WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/nec/IPE-SYSTEM-MIB

5940 lines
216 KiB
Plaintext
Raw Blame History

--
-- ASN.1 MIB Definitions
-- Output Date: Tue Jul 12 15:00:32 2016
--
IPE-SYSTEM-MIB DEFINITIONS ::= BEGIN
-----------------------------------------------
-- IMPORTS Definitions
-----------------------------------------------
IMPORTS
BridgeId, Timeout
FROM BRIDGE-MIB
InterfaceIndex
FROM IF-MIB
Counter32, enterprises, Integer32, IpAddress, NOTIFICATION-TYPE,
OBJECT-TYPE, Opaque
FROM SNMPv2-SMI
DateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
-----------------------------------------------
-- Textual Convention Definitions
-----------------------------------------------
AlarmTypeValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Alarm Type (CCITT Rec. X.733)"
SYNTAX INTEGER {
invalid(0),
communicationsAlarm(1),
qualityOfServiceAlarm(2),
processingErrorAlarm(3),
equipmentAlarm(4),
environmentalAlarm(5),
integrityViolationAlarm(6),
operationalViolationAlarm(7),
physicalViolationAlarm(8),
securityViolationAlarm(9),
timeDomainViolationAlarm(10)
}
ProbableCauseValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Probable Cause (CCITT Rec. X.733)"
SYNTAX INTEGER {
invalid(0),
aIS(1),
callSetUpFailure(2),
degradedSignal(3),
farEndReceiverFailure(4),
framingError(5),
lossOfFrame(6),
lossOfPointer(7),
lossOfSignal(8),
payloadTypeMismatch(9),
transmissionError(10),
remoteAlarmInterface(11),
excessiveBER(12),
pathTraceMismatch(13),
unavailable(14),
signalLabelMismatch(15),
lossOfMultiFrame(16),
receiveFailure(17),
transmitFailure(18),
modulationFailure(19),
demodulationFailure(20),
broadcastChannelFailure(21),
connectionEstablishmentError(22),
invalidMessageReceived(23),
localNodeTransmissionError(24),
remoteNodeTransmissionError(25),
routingFailure(26),
backplaneFailure(51),
dataSetProblem(52),
equipmentIdentifierDuplication(53),
externalIFDeviceProblem(54),
lineCardProblem(55),
multiplexerProblem(56),
nEIdentifierDuplication(57),
powerProblem(58),
processorProblem(59),
protectionPathFailure(60),
receiverFailure(61),
replaceableUnitMissing(62),
replaceableUnitTypeMismatch(63),
synchronizationSourceMismatch(64),
terminalProblem(65),
timingProblem(66),
transmitterFailure(67),
trunkCardProblem(68),
replaceableUnitProblem(69),
realTimeClockFailure(70),
antennaFailure(71),
batteryChargingFailure(72),
diskFailure(73),
frequencyHoppingFailure(74),
iODeviceError(75),
lossOfSynchronisation(76),
lossOfRedundancy(77),
powerSupplyFailure(78),
signalQualityEvaluationFailure(79),
tranceiverFailure(80),
protectionMechanismFailure(81),
protectingResourceFailure(82),
airCompressorFailure(101),
airConditioningFailure(102),
airDryerFailure(103),
batteryDischarging(104),
batteryFailure(105),
commercialPowerFailure(106),
coolingFanFailure(107),
engineFailure(108),
fireDetectorFailure(109),
fuseFailure(110),
generatorFailure(111),
lowBatteryThreshold(112),
pumpFailure(113),
rectifierFailure(114),
rectifierHighVoltage(115),
rectifierLowFVoltage(116),
ventilationsSystemFailure(117),
enclosureDoorOpen(118),
explosiveGas(119),
fire(120),
flood(121),
highHumidity(122),
highTemperature(123),
highWind(124),
iceBuildUp(125),
intrusionDetection(126),
lowFuel(127),
lowHumidity(128),
lowCablePressure(129),
lowTemperatue(130),
lowWater(131),
smoke(132),
toxicGas(133),
coolingSystemFailure(134),
externalEquipmentFailure(135),
externalPointFailure(136),
storageCapacityProblem(151),
memoryMismatch(152),
corruptData(153),
outOfCPUCycles(154),
sfwrEnvironmentProblem(155),
sfwrDownloadFailure(156),
lossOfRealTimel(157),
applicationSubsystemFailure(158),
configurationOrCustomisationError(159),
databaseInconsistency(160),
fileError(161),
outOfMemory(162),
softwareError(163),
timeoutExpired(164),
underlayingResourceUnavailable(165),
versionMismatch(166),
bandwidthReduced(201),
congestion(202),
excessiveErrorRate(203),
excessiveResponseTime(204),
excessiveRetransmissionRate(205),
reducedLoggingCapability(206),
systemResourcesOverload(207),
adapterError(500),
applicationSubsystemFailture(501),
bandwidthReducedX733(502),
callEstablishmentError(503),
communicationsProtocolError(504),
communicationsSubsystemFailure(505),
configurationOrCustomizationError(506),
congestionX733(507),
coruptData(508),
cpuCyclesLimitExceeded(509),
dataSetOrModemError(510),
degradedSignalX733(511),
dteDceInterfaceError(512),
enclosureDoorOpenX733(513),
equipmentMalfunction(514),
excessiveVibration(515),
fileErrorX733(516),
fireDetected(517),
framingErrorX733(518),
heatingVentCoolingSystemProblem(519),
humidityUnacceptable(520),
inputOutputDeviceError(521),
inputDeviceError(522),
lanError(523),
leakDetected(524),
localNodeTransmissionErrorX733(525),
lossOfFrameX733(526),
lossOfSignalX733(527),
materialSupplyExhausted(528),
multiplexerProblemX733(529),
outOfMemoryX733(530),
ouputDeviceError(531),
performanceDegraded(532),
powerProblems(533),
pressureUnacceptable(534),
processorProblems(535),
pumpFailureX733(536),
queueSizeExceeded(537),
receiveFailureX733(538),
receiverFailureX733(539),
remoteNodeTransmissionErrorX733(540),
resourceAtOrNearingCapacity(541),
responseTimeExecessive(542),
retransmissionRateExcessive(543),
softwareErrorX733(544),
softwareProgramAbnormallyTerminated(545),
softwareProgramError(546),
storageCapacityProblemX733(547),
temperatureUnacceptable(548),
thresholdCrossed(549),
timingProblemX733(550),
toxicLeakDetected(551),
transmitFailureX733(552),
transmiterFailure(553),
underlyingResourceUnavailable(554),
versionMismatchX733(555),
authenticationFailure(600),
breachOfConfidentiality(601),
cableTamper(602),
delayedInformation(603),
denialOfService(604),
duplicateInformation(605),
informationMissing(606),
informationModificationDetected(607),
informationOutOfSequence(608),
keyExpired(609),
nonRepudiationFailure(610),
outOfHoursActivity(611),
outOfService(612),
proceduralError(613),
unauthorizedAccessAttempt(614),
unexpectedInformation(615),
other(1024)
}
-----------------------------------------------
-- Begin User MIB Object Definitions
-----------------------------------------------
nec OBJECT IDENTIFIER
::= { enterprises 119 }
nec-mib OBJECT IDENTIFIER
::= { nec 2 }
necProductDepend OBJECT IDENTIFIER
::= { nec-mib 3 }
radioEquipment OBJECT IDENTIFIER
::= { necProductDepend 69 }
system1 OBJECT IDENTIFIER
::= { radioEquipment 1 }
system5 OBJECT IDENTIFIER
::= { radioEquipment 5 }
-----------------------------------------------
-- system1 Group Definitions
-----------------------------------------------
pmSystem OBJECT IDENTIFIER
::= { system1 1 }
sysPmType OBJECT-TYPE
SYNTAX INTEGER { typeBranchNE(13), typeNormal(14) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PM TYPE SETTING."
::= { pmSystem 3 }
sysPrimaryIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PRIMARY IP ADDRESS."
::= { pmSystem 5 }
sysOppositeIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address of the destination."
::= { pmSystem 9 }
sysEquipmentType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Equipment Type."
::= { pmSystem 13 }
sysEquipmentConfig OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Equipment Config."
::= { pmSystem 14 }
-----------------------------------------------
-- system5 Group Definitions
-----------------------------------------------
ipeSystemGroup OBJECT IDENTIFIER
::= { system5 1 }
ipeSysInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeSysInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of System Information."
::= { ipeSystemGroup 1 }
ipeSysInfoEntry OBJECT-TYPE
SYNTAX IpeSysInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of System Information."
INDEX { ipeSysInfoIndex }
::= { ipeSysInfoTable 1 }
IpeSysInfoEntry ::= SEQUENCE {
ipeSysInfoIndex Integer32,
ipeSysInfoNEAddress IpAddress,
ipeSysNeName DisplayString,
ipeSysAreaName DisplayString,
ipeSysNote DisplayString,
ipeSysPrimaryIpAddress IpAddress,
ipeSysSubnetMask IpAddress,
ipeSysDefaultGateway IpAddress,
ipeSysMacAddress MacAddress,
ipeSysMibVersion DisplayString,
ipeSysEquipmentType Integer32,
ipeSysPmType Integer32
}
ipeSysInfoIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeSysInfoEntry 1 }
ipeSysInfoNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeSysInfoEntry 2 }
ipeSysNeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Equipment name (for display)."
::= { ipeSysInfoEntry 3 }
ipeSysAreaName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Area name (for display)."
::= { ipeSysInfoEntry 4 }
ipeSysNote OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Memorandum (for display)."
::= { ipeSysInfoEntry 5 }
ipeSysPrimaryIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Primary IP Address (for display and setting)."
::= { ipeSysInfoEntry 6 }
ipeSysSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Subnet mask (for display)."
::= { ipeSysInfoEntry 7 }
ipeSysDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Default gateway (for display)."
::= { ipeSysInfoEntry 8 }
ipeSysMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MAC address (for display)."
::= { ipeSysInfoEntry 9 }
ipeSysMibVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MIB version."
::= { ipeSysInfoEntry 10 }
ipeSysEquipmentType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Equipment type."
::= { ipeSysInfoEntry 11 }
ipeSysPmType OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of Branch.
1=normalNE mode.
1!=branchNE mode (2<= ipeSysPmType <= 20)."
::= { ipeSysInfoEntry 12 }
ipeSysInventoryInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeSysInventoryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of system basic information."
::= { ipeSystemGroup 2 }
ipeSysInventoryInfoEntry OBJECT-TYPE
SYNTAX IpeSysInventoryInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of system basic information."
INDEX { ipeSysInventoryInfoIndex }
::= { ipeSysInventoryInfoTable 1 }
IpeSysInventoryInfoEntry ::= SEQUENCE {
ipeSysInventoryInfoIndex Integer32,
ipeSysInventoryInfoNEAddress IpAddress,
ipeSysInvSoftwareVersion DisplayString,
ipeSysInvSoftwareReleaseDate DateAndTime,
ipeSysInvDlSoftwareVersion DisplayString,
ipeSysInvOperationSide Integer32,
ipeSysInvStandbySoftwareVersion DisplayString
}
ipeSysInventoryInfoIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeSysInventoryInfoEntry 1 }
ipeSysInventoryInfoNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeSysInventoryInfoEntry 2 }
ipeSysInvSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Software version."
::= { ipeSysInventoryInfoEntry 3 }
ipeSysInvSoftwareReleaseDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Software update date and time."
::= { ipeSysInventoryInfoEntry 4 }
ipeSysInvDlSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Download control."
::= { ipeSysInventoryInfoEntry 5 }
ipeSysInvOperationSide OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Active side information."
::= { ipeSysInventoryInfoEntry 6 }
ipeSysInvStandbySoftwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Firmware version of inactive side."
::= { ipeSysInventoryInfoEntry 7 }
ipeSysOperationGroup OBJECT IDENTIFIER
::= { ipeSystemGroup 3 }
ipeSysOpTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeSysOpTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of date and time."
::= { ipeSysOperationGroup 1 }
ipeSysOpTimeEntry OBJECT-TYPE
SYNTAX IpeSysOpTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of date and time."
INDEX { ipeSysOpTimeIndex }
::= { ipeSysOpTimeTable 1 }
IpeSysOpTimeEntry ::= SEQUENCE {
ipeSysOpTimeIndex Integer32,
ipeSysOpTimeNEAddress IpAddress,
ipeSysOpCurrentTime DateAndTime,
ipeSysOpStartTime DateAndTime,
ipeSysOpUpTime Counter32
}
ipeSysOpTimeIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeSysOpTimeEntry 1 }
ipeSysOpTimeNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeSysOpTimeEntry 2 }
ipeSysOpCurrentTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Current time."
::= { ipeSysOpTimeEntry 3 }
ipeSysOpStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "OS started time."
::= { ipeSysOpTimeEntry 4 }
ipeSysOpUpTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Duration after OS started (second)."
::= { ipeSysOpTimeEntry 5 }
ipeSysOpFileDownloadTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeSysOpFileDownloadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of file download."
::= { ipeSysOperationGroup 2 }
ipeSysOpFileDownloadEntry OBJECT-TYPE
SYNTAX IpeSysOpFileDownloadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of file download."
INDEX { ipeSysOpFileDownloadIndex }
::= { ipeSysOpFileDownloadTable 1 }
IpeSysOpFileDownloadEntry ::= SEQUENCE {
ipeSysOpFileDownloadIndex Integer32,
ipeSysOpFileDownloadNEAddress IpAddress,
ipeSysOpFileDownloadModule INTEGER,
ipeSysOpFileDownloadCpuResetDetail INTEGER,
ipeSysOpFileDownloadStatus INTEGER,
ipeSysOpFileDownloadCtrl INTEGER,
ipeSysOpFileDownloadProtocolType INTEGER
}
ipeSysOpFileDownloadIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeSysOpFileDownloadEntry 1 }
ipeSysOpFileDownloadNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeSysOpFileDownloadEntry 2 }
ipeSysOpFileDownloadModule OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
idu(1),
odu(2),
mdprm(3),
raFpga(4),
ipeFpga(5),
softkey(7),
cfgNet(8),
cfgEqu(9),
cfgUser(10),
https(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Program type. *'0:Invalidity' is used as an initial state."
::= { ipeSysOpFileDownloadEntry 3 }
ipeSysOpFileDownloadCpuResetDetail OBJECT-TYPE
SYNTAX INTEGER { invalid(0), revertReset(1), normReset(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CPU reset control.
0:Invalidity
1:revert reset
2:normal reset( without revert )
*'0:Invalidity' is used as an initial state."
::= { ipeSysOpFileDownloadEntry 4 }
ipeSysOpFileDownloadStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
downloadCompleted(1),
downloadFailed(2),
downloadExecuting(3),
downloadSuspending(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Download result.
0:Invalidity
1:Completed
2:Failed
3:Executing
4:Suspending
*'0:Invalidity' is used as an initial state.
*A change state is the following three kinds.
1)When it operates normally:
(Start)->(3:Executing)->(1:Completed)
2)When it cancels on the way:
(Start)->(3:Executing)->(4:Suspending)-> (Completed)
3)When unusual detection is carried out on the way:
(Start)->(3:Executing)->(2:Failed)
*The download start from excluding (3:Executing) is permitted.
*The download start from (3:Executing) is not permitted.
*Pertinent details: ipeSysOpFileDownloadCtrl"
::= { ipeSysOpFileDownloadEntry 5 }
ipeSysOpFileDownloadCtrl OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
startDownload(1),
suspendDownload(2),
startUpload(3),
endUpload(4),
resetDownload(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Download control.
0:Invalidity
1:Download start
2:Download suspend
3:Upload start
4:Upload end
5:Download reset
*'0:Invalidity' is used as an initial state.
*'5:Download reset' terminates the FTP server(vsftpd) with the
deletion processing in the type of the file for all download
directory.
*The object file name allows only alphanumeric character '0-9',
'a-z', 'A-Z' of ASCII code, and sign '-_.+'.
*Pertinent details: ipeSysOpFileDownloadProtocolType
*Pertinent details: ipeSysOpFileDownloadModule
*Pertinent details: ipeSysOpFileDownloadStatus
*Pertinent details: ipeFsUpdateFileStatus
*Pertinent details: ipeFsUsbProcStatus
[Race condition]
*When ipeSysOpFileDownloadStatus is (3:Executing) or
(4:Suspending), (1:Download start) is invalid.
*When ipeSysOpFileDownloadStatus is (4:Suspending), (2:Download
suspend) is invalid.
*When ipeSysOpFileDownloadStatus is (0:Invalidity), (1:Download
start) is valid, but do nothing.
*When ipeFsUpdateFileStatusis(3:Executing), it is invalid. Other
one is valid.
*When ipeFsUsbProcStatus is (2:Normal:Process executing), it is
invalid. Other one is valid.
[Indispensable condition]
*When it is (1:Download start) or (3:Upload start), (4:Upload
end),ipeSysOpFileDownloadProtocolType setup is indispensable."
::= { ipeSysOpFileDownloadEntry 6 }
ipeSysOpFileDownloadProtocolType OBJECT-TYPE
SYNTAX INTEGER { invalid(0), ftp(1), sftp(2), http(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Kind of protocol,
*'0:Invalidity' is used as an initial state.
*Pertinent details: ipeSysOpFileDownloadCtrl"
::= { ipeSysOpFileDownloadEntry 7 }
ipeSysOpProgramPmonRmonClearTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeSysOpProgramPmonRmonClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { ipeSysOperationGroup 3 }
ipeSysOpProgramPmonRmonClearEntry OBJECT-TYPE
SYNTAX IpeSysOpProgramPmonRmonClearEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { ipeSysOpProgramPmonRmonClearIndex }
::= { ipeSysOpProgramPmonRmonClearTable 1 }
IpeSysOpProgramPmonRmonClearEntry ::= SEQUENCE {
ipeSysOpProgramPmonRmonClearIndex Integer32,
ipeSysOpProgramPmonRmonClearNEAddress IpAddress,
ipeSysOpProgramPmonRmonClear Integer32,
ipeSysOpProgramPmonRmonClearResult INTEGER
}
ipeSysOpProgramPmonRmonClearIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeSysOpProgramPmonRmonClearEntry 1 }
ipeSysOpProgramPmonRmonClearNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeSysOpProgramPmonRmonClearEntry 2 }
ipeSysOpProgramPmonRmonClear OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PMON data clear control
0:FIXED VALUE 1:REQUEST"
::= { ipeSysOpProgramPmonRmonClearEntry 3 }
ipeSysOpProgramPmonRmonClearResult OBJECT-TYPE
SYNTAX INTEGER { invalid(0), completed(1), failed(2), executing(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PMON data clear control response
1:COMPLETED
2:FAILED
3:EXECUTING"
::= { ipeSysOpProgramPmonRmonClearEntry 4 }
ipeFileSystemGroup OBJECT IDENTIFIER
::= { system5 2 }
ipeFsFileInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeFsFileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of file information."
::= { ipeFileSystemGroup 1 }
ipeFsFileInfoEntry OBJECT-TYPE
SYNTAX IpeFsFileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of file information."
INDEX { ipeFsFileInfoIndex }
::= { ipeFsFileInfoTable 1 }
IpeFsFileInfoEntry ::= SEQUENCE {
ipeFsFileInfoIndex Integer32,
ipeFsFileInfoNEAddress IpAddress,
ipeFsFileListType INTEGER,
ipeFsFileListCurrent DisplayString,
ipeFsFileListTemp DisplayString,
ipeFsUpdateFileDetail DisplayString,
ipeFsUpdateFileStatus INTEGER,
ipeFsUpdateFileStatusDetail OCTET STRING,
ipeFsUpdateFileProgressBase Integer32,
ipeFsUpdateFileProgress Integer32,
ipeFsUpdateFileUpdateList DisplayString,
ipeFsUpdateFileConfigPartial OCTET STRING
}
ipeFsFileInfoIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeFsFileInfoEntry 1 }
ipeFsFileInfoNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeFsFileInfoEntry 2 }
ipeFsFileListType OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
idu(1),
odu(2),
mdprm(3),
raFpga(4),
ipeFpga(5),
softkey(7),
cfgNet(8),
cfgEqu(9),
cfgUser(10),
https(11),
pmon(12),
rmon(13),
log(14),
inventory(15),
mac(16),
all(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type for acquisition
0:Invalidity
1: IDU
2: ODU
3: MODEM Parameter
4: FPGA(Other slot)
5: FPGA(Ctrl)
6: MSE
7: Software Key License
8: Network Config
9: Equipment Config
10: User Config
11: Server Certificate for HTTPS/HTTPS certificate issue request
12: PMON data
13: RMON data
14: Command/event/alarm LOG
15: Device Inventory file
16: MAC learning entry
17: all(All types)
18: Card Firmware
19: Private key for SSL Server Certificate
20: CSR (Certificate Signing Request) for SSL Server Certificate
21: CA (Certification Authority) certificate for SSL Server
Certificate
22: Modem Controller(valid for MODEM-AV)
*'0:Invalidity' is used as an initial state.
*Pertinent details: ipeFsFileListCurrent
*Pertinent details: ipeFsFileListTemp"
::= { ipeFsFileInfoEntry 3 }
ipeFsFileListCurrent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current file list (Flash-ROM).
The list of the type set to ipeFsFileListType is acquired.
Form of file list:
It's 1 item by 'file name (It included in a path),file
size,CRC'.
Each item is divided at space.
*CRC is fixed '0'.
Ex) FilePath1/FileName1,size,CRC FilePath2/FileName2,size,CRC...
[Indispensable condition]
*ipeFsFileListType setup is indispensable."
::= { ipeFsFileInfoEntry 4 }
ipeFsFileListTemp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temporary file list (DRAM).
The list of the type set to ipeFsFileListType is acquired.
Form of file list:
It's 1 item by 'file name (It isn't included in a pass),file
size,CRC'.
Each item is divided at space.
*CRC is fixed '0'.
Ex) Filename1,size,CRC Filename2,size,CRC...
[Indispensable condition]
*ipeFsFileListType setup is indispensable."
::= { ipeFsFileInfoEntry 5 }
ipeFsUpdateFileDetail OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"File update control.
Thing to specify object file after it downloads it by
'ipeSysOpFileDownloadCtrl','ipeFsUsbCommand' and to demand file
update.
Ex) Filename1
*The object file name allows only alphanumeric character '0-9',
'a-z', 'A-Z' of ASCII code, and sign '-_.+'.
*Pertinent details: ipeSysOpFileDownloadModule
*Pertinent details: ipeFsUpdateFileUpdateList
*Pertinent details: ipeSysOpFileDownloadStatus
*Pertinent details: ipeFsUpdateFileStatus
*Pertinent details: ipeFsUsbProcStatus
[Race condition]
*When ipeSysOpFileDownloadStatus is (3:Executing) or
(4:Suspending), it is invalid.
*When ipeFsUpdateFileStatusis(3:Executing), it is invalid.
*When ipeFsUsbProcStatus is (2:Normal :Process executing), it is
invalid.
[Indispensable condition]
*When ipeSysOpFileDownloadModule is 'odu(2)', 'mdprm(3)', or
'raFpga(4)', ipeFsUpdateFileUpdateList setup is indispensable."
::= { ipeFsFileInfoEntry 6 }
ipeFsUpdateFileStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
success(1),
failure(2),
executing(3),
checking(4),
successWithoutRestrictedUser(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Update result.
0:Invalidity
1:Success
2:Failed
3:Executing
4:Checking
5:Success but some restricted UserName(s) are ignored
*'0:Invalidity' is used as an initial state.
*The slot result of the correspondence is set to
'IpeFsUpdateFileStatusDetail',
and processing is continued when failing in the two or more
slot update.
*Pertinent details: ipeFsUpdateFileDetail
*Pertinent details: ipeFsUpdateFileStatusDetail"
::= { ipeFsFileInfoEntry 7 }
ipeFsUpdateFileStatusDetail OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(42..42))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Update result is detailed.
OCT: Update result of each slot
1: Completed
2: Failed
The slot for which the current state is used becomes the
following.
OCT[0] : MainBoard(iPASO200) or SLOT0
OCT[1] : MODEM1(iPASO200) or SLOT1
OCT[2] : MODEM2(iPASO200) or SLOT2
OCT[3] : Option Card(iPASO200) or SLOT3
:
OCT[33]: ODU1
OCT[34]: ODU2
OCT[35]: ODU3
:
*Pertinent details: ipeSysOpFileDownloadCtrl
*Pertinent details: ipeFsUpdateFileDetail
*Pertinent details: ipeFsUsbCommand"
::= { ipeFsFileInfoEntry 8 }
ipeFsUpdateFileProgressBase OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Progress of update (denominator).
*Pertinent details: ipeSysOpFileDownloadModule
*Pertinent details: ipeFsUpdateFileStatus"
::= { ipeFsFileInfoEntry 9 }
ipeFsUpdateFileProgress OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Progress of update (molecule).
*Pertinent details: ipeSysOpFileDownloadModule
*Pertinent details: ipeFsUpdateFileStatus"
::= { ipeFsFileInfoEntry 10 }
ipeFsUpdateFileUpdateList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Definition of update slot number.
Form of file list:
When downloading it to ODU/FPGA/MDPRM, the forwarding site slot
number is enumerated by a comma end.
Ex) 0,5,1,6,10...
The slot number of relating MODEM and fpga must set the slot
number of
Option Card to odu and mdprm according to inventory
information.
The slot number to which the current state can be set becomes the
following.
iPASO200 iPASO400,1000
0 : MainBoard or SLOT0
1 : MODEM1 or SLOT1
2 : MODEM2 or SLOT2
3 : Option Card or SLOT3
:
33: ODU1
34: ODU2
35: ODU3
:
*Pertinent details: ipeFsUpdateFileDetail"
::= { ipeFsFileInfoEntry 11 }
ipeFsUpdateFileConfigPartial OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify Equipment Configuration Partial Download pattern.
If this object is set with ipeFsUpdateFileDetail, the system will
perform the partial download, otherwise the system will perform
the normal download. And Partial Download is performed only when
Equipment Configuration Dowload.
SYNTAX is 32bit string. The definition of each bit is shown
below.
- bit1-4: specify download mode.
0001 : normal mode
other value : reserved (system rejects the request)
- bit5-32: specify the equipment config part. Setting 1 to each
bit means corresponding config download is activated.
Bit5 : Equipment Configuration (must set when the normal mode)
Bit6 : Radio Configuration
Bit7 : Radio Configuration w/o Radio Frequency
Bit6 and Bit7 cannot be set to 1 simultaneously.
Bit8 : E1/STM1 Mapping (must set when Bit6 or Bit7 is activated)
Bit9 : MODEM Function setting
Bit10: ETH Function setting
Bit11: E1/STM1/Cross Connect Setting
Bit12: PWE Setting
Bit13: Equipment Clock/Synchronization Setting
Bit14: Relay-Alarm Mapping
Bit15: V11/OW Setting
Bit16: Alarm/AIS Setting
Bit17: PMON/RMON Setting
Bit18: AUX Setting
other: reserved (don't care)
Example)
the pattern of downloading the equipment configuration, radio
configuration, E1/STM1 mapping, ETH Function Setting on normal
mode.
ipeFsUpdateFileConfigPartial =
'00011101010000000000000000000000'"
::= { ipeFsFileInfoEntry 12 }
ipeFsUsbInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeFsUsbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of USB memory information."
::= { ipeFileSystemGroup 2 }
ipeFsUsbInfoEntry OBJECT-TYPE
SYNTAX IpeFsUsbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of USB mamory information."
INDEX { ipeFsUsbInfoIndex }
::= { ipeFsUsbInfoTable 1 }
IpeFsUsbInfoEntry ::= SEQUENCE {
ipeFsUsbInfoIndex Integer32,
ipeFsUsbInfoNEAddress IpAddress,
ipeFsUsbCommand DisplayString,
ipeFsUsbProcStatus INTEGER,
ipeFsUsbList DisplayString,
ipeFsUsbConnectStatus INTEGER
}
ipeFsUsbInfoIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeFsUsbInfoEntry 1 }
ipeFsUsbInfoNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeFsUsbInfoEntry 2 }
ipeFsUsbCommand OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"USB control mode/USB file path/Program type specification.
[Mode],[Arg1],[Type]
Mode:USB control mode
0:DL, 1:UL
Arg1:object file path -1 (original file path (path from a
chroot subordinate) When DL: Inside of USB, When UL: Inside of
IPE)
Case of DL: Ex.) idu/iPASOLINK200-idufw-v1.00.XX.bin
Case of UL: Ex.) export/config/iPASOLINK-network.cfg
Type:Program type
The program type set to 'ipeSysOpFileDownloadModule' is
specified.
*The unsetting is allowed for an arbitrary, set item.
0: Invalid
1: IDU F/W
2: ODU F/W
3: MODEM Parameter
4: FPGA(Option Card)
5: FPGA(MainBoard)
6: MSE Card F/W
7: Software License Key
8: Network Config
9: Equipment Config
10: User Config
11: HTTPS Server Certificate
*The object file name allows only alphanumeric character '0-9',
'a-z', 'A-Z' of ASCII code, and sign '-_.+'.
*Pertinent details: ipeSysOpFileDownloadModule
*Pertinent details: ipeSysOpFileDownloadStatus
*Pertinent details: ipeFsUpdateFileStatus
*Pertinent details: ipeFsUsbProcStatus
[Race condition]
*When ipeSysOpFileDownloadStatus is (3:Executing) or
(4:Suspending), (0:DL) is invalid.
*When ipeFsUpdateFileStatusis (3:Executing), (0:DL) is invalid.
*When ipeFsUsbProcStatus is (2:Normal :Process executing),
(0:DL) is invalid."
::= { ipeFsUsbInfoEntry 3 }
ipeFsUsbProcStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
completed(1),
executing(2),
diskFullError(98),
noSuchFileError(99),
unKnownFileError(101),
notInsertError(102),
accessError(103),
otherError(127)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of USB memory control result.
The classification of a setting value and the meaning are as
follows.
0:Invalidity
1:NORMAL:Normal end
2:NORMAL:Executing
98:ERROR:The lack of free space on disk or media
99:ERROR:File/directory not found
101:ERROR:The kind of designated files,the size, contents, etc.
are unjust
102:ERROR:Media aren't inserted
103:ERROR:Media access error (ex:unjust format)
127:ERROR:Undefined error (other errors)
When having a control instruction, it's made '2:Executing'.
*'0:Invalidity' is used as an initial state.
*Pertinent details: ipeFsUsbCommand"
::= { ipeFsUsbInfoEntry 4 }
ipeFsUsbList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"File list format.
Form of file list:
It's 1 item by 'file name (path from a chroot subordinate),file
size,CRC'.
Each item is divided at space.
*CRC is fixed '0'.
Ex) FilePath1/FileName1,size,CRC FilePath2/FileName2,size,CRC..."
::= { ipeFsUsbInfoEntry 5 }
ipeFsUsbConnectStatus OBJECT-TYPE
SYNTAX INTEGER { usbConnect(1), usbNoConnect(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of connection USB memory.
1:Connect
2:Not connect"
::= { ipeFsUsbInfoEntry 6 }
ipeConfigurationGroup OBJECT IDENTIFIER
::= { system5 3 }
ipeCfgSystemTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of System Item Information."
::= { ipeConfigurationGroup 1 }
ipeCfgSystemEntry OBJECT-TYPE
SYNTAX IpeCfgSystemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of System Item Information."
INDEX { ipeCfgSystemIndex }
::= { ipeCfgSystemTable 1 }
IpeCfgSystemEntry ::= SEQUENCE {
ipeCfgSystemIndex Integer32,
ipeCfgSystemNEAddress IpAddress,
ipeCfgNeName DisplayString,
ipeCfgAreaName DisplayString,
ipeCfgMemo DisplayString
}
ipeCfgSystemIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgSystemEntry 1 }
ipeCfgSystemNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgSystemEntry 2 }
ipeCfgNeName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PASOLINK unit name. White space characters are not allowed for
head or tail of characters."
::= { ipeCfgSystemEntry 3 }
ipeCfgAreaName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Area name. White space characters are not allowed for head or
tail of characters."
::= { ipeCfgSystemEntry 4 }
ipeCfgMemo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Memorandum. White space characters are not allowed for head or
tail of characters."
::= { ipeCfgSystemEntry 5 }
ipeCfgOemTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgOemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Equipment Item Information."
::= { ipeConfigurationGroup 2 }
ipeCfgOemEntry OBJECT-TYPE
SYNTAX IpeCfgOemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of Equipment Item Information."
INDEX { ipeCfgOemIndex }
::= { ipeCfgOemTable 1 }
IpeCfgOemEntry ::= SEQUENCE {
ipeCfgOemIndex Integer32,
ipeCfgOemNEAddress IpAddress,
ipeCfgOemSysDescr DisplayString,
ipeCfgOemSysContact DisplayString,
ipeCfgOemSysName DisplayString,
ipeCfgOemSysLocation DisplayString
}
ipeCfgOemIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgOemEntry 1 }
ipeCfgOemNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgOemEntry 2 }
ipeCfgOemSysDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System Description.
The space of the begininng and end dose not permit it."
::= { ipeCfgOemEntry 3 }
ipeCfgOemSysContact OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System contact.
The space of the begininng and end dose not permit it."
::= { ipeCfgOemEntry 4 }
ipeCfgOemSysName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System name.
The space of the begininng and end dose not permit it."
::= { ipeCfgOemEntry 5 }
ipeCfgOemSysLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System location.
The space of the begininng and end dose not permit it."
::= { ipeCfgOemEntry 6 }
ipeCfgAux OBJECT IDENTIFIER
::= { ipeConfigurationGroup 3 }
ipeCfgAuxInTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgAuxInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Aux Input Table"
::= { ipeCfgAux 1 }
ipeCfgAuxInEntry OBJECT-TYPE
SYNTAX IpeCfgAuxInEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { ipeCfgAuxInIndex }
::= { ipeCfgAuxInTable 1 }
IpeCfgAuxInEntry ::= SEQUENCE {
ipeCfgAuxInIndex Integer32,
ipeCfgAuxInNEAddress IpAddress,
ipeCfgAuxInItemName DisplayString,
ipeCfgAuxInItemType INTEGER,
ipeCfgAuxInOpenState DisplayString,
ipeCfgAuxInCloseState DisplayString,
ipeCfgAuxInSeverity INTEGER,
ipeCfgAuxInAlarmType AlarmTypeValue,
ipeCfgAuxInProbableCause ProbableCauseValue
}
ipeCfgAuxInIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgAuxInEntry 1 }
ipeCfgAuxInNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgAuxInEntry 2 }
ipeCfgAuxInItemName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Item Name"
::= { ipeCfgAuxInEntry 3 }
ipeCfgAuxInItemType OBJECT-TYPE
SYNTAX INTEGER { alarmInOpen(1), alarmInClose(2), status(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Item Type"
::= { ipeCfgAuxInEntry 4 }
ipeCfgAuxInOpenState OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status Strings (Event Off (Open))"
::= { ipeCfgAuxInEntry 5 }
ipeCfgAuxInCloseState OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status Strings (Event On (Close))"
::= { ipeCfgAuxInEntry 6 }
ipeCfgAuxInSeverity OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
critical(1),
major(2),
minor(3),
warning(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity (X.733)"
::= { ipeCfgAuxInEntry 7 }
ipeCfgAuxInAlarmType OBJECT-TYPE
SYNTAX AlarmTypeValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alarm Type (X.733)"
::= { ipeCfgAuxInEntry 8 }
ipeCfgAuxInProbableCause OBJECT-TYPE
SYNTAX ProbableCauseValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Probable Cause (X.733)"
::= { ipeCfgAuxInEntry 9 }
ipeCfgAuxOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgAuxOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "AUX Output Table"
::= { ipeCfgAux 2 }
ipeCfgAuxOutEntry OBJECT-TYPE
SYNTAX IpeCfgAuxOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { ipeCfgAuxOutIndex }
::= { ipeCfgAuxOutTable 1 }
IpeCfgAuxOutEntry ::= SEQUENCE {
ipeCfgAuxOutIndex Integer32,
ipeCfgAuxOutNEAddress IpAddress,
ipeCfgAuxOutItemName DisplayString,
ipeCfgAuxOutOpenState DisplayString,
ipeCfgAuxOutCloseState DisplayString
}
ipeCfgAuxOutIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgAuxOutEntry 1 }
ipeCfgAuxOutNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgAuxOutEntry 2 }
ipeCfgAuxOutItemName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Item Name"
::= { ipeCfgAuxOutEntry 3 }
ipeCfgAuxOutOpenState OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status Strings (Event Off (Open))"
::= { ipeCfgAuxOutEntry 4 }
ipeCfgAuxOutCloseState OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status Strings (Event On (Close))"
::= { ipeCfgAuxOutEntry 5 }
ipeCfgNtp OBJECT IDENTIFIER
::= { ipeConfigurationGroup 4 }
ipeCfgNtpServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgNtpServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of NTP configuration information."
::= { ipeCfgNtp 1 }
ipeCfgNtpServiceEntry OBJECT-TYPE
SYNTAX IpeCfgNtpServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of NTP configuration information."
INDEX { ipeCfgNtpServiceIndex }
::= { ipeCfgNtpServiceTable 1 }
IpeCfgNtpServiceEntry ::= SEQUENCE {
ipeCfgNtpServiceIndex Integer32,
ipeCfgNtpServiceNEAddress IpAddress,
ipeCfgNtpServiceEnable INTEGER,
ipeCfgNtpServerMode INTEGER,
ipeCfgNtpClientMode INTEGER,
ipeCfgNtpServerStratum Integer32,
ipeCfgNtpServerMulticastPort Integer32,
ipeCfgNtpServerMulticastIntervalTime Integer32
}
ipeCfgNtpServiceIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgNtpServiceEntry 1 }
ipeCfgNtpServiceNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgNtpServiceEntry 2 }
ipeCfgNtpServiceEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NTP control enable."
::= { ipeCfgNtpServiceEntry 3 }
ipeCfgNtpServerMode OBJECT-TYPE
SYNTAX INTEGER { invalid(0), unicast(1), multicast(2), disabled(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NTP server mode."
::= { ipeCfgNtpServiceEntry 4 }
ipeCfgNtpClientMode OBJECT-TYPE
SYNTAX INTEGER { invalid(0), unicast(1), multicast(2), disabled(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NTP client mode."
::= { ipeCfgNtpServiceEntry 5 }
ipeCfgNtpServerStratum OBJECT-TYPE
SYNTAX Integer32 (2..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NTP Stratum."
::= { ipeCfgNtpServiceEntry 6 }
ipeCfgNtpServerMulticastPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NTP server multicast port."
::= { ipeCfgNtpServiceEntry 7 }
ipeCfgNtpServerMulticastIntervalTime OBJECT-TYPE
SYNTAX Integer32 (4..17)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of NTP multicast polling time."
::= { ipeCfgNtpServiceEntry 8 }
ipeCfgNtpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgNtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of NTP server information."
::= { ipeCfgNtp 2 }
ipeCfgNtpServerEntry OBJECT-TYPE
SYNTAX IpeCfgNtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of NTP server information."
INDEX { ipeCfgNtpServerIndex }
::= { ipeCfgNtpServerTable 1 }
IpeCfgNtpServerEntry ::= SEQUENCE {
ipeCfgNtpServerIndex Integer32,
ipeCfgNtpServerNEAddress IpAddress,
ipeCfgNtpServerAddress IpAddress,
ipeCfgNtpVersion Integer32,
ipeCfgNtpPollTime Integer32
}
ipeCfgNtpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgNtpServerEntry 1 }
ipeCfgNtpServerNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgNtpServerEntry 2 }
ipeCfgNtpServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP Address of NTP server."
::= { ipeCfgNtpServerEntry 3 }
ipeCfgNtpVersion OBJECT-TYPE
SYNTAX Integer32 (3..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Version of supported NTP message."
::= { ipeCfgNtpServerEntry 4 }
ipeCfgNtpPollTime OBJECT-TYPE
SYNTAX Integer32 (4..17)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NTP Polling Time, in seconds as a power of two.
For instance, a value of six indicates a interval of 64 seconds.
Note) The value less than 6 is rejected by the agent because of
the system recommendation.
iPASOLINK 200/400/1000 series : R3.5 or later.
iPASOLINK AOR : R1.0 or later."
::= { ipeCfgNtpServerEntry 5 }
ipeCfgFtp OBJECT IDENTIFIER
::= { ipeConfigurationGroup 7 }
ipeCfgFtpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgFtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of FTP server configuration information."
::= { ipeCfgFtp 1 }
ipeCfgFtpServerEntry OBJECT-TYPE
SYNTAX IpeCfgFtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of FTP server configuration information."
INDEX { ipeCfgFtpServerIndex }
::= { ipeCfgFtpServerTable 1 }
IpeCfgFtpServerEntry ::= SEQUENCE {
ipeCfgFtpServerIndex Integer32,
ipeCfgFtpServerNEAddress IpAddress,
ipeCfgFtpServerEnable INTEGER,
ipeCfgFtpServerCommandTcpPort Integer32,
ipeCfgFtpServerDataTcpPort Integer32,
ipeCfgFtpServerMaxSession Integer32,
ipeCfgFtpServerAutoDisable INTEGER
}
ipeCfgFtpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgFtpServerEntry 1 }
ipeCfgFtpServerNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgFtpServerEntry 2 }
ipeCfgFtpServerEnable OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
serviceDisable(1),
serviceEnable(2),
alwaysEnable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "FTP control enable."
::= { ipeCfgFtpServerEntry 3 }
ipeCfgFtpServerCommandTcpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port number of FTP command."
::= { ipeCfgFtpServerEntry 4 }
ipeCfgFtpServerDataTcpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port number of FTP data transfer."
::= { ipeCfgFtpServerEntry 5 }
ipeCfgFtpServerMaxSession OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of max connections."
::= { ipeCfgFtpServerEntry 6 }
ipeCfgFtpServerAutoDisable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "FTP automatic stop control enable."
::= { ipeCfgFtpServerEntry 7 }
ipeCfgSftp OBJECT IDENTIFIER
::= { ipeConfigurationGroup 8 }
ipeCfgSftpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgSftpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of SFTP server configuration information."
::= { ipeCfgSftp 1 }
ipeCfgSftpServerEntry OBJECT-TYPE
SYNTAX IpeCfgSftpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of SFTP server configuration information."
INDEX { ipeCfgSftpServerIndex }
::= { ipeCfgSftpServerTable 1 }
IpeCfgSftpServerEntry ::= SEQUENCE {
ipeCfgSftpServerIndex Integer32,
ipeCfgSftpServerNEAddress IpAddress,
ipeCfgSftpServerEnable INTEGER,
ipeCfgSftpServerAutoDisable INTEGER
}
ipeCfgSftpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgSftpServerEntry 1 }
ipeCfgSftpServerNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgSftpServerEntry 2 }
ipeCfgSftpServerEnable OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
serviceDisable(1),
serviceEnable(2),
alwaysEnable(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SFTP control enable."
::= { ipeCfgSftpServerEntry 3 }
ipeCfgSftpServerAutoDisable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SFTP automatic stop control enable."
::= { ipeCfgSftpServerEntry 4 }
ipeCfgHttp OBJECT IDENTIFIER
::= { ipeConfigurationGroup 9 }
ipeCfgHttpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgHttpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of HTTP configuration information."
::= { ipeCfgHttp 1 }
ipeCfgHttpServerEntry OBJECT-TYPE
SYNTAX IpeCfgHttpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of HTTP configuration information."
INDEX { ipeCfgHttpServerIndex }
::= { ipeCfgHttpServerTable 1 }
IpeCfgHttpServerEntry ::= SEQUENCE {
ipeCfgHttpServerIndex Integer32,
ipeCfgHttpServerNEAddress IpAddress,
ipeCfgHttpServerEnable INTEGER,
ipeCfgHttpServerTcpPort Integer32
}
ipeCfgHttpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgHttpServerEntry 1 }
ipeCfgHttpServerNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgHttpServerEntry 2 }
ipeCfgHttpServerEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HTTP control enable."
::= { ipeCfgHttpServerEntry 3 }
ipeCfgHttpServerTcpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port number of HTTP."
::= { ipeCfgHttpServerEntry 4 }
ipeCfgHttps OBJECT IDENTIFIER
::= { ipeConfigurationGroup 10 }
ipeCfgHttpsServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgHttpsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of HTTPS configuration information."
::= { ipeCfgHttps 1 }
ipeCfgHttpsServerEntry OBJECT-TYPE
SYNTAX IpeCfgHttpsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of HTTPS configuration information."
INDEX { ipeCfgHttpsServerIndex }
::= { ipeCfgHttpsServerTable 1 }
IpeCfgHttpsServerEntry ::= SEQUENCE {
ipeCfgHttpsServerIndex Integer32,
ipeCfgHttpsServerNEAddress IpAddress,
ipeCfgHttpsServerEnable INTEGER,
ipeCfgHttpsServerTcpPort Integer32
}
ipeCfgHttpsServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgHttpsServerEntry 1 }
ipeCfgHttpsServerNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgHttpsServerEntry 2 }
ipeCfgHttpsServerEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "HTTPS control enable."
::= { ipeCfgHttpsServerEntry 3 }
ipeCfgHttpsServerTcpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP port number of HTTPS."
::= { ipeCfgHttpsServerEntry 4 }
ipeCfgSnmp OBJECT IDENTIFIER
::= { ipeConfigurationGroup 11 }
ipeCfgSnmpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgSnmpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table of SNMP configuration information."
::= { ipeCfgSnmp 1 }
ipeCfgSnmpServerEntry OBJECT-TYPE
SYNTAX IpeCfgSnmpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A set of SNMP configuration information."
INDEX { ipeCfgSnmpServerIndex }
::= { ipeCfgSnmpServerTable 1 }
IpeCfgSnmpServerEntry ::= SEQUENCE {
ipeCfgSnmpServerIndex Integer32,
ipeCfgSnmpServerNEAddress IpAddress,
ipeCfgSnmpV1V2cEnable INTEGER,
ipeCfgSnmpV3Enable INTEGER,
ipeCfgSnmpServerPort Integer32
}
ipeCfgSnmpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgSnmpServerEntry 1 }
ipeCfgSnmpServerNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgSnmpServerEntry 2 }
ipeCfgSnmpV1V2cEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the SNMP entity is permitted to receive & process
SNMPv1/v2c PDU or is not permitted to do.
Even if it is disabled, SNMPv1/v2c Traps is sent."
::= { ipeCfgSnmpServerEntry 3 }
ipeCfgSnmpV3Enable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the SNMP entity is permitted to receive & process
SNMPv3 PDU or is not permitted to do.
Even if it is disabled, SNMPv3 Traps is sent."
::= { ipeCfgSnmpServerEntry 4 }
ipeCfgSnmpServerPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A UDP port number to receive all SNMP Request-PDU.
The reboot of the system is necessary to reflect setting."
::= { ipeCfgSnmpServerEntry 5 }
ipeCfgSnmpCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgSnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table of SNMP community information."
::= { ipeCfgSnmp 2 }
ipeCfgSnmpCommunityEntry OBJECT-TYPE
SYNTAX IpeCfgSnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A set of SNMP community information."
INDEX { ipeCfgSnmpCommunityIndex }
::= { ipeCfgSnmpCommunityTable 1 }
IpeCfgSnmpCommunityEntry ::= SEQUENCE {
ipeCfgSnmpCommunityIndex Integer32,
ipeCfgSnmpCommunityNEAddress IpAddress,
ipeCfgSnmpCommunityName DisplayString,
ipeCfgSnmpCommunityAccessLevel INTEGER,
ipeCfgSnmpCommunityAccessAddress IpAddress,
ipeCfgSnmpCommunityAccessPrefixLength Integer32,
ipeCfgSnmpCommunityRowStatus RowStatus
}
ipeCfgSnmpCommunityIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgSnmpCommunityEntry 1 }
ipeCfgSnmpCommunityNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgSnmpCommunityEntry 2 }
ipeCfgSnmpCommunityName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This entity's community name.
Please use ASCII code.
The characters which can be used are '-', '_','0'-'9', 'a'-'z'
and 'A'-'Z'."
::= { ipeCfgSnmpCommunityEntry 3 }
ipeCfgSnmpCommunityAccessLevel OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
operatorLevel(1),
configLevel(2),
adminLevel(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A access level of a connection using this entry's community
name."
::= { ipeCfgSnmpCommunityEntry 4 }
ipeCfgSnmpCommunityAccessAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An address which is permitted to use this entry's community
name.
When masking in ipeCfgSnmpCommunityAccessPrefixLength, the host
address part has to be a zero, if any.
Also the following address can't be used.
127.0.0.0/8 Loopback
224.0.0.0/4 Multicasts (former Class D)
240.0.0.0/4 Reserved (former Class E)"
::= { ipeCfgSnmpCommunityEntry 5 }
ipeCfgSnmpCommunityAccessPrefixLength OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A prefix length of ipeCfgSnmpCommunityAccessAddress."
::= { ipeCfgSnmpCommunityEntry 6 }
ipeCfgSnmpCommunityRowStatus OBJECT-TYPE
SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowStatus has a status only active(1).
You can SET only createAndGo(4) or Destroy(6).
1) how to create
To create a new row, you must SET objects indicated below.
ipeCfgSnmpCommunityName
ipeCfgSnmpCommunityAccessLevel
ipeCfgSnmpCommunityAccessAddress
ipeCfgSnmpCommunityAccessPrefixLength
ipeCfgSnmpCommunityAccessAddress2 *
ipeCfgSnmpCommunityAccessPrefixLength2 *
ipeCfgSnmpCommunityAccessAddress3 *
ipeCfgSnmpCommunityAccessPrefixLength3 *
ipeCfgSnmpCommunityAccessUsage *
ipeCfgSnmpCommunityAccessUsage2 *
ipeCfgSnmpCommunityAccessUsage3 *
ipeCfgSnmpCommunityAccessV6Address
ipeCfgSnmpCommunityAccessV6PrefixLength
ipeCfgSnmpCommunityAccessV6Address2 *
ipeCfgSnmpCommunityAccessV6PrefixLength2 *
ipeCfgSnmpCommunityAccessV6Address3 *
ipeCfgSnmpCommunityAccessV6PrefixLength3 *
ipeCfgSnmpCommunityAccessAddressType *
ipeCfgSnmpCommunityAccessV6Usage *
ipeCfgSnmpCommunityAccessV6Usage2 *
ipeCfgSnmpCommunityAccessV6Usage3 *
ipeCfgSnmpCommunityRowStatus <- createAndGo(4)
* NOT for EX CPRI
Either ipeCfgSnmpCommunityAccessAddress/Address2/Address3 or
ipeCfgSnmpCommunityAccessV6Address/Address2/Address3 can be
configured depending on ipeCfgSnmpCommunityAccessAddressType.
ipeCfgSnmpCommunityIndex is an index of this entry.
2) how to destroy
To destroy a exist row, you must SET a destory(6) to
ipeCfgSnmpCommunityRowStatus.
3) how to modify
It is not possible.
Please destroy a exist row, and create a new row.
< Attention >
You have to restart equipment to apply this entry(creating,
deleting) to actual movement."
::= { ipeCfgSnmpCommunityEntry 7 }
ipeCfgSnmpTrapTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgSnmpTrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table of notification information."
::= { ipeCfgSnmp 3 }
ipeCfgSnmpTrapEntry OBJECT-TYPE
SYNTAX IpeCfgSnmpTrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A set of notification information."
INDEX { ipeCfgSnmpTrapEntryIndex }
::= { ipeCfgSnmpTrapTable 1 }
IpeCfgSnmpTrapEntry ::= SEQUENCE {
ipeCfgSnmpTrapEntryIndex Integer32,
ipeCfgSnmpTrapEntryNEAddress IpAddress,
ipeCfgSnmpTrapVersion INTEGER,
ipeCfgSnmpTrapNotifyType INTEGER,
ipeCfgSnmpTrapTargetAddress IpAddress,
ipeCfgSnmpTrapTargetPort Integer32,
ipeCfgSnmpTrapSecurityName DisplayString,
ipeCfgSnmpTrapSecurityLevel INTEGER,
ipeCfgSnmpTrapEngineId OCTET STRING,
ipeCfgSnmpTrapAuthAlgorithm INTEGER,
ipeCfgSnmpTrapAuthKey DisplayString,
ipeCfgSnmpTrapPrivAlgorithm INTEGER,
ipeCfgSnmpTrapPrivKey DisplayString,
ipeCfgSnmpTrapRowStatus RowStatus
}
ipeCfgSnmpTrapEntryIndex OBJECT-TYPE
SYNTAX Integer32 (1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgSnmpTrapEntry 1 }
ipeCfgSnmpTrapEntryNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgSnmpTrapEntry 2 }
ipeCfgSnmpTrapVersion OBJECT-TYPE
SYNTAX INTEGER { invalid(0), v1(1), v2c(2), v3(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A version of this entry's notification."
::= { ipeCfgSnmpTrapEntry 3 }
ipeCfgSnmpTrapNotifyType OBJECT-TYPE
SYNTAX INTEGER { invalid(0), trap(1), inform(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "A notification type of this entry's notification."
::= { ipeCfgSnmpTrapEntry 4 }
ipeCfgSnmpTrapTargetAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Destination IP address of this entry's notification.
The following address can't be used.
127.0.0.0/8 Loopback
0.0.0.0/0 Current network
224.0.0.0/4 Multicasts (former Class D)
240.0.0.0/4 Reserved (former Class E)"
::= { ipeCfgSnmpTrapEntry 5 }
ipeCfgSnmpTrapTargetPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination UDP port this entry's notification."
::= { ipeCfgSnmpTrapEntry 6 }
ipeCfgSnmpTrapSecurityName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A security name.
The meaning is different depending on ipeCfgSnmpTrapVersion.
v1/v2c : It's meaning a community name.
v3 : It's meaning a user name.
Please use ASCII code.
The characters which can be used are '-', '_','0'-'9', 'a'-'z'
and 'A'-'Z'.
When there was the same combination to the other index,
ipeCfgSnmpTrapSecurityName and ipeCfgSnmpTrapEngineId become
error."
::= { ipeCfgSnmpTrapEntry 7 }
ipeCfgSnmpTrapSecurityLevel OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
noAuthNoPriv(1),
authNoPriv(2),
authPriv(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A security level of this entry's notification.
When ipeCfgSnmpTrapVersion is v1(1) or v2c(2), you have to SET
noAuthNoPriv(1)."
::= { ipeCfgSnmpTrapEntry 8 }
ipeCfgSnmpTrapEngineId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(5..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A snmpEngineID which this entry's notification uses.(5-32 octet)
ipeCfgSnmpTrapNotifyType is effective only at the time of
inform(2).
A snmpEngineID of a destination SNMP entity.
When there was the same combination to the other index,
ipeCfgSnmpTrapSecurityName and ipeCfgSnmpTrapEngineId become
error."
::= { ipeCfgSnmpTrapEntry 9 }
ipeCfgSnmpTrapAuthAlgorithm OBJECT-TYPE
SYNTAX INTEGER { invalid(0), md5(1), sha(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Authentication protocol.
ipeCfgSnmpTrapNotifyType is effective for the SET only at the
time of inform(2). Even if it is done SET in the case of trap(1),
I am ignored. In addition, a value of
ipeCfgAccountUserSnmpV3AuthAlgorithm is acquired at time to get."
::= { ipeCfgSnmpTrapEntry 10 }
ipeCfgSnmpTrapAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(8..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Authenticate password for SNMP inform PDU.
This object expects encrypted password by blowfish, not original
password. Therefore, the size of this object is not same as
original password size (8..31).
When the object 'ipeCfgSnmpTrapNotifyType' is trap(1), SET
request is not processed (discarded), and GET request returns the
same value as 'ipeCfgAccountUserSnmpV3AuthKey'."
::= { ipeCfgSnmpTrapEntry 11 }
ipeCfgSnmpTrapPrivAlgorithm OBJECT-TYPE
SYNTAX INTEGER { invalid(0), des(1), aes(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"privacy protocol.
ipeCfgSnmpTrapNotifyType is effective for the SET only at the
time of inform(2). Even if it is done SET in the case of trap(1),
I am ignored. In addition, a value of
ipeCfgAccountUserSnmpV3PrivAlgorithm is acquired at time to get."
::= { ipeCfgSnmpTrapEntry 12 }
ipeCfgSnmpTrapPrivKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(8..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Privacy password for SNMP inform PDU.
This object expects encrypted password by blowfish, not original
password. Therefore, the size of this object is not same as
orignal password size (8..31).
When the object 'ipeCfgSnmpTrapNotifyType' is trap(1), SET
request is not processed (discarded), and GET request returns the
same value as 'ipeCfgAccountUserSnmpV3PrivKey'."
::= { ipeCfgSnmpTrapEntry 13 }
ipeCfgSnmpTrapRowStatus OBJECT-TYPE
SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowStatus has a status only active(1).
You can SET only createAndGo(4) or destroy(6).
1) how to create
1.1) SNMPv1/v2c
To create a new row, you must SET objects indicated below.
ipeCfgSnmpTrapEntryIndex, ipeCfgSnmpTrapVersion,
ipeCfgSnmpTrapNotifyType, ipeCfgSnmpTrapTargetAddress,
ipeCfgSnmpTrapTargetV6Address,
ipeCfgSnmpTrapTargetAddressType(*), ipeCfgSnmpTrapTaergetPort,
ipeCfgSnmpTrapSecurityName
ipeCfgSnmpTrapRowStatus # Only createAndGo(4).
It isn't necessary to set ipeCfgSnmpTrapSecurityLevel. When set
it, the value is checked, so all except for noAuthNoPriv (1) will
be NG.
And, the other object is not necessary. Even if it is done SET,
it is checked the value, but ignored.
1.2) SNMPv3 (ipeCfgSnmpTrapNotifyType = trap(1))
ipeCfgSnmpTrapVersion, ipeCfgSnmpTrapNotifyType,
ipeCfgSnmpTrapTargetAddress, ipeCfgSnmpTrapTargetV6Address,
ipeCfgSnmpTrapTargetAddressType(*), ipeCfgSnmpTrapTaergetPort,
ipeCfgSnmpTrapSecurityName
ipeCfgSnmpTrapRowStatus # Only createAndGo(4).
Other object is not necessary. Even if it is done SET, it is
checked the value, but ignored.
1.3) SNMPv3 (ipeCfgSnmpTrapNotifyType = inform(2))
To create a new row, you must SET objects indicated below.
ipeCfgSnmpTrapVersion, ipeCfgSnmpTrapNotifyType,
ipeCfgSnmpTrapTargetAddress, ipeCfgSnmpTrapTargetV6Address,
ipeCfgSnmpTrapTargetAddressType(*), ipeCfgSnmpTrapTaergetPort,
ipeCfgSnmpTrapSecurityName, ipeCfgSnmpTrapSecurityLevel,
ipeCfgSnmpTrapEngineId, ipeCfgSnmpTrapAuthAlgorithm,
ipeCfgSnmpTrapAuthKey, ipeCfgSnmpTrapPrivAlgorithm,
ipeCfgSnmpTrapPrivKey
ipeCfgSnmpTrapRowStatus # Only createAndGo(4).
* NOT for EX CPRI
ipeCfgSnmpTrapEntryIndex is an index of this entry.
2) how to destroy
To destroy a exist row, you must SET a destory(6) to
ipeCfgSnmpCommunityRowStatus.
3) how to modify
It is not possible.
Please destroy a exist row, and create a new row."
::= { ipeCfgSnmpTrapEntry 14 }
ipeCfgAccount OBJECT IDENTIFIER
::= { ipeConfigurationGroup 12 }
ipeCfgAccountUserInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgAccountUserInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of user Information."
::= { ipeCfgAccount 1 }
ipeCfgAccountUserInfoEntry OBJECT-TYPE
SYNTAX IpeCfgAccountUserInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of user information."
INDEX { ipeCfgAccountUserIndex }
::= { ipeCfgAccountUserInfoTable 1 }
IpeCfgAccountUserInfoEntry ::= SEQUENCE {
ipeCfgAccountUserIndex Integer32,
ipeCfgAccountUserNEAddress IpAddress,
ipeCfgAccountUserName DisplayString,
ipeCfgAccountUserKey DisplayString,
ipeCfgAccountUserGroup DisplayString,
ipeCfgAccountUserSnmpV3SecurityLevel INTEGER,
ipeCfgAccountUserSnmpV3AuthAlgorithm INTEGER,
ipeCfgAccountUserSnmpV3AuthKey DisplayString,
ipeCfgAccountUserSnmpV3PrivAlgorithm INTEGER,
ipeCfgAccountUserSnmpV3PrivKey DisplayString,
ipeCfgAccountUserRowStatus RowStatus
}
ipeCfgAccountUserIndex OBJECT-TYPE
SYNTAX Integer32 (1..102)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgAccountUserInfoEntry 1 }
ipeCfgAccountUserNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgAccountUserInfoEntry 2 }
ipeCfgAccountUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User Name.
An overlap of a user name isn't permitted.
Please use ASCII code.
The characters which can be used are '-', '_','0'-'9', 'a'-'z'
and 'A'-'Z'."
::= { ipeCfgAccountUserInfoEntry 3 }
ipeCfgAccountUserKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(8..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User password encrypted by blowfish.
Acceptable characters for this object is shown below.
'-', '_','0'-'9', 'a'-'z' and 'A'-'Z'."
::= { ipeCfgAccountUserInfoEntry 4 }
ipeCfgAccountUserGroup OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the privilege for the user.
Acceptable characters for this object is shown below.
'-', '_','0'-'9', 'a'-'z' and 'A'-'Z'."
::= { ipeCfgAccountUserInfoEntry 5 }
ipeCfgAccountUserSnmpV3SecurityLevel OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
noAuthNoPriv(1),
authNoPriv(2),
authPriv(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SNMPv3 security level.
Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is
inapplicable)"
::= { ipeCfgAccountUserInfoEntry 6 }
ipeCfgAccountUserSnmpV3AuthAlgorithm OBJECT-TYPE
SYNTAX INTEGER { invalid(0), md5(1), sha(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Hash calculate algorithm of authenticate password.
Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is
inapplicable)"
::= { ipeCfgAccountUserInfoEntry 7 }
ipeCfgAccountUserSnmpV3AuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(8..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Authenticate password for SNMP SET/GET/TRAP PDU.
This object expects encrypted password by blowfish, not original
password. Therefore, the size of this object is not same as
orignal password (8..31).
When the object 'ipeCfgSnmpTrapNotifyType' is set to inform(2),
the INFORM PDU Authenticate key is configured by
'ipeCfgSnmpTrapAuthKey'."
::= { ipeCfgAccountUserInfoEntry 8 }
ipeCfgAccountUserSnmpV3PrivAlgorithm OBJECT-TYPE
SYNTAX INTEGER { invalid(0), des(1), aes(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Cipher algorithm.
Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is
inapplicable)"
::= { ipeCfgAccountUserInfoEntry 9 }
ipeCfgAccountUserSnmpV3PrivKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(8..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Privacy password for SNMP SET/GET/TRAP PDU.
This object expects encrypted password by blowfish, not original
password. Therefore, the size of this object is not same as
orignal password (8..31).
When the 'ipeCfgSnmpTrapNotifyType' is set to inform(2), the
INFORM PDU Authenticate key is configured by
'ipeCfgSnmpTrapAuthKey'."
::= { ipeCfgAccountUserInfoEntry 10 }
ipeCfgAccountUserRowStatus OBJECT-TYPE
SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowStatus has a status only active(1).
1) creating a entry
When you make a new entry, you must SET objects indicated below.
ipeCfgAccountUserIndex
ipeCfgAccountUserName
ipeCfgAccountUserKey
ipeCfgAccountUserGroup
ipeCfgAccountUserSnmpV3SecurityLevel
ipeCfgAccountUserSnmpV3AuthAlgorithm
ipeCfgAccountUserSnmpV3AuthKey
ipeCfgAccountUserSnmpV3PrivAlgorithm
ipeCfgAccountUserSnmpV3PrivKey
ipeCfgAccountUserRowStatus <- createAndGo(4)
2) modifing a entry
ipeCfgAccountUserKey can only be changed.
Other items can not be updated. Please do destroy of entry and a
create.
3) deleting a entry
When you SET a destroy(6) to ipeCfgAccountUserRowStatus, the
entry is destroyed.
4) About SNMPv3
When there is not ipeCfgAccountGroupInfoEntry corresponding to
ipeCfgAccountUserGroup, SNMPv3-TRAP which I used
ipeCfgAccountUserName for is output, but cannot use
SNMPv3-Set/Get-Request."
::= { ipeCfgAccountUserInfoEntry 11 }
ipeCfgAccountGroupInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgAccountGroupInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Group Information."
::= { ipeCfgAccount 2 }
ipeCfgAccountGroupInfoEntry OBJECT-TYPE
SYNTAX IpeCfgAccountGroupInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of Group Information."
INDEX { ipeCfgAccountGroupIndex }
::= { ipeCfgAccountGroupInfoTable 1 }
IpeCfgAccountGroupInfoEntry ::= SEQUENCE {
ipeCfgAccountGroupIndex Integer32,
ipeCfgAccountGroupNEAddress IpAddress,
ipeCfgAccountGroupName DisplayString,
ipeCfgAccountGroupTelnet INTEGER,
ipeCfgAccountGroupSsh INTEGER,
ipeCfgAccountGroupFtp INTEGER,
ipeCfgAccountGroupSftp INTEGER,
ipeCfgAccountGroupHttp INTEGER,
ipeCfgAccountGroupHttps INTEGER,
ipeCfgAccountGroupSnmp INTEGER,
ipeCfgAccountGroupAccessLevel INTEGER,
ipeCfgAccountGroupRowStatus RowStatus
}
ipeCfgAccountGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgAccountGroupInfoEntry 1 }
ipeCfgAccountGroupNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgAccountGroupInfoEntry 2 }
ipeCfgAccountGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Group name.
An overlap of a group name isn't permitted.
Please use ASCII code.
The characters which can be used are '-', '_','0'-'9', 'a'-'z'
and 'A'-'Z'."
::= { ipeCfgAccountGroupInfoEntry 3 }
ipeCfgAccountGroupTelnet OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "TELNET enable."
::= { ipeCfgAccountGroupInfoEntry 4 }
ipeCfgAccountGroupSsh OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SSH enable."
::= { ipeCfgAccountGroupInfoEntry 5 }
ipeCfgAccountGroupFtp OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "FTP enable."
::= { ipeCfgAccountGroupInfoEntry 6 }
ipeCfgAccountGroupSftp OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SFTP enable."
::= { ipeCfgAccountGroupInfoEntry 7 }
ipeCfgAccountGroupHttp OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "HTTP enable."
::= { ipeCfgAccountGroupInfoEntry 8 }
ipeCfgAccountGroupHttps OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "HTTPS enable."
::= { ipeCfgAccountGroupInfoEntry 9 }
ipeCfgAccountGroupSnmp OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disabled(1), enabled(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SNMP enable."
::= { ipeCfgAccountGroupInfoEntry 10 }
ipeCfgAccountGroupAccessLevel OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
operatorLevel(1),
configLevel(2),
adminLevel(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Access level."
::= { ipeCfgAccountGroupInfoEntry 11 }
ipeCfgAccountGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowStatus has a status only 'active(1)'.
1) creating a entry.
When you make a new entry, you must SET objects indicated below.
ipeCfgAccountGroupName
ipeCfgAccountGroupTelnet
ipeCfgAccountGroupSsh
ipeCfgAccountGroupFtp
ipeCfgAccountGroupSftp
ipeCfgAccountGroupHttp
ipeCfgAccountGroupHttps
ipeCfgAccountGroupSnmp
ipeCfgAccountGroupAccessLevel
ipeCfgAccountGroupRowStatus <- createAndGo(4)
ipeCfgAccountGroupIndex is an index of this entry.
2) deleting a entry.
When you SET a destroy(6) to ipeCfgAccountGroupRowStatus, the
entry is destroyed.
Information that synchronizes and is deleted:
User Information setting(ssh/ftp/http login information)
SNMPv3-Set/Get-Req user info
(The SNMPv3-TRAP information is left)
3) modifing a entry
It can change it other than ipeCfgAccountGroupName,
ipeCfgAccountGroupRowStatus.
But the entry of default (ADMIN/OPERATOR/CONFIG) is impossible of
a change ipeCfgAccountGroupName."
::= { ipeCfgAccountGroupInfoEntry 12 }
ipeCfgUserAccountAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgUserAccountAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configure user authentication method about Web LCT."
::= { ipeCfgAccount 4 }
ipeCfgUserAccountAuthEntry OBJECT-TYPE
SYNTAX IpeCfgUserAccountAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "..."
INDEX { ipeCfgUserAccountAuthIndex }
::= { ipeCfgUserAccountAuthTable 1 }
IpeCfgUserAccountAuthEntry ::= SEQUENCE {
ipeCfgUserAccountAuthIndex Integer32,
ipeCfgUserAccountAuthNEAddress IpAddress,
ipeCfgUserAccountAuthMode INTEGER,
ipeCfgUserAccountAuthOrder INTEGER,
ipeCfgUserAccountAuthTrapEnable INTEGER,
ipeCfgUserAccountAuthTrapLocal INTEGER,
ipeCfgUserAccountAuthTrapExternal INTEGER
}
ipeCfgUserAccountAuthIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgUserAccountAuthEntry 1 }
ipeCfgUserAccountAuthNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Reserved object for northbound interface."
::= { ipeCfgUserAccountAuthEntry 2 }
ipeCfgUserAccountAuthMode OBJECT-TYPE
SYNTAX INTEGER { invalid(0), mode1(1), mode2(2), mode3(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the user authentication mode.
mode1 : local authentication only.
mode2 : local and LDAP authentication. (NOT SUPPORTED)
mode3 : local and RADIUS authentication.
mode2 will be supprted in future version."
DEFVAL { mode1 }
::= { ipeCfgUserAccountAuthEntry 3 }
ipeCfgUserAccountAuthOrder OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
localAuthFirst(1),
externalAuthFirst(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate the user authentication order.
This object is effective only if ipeCfgUserAccountAuthMode
is set to mode2 or mode3.
External authentication means authentication with RADIUS or
LDAP.
localAuthFirst : local -> external
externalAuthFirst : external -> local"
DEFVAL { localAuthFirst }
::= { ipeCfgUserAccountAuthEntry 4 }
ipeCfgUserAccountAuthTrapEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disable(1), enable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable user login trap.
In case this object is set to enable, the system sends trap
when user attempt to login to Web LCT."
DEFVAL { enable }
::= { ipeCfgUserAccountAuthEntry 5 }
ipeCfgUserAccountAuthTrapLocal OBJECT-TYPE
SYNTAX INTEGER { invalid(0), success(1), failure(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate authentication result of local authentication.
This object is dedicated for login control trap.
If you read this object, the system returns invalid(0)."
DEFVAL { invalid }
::= { ipeCfgUserAccountAuthEntry 6 }
ipeCfgUserAccountAuthTrapExternal OBJECT-TYPE
SYNTAX INTEGER { invalid(0), success(1), failure(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate authentication result of externel authentication.
This object is dedicated for login control trap.
If you read this object, the system returns invalid(0)."
DEFVAL { invalid }
::= { ipeCfgUserAccountAuthEntry 7 }
ipeCfgDhcpGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 13 }
ipeCfgDhcpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgDhcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DHCPserver table."
::= { ipeCfgDhcpGroup 1 }
ipeCfgDhcpServerEntry OBJECT-TYPE
SYNTAX IpeCfgDhcpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of DHCPserver table."
INDEX { ipeCfgDhcpServerIndex }
::= { ipeCfgDhcpServerTable 1 }
IpeCfgDhcpServerEntry ::= SEQUENCE {
ipeCfgDhcpServerIndex Integer32,
ipeCfgDhcpServerNEAddress IpAddress,
ipeCfgDhcpServerEnable INTEGER,
ipeCfgDhcpLeaseAddrRangeBegin IpAddress,
ipeCfgDhcpLeaseAddrRangeEnd IpAddress
}
ipeCfgDhcpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgDhcpServerEntry 1 }
ipeCfgDhcpServerNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgDhcpServerEntry 2 }
ipeCfgDhcpServerEnable OBJECT-TYPE
SYNTAX INTEGER { start(1), stop(2), restart(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Effective/invalid setting of DHCP.
value range:start(1)
stop(2)
restart(3)
DHCPD has already started. When the start is specified, DHCPD
restart."
::= { ipeCfgDhcpServerEntry 3 }
ipeCfgDhcpLeaseAddrRangeBegin OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Beginning IPaddress within the range of lease address.
value range:Dotted decimal notation
denial value:0.0.0.0 , 127.0.0.1 , 255.255.255.255
ipeCfgDhcpLeaseAddrRangeBegin don't same as
ipeCfgPortLctIpAddress value"
::= { ipeCfgDhcpServerEntry 4 }
ipeCfgDhcpLeaseAddrRangeEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"End IPaddress within the range of lease address.
value range:Dotted decimal notation
denial value:0.0.0.0 , 127.0.0.1 , 255.255.255.255
ipeCfgDhcpLeaseAddrRangeEnd don't same as ipeCfgPortLctIpAddress
value"
::= { ipeCfgDhcpServerEntry 5 }
ipeCfgStpGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 14 }
ipeCfgStpBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgStpBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "STP state setting table."
::= { ipeCfgStpGroup 1 }
ipeCfgStpBridgeEntry OBJECT-TYPE
SYNTAX IpeCfgStpBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of STP state setting table."
INDEX { ipeCfgStpBridgeIndex }
::= { ipeCfgStpBridgeTable 1 }
IpeCfgStpBridgeEntry ::= SEQUENCE {
ipeCfgStpBridgeIndex Integer32,
ipeCfgStpBridgeNEAddress IpAddress,
ipeCfgStpEnable INTEGER,
ipeCfgStpPriority Integer32,
ipeCfgStpBridgeMaxAge Timeout,
ipeCfgStpBridgeHelloTime Timeout,
ipeCfgStpBridgeForwardDelay Timeout
}
ipeCfgStpBridgeIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgStpBridgeEntry 1 }
ipeCfgStpBridgeNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgStpBridgeEntry 2 }
ipeCfgStpEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Effective/invalid setting of STP.
value :enabled
disabled"
::= { ipeCfgStpBridgeEntry 3 }
ipeCfgStpPriority OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Bridge priority.
value range:0 to 65535"
::= { ipeCfgStpBridgeEntry 4 }
ipeCfgStpBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout (600..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MaxAge (in units of hundredths of a second).
value range:600 to 4000
rule: 2 * (ipeCfgStpBridgeForwardDelay - 1) =>
ipeCfgStpBridgeMaxAge
ipeCfgStpBridgeMaxAge >= 2 * (ipeCfgStpBridgeHelloTime + 1)"
::= { ipeCfgStpBridgeEntry 5 }
ipeCfgStpBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout (100..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"HelloTime (in units of hundredths of a second).
value range:100 to 1000
rule:ipeCfgStpBridgeMaxAge >= 2x(ipeCfgStpBridgeHelloTime + 1)"
::= { ipeCfgStpBridgeEntry 6 }
ipeCfgStpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ForwardDelay (in units of hundredths of a second).
value range:400 to 3000
rule: 2 * (ipeCfgStpBridgeForwardDelay - 1) >=
ipeCfgStpBridgeMaxAge"
::= { ipeCfgStpBridgeEntry 7 }
ipeCfgStpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "STP port information table."
::= { ipeCfgStpGroup 2 }
ipeCfgStpPortEntry OBJECT-TYPE
SYNTAX IpeCfgStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of STP port information table."
INDEX { ipeCfgStpPortIfIndex }
::= { ipeCfgStpPortTable 1 }
IpeCfgStpPortEntry ::= SEQUENCE {
ipeCfgStpPortIfIndex InterfaceIndex,
ipeCfgStpPortNEAddress IpAddress,
ipeCfgStpPortPriority Integer32,
ipeCfgStpPortPathCost Integer32,
ipeCfgStpPortEdgeEnable INTEGER
}
ipeCfgStpPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgStpPortEntry 1 }
ipeCfgStpPortNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgStpPortEntry 2 }
ipeCfgStpPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port priority.
value range:0 to 63"
::= { ipeCfgStpPortEntry 3 }
ipeCfgStpPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Pathcost.
value range:1 to 65535"
::= { ipeCfgStpPortEntry 4 }
ipeCfgStpPortEdgeEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Effective/invalid setting of BPDU.
value range:enabled(1)
disabled(2)"
::= { ipeCfgStpPortEntry 5 }
ipeCfgPortGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 15 }
ipeCfgPortModemTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgPortModemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MODEM port set up information table."
::= { ipeCfgPortGroup 1 }
ipeCfgPortModemEntry OBJECT-TYPE
SYNTAX IpeCfgPortModemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of MODEM port set up information table."
INDEX { ipeCfgPortModemIfIndex }
::= { ipeCfgPortModemTable 1 }
IpeCfgPortModemEntry ::= SEQUENCE {
ipeCfgPortModemIfIndex InterfaceIndex,
ipeCfgPortModemNEAddress IpAddress,
ipeCfgPortModemEnable INTEGER
}
ipeCfgPortModemIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgPortModemEntry 1 }
ipeCfgPortModemNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgPortModemEntry 2 }
ipeCfgPortModemEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Effective/invalid setting of MODEM port.
value range: enabled(1)
disabled(2)"
::= { ipeCfgPortModemEntry 3 }
ipeCfgPortLctTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgPortLctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "LCT port set up information table."
::= { ipeCfgPortGroup 2 }
ipeCfgPortLctEntry OBJECT-TYPE
SYNTAX IpeCfgPortLctEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of LCT port set up information table."
INDEX { ipeCfgPortLctIfIndex }
::= { ipeCfgPortLctTable 1 }
IpeCfgPortLctEntry ::= SEQUENCE {
ipeCfgPortLctIfIndex InterfaceIndex,
ipeCfgPortLctNEAddress IpAddress,
ipeCfgPortLctIpAddress IpAddress,
ipeCfgPortLctNetMask IpAddress,
ipeCfgPortLctEnable INTEGER,
ipeCfgPortLctMtu Integer32,
ipeCfgPortLctAutoNeg INTEGER
}
ipeCfgPortLctIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgPortLctEntry 1 }
ipeCfgPortLctNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgPortLctEntry 2 }
ipeCfgPortLctIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPaddress of LCT port.
It makes an error of the Internet Protocol address setting that
overlaps in the port in the device.
The object port and the range of the value are described as
follows.
Object port: Lct, InbandMngVLAN1-16, Bridge1-Bridge20, NE2
Value range:0x00000000-0xdfffffff(0.0.0.0-223.255.255.255)
The relation is not in the state and the number of Branch of
interfaces and the Internet Protocol address repetition check is
checked.
When 0.0.0.0 is set to ipeCfgPortLctIpAddress, it becomes an
Internet Protocol address deletion."
::= { ipeCfgPortLctEntry 3 }
ipeCfgPortLctNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subnet mask of LCT port.
When it isn't proper as subnetmask, it'll be an error.
Value range:0x00000000-0xfffffffc(0-30bit)"
::= { ipeCfgPortLctEntry 4 }
ipeCfgPortLctEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Effective/invalid setting of LCT port.
value range: enabled
disabled"
::= { ipeCfgPortLctEntry 5 }
ipeCfgPortLctMtu OBJECT-TYPE
SYNTAX Integer32 (256..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MTU value of LCT.
value range:256 to 1500"
::= { ipeCfgPortLctEntry 6 }
ipeCfgPortLctAutoNeg OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Effective/invalid setting of LCT AUTO NEGOTIATION.
value range: enabled
disabled"
::= { ipeCfgPortLctEntry 7 }
ipeCfgPortEtherTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgPortEtherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NMS/NE1 port set up information table."
::= { ipeCfgPortGroup 3 }
ipeCfgPortEtherEntry OBJECT-TYPE
SYNTAX IpeCfgPortEtherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of NMS/NE1 port set up information table."
INDEX { ipeCfgPortEtherIfIndex }
::= { ipeCfgPortEtherTable 1 }
IpeCfgPortEtherEntry ::= SEQUENCE {
ipeCfgPortEtherIfIndex InterfaceIndex,
ipeCfgPortEtherNEAddress IpAddress,
ipeCfgPortEtherEnable INTEGER,
ipeCfgPortEtherAutoNeg INTEGER,
ipeCfgPortEtherSpecialFilter INTEGER,
ipeCfgPortEtherLldpMode INTEGER
}
ipeCfgPortEtherIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgPortEtherEntry 1 }
ipeCfgPortEtherNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgPortEtherEntry 2 }
ipeCfgPortEtherEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Effective/invalid setting of NMS/NE1 port.
value range: enabled(1)
disabled(2)"
DEFVAL { enabled }
::= { ipeCfgPortEtherEntry 3 }
ipeCfgPortEtherAutoNeg OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Auto negotiation invalid effective/setting of NMS/NE1 port.
value range: enabled(1)
disabled(2)"
::= { ipeCfgPortEtherEntry 4 }
ipeCfgPortEtherSpecialFilter OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of whether a special broadcast packet is blocked."
::= { ipeCfgPortEtherEntry 5 }
ipeCfgPortEtherLldpMode OBJECT-TYPE
SYNTAX INTEGER { invalid(0), standardMode(1), proprietaryMode(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch to select MAC address of LLDP Frame.
standardMode : MAC address of LLDP Frame is
01-80-C2-00-00-0E.
proprietaryMode : MAC address of LLDP Frame is configured in
ipeCfgLldpProprietaryModeMacAddress."
DEFVAL { standardMode }
::= { ipeCfgPortEtherEntry 6 }
ipeCfgPortNe2Table OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgPortNe2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NE2 port set up information table."
::= { ipeCfgPortGroup 4 }
ipeCfgPortNe2Entry OBJECT-TYPE
SYNTAX IpeCfgPortNe2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of NE2 port set up information table."
INDEX { ipeCfgPortNe2IfIndex }
::= { ipeCfgPortNe2Table 1 }
IpeCfgPortNe2Entry ::= SEQUENCE {
ipeCfgPortNe2IfIndex InterfaceIndex,
ipeCfgPortNe2NEAddress IpAddress,
ipeCfgPortNe2IpAddress IpAddress,
ipeCfgPortNe2Enable INTEGER,
ipeCfgPortNe2Speed INTEGER,
ipeCfgPortNe2NeighborMibEnable INTEGER
}
ipeCfgPortNe2IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgPortNe2Entry 1 }
ipeCfgPortNe2NEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgPortNe2Entry 2 }
ipeCfgPortNe2IpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NE2 port IP Address.
value range:0x00000000 - 0xdfffffff(0.0.0.0 - 223.255.255.255)
The ppp function is restarted when setting it."
::= { ipeCfgPortNe2Entry 3 }
ipeCfgPortNe2Enable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NE2 port enable.
value range:enabled(1)
disabled(2)"
::= { ipeCfgPortNe2Entry 4 }
ipeCfgPortNe2Speed OBJECT-TYPE
SYNTAX INTEGER { speed9600(9600), speed19200(19200) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NE2 port baud rate.
value range:9600bps(9600)
19200bps(19200)
The ppp function is restarted when setting it."
::= { ipeCfgPortNe2Entry 5 }
ipeCfgPortNe2NeighborMibEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NE2 port neighbor detection enable.
value range:enabled(1)
disabled(2)
The ppp function is restarted when setting it."
::= { ipeCfgPortNe2Entry 6 }
ipeCfgPortE1Table OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgPortE1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "E1 port set up information table."
::= { ipeCfgPortGroup 5 }
ipeCfgPortE1Entry OBJECT-TYPE
SYNTAX IpeCfgPortE1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of E1 port set up information table."
INDEX { ipeCfgPortE1IfIndex }
::= { ipeCfgPortE1Table 1 }
IpeCfgPortE1Entry ::= SEQUENCE {
ipeCfgPortE1IfIndex InterfaceIndex,
ipeCfgPortE1NEAddress IpAddress,
ipeCfgPortE1Enable INTEGER,
ipeCfgPortE1ChannelNumber Integer32
}
ipeCfgPortE1IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgPortE1Entry 1 }
ipeCfgPortE1NEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgPortE1Entry 2 }
ipeCfgPortE1Enable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Effective/invalid setting of E1 port.
value range: enabled(1)
disabled(2)"
::= { ipeCfgPortE1Entry 3 }
ipeCfgPortE1ChannelNumber OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use channel of E1 port.
value range:1 to 16"
::= { ipeCfgPortE1Entry 4 }
ipeCfgPortInbandTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgPortInbandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"InBand Management VLAN port set up information table."
::= { ipeCfgPortGroup 6 }
ipeCfgPortInbandEntry OBJECT-TYPE
SYNTAX IpeCfgPortInbandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"entry of INBAND Management VLAN port set up information table."
INDEX { ipeCfgPortInbandIfIndex }
::= { ipeCfgPortInbandTable 1 }
IpeCfgPortInbandEntry ::= SEQUENCE {
ipeCfgPortInbandIfIndex InterfaceIndex,
ipeCfgPortInbandNEAddress IpAddress,
ipeCfgPortInbandIpAddress IpAddress,
ipeCfgPortInbandNetMask IpAddress,
ipeCfgPortInbandEnable INTEGER,
ipeCfgPortInbandVlanId Integer32,
ipeCfgPortInbandMtu Integer32,
ipeCfgPortInbandCos Integer32
}
ipeCfgPortInbandIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgPortInbandEntry 1 }
ipeCfgPortInbandNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgPortInbandEntry 2 }
ipeCfgPortInbandIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"IPaddress of INBAND Management VLAN port.
It makes an error of the Internet Protocol address setting that
overlaps in the port in the device.
The object port and the range of the value are described as
follows.
Object port: Lct, InbandMngVLAN1-16, Bridge1-20, NE2
Value range: 0x00000000 - 0xdfffffff(0.0.0.0 - 223.255.255.255)
The relation is not in the state and the number of Branch of
interfaces and the Internet Protocol address repetition check is
checked.
When 0.0.0.0 is set to ipeCfgPortInbandIpAddress, it becomes an
Internet Protocol address deletion."
::= { ipeCfgPortInbandEntry 3 }
ipeCfgPortInbandNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Subnet mask of INBAND Management VLAN port.
When it isn't proper as subnetmask, it'll be an error.
Value range:0x00000000 - 0xfffffffc(0 - 30bit)"
::= { ipeCfgPortInbandEntry 4 }
ipeCfgPortInbandEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Effective/invalid setting of INBAND Management VLAN port.
value range: enabled(1)
disabled(2)"
::= { ipeCfgPortInbandEntry 5 }
ipeCfgPortInbandVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN ID of INBAND Management VLAN port.
value range:1 to 4094"
::= { ipeCfgPortInbandEntry 6 }
ipeCfgPortInbandMtu OBJECT-TYPE
SYNTAX Integer32 (256..1500)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"MTU value of INBAND Management VLAN port.
value range:256 to 1500"
::= { ipeCfgPortInbandEntry 7 }
ipeCfgPortInbandCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "CoS value of INBAND Management VLAN port"
DEFVAL { 7 }
::= { ipeCfgPortInbandEntry 8 }
ipeCfgPortMainEtherTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgPortMainEtherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Main traffic ether port set up information table."
::= { ipeCfgPortGroup 7 }
ipeCfgPortMainEtherEntry OBJECT-TYPE
SYNTAX IpeCfgPortMainEtherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"entry of main traffic ether port set up information table."
INDEX { ipeCfgPortMainEtherIfIndex }
::= { ipeCfgPortMainEtherTable 1 }
IpeCfgPortMainEtherEntry ::= SEQUENCE {
ipeCfgPortMainEtherIfIndex InterfaceIndex,
ipeCfgPortMainEtherNEAddress IpAddress,
ipeCfgPortMainEtherLldpMode INTEGER
}
ipeCfgPortMainEtherIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgPortMainEtherEntry 1 }
ipeCfgPortMainEtherNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgPortMainEtherEntry 2 }
ipeCfgPortMainEtherLldpMode OBJECT-TYPE
SYNTAX INTEGER { invalid(0), standardMode(1), proprietaryMode(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch to select MAC address of LLDP Frame.
standardMode : MAC address of LLDP Frame is 01-80-C2-00-00-0E.
proprietaryMode : MAC address of LLDP Frame is configured in
ipeCfgLldpProprietaryModeMacAddress."
DEFVAL { standardMode }
::= { ipeCfgPortMainEtherEntry 3 }
ipeCfgBridgeGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 16 }
ipeCfgBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Bridge set up information table."
::= { ipeCfgBridgeGroup 1 }
ipeCfgBridgeEntry OBJECT-TYPE
SYNTAX IpeCfgBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of Bridge set up information table."
INDEX { ipeCfgBridgeIndex }
::= { ipeCfgBridgeTable 1 }
IpeCfgBridgeEntry ::= SEQUENCE {
ipeCfgBridgeIndex Integer32,
ipeCfgBridgeNEAddress IpAddress,
ipeCfgBridgeIpAddress IpAddress,
ipeCfgBridgeNetMask IpAddress,
ipeCfgBridgeMtu Integer32
}
ipeCfgBridgeIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgBridgeEntry 1 }
ipeCfgBridgeNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgBridgeEntry 2 }
ipeCfgBridgeIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPAddress set to bridge.
Value range:0x00000000 - 0xdfffffff(0.0.0.0 - 223.255.255.255)
It makes an error of the Internet Protocol address setting that
overlaps in the port in the device.
It becomes the following about the port of the Internet Protocol
address repetition check object.
Object port: Lct, InbandMngVLAN1-16, Bridge1-Bridge20, NE2
The relation is not in the state and the number of Branch of
interfaces and the Internet Protocol address repetition check is
checked.
There can not be relation and it sets, and it refer the number of
branch.
When 0.0.0.0 is set to ipeCfgBridgeIpAddress, it becomes an
Internet Protocol address deletion."
::= { ipeCfgBridgeEntry 3 }
ipeCfgBridgeNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Netmask set to bridge.
When it isn't proper as subnetmask, it'll be an error.
Value range:0x00000000 - 0xfffffffc(0 - 30bit)
There can not be relation and it sets, and it refer the number of
branch."
::= { ipeCfgBridgeEntry 4 }
ipeCfgBridgeMtu OBJECT-TYPE
SYNTAX Integer32 (256..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MTU value of bridge.
value range:256 to 1500
There can not be relation and it sets, and it refer the number of
branch."
::= { ipeCfgBridgeEntry 5 }
ipeCfgBridgePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgBridgePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Bridge set up information table."
::= { ipeCfgBridgeGroup 2 }
ipeCfgBridgePortEntry OBJECT-TYPE
SYNTAX IpeCfgBridgePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of Bridge set up information table."
INDEX { ipeCfgBridgePortIfIndex }
::= { ipeCfgBridgePortTable 1 }
IpeCfgBridgePortEntry ::= SEQUENCE {
ipeCfgBridgePortIfIndex InterfaceIndex,
ipeCfgBridgePortNEAddress IpAddress,
ipeCfgBridgePortBridgeIndex Integer32
}
ipeCfgBridgePortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgBridgePortEntry 1 }
ipeCfgBridgePortNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgBridgePortEntry 2 }
ipeCfgBridgePortBridgeIndex OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index value of bridge."
::= { ipeCfgBridgePortEntry 3 }
ipeCfgPripGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 17 }
ipeCfgPripTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgPripEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "PRIP set up information table."
::= { ipeCfgPripGroup 1 }
ipeCfgPripEntry OBJECT-TYPE
SYNTAX IpeCfgPripEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of PRIP set up information table."
INDEX { ipeCfgPripIndex }
::= { ipeCfgPripTable 1 }
IpeCfgPripEntry ::= SEQUENCE {
ipeCfgPripIndex Integer32,
ipeCfgPripNEAddress IpAddress,
ipeCfgPripRouteEnable INTEGER,
ipeCfgPripUdpPort INTEGER
}
ipeCfgPripIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgPripEntry 1 }
ipeCfgPripNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgPripEntry 2 }
ipeCfgPripRouteEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disables PRIP.
enabled(1):PRIP is enabled.
disabled(2):PRIP is disabled."
::= { ipeCfgPripEntry 3 }
ipeCfgPripUdpPort OBJECT-TYPE
SYNTAX INTEGER { ripdefaultport(520), pripdefaultport(8520) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of UDP port number used with PRIP.
Either of 8520 or 520 is set.
This setting is valid since PRIP will start next time."
::= { ipeCfgPripEntry 4 }
ipeCfgPripPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgPripPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "PRIP set up information table.(per port)"
::= { ipeCfgPripGroup 2 }
ipeCfgPripPortEntry OBJECT-TYPE
SYNTAX IpeCfgPripPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of PRIP set up information table.(per port)"
INDEX { ipeCfgPripPortIfIndex }
::= { ipeCfgPripPortTable 1 }
IpeCfgPripPortEntry ::= SEQUENCE {
ipeCfgPripPortIfIndex InterfaceIndex,
ipeCfgPripPortNEAddress IpAddress,
ipeCfgPripPortEnable INTEGER,
ipeCfgPripPortPropagateNetEnable INTEGER
}
ipeCfgPripPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgPripPortEntry 1 }
ipeCfgPripPortNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgPripPortEntry 2 }
ipeCfgPripPortEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting of some port when PRIP will be enabled.
enabled(1) : this port is enabled.
disabled(2) : this port is disable."
::= { ipeCfgPripPortEntry 3 }
ipeCfgPripPortPropagateNetEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Propagate setting for neighbor NE.
enabled(1) : this port is propagated.
disabled(2) : this port is not propagated.
(Do not register in the RIP route.)"
::= { ipeCfgPripPortEntry 4 }
ipeCfgNaptGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 18 }
ipeCfgNaptTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgNaptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NAPT set up information table."
::= { ipeCfgNaptGroup 1 }
ipeCfgNaptEntry OBJECT-TYPE
SYNTAX IpeCfgNaptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of NAPT set up information table."
INDEX { ipeCfgNaptIndex }
::= { ipeCfgNaptTable 1 }
IpeCfgNaptEntry ::= SEQUENCE {
ipeCfgNaptIndex Integer32,
ipeCfgNaptNEAddress IpAddress,
ipeCfgNaptEnable INTEGER
}
ipeCfgNaptIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgNaptEntry 1 }
ipeCfgNaptNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgNaptEntry 2 }
ipeCfgNaptEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Address translation invalid effective/setting by NAPT.
value range: enabled
disabled"
::= { ipeCfgNaptEntry 3 }
ipeCfgStaticRouteGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 19 }
ipeCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Static Routing set up information table."
::= { ipeCfgStaticRouteGroup 1 }
ipeCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpeCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of Static Routing set up information table."
INDEX { ipeCfgRouteIndex }
::= { ipeCfgStaticRouteTable 1 }
IpeCfgStaticRouteEntry ::= SEQUENCE {
ipeCfgRouteIndex Integer32,
ipeCfgRouteNEAddress IpAddress,
ipeCfgRouteDest IpAddress,
ipeCfgRouteMask IpAddress,
ipeCfgRouteNextHop IpAddress,
ipeCfgRouteRowStatus RowStatus
}
ipeCfgRouteIndex OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgStaticRouteEntry 1 }
ipeCfgRouteNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgStaticRouteEntry 2 }
ipeCfgRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static routing object destination address.
When masking in ipeCfgRouteMask, the host address part has to be
a zero, if any.
Value range:0x00000000-0xdfffffff(0.0.0.0-223.255.255.255)
The value acquisition when unsetting it returns NoSuchObject."
::= { ipeCfgStaticRouteEntry 3 }
ipeCfgRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static routing object subnet mask.
When it isn't proper as subnetmask, it'll be an error.
Value range:0x00000000-0xffffffff(0-32bit)
Only when ipeCfgRouteDest is 0, 0bit is allowed.
The value acquisition when unsetting it returns NoSuchObject."
::= { ipeCfgStaticRouteEntry 4 }
ipeCfgRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static routing object gateway address.
Value range:0x00000001 - 0xdfffffff(0.0.0.1 - 223.255.255.255)
The value acquisition when unsetting it returns NoSuchObject."
::= { ipeCfgStaticRouteEntry 5 }
ipeCfgRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowStatus has a status only 'active(1)'.
1) creating a entry
When you make a new entry, you must SET objects indicated below.
* ipeCfgRouteDest
* ipeCfgRouteMask
* ipeCfgRouteNextHop
* ipeCfgRouteRowStatus <- createAndGo(4)
2) modifing a entry
When you make a existing entry, you must SET objects indicated
below.
* ipeCfgRouteDest
* ipeCfgRouteMask
* ipeCfgRouteNextHop
3) deleting a entry
When you SET a destroy(6) to ipeCfgRouteRowStatus, the entry is
destroyed.
* ipeCfgRouteRowStatus <- destory(6)"
::= { ipeCfgStaticRouteEntry 6 }
ipeCfgAccessListGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 21 }
ipeCfgAccessListRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgAccessListRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Access List(Rule)."
::= { ipeCfgAccessListGroup 1 }
ipeCfgAccessListRuleEntry OBJECT-TYPE
SYNTAX IpeCfgAccessListRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of Access List(Rule)."
INDEX { ipeCfgAccessListRuleEnableIndex }
::= { ipeCfgAccessListRuleTable 1 }
IpeCfgAccessListRuleEntry ::= SEQUENCE {
ipeCfgAccessListRuleEnableIndex Integer32,
ipeCfgAccessListRuleNEAddress IpAddress,
ipeCfgAccessListInputRuleEnable INTEGER,
ipeCfgAccessListForwardRuleEnable INTEGER,
ipeCfgAccessListInputDefaultAction INTEGER,
ipeCfgAccessListForwardDefaultAction INTEGER
}
ipeCfgAccessListRuleEnableIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgAccessListRuleEntry 1 }
ipeCfgAccessListRuleNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgAccessListRuleEntry 2 }
ipeCfgAccessListInputRuleEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disable(1), enable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP Access Control Input Filter Rule"
::= { ipeCfgAccessListRuleEntry 3 }
ipeCfgAccessListForwardRuleEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disable(1), enable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP Access Control Forwarding Filter Rule"
::= { ipeCfgAccessListRuleEntry 4 }
ipeCfgAccessListInputDefaultAction OBJECT-TYPE
SYNTAX INTEGER { permit(1), deny(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP Access Control Input Default Action."
::= { ipeCfgAccessListRuleEntry 5 }
ipeCfgAccessListForwardDefaultAction OBJECT-TYPE
SYNTAX INTEGER { permit(1), deny(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IP Access Control Forwarding Default Action"
::= { ipeCfgAccessListRuleEntry 6 }
ipeCfgAccessListInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgAccessListInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Access List(Input Direction)."
::= { ipeCfgAccessListGroup 2 }
ipeCfgAccessListInputEntry OBJECT-TYPE
SYNTAX IpeCfgAccessListInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of Access List(Input Direction)."
INDEX { ipeCfgAccessListInputOrderNum }
::= { ipeCfgAccessListInputTable 1 }
IpeCfgAccessListInputEntry ::= SEQUENCE {
ipeCfgAccessListInputOrderNum Integer32,
ipeCfgAccessListInputNEAddress IpAddress,
ipeCfgAccessListInputInIfIndex INTEGER,
ipeCfgAccessListInputSrcIpAddress IpAddress,
ipeCfgAccessListInputSrcNetMask IpAddress,
ipeCfgAccessListInputProtocol Integer32,
ipeCfgAccessListInputDstPortNum Integer32,
ipeCfgAccessListInputAction INTEGER,
ipeCfgAccessListInputRowStatus RowStatus
}
ipeCfgAccessListInputOrderNum OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of table(1-50)."
::= { ipeCfgAccessListInputEntry 1 }
ipeCfgAccessListInputNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgAccessListInputEntry 2 }
ipeCfgAccessListInputInIfIndex OBJECT-TYPE
SYNTAX INTEGER {
any(0),
inband(3),
ne2(4),
bridge1(11),
bridge2(12),
bridge3(13),
bridge4(14),
bridge5(15),
bridge6(16),
bridge7(17),
bridge8(18),
bridge9(19),
bridge10(20),
bridge11(21),
bridge12(22),
bridge13(23),
bridge14(24),
bridge15(25),
bridge16(26),
bridge17(27),
bridge18(28),
bridge19(29),
bridge20(30)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Input Filter Interface.
The value 'inband' is not supported."
::= { ipeCfgAccessListInputEntry 3 }
ipeCfgAccessListInputSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP Access Control Input Filter Source IP Address"
::= { ipeCfgAccessListInputEntry 4 }
ipeCfgAccessListInputSrcNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Input Filter Source Subnet Mask.
'0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as
'Any'."
::= { ipeCfgAccessListInputEntry 5 }
ipeCfgAccessListInputProtocol OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Input Filter Protocol.
'-1' acts as 'Any'."
::= { ipeCfgAccessListInputEntry 6 }
ipeCfgAccessListInputDstPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Input Filter Port Number.
'-1' acts as 'Any'."
::= { ipeCfgAccessListInputEntry 7 }
ipeCfgAccessListInputAction OBJECT-TYPE
SYNTAX INTEGER { permit(1), deny(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP Access Control Input Filter Action."
::= { ipeCfgAccessListInputEntry 8 }
ipeCfgAccessListInputRowStatus OBJECT-TYPE
SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowStatus has a status only 'active(1)'.
1) creating a entry
When you make a new entry, you must SET objects indicated below.
ipeCfgAccessListInputAction
ipeCfgAccessListInputRowStatus <- createAndGo(4)
When you are not setting a value of items as follows, it is set
as 'any'.
ipeCfgAccessListInputInIfIndex
ipeCfgAccessListInputSrcIpAddress
ipeCfgAccessListInputSrcNetMask(*1)
ipeCfgAccessListInputProtocol
ipeCfgAccessListInputDstPortNum(*2)
*1 When you not set ipeCfgAccessListInputSrcIpAddress, even when
ipeCfgAccessListInputSrcNetMask is set, it is set as 'any'.When
ipeCfgAccessListInputSrcIpAddress set to 'any',
ipeCfgAccessListInputSrcNetMask is set as 'any'.
*2 When you not set ipeCfgAccessListInputProtocol to '6' or '17',
even when ipeCfgAccessListInputDstPortNum is set, it is set as
'any'.
2) modifing a entry
It isn't possible.
3) deleting a entry
When you SET a destroy(6) to ipeCfgAccessListInputRowStatus, the
entry is destroyed."
::= { ipeCfgAccessListInputEntry 9 }
ipeCfgAccessListForwardTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgAccessListForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of Access List(Forward Direction)."
::= { ipeCfgAccessListGroup 3 }
ipeCfgAccessListForwardEntry OBJECT-TYPE
SYNTAX IpeCfgAccessListForwardEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of Access List(Forward Direction)."
INDEX { ipeCfgAccessListForwardOrderNum }
::= { ipeCfgAccessListForwardTable 1 }
IpeCfgAccessListForwardEntry ::= SEQUENCE {
ipeCfgAccessListForwardOrderNum Integer32,
ipeCfgAccessListForwardNEAddress IpAddress,
ipeCfgAccessListForwardInIfIndex INTEGER,
ipeCfgAccessListForwardOutIfIndex INTEGER,
ipeCfgAccessListForwardSrcIpAddress IpAddress,
ipeCfgAccessListForwardSrcNetMask IpAddress,
ipeCfgAccessListForwardDstIpAddress IpAddress,
ipeCfgAccessListForwardDstNetMask IpAddress,
ipeCfgAccessListForwardProtocol Integer32,
ipeCfgAccessListForwardSrcPortNum Integer32,
ipeCfgAccessListForwardDstPortNum Integer32,
ipeCfgAccessListForwardAction INTEGER,
ipeCfgAccessListForwardRowStatus RowStatus
}
ipeCfgAccessListForwardOrderNum OBJECT-TYPE
SYNTAX Integer32 (1..50)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of table(1-50)."
::= { ipeCfgAccessListForwardEntry 1 }
ipeCfgAccessListForwardNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgAccessListForwardEntry 2 }
ipeCfgAccessListForwardInIfIndex OBJECT-TYPE
SYNTAX INTEGER {
any(0),
inband(3),
ne2(4),
bridge1(11),
bridge2(12),
bridge3(13),
bridge4(14),
bridge5(15),
bridge6(16),
bridge7(17),
bridge8(18),
bridge9(19),
bridge10(20),
bridge11(21),
bridge12(22),
bridge13(23),
bridge14(24),
bridge15(25),
bridge16(26),
bridge17(27),
bridge18(28),
bridge19(29),
bridge20(30)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP Access Control Forward Filter Input"
::= { ipeCfgAccessListForwardEntry 3 }
ipeCfgAccessListForwardOutIfIndex OBJECT-TYPE
SYNTAX INTEGER {
any(0),
inband(3),
ne2(4),
bridge1(11),
bridge2(12),
bridge3(13),
bridge4(14),
bridge5(15),
bridge6(16),
bridge7(17),
bridge8(18),
bridge9(19),
bridge10(20),
bridge11(21),
bridge12(22),
bridge13(23),
bridge14(24),
bridge15(25),
bridge16(26),
bridge17(27),
bridge18(28),
bridge19(29),
bridge20(30)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Forward Filter Output Interface.
The value 'inband' is not supporte"
::= { ipeCfgAccessListForwardEntry 4 }
ipeCfgAccessListForwardSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP Access Control Forward Filter Source IP Address."
::= { ipeCfgAccessListForwardEntry 5 }
ipeCfgAccessListForwardSrcNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Forward Filter Source Subnet Mask.
'0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as 'Any'"
::= { ipeCfgAccessListForwardEntry 6 }
ipeCfgAccessListForwardDstIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Forward Filter Destination IP Address."
::= { ipeCfgAccessListForwardEntry 7 }
ipeCfgAccessListForwardDstNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Forward Filter Destination Subnet Mask.
'0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as
'Any'."
::= { ipeCfgAccessListForwardEntry 8 }
ipeCfgAccessListForwardProtocol OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Forward Filter Protocol.
'-1' acts as 'Any'."
::= { ipeCfgAccessListForwardEntry 9 }
ipeCfgAccessListForwardSrcPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Forward Filter Source Port Number.
'-1' acts as 'Any'."
::= { ipeCfgAccessListForwardEntry 10 }
ipeCfgAccessListForwardDstPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP Access Control Forward Filter Destination Port Number.
'-1' acts as 'Any'."
::= { ipeCfgAccessListForwardEntry 11 }
ipeCfgAccessListForwardAction OBJECT-TYPE
SYNTAX INTEGER { permit(1), deny(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP Access Control Forward Filter Action."
::= { ipeCfgAccessListForwardEntry 12 }
ipeCfgAccessListForwardRowStatus OBJECT-TYPE
SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This RowStatus has a status only 'active(1)'.
1) creating a entry
When you make a new entry, you must SET objects indicated below.
ipeCfgAccessListForwardAction
ipeCfgAccessListForwardRowStatus <- createAndGo(4)
When you are not setting a value of items as follows, it is set
as 'any'.
ipeCfgAccessListForwardInIfIndex
ipeCfgAccessListForwardOutIfIndex
ipeCfgAccessListForwardSrcIpAddress
ipeCfgAccessListForwardSrcNetMask(*1)
ipeCfgAccessListForwardDstIpAddress
ipeCfgAccessListForwardDstNetMask(*2)
ipeCfgAccessListForwardProtocol
ipeCfgAccessListForwardSrcPortNum(*3)
ipeCfgAccessListForwardDstPortNum(*3)
*1 When you not set ipeCfgAccessListForwardSrcIpAddress, even
when ipeCfgAccessListForwardSrcNetMask is set, it is set as
'any'.When ipeCfgAccessListForwardSrcIpAddress set to 'any',
ipeCfgAccessListForwardSrcNetMask is set as 'any'.
*2 When you not set ipeCfgAccessListForwardDstIpAddress, even
when ipeCfgAccessListForwardDstNetMask is set, it is set as
'any'.When ipeCfgAccessListForwardDstIpAddress set to 'any',
ipeCfgAccessListForwardDstNetMask is set as 'any'.
*3 When you not set ipeCfgAccessListForwardProtocol to '6' or
'17',, even when ipeCfgAccessListForwardSrcPortNum and
ipeCfgAccessListForwardDstPortNum are set, it is set as 'any'.
2) modifing a entry
It isn't possible.
3) deleting a entry
When you SET a destroy(6) to ipeCfgAccessListForwardRowStatus,
the entry is destroyed."
::= { ipeCfgAccessListForwardEntry 13 }
ipeCfgAutoIpGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 22 }
ipeCfgAutoIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgAutoIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of AutoIP configuration information."
::= { ipeCfgAutoIpGroup 1 }
ipeCfgAutoIpEntry OBJECT-TYPE
SYNTAX IpeCfgAutoIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of AutoIP configuration information."
INDEX { ipeCfgAutoIpIndex }
::= { ipeCfgAutoIpTable 1 }
IpeCfgAutoIpEntry ::= SEQUENCE {
ipeCfgAutoIpIndex Integer32,
ipeCfgAutoIpNEAddress IpAddress,
ipeCfgAutoIpNetworkAddress IpAddress,
ipeCfgAutoIpNetMask IpAddress
}
ipeCfgAutoIpIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgAutoIpEntry 1 }
ipeCfgAutoIpNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgAutoIpEntry 2 }
ipeCfgAutoIpNetworkAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Aggregation Net of AutoIP.
A set value becomes a binary.
Value range:0x00000000-0xdfffffff(0.0.0.0-223.255.255.255)
If this value is changed in state of 'now setting' or 'automatic
setting', AutoIP will set IP Address again."
::= { ipeCfgAutoIpEntry 3 }
ipeCfgAutoIpNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Aggregation NetMask of AutoIp.
A set value becomes a binary.
Value range:0x80000000-0xfffffffc(1-30bit)
If this value is changed in state of 'now setting' or 'automatic
setting', AutoIP will set IP Address again."
::= { ipeCfgAutoIpEntry 4 }
ipeCfgSysNE1PortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgSysNE1PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "NE1 Port Mode Configuration Table."
::= { ipeConfigurationGroup 25 }
ipeCfgSysNE1PortEntry OBJECT-TYPE
SYNTAX IpeCfgSysNE1PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
INDEX { ipeCfgSysNE1PortIndex }
::= { ipeCfgSysNE1PortTable 1 }
IpeCfgSysNE1PortEntry ::= SEQUENCE {
ipeCfgSysNE1PortIndex Integer32,
ipeCfgSysNE1PortNEAddress IpAddress,
ipeCfgSysNE1PortMode INTEGER
}
ipeCfgSysNE1PortIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgSysNE1PortEntry 1 }
ipeCfgSysNE1PortNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgSysNE1PortEntry 2 }
ipeCfgSysNE1PortMode OBJECT-TYPE
SYNTAX INTEGER { invalid(0), userPort(1), mgmtPort(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "NE1 Port Mode Configuration"
DEFVAL { userPort }
::= { ipeCfgSysNE1PortEntry 3 }
ipeCfgRadiusGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 27 }
ipeCfgRadiusGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgRadiusGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configure RADIUS parameters."
::= { ipeCfgRadiusGroup 1 }
ipeCfgRadiusGeneralEntry OBJECT-TYPE
SYNTAX IpeCfgRadiusGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "..."
INDEX { ipeCfgRadiusGeneralIndex }
::= { ipeCfgRadiusGeneralTable 1 }
IpeCfgRadiusGeneralEntry ::= SEQUENCE {
ipeCfgRadiusGeneralIndex Integer32,
ipeCfgRadiusGeneralNEAddress IpAddress,
ipeCfgRadiusGeneralAuthClientRetransmit Integer32,
ipeCfgRadiusGeneralAuthClientTimeout Integer32
}
ipeCfgRadiusGeneralIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgRadiusGeneralEntry 1 }
ipeCfgRadiusGeneralNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Reserved object for northbound interface."
::= { ipeCfgRadiusGeneralEntry 2 }
ipeCfgRadiusGeneralAuthClientRetransmit OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate maximum retransmit number of Access-Request
message.
The system retransmits Access-Request message to server
according to this configuration."
DEFVAL { 3 }
::= { ipeCfgRadiusGeneralEntry 3 }
ipeCfgRadiusGeneralAuthClientTimeout OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate timeout period for response to Access-Request
message.
In case response (Access-Accept message) is not received
in this period, the system will retransmit message."
DEFVAL { 10 }
::= { ipeCfgRadiusGeneralEntry 4 }
ipeCfgRadiusAuthServerExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgRadiusAuthServerExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configure RADIUS authentication server parameters."
::= { ipeCfgRadiusGroup 2 }
ipeCfgRadiusAuthServerExtEntry OBJECT-TYPE
SYNTAX IpeCfgRadiusAuthServerExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "..."
INDEX { ipeCfgRadiusAuthServerExtIndex }
::= { ipeCfgRadiusAuthServerExtTable 1 }
IpeCfgRadiusAuthServerExtEntry ::= SEQUENCE {
ipeCfgRadiusAuthServerExtIndex Integer32,
ipeCfgRadiusAuthServerNEAddress IpAddress,
ipeCfgRadiusAuthServerAddressType INTEGER,
ipeCfgRadiusAuthServerAddress IpAddress,
ipeCfgRadiusAuthClientServerPortNumber Integer32,
ipeCfgRadiusAuthClientPasswordType INTEGER,
ipeCfgRadiusAuthClientSecretKey DisplayString,
ipeCfgRadiusAuthServerExtRowStatus RowStatus
}
ipeCfgRadiusAuthServerExtIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgRadiusAuthServerExtEntry 1 }
ipeCfgRadiusAuthServerNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Reserved object for northbound interface."
::= { ipeCfgRadiusAuthServerExtEntry 2 }
ipeCfgRadiusAuthServerAddressType OBJECT-TYPE
SYNTAX INTEGER { invalid(0), ipv4(1), ipv6(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate IP address type of this server.
ipv4 : server has IPv4 address.
ipv6 : server has IPv6 address. (NOT SUPPORTED)
ipv6 will be supprted in future version."
DEFVAL { ipv4 }
::= { ipeCfgRadiusAuthServerExtEntry 3 }
ipeCfgRadiusAuthServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicate IP address of this server."
::= { ipeCfgRadiusAuthServerExtEntry 4 }
ipeCfgRadiusAuthClientServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate port number of RADIUS authentication protocol on
this server."
DEFVAL { 1812 }
::= { ipeCfgRadiusAuthServerExtEntry 5 }
ipeCfgRadiusAuthClientPasswordType OBJECT-TYPE
SYNTAX INTEGER { invalid(0), user(1), chap(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate password authentication type. The system select
password attribute on Access-Request message.
user : use User-Password attribute.
chap : use CHAP-Password attribute.
See RFC 2865 for details."
DEFVAL { user }
::= { ipeCfgRadiusAuthServerExtEntry 6 }
ipeCfgRadiusAuthClientSecretKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(8..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate RADIUS shared secret encrypted by blowfish.
This object is used to confirm received RADIUS message is
sent from authenticated server.
This object is also used to encrypt User-Password attribute
on Access-Request message.
See RFC 2865 for details.
The secret key(before encryption) range is 1-63 characters.
The characters which can be used are '-', '_','0'-'9',
'a'-'z' and 'A'-'Z'."
::= { ipeCfgRadiusAuthServerExtEntry 7 }
ipeCfgRadiusAuthServerExtRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The row status of this table."
::= { ipeCfgRadiusAuthServerExtEntry 8 }
ipeCfgRadiusPrivLevelGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgRadiusPrivLevelGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure general privilege level for RADIUS
authetication."
::= { ipeCfgRadiusGroup 3 }
ipeCfgRadiusPrivLevelGeneralEntry OBJECT-TYPE
SYNTAX IpeCfgRadiusPrivLevelGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "..."
INDEX { ipeCfgRadiusPrivLevelGeneralIndex }
::= { ipeCfgRadiusPrivLevelGeneralTable 1 }
IpeCfgRadiusPrivLevelGeneralEntry ::= SEQUENCE {
ipeCfgRadiusPrivLevelGeneralIndex Integer32,
ipeCfgRadiusPrivLevelGeneralNEAddress IpAddress,
ipeCfgRadiusPrivLevelGeneralDefaultAction INTEGER,
ipeCfgRadiusPrivLevelGeneralDefaultGroup DisplayString
}
ipeCfgRadiusPrivLevelGeneralIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgRadiusPrivLevelGeneralEntry 1 }
ipeCfgRadiusPrivLevelGeneralNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Reserved object for northbound interface."
::= { ipeCfgRadiusPrivLevelGeneralEntry 2 }
ipeCfgRadiusPrivLevelGeneralDefaultAction OBJECT-TYPE
SYNTAX INTEGER { invalid(0), denyLogin(1), useDefaultGroup(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate system default action in case privilege level
is not specified on Access-Accept message or received
privilege level is set to disable in
ipeCfgRadiusGroupPrivLevelMappingEnable.
denyLogin : deny login.
useDefaultGroup : use group specified in
ipeCfgRadiusPrivLevelGeneralDefaultGroup."
DEFVAL { useDefaultGroup }
::= { ipeCfgRadiusPrivLevelGeneralEntry 3 }
ipeCfgRadiusPrivLevelGeneralDefaultGroup OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate default group in case privilege level is not
specified.
This object is effective only if
ipeCfgRadiusPrivLevelGeneralDefaultAction is
useDefaultGroup.
The value of this object should be registered group name in
the system (as ipeCfgAccountGroupName).
The characters which can be used are '-', '_','0'-'9',
'a'-'z' and 'A'-'Z'."
DEFVAL { "Operator" }
::= { ipeCfgRadiusPrivLevelGeneralEntry 4 }
ipeCfgRadiusGroupPrivLevelMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgRadiusGroupPrivLevelMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure privilege level mapping for RADIUS
authentication."
::= { ipeCfgRadiusGroup 4 }
ipeCfgRadiusGroupPrivLevelMappingEntry OBJECT-TYPE
SYNTAX IpeCfgRadiusGroupPrivLevelMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "..."
INDEX { ipeCfgRadiusGroupPrivLevelMappingPrivLevel }
::= { ipeCfgRadiusGroupPrivLevelMappingTable 1 }
IpeCfgRadiusGroupPrivLevelMappingEntry ::= SEQUENCE {
ipeCfgRadiusGroupPrivLevelMappingPrivLevel Integer32,
ipeCfgRadiusGroupPrivLevelMappingNEAddress IpAddress,
ipeCfgRadiusGroupPrivLevelMappingEnable INTEGER,
ipeCfgRadiusGroupPrivLevelMappingGroup DisplayString
}
ipeCfgRadiusGroupPrivLevelMappingPrivLevel OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this table.
The value corresponds to received privilege level on
Access-Accept message."
::= { ipeCfgRadiusGroupPrivLevelMappingEntry 1 }
ipeCfgRadiusGroupPrivLevelMappingNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Reserved object for northbound interface."
::= { ipeCfgRadiusGroupPrivLevelMappingEntry 2 }
ipeCfgRadiusGroupPrivLevelMappingEnable OBJECT-TYPE
SYNTAX INTEGER { invalid(0), disable(1), enable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable privilege level mapping on this
privilege level.
disable : privilege level mapping is disabled.
enable : privilege level mapping is enabled.
The system default value of this object shown below.
PrivLevel=1, 7, 15 : enable
other PrivLevel : disable
In case this object is set to disable, the system
behave according to
ipeCfgRadiusPrivLevelGeneralDefaultAction."
DEFVAL { disable }
::= { ipeCfgRadiusGroupPrivLevelMappingEntry 3 }
ipeCfgRadiusGroupPrivLevelMappingGroup OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicate group name correspond to privilege level.
This object is effective only if
ipeCfgRadiusGroupPrivLevelMappingEnable is enable.
When the system received Access-Accept message with certain
privilege level, login user has same privilege as this
group.
The system default value of this object shown below.
PrivLevel=1 : Operator
PrivLevel=7 : Config
PrivLevel=15 : Admin
The value should be registered group name registerd in
the system (as ipeCfgAccountGroupName).
The characters which can be used are '-', '_','0'-'9',
'a'-'z' and 'A'-'Z'."
::= { ipeCfgRadiusGroupPrivLevelMappingEntry 4 }
ipeCfgLldpGroup OBJECT IDENTIFIER
::= { ipeConfigurationGroup 28 }
ipeCfgLldpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeCfgLldpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "LLDP set up information table."
::= { ipeCfgLldpGroup 1 }
ipeCfgLldpEntry OBJECT-TYPE
SYNTAX IpeCfgLldpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of LLDP set up information table."
INDEX { ipeCfgLldpIndex }
::= { ipeCfgLldpTable 1 }
IpeCfgLldpEntry ::= SEQUENCE {
ipeCfgLldpIndex Integer32,
ipeCfgLldpNEAddress IpAddress,
ipeCfgLldpProprietaryModeMacAddress MacAddress
}
ipeCfgLldpIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeCfgLldpEntry 1 }
ipeCfgLldpNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeCfgLldpEntry 2 }
ipeCfgLldpProprietaryModeMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC address of LLDP Frame in NEC mode.
This object is effective only if ipeCfgPortXXXXXLldpMode is set
to proprietaryMode."
DEFVAL { '01004c01da50'h }
::= { ipeCfgLldpEntry 3 }
ipeCommunicationsGroup OBJECT IDENTIFIER
::= { system5 4 }
ipeNeighborInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeNeighborInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Neighbor NE table."
::= { ipeCommunicationsGroup 1 }
ipeNeighborInfoEntry OBJECT-TYPE
SYNTAX IpeNeighborInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Neighbor NE entry."
INDEX { ipeNeighborInfoIndex }
::= { ipeNeighborInfoTable 1 }
IpeNeighborInfoEntry ::= SEQUENCE {
ipeNeighborInfoIndex InterfaceIndex,
ipeNeighborInfoNEAddress IpAddress,
ipeNeighborIpAddress OCTET STRING
}
ipeNeighborInfoIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeNeighborInfoEntry 1 }
ipeNeighborInfoNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeNeighborInfoEntry 2 }
ipeNeighborIpAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..240))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"[iPASOLINK200/400/1000series/EX/iX]
Neighbor NE is displayed as unit of registration every eight
bytes of Internet Protocol address (4byte) + Node TYPE(4byte).The
number of maximum registration is 30 (240byte). attention: ne2
set the IpAddress only, do not set the Node type.
[iPASOLINK VR series]
The number of maximum registration is 13.
Type(1byte) and Length(1byte) are common information is 2byte.
Unit of registration of each neighbor as
IPv4 Address(4bytes) + Node Type(4bytes) + MAC Address(6bytes) +
ifindex(4bytes)."
::= { ipeNeighborInfoEntry 3 }
ipeStatusGroup OBJECT IDENTIFIER
::= { system5 6 }
ipeStsNtp OBJECT IDENTIFIER
::= { ipeStatusGroup 1 }
ipeStsNtpStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsNtpStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of NTP statistics."
::= { ipeStsNtp 1 }
ipeStsNtpStatisticsEntry OBJECT-TYPE
SYNTAX IpeStsNtpStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of NTP statistics."
INDEX { ipeStsNtpStatisticsIndex }
::= { ipeStsNtpStatisticsTable 1 }
IpeStsNtpStatisticsEntry ::= SEQUENCE {
ipeStsNtpStatisticsIndex Integer32,
ipeStsNtpStatisticsNEAddress IpAddress,
ipeStsNtpSyncStatusInfo OCTET STRING,
ipeStsNtpSetTime INTEGER
}
ipeStsNtpStatisticsIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsNtpStatisticsEntry 1 }
ipeStsNtpStatisticsNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeStsNtpStatisticsEntry 2 }
ipeStsNtpSyncStatusInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Synchronous state information."
::= { ipeStsNtpStatisticsEntry 3 }
ipeStsNtpSetTime OBJECT-TYPE
SYNTAX INTEGER { notSetManually(0), setManually(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Presence of time manual setting."
::= { ipeStsNtpStatisticsEntry 4 }
ipeStsFtp OBJECT IDENTIFIER
::= { ipeStatusGroup 2 }
ipeStsFtpStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsFtpStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of FTP status."
::= { ipeStsFtp 1 }
ipeStsFtpStatusEntry OBJECT-TYPE
SYNTAX IpeStsFtpStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of FTP status."
INDEX { ipeStsFtpStatusIndex }
::= { ipeStsFtpStatusTable 1 }
IpeStsFtpStatusEntry ::= SEQUENCE {
ipeStsFtpStatusIndex Integer32,
ipeStsFtpStatusNEAddress IpAddress,
ipeStsFtpStatusLoginUser DisplayString,
ipeStsFtpStatusLoginIpAddress IpAddress,
ipeStsFtpStatusSessionId Integer32
}
ipeStsFtpStatusIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsFtpStatusEntry 1 }
ipeStsFtpStatusNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeStsFtpStatusEntry 2 }
ipeStsFtpStatusLoginUser OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of Connected user."
::= { ipeStsFtpStatusEntry 3 }
ipeStsFtpStatusLoginIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address of Connected user ."
::= { ipeStsFtpStatusEntry 4 }
ipeStsFtpStatusSessionId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Session information of Connected User."
::= { ipeStsFtpStatusEntry 5 }
ipeStsSftp OBJECT IDENTIFIER
::= { ipeStatusGroup 3 }
ipeStsSftpStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsSftpStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of SFTP status ."
::= { ipeStsSftp 1 }
ipeStsSftpStatusEntry OBJECT-TYPE
SYNTAX IpeStsSftpStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of SFTP status ."
INDEX { ipeStsSftpStatusIndex }
::= { ipeStsSftpStatusTable 1 }
IpeStsSftpStatusEntry ::= SEQUENCE {
ipeStsSftpStatusIndex Integer32,
ipeStsSftpStatusNEAddress IpAddress,
ipeStsSftpStatusLoginUser DisplayString,
ipeStsSftpStatusLoginIpAddress IpAddress,
ipeStsSftpStatusSessionId Integer32
}
ipeStsSftpStatusIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsSftpStatusEntry 1 }
ipeStsSftpStatusNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeStsSftpStatusEntry 2 }
ipeStsSftpStatusLoginUser OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of Connected user."
::= { ipeStsSftpStatusEntry 3 }
ipeStsSftpStatusLoginIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address of Connected user ."
::= { ipeStsSftpStatusEntry 4 }
ipeStsSftpStatusSessionId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Session information of Connected User."
::= { ipeStsSftpStatusEntry 5 }
ipeStsHttp OBJECT IDENTIFIER
::= { ipeStatusGroup 4 }
ipeStsHttpStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsHttpStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of HTTP status."
::= { ipeStsHttp 1 }
ipeStsHttpStatusEntry OBJECT-TYPE
SYNTAX IpeStsHttpStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of HTTP status."
INDEX { ipeStsHttpStatusIndex }
::= { ipeStsHttpStatusTable 1 }
IpeStsHttpStatusEntry ::= SEQUENCE {
ipeStsHttpStatusIndex Integer32,
ipeStsHttpStatusNEAddress IpAddress,
ipeStsHttpStatusLoginUser DisplayString,
ipeStsHttpStatusLoginIpAddress IpAddress,
ipeStsHttpStatusSessionId Integer32
}
ipeStsHttpStatusIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsHttpStatusEntry 1 }
ipeStsHttpStatusNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeStsHttpStatusEntry 2 }
ipeStsHttpStatusLoginUser OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of Connected user."
::= { ipeStsHttpStatusEntry 3 }
ipeStsHttpStatusLoginIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address of Connected user ."
::= { ipeStsHttpStatusEntry 4 }
ipeStsHttpStatusSessionId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Session information of Connected User."
::= { ipeStsHttpStatusEntry 5 }
ipeStsHttps OBJECT IDENTIFIER
::= { ipeStatusGroup 5 }
ipeStsHttpsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsHttpsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of HTTPS status."
::= { ipeStsHttps 1 }
ipeStsHttpsStatusEntry OBJECT-TYPE
SYNTAX IpeStsHttpsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of HTTPS status."
INDEX { ipeStsHttpsStatusIndex }
::= { ipeStsHttpsStatusTable 1 }
IpeStsHttpsStatusEntry ::= SEQUENCE {
ipeStsHttpsStatusIndex Integer32,
ipeStsHttpsStatusNEAddress IpAddress,
ipeStsHttpsStatusLoginUser DisplayString,
ipeStsHttpsStatusLoginIpAddress IpAddress,
ipeStsHttpsStatusSessionId Integer32
}
ipeStsHttpsStatusIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsHttpsStatusEntry 1 }
ipeStsHttpsStatusNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeStsHttpsStatusEntry 2 }
ipeStsHttpsStatusLoginUser OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of Connected user."
::= { ipeStsHttpsStatusEntry 3 }
ipeStsHttpsStatusLoginIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP Address of Connected user."
::= { ipeStsHttpsStatusEntry 4 }
ipeStsHttpsStatusSessionId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Session information of Connected User."
::= { ipeStsHttpsStatusEntry 5 }
ipeStsStp OBJECT IDENTIFIER
::= { ipeStatusGroup 6 }
ipeStsStpBridgeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsStpBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of STP status."
::= { ipeStsStp 1 }
ipeStsStpBridgeEntry OBJECT-TYPE
SYNTAX IpeStsStpBridgeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of STP status."
INDEX { ipeStsStpBridgeIndex }
::= { ipeStsStpBridgeTable 1 }
IpeStsStpBridgeEntry ::= SEQUENCE {
ipeStsStpBridgeIndex Integer32,
ipeStsStpBridgeNEAddress IpAddress,
ipeStsStpBridgeProtocolSpecification INTEGER,
ipeStsStpBridgeDesignatedRoot BridgeId,
ipeStsStpBridgeRootCost Integer32,
ipeStsStpBridgeRootPort Integer32,
ipeStsStpBridgeMaxAge Timeout,
ipeStsStpBridgeHelloTime Timeout,
ipeStsStpBridgeForwardDelay Timeout
}
ipeStsStpBridgeIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsStpBridgeEntry 1 }
ipeStsStpBridgeNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeStsStpBridgeEntry 2 }
ipeStsStpBridgeProtocolSpecification OBJECT-TYPE
SYNTAX INTEGER { unknown(1), decLb100(2), ieee8021d(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of what version of the Spanning Tree Protocol is
being run. The value 'decLb100(2)' indicates the DEC LANbridge
100 Spanning Tree protocol. IEEE 802.1d implementations will
return 'ieee8021d(3)'. If future versions of the IEEE Spanning
Tree Protocol are released that are incompatible with the current
version a new value will be defined.
It's a fixed Ieee8021d(3)."
::= { ipeStsStpBridgeEntry 3 }
ipeStsStpBridgeDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning tree as
determined by the Spanning Tree Protocol as executed by this
node. This value is used as the Root Identifier parameter in all
Configuration Bridge PDUs originated by this node."
::= { ipeStsStpBridgeEntry 4 }
ipeStsStpBridgeRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from this bridge."
::= { ipeStsStpBridgeEntry 5 }
ipeStsStpBridgeRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the lowest cost path
from this bridge to the root bridge."
::= { ipeStsStpBridgeEntry 6 }
ipeStsStpBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol information learned
from the network on any port before it is discarded, in units of
hundredths of
a second. This is the actual value that this bridge is currently
using."
::= { ipeStsStpBridgeEntry 7 }
ipeStsStpBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration
bridge PDUs by this node on any port when it is the root of the
spanning tree or trying to become so, in units of hundredths of a
second. This is the actual value that this bridge is currently
using."
::= { ipeStsStpBridgeEntry 8 }
ipeStsStpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the
port stays in each of the Listening and Learning states, which
precede the Forwarding state. This value is also used, when a
topology change has been detected and is underway, to age all
dynamic entries in the Forwarding Database."
::= { ipeStsStpBridgeEntry 9 }
ipeStsStpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table of STP port status.
When the system is running on the mplsTp mode, this table may
return wrong value. (must not use this table on mplsTp mode)."
::= { ipeStsStp 2 }
ipeStsStpPortEntry OBJECT-TYPE
SYNTAX IpeStsStpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of STP port status table."
INDEX { ipeStsStpPortIfIndex, ipeStsStpPortBridgeIndex }
::= { ipeStsStpPortTable 1 }
IpeStsStpPortEntry ::= SEQUENCE {
ipeStsStpPortIfIndex InterfaceIndex,
ipeStsStpPortBridgeIndex Integer32,
ipeStsStpPortNEAddress IpAddress,
ipeStsStpPortPortState INTEGER,
ipeStsStpPortDesignatedRoot BridgeId,
ipeStsStpPortDesignatedCost Integer32,
ipeStsStpPortDesignatedBridge BridgeId,
ipeStsStpPortDesignatedPort OCTET STRING
}
ipeStsStpPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsStpPortEntry 1 }
ipeStsStpPortBridgeIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsStpPortEntry 2 }
ipeStsStpPortNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeStsStpPortEntry 3 }
ipeStsStpPortPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by application of the
Spanning Tree Protocol."
::= { ipeStsStpPortEntry 4 }
ipeStsStpPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge recorded as the Root
in the Configuration BPDUs transmitted by the Designated Bridge
for the segment to which the port is attached."
::= { ipeStsStpPortEntry 5 }
ipeStsStpPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the segment connected to
this port. This value is compared to the Root Path Cost field in
received bridge PDUs."
::= { ipeStsStpPortEntry 6 }
ipeStsStpPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this port considers to
be the Designated Bridge for this port's segment."
::= { ipeStsStpPortEntry 7 }
ipeStsStpPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2..2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated Bridge for
this port's segment."
::= { ipeStsStpPortEntry 8 }
ipeStsPort OBJECT IDENTIFIER
::= { ipeStatusGroup 7 }
ipeStsPortEtherTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsPortEtherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of port status."
::= { ipeStsPort 1 }
ipeStsPortEtherEntry OBJECT-TYPE
SYNTAX IpeStsPortEtherEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of port status table."
INDEX { ipeStsPortEtherIfIndex }
::= { ipeStsPortEtherTable 1 }
IpeStsPortEtherEntry ::= SEQUENCE {
ipeStsPortEtherIfIndex InterfaceIndex,
ipeStsPortEtherNEAddress IpAddress,
ipeStsPortEtherLinkUp Integer32,
ipeStsPortEtherSpeed Integer32,
ipeStsPortEtherDuplex Integer32,
ipeStsPortEtherFlowControl Integer32
}
ipeStsPortEtherIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsPortEtherEntry 1 }
ipeStsPortEtherNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeStsPortEtherEntry 2 }
ipeStsPortEtherLinkUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Link Up/Down of I/F.
value range:1 LinkUp
2 LinkDown"
::= { ipeStsPortEtherEntry 3 }
ipeStsPortEtherSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SpeedI of I/F.
value range:10 10Mb/s
100 100Mb/s
1000 1000Mb/s"
::= { ipeStsPortEtherEntry 4 }
ipeStsPortEtherDuplex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Duplex of I/F.
value range:1 half duplex
2 full duplex"
::= { ipeStsPortEtherEntry 5 }
ipeStsPortEtherFlowControl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FlowControl of I/F.
value range:0 flowctl none
1 receive only
2 transfer only
3 receive and transfer"
::= { ipeStsPortEtherEntry 6 }
ipeStsPortNe2Table OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsPortNe2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of NE2 port status table."
::= { ipeStsPort 2 }
ipeStsPortNe2Entry OBJECT-TYPE
SYNTAX IpeStsPortNe2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of NE2 port status entry."
INDEX { ipeStsPortNe2IfIndex }
::= { ipeStsPortNe2Table 1 }
IpeStsPortNe2Entry ::= SEQUENCE {
ipeStsPortNe2IfIndex InterfaceIndex,
ipeStsPortNe2NEAddress IpAddress,
ipeStsPortNe2LinkUp Integer32
}
ipeStsPortNe2IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsPortNe2Entry 1 }
ipeStsPortNe2NEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeStsPortNe2Entry 2 }
ipeStsPortNe2LinkUp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Link Up/Down of I/F."
::= { ipeStsPortNe2Entry 3 }
ipeStsBridge OBJECT IDENTIFIER
::= { ipeStatusGroup 8 }
ipeStsBridgeFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsBridgeFdbEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Learning MAC table of bridge."
::= { ipeStsBridge 1 }
ipeStsBridgeFdbEntry OBJECT-TYPE
SYNTAX IpeStsBridgeFdbEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Learning MAC table entry of bridge."
INDEX {
ipeStsBridgeFdbBridgeIndex,
ipeStsBridgeFdbIfIndex,
ipeStsBridgeFdbIndex
}
::= { ipeStsBridgeFdbTable 1 }
IpeStsBridgeFdbEntry ::= SEQUENCE {
ipeStsBridgeFdbBridgeIndex Integer32,
ipeStsBridgeFdbIfIndex InterfaceIndex,
ipeStsBridgeFdbIndex Integer32,
ipeStsBridgeFdbNEAddress IpAddress,
ipeStsBridgeFdbAddress MacAddress
}
ipeStsBridgeFdbBridgeIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Index of this table."
::= { ipeStsBridgeFdbEntry 1 }
ipeStsBridgeFdbIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Index of this table."
::= { ipeStsBridgeFdbEntry 2 }
ipeStsBridgeFdbIndex OBJECT-TYPE
SYNTAX Integer32 (1..63)
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "Index of this table."
::= { ipeStsBridgeFdbEntry 3 }
ipeStsBridgeFdbNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION "reserved."
::= { ipeStsBridgeFdbEntry 4 }
ipeStsBridgeFdbAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Learning MAC address of bridge.
When Snmpwalk is done, it becomes operation like ReadCreate."
::= { ipeStsBridgeFdbEntry 5 }
ipeStsAutoIp OBJECT IDENTIFIER
::= { ipeStatusGroup 9 }
ipeStsAutoIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeStsAutoIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of AutoIP status."
::= { ipeStsAutoIp 1 }
ipeStsAutoIpEntry OBJECT-TYPE
SYNTAX IpeStsAutoIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "entry of AutoIP status table."
INDEX { ipeStsAutoIpIndex }
::= { ipeStsAutoIpTable 1 }
IpeStsAutoIpEntry ::= SEQUENCE {
ipeStsAutoIpIndex Integer32,
ipeStsAutoIpNEAddress IpAddress,
ipeStsAutoIpState Integer32,
ipeStsAutoIpTempAddress IpAddress
}
ipeStsAutoIpIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeStsAutoIpEntry 1 }
ipeStsAutoIpNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeStsAutoIpEntry 2 }
ipeStsAutoIpState OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AutoIP state information.
Valid Value (1:before setting<initial value>,2:now setting,
3:automatic setting,4:manual setting)."
::= { ipeStsAutoIpEntry 3 }
ipeStsAutoIpTempAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temporary IP Address of AutoIP setting.
initial value = 0.0.0.0
other value = Temporary IP Address
If AutoIP state information is 3, Temporary IP Address is valid
value."
::= { ipeStsAutoIpEntry 4 }
ipeAccessGroup OBJECT IDENTIFIER
::= { system5 7 }
ipeAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpeAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table of SNMP access information."
::= { ipeAccessGroup 1 }
ipeAccessEntry OBJECT-TYPE
SYNTAX IpeAccessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of SNMP access information.
All OID don't check that a set value is valid or invalid."
INDEX { ipeAccessIndex }
::= { ipeAccessTable 1 }
IpeAccessEntry ::= SEQUENCE {
ipeAccessIndex Integer32,
ipeAccessNEAddress IpAddress,
ipeAccessUserName DisplayString,
ipeAccessFromAddress IpAddress,
ipeAccessType INTEGER,
ipeAccessSessionId Integer32,
ipeAccessErrorCode Integer32
}
ipeAccessIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index of this table."
::= { ipeAccessEntry 1 }
ipeAccessNEAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "reserved."
::= { ipeAccessEntry 2 }
ipeAccessUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A user name which is used for CTRL-TRAP and logging.
When you send SET-Request, it is necessary to SET this OID to
first 'variable-bindings' of the SET-Request PDU.
Please use an ASCII code.
The characters which can be used are '-', '_','0'-'9', 'a'-'z'
and 'A'-'Z'.
When this OID is read, 0x00(null) is returned."
::= { ipeAccessEntry 3 }
ipeAccessFromAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A source IP address which is used for CTRL-TRAP and logging.
The use is optional.
When this OID is read, 0.0.0.0 is returned."
::= { ipeAccessEntry 4 }
ipeAccessType OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
nms(1),
webLct(2),
cli(3),
internal(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A type of connection origin.
The use is optional.
Whne this OID is read, invalid(0) is returned."
::= { ipeAccessEntry 5 }
ipeAccessSessionId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A session ID.
The use is optional.
When this OID is read, 0 is returned."
::= { ipeAccessEntry 6 }
ipeAccessErrorCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Error Code."
::= { ipeAccessEntry 7 }
-----------------------------------------------
-- End User MIB Object Definitions
-----------------------------------------------
END
View Git Blame Copy Permalink