
qtechWifiWlanIsolate OBJECT-TYPE
SYNTAX QtechIsolateType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Isolate ap"
::= { qtechWifiWlanEntry 7 }
qtechWifiWlanBssStaLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the number of user count of bss"
::= { qtechWifiWlanEntry 8 }
rujieWifiWlanSecurityType OBJECT-TYPE
SYNTAX BITS {
null(0),
wep(1),
wpa-psk(2),
wpa2-psk(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"wlan security type"
::= { qtechWifiWlanEntry 9 }
qtechWifiWlanAuthenticationSetKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"wlan security authentication type"
::= { qtechWifiWlanEntry 10 }
qtechWifiWlanWepAuthenticationType OBJECT-TYPE
SYNTAX QtechAuthenticationType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the wep authentication type"
::= { qtechWifiWlanEntry 11 }
qtechWifiWlanWpaPskCiphersType OBJECT-TYPE
SYNTAX QtechWapPskCiphersType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wpa-psk ciphers type."
::= { qtechWifiWlanEntry 12 }
qtechWifiWlanPassphrase OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The station connect ap setkey ."
::= { qtechWifiWlanEntry 13 }
qtechWifiWlanDot11RadioIfindex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the ifindex of interface dot11radio"
::= { qtechWifiWlanEntry 14 }
qtechWifiWlanDot11RadioSubIfindex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the ifindex of subinterface dot11radio"
::= { qtechWifiWlanEntry 15 }
-- End wifi wlan objects
-- Start Dot11radio interface config objects
qtechWifiDot11radioIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechWifiDot11radioIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of wifi Dot11radio interface config."
::= { qtechWifiDot11radioIfConfigObjects 1 }
qtechWifiDot11radioIfConfigEntry OBJECT-TYPE
SYNTAX QtechWifiDot11radioIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"wifi Dot11radio interface config entry."
INDEX { qtechWifiDot11radioIfConfigIfIndex }
::= { qtechWifiDot11radioIfConfigTable 1 }
QtechWifiDot11radioIfConfigEntry ::=
SEQUENCE {
qtechWifiDot11radioIfConfigIfIndex
Integer32,
qtechWifiDot11radioIfConfigRowStatus
RowStatus,
qtechWifiDot11radioIfConfigFreBand
QtechWifiFreChanelType,
qtechWifiDot11radioIfConfigChannel
Integer32,
qtechWifiDot11radioIfConfigChanWidth
QtechWifiChanWidthType,
qtechWifiDot11radioIfConfigCountryCode
DisplayString,
qtechWifiDot11radioIfConfigPowerLocal
Integer32,
qtechWifiDot11radioIfConfigWirelessProSupport
BITS,
qtechWifiDot11radioIfConfigStaLimit
Integer32,
qtechWifiDot11radioIfConfig20ShortGiEnable
QtechEableType,
qtechWifiDot11radioIfConfig40ShortGiEnable
QtechEableType,
qtechWifiDot11radioIfConfigShortPreambleEnable
QtechEableType,
qtechWifiDot11radioIfConfigSlottime
QtechWifiSlotType,
qtechWifiDot11radioIfConfigRtsThreshold
Integer32,
qtechWifiDot11radioIfConfigFragmentThreshold
Integer32,
qtechWifiDot11radioIfConfigResponseRssi
Integer32,
qtechWifiDot11radioIfConfigEnableQos
QtechEableType,
qtechWifiDot11radioIfConfigEdcaClientBgAifsn
Integer32,
qtechWifiDot11radioIfConfigEdcaClientBgCwmin
Integer32,
qtechWifiDot11radioIfConfigEdcaClientBgCwmax
Integer32,
qtechWifiDot11radioIfConfigEdcaClientBgTxop
Integer32,
qtechWifiDot11radioIfConfigEdcaClientBeAifsn
Integer32,
qtechWifiDot11radioIfConfigEdcaClientBeCwmin
Integer32,
qtechWifiDot11radioIfConfigEdcaClientBeCwmax
Integer32,
qtechWifiDot11radioIfConfigEdcaClientBeTxop
Integer32,
qtechWifiDot11radioIfConfigEdcaClientViAifsn
Integer32,
qtechWifiDot11radioIfConfigEdcaClientViCwmin
Integer32,
qtechWifiDot11radioIfConfigEdcaClientViCwmax
Integer32,
qtechWifiDot11radioIfConfigEdcaClientViTxop
Integer32,
qtechWifiDot11radioIfConfigEdcaClientVoAifsn
Integer32,
qtechWifiDot11radioIfConfigEdcaClientVoCwmin
Integer32,
qtechWifiDot11radioIfConfigEdcaClientVoCwmax
Integer32,
qtechWifiDot11radioIfConfigEdcaClientVoTxop
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioBgAifsn
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioBgCwmin
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioBgCwmax
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioBgTxop
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioBeAifsn
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioBeCwmin
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioBeCwmax
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioBeTxop
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioViAifsn
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioViCwmin
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioViCwmax
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioViTxop
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioVoAifsn
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioVoCwmin
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioVoCwmax
Integer32,
qtechWifiDot11radioIfConfigEdcaRadioVoTxop
Integer32,
qtechWifiDot11radioIfConfigAntennaTransChainmask
Integer32,
qtechWifiDot11radioIfConfigAntennaReceiveChainmask
Integer32,
qtechWifiDot11radioIfConfigBeaconDtimPeriod
Integer32,
qtechWifiDot11radioIfConfigBeaconPeriod
Integer32,
qtechWifiDot11radioIfConfigRetrieShortTime
Integer32,
qtechWifiDot11radioIfConfigRetrieLongTime
Integer32,
qtechWifiDot11radioIfConfigStaIdleTimeout
Integer32,
qtechWifiDot11radioIfConfigWlanIdList
BITS
}
qtechWifiDot11radioIfConfigIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio interface index ."
::= { qtechWifiDot11radioIfConfigEntry 1 }
qtechWifiDot11radioIfConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"create/modify/delete ."
::= { qtechWifiDot11radioIfConfigEntry 2 }
qtechWifiDot11radioIfConfigFreBand OBJECT-TYPE
SYNTAX QtechWifiFreChanelType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio frequency band ."
::= { qtechWifiDot11radioIfConfigEntry 3 }
qtechWifiDot11radioIfConfigChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio work Chanel num."
::= { qtechWifiDot11radioIfConfigEntry 4 }
qtechWifiDot11radioIfConfigChanWidth OBJECT-TYPE
SYNTAX QtechWifiChanWidthType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio Chanel width ."
::= { qtechWifiDot11radioIfConfigEntry 5 }
qtechWifiDot11radioIfConfigCountryCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio country code."
::= { qtechWifiDot11radioIfConfigEntry 6 }
qtechWifiDot11radioIfConfigPowerLocal OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio power local percent."
::= { qtechWifiDot11radioIfConfigEntry 7 }
qtechWifiDot11radioIfConfigWirelessProSupport OBJECT-TYPE
SYNTAX BITS {
null(0),
b(1),
g(2),
n(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio Support wireless protocol ."
::= { qtechWifiDot11radioIfConfigEntry 8 }
qtechWifiDot11radioIfConfigStaLimit OBJECT-TYPE
SYNTAX Integer32(1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio Sta Limit ."
::= { qtechWifiDot11radioIfConfigEntry 9 }
qtechWifiDot11radioIfConfig20ShortGiEnable OBJECT-TYPE
SYNTAX QtechEableType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio 20ShortGi enable."
::= { qtechWifiDot11radioIfConfigEntry 10 }
qtechWifiDot11radioIfConfig40ShortGiEnable OBJECT-TYPE
SYNTAX QtechEableType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio 40ShortGi enable ."
::= { qtechWifiDot11radioIfConfigEntry 11 }
qtechWifiDot11radioIfConfigShortPreambleEnable OBJECT-TYPE
SYNTAX QtechEableType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio ShortPreamble enable ."
::= { qtechWifiDot11radioIfConfigEntry 12 }
qtechWifiDot11radioIfConfigSlottime OBJECT-TYPE
SYNTAX QtechWifiSlotType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio slot time ."
::= { qtechWifiDot11radioIfConfigEntry 13 }
qtechWifiDot11radioIfConfigRtsThreshold OBJECT-TYPE
SYNTAX Integer32(257..2347)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio rts thresholx ."
::= { qtechWifiDot11radioIfConfigEntry 14 }
qtechWifiDot11radioIfConfigFragmentThreshold OBJECT-TYPE
SYNTAX Integer32(256..2346)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio fragment threshold ."
::= { qtechWifiDot11radioIfConfigEntry 15 }
qtechWifiDot11radioIfConfigResponseRssi OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio response rss ."
::= { qtechWifiDot11radioIfConfigEntry 16 }
qtechWifiDot11radioIfConfigEnableQos OBJECT-TYPE
SYNTAX QtechEableType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio qos enable or disable ."
::= { qtechWifiDot11radioIfConfigEntry 17 }
qtechWifiDot11radioIfConfigEdcaClientBgAifsn OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client back-groud aifsn value."
::= { qtechWifiDot11radioIfConfigEntry 18 }
qtechWifiDot11radioIfConfigEdcaClientBgCwmin OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client back-groud cwmin value."
::= { qtechWifiDot11radioIfConfigEntry 19 }
qtechWifiDot11radioIfConfigEdcaClientBgCwmax OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client back-groud cwmax value."
::= { qtechWifiDot11radioIfConfigEntry 20 }
qtechWifiDot11radioIfConfigEdcaClientBgTxop OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client back-groud txop value."
::= { qtechWifiDot11radioIfConfigEntry 21 }
qtechWifiDot11radioIfConfigEdcaClientBeAifsn OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client best-effort aifsn value."
::= { qtechWifiDot11radioIfConfigEntry 22 }
qtechWifiDot11radioIfConfigEdcaClientBeCwmin OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client best-effort cwmin value."
::= { qtechWifiDot11radioIfConfigEntry 23 }
qtechWifiDot11radioIfConfigEdcaClientBeCwmax OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client best-effort cwmax value."
::= { qtechWifiDot11radioIfConfigEntry 24 }
qtechWifiDot11radioIfConfigEdcaClientBeTxop OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client best-effort txop value."
::= { qtechWifiDot11radioIfConfigEntry 25 }
qtechWifiDot11radioIfConfigEdcaClientViAifsn OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client video aifsn value."
::= { qtechWifiDot11radioIfConfigEntry 26 }
qtechWifiDot11radioIfConfigEdcaClientViCwmin OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client video cwmin value."
::= { qtechWifiDot11radioIfConfigEntry 27 }
qtechWifiDot11radioIfConfigEdcaClientViCwmax OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client video cwmax value."
::= { qtechWifiDot11radioIfConfigEntry 28 }
qtechWifiDot11radioIfConfigEdcaClientViTxop OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client video txop value."
::= { qtechWifiDot11radioIfConfigEntry 29 }
qtechWifiDot11radioIfConfigEdcaClientVoAifsn OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client voice aifsn value."
::= { qtechWifiDot11radioIfConfigEntry 30 }
qtechWifiDot11radioIfConfigEdcaClientVoCwmin OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client voice cwmin value."
::= { qtechWifiDot11radioIfConfigEntry 31 }
qtechWifiDot11radioIfConfigEdcaClientVoCwmax OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client voice cwmax value."
::= { qtechWifiDot11radioIfConfigEntry 32 }
qtechWifiDot11radioIfConfigEdcaClientVoTxop OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca client voice txop value."
::= { qtechWifiDot11radioIfConfigEntry 33 }
qtechWifiDot11radioIfConfigEdcaRadioBgAifsn OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio back-groud aifsn value."
::= { qtechWifiDot11radioIfConfigEntry 34 }
qtechWifiDot11radioIfConfigEdcaRadioBgCwmin OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio back-groud cwmin value."
::= { qtechWifiDot11radioIfConfigEntry 35 }
qtechWifiDot11radioIfConfigEdcaRadioBgCwmax OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio back-groud cwmax value."
::= { qtechWifiDot11radioIfConfigEntry 36 }
qtechWifiDot11radioIfConfigEdcaRadioBgTxop OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio back-groud txop value."
::= { qtechWifiDot11radioIfConfigEntry 37 }
qtechWifiDot11radioIfConfigEdcaRadioBeAifsn OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio best-effort aifsn value."
::= { qtechWifiDot11radioIfConfigEntry 38 }
qtechWifiDot11radioIfConfigEdcaRadioBeCwmin OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio best-effort cwmin value."
::= { qtechWifiDot11radioIfConfigEntry 39 }
qtechWifiDot11radioIfConfigEdcaRadioBeCwmax OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio best-effort cwmax value."
::= { qtechWifiDot11radioIfConfigEntry 40 }
qtechWifiDot11radioIfConfigEdcaRadioBeTxop OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio best-effort txop value."
::= { qtechWifiDot11radioIfConfigEntry 41 }
qtechWifiDot11radioIfConfigEdcaRadioViAifsn OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio video aifsn value."
::= { qtechWifiDot11radioIfConfigEntry 42 }
qtechWifiDot11radioIfConfigEdcaRadioViCwmin OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio video cwmin value."
::= { qtechWifiDot11radioIfConfigEntry 43 }
qtechWifiDot11radioIfConfigEdcaRadioViCwmax OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio video cwmax value."
::= { qtechWifiDot11radioIfConfigEntry 44 }
qtechWifiDot11radioIfConfigEdcaRadioViTxop OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio video txop value."
::= { qtechWifiDot11radioIfConfigEntry 45 }
qtechWifiDot11radioIfConfigEdcaRadioVoAifsn OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio voice aifsn value."
::= { qtechWifiDot11radioIfConfigEntry 46 }
qtechWifiDot11radioIfConfigEdcaRadioVoCwmin OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio voice cwmin value."
::= { qtechWifiDot11radioIfConfigEntry 47 }
qtechWifiDot11radioIfConfigEdcaRadioVoCwmax OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio voice cwmax value."
::= { qtechWifiDot11radioIfConfigEntry 48 }
qtechWifiDot11radioIfConfigEdcaRadioVoTxop OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio edca Radio voice txop value."
::= { qtechWifiDot11radioIfConfigEntry 49 }
qtechWifiDot11radioIfConfigAntennaTransChainmask OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio antenna transmit chainmask."
::= { qtechWifiDot11radioIfConfigEntry 50 }
qtechWifiDot11radioIfConfigAntennaReceiveChainmask OBJECT-TYPE
SYNTAX Integer32(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio antenna receive chainmask."
::= { qtechWifiDot11radioIfConfigEntry 51 }
qtechWifiDot11radioIfConfigBeaconDtimPeriod OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio beacon dtim period ."
::= { qtechWifiDot11radioIfConfigEntry 52 }
qtechWifiDot11radioIfConfigBeaconPeriod OBJECT-TYPE
SYNTAX Integer32(200..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio beacon period."
::= { qtechWifiDot11radioIfConfigEntry 53 }
qtechWifiDot11radioIfConfigRetrieShortTime OBJECT-TYPE
SYNTAX Integer32(1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio short frame retrie times."
::= { qtechWifiDot11radioIfConfigEntry 54 }
qtechWifiDot11radioIfConfigRetrieLongTime OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio long frame retrie times."
::= { qtechWifiDot11radioIfConfigEntry 55 }
qtechWifiDot11radioIfConfigStaIdleTimeout OBJECT-TYPE
SYNTAX Integer32(60..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio Station idle timeout"
::= { qtechWifiDot11radioIfConfigEntry 56 }
qtechWifiDot11radioIfConfigWlanIdList OBJECT-TYPE
SYNTAX BITS {
w0(0),
w1(1),
w2(2),
w3(3),
w4(4),
w5(5),
w6(6),
w7(7),
w8(8),
w9(9),
w10(10),
w11(11),
w12(12),
w13(13),
w14(14),
w15(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Dot11radio Station idle timeout"
::= { qtechWifiDot11radioIfConfigEntry 57 }
-- End Dot11radio interface config objects
-- Start Dot11radio interface apply objects
-- qtechWifiDot11radioIfApplyTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF QtechWifiDot11radioIfApplyEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "A table of wifi Dot11radio interface wlan Apply."
-- ::= { qtechWifiDot11radioIfApplyObjects 1 }
--
-- qtechWifiDot11radioIfApplyEntry OBJECT-TYPE
-- SYNTAX QtechWifiDot11radioIfApplyEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "wifi Dot11radio interface Apply entry."
-- INDEX { qtechWifiDot11radioIfApplyIfIndex }
-- ::= { qtechWifiDot11radioIfApplyTable 1 }
--
--
-- QtechWifiDot11radioIfApplyEntry ::=
-- SEQUENCE {
-- qtechWifiDot11radioIfApplyIfIndex
-- Integer32,
-- qtechWifiDot11radioIfApplyRowStatus
-- RowStatus,
-- qtechWifiDot11radioIfApplyVlanId
-- Integer32,
-- qtechWifiDot11radioIfApplyIpAddress
-- IpAddress,
-- qtechWifiDot11radioIfApplyMaskAddress
-- IpAddress,
-- qtechWifiDot11radioIfApplyStaDhcpEnable
-- QtechEableType,
-- qtechWifiDot11radioIfApplyStaNatEnable
-- QtechEableType
-- }
--
-- qtechWifiDot11radioIfApplyIfIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The Dot11radio interface Apply index ."
-- ::= { qtechWifiDot11radioIfApplyEntry 1 }
--
-- qtechWifiDot11radioIfApplyRowStatus OBJECT-TYPE
-- SYNTAX RowStatus
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The Dot11radio interface Apply/delete."
-- ::= { qtechWifiDot11radioIfApplyEntry 2 }
--
-- qtechWifiDot11radioIfApplyVlanId OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The Dot11radio interface Apply vlan id."
-- ::= { qtechWifiDot11radioIfApplyEntry 3 }
--
-- qtechWifiDot11radioIfApplyIpAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The Dot11radio interface Apply station ip address ."
-- ::= { qtechWifiDot11radioIfApplyEntry 4 }
--
-- qtechWifiDot11radioIfApplyMaskAddress OBJECT-TYPE
-- SYNTAX IpAddress
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The Dot11radio interface Apply station ip address mask ."
-- ::= { qtechWifiDot11radioIfApplyEntry 5 }
--
-- qtechWifiDot11radioIfApplyStaDhcpEnable OBJECT-TYPE
-- SYNTAX QtechEableType
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The Dot11radio interface Apply station dhcp enable ."
-- ::= { qtechWifiDot11radioIfApplyEntry 6 }
--
-- qtechWifiDot11radioIfApplyStaNatEnable OBJECT-TYPE
-- SYNTAX QtechEableType
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
-- "The Dot11radio interface Apply station nat enable ."
-- ::= { qtechWifiDot11radioIfApplyEntry 7 }
-- End Dot11radio interface apply objects
-- Start Wlan associate objects
qtechWifiWlanAssociateTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechWifiWlanAssociateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of wifi wlan associate infromation."
::= { qtechWifiWlanAssociateObjects 1 }
qtechWifiWlanAssociateEntry OBJECT-TYPE
SYNTAX QtechWifiWlanAssociateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"wifi wlan associate infromation entry."
INDEX {qtechWifiWlanAssociateWlanId ,qtechWifiWlanAssociateStaMacAdress}
::= { qtechWifiWlanAssociateTable 1 }
QtechWifiWlanAssociateEntry ::=
SEQUENCE {
qtechWifiWlanAssociateWlanId
Integer32,
qtechWifiWlanAssociateStaMacAdress
DisplayString,
qtechWifiWlanAssociateSsidName
DisplayString,
qtechWifiWlanAssociateStaIpAdress
IpAddress,
qtechWifiWlanAssociateStaMaskAdress
IpAddress,
qtechWifiWlanAssociateStaSigalStrength
Integer32,
qtechWifiWlanAssociateStaConnectTime
DisplayString,
qtechWifiWlanAssociateStaConnectTimeLength
DisplayString,
qtechWifiWlanAssociateStaGate
IpAddress,
qtechWifiWlanAssociateStaDns
IpAddress
}
qtechWifiWlanAssociateWlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio wlan id ."
::= { qtechWifiWlanAssociateEntry 1 }
qtechWifiWlanAssociateStaMacAdress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio mac address ."
::= { qtechWifiWlanAssociateEntry 2 }
qtechWifiWlanAssociateSsidName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio ssid name ."
::= { qtechWifiWlanAssociateEntry 3 }
qtechWifiWlanAssociateStaIpAdress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio associate station ip ."
::= { qtechWifiWlanAssociateEntry 4 }
qtechWifiWlanAssociateStaMaskAdress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio associate station mask address."
::= { qtechWifiWlanAssociateEntry 5 }
qtechWifiWlanAssociateStaSigalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio associate signal strength ."
::= { qtechWifiWlanAssociateEntry 6 }
qtechWifiWlanAssociateStaConnectTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio associate station time ."
::= { qtechWifiWlanAssociateEntry 7 }
qtechWifiWlanAssociateStaConnectTimeLength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio associate station time length ."
::= { qtechWifiWlanAssociateEntry 8 }
qtechWifiWlanAssociateStaGate OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio associate station gate address ."
::= { qtechWifiWlanAssociateEntry 9 }
qtechWifiWlanAssociateStaDns OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Dot11radio associate station dns address ."
::= { qtechWifiWlanAssociateEntry 10 }
-- End Wlan associate objects
END
-- End module