WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/infinera/INFINERA-TP-DTPCTP-MIB

752 lines
23 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- INFINERA-TP-DTPCTP-MIB
--
-- October 2008, Sharfuddin Syed / Narendra Gupta
--
--
-- Copyright (c) 2008-2012 by Infinera Inc.
-- All rights reserved.
-- ****************************************************************
INFINERA-TP-DTPCTP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Counter64 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
DisplayString, TruthValue FROM SNMPv2-TC
ifIndex FROM IF-MIB
InfnServiceType FROM INFINERA-TC-MIB
terminationPoint FROM INFINERA-REG-MIB;
dtpCtpMIB MODULE-IDENTITY
LAST-UPDATED "200810200000Z"
ORGANIZATION "Infinera"
CONTACT-INFO
"Infinera
1322 Bordeaux Drive
Sunnyvale, CA - 94089
Contact : Technical Support
Email : support@infinera.com
Phone : 1-877-INF-5288"
DESCRIPTION
" "
REVISION "200810200000Z"
DESCRIPTION
"First Version"
::= { terminationPoint 7 }
dtpCtpTable OBJECT-TYPE
SYNTAX SEQUENCE OF DtpCtpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of DtpCtp entries. Each entry is uniquely identified by the value of ifIndex."
::= { dtpCtpMIB 1 }
dtpCtpEntry OBJECT-TYPE
SYNTAX DtpCtpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A DtpCtp entry containing information pertaining to Infinera DtpCtp interfaces. This table is a subclass
of IfCommon. Entries will exist in this table only for interfaces of type DtpCtp."
INDEX { ifIndex }
::= { dtpCtpTable 1 }
DtpCtpEntry ::= SEQUENCE {
dtpCtpCfgProtSt INTEGER,
dtpCtpProtMod INTEGER,
dtpCtpSwReason INTEGER,
dtpCtpSupportingTP DisplayString,
dtpCtpExpectedPayload InfnServiceType,
dtpCtpSupportingCircuitIdList DisplayString,
dtpCtpDetectedPayload InfnServiceType,
dtpCtpDataRate INTEGER,
dtpCtpLoopback INTEGER,
dtpCtpInsertDtpTti TruthValue,
dtpCtpTtiAlarmReporting INTEGER,
dtpCtpTxTtiAlarmReporting INTEGER,
dtpCtpTxDtpTti DisplayString,
dtpCtpRxDtpTtiWrite DisplayString,
dtpCtpExpectedDtpTti DisplayString,
dtpCtpExpectedTxDtpTti DisplayString,
dtpCtpRxDtpTti DisplayString,
dtpCtpRecvTxDtpTti DisplayString,
dtpCtpDtpRxCv15MinutesTce Counter64,
dtpCtpDtpRxEs15MinutesTce Integer32,
dtpCtpDtpRxSes15MinutesTce Integer32,
dtpCtpDtpRxUas15MinutesTce Integer32,
dtpCtpDtpRxCvDayTce Counter64,
dtpCtpDtpRxEsDayTce Integer32,
dtpCtpDtpRxSesDayTce Integer32,
dtpCtpDtpRxUasDayTce Integer32,
dtpCtpDtpTxCv15MinutesTce Counter64,
dtpCtpDtpTxEs15MinutesTce Integer32,
dtpCtpDtpTxSes15MinutesTce Integer32,
dtpCtpDtpTxUas15MinutesTce Integer32,
dtpCtpDtpTxCvDayTce Counter64,
dtpCtpDtpTxEsDayTce Integer32,
dtpCtpDtpTxSesDayTce Integer32,
dtpCtpDtpTxUasDayTce Integer32,
dtpCtpDtpRxCv15MinutesTceReporting TruthValue,
dtpCtpDtpRxEs15MinutesTceReporting TruthValue,
dtpCtpDtpRxSes15MinutesTceReporting TruthValue,
dtpCtpDtpRxUas15MinutesTceReporting TruthValue,
dtpCtpDtpRxCvDayTceReporting TruthValue,
dtpCtpDtpRxEsDayTceReporting TruthValue,
dtpCtpDtpRxSesDayTceReporting TruthValue,
dtpCtpDtpRxUasDayTceReporting TruthValue,
dtpCtpDtpTxCv15MinutesTceReporting TruthValue,
dtpCtpDtpTxEs15MinutesTceReporting TruthValue,
dtpCtpDtpTxSes15MinutesTceReporting TruthValue,
dtpCtpDtpTxUas15MinutesTceReporting TruthValue,
dtpCtpDtpTxCvDayTceReporting TruthValue,
dtpCtpDtpTxEsDayTceReporting TruthValue,
dtpCtpDtpTxSesDayTceReporting TruthValue,
dtpCtpDtpTxUasDayTceReporting TruthValue,
dtpCtpPrbsGenerationMode INTEGER,
dtpCtpPrbsMonitoringMode INTEGER,
dtpCtpNumDtpSubCh Integer32,
dtpCtpMuxMode TruthValue,
dtpCtpPmHistStatsEnable INTEGER,
dtpCtpCrossConnectType INTEGER
}
dtpCtpCfgProtSt OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
wrk(2),
prot(3),
relb(4),
pU(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The preferred state of the protection unit."
DEFVAL { unknown }
::= { dtpCtpEntry 1 }
dtpCtpProtMod OBJECT-TYPE
SYNTAX INTEGER {
none(1),
dtDSNCP(2),
stDSNCP(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Protection type viz STDSNCP, DTSNCP or None."
DEFVAL { none }
::= { dtpCtpEntry 2 }
dtpCtpSwReason OBJECT-TYPE
SYNTAX INTEGER {
mSwP(1),
mSwW(2),
wLck(3),
pLck(4),
auto(5),
none(6),
revert(7),
admLck(8),
unProv(9),
eqFlt(10),
liFlt(11),
liSF(12),
clRxFlt(13),
clTxFlt(14),
sysLof(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Sw Reason"
DEFVAL { none }
::= { dtpCtpEntry 3 }
dtpCtpSupportingTP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The corresponding AID of that particular DTPCTP."
::= { dtpCtpEntry 4 }
dtpCtpExpectedPayload OBJECT-TYPE
SYNTAX InfnServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload expected at this termination point."
::= { dtpCtpEntry 5 }
dtpCtpSupportingCircuitIdList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An unordered list of the CircuitId's associated with this groupTp object.
This string contains the string representation of each supporting
CircuitId, separated by a ';' (semicolon) if there is more than one."
::= { dtpCtpEntry 6 }
dtpCtpDetectedPayload OBJECT-TYPE
SYNTAX InfnServiceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Payload detected at this termination point."
::= { dtpCtpEntry 7 }
dtpCtpDataRate OBJECT-TYPE
SYNTAX INTEGER {
rateNotSet(1),
rate10GigAny(2),
rate2g500mAny(3),
rate1GogAny(4),
rate40GigAny(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Applicable to line DTPCTP and indicates the line data rate namley, 2.5G or 10G."
::= { dtpCtpEntry 8 }
dtpCtpLoopback OBJECT-TYPE
SYNTAX INTEGER {
none(1),
terminal(2),
facility(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag to enable the loopback."
DEFVAL { none }
::= { dtpCtpEntry 9 }
dtpCtpInsertDtpTti OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the TTI string to be entered and monitored at the far end."
DEFVAL { false }
::= { dtpCtpEntry 10 }
dtpCtpTtiAlarmReporting OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that indicates whether TTI alarm should be reported or not."
DEFVAL { disabled }
::= { dtpCtpEntry 11 }
dtpCtpTxTtiAlarmReporting OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that indicates whether TTI alarm will be reported or not."
DEFVAL { disabled }
::= { dtpCtpEntry 12 }
dtpCtpTxDtpTti OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The transmitted Dtp trail trace identifier."
::= { dtpCtpEntry 13 }
dtpCtpRxDtpTtiWrite OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Applicable only for DTPCTP on GT-TAM to transmit the TTI in receive direction."
::= { dtpCtpEntry 14 }
dtpCtpExpectedDtpTti OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The expected Dtp trail trace identifier."
::= { dtpCtpEntry 15 }
dtpCtpExpectedTxDtpTti OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Expected Tx TTI. If this is not equal to the zero-length string and it doesn't match<63>the recived TTI, an alarm will be raised."
::= { dtpCtpEntry 16 }
dtpCtpRxDtpTti OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received Dtp trail trace identifier."
::= { dtpCtpEntry 17 }
dtpCtpRecvTxDtpTti OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The received transmit Dtp trail trace identifier."
::= { dtpCtpEntry 18 }
dtpCtpDtpRxCv15MinutesTce OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of bit errors detected at the DTF path layer in 15 minutes."
::= { dtpCtpEntry 19 }
dtpCtpDtpRxEs15MinutesTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the number of seconds during which at least one DTF Path layer BIP error was detected or an AIS-P defect was present in 15 minutes."
DEFVAL { 120 }
::= { dtpCtpEntry 20 }
dtpCtpDtpRxSes15MinutesTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P defect was present in 15 minutes."
DEFVAL { 3 }
::= { dtpCtpEntry 21 }
dtpCtpDtpRxUas15MinutesTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the seconds during which the DTF Path considered unavailable. A DTF Path becomes unavailable at the onset of 10 consecutive seconds that qualify as DTF-DLMSES-P, and continues to be unavailable until the onset of 10 consecutive seconds that do not qualify as DTFDLM-SES-P in 15 minutes."
DEFVAL { 10 }
::= { dtpCtpEntry 22 }
dtpCtpDtpRxCvDayTce OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of bit errors detected at the DTF path layer in 24 hours"
::= { dtpCtpEntry 23 }
dtpCtpDtpRxEsDayTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the number of seconds during which at least one DTF Path layer BIP error was detected or an AIS-P defect was present in 24 hours."
DEFVAL { 1200 }
::= { dtpCtpEntry 24 }
dtpCtpDtpRxSesDayTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P defect was present in 24 hours."
DEFVAL { 7 }
::= { dtpCtpEntry 25 }
dtpCtpDtpRxUasDayTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the seconds during which the DTF Path considered unavailable. A DTF Path becomes unavailable at the onset of 10 consecutive seconds that qualify as DTF-DLMSES-P, and continues to be unavailable until the onset of 10 consecutive seconds that do not qualify as DTFDLM-SES-P in 24 hours."
DEFVAL { 10 }
::= { dtpCtpEntry 26 }
dtpCtpDtpTxCv15MinutesTce OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of bit errors detected at the DTF path layer in 15 minutes."
::= { dtpCtpEntry 27 }
dtpCtpDtpTxEs15MinutesTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P defect was present in 15 minutes."
DEFVAL { 120 }
::= { dtpCtpEntry 28 }
dtpCtpDtpTxSes15MinutesTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification)or more DTF Path layer BIP errors were detected or an AIS-P defect was present in 15 minutes."
DEFVAL { 3 }
::= { dtpCtpEntry 29 }
dtpCtpDtpTxUas15MinutesTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the seconds during which the DTF Path considered unavailable. A DTF Path becomes unavailable at the onset of 10 consecutive seconds that qualify as DTF-DLMSES-P, and continues to be unavailable until the onset of 10 consecutive seconds that do not qualify as DTFDLM-SES-P in 15 minutes."
DEFVAL { 10 }
::= { dtpCtpEntry 30 }
dtpCtpDtpTxCvDayTce OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of bit errors detected at the DTF path layer in 24 hours."
::= { dtpCtpEntry 31 }
dtpCtpDtpTxEsDayTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P defect was present in 24 hours."
DEFVAL { 1200 }
::= { dtpCtpEntry 32 }
dtpCtpDtpTxSesDayTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification)or more DTF Path layer BIP errors were detected or an AIS-P defect was present in 24 hours."
DEFVAL { 7 }
::= { dtpCtpEntry 33 }
dtpCtpDtpTxUasDayTce OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Count of the seconds during which the DTF Path considered unavailable. A DTF Path becomes unavailable at the onset of 10 consecutive seconds that qualify as DTF-DLMSES-P, and continues to be unavailable until the onset of 10 consecutive seconds that do not qualify as DTFDLM-SES-P in 24 hours."
DEFVAL { 10 }
::= { dtpCtpEntry 34 }
dtpCtpDtpRxCv15MinutesTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables DtpRxCv15MinutesTce threshold crossing."
DEFVAL { false }
::= { dtpCtpEntry 35 }
dtpCtpDtpRxEs15MinutesTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpRxEs15MinutesTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 36 }
dtpCtpDtpRxSes15MinutesTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpRxSes15MinutesTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 37 }
dtpCtpDtpRxUas15MinutesTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpRxUas15MinutesTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 38 }
dtpCtpDtpRxCvDayTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables DtpRxCvDayTce threshold crossing."
DEFVAL { false }
::= { dtpCtpEntry 39 }
dtpCtpDtpRxEsDayTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpEsDayTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 40 }
dtpCtpDtpRxSesDayTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpRxSesDayTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 41 }
dtpCtpDtpRxUasDayTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpRxUasDayTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 42 }
dtpCtpDtpTxCv15MinutesTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpTxCv15MinutesTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 43 }
dtpCtpDtpTxEs15MinutesTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpTxEs15MinutesTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 44 }
dtpCtpDtpTxSes15MinutesTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpTxSes15MinutesTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 45 }
dtpCtpDtpTxUas15MinutesTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpTxUas15MinutesTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 46 }
dtpCtpDtpTxCvDayTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpTxCvDayTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 47 }
dtpCtpDtpTxEsDayTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpTxEsDayTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 48 }
dtpCtpDtpTxSesDayTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpTxSesDayTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 49 }
dtpCtpDtpTxUasDayTceReporting OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag that enables the reporting of DtpTxUasDayTce crossing."
DEFVAL { false }
::= { dtpCtpEntry 50 }
dtpCtpPrbsGenerationMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag which enables the generation of PRBS data on the transmit side."
DEFVAL { disabled }
::= { dtpCtpEntry 51 }
dtpCtpPrbsMonitoringMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag which enables the monitoring of bit errors."
DEFVAL { disabled }
::= { dtpCtpEntry 52 }
dtpCtpNumDtpSubCh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of channels muxed to a channlized cross-connect/snc."
DEFVAL { 0 }
::= { dtpCtpEntry 53 }
dtpCtpMuxMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Flag that indicates whether the DTF is operating in multiplexed-mode (encapsulation of two GbE client tributaries) or not. For 8x1GbE TAM, the Mux mode is <20>on<6F> by default."
DEFVAL { false }
::= { dtpCtpEntry 54 }
dtpCtpPmHistStatsEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag to enable PM collection."
DEFVAL { disabled }
::= { dtpCtpEntry 55 }
dtpCtpCrossConnectType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
unidirectionFrom(2),
unidirectionTo(3),
unidirectionToAndFrom(4),
bidirection(5),
bidirectionUnidirectionFrom(6),
bidirectionUnidirectionTo(7),
bidirectionUnidirectionToAndFrom(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of cross-connect."
DEFVAL { none }
::= { dtpCtpEntry 56 }
-- Conformance Statements
dtpCtpConformance OBJECT IDENTIFIER ::= { dtpCtpMIB 3 }
dtpCtpCompliances OBJECT IDENTIFIER ::= { dtpCtpConformance 1 }
dtpCtpGroups OBJECT IDENTIFIER ::= { dtpCtpConformance 2 }
dtpCtpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the DTPCTP-MIB"
MODULE
MANDATORY-GROUPS { dtpCtpGroup }
::= { dtpCtpCompliances 1 }
dtpCtpGroup OBJECT-GROUP
OBJECTS {
dtpCtpCfgProtSt,
dtpCtpProtMod,
dtpCtpSwReason,
dtpCtpSupportingTP,
dtpCtpExpectedPayload,
dtpCtpSupportingCircuitIdList,
dtpCtpDetectedPayload,
dtpCtpDataRate,
dtpCtpLoopback,
dtpCtpInsertDtpTti,
dtpCtpTtiAlarmReporting,
dtpCtpTxTtiAlarmReporting,
dtpCtpTxDtpTti,
dtpCtpRxDtpTtiWrite,
dtpCtpExpectedDtpTti,
dtpCtpExpectedTxDtpTti,
dtpCtpRxDtpTti,
dtpCtpRecvTxDtpTti,
dtpCtpDtpRxCv15MinutesTce,
dtpCtpDtpRxEs15MinutesTce,
dtpCtpDtpRxSes15MinutesTce,
dtpCtpDtpRxUas15MinutesTce,
dtpCtpDtpRxCvDayTce,
dtpCtpDtpRxEsDayTce,
dtpCtpDtpRxSesDayTce,
dtpCtpDtpRxUasDayTce,
dtpCtpDtpTxCv15MinutesTce,
dtpCtpDtpTxEs15MinutesTce,
dtpCtpDtpTxSes15MinutesTce,
dtpCtpDtpTxUas15MinutesTce,
dtpCtpDtpTxCvDayTce,
dtpCtpDtpTxEsDayTce,
dtpCtpDtpTxSesDayTce,
dtpCtpDtpTxUasDayTce,
dtpCtpDtpRxCv15MinutesTceReporting,
dtpCtpDtpRxEs15MinutesTceReporting,
dtpCtpDtpRxSes15MinutesTceReporting,
dtpCtpDtpRxUas15MinutesTceReporting,
dtpCtpDtpRxCvDayTceReporting,
dtpCtpDtpRxEsDayTceReporting,
dtpCtpDtpRxSesDayTceReporting,
dtpCtpDtpRxUasDayTceReporting,
dtpCtpDtpTxCv15MinutesTceReporting,
dtpCtpDtpTxEs15MinutesTceReporting,
dtpCtpDtpTxSes15MinutesTceReporting,
dtpCtpDtpTxUas15MinutesTceReporting,
dtpCtpDtpTxCvDayTceReporting,
dtpCtpDtpTxEsDayTceReporting,
dtpCtpDtpTxSesDayTceReporting,
dtpCtpDtpTxUasDayTceReporting,
dtpCtpPrbsGenerationMode,
dtpCtpPrbsMonitoringMode,
dtpCtpNumDtpSubCh,
dtpCtpMuxMode,
dtpCtpPmHistStatsEnable,
dtpCtpCrossConnectType
}
STATUS current
DESCRIPTION
" A collection of objects for managing the dtpCtp"
::= { dtpCtpGroups 1 }
END
View Git Blame Copy Permalink