Observium_CE/mibs/infinera/LUM-MUX-MIB

2196 lines
55 KiB
Plaintext

LUM-MUX-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Gauge32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
DisplayString, TEXTUAL-CONVENTION, DateAndTime
FROM SNMPv2-TC
lumModules, lumMuxMIB
FROM LUM-REG
FaultStatus, MgmtNameString, SubrackNumber, SlotNumber, PortNumber,
LambdaFrequency, BoardOrInterfaceAdminStatus, BoardOrInterfaceOperStatus,
ObjectProperty
FROM LUM-TC;
lumMuxMIBModule MODULE-IDENTITY
LAST-UPDATED
"201706150000Z" -- June 15th 2017
ORGANIZATION
"Infinera Corporation"
CONTACT-INFO
"techsupport@infinera.com"
DESCRIPTION
"The muxponder trunk interfaces.
Muxponder client interfaces are
found in the multi-rate client interface MIB.
- General
- MUX trunk interfaces
"
REVISION
"201706150000Z" -- June 15th 2017
DESCRIPTION
"Changes made for release r29.0:
- Changed ORGANIZATION and CONTACT-INFO"
REVISION
"201601110000Z" -- Jan 11th 2016
DESCRIPTION
"Added default value notPresent for operStatus."
REVISION
"201104120000Z" -- April 12th 2011
DESCRIPTION
"Added new compliance group to mark adding write support for trail trace."
REVISION
"200711120000Z" -- November 12th 2007
DESCRIPTION
"Fixed indexing of muxVc4Entry and minor compliance error."
REVISION
"200301290000Z" -- January 29th 2003
DESCRIPTION
"Changed the handling of VC4s again: added connectionMode/Status"
REVISION
"200212040000Z" -- December 4th 2002
DESCRIPTION
"Added trace identifier attributes in the mux interface table."
REVISION
"200210290000Z" -- October 29th 2002
DESCRIPTION
"Added txLambda/expectedTxLambda."
REVISION
"200210010000Z" -- October 1st 2002
DESCRIPTION
"Updated the VC-4 table."
REVISION
"200204030000Z" -- April 3rd 2002
DESCRIPTION
"Added laser status."
REVISION
"200201170000Z" -- January 17th 2002
DESCRIPTION
"Added lossOfFrame and alarmIndicationSignal alarms."
REVISION
"200112030000Z" -- December 3rd 2001
DESCRIPTION
"Moved admin and operStatus definitions to LUM-TC"
REVISION
"200111090000Z" -- November 9th 2001
DESCRIPTION
"Added bitrate mismatch alarm.
Added laserBias meter and threshold, not supported yet but still."
REVISION
"200110300000Z" -- October 30th 2001
DESCRIPTION
"The initial revision of this module."
::= { lumModules 14 }
-- ----------------------------------------------------
-- Conformance area, containing groups and complicance
-- specifications.
-- ----------------------------------------------------
lumMuxConfs OBJECT IDENTIFIER ::= { lumMuxMIB 1 }
lumMuxGroups OBJECT IDENTIFIER ::= { lumMuxConfs 1 }
lumMuxCompl OBJECT IDENTIFIER ::= { lumMuxConfs 2 }
-- ----------------------------------------------------
-- Root for objects in the mux MIB
-- ----------------------------------------------------
lumMuxMIBObjects OBJECT IDENTIFIER ::= { lumMuxMIB 2 }
-- ----------------------------------------------------
-- This MIB contains the following groups:
-- ----------------------------------------------------
muxGeneral OBJECT IDENTIFIER ::= { lumMuxMIBObjects 1 }
muxIfList OBJECT IDENTIFIER ::= { lumMuxMIBObjects 2 }
muxVc4List OBJECT IDENTIFIER ::= { lumMuxMIBObjects 3 }
-- ----------------------------------------------------
-- Textual Conventions
-- ----------------------------------------------------
MuxTxDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The direction of the transmitted signal.
undefined - Unknown/Dont care
toWest - The transmitted signal is sent to west
toEast - The transmitted signal is sent to east"
SYNTAX INTEGER {
undefined (0),
toWest (1),
toEast (2) }
-- ----------------------------------------------------
-- General group
-- ----------------------------------------------------
muxGeneralLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the configuration of the MIB was
last changed.
"
::= { muxGeneral 1 }
muxGeneralStateLastChangeTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the state of the MIB was last
changed.
"
::= { muxGeneral 2 }
muxGeneralMuxIfTableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of table
"
::= { muxGeneral 3 }
muxGeneralMuxVc4TableSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of table
"
::= { muxGeneral 4 }
-- ----------------------------------------------------
-- MUX trunk interfaces
-- ----------------------------------------------------
muxIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MuxIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface list."
::= { muxIfList 1 }
muxIfEntry OBJECT-TYPE
SYNTAX MuxIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the interface list.
"
INDEX { muxIfIndex }
::= { muxIfTable 1 }
MuxIfEntry ::=
SEQUENCE {
muxIfIndex Unsigned32,
muxIfName MgmtNameString,
muxIfDescr DisplayString,
muxIfSubrack SubrackNumber,
muxIfSlot SlotNumber,
muxIfTxPort PortNumber,
muxIfRxPort PortNumber,
muxIfInvPhysIndexOrZero Unsigned32,
muxIfPowerLevel Integer32,
muxIfPowerLevelHighThreshold Integer32,
muxIfPowerLevelLowThreshold Integer32,
muxIfAdminStatus BoardOrInterfaceAdminStatus,
muxIfOperStatus BoardOrInterfaceOperStatus,
muxIfLossOfSignal FaultStatus,
muxIfReceivedPowerHigh FaultStatus,
muxIfReceivedPowerLow FaultStatus,
muxIfBitrateMismatch FaultStatus,
muxIfLaserBias Unsigned32,
muxIfLaserBiasThreshold Unsigned32,
muxIfJ0PathTrace OCTET STRING,
muxIfAlarmIndicationSignal FaultStatus,
muxIfLossOfFrame FaultStatus,
muxIfLaserStatus INTEGER,
muxIfTxDirection MuxTxDirection,
muxIfExpectedTxLambda LambdaFrequency,
muxIfTxLambda LambdaFrequency,
muxIfTraceIntrusionMode INTEGER,
muxIfTraceTransmitted DisplayString,
muxIfTraceReceived DisplayString,
muxIfTraceExpected DisplayString,
muxIfTraceAlarmMode INTEGER,
muxIfTraceMismatch FaultStatus,
muxIfOHTransparency INTEGER,
muxIfSuppressRemoteAlarms INTEGER,
muxIfHighSpeedMin Gauge32,
muxIfHighSpeedMax Gauge32,
muxIfTrxCodeMismatch FaultStatus,
muxIfTrxBitrateUnavailable FaultStatus,
muxIfTrxMissing FaultStatus,
muxIfTrxClass DisplayString,
muxIfTransmitterFailed FaultStatus,
muxIfUnexpectedFrequency FaultStatus,
muxIfIllegalFrequency FaultStatus,
muxIfReceiverSensitivity Integer32,
muxIfPowerLevelLowRelativeThreshold Integer32,
muxIfObjectProperty ObjectProperty,
muxIfTxPowerLevel Integer32,
muxIfLaserTempActual Integer32 }
muxIfIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index assigned to each if entry.
"
::= { muxIfEntry 1 }
muxIfName OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the interface,
for example 'muxi:1:2:1', where the first number
indicates sub-rack, the second slot number and
the third is the port number.
"
::= { muxIfEntry 2 }
muxIfDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User configurable label.
"
DEFVAL { "" }
::= { muxIfEntry 3 }
muxIfSubrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the subrack where the interface
is located.
"
::= { muxIfEntry 4 }
muxIfSlot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the slot where the interface is
located.
"
::= { muxIfEntry 5 }
muxIfTxPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the port where the TX-side of the
interface is located.
"
::= { muxIfEntry 6 }
muxIfRxPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the port where the RX-side of
the interface is located.
"
::= { muxIfEntry 7 }
muxIfInvPhysIndexOrZero OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The row in the invPhysTable for this interface.
Set to 0 if not known.
"
::= { muxIfEntry 8 }
muxIfPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received power level in units of 0.1 dBm.
"
::= { muxIfEntry 9 }
muxIfPowerLevelHighThreshold OBJECT-TYPE
SYNTAX Integer32 (-200..-10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper threshold for received power level in
units of 0.1 dBm.
"
DEFVAL { -50 }
::= { muxIfEntry 10 }
muxIfPowerLevelLowThreshold OBJECT-TYPE
SYNTAX Integer32 (-200..-10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower threshold for received power level in
units of 0.1 dBm.
"
DEFVAL { -160 }
::= { muxIfEntry 11 }
muxIfAdminStatus OBJECT-TYPE
SYNTAX BoardOrInterfaceAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative state for the interface.
down - The interface should be inactive.
service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-configuration. When service is concluded
adminStatus should be set to 'up' again.
up - The interface should be activated when
it becomes available. Alarms are not suppressed.
This attribute can be written via SNMP.
"
DEFVAL { up }
::= { muxIfEntry 12 }
muxIfOperStatus OBJECT-TYPE
SYNTAX BoardOrInterfaceOperStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state for the interface.
notPresent - The physical resources are not
available.
down - The interface is de-activated or the are
faults preventing it from going to the
'up'-state.
up - The interface is operational.
"
DEFVAL { notPresent }
::= { muxIfEntry 13 }
muxIfLossOfSignal OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Loss of signal.
Applicable for all signal formats.
A(ctivation): Active loss of signal HW indication.
D(e-activation): Inactive loss of signal HW
indication.
"
::= { muxIfEntry 14 }
muxIfReceivedPowerHigh OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received power level is too high.
Applicable for all signal formats.
A: The received power level exceeds the
the built-in overload threshold.
D: The received power level is 0.5 dB below the
overload threshold.
"
::= { muxIfEntry 15 }
muxIfReceivedPowerLow OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received power level low threshold exceeded.
Applicable for all signal formats.
A: The received power level is below the
associated threshold.
D: The received power level is 0.5 dB above
the threshold.
"
::= { muxIfEntry 16 }
muxIfBitrateMismatch OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bitrate mismatch (Other).
Applicable for other signal formats.
D: The interface is unable to lock to the
inserted signal.
D: The interface is able to lock to the
inserted signal.
"
::= { muxIfEntry 17 }
muxIfLaserBias OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measures laser bias current value in tenths
of mA (0.1 mA).
"
::= { muxIfEntry 18 }
muxIfLaserBiasThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the threshold for the laser bias alarm.
in percentage relative to the value set during
production. The preset value is 100%.
"
DEFVAL { 200 }
::= { muxIfEntry 19 }
muxIfJ0PathTrace OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1 | 16))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Note: This attribute is deprecated!
The recevied J0 path trace string.
Applicable for SDH/Sonet signal formats.
"
::= { muxIfEntry 20 }
muxIfAlarmIndicationSignal OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm indication signal.
Applicable for SDH/Sonet signal formats.
A: An 'all ones' SDH signal is detected.
D: SDH signal recovered.
"
::= { muxIfEntry 21 }
muxIfLossOfFrame OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Loss of frame.
Applicable for SDH/Sonet signal formats.
A: SDH frame can not be located.
D: SDH frame is located.
"
::= { muxIfEntry 22 }
muxIfLaserStatus OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of the TX-side laser.
off - The laser is turned off.
on - The laser is turned on.
"
::= { muxIfEntry 23 }
muxIfTxDirection OBJECT-TYPE
SYNTAX MuxTxDirection
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The direction of the transmitted signal.
undefined - Unknown/Dont care
toWest - The transmitted signal is sent to west.
toEast - The transmitted signal is sent to east.
"
::= { muxIfEntry 24 }
muxIfExpectedTxLambda OBJECT-TYPE
SYNTAX LambdaFrequency
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The expected frequency given in hundreds of
GHz (0.01 GHz).
This attribute can be written via SNMP.
"
DEFVAL { 0 }
::= { muxIfEntry 25 }
muxIfTxLambda OBJECT-TYPE
SYNTAX LambdaFrequency
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmitted frequency given in hundreds
of GHz (0.01 GHz).
"
::= { muxIfEntry 26 }
muxIfTraceIntrusionMode OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates wether the trace identifier should
be inserted in the transmitted signal.
disabled - The trace identifier is taken from
the recevied signal if possible.
enabled - The trace identifier set is inserted in
the transmitted signal.
"
::= { muxIfEntry 27 }
muxIfTraceTransmitted OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trace identifier to be transmitted from
this interface.
Set to empty string for default value:
<IP address>:<subrack>:<slot>:<port>
Note that only the last part of the address
is used.
"
DEFVAL { "" }
::= { muxIfEntry 28 }
muxIfTraceReceived OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received trace identifier for this interface.
"
::= { muxIfEntry 29 }
muxIfTraceExpected OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trace identifier used for matching against
the received trace identifier.
"
DEFVAL { "" }
::= { muxIfEntry 30 }
muxIfTraceAlarmMode OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls if the trace identifier mismatch alarm
should be raised.
disabled - The alarm is disabled.
enabled - The alarm is raised if expected trace
identifier differs from the received trace
identifier.
"
DEFVAL { disabled }
::= { muxIfEntry 31 }
muxIfTraceMismatch OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the expected trace identifier
differs from the received trace identifier.
A: The received trace identifier differs from
the expected trace identifier.
D: The identifiers match.
"
::= { muxIfEntry 32 }
muxIfOHTransparency OBJECT-TYPE
SYNTAX INTEGER {
off (1),
on (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 'OH Transparency' setting shall be set to 'off' for
standard SDH/SONET mode.
When set to 'on', the following tributary OH-bytes are
transparently transported:
E1, E2, F1, D1-D3, D4-D12, K1, K2
The following are always terminated:
J0, B1, B2, M1 and S1.
"
DEFVAL { off }
::= { muxIfEntry 33 }
muxIfSuppressRemoteAlarms OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
enabled (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Suppress AIS and RDI in the alarm list. The fault status on
the port object can, however, be seen.
disabled - alarms are not suppressed.
enabled - alarms are suppressed.
"
DEFVAL { disabled }
::= { muxIfEntry 34 }
muxIfHighSpeedMin OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minmum speed in units of 1,000,000 bits (Mb)
per second. If this object reports a value of 'n'
then the speed of the interface is somewhere in
the range of 'n-500,000' to 'n+499,999'.
"
::= { muxIfEntry 35 }
muxIfHighSpeedMax OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum speed in units of 1,000,000 bits per
second. If this object reports a value of 'n'
then the speed of the interface is somewhere in
the range of 'n-500,000' to 'n+499,999'.
"
::= { muxIfEntry 36 }
muxIfTrxCodeMismatch OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inserted transceiver does not have a legal
manufacturer code.
A: A transceiver with illegal code is inserted.
D: The transceiver with illegal code is removed.
"
::= { muxIfEntry 37 }
muxIfTrxBitrateUnavailable OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inserted transceiver does not support the requested
bit rate.
A: A transceiver with other supported bit rate than
the requested bit rate is inserted.
D: The transceiver with the non-requested bit rate is
removed, or the object is reconfigured.
"
::= { muxIfEntry 38 }
muxIfTrxMissing OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An expected transceiver is missing.
A: An expected transceiver is missing.
D: The missing transceiver is inserted.
"
::= { muxIfEntry 39 }
muxIfTrxClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"String that describes the transceiver class.
"
DEFVAL { "" }
::= { muxIfEntry 40 }
muxIfTransmitterFailed OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transceiver HW has detected a failure
in the transmitter part.
A: The transmitter has failed
D: The transmitter is OK again
"
::= { muxIfEntry 41 }
muxIfUnexpectedFrequency OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual frequency does not match the
pre-configured frequency.
A pre-configured frequency of '0' matches
all actual frequencies.
A: The configured frequency does not match the
actual frequency.
D: The configured frequency matches the actual
frequency.
"
::= { muxIfEntry 42 }
muxIfIllegalFrequency OBJECT-TYPE
SYNTAX FaultStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frequency supported by the transceiver is not
recognized by the system.
A: Invalid or unknown frequency information is
detected in the (pluggable) transceiver or
board production data.
D: The (pluggable) transceiver or board is
replaced.
"
::= { muxIfEntry 43 }
muxIfReceiverSensitivity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest power that the receiver is guaranteed
to handle, in units of 0.1 dBm.
"
::= { muxIfEntry 44 }
muxIfPowerLevelLowRelativeThreshold OBJECT-TYPE
SYNTAX Integer32 (-50..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower threshold for received power level in
units of 0.1 dB, relative to the receiver
sensitivity.
"
DEFVAL { 30 }
::= { muxIfEntry 45 }
muxIfObjectProperty OBJECT-TYPE
SYNTAX ObjectProperty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Property mask.
"
::= { muxIfEntry 46 }
muxIfTxPowerLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmitted power level in units of 0.1 dBm.
"
::= { muxIfEntry 47 }
muxIfLaserTempActual OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual laser temperature in units of
0.1 degrees centigrade.
"
::= { muxIfEntry 48 }
-- ----------------------------------------------------
-- MUX VC-4 objects
-- ----------------------------------------------------
muxVc4Table OBJECT-TYPE
SYNTAX SEQUENCE OF MuxVc4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface list."
::= { muxVc4List 1 }
muxVc4Entry OBJECT-TYPE
SYNTAX MuxVc4Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the interface list.
"
INDEX { muxVc4Index }
::= { muxVc4Table 1 }
MuxVc4Entry ::=
SEQUENCE {
muxVc4Index Unsigned32,
muxVc4Name MgmtNameString,
muxVc4Descr DisplayString,
muxVc4Subrack SubrackNumber,
muxVc4Slot SlotNumber,
muxVc4TxPort PortNumber,
muxVc4RxPort PortNumber,
muxVc4Vc4 Unsigned32,
muxVc4Mode INTEGER,
muxVc4ClientDropPort Unsigned32,
muxVc4TxDirection MuxTxDirection,
muxVc4ClientAddPort Unsigned32,
muxVc4ConnectionMode INTEGER,
muxVc4ConnectionStatus INTEGER,
muxVc4ConnectionOverview DisplayString,
muxVc4ObjectProperty ObjectProperty,
muxVc4AuAlarmIndicationSignalW2C INTEGER,
muxVc4AuLossOfPointerW2C INTEGER,
muxVc4RxSignalStatus INTEGER,
muxVc4ConcatenationStatus INTEGER,
muxVc4PayloadStatus INTEGER,
muxVc4AdminStatus INTEGER }
muxVc4Index OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary index assigned to each if entry.
"
::= { muxVc4Entry 1 }
muxVc4Name OBJECT-TYPE
SYNTAX MgmtNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management name of the vc4,
e.g. vc4:1:2:21-22:8 where the first number
indicates sub-rack, the second slot number and
the third/forth are the port numbers. The last
number is the vc4 id within the STM16 frame.
"
::= { muxVc4Entry 2 }
muxVc4Descr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User configurable label.
"
DEFVAL { "" }
::= { muxVc4Entry 3 }
muxVc4Subrack OBJECT-TYPE
SYNTAX SubrackNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the subrack where the vc4 is
located.
"
::= { muxVc4Entry 4 }
muxVc4Slot OBJECT-TYPE
SYNTAX SlotNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the slot where the vc4 is
located.
"
::= { muxVc4Entry 5 }
muxVc4TxPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the port where the TX-side of the
vc4 is located.
"
::= { muxVc4Entry 6 }
muxVc4RxPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the port where the RX-side of the
vc4 is located.
"
::= { muxVc4Entry 7 }
muxVc4Vc4 OBJECT-TYPE
SYNTAX Unsigned32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of the vc4 within the STM16 frame.
"
::= { muxVc4Entry 8 }
muxVc4Mode OBJECT-TYPE
SYNTAX INTEGER {
addDrop (1),
passThrough (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"What to do with the vc4.
addDrop - Add/drop it from/to the ports specified
by muxVc4ClientDropPort and muxVc4ClientAddPort.
passThrough - Pass-through.
"
::= { muxVc4Entry 9 }
muxVc4ClientDropPort OBJECT-TYPE
SYNTAX Unsigned32 (0..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connected drop port, if muxVc4Mode is
set to 'addDrop'.
0 is undefined (used at pass-through).
For mxp028:
1 - first SMT4 i/f
3 - second STM4 i/f
5 - first STM1 i/f
...
19 - 8th STM1 i/f
For mxp004:
1 - first STM1 i/f
...
7 - 4th STM1 i/f
"
DEFVAL { 0 }
::= { muxVc4Entry 10 }
muxVc4TxDirection OBJECT-TYPE
SYNTAX MuxTxDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction of the transmitted signal.
undefined - Unknown/Dont care
toWest - The transmitted signal is sent to west.
toEast - The transmitted signal is sent to east.
"
::= { muxVc4Entry 11 }
muxVc4ClientAddPort OBJECT-TYPE
SYNTAX Unsigned32 (0..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connected add port, if muxVc4Mode is set
to 'addDrop'.
0 is undefined (used at pass-through)
For mxp028:
2 - first SMT4 i/f
4 - second STM4 i/f
6 - first STM1 i/f
...
20 - 8th STM1 i/f
For mxp004:
2 - first STM1 i/f
...
8 - 4th STM1 i/f
"
::= { muxVc4Entry 12 }
muxVc4ConnectionMode OBJECT-TYPE
SYNTAX INTEGER {
unused (1),
ringUsed (2),
nodeUsed (3) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Describes how the VC is used in the ring and
the node.
unused - The VC4 is not used in the ring.
ringUsed - the VC4 is used in the ring,
but is not allowed to add/drop in this node.
nodeUsed - the VC4 is allowed to drop in this
node.
"
DEFVAL { unused }
::= { muxVc4Entry 13 }
muxVc4ConnectionStatus OBJECT-TYPE
SYNTAX INTEGER {
addDrop (1),
passThrough (2),
unconnected (3) }
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"How the VC4 is handled.
addDrop - Add/drop it from/to the ports specified
by muxVc4ClientDropPort and muxVc4ClientAddPort.
passThrough - Pass-through the node.
unconnected - The vc4 is not connected in the
ring.
"
::= { muxVc4Entry 14 }
muxVc4ConnectionOverview OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"What to do with the vc4.
addDrop - Add/drop it from/to the ports specified
by muxVc4ClientDropPort and muxVc4ClientAddPort.
passThrough - Pass-through the node.
"
::= { muxVc4Entry 15 }
muxVc4ObjectProperty OBJECT-TYPE
SYNTAX ObjectProperty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Property mask.
"
::= { muxVc4Entry 16 }
muxVc4AuAlarmIndicationSignalW2C OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
alarm (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm indication signal (AIS) on the trunk-side.
Applicable for SDH/Sonet signal formats.
A: An 'all ones' SDH signal is detected.
D: SDH signal recovered.
"
::= { muxVc4Entry 17 }
muxVc4AuLossOfPointerW2C OBJECT-TYPE
SYNTAX INTEGER {
ok (1),
alarm (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Loss of pointer detected on the trunk-side.
Applicable for SDH/Sonet signal formats.
A: A loss of pointer is detected.
D: SDH signal recovered.
"
::= { muxVc4Entry 18 }
muxVc4RxSignalStatus OBJECT-TYPE
SYNTAX INTEGER {
down (1),
degraded (2),
up (3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state for incoming (RX) signal
of the interface.
down - A fault that would lead to a protection
switch has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
"
::= { muxVc4Entry 19 }
muxVc4ConcatenationStatus OBJECT-TYPE
SYNTAX INTEGER {
on (1),
off (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes if the VC4s are concatenated.
on - Concatenation is used.
off - No concatenation is used.
"
::= { muxVc4Entry 20 }
muxVc4PayloadStatus OBJECT-TYPE
SYNTAX INTEGER {
equipped (1),
unequipped (2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes if the VC4 contains payload.
equipped - VC4 contains payload.
unequipped - No payload in VC4.
"
::= { muxVc4Entry 21 }
muxVc4AdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down (1),
up (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative state for the interface.
down - The interface should be inactive.
up - The interface should be activated when
it becomes available. Alarms are not suppressed.
"
DEFVAL { up }
::= { muxVc4Entry 22 }
-- ----------------------------------------------------
-- Notifications
-- ----------------------------------------------------
-- n/a
-- ----------------------------------------------------
-- Object and event groups
-- ----------------------------------------------------
muxGeneralGroup OBJECT-GROUP
OBJECTS {
muxGeneralLastChangeTime }
STATUS current
DESCRIPTION
"The general objects."
::= { lumMuxGroups 1 }
muxIfGroup OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow }
STATUS current
DESCRIPTION
"The general objects."
::= { lumMuxGroups 2 }
muxIfGroupV2 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfJ0PathTrace }
STATUS deprecated
DESCRIPTION
"The general objects."
::= { lumMuxGroups 3 }
muxIfGroupV3 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfJ0PathTrace,
muxIfAlarmIndicationSignal,
muxIfLossOfFrame }
STATUS deprecated
DESCRIPTION
"The mux trunk interface objects V3."
::= { lumMuxGroups 4 }
muxIfGroupV4 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfJ0PathTrace,
muxIfAlarmIndicationSignal,
muxIfLossOfFrame,
muxIfLaserStatus }
STATUS deprecated
DESCRIPTION
"The mux trunk interface objects V4."
::= { lumMuxGroups 5 }
muxGeneralGroupV2 OBJECT-GROUP
OBJECTS {
muxGeneralLastChangeTime,
muxGeneralStateLastChangeTime }
STATUS deprecated
DESCRIPTION
"The general objects."
::= { lumMuxGroups 6 }
muxVc4Group OBJECT-GROUP
OBJECTS {
muxVc4Index,
muxVc4Name,
muxVc4Descr,
muxVc4Subrack,
muxVc4Slot,
muxVc4TxPort,
muxVc4RxPort,
muxVc4Vc4,
muxVc4Mode,
muxVc4ClientDropPort }
STATUS deprecated
DESCRIPTION
"The vc4 objects."
::= { lumMuxGroups 7 }
muxIfGroupV5 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfJ0PathTrace,
muxIfAlarmIndicationSignal,
muxIfLossOfFrame,
muxIfLaserStatus,
muxIfTxDirection }
STATUS deprecated
DESCRIPTION
"The mux trunk interface objects V5."
::= { lumMuxGroups 8 }
muxVc4GroupV2 OBJECT-GROUP
OBJECTS {
muxVc4Index,
muxVc4Name,
muxVc4Descr,
muxVc4Subrack,
muxVc4Slot,
muxVc4TxPort,
muxVc4RxPort,
muxVc4Vc4,
muxVc4Mode,
muxVc4ClientDropPort,
muxVc4TxDirection,
muxVc4ClientAddPort }
STATUS deprecated
DESCRIPTION
"The vc4 objects."
::= { lumMuxGroups 9 }
muxIfGroupV6 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfJ0PathTrace,
muxIfAlarmIndicationSignal,
muxIfLossOfFrame,
muxIfLaserStatus,
muxIfTxDirection,
muxIfExpectedTxLambda,
muxIfTxLambda }
STATUS deprecated
DESCRIPTION
"The mux trunk interface objects V6."
::= { lumMuxGroups 10 }
muxIfGroupV7 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfJ0PathTrace,
muxIfAlarmIndicationSignal,
muxIfLossOfFrame,
muxIfLaserStatus,
muxIfTxDirection,
muxIfExpectedTxLambda,
muxIfTxLambda,
muxIfTraceIntrusionMode,
muxIfTraceTransmitted,
muxIfTraceReceived,
muxIfTraceExpected,
muxIfTraceAlarmMode,
muxIfTraceMismatch }
STATUS deprecated
DESCRIPTION
"The mux trunk interface objects V7."
::= { lumMuxGroups 11 }
muxIfGroupV8 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfJ0PathTrace,
muxIfAlarmIndicationSignal,
muxIfLossOfFrame,
muxIfLaserStatus,
muxIfTxDirection,
muxIfExpectedTxLambda,
muxIfTxLambda,
muxIfTraceIntrusionMode,
muxIfTraceTransmitted,
muxIfTraceReceived,
muxIfTraceExpected,
muxIfTraceAlarmMode,
muxIfTraceMismatch }
STATUS deprecated
DESCRIPTION
"The mux trunk interface objects V8."
::= { lumMuxGroups 12 }
muxVc4GroupV3 OBJECT-GROUP
OBJECTS {
muxVc4Index,
muxVc4Name,
muxVc4Descr,
muxVc4Subrack,
muxVc4Slot,
muxVc4TxPort,
muxVc4RxPort,
muxVc4Vc4,
muxVc4Mode,
muxVc4ClientDropPort,
muxVc4TxDirection,
muxVc4ClientAddPort,
muxVc4ConnectionMode,
muxVc4ConnectionStatus }
STATUS deprecated
DESCRIPTION
"The vc4 objects."
::= { lumMuxGroups 13 }
muxVc4GroupV4 OBJECT-GROUP
OBJECTS {
muxVc4Index,
muxVc4Name,
muxVc4Descr,
muxVc4Subrack,
muxVc4Slot,
muxVc4TxPort,
muxVc4RxPort,
muxVc4Vc4,
muxVc4ClientDropPort,
muxVc4TxDirection,
muxVc4ClientAddPort,
muxVc4ConnectionMode,
muxVc4ConnectionStatus,
muxVc4ConnectionOverview }
STATUS deprecated
DESCRIPTION
"The vc4 objects."
::= { lumMuxGroups 14 }
muxVc4GroupV5 OBJECT-GROUP
OBJECTS {
muxVc4Index,
muxVc4Name,
muxVc4Descr,
muxVc4Subrack,
muxVc4Slot,
muxVc4TxPort,
muxVc4RxPort,
muxVc4Vc4,
muxVc4ClientDropPort,
muxVc4TxDirection,
muxVc4ClientAddPort,
muxVc4ConnectionOverview }
STATUS deprecated
DESCRIPTION
"The vc4 objects."
::= { lumMuxGroups 15 }
muxIfGroupV9 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfJ0PathTrace,
muxIfAlarmIndicationSignal,
muxIfLossOfFrame,
muxIfLaserStatus,
muxIfTxDirection,
muxIfExpectedTxLambda,
muxIfTxLambda,
muxIfTraceIntrusionMode,
muxIfTraceTransmitted,
muxIfTraceReceived,
muxIfTraceExpected,
muxIfTraceAlarmMode,
muxIfTraceMismatch,
muxIfSuppressRemoteAlarms }
STATUS deprecated
DESCRIPTION
"The mux trunk interface objects V9."
::= { lumMuxGroups 16 }
muxIfGroupV10 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfAlarmIndicationSignal,
muxIfLossOfFrame,
muxIfLaserStatus,
muxIfTxDirection,
muxIfExpectedTxLambda,
muxIfTxLambda,
muxIfTraceIntrusionMode,
muxIfTraceTransmitted,
muxIfTraceReceived,
muxIfTraceExpected,
muxIfTraceAlarmMode,
muxIfTraceMismatch,
muxIfOHTransparency,
muxIfSuppressRemoteAlarms,
muxIfHighSpeedMin,
muxIfHighSpeedMax,
muxIfTrxCodeMismatch,
muxIfTrxBitrateUnavailable,
muxIfTrxMissing,
muxIfTrxClass,
muxIfTransmitterFailed }
STATUS deprecated
DESCRIPTION
"The mux trunk interface objects V10."
::= { lumMuxGroups 17 }
muxIfGroupV11 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfAlarmIndicationSignal,
muxIfLossOfFrame,
muxIfLaserStatus,
muxIfTxDirection,
muxIfExpectedTxLambda,
muxIfTxLambda,
muxIfTraceIntrusionMode,
muxIfTraceTransmitted,
muxIfTraceReceived,
muxIfTraceExpected,
muxIfTraceAlarmMode,
muxIfTraceMismatch,
muxIfOHTransparency,
muxIfSuppressRemoteAlarms,
muxIfHighSpeedMin,
muxIfHighSpeedMax,
muxIfTrxCodeMismatch,
muxIfTrxBitrateUnavailable,
muxIfTrxMissing,
muxIfTrxClass,
muxIfTransmitterFailed,
-- muxIfUnexpectedTxLambda,
muxIfIllegalFrequency,
muxIfReceiverSensitivity,
muxIfPowerLevelLowRelativeThreshold }
STATUS deprecated
DESCRIPTION
"The mux trunk interface objects V11. (2.2)"
::= { lumMuxGroups 18 }
muxGeneralGroupV3 OBJECT-GROUP
OBJECTS {
muxGeneralLastChangeTime,
muxGeneralStateLastChangeTime,
muxGeneralMuxIfTableSize,
muxGeneralMuxVc4TableSize }
STATUS current
DESCRIPTION
"The general objects."
::= { lumMuxGroups 19 }
muxIfGroupV12 OBJECT-GROUP
OBJECTS {
muxIfIndex,
muxIfName,
muxIfDescr,
muxIfSubrack,
muxIfSlot,
muxIfTxPort,
muxIfRxPort,
muxIfInvPhysIndexOrZero,
muxIfPowerLevel,
muxIfPowerLevelHighThreshold,
muxIfPowerLevelLowThreshold,
muxIfAdminStatus,
muxIfOperStatus,
muxIfLossOfSignal,
muxIfReceivedPowerHigh,
muxIfReceivedPowerLow,
muxIfBitrateMismatch,
muxIfLaserBias,
muxIfLaserBiasThreshold,
muxIfAlarmIndicationSignal,
muxIfLossOfFrame,
muxIfLaserStatus,
muxIfTxDirection,
muxIfExpectedTxLambda,
muxIfTxLambda,
muxIfTraceIntrusionMode,
muxIfTraceTransmitted,
muxIfTraceReceived,
muxIfTraceExpected,
muxIfTraceAlarmMode,
muxIfTraceMismatch,
muxIfOHTransparency,
muxIfSuppressRemoteAlarms,
muxIfHighSpeedMin,
muxIfHighSpeedMax,
muxIfTrxCodeMismatch,
muxIfTrxBitrateUnavailable,
muxIfTrxMissing,
muxIfTrxClass,
muxIfTransmitterFailed,
muxIfUnexpectedFrequency,
muxIfIllegalFrequency,
muxIfReceiverSensitivity,
muxIfPowerLevelLowRelativeThreshold,
muxIfObjectProperty,
muxIfTxPowerLevel,
muxIfLaserTempActual }
STATUS current
DESCRIPTION
"The mux trunk interface objects V12. (4.0)"
::= { lumMuxGroups 20 }
muxVc4GroupV6 OBJECT-GROUP
OBJECTS {
muxVc4Index,
muxVc4Name,
muxVc4Descr,
muxVc4Subrack,
muxVc4Slot,
muxVc4TxPort,
muxVc4RxPort,
muxVc4Vc4,
muxVc4ClientDropPort,
muxVc4TxDirection,
muxVc4ClientAddPort,
muxVc4ConnectionOverview,
muxVc4ObjectProperty }
STATUS deprecated
DESCRIPTION
"The vc4 objects (4.0)."
::= { lumMuxGroups 21 }
muxVc4GroupV7 OBJECT-GROUP
OBJECTS {
muxVc4Index,
muxVc4Name,
muxVc4Descr,
muxVc4Subrack,
muxVc4Slot,
muxVc4TxPort,
muxVc4RxPort,
muxVc4Vc4,
muxVc4ClientDropPort,
muxVc4TxDirection,
muxVc4ClientAddPort,
muxVc4ConnectionOverview,
muxVc4ObjectProperty,
muxVc4AuAlarmIndicationSignalW2C,
muxVc4AuLossOfPointerW2C,
muxVc4RxSignalStatus,
muxVc4ConcatenationStatus,
muxVc4PayloadStatus,
muxVc4AdminStatus }
STATUS current
DESCRIPTION
"The vc4 objects (8.0)."
::= { lumMuxGroups 22 }
-- ----------------------------------------------------
-- Compliance
-- ----------------------------------------------------
lumMuxBasicComplV1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Basic implementation requirements for the muxponder MIB."
MODULE
MANDATORY-GROUPS {
muxGeneralGroup,
muxIfGroup }
::= { lumMuxCompl 1 }
lumMuxBasicComplV2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V2."
MODULE
MANDATORY-GROUPS {
muxGeneralGroup,
muxIfGroupV2 }
::= { lumMuxCompl 2 }
lumMuxBasicComplV3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V3."
MODULE
MANDATORY-GROUPS {
muxGeneralGroup,
muxIfGroupV3 }
::= { lumMuxCompl 3 }
lumMuxBasicComplV4 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V4."
MODULE
MANDATORY-GROUPS {
muxGeneralGroup,
muxIfGroupV4 }
::= { lumMuxCompl 4 }
lumMuxBasicComplV5 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V5."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV4 }
::= { lumMuxCompl 5 }
lumMuxBasicComplV6 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V6."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV4,
muxVc4Group }
::= { lumMuxCompl 6 }
lumMuxBasicComplV7 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V7."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV5,
muxVc4Group }
::= { lumMuxCompl 7 }
lumMuxBasicComplV8 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V8."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV5,
muxVc4GroupV2 }
::= { lumMuxCompl 8 }
lumMuxBasicComplV9 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V9."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV6,
muxVc4GroupV2 }
::= { lumMuxCompl 9 }
lumMuxBasicComplV10 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V10."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV7,
muxVc4GroupV2 }
::= { lumMuxCompl 10 }
lumMuxBasicComplV11 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V11."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV8,
muxVc4GroupV2 }
::= { lumMuxCompl 11 }
lumMuxBasicComplV12 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V12."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV8,
muxVc4GroupV3 }
::= { lumMuxCompl 12 }
lumMuxBasicComplV13 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V13."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV8,
muxVc4GroupV4 }
::= { lumMuxCompl 13 }
lumMuxBasicComplV14 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V14."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV8,
muxVc4GroupV5 }
::= { lumMuxCompl 14 }
lumMuxBasicComplV15 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V15."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV9,
muxVc4GroupV5 }
::= { lumMuxCompl 15 }
lumMuxBasicComplV16 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V16."
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV10,
muxVc4GroupV5 }
::= { lumMuxCompl 16 }
lumMuxBasicComplV17 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V17. (2.2)"
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV2,
muxIfGroupV11,
muxVc4GroupV5 }
::= { lumMuxCompl 17 }
lumMuxBasicComplV18 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V18. (3.1)"
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV3,
muxIfGroupV11,
muxVc4GroupV5 }
::= { lumMuxCompl 18 }
lumMuxBasicComplV19 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V19. (4.0)"
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV3,
muxIfGroupV12,
muxVc4GroupV6 }
::= { lumMuxCompl 19 }
lumMuxBasicComplV20 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V20. (8.0)"
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV3,
muxIfGroupV12,
muxVc4GroupV7 }
::= { lumMuxCompl 20 }
lumMuxBasicComplV21 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Basic implementation requirements for the muxponder MIB V21. (17.0)"
MODULE
MANDATORY-GROUPS {
muxGeneralGroupV3,
muxIfGroupV12,
muxVc4GroupV7 }
::= { lumMuxCompl 21 }
END