WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/qtech/QTECH-AC-MGMT-MIB

3869 lines
114 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- QTECH-AC-MGMT-MIB.mib : Qtech AC MGMT MIB file
-- January 2009, huangyuanbo
--
-- Copyright (c) 2009 by Qtech Networks Co.,Ltd.
-- All rights reserved.
-- *******************************************************************
--
QTECH-AC-MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress,
OBJECT-TYPE,
MODULE-IDENTITY,
NOTIFICATION-TYPE,
TimeTicks,
Counter32
FROM SNMPv2-SMI
MacAddress,
TruthValue,
DisplayString,
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
InetAddress,
InetAddressType
FROM INET-ADDRESS-MIB
capwapBaseNtfChannelType
FROM CAPWAP-BASE-MIB
capwapBaseNtfAuthenMethod
FROM CAPWAP-BASE-MIB
capwapBaseNtfChannelDownReason
FROM CAPWAP-BASE-MIB
qtechMgmt
FROM QTECH-SMI;
qtechAcMgmtMIB MODULE-IDENTITY
LAST-UPDATED "200909180000Z"
ORGANIZATION "Qtech Networks Co.,Ltd."
CONTACT-INFO
"
Tel: 4008-111-000
E-mail: service@qtech.com.cn"
DESCRIPTION
"This module defines ac management mibs."
REVISION "200909180000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { qtechMgmt 56}
--***************** define the AC root nodes *****************
qtechAcMgmtAcMIBObjects OBJECT IDENTIFIER ::= { qtechAcMgmtMIB 1 }
qtechAcMgmtAc OBJECT IDENTIFIER ::= { qtechAcMgmtAcMIBObjects 1 }
qtechAcMgmtAcIf OBJECT IDENTIFIER ::= { qtechAcMgmtAcMIBObjects 2 }
--***************** define the AP root nodes *****************
qtechAcMgmtApMIBObjects OBJECT IDENTIFIER ::= { qtechAcMgmtMIB 2 }
qtechAcMgmtAp OBJECT IDENTIFIER ::= { qtechAcMgmtApMIBObjects 1 }
qtechAcMgmtApIf OBJECT IDENTIFIER ::= { qtechAcMgmtApMIBObjects 2 }
--******** define the AP group root nodes ************
qtechAcMgmtApgMIBObjects OBJECT IDENTIFIER ::= { qtechAcMgmtMIB 3 }
qtechAcMgmtApg OBJECT IDENTIFIER ::= { qtechAcMgmtApgMIBObjects 1 }
qtechAcMgmtApgIf OBJECT IDENTIFIER ::= { qtechAcMgmtApgMIBObjects 2 }
--******** define the Wlan root nodes ************
qtechAcMgmtWlanMIBObjects OBJECT IDENTIFIER ::= { qtechAcMgmtMIB 4 }
qtechAcMgmtWlan OBJECT IDENTIFIER ::= { qtechAcMgmtWlanMIBObjects 1 }
qtechAcMgmtWlanIf OBJECT IDENTIFIER ::= { qtechAcMgmtWlanMIBObjects 2 }
--******** define the Sta root nodes ************
qtechAcMgmtStaMIBObjects OBJECT IDENTIFIER ::= { qtechAcMgmtMIB 5 }
qtechAcMgmtSta OBJECT IDENTIFIER ::= { qtechAcMgmtStaMIBObjects 1 }
qtechAcMgmtStaIf OBJECT IDENTIFIER ::= { qtechAcMgmtStaMIBObjects 2 }
-- ******** define the notify nodes *************
qtechAcMgmtNotificationsMIBObjects OBJECT IDENTIFIER ::= { qtechAcMgmtMIB 6 }
qtechAcMgmtNtfObjects OBJECT IDENTIFIER ::= { qtechAcMgmtNotificationsMIBObjects 1 }
qtechAcMgmtNotifications OBJECT IDENTIFIER ::= { qtechAcMgmtNotificationsMIBObjects 2 }
--********************************************************************
-- **
-- AC nodes **
-- **
--********************************************************************
-- 1.sta_limit, the station num ac support
qtechAcStaLimit OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max station this AC supports."
::= { qtechAcMgmtAc 1 }
-- 2.wtp_limit, the wtp num ac support
qtechAcWtpLimit OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max wtp this AC supports."
::= { qtechAcMgmtAc 2 }
-- 3.[no] r_mac_field, 0-disable,1-enable
qtechAcRMacField OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set AC's R-MAC Field."
::= { qtechAcMgmtAc 3 }
-- 4.[no] data_dtls, 0-disable,1-enable
qtechAcDataDtls OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set AC's DTLS Policy Field."
::= { qtechAcMgmtAc 4 }
-- 5.[no] ecn_support, 0-disable,1-enable
qtechAcEcnSupport OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set AC's ECN Support Field."
::= { qtechAcMgmtAc 5 }
-- 6.[no] backup_ac_ip ip_address
qtechAcAcIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechAcAcIpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Add or Del the AC's backup ip address."
::= { qtechAcMgmtAc 6 }
qtechAcAcIpTableEntry OBJECT-TYPE
SYNTAX QtechAcAcIpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of Ac's backup ip address."
INDEX { qtechAcAcIpIndex}
::= { qtechAcAcIpTable 1 }
QtechAcAcIpTableEntry ::=
SEQUENCE {
qtechAcAcIpIndex INTEGER,
qtechAcBackAcIp IpAddress,
qtechAcAcIpRS RowStatus
}
-- The Ac name with priority index
qtechAcAcIpIndex OBJECT-TYPE
SYNTAX INTEGER (1..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AC's Ac name with priority index."
::= { qtechAcAcIpTableEntry 1 }
qtechAcBackAcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set AC's ip list."
::= { qtechAcAcIpTableEntry 2 }
qtechAcAcIpRS OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to add or del a backup ac ip address in the ac."
::= { qtechAcAcIpTableEntry 3 }
-- 7.[no] ecn_support, set the mtu
qtechAcMtu OBJECT-TYPE
SYNTAX INTEGER (0..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set AC's MTU."
::= { qtechAcMgmtAc 7 }
-- 8.ac_name, set the ac name
qtechAcAcName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set AC's Name."
::= { qtechAcMgmtAc 8 }
-- location location_string
qtechAcLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ac's location information."
::= { qtechAcMgmtAc 9}
-- reset ap_name
qtechAcResetAp OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete the ap by assigning the ap name."
::= { qtechAcMgmtAc 10}
-- The ap num attached to this ac.
qtechAcApNum OBJECT-TYPE
SYNTAX INTEGER (1..800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ap num attached to this ac."
::= { qtechAcMgmtAc 11 }
-- The Ac's 802.11a rate set
qtechAc80211aRateTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechAc80211aRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ap attributes."
::= { qtechAcMgmtAc 12 }
qtechAc80211aRateEntry OBJECT-TYPE
SYNTAX QtechAc80211aRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get and set the Ap attribtues."
INDEX { qtechAc80211aRate }
::= { qtechAc80211aRateTable 1 }
QtechAc80211aRateEntry ::=
SEQUENCE {
qtechAc80211aRate INTEGER,
qtechAc80211aRateType INTEGER
}
qtechAc80211aRate OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The global 802.11a rate set in this AC.
802.11a-6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
set 1 for 6Mbps, set 2 for 9Mbps, set 3 for 12Mbps,etc..."
::= { qtechAc80211aRateEntry 1}
qtechAc80211aRateType OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate type:
1--disable
2--mandatory
3--support"
::= { qtechAc80211aRateEntry 2}
-- The Ac's 802.11b rate set
qtechAc80211bRateTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechAc80211bRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 802.11b rate attributes."
::= { qtechAcMgmtAc 13 }
qtechAc80211bRateEntry OBJECT-TYPE
SYNTAX QtechAc80211bRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get and set the Ap attribtues."
INDEX { qtechAc80211bRate }
::= { qtechAc80211bRateTable 1 }
QtechAc80211bRateEntry ::=
SEQUENCE {
qtechAc80211bRate INTEGER,
qtechAc80211bRateType INTEGER
}
qtechAc80211bRate OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The global 802.11b rate set in this AC.
802.11b-1, 2, 5.5, 11Mbps.
set 1 for 1Mbps, set 2 for 2Mbps, set 3 for 5.5Mbps,etc..."
::= { qtechAc80211bRateEntry 1}
qtechAc80211bRateType OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate type:
1--disable
2--mandatory
3--support"
::= { qtechAc80211bRateEntry 2}
qtechAcFallback OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fallback state:
1--enable, 2--disable"
::= { qtechAcMgmtAc 14}
qtechAcStaNum OBJECT-TYPE
SYNTAX INTEGER (1..24000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client num in this AC."
::= { qtechAcMgmtAc 15}
qtechAcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AC's mac address."
::= { qtechAcMgmtAc 16}
qtechAcDescriptor OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AC's descriptor."
::= { qtechAcMgmtAc 17}
qtechAcPID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AC's product id."
::= { qtechAcMgmtAc 18}
qtechAcHwId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AC's Hardware Id."
::= { qtechAcMgmtAc 19}
qtechAcSN OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AC's serial number."
::= { qtechAcMgmtAc 20}
qtechAcTemp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AC's temperature."
::= { qtechAcMgmtAc 21}
qtechAcAPUpDownCtrl OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP Up/Down trap control
0 - off
1 - on."
::= { qtechAcMgmtAc 22}
qtechAcAPJoinFailCtrl OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP join fail control
0 - off
1 - on."
::= { qtechAcMgmtAc 23}
qtechAcAPDecryEroReportCtrl OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP Decry Error Report control
0 - off
1 - on."
::= { qtechAcMgmtAc 24}
qtechAcApImageUpdtCtrl OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP Image Update Control
0 - off
1 - on."
::= { qtechAcMgmtAc 25}
qtechAcApConfigMsgEroCtrl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP Config Message Error
0 - off
1 - on."
::= { qtechAcMgmtAc 26}
qtechAcApRadioOperStatuCtrl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP Radio Oper Status
0 - off
1 - on."
::= { qtechAcMgmtAc 27}
qtechAcApAuthenFailCtrl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP Authen Fail trap control
0 - off
1 - on."
::= { qtechAcMgmtAc 28}
qtechAcApTimestampCtrl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP timestamp trap control
0 - off
1 - on."
::= { qtechAcMgmtAc 29}
qtechAcStaOperCtrl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Sta operation trap control
0 - off
1 - on."
::= { qtechAcMgmtAc 30}
qtechAcType OBJECT-TYPE
SYNTAX INTEGER {
ws5302(1),
ws5708(2),
m8600ws(3),
ws3302(4),
m12000ws(5),
ws5504(6),
ws6108(7),
ws6816(8),
m18000-WS-ED(9),
m8600E-WS-ED(10),
eg2000(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ac type."
::= { qtechAcMgmtAc 31}
qtechAcNeid OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ac system net id."
::= { qtechAcMgmtAc 32}
qtechAcManufacturer OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ac's Manufacturer."
::= { qtechAcMgmtAc 33}
qtechAcSwVer OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ac's software version."
::= { qtechAcMgmtAc 34}
qtechAcSwManufacturer OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ac's software Manufacturer."
::= { qtechAcMgmtAc 35}
qtechAcStaResourceNotEnough OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sta number which can not attach to
this system for not enough resource."
::= { qtechAcMgmtAc 36}
qtechAcPppoeClientAct OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active client number in this AC."
::= { qtechAcMgmtAc 37}
qtechAcPppoeClientMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The client number which this AC support."
::= { qtechAcMgmtAc 38}
qtechAcStaActThredhold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The thredhold which the client attach to this AC in one hour."
::= { qtechAcMgmtAc 39}
qtechAcStaDisactThredhold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The thredhold which the client leave this AC in one hour."
::= { qtechAcMgmtAc 40}
qtechAcStaTotalRoamThredhold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The thredhold which the client's total roaming times."
::= { qtechAcMgmtAc 41}
qtechAcStaPerRoamThredhold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The thredhold which the client's roaming times per minite."
::= { qtechAcMgmtAc 42}
-- [no] sta-off-line-remain-time number
qtechAcStaOffLineRemainTime OBJECT-TYPE
SYNTAX INTEGER(0..365)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object presents the time which the off line STA statistic remain in the AC."
::= { qtechAcMgmtAc 43}
-- [no] sta-off-line-number number
qtechAcStaOffLineNumber OBJECT-TYPE
SYNTAX INTEGER(0..5000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object presents the max number of the off line STA number statistic."
::= { qtechAcMgmtAc 44}
-- sta-off-line-del mac-addr
qtechAcStaOffLineDelSingle OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object presents the mac address which the off line STA to remove its statistic."
::= { qtechAcMgmtAc 45}
-- sta-off-line-del all
qtechAcStaOffLineDelAll OBJECT-TYPE
SYNTAX INTEGER(1..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is set to clear all of the off line STA's statistic."
::= { qtechAcMgmtAc 46}
-- no ap-config ap-name
qtechAcRmOffLineApConfig OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..65))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is set to delete the off line AP's configuration."
::= { qtechAcMgmtAc 47}
qtechAcFlowBlGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechAcFlowBlGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The flow balance group table"
::= { qtechAcMgmtAc 48 }
qtechAcFlowBlGroupEntry OBJECT-TYPE
SYNTAX QtechAcFlowBlGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get and set the flow balance group attribute."
INDEX { qtechAcFlowBlGroupName }
::= { qtechAcFlowBlGroupTable 1 }
QtechAcFlowBlGroupEntry ::=
SEQUENCE {
qtechAcFlowBlGroupName DisplayString,
qtechAcFlowBlApName1 DisplayString,
qtechAcFlowBlApName2 DisplayString,
qtechAcFlowBlApName3 DisplayString,
qtechAcFlowBlApName4 DisplayString,
qtechAcFlowBlApName5 DisplayString,
qtechAcFlowBlApName6 DisplayString,
qtechAcFlowBlApName7 DisplayString,
qtechAcFlowBlApName8 DisplayString,
qtechAcFlowBlApName9 DisplayString,
qtechAcFlowBlApName10 DisplayString,
qtechAcFlowBlNum INTEGER,
qtechAcFlowBlRS RowStatus,
qtechAcFlowBlEnable INTEGER,
qtechAcFlowBlBase INTEGER,
qtechAcFlowBlIsEnable TruthValue
}
qtechAcFlowBlGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flow balance group's name."
::= { qtechAcFlowBlGroupEntry 1}
qtechAcFlowBlApName1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this flow balance group."
::= { qtechAcFlowBlGroupEntry 2}
qtechAcFlowBlApName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this flow balance group."
::= { qtechAcFlowBlGroupEntry 3}
qtechAcFlowBlApName3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this flow balance group."
::= { qtechAcFlowBlGroupEntry 4}
qtechAcFlowBlApName4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this flow balance group."
::= { qtechAcFlowBlGroupEntry 5}
qtechAcFlowBlApName5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this flow balance group."
::= { qtechAcFlowBlGroupEntry 6}
qtechAcFlowBlApName6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this flow balance group."
::= { qtechAcFlowBlGroupEntry 7}
qtechAcFlowBlApName7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this flow balance group."
::= { qtechAcFlowBlGroupEntry 8}
qtechAcFlowBlApName8 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this flow balance group."
::= { qtechAcFlowBlGroupEntry 9}
qtechAcFlowBlApName9 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this flow balance group."
::= { qtechAcFlowBlGroupEntry 10}
qtechAcFlowBlApName10 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this flow balance group."
::= { qtechAcFlowBlGroupEntry 11}
qtechAcFlowBlNum OBJECT-TYPE
SYNTAX INTEGER(0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flow balance group's flow throshold."
::= { qtechAcFlowBlGroupEntry 12}
qtechAcFlowBlRS OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to add or del or modify the flow balance table."
::= { qtechAcFlowBlGroupEntry 13 }
qtechAcFlowBlEnable OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flow balance group's flow enable throshold."
::= { qtechAcFlowBlGroupEntry 14 }
qtechAcFlowBlBase OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flow balance group's flow base."
::= { qtechAcFlowBlGroupEntry 15 }
qtechAcFlowBlIsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flow balance group's enable/disable."
::= { qtechAcFlowBlGroupEntry 16}
qtechAcNumBlGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechAcNumBlGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The number balance group table"
::= { qtechAcMgmtAc 49 }
qtechAcNumBlGroupEntry OBJECT-TYPE
SYNTAX QtechAcNumBlGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get and set the number balance group attribute."
INDEX { qtechAcNumBlGroupName }
::= { qtechAcNumBlGroupTable 1 }
QtechAcNumBlGroupEntry ::=
SEQUENCE {
qtechAcNumBlGroupName DisplayString,
qtechAcNumBlApName1 DisplayString,
qtechAcNumBlApName2 DisplayString,
qtechAcNumBlApName3 DisplayString,
qtechAcNumBlApName4 DisplayString,
qtechAcNumBlApName5 DisplayString,
qtechAcNumBlApName6 DisplayString,
qtechAcNumBlApName7 DisplayString,
qtechAcNumBlApName8 DisplayString,
qtechAcNumBlApName9 DisplayString,
qtechAcNumBlApName10 DisplayString,
qtechAcNumBlNum INTEGER,
qtechAcNumBlRS RowStatus,
qtechAcNumBlEnable INTEGER,
qtechAcNumBlIsEnable TruthValue
}
qtechAcNumBlGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number balance group's name."
::= { qtechAcNumBlGroupEntry 1}
qtechAcNumBlApName1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this number balance group."
::= { qtechAcNumBlGroupEntry 2}
qtechAcNumBlApName2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this number balance group."
::= { qtechAcNumBlGroupEntry 3}
qtechAcNumBlApName3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this number balance group."
::= { qtechAcNumBlGroupEntry 4}
qtechAcNumBlApName4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this number balance group."
::= { qtechAcNumBlGroupEntry 5}
qtechAcNumBlApName5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this number balance group."
::= { qtechAcNumBlGroupEntry 6}
qtechAcNumBlApName6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this number balance group."
::= { qtechAcNumBlGroupEntry 7}
qtechAcNumBlApName7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this number balance group."
::= { qtechAcNumBlGroupEntry 8}
qtechAcNumBlApName8 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this number balance group."
::= { qtechAcNumBlGroupEntry 9}
qtechAcNumBlApName9 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this number balance group."
::= { qtechAcNumBlGroupEntry 10}
qtechAcNumBlApName10 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP name belong to this number balance group."
::= { qtechAcNumBlGroupEntry 11}
qtechAcNumBlNum OBJECT-TYPE
SYNTAX INTEGER(0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number balance group's number throshold."
::= { qtechAcNumBlGroupEntry 12}
qtechAcNumBlRS OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to add or del or modify the number balance table."
::= { qtechAcNumBlGroupEntry 13 }
qtechAcNumBlEnable OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number balance group's number enable throshold."
::= { qtechAcNumBlGroupEntry 14}
qtechAcNumBlIsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number balance group's enable/disable."
::= { qtechAcNumBlGroupEntry 15}
qtechAcInAcRoamNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta roaming in this AC."
::= { qtechAcMgmtAc 50}
qtechAcBetweenAcRoamInNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta roaming in timers while roaming between ACs."
::= { qtechAcMgmtAc 51}
qtechAcStaOnOverThrodOperCtrl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Sta on times over thredhold trap control
0 - off
1 - on."
::= { qtechAcMgmtAc 52}
qtechAcStaOffOverThrodOperCtrl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Sta off times over thredhold trap control
0 - off
1 - on."
::= { qtechAcMgmtAc 53}
qtechAcBetweenAcRoamOutNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta roaming out timers while roaming between ACs."
::= { qtechAcMgmtAc 54}
qtechAcCpusageSwitch OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object presents the qtechApCpuUsageTrapTimer node active or not.
1 -- on
2 -- off"
::= { qtechAcMgmtAc 55 }
qtechAcCpuUsageTrapTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the AP's cpu usage info trap timer,
second. Set to all APs."
::= { qtechAcMgmtAc 56 }
qtechAcStatTrapTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object present the AP's radio statistic
trap timer, second. Set to all APs."
::= { qtechAcMgmtAc 57}
qtechAcHeartBeat OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The heart beat between AC and AP<41><50>should not greater than 75s<35><73>second.
Set 0 to turn off this function."
::= { qtechAcMgmtAc 58}
qtechAcTotalApSupNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object present the ACs' max num of supported APs."
::= { qtechAcMgmtAc 59}
qtechAcTotalStaSupNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object present the ACs' max num of supported STAs."
::= { qtechAcMgmtAc 60}
qtechAcTotalPppoeSupNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object present the ACs' maximum number of pppoe authentication."
::= { qtechAcMgmtAc 61}
qtechAcCurTotalApSupNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object present the current ACs' max num of supported STAs."
::= { qtechAcMgmtAc 62}
qtechAcCurTotalStaSupNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object present the current ACs' max num of supported STAs."
::= { qtechAcMgmtAc 63}
qtechAcCurTotalPppoeSupNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object present the current the ACs' maximum number of pppoe authentication."
::= { qtechAcMgmtAc 64}
qtechAcNasId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NAS ID about this AC."
::= { qtechAcMgmtAc 65}
qtechAcStaLimitLicense OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max station this AC supports by license."
::= { qtechAcMgmtAc 66 }
qtechAcWtpLimitLicense OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max wtp this AC supports by license."
::= { qtechAcMgmtAc 67 }
qtechAcStaIpv6Num OBJECT-TYPE
SYNTAX INTEGER (1..24000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv6 client num in this AC."
::= { qtechAcMgmtAc 68}
qtechAcIpv6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AC's ipv6 address."
::= { qtechAcMgmtAc 69}
qtechAcIpv6Prefix OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AC's ipv6 address prefix."
::= { qtechAcMgmtAc 70}
qtechAcIpv6Type OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
unicase(1),
anycase(2),
multicase(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AC's ipv6 address type."
::= { qtechAcMgmtAc 71}
qtechAcIpv6AddrType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AC's anycast address type."
::= { qtechAcMgmtAc 72}
qtechAcKickClient OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the mac and corresponding client will be kicked. Get this object will return last kicked client."
::= { qtechAcMgmtAc 73}
qtechAcOpenStaNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Open client num in this AC."
::= { qtechAcMgmtAc 74}
qtechAcOpenStaAbnormalDownTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times open client is abnormaly offline."
::= { qtechAcMgmtAc 75}
qtechAcWepPskStaNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WEP/PSK client num in this AC."
::= { qtechAcMgmtAc 76}
qtechAcWepPskStaAbnormalDownTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The times WEP/PSK client is abnormaly offline."
::= { qtechAcMgmtAc 77}
--********************************************************************
-- **
-- AP nodes **
-- **
--********************************************************************
qtechApCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechApCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ap attributes."
::= { qtechAcMgmtAp 1 }
qtechApCfgEntry OBJECT-TYPE
SYNTAX QtechApCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get and set the Ap attribtues."
INDEX { qtechApMacAddr }
::= { qtechApCfgTable 1 }
QtechApCfgEntry ::=
SEQUENCE {
qtechApMacAddr MacAddress,
qtechApApName DisplayString,
qtechApApgName DisplayString,
qtechApDiscTimer INTEGER,
qtechApEchoReqTimer INTEGER,
qtechApEroReportTimer INTEGER,
qtechApStaTimeoutTimer INTEGER,
qtechApStatisticsTimer INTEGER,
qtechApFallback INTEGER,
qtechApImageId DisplayString,
qtechApIpDhcp INTEGER,
qtechApLocation DisplayString,
qtechApWpsMfp INTEGER,
qtechApLastRebootReason INTEGER,
qtechApEthernetIfName DisplayString,
qtechApEthernetIfMacAddress MacAddress,
qtechApEthernetIfAdminStatus INTEGER,
qtechApEthernetIfOperStatus INTEGER,
qtechApEthernetIfRxUcastPkts Counter32,
qtechApEthernetIfRxNUcastPkts Counter32,
qtechApEthernetIfTxUcastPkts Counter32,
qtechApEthernetIfTxNUcastPkts Counter32,
qtechApEthernetIfDuplex INTEGER,
qtechApEthernetIfLinkSpeed INTEGER,
qtechApEthernetIfPOEPower INTEGER,
qtechApEthernetIfRxBoardPkts Counter32,
qtechApEthernetIfRxMultiPkts Counter32,
qtechApEthernetIfTxBoardPkts Counter32,
qtechApEthernetIfTxMultiPkts Counter32,
qtechApEthernetIfDropPkts Counter32,
qtechApAdminStatus INTEGER,
qtechApSn DisplayString,
qtechApIp IpAddress,
qtechApStaNum INTEGER,
qtechApToFat INTEGER,
qtechApId INTEGER,
qtechApSwVer DisplayString,
qtechApBootVer DisplayString,
qtechApPID DisplayString,
qtechApHwVer DisplayString,
qtechApStaLimit INTEGER,
qtechApFactoryDefault INTEGER,
qtechApCpuUsageTrapTimer INTEGER,
qtechApStatTrapTimer INTEGER,
qtechApLinkOnTimeInterval INTEGER,
qtechApNetId DisplayString,
qtechApUptime DisplayString,
qtechApState INTEGER,
qtechApNasId DisplayString,
qtechApCoverArea INTEGER,
qtechApLinkOnTimeIntervalMs TimeTicks,
qtechApUptimeMs TimeTicks,
qtechApHbUptimeMs TimeTicks,
qtechApIpv6 InetAddress,
qtechApIpv6Prefix DisplayString,
qtechApIpv6PrefixLen INTEGER,
qtechApIpv6Type INTEGER,
qtechApIpv6Gateway DisplayString,
qtechApIpv6StaNum INTEGER
}
qtechApMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AP's ethernet mac address."
::= { qtechApCfgEntry 1}
-- The AP Name
qtechApApName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ap's Name."
::= { qtechApCfgEntry 2}
-- The Ap group name
qtechApApgName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ap group Name."
::= { qtechApCfgEntry 3 }
-- The Discovery timer
qtechApDiscTimer OBJECT-TYPE
SYNTAX INTEGER (2..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Discovery timer."
::= { qtechApCfgEntry 4 }
-- The Echo Request timer
qtechApEchoReqTimer OBJECT-TYPE
SYNTAX INTEGER (5..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Echo Request timer."
::= { qtechApCfgEntry 5 }
-- The Error Report timer
qtechApEroReportTimer OBJECT-TYPE
SYNTAX INTEGER (1..1080)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Error Report timer."
::= { qtechApCfgEntry 6 }
-- The Sta timeout timer
qtechApStaTimeoutTimer OBJECT-TYPE
SYNTAX INTEGER (1..2700)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"station idle timeout timer."
::= { qtechApCfgEntry 7 }
-- The Statistics timeout timer
qtechApStatisticsTimer OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"station idle timeout timer."
::= { qtechApCfgEntry 8 }
-- The fallback value, 1-enable, 2-disable
qtechApFallback OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fallback value, 1--enable, 2--disable."
::= { qtechApCfgEntry 9 }
-- The Image id
qtechApImageId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Image version."
::= { qtechApCfgEntry 10 }
-- The ip dhcp option value, 0-standard, 1-private
qtechApIpDhcp OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ip dhcp option value, 0--standard, 1--private."
::= { qtechApCfgEntry 11 }
-- The ap location
qtechApLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ap Location."
::= { qtechApCfgEntry 12}
-- 0-disable, 1-enable
qtechApWpsMfp OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0-disable, 1-enable."
::= { qtechApCfgEntry 13}
qtechApLastRebootReason OBJECT-TYPE
SYNTAX INTEGER {
notSupport(0),
acInit(1),
linkFail(2),
sWFail(3),
hWFail(4),
otherFail(5),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AP's last reboot reason."
::= { qtechApCfgEntry 14}
qtechApEthernetIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the name of the Ethernet interface."
::= { qtechApCfgEntry 15 }
qtechApEthernetIfMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents MAC address of the Ethernet interface
in the slot represented by qtechApEthernetIfSlotId."
::= { qtechApCfgEntry 16 }
qtechApEthernetIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the admin state of the physical
Ethernet interface on the AP."
::= { qtechApCfgEntry 17 }
qtechApEthernetIfOperStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the operational state of the physical
Ethernet interface on the AP."
::= { qtechApCfgEntry 18 }
qtechApEthernetIfRxUcastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of unicast packets
received on the interface."
::= { qtechApCfgEntry 19 }
qtechApEthernetIfRxNUcastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of non-unicast or
mulitcast packets received on the interface"
::= { qtechApCfgEntry 20 }
qtechApEthernetIfTxUcastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of unicast packets
transmitted on the interface."
::= { qtechApCfgEntry 21 }
qtechApEthernetIfTxNUcastPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of non-unicast or
mulitcast packets transmitted on the interface"
::= { qtechApCfgEntry 22 }
qtechApEthernetIfDuplex OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
halfduplex(2),
fullduplex(3),
auto(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents interface's duplex mode"
::= { qtechApCfgEntry 23 }
qtechApEthernetIfLinkSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Speed of the interface in units of 1,000,000 bits per second"
::= { qtechApCfgEntry 24 }
qtechApEthernetIfPOEPower OBJECT-TYPE
SYNTAX INTEGER {
none(1),
drawn(2),
notdrawn(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents whether this interface supports
Power Over Ethernet (POE)
none - POE is not supported
drawn - This interface supports POE, and power is
being drawn
notdrawn - POE power is not drawn"
::= { qtechApCfgEntry 25 }
qtechApAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents whether this interface supports
Power Over Ethernet (POE)
enable - enable to admin
disable - disable to admin"
::= { qtechApCfgEntry 26 }
qtechApEthernetIfRxBoardPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of boardcast packets received on the interface"
::= { qtechApCfgEntry 27 }
qtechApEthernetIfRxMultiPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of mulitcast packets received on the interface"
::= { qtechApCfgEntry 28 }
qtechApEthernetIfTxBoardPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of boardcast packets transmitted on the interface"
::= { qtechApCfgEntry 29 }
qtechApEthernetIfTxMultiPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of multicast packets transmitted on the interface"
::= { qtechApCfgEntry 30 }
qtechApEthernetIfDropPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents total number of packets dropped on the interface"
::= { qtechApCfgEntry 31 }
qtechApSn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents SN string of the AP."
::= { qtechApCfgEntry 32 }
qtechApIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents ip address of the AP."
::= { qtechApCfgEntry 33 }
qtechApStaNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents Sta Num attach to the AP."
::= { qtechApCfgEntry 34 }
qtechApToFat OBJECT-TYPE
SYNTAX INTEGER(0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the ap mode, 0 - fit, 1 - fat."
::= { qtechApCfgEntry 35 }
qtechApId OBJECT-TYPE
SYNTAX INTEGER(1..800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AP Id"
::= { qtechApCfgEntry 36 }
qtechApSwVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents SN string of the AP."
::= { qtechApCfgEntry 37 }
qtechApBootVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents boot version string of the AP."
::= { qtechApCfgEntry 38 }
qtechApPID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents product id string of the AP."
::= { qtechApCfgEntry 39 }
qtechApHwVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents hardware string of the AP."
::= { qtechApCfgEntry 40 }
qtechApStaLimit OBJECT-TYPE
SYNTAX INTEGER(1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents client num limit of the AP."
::= { qtechApCfgEntry 41 }
qtechApFactoryDefault OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1 -- Set the ap to reboot with the factory default configuration."
::= { qtechApCfgEntry 42 }
qtechApCpuUsageTrapTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the AP's cpu usage info trap timer,
second."
::= { qtechApCfgEntry 43 }
qtechApStatTrapTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object present the AP's radio statistic
trap timer, second."
::= { qtechApCfgEntry 44}
qtechApLinkOnTimeInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP's Link on time interval, seconds."
::= { qtechApCfgEntry 45 }
qtechApNetId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the AP's net unit code."
::= { qtechApCfgEntry 46 }
qtechApUptime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP's capwap uptime."
::= { qtechApCfgEntry 47 }
qtechApState OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP's state.
1 -- on line;
2 -- off line"
::= { qtechApCfgEntry 48 }
qtechApNasId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NAS ID about this AP."
::= { qtechApCfgEntry 49 }
qtechApCoverArea OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the AP's cover type.
1 -- Type A: School;
2 -- Type B: Airfield, Station;
3 -- Type C: Hospital, Hotel, Marketplace;
4 -- Type D: Group customers with specific WLAN requirements"
::= { qtechApCfgEntry 50 }
qtechApLinkOnTimeIntervalMs OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP's Link on time interval, 0.01seconds."
::= { qtechApCfgEntry 51 }
qtechApUptimeMs OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP's capwap uptime, 0.01seconds."
::= { qtechApCfgEntry 52 }
qtechApHbUptimeMs OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the AP's capwap hotback uptime, 0.01seconds."
::= { qtechApCfgEntry 53 }
qtechApIpv6 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents ipv6 address of the AP."
::= { qtechApCfgEntry 54 }
qtechApIpv6Prefix OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents ipv6 address prefix of the AP."
::= { qtechApCfgEntry 55 }
qtechApIpv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents ipv6 address prefix length of the AP."
::= { qtechApCfgEntry 56 }
qtechApIpv6Type OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
unicase(1),
anycase(2),
multicase(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents ipv6 address type of the AP."
::= { qtechApCfgEntry 57 }
qtechApIpv6Gateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents ipv6 gateway address of the AP."
::= { qtechApCfgEntry 58 }
qtechApIpv6StaNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents ipv6 Sta Num attach to the AP."
::= { qtechApCfgEntry 59 }
-- ***********************************
-- ap configuration per radio
-- ***********************************
qtechApCfgRadioTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechApCfgRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set the ap attribute per radio."
::= { qtechAcMgmtAp 2 }
qtechApCfgRadioEntry OBJECT-TYPE
SYNTAX QtechApCfgRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of image id table."
INDEX { qtechApMacAddr, qtechApCfgRadioId }
::= { qtechApCfgRadioTable 1 }
QtechApCfgRadioEntry ::=
SEQUENCE {
qtechApCfgRadioId INTEGER,
qtechApRadioEn INTEGER,
qtechApTxPower INTEGER,
qtechApDtimPeriod INTEGER,
qtechApBeaconPeriod INTEGER,
qtechApCountry DisplayString,
qtechApPreaShort INTEGER,
qtechApRadioBssid MacAddress,
qtechApTxPowerLevel INTEGER,
qtechApTxPowerGlobal INTEGER,
qtechApCurChan INTEGER,
qtechApRfGlobal INTEGER,
qtechApRadioType INTEGER,
qtechApRadio11bSup INTEGER,
qtechApMaxTxPower INTEGER,
qtechApMinTxPower INTEGER,
qtechApCurTxPower INTEGER,
qtechApMaxTxPowerPer INTEGER,
qtechApMinTxPowerPer INTEGER
}
-- The radio id
qtechApCfgRadioId OBJECT-TYPE
SYNTAX INTEGER (1..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The radio id, 1~31."
::= { qtechApCfgRadioEntry 1 }
-- 0-disable, 1-enable
qtechApRadioEn OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0--disable, 1--enable."
::= { qtechApCfgRadioEntry 2 }
-- The AP Tx Power
qtechApTxPower OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tx power, 1%."
::= { qtechApCfgRadioEntry 3}
-- The AP beacon dtim period
qtechApDtimPeriod OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"beacon dtim period, second."
::= { qtechApCfgRadioEntry 4}
-- The beacon period
qtechApBeaconPeriod OBJECT-TYPE
SYNTAX INTEGER (20..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"beacon period, millisecond."
::= { qtechApCfgRadioEntry 5}
-- The ap country code
qtechApCountry OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ap country code."
::= { qtechApCfgRadioEntry 6}
-- 0-not support short preamble,1-support short preamble
qtechApPreaShort OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Short preamble support."
::= { qtechApCfgRadioEntry 7}
qtechApRadioBssid OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AP's radio mac address(BSSID)."
::= { qtechApCfgRadioEntry 8}
qtechApTxPowerLevel OBJECT-TYPE
SYNTAX INTEGER (1..600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap's tx power level in the radio."
::= { qtechApCfgRadioEntry 9}
qtechApTxPowerGlobal OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ap's tx power config as the Global or not.
0--customer, 1-global."
::= { qtechApCfgRadioEntry 10}
qtechApCurChan OBJECT-TYPE
SYNTAX INTEGER (1..165)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ap's current channel in the radio."
::= { qtechApCfgRadioEntry 11}
qtechApRfGlobal OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ap's channel config as the Global or not.
0--customer, 1-global."
::= { qtechApCfgRadioEntry 12}
qtechApRadioType OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1--802.11b
2--802.11a"
::= { qtechApCfgRadioEntry 13}
qtechApRadio11bSup OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1--support 802.11b
2--not support 802.11b"
::= { qtechApCfgRadioEntry 14}
-- The AP Max Tx Power
qtechApMaxTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max tx power, mw."
::= { qtechApCfgRadioEntry 15}
-- The AP Min Tx Power
qtechApMinTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min tx power, mw."
::= { qtechApCfgRadioEntry 16}
-- The AP Current Tx Power
qtechApCurTxPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current tx power, mw."
::= { qtechApCfgRadioEntry 17}
-- The AP Max Tx Power Percent
qtechApMaxTxPowerPer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Max tx power percent, %."
::= { qtechApCfgRadioEntry 18}
-- The AP Min Tx Power Percent
qtechApMinTxPowerPer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min tx power percent, %."
::= { qtechApCfgRadioEntry 19}
qtechApRadioRateCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechApRadioRateCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rate set of the ap's radio."
::= { qtechAcMgmtAp 3 }
qtechApRadioRateCfgEntry OBJECT-TYPE
SYNTAX QtechApRadioRateCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The attribute of the ap radio rate type."
INDEX { qtechApMacAddr, qtechApCfgRadioId, qtechApRadioRate }
::= { qtechApRadioRateCfgTable 1 }
QtechApRadioRateCfgEntry ::=
SEQUENCE {
qtechApRadioRate INTEGER,
qtechApRadioRateType INTEGER
}
qtechApRadioRate OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ap's rate set in the radio.
802.11a-6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
set 1 for 6Mbps, set 2 for 9Mbps, set 3 for 12Mbps,etc...
802.11b-1, 2, 5.5, 11Mbps.
set 1 for 1Mbps, set 2 for 2Mbps, set 3 for 5.5Mbps,etc..."
::= { qtechApRadioRateCfgEntry 1}
qtechApRadioRateType OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate type:
1--disable
2--mandatory
3--support"
::= { qtechApRadioRateCfgEntry 2}
-- static ip config
qtechApStaticIpCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechApStaticIpCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The rate set of the ap's radio."
::= { qtechAcMgmtAp 4 }
qtechApStaticIpCfgEntry OBJECT-TYPE
SYNTAX QtechApStaticIpCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Config the static ip address of the ap."
INDEX { qtechApMacAddr }
::= { qtechApStaticIpCfgTable 1 }
QtechApStaticIpCfgEntry ::=
SEQUENCE {
qtechApIpAddr IpAddress,
qtechApIpMask IpAddress,
qtechApIpGetway IpAddress,
qtechApStaticIpRS RowStatus
}
qtechApIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP's Static Ip Address"
::= { qtechApStaticIpCfgEntry 1}
qtechApIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP's Static Ip Address Mask"
::= { qtechApStaticIpCfgEntry 2}
qtechApIpGetway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP's Static Ip Address Getway"
::= { qtechApStaticIpCfgEntry 3}
qtechApStaticIpRS OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP's Static Ip Address Row status"
::= { qtechApStaticIpCfgEntry 4}
qtechApOfflineTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechApOfflineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ap offline time attributes."
::= { qtechAcMgmtAp 5 }
qtechApOfflineEntry OBJECT-TYPE
SYNTAX QtechApOfflineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get and set the Ap attribtues."
INDEX { qtechApOffMacAddr }
::= { qtechApOfflineTable 1 }
QtechApOfflineEntry ::=
SEQUENCE {
qtechApOfftime INTEGER,
qtechApOffApName DisplayString,
qtechApOffMacAddr MacAddress
}
qtechApOfftime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AP's ethernet mac address."
::= { qtechApOfflineEntry 1}
-- The AP Name
qtechApOffApName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Offline Ap's Name."
::= { qtechApOfflineEntry 2}
qtechApOffMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The offline AP's ethernet mac address."
::= { qtechApOfflineEntry 3}
--********************************************************************
-- qtechApBackupState **
--********************************************************************
qtechApBackupStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechApBackupStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Ap backup state."
::= { qtechAcMgmtAp 6 }
qtechApBackupStateEntry OBJECT-TYPE
SYNTAX QtechApBackupStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Get the Ap backup state."
INDEX { qtechApMacAddr }
::= { qtechApBackupStateTable 1 }
QtechApBackupStateEntry ::=
SEQUENCE {
qtechApBackupState INTEGER
}
qtechApBackupState OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
master(1),
slave(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AP's backup state."
::= { qtechApBackupStateEntry 1 }
--********************************************************************
-- **
-- AP Group nodes **
-- **
--********************************************************************
qtechApgCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechApgCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The attribute of the ap group."
::= { qtechAcMgmtApg 1 }
qtechApgCfgEntry OBJECT-TYPE
SYNTAX QtechApgCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The attribute of the ap group."
INDEX { qtechApgApgName }
::= { qtechApgCfgTable 1 }
QtechApgCfgEntry ::=
SEQUENCE {
qtechApgApgName DisplayString,
qtechApgDiscTimer INTEGER,
qtechApgEchoReqTimer INTEGER,
qtechApgEroReportTimer INTEGER,
qtechApgStaTimeoutTimer INTEGER,
qtechApgStatisticsTimer INTEGER,
qtechApgFallback INTEGER,
qtechApgImageId DisplayString,
qtechApgCreatEn INTEGER
}
-- The AP Group Name
qtechApgApgName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ap group's Name."
::= { qtechApgCfgEntry 1}
-- The Discovery timer
qtechApgDiscTimer OBJECT-TYPE
SYNTAX INTEGER (2..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Discovery timer."
::= { qtechApgCfgEntry 2 }
-- The Echo Request timer
qtechApgEchoReqTimer OBJECT-TYPE
SYNTAX INTEGER (5..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Echo Request timer."
::= { qtechApgCfgEntry 3 }
-- The Error Report timer
qtechApgEroReportTimer OBJECT-TYPE
SYNTAX INTEGER (1..1080)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Error Report timer."
::= { qtechApgCfgEntry 4 }
-- The Sta timeout timer
qtechApgStaTimeoutTimer OBJECT-TYPE
SYNTAX INTEGER (60..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"station idle timeout timer."
::= { qtechApgCfgEntry 5 }
-- The Statistics timeout timer
qtechApgStatisticsTimer OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"station idle timeout timer."
::= { qtechApgCfgEntry 6 }
-- The fallback value, 1-enable, 2-disable
qtechApgFallback OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fallback value, 1--enable, 2--disable."
::= { qtechApgCfgEntry 7 }
-- The Image id, should be 8 bytes
qtechApgImageId OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ap image version string."
::= { qtechApgCfgEntry 8 }
-- 0-del, 1-creat
qtechApgCreatEn OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0-del, 1-creat."
::= { qtechApgCfgEntry 9 }
-- ***************************************
-- ap group attribute per radio
-- ***************************************
qtechApgCfgRadioTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechApgCfgRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ap group attribute per radio."
::= { qtechAcMgmtApg 2 }
qtechApgCfgRadioEntry OBJECT-TYPE
SYNTAX QtechApgCfgRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ap group attribute per radio."
INDEX { qtechApgApgName, qtechApgEnableRadioId}
::= { qtechApgCfgRadioTable 1 }
QtechApgCfgRadioEntry ::=
SEQUENCE {
qtechApgEnableRadioId INTEGER,
qtechApgEnableRadioEn INTEGER
}
-- The radio id
qtechApgEnableRadioId OBJECT-TYPE
SYNTAX INTEGER (1..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The radio id, 1~31."
::= { qtechApgCfgRadioEntry 1 }
-- 0-disable, 1-enable
qtechApgEnableRadioEn OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0--disable, 1--enable."
::= { qtechApgCfgRadioEntry 2 }
-- ************************************
-- wlan-cvi mapping configure
-- ************************************
qtechApgIntfMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechApgIntfMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Set the wlan-interface map table type."
::= { qtechAcMgmtApg 3 }
qtechApgIntfMapEntry OBJECT-TYPE
SYNTAX QtechApgIntfMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the wlan-interface map table."
INDEX { qtechApgApgName, qtechApgWlanIndex }
::= { qtechApgIntfMapTable 1 }
QtechApgIntfMapEntry ::=
SEQUENCE {
qtechApgWlanIndex INTEGER,
qtechApgWlanId INTEGER,
qtechApgVlanId INTEGER,
qtechApgRadioId INTEGER,
qtechApgWlanIntfMapRS RowStatus
}
-- The wlan-intf map index
qtechApgWlanIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wlan Id."
::= { qtechApgIntfMapEntry 1 }
-- The Wlan Id
qtechApgWlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wlan Id."
::= { qtechApgIntfMapEntry 2 }
-- The Intf Id
qtechApgVlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Vlan Id."
::= { qtechApgIntfMapEntry 3 }
-- The Radio Id
qtechApgRadioId OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radio Id."
::= { qtechApgIntfMapEntry 4 }
qtechApgWlanIntfMapRS OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to add or del a wlan-intf map in the ap group."
::= { qtechApgIntfMapEntry 5 }
--********************************************************************
-- **
-- WLAN nodes **
-- **
--********************************************************************
qtechWlanCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechWlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlan attribute."
::= { qtechAcMgmtWlan 1 }
qtechWlanCfgEntry OBJECT-TYPE
SYNTAX QtechWlanCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The wlan attribute."
INDEX { qtechWlanId}
::= { qtechWlanCfgTable 1 }
QtechWlanCfgEntry ::=
SEQUENCE {
qtechWlanId INTEGER,
qtechWlanShort INTEGER,
qtechWlanSpctMgmt INTEGER,
qtechWlanEnQos INTEGER,
qtechWlanShortSlotTime INTEGER,
qtechWlanEnableApsd INTEGER,
qtechWlanAckType INTEGER,
qtechWlanTunnelType INTEGER,
qtechWlanBroadSsid INTEGER,
qtechWlanRts INTEGER,
qtechWlanShortTry INTEGER,
qtechWlanLongTry INTEGER,
qtechWlanStaNum INTEGER,
qtechWlanNasId DisplayString
}
-- The Wlan id
qtechWlanId OBJECT-TYPE
SYNTAX INTEGER (1..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wlan Id."
::= { qtechWlanCfgEntry 1}
-- The short preamble value, 0-disable, 1-enable
qtechWlanShort OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Short Preamble."
::= { qtechWlanCfgEntry 2 }
-- The Spectrum_Management value, 0-disable, 1-enable
qtechWlanSpctMgmt OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Spectrum_Management."
::= { qtechWlanCfgEntry 3 }
-- The Spectrum_Management value, 0-disable, 1-enable
qtechWlanEnQos OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"enbale qos value."
::= { qtechWlanCfgEntry 4 }
-- The Spectrum_Management value, 0-disable, 1-enable
qtechWlanShortSlotTime OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"short slot time value."
::= { qtechWlanCfgEntry 5 }
-- The IEEE 802.11 Add WLAN.APSD value, 0-disable, 1-enable
qtechWlanEnableApsd OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IEEE 802.11 Add WLAN.APSD value."
::= { qtechWlanCfgEntry 6 }
-- 0-delayed, 1-immediate
qtechWlanAckType OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ack delayed or immediate value."
::= { qtechWlanCfgEntry 7 }
-- 0-local, 1-80211, 2-8023
qtechWlanTunnelType OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tunnel type value."
::= { qtechWlanCfgEntry 8 }
-- 0-disable, 1-enable
qtechWlanBroadSsid OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Broad Ssid value, 0--disable, 1--enable."
::= { qtechWlanCfgEntry 9 }
-- rts threshold
qtechWlanRts OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"rts threshold."
::= { qtechWlanCfgEntry 10 }
-- Short retries
qtechWlanShortTry OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Short retries."
::= { qtechWlanCfgEntry 11 }
-- Long retries
qtechWlanLongTry OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Long retries."
::= { qtechWlanCfgEntry 12 }
-- WLAN sta number
qtechWlanStaNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The wireless stationes attach to this wlan."
::= { qtechWlanCfgEntry 13 }
-- WLAN nas id
qtechWlanNasId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NAS ID about this wlan."
::= { qtechWlanCfgEntry 14 }
-- *******************************
-- wlan creat table
-- *******************************
qtechWlanWlanCreatTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechWlanWlanCreatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Wlan creat table."
::= { qtechAcMgmtWlan 2 }
qtechWlanWlanCreatEntry OBJECT-TYPE
SYNTAX QtechWlanWlanCreatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of Braod Ssid value table."
INDEX { qtechWlanId}
::= { qtechWlanWlanCreatTable 1 }
QtechWlanWlanCreatEntry ::=
SEQUENCE {
qtechWlanWlanSsid DisplayString,
qtechWlanWlanProfile DisplayString,
qtechWlanCreateMapRS RowStatus
}
-- ssid string
qtechWlanWlanSsid OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wlan Ssid."
::= { qtechWlanWlanCreatEntry 1 }
-- profile string
qtechWlanWlanProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wlan profile."
::= { qtechWlanWlanCreatEntry 2 }
qtechWlanCreateMapRS OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to add a wlan."
::= { qtechWlanWlanCreatEntry 3 }
-- *************************************
-- channel channel_num regulatory band {unii0-unii6} {enable|disable}
-- *************************************
qtechWlanChanBandTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechWlanChanBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Channel band table type."
::= { qtechAcMgmtWlan 3 }
qtechWlanChanBandEntry OBJECT-TYPE
SYNTAX QtechWlanChanBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of channel band table."
INDEX { qtechWlanId, qtechWlanBandV}
::= { qtechWlanChanBandTable 1 }
QtechWlanChanBandEntry ::=
SEQUENCE {
qtechWlanChanV INTEGER,
qtechWlanBandV INTEGER,
qtechWlanChanBandEn INTEGER,
qtechWlanChanBandRS RowStatus
}
-- band
qtechWlanBandV OBJECT-TYPE
SYNTAX INTEGER (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"1 for unii0, 2 for unii1 .. 7 for unii6."
::= { qtechWlanChanBandEntry 1 }
-- channel
qtechWlanChanV OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"fragment threshold."
::= { qtechWlanChanBandEntry 2 }
-- 0-disable,1-enable
qtechWlanChanBandEn OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0-disable,1-enable ."
::= { qtechWlanChanBandEntry 3 }
qtechWlanChanBandRS OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to config a wlan channel band."
::= { qtechWlanChanBandEntry 4 }
-- 15.speed speed_type radio radio_id 55555
-- ***************************************
-- regulatory limit First_Channel Number_of_Channels Mx_Tx_Power_Level
-- ***************************************
qtechWlanLimitChanTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechWlanLimitChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Channel band table type."
::= { qtechAcMgmtWlan 4 }
qtechWlanLimitChanEntry OBJECT-TYPE
SYNTAX QtechWlanLimitChanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of channel band table."
INDEX { qtechWlanId}
::= { qtechWlanLimitChanTable 1 }
QtechWlanLimitChanEntry ::=
SEQUENCE {
qtechWlanLimitChanFirstV INTEGER,
qtechWlanLimitChanNumV INTEGER,
qtechWlanLimitChanMaxTxPowerLv INTEGER,
qtechWlanLimitChanRS RowStatus
}
-- first channel
qtechWlanLimitChanFirstV OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"first channel."
::= { qtechWlanLimitChanEntry 1 }
-- Channel num
qtechWlanLimitChanNumV OBJECT-TYPE
SYNTAX INTEGER (0..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Channel num."
::= { qtechWlanLimitChanEntry 2 }
-- Max Tx Power Level
qtechWlanLimitChanMaxTxPowerLv OBJECT-TYPE
SYNTAX INTEGER (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Max Tx Power Level ."
::= { qtechWlanLimitChanEntry 3 }
qtechWlanLimitChanRS OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to config a wlan limit chan."
::= { qtechWlanLimitChanEntry 4 }
--********************************************************************
-- **
-- STA nodes **
-- **
--********************************************************************
qtechStaTable OBJECT-TYPE
SYNTAX SEQUENCE OF QtechStaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"qtech AC MGMT station table."
::= { qtechAcMgmtSta 1 }
qtechStaEntry OBJECT-TYPE
SYNTAX QtechStaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"qtech AC MGMT station entry."
INDEX { qtechStaMacAddr}
::= { qtechStaTable 1 }
QtechStaEntry ::=
SEQUENCE {
qtechStaMacAddr MacAddress,
qtechStaApMacAddr MacAddress,
qtechStaVlan INTEGER,
qtechStaWlanId INTEGER,
qtechStaIp IpAddress,
qtechStaApIp IpAddress,
qtechStaApRadioId INTEGER,
qtechStaApRadioType INTEGER,
qtechStaAssoType INTEGER,
qtechStaAuthType INTEGER,
qtechStaRoamTimesPerMin INTEGER,
qtechStaOnTimesPerHour INTEGER,
qtechStaOffTimesPerHour INTEGER,
qtechStaIpv6 InetAddress,
qtechStaAssoAuthMode INTEGER,
qtechStaNetAuthMode INTEGER,
qtechStaSsid DisplayString,
qtechStaLinkRate INTEGER,
qtechStaCurChan INTEGER,
qtechStaClientType DisplayString,
qtechStaRssi INTEGER,
qtechStaUserName DisplayString,
qtechStaTerminalType DisplayString,
qtechStaOnlineTime DisplayString,
qtechStaUpTimeInterval INTEGER
}
qtechStaMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The STA's mac address."
::= { qtechStaEntry 1}
qtechStaApMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mac address with the AP which the STA attached."
::= { qtechStaEntry 2}
qtechStaVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan id the STA belong to."
::= { qtechStaEntry 3 }
qtechStaWlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wlan id the STA belong to."
::= { qtechStaEntry 4 }
qtechStaIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents ip address of the client."
::= { qtechStaEntry 5 }
qtechStaApIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents ip address of AP which the client attaches to."
::= { qtechStaEntry 6 }
qtechStaApRadioId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents radio id of AP which the client attaches to."
::= { qtechStaEntry 7 }
qtechStaApRadioType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents ip address of AP which the client attaches to."
::= { qtechStaEntry 8 }
qtechStaAssoType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents sta's associate type."
::= { qtechStaEntry 9 }
qtechStaAuthType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents sta's authentication type."
::= { qtechStaEntry 10 }
qtechStaRoamTimesPerMin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta roaming times in the last minite."
::= { qtechStaEntry 11}
qtechStaOnTimesPerHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta turn on times in the last hour."
::= { qtechStaEntry 12}
qtechStaOffTimesPerHour OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta turn off times in the last hour."
::= { qtechStaEntry 13}
qtechStaIpv6 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta ipv6 address."
::= { qtechStaEntry 14}
qtechStaAssoAuthMode OBJECT-TYPE
SYNTAX INTEGER {
open(0),
wep(1),
dot1x-wep(2),
dot1x-wpa(3),
dot1x-wpa2(4),
mab(5),
psk-wpa(6),
psk-wpa2(7),
wapi(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta associate authentication mode."
::= { qtechStaEntry 15}
qtechStaNetAuthMode OBJECT-TYPE
SYNTAX INTEGER {
open(0),
web(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta's authentication mode after associated."
::= { qtechStaEntry 16}
qtechStaSsid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents wlan ssid with the sta associated."
::= { qtechStaEntry 17}
qtechStaLinkRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents link rate with the sta associated, unit: kbps."
::= { qtechStaEntry 18}
qtechStaCurChan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta's current channel."
::= { qtechStaEntry 19}
qtechStaClientType OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sta's type."
::= { qtechStaEntry 20 }
qtechStaRssi OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Sta's current RSSI."
::= { qtechStaEntry 21}
qtechStaUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents user name with the sta associated."
::= { qtechStaEntry 22}
qtechStaTerminalType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents terminal type with the sta associated."
::= { qtechStaEntry 23}
qtechStaOnlineTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time when sta is associated."
::= { qtechStaEntry 24}
qtechStaUpTimeInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents how long sta is online(in seconds)."
::= { qtechStaEntry 25}
-- ****************************************
--
-- Notify nodes
--
-- ****************************************
qtechNotifyApMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Represents the unique identifier of a WTP."
::= { qtechAcMgmtNtfObjects 1 }
qtechNotifyStaMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Represents the unique identifier of a STA."
::= { qtechAcMgmtNtfObjects 2 }
qtechNotifyApIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Represents the Ip address of a WTP."
::= { qtechAcMgmtNtfObjects 3 }
qtechNotifyStaIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Represents the Ip of a STA."
::= { qtechAcMgmtNtfObjects 4 }
qtechNotifyStaOperType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Represents the STA operation, 1-del,2-add,3-roaming,4-ipupdate,5-ipv6update"
::= { qtechAcMgmtNtfObjects 5 }
qtechNotifyStaApRadioId OBJECT-TYPE
SYNTAX INTEGER(1..2)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Represents the radio id which STA attach."
::= { qtechAcMgmtNtfObjects 6 }
qtechNotifyStaApRadioType OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"1--802.11b
2--802.11a"
::= { qtechAcMgmtNtfObjects 7 }
qtechNotifyStaVlanId OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Vlan Id the sta belongs to"
::= { qtechAcMgmtNtfObjects 8 }
qtechNotifyStaWlanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Wlan Id the sta belongs to"
::= { qtechAcMgmtNtfObjects 9 }
qtechNotifyAcMBChangeV OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"1 - Master to backup,
2 - Backup to master"
::= { qtechAcMgmtNtfObjects 10 }
qtechNotifyStaOperTimes OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object present the times when the
STA is active, disactive, roaming."
::= { qtechAcMgmtNtfObjects 11 }
qtechNotifyAcPowerIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object present the AC's power unit index."
::= { qtechAcMgmtNtfObjects 12 }
qtechNotifyAcPowerStatu OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object present the AC's power statu, 0-off, 1-on."
::= { qtechAcMgmtNtfObjects 13 }
qtechNotifyTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object present the sta operation current time."
::= { qtechAcMgmtNtfObjects 14 }
qtechNotifyOldVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object present the AP's old version."
::= { qtechAcMgmtNtfObjects 15 }
qtechNotifyNewVer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object present the AP's new version."
::= { qtechAcMgmtNtfObjects 16 }
qtechNotifyVerUpdtReason OBJECT-TYPE
SYNTAX INTEGER (1..6)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object present the AP's firmware updating fail reason.
1 -- Image is not ready.
2 -- AC send image fail.
3 -- Link down when update ap image.
4 -- Active image file error.
5 -- AP response error.
6 -- AP has image in flash."
::= { qtechAcMgmtNtfObjects 17 }
qtechNotifyStaIpv6 OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Sta ipv6 address."
::= { qtechAcMgmtNtfObjects 18 }
qtechNotifyStaAssoAuthMode OBJECT-TYPE
SYNTAX INTEGER {
open(0),
wep(1),
dot1x-wep(2),
dot1x-wpa(3),
dot1x-wpa2(4),
mab(5),
psk-wpa(6),
psk-wpa2(7),
wapi(8)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Sta associate authentication mode."
::= { qtechAcMgmtNtfObjects 19}
qtechNotifyStaNetAuthMode OBJECT-TYPE
SYNTAX INTEGER {
open(0),
web(1)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Sta's authentication mode after associated."
::= { qtechAcMgmtNtfObjects 20}
qtechNotifyStaSsid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The wlan ssid with the sta associated."
::= { qtechAcMgmtNtfObjects 21}
qtechNotifyStaLinkRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The link rate with the sta associated, unit: 1kbps."
::= { qtechAcMgmtNtfObjects 22}
qtechNotifyStaCurChan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Sta current use channel after associated."
::= { qtechAcMgmtNtfObjects 23}
qtechNotifyStaClientType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Sta's type."
::= { qtechAcMgmtNtfObjects 24}
qtechNotifyStaRssi OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Sta's RSSI."
::= { qtechAcMgmtNtfObjects 25}
qtechNotifyStaReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Sta's down reason."
::= { qtechAcMgmtNtfObjects 26}
qtechNotifyStaTimestamp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Seconds since device bootup when this trap is sent."
::= { qtechAcMgmtNtfObjects 27}
qtechNotifyStaOnlineTimeval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Sta's total online time in seconds."
::= { qtechAcMgmtNtfObjects 28}
qtechNotifyStaIpv4Upflow OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Sta's total IPv4 upflow in kbps."
::= { qtechAcMgmtNtfObjects 29}
qtechNotifyStaIpv4Downflow OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Sta's total IPv4 downflow in kbps."
::= { qtechAcMgmtNtfObjects 30}
qtechNotifyApTimeStampFail NOTIFICATION-TYPE
OBJECTS {
qtechNotifyApMac
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when an AP sync the time failed."
::= { qtechAcMgmtNotifications 1 }
qtechNotifyStaOper NOTIFICATION-TYPE
OBJECTS {
qtechNotifyApMac,
qtechNotifyStaMac,
qtechNotifyApIp,
qtechNotifyStaIp,
qtechNotifyStaOperType,
qtechNotifyStaApRadioId,
qtechNotifyStaApRadioType,
qtechNotifyStaVlanId,
qtechNotifyStaWlanId,
qtechNotifyTime,
qtechNotifyStaIpv6,
qtechNotifyStaAssoAuthMode,
qtechNotifyStaNetAuthMode,
qtechNotifyStaSsid,
qtechNotifyStaLinkRate,
qtechNotifyStaCurChan,
qtechNotifyStaClientType,
qtechNotifyStaRssi,
qtechNotifyStaReason
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when a sta enter or quit or ip update."
::= { qtechAcMgmtNotifications 2 }
qtechNotifyAcMBChange NOTIFICATION-TYPE
OBJECTS {
qtechNotifyAcMBChangeV
}
STATUS current
DESCRIPTION
"This notification is sent by the AC change from
smaster to backup or backup to master."
::= { qtechAcMgmtNotifications 3 }
qtechNotifyApSwUpdtFail NOTIFICATION-TYPE
OBJECTS {
qtechNotifyApMac,
qtechNotifyOldVer,
qtechNotifyNewVer,
qtechNotifyVerUpdtReason
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when update the AP software failed."
::= { qtechAcMgmtNotifications 4 }
qtechNotifyStaActOverThredhold NOTIFICATION-TYPE
OBJECTS {
qtechNotifyApMac,
qtechNotifyStaMac,
qtechNotifyStaApRadioId,
qtechNotifyStaApRadioType,
qtechNotifyStaOperTimes
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when a sta active times over thredhold."
::= { qtechAcMgmtNotifications 5 }
qtechNotifyStaDisactOverThredhold NOTIFICATION-TYPE
OBJECTS {
qtechNotifyApMac,
qtechNotifyStaMac,
qtechNotifyStaApRadioId,
qtechNotifyStaApRadioType,
qtechNotifyStaOperTimes
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when a sta's disactive times over thredhold."
::= { qtechAcMgmtNotifications 6 }
qtechNotifyStaRoamTotal NOTIFICATION-TYPE
OBJECTS {
qtechNotifyApMac,
qtechNotifyStaMac,
qtechNotifyStaApRadioId,
qtechNotifyStaApRadioType,
qtechNotifyStaOperTimes
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when a sta's total
roaming times over thredhold ."
::= { qtechAcMgmtNotifications 7 }
qtechNotifyStaRoamPerMin NOTIFICATION-TYPE
OBJECTS {
qtechNotifyApMac,
qtechNotifyStaMac,
qtechNotifyStaApRadioId,
qtechNotifyStaApRadioType,
qtechNotifyStaOperTimes
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when a sta's
roaming times per minite over thredhold ."
::= { qtechAcMgmtNotifications 8 }
qtechNotifyAcPowerStatus NOTIFICATION-TYPE
OBJECTS {
qtechNotifyAcPowerIndex,
qtechNotifyAcPowerStatu
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when the
AC's power unit status changed."
::= { qtechAcMgmtNotifications 9 }
qtechNotify86PowerOffAlarm NOTIFICATION-TYPE
OBJECTS {
qtechNotifyAcPowerIndex
}
STATUS current
DESCRIPTION
"This notification is sent by the 86 power off."
::= { qtechAcMgmtNotifications 10 }
qtechNotify86PowerOffAlarmClear NOTIFICATION-TYPE
OBJECTS {
qtechNotifyAcPowerIndex
}
STATUS current
DESCRIPTION
"This notification is sent by the 86 power on."
::= { qtechAcMgmtNotifications 11 }
qtechNotifyApSwUpdtSuccess NOTIFICATION-TYPE
OBJECTS {
qtechNotifyApMac,
qtechNotifyOldVer,
qtechNotifyNewVer
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when update the AP software success."
::= { qtechAcMgmtNotifications 12 }
qtechNotifyApUp NOTIFICATION-TYPE
OBJECTS {
qtechApMacAddr,
capwapBaseNtfChannelType,
capwapBaseNtfAuthenMethod
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when a CAPWAP channel
established."
::= { qtechAcMgmtNotifications 13 }
qtechNotifyApDown NOTIFICATION-TYPE
OBJECTS {
qtechApMacAddr,
capwapBaseNtfChannelType,
capwapBaseNtfChannelDownReason
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when CAPWAP channel
becomes down."
::= { qtechAcMgmtNotifications 14 }
qtechNotifyApSwUpdtFailApMac NOTIFICATION-TYPE
OBJECTS {
qtechApMacAddr,
qtechNotifyOldVer,
qtechNotifyNewVer,
qtechNotifyVerUpdtReason
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when update the AP software failed."
::= { qtechAcMgmtNotifications 15 }
qtechNotifyApTimeStampFailApMac NOTIFICATION-TYPE
OBJECTS {
qtechApMacAddr
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when an AP sync the time failed."
::= { qtechAcMgmtNotifications 16 }
qtechNotifyStaOperAlternate NOTIFICATION-TYPE
OBJECTS {
qtechNotifyStaOperType,
qtechNotifyStaMac,
qtechNotifyStaIp,
qtechNotifyApMac,
qtechNotifyApIp,
qtechNotifyStaApRadioId,
qtechNotifyStaApRadioType,
qtechNotifyStaWlanId,
qtechNotifyStaSsid,
qtechNotifyStaVlanId,
qtechNotifyStaLinkRate,
qtechNotifyStaCurChan,
qtechNotifyStaRssi,
qtechNotifyStaTimestamp,
qtechNotifyStaOnlineTimeval,
qtechNotifyStaIpv4Upflow,
qtechNotifyStaIpv4Downflow
}
STATUS current
DESCRIPTION
"This notification is sent by the AC when a sta is up, down or roaming."
::= { qtechAcMgmtNotifications 17 }
--********************************************************************
-- **
-- conformance information **
-- **
--********************************************************************
qtechAcMgmtAcMIBConformance OBJECT IDENTIFIER ::= { qtechAcMgmtMIB 7 }
qtechAcMgmtAcMIBCompliances OBJECT IDENTIFIER ::= { qtechAcMgmtAcMIBConformance 1 }
qtechAcMgmtAcMIBGroups OBJECT IDENTIFIER ::= { qtechAcMgmtAcMIBConformance 2 }
--********************************************************************
-- **
-- compliance statements **
-- **
--********************************************************************
qtechAcMgmtAcMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Qtech Ac Manager Ac"
MODULE -- this module
MANDATORY-GROUPS { qtechAcMgmtAcMIBGroup, qtechAcMgmtAcTrapGroup }
::= { qtechAcMgmtAcMIBCompliances 1 }
--********************************************************************
-- **
-- units of conformance **
-- **
--********************************************************************
qtechAcMgmtAcMIBGroup OBJECT-GROUP
OBJECTS {
qtechAcStaLimit,
qtechAcWtpLimit,
qtechAcRMacField,
qtechAcDataDtls,
qtechAcEcnSupport,
qtechAcBackAcIp,
qtechAcMtu,
qtechAcAcName,
qtechAcLocation,
qtechAcResetAp,
qtechAcApNum,
qtechAc80211aRateType,
qtechAc80211bRateType,
qtechAcFallback,
qtechAcStaNum,
qtechAcMacAddr,
qtechAcDescriptor,
qtechAcPID,
qtechAcHwId,
qtechAcSN,
qtechAcTemp,
qtechAcAPUpDownCtrl,
qtechAcAPJoinFailCtrl,
qtechAcAPDecryEroReportCtrl,
qtechAcApImageUpdtCtrl,
qtechAcApConfigMsgEroCtrl,
qtechAcApRadioOperStatuCtrl,
qtechAcApAuthenFailCtrl,
qtechAcApTimestampCtrl,
qtechAcStaOperCtrl,
qtechAcType,
qtechAcNeid,
qtechAcManufacturer,
qtechAcSwVer,
qtechAcSwManufacturer,
qtechAcStaResourceNotEnough,
qtechAcPppoeClientAct,
qtechAcPppoeClientMax,
qtechAcStaActThredhold,
qtechAcStaDisactThredhold,
qtechAcStaTotalRoamThredhold,
qtechAcStaPerRoamThredhold,
qtechAcStaOffLineRemainTime,
qtechAcStaOffLineNumber,
qtechAcStaOffLineDelSingle,
qtechAcStaOffLineDelAll,
qtechAcRmOffLineApConfig,
qtechAcFlowBlApName1,
qtechAcFlowBlApName2,
qtechAcFlowBlApName3,
qtechAcFlowBlApName4,
qtechAcFlowBlApName5,
qtechAcFlowBlApName6,
qtechAcFlowBlApName7,
qtechAcFlowBlApName8,
qtechAcFlowBlApName9,
qtechAcFlowBlApName10,
qtechAcFlowBlNum,
qtechAcFlowBlRS,
qtechAcNumBlApName1,
qtechAcNumBlApName2,
qtechAcNumBlApName3,
qtechAcNumBlApName4,
qtechAcNumBlApName5,
qtechAcNumBlApName6,
qtechAcNumBlApName7,
qtechAcNumBlApName8,
qtechAcNumBlApName9,
qtechAcNumBlApName10,
qtechAcNumBlNum,
qtechAcNumBlRS,
qtechAcInAcRoamNum,
qtechAcBetweenAcRoamInNum,
qtechAcStaOnOverThrodOperCtrl,
qtechAcStaOffOverThrodOperCtrl,
qtechAcBetweenAcRoamOutNum,
qtechAcCpusageSwitch,
qtechAcCpuUsageTrapTimer,
qtechAcStatTrapTimer,
qtechAcHeartBeat,
qtechAcTotalApSupNum,
qtechAcTotalStaSupNum,
qtechAcTotalPppoeSupNum,
qtechAcCurTotalApSupNum,
qtechAcCurTotalStaSupNum,
qtechAcCurTotalPppoeSupNum,
qtechAcNasId,
qtechAcStaLimitLicense,
qtechAcWtpLimitLicense,
qtechAcStaIpv6Num,
qtechAcIpv6,
qtechAcIpv6Prefix,
qtechAcIpv6Type,
qtechAcIpv6AddrType,
qtechApApName,
qtechApApgName,
qtechApDiscTimer,
qtechApEchoReqTimer,
qtechApEroReportTimer,
qtechApStaTimeoutTimer,
qtechApStatisticsTimer,
qtechApFallback,
qtechApImageId,
qtechApIpDhcp,
qtechApLocation,
qtechApWpsMfp,
qtechApLastRebootReason,
qtechApEthernetIfName,
qtechApEthernetIfMacAddress,
qtechApEthernetIfAdminStatus,
qtechApEthernetIfOperStatus,
qtechApEthernetIfRxUcastPkts,
qtechApEthernetIfRxNUcastPkts,
qtechApEthernetIfTxUcastPkts,
qtechApEthernetIfTxNUcastPkts,
qtechApEthernetIfDuplex,
qtechApEthernetIfLinkSpeed,
qtechApEthernetIfPOEPower,
qtechApAdminStatus,
qtechApEthernetIfRxBoardPkts,
qtechApEthernetIfRxMultiPkts,
qtechApEthernetIfTxBoardPkts,
qtechApEthernetIfTxMultiPkts,
qtechApEthernetIfDropPkts,
qtechApSn,
qtechApIp,
qtechApStaNum,
qtechApToFat,
qtechApId,
qtechApSwVer,
qtechApBootVer,
qtechApPID,
qtechApHwVer,
qtechApStaLimit,
qtechApFactoryDefault,
qtechApCpuUsageTrapTimer,
qtechApStatTrapTimer,
qtechApLinkOnTimeInterval,
qtechApNetId,
qtechApUptime,
qtechApOfftime,
qtechApState,
qtechApNasId,
qtechApCoverArea,
qtechApLinkOnTimeIntervalMs,
qtechApUptimeMs,
qtechApHbUptimeMs,
qtechApIpv6,
qtechApIpv6Prefix,
qtechApIpv6PrefixLen,
qtechApIpv6Type,
qtechApIpv6Gateway,
qtechApIpv6StaNum,
qtechApRadioEn,
qtechApTxPower,
qtechApDtimPeriod,
qtechApBeaconPeriod,
qtechApCountry,
qtechApPreaShort,
qtechApRadioBssid,
qtechApTxPowerLevel,
qtechApTxPowerGlobal,
qtechApCurChan,
qtechApRfGlobal,
qtechApRadioRateType,
qtechApRadioType,
qtechApRadio11bSup,
qtechApMaxTxPower,
qtechApMinTxPower,
qtechApCurTxPower,
qtechApMaxTxPowerPer,
qtechApMinTxPowerPer,
qtechApIpAddr,
qtechApIpMask,
qtechApIpGetway,
qtechApStaticIpRS,
qtechApgDiscTimer,
qtechApgEchoReqTimer,
qtechApgEroReportTimer,
qtechApgStaTimeoutTimer,
qtechApgStatisticsTimer,
qtechApgFallback,
qtechApgImageId,
qtechApgCreatEn,
qtechApgEnableRadioEn,
qtechApgWlanId,
qtechApgVlanId,
qtechApgWlanIntfMapRS,
qtechWlanShort,
qtechWlanSpctMgmt,
qtechWlanEnQos,
qtechWlanShortSlotTime,
qtechWlanEnableApsd,
qtechWlanAckType,
qtechWlanTunnelType,
qtechWlanBroadSsid,
qtechWlanWlanSsid,
qtechWlanWlanProfile,
qtechWlanCreateMapRS,
qtechWlanRts,
qtechWlanShortTry,
qtechWlanLongTry,
qtechWlanStaNum,
qtechWlanNasId,
qtechWlanChanV,
qtechWlanChanBandEn,
qtechWlanLimitChanRS,
qtechWlanChanBandRS,
qtechStaApMacAddr,
qtechStaVlan,
qtechStaWlanId,
qtechStaIp,
qtechStaApIp,
qtechStaApRadioId,
qtechStaApRadioType,
qtechStaAssoType,
qtechStaAuthType,
qtechStaRoamTimesPerMin,
qtechStaOnTimesPerHour,
qtechStaOffTimesPerHour,
qtechNotifyApMac,
qtechNotifyStaMac,
qtechNotifyApIp,
qtechNotifyStaIp,
qtechNotifyStaOperType,
qtechNotifyStaApRadioId,
qtechNotifyStaApRadioType,
qtechNotifyStaVlanId,
qtechNotifyStaWlanId,
qtechNotifyTime,
qtechNotifyOldVer,
qtechNotifyNewVer,
qtechNotifyVerUpdtReason,
qtechNotifyAcMBChangeV,
qtechNotifyStaOperTimes,
qtechNotifyAcPowerIndex,
qtechNotifyAcPowerStatu,
qtechAcKickClient,
qtechAcOpenStaNum,
qtechAcOpenStaAbnormalDownTimes,
qtechAcWepPskStaNum,
qtechAcWepPskStaAbnormalDownTimes
}
STATUS current
DESCRIPTION
"A collection of objects providing ac manager (echo) ability to a
Qtech agent."
::= { qtechAcMgmtAcMIBGroups 1 }
qtechAcMgmtAcTrapGroup NOTIFICATION-GROUP
NOTIFICATIONS {
qtechNotifyApTimeStampFail,
qtechNotifyStaOper,
qtechNotifyAcMBChange,
qtechNotifyApSwUpdtFail,
qtechNotifyStaActOverThredhold,
qtechNotifyStaDisactOverThredhold,
qtechNotifyStaRoamTotal,
qtechNotifyStaRoamPerMin,
qtechNotifyAcPowerStatus,
qtechNotify86PowerOffAlarm,
qtechNotify86PowerOffAlarmClear,
qtechNotifyApSwUpdtSuccess,
qtechNotifyApUp,
qtechNotifyApDown,
qtechNotifyApSwUpdtFailApMac,
qtechNotifyApTimeStampFailApMac
}
STATUS current
DESCRIPTION
"A collection of traps providing ac manager (echo) ability to a
Qtech agent."
::= { qtechAcMgmtAcMIBGroups 2 }
END
View Git Blame Copy Permalink