3726 lines
131 KiB
Plaintext
3726 lines
131 KiB
Plaintext
|
|
-- *****************************************************************
|
|
-- Moxa NPort W2x50A MIB
|
|
--
|
|
-- Copyright (c) 2012 by Moxa Inc.
|
|
-- All rights reserved.
|
|
|
|
-- Version: 1.10
|
|
-- Date: 2016/01/29
|
|
-- *****************************************************************
|
|
|
|
MOXA-W2x50A-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
enterprises, IpAddress, OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
DateAndTime, TEXTUAL-CONVENTION, MacAddress, DisplayString
|
|
FROM SNMPv2-TC;
|
|
|
|
moxa OBJECT IDENTIFIER ::= { enterprises 8691 } -- 1.3.6.1.4.1.8691
|
|
|
|
nport OBJECT IDENTIFIER ::= { moxa 2 } -- 1.3.6.1.4.1.8691.2
|
|
|
|
w2x50A MODULE-IDENTITY
|
|
LAST-UPDATED "201507170000Z"
|
|
ORGANIZATION "Moxa Inc."
|
|
CONTACT-INFO
|
|
"Email: support@moxa.com
|
|
Tel : +886 2 89191230"
|
|
|
|
DESCRIPTION
|
|
"The MIB module for Moxa NPort W2x50A series specific information."
|
|
|
|
::= { nport 13 } -- 1.3.6.1.4.1.8691.2.13
|
|
|
|
-- -------------------------------------------------------------
|
|
-- groups in the MOXA-NPort W2x50A MIB
|
|
-- -------------------------------------------------------------
|
|
|
|
swMgmt OBJECT IDENTIFIER ::= { w2x50A 1 } -- 1.3.6.1.4.1.8691.2.13.1
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Textual Conventions
|
|
-- -------------------------------------------------------------
|
|
|
|
PortList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
ports, with the first octet specifying ports 1 through
|
|
8, the second octet specifying ports 9 through 16, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered port, and the least significant bit
|
|
represents the highest numbered port. Thus, each port
|
|
of the bridge is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that port is included in the set of ports; the port
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING
|
|
|
|
-- -------------------------------------------------------------
|
|
-- swMgmt group
|
|
-- -------------------------------------------------------------
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Overview
|
|
-- -------------------------------------------------------------
|
|
|
|
overview OBJECT IDENTIFIER ::= { swMgmt 1 } -- 1.3.6.1.4.1.8691.2.13.1.1
|
|
|
|
modelName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The model name of the NPort. The possible values
|
|
of this parameter are:
|
|
'NPort W2x50A' for NPort W2x50A."
|
|
::= { overview 1 }
|
|
|
|
serialNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial number of the NPort. Every NPort
|
|
W2x50A series device server is assigned a unique serial
|
|
number before it is shipped."
|
|
::= { overview 2 }
|
|
|
|
firmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the firmware currently running on
|
|
the NPort."
|
|
::= { overview 3 }
|
|
|
|
ethIPAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the NPort's Ethernet interface."
|
|
::= { overview 4 }
|
|
|
|
ethMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the NPort's Ethernet interface."
|
|
::= { overview 5 }
|
|
|
|
wlanIPAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the NPort's WLAN interface."
|
|
::= { overview 6 }
|
|
|
|
wlanMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the NPort's WLAN interface."
|
|
::= { overview 7 }
|
|
|
|
wlanSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SSID of WLAN."
|
|
::= { overview 8 }
|
|
|
|
wlanNetworkType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Type of Wireless LAN. The possible values are
|
|
'Infrastrcture Mode' and 'Ad-hoc Mode'"
|
|
::= { overview 9 }
|
|
|
|
wlanSecurityMode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Security mode of Wireless LAN. The possible values are
|
|
'Open System', 'Shared Key', 'WPA', 'WPA-PSK', 'WPA2', 'WPA2-PSK'"
|
|
::= { overview 10 }
|
|
|
|
wlanRFType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF type of Wireless LAN. The possible values are
|
|
'Auto', '802.11b', '802.11g'"
|
|
::= { overview 11 }
|
|
|
|
wlanCountryCode OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WLAN country code"
|
|
::= { overview 12 }
|
|
|
|
wlanFastRoaming OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fast roaming state"
|
|
::= { overview 13 }
|
|
|
|
activeNetworkPort OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current active network port. The possible values are
|
|
'WLAN', 'Ethernet'"
|
|
::= { overview 14 }
|
|
|
|
upTime OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time (in human-readable notation) since the
|
|
system was last re-initialized."
|
|
::= { overview 15 }
|
|
|
|
serialPort1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View NPort's serial port 1 setting."
|
|
::= { overview 16 }
|
|
|
|
serialPort2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View NPort's serial port 2 setting."
|
|
::= { overview 17 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Basic settings
|
|
-- -------------------------------------------------------------
|
|
|
|
basicSetting OBJECT IDENTIFIER ::= { swMgmt 2} -- 1.3.6.1.4.1.8691.2.13.1.2
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Basic settings -> Server settings
|
|
-- -------------------------------------------------------------
|
|
|
|
serverSetting OBJECT IDENTIFIER ::= { basicSetting 1 } -- 1.3.6.1.4.1.8691.2.13.1.2.1
|
|
|
|
serverName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A text string used to identify the NPort."
|
|
::= { serverSetting 1 }
|
|
|
|
serverLocation OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A text string used to identify the location of the NPort. This
|
|
option is useful for specifying the location or
|
|
application of different NPort device servers."
|
|
::= { serverSetting 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Basic settings -> Time settings
|
|
-- -------------------------------------------------------------
|
|
|
|
timeSetting OBJECT IDENTIFIER ::= { basicSetting 2 } -- 1.3.6.1.4.1.8691.2.13.1.2.2
|
|
|
|
timeZone OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
GMT-1200_Eniwetok-Kwajalein(0),
|
|
GMT-1100_Midway-Island-Samoa(1),
|
|
GMT-1000_Hawaii(2),
|
|
GMT-0900_Alaska(3),
|
|
GMT-0800_Pacific-Time-US_Canada-Tijuana(4),
|
|
GMT-0700_Arizona(5),
|
|
GMT-0700_Mountain-Time-US_Canada(6),
|
|
GMT-0600_Central-Time-US_Canada(7),
|
|
GMT-0600_Mexico-City-Tegucigalpa(8),
|
|
GMT-0600_Saskatchewan(9),
|
|
GMT-0500_Bogota-Lima-Quito(10),
|
|
GMT-0500_Eastern-Time-US_Canada(11),
|
|
GMT-0500_Indiana-East(12),
|
|
GMT-0430_Caracas(13),
|
|
GMT-0400_Atlantic-Time-Canada(14),
|
|
GMT-0400_Georgetown-La-Paz(15),
|
|
GMT-0400_Santiago(16),
|
|
GMT-0330_Newfoundland(17),
|
|
GMT-0300_Brasilia(18),
|
|
GMT-0300_Buenos-Aires(19),
|
|
GMT-0200_Mid-Atlantic(20),
|
|
GMT-0100_Azores-Cape-Verde-Is(21),
|
|
GMT_Casabanca-Monrovia(22),
|
|
GMT_Greenich-Mean-Time_Dublin-Edinburgh-Lisbon-London(23),
|
|
GMT_0100_Amsterdam-Berlin-Bern-Rome-Stockholm-Vienna(24),
|
|
GMT_0100_Belgrade-Bratislava-Budapest-Ljubljana-Prague(25),
|
|
GMT_0100_Brussels-Copenhagen-Madrid-Paris-Vilnius(26),
|
|
GMT_0100_Sarajevo-Skopje-Warsaw-Zagreb(27),
|
|
GMT_0200_Athens-Istanbul-Minsk(28),
|
|
GMT_0200_Bucharest(29),
|
|
GMT_0200_Cairo(30),
|
|
GMT_0200_Harare-Pretoria(31),
|
|
GMT_0200_Helsinki-Riga-Sofia-Tallinn(32),
|
|
GMT_0200_Jerusalem(33),
|
|
GMT_0300_Baghdad-Kuwait-Riyadh(34),
|
|
GMT_0300_Moscow-St-Petersburg-Volgograd(35),
|
|
GMT_0300_Mairobi(36),
|
|
GMT_0330_Tehran(37),
|
|
GMT_0400_Abu-Dhabi-Muscat(38),
|
|
GMT_0400_Baku-Tbilisi(39),
|
|
GMT_0430_Kabul(40),
|
|
GMT_0500_Ekaterinburg(41),
|
|
GMT_0500_Islamabad-Karachi-Tashkent(42),
|
|
GMT_0530_Bombay-Calcutta-Madras-New-Delhi(43),
|
|
GMT_0600_Astana-Almaty-Dhaka(44),
|
|
GMT_0600_Colombo(45),
|
|
GMT_0700_Bangkok-Hanoi-Jakarta(46),
|
|
GMT_0800_Beijing-Chongqing-Hong-Kong-Urumqi(47),
|
|
GMT_0800_Perth(48),
|
|
GMT_0800_Singapore(49),
|
|
GMT_0800_Taipei(50),
|
|
GMT_0900_Osaka-Sapporo-Tokyo(51),
|
|
GMT_0900_Seoul(52),
|
|
GMT_0900_Yakutsk(53),
|
|
GMT_0930_Adelaide(54),
|
|
GMT_0930_Darwin(55),
|
|
GMT_1000_Brisbane(56),
|
|
GMT_1000_Canberra-Melbourne-Sydney(57),
|
|
GMT_1000_Guam-Port-Moresby(58),
|
|
GMT_1000_Hobart(59),
|
|
GMT_1000_Vladivostok(60),
|
|
GMT_1100_Magadan-Solomon-Is-New-Caledonia(61),
|
|
GMT_1200_Auckland-Wllington(62),
|
|
GMT_1200_Fiji-Kamchatka-Marshall-Is(63)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time-zone index of the NPort."
|
|
::= { timeSetting 1 }
|
|
|
|
localTime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..19))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system time in the following format
|
|
yyyy/mm/dd hh:mm:ss"
|
|
::= { timeSetting 2 }
|
|
|
|
timeServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server uses SNTP
|
|
(RFC-1769) for auto time calibration.
|
|
Input the correct 'Time server' IP address or domain
|
|
name. Once the NPort W2x50A series device server
|
|
is configured with the correct Time server address,
|
|
it will request time information from the Time server
|
|
every 10 minutes."
|
|
::= { timeSetting 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings
|
|
-- -------------------------------------------------------------
|
|
|
|
networkSetting OBJECT IDENTIFIER ::= { swMgmt 3 } -- 1.3.6.1.4.1.8691.2.13.1.3
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> General
|
|
-- -------------------------------------------------------------
|
|
|
|
generalSetting OBJECT IDENTIFIER ::= { networkSetting 1 } -- 1.3.6.1.4.1.8691.2.13.1.3.1
|
|
|
|
dnsServer1IpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first DNS server address. When the user wants
|
|
to visit a particular website, the computer asks a
|
|
Domain Name System (DNS) server for the website's
|
|
correct IP address, and then the computer uses the
|
|
response to connect to the web server. DNS is the
|
|
way that Internet domain names are identified and
|
|
translated into IP addresses. A domain name is an
|
|
alphanumeric name, such as moxa.com, that it is
|
|
usually easier to remember. A DNS server is a host
|
|
that translates this kind of text-based domain name
|
|
into the numeric IP address used to establish a
|
|
TCP/IP connection."
|
|
::= { generalSetting 1 }
|
|
|
|
dnsServer2IpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second DNS server address. When the user wants
|
|
to visit a particular website, the computer asks a
|
|
Domain Name System (DNS) server for the website's
|
|
correct IP address, and then the computer uses the
|
|
response to connect to the web server. DNS is the
|
|
way that Internet domain names are identified and
|
|
translated into IP addresses. A domain name is an
|
|
alphanumeric name, such as moxa.com, that it is
|
|
usually easier to remember. A DNS server is a host
|
|
that translates this kind of text-based domain name
|
|
into the numeric IP address used to establish a
|
|
TCP/IP connection."
|
|
::= { generalSetting 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> Ethernet
|
|
-- -------------------------------------------------------------
|
|
|
|
ethernetSetting OBJECT IDENTIFIER ::= { networkSetting 2 } -- 1.3.6.1.4.1.8691.2.13.1.3.2
|
|
|
|
ethIpConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER { static(0), dhcp(1), bootp(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP configuration mode of the NPort. You can
|
|
choose from four possible IP configuration modes:
|
|
Static, DHCP, DHCP/BOOTP, BOOTP."
|
|
::= { ethernetSetting 1 }
|
|
|
|
ethIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An IP address is a number assigned to a network
|
|
device (such as a computer) as a permanent address
|
|
on the network. Computers use the IP address to
|
|
identify and talk to each other over the network.
|
|
Choose a proper IP address that is unique and valid
|
|
in your network environment."
|
|
::= { ethernetSetting 2 }
|
|
|
|
ethNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A subnet mask represents all of the network hosts
|
|
at one geographic location, in one building, or on
|
|
the same local area network. When a packet is sent
|
|
out over the network, the NPort W2x50A series
|
|
device server will use the subnet mask to check
|
|
whether the TCP/IP host specified in the packet is
|
|
on the local network segment. If the address is on
|
|
the same network segment as the NPort W2x50A
|
|
series device server, a connection is established
|
|
directly from the NPort W2x50A series device
|
|
server. Otherwise, the connection is established
|
|
through the given default gateway."
|
|
::= { ethernetSetting 3 }
|
|
|
|
ethDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A gateway is a network computer that acts as an
|
|
entrance to another network. Usually, the computers
|
|
that control traffic within the network or at the
|
|
local Internet service provider are gateway nodes.
|
|
The NPort W2x50A series device server needs to
|
|
know the IP address of the default gateway computer
|
|
in order to communicate with the hosts outside the
|
|
local network environment. For correct gateway IP
|
|
address information, consult with the network
|
|
administrator."
|
|
::= { ethernetSetting 4 }
|
|
|
|
ethBridgeMode OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the bridge function."
|
|
::= { ethernetSetting 5 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> WLAN
|
|
-- -------------------------------------------------------------
|
|
|
|
wlanSetting OBJECT IDENTIFIER ::= { networkSetting 3 } -- 1.3.6.1.4.1.8691.2.13.1.3.3
|
|
|
|
wlanIpConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER { static(0), dhcp(1), bootp(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP configuration mode of the NPort. You can
|
|
choose from four possible IP configuration modes:
|
|
Static, DHCP, DHCP/BOOTP, BOOTP."
|
|
::= { wlanSetting 1 }
|
|
|
|
wlanIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An IP address is a number assigned to a network
|
|
device (such as a computer) as a permanent address
|
|
on the network. Computers use the IP address to
|
|
identify and talk to each other over the network.
|
|
Choose a proper IP address that is unique and valid
|
|
in your network environment."
|
|
::= { wlanSetting 2 }
|
|
|
|
wlanNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A subnet mask represents all of the network hosts
|
|
at one geographic location, in one building, or on
|
|
the same local area network. When a packet is sent
|
|
out over the network, the NPort W2x50A series
|
|
device server will use the subnet mask to check
|
|
whether the TCP/IP host specified in the packet is
|
|
on the local network segment. If the address is on
|
|
the same network segment as the NPort W2x50A
|
|
series device server, a connection is established
|
|
directly from the NPort W2x50A series device
|
|
server. Otherwise, the connection is established
|
|
through the given default gateway."
|
|
::= { wlanSetting 3 }
|
|
|
|
wlanDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A gateway is a network computer that acts as an
|
|
entrance to another network. Usually, the computers
|
|
that control traffic within the network or at the
|
|
local Internet service provider are gateway nodes.
|
|
The NPort W2x50A series device server needs to
|
|
know the IP address of the default gateway computer
|
|
in order to communicate with the hosts outside the
|
|
local network environment. For correct gateway IP
|
|
address information, consult with the network
|
|
administrator."
|
|
::= { wlanSetting 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> Profile
|
|
-- -------------------------------------------------------------
|
|
|
|
profileSetting OBJECT IDENTIFIER ::= { networkSetting 4 } -- 1.3.6.1.4.1.8691.2.13.1.3.4
|
|
|
|
networkType OBJECT-TYPE
|
|
SYNTAX INTEGER { ad-hoc(0), infrastructure(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select WLAN network type."
|
|
::= { profileSetting 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> Profile -> adhocProfile
|
|
-- -------------------------------------------------------------
|
|
|
|
adhocProfile OBJECT IDENTIFIER ::= { profileSetting 2 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.2
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> Profile -> adhocProfile -> General
|
|
-- -------------------------------------------------------------
|
|
|
|
adhocGeneralSetting OBJECT IDENTIFIER ::= { adhocProfile 1 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.2.1
|
|
|
|
adhocProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Assign profile name."
|
|
::= { adhocGeneralSetting 1 }
|
|
|
|
adhocRFType OBJECT-TYPE
|
|
SYNTAX INTEGER { w802_11b_g(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select WLAN network type."
|
|
::= { adhocGeneralSetting 2 }
|
|
|
|
adhocWlanSSID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set WLAN SSID"
|
|
::= { adhocGeneralSetting 3 }
|
|
|
|
adhocChannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display currently used channel. When in Ad-Hoc mode, this value can be set.
|
|
mode region possible channel
|
|
======================================
|
|
802.11b_g : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13"
|
|
::= { adhocGeneralSetting 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> Profile -> adhocProfile -> Security
|
|
-- -------------------------------------------------------------
|
|
|
|
adhocSecuritySetting OBJECT IDENTIFIER ::= { adhocProfile 2 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.2.2
|
|
|
|
adhocAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER { open-system(0) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless LAN autentication type."
|
|
::= { adhocSecuritySetting 1 }
|
|
|
|
adhocEncryption OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), wep(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set encryption type."
|
|
::= { adhocSecuritySetting 2 }
|
|
|
|
adhocWepKeyLength OBJECT-TYPE
|
|
SYNTAX INTEGER { key-64-bits(0), key-128-bits(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key length."
|
|
::= { adhocSecuritySetting 3 }
|
|
|
|
adhocWepKeyIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key index 1~4."
|
|
::= { adhocSecuritySetting 4 }
|
|
|
|
adhocWepKeyPassphrase OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..40))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key passphrase."
|
|
::= { adhocSecuritySetting 5 }
|
|
|
|
adhocWepKeyFormat OBJECT-TYPE
|
|
SYNTAX INTEGER { ascii(0), hex(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key format."
|
|
::= { adhocSecuritySetting 6 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> Profile -> infrastructureProfile
|
|
-- -------------------------------------------------------------
|
|
|
|
infrastructureProfile OBJECT IDENTIFIER ::= { profileSetting 3 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.3
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> Profile -> infrastructureProfile -> General
|
|
-- -------------------------------------------------------------
|
|
|
|
infraGeneralSetting OBJECT IDENTIFIER ::= { infrastructureProfile 1 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.3.1
|
|
|
|
infraGeneralSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF InfraGeneralSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WLAN profile general setting table."
|
|
::= { infraGeneralSetting 1 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1
|
|
|
|
infraGeneralSettingEntry OBJECT-TYPE
|
|
SYNTAX InfraGeneralSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WLAN profile general setting entry."
|
|
INDEX { profileIndex }
|
|
::= { infraGeneralSettingTable 1 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1
|
|
|
|
InfraGeneralSettingEntry ::=
|
|
SEQUENCE {
|
|
profileIndex
|
|
INTEGER,
|
|
profileName
|
|
DisplayString,
|
|
profileRFType
|
|
INTEGER,
|
|
profileWlanSSID
|
|
DisplayString
|
|
}
|
|
|
|
profileIndex OBJECT-TYPE
|
|
SYNTAX INTEGER { profile1(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The profile index"
|
|
::= { infraGeneralSettingEntry 1 }
|
|
|
|
profileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Assign profile name."
|
|
::= { infraGeneralSettingEntry 2 }
|
|
|
|
profileRFType OBJECT-TYPE
|
|
SYNTAX INTEGER { auto(0), w802_11a(1), w802_11b_g(2), w802_11a_n(3), w802_11b_g_n(4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select WLAN network type."
|
|
::= { infraGeneralSettingEntry 3 }
|
|
|
|
profileWlanSSID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set WLAN SSID"
|
|
::= { infraGeneralSettingEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> Profile -> infrastructureProfile -> Security
|
|
-- -------------------------------------------------------------
|
|
|
|
securitySetting OBJECT IDENTIFIER ::= { infrastructureProfile 2 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.3.2
|
|
|
|
securitySettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SecuritySettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WLAN profile security setting table."
|
|
::= { securitySetting 1 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1
|
|
|
|
securitySettingEntry OBJECT-TYPE
|
|
SYNTAX SecuritySettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WLAN profile security setting entry."
|
|
INDEX { profileIndex }
|
|
::= { securitySettingTable 1 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1
|
|
|
|
SecuritySettingEntry ::=
|
|
SEQUENCE {
|
|
authentication
|
|
INTEGER,
|
|
encryption
|
|
INTEGER,
|
|
wepKeyLength
|
|
INTEGER,
|
|
wepKeyIndex
|
|
INTEGER,
|
|
wepKeyPassphrase
|
|
DisplayString,
|
|
wepKeyFormat
|
|
INTEGER,
|
|
eapMethod
|
|
INTEGER,
|
|
tunneledAuth
|
|
INTEGER,
|
|
wpaUsername
|
|
DisplayString,
|
|
wpaAnonymousUsername
|
|
DisplayString,
|
|
verifyServerCert
|
|
INTEGER,
|
|
trustedServerCert
|
|
INTEGER,
|
|
userCert
|
|
INTEGER,
|
|
userPrivateKey
|
|
INTEGER
|
|
}
|
|
|
|
authentication OBJECT-TYPE
|
|
SYNTAX INTEGER { open-system(0), shared-key(1), wpa(2), wpa-psk(3), wpa2(4), wpa2-psk(5) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wireless LAN autentication type."
|
|
::= { securitySettingEntry 1 }
|
|
|
|
encryption OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), wep(1), tkip(2), aes-ccmp(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set encryption type. Selection rule is as following.
|
|
authentication selectable encryption
|
|
============== =====================
|
|
open-system(0) disable(0), wep(1)
|
|
shared-key(1) wep(1)
|
|
wpa(2), wpa-psk(3) tkip(2), aes-ccmp(3)
|
|
wpa2(4), wpa2-psk(5) tkip(2), aes-ccmp(3)
|
|
"
|
|
::= { securitySettingEntry 2 }
|
|
|
|
wepKeyLength OBJECT-TYPE
|
|
SYNTAX INTEGER { key-64-bits(0), key-128-bits(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key length."
|
|
::= { securitySettingEntry 3 }
|
|
|
|
wepKeyIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key index 1~4."
|
|
::= { securitySettingEntry 4 }
|
|
|
|
wepKeyPassphrase OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..40))
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key passphrase."
|
|
::= { securitySettingEntry 5 }
|
|
|
|
wepKeyFormat OBJECT-TYPE
|
|
SYNTAX INTEGER { ascii(0), hex(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WEP key format."
|
|
::= { securitySettingEntry 6 }
|
|
|
|
eapMethod OBJECT-TYPE
|
|
SYNTAX INTEGER { tls(0), peap(1), ttls(2), leap(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"EAP method for WPA and WPA2 authentication."
|
|
::= { securitySettingEntry 12 }
|
|
|
|
tunneledAuth OBJECT-TYPE
|
|
SYNTAX INTEGER { gtc(0), md5(1), pap(2), chap(3), mschap(4), mschapv2(5), tls(6), eap-tls(7), eap-mschapv2(8), eap-gtc(9), eap-md5(10) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set tunneled authentication protocol when PEAP/TTLS is selected as EAP method.
|
|
EAP method selectable tunneled authentication
|
|
========== ==================================
|
|
peap(1) gtc(0), md5(1), mschapv2(5)
|
|
ttls(2) pap(2), chap(3), mschap(4), mschapv2(5),
|
|
eap-mschapv2(8), eap-gtc(9), eap-md5(10)
|
|
"
|
|
::= { securitySettingEntry 13 }
|
|
|
|
wpaUsername OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WPA username for WPA and WPA2 authentication."
|
|
::= { securitySettingEntry 14 }
|
|
|
|
wpaAnonymousUsername OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Anonymous username needed when TTLS is selected as EAP method."
|
|
::= { securitySettingEntry 16 }
|
|
|
|
verifyServerCert OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The setting of verify server certificate."
|
|
::= { securitySettingEntry 17 }
|
|
|
|
trustedServerCert OBJECT-TYPE
|
|
SYNTAX INTEGER { not-installed(0), installed(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display whether or not trusted server certificate is installed."
|
|
::= { securitySettingEntry 18 }
|
|
|
|
userCert OBJECT-TYPE
|
|
SYNTAX INTEGER { not-installed(0), installed(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display whether or not user certificate is installed."
|
|
::= { securitySettingEntry 19 }
|
|
|
|
userPrivateKey OBJECT-TYPE
|
|
SYNTAX INTEGER { not-installed(0), installed(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display whether or not user private key is installed."
|
|
::= { securitySettingEntry 20 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> Profile -> infrastructureProfile -> Sort
|
|
-- -------------------------------------------------------------
|
|
|
|
fastRoamingSetting OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The setting of fast roaming."
|
|
::= { infrastructureProfile 3 } -- 1.3.6.1.4.1.8691.2.13.1.3.4.3.3
|
|
|
|
fastRoamingScanChannels1 OBJECT-TYPE
|
|
SYNTAX INTEGER { n_a(0), channel_1(1), channel_2(2), channel_3(3), channel_4(4), channel_5(5), channel_6(6), channel_7(7), channel_8(8), channel_9(9), channel_10(10), channel_11(11), channel_12(12), channel_13(13), channel_36(15), channel_40(16), channel_44(17), channel_48(18), channel_52(19), channel_56(20),channel_60(21), channel_64(22), channel_100(23), channel_104(24), channel_108(25), channel_112(26), channel_116(27), channel_120(28), channel_124(29), channel_128(30), channel_132(31), channel_136(32), channel_140(33), channel_149(34), channel_153(35), channel_157(36), channel_161(37), channel_165(38)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The scan channels of fast roaming. 0 represents 'N/A'
|
|
======================================================
|
|
Auot channel : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
|
|
802.11a, 802.11a_n : 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
|
|
802.11b_g, 802.11b_g_n : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13"
|
|
::= { infrastructureProfile 4 }
|
|
|
|
fastRoamingScanChannels2 OBJECT-TYPE
|
|
SYNTAX INTEGER { n_a(0), channel_1(1), channel_2(2), channel_3(3), channel_4(4), channel_5(5), channel_6(6), channel_7(7), channel_8(8), channel_9(9), channel_10(10), channel_11(11), channel_12(12), channel_13(13), channel_36(15), channel_40(16), channel_44(17), channel_48(18), channel_52(19), channel_56(20),channel_60(21), channel_64(22), channel_100(23), channel_104(24), channel_108(25), channel_112(26), channel_116(27), channel_120(28), channel_124(29), channel_128(30), channel_132(31), channel_136(32), channel_140(33), channel_149(34), channel_153(35), channel_157(36), channel_161(37), channel_165(38)}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The scan channels of fast roaming. 0 represents 'N/A'
|
|
======================================================
|
|
Auot channel : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
|
|
802.11a, 802.11a_n : 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
|
|
802.11b_g, 802.11b_g_n : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13"
|
|
::= { infrastructureProfile 5 }
|
|
|
|
fastRoamingScanChannels3 OBJECT-TYPE
|
|
SYNTAX INTEGER { n_a(0), channel_1(1), channel_2(2), channel_3(3), channel_4(4), channel_5(5), channel_6(6), channel_7(7), channel_8(8), channel_9(9), channel_10(10), channel_11(11), channel_12(12), channel_13(13), channel_36(15), channel_40(16), channel_44(17), channel_48(18), channel_52(19), channel_56(20),channel_60(21), channel_64(22), channel_100(23), channel_104(24), channel_108(25), channel_112(26), channel_116(27), channel_120(28), channel_124(29), channel_128(30), channel_132(31), channel_136(32), channel_140(33), channel_149(34), channel_153(35), channel_157(36), channel_161(37), channel_165(38)}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The scan channels of fast roaming. 0 represents 'N/A'
|
|
======================================================
|
|
Auot channel : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
|
|
802.11a, 802.11a_n : 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
|
|
802.11b_g, 802.11b_g_n : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13"
|
|
::= { infrastructureProfile 6 }
|
|
|
|
fastRoamingThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (-70..-40)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Roaming threshold of fast roaming"
|
|
::= { infrastructureProfile 7 }
|
|
|
|
fastRoamingDifference OBJECT-TYPE
|
|
SYNTAX INTEGER (2..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Roaming difference of fast roaming"
|
|
::= { infrastructureProfile 8 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> WLAN Log
|
|
-- -------------------------------------------------------------
|
|
|
|
wlanLogSetting OBJECT IDENTIFIER ::= { networkSetting 5 } -- 1.3.6.1.4.1.8691.2.13.1.3.5
|
|
|
|
wlanLogEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable WLAN log"
|
|
::= { wlanLogSetting 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Network settings -> Advanced
|
|
-- -------------------------------------------------------------
|
|
|
|
advancedSetting OBJECT IDENTIFIER ::= { networkSetting 6 } -- 1.3.6.1.4.1.8691.2.13.1.3.6
|
|
|
|
gratuitousArp OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the gratuitous ARP function. For some
|
|
applications, users need the NPort W2x50A series
|
|
device server to send broadcast packets to update
|
|
the ARP table on the server. If the customer enables
|
|
this function and sets the send period, the NPort W2x50A
|
|
series device server will send broadcast
|
|
packets periodically."
|
|
::= { advancedSetting 1 }
|
|
|
|
gratuitousArpSendPeriod OBJECT-TYPE
|
|
SYNTAX INTEGER (10..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The send period of the gratuitous ARP function.
|
|
Range: 10 ~ 1000 sec.
|
|
"
|
|
::= { advancedSetting 2 }
|
|
|
|
gratuitousArpIpAddress1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the static gratuitous ARP."
|
|
::= { advancedSetting 3 }
|
|
|
|
gratuitousArpMacAddress1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the static gratuitous ARP."
|
|
::= { advancedSetting 4 }
|
|
|
|
gratuitousArpIpAddress2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the static gratuitous ARP."
|
|
::= { advancedSetting 5 }
|
|
|
|
gratuitousArpMacAddress2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the static gratuitous ARP."
|
|
::= { advancedSetting 6 }
|
|
|
|
gratuitousArpIpAddress3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the static gratuitous ARP."
|
|
::= { advancedSetting 7 }
|
|
|
|
gratuitousArpMacAddress3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the static gratuitous ARP."
|
|
::= { advancedSetting 8 }
|
|
|
|
gratuitousArpIpAddress4 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the static gratuitous ARP."
|
|
::= { advancedSetting 9 }
|
|
|
|
gratuitousArpMacAddress4 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the static gratuitous ARP."
|
|
::= { advancedSetting 10 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Serial port settings
|
|
-- -------------------------------------------------------------
|
|
|
|
portSetting OBJECT IDENTIFIER ::= { swMgmt 4 } -- 1.3.6.1.4.1.8691.2.13.1.4
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings
|
|
-- -------------------------------------------------------------
|
|
|
|
opModeSetting OBJECT IDENTIFIER ::= { portSetting 1 } -- 1.3.6.1.4.1.8691.2.13.1.4.1
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Modes
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
opMode OBJECT IDENTIFIER ::= { opModeSetting 1 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.1
|
|
|
|
opModePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF OpModePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial ports' operation mode table."
|
|
::= { opMode 1 }
|
|
|
|
opModePortEntry OBJECT-TYPE
|
|
SYNTAX OpModePortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial port's operation mode entry."
|
|
INDEX { portIndex }
|
|
::= { opModePortTable 1 }
|
|
|
|
OpModePortEntry ::=
|
|
SEQUENCE {
|
|
portIndex
|
|
INTEGER,
|
|
portMode
|
|
INTEGER
|
|
}
|
|
|
|
portIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial port index."
|
|
::= { opModePortEntry 1 }
|
|
|
|
portMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pair-connection-slave(0),
|
|
pair-connection-master(1),
|
|
real-Com(2),
|
|
disable(7),
|
|
tcp-Server(10),
|
|
ethernet-modem(12),
|
|
tcp-Client(13),
|
|
udp(14),
|
|
rfc-2217(20),
|
|
reverse-Terminal(21)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation mode of the serial port. Note that
|
|
changing this setting may also change the application."
|
|
::= { opModePortEntry 2 }
|
|
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Mode Parameters
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
opModeParam OBJECT IDENTIFIER ::= { opModeSetting 2 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.2
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Mode Parameters -> Real COM
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
realCOM OBJECT IDENTIFIER ::= { opModeParam 1 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.2.1
|
|
|
|
realCOMTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RealCOMEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Real COM mode table."
|
|
::= { realCOM 1 }
|
|
|
|
realCOMEntry OBJECT-TYPE
|
|
SYNTAX RealCOMEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Real COM mode entry."
|
|
INDEX { portIndex }
|
|
::= { realCOMTable 1 }
|
|
|
|
RealCOMEntry ::=
|
|
SEQUENCE {
|
|
realCOMTcpAliveCheck
|
|
INTEGER,
|
|
realCOMMaxConnection
|
|
INTEGER,
|
|
realCOMIgnoreJammedIp
|
|
INTEGER,
|
|
realCOMAllowDriverControl
|
|
INTEGER,
|
|
realCOMConnectionDownRTS
|
|
INTEGER,
|
|
realCOMConnectionDownDTR
|
|
INTEGER
|
|
}
|
|
|
|
realCOMTcpAliveCheck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP alive check time.
|
|
0 min: TCP connection will not be closed when the
|
|
TCP connection is idle.
|
|
1 to 99 min: The NPort W2x50A series device server
|
|
automatically closes the TCP connection if there is
|
|
no TCP activity for the given time. After the
|
|
connection is closed, the NPort W2x50A series device
|
|
server starts listening for another Real COM driver
|
|
Connection."
|
|
::= { realCOMEntry 1 }
|
|
|
|
realCOMMaxConnection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max connection is usually used when the user needs
|
|
to receive data from different hosts simultaneously.
|
|
The factory default is 1. In this case, only one
|
|
specific host can access this port of the NPort
|
|
W2x50A series device server, and the Real COM driver
|
|
on that host will have full control over the port.
|
|
Max. connection = 1:
|
|
Allows only a single host's Real COM driver to open
|
|
the specific NPort W2x50A series device server's
|
|
serial port.
|
|
Max connection = 2 to 8:
|
|
Allows 2 to 8 hosts' Real COM drivers to open the
|
|
specific NPort W2x50A series device server's
|
|
serial port, at the same time. When multiple hosts'
|
|
Real COM drivers open the serial port at the same
|
|
time, the COM driver only provides a pure data tunnel
|
|
without control ability. The serial port parameter
|
|
will use the firmware settings instead of getting
|
|
the settings from your application program (AP)."
|
|
::= { realCOMEntry 2 }
|
|
|
|
realCOMIgnoreJammedIp OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Previously, when Max connection was set to a value
|
|
greater than 1, and the serial device was
|
|
transmitting data, if any one of the connected hosts
|
|
stopped responding, the serial device would wait
|
|
until the data had been transmitted successfully
|
|
before transmitting the second group of data to all
|
|
hosts. Currently, if you select Yes for 'Ignore
|
|
jammed IP,' the host that is not responding will be
|
|
ignored, but the data will still be transmitted to
|
|
the other hosts."
|
|
::= { realCOMEntry 3 }
|
|
|
|
realCOMAllowDriverControl OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If Max connection is greater than 1, NPort will
|
|
ignore driver control commands from all connected
|
|
hosts. However, if you set Allow driver control to
|
|
YES, control commands will be accepted. Note that
|
|
since the NPort W2x50A series device server may get
|
|
configuration changes from multiple hosts, the most
|
|
recent command received will take precedence."
|
|
::= { realCOMEntry 4 }
|
|
|
|
realCOMConnectionDownRTS OBJECT-TYPE
|
|
SYNTAX INTEGER { always-low(1), always-high(0) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For some applications, serial devices must obtain
|
|
the Ethernet link status by reading the RTS signal from the
|
|
NPort W2x50A series device server. If this setting is
|
|
set to 'always low,' RTS will change its state to
|
|
low if the Ethernet link is off."
|
|
::= { realCOMEntry 5 }
|
|
|
|
realCOMConnectionDownDTR OBJECT-TYPE
|
|
SYNTAX INTEGER { always-low(1), always-high(0) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For some applications, serial devices must obtain
|
|
the Ethernet link status by reading the DTR signal from the
|
|
NPort W2x50A series device server. If this setting is
|
|
set to 'always low,' DTR will change its state to
|
|
low if the Ethernet link is off."
|
|
::= { realCOMEntry 6 }
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Mode Parameters -> RFC2217
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
rfc2217 OBJECT IDENTIFIER ::= { opModeParam 2 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.2.2
|
|
|
|
rfc2217Table OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Rfc2217Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RFC2217 mode table."
|
|
::= { rfc2217 1 }
|
|
|
|
rfc2217Entry OBJECT-TYPE
|
|
SYNTAX Rfc2217Entry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RFC2217 mode entry."
|
|
INDEX { portIndex }
|
|
::= { rfc2217Table 1 }
|
|
|
|
Rfc2217Entry ::=
|
|
SEQUENCE {
|
|
rfc2217TcpAliveCheck
|
|
INTEGER,
|
|
rfc2217TcpPort
|
|
INTEGER
|
|
}
|
|
|
|
rfc2217TcpAliveCheck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP alive check time.
|
|
0 min: TCP connection will not be closed when the
|
|
TCP connection is idle.
|
|
1 to 99 min: The NPort W2x50A series device server
|
|
automatically closes the TCP connection if there is
|
|
no TCP activity for the given time. After the
|
|
connection is closed, the NPort W2x50A series
|
|
device server starts listening for another TCP Connection."
|
|
::= { rfc2217Entry 1 }
|
|
|
|
rfc2217TcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TCP server port of RFC2217."
|
|
::= { rfc2217Entry 2 }
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Mode Parameters -> TCP Server
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
tcpServer OBJECT IDENTIFIER ::= { opModeParam 3 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.2.3
|
|
|
|
tcpServerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP server mode table."
|
|
::= { tcpServer 1 }
|
|
|
|
tcpServerEntry OBJECT-TYPE
|
|
SYNTAX TcpServerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP server mode entry."
|
|
INDEX { portIndex }
|
|
::= { tcpServerTable 1 }
|
|
|
|
TcpServerEntry ::=
|
|
SEQUENCE {
|
|
tcpServerTcpAliveCheck
|
|
INTEGER,
|
|
tcpServerInactivityTime
|
|
INTEGER,
|
|
tcpServerMaxConnection
|
|
INTEGER,
|
|
tcpServerIgnoreJammedIp
|
|
INTEGER,
|
|
tcpServerAllowDriverControl
|
|
INTEGER,
|
|
tcpServerTcpPort
|
|
INTEGER,
|
|
tcpServerCmdPort
|
|
INTEGER,
|
|
tcpServerConnectionDownRTS
|
|
INTEGER,
|
|
tcpServerConnectionDownDTR
|
|
INTEGER
|
|
}
|
|
|
|
tcpServerTcpAliveCheck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP alive check time.
|
|
0 min: TCP connection will not be closed when the
|
|
TCP connection is idle.
|
|
1 to 99 min: The NPort W2x50A series device server
|
|
automatically closes the TCP connection if there is
|
|
no TCP activity for the given time. After the
|
|
connection is closed, the NPort W2x50A series device
|
|
server starts listening for another TCP Connection."
|
|
::= { tcpServerEntry 1 }
|
|
|
|
tcpServerInactivityTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0 ms: TCP connection is not closed when the
|
|
serial line is idle.
|
|
1-65535 ms: The NPort W2x50A series device server
|
|
automatically closes the TCP connection if there is
|
|
no serial data activity for the given time. After
|
|
the connection is closed, the NPort W2x50A series
|
|
device server starts listening for another
|
|
TCP connection."
|
|
::= { tcpServerEntry 2 }
|
|
|
|
tcpServerMaxConnection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max connection is usually used when the user needs
|
|
to receive data from different hosts simultaneously.
|
|
The factory default is 1. In this case, only one
|
|
specific host can access this port of the NPort
|
|
W2x50A series device server, and the TCP server driver
|
|
on that host will have full control over the port.
|
|
Max. connection 1:
|
|
Allows only a single host's to connect specific
|
|
NPort W2x50A series device
|
|
Max connection 2 to 8:
|
|
Allows 2 to 8 hosts' to conncect NPort W2x50A series
|
|
device at the same time."
|
|
::= { tcpServerEntry 3 }
|
|
|
|
tcpServerIgnoreJammedIp OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Previously, when Max connection was set to a value
|
|
greater than 1, and the serial device was
|
|
transmitting data, if any one of the connected hosts
|
|
stopped responding, the serial device would wait
|
|
until the data had been transmitted successfully
|
|
before transmitting the second group of data to all
|
|
hosts. Currently, if you select Yes for 'Ignore
|
|
jammed IP,' the host that is not responding will be
|
|
ignored, but the data will still be transmitted to
|
|
the other hosts."
|
|
::= { tcpServerEntry 4 }
|
|
|
|
tcpServerAllowDriverControl OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If Max connection is greater than 1, NPort will
|
|
ignore driver control commands from all connected
|
|
hosts. However, if you set Allow driver control to
|
|
YES, control commands will be accepted. Note that
|
|
since the NPort W2x50A series device server may
|
|
get configuration changes from multiple hosts, the
|
|
most recent command received will take precedence."
|
|
::= { tcpServerEntry 5 }
|
|
|
|
tcpServerTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 'TCP port' is the TCP port that the NPort
|
|
W2x50A series device server uses to listen to
|
|
connections, and that other devices must use to
|
|
contact the NPort W2x50A series device server."
|
|
::= { tcpServerEntry 6 }
|
|
|
|
tcpServerCmdPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 'Command port' is a TCP port used to listen for
|
|
SSDK commands from the host. In order to
|
|
prevent a TCP port conflict with other applications,
|
|
the user can set the Command port to another port
|
|
if needed."
|
|
::= { tcpServerEntry 7 }
|
|
|
|
tcpServerConnectionDownRTS OBJECT-TYPE
|
|
SYNTAX INTEGER { always-low(1), always-high(0) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For some applications, serial devices must obtain
|
|
the Ethernet link status from the RTS signal sent by the
|
|
NPort W2x50A series device server. If this setting is
|
|
set to 'goes low,' RTS will change the state to
|
|
low if the Ethernet link is off."
|
|
::= { tcpServerEntry 8 }
|
|
|
|
tcpServerConnectionDownDTR OBJECT-TYPE
|
|
SYNTAX INTEGER { always-low(1), always-high(0) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For some applications, serial devices must obtain
|
|
the Ethernet link status from the DTR signal sent by the
|
|
NPort W2x50A series device server. If this setting is
|
|
set to 'goes low,' DTR will change the state to
|
|
low if the Ethernet link is off."
|
|
::= { tcpServerEntry 9 }
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Mode Parameters -> TCP Client
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
tcpClient OBJECT IDENTIFIER ::= { opModeParam 4 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.2.4
|
|
|
|
tcpClientTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TcpClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP client mode table."
|
|
::= { tcpClient 1 }
|
|
|
|
tcpClientEntry OBJECT-TYPE
|
|
SYNTAX TcpClientEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP client mode entry."
|
|
INDEX { portIndex }
|
|
::= { tcpClientTable 1 }
|
|
|
|
TcpClientEntry ::=
|
|
SEQUENCE {
|
|
tcpClientTcpAliveCheck
|
|
INTEGER,
|
|
tcpClientInactivityTime
|
|
INTEGER,
|
|
tcpClientIgnoreJammedIp
|
|
INTEGER,
|
|
tcpClientDestinationAddress1
|
|
DisplayString,
|
|
tcpClientDestinationPort1
|
|
INTEGER,
|
|
tcpClientDestinationAddress2
|
|
DisplayString,
|
|
tcpClientDestinationPort2
|
|
INTEGER,
|
|
tcpClientDestinationAddress3
|
|
DisplayString,
|
|
tcpClientDestinationPort3
|
|
INTEGER,
|
|
tcpClientDestinationAddress4
|
|
DisplayString,
|
|
tcpClientDestinationPort4
|
|
INTEGER,
|
|
tcpClientDesignatedLocalPort1
|
|
INTEGER,
|
|
tcpClientDesignatedLocalPort2
|
|
INTEGER,
|
|
tcpClientDesignatedLocalPort3
|
|
INTEGER,
|
|
tcpClientDesignatedLocalPort4
|
|
INTEGER,
|
|
tcpClientConnectionControl
|
|
INTEGER
|
|
}
|
|
|
|
tcpClientTcpAliveCheck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP alive check time.
|
|
0 min: TCP connection will not be closed when the
|
|
TCP connection is idle.
|
|
1 to 99 min: The NPort W2x50A series device client
|
|
automatically closes the TCP connection if there is
|
|
no TCP activity for the given time."
|
|
::= { tcpClientEntry 1 }
|
|
|
|
tcpClientInactivityTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0 ms: TCP connection is not closed when the
|
|
serial line is idle.
|
|
1-65535 ms: The NPort W2x50A series device client
|
|
automatically closes the TCP connection if there is
|
|
no serial data activity for the given time."
|
|
::= { tcpClientEntry 2 }
|
|
|
|
tcpClientIgnoreJammedIp OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Previously, when Max connection was set to a value
|
|
greater than 1, and the serial device was
|
|
transmitting data, if any one of the connected hosts
|
|
stopped responding, the serial device would wait
|
|
until the data had been transmitted successfully
|
|
before transmitting the second group of data to all
|
|
hosts. Currently, if you select Yes for 'Ignore
|
|
jammed IP,' the host that is not responding will be
|
|
ignored, but the data will still be transmitted to
|
|
the other hosts."
|
|
::= { tcpClientEntry 3 }
|
|
|
|
tcpClientDestinationAddress1 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can connect
|
|
actively to a remote host that has this IP address."
|
|
::= { tcpClientEntry 4 }
|
|
|
|
tcpClientDestinationPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can connect
|
|
actively to a remote host that has this TCP port number."
|
|
::= { tcpClientEntry 5 }
|
|
|
|
tcpClientDestinationAddress2 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can
|
|
connect actively to a remote host that has this IP
|
|
address."
|
|
::= { tcpClientEntry 6 }
|
|
|
|
tcpClientDestinationPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can
|
|
connect actively to a remote host that
|
|
has this TCP port number."
|
|
::= { tcpClientEntry 7 }
|
|
|
|
tcpClientDestinationAddress3 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can
|
|
connect actively to a remote host that
|
|
has this IP address."
|
|
::= { tcpClientEntry 8 }
|
|
|
|
tcpClientDestinationPort3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can
|
|
connect actively to a remote host that
|
|
has this port number."
|
|
::= { tcpClientEntry 9 }
|
|
|
|
tcpClientDestinationAddress4 OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can
|
|
connect actively to a remote host that
|
|
has this IP address."
|
|
::= { tcpClientEntry 10 }
|
|
|
|
tcpClientDestinationPort4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can
|
|
connect actively to a remote host that
|
|
has this port number."
|
|
::= { tcpClientEntry 11 }
|
|
|
|
tcpClientDesignatedLocalPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local TCP port used to connect actively to the
|
|
remote host."
|
|
::= { tcpClientEntry 12 }
|
|
|
|
tcpClientDesignatedLocalPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local TCP port used to connect actively to the
|
|
remote host."
|
|
::= { tcpClientEntry 13 }
|
|
|
|
tcpClientDesignatedLocalPort3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local TCP port used to connect actively to the
|
|
remote host."
|
|
::= { tcpClientEntry 14 }
|
|
|
|
tcpClientDesignatedLocalPort4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local TCP port used to connect actively to the
|
|
remote host."
|
|
::= { tcpClientEntry 15 }
|
|
|
|
tcpClientConnectionControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
startup-None(257),
|
|
anyCharacter-None(258),
|
|
anyCharacter-InactivityTime(514),
|
|
dsrOn-DSR-Off(1028),
|
|
dsrOn-None(260),
|
|
dcdOn-DCD-Off(2056),
|
|
dcdOn-None(264)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Events that cause the TCP client to drop the
|
|
connection."
|
|
::= { tcpClientEntry 16 }
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Mode Parameters -> UDP
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
udp OBJECT IDENTIFIER ::= { opModeParam 5 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.2.5
|
|
|
|
udpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UdpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP mode table."
|
|
::= { udp 1 }
|
|
|
|
udpEntry OBJECT-TYPE
|
|
SYNTAX UdpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP mode entry."
|
|
INDEX { portIndex }
|
|
::= { udpTable 1 }
|
|
|
|
UdpEntry ::=
|
|
SEQUENCE {
|
|
udpDestinationAddress1Begin
|
|
IpAddress,
|
|
udpDestinationAddress1End
|
|
IpAddress,
|
|
udpDestinationPort1
|
|
INTEGER,
|
|
udpDestinationAddress2Begin
|
|
IpAddress,
|
|
udpDestinationAddress2End
|
|
IpAddress,
|
|
udpDestinationPort2
|
|
INTEGER,
|
|
udpDestinationAddress3Begin
|
|
IpAddress,
|
|
udpDestinationAddress3End
|
|
IpAddress,
|
|
udpDestinationPort3
|
|
INTEGER,
|
|
udpDestinationAddress4Begin
|
|
IpAddress,
|
|
udpDestinationAddress4End
|
|
IpAddress,
|
|
udpDestinationPort4
|
|
INTEGER,
|
|
udpLocalListenPort
|
|
INTEGER
|
|
}
|
|
|
|
udpDestinationAddress1Begin OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to remote hosts whose IP addresses
|
|
are in the range between this parameter and
|
|
udpDestinationAddress1End."
|
|
::= { udpEntry 1 }
|
|
|
|
udpDestinationAddress1End OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to remote hosts whose IP addresses
|
|
are in the range between udpDestinationAddress1Begin
|
|
and this parameter."
|
|
::= { udpEntry 2 }
|
|
|
|
udpDestinationPort1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to remote hosts that have this UDP port
|
|
number."
|
|
::= { udpEntry 3 }
|
|
|
|
udpDestinationAddress2Begin OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to remote hosts whose IP addresses
|
|
are in the range between this parameter and
|
|
udpDestinationAddress2End."
|
|
::= { udpEntry 4 }
|
|
|
|
udpDestinationAddress2End OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to the remote hosts whose IP addresses
|
|
are in the range between udpDestinationAddress2Begin
|
|
and this parameter."
|
|
::= { udpEntry 5 }
|
|
|
|
udpDestinationPort2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to the remote hosts that have this
|
|
UDP port number."
|
|
::= { udpEntry 6 }
|
|
|
|
udpDestinationAddress3Begin OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to remote hosts whose IP addresses
|
|
are in the range between this parameter and
|
|
udpDestinationAddress3End."
|
|
::= { udpEntry 7 }
|
|
|
|
udpDestinationAddress3End OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to remote hosts whose IP addresses
|
|
are in the range between udpDestinationAddress3Begin
|
|
and this parameter."
|
|
::= { udpEntry 8 }
|
|
|
|
udpDestinationPort3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to remote hosts that have this UDP
|
|
port number."
|
|
::= { udpEntry 9 }
|
|
|
|
udpDestinationAddress4Begin OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to remote hosts whose IP addresses
|
|
are in the range between this parameter and
|
|
udpDestinationAddress4End."
|
|
::= { udpEntry 10 }
|
|
|
|
udpDestinationAddress4End OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to remote hosts whose IP addresses
|
|
are in the range between udpDestinationAddress4Begin
|
|
and this parameter."
|
|
::= { udpEntry 11 }
|
|
|
|
udpDestinationPort4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NPort W2x50A series device server can actively
|
|
send UDP packets to remote hosts that have this
|
|
UDP port number."
|
|
::= { udpEntry 12 }
|
|
|
|
udpLocalListenPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP port that the NPort W2x50A series device
|
|
server listens to and that other devices must use
|
|
to contact the NPort W2x50A series device server."
|
|
::= { udpEntry 13 }
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Mode Parameters -> Pair Connection Master
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
pairConnectionMaster OBJECT IDENTIFIER ::= { opModeParam 6 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.2.6
|
|
|
|
pairConnectionMasterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PairConnectionMasterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pair connection master mode table."
|
|
::= { pairConnectionMaster 1 }
|
|
|
|
pairConnectionMasterEntry OBJECT-TYPE
|
|
SYNTAX PairConnectionMasterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pair connection master mode entry."
|
|
INDEX { portIndex }
|
|
::= { pairConnectionMasterTable 1 }
|
|
|
|
PairConnectionMasterEntry ::=
|
|
SEQUENCE {
|
|
pairConnectionMasterTcpAliveCheck
|
|
INTEGER,
|
|
pairConnectionMasterDestnationAddress
|
|
DisplayString,
|
|
pairConnectionMasterDestnationTcpPort
|
|
INTEGER
|
|
}
|
|
|
|
pairConnectionMasterTcpAliveCheck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP alive check time.
|
|
0 min: TCP connection will not be closed when the
|
|
TCP connection is idle.
|
|
1 to 99 min: The NPort W2x50A series device server
|
|
automatically closes the TCP connection if there is
|
|
no TCP activity for the given time. After the
|
|
connection is closed, the NPort W2x50A series device
|
|
server starts connecting again."
|
|
::= { pairConnectionMasterEntry 1 }
|
|
|
|
pairConnectionMasterDestnationAddress OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of pair connection slave."
|
|
::= { pairConnectionMasterEntry 2 }
|
|
|
|
pairConnectionMasterDestnationTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TCP port of pair connection slave."
|
|
::= { pairConnectionMasterEntry 3 }
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Mode Parameters -> Pair Connection Slave
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
pairConnectionSlave OBJECT IDENTIFIER ::= { opModeParam 7 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.2.7
|
|
|
|
pairConnectionSlaveTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PairConnectionSlaveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pair connection slave mode table."
|
|
::= { pairConnectionSlave 1 }
|
|
|
|
pairConnectionSlaveEntry OBJECT-TYPE
|
|
SYNTAX PairConnectionSlaveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The pair connection slave mode entry."
|
|
INDEX { portIndex }
|
|
::= { pairConnectionSlaveTable 1 }
|
|
|
|
PairConnectionSlaveEntry ::=
|
|
SEQUENCE {
|
|
pairConnectionSlaveTcpAliveCheck
|
|
INTEGER,
|
|
pairConnectionSlaveLocalTcpPort
|
|
INTEGER
|
|
}
|
|
|
|
pairConnectionSlaveTcpAliveCheck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP alive check time.
|
|
0 min: TCP connection will not be closed when the
|
|
TCP connection is idle.
|
|
1 to 99 min: The NPort W2x50A series device server
|
|
automatically closes the TCP connection if there is
|
|
no TCP activity for the given time. After the
|
|
connection is closed, the NPort W2x50A series
|
|
device server starts listening for another TCP Connection."
|
|
::= { pairConnectionSlaveEntry 1 }
|
|
|
|
pairConnectionSlaveLocalTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TCP server port of pair connection slave."
|
|
::= { pairConnectionSlaveEntry 2 }
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Mode Parameters -> Ethernet Modem
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
ethernetModem OBJECT IDENTIFIER ::= { opModeParam 8 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.2.8
|
|
|
|
ethernetModemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EthernetModemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet modem mode table."
|
|
::= { ethernetModem 1 }
|
|
|
|
ethernetModemEntry OBJECT-TYPE
|
|
SYNTAX EthernetModemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet modem mode entry."
|
|
INDEX { portIndex }
|
|
::= { ethernetModemTable 1 }
|
|
|
|
EthernetModemEntry ::=
|
|
SEQUENCE {
|
|
ethernetModemTcpAliveCheck
|
|
INTEGER,
|
|
ethernetModemLocalTcpPort
|
|
INTEGER
|
|
}
|
|
|
|
ethernetModemTcpAliveCheck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP alive check time.
|
|
0 min: TCP connection will not be closed when the
|
|
TCP connection is idle.
|
|
1 to 99 min: The NPort W2x50A series device server
|
|
automatically closes the TCP connection if there is
|
|
no TCP activity for the given time."
|
|
::= { ethernetModemEntry 1 }
|
|
|
|
ethernetModemLocalTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TCP server port of ethernet modem."
|
|
::= { ethernetModemEntry 2 }
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Operation Mode Parameters -> Reverse Terminal
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
reverseTerminal OBJECT IDENTIFIER ::= { opModeParam 9 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.2.9
|
|
|
|
reverseTerminalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ReverseTerminalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reverse terminal mode table."
|
|
::= { reverseTerminal 1 }
|
|
|
|
reverseTerminalEntry OBJECT-TYPE
|
|
SYNTAX ReverseTerminalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reverse terminal mode entry."
|
|
INDEX { portIndex }
|
|
::= { reverseTerminalTable 1 }
|
|
|
|
ReverseTerminalEntry ::=
|
|
SEQUENCE {
|
|
reverseTerminalTcpAliveCheck
|
|
INTEGER,
|
|
reverseTerminalInactivityTime
|
|
INTEGER,
|
|
reverseTerminalTcpPort
|
|
INTEGER,
|
|
reverseTerminalAuthenticationType
|
|
INTEGER,
|
|
reverseTerminalMapKeys
|
|
INTEGER
|
|
}
|
|
|
|
reverseTerminalTcpAliveCheck OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TCP alive check time.
|
|
0 min: TCP connection will not be closed when the
|
|
TCP connection is idle.
|
|
1 to 99 min: The NPort W2x50A series device server
|
|
automatically closes the TCP connection if there is
|
|
no TCP activity for the given time."
|
|
::= { reverseTerminalEntry 1 }
|
|
|
|
reverseTerminalInactivityTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0 min: TCP connection is not closed when the
|
|
serial line is idle.
|
|
0-99 min: The NPort W2x50A series device server
|
|
automatically closes the TCP connection if there is
|
|
no serial data activity for the given time. After
|
|
the connection is closed, the NPort W2x50P series
|
|
device server starts listening for another
|
|
TCP connection."
|
|
::= { reverseTerminalEntry 2 }
|
|
|
|
reverseTerminalTcpPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each of the NPort W2x50A series device server's serial
|
|
ports are mapped to a TCP port."
|
|
::= { reverseTerminalEntry 3 }
|
|
|
|
reverseTerminalAuthenticationType OBJECT-TYPE
|
|
SYNTAX INTEGER { none(0), local(1), radius(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reverse terminal authentication type."
|
|
::= { reverseTerminalEntry 4 }
|
|
|
|
reverseTerminalMapKeys OBJECT-TYPE
|
|
SYNTAX INTEGER { cr-lf(0), cr(1), lf(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If data received through NPort W2x50A series device
|
|
server's Ethernet port is sent using the 'enter'
|
|
command, the data will be transmitted out through
|
|
the serial port with an added
|
|
1. 'carriage return + line feed' if you select the
|
|
'cr-lf' option (i.e., the cursor will jump to the
|
|
next line, and return to the first character of the
|
|
line)
|
|
2. 'carriage return' if you select the 'cr' option
|
|
(i.e., the cursor will return to the first character
|
|
of the line
|
|
3. 'line feed' if you select the 'lf' option. (i.e.,
|
|
the cursor will jump to the next line, but not move
|
|
horizontally)"
|
|
::= { reverseTerminalEntry 5 }
|
|
|
|
-- --------------------------------------------------------------------------------------
|
|
-- Serial port settings -> Operation Modes settings -> Data Packing
|
|
-- --------------------------------------------------------------------------------------
|
|
|
|
dataPacking OBJECT IDENTIFIER ::= { opModeSetting 3 } -- 1.3.6.1.4.1.8691.2.13.1.4.1.3
|
|
|
|
dataPackingPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DataPackingPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Data Packing table."
|
|
::= { dataPacking 1 }
|
|
|
|
dataPackingPortEntry OBJECT-TYPE
|
|
SYNTAX DataPackingPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Data Packing entry."
|
|
INDEX { portIndex }
|
|
::= { dataPackingPortTable 1 }
|
|
|
|
DataPackingPortEntry ::=
|
|
SEQUENCE {
|
|
portPacketLength
|
|
INTEGER,
|
|
portDelimiter1Enable
|
|
INTEGER,
|
|
portDelimiter1
|
|
DisplayString,
|
|
portDelimiter2Enable
|
|
INTEGER,
|
|
portDelimiter2
|
|
DisplayString,
|
|
portDelimiterProcess
|
|
INTEGER,
|
|
portForceTransmit
|
|
INTEGER
|
|
}
|
|
|
|
portPacketLength OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the value is 0, the Delimiter Process will be
|
|
used, regardless of the length of the data
|
|
packet. If the data length (in bytes) matches the
|
|
configured value, the data will be forced out. The
|
|
data length can be configured from 0 to 1024 bytes.
|
|
Set to 0 if you do not need to limit the length."
|
|
::= { dataPackingPortEntry 1 }
|
|
|
|
portDelimiter1Enable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the first delimiter character."
|
|
::= { dataPackingPortEntry 2 }
|
|
|
|
portDelimiter1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..2))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first delimiter character, in hex decimal."
|
|
::= { dataPackingPortEntry 3 }
|
|
|
|
portDelimiter2Enable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable the second delimiter character."
|
|
::= { dataPackingPortEntry 4 }
|
|
|
|
portDelimiter2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..2))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second delimiter character, in hex decimal."
|
|
::= { dataPackingPortEntry 5 }
|
|
|
|
portDelimiterProcess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
doNothing(1),
|
|
delimiterAddOne(2),
|
|
delimiterAddTwo(4),
|
|
stripDelimiter(8)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"'delimiterAddOne' or 'delimiterAddTwo': The data
|
|
will be transmitted when an additional byte (for
|
|
'delimiterAddOne'), or an additional 2 bytes (for
|
|
'delimiterAddTwo') of data is received after
|
|
receiving the Delimiter.
|
|
'stripDelimiter': When the delimiter is received,
|
|
the Delimiter is deleted (i.e., stripped), and the
|
|
remaining data is transmitted.
|
|
'doNothing': The data will be transmitted when the
|
|
delimiter is received."
|
|
::= { dataPackingPortEntry 6 }
|
|
|
|
portForceTransmit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"0: Disable the force transmit timeout.
|
|
1 to 65535: Forces the NPort W2x50A series device
|
|
server's TCP/IP protocol software to try to pack
|
|
serial data received during the specified time into
|
|
the same data frame."
|
|
::= { dataPackingPortEntry 7 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Serial port settings -> Communication Parameters settings
|
|
-- -------------------------------------------------------------
|
|
|
|
comParamSetting OBJECT IDENTIFIER ::= { portSetting 2 } -- 1.3.6.1.4.1.8691.2.13.1.4.2
|
|
|
|
comParamPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ComParamPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Communication Parameters table."
|
|
::= { comParamSetting 1 } -- 1.3.6.1.4.1.8691.2.13.1.4.2.1
|
|
|
|
comParamPortEntry OBJECT-TYPE
|
|
SYNTAX ComParamPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Communication Parameters entry."
|
|
INDEX { portIndex }
|
|
::= { comParamPortTable 1 } -- 1.3.6.1.4.1.8691.2.13.1.4.2.1.1
|
|
|
|
ComParamPortEntry ::=
|
|
SEQUENCE {
|
|
portAlias
|
|
DisplayString,
|
|
portInterface
|
|
INTEGER,
|
|
portBaudRate
|
|
INTEGER,
|
|
portDataBits
|
|
INTEGER,
|
|
portStopBits
|
|
INTEGER,
|
|
portParity
|
|
INTEGER,
|
|
portFlowControl
|
|
INTEGER,
|
|
portFIFO
|
|
INTEGER
|
|
}
|
|
|
|
portAlias OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..16))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port alias is included to allow easy identification of
|
|
the serial devices that are connected to NPort W2x50A
|
|
series device server's serial port."
|
|
::= { comParamPortEntry 1 }
|
|
|
|
portInterface OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rs-232(0),
|
|
rs-422(1),
|
|
rs-485-2wire(2),
|
|
rs-485-4wire(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The serial interface that the port works on."
|
|
::= { comParamPortEntry 2 }
|
|
|
|
portBaudRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b50(0),
|
|
b75(1),
|
|
b110(2),
|
|
b134(3),
|
|
b150(4),
|
|
b300(5),
|
|
b600(6),
|
|
b1200(7),
|
|
b1800(8),
|
|
b2400(9),
|
|
b4800(10),
|
|
b9600(12),
|
|
b19200(13),
|
|
b38400(14),
|
|
b57600(15),
|
|
b115200(16),
|
|
b230400(17),
|
|
b460800(18),
|
|
b921600(19)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port's speed in bits per second. You can choose
|
|
a standard baud rate by indexing."
|
|
::= { comParamPortEntry 3 }
|
|
|
|
portDataBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bits-5(0),
|
|
bits-6(1),
|
|
bits-7(2),
|
|
bits-8(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bits in a character for the port."
|
|
::= { comParamPortEntry 4 }
|
|
|
|
portStopBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bits-1(0),
|
|
bits-1dot5(1),
|
|
bits-2(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of stop bits for the port."
|
|
::= { comParamPortEntry 5 }
|
|
|
|
portParity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
odd(1),
|
|
even(3),
|
|
mark(5),
|
|
space(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parity bit for the port."
|
|
::= { comParamPortEntry 6 }
|
|
|
|
portFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
rts-cts(1),
|
|
xon-xoff(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flow-control method for the port."
|
|
::= { comParamPortEntry 7 }
|
|
|
|
portFIFO OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the port's FIFO."
|
|
::= { comParamPortEntry 8 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Serial port settings -> Data Buffering/Log
|
|
-- -------------------------------------------------------------
|
|
|
|
dataBuffering OBJECT IDENTIFIER ::= { portSetting 3 } -- 1.3.6.1.4.1.8691.2.13.1.4.3
|
|
|
|
dataBufferingPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DataBufferingPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Data Buffering table."
|
|
::= { dataBuffering 1 }
|
|
|
|
dataBufferingPortEntry OBJECT-TYPE
|
|
SYNTAX DataBufferingPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Data Buffering entry."
|
|
INDEX { portIndex }
|
|
::= { dataBufferingPortTable 1 }
|
|
|
|
DataBufferingPortEntry ::=
|
|
SEQUENCE {
|
|
portBufferingEnable
|
|
INTEGER,
|
|
portSerialDataLoggingEnable
|
|
INTEGER
|
|
}
|
|
|
|
portBufferingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable off-line port buffering."
|
|
::= { dataBufferingPortEntry 1 }
|
|
|
|
portSerialDataLoggingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable serial data logging for the port."
|
|
::= { dataBufferingPortEntry 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Management
|
|
-- -------------------------------------------------------------
|
|
|
|
sysManagement OBJECT IDENTIFIER ::= { swMgmt 5 } -- 1.3.6.1.4.1.8691.2.13.1.5
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Management -> Misc. Network Settings
|
|
-- -------------------------------------------------------------
|
|
|
|
miscNetworkSettings OBJECT IDENTIFIER ::= { sysManagement 1 } -- 1.3.6.1.4.1.8691.2.13.1.5.1
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- System Management -> Misc. Network Settings -> Accessible IP List
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
accessibleIp OBJECT IDENTIFIER ::= { miscNetworkSettings 1 } -- 1.3.6.1.4.1.8691.2.13.1.5.1.1
|
|
|
|
enableAccessibleIpList OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the entire accessible IP list."
|
|
::= { accessibleIp 1 }
|
|
|
|
accessibleIpListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AccessibleIpListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP List table."
|
|
::= { accessibleIp 2 } -- 1.3.6.1.4.1.8691.2.13.1.5.1.1.2
|
|
|
|
accessibleIpListEntry OBJECT-TYPE
|
|
SYNTAX AccessibleIpListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP List entry."
|
|
INDEX { accessibleIpListIndex }
|
|
::= { accessibleIpListTable 1 } -- 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1
|
|
|
|
AccessibleIpListEntry ::=
|
|
SEQUENCE {
|
|
accessibleIpListIndex
|
|
INTEGER,
|
|
activeAccessibleIpList
|
|
INTEGER,
|
|
accessibleIpListAddress
|
|
IpAddress,
|
|
accessibleIpListNetmask
|
|
IpAddress
|
|
}
|
|
|
|
accessibleIpListIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP List index."
|
|
::= { accessibleIpListEntry 1 }
|
|
|
|
activeAccessibleIpList OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable this accessible IP entry."
|
|
::= { accessibleIpListEntry 2 }
|
|
|
|
accessibleIpListAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP address. This value can be the IP address of a
|
|
single host if the netmask is set to '255.255.255.255,'
|
|
or it can be a network address."
|
|
::= { accessibleIpListEntry 3 }
|
|
|
|
accessibleIpListNetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Accessible IP address netmask. The IP address and
|
|
netmask are used to specify a group of remote hosts."
|
|
::= { accessibleIpListEntry 4 }
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- System Management -> Misc. Network Settings -> SNMP Agent Settings
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
snmpAgentSettings OBJECT IDENTIFIER ::= { miscNetworkSettings 2 } -- 1.3.6.1.4.1.8691.2.13.1.5.1.2
|
|
|
|
snmpEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable SNMP agent."
|
|
::= { snmpAgentSettings 1 }
|
|
|
|
snmpContactName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMP contact information usually includes an
|
|
emergency contact name and telephone or pager
|
|
number."
|
|
::= { snmpAgentSettings 2 }
|
|
|
|
snmpLocation OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the location string for SNMP agents, such as
|
|
the NPort W2x50A series device server. This string is
|
|
usually set to the street address where the NPort
|
|
W2x50A series device server is physically located."
|
|
::= { snmpAgentSettings 3 }
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- System Management -> Misc. Network Settings -> Authentication Server
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
authenticationServer OBJECT IDENTIFIER ::= { miscNetworkSettings 4 }
|
|
|
|
radiusServerIp OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address or domain name of the RADIUS server."
|
|
::= { authenticationServer 1 }
|
|
|
|
udpPortAuthenticationServer OBJECT-TYPE
|
|
SYNTAX INTEGER { port1645(1645), port1812(1812)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UDP port of the RADIUS server."
|
|
::= { authenticationServer 3 }
|
|
|
|
radiusAccounting OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable RADIUS accounting."
|
|
::= { authenticationServer 4 }
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- System Management -> Misc. Network Settings -> System Log Settings
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
sysLogSettings OBJECT IDENTIFIER ::= { miscNetworkSettings 5 } -- 1.3.6.1.4.1.8691.2.13.1.5.1.3
|
|
|
|
sysLocalLog OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System cold start, System warm start."
|
|
::= { sysLogSettings 1 }
|
|
|
|
networkLocalLog OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DHCP/BOOTP get IP/renew, mail fail, NTP connect fail,
|
|
IP conflict, network link down."
|
|
::= { sysLogSettings 2 }
|
|
|
|
configLocalLog OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Login fail, IP changed, password changed, firmware upgrade,
|
|
SSL certificate import, config export, wireless certificate import,
|
|
serial data log export."
|
|
::= { sysLogSettings 3 }
|
|
|
|
opModeLocalLog OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Connect, Disconnect, Restart."
|
|
::= { sysLogSettings 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Management -> Auto Warning Settings
|
|
-- -------------------------------------------------------------
|
|
|
|
autoWarningSettings OBJECT IDENTIFIER ::= { sysManagement 2 } -- 1.3.6.1.4.1.8691.2.13.1.5.2
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Management -> Auto Warning Settings -> Event Settings
|
|
-- -------------------------------------------------------------
|
|
|
|
eventSettings OBJECT IDENTIFIER ::= { autoWarningSettings 1 } -- 1.3.6.1.4.1.8691.2.13.1.5.2.1
|
|
|
|
mailWarningColdStart OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Refers to starting the system from power off
|
|
(contrast this with warm start). When performing a
|
|
cold start, the NPort W2x50A series device server
|
|
will automatically issue an auto warning message by
|
|
e-mail after booting up."
|
|
::= { eventSettings 1 }
|
|
|
|
mailWarningWarmStart OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Refers to restarting the NPort W2x50A without
|
|
turning the power off. When performing a warm start,
|
|
the NPort W2x50A series device server will
|
|
automatically send an e-mail after rebooting."
|
|
::= { eventSettings 2 }
|
|
|
|
mailWarningAuthFailure OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user inputs a wrong password from the Console
|
|
or Administrator. When authentication failure
|
|
occurs, the NPort W2x50A series device server
|
|
will immediately send an e-mail."
|
|
::= { eventSettings 3 }
|
|
|
|
mailWarningIpChanged OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user has changed the NPort W2x50A series
|
|
device server's IP address. When the IP address
|
|
changes,the NPort W2x50A series device server
|
|
will send an e-mail with the new IP address before
|
|
it reboots. If the NPort W2x50A series device
|
|
server is unable to send an e-mail message to the
|
|
mail server within 15 seconds, it will reboot anyway,
|
|
and abort the e-mail auto warning."
|
|
::= { eventSettings 4 }
|
|
|
|
mailWarningPasswordChanged OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user has changed the NPort W2x50A series device
|
|
server's password. When the password changes, the
|
|
NPort W2x50A series device server will send an e-mail
|
|
with the password changed notice before it reboots.
|
|
If the NPort W2x50A series device server is unable to
|
|
send an e-mail message to the mail server within 15
|
|
seconds, it will reboot anyway, and abort the e-mail
|
|
auto warning."
|
|
::= { eventSettings 5 }
|
|
|
|
trapServerColdStart OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Refers to starting the system from power off
|
|
(contrast this with warm start). When performing a
|
|
cold start, the NPort W2x50A series device server
|
|
will automatically issue an auto warning message by
|
|
sending an SNMP trap after booting up."
|
|
::= { eventSettings 6 }
|
|
|
|
trapServerWarmStart OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Refers to restarting the NPort W2x50A without
|
|
turning the power off. When performing a warm start,
|
|
the NPort W2x50A series device server will
|
|
automatically send an SNMP trap after rebooting."
|
|
::= { eventSettings 7 }
|
|
|
|
trapServerAuthFailure OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user inputs a wrong password from the Console
|
|
or Administrator. When authentication failure
|
|
occurs, the NPort W2x50A series device server will
|
|
immediately send an SNMP trap."
|
|
::= { eventSettings 8 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Management -> Auto Warning Settings -> Serial Event Settings
|
|
-- -------------------------------------------------------------
|
|
|
|
serialEventSettings OBJECT IDENTIFIER ::= { autoWarningSettings 2 } -- 1.3.6.1.4.1.8691.2.13.1.5.2.2
|
|
|
|
portEventSettingsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortEventSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Event Settings Table."
|
|
::= { serialEventSettings 1 } -- 1.3.6.1.4.1.8691.2.13.1.5.2.2.1
|
|
|
|
portEventSettingsEntry OBJECT-TYPE
|
|
SYNTAX PortEventSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port Event Settings entry."
|
|
INDEX { portIndex }
|
|
::= { portEventSettingsTable 1 } -- 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1
|
|
|
|
PortEventSettingsEntry ::=
|
|
SEQUENCE {
|
|
mailDCDchange
|
|
INTEGER,
|
|
trapDCDchange
|
|
INTEGER,
|
|
mailDSRchange
|
|
INTEGER,
|
|
trapDSRchange
|
|
INTEGER
|
|
}
|
|
|
|
mailDCDchange OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A change in the DCD (Data Carrier Detect) signal
|
|
indicates that the modem connection status has
|
|
changed. For example, if the DCD signal changes to
|
|
low, it indicates that the connection line is down.
|
|
When the DCD signal changes to low, the NPort
|
|
W2x50A series device server will immediately send
|
|
an e-mail message."
|
|
::= { portEventSettingsEntry 1 }
|
|
|
|
trapDCDchange OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A change in the DCD (Data Carrier Detect) signal
|
|
indicates that the modem connection status has
|
|
changed. For example, if the DCD signal changes to
|
|
low, it indicates that the connection line is down.
|
|
When the DCD signal changes to low, the NPort
|
|
W2x50A series device server will immediately send
|
|
an SNMP trap."
|
|
::= { portEventSettingsEntry 2 }
|
|
|
|
mailDSRchange OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A change in the DSR (Data Set Ready) signal
|
|
indicates that the data communication equipment is
|
|
powered off. For example, if the DSR signal changes
|
|
to low, it indicates that the data communication
|
|
equipment is powered down. When the DSR signal
|
|
changes to low, the NPort W2x50A series device
|
|
server will immediately send an e-mail message."
|
|
::= { portEventSettingsEntry 3 }
|
|
|
|
trapDSRchange OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A change in the DSR (Data Set Ready) signal
|
|
indicates that the data communication equipment is
|
|
powered off. For example, if the DSR signal changes
|
|
to low, it indicates that the data communication
|
|
equipment is powered down. When the DSR signal
|
|
changes to low, the NPort W2x50A series device
|
|
server will immediately send an SNMP trap."
|
|
::= { portEventSettingsEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Management -> Auto Warning Settings -> E-mail Alert
|
|
-- -------------------------------------------------------------
|
|
|
|
emailAlert OBJECT IDENTIFIER ::= { autoWarningSettings 3 } -- 1.3.6.1.4.1.8691.2.13.1.5.2.3
|
|
|
|
emailWarningMailServer OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The e-mail server's IP address or domain name of
|
|
the e-mail warning function."
|
|
::= { emailAlert 1 }
|
|
|
|
emailRequiresAuthentication OBJECT-TYPE
|
|
SYNTAX INTEGER { non-require(0), require(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set if the mail server requires user login."
|
|
::= { emailAlert 2 }
|
|
|
|
emailWarningUserName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user name used to log into the mail server if
|
|
authentication is required."
|
|
::= { emailAlert 3 }
|
|
|
|
emailWarningFromEmail OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The e-mail address to be filled in the 'From' field of
|
|
the auto-warning e-mail."
|
|
::= { emailAlert 5 }
|
|
|
|
emailWarningFirstEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first email address to where the auto-warning
|
|
e-mail is to be sent."
|
|
::= { emailAlert 6 }
|
|
|
|
emailWarningSecondEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second email address to where the auto-warning
|
|
e-mail is to be sent."
|
|
::= { emailAlert 7 }
|
|
|
|
emailWarningThirdEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The third email address to where the auto-warning
|
|
e-mail is to be sent."
|
|
::= { emailAlert 8 }
|
|
|
|
emailWarningFourthEmailAddr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fourth email address to where the auto-warning
|
|
e-mail is to be sent."
|
|
::= { emailAlert 9 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Management -> Auto Warning Settings -> SNMP Trap
|
|
-- -------------------------------------------------------------
|
|
|
|
snmpTrap OBJECT IDENTIFIER ::= { autoWarningSettings 4 } -- 1.3.6.1.4.1.8691.2.13.1.5.2.4
|
|
|
|
snmpTrapReceiverIp OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMP trap server IP address or domain name."
|
|
::= { snmpTrap 1 }
|
|
|
|
trapVersion OBJECT-TYPE
|
|
SYNTAX INTEGER { v1(0), v2c(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMP trap version used for the auto-warning function."
|
|
::= { snmpTrap 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Management -> Maintenance
|
|
-- -------------------------------------------------------------
|
|
|
|
maintenance OBJECT IDENTIFIER ::= { sysManagement 3 } -- 1.3.6.1.4.1.8691.2.13.1.5.3
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- System Management -> Maintenance -> Console Settings
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
consoleSettings OBJECT IDENTIFIER ::= { maintenance 1 } -- 1.3.6.1.4.1.8691.2.13.1.5.3.1
|
|
|
|
httpConsole OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable HTTP console."
|
|
::= { consoleSettings 1 }
|
|
|
|
httpsConsole OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable HTTPS console."
|
|
::= { consoleSettings 2 }
|
|
|
|
telnetConsole OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable Telnet console."
|
|
::= { consoleSettings 3 }
|
|
|
|
sshConsole OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable SSH console."
|
|
::= { consoleSettings 4 }
|
|
|
|
serialConsole OBJECT-TYPE
|
|
SYNTAX INTEGER { disable(0), enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable Serial console."
|
|
::= { consoleSettings 5 }
|
|
|
|
resetButton OBJECT-TYPE
|
|
SYNTAX INTEGER { Disable_after_60_sec(0), Always_enable(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset button setting."
|
|
::= { consoleSettings 6 }
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- System Management -> Maintenance -> Load Factory Default
|
|
-- ----------------------------------------------------------------------------
|
|
|
|
loadFactoryDefault OBJECT IDENTIFIER ::= { maintenance 2 } -- 1.3.6.1.4.1.8691.2.13.1.5.3.2
|
|
|
|
loadFactoryDefaultSetting OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
resetToFactoryDefault-ExcludingIpConfiguration (0),
|
|
resetToFactoryDefault (1)
|
|
}
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This function will reset all of the NPort W2x50A
|
|
series device server's settings to the factory default
|
|
values. Be aware that previous settings will be
|
|
lost. Selecting Reset to factory default
|
|
(excluding IP configuration) will reset all settings
|
|
except the IP configuration to factory defaults.
|
|
Selecting Reset to factory default will reset all
|
|
settings including the IP configuration to factory
|
|
defaults."
|
|
::= { loadFactoryDefault 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Status
|
|
-- -------------------------------------------------------------
|
|
|
|
sysStatus OBJECT IDENTIFIER ::= { swMgmt 6 } -- 1.3.6.1.4.1.8691.2.13.1.6
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Status -> Serial to Network Connections
|
|
-- -------------------------------------------------------------
|
|
|
|
s2eConnections OBJECT IDENTIFIER ::= { sysStatus 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.1
|
|
|
|
monitorRemoteIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MonitorRemoteIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial to Network Connections Remote IP table."
|
|
::= { s2eConnections 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.1.1
|
|
|
|
monitorRemoteIpEntry OBJECT-TYPE
|
|
SYNTAX MonitorRemoteIpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial to Network Connections Remote IP entry."
|
|
INDEX { portIndex, remoteIpIndex }
|
|
::= { monitorRemoteIpTable 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.1.1.1
|
|
|
|
MonitorRemoteIpEntry ::=
|
|
SEQUENCE {
|
|
remoteIpIndex
|
|
INTEGER,
|
|
monitorRemoteIp
|
|
IpAddress
|
|
}
|
|
|
|
remoteIpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial to Network Connections Remote IP index."
|
|
::= { monitorRemoteIpEntry 1 }
|
|
|
|
monitorRemoteIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote IP currently connecting to this port."
|
|
::= { monitorRemoteIpEntry 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Status -> Serial Port Status
|
|
-- -------------------------------------------------------------
|
|
|
|
serialPortStatus OBJECT IDENTIFIER ::= { sysStatus 2 } -- 1.3.6.1.4.1.8691.2.13.1.6.2
|
|
|
|
monitorSerialPortStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MonitorSerialPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial Port Status table."
|
|
::= { serialPortStatus 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.2.1
|
|
|
|
monitorSerialPortStatusEntry OBJECT-TYPE
|
|
SYNTAX MonitorSerialPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial Port Status entry."
|
|
INDEX { portIndex }
|
|
::= { monitorSerialPortStatusTable 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.2.1.1
|
|
|
|
MonitorSerialPortStatusEntry ::=
|
|
SEQUENCE {
|
|
monitorTxCount
|
|
INTEGER,
|
|
monitorRxCount
|
|
INTEGER,
|
|
monitorTxTotalCount
|
|
INTEGER,
|
|
monitorRxTotalCount
|
|
INTEGER,
|
|
monitorDSR
|
|
INTEGER,
|
|
monitorDTR
|
|
INTEGER,
|
|
monitorRTS
|
|
INTEGER,
|
|
monitorCTS
|
|
INTEGER,
|
|
monitorDCD
|
|
INTEGER
|
|
}
|
|
|
|
monitorTxCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the number of bytes transmitted from the port
|
|
since the last time the port was initialized."
|
|
::= { monitorSerialPortStatusEntry 1 }
|
|
|
|
monitorRxCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the number of bytes received by the port since
|
|
the last time the port was initialized."
|
|
::= { monitorSerialPortStatusEntry 2 }
|
|
|
|
monitorTxTotalCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the number of bytes transmitted from the port
|
|
since the last time the system was initialized."
|
|
::= { monitorSerialPortStatusEntry 3 }
|
|
|
|
monitorRxTotalCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the number of bytes received by the port since
|
|
the last time the system was initialized."
|
|
::= { monitorSerialPortStatusEntry 4 }
|
|
|
|
monitorDSR OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the current DSR status of this port."
|
|
::= { monitorSerialPortStatusEntry 5 }
|
|
|
|
monitorDTR OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the current DTR status of this port."
|
|
::= { monitorSerialPortStatusEntry 6 }
|
|
|
|
monitorRTS OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the current RTS status of this port."
|
|
::= { monitorSerialPortStatusEntry 7 }
|
|
|
|
monitorCTS OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the current CTS status of this port."
|
|
::= { monitorSerialPortStatusEntry 8 }
|
|
|
|
monitorDCD OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the current DCD status of this port."
|
|
::= { monitorSerialPortStatusEntry 9 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Status -> Serial Port Error Count
|
|
-- -------------------------------------------------------------
|
|
|
|
serialPortErrorCount OBJECT IDENTIFIER ::= { sysStatus 3 } -- 1.3.6.1.4.1.8691.2.13.1.6.3
|
|
|
|
monitorSerialPortErrorCountTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MonitorSerialPortErrorCountEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial Port Error Count table."
|
|
::= { serialPortErrorCount 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.3.1
|
|
|
|
monitorSerialPortErrorCountEntry OBJECT-TYPE
|
|
SYNTAX MonitorSerialPortErrorCountEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial Port Error Count entry."
|
|
INDEX { portIndex }
|
|
::= { monitorSerialPortErrorCountTable 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.3.1.1
|
|
|
|
MonitorSerialPortErrorCountEntry ::=
|
|
SEQUENCE {
|
|
monitorErrorCountFrame
|
|
INTEGER,
|
|
monitorErrorCountParity
|
|
INTEGER,
|
|
monitorErrorCountOverrun
|
|
INTEGER,
|
|
monitorErrorCountBreak
|
|
INTEGER
|
|
}
|
|
|
|
monitorErrorCountFrame OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the number of 'Frame' errors for this port."
|
|
::= { monitorSerialPortErrorCountEntry 1 }
|
|
|
|
monitorErrorCountParity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the number of 'Parity' errors for this port."
|
|
::= { monitorSerialPortErrorCountEntry 2 }
|
|
|
|
monitorErrorCountOverrun OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the number of 'Overrun' errors for this port."
|
|
::= { monitorSerialPortErrorCountEntry 3 }
|
|
|
|
monitorErrorCountBreak OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the number of 'Break' errors for this port."
|
|
::= { monitorSerialPortErrorCountEntry 4 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Status -> Serial Port Settings
|
|
-- -------------------------------------------------------------
|
|
|
|
serialPortSettings OBJECT IDENTIFIER ::= { sysStatus 4 } -- 1.3.6.1.4.1.8691.2.13.1.6.4
|
|
|
|
monitorSerialPortSettingsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MonitorSerialPortSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial Port Settings table."
|
|
::= { serialPortSettings 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.4.1
|
|
|
|
monitorSerialPortSettingsEntry OBJECT-TYPE
|
|
SYNTAX MonitorSerialPortSettingsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial Port Settings entry."
|
|
INDEX { portIndex }
|
|
::= { monitorSerialPortSettingsTable 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.4.1.1
|
|
|
|
MonitorSerialPortSettingsEntry ::=
|
|
SEQUENCE {
|
|
monitorBaudRate
|
|
INTEGER,
|
|
monitorDataBits
|
|
INTEGER,
|
|
monitorStopBits
|
|
DisplayString,
|
|
monitorParity
|
|
INTEGER,
|
|
monitorRTSCTSFlowControl
|
|
INTEGER,
|
|
monitorXONXOFFFlowControl
|
|
INTEGER,
|
|
monitorFIFO
|
|
INTEGER,
|
|
monitorInterface
|
|
INTEGER
|
|
}
|
|
|
|
monitorBaudRate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the current baudrate of the port."
|
|
::= { monitorSerialPortSettingsEntry 1 }
|
|
|
|
monitorDataBits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bits-5(5),
|
|
bits-6(6),
|
|
bits-7(7),
|
|
bits-8(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the number of bits per byte for the port."
|
|
::= { monitorSerialPortSettingsEntry 2 }
|
|
|
|
monitorStopBits OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the number of stop bits for the port."
|
|
::= { monitorSerialPortSettingsEntry 3 }
|
|
|
|
monitorParity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
odd(8),
|
|
even(24),
|
|
mark(40),
|
|
space(56)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the parity bit for the port."
|
|
::= { monitorSerialPortSettingsEntry 4 }
|
|
|
|
monitorRTSCTSFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View if the port is using RTS/CTS flow control."
|
|
::= { monitorSerialPortSettingsEntry 5 }
|
|
|
|
monitorXONXOFFFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER { off(0), on(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View if the port is using XON/XOFF flow control."
|
|
::= { monitorSerialPortSettingsEntry 6 }
|
|
|
|
monitorFIFO OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(0),
|
|
enable(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View FIFO status of this port."
|
|
::= { monitorSerialPortSettingsEntry 7 }
|
|
|
|
monitorInterface OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rs-232(0),
|
|
rs-422(1),
|
|
rs-485-2-wire(2),
|
|
rs-485-4-wire(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View the serial interface that the port is using."
|
|
::= { monitorSerialPortSettingsEntry 8 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Status -> Buffering
|
|
-- -------------------------------------------------------------
|
|
|
|
serialPortBuffering OBJECT IDENTIFIER ::= { sysStatus 5 } -- 1.3.6.1.4.1.8691.2.13.1.6.5
|
|
|
|
monitorSerialPortBufferingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MonitorSerialPortBufferingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial Port Buffering table."
|
|
::= { serialPortBuffering 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.5.1
|
|
|
|
monitorSerialPortBufferingEntry OBJECT-TYPE
|
|
SYNTAX MonitorSerialPortBufferingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Serial Port Settings entry."
|
|
INDEX { portIndex }
|
|
::= { monitorSerialPortBufferingTable 1 } -- 1.3.6.1.4.1.8691.2.13.1.6.5.1.1
|
|
|
|
MonitorSerialPortBufferingEntry ::=
|
|
SEQUENCE {
|
|
monitorBuffering
|
|
INTEGER
|
|
}
|
|
|
|
monitorBuffering OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"View length of buffered data for the port. The length unit is byte."
|
|
::= { monitorSerialPortBufferingEntry 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- System Status -> WLAN Status
|
|
-- -------------------------------------------------------------
|
|
|
|
sysWlanStatus OBJECT IDENTIFIER ::= { sysStatus 6 } -- 1.3.6.1.4.1.8691.2.13.1.6.6
|
|
|
|
wlanStatusActiveProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The active profile name."
|
|
::= { sysWlanStatus 1 }
|
|
|
|
wlanStatusIpConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER { static(0), dhcp(1), bootp(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP configuration mode of the NPort. You can
|
|
choose from four possible IP configuration modes:
|
|
Static, DHCP, DHCP/BOOTP, BOOTP."
|
|
::= { sysWlanStatus 2 }
|
|
|
|
wlanStatusIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An IP address is a number assigned to a network
|
|
device (such as a computer) as a permanent address
|
|
on the network. Computers use the IP address to
|
|
identify and talk to each other over the network.
|
|
Choose a proper IP address that is unique and valid
|
|
in your network environment."
|
|
::= { sysWlanStatus 3 }
|
|
|
|
wlanStatusNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A subnet mask represents all of the network hosts
|
|
at one geographic location, in one building, or on
|
|
the same local area network. When a packet is sent
|
|
out over the network, the NPort W2x50A series
|
|
device server will use the subnet mask to check
|
|
whether the TCP/IP host specified in the packet is on
|
|
the local network segment. If the address is on the
|
|
same network segment as the NPort W2x50A series
|
|
device server, a connection is established directly
|
|
from the NPort W2x50A series device server.
|
|
Otherwise, the connection is established through the
|
|
given default gateway."
|
|
::= { sysWlanStatus 4 }
|
|
|
|
wlanStatusDefaultGateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A gateway is a network computer that acts as an
|
|
entrance to another network. Usually, the computers
|
|
that control traffic within the network or at the
|
|
local Internet service provider are gateway nodes.
|
|
The NPort W2x50A series device server needs to
|
|
know the IP address of the default gateway computer
|
|
in order to communicate with the hosts outside the
|
|
local network environment. For correct gateway IP
|
|
address information, consult with the network
|
|
administrator."
|
|
::= { sysWlanStatus 5 }
|
|
|
|
wlanStatusNetworkType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Type of Wireless LAN. The possible values are
|
|
'Infrastrcture Mode' and 'Ad-hoc Mode'"
|
|
::= { sysWlanStatus 6 }
|
|
|
|
wlanStatusRFType OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RF type of Wireless LAN. The possible values are
|
|
'N/A', 'Auto', '802.11a', '802.11b', '802.11g'"
|
|
::= { sysWlanStatus 7 }
|
|
|
|
wlanStatusSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SSID of WLAN."
|
|
::= { sysWlanStatus 8 }
|
|
|
|
wlanStatusChannel OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The currently used channel."
|
|
::= { sysWlanStatus 9 }
|
|
|
|
wlanStatusAuthentication OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Authentication type of Wireless LAN. The possible values are
|
|
'Unknown', 'Open System', 'Shared Key', 'WPA', 'WPA-PSK', 'WPA2', 'WPA2-PSK'"
|
|
::= { sysWlanStatus 10 }
|
|
|
|
wlanStatusEncryption OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show encryption type of Wireless LAN."
|
|
::= { sysWlanStatus 11 }
|
|
|
|
wlanStatusRegion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display region. The possible values are 'US', 'EU', 'JP'"
|
|
::= { sysWlanStatus 12 }
|
|
|
|
wlanStatusSignalStrength OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The signal strength of Wireless LAN."
|
|
::= { sysWlanStatus 13 }
|
|
|
|
wlanStatusConnectionSpeed OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The connection speed of Wireless LAN."
|
|
::= { sysWlanStatus 14 }
|
|
|
|
wlanStatusCurrentBSSID OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current BSSID of Wireless LAN."
|
|
::= { sysWlanStatus 15 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Activate Settings
|
|
-- -------------------------------------------------------------
|
|
|
|
activateSettings OBJECT IDENTIFIER ::= { swMgmt 7 } -- 1.3.6.1.4.1.8691.2.13.1.7
|
|
|
|
doActivate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
activate(1)
|
|
}
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Activate current settings."
|
|
::= { activateSettings 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Restart
|
|
-- -------------------------------------------------------------
|
|
|
|
restart OBJECT IDENTIFIER ::= { swMgmt 8 } -- 1.3.6.1.4.1.8691.2.13.1.8
|
|
|
|
restartPorts OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
port1(0), port2(1)
|
|
}
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Restart serial port. Restarting will cause port
|
|
reseting."
|
|
::= { restart 1 }
|
|
|
|
restartSystem OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
restart(1)
|
|
}
|
|
MAX-ACCESS write-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Restart the NPort W2x50A series device server.
|
|
Be sure to save all of your configuration changes
|
|
before you restart the system. Otherwise, all of
|
|
the changes will be lost."
|
|
::= { restart 2 }
|
|
|
|
END
|
|
|
|
|