WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/qtech/QTECH-ROUTER-QOS-MIB

4077 lines
147 KiB
Plaintext
Raw Blame History

-- ****************************************************************
-- Qtech Class-Based QoS Configuration and Statistics MIB
--
-- March 2012, Luo Junxin
--
-- Copyright (c) 2012 by Qtech Networks Co.,Ltd.
-- All rights reserved.
--
-- ****************************************************************
-- Start module
QTECH-ROUTER-QOS-MIB DEFINITIONS ::= BEGIN
-- Start external defined node
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
Gauge32,
Unsigned32,
Counter64
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
DisplayString,
MacAddress,
RowStatus,
TruthValue
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
qtechMgmt
FROM QTECH-SMI;
-- End external defined node
-- Start root node
qtechRouterQoSMIB MODULE-IDENTITY
LAST-UPDATED "201202270000Z"
ORGANIZATION "Qtech Networks Co.,Ltd."
CONTACT-INFO
"
E-mail: service@qtech.com.cn"
DESCRIPTION
"This module defines qtech QoS(Quality of Service) mibs."
REVISION "201112200000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { qtechMgmt 106}
QtechCosType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Class of service type."
SYNTAX INTEGER {
cos-be(1),
cos-af1(2),
cos-af2(3),
cos-af3(4),
cos-af4(5),
cos-ef(6),
cos-cs6(7),
cos-cs7(8)
}
QtechQType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Queue type."
SYNTAX INTEGER {
q-lpq(1),
q-wfq(2),
q-pq(3)
}
QtechQDirectionType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Direction type."
SYNTAX INTEGER {
d-input(1),
d-output(2)
}
QtechLayerType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Layer type to apply match rule."
SYNTAX INTEGER {
link-layer(1),
all-layer(2)
}
-- End root node
qtechCBQoSMIBObjects OBJECT IDENTIFIER ::= { qtechRouterQoSMIB 1 }
qtechIfQoSMIBObjects OBJECT IDENTIFIER ::= { qtechRouterQoSMIB 2 }
qtechHQoSMIBObjects OBJECT IDENTIFIER ::= { qtechRouterQoSMIB 3 }
-- CBQoS MIB
-- Node definitions
-- Interface: policy Running statistics information
qtechCBQoSIfStaticsObjects OBJECT IDENTIFIER ::= { qtechCBQoSMIBObjects 1 }
-- Interface CBWFQ statistics
qtechCBQoSIfCbwfqRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechCBQoSIfCbwfqRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of interface CBWFQ Running statistics. When policy using queue behavior is applied on
interface the interface will using Class Base Weighted Fair Queueing."
::= { qtechCBQoSIfStaticsObjects 1 }
qtechCBQoSIfCbwfqRunInfoEntry OBJECT-TYPE
SYNTAX QtechCBQoSIfCbwfqRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface CBWFQ statistics entry."
INDEX { qtechCBQoSIfCbwfqPolicyIfIndex }
::= { qtechCBQoSIfCbwfqRunInfoTable 1 }
QtechCBQoSIfCbwfqRunInfoEntry ::=
SEQUENCE {
qtechCBQoSIfCbwfqPolicyIfIndex
Integer32,
qtechCBQoSIfCbwfqQueueSize
Integer32,
qtechCBQoSIfCbwfqDiscard
Counter64,
qtechCBQoSIfCbwfqEfQueueSize
Integer32,
qtechCBQoSIfCbwfqAfQueueSize
Integer32,
qtechCBQoSIfCbwfqBeQueueSize
Integer32,
qtechCBQoSIfCbwfqBeActiveQueueNum
Integer32,
qtechCBQoSIfCbwfqBeMaxActiveQueueNum
Integer32,
qtechCBQoSIfCbwfqBeTotalQueueNum
Integer32,
qtechCBQoSIfCbwfqAfAllocatedQueueNum
Integer32
}
qtechCBQoSIfCbwfqPolicyIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index"
::= { qtechCBQoSIfCbwfqRunInfoEntry 1 }
qtechCBQoSIfCbwfqQueueSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Queue size of CBWFQ"
::= { qtechCBQoSIfCbwfqRunInfoEntry 2 }
qtechCBQoSIfCbwfqDiscard OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded packets which coundn't be enqueued."
::= { qtechCBQoSIfCbwfqRunInfoEntry 3 }
qtechCBQoSIfCbwfqEfQueueSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Queue size of EF"
::= { qtechCBQoSIfCbwfqRunInfoEntry 4 }
qtechCBQoSIfCbwfqAfQueueSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Queue size of AF"
::= { qtechCBQoSIfCbwfqRunInfoEntry 5}
qtechCBQoSIfCbwfqBeQueueSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Queue size of BE"
::= { qtechCBQoSIfCbwfqRunInfoEntry 6 }
qtechCBQoSIfCbwfqBeActiveQueueNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the number of Active Be Queue"
::= { qtechCBQoSIfCbwfqRunInfoEntry 7 }
qtechCBQoSIfCbwfqBeMaxActiveQueueNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the max number of Active Be Queue"
::= { qtechCBQoSIfCbwfqRunInfoEntry 8 }
qtechCBQoSIfCbwfqBeTotalQueueNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the total number of Be Queue"
::= { qtechCBQoSIfCbwfqRunInfoEntry 9 }
qtechCBQoSIfCbwfqAfAllocatedQueueNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the Allocated number of Af Queue"
::= { qtechCBQoSIfCbwfqRunInfoEntry 10 }
-- Class match statistics
qtechCBQoSIfClassMatchRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechCBQoSIfClassMatchRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running statistics for matching a classifier
in a QoS policy applied on the interface."
::= { qtechCBQoSIfStaticsObjects 2 }
qtechCBQoSIfClassMatchRunInfoEntry OBJECT-TYPE
SYNTAX QtechCBQoSIfClassMatchRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Classifier's matching statistics information entry."
INDEX { qtechCBQoSIfClassMatchIfIndex, qtechCBQoSIfClassMatchPolicyDirection, qtechCBQoSIfClassMatchClassIndex }
::= { qtechCBQoSIfClassMatchRunInfoTable 1 }
QtechCBQoSIfClassMatchRunInfoEntry ::=
SEQUENCE {
qtechCBQoSIfClassMatchIfIndex
Integer32,
qtechCBQoSIfClassMatchPolicyDirection
INTEGER,
qtechCBQoSIfClassMatchClassIndex
Integer32,
qtechCBQoSIfClassMatchedPackets
Counter64,
qtechCBQoSIfClassMatchedBytes
Counter64,
qtechCBQosIfClassPassedPackets
Counter64,
qtechCBQosIfClassDroppedPackets
Counter64
}
qtechCBQoSIfClassMatchIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the interface index"
::= { qtechCBQoSIfClassMatchRunInfoEntry 1 }
qtechCBQoSIfClassMatchPolicyDirection OBJECT-TYPE
SYNTAX INTEGER
{
input(1),
output(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the direction of policy-map."
::= { qtechCBQoSIfClassMatchRunInfoEntry 2 }
qtechCBQoSIfClassMatchClassIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"class index in the policy-map."
::= { qtechCBQoSIfClassMatchRunInfoEntry 3 }
qtechCBQoSIfClassMatchedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets matching a class in a QoS policy."
::= { qtechCBQoSIfClassMatchRunInfoEntry 4 }
qtechCBQoSIfClassMatchedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes matching a class in a QoS policy."
::= { qtechCBQoSIfClassMatchRunInfoEntry 5 }
qtechCBQosIfClassPassedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of passed packets matching a class in a QoS policy."
::= { qtechCBQoSIfClassMatchRunInfoEntry 6 }
qtechCBQosIfClassDroppedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of dropped packets matching a class in a QoS policy."
::= { qtechCBQoSIfClassMatchRunInfoEntry 7 }
-- CAR statistics
qtechCBQoSIfCarRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechCBQoSIfCarRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running statistics for CAR in a QoS policy applied on the interface."
::= { qtechCBQoSIfStaticsObjects 3 }
qtechCBQoSIfCarRunInfoEntry OBJECT-TYPE
SYNTAX QtechCBQoSIfCarRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CAR statistics information entry."
INDEX { qtechCBQoSIfCarIfIndex, qtechCBQoSIfCarPolicyDirection, qtechCBQoSIfCarClassIndex }
::= { qtechCBQoSIfCarRunInfoTable 1 }
QtechCBQoSIfCarRunInfoEntry ::=
SEQUENCE {
qtechCBQoSIfCarIfIndex
Integer32,
qtechCBQoSIfCarPolicyDirection
INTEGER,
qtechCBQoSIfCarClassIndex
Integer32,
qtechCBQoSIfCarConformedPackets
Counter64,
qtechCBQoSIfCarConformedBytes
Counter64,
qtechCBQoSIfCarExceededPackets
Counter64,
qtechCBQoSIfCarExceededBytes
Counter64,
qtechCBQoSIfCarViolatedPackets
Counter64,
qtechCBQoSIfCarViolatedBytes
Counter64
}
qtechCBQoSIfCarIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the interface index"
::= { qtechCBQoSIfCarRunInfoEntry 1 }
qtechCBQoSIfCarPolicyDirection OBJECT-TYPE
SYNTAX INTEGER
{
input(1),
output(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the direction of policy-map."
::= { qtechCBQoSIfCarRunInfoEntry 2 }
qtechCBQoSIfCarClassIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"class index in the policy-map."
::= { qtechCBQoSIfCarRunInfoEntry 3 }
qtechCBQoSIfCarConformedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"packets of conformed"
::= { qtechCBQoSIfCarRunInfoEntry 4 }
qtechCBQoSIfCarConformedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bytes of conformed"
::= { qtechCBQoSIfCarRunInfoEntry 5 }
qtechCBQoSIfCarExceededPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"packets of exceeded"
::= { qtechCBQoSIfCarRunInfoEntry 6 }
qtechCBQoSIfCarExceededBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bytes of exceeded"
::= { qtechCBQoSIfCarRunInfoEntry 7 }
qtechCBQoSIfCarViolatedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"packets of violated"
::= { qtechCBQoSIfCarRunInfoEntry 8 }
qtechCBQoSIfCarViolatedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bytes of violated"
::= { qtechCBQoSIfCarRunInfoEntry 9 }
-- Remark statistics
qtechCBQoSIfRemarkRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechCBQoSIfRemarkRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running statistics for remarking in a QoS policy applied on the interface."
::= { qtechCBQoSIfStaticsObjects 4 }
qtechCBQoSIfRemarkRunInfoEntry OBJECT-TYPE
SYNTAX QtechCBQoSIfRemarkRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Remarking statistics entry."
INDEX { qtechCBQoSIfRemarkIfIndex, qtechCBQoSIfRemarkPolicyDirection, qtechCBQoSIfRemarkClassIndex }
::= { qtechCBQoSIfRemarkRunInfoTable 1 }
QtechCBQoSIfRemarkRunInfoEntry ::=
SEQUENCE {
qtechCBQoSIfRemarkIfIndex
Integer32,
qtechCBQoSIfRemarkPolicyDirection
INTEGER,
qtechCBQoSIfRemarkClassIndex
Integer32,
qtechCBQoSIfRemarkedPackets
Counter64,
qtechCBQoSIfRemarkedBytes
Counter64
}
qtechCBQoSIfRemarkIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the interface index"
::= { qtechCBQoSIfRemarkRunInfoEntry 1 }
qtechCBQoSIfRemarkPolicyDirection OBJECT-TYPE
SYNTAX INTEGER
{
input(1),
output(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the direction of policy-map."
::= { qtechCBQoSIfRemarkRunInfoEntry 2 }
qtechCBQoSIfRemarkClassIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"class index in the policy-map."
::= { qtechCBQoSIfRemarkRunInfoEntry 3 }
qtechCBQoSIfRemarkedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets remarked."
::= { qtechCBQoSIfRemarkRunInfoEntry 4 }
qtechCBQoSIfRemarkedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes remarked."
::= { qtechCBQoSIfRemarkRunInfoEntry 5 }
-- Queue statistics
qtechCBQoSIfQueueRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechCBQoSIfQueueRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running statistics for queue in a QoS policy applied on the interface."
::= { qtechCBQoSIfStaticsObjects 5 }
qtechCBQoSIfQueueRunInfoEntry OBJECT-TYPE
SYNTAX QtechCBQoSIfQueueRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queue statistics entry."
INDEX { qtechCBQoSIfQueueIfIndex, qtechCBQoSIfQueuePolicyDirection, qtechCBQoSIfQueueClassIndex }
::= { qtechCBQoSIfQueueRunInfoTable 1 }
QtechCBQoSIfQueueRunInfoEntry ::=
SEQUENCE {
qtechCBQoSIfQueueIfIndex
Integer32,
qtechCBQoSIfQueuePolicyDirection
INTEGER,
qtechCBQoSIfQueueClassIndex
Integer32,
qtechCBQoSIfQueueMatchedPackets
Counter64,
qtechCBQoSIfQueueMatchedBytes
Counter64,
qtechCBQoSIfQueueEnqueuedPackets
Counter64,
qtechCBQoSIfQueueEnqueuedBytes
Counter64,
qtechCBQoSIfQueueDiscardedPackets
Counter64,
qtechCBQoSIfQueueDiscardedBytes
Counter64
}
qtechCBQoSIfQueueIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the interface index"
::= { qtechCBQoSIfQueueRunInfoEntry 1 }
qtechCBQoSIfQueuePolicyDirection OBJECT-TYPE
SYNTAX INTEGER
{
input(1),
output(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the direction of policy-map."
::= { qtechCBQoSIfQueueRunInfoEntry 2 }
qtechCBQoSIfQueueClassIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"class index in the policy-map."
::= { qtechCBQoSIfQueueRunInfoEntry 3 }
qtechCBQoSIfQueueMatchedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets matched to enqueue."
::= { qtechCBQoSIfQueueRunInfoEntry 4 }
qtechCBQoSIfQueueMatchedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes matched to enqueue."
::= { qtechCBQoSIfQueueRunInfoEntry 5 }
qtechCBQoSIfQueueEnqueuedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets enqueued."
::= { qtechCBQoSIfQueueRunInfoEntry 6 }
qtechCBQoSIfQueueEnqueuedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes enqueued."
::= { qtechCBQoSIfQueueRunInfoEntry 7 }
qtechCBQoSIfQueueDiscardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets discarded when enqueued by discard method."
::= { qtechCBQoSIfQueueRunInfoEntry 8 }
qtechCBQoSIfQueueDiscardedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes discarded when enqueued by discard method."
::= { qtechCBQoSIfQueueRunInfoEntry 9 }
-- WRED statistics
qtechCBQoSIfWredRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechCBQoSIfWredRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running statistics for WRED in a QoS policy applied on the interface."
::= { qtechCBQoSIfStaticsObjects 6 }
qtechCBQoSIfWredRunInfoEntry OBJECT-TYPE
SYNTAX QtechCBQoSIfWredRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WRED statistics entry."
INDEX { qtechCBQoSIfWredIfIndex, qtechCBQoSIfWredClassIndex, qtechCBQoSIfWredClassValue }
::= { qtechCBQoSIfWredRunInfoTable 1 }
QtechCBQoSIfWredRunInfoEntry ::=
SEQUENCE {
qtechCBQoSIfWredIfIndex
Integer32,
qtechCBQoSIfWredClassIndex
Integer32,
qtechCBQoSIfWredClassValue
Integer32,
qtechCBQoSIfWredRandomDiscardedPackets
Counter64,
qtechCBQoSIfWredTailDiscardedPackets
Counter64
}
qtechCBQoSIfWredIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the interface index."
::= { qtechCBQoSIfWredRunInfoEntry 1 }
qtechCBQoSIfWredClassIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the direction of policy-map."
::= { qtechCBQoSIfWredRunInfoEntry 2 }
qtechCBQoSIfWredClassValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"dscp/prec value."
::= { qtechCBQoSIfWredRunInfoEntry 3 }
qtechCBQoSIfWredRandomDiscardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets that random-discarded by WRED."
::= { qtechCBQoSIfWredRunInfoEntry 4 }
qtechCBQoSIfWredTailDiscardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets that tail-discarded by WRED."
::= { qtechCBQoSIfWredRunInfoEntry 5 }
-- End CBQoS MIB
-- Begin IF QoS MIB
-- qos pq / display qos pq interface 6
qtechIfQosPQRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechIfQosPQRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PQ(Priority Queuing) table
PQ is a kind of queuing strategy applied on interface for congestion management.
PQ provides a mechanism to prioritize packets sent on an interface.
If the specified priority list is applied to an interface the Priority Queuing strategy
is applied on this interface. Only one list can be assigned per interface.
This table is about the PQ configuration and running infomation."
::= { qtechIfQoSMIBObjects 1 }
qtechIfQosPQRunInfoEntry OBJECT-TYPE
SYNTAX QtechIfQosPQRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PQ configuration and running infomation"
INDEX { qtechIfQosPQIfIndex }
::= { qtechIfQosPQRunInfoTable 1 }
QtechIfQosPQRunInfoEntry ::=
SEQUENCE {
qtechIfQosPQIfIndex
Integer32,
qtechIfQosPQListNum
Integer32,
qtechIfQosPQIfName
OCTET STRING,
qtechIfQosPQHighPkt
Integer32,
qtechIfQosPQHighDiscard
Counter32,
qtechIfQosPQHighMaxQueLen
Integer32,
qtechIfQosPQMiddlePkt
Integer32,
qtechIfQosPQMiddleDiscard
Counter32,
qtechIfQosPQMiddleMaxQueLen
Integer32,
qtechIfQosPQNormalPkt
Integer32,
qtechIfQosPQNormalDiscard
Counter32,
qtechIfQosPQNormalMaxQueLen
Integer32,
qtechIfQosPQLowPkt
Integer32,
qtechIfQosPQLowDiscard
Counter32,
qtechIfQosPQLowMaxQueLen
Integer32
}
qtechIfQosPQIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of table, which is the index of interface applying Priority Queuing strategy.
The interface identified by the value of this index is the same interface
as identified by the same value of ifIndex."
::= { qtechIfQosPQRunInfoEntry 1 }
qtechIfQosPQListNum OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PQL applied to an interface identified by the value of qosPQIfIndex."
::= { qtechIfQosPQRunInfoEntry 2 }
qtechIfQosPQIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the interface by the value of qosPQIfIndex.
It's a textual string containing information about the interface type and the interface number."
::= { qtechIfQosPQRunInfoEntry 3 }
qtechIfQosPQHighPkt OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets enqueued the high priority queue when congestion occoured in the interface."
::= { qtechIfQosPQRunInfoEntry 4 }
qtechIfQosPQHighDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of discarded packets which can't be enqueued high priority queue because the high priority queue is full."
::= { qtechIfQosPQRunInfoEntry 5 }
qtechIfQosPQHighMaxQueLen OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum length of high priority queue.
The default value of maximum queue length is 20."
::= { qtechIfQosPQRunInfoEntry 6 }
qtechIfQosPQMiddlePkt OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets enqueued the middle priority queue when congestion occoured in the interface."
::= { qtechIfQosPQRunInfoEntry 7 }
qtechIfQosPQMiddleDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of discarded packets which can't be enqueued middle priority queue because the middle priority queue is full."
::= { qtechIfQosPQRunInfoEntry 8 }
qtechIfQosPQMiddleMaxQueLen OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum length of middle priority queue. The default value of maximum queue length is 40."
::= { qtechIfQosPQRunInfoEntry 9 }
qtechIfQosPQNormalPkt OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets enqueued the normal priority queue when congestion occoured in the interface."
::= { qtechIfQosPQRunInfoEntry 10 }
qtechIfQosPQNormalDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of discarded packets which can't be enqueued normal priority queue because the normal priority queue is full."
::= { qtechIfQosPQRunInfoEntry 11 }
qtechIfQosPQNormalMaxQueLen OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum length of normal priority queue.
The default value of maximum queue length is 60."
::= { qtechIfQosPQRunInfoEntry 12 }
qtechIfQosPQLowPkt OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets enqueued the bottom priority queue when congestion occoured in the interface."
::= { qtechIfQosPQRunInfoEntry 13 }
qtechIfQosPQLowDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of discarded packets which can't be enqueued low priority queue because the low priority queue is full."
::= { qtechIfQosPQRunInfoEntry 14 }
qtechIfQosPQLowMaxQueLen OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum length of low priority queue. The default value of maximum queue length is 80."
::= { qtechIfQosPQRunInfoEntry 15 }
-- display qos cq interface 2
qtechIfQosCQRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechIfQosCQRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CQ(Custom Queuing) statistics table
This table is about the running infomation of CQ applied on interface for congestion management."
::= { qtechIfQoSMIBObjects 2 }
qtechIfQosCQRunInfoEntry OBJECT-TYPE
SYNTAX QtechIfQosCQRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CQ running infomation"
INDEX { qtechIfQosCQRunInfoIfIndex, qtechIfQosCQRunInfoQueNum }
::= { qtechIfQosCQRunInfoTable 1 }
QtechIfQosCQRunInfoEntry ::=
SEQUENCE {
qtechIfQosCQRunInfoIfIndex
Integer32,
qtechIfQosCQRunInfoQueNum
Integer32,
qtechIfQosCQRunInfoIfName
OCTET STRING,
qtechIfQosCQRunInfoQuePkt
Integer32,
qtechIfQosCQRunInfoQueDiscard
Counter32,
qtechIfQosCQRunInfoMaxQueLen
Integer32
}
qtechIfQosCQRunInfoIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table, which is the index of interface applying Custom Queuing strategy.
The interface identified by the value of this index is the same interface
as identified by the same value of ifIndex."
::= { qtechIfQosCQRunInfoEntry 1 }
qtechIfQosCQRunInfoQueNum OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table, which is the custom queue number"
::= { qtechIfQosCQRunInfoEntry 2 }
qtechIfQosCQRunInfoIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the interface by the value of qosCQRunInfoIfIndex.
It's a textual string containing information about the interface type and the interface number."
::= { qtechIfQosCQRunInfoEntry 3 }
qtechIfQosCQRunInfoQuePkt OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets enqueued the spceified custom queue when congestion occoured in the interface."
::= { qtechIfQosCQRunInfoEntry 4 }
qtechIfQosCQRunInfoQueDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of discarded packets which can't be enqueued the specified custom queue because the custom queue is full."
::= { qtechIfQosCQRunInfoEntry 5 }
qtechIfQosCQRunInfoMaxQueLen OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum length of the specified queue.
The default value of maximum queue length is 20."
::= { qtechIfQosCQRunInfoEntry 6 }
-- qos wfq / display qos wfq interface 13
qtechIfQosWFQRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechIfQosWFQRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WFQ(Weighted Fair Queuing) table
WFQ is a kind of queuing strategy applied on interface for congestion management.
With WFQ, packets are classified by flow. For example, packets with the same source IP address,
destination IP address, source TCP or UDP port, destination TCP or UDP port, and protocol
belong to the same flow.
When enabled for an interface, WFQ provides traffic priority management that automatically sorts
among individual traffic flows without requiring first defined match rule lists.
This table is about the WFQ configuration and running infomation."
::= { qtechIfQoSMIBObjects 3 }
qtechIfQosWFQRunInfoEntry OBJECT-TYPE
SYNTAX QtechIfQosWFQRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WFQ configuration and running infomation"
INDEX { qtechIfQosWFQIfIndex }
::= { qtechIfQosWFQRunInfoTable 1 }
QtechIfQosWFQRunInfoEntry ::=
SEQUENCE {
qtechIfQosWFQIfIndex
Integer32,
qtechIfQosWFQIfName
OCTET STRING,
qtechIfQosWFQMaxQueLen
Integer32,
qtechIfQosWFQTotalQueNum
INTEGER,
qtechIfQosWFQCurQueLen
Integer32,
qtechIfQosWFQTotalDiscard
Counter32,
qtechIfQosWFQActiveQueNum
Integer32,
qtechIfQosWFQMaxActiveQueNum
Integer32
}
qtechIfQosWFQIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table, which is the index of interface applying Weighted Fair Queuing strategy.
The interface identified by the value of this index is the same interface
as identified by the same value of ifIndex."
::= { qtechIfQosWFQRunInfoEntry 1 }
qtechIfQosWFQIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the interface by the value of qosWFQIfIndex.
It's a textual string containing information about the interface type and the interface number."
::= { qtechIfQosWFQRunInfoEntry 2 }
qtechIfQosWFQMaxQueLen OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum length of the queue."
::= { qtechIfQosWFQRunInfoEntry 3 }
qtechIfQosWFQTotalQueNum OBJECT-TYPE
SYNTAX INTEGER
{
a16(16),
a32(32),
a64(64),
a128(128),
a256(256),
a512(512),
a1024(1024),
a2048(2048),
a4096(4096)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of queues. The default value is a256(256)."
::= { qtechIfQosWFQRunInfoEntry 4 }
qtechIfQosWFQCurQueLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of packets enqueued all the queues when congestion occoured in the interface."
::= { qtechIfQosWFQRunInfoEntry 5 }
qtechIfQosWFQTotalDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of discarded packets which can't be enqueued all the queues
because the queue is full."
::= { qtechIfQosWFQRunInfoEntry 6 }
qtechIfQosWFQActiveQueNum OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A queue becomes active when the queue is not empty.
The count of current active queues when WFQ was enabled in the interface."
::= { qtechIfQosWFQRunInfoEntry 7 }
qtechIfQosWFQMaxActiveQueNum OBJECT-TYPE
SYNTAX Integer32 (0..32767)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum count of active queues.
It is the count of active queues that have occurred since WFQ was enabled in the interface."
::= { qtechIfQosWFQRunInfoEntry 8 }
-- WRED statistics
qtechIfQosWredRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechIfQosWredRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running statistics for WRED in the interface."
::= { qtechIfQoSMIBObjects 4 }
qtechIfQosWredRunInfoEntry OBJECT-TYPE
SYNTAX QtechIfQosWredRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WRED statistics entry."
INDEX { qtechIfQosWredIfIndex, qtechIfQosWredValue }
::= { qtechIfQosWredRunInfoTable 1 }
QtechIfQosWredRunInfoEntry ::=
SEQUENCE {
qtechIfQosWredIfIndex
Integer32,
qtechIfQosWredValue
Integer32,
qtechIfQosWredRandomDiscardedPackets
Counter64,
qtechIfQosWredTailDiscardedPackets
Counter64
}
qtechIfQosWredIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table, which is the index of interface applying WRED."
::= { qtechIfQosWredRunInfoEntry 1 }
qtechIfQosWredValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the dscp/prec value."
::= { qtechIfQosWredRunInfoEntry 2 }
qtechIfQosWredRandomDiscardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets that random-discarded by WRED."
::= { qtechIfQosWredRunInfoEntry 3 }
qtechIfQosWredTailDiscardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets that tail-discarded by WRED."
::= { qtechIfQosWredRunInfoEntry 4 }
-- qos car / display qos car interface 17
-- the CAR table
-- CAR(Committed Access Rate) is the feature for limiting the traffic to a committed rate.
-- The CAR table contains configuration and running information of the CAR policy
-- which applied on an interface.
qtechIfQosCARTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechIfQosCAREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CAR(Committed Access Rate) table"
::= { qtechIfQoSMIBObjects 5 }
qtechIfQosCAREntry OBJECT-TYPE
SYNTAX QtechIfQosCAREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CAR configuration and running infomation."
INDEX { qtechIfQosCARIfIndex, qtechIfQosCARPktDirection, qtechIfQosCARindex }
::= { qtechIfQosCARTable 1 }
QtechIfQosCAREntry ::=
SEQUENCE {
qtechIfQosCARIfIndex
Integer32,
qtechIfQosCARIfName
OCTET STRING,
qtechIfQosCARPktDirection
INTEGER,
qtechIfQosCARType
INTEGER,
qtechIfQosCARListNum
Integer32,
qtechIfQosCARindex
Integer32,
qtechIfQosCARCIR
Integer32,
qtechIfQosCARBurstSize
Integer32,
qtechIfQosCARExcessBurstSize
Integer32,
qtechIfQosCARConformAction
INTEGER,
qtechIfQosCARExceedAction
INTEGER,
qtechIfQosCARConformNewPrec
Integer32,
qtechIfQosCARExceedNewPrec
Integer32,
qtechIfQosCARConformPkt
Counter32,
qtechIfQosCARConformByte
Counter32,
qtechIfQosCARExceedPkt
Counter32,
qtechIfQosCARExceedByte
Counter32
}
qtechIfQosCARIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One of the index of the CAR table. This is the index of the interface on which CAR policy applied."
::= { qtechIfQosCAREntry 1 }
qtechIfQosCARIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the interface."
::= { qtechIfQosCAREntry 2 }
qtechIfQosCARPktDirection OBJECT-TYPE
SYNTAX INTEGER
{
input(1),
outout(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One of the index of the CAR table. This is the direction of traffic.
There are two directions: input(1) and output(2)."
::= { qtechIfQosCAREntry 3 }
qtechIfQosCARType OBJECT-TYPE
SYNTAX INTEGER
{
acl(1),
dscp(2),
qos-group(3),
default(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the matching type for the traffic.
The value acl(1) means that the traffic matching the
configured ACL is applicable to the CAR policy.
The value dscp(2) means that the traffic matching the
configured DSCP is applicable to the CAR policy.
The value qos-group(3) means that the traffic matching the
configured QOS-GROUP is applicable to the CAR policy.
The value default(4) means that the traffic matching the
default setting is applicable to the CAR policy."
::= { qtechIfQosCAREntry 4 }
qtechIfQosCARListNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the ACL number, DSCP number or QOS-GROUP number.
When CARType=1,this number is ACL number;
When CARType=2,this number is DSCP number;
When CARType=3,this number is QOS-GROUP number."
::= { qtechIfQosCAREntry 5 }
qtechIfQosCARindex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One of the index of the CAR table. This is the index of the configured CAR policy. "
::= { qtechIfQosCAREntry 6 }
qtechIfQosCARCIR OBJECT-TYPE
SYNTAX Integer32 (8000..155000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Committed Information Rate.
Unit: bps. This is the target rate which the CAR policy limits. "
::= { qtechIfQosCAREntry 7 }
qtechIfQosCARBurstSize OBJECT-TYPE
SYNTAX Integer32 (15000..155000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Burst traffic size. Unit: bit.
This is the amount of traffic in excess of the committed information
rate that will be permitted by the CAR policy."
::= { qtechIfQosCAREntry 8 }
qtechIfQosCARExcessBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..155000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Excess Burst Size. Unit: bit.
This is the amount of traffic in excess of the burst size,
which may be conditionally permitted by the CAR policy."
::= { qtechIfQosCAREntry 9 }
qtechIfQosCARConformAction OBJECT-TYPE
SYNTAX INTEGER
{
continue(1),
drop(2),
set-dscp-continue(3),
set-dscp-transmit(4),
set-prec-continue(5),
set-prec-transmit(6),
transmit(7),
set-mpls-exp-continue(8),
set-mpls-exp-transmit(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken by the traffic, when the traffic conforms CIR.
There are the following actions:
Continue(1) -- Continue to be processed by the following
CAR policy which applied on the interface.
drop(2) -- Discard the packet.
set-dscp-continue(3) -- Remark the IP dscp of IP packet,
and then continue to be processed by
the following CAR policy.,
set-dscp-transmit(4) -- Remark the IP dscp of IP packet,
and then send the packet.
set-prec-continue(5) -- Remark the IP precedence of IP packet,
and then continue to be processed by
the following CAR policy.
set-prec-transmit(6) -- Remark the IP precedence of IP packet,
and then send the packet.
transmit(7) -- Send the packet directly.
set-mpls-exp-continue(8) -- Remark the mpls exp field of mpls packet,
and then continue to be processed by
the following CAR policy.
set-mpls-exp-transmit(9) -- Remark the mpls exp field of mpls packet,
and then send the packet.
"
::= { qtechIfQosCAREntry 10 }
qtechIfQosCARExceedAction OBJECT-TYPE
SYNTAX INTEGER
{
continue(1),
drop(2),
set-dscp-continue(3),
set-dscp-transmit(4),
set-prec-continue(5),
set-prec-transmit(6),
transmit(7),
set-mpls-exp-continue(8),
set-mpls-exp-transmit(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken by the traffic, when the traffic is exceeds the CIR.
There are the following actions:
Continue(1) -- Continue to be processed by the following
CAR policy which applied on the interface.
drop(2) -- Discard the packet.
set-dscp-continue(3) -- Remark the IP dscp of IP packet,
and then continue to be processed by
the following CAR policy.,
set-dscp-transmit(4) -- Remark the IP dscp of IP packet,
and then send the packet.
set-prec-continue(5) -- Remark the IP precedence of IP packet,
and then continue to be processed by
the following CAR policy.
set-prec-transmit(6) -- Remark the IP precedence of IP packet,
and then send the packet.
transmit(7) -- Send the packet directly.
set-mpls-exp-continue(8) -- Remark the mpls exp field of mpls packet,
and then continue to be processed by
the following CAR policy.
set-mpls-exp-transmit(9) -- Remark the mpls exp field of mpls packet,
and then send the packet.
"
::= { qtechIfQosCAREntry 11 }
qtechIfQosCARConformNewPrec OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rewrite the precedence value on packets when traffic is within the CIR."
::= { qtechIfQosCAREntry 12 }
qtechIfQosCARExceedNewPrec OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rewrite the precedence value on packets when traffic is out of CIR."
::= { qtechIfQosCAREntry 13 }
qtechIfQosCARConformPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which conformed CIR."
::= { qtechIfQosCAREntry 14 }
qtechIfQosCARConformByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes of packets which conformed CIR."
::= { qtechIfQosCAREntry 15 }
qtechIfQosCARExceedPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which exceeded CIR."
::= { qtechIfQosCAREntry 16 }
qtechIfQosCARExceedByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the bytes of packets which exceeded CIR."
::= { qtechIfQosCAREntry 17 }
-- qos gts / display qos gts interface 18
-- the GTS table
-- GTS(Generic Traffic Shaping) is the feature for shaping the traffic.
-- The GTS table contains configuration and running information of GTS policy
-- which applied on an interface.
qtechIfQosGTSTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechIfQosGTSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"GTS(Generic Traffic Shaping) table"
::= { qtechIfQoSMIBObjects 6 }
qtechIfQosGTSEntry OBJECT-TYPE
SYNTAX QtechIfQosGTSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"GTS configuration and running information"
INDEX { qtechIfQosGTSIfIndex, qtechIfQosGTSType, qtechIfQosGTSACLNum }
::= { qtechIfQosGTSTable 1 }
QtechIfQosGTSEntry ::=
SEQUENCE {
qtechIfQosGTSIfIndex
Integer32,
qtechIfQosGTSIfName
OCTET STRING,
qtechIfQosGTSType
INTEGER,
qtechIfQosGTSACLNum
Integer32,
qtechIfQosGTSCIR
Integer32,
qtechIfQosGTSBurstSize
Integer32,
qtechIfQosGTSExcessBurstSize
Integer32,
qtechIfQosGTSMaxQueLen
Integer32,
qtechIfQosGTSCurQueLen
Integer32,
qtechIfQosGTSPassPkt
Counter32,
qtechIfQosGTSPassByte
Counter32,
qtechIfQosGTSDiscardPkt
Counter32,
qtechIfQosGTSDiscardByte
Counter32
}
qtechIfQosGTSIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One of the index of the GTS table. This is the index of the interface on which GTS policy applied."
::= { qtechIfQosGTSEntry 1 }
qtechIfQosGTSIfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the interface on which GTS policy applied."
::= { qtechIfQosGTSEntry 2 }
qtechIfQosGTSType OBJECT-TYPE
SYNTAX INTEGER
{
acl(1),
all(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One of the index of the GTS table. This is the matching type for the traffic.
The value acl(1) means that the traffic matching the
configured ACL is applicable to the GTS policy.
The value all(2) means that all the traffic passing the interface
is applicable to the GTS policy."
::= { qtechIfQosGTSEntry 3 }
qtechIfQosGTSACLNum OBJECT-TYPE
SYNTAX Integer32 (0|2000..3999)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One of the index of the GTS table. This is the ACL number for the shaping traffic to match. "
::= { qtechIfQosGTSEntry 4 }
qtechIfQosGTSCIR OBJECT-TYPE
SYNTAX Integer32 (8000..155000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Committed Information Rate. This is the target sustained rate which the GTS policy will shape. Unit: bps."
::= { qtechIfQosGTSEntry 5 }
qtechIfQosGTSBurstSize OBJECT-TYPE
SYNTAX Integer32 (15000..155000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Burst traffic size. Unit: bit. This is the amount of traffic in excess of the committed information rate that will be permitted by the GTS policy."
::= { qtechIfQosGTSEntry 6 }
qtechIfQosGTSExcessBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..155000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Excess Burst Size. Unit: bit. This is the amount of traffic in excess of the burst size, which may be conditionally permitted by the GTS policy."
::= { qtechIfQosGTSEntry 7 }
qtechIfQosGTSMaxQueLen OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum queue length for the GTS buffer."
::= { qtechIfQosGTSEntry 8 }
qtechIfQosGTSCurQueLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current queue length for the GTS buffer, i.e. the
number of packets queuing in the GTS buffer."
::= { qtechIfQosGTSEntry 9 }
qtechIfQosGTSPassPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which passed by the GTS policy."
::= { qtechIfQosGTSEntry 10 }
qtechIfQosGTSPassByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes of packets which passed by the GTS policy."
::= { qtechIfQosGTSEntry 11 }
qtechIfQosGTSDiscardPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which discarded by the GTS policy."
::= { qtechIfQosGTSEntry 12 }
qtechIfQosGTSDiscardByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes of packets which discarded by the GTS policy."
::= { qtechIfQosGTSEntry 13 }
-- RTPQ statistics on the interface
qtechIfQosRTPIfQueueRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechIfQosRTPIfQueueRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running statistics for RTP(Realtime Transport Protocol) Queue applied on the interface."
::= { qtechIfQoSMIBObjects 7 }
qtechIfQosRTPIfQueueRunInfoEntry OBJECT-TYPE
SYNTAX QtechIfQosRTPIfQueueRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RTP(Realtime Transport Protocol) Queue statistics entry."
INDEX { qtechIfQosRTPIfApplyIfIndex }
::= { qtechIfQosRTPIfQueueRunInfoTable 1 }
QtechIfQosRTPIfQueueRunInfoEntry ::=
SEQUENCE {
qtechIfQosRTPIfApplyIfIndex
Integer32,
qtechIfQosRTPIfQueueSize
Counter32,
qtechIfQosRTPIfQueueMaxSize
Counter32,
qtechIfQosRTPIfQueueOutputs
Counter32,
qtechIfQosRTPIfQueueDiscards
Counter32
}
qtechIfQosRTPIfApplyIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the inteface index."
::= { qtechIfQosRTPIfQueueRunInfoEntry 1 }
qtechIfQosRTPIfQueueSize OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of Rtpq Queue."
::= { qtechIfQosRTPIfQueueRunInfoEntry 2 }
qtechIfQosRTPIfQueueMaxSize OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Max packet number of RTP(Realtime Transport Protocol) Queue."
::= { qtechIfQosRTPIfQueueRunInfoEntry 3 }
qtechIfQosRTPIfQueueOutputs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Output packet number of RTP(Realtime Transport Protocol) Queue."
::= { qtechIfQosRTPIfQueueRunInfoEntry 4 }
qtechIfQosRTPIfQueueDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded packet number of RTP(Realtime Transport Protocol) Queue."
::= { qtechIfQosRTPIfQueueRunInfoEntry 5 }
-- flow-limit statistics on the interface
qtechIfQosFlowLimitRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechIfQosFlowLimitRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Running statistics for Flow-Limit."
::= { qtechIfQoSMIBObjects 8 }
qtechIfQosFlowLimitRunInfoEntry OBJECT-TYPE
SYNTAX QtechIfQosFlowLimitRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Flow limit statistics entry."
INDEX { qtechIfQosFlowLimitLabelNum, qtechIfQosFlowLimitPktDirection }
::= { qtechIfQosFlowLimitRunInfoTable 1 }
QtechIfQosFlowLimitRunInfoEntry ::=
SEQUENCE {
qtechIfQosFlowLimitLabelNum
Integer32,
qtechIfQosFlowLimitPktDirection
INTEGER,
qtechIfQosFlowLimitCIR
Integer32,
qtechIfQosFlowLimitBurstSize
Integer32,
qtechIfQosFlowLimitExcessBurstSize
Integer32,
qtechIfQosFlowLimitConformAction
INTEGER,
qtechIfQosFlowLimitExceedAction
INTEGER,
qtechIfQosFlowLimitConformNewPrec
Integer32,
qtechIfQosFlowLimitExceedNewPrec
Integer32,
qtechIfQosFlowLimitConformPkt
Counter32,
qtechIfQosFlowLimitConformByte
Counter32,
qtechIfQosFlowLimitExceedPkt
Counter32,
qtechIfQosFlowLimitExceedByte
Counter32
}
qtechIfQosFlowLimitLabelNum OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the label number of flow limit."
::= { qtechIfQosFlowLimitRunInfoEntry 1 }
qtechIfQosFlowLimitPktDirection OBJECT-TYPE
SYNTAX INTEGER
{
input(1),
output(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One of the index of the flow limit table. This is the direction of traffic.
There are two directions: input(1) and output(2) "
::= { qtechIfQosFlowLimitRunInfoEntry 2 }
qtechIfQosFlowLimitCIR OBJECT-TYPE
SYNTAX Integer32 (8000..155000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Committed Information Rate. Unit: bps. This is the target rate which the flow limit policy limits. "
::= { qtechIfQosFlowLimitRunInfoEntry 3 }
qtechIfQosFlowLimitBurstSize OBJECT-TYPE
SYNTAX Integer32 (15000..155000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Burst traffic size. Unit: bit. This is the amount of traffic in excess of the committed information rate that will be permitted by the flow limit policy."
::= { qtechIfQosFlowLimitRunInfoEntry 4 }
qtechIfQosFlowLimitExcessBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..155000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Excess Burst Size. Unit: bit. This is the amount of traffic in excess of the burst size, which may be conditionally permitted by the flow limit policy."
::= { qtechIfQosFlowLimitRunInfoEntry 5 }
qtechIfQosFlowLimitConformAction OBJECT-TYPE
SYNTAX INTEGER
{
continue(1),
drop(2),
set-dscp-continue(3),
set-dscp-transmit(4),
set-prec-continue(5),
set-prec-transmit(6),
transmit(7),
set-mpls-exp-continue(8),
set-mpls-exp-transmit(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken by the traffic, when the traffic conforms CIR.
There are the following actions:
Continue(1) -- Continue to be processed by the following
CAR policy which applied on the interface.
drop(2) -- Discard the packet.
set-dscp-continue(3) -- Remark the IP dscp of IP packet,
and then continue to be processed by
the following CAR policy.,
set-dscp-transmit(4) -- Remark the IP dscp of IP packet,
and then send the packet.
set-prec-continue(5) -- Remark the IP precedence of IP packet,
and then continue to be processed by
the following CAR policy.
set-prec-transmit(6) -- Remark the IP precedence of IP packet,
and then send the packet.
transmit(7) -- Send the packet directly.
set-mpls-exp-continue(8) -- Remark the mpls exp field of mpls packet,
and then continue to be processed by
the following CAR policy.
set-mpls-exp-transmit(9) -- Remark the mpls exp field of mpls packet,
and then send the packet.
"
::= { qtechIfQosFlowLimitRunInfoEntry 6 }
qtechIfQosFlowLimitExceedAction OBJECT-TYPE
SYNTAX INTEGER
{
continue(1),
drop(2),
set-dscp-continue(3),
set-dscp-transmit(4),
set-prec-continue(5),
set-prec-transmit(6),
transmit(7),
set-mpls-exp-continue(8),
set-mpls-exp-transmit(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken by the traffic, when the traffic is exceeds the CIR.
There are the following actions:
Continue(1) -- Continue to be processed by the following
CAR policy which applied on the interface.
drop(2) -- Discard the packet.
set-dscp-continue(3) -- Remark the IP dscp of IP packet,
and then continue to be processed by
the following CAR policy.,
set-dscp-transmit(4) -- Remark the IP dscp of IP packet,
and then send the packet.
set-prec-continue(5) -- Remark the IP precedence of IP packet,
and then continue to be processed by
the following CAR policy.
set-prec-transmit(6) -- Remark the IP precedence of IP packet,
and then send the packet.
transmit(7) -- Send the packet directly.
set-mpls-exp-continue(8) -- Remark the mpls exp field of mpls packet,
and then continue to be processed by
the following CAR policy.
set-mpls-exp-transmit(9) -- Remark the mpls exp field of mpls packet,
and then send the packet.
"
::= { qtechIfQosFlowLimitRunInfoEntry 7 }
qtechIfQosFlowLimitConformNewPrec OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rewrite the precedence value on packets when traffic is within the CIR"
::= { qtechIfQosFlowLimitRunInfoEntry 8 }
qtechIfQosFlowLimitExceedNewPrec OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rewrite the precedence value on packets when traffic is out of CIR"
::= { qtechIfQosFlowLimitRunInfoEntry 9 }
qtechIfQosFlowLimitConformPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which conformed CIR."
::= { qtechIfQosFlowLimitRunInfoEntry 10 }
qtechIfQosFlowLimitConformByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes of packets which conformed CIR."
::= { qtechIfQosFlowLimitRunInfoEntry 11 }
qtechIfQosFlowLimitExceedPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which exceeded CIR."
::= { qtechIfQosFlowLimitRunInfoEntry 12 }
qtechIfQosFlowLimitExceedByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the bytes of packets which exceeded CIR."
::= { qtechIfQosFlowLimitRunInfoEntry 13 }
-- End of IF QoS MIB
-- start of hqos mib object, add by tangyoucan
qtechHQoSScalarObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 1 }
qtechHQoSUserQObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 2 }
qtechHQoSUserGroupQObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 3 }
qtechHQoSFlowQObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 4 }
qtechHQoSFlowMapObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 5 }
qtechHQoSTClassifierObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 6 }
qtechHQoSTBehaviorObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 7 }
qtechHQoSTPolicyObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 8 }
qtechHQoSVoQObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 9 }
qtechHQoSPortQObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 10 }
qtechHQoSIfAppObjects OBJECT IDENTIFIER ::= { qtechHQoSMIBObjects 11 }
-- ͨ<><CDA8><EFBFBD><EFBFBD><EFBFBD>Ʋ<EFBFBD>ѯ<EFBFBD>ڵ<EFBFBD><DAB5><EFBFBD><EFBFBD><EFBFBD>
qtechHQoSNameType OBJECT-TYPE
SYNTAX INTEGER {
unknownName(0),
userQNameIn(1),
userQNameOut(2),
userGroupQInName(3),
userGroupQOutName(4),
flowQName(5),
flowMapName(6),
trafficClassifierName(7),
trafficBehaviorName(8),
trafficPolicyName(9),
portQName(10)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name type of qtechHQoSNameFind, used to get index of correspond entry."
DEFVAL { unknownName }
::= { qtechHQoSScalarObjects 1 }
qtechHQoSNameFind OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of entry to find."
::= { qtechHQoSScalarObjects 2 }
qtechHQoSNameIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Corresponding entry index."
DEFVAL { 0 }
::= { qtechHQoSScalarObjects 3 }
-- Next free index in qtechHQoSUserQTable.
qtechHQoSUserQInIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSUserQIndex when creating entries in the
qtechHQoSUserQTable with in direction. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSUserQObjects 1 }
qtechHQoSUserQOutIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSUserQIndex when creating entries in the
qtechHQoSUserQTable with out direction. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSUserQObjects 2 }
qtechHQoSUserQTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSUserQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "User queue Table."
::= { qtechHQoSUserQObjects 3 }
qtechHQoSUserQEntry OBJECT-TYPE
SYNTAX QtechHQoSUserQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the user queue information."
INDEX { qtechHQoSUserQIndex }
::= { qtechHQoSUserQTable 1 }
QtechHQoSUserQEntry ::= SEQUENCE {
qtechHQoSUserQIndex Unsigned32,
qtechHQoSUserQName OCTET STRING,
qtechHQoSUserQDirection QtechQDirectionType,
qtechHQoSUserQRowStatus RowStatus,
qtechHQoSUserQFlowQName OCTET STRING,
qtechHQoSUserQFlowQIndex Unsigned32,
qtechHQoSUserQGroupName OCTET STRING,
qtechHQoSUserQGroupIndex Unsigned32,
qtechHQoSUserQFlowMapName OCTET STRING,
qtechHQoSUserQFlowMapIndex Unsigned32,
qtechHQoSUserQCIR Unsigned32,
qtechHQoSUserQPIR Unsigned32
}
qtechHQoSUserQIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User queue table index."
::= { qtechHQoSUserQEntry 1 }
qtechHQoSUserQName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User queue name."
::= { qtechHQoSUserQEntry 2 }
qtechHQoSUserQDirection OBJECT-TYPE
SYNTAX QtechQDirectionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Direction of the user queue.
There are two directions: inbound(1) and outbound(2)."
::= { qtechHQoSUserQEntry 3 }
qtechHQoSUserQRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state,
qtechHQoSUserQName, qtechHQoSUserQDirection
objects in this row can not be modified."
::= { qtechHQoSUserQEntry 4 }
qtechHQoSUserQFlowQName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of flow queue binding with this user queue."
::= { qtechHQoSUserQEntry 5 }
qtechHQoSUserQFlowQIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flow queue index binding with this user queue."
::= { qtechHQoSUserQEntry 6 }
qtechHQoSUserQGroupName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of user group queue binding with this user queue."
::= { qtechHQoSUserQEntry 7 }
qtechHQoSUserQGroupIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User group index binding with this user."
::= { qtechHQoSUserQEntry 8 }
qtechHQoSUserQFlowMapName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of flow-mapping binding with this user queue."
::= { qtechHQoSUserQEntry 9 }
qtechHQoSUserQFlowMapIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flow-mapping index binding with this user queue."
::= { qtechHQoSUserQEntry 10 }
qtechHQoSUserQCIR OBJECT-TYPE
SYNTAX Unsigned32 (0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Commit rate of this user queue."
DEFVAL { 0 }
::= { qtechHQoSUserQEntry 11 }
qtechHQoSUserQPIR OBJECT-TYPE
SYNTAX Unsigned32(1..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Peak rate of this user queue."
DEFVAL { 0 }
::= { qtechHQoSUserQEntry 12 }
-- end of user table
-- start of user group table
-- Next free index in qtechHQoSUserGroupQTable.
qtechHQoSUserGroupQInIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSUserGroupQIndex when creating entries in the
qtechHQoSUserGroupQTable with in direction. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSUserGroupQObjects 1 }
qtechHQoSUserGroupQOutIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSUserGroupQIndex when creating entries in the
qtechHQoSUserGroupQTable with out direction. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSUserGroupQObjects 2 }
qtechHQoSUserGroupQTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSUserGroupQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "User group queue table, a user-group contains a set of users."
::= { qtechHQoSUserGroupQObjects 3 }
qtechHQoSUserGroupQEntry OBJECT-TYPE
SYNTAX QtechHQoSUserGroupQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the user group queue information."
INDEX { qtechHQoSUserGroupQIndex }
::= { qtechHQoSUserGroupQTable 1 }
QtechHQoSUserGroupQEntry ::= SEQUENCE {
qtechHQoSUserGroupQIndex Unsigned32,
qtechHQoSUserGroupQName OCTET STRING,
qtechHQoSUserGroupQDirection QtechQDirectionType,
qtechHQoSUserGroupQRowStatus RowStatus,
qtechHQoSUserGroupQShaping Unsigned32
}
qtechHQoSUserGroupQIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User group table index."
::= { qtechHQoSUserGroupQEntry 1 }
qtechHQoSUserGroupQName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User group queue name."
::= { qtechHQoSUserGroupQEntry 2 }
qtechHQoSUserGroupQDirection OBJECT-TYPE
SYNTAX QtechQDirectionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Direction of user group queue.
There are two directions: inbound(1) and outbound(2)."
::= { qtechHQoSUserGroupQEntry 3 }
qtechHQoSUserGroupQRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state,
qtechHQoSUserGroupQName,qtechHQoSUserGroupQDirection
objects in this row can not be modified."
::= { qtechHQoSUserGroupQEntry 4 }
qtechHQoSUserGroupQShaping OBJECT-TYPE
SYNTAX Unsigned32 (0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User group queue total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSUserGroupQEntry 5 }
-- start of flow queue
-- Next free index in qtechHQoSFlowQTable.
qtechHQoSFlowQIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSFlowQIndex when creating entries in the
qtechHQoSFlowQTable. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSFlowQObjects 1 }
qtechHQoSFlowQTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSFlowQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flow queue table."
::= { qtechHQoSFlowQObjects 2 }
qtechHQoSFlowQEntry OBJECT-TYPE
SYNTAX QtechHQoSFlowQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the flow queue information."
INDEX { qtechHQoSFlowQIndex }
::= { qtechHQoSFlowQTable 1 }
QtechHQoSFlowQEntry ::= SEQUENCE {
qtechHQoSFlowQIndex Unsigned32,
qtechHQoSFlowQName OCTET STRING,
qtechHQoSFlowQRowStatus RowStatus,
qtechHQoSFlowQBEQType QtechQType,
qtechHQoSFlowQBEQWredWeight INTEGER,
qtechHQoSFlowQBEQWredName OCTET STRING,
qtechHQoSFlowQBEQDepth INTEGER,
qtechHQoSFlowQBEQShaping INTEGER,
qtechHQoSFlowQAF1QType QtechQType,
qtechHQoSFlowQAF1QWredWeight INTEGER,
qtechHQoSFlowQAF1QWredName OCTET STRING,
qtechHQoSFlowQAF1QDepth INTEGER,
qtechHQoSFlowQAF1QShaping INTEGER,
qtechHQoSFlowQAF2QType QtechQType,
qtechHQoSFlowQAF2QWredWeight INTEGER,
qtechHQoSFlowQAF2QWredName OCTET STRING,
qtechHQoSFlowQAF2QDepth INTEGER,
qtechHQoSFlowQAF2QShaping INTEGER,
qtechHQoSFlowQAF3QType QtechQType,
qtechHQoSFlowQAF3QWredWeight INTEGER,
qtechHQoSFlowQAF3QWredName OCTET STRING,
qtechHQoSFlowQAF3QDepth INTEGER,
qtechHQoSFlowQAF3QShaping INTEGER,
qtechHQoSFlowQAF4QType QtechQType,
qtechHQoSFlowQAF4QWredWeight INTEGER,
qtechHQoSFlowQAF4QWredName OCTET STRING,
qtechHQoSFlowQAF4QDepth INTEGER,
qtechHQoSFlowQAF4QShaping INTEGER,
qtechHQoSFlowQEFQType QtechQType,
qtechHQoSFlowQEFQWredWeight INTEGER,
qtechHQoSFlowQEFQWredName OCTET STRING,
qtechHQoSFlowQEFQDepth INTEGER,
qtechHQoSFlowQEFQShaping INTEGER,
qtechHQoSFlowQCS6QType QtechQType,
qtechHQoSFlowQCS6QWredWeight INTEGER,
qtechHQoSFlowQCS6QWredName OCTET STRING,
qtechHQoSFlowQCS6QDepth INTEGER,
qtechHQoSFlowQCS6QShaping INTEGER,
qtechHQoSFlowQCS7QType QtechQType,
qtechHQoSFlowQCS7QWredWeight INTEGER,
qtechHQoSFlowQCS7QWredName OCTET STRING,
qtechHQoSFlowQCS7QDepth INTEGER,
qtechHQoSFlowQCS7QShaping INTEGER
}
qtechHQoSFlowQIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of flow queue."
::= { qtechHQoSFlowQEntry 1 }
qtechHQoSFlowQName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue name."
::= { qtechHQoSFlowQEntry 2 }
qtechHQoSFlowQRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state,
qtechHQoSFlowQName
objects in this row can not be modified."
::= { qtechHQoSFlowQEntry 3 }
qtechHQoSFlowQBEQType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue BEQ type."
DEFVAL { q-wfq }
::= { qtechHQoSFlowQEntry 4 }
qtechHQoSFlowQBEQWredWeight OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue BE to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSFlowQEntry 5 }
qtechHQoSFlowQBEQWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue BE to wfq wred name."
::= { qtechHQoSFlowQEntry 6 }
qtechHQoSFlowQBEQDepth OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue BE to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSFlowQEntry 7 }
qtechHQoSFlowQBEQShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue BE total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSFlowQEntry 8 }
qtechHQoSFlowQAF1QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF1Q type."
DEFVAL { q-wfq }
::= { qtechHQoSFlowQEntry 9 }
qtechHQoSFlowQAF1QWredWeight OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF1 to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSFlowQEntry 10 }
qtechHQoSFlowQAF1QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF1 to wfq wred name."
::= { qtechHQoSFlowQEntry 11 }
qtechHQoSFlowQAF1QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF1 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSFlowQEntry 12 }
qtechHQoSFlowQAF1QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF1 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSFlowQEntry 13 }
qtechHQoSFlowQAF2QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF2 type."
DEFVAL { q-wfq}
::= { qtechHQoSFlowQEntry 14 }
qtechHQoSFlowQAF2QWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF2 to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSFlowQEntry 15 }
qtechHQoSFlowQAF2QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF2 to wfq wred name."
::= { qtechHQoSFlowQEntry 16 }
qtechHQoSFlowQAF2QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF2 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSFlowQEntry 17 }
qtechHQoSFlowQAF2QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF2 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSFlowQEntry 18 }
qtechHQoSFlowQAF3QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF3 type."
DEFVAL { q-wfq }
::= { qtechHQoSFlowQEntry 19 }
qtechHQoSFlowQAF3QWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF3 to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSFlowQEntry 20 }
qtechHQoSFlowQAF3QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF3 to wfq wred name."
::= { qtechHQoSFlowQEntry 21 }
qtechHQoSFlowQAF3QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF3 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSFlowQEntry 22 }
qtechHQoSFlowQAF3QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF3 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSFlowQEntry 23 }
qtechHQoSFlowQAF4QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF4 type."
DEFVAL { q-wfq }
::= { qtechHQoSFlowQEntry 24 }
qtechHQoSFlowQAF4QWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF4 to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSFlowQEntry 25 }
qtechHQoSFlowQAF4QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF4 to wfq wred name."
::= { qtechHQoSFlowQEntry 26 }
qtechHQoSFlowQAF4QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF4 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSFlowQEntry 27 }
qtechHQoSFlowQAF4QShaping OBJECT-TYPE
SYNTAX INTEGER(0..100000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue AF4 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSFlowQEntry 28 }
qtechHQoSFlowQEFQType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue EF type."
DEFVAL { q-pq }
::= { qtechHQoSFlowQEntry 29 }
qtechHQoSFlowQEFQWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue EF to wfq wred weight."
DEFVAL { 15 }
::= { qtechHQoSFlowQEntry 30 }
qtechHQoSFlowQEFQWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue EF to wfq wred name."
::= { qtechHQoSFlowQEntry 31 }
qtechHQoSFlowQEFQDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue EF to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSFlowQEntry 32 }
qtechHQoSFlowQEFQShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue EF total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSFlowQEntry 33 }
qtechHQoSFlowQCS6QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue CS6 type."
DEFVAL { q-pq }
::= { qtechHQoSFlowQEntry 34 }
qtechHQoSFlowQCS6QWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue CS6 to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSFlowQEntry 35 }
qtechHQoSFlowQCS6QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue CS6 to wfq wred name."
::= { qtechHQoSFlowQEntry 36 }
qtechHQoSFlowQCS6QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue CS6 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSFlowQEntry 37 }
qtechHQoSFlowQCS6QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue CS6 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSFlowQEntry 38 }
qtechHQoSFlowQCS7QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue CS7 type."
DEFVAL { q-pq }
::= { qtechHQoSFlowQEntry 39 }
qtechHQoSFlowQCS7QWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue CS7 to wfq wred weight."
DEFVAL { 15 }
::= { qtechHQoSFlowQEntry 40 }
qtechHQoSFlowQCS7QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue CS7 to wfq wred name."
::= { qtechHQoSFlowQEntry 41 }
qtechHQoSFlowQCS7QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue CS7 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSFlowQEntry 42 }
qtechHQoSFlowQCS7QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow queue CS7 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSFlowQEntry 43 }
-- end of flow queue
-- Next free index in qtechHQoSFlowMapTable.
qtechHQoSFlowMapIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSFlowMapIndex when creating entries in the
qtechHQoSFlowMapTable. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSFlowMapObjects 1 }
qtechHQoSFlowMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSFlowMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Flow map table."
::= { qtechHQoSFlowMapObjects 2 }
qtechHQoSFlowMapEntry OBJECT-TYPE
SYNTAX QtechHQoSFlowMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the flow map information."
INDEX { qtechHQoSFlowMapIndex }
::= { qtechHQoSFlowMapTable 1 }
QtechHQoSFlowMapEntry ::= SEQUENCE {
qtechHQoSFlowMapIndex Unsigned32,
qtechHQoSFlowMapName OCTET STRING,
qtechHQoSFlowMapRowStatus RowStatus,
qtechHQoSFlowMapBEQ2PortQ QtechCosType,
qtechHQoSFlowMapAF1Q2PortQ QtechCosType,
qtechHQoSFlowMapAF2Q2PortQ QtechCosType,
qtechHQoSFlowMapAF3Q2PortQ QtechCosType,
qtechHQoSFlowMapAF4Q2PortQ QtechCosType,
qtechHQoSFlowMapEFQ2PortQ QtechCosType,
qtechHQoSFlowMapCS6Q2PortQ QtechCosType,
qtechHQoSFlowMapCS7Q2PortQ QtechCosType
}
qtechHQoSFlowMapIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of flow map entry."
::= { qtechHQoSFlowMapEntry 1 }
qtechHQoSFlowMapName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Flow map entry name."
::= { qtechHQoSFlowMapEntry 2 }
qtechHQoSFlowMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state,
qtechHQoSFlowMapName
objects in this row can not be modified."
::= { qtechHQoSFlowMapEntry 3 }
qtechHQoSFlowMapBEQ2PortQ OBJECT-TYPE
SYNTAX QtechCosType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"BE to port queue type."
DEFVAL{cos-be}
::= { qtechHQoSFlowMapEntry 4 }
qtechHQoSFlowMapAF1Q2PortQ OBJECT-TYPE
SYNTAX QtechCosType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"AF1 to port queue type."
DEFVAL {cos-af1}
::= { qtechHQoSFlowMapEntry 5 }
qtechHQoSFlowMapAF2Q2PortQ OBJECT-TYPE
SYNTAX QtechCosType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"AF2 to port queue type."
DEFVAL {cos-af2}
::= { qtechHQoSFlowMapEntry 6 }
qtechHQoSFlowMapAF3Q2PortQ OBJECT-TYPE
SYNTAX QtechCosType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"AF3 to port queue type."
DEFVAL {cos-af3}
::= { qtechHQoSFlowMapEntry 7 }
qtechHQoSFlowMapAF4Q2PortQ OBJECT-TYPE
SYNTAX QtechCosType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"AF4 to port queue type."
DEFVAL {cos-af4}
::= { qtechHQoSFlowMapEntry 8 }
qtechHQoSFlowMapEFQ2PortQ OBJECT-TYPE
SYNTAX QtechCosType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"EF to port queue type."
DEFVAL {cos-ef}
::= { qtechHQoSFlowMapEntry 9 }
qtechHQoSFlowMapCS6Q2PortQ OBJECT-TYPE
SYNTAX QtechCosType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"CS6 to port queue type."
DEFVAL {cos-cs6}
::= { qtechHQoSFlowMapEntry 10 }
qtechHQoSFlowMapCS7Q2PortQ OBJECT-TYPE
SYNTAX QtechCosType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"CS7 to port queue type."
DEFVAL {cos-cs7}
::= { qtechHQoSFlowMapEntry 11 }
-- end of flow map entry
-- Next free index in qtechHQoSFlowMapTable.
qtechHQoSTClassifierIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSTClassifierIndex when creating entries in the
qtechHQoSTClassifierTable. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSTClassifierObjects 1 }
qtechHQoSTClassifierTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSTClassifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Traffic classfier table."
::= { qtechHQoSTClassifierObjects 2 }
qtechHQoSTClassifierEntry OBJECT-TYPE
SYNTAX QtechHQoSTClassifierEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the traffic classfier information."
INDEX { qtechHQoSTClassifierIndex, qtechHQoSTClassifierInstance}
::= { qtechHQoSTClassifierTable 1 }
QtechHQoSTClassifierEntry ::= SEQUENCE {
qtechHQoSTClassifierIndex Unsigned32,
qtechHQoSTClassifierInstance Unsigned32,
qtechHQoSTClassifierName OCTET STRING,
qtechHQoSTClassifierType INTEGER,
qtechHQoSTClassifierRowStatus RowStatus,
qtechHQoSTClassifierMatchMask BITS,
qtechHQoSTClassifierMatchV4Any TruthValue,
qtechHQoSTClassifierMatchV4AclID INTEGER,
qtechHQoSTClassifierV4AclName OCTET STRING,
qtechHQoSTClassifierMatchV4Dscp INTEGER,
qtechHQoSTClassifierMatchV4Tos INTEGER,
qtechHQoSTClassifierMatchV6Any TruthValue,
qtechHQoSTClassifierMatchV6AclID INTEGER,
qtechHQoSTClassifierV6AclName OCTET STRING,
qtechHQoSTClassifierMatchV6Dscp INTEGER,
qtechHQoSTClassifierMatchCos INTEGER,
qtechHQoSTClassifierMatchExp INTEGER,
qtechHQoSTClassifierMatchSrcMac MacAddress,
qtechHQoSTClassifierMatchDstMac MacAddress
}
qtechHQoSTClassifierIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of traffic classifier entry."
::= { qtechHQoSTClassifierEntry 1 }
qtechHQoSTClassifierInstance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Sub index of traffic classifier entry.
It is used for matching more conditions, such as acl, dscp."
::= { qtechHQoSTClassifierEntry 2 }
qtechHQoSTClassifierName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier name."
::= { qtechHQoSTClassifierEntry 3 }
qtechHQoSTClassifierType OBJECT-TYPE
SYNTAX INTEGER {
tc-or(1),
tc-and(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching type."
DEFVAL {tc-or}
::= { qtechHQoSTClassifierEntry 4 }
qtechHQoSTClassifierRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state,
qtechHQoSTClassifierName, qtechHQoSTClassifierType
objects in this row can not be modified."
::= { qtechHQoSTClassifierEntry 5 }
qtechHQoSTClassifierMatchMask OBJECT-TYPE
SYNTAX BITS {
tc-v4-any(0),
tc-v4-aclID(1),
tc-v4-aclName(2),
tc-v4-dscp(3),
tc-v4-tos(4),
tc-v6-any(5),
tc-v6-aclID(6),
tc-v6-aclName(7),
tc-v6-dscp(8),
tc-vlan-cos(9),
tc-exp(10),
tc-srcmac(11),
tc-dstmac(12)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This bit map indicates which of the fields described
next, If a particular bit is set to zero then
the corresponding field in the packet MUST be ignored
for comparison purposes."
::= { qtechHQoSTClassifierEntry 6 }
qtechHQoSTClassifierMatchV4Any OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching any ipv4 packet."
DEFVAL {false}
::= { qtechHQoSTClassifierEntry 7 }
qtechHQoSTClassifierMatchV4AclID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching acl id."
DEFVAL {0}
::= { qtechHQoSTClassifierEntry 8 }
qtechHQoSTClassifierV4AclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching acl name."
::= { qtechHQoSTClassifierEntry 9 }
qtechHQoSTClassifierMatchV4Dscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching ipv4 dscp."
DEFVAL {0}
::= { qtechHQoSTClassifierEntry 10 }
qtechHQoSTClassifierMatchV4Tos OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching ipv4 precedence."
DEFVAL {0}
::= { qtechHQoSTClassifierEntry 11 }
qtechHQoSTClassifierMatchV6Any OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching any ipv6 packet."
DEFVAL {false}
::= { qtechHQoSTClassifierEntry 12 }
qtechHQoSTClassifierMatchV6AclID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching ipv6 acl id."
::= { qtechHQoSTClassifierEntry 13 }
qtechHQoSTClassifierV6AclName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching ipv6 acl name."
::= { qtechHQoSTClassifierEntry 14 }
qtechHQoSTClassifierMatchV6Dscp OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching ipv6 dscp."
DEFVAL {0}
::= { qtechHQoSTClassifierEntry 15 }
qtechHQoSTClassifierMatchCos OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching Ethernet vlan cos."
DEFVAL {0}
::= { qtechHQoSTClassifierEntry 16 }
qtechHQoSTClassifierMatchExp OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching mpls label exp."
DEFVAL {0}
::= { qtechHQoSTClassifierEntry 17 }
qtechHQoSTClassifierMatchSrcMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching source mac."
::= { qtechHQoSTClassifierEntry 18 }
qtechHQoSTClassifierMatchDstMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier matching destination mac."
::= { qtechHQoSTClassifierEntry 19 }
-- end of tc entry
-- Next free index in qtechHQoSTBehaviorTable.
qtechHQoSTBehaviorIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSTBehaviorIndex when creating entries in the
qtechHQoSTBehaviorTable. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSTBehaviorObjects 1 }
qtechHQoSTBehaviorTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSTBehaviorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Traffic behavior table."
::= { qtechHQoSTBehaviorObjects 2 }
qtechHQoSTBehaviorEntry OBJECT-TYPE
SYNTAX QtechHQoSTBehaviorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the traffic behavior information."
INDEX { qtechHQoSTBehaviorIndex }
::= { qtechHQoSTBehaviorTable 1 }
QtechHQoSTBehaviorEntry ::= SEQUENCE {
qtechHQoSTBehaviorIndex Unsigned32,
qtechHQoSTBehaviorName OCTET STRING,
qtechHQoSTBehaviorRowStatus RowStatus,
qtechHQoSTBehaviorMask BITS,
qtechHQoSTBehaviorUserQName OCTET STRING,
qtechHQoSTBehaviorTCos QtechCosType,
qtechHQoSTBehaviorTColor INTEGER,
qtechHQoSTBehaviorRV4Dscp INTEGER,
qtechHQoSTBehaviorRV4Tos INTEGER,
qtechHQoSTBehaviorRV6Dscp INTEGER,
qtechHQoSTBehaviorRVlanCos INTEGER,
qtechHQoSTBehaviorRExp INTEGER,
qtechHQoSTBehaviorSubPolicyName OCTET STRING
}
qtechHQoSTBehaviorIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Traffic behavior table index."
::= { qtechHQoSTBehaviorEntry 1 }
qtechHQoSTBehaviorName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic behavior table name."
::= { qtechHQoSTBehaviorEntry 2 }
qtechHQoSTBehaviorRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state,
qtechHQoSTBehaviorName
objects in this row can not be modified."
::= { qtechHQoSTBehaviorEntry 3 }
qtechHQoSTBehaviorMask OBJECT-TYPE
SYNTAX BITS {
user-queue(0),
set-cos(1),
set-color(2),
remark-v4-dscp(3),
remark-v4-tos(4),
remark-v6-dscp(5),
remark-vlan-cos(6),
remark-exp(7),
sub-policy(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This bit map indicates which of the fields described
next, If a particular bit is set to zero then
the corresponding field in the packet MUST be ignored
for comparison purposes."
::= { qtechHQoSTBehaviorEntry 4 }
qtechHQoSTBehaviorUserQName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User queue belong to this traffic behavior."
::= { qtechHQoSTBehaviorEntry 5 }
qtechHQoSTBehaviorTCos OBJECT-TYPE
SYNTAX QtechCosType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set service-class."
DEFVAL {cos-be}
::= { qtechHQoSTBehaviorEntry 6 }
qtechHQoSTBehaviorTColor OBJECT-TYPE
SYNTAX INTEGER {
green(1),
yellow(2),
red(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set color."
DEFVAL {green}
::= { qtechHQoSTBehaviorEntry 7 }
qtechHQoSTBehaviorRV4Dscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remark traffic ipv4 dscp"
DEFVAL {0}
::= { qtechHQoSTBehaviorEntry 8 }
qtechHQoSTBehaviorRV4Tos OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remark traffic ipv4 precedence"
DEFVAL {0}
::= { qtechHQoSTBehaviorEntry 9 }
qtechHQoSTBehaviorRV6Dscp OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remark traffic ipv6 dscp."
DEFVAL {0}
::= { qtechHQoSTBehaviorEntry 10 }
qtechHQoSTBehaviorRVlanCos OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remark traffic ethernet vlan cos."
DEFVAL {0}
::= { qtechHQoSTBehaviorEntry 11 }
qtechHQoSTBehaviorRExp OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remark traffic mpls label exp."
DEFVAL {0}
::= { qtechHQoSTBehaviorEntry 12 }
qtechHQoSTBehaviorSubPolicyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Sub traffic policy under this traffic behavior."
::= { qtechHQoSTBehaviorEntry 13 }
--end of traffic behavior entry
-- Next free index in qtechHQoSTPolicyTable.
qtechHQoSTPolicyIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSTPolicyIndex when creating entries in the
qtechHQoSTPolicyTable. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSTPolicyObjects 1 }
qtechHQoSTPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSTPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Traffic policy table."
::= { qtechHQoSTPolicyObjects 2 }
qtechHQoSTPolicyEntry OBJECT-TYPE
SYNTAX QtechHQoSTPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the traffic policy information."
INDEX { qtechHQoSTPolicyIndex }
::= { qtechHQoSTPolicyTable 1 }
QtechHQoSTPolicyEntry ::= SEQUENCE {
qtechHQoSTPolicyIndex Unsigned32,
qtechHQoSTPolicyName OCTET STRING,
qtechHQoSTPolicyRowStatus RowStatus
}
qtechHQoSTPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Traffic policy entry index."
::= { qtechHQoSTPolicyEntry 1 }
qtechHQoSTPolicyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic policy entry name."
::= { qtechHQoSTPolicyEntry 2 }
qtechHQoSTPolicyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state,
qtechHQoSTPolicyName
objects in this row can not be modified."
::= { qtechHQoSTPolicyEntry 3 }
qtechHQoSTPolicyMapIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSTPolicyMapIndex when creating entries in the
qtechHQoSTPolicyMapTable. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSTPolicyObjects 3 }
qtechHQoSTPolicyMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSTPolicyMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Traffic policy map table. Contains policy,classfier,behavior."
::= { qtechHQoSTPolicyObjects 4 }
qtechHQoSTPolicyMapEntry OBJECT-TYPE
SYNTAX QtechHQoSTPolicyMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the traffic policy map information."
INDEX { qtechHQoSTPolicyMapIndex }
::= { qtechHQoSTPolicyMapTable 1 }
QtechHQoSTPolicyMapEntry ::= SEQUENCE {
qtechHQoSTPolicyMapIndex Unsigned32,
qtechHQoSTPolicyMapPolicyName OCTET STRING,
qtechHQoSTPolicyMapPolicyIndex Unsigned32,
qtechHQoSTPolicyMapTClassfierName OCTET STRING,
qtechHQoSTPolicyMapTClassfierIndex Unsigned32,
qtechHQoSTPolicyMapTBehaviorName OCTET STRING,
qtechHQoSTPolicyMapTBehaviorIndex Unsigned32,
qtechHQoSTPolicyMapPrecedence Unsigned32,
qtechHQoSTPolicyMapRowStatus RowStatus
}
qtechHQoSTPolicyMapIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Traffic policy map entry index."
::= { qtechHQoSTPolicyMapEntry 1 }
qtechHQoSTPolicyMapPolicyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic policy entry name."
::= { qtechHQoSTPolicyMapEntry 2 }
qtechHQoSTPolicyMapPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic policy entry index."
::= { qtechHQoSTPolicyMapEntry 3 }
qtechHQoSTPolicyMapTClassfierName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier entry name."
::= { qtechHQoSTPolicyMapEntry 4 }
qtechHQoSTPolicyMapTClassfierIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic classifier entry index."
::= { qtechHQoSTPolicyMapEntry 5 }
qtechHQoSTPolicyMapTBehaviorName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic behavior entry name."
::= { qtechHQoSTPolicyMapEntry 6 }
qtechHQoSTPolicyMapTBehaviorIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic behavior entry index."
::= { qtechHQoSTPolicyMapEntry 7 }
qtechHQoSTPolicyMapPrecedence OBJECT-TYPE
SYNTAX Unsigned32(1..200)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Precedence of traffic Policy. Set by user."
::= { qtechHQoSTPolicyMapEntry 8 }
qtechHQoSTPolicyMapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state,
qtechHQoSTPolicyMapPolicyName,qtechHQoSTPolicyMapTClassfierName
qtechHQoSTPolicyMapTBehaviorName
objects in this row can not be modified."
::= { qtechHQoSTPolicyMapEntry 9 }
-- end of policy entry
-- start of VoQ
qtechHQoSVoQEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config VoQ of device."
DEFVAL {false}
::= { qtechHQoSVoQObjects 1}
qtechHQoSVoQDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSVoQDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Device credite table."
::= { qtechHQoSVoQObjects 2 }
qtechHQoSVoQDeviceEntry OBJECT-TYPE
SYNTAX QtechHQoSVoQDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the device credite information."
INDEX { qtechHQoSVoQDeviceId }
::= { qtechHQoSVoQDeviceTable 1 }
QtechHQoSVoQDeviceEntry ::= SEQUENCE {
qtechHQoSVoQDeviceId Unsigned32,
qtechHQoSVoQDeviceCredit Unsigned32
}
qtechHQoSVoQDeviceId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Device ID, devid=slot*3+subslot."
::= { qtechHQoSVoQDeviceEntry 1 }
qtechHQoSVoQDeviceCredit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Mbit/s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Credite of this device."
::= { qtechHQoSVoQDeviceEntry 2 }
-- end of VoQ
-- Next free index in qtechHQoSFlowQTable.
qtechHQoSPortQIndexNext OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object contains an appropriate value to be used
for qtechHQoSPortQIndex when creating entries in the
qtechHQoSPortQTable. The value 0 indicates that no
unassigned entries are available."
::= { qtechHQoSPortQObjects 1 }
qtechHQoSPortQTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSPortQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port queue table."
::= { qtechHQoSPortQObjects 2 }
qtechHQoSPortQEntry OBJECT-TYPE
SYNTAX QtechHQoSPortQEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the port queue information."
INDEX { qtechHQoSPortQIndex }
::= { qtechHQoSPortQTable 1 }
QtechHQoSPortQEntry ::= SEQUENCE {
qtechHQoSPortQIndex Unsigned32,
qtechHQoSPortQName OCTET STRING,
qtechHQoSPortQRowStatus RowStatus,
qtechHQoSPortQBEQType QtechQType,
qtechHQoSPortQBEQWredWeight INTEGER,
qtechHQoSPortQBEQWredName OCTET STRING,
qtechHQoSPortQBEQDepth INTEGER,
qtechHQoSPortQBEQShaping INTEGER,
qtechHQoSPortQAF1QType QtechQType,
qtechHQoSPortQAF1QWredWeight INTEGER,
qtechHQoSPortQAF1QWredName OCTET STRING,
qtechHQoSPortQAF1QDepth INTEGER,
qtechHQoSPortQAF1QShaping INTEGER,
qtechHQoSPortQAF2QType QtechQType,
qtechHQoSPortQAF2QWredWeight INTEGER,
qtechHQoSPortQAF2QWredName OCTET STRING,
qtechHQoSPortQAF2QDepth INTEGER,
qtechHQoSPortQAF2QShaping INTEGER,
qtechHQoSPortQAF3QType QtechQType,
qtechHQoSPortQAF3QWredWeight INTEGER,
qtechHQoSPortQAF3QWredName OCTET STRING,
qtechHQoSPortQAF3QDepth INTEGER,
qtechHQoSPortQAF3QShaping INTEGER,
qtechHQoSPortQAF4QType QtechQType,
qtechHQoSPortQAF4QWredWeight INTEGER,
qtechHQoSPortQAF4QWredName OCTET STRING,
qtechHQoSPortQAF4QDepth INTEGER,
qtechHQoSPortQAF4QShaping INTEGER,
qtechHQoSPortQEFQType QtechQType,
qtechHQoSPortQEFQWredWeight INTEGER,
qtechHQoSPortQEFQWredName OCTET STRING,
qtechHQoSPortQEFQDepth INTEGER,
qtechHQoSPortQEFQShaping INTEGER,
qtechHQoSPortQCS6QType QtechQType,
qtechHQoSPortQCS6QWredWeight INTEGER,
qtechHQoSPortQCS6QWredName OCTET STRING,
qtechHQoSPortQCS6QDepth INTEGER,
qtechHQoSPortQCS6QShaping INTEGER,
qtechHQoSPortQCS7QType QtechQType,
qtechHQoSPortQCS7QWredWeight INTEGER,
qtechHQoSPortQCS7QWredName OCTET STRING,
qtechHQoSPortQCS7QDepth INTEGER,
qtechHQoSPortQCS7QShaping INTEGER
}
qtechHQoSPortQIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of port queue."
::= { qtechHQoSPortQEntry 1 }
qtechHQoSPortQName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue name."
::= { qtechHQoSPortQEntry 2 }
qtechHQoSPortQRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state,
qtechHQoSPortQName
objects in this row can not be modified."
::= { qtechHQoSPortQEntry 3 }
qtechHQoSPortQBEQType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue BEQ type."
DEFVAL { q-wfq }
::= { qtechHQoSPortQEntry 4 }
qtechHQoSPortQBEQWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue BEQ to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSPortQEntry 5 }
qtechHQoSPortQBEQWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue BEQ to wfq wred name."
::= { qtechHQoSPortQEntry 6 }
qtechHQoSPortQBEQDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue BEQ to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSPortQEntry 7 }
qtechHQoSPortQBEQShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue BEQ total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSPortQEntry 8 }
qtechHQoSPortQAF1QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF1 type."
DEFVAL { q-wfq }
::= { qtechHQoSPortQEntry 9 }
qtechHQoSPortQAF1QWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF1 to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSPortQEntry 10 }
qtechHQoSPortQAF1QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF1 to wfq wred name."
::= { qtechHQoSPortQEntry 11 }
qtechHQoSPortQAF1QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF1 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSPortQEntry 12 }
qtechHQoSPortQAF1QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF1 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSPortQEntry 13 }
qtechHQoSPortQAF2QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF2 type."
DEFVAL { q-wfq }
::= { qtechHQoSPortQEntry 14 }
qtechHQoSPortQAF2QWredWeight OBJECT-TYPE
SYNTAX INTEGER(1..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF2 to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSPortQEntry 15 }
qtechHQoSPortQAF2QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF2 to wfq wred name."
::= { qtechHQoSPortQEntry 16 }
qtechHQoSPortQAF2QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF2 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSPortQEntry 17 }
qtechHQoSPortQAF2QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF2 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSPortQEntry 18 }
qtechHQoSPortQAF3QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF3 type."
DEFVAL { q-wfq }
::= { qtechHQoSPortQEntry 19 }
qtechHQoSPortQAF3QWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF3 to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSPortQEntry 20 }
qtechHQoSPortQAF3QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF3 to wfq wred name."
::= { qtechHQoSPortQEntry 21 }
qtechHQoSPortQAF3QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue BEQ to wfq depth."
DEFVAL {200 }
::= { qtechHQoSPortQEntry 22 }
qtechHQoSPortQAF3QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF3 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSPortQEntry 23 }
qtechHQoSPortQAF4QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF4 type."
DEFVAL { q-wfq }
::= { qtechHQoSPortQEntry 24 }
qtechHQoSPortQAF4QWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF4 to wfq wred weight."
DEFVAL { 10 }
::= { qtechHQoSPortQEntry 25 }
qtechHQoSPortQAF4QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF4 to wfq wred name."
::= { qtechHQoSPortQEntry 26 }
qtechHQoSPortQAF4QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF4 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSPortQEntry 27 }
qtechHQoSPortQAF4QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue AF4 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSPortQEntry 28 }
qtechHQoSPortQEFQType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue EF type."
DEFVAL { q-pq }
::= { qtechHQoSPortQEntry 29 }
qtechHQoSPortQEFQWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue EF to wfq wred weight."
DEFVAL { 15 }
::= { qtechHQoSPortQEntry 30 }
qtechHQoSPortQEFQWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue EF to wfq wred name."
::= { qtechHQoSPortQEntry 31 }
qtechHQoSPortQEFQDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue EF to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSPortQEntry 32 }
qtechHQoSPortQEFQShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue EF total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSPortQEntry 33 }
qtechHQoSPortQCS6QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue CS6 type."
DEFVAL { q-pq }
::= { qtechHQoSPortQEntry 34 }
qtechHQoSPortQCS6QWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue CS6 to wfq wred weight."
DEFVAL { 15 }
::= { qtechHQoSPortQEntry 35 }
qtechHQoSPortQCS6QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue CS6 to wfq wred name."
::= { qtechHQoSPortQEntry 36 }
qtechHQoSPortQCS6QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue CS6 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSPortQEntry 37 }
qtechHQoSPortQCS6QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue CS6 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSPortQEntry 38 }
qtechHQoSPortQCS7QType OBJECT-TYPE
SYNTAX QtechQType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue CS7 type."
DEFVAL { q-pq }
::= { qtechHQoSPortQEntry 39 }
qtechHQoSPortQCS7QWredWeight OBJECT-TYPE
SYNTAX INTEGER(8..2048)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue CS7 to wfq wred weight."
DEFVAL { 15 }
::= { qtechHQoSPortQEntry 40 }
qtechHQoSPortQCS7QWredName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue CS7 to wfq wred name."
::= { qtechHQoSPortQEntry 41 }
qtechHQoSPortQCS7QDepth OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue CS7 to wfq depth."
DEFVAL { 200 }
::= { qtechHQoSPortQEntry 42 }
qtechHQoSPortQCS7QShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Port queue CS7 total bandwidth."
DEFVAL { 10000000 }
::= { qtechHQoSPortQEntry 43 }
-- end of port queue
-- start of HQoS interface application object
qtechHQoSIfAppTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechHQoSIfAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The HQoS config with this table."
::= { qtechHQoSIfAppObjects 1 }
qtechHQoSIfAppEntry OBJECT-TYPE
SYNTAX QtechHQoSIfAppEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents the interface HQoS config information."
INDEX { qtechHQoSIfAppIndex }
::= { qtechHQoSIfAppTable 1 }
QtechHQoSIfAppEntry ::= SEQUENCE {
qtechHQoSIfAppIndex InterfaceIndex,
qtechHQoSIfAppInPolicyName OCTET STRING,
qtechHQoSIfAppInPolicyIndex Unsigned32,
qtechHQoSIfAppInPolicyLayer QtechLayerType,
qtechHQoSIfAppOutPolicyName OCTET STRING,
qtechHQoSIfAppOutPolicyIndex Unsigned32,
qtechHQoSIfAppOutPolicyLayer QtechLayerType,
qtechHQoSIfAppPortQueueName OCTET STRING,
qtechHQoSIfAppPortQueueIndex Unsigned32,
qtechHQoSIfAppPortQueueShaping INTEGER
}
qtechHQoSIfAppIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index ."
::= { qtechHQoSIfAppEntry 1 }
qtechHQoSIfAppInPolicyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inbound policy name with this interface."
::= { qtechHQoSIfAppEntry 2 }
qtechHQoSIfAppInPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inbound policy index with this interface."
::= { qtechHQoSIfAppEntry 3 }
qtechHQoSIfAppInPolicyLayer OBJECT-TYPE
SYNTAX QtechLayerType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Inbound policy layer with this interface."
DEFVAL {all-layer}
::= { qtechHQoSIfAppEntry 4 }
qtechHQoSIfAppOutPolicyName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Outbound policy name with this interface."
::= { qtechHQoSIfAppEntry 5 }
qtechHQoSIfAppOutPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound policy index with this interface."
::= { qtechHQoSIfAppEntry 6 }
qtechHQoSIfAppOutPolicyLayer OBJECT-TYPE
SYNTAX QtechLayerType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Outbound policy layer with this interface."
DEFVAL {all-layer}
::= { qtechHQoSIfAppEntry 7 }
qtechHQoSIfAppPortQueueName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port queue name with this interface."
::= { qtechHQoSIfAppEntry 8 }
qtechHQoSIfAppPortQueueIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port queue index with this interface."
::= { qtechHQoSIfAppEntry 9 }
qtechHQoSIfAppPortQueueShaping OBJECT-TYPE
SYNTAX INTEGER(0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port queue total bandwidth with this interface."
DEFVAL {10000000}
::= { qtechHQoSIfAppEntry 10 }
-- end of HQoS interface appliction table
END
-- End module
View Git Blame Copy Permalink