982 lines
36 KiB
Plaintext
982 lines
36 KiB
Plaintext
ONEACCESS-ETHOAM-EXT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Integer32,
|
|
Counter32,
|
|
Gauge32,
|
|
Unsigned32 FROM SNMPv2-SMI -- [RFC2578]
|
|
RowStatus,
|
|
TruthValue, MacAddress,
|
|
TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC -- [RFC2579]
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF -- [RFC2580]
|
|
InterfaceIndex
|
|
FROM IF-MIB -- [RFC2863]
|
|
VlanIdOrNone FROM Q-BRIDGE-MIB
|
|
Dot1agCfmCcmInterval FROM IEEE8021-CFM-MIB
|
|
--cfm types
|
|
Dot1agCfmMhfCreation,
|
|
Dot1agCfmIdPermission,
|
|
Dot1agCfmMDLevel,
|
|
Dot1agCfmMpDirection,
|
|
Dot1agCfmMepIdOrZero,
|
|
Dot1agCfmMDLevelOrNone,
|
|
Dot1agCfmConfigErrors,
|
|
dot1agCfmMepIdentifier,
|
|
-- cfm indexes
|
|
dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
--cfm groups
|
|
dot1agCfmStack,
|
|
dot1agCfmDefaultMd,
|
|
dot1agCfmVlan,
|
|
dot1agCfmConfigErrorList,
|
|
dot1agCfmMa,
|
|
dot1agCfmMepEntry,
|
|
-- cfm row items
|
|
dot1agCfmMepLbrBadMsdu,
|
|
dot1agCfmMdRowStatus,
|
|
dot1agCfmMaNetRowStatus,
|
|
dot1agCfmMaMepListRowStatus,
|
|
dot1agCfmMepRowStatus
|
|
FROM IEEE8021-CFM-MIB
|
|
|
|
oacExpIMEthernet, oacMIBModules
|
|
FROM ONEACCESS-GLOBAL-REG
|
|
;
|
|
|
|
|
|
oacEthOamExtMib MODULE-IDENTITY
|
|
LAST-UPDATED "201107290000Z"
|
|
ORGANIZATION " OneAccess "
|
|
CONTACT-INFO
|
|
"Pascal KESTELOOT
|
|
Postal: ONE ACCESS
|
|
381 Avenue du Général de Gaulle
|
|
92140 Clamart, France
|
|
FRANCE
|
|
|
|
Tel: (+33) 01 41 87 70 00
|
|
Fax: (+33) 01 41 87 74 00
|
|
|
|
E-mail: pascal.kesteloot@oneaccess-net.com"
|
|
|
|
DESCRIPTION
|
|
"fixed compilation issues"
|
|
REVISION "201107290000Z"
|
|
|
|
DESCRIPTION
|
|
"Contact updated"
|
|
REVISION "201106150000Z"
|
|
|
|
DESCRIPTION
|
|
"A MIB module for extending the IEEE8021-CFM-MIB
|
|
and IEEE8021-CFM-V2-MIB to add objects which provide
|
|
additional information about Connectivity Fault
|
|
management(CFM) not available in IEEE8021-CFM-MIB and
|
|
IEEE8021-CFM-V2-MIB and addition of ITU-T Y.1731 functionality
|
|
|
|
This module also introduces the Service Layer OAM objects
|
|
described in the ITU-T Y.1731 standard.
|
|
Main additions :
|
|
|
|
- a table for defining Maintenance Intermediate Points (MIP)
|
|
- Y.1731 frame loss and frame delay functionality
|
|
- Y.1731 AIS/RDI functionality"
|
|
|
|
-- Revision history
|
|
|
|
|
|
REVISION "201101050001Z"
|
|
DESCRIPTION "Cleaned up version, adapted to latest needs"
|
|
|
|
REVISION "201008120001Z"
|
|
DESCRIPTION "Initial version of this MIB module."
|
|
|
|
::= { oacMIBModules 689 }
|
|
|
|
-- ******************************************************************
|
|
-- Textual conventions
|
|
-- ******************************************************************
|
|
|
|
EthOamExtMipMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CFM standard to which the MIP adheres."
|
|
REFERENCE
|
|
" "
|
|
SYNTAX INTEGER {
|
|
modey1731 (1),
|
|
mode8021ag (2)
|
|
}
|
|
|
|
EthOamExtMepMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CFM standard to which the MEP adheres."
|
|
REFERENCE
|
|
" "
|
|
SYNTAX INTEGER {
|
|
modey1731 (1),
|
|
mode8021ag (2),
|
|
modehybrid (3)
|
|
}
|
|
|
|
EthOamEfdState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Possible EFD states that an interface can reside in. The value can be
|
|
one of the following:
|
|
|
|
efdDisabled (1) The EFD feature is disabled;
|
|
efdIdle (2) The EFD feature is enabled, and there is no
|
|
error condition on the interface;
|
|
efdTriggered (3) The EFD feature is enabled, and there is an
|
|
error condition on the interface;
|
|
"
|
|
REFERENCE
|
|
" "
|
|
SYNTAX INTEGER {
|
|
efdDisabled (1),
|
|
efdIdle (2),
|
|
efdTriggered (3)
|
|
}
|
|
|
|
-- *******************************************************************
|
|
-- Groups in the MIB Module
|
|
-- ******************************************************************
|
|
|
|
oacEthOamExtMIBObjects OBJECT IDENTIFIER ::= { oacExpIMEthernet 2 }
|
|
|
|
oacEthOamExtIfObjects OBJECT IDENTIFIER ::= { oacEthOamExtMIBObjects 1 }
|
|
|
|
oacEthOamExtGlobal OBJECT IDENTIFIER ::= { oacEthOamExtIfObjects 3 }
|
|
|
|
oacEthOamExtEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object enables or disables the CFM feature
|
|
of the local device. When the object is 'true',
|
|
CFM feature is enabled. When the object is 'false',
|
|
CFM feature is disabled."
|
|
::= { oacEthOamExtGlobal 1 }
|
|
|
|
-- *******************************************************************
|
|
-- oacEthOamExtMipTable
|
|
-- ******************************************************************
|
|
|
|
oacEthOamExtMipTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OacEthOamExtMipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains a list of Maintenance domain
|
|
Intermediate Points.
|
|
|
|
This table manages MIPs which are created by rules
|
|
specified on the Maintenance Association (MA) and
|
|
Maintenance Domain (MD) on the local device. MIPs can
|
|
also be created by rules specified on Default MD Level,
|
|
which is covered by dot1agCfmDefaultMdTable in
|
|
IEEE8021-CFM-MIB."
|
|
::= { oacEthOamExtIfObjects 1 }
|
|
|
|
oacEthOamExtMipEntry OBJECT-TYPE
|
|
SYNTAX OacEthOamExtMipEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing configuration of a particular MIP.
|
|
Each row in the table represents a different MIP. "
|
|
INDEX {
|
|
oacEthOamMipIfIndex,
|
|
oacEthOamMipMegLevel,
|
|
oacEthOamMipVlanIndex
|
|
}
|
|
::= { oacEthOamExtMipTable 1 }
|
|
|
|
OacEthOamExtMipEntry ::= SEQUENCE {
|
|
oacEthOamMipIfIndex InterfaceIndex,
|
|
oacEthOamMipMegLevel Unsigned32,
|
|
oacEthOamMipVlanIndex VlanIdOrNone,
|
|
oacEthOamMipMode EthOamExtMipMode,
|
|
oacEthOamMipRowStatus RowStatus
|
|
}
|
|
|
|
oacEthOamMipIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the interface index of the interface either a
|
|
bridge port, or an aggregated IEEE 802.1 link within a bridge
|
|
port, to which the MIP is attached.
|
|
Upon a restart of the system, the system SHALL, if necessary,
|
|
change the value of this variable so that it indexes the
|
|
entry in the interface table with the same value of ifAlias
|
|
that it indexed before the system restart. If no such
|
|
entry exists, then the system SHALL set this variable to 0.
|
|
"
|
|
::= { oacEthOamExtMipEntry 1 }
|
|
|
|
oacEthOamMipMegLevel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEG level of the MIP."
|
|
::= { oacEthOamExtMipEntry 2 }
|
|
|
|
oacEthOamMipVlanIndex OBJECT-TYPE
|
|
SYNTAX VlanIdOrNone
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VID associated with the MIP."
|
|
::= { oacEthOamExtMipEntry 3 }
|
|
|
|
oacEthOamMipMode OBJECT-TYPE
|
|
SYNTAX EthOamExtMipMode
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MIP mode. The possible values are:
|
|
|
|
- modey1731 (1) The MIP functions according to the Y.1731 standard
|
|
- mode802dot1ag (2) The MIP functions according to the IEEE 802.1ag
|
|
standard
|
|
|
|
The default value is 'modey1731'.
|
|
"
|
|
DEFVAL { modey1731 }
|
|
::= { oacEthOamExtMipEntry 4 }
|
|
|
|
oacEthOamMipRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the row.
|
|
|
|
The writable columns in a row can not be changed if the row
|
|
is active. All columns MUST have a valid value before a row
|
|
can be activated.
|
|
"
|
|
::= { oacEthOamExtMipEntry 5 }
|
|
|
|
-- *******************************************************************
|
|
-- oacEthOamExtMepTable
|
|
-- ******************************************************************
|
|
|
|
oacEthOamExtMepTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OacEthOamExtMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Extended MEP table stores all the managed objects for
|
|
setting the CFM standard of the MEP (Y1731, dot1ag, or hybrid), for
|
|
sending LMM/DMM, for enabling transmission of RDI and AIS, for
|
|
enabling EFD functionality, and for controlling Multicast Loopbacks.
|
|
It is an extension of the standard MEP table.
|
|
(AUGMENT - it uses the same indexes as the standard MEP table
|
|
dot1agCfmMepTable)
|
|
|
|
*LMM Managed objects
|
|
|
|
LMM Managed objects in the extended MEP table enable the management
|
|
entity to initiate transmission of Frame Loss messages. It will signal
|
|
the MEP that it should start to transmit Frame Loss messages (LMM)
|
|
and retrieve the information received from the Frame Loss
|
|
Responses (LMR).
|
|
|
|
Steps to use entries in this table:
|
|
|
|
1) Wait for oacEthOamMepLossStatus value to be
|
|
false. To do this do this sequence:
|
|
a. an SNMP GET for both SnmpSetSerialNo and
|
|
oacEthOamMepLossStatus objects (in same SNMP
|
|
PDU).
|
|
b. Check if value for oacEthOamMepLossStatus is false.
|
|
- if not, wait x seconds, go to step a above.
|
|
- if yes, save the value of SnmpSetSerialNo and go
|
|
to step 2) below
|
|
2) Change oacEthOamMepLossStatus value from false to
|
|
true to ensure no other management entity will use
|
|
the service. In order to not disturb a possible other NMS
|
|
do this by sending an SNMP SET for both SnmpSetSerialNo
|
|
and oacEthOamMepLossStatus objects (in same SNMP
|
|
PDU, and make sure SNmpSetSerialNo is the first varBind).
|
|
For the SnmpSetSerialNo varBind, use the value that you
|
|
obtained in step 1)a. This ensures that two cooperating
|
|
NMSes will not step on each others toes.
|
|
3) Setup the different data to be sent (destination, priority,
|
|
interval,...), except do not set oacEthOamMepLossMessagesStart.
|
|
4) Set oacEthOamMepLossMessagesStart to true to initiate
|
|
transmission of Frame Loss messages.
|
|
5) Check the value of oacEthOamMepLossResultOK to
|
|
find out if the operation was successfully initiated or
|
|
not.
|
|
6) The results of the running test can be retrieved from
|
|
oacEthOamMepLossNbrOfTxFrames, oacEthOamMepLossNbrOfRxFrames,
|
|
oacEthOamMepLossReplyLoss, oacEthOamMepLossNearEndDrops and
|
|
oacEthOamMepLossFarEndDrops.
|
|
7) If you so desire, you can periodically stop and/or restart
|
|
transmission of LMM messages by modifying the
|
|
oacEthOamMepLossMessagesStart accordingly.
|
|
8) Change the oacEthOamMepLossStatus value back to
|
|
false to allow other management entities to use the
|
|
table. Setting oacEthOamMepLossStatus to false obviously implies
|
|
that LMMs will no longer be transmitted, and that as such the value
|
|
of oacEthOamMepLossMessagesStart will be ignored.
|
|
|
|
*DMM Managed objects
|
|
|
|
The DMM Managed objects in the extended MEP table are used in a manner
|
|
similar to that described for LMM transmission, above. Upon
|
|
successfully initiating the transmission, the objects
|
|
oacEthOamMepDelayNbrOfTxFrames, oacEthOamMepDelayNbrOfRxFrames,
|
|
oacEthOamMepDelayLoss, oacEthOamMepDelayMin, oacEthOamMepDelayMax,
|
|
oacEthOamMepDelayAvrg, oacEthOamMepDelayJitterNegMax,
|
|
oacEthOamMepDelayJitterAvrgMax, oacEthOamMepDelayJitterPosMax
|
|
contain the result of the test.
|
|
|
|
*AIS managed objects
|
|
|
|
The AIS managed objects in the extended MEP table are used in a manner
|
|
similar to that described for LMM transmission. In short, first all
|
|
managed objects except oacEthOamMepAisTxEnable must be set, then
|
|
oacEthOamMepAisTxEnable must be set to true to enable transmission of
|
|
AIS. Set it to false to disable transmission again.
|
|
|
|
*Multicast Loopbacks
|
|
|
|
The Multicast Loopback managed objects are used as follows. If wanted,
|
|
the SNMP manager first sets the oacEthOamMepMcastLbmDataTlv payload,
|
|
or makes sure that the string is empty if no DataTLV is wanted.
|
|
Next, the SNMP manager must wait for the oacEthOamMepMcastLbmStatus
|
|
flag to be false.
|
|
Then, the oacEthOamMepMcastLbmStatus flag must be set to true to
|
|
initiate transmission of the Multicast LBM. Then the SNMP manager must
|
|
wait until the MEP Multicast Loopback Initiator State Machine has set
|
|
this flag back to false, which indicates that the time to wait for
|
|
loopback replies has expired. Finally, the oacEthOamLbrNotRespTable and
|
|
oacEthOamExtLbrTable tables can be consulted to evaluate the results.
|
|
|
|
*EFD Managed Objects
|
|
|
|
CFM could be considered as a line protocol for controlling Ethernet
|
|
interfaces. In case of Loss of Continuity or AIS or RDI reception,
|
|
the interface can be disabled. This feature is called Ethernet Fault
|
|
Detection and Propagation, or EFD. It is only available for inward
|
|
facing MEPs. When the interface, to which the inward facing MEP
|
|
belongs, is disabled, the MEP stays up and CFM frames are still
|
|
flowing. When the defect disappears, EFD will bring the MEP's interface
|
|
up again.
|
|
|
|
EFD can be enabled with the oacEthOamMepEfdEnable managed object. If
|
|
more than one inward facing MEP is configured for a specific interface,
|
|
then EFD can only be enabled on one of these MEPs.
|
|
|
|
Once enabled, the EFD state of the interface can be retrieved from the
|
|
oacEthOamMepEfdState managed object. In case EFD is triggered, object
|
|
dot1agCfmMepDefects from the IEEE8021-CFM-MIB MIB can be used to
|
|
further investigate the cause(s) of the EFD trigger.
|
|
"
|
|
::= { oacEthOamExtIfObjects 2 }
|
|
|
|
oacEthOamExtMepEntry OBJECT-TYPE
|
|
SYNTAX OacEthOamExtMepEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEP table entry"
|
|
AUGMENTS {dot1agCfmMepEntry }
|
|
::= { oacEthOamExtMepTable 1 }
|
|
|
|
OacEthOamExtMepEntry ::= SEQUENCE {
|
|
oacEthOamMepMode EthOamExtMepMode,
|
|
oacEthOamMepLossDestMacAddress MacAddress,
|
|
oacEthOamMepLossDestMepId Dot1agCfmMepIdOrZero,
|
|
oacEthOamMepLossDestIsMepId TruthValue,
|
|
oacEthOamMepLossVlanPriority Unsigned32,
|
|
oacEthOamMepLossInterval Dot1agCfmCcmInterval,
|
|
oacEthOamMepLossStatus TruthValue,
|
|
oacEthOamMepLossMessagesStart TruthValue,
|
|
oacEthOamMepLossResultOK TruthValue,
|
|
oacEthOamMepLossNbrOfTxFrames Counter32,
|
|
oacEthOamMepLossNbrOfRxFrames Counter32,
|
|
oacEthOamMepLossReplyLoss Counter32,
|
|
oacEthOamMepLossNearEndDrops Counter32,
|
|
oacEthOamMepLossFarEndDrops Counter32,
|
|
oacEthOamMepDelayDestMacAddress MacAddress,
|
|
oacEthOamMepDelayDestMepId Dot1agCfmMepIdOrZero,
|
|
oacEthOamMepDelayDestIsMepId TruthValue,
|
|
oacEthOamMepDelayVlanPriority Unsigned32,
|
|
oacEthOamMepDelayInterval Dot1agCfmCcmInterval,
|
|
oacEthOamMepDelayStatus TruthValue,
|
|
oacEthOamMepDelayTimeOut Unsigned32,
|
|
oacEthOamMepDelayMessagesStart TruthValue,
|
|
oacEthOamMepDelayResultOK TruthValue,
|
|
oacEthOamMepDelayNbrOfTxFrames Counter32,
|
|
oacEthOamMepDelayNbrOfRxFrames Counter32,
|
|
oacEthOamMepDelayLoss Counter32,
|
|
oacEthOamMepDelayMin Unsigned32,
|
|
oacEthOamMepDelayMax Unsigned32,
|
|
oacEthOamMepDelayAvrg Unsigned32,
|
|
oacEthOamMepDelayJitterNegMax Unsigned32,
|
|
oacEthOamMepDelayJitterAvrgMax Unsigned32,
|
|
oacEthOamMepDelayJitterPosMax Unsigned32,
|
|
oacEthOamMepRdiTxEnable TruthValue,
|
|
oacEthOamMepMcastLbmStatus TruthValue,
|
|
oacEthOamMepMcastLbmResult TruthValue,
|
|
oacEthOamMepMcastLbmSeqNumber Unsigned32,
|
|
oacEthOamMepMcastLbmDataTlv OCTET STRING,
|
|
oacEthOamMepAisInterval Unsigned32,
|
|
oacEthOamMepAisVlanPriority Unsigned32,
|
|
oacEthOamMepAisTxEnable TruthValue,
|
|
oacEthOamMepAisClientMegLevel Unsigned32,
|
|
oacEthOamMepEfdEnable TruthValue,
|
|
oacEthOamMepEfdState EthOamEfdState
|
|
}
|
|
|
|
oacEthOamMepMode OBJECT-TYPE
|
|
SYNTAX EthOamExtMepMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The standard the MEP is following. The possible values are:
|
|
|
|
- modey1731 (1) The MEP functions according to the Y.1731
|
|
standard
|
|
- mode802dot1ag (2) The MEP functions according to the IEEE 802.1ag
|
|
standard
|
|
- modehybrid (3) MEP functions according to the IEEE 802.1ag
|
|
standard, but also supports the delay and loss
|
|
functionality of the Y.1731 standard
|
|
|
|
The default mode is 'modehybrid'.
|
|
"
|
|
DEFVAL { modehybrid }
|
|
::= { oacEthOamExtMepEntry 1 }
|
|
|
|
oacEthOamMepLossDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted: A unicast destination
|
|
MAC address. This address will be used if the value of the column
|
|
oacCfmMepLossDestIsMepId is 'false'."
|
|
::= { oacEthOamExtMepEntry 10 }
|
|
|
|
oacEthOamMepLossDestMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance association End Point Identifier of another MEP in the
|
|
same Maintenance Association to which the LMM is to be sent. This
|
|
address will be used if the value of the column oacCfmMepLossDestIsMepId
|
|
is 'true'."
|
|
::= { oacEthOamExtMepEntry 11 }
|
|
|
|
oacEthOamMepLossDestIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MEPID of the target MEP is used for FrameLoss
|
|
transmission.
|
|
False indicates that unicast destination MAC address of the target MEP
|
|
is used for FrameLoss transmission."
|
|
::= { oacEthOamExtMepEntry 12 }
|
|
|
|
oacEthOamMepLossVlanPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority. 3 bit value to be used in the VLAN tag, if present in the
|
|
transmitted frame."
|
|
::= { oacEthOamExtMepEntry 13 }
|
|
|
|
oacEthOamMepLossInterval OBJECT-TYPE
|
|
SYNTAX Dot1agCfmCcmInterval
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval between LMM transmissions."
|
|
DEFVAL { interval1s }
|
|
::= { oacEthOamExtMepEntry 14 }
|
|
|
|
oacEthOamMepLossStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by the MEP Loopback Initiator State
|
|
Machine or an MIB manager to indicate that LMM messages are going to be
|
|
transmitted or are already being transmitted.
|
|
Reset to false by the MEP Loopback Initiator State Machine or the same
|
|
MIB manager."
|
|
DEFVAL { false }
|
|
::= { oacEthOamExtMepEntry 15 }
|
|
|
|
oacEthOamMepLossMessagesStart OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by an MIB manager to start LMM
|
|
transmission, or set to false by an MIB manager to stop LMM
|
|
transmission."
|
|
::= { oacEthOamExtMepEntry 16 }
|
|
|
|
oacEthOamMepLossResultOK OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
- true The FrameDelay Message(s) will be sent.
|
|
- false The FrameDelay Message(s) will not be sent."
|
|
::= { oacEthOamExtMepEntry 17 }
|
|
|
|
oacEthOamMepLossNbrOfTxFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sent LMM frames."
|
|
::= { oacEthOamExtMepEntry 18 }
|
|
|
|
oacEthOamMepLossNbrOfRxFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received LMR frames."
|
|
::= { oacEthOamExtMepEntry 19 }
|
|
|
|
oacEthOamMepLossReplyLoss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Difference between the number of sent LMMs and the number of received
|
|
LMRs."
|
|
::= { oacEthOamExtMepEntry 20 }
|
|
|
|
oacEthOamMepLossNearEndDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of in-profile data frames dropped on the interface on which the
|
|
local MEP is defined, sent by the remote MEP, excluding OAM frames at
|
|
the MEP's MEG level."
|
|
::= { oacEthOamExtMepEntry 21 }
|
|
|
|
oacEthOamMepLossFarEndDrops OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of in-profile data frames dropped on the interface on which the
|
|
remote MEP is defined, sent by the local MEP, excluding OAM frames at
|
|
the MEP's MEG level."
|
|
::= { oacEthOamExtMepEntry 22 }
|
|
|
|
oacEthOamMepDelayDestMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Target MAC Address Field to be transmitted: A unicast destination
|
|
MAC address. This address will be used if the value of the column
|
|
oacCfmMepDelayDestIsMepId is 'false'."
|
|
::= { oacEthOamExtMepEntry 30 }
|
|
|
|
oacEthOamMepDelayDestMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Maintenance association End Point Identifier of another MEP in the
|
|
same Maintenance Association to which the DMM is to be sent. This
|
|
address will be used if the value of the column
|
|
oacCfmMepLossDestIsMepId is 'true'."
|
|
::= { oacEthOamExtMepEntry 31 }
|
|
|
|
oacEthOamMepDelayDestIsMepId OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"True indicates that MEPID of the target MEP is used for FrameDelay
|
|
transmission.
|
|
False indicates that unicast destination MAC address of the target MEP
|
|
is used for FrameDelay transmission."
|
|
::= { oacEthOamExtMepEntry 32 }
|
|
|
|
oacEthOamMepDelayVlanPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority. 3 bit value to be used in the VLAN tag, if present in the
|
|
transmitted frame."
|
|
::= { oacEthOamExtMepEntry 33 }
|
|
|
|
oacEthOamMepDelayInterval OBJECT-TYPE
|
|
SYNTAX Dot1agCfmCcmInterval
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval between DMM transmissions."
|
|
DEFVAL { interval1s }
|
|
::= { oacEthOamExtMepEntry 34 }
|
|
|
|
oacEthOamMepDelayStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by the MEP Loopback Initiator State
|
|
Machine or an MIB manager to indicate that DMM messages are going to be
|
|
transmitted or are already being transmitted.
|
|
Reset to false by the MEP Loopback Initiator State Machine or the same
|
|
MIB manager."
|
|
DEFVAL { false }
|
|
::= { oacEthOamExtMepEntry 35 }
|
|
|
|
oacEthOamMepDelayTimeOut OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time to wait for a FrameDelay response, before considering it lost,
|
|
expressed in multiples of 100msec."
|
|
::= { oacEthOamExtMepEntry 36 }
|
|
|
|
oacEthOamMepDelayMessagesStart OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by an MIB manager to start DMM
|
|
transmission, or set to false by an MIB manager to stop DMM
|
|
transmission."
|
|
::= { oacEthOamExtMepEntry 37 }
|
|
|
|
oacEthOamMepDelayResultOK OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
- true The FrameLoss Message(s) will be sent.
|
|
- false The FrameLoss Message(s) will not be sent."
|
|
::= { oacEthOamExtMepEntry 38 }
|
|
|
|
oacEthOamMepDelayNbrOfTxFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of sent DMM frames."
|
|
::= { oacEthOamExtMepEntry 39 }
|
|
|
|
oacEthOamMepDelayNbrOfRxFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of received DMR frames."
|
|
::= { oacEthOamExtMepEntry 40 }
|
|
|
|
oacEthOamMepDelayLoss OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Difference between the number of sent DMMs and the number of received
|
|
DMRs within the delay window (size = 10)."
|
|
::= { oacEthOamExtMepEntry 41 }
|
|
|
|
oacEthOamMepDelayMin OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum delay that was measured in the Delay test, expressed in
|
|
milliseconds."
|
|
::= { oacEthOamExtMepEntry 42 }
|
|
|
|
oacEthOamMepDelayMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum delay that was measured in the Delay test, expressed in
|
|
milliseconds."
|
|
::= { oacEthOamExtMepEntry 43 }
|
|
|
|
oacEthOamMepDelayAvrg OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The average delay that was measured in the Delay test, expressed in
|
|
milliseconds."
|
|
::= { oacEthOamExtMepEntry 44 }
|
|
|
|
oacEthOamMepDelayJitterNegMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum negative jitter deviation that was measured in the Delay
|
|
test, expressed in milliseconds."
|
|
::= { oacEthOamExtMepEntry 45 }
|
|
|
|
oacEthOamMepDelayJitterAvrgMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum average jitter that was measured in the Delay test,
|
|
expressed in milliseconds."
|
|
::= { oacEthOamExtMepEntry 46 }
|
|
|
|
oacEthOamMepDelayJitterPosMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum positive jitter deviation that was measured in the Delay
|
|
test, expressed in milliseconds."
|
|
::= { oacEthOamExtMepEntry 47 }
|
|
|
|
oacEthOamMepRdiTxEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the transmission of RDI frames. Since RDI is a bit in the CCM
|
|
frames, this setting is only taken into account if the transmission
|
|
of CC messages is enabled."
|
|
::= { oacEthOamExtMepEntry 60 }
|
|
|
|
oacEthOamMepMcastLbmStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Boolean flag set to true by the MEP Multicast Loopback Initiator State
|
|
Machine or an MIB manager to start transmission of a single multicast
|
|
Loopback message.
|
|
Reset to false by the MEP Multicast Loopback Initiator State Machine
|
|
once the timeframe to wait for replies has expired."
|
|
::= { oacEthOamExtMepEntry 70 }
|
|
|
|
oacEthOamMepMcastLbmResult OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the result of the operation:
|
|
- true The multicast Loopback Message(s) will be (or has been)
|
|
sent
|
|
- false The multicast Loopback Message(s) will not be sent."
|
|
::= { oacEthOamExtMepEntry 71 }
|
|
|
|
oacEthOamMepMcastLbmSeqNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast Loopback Transaction Identifier of the next multicast
|
|
LBM (to be) sent.
|
|
This sequence number can be zero because it wraps around.
|
|
The value returned is undefined if oacEthOamMepMcastLbmResult is false."
|
|
::= { oacEthOamExtMepEntry 72 }
|
|
|
|
oacEthOamMepMcastLbmDataTlv OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary amount of data to be included in the Data TLV of the
|
|
Multicast Loopback message. When set to a zero length string, the
|
|
dataTlv part of the message is omitted."
|
|
::= { oacEthOamExtMepEntry 73 }
|
|
|
|
oacEthOamMepAisInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval between AIS transmissions."
|
|
::= { oacEthOamExtMepEntry 80 }
|
|
|
|
oacEthOamMepAisVlanPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority. 3 bit value to be used in the VLAN tag, if present in the
|
|
transmitted AIS frame."
|
|
::= { oacEthOamExtMepEntry 81 }
|
|
|
|
oacEthOamMepAisTxEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the transmission of AIS frames."
|
|
::= { oacEthOamExtMepEntry 82 }
|
|
|
|
oacEthOamMepAisClientMegLevel OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maintenance level on which the AIS frames will be sent."
|
|
::= { oacEthOamExtMepEntry 83 }
|
|
|
|
oacEthOamMepEfdEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables Ethernet Fault Detection & propagation."
|
|
::= { oacEthOamExtMepEntry 90 }
|
|
|
|
oacEthOamMepEfdState OBJECT-TYPE
|
|
SYNTAX EthOamEfdState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The EFD state of the interface that this MEP belongs to."
|
|
::= { oacEthOamExtMepEntry 91 }
|
|
|
|
-- *******************************************************************
|
|
-- oacEthOamExtLbrTable
|
|
-- ******************************************************************
|
|
|
|
oacEthOamExtLbrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OacEthOamExtLbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast Loopback reply table, a list of all received replies."
|
|
::= { oacEthOamExtIfObjects 4 }
|
|
|
|
oacEthOamExtLbrEntry OBJECT-TYPE
|
|
SYNTAX OacEthOamExtLbrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing configuration of a particular LBR.
|
|
Each row in the table represents a different LBR"
|
|
INDEX {
|
|
dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMepIdentifier,
|
|
oacEthOamLbrReceiveOrder
|
|
}
|
|
|
|
::= { oacEthOamExtLbrTable 1 }
|
|
|
|
OacEthOamExtLbrEntry ::= SEQUENCE {
|
|
oacEthOamLbrReceiveOrder Unsigned32,
|
|
oacEthOamLbrPeerMacAddress MacAddress,
|
|
oacEthOamLbrMepId Dot1agCfmMepIdOrZero
|
|
}
|
|
|
|
oacEthOamLbrReceiveOrder OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to distinguish among multiple LBRs with the same LBR
|
|
Transaction Identifier field value. oacEthOamLbrReceiveOrder
|
|
are assigned sequentially from 1, in the order that the
|
|
Loopback Initiator received the LBRs."
|
|
::= { oacEthOamExtLbrEntry 1 }
|
|
|
|
oacEthOamLbrPeerMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unicast MAC address of the MEP that replied."
|
|
::= { oacEthOamExtLbrEntry 2 }
|
|
|
|
oacEthOamLbrMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the MEP ID can be resolved, the MEPID, else 0."
|
|
::= { oacEthOamExtLbrEntry 3 }
|
|
|
|
-- *******************************************************************
|
|
-- oacEthOamLbrNotRespTable
|
|
-- ******************************************************************
|
|
|
|
oacEthOamLbrNotRespTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OacEthOamLbrNotRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table containing a list of all known peer MEPs which have not
|
|
responded to the multicast Loopback Message."
|
|
::= { oacEthOamExtIfObjects 5 }
|
|
|
|
oacEthOamLbrNotRespEntry OBJECT-TYPE
|
|
SYNTAX OacEthOamLbrNotRespEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry containing configuration of a particular MEP.
|
|
Each row in the table represents a different MEP`"
|
|
INDEX {
|
|
dot1agCfmMdIndex,
|
|
dot1agCfmMaIndex,
|
|
dot1agCfmMepIdentifier,
|
|
oacEthOamLbrNotRespMepId
|
|
}
|
|
|
|
::= { oacEthOamLbrNotRespTable 1 }
|
|
|
|
OacEthOamLbrNotRespEntry ::= SEQUENCE {
|
|
oacEthOamLbrNotRespMepId Dot1agCfmMepIdOrZero,
|
|
oacEthOamLbrNotRespPeerMacAddress MacAddress
|
|
}
|
|
|
|
oacEthOamLbrNotRespMepId OBJECT-TYPE
|
|
SYNTAX Dot1agCfmMepIdOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MEP ID of the known peer MEP that did not reply."
|
|
::= { oacEthOamLbrNotRespEntry 1 }
|
|
|
|
oacEthOamLbrNotRespPeerMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unicast MAC address of the known peer MEP that has not replied."
|
|
::= { oacEthOamLbrNotRespEntry 2 }
|
|
|
|
END
|