WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/qtech/QTECH-3G-MIB

1713 lines
47 KiB
Plaintext
Raw Blame History

-- ====================================================================
-- Copyright (c) 2011 by Qtech Networks Co.,Ltd. All rights reserved.
--
-- Description: The MIB is designed to get 3G wireless safenet solution statistic information.
-- Reference: rujie Enterprise MIB
-- =====================================================================
QTECH-3G-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString,TEXTUAL-CONVENTION,TimeStamp
FROM SNMPv2-TC
IpAddress, Integer32, Counter32, Counter64, OBJECT-TYPE,
MODULE-IDENTITY, Gauge32, NOTIFICATION-TYPE, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
qtechMgmt
FROM QTECH-SMI;
qtech3GMonitor MODULE-IDENTITY
LAST-UPDATED "201102220000Z"
ORGANIZATION
"Qtech Networks Co.,Ltd."
CONTACT-INFO
"Tel: 4008-111-000
E-mail: service@qtech.com.cn"
DESCRIPTION
"The MIB is designed to get statistic information of
3G wireless safenet. With this MIB, we can get information of a certain
3G user or all users."
REVISION "201102220000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { qtechMgmt 95 }
-- ========================================================================
-- Node definitions
-- ========================================================================
--Begin the node of qtech3GObjects.
qtech3GObjects OBJECT IDENTIFIER ::= { qtech3GMonitor 1 }
-- ===============================================
-- Begin the table of qtech3GTable.
-- ===============================================
qtech3GTable OBJECT-TYPE
SYNTAX SEQUENCE OF Qtech3GEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 3G connection infomation fot every user. There is one
entry in this table for each active 3G connection."
::= { qtech3GObjects 1 }
qtech3GEntry OBJECT-TYPE
SYNTAX Qtech3GEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about qtech3GTunnelTable."
INDEX { qtech3GIPAddr }
::= { qtech3GTable 1 }
Qtech3GEntry ::=
SEQUENCE {
qtech3gUsername
DisplayString,
qtech3GOnlineStatus
INTEGER,
qtech3GIMEI
DisplayString,
qtech3GIPAddrType
INTEGER,
qtech3GIPAddr
IpAddress,
qtech3GUplineTime
TimeStamp,
qtech3GActiveTime
Integer32,
qtech3GSignalStrength
Integer32,
qtech3GISP
INTEGER,
qtech3GSysMode
INTEGER,
qtech3GServiceStatus
INTEGER,
qtech3GRoamingStatus
INTEGER,
qtech3GDomain
INTEGER,
qtech3GSIMStatus
INTEGER,
qtech3GSignalStrengthPercent
Integer32,
qtech3GApn
DisplayString,
qtech3GCellID
Integer32,
qtech3GLAC
Integer32,
qtech3GBSID
Integer32,
qtech3GSID
Integer32,
qtech3GNID
Integer32,
qtech3GIMSI
DisplayString,
qtech3GESN
DisplayString,
qtech3GPhoneNumber
DisplayString,
qtech3GifIndex
INTEGER,
qtech3GBSLONG
Integer32,
qtech3GBSLAT
Integer32,
qtech3GBackupInfo
INTEGER,
qtech3GSerialNumber
DisplayString,
qtech3GBackupIMSI
DisplayString,
qtech3GGatewayIPAddr
IpAddress,
qtech3GLineDownCause
Integer32,
qtech3GModemType
INTEGER
}
qtech3gUsername OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Username of 3G User."
::= { qtech3GEntry 1 }
qtech3GOnlineStatus OBJECT-TYPE
SYNTAX INTEGER
{
lpm(0),
online(1),
offline(4),
ftm(5),
reset(6),
rfOff(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the status of 3G user. online or offline"
::= { qtech3GEntry 2 }
qtech3GIMEI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the IMEI number of 3G user."
::= { qtech3GEntry 3 }
qtech3GIPAddrType OBJECT-TYPE
SYNTAX INTEGER {
ipv4Addr(1),
ipv6Addr(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address type of remote user."
::= { qtech3GEntry 4 }
qtech3GIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 3G remote users's IP address."
::= { qtech3GEntry 5 }
qtech3GUplineTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of up line time for this 3G user."
::= { qtech3GEntry 6 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.7
qtech3GActiveTime OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of the 3G connection has been active for one user.
2147483647 is defined as invalid value."
::= { qtech3GEntry 7 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.8
qtech3GSignalStrength OBJECT-TYPE
SYNTAX Integer32 (-150..0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The signal strength of the 3G connection for this user."
::= { qtech3GEntry 8 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.9
qtech3GISP OBJECT-TYPE
SYNTAX INTEGER
{
chinaUnicom(1),
chinaTelecom(2),
chinaMobile(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the ISP of 3G networsk."
::= { qtech3GEntry 9 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.10
qtech3GSysMode OBJECT-TYPE
SYNTAX INTEGER
{
noService(0),
amps(1),
cdma(2),
gsmGprs(3),
hdr(4),
wcdma(5),
gps(6),
gsmCdma(7),
cdmaHdrHybrid(8),
tdscdma(15),
td-1te(100),
fdd-lte(101)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the system mode of 3G networsk."
::= { qtech3GEntry 10 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.11
qtech3GServiceStatus OBJECT-TYPE
SYNTAX INTEGER
{
noService(0),
restricted(1),
valid(2),
restrictedRegional(3),
powerSavingAndDeepSleepState(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the sevice status of 3G user."
::= { qtech3GEntry 11 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.12
qtech3GRoamingStatus OBJECT-TYPE
SYNTAX INTEGER
{
noRoaming(0),
roaming(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the roaming status of 3G user."
::= { qtech3GEntry 12 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.13
qtech3GDomain OBJECT-TYPE
SYNTAX INTEGER
{
noService(0),
onlyCS(1),
onlyPS(2),
pSCS(3),
pSCSnotRegistered(4),
ePSService(100),
cdmaNotSupport(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the Domain status of 3G user ."
::= { qtech3GEntry 13 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.14
qtech3GSIMStatus OBJECT-TYPE
SYNTAX INTEGER
{
invalidUsimCard(0),
validUsimCard(1),
invalidForCS(2),
invalidForPS(3),
invalidForCSPS(4),
noUsimCard(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the SIM card status of 3G user."
::= { qtech3GEntry 14 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.15
qtech3GSignalStrengthPercent OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percent of signal strength of the 3G connection for this user."
::= { qtech3GEntry 15 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.16
qtech3GApn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access-point of 3G User(only used in TD-SCDMA and WCDMA)."
::= { qtech3GEntry 16 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.17
qtech3GCellID OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access Cell id of 3G User(only used in TD-SCDMA and WCDMA)."
::= { qtech3GEntry 17 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.18
qtech3GLAC OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Location Area Code of 3G User(only used in TD-SCDMA and WCDMA)."
::= { qtech3GEntry 18 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.19
qtech3GBSID OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Base Station ID of 3G User(only used in CDMA2000)."
::= { qtech3GEntry 19 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.20
qtech3GNID OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Network ID of 3G User(only used in CDMA2000)."
::= { qtech3GEntry 20 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.21
qtech3GSID OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The System ID of 3G User(only used in CDMA2000)."
::= { qtech3GEntry 21 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.22
qtech3GIMSI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IMSI of 3G User."
::= { qtech3GEntry 22 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.23
qtech3GESN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ESN of 3G User(only used in CDMA2000)."
::= { qtech3GEntry 23 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.24
qtech3GPhoneNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Phone Number of 3G User."
::= { qtech3GEntry 24 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.25
qtech3GifIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Index of 3G Interface."
::= { qtech3GEntry 25 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.26
qtech3GBSLONG OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The longitude of 3G User(only used in CDMA2000)."
::= { qtech3GEntry 26 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.27
qtech3GBSLAT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The latitude of 3G User(only used in CDMA2000)."
::= { qtech3GEntry 27 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.28
qtech3GBackupInfo OBJECT-TYPE
SYNTAX INTEGER
{
no-backup(0),
myself(1),
master(2),
slave(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup info of 3G line."
::= { qtech3GEntry 28 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.29
qtech3GSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of 3G router."
::= { qtech3GEntry 29 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.30
qtech3GBackupIMSI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IMSI of 3G backup line."
::= { qtech3GEntry 30 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.31
qtech3GGatewayIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the 3g gateway."
::= { qtech3GEntry 31 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.1.1.32
qtech3GLineDownCause OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cause of line down."
::= { qtech3GEntry 32 }
qtech3GModemType OBJECT-TYPE
SYNTAX INTEGER
{
modem-type-3G(1),
modem-type-4G(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the type of modem used in router."
::= { qtech3GEntry 33 }
-- ===============================================
-- Begin the table of qtech3GstatTable.
-- ===============================================
qtech3GStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF Qtech3GStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 3G connection infomation fot every user. There is one
entry in this table for each active 3G connection."
::= { qtech3GObjects 2 }
qtech3GStatEntry OBJECT-TYPE
SYNTAX Qtech3GStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about qtech3GTunnelTable."
INDEX { qtech3GIPAddr }
::= { qtech3GStatTable 1 }
Qtech3GStatEntry ::=
SEQUENCE {
qtech3GInOctets
Counter64,
qtech3GOutOctets
Counter64,
qtech3GInSpeed
Counter64,
qtech3GOutSpeed
Counter64,
qtech3G2IMSI
DisplayString,
qtech3G2ifIndex
INTEGER
}
qtech3GInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received by this 3G user."
::= { qtech3GStatEntry 1 }
qtech3GOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets sent by this 3G user."
::= { qtech3GStatEntry 2 }
qtech3GInSpeed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Speed(bps) of packets received by this 3G user."
::= { qtech3GStatEntry 3 }
qtech3GOutSpeed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Speed(bps) of packets snet by this 3G user."
::= { qtech3GStatEntry 4 }
qtech3G2IMSI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IMSI of 3G User."
::= { qtech3GStatEntry 5 }
qtech3G2ifIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Index of 3G Interface."
::= { qtech3GStatEntry 6 }
-- ===============================================
-- Begin the qtech3GTrapObject.
-- ===============================================
qtech3GTrap OBJECT IDENTIFIER ::= { qtech3GObjects 3 }
qtech3GNotifications OBJECT IDENTIFIER ::= { qtech3GTrap 1 }
qtech3GSignalThreshold NOTIFICATION-TYPE
OBJECTS {
qtech3GIPAddr,
qtech3GSignalStrength,
qtech3GSignalStrengthPercent,
qtech3GIMSI
}
STATUS current
DESCRIPTION
"This notification is generated when 3G signal is lower
than the specific Threshold value."
::= { qtech3GNotifications 1 }
qtech3GUpLine NOTIFICATION-TYPE
OBJECTS {
qtech3GIPAddr,
qtech3gUsername,
qtech3GIMSI,
qtech3GBackupInfo,
qtech3GSerialNumber,
qtech3GGatewayIPAddr
}
STATUS current
DESCRIPTION
"This notification is generated when 3G user up line."
::= { qtech3GNotifications 2 }
qtech3GDownLine NOTIFICATION-TYPE
OBJECTS {
qtech3GLineDownCause,
qtech3GIPAddr,
qtech3gUsername,
qtech3GIMSI
}
STATUS current
DESCRIPTION
"This notification is generated when 3G user down line."
::= { qtech3GNotifications 3 }
qtech3GChangeAccessPoint NOTIFICATION-TYPE
OBJECTS {
qtech3GIPAddr,
qtech3GApn,
qtech3gUsername,
qtech3GIMSI
}
STATUS current
DESCRIPTION
"This notification is generated when 3G change access point."
::= { qtech3GNotifications 4 }
qtech3GBackupIntfSwitch NOTIFICATION-TYPE
OBJECTS {
qtech3GIPAddr,
qtech3gUsername,
qtech3GIMSI,
qtech3GSerialNumber,
qtech3GBackupIMSI
}
STATUS current
DESCRIPTION
"This notification is generated when 3G switch to backup interface
in double card backup configuration."
::= { qtech3GNotifications 5 }
qtech3GBaseSationSwitch NOTIFICATION-TYPE
OBJECTS {
qtech3GISP,
qtech3GCellID,
qtech3GLAC,
qtech3GBSID,
qtech3GSID,
qtech3GNID,
qtech3GIMSI,
qtech3GPhoneNumber
}
STATUS current
DESCRIPTION
"This notification is generated when the access base station changes."
::= { qtech3GNotifications 6 }
qtech3GTrafficInformation NOTIFICATION-TYPE
OBJECTS {
qtech3GIPAddr,
qtech3GIMSI,
qtech3GSerialNumber,
qtech3GInOctets,
qtech3GOutOctets
}
STATUS current
DESCRIPTION
"This notification is used for reporting the traffic information of 3G user regularly. "
::= { qtech3GNotifications 7 }
-- ===============================================
-- Begin the scalar parameters
-- ===============================================
qtech3GBsNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Base Station available on the system"
::= { qtech3GObjects 4 }
-- ===============================================
-- Begin the table of qtech3GBsTable.
-- ===============================================
qtech3GBsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Qtech3GBsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Base Station Information."
::= { qtech3GObjects 5 }
qtech3GBsEntry OBJECT-TYPE
SYNTAX Qtech3GBsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Base Station."
INDEX { qtech3GBsSN }
::= { qtech3GBsTable 1 }
Qtech3GBsEntry ::=
SEQUENCE {
qtech3GBsSN
Integer32,
qtech3GBsISP
INTEGER,
qtech3GBsMode
INTEGER,
qtech3GBsIMSI
DisplayString,
qtech3GBsLAC
Integer32,
qtech3GBsCellID
Integer32,
qtech3GBsBSID
Integer32,
qtech3GBsSID
Integer32,
qtech3GBsNID
Integer32,
qtech3GBsRssi
Integer32,
qtech3GBsBSLONG
Integer32,
qtech3GBsBSLAT
Integer32
}
qtech3GBsSN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the Sequence Of The Base Station."
::= { qtech3GBsEntry 1 }
qtech3GBsISP OBJECT-TYPE
SYNTAX INTEGER
{
chinaUnicom(1),
chinaTelecom(2),
chinaMobile(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the ISP of 3G networsk."
::= { qtech3GBsEntry 2 }
qtech3GBsMode OBJECT-TYPE
SYNTAX INTEGER
{
sys2GMode(1),
sys3GMode(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the sys mode of 3G networsk."
::= { qtech3GBsEntry 3 }
qtech3GBsIMSI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IMSI of 3G User."
::= { qtech3GBsEntry 4 }
qtech3GBsLAC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Location Area Code of 3G User(only used in TD-SCDMA and WCDMA)."
::= { qtech3GBsEntry 5 }
qtech3GBsCellID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access Cell id of 3G User(only used in TD-SCDMA and WCDMA)."
::= { qtech3GBsEntry 6 }
qtech3GBsBSID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Base Station ID of 3G User(only used in CDMA2000)."
::= { qtech3GBsEntry 7 }
qtech3GBsSID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The System ID of 3G User(only used in CDMA2000)."
::= { qtech3GBsEntry 8 }
qtech3GBsNID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Network ID of 3G User(only used in CDMA2000)."
::= { qtech3GBsEntry 9 }
qtech3GBsRssi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the strength of the connection."
::= { qtech3GBsEntry 10 }
qtech3GBsBSLONG OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The longitude of 3G User(only used in CDMA2000)."
::= { qtech3GBsEntry 11 }
qtech3GBsBSLAT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The latitude of 3G User(only used in CDMA2000)."
::= { qtech3GBsEntry 12 }
-- ===============================================
-- Begin the table of qtech3GDeviceManagementTable.
-- ===============================================
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6
qtech3GDeviceManagementTable OBJECT-TYPE
SYNTAX SEQUENCE OF Qtech3GDeviceManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 3G equipment infomation."
::= { qtech3GObjects 6 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1
qtech3GDeviceManagementEntry OBJECT-TYPE
SYNTAX Qtech3GDeviceManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about qtech3GDeviceManagementTable."
INDEX { qtech3GRouterSlotNumber }
::= { qtech3GDeviceManagementTable 1 }
Qtech3GDeviceManagementEntry ::=
SEQUENCE {
qtech3GRouterType
DisplayString,
qtech3GRouterSN
DisplayString,
qtech3GRouterSlotNumber
DisplayString,
qtech3GLineCardType
DisplayString,
qtech3GCardIMSI
DisplayString,
qtech3GModemIMEI
DisplayString,
qtech3GIntfIPAddr
IpAddress,
qtech3GCardPhoneNumber
DisplayString,
qtech3GLineDetected
Unsigned32,
qtech3GLineDetectedResult
INTEGER,
qtech3GLineDetectedMainCause
INTEGER,
qtech3GLineDetectedSubCause
INTEGER,
qtech3GDeviceBackupInfo
INTEGER,
qtech3GRssiStrength
Integer32,
qtech3GRssiStrengthPercent
Integer32,
qtech3GNetworkISPMode
INTEGER,
qtech3GNetworkSysMode
INTEGER,
qtech3GNetworkServiceStatus
INTEGER,
qtech3GSIMCardStatus
INTEGER,
qtech3GDailMode
INTEGER,
qtech3GDeviceBackupIMSI
DisplayString,
qtech3GLineDetectedMode
INTEGER,
qtech3GPppUsername
DisplayString,
qtech3GUserApn
DisplayString,
qtech3GModemOnlineStatus
INTEGER,
qtech3GIntfIPAddrType
INTEGER,
qtech3GUserUplineTime
TimeStamp,
qtech3GUserActiveTime
Integer32,
qtech3GSIMRoamingStatus
INTEGER,
qtech3GAcessBSCellID
Integer32,
qtech3GAcessBSLAC
Integer32,
qtech3GAcessBSLONG
Integer32,
qtech3GAcessBSLAT
Integer32,
qtech3GDialOnDemandIfIndex
Integer32,
qtech3GTrafficPreventMode
INTEGER,
qtech3GTrafficPreventIfIndex
INTEGER,
qtech3GTrafficPreventListID
INTEGER,
qtech3GTrafficPreventListName
DisplayString,
qtech3GDeviceModemType
INTEGER,
qtech3GTrafficTrapInterval
Integer32,
qtech3GRssiThreshold
Integer32,
qtech3GTrapFilterMode
INTEGER,
qtech3GISPtimeout
Integer32,
qtech3GEncrypt_type
INTEGER,
qtech3GPassword
DisplayString
}
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.1
qtech3GRouterType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Equipment tpye of 3G router."
::= { qtech3GDeviceManagementEntry 1 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.2
qtech3GRouterSN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of 3G router."
::= { qtech3GDeviceManagementEntry 2 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.3
qtech3GRouterSlotNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the activity slot in 3G router."
::= { qtech3GDeviceManagementEntry 3 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.4
qtech3GLineCardType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tpye of 3G router line card."
::= { qtech3GDeviceManagementEntry 4 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.5
qtech3GCardIMSI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IMSI of 3G User."
::= { qtech3GDeviceManagementEntry 5 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.6
qtech3GModemIMEI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IMEI number of 3G user."
::= { qtech3GDeviceManagementEntry 6 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.7
qtech3GIntfIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address of 3G interface."
::= { qtech3GDeviceManagementEntry 7 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.8
qtech3GCardPhoneNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Phone Number of 3G User."
::= { qtech3GDeviceManagementEntry 8 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.9
qtech3GLineDetected OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The command is used for Detecting 3G line."
::= { qtech3GDeviceManagementEntry 9 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.10
qtech3GLineDetectedResult OBJECT-TYPE
SYNTAX INTEGER
{
noRsponse(0),
pass(1),
failed(2),
using(3),
detecting(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of 3G line detection."
::= { qtech3GDeviceManagementEntry 10 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.11
qtech3GLineDetectedMainCause OBJECT-TYPE
SYNTAX INTEGER
{
noGivenReason(0),
dialFailed(1),
pppFailed(2),
ipsecSetupFailed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The main cause of 3G line detection filed."
::= { qtech3GDeviceManagementEntry 11 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.12
qtech3GLineDetectedSubCause OBJECT-TYPE
SYNTAX INTEGER
{
noGivenReason(0),
simCardInvalid(1),
aPNInvalid(2),
powerlower(3),
userInfoError(4),
ipsecSetupFailed(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The details cause of 3G line detection filed."
::= { qtech3GDeviceManagementEntry 12 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.13
qtech3GDeviceBackupInfo OBJECT-TYPE
SYNTAX INTEGER
{
no-backup(0),
myself(1),
master(2),
slave(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup info of 3G line."
::= { qtech3GDeviceManagementEntry 13 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.14
qtech3GRssiStrength OBJECT-TYPE
SYNTAX Integer32 (-150..0)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The signal strength of the 3G connection for this user."
::= { qtech3GDeviceManagementEntry 14 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.15
qtech3GRssiStrengthPercent OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percent of signal strength of the 3G connection for this user."
::= { qtech3GDeviceManagementEntry 15 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.16
qtech3GNetworkISPMode OBJECT-TYPE
SYNTAX INTEGER
{
chinaUnicom(1),
chinaTelecom(2),
chinaMobile(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the ISP of 3G networsk."
::= { qtech3GDeviceManagementEntry 16 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.17
qtech3GNetworkSysMode OBJECT-TYPE
SYNTAX INTEGER
{
noService(0),
amps(1),
cdma(2),
gsmGprs(3),
hdr(4),
wcdma(5),
gps(6),
gsmCdma(7),
cdmaHdrHybrid(8),
td-scdma(15),
td-1te(100),
fdd-lte(101)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the system mode of 3G networsk."
::= { qtech3GDeviceManagementEntry 17 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.18
qtech3GNetworkServiceStatus OBJECT-TYPE
SYNTAX INTEGER
{
noService(0),
restricted(1),
valid(2),
restrictedRegional(3),
powerSavingAndDeepSleepState(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the sevice status of 3G user."
::= { qtech3GDeviceManagementEntry 18 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.19
qtech3GSIMCardStatus OBJECT-TYPE
SYNTAX INTEGER
{
invalidUsimCard(0),
validUsimCard(1),
invalidForCS(2),
invalidForPS(3),
invalidForCSPS(4),
noUsimCard(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the SIM card status of 3G user."
::= { qtech3GDeviceManagementEntry 19 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.20
qtech3GDailMode OBJECT-TYPE
SYNTAX INTEGER
{
dialOnDemand(0),
autoDail(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the dial mode of 3G user."
::= { qtech3GDeviceManagementEntry 20 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.21
qtech3GDeviceBackupIMSI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IMSI of 3G backup line."
::= { qtech3GDeviceManagementEntry 21 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.22
qtech3GLineDetectedMode OBJECT-TYPE
SYNTAX INTEGER
{
vpdnMode(0),
ipsecMode(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of 3G backup line detected."
::= { qtech3GDeviceManagementEntry 22 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.23
qtech3GPppUsername OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Username of 3G or 4G User."
::= { qtech3GDeviceManagementEntry 23 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.24
qtech3GUserApn OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The access-point of 3G or 4G User."
::= { qtech3GDeviceManagementEntry 24 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.25
qtech3GModemOnlineStatus OBJECT-TYPE
SYNTAX INTEGER
{
minimum-function(0),
fully-function(1),
offline-mode(2),
sim-activate(3),
sim-deactivate(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 3G or 4G user. online or offline."
::= { qtech3GDeviceManagementEntry 25 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.26
qtech3GIntfIPAddrType OBJECT-TYPE
SYNTAX INTEGER
{
ipv4Addr(1),
ipv6Addr(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP Address type of remote user"
::= { qtech3GDeviceManagementEntry 26 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.27
qtech3GUserUplineTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upline time of the 3G or 4G user after system start"
::= { qtech3GDeviceManagementEntry 27 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.28
qtech3GUserActiveTime OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of the 3G or 4g connection has been active for one user."
::= { qtech3GDeviceManagementEntry 28 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.29
qtech3GSIMRoamingStatus OBJECT-TYPE
SYNTAX INTEGER
{
noRoaming(0),
roaming(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the romain status of 3G user ."
::= { qtech3GDeviceManagementEntry 29 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.30
qtech3GAcessBSCellID OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The access Cell id of 3G or 4g User."
::= { qtech3GDeviceManagementEntry 30 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.31
qtech3GAcessBSLAC OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Location Area Code of 3G User."
::= { qtech3GDeviceManagementEntry 31 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.32
qtech3GAcessBSLONG OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The longitude of 3G User."
::= { qtech3GDeviceManagementEntry 32 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.33
qtech3GAcessBSLAT OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The latitude of 3G User."
::= { qtech3GDeviceManagementEntry 33 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.34
qtech3GDialOnDemandIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Index of trigger dial-up interface."
::= { qtech3GDeviceManagementEntry 34 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.35
qtech3GTrafficPreventMode OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the traffic prevent function appliled currently "
::= { qtech3GDeviceManagementEntry 35 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.36
qtech3GTrafficPreventIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Index of traffic-prevent interface."
::= { qtech3GDeviceManagementEntry 36 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.37
qtech3GTrafficPreventListID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Index of traffic-prevent Acl list id."
::= { qtech3GDeviceManagementEntry 37 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.38
qtech3GTrafficPreventListName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Index of traffic-prevent Acl list name."
::= { qtech3GDeviceManagementEntry 38 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.39
qtech3GDeviceModemType OBJECT-TYPE
SYNTAX INTEGER
{
modem-type-3G(1),
modem-type-4G(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the type of modem used in router."
::= { qtech3GDeviceManagementEntry 39 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.40
qtech3GTrafficTrapInterval OBJECT-TYPE
SYNTAX Integer32 (1..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval of traffic-info notification appliled currently."
::= { qtech3GDeviceManagementEntry 40 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.41
qtech3GRssiThreshold OBJECT-TYPE
SYNTAX Integer32 (-150..0)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the threshold value of rssi notification appliled currently."
::= { qtech3GDeviceManagementEntry 41 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.42
qtech3GTrapFilterMode OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of the trap filter function appliled currently."
::= { qtech3GDeviceManagementEntry 42 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.43
qtech3GISPtimeout OBJECT-TYPE
SYNTAX Integer32 (1..36000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout parameter of trap filter function appliled currently."
::= { qtech3GDeviceManagementEntry 43 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.44
qtech3GEncrypt_type OBJECT-TYPE
SYNTAX INTEGER
{
ENCRYPT_NONE(0),
ENCRYPT_TEMP(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Encrypt type appliled currently."
::= { qtech3GDeviceManagementEntry 44 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.1.6.1.45
qtech3GPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password appliled currently."
::= { qtech3GDeviceManagementEntry 45 }
-- ===============================================
-- ADD new qtech3GTrapObject.
-- ===============================================
qtech3GTrapNew OBJECT IDENTIFIER ::= { qtech3GMonitor 2 }
qtech3GNotificationsNew OBJECT IDENTIFIER ::= { qtech3GTrapNew 1 }
qtech3GLineDetectedNotification NOTIFICATION-TYPE
OBJECTS {
qtech3GRouterSN,
qtech3GCardIMSI,
qtech3GIntfIPAddr,
qtech3GLineDetected,
qtech3GLineDetectedResult,
qtech3GLineDetectedMainCause,
qtech3GLineDetectedSubCause,
qtech3GDeviceBackupInfo,
qtech3GRssiStrength,
qtech3GDeviceBackupIMSI
}
STATUS current
DESCRIPTION
"This notification is generated when user detecting 3g line."
::= { qtech3GNotificationsNew 1 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.2.1.2
qtech3GUserUpLine NOTIFICATION-TYPE
OBJECTS {
qtech3GRouterSlotNumber,
qtech3GCardIMSI,
qtech3GIntfIPAddr,
qtech3GTrafficPreventListName,
qtech3GTrafficPreventListID,
qtech3GTrafficPreventIfIndex,
qtech3GTrafficPreventMode,
qtech3GPppUsername,
qtech3GRouterSN,
qtech3GCardPhoneNumber,
qtech3GDailMode,
qtech3GDialOnDemandIfIndex,
qtech3GDeviceModemType
}
STATUS current
DESCRIPTION
"This notification is generated when 4G user up line."
::= { qtech3GNotificationsNew 2 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.2.1.3
qtech3GUserDownLine NOTIFICATION-TYPE
OBJECTS {
qtech3GRouterSlotNumber,
qtech3GCardIMSI,
qtech3GIntfIPAddr,
qtech3GTrafficPreventListName,
qtech3GTrafficPreventListID,
qtech3GTrafficPreventIfIndex,
qtech3GTrafficPreventMode,
qtech3GPppUsername, qtech3GRouterSN,
qtech3GCardPhoneNumber,
qtech3GDailMode,
qtech3GDialOnDemandIfIndex,
qtech3GDeviceModemType }
STATUS current
DESCRIPTION
"This notification is generated when 4G user down line."
::= { qtech3GNotificationsNew 3 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.2.1.4
qtech3GRssiNotification NOTIFICATION-TYPE
OBJECTS {
qtech3GRouterSlotNumber,
qtech3GCardIMSI,
qtech3GRouterSN,
qtech3GIntfIPAddr,
qtech3GRssiStrengthPercent,
qtech3GRssiStrength,
qtech3GDeviceModemType
}
STATUS current
DESCRIPTION
"This notification is generated when 4G signal is lower
than the specific threshold value."
::= { qtech3GNotificationsNew 4 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.2.1.5
qtech3GTrafficInfoNotification NOTIFICATION-TYPE
OBJECTS {
qtech3GRouterSlotNumber,
qtech3GCardIMSI,
qtech3GRouterSN,
qtech3GIntfIPAddr,
qtech3GOutOctets,
qtech3GInOctets,
qtech3GDeviceModemType,
qtech3GLineCardType,
qtech3GModemIMEI,
qtech3GCardPhoneNumber,
qtech3GDeviceBackupInfo,
qtech3GRssiStrength,
qtech3GRssiStrengthPercent,
qtech3GNetworkISPMode,
qtech3GNetworkSysMode,
qtech3GSIMCardStatus,
qtech3GDailMode,
qtech3GPppUsername,
qtech3GUserActiveTime,
qtech3GAcessBSCellID,
qtech3GAcessBSLAC,
qtech3GAcessBSLONG,
qtech3GAcessBSLAT,
qtech3GInSpeed,
qtech3GOutSpeed,
qtech3G2ifIndex,
qtech3GTrafficTrapInterval,
qtech3GRssiThreshold,
qtech3GTrapFilterMode,
qtech3GISPtimeout
}
STATUS current
DESCRIPTION
"This notification is used for reporting the traffic information of 4G user regularly. "
::= { qtech3GNotificationsNew 5 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.2.1.6
qtech3GBackupMaster NOTIFICATION-TYPE
OBJECTS {
qtech3GRouterSlotNumber,
qtech3GCardIMSI,
qtech3GIntfIPAddr,
qtech3GTrafficPreventListName,
qtech3GTrafficPreventListID,
qtech3GTrafficPreventIfIndex,
qtech3GTrafficPreventMode,
qtech3GPppUsername,
qtech3GRouterSN,
qtech3GCardPhoneNumber,
qtech3GDailMode,
qtech3GDialOnDemandIfIndex,
qtech3GDeviceModemType
}
STATUS current
DESCRIPTION
"This notification is generated when 4G is switching to master line."
::= { qtech3GNotificationsNew 6 }
-- 1.3.6.1.4.1.27514.1.1.10.2.95.2.1.7
qtech3GBackupSlave NOTIFICATION-TYPE
OBJECTS {
qtech3GRouterSlotNumber,
qtech3GCardIMSI,
qtech3GIntfIPAddr,
qtech3GTrafficPreventListName,
qtech3GTrafficPreventListID,
qtech3GTrafficPreventIfIndex,
qtech3GTrafficPreventMode,
qtech3GPppUsername,
qtech3GRouterSN,
qtech3GCardPhoneNumber,
qtech3GDailMode,
qtech3GDialOnDemandIfIndex,
qtech3GDeviceModemType }
STATUS current
DESCRIPTION
"This notification is generated when 4G is switching to slave line."
::= { qtech3GNotificationsNew 7 }
END
--
-- QTECH-3G-MIB.mib
--
View Git Blame Copy Permalink