WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/ibm/LENOVO-GbTOR-G7052-MIB

33815 lines
922 KiB
Plaintext
Raw Blame History

-- ----------------------------------------------------------------------------
-- File Main Owner:
-- File Peer Owner:
-- File Description: Main entry point to build private MIBs.
--
--
-- { COPYRIGHT / HISTORY
--
-- COPYRIGHT NOTICE
-- Copyright (c) Lenovo 2014 -
-- All rights reserved
--
--
-- PORTING HISTORY
--
-- } COPYRIGHT / HISTORY (end)
--
-- ----------------------------------------------------------------------------
-- { INSERT: blade
-- ----------------------------------------------------------------------------
LENOVO-GbTOR-G7052-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, Integer32, Unsigned32, Counter32, Gauge32, Counter64,
TimeTicks, IpAddress
FROM SNMPv2-SMI
DisplayString, PhysAddress, MacAddress, TruthValue, RowStatus
FROM SNMPv2-TC
BridgeId
FROM BRIDGE-MIB
sysName, sysLocation, sysContact, ifIndex
FROM RFC1213-MIB
enterprises
FROM RFC1155-SMI
InetAddressType, InetAddress, InetAddressIPv6
FROM INET-ADDRESS-MIB
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY,
Integer32, Unsigned32, Counter32, Gauge32, Counter64,
TimeTicks, IpAddress, mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, DisplayString, PhysAddress,
MacAddress, RowStatus, TimeInterval, TimeStamp, RowPointer,
AutonomousType, StorageType, TDomain, TAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
BridgeId, dot1dTp, dot1dTpPort, dot1dBridge, dot1dBasePortEntry,
dot1dBasePort
FROM BRIDGE-MIB
EnabledStatus
FROM P-BRIDGE-MIB
PortList
FROM Q-BRIDGE-MIB
SnmpAdminString, SnmpEngineID,SnmpMessageProcessingModel,
SnmpSecurityModel,SnmpSecurityLevel FROM SNMP-FRAMEWORK-MIB
usmNoAuthProtocol, usmNoPrivProtocol FROM SNMP-USER-BASED-SM-MIB
sysName, sysLocation, sysContact, ifIndex
FROM RFC1213-MIB
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
;
-- ----------------------------------------------------------------------------
-- { INSERT: module identity
-- ----------------------------------------------------------------------------
ibmGbTORG7052MIB MODULE-IDENTITY
LAST-UPDATED "201809072232Z" -- Sep 07, 2018 10:32:32 PM
ORGANIZATION "Lenovo"
CONTACT-INFO "
Lenovo
3325 Scott Blvd.
Santa Clara, CA 95054
"
DESCRIPTION "
MIB for Lenovo RackSwitch G7052
All Rights reserved
DEVICE VERSION: 8.4.12.0
"
::= { ibmnetwork 3 }
-- ----------------------------------------------------------------------------
-- } INSERT: module identity
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- { INSERT: textual conventions
-- ----------------------------------------------------------------------------
PortNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a port number of a switch."
SYNTAX Unsigned32
VlanId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A 12-bit VLAN ID used in the VLAN Tag header."
SYNTAX Integer32 (1..4094)
Timeout ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d4"
STATUS current
DESCRIPTION
" Time out value in 4 byte"
SYNTAX Integer32
-- ----------------------------------------------------------------------------
-- } INSERT: textual conventions
-- ----------------------------------------------------------------------------
-- blade OID reference http://www.iana.org/assignments/enterprise-numbers
-- defined in /vobs/webos/src/lib/epi/target/h/wrn/wm/snmp/engine/mib.h
ibmnetwork OBJECT IDENTIFIER ::= { enterprises 20301 }
-- Groups in blade
registration OBJECT IDENTIFIER ::= { ibmnetwork 1 }
private-mibs OBJECT IDENTIFIER ::= { ibmnetwork 2 }
-- Access Switch for BNT Private MIBs
-- bnt-switch OBJECT IDENTIFIER ::= { private-mibs 7 }
-- ----------------------------------------------------------------------------
-- { INSERT: bntRoot
-- ----------------------------------------------------------------------------
-- Access Web Switch Module for Private MIBs
ibm-switch-mgmt OBJECT IDENTIFIER
::= { private-mibs 7 }
g7052-mgmt OBJECT IDENTIFIER
::= { ibm-switch-mgmt 18 }
-------------------------------------------------------------------------------
-- Platform Dependent Registration sysObjectID
-- Must correspond to g_sysobjid in /vobs/webos/src/<bert>/ts/mp/sys/config.c
-- and defined in /vobs/webos/src/lib/epi/target/h/wrn/wm/snmp/engine/mib.h.
-- Careful when re-numbering sysObjectIDs due to hard coded references in
-- /vobs/webos/src/<bert>/ts/mp/epi/trap.c
-------------------------------------------------------------------------------
-- Top of Rack Switch
ibm-switch OBJECT IDENTIFIER
::= { registration 7 }
g7052 OBJECT IDENTIFIER
::= { ibm-switch 18 } -- G7052 switch
-------------------------------------------------------------------------------
-- Platform Common Private MIBs for g7052-mgmt
-------------------------------------------------------------------------------
agent OBJECT IDENTIFIER ::= { g7052-mgmt 1 }
-- ----------------------------------------------------------------------------
-- { INSERT: agent
-- ----------------------------------------------------------------------------
agentConfig OBJECT IDENTIFIER ::= { agent 1 }
agentStats OBJECT IDENTIFIER ::= { agent 2 }
agentInfo OBJECT IDENTIFIER ::= { agent 3 }
agentOper OBJECT IDENTIFIER ::= { agent 4 }
agSystem OBJECT IDENTIFIER ::= { agentConfig 1 }
agPortConfig OBJECT IDENTIFIER ::= { agentConfig 2 }
agRadiusConfig OBJECT IDENTIFIER ::= { agentConfig 3 }
agNTP OBJECT IDENTIFIER ::= { agentConfig 4 }
agSyslog OBJECT IDENTIFIER ::= { agentConfig 5 }
agTransfer OBJECT IDENTIFIER ::= { agentConfig 7 }
agApply OBJECT IDENTIFIER ::= { agentConfig 8 }
agTacacsConfig OBJECT IDENTIFIER ::= { agentConfig 11 }
agMgmtNetConfig OBJECT IDENTIFIER ::= { agentConfig 12 }
agBoot OBJECT IDENTIFIER ::= { agentConfig 13 }
agAccess OBJECT IDENTIFIER ::= { agentConfig 19 }
agLdapConfig OBJECT IDENTIFIER ::= { agentConfig 21 }
agSSHConfig OBJECT IDENTIFIER ::= { agentConfig 22 }
agUSBCopy OBJECT IDENTIFIER ::= { agentConfig 25 }
agCSRConfig OBJECT IDENTIFIER ::= { agentConfig 31 }
pktStats OBJECT IDENTIFIER ::= { agentStats 1 }
mpCpuStats OBJECT IDENTIFIER ::= { agentStats 2 }
portStats OBJECT IDENTIFIER ::= { agentStats 3 }
agClearStats OBJECT IDENTIFIER ::= { agentStats 7 }
ntpStats OBJECT IDENTIFIER ::= { agentStats 9 }
aclStats OBJECT IDENTIFIER ::= { agentStats 11 }
memoryStats OBJECT IDENTIFIER ::= { agentStats 12 }
snmpStats OBJECT IDENTIFIER ::= { agentStats 20 }
mpTcbStats OBJECT IDENTIFIER ::= { agentStats 21 }
mpUdpStats OBJECT IDENTIFIER ::= { agentStats 22 }
hardware OBJECT IDENTIFIER ::= { agentInfo 1 }
portInfo OBJECT IDENTIFIER ::= { agentInfo 2 }
agDiff OBJECT IDENTIFIER ::= { agentInfo 4 }
agCfgDump OBJECT IDENTIFIER ::= { agentInfo 5 }
geaportInfo OBJECT IDENTIFIER ::= { agentInfo 9 }
sfpInfo OBJECT IDENTIFIER ::= { agentInfo 11 }
accessInfo OBJECT IDENTIFIER ::= { agentInfo 13 }
agNTPOper OBJECT IDENTIFIER ::= { agentOper 2 }
-- There are two configuration blocks.
-- The "current_config" reflects the configuration parameters that the
-- switch is operating on and it is read-only. The objects with "CurCfg"
-- in the name are reflect to this configuration block.
--
-- The "new_config" accepts user configurations on set. The objects with
-- "NewCfg" in the name are reflect to this configuration block.
--
-- The newly set configurations will not take effect until a "apply"
-- command has been issued (See agApplyConfiguration object)
--
-- The newly set configurations will not be saved through next restarting
-- of the switch unless a "save" command has been issued (See
-- agSaveConfiguration object).
-- Port operation table
agPortOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port operations."
::= { agentOper 1 }
agPortOperTableEntry OBJECT-TYPE
SYNTAX AgPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port operations table."
INDEX { portOperIdx }
::= { agPortOperTable 1 }
AgPortOperTableEntry ::=
SEQUENCE {
portOperIdx PortNumber,
portOperRmon INTEGER,
portOperLearning INTEGER,
portOperState INTEGER
,portOperAlias DisplayString
}
portOperIdx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { agPortOperTableEntry 1 }
portOperState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable port."
::= { agPortOperTableEntry 2 }
portOperRmon OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable RMON for port."
::= { agPortOperTableEntry 3 }
portOperLearning OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable L2 (FDB) Learning for this port."
::= { agPortOperTableEntry 4 }
portOperAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias.."
::= { agPortOperTableEntry 5 }
--portOperDot1x OBJECT IDENTIFIER ::= { agPortOperTableEntry 4 }
portOperDot1xTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortOperDot1xTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port operations."
::= { agentOper 4 }
portOperDot1xTableEntry OBJECT-TYPE
SYNTAX PortOperDot1xTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port 802.1x operation table."
INDEX { portOperDot1xIndx }
::= { portOperDot1xTable 1 }
PortOperDot1xTableEntry ::= SEQUENCE {
portOperDot1xIndx PortNumber,
portOperDot1xReset INTEGER,
portOperDot1xReauth INTEGER
,portOperDot1xPortAlias DisplayString
}
portOperDot1xIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portOperDot1xTableEntry 1 }
portOperDot1xReset OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reinitialize 802.1x access control on port."
::= { portOperDot1xTableEntry 2 }
portOperDot1xReauth OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Initiate reauthentication on port."
::= { portOperDot1xTableEntry 3 }
portOperDot1xPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { portOperDot1xTableEntry 4 }
ntpOperSendReq OBJECT-TYPE
SYNTAX INTEGER {
no(1),
yes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allows the user to send requests to the NTP server."
::= { agNTPOper 1 }
-- Oper PRM settings
agSrvLedOper OBJECT IDENTIFIER ::= { agentOper 5 }
srvLedOper OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Service Required LED."
::= { agSrvLedOper 1 }
-- Port information table
portInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port information."
::= { portInfo 1 }
portInfoTableEntry OBJECT-TYPE
SYNTAX PortInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port information table."
INDEX { portInfoIndx }
::= { portInfoTable 1 }
PortInfoTableEntry ::= SEQUENCE {
portInfoIndx PortNumber,
portInfoSpeed INTEGER,
portInfoMode INTEGER,
portInfoFlowCtrl INTEGER,
portInfoLink INTEGER,
portInfoPhyIfDescr DisplayString,
portInfoPhyIfType INTEGER,
portInfoPhyIfMtu Integer32,
portInfoPhyIfPhysAddress PhysAddress,
portInfoPhyIfOperStatus INTEGER,
portInfoPhyIfLastChange TimeTicks,
portInfoLearning INTEGER,
portInfoBpduGuard INTEGER,
portInfoPvid Unsigned32,
portInfoVlanTag INTEGER
,portInfoErrDisableRecovery INTEGER
,portInfoErrDisableTimeLeft INTEGER
,portInfoExtGuard INTEGER
,portInfoLFDState INTEGER
,portInfoAlias DisplayString
}
portInfoIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portInfoTableEntry 1 }
portInfoSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
mbs1000(4),
any(5)
,
mbs10000(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational speed of the port."
::= { portInfoTableEntry 2 }
portInfoMode OBJECT-TYPE
SYNTAX INTEGER {
full-duplex(2),
half-duplex(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational mode of the port."
::= { portInfoTableEntry 3 }
portInfoFlowCtrl OBJECT-TYPE
SYNTAX INTEGER {
transmit(2),
receive(3),
both(4),
none(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational flow control of the port."
::= { portInfoTableEntry 4 }
portInfoLink OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
disabled(3),
inoperative(4), -- unrecognized PCI device
errdisabled(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational link status of the port."
::= { portInfoTableEntry 5 }
portInfoPhyIfDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface."
::= { portInfoTableEntry 6 }
portInfoPhyIfType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
regular1822(2),
hdh1822(3),
ddn-x25(4),
rfc877-x25(5),
ethernet-csmacd(6),
iso88023-csmacd(7),
iso88024-tokenBus(8),
iso88025-tokenRing(9),
iso88026-man(10),
starLan(11),
proteon-10Mbit(12),
proteon-80Mbit(13),
hyperchannel(14),
fddi(15),
lapb(16),
sdlc(17),
ds1(18), -- T-1
e1(19), -- european equiv. of T-1
basicISDN(20),
primaryISDN(21), -- proprietary serial
propPointToPointSerial(22),
ppp(23),
softwareLoopback(24),
eon(25), -- CLNP over IP [11]
ethernet-3Mbit(26),
nsip(27), -- XNS over IP
slip(28), -- generic SLIP
ultra(29), -- ULTRA technologies
ds3(30), -- T-3
sip(31), -- SMDS
frame-relay(32)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack."
::= { portInfoTableEntry 7 }
portInfoPhyIfMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that can be sent
on the interface."
::= { portInfoTableEntry 8 }
portInfoPhyIfPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length."
::= { portInfoTableEntry 9 }
portInfoPhyIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed."
::= { portInfoTableEntry 10 }
portInfoPhyIfLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object contains a zero
value."
::= { portInfoTableEntry 11 }
portInfoLearning OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port L2 (FDB) Learning state."
::= { portInfoTableEntry 18 }
portInfoBpduGuard OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of BPDU Guard on the port."
::= { portInfoTableEntry 20 }
portInfoPvid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the operational port vlan-id of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgPVID object. But if, for example, 802.1x is
enabled on the port and the port is assigned a vlan-id via
802.1x, this port will be moved to the assigned vlan even
when the port is configured with a different PVID."
::= { portInfoTableEntry 21}
portInfoVlanTag OBJECT-TYPE
SYNTAX INTEGER {
untagged(0),
tagged(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the operational VLAN tag state of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgVlanTag objec. But if, for example, 802.1x is
enabled on the port and if the port is assigned a vlan via
802.1x, the port will be operationally untagged even when the
port is configured to be tagged."
::= { portInfoTableEntry 22}
portInfoErrDisableRecovery OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is in error-disabled state when it has been operationally
disabled by the system due to an error condition.
The value of this object is 'enable' if the values of both
the global agCurCfgErrDisableRecovery object and the port's
agPortCurCfgErrDisableRecovery object are 'enable'."
::= { portInfoTableEntry 23 }
portInfoErrDisableTimeLeft OBJECT-TYPE
SYNTAX INTEGER (0 .. 86400)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the portInfoErrDisableRecovery object has a value of 'enable'
and the portInfoLink object has a value of 'errdisabled', the
value of this object indicates the remaining time, in seconds,
before the system automatically re-enables this port."
::= { portInfoTableEntry 24 }
portInfoExtGuard OBJECT-TYPE
SYNTAX INTEGER {
loop(1),
root(2),
global-loop(3),
no-guard(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of STP Loop/Root Guard on the port."
::= { portInfoTableEntry 25 }
portInfoLFDState OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the port is error-disabled due
to excessive link flaps. The value of this object is 'yes'
if the port is error-disabled due to excessive link flaps,
otherwise the value is 'no'."
::= { portInfoTableEntry 26 }
portInfoAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alias of the row in portInfo configuration table."
::= { portInfoTableEntry 27 }
-- Agent System Group
-- This group of objects take effect on the 'SET' request.
-- There is no need to 'apply' or 'save'.
agApplyConfiguration OBJECT-TYPE
SYNTAX INTEGER {
other(1),
apply(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to apply the changes made to configuration
of the switch. By setting the value to apply(2), all the changes
made since the last apply are written to the new configuration block.
other(1) is returned when this object ie read.
This object is deprecated. Use agApplyConfig instead."
::= { agSystem 2 }
agSavePending OBJECT-TYPE
SYNTAX INTEGER {
saveNeeded(1),
noSaveNeeded(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash."
::= { agSystem 3 }
agSaveConfiguration OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
saveActive(2),
notSaveActive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup in flash and then the new
configuration is saved to the active configuration in flash.
When issued with notSaveActive, the active configuration
is NOT saved to the flash and the active configuration is
overwritten with the new configuration.
ok(1) is returned always when read."
::= { agSystem 4 }
agRevert OBJECT-TYPE
SYNTAX INTEGER {
other(1),
revert(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to revert the unapplied changes
made to the switch. By setting the value to revert(2),
all the unapplied changes will be reverted. This action
will copy the current_config to the new configuration block.
other(1) is returned when this object is read. "
::= { agSystem 5 }
agRevertApply OBJECT-TYPE
SYNTAX INTEGER {
other(1),
revertApply(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted.
other(1) is returned when this object is read. "
::= { agSystem 6 }
agReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
,resetNoDump(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reboot the agent.
other(1) is returned always when read."
::= { agSystem 7 }
agConfigForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
active(2),
backup(3),
default(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block"
::= { agSystem 8 }
agImageForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2
"
::= { agSystem 9 }
agSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available."
::= { agSystem 10 }
agBootVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available."
::= { agSystem 11 }
agImage1Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { agSystem 12 }
agImage2Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { agSystem 13 }
agRtcDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The date on the real time clock in the form of 'mm/dd/yy'.
A zero length string is returned if date is not available."
::= { agSystem 14 }
agRtcTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time on the real time clock in the form of 'hh:mm:ss'.
A zero length string is returned if time is not available."
::= { agSystem 15 }
agLastSetErrorReason OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error reason of the last SET failure."
::= { agSystem 16 }
agCurCfgHttpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the HTTP server is listening to
in the current configuration block."
::= { agSystem 17 }
agNewCfgHttpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the HTTP server is listening to
in the new configuration block."
::= { agSystem 18 }
agCurCfgLoginBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user defined login banner."
::= { agSystem 19 }
agNewCfgLoginBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user defined login banner."
::= { agSystem 20 }
agCurCfgLoginNotice OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user defined login notice."
::= { agSystem 78 }
agNewCfgLoginNotice OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user defined login notice."
::= { agSystem 79 }
agCurCfgConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable console output of syslog messages."
::= { agSystem 23 }
agNewCfgConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable console output of syslog messages."
::= { agSystem 24 }
agSlotNumber OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the slot in which this switch is installed. If the
agent implementing this MIB is not a blade in a chassis this
value has no meaning."
::= { agSystem 31 }
agCurCfgSnmpTimeout OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the state
back to 'idle' so others can issue the commands via SNMP.
agSnmpTimeout indicates the number of minutes before the resources
are freed and the state set back to 'idle' if this operation is not
performed by the user."
::= { agSystem 32 }
agNewCfgSnmpTimeout OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the state
back to 'idle' so others can issue the commands via SNMP.
agSnmpTimeout indicates the number of minutes before the resources
are freed and the state set back to 'idle' if this operation is not
performed by the user."
::= { agSystem 33 }
agCurCfgTelnetServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the telnet server listens for telnet
sessions."
::= { agSystem 34 }
agNewCfgTelnetServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the telnet server listens for telnet
sessions."
::= { agSystem 35 }
agClearFlashDump OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to clear the FLASH dump.
ok(1) is returned when this object is read. "
::= { agSystem 36 }
agCurCfgTrapSrcIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNMP trap source interface number."
::= { agSystem 39 }
agNewCfgTrapSrcIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SNMP trap source interface number."
::= { agSystem 40 }
agCurCfgHttpsServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the HTTPS server is listening to
in the current configuration block."
::= { agSystem 49 }
agNewCfgHttpsServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the HTTPS server is listening to
in the new configuration block."
::= { agSystem 50 }
agCurCfgTftpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the TFTP server is listening to
in the current configuration block."
::= { agSystem 51 }
agNewCfgTftpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the TFTP server is listening to
in the new configuration block."
::= { agSystem 52 }
agRackId OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rack unique identifier."
::= { agSystem 53 }
agChassis OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Chassis serial number."
::= { agSystem 54 }
agCurTimeZone OBJECT-TYPE
SYNTAX INTEGER {
none(0),
africa-Algeria(1),
africa-Angola(2),
africa-Benin(3),
africa-Botswana(4),
africa-Burkina-Faso(5),
africa-Burundi(6),
africa-Cameroon(7),
africa-Central-African-Rep(8),
africa-Chad(9),
africa-Congo-WestDemRepCongo(10),
africa-Congo-EastDemRepCongo(11),
africa-Congo-Rep(12),
africa-Cote-dIvoire(13),
africa-Djibouti(14),
africa-Egypt(15),
africa-Equatorial-Guinea(16),
africa-Eritrea(17),
africa-Ethiopia(18),
africa-Gabon(19),
africa-Gambia(20),
africa-Ghana(21),
africa-Guinea(22),
africa-Guinea-Bissau(23),
africa-Kenya(24),
africa-Lesotho(25),
africa-Liberia(26),
africa-Libya(27),
africa-Malawi(28),
africa-Mali-SouthWestMali(29),
africa-Mali-NorthEastMali(30),
africa-Mauritania(31),
africa-Morocco(32),
africa-Mozambique(33),
africa-Namibia(34),
africa-Niger(35),
africa-Nigeria(36),
africa-Rwanda(37),
africa-SaoTome-And-Principe(38),
africa-Senegal(39),
africa-SierraLeone(40),
africa-Somalia(41),
africa-SouthAfrica(42),
africa-Spain-Mainland(43),
africa-Spain-CeutaMelilla(44),
africa-Spain-CanaryIslands(45),
africa-Sudan(46),
africa-Swaziland(47),
africa-Tanzania(48),
africa-Togo(49),
africa-Tunisia(50),
africa-Uganda(51),
africa-Western-Sahara(52),
africa-Zambia(53),
africa-Zimbabwe(54),
americas-Anguilla(55),
americas-Antigua-Barbuda(56),
americas-Argentina-EArgentina(57),
americas-Argentina-MostLocations(58),
americas-Argentina-Jujuy(59),
americas-Argentina-Catamarca(60),
americas-Argentina-Mendoza(61),
americas-Aruba(62),
americas-Bahamas(63),
americas-Barbados(64),
americas-Belize(65),
americas-Bolivia(66),
americas-Brazil-AtlanticIslands(67),
americas-Brazil-AmapaEPara(68),
americas-Brazil-NEBrazil(69),
americas-Brazil-Pernambuco(70),
americas-Brazil-Tocantins(71),
americas-Brazil-AlagoasSergipe(72),
americas-Brazil-SSEBrazil(73),
americas-Brazil-MatoGrossoDoSul(74),
americas-Brazil-WParaRondonia(75),
americas-Brazil-Roraima(76),
americas-Brazil-EAmazonas(77),
americas-Brazil-WAmazonas(78),
americas-Brazil-Acre(79),
americas-Canada-NewfoundlandIsland(80),
americas-Canada-AtlanTime-NovaScotia(81),
americas-Canada-AtlanTime-ELabrador(82),
americas-Canada-EastTime-OntarioMostlocation(83),
americas-Canada-EastTime-ThunderBay(84),
americas-Canada-EastStdTime-PangnirtungNunavut(85),
americas-Canada-EastStdTime-EastNunavut(86),
americas-Canada-EastStdTime-CenNunavut(87),
americas-Canada-CenTime-ManitobaWestOntario(88),
americas-Canada-CenTime-RainyRiver(89),
americas-Canada-CenTime-WestNunavut(90),
americas-Canada-CenStdTime-SaskatchewanMostlocation(91),
americas-Canada-CenStdTime-SaskatchewanMidwest(92),
americas-Canada-MountTime-AlbertaEastBritishColumbia(93),
americas-Canada-MountTime-CentralNorthwestTerritories(94),
americas-Canada-MountTime-WestNorthwestTerritories(95),
americas-Canada-MountStdTime-DawsonCrkStJohnBritColumbia(96),
americas-Canada-PacificTime-WestBritishColumbia(97),
americas-Canada-PacificTime-SouthYukon(98),
americas-Canada-PacificTime-NorthYukon(99),
americas-CaymanIslands(100),
americas-Chile-MostLocation(101),
americas-Chile-EasterIsland(102),
americas-Colombia(103),
americas-CostaRica(104),
americas-Cuba(105),
americas-Dominica(106),
americas-DominicanRepublic (107),
americas-Ecuador(108),
americas-ElSalvado(109),
americas-FrenchGuiana(110),
americas-Greenland-MostLocation(111),
americas-Greenland-EastCoastNorthScoresbysund(112),
americas-Greenland-ScoresbysundIttoqqortoormiit(113),
americas-Greenland-ThulePituffik(114),
americas-Grenada(115),
americas-Guadeloupe(116),
americas-Guatemala(117),
americas-Guyana(118),
americas-Haiti(119),
americas-Honduras(120),
americas-Jamaica(121),
americas-Martinique(122),
americas-Mexico-CentTime-Mostlocations(123),
americas-Mexico-CentTime-QuintanaRoo(124),
americas-Mexico-CentTime-CampecheYucatan(125),
americas-Mexico-CentTime-CoahuilaDurNuevoLeonTam(126),
americas-Mexico-MountTime-SBajaNayaritSinaloa(127),
americas-Mexico-MountTime-Chihuahua(128),
americas-Mexico-MountStdTime-Sonora(129),
americas-Mexico-PacificTime(130),
americas-Montserrat(131),
americas-NetherlandsAntilles(132),
americas-Nicaragua(133),
americas-Panama(134),
americas-Paraguay(135),
americas-Peru(136),
americas-PuertoRico(137),
americas-StKittsAndNevis(138),
americas-StLucia(139),
americas-StPierreAndMiquelon(140),
americas-StVincent(141),
americas-Suriname(142),
americas-TrinidadAndTobago(143),
americas-TurksAndCaicosIs(144),
americas-USA-EastTime(145),
americas-USA-EastTime-MichiganMostLocation(146),
americas-USA-EastTime-KentuckyLouisvilleArea(147),
americas-USA-EastTime-KentuckyWayneCounty(148),
americas-USA-EastStdTime-IndianaMostLocations(149),
americas-USA-EastStdTime-IndianaCrawfordCounty(150),
americas-USA-EastStdTime-IndianaStarkeCounty(151),
americas-USA-EastStdTime-IndianaSwitzerlandCounty(152),
americas-USA-CentTime(153),
americas-USA-CentTime-MichiganWisconsinborder(154),
americas-USA-CentTime-NorthDakotaOliverCounty(155),
americas-USA-MountTime(156),
americas-USA-MountTime-SouthIdahoAndEastOregon(157),
americas-USA-MountTime-Navajo(158),
americas-USA-MountStdTime-Arizona(159),
americas-USA-PacificTime(160),
americas-USA-AlaskaTime(161),
americas-USA-AlaskaTime-AlaskaPanhandle(162),
americas-USA-AlaskaTime-AlaskaPanhandleNeck(163),
americas-USA-AlaskaTime-WestAlaska(164),
americas-USA-AleutianIslands(165),
americas-USA-Hawaii(166),
americas-Uruguay(167),
americas-Venezuela(168),
americas-VirginIslands-UK(169),
americas-VirginIslands-US(170),
antarctica-McMurdoStationRossIsland(171),
antarctica-Amundsen-ScottStationSouthPole(172),
antarctica-PalmerStationAnversIsland(173),
antarctica-MawsonStationHolmeBay(174),
antarctica-DavisStationVestfoldHills(175),
antarctica-CaseyStationBaileyPeninsula(176),
antarctica-VostokStationSMagneticPole(177),
antarctica-Dumont-dUrvilleBaseTerreAdelie(178),
antarctica-SyowaStationEOngulI(179),
arcticOcean-Svalbard(180),
arcticOcean-JanMayen(181),
asia-Afghanistan(182),
asia-Armenia(183),
asia-Azerbaijan(184),
asia-Bahrain(185),
asia-Bangladesh(186),
asia-Bhutan(187),
asia-Brunei(188),
asia-Cambodia(189),
asia-China-EastChinaBeijingGuangdongShanghai(190),
asia-China-Heilongjiang(191),
asia-China-CentralChinaGansuGuizhouSichuanYunnan(192),
asia-China-TibetmostofXinjiangUyghur(193),
asia-China-SouthwestXinjiangUyghur(194),
asia-Cyprus(195),
asia-EastTimor(196),
asia-Georgia(197),
asia-HongKong(198),
asia-India(199),
asia-Indonesia-JavaAndSumatra(200),
asia-Indonesia-WestCentralBorneo(201),
asia-Indonesia-ESBorneoCelebesBaliNusaTengaWTimor(202),
asia-Indonesia-IrianJayaAndMoluccas(203),
asia-Iran(204),
asia-Iraq(205),
asia-Israel(206),
asia-Japan(207),
asia-Jordan(208),
asia-Kazakhstan-MostLocations(209),
asia-Kazakhstan-QyzylordaKyzylorda(210),
asia-Kazakhstan-Aqtobe(211),
asia-Kazakhstan-AtyrauMangghystau(212),
asia-Kazakhstan-WestKazakhstan(213),
asia-Korea-North(214),
asia-Korea-South(215),
asia-Kuwait(216),
asia-Kyrgyzstan(217),
asia-Laos(218),
asia-Lebanon(219),
asia-Macau(220),
asia-Malaysia-PeninsularMalaysia(221),
asia-Malaysia-SabahSarawak(222),
asia-Mongolia-MostLocations(223),
asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224),
asia-Mongolia-DornodSukhbaatar(225),
asia-Myanmar(226),
asia-Nepal(227),
asia-Oman(228),
asia-Pakistan(229),
asia-Palestine(230),
asia-Philippines(231),
asia-Qatar(232),
asia-Russia-Moscow-01Kaliningrad(233),
asia-Russia-Moscow00WestRussia(234),
asia-Russia-Moscow01CaspianSea(235),
asia-Russia-Moscow02Urals(236),
asia-Russia-Moscow03WestSiberia(237),
asia-Russia-Moscow03Novosibirsk(238),
asia-Russia-Moscow04YeniseiRiver(239),
asia-Russia-Moscow05LakeBaikal(240),
asia-Russia-Moscow06LenaRiver(241),
asia-Russia-Moscow07AmurRiver(242),
asia-Russia-Moscow07SakhalinIsland(243),
asia-Russia-Moscow08Magadan(244),
asia-Russia-Moscow09Kamchatka(245),
asia-Russia-Moscow10BeringSea(246),
asia-SaudiArabia(247),
asia-Singapore(248),
asia-SriLanka(249),
asia-Syria(250),
asia-Taiwan(251),
asia-Tajikistan(252),
asia-Thailand(253),
asia-Turkmenistan(254),
asia-UnitedArabEmirates(255),
asia-Uzbekistan-WestUzbekistan(256),
asia-Uzbekistan-EastUzbekistan(257),
asia-Vietnam(258),
asia-Yemen(259),
atlanticOcean-Bermuda(260),
atlanticOcean-CapeVerde(261),
atlanticOcean-FaeroeIslands(262),
atlanticOcean-FalklandIslands(263),
atlanticOcean-Iceland(264),
atlanticOcean-Portugal-Mainland(265),
atlanticOcean-Portugal-MadeiraIslands(266),
atlanticOcean-Portugal-Azores(267),
atlanticOcean-SouthGeorgia-SouthSandwichIslands(268),
atlanticOcean-Spain-Mainland(269),
atlanticOcean-Spain-CeutaMelilla(270),
atlanticOcean-Spain-CanaryIslands(271),
atlanticOcean-StHelena(272),
atlanticOcean-Svalbard-JanMayen(273),
australia-LordHoweIsland(274),
australia-Tasmania(275),
australia-Victoria(276),
australia-NewSouthWales-MostLocations(277),
australia-NewSouthWales-Yancowinna(278),
australia-Queensland-MostLocations(279),
australia-Queensland-HolidayIslands(280),
australia-SouthAustralia(281),
australia-NorthernTerritory(282),
australia-WesternAustralia(283),
europe-Albania(284),
europe-Andorra(285),
europe-Austria(286),
europe-Belarus(287),
europe-Belgium(288),
europe-BosniaHerzegovina(289),
europe-Britain-UKGreatBritain(290),
europe-Britain-UKNorthernIreland(291),
europe-Bulgaria(292),
europe-Croatia(293),
europe-CzechRepublic(294),
europe-Denmark(295),
europe-Estonia(296),
europe-Finland(297),
europe-France(298),
europe-Germany(299),
europe-Gibraltar(300),
europe-Greece(301),
europe-Hungary(302),
europe-Ireland(303),
europe-Italy(304),
europe-Latvia(305),
europe-Liechtenstein(306),
europe-Lithuania(307),
europe-Luxembourg(308),
europe-Macedonia(309),
europe-Malta(310),
europe-Moldova(311),
europe-Monaco(312),
europe-Montenegro(421),
europe-Netherlands(313),
europe-Norway(314),
europe-Poland(315),
europe-Portugal-Mainland(316),
europe-Portugal-MadeiraIslands(317),
europe-Portugal-Azores(318),
europe-Romania(319),
europe-Russia-Moscow-01Kaliningrad(320),
europe-Russia-Moscow00WestRussia(321),
europe-Russia-Moscow01CaspianSea(322),
europe-Russia-Moscow02Urals(323),
europe-Russia-Moscow03WestSiberia(324),
europe-Russia-Moscow03Novosibirsk(325),
europe-Russia-Moscow04YeniseiRiver(326),
europe-Russia-Moscow05LakeBaikal(327),
europe-Russia-Moscow06LenaRiver(328),
europe-Russia-Moscow07AmurRiver(329),
europe-Russia-Moscow07SakhalinIsland(330),
europe-Russia-Moscow08Magadan(331),
europe-Russia-Moscow09Kamchatka(332),
europe-Russia-Moscow10BeringSea(333),
europe-SanMarino(334),
europe-Serbia(348),
europe-Slovakia(335),
europe-Slovenia(336),
europe-Spain-Mainland(337),
europe-Spain-CeutaAndMelilla(338),
europe-Spain-CanaryIslands(339),
europe-Sweden(340),
europe-Switzerland(341),
europe-Turkey(342),
europe-Ukraine-MostLocations(343),
europe-Ukraine-Ruthenia(344),
europe-Ukraine-Zaporozhye-ELugansk(345),
europe-Ukraine-CentralCrimea(346),
europe-VaticanCity(347),
indianOcean-BritishIndianOceanTerritory(349),
indianOcean-ChristmasIsland(350),
indianOcean-CocosOrKeelingIslands(351),
indianOcean-Comoros(352),
indianOcean-FrenchSouthernAndAntarcticLands(353),
indianOcean-Madagascar(354),
indianOcean-Maldives(355),
indianOcean-Mauritius(356),
indianOcean-Mayotte(357),
indianOcean-Reunion(358),
indianOcean-Seychelles(359),
pacificOcean-Chile-MostLocations(360),
pacificOcean-Chile-EasterIslandSalayGomez(361),
pacificOcean-CookIslands(362),
pacificOcean-Ecuador(363),
pacificOcean-Fiji(364),
pacificOcean-FrenchPolynesia-SocietyIslands(365),
pacificOcean-FrenchPolynesia-MarquesasIslands(366),
pacificOcean-FrenchPolynesia-GambierIslands(367),
pacificOcean-Guam(368),
pacificOcean-Kiribati-GilbertIslands(369),
pacificOcean-Kiribati-PhoenixIslands(370),
pacificOcean-Kiribati-LineIslands(371),
pacificOcean-MarshallIslands-MostLocations(372),
pacificOcean-MarshallIslands-Kwajalein(373),
pacificOcean-Micronesia-Yap(374),
pacificOcean-Micronesia-TrukOrChuuk(375),
pacificOcean-Micronesia-PonapeOrPohnpei(376),
pacificOcean-Micronesia-Kosrae(377),
pacificOcean-Nauru(378),
pacificOcean-NewCaledonia(379),
pacificOcean-NewZealand-MostLocations(380),
pacificOcean-NewZealand-ChathamIslands(381),
pacificOcean-Niue(382),
pacificOcean-NorfolkIsland(383),
pacificOcean-NorthernMarianaIslands(384),
pacificOcean-Palau(385),
pacificOcean-PapuaNewGuinea(386),
pacificOcean-Pitcairn(387),
pacificOcean-SamoaAmerican(388),
pacificOcean-SamoaWestern(389),
pacificOcean-SolomonIslands(390),
pacificOcean-Tokelau(391),
pacificOcean-Tonga(392),
pacificOcean-Tuvalu(393),
pacificOceanUSA-EastTime(394),
pacificOceanUSA-EastTime-MichiganMostLocations(395),
pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396),
pacificOceanUSA-EastTime-KentuckyWayneCounty(397),
pacificOceanUSA-EastStdTime-IndianaMostLocations(398),
pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399),
pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400),
pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401),
pacificOceanUSA-CentTime(402),
pacificOceanUSA-CentTime-MichiganWisconsinborder(403),
pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404),
pacificOceanUSA-MountTime(405),
pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406),
pacificOceanUSA-MountTime-Navajo(407),
pacificOceanUSA-MountStdTime-Arizona(408),
pacificOceanUSA-PacificTime(409),
pacificOceanUSA-AlaskaTime(410),
pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411),
pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412),
pacificOceanUSA-AlaskaTime-WestAlaska(413),
pacificOceanUSA-AleutianIslands(414),
pacificOceanUSA-Hawaii(415),
pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416),
pacificOcean-USMinorOutlyingIslands-MidwayIslands(417),
pacificOcean-USMinorOutlyingIslands-WakeIsland(418),
pacificOcean-Vanuatu(419),
pacificOcean-WallisAndFutuna(420)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time zone.
Note: Locations are alphabetically ordered and
the corresponding code is not reflected in CLI."
::= { agSystem 55 }
agNewTimeZone OBJECT-TYPE
SYNTAX INTEGER {
none(0),
africa-Algeria(1),
africa-Angola(2),
africa-Benin(3),
africa-Botswana(4),
africa-Burkina-Faso(5),
africa-Burundi(6),
africa-Cameroon(7),
africa-Central-African-Rep(8),
africa-Chad(9),
africa-Congo-WestDemRepCongo(10),
africa-Congo-EastDemRepCongo(11),
africa-Congo-Rep(12),
africa-Cote-dIvoire(13),
africa-Djibouti(14),
africa-Egypt(15),
africa-Equatorial-Guinea(16),
africa-Eritrea(17),
africa-Ethiopia(18),
africa-Gabon(19),
africa-Gambia(20),
africa-Ghana(21),
africa-Guinea(22),
africa-Guinea-Bissau(23),
africa-Kenya(24),
africa-Lesotho(25),
africa-Liberia(26),
africa-Libya(27),
africa-Malawi(28),
africa-Mali-SouthWestMali(29),
africa-Mali-NorthEastMali(30),
africa-Mauritania(31),
africa-Morocco(32),
africa-Mozambique(33),
africa-Namibia(34),
africa-Niger(35),
africa-Nigeria(36),
africa-Rwanda(37),
africa-SaoTome-And-Principe(38),
africa-Senegal(39),
africa-SierraLeone(40),
africa-Somalia(41),
africa-SouthAfrica(42),
africa-Spain-Mainland(43),
africa-Spain-CeutaMelilla(44),
africa-Spain-CanaryIslands(45),
africa-Sudan(46),
africa-Swaziland(47),
africa-Tanzania(48),
africa-Togo(49),
africa-Tunisia(50),
africa-Uganda(51),
africa-Western-Sahara(52),
africa-Zambia(53),
africa-Zimbabwe(54),
americas-Anguilla(55),
americas-Antigua-Barbuda(56),
americas-Argentina-EArgentina(57),
americas-Argentina-MostLocations(58),
americas-Argentina-Jujuy(59),
americas-Argentina-Catamarca(60),
americas-Argentina-Mendoza(61),
americas-Aruba(62),
americas-Bahamas(63),
americas-Barbados(64),
americas-Belize(65),
americas-Bolivia(66),
americas-Brazil-AtlanticIslands(67),
americas-Brazil-AmapaEPara(68),
americas-Brazil-NEBrazil(69),
americas-Brazil-Pernambuco(70),
americas-Brazil-Tocantins(71),
americas-Brazil-AlagoasSergipe(72),
americas-Brazil-SSEBrazil(73),
americas-Brazil-MatoGrossoDoSul(74),
americas-Brazil-WParaRondonia(75),
americas-Brazil-Roraima(76),
americas-Brazil-EAmazonas(77),
americas-Brazil-WAmazonas(78),
americas-Brazil-Acre(79),
americas-Canada-NewfoundlandIsland(80),
americas-Canada-AtlanTime-NovaScotia(81),
americas-Canada-AtlanTime-ELabrador(82),
americas-Canada-EastTime-OntarioMostlocation(83),
americas-Canada-EastTime-ThunderBay(84),
americas-Canada-EastStdTime-PangnirtungNunavut(85),
americas-Canada-EastStdTime-EastNunavut(86),
americas-Canada-EastStdTime-CenNunavut(87),
americas-Canada-CenTime-ManitobaWestOntario(88),
americas-Canada-CenTime-RainyRiver(89),
americas-Canada-CenTime-WestNunavut(90),
americas-Canada-CenStdTime-SaskatchewanMostlocation(91),
americas-Canada-CenStdTime-SaskatchewanMidwest(92),
americas-Canada-MountTime-AlbertaEastBritishColumbia(93),
americas-Canada-MountTime-CentralNorthwestTerritories(94),
americas-Canada-MountTime-WestNorthwestTerritories(95),
americas-Canada-MountStdTime-DawsonCrkStJohnBritColumbia(96),
americas-Canada-PacificTime-WestBritishColumbia(97),
americas-Canada-PacificTime-SouthYukon(98),
americas-Canada-PacificTime-NorthYukon(99),
americas-CaymanIslands(100),
americas-Chile-MostLocation(101),
americas-Chile-EasterIsland(102),
americas-Colombia(103),
americas-CostaRica(104),
americas-Cuba(105),
americas-Dominica(106),
americas-DominicanRepublic (107),
americas-Ecuador(108),
americas-ElSalvado(109),
americas-FrenchGuiana(110),
americas-Greenland-MostLocation(111),
americas-Greenland-EastCoastNorthScoresbysund(112),
americas-Greenland-ScoresbysundIttoqqortoormiit(113),
americas-Greenland-ThulePituffik(114),
americas-Grenada(115),
americas-Guadeloupe(116),
americas-Guatemala(117),
americas-Guyana(118),
americas-Haiti(119),
americas-Honduras(120),
americas-Jamaica(121),
americas-Martinique(122),
americas-Mexico-CentTime-Mostlocations(123),
americas-Mexico-CentTime-QuintanaRoo(124),
americas-Mexico-CentTime-CampecheYucatan(125),
americas-Mexico-CentTime-CoahuilaDurNuevoLeonTam(126),
americas-Mexico-MountTime-SBajaNayaritSinaloa(127),
americas-Mexico-MountTime-Chihuahua(128),
americas-Mexico-MountStdTime-Sonora(129),
americas-Mexico-PacificTime(130),
americas-Montserrat(131),
americas-NetherlandsAntilles(132),
americas-Nicaragua(133),
americas-Panama(134),
americas-Paraguay(135),
americas-Peru(136),
americas-PuertoRico(137),
americas-StKittsAndNevis(138),
americas-StLucia(139),
americas-StPierreAndMiquelon(140),
americas-StVincent(141),
americas-Suriname(142),
americas-TrinidadAndTobago(143),
americas-TurksAndCaicosIs(144),
americas-USA-EastTime(145),
americas-USA-EastTime-MichiganMostLocation(146),
americas-USA-EastTime-KentuckyLouisvilleArea(147),
americas-USA-EastTime-KentuckyWayneCounty(148),
americas-USA-EastStdTime-IndianaMostLocations(149),
americas-USA-EastStdTime-IndianaCrawfordCounty(150),
americas-USA-EastStdTime-IndianaStarkeCounty(151),
americas-USA-EastStdTime-IndianaSwitzerlandCounty(152),
americas-USA-CentTime(153),
americas-USA-CentTime-MichiganWisconsinborder(154),
americas-USA-CentTime-NorthDakotaOliverCounty(155),
americas-USA-MountTime(156),
americas-USA-MountTime-SouthIdahoAndEastOregon(157),
americas-USA-MountTime-Navajo(158),
americas-USA-MountStdTime-Arizona(159),
americas-USA-PacificTime(160),
americas-USA-AlaskaTime(161),
americas-USA-AlaskaTime-AlaskaPanhandle(162),
americas-USA-AlaskaTime-AlaskaPanhandleNeck(163),
americas-USA-AlaskaTime-WestAlaska(164),
americas-USA-AleutianIslands(165),
americas-USA-Hawaii(166),
americas-Uruguay(167),
americas-Venezuela(168),
americas-VirginIslands-UK(169),
americas-VirginIslands-US(170),
antarctica-McMurdoStationRossIsland(171),
antarctica-Amundsen-ScottStationSouthPole(172),
antarctica-PalmerStationAnversIsland(173),
antarctica-MawsonStationHolmeBay(174),
antarctica-DavisStationVestfoldHills(175),
antarctica-CaseyStationBaileyPeninsula(176),
antarctica-VostokStationSMagneticPole(177),
antarctica-Dumont-dUrvilleBaseTerreAdelie(178),
antarctica-SyowaStationEOngulI(179),
arcticOcean-Svalbard(180),
arcticOcean-JanMayen(181),
asia-Afghanistan(182),
asia-Armenia(183),
asia-Azerbaijan(184),
asia-Bahrain(185),
asia-Bangladesh(186),
asia-Bhutan(187),
asia-Brunei(188),
asia-Cambodia(189),
asia-China-EastChinaBeijingGuangdongShanghai(190),
asia-China-Heilongjiang(191),
asia-China-CentralChinaGansuGuizhouSichuanYunnan(192),
asia-China-TibetmostofXinjiangUyghur(193),
asia-China-SouthwestXinjiangUyghur(194),
asia-Cyprus(195),
asia-EastTimor(196),
asia-Georgia(197),
asia-HongKong(198),
asia-India(199),
asia-Indonesia-JavaAndSumatra(200),
asia-Indonesia-WestCentralBorneo(201),
asia-Indonesia-ESBorneoCelebesBaliNusaTengaWTimor(202),
asia-Indonesia-IrianJayaAndMoluccas(203),
asia-Iran(204),
asia-Iraq(205),
asia-Israel(206),
asia-Japan(207),
asia-Jordan(208),
asia-Kazakhstan-MostLocations(209),
asia-Kazakhstan-QyzylordaKyzylorda(210),
asia-Kazakhstan-Aqtobe(211),
asia-Kazakhstan-AtyrauMangghystau(212),
asia-Kazakhstan-WestKazakhstan(213),
asia-Korea-North(214),
asia-Korea-South(215),
asia-Kuwait(216),
asia-Kyrgyzstan(217),
asia-Laos(218),
asia-Lebanon(219),
asia-Macau(220),
asia-Malaysia-PeninsularMalaysia(221),
asia-Malaysia-SabahSarawak(222),
asia-Mongolia-MostLocations(223),
asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224),
asia-Mongolia-DornodSukhbaatar(225),
asia-Myanmar(226),
asia-Nepal(227),
asia-Oman(228),
asia-Pakistan(229),
asia-Palestine(230),
asia-Philippines(231),
asia-Qatar(232),
asia-Russia-Moscow-01Kaliningrad(233),
asia-Russia-Moscow00WestRussia(234),
asia-Russia-Moscow01CaspianSea(235),
asia-Russia-Moscow02Urals(236),
asia-Russia-Moscow03WestSiberia(237),
asia-Russia-Moscow03Novosibirsk(238),
asia-Russia-Moscow04YeniseiRiver(239),
asia-Russia-Moscow05LakeBaikal(240),
asia-Russia-Moscow06LenaRiver(241),
asia-Russia-Moscow07AmurRiver(242),
asia-Russia-Moscow07SakhalinIsland(243),
asia-Russia-Moscow08Magadan(244),
asia-Russia-Moscow09Kamchatka(245),
asia-Russia-Moscow10BeringSea(246),
asia-SaudiArabia(247),
asia-Singapore(248),
asia-SriLanka(249),
asia-Syria(250),
asia-Taiwan(251),
asia-Tajikistan(252),
asia-Thailand(253),
asia-Turkmenistan(254),
asia-UnitedArabEmirates(255),
asia-Uzbekistan-WestUzbekistan(256),
asia-Uzbekistan-EastUzbekistan(257),
asia-Vietnam(258),
asia-Yemen(259),
atlanticOcean-Bermuda(260),
atlanticOcean-CapeVerde(261),
atlanticOcean-FaeroeIslands(262),
atlanticOcean-FalklandIslands(263),
atlanticOcean-Iceland(264),
atlanticOcean-Portugal-Mainland(265),
atlanticOcean-Portugal-MadeiraIslands(266),
atlanticOcean-Portugal-Azores(267),
atlanticOcean-SouthGeorgia-SouthSandwichIslands(268),
atlanticOcean-Spain-Mainland(269),
atlanticOcean-Spain-CeutaMelilla(270),
atlanticOcean-Spain-CanaryIslands(271),
atlanticOcean-StHelena(272),
atlanticOcean-Svalbard-JanMayen(273),
australia-LordHoweIsland(274),
australia-Tasmania(275),
australia-Victoria(276),
australia-NewSouthWales-MostLocations(277),
australia-NewSouthWales-Yancowinna(278),
australia-Queensland-MostLocations(279),
australia-Queensland-HolidayIslands(280),
australia-SouthAustralia(281),
australia-NorthernTerritory(282),
australia-WesternAustralia(283),
europe-Albania(284),
europe-Andorra(285),
europe-Austria(286),
europe-Belarus(287),
europe-Belgium(288),
europe-BosniaHerzegovina(289),
europe-Britain-UKGreatBritain(290),
europe-Britain-UKNorthernIreland(291),
europe-Bulgaria(292),
europe-Croatia(293),
europe-CzechRepublic(294),
europe-Denmark(295),
europe-Estonia(296),
europe-Finland(297),
europe-France(298),
europe-Germany(299),
europe-Gibraltar(300),
europe-Greece(301),
europe-Hungary(302),
europe-Ireland(303),
europe-Italy(304),
europe-Latvia(305),
europe-Liechtenstein(306),
europe-Lithuania(307),
europe-Luxembourg(308),
europe-Macedonia(309),
europe-Malta(310),
europe-Moldova(311),
europe-Monaco(312),
europe-Montenegro(421),
europe-Netherlands(313),
europe-Norway(314),
europe-Poland(315),
europe-Portugal-Mainland(316),
europe-Portugal-MadeiraIslands(317),
europe-Portugal-Azores(318),
europe-Romania(319),
europe-Russia-Moscow-01Kaliningrad(320),
europe-Russia-Moscow00WestRussia(321),
europe-Russia-Moscow01CaspianSea(322),
europe-Russia-Moscow02Urals(323),
europe-Russia-Moscow03WestSiberia(324),
europe-Russia-Moscow03Novosibirsk(325),
europe-Russia-Moscow04YeniseiRiver(326),
europe-Russia-Moscow05LakeBaikal(327),
europe-Russia-Moscow06LenaRiver(328),
europe-Russia-Moscow07AmurRiver(329),
europe-Russia-Moscow07SakhalinIsland(330),
europe-Russia-Moscow08Magadan(331),
europe-Russia-Moscow09Kamchatka(332),
europe-Russia-Moscow10BeringSea(333),
europe-SanMarino(334),
europe-Serbia(348),
europe-Slovakia(335),
europe-Slovenia(336),
europe-Spain-Mainland(337),
europe-Spain-CeutaAndMelilla(338),
europe-Spain-CanaryIslands(339),
europe-Sweden(340),
europe-Switzerland(341),
europe-Turkey(342),
europe-Ukraine-MostLocations(343),
europe-Ukraine-Ruthenia(344),
europe-Ukraine-Zaporozhye-ELugansk(345),
europe-Ukraine-CentralCrimea(346),
europe-VaticanCity(347),
indianOcean-BritishIndianOceanTerritory(349),
indianOcean-ChristmasIsland(350),
indianOcean-CocosOrKeelingIslands(351),
indianOcean-Comoros(352),
indianOcean-FrenchSouthernAndAntarcticLands(353),
indianOcean-Madagascar(354),
indianOcean-Maldives(355),
indianOcean-Mauritius(356),
indianOcean-Mayotte(357),
indianOcean-Reunion(358),
indianOcean-Seychelles(359),
pacificOcean-Chile-MostLocations(360),
pacificOcean-Chile-EasterIslandSalayGomez(361),
pacificOcean-CookIslands(362),
pacificOcean-Ecuador(363),
pacificOcean-Fiji(364),
pacificOcean-FrenchPolynesia-SocietyIslands(365),
pacificOcean-FrenchPolynesia-MarquesasIslands(366),
pacificOcean-FrenchPolynesia-GambierIslands(367),
pacificOcean-Guam(368),
pacificOcean-Kiribati-GilbertIslands(369),
pacificOcean-Kiribati-PhoenixIslands(370),
pacificOcean-Kiribati-LineIslands(371),
pacificOcean-MarshallIslands-MostLocations(372),
pacificOcean-MarshallIslands-Kwajalein(373),
pacificOcean-Micronesia-Yap(374),
pacificOcean-Micronesia-TrukOrChuuk(375),
pacificOcean-Micronesia-PonapeOrPohnpei(376),
pacificOcean-Micronesia-Kosrae(377),
pacificOcean-Nauru(378),
pacificOcean-NewCaledonia(379),
pacificOcean-NewZealand-MostLocations(380),
pacificOcean-NewZealand-ChathamIslands(381),
pacificOcean-Niue(382),
pacificOcean-NorfolkIsland(383),
pacificOcean-NorthernMarianaIslands(384),
pacificOcean-Palau(385),
pacificOcean-PapuaNewGuinea(386),
pacificOcean-Pitcairn(387),
pacificOcean-SamoaAmerican(388),
pacificOcean-SamoaWestern(389),
pacificOcean-SolomonIslands(390),
pacificOcean-Tokelau(391),
pacificOcean-Tonga(392),
pacificOcean-Tuvalu(393),
pacificOceanUSA-EastTime(394),
pacificOceanUSA-EastTime-MichiganMostLocations(395),
pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396),
pacificOceanUSA-EastTime-KentuckyWayneCounty(397),
pacificOceanUSA-EastStdTime-IndianaMostLocations(398),
pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399),
pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400),
pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401),
pacificOceanUSA-CentTime(402),
pacificOceanUSA-CentTime-MichiganWisconsinborder(403),
pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404),
pacificOceanUSA-MountTime(405),
pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406),
pacificOceanUSA-MountTime-Navajo(407),
pacificOceanUSA-MountStdTime-Arizona(408),
pacificOceanUSA-PacificTime(409),
pacificOceanUSA-AlaskaTime(410),
pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411),
pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412),
pacificOceanUSA-AlaskaTime-WestAlaska(413),
pacificOceanUSA-AleutianIslands(414),
pacificOceanUSA-Hawaii(415),
pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416),
pacificOcean-USMinorOutlyingIslands-MidwayIslands(417),
pacificOcean-USMinorOutlyingIslands-WakeIsland(418),
pacificOcean-Vanuatu(419),
pacificOceanWallisAndFutuna(420)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time zone.
Note: Locations are alphabetically ordered and
the corresponding code is not reflected in CLI."
::= { agSystem 56 }
agCurCfgIdleCLITimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set idle CLI sessions timeout."
::= { agSystem 57 }
agNewCfgIdleCLITimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set idle CLI sessions timeout."
::= { agSystem 58 }
-- Auto-Discovery topology table info
agCurCfgHttpsServerAccess OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current HTTPS server access state."
::= { agSystem 62 }
agNewCfgHttpsServerAccess OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable HTTPS server access."
::= { agSystem 63 }
agCurHttpAcces OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current HTTP server access state."
::= { agSystem 66 }
agNewHttpAcces OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New HTTP server access state."
::= { agSystem 67 }
agCurCfgDhcp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of DHCP, as currently configured in the
current configuration block."
::= { agSystem 68 }
agNewCfgDhcp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of DHCP, in the new configuration block."
::= { agSystem 69 }
agCurCfgReminders OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of reminders feature."
::= { agSystem 70 }
agNewCfgReminders OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable reminders feature."
::= { agSystem 71 }
agCurCfgHprompt OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of hprompt."
::= { agSystem 72 }
agNewCfgHprompt OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of hprompt."
::= { agSystem 73 }
agCurCfgUserBBI OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of user configuration from BBI."
::= { agSystem 74 }
agNewCfgUserBBI OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of user configuration from BBI."
::= { agSystem 75 }
agCurCfgSysCustomDstState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of Custom DST"
::= { agSystem 98 }
agNewCfgSysCustomDstState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Custom DST"
::= { agSystem 99 }
agCurCfgSysCustomDstStart OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current Custom DST start rule"
::= { agSystem 100 }
agNewCfgSysCustomDstStart OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Custom DST start rule"
::= { agSystem 101 }
agCurCfgSysCustomDstEnd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Custom DST end rule"
::= { agSystem 102}
agNewCfgSysCustomDstEnd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Custom DST end rule"
::= { agSystem 103 }
agHavePanicDump OBJECT-TYPE
SYNTAX INTEGER {
havePanic(1),
noHavePanic(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The presence of a panic dump in the flash memory."
::= { agSystem 104 }
agCurCfgResetControl OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current reset control state."
::= { agSystem 111 }
agNewCfgResetControl OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable reset control after panic."
::= { agSystem 112 }
agCurCfgSysDlight OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current daylight savings time status."
::= { agSystem 113 }
agNewCfgSysDlight OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable daylight savings time."
::= { agSystem 114 }
agCurCfgErrDisableRecovery OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the system will automatically
re-enable an error-disabled port after the time interval
indicated by agCurCfgErrDisableTimeout has elapsed. A port
is in error-disabled state when it has been operationally
disabled due to abnormal conditions detected on the port.
An error-disabled port will only be automatically re-enabled
by the system if and only if this object and the port's
agPortCurCfgErrDisableRecovery object both have a value of
'enable(1)'."
DEFVAL { disable }
::= { agSystem 115 }
agNewCfgErrDisableRecovery OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system should automatically
re-enable an error-disabled port. Use this object to change
the global setting of the error-disable recovery action."
DEFVAL { disable }
::= { agSystem 116 }
agCurCfgErrDisableTimeout OBJECT-TYPE
SYNTAX INTEGER (30 .. 86400)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the time, in seconds, that the system
will wait before it automatically re-enables any port that
is in error-disabled state."
DEFVAL { 300 }
::= { agSystem 117 }
agNewCfgErrDisableTimeout OBJECT-TYPE
SYNTAX INTEGER (30 .. 86400)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the time, in seconds, that the system
should wait before it automatically re-enables a port that
is in error-disabled state. Use this object to change the
global error-disable timeout value."
DEFVAL { 300 }
::= { agSystem 118 }
agCurCfgTelnetAccess OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current telnet access state."
::= { agSystem 119 }
agNewCfgTelnetAccess OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable telnet access."
::= { agSystem 120 }
agNetboot OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ena/dis loading of config over n/w during bootup"
::= { agSystem 133 }
agNetbootTftpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tftp server address from where config file needs to be downloaded"
::= { agSystem 134 }
agNetbootCfgFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Config file location on tftp server"
::= { agSystem 135 }
agCurCfgLinkscanMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
fast(2),
slow(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set linkscan mode"
::= { agSystem 136 }
agNewCfgLinkscanMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
fast(2),
slow(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set linkscan mode"
::= { agSystem 137 }
agUSBboot OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ena/dis USB Boot capability"
::= { agSystem 138 }
agCurServiceLED OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ena/dis Service Required LED"
::= { agSystem 139 }
agNewServiceLED OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ena/dis Service Required LED "
::= { agSystem 140 }
agUSBeject OBJECT-TYPE
SYNTAX INTEGER {
eject(1),
usbready(2),
nousb(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Eject USB - eject(1)
Get current USB state:
usbready(2) - USB mounted
nousb(3) - no USB mounted"
::= { agSystem 141 }
agCurRFC4741NetconfAccess OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current NETCONF server access state."
::= { agSystem 142 }
agNewRFC4741NetconfAccess OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable NETCONF server access state."
::= { agSystem 143 }
agCurRFC4741NetconfSessionTimeout OBJECT-TYPE
SYNTAX INTEGER (30..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Once NETCONF session setup, NETCONF server will allocate resource
for this session.
agCurRFC4741NetconfSessionTimeout indicates the number of seconds before
the resources are freed if there is no operation on this session"
::= { agSystem 144 }
agNewRFC4741NetconfSessionTimeout OBJECT-TYPE
SYNTAX INTEGER (30..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Once NETCONF session setup, NETCONF server will allocate resource
for this session.
agNewRFC4741NetconfSessionTimeout specifies the number of seconds before
the resources are freed if there is no operation on this session"
::= { agSystem 145 }
agCurRFC4741NetconfSshAccess OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current NETCONF server over SSH access state."
::= { agSystem 146 }
agNewRFC4741NetconfSshAccess OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable NETCONF server over SSH access state."
::= { agSystem 147 }
agCurRFC4741NetconfSshPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP port number that the NETCONF server over SSH is listening to
in the current configuration block."
::= { agSystem 148 }
agNewRFC4741NetconfSshPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP port number that the NETCONF server over SSH is listening to
in the new configuration block."
::= { agSystem 149}
agCurCfgLFDStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the system will put any port
in an error-disabled state due to excessive link flaps.
A port will be put in an error-disabled state due to
excessive link flaps if this object and the port's
agPortCurCfgLFDStatus object both have a value of 'enable'.
A port has an excessive number of link flaps if the number
of link flaps detected during a time period in seconds
indicated by agCurCfgLFDTime exceeds the maximum number of
allowed flaps indicated by agCurCfgLFDFlaps."
DEFVAL { disable }
::= { agSystem 158 }
agNewCfgLFDStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the system should put any port
in an error-disabled state due to excessive link flaps.
Use this object to change the global setting of the Link
Flap Dampening error-disable action."
DEFVAL { disable }
::= { agSystem 159 }
agCurCfgLFDFlaps OBJECT-TYPE
SYNTAX INTEGER (1 .. 100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of flaps allowed
in a time period set by agCurCfgLFDTime."
DEFVAL { 5 }
::= { agSystem 160 }
agNewCfgLFDFlaps OBJECT-TYPE
SYNTAX INTEGER (1 .. 100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum number of flaps that should
be allowed in a time period. Use this object to change the
global maximum number of flaps allowed in a time period."
DEFVAL { 5 }
::= { agSystem 161 }
agCurCfgLFDTime OBJECT-TYPE
SYNTAX INTEGER (5 .. 500)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the length of time period in seconds
during which link flaps are counted."
DEFVAL { 30 }
::= { agSystem 162 }
agNewCfgLFDTime OBJECT-TYPE
SYNTAX INTEGER (5 .. 500)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the length of time period in seconds
that should be used to count link flaps."
DEFVAL { 30 }
::= { agSystem 163 }
agCurCfgDefipData OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of default IP address on data interface,
as configured in the current configuration block."
::= { agSystem 167 }
agNewCfgDefipData OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of default IP address on data interface,
in the new configuration block."
::= { agSystem 168 }
agCurCfgDefipMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable the use of default IP address on mgmt interface,
as configured in the current configuration block."
::= { agSystem 169 }
agNewCfgDefipMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the use of default IP address on mgmt interface,
in the new configuration block."
::= { agSystem 170 }
agNewSecurityMode OBJECT-TYPE
SYNTAX INTEGER {
compatibility(0),
strict(1),
strictsnmpolduser(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to change switch security mode. There are thtree
security modes for Lenovo switch: strict mode, compatibility mode and strict mode
with SNMP not comply.
Strict mode:
Strict mode will have higher security level. Encryption algorithms in strict
mode will be compliance with the NIST SP 800-131A. Detailed information please
refer NIST SP 800-131A mode Functional Specification. SSH will be enabled by
default in strict mode for all platforms. It's strict(1) in this node.
Compatibility mode:
This is the default mode when switch first boot up. MD5/SHA/DES are selected as
Hash/Encryption algorithms. It's compatibility(2) in this node.
Strict mode with SNMP not comply:
To provide backward compatibility option, insecure MD5/DES are supported. It's
strictsnmpolduser(3) in this node.
The next time reload security mode is returned when this object ie read."
::= { agSystem 177 }
agCurSecurityMode OBJECT-TYPE
SYNTAX INTEGER {
compatibility(0),
strict(1),
strictsnmpolduser(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is an action object to change switch security mode. There are thtree
security modes for Lenovo switch: strict mode, compatibility mode and strict mode
with SNMP not comply.
Strict mode:
Strict mode will have higher security level. Encryption algorithms in strict
mode will be compliance with the NIST SP 800-131A. Detailed information please
refer NIST SP 800-131A mode Functional Specification. SSH will be enabled by
default in strict mode for all platforms. It's strict(1) in this node.
Compatibility mode:
This is the default mode when switch first boot up. MD5/SHA/DES are selected as
Hash/Encryption algorithms. It's compatibility(2) in this node.
Strict mode with SNMP not comply:
To provide backward compatibility option, insecure MD5/DES are supported. It's
strictsnmpolduser(3) in this node.
The current security mode is returned when this object ie read."
::= { agSystem 180 }
agNewCfgSslVersionLevel OBJECT-TYPE
SYNTAX INTEGER {
-- sslv3(0),
tls10(1),
tls11(2),
tls12(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of SSL Server Minimum Acceptable Protocol Version."
::= { agSystem 178 }
agCurCfgSslVersionLevel OBJECT-TYPE
SYNTAX INTEGER {
-- sslv3(0),
tls10(1),
tls11(2),
tls12(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of SSL Server Minimum Acceptable Protocol Version."
::= { agSystem 179 }
agCurCfgTrapHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgCurCfgTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current trap hosts configure."
::= { agSystem 184 }
agCurCfgTrapHostEntry OBJECT-TYPE
SYNTAX AgCurCfgTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A trap host configuration on the switch."
INDEX { agCurCfgTrapHostIndex }
::= { agCurCfgTrapHostTable 1 }
AgCurCfgTrapHostEntry ::= SEQUENCE {
agCurCfgTrapHostIndex Integer32,
agCurCfgTrapHostAddress DisplayString ,
agCurCfgTrapHostCommStr DisplayString
}
agCurCfgTrapHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trap host index. Valid range is 1-16"
::= { agCurCfgTrapHostEntry 1 }
agCurCfgTrapHostAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trap host address."
::= { agCurCfgTrapHostEntry 2 }
agCurCfgTrapHostCommStr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trap host community string."
::= { agCurCfgTrapHostEntry 3 }
agNewCfgTrapHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgNewCfgTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for trap host definitions in the new configuration block."
::= { agSystem 185 }
agCurSysHostCert OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Host Certificate"
::= { agSystem 187 }
agNewSecurityPolicy OBJECT-TYPE
SYNTAX INTEGER {
legacy(0),
secure(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The security policy that will take effect after the next boot."
::= { agSystem 191 }
agCurSecurityPolicy OBJECT-TYPE
SYNTAX INTEGER {
legacy(0),
secure(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current security policy."
::= { agSystem 192 }
agSFTPEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In secure mode enable or disable sftp transfers."
::= { agSystem 193 }
agNewCfgTrapHostEntry OBJECT-TYPE
SYNTAX AgNewCfgTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trap host definition table"
INDEX { agNewCfgTrapHostIndex }
::= { agNewCfgTrapHostTable 1 }
AgNewCfgTrapHostEntry ::= SEQUENCE {
agNewCfgTrapHostIndex Integer32,
agNewCfgTrapHostAddress DisplayString ,
agNewCfgTrapHostCommStr DisplayString,
agNewCfgTrapHostDelete INTEGER
}
agNewCfgTrapHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trap host index. Valid range is 1-16"
::= { agNewCfgTrapHostEntry 1 }
agNewCfgTrapHostAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trap host address in the new configuration block.
Setting IPv6 value is not supported in realease 7.9.x."
::= { agNewCfgTrapHostEntry 2 }
agNewCfgTrapHostCommStr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trap host community string in the new configuration block."
::= { agNewCfgTrapHostEntry 3 }
agNewCfgTrapHostDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"By setting the value to delete(2), the entire row is deleted."
::= { agNewCfgTrapHostEntry 4 }
-- if defined(WEB_UI) removed this as it is wrongfully tied to BBI and did not allowed
-- agent to compile without web folder (BBI)
-- Syslog Configuration
agCurCfgSyslogHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The syslog host IP address in the current configuration block."
::= { agSyslog 1 }
agNewCfgSyslogHost OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The syslog host IP address in the new configuration block."
::= { agSyslog 2 }
agCurCfgSyslog2Host OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second syslog host IP address in the current configuration block."
::= { agSyslog 3 }
agNewCfgSyslog2Host OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second syslog host IP address in the new configuration block."
::= { agSyslog 4 }
agCurCfgSyslogFac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The facility level of syslog host in the current configuration block."
::= { agSyslog 5 }
agNewCfgSyslogFac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The facility level of syslog host in the new configuration block."
::= { agSyslog 6 }
agCurCfgSyslog2Fac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The facility level of second syslog host in the current
configuration block."
::= { agSyslog 7 }
agNewCfgSyslog2Fac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The facility level of second syslog host in the new
configuration block."
::= { agSyslog 8 }
agCurCfgSyslogSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of syslog host in the current configuration block."
::= { agSyslog 13 }
agNewCfgSyslogSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of syslog host in the new configuration block."
::= { agSyslog 14 }
agCurCfgSyslog2Sev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of syslog2 host in the current configuration block."
::= { agSyslog 15 }
agNewCfgSyslog2Sev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of syslogs host in the new configuration block."
::= { agSyslog 16 }
agCurCfgSyslogConsoleSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of syslogs console in the current configuration block."
::= { agSyslog 23 }
agNewCfgSyslogConsoleSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of syslogs console in the new configuration block."
::= { agSyslog 24 }
agCurCfgSyslogFlashSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The severity of syslogs flash in the current configuration block."
::= { agSyslog 25 }
agNewCfgSyslogFlashSev OBJECT-TYPE
SYNTAX INTEGER {
emerg0(1),
alert1(2),
crit2(3),
err3(4),
warning4(5),
notice5(6),
info6(7),
debug7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The severity of syslogs flash in the new configuration block."
::= { agSyslog 26 }
agClrSyslogMsgs OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all current Syslog messages."
::= { agSyslog 9 }
agSyslogMsgTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the syslog message table."
::= { agSyslog 10 }
agCurCfgSyslogHostPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the primary Syslog server is connected to."
::= { agSyslog 17 }
agNewCfgSyslogHostPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the primary Syslog server is connected to."
::= { agSyslog 18 }
agCurCfgSyslog2HostPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the secondary Syslog server is connected to."
::= { agSyslog 19 }
agNewCfgSyslog2HostPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the secondary Syslog server is connected to."
::= { agSyslog 20 }
agSyslogMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgSyslogMsgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of syslog messages."
::= { agSyslog 11 }
agSyslogMsgTableEntry OBJECT-TYPE
SYNTAX AgSyslogMsgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A syslog message stored on the switch."
INDEX { agSyslogMsgIndex }
::= { agSyslogMsgTable 1 }
AgSyslogMsgTableEntry ::= SEQUENCE {
agSyslogMsgIndex Integer32,
agSyslogMessage DisplayString
}
agSyslogMsgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The syslog message table index."
::= { agSyslogMsgTableEntry 1 }
agSyslogMessage OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The syslog message."
::= { agSyslogMsgTableEntry 2 }
agLog OBJECT IDENTIFIER ::= { agSyslog 12 }
agNewCfgSyslogTrapConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable console syslog and SNMP trap in the
new configuration block."
::= { agLog 1 }
agCurCfgSyslogTrapConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable console syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 2 }
agNewCfgSyslogTrapSystem OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable system level syslog and SNMP trap in the
new configuration block."
::= { agLog 3 }
agCurCfgSyslogTrapSystem OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable system level syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 4 }
agNewCfgSyslogTrapMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable management(flash, config, login) syslog and SNMP
trap in the new configuration block."
::= { agLog 5 }
agCurCfgSyslogTrapMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable management(flash, config, login) syslog and SNMP
trap, as configured in the current configuration block."
::= { agLog 6 }
agNewCfgSyslogTrapCli OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable CLI generated error syslog and SNMP trap in the
new configuration block."
::= { agLog 7 }
agCurCfgSyslogTrapCli OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable CLI generated error syslog and SNMP trap, as
configured in the current configuration block."
::= { agLog 8 }
agNewCfgSyslogTrapStg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable spanning tree syslog and SNMP trap in the
new configuration block."
::= { agLog 9 }
agCurCfgSyslogTrapStg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable spanning tree syslog and SNMP trap, as
configured in the current configuration block."
::= { agLog 10 }
agNewCfgSyslogTrapVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable VLAN syslog and SNMP trap in the new
configuration block."
::= { agLog 11 }
agCurCfgSyslogTrapVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable VLAN syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 12 }
agNewCfgSyslogTrapSsh OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable SSH, RADIUS syslog and SNMP trap in the new
configuration block."
::= { agLog 19 }
agCurCfgSyslogTrapSsh OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable SSH, RADIUS syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 20 }
agNewCfgSyslogTrapNtp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable NTP syslog and SNMP trap in the new
configuration block."
::= { agLog 25 }
agCurCfgSyslogTrapNtp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable NTP syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 26 }
agNewCfgSyslogTrapIp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable IP related syslog and SNMP trap in the
new configuration block."
::= { agLog 31 }
agCurCfgSyslogTrapIp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable IP related syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 32 }
agNewCfgSyslogTrapWeb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable WEBUI related syslog and SNMP trap in the
new configuration block."
::= { agLog 35 }
agCurCfgSyslogTrapWeb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable WEBUI related syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 36 }
agNewCfgSyslogTrapRmon OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RMON related syslog and SNMP trap
in the new configuration block."
::= { agLog 45 }
agCurCfgSyslogTrapRmon OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RMON related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 46 }
agNewCfgSyslogTrap8021x OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable 802.1x related syslog and SNMP trap
in the new configuration block."
::= { agLog 49 }
agCurCfgSyslogTrap8021x OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable 802.1x related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 50 }
-- 802.1x port stats table
dot1xPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xPortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 802.1x port statistics."
::= { portStats 2 }
dot1xPortStatsTableEntry OBJECT-TYPE
SYNTAX Dot1xPortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the 802.1x port stats table."
INDEX { dot1xPortStatsIndx }
::= { dot1xPortStatsTable 1 }
Dot1xPortStatsTableEntry ::=
SEQUENCE {
dot1xPortStatsIndx PortNumber,
eapolFramesRx Integer32,
eapolFramesTx Integer32,
eapolStartFramesRx Integer32,
eapolLogoffFramesRx Integer32,
eapolRespIdFramesRx Integer32,
eapolRespFramesRx Integer32,
eapolReqIdFramesTx Integer32,
eapolReqFramesTx Integer32,
invalidEapolFramesRx Integer32,
eapLengthErrorFramesRx Integer32,
authEntersConnecting Integer32,
authEapLogoffsWhileConnecting Integer32,
authEntersAuthenticating Integer32,
authSuccessesWhileAuthenticating Integer32,
authTimeoutsWhileAuthenticating Integer32,
authFailWhileAuthenticating Integer32,
authReauthsWhileAuthenticating Integer32,
authEapStartsWhileAuthenticating Integer32,
authEapLogoffWhileAuthenticating Integer32,
authReauthsWhileAuthenticated Integer32,
authEapStartsWhileAuthenticated Integer32,
authEapLogoffWhileAuthenticated Integer32,
backendResponses Integer32,
backendAccessChallenges Integer32,
backendOtherRequestsToSupplicant Integer32,
backendNonNakResponsesFromSupplicant Integer32,
backendAuthSuccesses Integer32,
backendAuthFails Integer32,
lastEapolFrameVersion Integer32,
lastEapolFrameSource MacAddress
,dot1xPortStatsPortAlias DisplayString
}
dot1xPortStatsIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1x port stats index."
::= { dot1xPortStatsTableEntry 1 }
eapolFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 2 }
eapolFramesTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 3 }
eapolStartFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 4 }
eapolLogoffFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 5 }
eapolRespIdFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 6 }
eapolRespFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 7 }
eapolReqIdFramesTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 8 }
eapolReqFramesTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 9 }
invalidEapolFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= {dot1xPortStatsTableEntry 10 }
eapLengthErrorFramesRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 11 }
authEntersConnecting OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 12 }
authEapLogoffsWhileConnecting OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 13 }
authEntersAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 14 }
authSuccessesWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 15 }
authTimeoutsWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 16 }
authFailWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 17 }
authReauthsWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 18 }
authEapStartsWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 19 }
authEapLogoffWhileAuthenticating OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 20 }
authReauthsWhileAuthenticated OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 21 }
authEapStartsWhileAuthenticated OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 22 }
authEapLogoffWhileAuthenticated OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 23 }
backendResponses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 24 }
backendAccessChallenges OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 25 }
backendOtherRequestsToSupplicant OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 26 }
backendNonNakResponsesFromSupplicant OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 27 }
backendAuthSuccesses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 28 }
backendAuthFails OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 29 }
lastEapolFrameVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 30 }
lastEapolFrameSource OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { dot1xPortStatsTableEntry 31 }
dot1xPortStatsPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1x port stats alias."
::= { dot1xPortStatsTableEntry 32 }
agNewCfgSyslogTrapCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable CFG related syslog and SNMP trap in the
new configuration block."
::= { agLog 53 }
agCurCfgSyslogTrapCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable CFG related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 54 }
agNewCfgSyslogTrapServer OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Server related syslog and SNMP trap in the
new configuration block."
::= { agLog 55 }
agCurCfgSyslogTrapServer OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Server related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 56 }
agNewCfgSyslogTrapDifftrak OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Difftrak related syslog and SNMP trap in the
new configuration block."
::= { agLog 57 }
agCurCfgSyslogTrapDifftrak OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Difftrak related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 58 }
agNewCfgSyslogTrapHotlinks OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Hot Links related syslog and SNMP trap in the
new configuration block."
::= { agLog 61 }
agCurCfgSyslogTrapHotlinks OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Hot Links related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 62 }
agNewCfgSyslogTrapLldp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable LLDP related syslog and SNMP trap in the
new configuration block."
::= { agLog 63 }
agCurCfgSyslogTrapLldp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable LLDP related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 64 }
agNewCfgSyslogTrapAll OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all syslog and SNMP traps in the
new configuration block."
::= { agLog 65 }
agCurCfgSyslogTrapAll OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all syslog and SNMP traps, as configured
in the current configuration block."
::= { agLog 66 }
agNewCfgSyslogTrapIpv6 OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable IPv6 related syslog and SNMP trap in the
new configuration block."
::= { agLog 67 }
agCurCfgSyslogTrapIpv6 OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable IPv6 related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 68 }
agNewCfgSyslogTrapFailover OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable failover related syslog and SNMP trap in the
new configuration block."
::= { agLog 73 }
agCurCfgSyslogTrapFailover OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable failover related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 74 }
agNewCfgSyslogTrapLacp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable LACP syslog and SNMP trap in the
new configuration block."
::= { agLog 77 }
agCurCfgSyslogTrapLacp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable LACP syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 78 }
agNewCfgSyslogTrapLink OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all syslog and SNMP traps, in link
up/down."
::= { agLog 79 }
agCurCfgSyslogTrapLink OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all syslog and SNMP traps, as currently
configured in link up/down."
::= { agLog 80 }
agNewCfgSyslogTrapCfgchg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable configuration change related syslog and SNMP trap
in the new configuration block."
::= { agLog 93 }
agCurCfgSyslogTrapCfgchg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable configuration change related syslog and SNMP trap,
as configured in the current configuration block."
::= { agLog 94 }
agNewCfgSyslogTrapVlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Vlag related syslog and SNMP trap."
::= { agLog 95 }
agCurCfgSyslogTrapVlag OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Vlag related syslog and SNMP trap."
::= { agLog 96 }
agNewCfgSyslogTrapIgmpGroup OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all IGMP GROUP-related syslog and SNMP traps."
::= { agLog 99 }
agCurCfgSyslogTrapIgmpGroup OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all IGMP GROUP-related syslog and SNMP traps."
::= { agLog 100 }
agNewCfgSyslogTrapIgmpMrouter OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all IGMP MROUTER-related syslog and SNMP traps."
::= { agLog 101 }
agCurCfgSyslogTrapIgmpMrouter OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all IGMP MROUTER-related syslog and SNMP traps."
::= { agLog 102 }
agNewCfgSyslogTrapIgmpQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all IGMP QUERIER-related syslog and SNMP traps."
::= { agLog 103 }
agCurCfgSyslogTrapIgmpQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all IGMP QUERIER-related syslog and SNMP traps."
::= { agLog 104 }
agNewCfgSyslogTrapPrivateVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all Private VLAN-related syslog and SNMP traps,
as configured in the new configuration block."
::= { agLog 107 }
agCurCfgSyslogTrapPrivateVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all Private VLAN-related syslog and SNMP traps,
as configured in the current configuration block."
::= { agLog 108 }
agNewCfgSyslogTrapSlp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable all SLP-related syslog and SNMP traps,
as configured in the new configuration block."
::= { agLog 109 }
agCurCfgSyslogTrapSlp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable all SLP-related syslog and SNMP traps,
as configured in the current configuration block."
::= { agLog 110 }
agNewCfgSyslogTrapNetconf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Netconf syslog and SNMP trap in the new
configuration block."
::= { agLog 111 }
agCurCfgSyslogTrapNetconf OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Netconf syslog and SNMP trap, as configured
in the current configuration block."
::= { agLog 112 }
-- TFTP Config
agTransferServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The FTP/TFTP server IP address or domain name."
::= { agTransfer 1 }
agTransferImage OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3),
boot(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Where the image file should be loaded in flash."
::= { agTransfer 2 }
agTransferImageFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The image file name to be transferred."
::= { agTransfer 3 }
agTransferCfgFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration file name."
::= { agTransfer 4 }
agTransferDumpFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The core dump file name."
::= { agTransfer 5 }
agTransferAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
img-get(2),
cfg-get(3),
cfg-put(4),
dump-put(5),
img-put(7),
tsdump-put(8)
,ca-get(14)
,hostcert-get(15)
,hostkey-get(16)
,csr-put(18)
,hostcert-only-get(19)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to perform various FTP/TFTP Get or Put functions.
The FTP/TFTP sever is specified in agTransferServer object.
img-get(2) - Download switch image from a specified image
file(agTransferImageFileName) on the FTP/TFTP server to
the destinated storage(agTransferImage).
The duration of the action will depend on the image
downloading and writting time on the network element.
Sugguest 150 seconds timeout setting in MIB Browser to get
the correct response for this action.
cfg-get(3) - Download switch configuration from a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
dump-put(5) - Download switch core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
bkpdump-put(6)- Download switch backup core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
img-put(7) - Upload specified switch image to a specified image
file(agTransferImageFileName) on the FTP/TFTP server.
tsdump-put(8) - Download switch tech support dump to a specified
file(agTransferTSDumpFileName) on the FTP/TFTP server.
bogon-get(9) - Download bogon config file from a specified bogon
file(uses agTransferImageFileName) on the FTP/TFTP server.
ca-get(14) - Download CA root certificate from a specified
file(agTransferCaFileName) on the TFTP server.
This command did not support FTP.
hostcert-get(15) - Download host certificate from a specified
file(agTransferHostCertFileName) on the TFTP server.
This command did not support FTP.
hostkey-get(16) - Download host private key from a specified
file(agTransferHostKeyFileName) on the TFTP server.
This command did not support FTP.
csr-put(18) - Upload CSR generated on the switch to a specified
file(agTransferCSRFileName) on the TFTP/FTP/SFTP server.
hostcert-only-get(19) - Download only the host certificate from a specified
file(agTransferHostCertFileName) on the TFTP/SFTP server.
Use this when the CSR was generated on the switch.
other(1) is returned always when read."
::= { agTransfer 6 }
agTransferLastActionStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The recorded status of the previous FTP/TFTP activity."
::= { agTransfer 7 }
agTransferPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the FTP/TFTP operation should be performed over the
data port or the management port."
::= { agTransfer 8 }
agTransferUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The username for the FTP server or blank for TFTP server."
::= { agTransfer 9 }
agTransferPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password for the FTP server. For security reason, an empty string will be returned when the OID is read."
::= { agTransfer 10 }
agTransferTSDumpFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TS dump file name."
::= { agTransfer 11 }
agTransferLastConfigurationActionStatus OBJECT-TYPE
SYNTAX INTEGER {
successfully(1),
failed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last configuration action using the file ftp/tftp'd
from server."
::= { agTransfer 14 }
agTransferCaFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CA certificate file name."
::= { agTransfer 15 }
agTransferHostCertFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Host certificate file name."
::= { agTransfer 16 }
agTransferHostKeyFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Host private key file name."
::= { agTransfer 17 }
agTransferProtocol OBJECT-TYPE
SYNTAX INTEGER {
tftp(1),
ftp(2),
sftp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol used by this transfer."
::= { agTransfer 18 }
agServerPort OBJECT-TYPE
SYNTAX INTEGER {
tftp(69),
ftp(21),
sftp(22)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port is listened on the server."
::= { agTransfer 19 }
agTransferCSRFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CSR file name ."
::= { agTransfer 26 }
-- Agent Port Table
agPortTableMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the port configuration host table."
::= { agPortConfig 1 }
agPortCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgPortCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port configuration in the current configuration block."
::= { agPortConfig 2 }
agPortCurCfgTableEntry OBJECT-TYPE
SYNTAX AgPortCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port table in the current configuration block."
INDEX { agPortCurCfgIndx }
::= { agPortCurCfgTable 1 }
AgPortCurCfgTableEntry ::= SEQUENCE {
agPortCurCfgIndx PortNumber,
agPortCurCfgState INTEGER,
agPortCurCfgVlanTag INTEGER,
agPortCurCfgRmon INTEGER,
agPortCurCfgPVID Integer32,
agPortCurCfgGigEthAutoNeg INTEGER,
agPortCurCfgGigEthFctl INTEGER,
agPortCurCfgLinkTrap INTEGER,
agPortCurCfgGigEthSpeed INTEGER,
agPortCurCfgGigEthMode INTEGER,
agPortCurCfgDscpRemarking INTEGER,
agPortCurCfgTagPVID INTEGER,
agPortCurCfgTagiPVID INTEGER,
agPortCurCfgMulticastThreshold INTEGER,
agPortCurCfgMulticastThresholdRate INTEGER,
agPortCurCfgBroadcastThreshold INTEGER,
agPortCurCfgBroadcastThresholdRate INTEGER,
agPortCurCfgDLFThreshold INTEGER,
agPortCurCfgDLFThresholdRate INTEGER,
agPortCurCfgPortAlias DisplayString,
agPortCurCfgPortName DisplayString
,agPortCurCfgLearning INTEGER
,agPortCurCfgFloodBlocking INTEGER
,agPortCurCfgType DisplayString
,agPortCurCfgLinkType INTEGER
,agPortCurCfgEdge INTEGER
,agPortCurCfgErrDisableRecovery INTEGER
,agPortCurCfgUdld INTEGER
,agPortCurCfgUdldMode INTEGER
,agPortCurCfgBpduGuard INTEGER
,agPortCurCfgMacAddrNotif INTEGER
,agPortCurCfgStpExtGuard INTEGER
,agPortCurCfgLFDStatus INTEGER
,agPortCurCfgPrivateVlanStatus INTEGER
,agPortCurCfgMappedPrimaryVlans OCTET STRING
,agPortCurCfgAssociatedSecondaryVlans OCTET STRING
,agPortCurCfgSpeed1G INTEGER
}
agPortCurCfgIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in port configurations table."
::= { agPortCurCfgTableEntry 1 }
agPortCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the state of the port."
::= { agPortCurCfgTableEntry 2 }
agPortCurCfgVlanTag OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is VLAN tag state of the port"
::= { agPortCurCfgTableEntry 3 }
agPortCurCfgRmon OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to turn RMON on or off on the port."
::= { agPortCurCfgTableEntry 5 }
agPortCurCfgPVID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default VLAN ID for the port.
"
::= { agPortCurCfgTableEntry 6 }
agPortCurCfgGigEthAutoNeg OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection."
::= { agPortCurCfgTableEntry 11 }
agPortCurCfgGigEthFctl OBJECT-TYPE
SYNTAX INTEGER {
transmit(2),
receive(3),
both(4),
none(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to select port flow control for
gigabit Ethernet connection."
::= { agPortCurCfgTableEntry 12 }
agPortCurCfgPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port name."
::= { agPortCurCfgTableEntry 13 }
agPortCurCfgLinkTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise."
::= { agPortCurCfgTableEntry 16 }
agPortCurCfgGigEthSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
any(4),
mbs1000(5)
,
mbs10000(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selects the port speed for Gigabit Ethernet connection."
::= { agPortCurCfgTableEntry 21 }
agPortCurCfgGigEthMode OBJECT-TYPE
SYNTAX INTEGER {
full-duplex(2),
half-duplex(3),
any(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to select port mode for Gigabit Ethernet connection."
::= { agPortCurCfgTableEntry 22 }
agPortCurCfgDscpRemarking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Dscp remarking for the switch port."
::= { agPortCurCfgTableEntry 23 }
agPortCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port alias."
::= { agPortCurCfgTableEntry 24 }
agPortCurCfgTagPVID OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is PVID tag state of the port"
::= { agPortCurCfgTableEntry 25 }
agPortCurCfgLearning OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable L2 (FDB) Learning for the switch port."
::= { agPortCurCfgTableEntry 26 }
agPortCurCfgFloodBlocking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable flood blocking for the switch port."
::= { agPortCurCfgTableEntry 27 }
agPortCurCfgType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port type."
::= { agPortCurCfgTableEntry 29 }
agPortCurCfgLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of port connection. (for PVRST only)"
::= { agPortCurCfgTableEntry 30 }
agPortCurCfgEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port edge."
::= { agPortCurCfgTableEntry 31 }
agPortCurCfgErrDisableRecovery OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the system will automatically
re-enable this port if it becomes error-disabled. This port
will be re-enabled after the time interval specified by the
agCurCfgErrDisableTimeout object has elapsed.
A port is in error-disabled state when it is operationally
disabled due to abnormal conditions detected on the port.
If this port is error-disabled, it will only be re-enabled
by the system if the agCurCfgErrDisableRecovery object and
this object both have a value of 'enable(1)'."
DEFVAL { enable }
::= { agPortCurCfgTableEntry 35 }
agPortCurCfgUdld OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable UDLD for the switch port."
::= { agPortCurCfgTableEntry 37 }
agPortCurCfgUdldMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
aggressive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable UDLD mode for the switch port."
::= { agPortCurCfgTableEntry 38 }
agPortCurCfgBpduGuard OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable BPDU guard for the switch port."
::= { agPortCurCfgTableEntry 41 }
agPortCurCfgMulticastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the port's Multicast Threshold."
::= { agPortCurCfgTableEntry 42 }
agPortCurCfgMulticastThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current port's Multicast Threshold Rate."
::= { agPortCurCfgTableEntry 43 }
agPortCurCfgBroadcastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the port's Broadcast Threshold."
::= { agPortCurCfgTableEntry 44 }
agPortCurCfgBroadcastThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current port's Broadcast Threshold Rate."
::= { agPortCurCfgTableEntry 45 }
agPortCurCfgDLFThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current status of the port's Destination Lookup Fail Threshold."
::= { agPortCurCfgTableEntry 46 }
agPortCurCfgDLFThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current port's Destination Lookup Fail Threshold Rate."
::= { agPortCurCfgTableEntry 47 }
agPortCurCfgMacAddrNotif OBJECT-TYPE
SYNTAX INTEGER{
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the state of the MAC address notification
syslog messages on the port."
::= { agPortCurCfgTableEntry 48 }
agPortCurCfgTagiPVID OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is ingress PVID tag state of the port"
::= { agPortCurCfgTableEntry 49 }
agPortCurCfgStpExtGuard OBJECT-TYPE
SYNTAX INTEGER {
loop(1),
root(2),
none(3),
default(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state for spanning tree guard type"
::= { agPortCurCfgTableEntry 52 }
agPortCurCfgLFDStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the system will put this port
in an error-disabled state due to excessive link flaps.
A port will be put in an error-disabled state due to
excessive link flaps if this object and the global
agCurCfgLFDStatus object both have a value of 'enable'.
A port has an excessive number of link flaps if the number
of link flaps detected during a time period in seconds
indicated by agCurCfgLFDTime exceeds the maximum number of
allowed flaps indicated by agCurCfgLFDFlaps."
DEFVAL { enable }
::= { agPortCurCfgTableEntry 53 }
agPortCurCfgPrivateVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of Private VLAN on this port"
::= { agPortCurCfgTableEntry 61 }
agPortCurCfgMappedPrimaryVlans OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented primary VLAN associated to the port
0 - The represented primary VLAN does not associated to the port"
::= { agPortCurCfgTableEntry 62 }
agPortCurCfgAssociatedSecondaryVlans OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Secondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented secondary VLAN associated to the port
0 - The represented secondary VLAN does not be associated to the port"
::= { agPortCurCfgTableEntry 63 }
agPortCurCfgSpeed1G OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Limit the port to 1G speed"
::= { agPortCurCfgTableEntry 69 }
agPortNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgPortNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port configuration in the new configuration block."
::= { agPortConfig 3 }
agPortNewCfgTableEntry OBJECT-TYPE
SYNTAX AgPortNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port configuration table in the new configuration block."
INDEX { agPortNewCfgIndx }
::= { agPortNewCfgTable 1 }
AgPortNewCfgTableEntry ::= SEQUENCE {
agPortNewCfgIndx PortNumber,
agPortNewCfgState INTEGER,
agPortNewCfgVlanTag INTEGER,
agPortNewCfgRmon INTEGER,
agPortNewCfgPVID Integer32,
agPortNewCfgGigEthAutoNeg INTEGER,
agPortNewCfgGigEthFctl INTEGER,
agPortNewCfgLinkTrap INTEGER,
agPortNewCfgGigEthSpeed INTEGER,
agPortNewCfgGigEthMode INTEGER,
agPortNewCfgDscpRemarking INTEGER,
agPortNewCfgTagPVID INTEGER,
agPortNewCfgTagiPVID INTEGER,
agPortNewCfgMulticastThreshold INTEGER,
agPortNewCfgMulticastThresholdRate INTEGER,
agPortNewCfgBroadcastThreshold INTEGER,
agPortNewCfgBroadcastThresholdRate INTEGER,
agPortNewCfgDLFThreshold INTEGER,
agPortNewCfgDLFThresholdRate INTEGER,
agPortNewCfgPortName DisplayString
,agPortNewCfgLearning INTEGER
,agPortNewCfgFloodBlocking INTEGER
,agPortNewCfgType DisplayString
,agPortNewCfgLinkType INTEGER
,agPortNewCfgEdge INTEGER
,agPortNewCfgErrDisableRecovery INTEGER
,agPortNewCfgUdld INTEGER
,agPortNewCfgUdldMode INTEGER
,agPortNewCfgBpduGuard INTEGER
,agPortNewCfgMacAddrNotif INTEGER
,agPortNewCfgStpExtGuard INTEGER
,agPortNewCfgLFDStatus INTEGER
,agPortNewCfgPrivateVlanStatus INTEGER
,agPortNewCfgMappedPrimaryVlans OCTET STRING
,agPortNewCfgAddPrimaryVlan Unsigned32
,agPortNewCfgDelPrimaryVlan Unsigned32
,agPortNewCfgAssociatedSecondaryVlans OCTET STRING
,agPortNewCfgAddSecondaryVlan Unsigned32
,agPortNewCfgDelSecondaryVlan Unsigned32
,agPortNewCfgPortAlias DisplayString
,agPortNewCfgSpeed1G INTEGER
}
agPortNewCfgIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in port configurations table."
::= { agPortNewCfgTableEntry 1 }
agPortNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the state of the port."
::= { agPortNewCfgTableEntry 2 }
agPortNewCfgVlanTag OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is VLAN tag state of the port"
::= { agPortNewCfgTableEntry 3 }
agPortNewCfgRmon OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to turn RMON on or off on the port."
::= { agPortNewCfgTableEntry 5 }
agPortNewCfgPVID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default VLAN ID for the port.
"
::= { agPortNewCfgTableEntry 6 }
agPortNewCfgGigEthAutoNeg OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to turn the autonegotiation on or off
for gigabit Ethernet connection."
::= { agPortNewCfgTableEntry 11 }
agPortNewCfgGigEthFctl OBJECT-TYPE
SYNTAX INTEGER {
transmit(2),
receive(3),
both(4),
none(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to select port flow control for
gigabit Ethernet connection."
::= { agPortNewCfgTableEntry 12 }
agPortNewCfgPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The switch port name."
::= { agPortNewCfgTableEntry 13 }
agPortNewCfgLinkTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise."
::= { agPortNewCfgTableEntry 16 }
agPortNewCfgGigEthSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
any(4),
mbs1000(5)
,
mbs10000(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects the port speed for Gigabit Ethernet connection."
::= { agPortNewCfgTableEntry 21 }
agPortNewCfgGigEthMode OBJECT-TYPE
SYNTAX INTEGER {
full-duplex(2),
half-duplex(3),
any(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to select port mode for Gigabit Ethernet connection.
"
::= { agPortNewCfgTableEntry 22 }
agPortNewCfgDscpRemarking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Dscp remarking for the switch port."
::= { agPortNewCfgTableEntry 23 }
agPortNewCfgTagPVID OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is PVID tag state of the port"
::= { agPortNewCfgTableEntry 25 }
agPortNewCfgLearning OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable L2 (FDB) Learning for the switch port."
::= { agPortNewCfgTableEntry 26 }
agPortNewCfgFloodBlocking OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable flood blocking for the switch port."
::= { agPortNewCfgTableEntry 27 }
agPortNewCfgType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch port type."
::= { agPortNewCfgTableEntry 29 }
agPortNewCfgLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of port connection. (for PVRST only)"
::= { agPortNewCfgTableEntry 30 }
agPortNewCfgEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of port edge."
::= { agPortNewCfgTableEntry 31 }
agPortNewCfgErrDisableRecovery OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the system should automatically
re-enable this port when it becomes error-disabled. Use this
object to change the port-level setting of the error-disable
recovery action."
DEFVAL { enable }
::= { agPortNewCfgTableEntry 35 }
agPortNewCfgUdld OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable UDLD for the switch port."
::= { agPortNewCfgTableEntry 37 }
agPortNewCfgUdldMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
aggressive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable UDLD mode for the switch port."
::= { agPortNewCfgTableEntry 38 }
agPortNewCfgBpduGuard OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable BPDU guard for the switch port."
::= { agPortNewCfgTableEntry 41 }
agPortNewCfgMulticastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Multicast Threshold."
::= { agPortNewCfgTableEntry 42 }
agPortNewCfgMulticastThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New port's Multicast Threshold Rate."
::= { agPortNewCfgTableEntry 43 }
agPortNewCfgBroadcastThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Broadcast Threshold."
::= { agPortNewCfgTableEntry 44 }
agPortNewCfgBroadcastThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New port's Broadcast Threshold Rate."
::= { agPortNewCfgTableEntry 45 }
agPortNewCfgDLFThreshold OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New status of the port's Destination Lookup Fail Threshold."
::= { agPortNewCfgTableEntry 46 }
agPortNewCfgDLFThresholdRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"New port's Destination Lookup Fail Threshold Rate."
::= { agPortNewCfgTableEntry 47 }
agPortNewCfgMacAddrNotif OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or Disables the MAC address notification
syslog messages on the port."
::= { agPortNewCfgTableEntry 48 }
agPortNewCfgTagiPVID OBJECT-TYPE
SYNTAX INTEGER {
tagged(2),
untagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is ingress PVID tag state of the port"
::= { agPortNewCfgTableEntry 49 }
agPortNewCfgStpExtGuard OBJECT-TYPE
SYNTAX INTEGER {
loop(1),
root(2),
none(3),
default(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set spanning tree guard type"
::= { agPortNewCfgTableEntry 52 }
agPortNewCfgLFDStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the system should put this port
in an error-disabled state due to excessive link flaps.
Use this object to change the port setting of the Link Flap
Dampening error-disable action."
DEFVAL { enable }
::= { agPortNewCfgTableEntry 53 }
agPortNewCfgPrivateVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the Private VLAN on this port"
::= { agPortNewCfgTableEntry 61 }
agPortNewCfgMappedPrimaryVlans OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary VLAN list mapped to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented primary VLAN associate to the port
0 - The represented primary VLAN does not associate to the port"
::= { agPortNewCfgTableEntry 62 }
agPortNewCfgAddPrimaryVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Adds the port to the specified primary VLAN. A '0' value is
returned when read."
::= { agPortNewCfgTableEntry 63 }
agPortNewCfgDelPrimaryVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Removes the port from the specified primary VLAN. A '0' value is
returned when read."
::= { agPortNewCfgTableEntry 64 }
agPortNewCfgAssociatedSecondaryVlans OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Secondary VLAN list associated to port.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 8
|| ||
|| ||___ vlan 7
|| |____ vlan 6
|| . . .
||_________ vlan 1
|__________ reserved
where x : 1 - The represented secondary VLAN associated to the port
0 - The represented secondary VLAN does not be associated to the port"
::= { agPortNewCfgTableEntry 65 }
agPortNewCfgAddSecondaryVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Adds the port to the specified secondary VLAN. A '0' value is
returned when read."
::= { agPortNewCfgTableEntry 66 }
agPortNewCfgDelSecondaryVlan OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Removes the port from the secondary VLAN. A '0' value is
returned when read."
::= { agPortNewCfgTableEntry 67 }
agPortNewCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { agPortNewCfgTableEntry 68 }
agPortNewCfgSpeed1G OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Limit the port to 1G speed"
::= { agPortNewCfgTableEntry 69 }
-- Agent Fast Forwarding Port Table
-- Agent Fast Forwarding Port Table
-- SSH Configuration
sshCurCfgScpAdm OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCP-only admin password."
::= { agSSHConfig 3 }
sshNewCfgScpAdm OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set SCP-only admin password."
::= { agSSHConfig 4 }
sshNewCfgHKeyGen OBJECT-TYPE
SYNTAX INTEGER {
generate(1),
other(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to generate the RSA host key.
other(2) is returned always when read.
The following values are writable: generate(1).. Generate the RSA host key."
::= { agSSHConfig 5 }
sshCurCfgSSHPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSH server port number."
::= { agSSHConfig 7 }
sshNewCfgSSHPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set SSH server port number."
::= { agSSHConfig 8 }
sshCurCfgScpApplySave OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCP apply and save."
::= { agSSHConfig 9 }
sshNewCfgScpApplySave OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the SCP apply and save."
::= { agSSHConfig 10 }
sshCurCfgStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSH server status."
::= { agSSHConfig 11 }
sshNewCfgStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn SSH server ON/OFF."
::= { agSSHConfig 12 }
-- RADIUS Configuration
radCurCfgPrimaryServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Hostname of the Primary RADIUS server."
::= { agRadiusConfig 1 }
radNewCfgPrimaryServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Hostname of the Primary RADIUS server."
::= { agRadiusConfig 2 }
radCurCfgSecondaryServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Hostname of the Secondary RADIUS server."
::= { agRadiusConfig 3 }
radNewCfgSecondaryServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Hostname of the Secondary RADIUS server."
::= { agRadiusConfig 4 }
radCurCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the RADIUS port number for authentication."
::= { agRadiusConfig 5 }
radNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the RADIUS port number for authentication."
::= { agRadiusConfig 6 }
radCurCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to RADIUS server."
::= { agRadiusConfig 7 }
radNewCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to RADIUS server."
::= { agRadiusConfig 8 }
radCurCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retries to the RADIUS server."
::= { agRadiusConfig 9 }
radNewCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries to the RADIUS server."
::= { agRadiusConfig 10 }
radCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RADIUS authentication."
::= { agRadiusConfig 11 }
radNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RADIUS authentication."
::= { agRadiusConfig 12 }
radCurCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RADIUS authentication string."
::= { agRadiusConfig 13 }
radNewCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS authentication string."
::= { agRadiusConfig 14 }
radCurCfgLocal OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RADIUS local for telnet/ssh/http/https."
::= { agRadiusConfig 15 }
radNewCfgLocal OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RADIUS local for telnet/ssh/http/https."
::= { agRadiusConfig 16 }
radCurCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second RADIUS authentication string."
::= { agRadiusConfig 17 }
radNewCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second RADIUS authentication string."
::= { agRadiusConfig 18 }
radCurCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable RADIUS secure local for telnet."
::= { agRadiusConfig 19 }
radNewCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable RADIUS secure local for telnet."
::= { agRadiusConfig 20 }
radCurCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the Radius should be performed over the
data port or the management port."
::= { agRadiusConfig 21 }
radNewCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the Radius should be performed over the
data port or the management port."
::= { agRadiusConfig 22 }
radCurCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the Radius should be performed over the
data port or the management port."
::= { agRadiusConfig 23 }
radNewCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the Radius should be performed over the
data port or the management port."
::= { agRadiusConfig 24 }
-- NTP Configuration
agCurCfgNTPServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NTP Server Address."
::= { agNTP 1 }
agNewCfgNTPServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NTP Server Address."
::= { agNTP 2 }
agCurCfgNTPResyncInterval OBJECT-TYPE
SYNTAX INTEGER (5..44640)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NTP Server resync interval in minutes."
::= { agNTP 3 }
agNewCfgNTPResyncInterval OBJECT-TYPE
SYNTAX INTEGER (5..44640)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The NTP Server resync interval in minutes."
::= { agNTP 4 }
agCurCfgNTPService OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable NTP Service."
::= { agNTP 9 }
agNewCfgNTPService OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable NTP Service."
::= { agNTP 10 }
agCurCfgNTPSecServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Secondary NTP Server Address."
::= { agNTP 11 }
agNewCfgNTPSecServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Secondary NTP Server Address."
::= { agNTP 12 }
agCurCfgNTPServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the primary server is connected to."
::= { agNTP 13 }
agNewCfgNTPServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the primary server is connected to."
::= { agNTP 14 }
agCurCfgNTPSecServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the secondary server is connected to."
::= { agNTP 15 }
agNewCfgNTPSecServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the secondary server is connected to."
::= { agNTP 16 }
-- APPLY Configuration
agApplyPending OBJECT-TYPE
SYNTAX INTEGER {
applyNeeded(2),
noApplyNeeded(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when read, gives the user information
whether an apply action is needed and that the configuration
has been chaged by the user actions. The user then can
apply the changes by setting proper value to the object
agApplyConfiguration described above."
::= { agApply 1 }
agApplyConfig OBJECT-TYPE
SYNTAX INTEGER {
apply(1),
idle(2),
inprogress(3),
complete(4),
failed(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(2) indicates that there is no apply in progess.
complete(4) indicates that the last apply operation is completed.
Setting the value to apply(1), will write all the changes made
since the last apply to the current configuration block.
If the apply is successful this variable will return the state
'complete' else it will return 'failed'. In case of failure,
to read the reason for failure use the agApplyTable.
Once the operation is completed or the agApplyTable is read in case
of failure, the apply buffer needs to be freed and the agApplyConfig
should be set back to 'idle' state so others can issue the apply
command via SNMP."
::= { agApply 2 }
agApplyTableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of strings in the apply table."
::= { agApply 4 }
agApplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgApplyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of failure reasons for an apply of current
configuration block changes."
::= { agApply 5 }
agApplyTableEntry OBJECT-TYPE
SYNTAX AgApplyTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of failure reasons for an apply
(information about a particular reason of failure)."
INDEX { agApplyIndex }
::= { agApplyTable 1 }
AgApplyTableEntry ::= SEQUENCE {
agApplyIndex Integer32,
agApplyString OCTET STRING
}
agApplyIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index."
::= { agApplyTableEntry 1 }
agApplyString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string in the apply table."
::= { agApplyTableEntry 2 }
-- TACACS+ Configuration
tacCurCfgPrimaryServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Hostname of the Primary TACACS+ server."
::= { agTacacsConfig 1 }
tacNewCfgPrimaryServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Hostname of the Primary TACACS+ server."
::= { agTacacsConfig 2 }
tacCurCfgSecondaryServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Hostname of the Secondary TACACS+ server."
::= { agTacacsConfig 3 }
tacNewCfgSecondaryServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Hostname of the Secondary TACACS+ server."
::= { agTacacsConfig 4 }
tacCurCfgPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the TACACS+ port number."
::= { agTacacsConfig 5 }
tacNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the TACACS+ port number."
::= { agTacacsConfig 6 }
tacCurCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (4..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to TACACS+ server."
::= { agTacacsConfig 7 }
tacNewCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (4..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to TACACS+ server."
::= { agTacacsConfig 8 }
tacCurCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retries to the TACACS+ server."
::= { agTacacsConfig 9 }
tacNewCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries to the TACACS+ server."
::= { agTacacsConfig 10 }
tacCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ authentication."
::= { agTacacsConfig 11 }
tacNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ authentication."
::= { agTacacsConfig 12 }
tacCurCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TACACS+ authentication string."
::= { agTacacsConfig 13 }
tacNewCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TACACS+ authentication string."
::= { agTacacsConfig 14 }
tacCurCfgLocal OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ local for telnet/ssh/http/https."
::= { agTacacsConfig 15 }
tacNewCfgLocal OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ local for telnet/ssh/http/https."
::= { agTacacsConfig 16 }
tacCurCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second TACACS+ authentication string."
::= { agTacacsConfig 17 }
tacNewCfgAuthenSecondString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second TACACS+ authentication string."
::= { agTacacsConfig 18 }
tacCurCfgCmdAuthor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command authorization."
::= { agTacacsConfig 19 }
tacNewCfgCmdAuthor OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command authorization."
::= { agTacacsConfig 20 }
tacCurCfgCmdLogging OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command logging."
::= { agTacacsConfig 21 }
tacNewCfgCmdLogging OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ command logging."
::= { agTacacsConfig 22 }
tacCurCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable TACACS+ secure local for telnet."
::= { agTacacsConfig 23 }
tacNewCfgSecBd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable TACACS+ secure local for telnet."
::= { agTacacsConfig 24 }
tacCurCfgCmap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable Tacacs+ new privilege level mapping, as
configured in the current configuration block."
::= { agTacacsConfig 25 }
tacNewCfgCmap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable Tacacs+ new privilege level mapping."
::= { agTacacsConfig 26 }
tacCurCfgEnaPassChange OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Enable/Disable Tacacs+ password change."
::= { agTacacsConfig 29 }
tacNewCfgEnaPassChange OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable Tacacs+ password change."
::= { agTacacsConfig 30 }
tacChangePassForUser OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The username for changing server password."
::= { agTacacsConfig 31 }
tacChangePassCurPass OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current password for tacacs server."
::= { agTacacsConfig 32 }
tacChangePassNewPass OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The new password for tacacs server."
::= { agTacacsConfig 33 }
tacChangePassForServer OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Change password for <1/2> Tacacs+ server."
::= { agTacacsConfig 34 }
tacCurCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the Tacacs should be performed over the
data port or the management port."
::= { agTacacsConfig 35 }
tacNewCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the Tacacs should be performed over the
data port or the management port."
::= { agTacacsConfig 36 }
tacCurCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the Tacacs should be performed over the
data port or the management port."
::= { agTacacsConfig 37 }
tacNewCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the Tacacs should be performed over the
data port or the management port."
::= { agTacacsConfig 38 }
agTacacsUserMapCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgTacacsUserMapCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of tacacs+ user map current configuration."
::= { agTacacsConfig 39 }
agTacacsUserMapCurCfgTableEntry OBJECT-TYPE
SYNTAX AgTacacsUserMapCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the tacacs+ user mapping table."
INDEX { agTacacsUserMapCurCfgUId }
::= { agTacacsUserMapCurCfgTable 1 }
AgTacacsUserMapCurCfgTableEntry ::= SEQUENCE {
agTacacsUserMapCurCfgUId Integer32,
agTacacsUserMapCurCfgMapping INTEGER
}
agTacacsUserMapCurCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current config remote privilege identifier.
The identifier value corresponds to the remote privilege."
::= { agTacacsUserMapCurCfgTableEntry 1 }
agTacacsUserMapCurCfgMapping OBJECT-TYPE
SYNTAX INTEGER {
none(0),
user(1),
oper(2),
admin(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(user, oper, admin)
Example: For the remote privilege 15, we have the index 16:
agTacacsUserMapCurCfgUId.16 = 15."
::= { agTacacsUserMapCurCfgTableEntry 2 }
agTacacsUserMapNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgTacacsUserMapNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of tacacs+ user map new configuration."
::= { agTacacsConfig 40 }
tacNewCfgDirectedRequest OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
restricted(2),
no-truncate(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable tacacs directed request."
::= { agTacacsConfig 41 }
tacCurCfgDirectedRequest OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
restricted(2),
no-truncate(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current tacacs directed request state."
::= { agTacacsConfig 42 }
agTacacsUserMapNewCfgTableEntry OBJECT-TYPE
SYNTAX AgTacacsUserMapNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the tacacs+ user mapping table."
INDEX { agTacacsUserMapNewCfgUId }
::= { agTacacsUserMapNewCfgTable 1 }
AgTacacsUserMapNewCfgTableEntry ::= SEQUENCE {
agTacacsUserMapNewCfgUId Integer32,
agTacacsUserMapNewCfgMapping INTEGER
}
agTacacsUserMapNewCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The new config remote privilege identifier.
The identifier value corresponds to the remote privilege."
::= { agTacacsUserMapNewCfgTableEntry 1 }
agTacacsUserMapNewCfgMapping OBJECT-TYPE
SYNTAX INTEGER {
none(0),
user(1),
oper(2),
admin(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set new Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(user, oper, admin)
Example: For the remote privilege 15, we have the index 16:
agTacacsUserMapNewCfgUId.16 = 15."
::= { agTacacsUserMapNewCfgTableEntry 2 }
tacCurCfgAttempts OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of login attempts to the TACACS+ server."
::= { agTacacsConfig 43 }
tacNewCfgAttempts OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of login attempts to the TACACS+ server."
::= { agTacacsConfig 44 }
tacCurBypassEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the enable bypass.If the status of this object
is enabled, user authenticated via TACACS+ with admin
previllage is granted enable previllage access.If disabled,
admin users will be provided with enable previllage access
based on enable password configured."
DEFVAL { enable }
::= { agTacacsConfig 45 }
tacNewBypassEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of the enable bypass.If the status of this object
is enabled, user authenticated via TACACS+ with admin
previllage is granted enable previllage access.If disabled,
admin users will be provided with enable previllage access
based on enable password configured."
DEFVAL { enable }
::= { agTacacsConfig 46 }
tacCurCfgEnableAccounting OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Current TACACS+ accounting state."
::= { agTacacsConfig 47 }
tacNewCfgEnableAccounting OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Enable/Disable TACACS+ accounting."
::= { agTacacsConfig 48 }
-- Multiple Management network MIB objects
agMgmtNetTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the Management
Network Table."
::= { agMgmtNetConfig 1 }
agCurCfgMgmtNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgCurCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for Management Network definitions
in the current configuration block."
::= { agMgmtNetConfig 2 }
agCurCfgMgmtNetEntry OBJECT-TYPE
SYNTAX AgCurCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the management network definition table."
INDEX { agCurCfgMgmtNetIndex }
::= { agCurCfgMgmtNetTable 1 }
AgCurCfgMgmtNetEntry ::= SEQUENCE {
agCurCfgMgmtNetIndex Integer32,
agCurCfgMgmtNetSubnet DisplayString,
agCurCfgMgmtNetMask DisplayString
}
agCurCfgMgmtNetIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Management Network Definition table."
::= { agCurCfgMgmtNetEntry 1 }
agCurCfgMgmtNetSubnet OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Management Network Address in the current configuration
block."
::= { agCurCfgMgmtNetEntry 2 }
agCurCfgMgmtNetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Management Network Mask/Prefix Length in the current configuration
block."
::= { agCurCfgMgmtNetEntry 3 }
agNewCfgMgmtNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgNewCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for Management Network definitions
in the new configuration block."
::= { agMgmtNetConfig 3 }
agNewCfgMgmtNetEntry OBJECT-TYPE
SYNTAX AgNewCfgMgmtNetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the management network definition table."
INDEX { agNewCfgMgmtNetIndex }
::= { agNewCfgMgmtNetTable 1 }
AgNewCfgMgmtNetEntry ::= SEQUENCE {
agNewCfgMgmtNetIndex Integer32,
agNewCfgMgmtNetSubnet DisplayString,
agNewCfgMgmtNetMask DisplayString,
agNewCfgMgmtNetDelete INTEGER
}
agNewCfgMgmtNetIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the Management Network Definition table."
::= { agNewCfgMgmtNetEntry 1 }
agNewCfgMgmtNetSubnet OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Management Network Address in the new configuration
block."
::= { agNewCfgMgmtNetEntry 2 }
agNewCfgMgmtNetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Management Network Mask/Prefix length in the new configuration
block."
::= { agNewCfgMgmtNetEntry 3 }
agNewCfgMgmtNetDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"By setting the value to delete(2), the entire row is deleted."
::= { agNewCfgMgmtNetEntry 4 }
agMgmtNetClear OBJECT-TYPE
SYNTAX INTEGER {
other(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By setting the value to delete(2), the entire table is cleared."
::= { agMgmtNetConfig 4 }
-- Scheduled Reboot Group
agCfgBootResetParameters OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"String formatated as 'weekday hour minute'
where
- weekday is none(0),sunday(1),monday(2),
tuesday(3),wednesday(4),thursday(5),friday(6),
saturday(7)
- hour is the hour in 24-hour format for reboot
- minutes are the minutes [00] for reboot"
::= { agBoot 1 }
agCfgBootReset OBJECT-TYPE
SYNTAX INTEGER {
none(1),
cancel(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cancel pending switch reset."
::= { agBoot 4 }
agCfgBootNxtResetTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Display the next scheduled reboot time."
::= { agBoot 5 }
agCfgBootPendingReset OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
pending(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows if there is any pending reboot scheduled.
You should cancel any pending reboot scheduled
before setting another."
::= { agBoot 6 }
agAccessUserMaxUserID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of User IDs."
::= { agAccess 1 }
agAccessCurStrongPassword OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of strong password."
::= { agAccess 4 }
agAccessNewStrongPassword OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to enabled(1) enables strong
password support, while disabled(0) disables it."
::= { agAccess 5 }
agAccessCurStrongPassValidity OBJECT-TYPE
SYNTAX INTEGER (1..365)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Password validity in days."
::= { agAccess 6 }
agAccessNewStrongPassValidity OBJECT-TYPE
SYNTAX INTEGER (1..365)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get or set password validity in days."
::= { agAccess 7 }
agAccessCurStrongPassWarning OBJECT-TYPE
SYNTAX INTEGER (1..365)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Warning days before password expires."
::= { agAccess 8 }
agAccessNewStrongPassWarning OBJECT-TYPE
SYNTAX INTEGER (1..365)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get or set warning days before password expires."
::= { agAccess 9 }
agAccessCurStrongPassFailLog OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of failed logins that trigger
security notifications."
::= { agAccess 10 }
agAccessNewStrongPassFailLog OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get or set number of failed logins that trigger
security notifications."
::= { agAccess 11 }
agAccessCurDefaultAdmin OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get default admin account state. (1) indicates enabled and (0) indicates
disabled (0). Default it is enabled."
::= { agAccess 12 }
agAccessNewDefaultAdmin OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to enabled (1) will enable the default admin account while
disabled (0) will disable the default admin account. Default it is enabled."
::= { agAccess 13 }
agAccessCurStrongPassLockout OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of Lockout"
::= { agAccess 14 }
agAccessNewStrongPassLockout OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to enabled (1) enables account locking after trying for failed login
attempts. While disabled (0) disables account locking."
::= { agAccess 15 }
agAccessCurStrongPassAttemptsMaxFail OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max number of failed logins before disabling account. Default value is 6"
::= { agAccess 16 }
agAccessNewStrongPassAttemptsMaxFail OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets Max number of failed logins before disabling account. Default value is 6"
::= { agAccess 17 }
agAccessUserCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgAccessUserCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Access user configuration."
::= { agAccess 2 }
agAccessUserCurCfgTableEntry OBJECT-TYPE
SYNTAX AgAccessUserCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Access user configuration table."
INDEX { agAccessUserCurCfgUId }
::= { agAccessUserCurCfgTable 1 }
AgAccessUserCurCfgTableEntry ::= SEQUENCE {
agAccessUserCurCfgUId Integer32,
agAccessUserCurCos INTEGER,
agAccessUserCurCfgName DisplayString,
agAccessUserCurCfgPswd DisplayString,
agAccessUserCurCfgState INTEGER
}
agAccessUserCurCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User identifier."
::= { agAccessUserCurCfgTableEntry 1 }
agAccessUserCurCos OBJECT-TYPE
SYNTAX INTEGER {
user(0),
oper(3),
admin(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user class of service."
::= { agAccessUserCurCfgTableEntry 2 }
agAccessUserCurCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user name. Please note, the max length is 8 in stacking mode."
::= { agAccessUserCurCfgTableEntry 3 }
agAccessUserCurCfgPswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The character string representing the user password."
::= { agAccessUserCurCfgTableEntry 4 }
agAccessUserCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User validation (enabled or disabled) in current
configuration block."
::= { agAccessUserCurCfgTableEntry 6 }
agAccessUserNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgAccessUserNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Access user configuration."
::= { agAccess 3 }
agAccessUserNewCfgTableEntry OBJECT-TYPE
SYNTAX AgAccessUserNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Access user configuration table."
INDEX { agAccessUserNewCfgUId }
::= { agAccessUserNewCfgTable 1 }
AgAccessUserNewCfgTableEntry ::= SEQUENCE {
agAccessUserNewCfgUId Integer32,
agAccessUserNewCos INTEGER,
agAccessUserNewCfgName DisplayString,
agAccessUserNewCfgPswd DisplayString,
agAccessUserNewCfgState INTEGER,
agAccessUserNewCfgDelete INTEGER
}
agAccessUserNewCfgUId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The User identifier."
::= { agAccessUserNewCfgTableEntry 1 }
agAccessUserNewCos OBJECT-TYPE
SYNTAX INTEGER {
user(0),
oper(3),
admin(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user class of service."
::= { agAccessUserNewCfgTableEntry 2 }
agAccessUserNewCfgName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The user name. Please note, the max length is 8 in stacking mode."
::= { agAccessUserNewCfgTableEntry 3 }
agAccessUserNewCfgPswd OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The character string representing the user password."
::= { agAccessUserNewCfgTableEntry 4 }
agAccessUserNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"User validation (enabled or disabled) in new
configuration block."
::= { agAccessUserNewCfgTableEntry 7 }
agAccessUserNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a User"
::= { agAccessUserNewCfgTableEntry 8 }
-- LDAP Configuration
ldapCurCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Primary LDAP server,it can be an ipv4 or ipv6 address."
::= { agLdapConfig 1 }
ldapNewCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Primary LDAP server,it can be an ipv4 or ipv6 address."
::= { agLdapConfig 2 }
ldapCurCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the Secondary LDAP server,it can be an ipv4 or ipv6 address."
::= { agLdapConfig 3 }
ldapNewCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the Secondary LDAP server,it can be an ipv4 or ipv6 address."
::= { agLdapConfig 4 }
ldapCurCfgPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the LDAP port number."
::= { agLdapConfig 5 }
ldapNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the LDAP port number."
::= { agLdapConfig 6 }
ldapCurCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of retries to the LDAP server."
::= { agLdapConfig 7 }
ldapNewCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries to the LDAP server."
::= { agLdapConfig 8 }
ldapCurCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (4..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to LDAP server."
::= { agLdapConfig 9 }
ldapNewCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (4..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of seconds before resending authentication
to LDAP server."
::= { agLdapConfig 10 }
ldapCurCfgDomain OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LDAP domain name."
::= { agLdapConfig 11 }
ldapNewCfgDomain OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LDAP domain name."
::= { agLdapConfig 12 }
ldapCurCfgLocal OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable LDAP local for telnet/ssh/http/https."
::= { agLdapConfig 13 }
ldapNewCfgLocal OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable LDAP local for telnet/ssh/http/https."
::= { agLdapConfig 14 }
ldapCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable LDAP authentication."
::= { agLdapConfig 15 }
ldapNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable LDAP authentication."
::= { agLdapConfig 16 }
ldapCurCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the LDAP should be performed over the
data port or the management port."
::= { agLdapConfig 17 }
ldapNewCfgPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the LDAP should be performed over the
data port or the management port."
::= { agLdapConfig 18 }
ldapCurCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify whether the LDAP should be performed over the
data port or the management port."
::= { agLdapConfig 19 }
ldapNewCfgSecPorttoUse OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify whether the LDAP should be performed over the
data port or the management port."
::= { agLdapConfig 20 }
ldapCurCfgUserNameAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LDAP username attribute."
::= { agLdapConfig 21 }
ldapNewCfgUserNameAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LDAP username attribute (default = uid)."
::= { agLdapConfig 22 }
ldapCurCfgGroupAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..23))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LDAP group attribute."
::= { agLdapConfig 30 }
ldapNewCfgGroupAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..23))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LDAP group attribute (default=memberOf)."
::= { agLdapConfig 31 }
ldapCurCfgLoginAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..23))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LDAP login attribute."
::= { agLdapConfig 32 }
ldapNewCfgLoginAttribute OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..23))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LDAP login permission attribute (default=ibm-chassisRole)."
::= { agLdapConfig 33 }
ldapCurCfgBaseDN OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LDAP base DN name ."
::= { agLdapConfig 34 }
ldapNewCfgBaseDN OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LDAP base DN name."
::= { agLdapConfig 35 }
ldapCurCfgBindmode OBJECT-TYPE
SYNTAX INTEGER {
pre-config(1),
login(2),
sasl(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current LDAP bind mode:
login: use login creds for binding
pre-config: use binddn creds for binding
sasl: use SASL(Simple Authentication and Secure Layer) EXTERNAL"
::= { agLdapConfig 36 }
ldapNewCfgBindmode OBJECT-TYPE
SYNTAX INTEGER {
pre-config(1),
login(2),
sasl(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set LDAP bind mode:
login: use login creds for binding
pre-config: use binddn creds for binding
sasl: use SASL(Simple Authentication and Secure Layer) EXTERNAL"
::= { agLdapConfig 37 }
ldapCurCfgBindDNdn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current DN for binding with LDAP server (eg., cn=Manager,dc=my-domain,dc=com)."
::= { agLdapConfig 38 }
ldapNewCfgBindDNdn OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set DN for binding with LDAP server (eg., cn=Manager,dc=my-domain,dc=com)."
::= { agLdapConfig 39 }
ldapCurCfgBindDNekey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current encrypted password for the DN."
::= { agLdapConfig 40 }
ldapNewCfgBindDNekey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the encrypted password for the DN."
::= { agLdapConfig 41 }
ldapCurCfgBindDNkey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current password for DN."
::= { agLdapConfig 42 }
ldapNewCfgBindDNkey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the password for DN."
::= { agLdapConfig 43 }
ldapCurCfgGroupFilter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current LDAP group filter."
::= { agLdapConfig 44 }
ldapNewCfgGroupFilter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the LDAP group filter."
::= { agLdapConfig 45 }
ldapHostCurConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LdapHostCurConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for user specified host."
::= { agLdapConfig 46 }
ldapHostCurConfigTableEntry OBJECT-TYPE
SYNTAX LdapHostCurConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the user specified host table."
INDEX { ldapHostCurConfigIndex }
::= { ldapHostCurConfigTable 1 }
LdapHostCurConfigTableEntry ::= SEQUENCE {
ldapHostCurConfigIndex Integer32,
ldapHostCurAddr DisplayString (SIZE(0..127)),
ldapHostCurPort INTEGER
,ldapHostCurPortType INTEGER
}
ldapHostCurConfigIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the user specified host table."
::= { ldapHostCurConfigTableEntry 1 }
ldapHostCurAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the group addr."
::= { ldapHostCurConfigTableEntry 2 }
ldapHostCurPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the group port."
::= { ldapHostCurConfigTableEntry 3 }
ldapHostCurPortType OBJECT-TYPE
SYNTAX INTEGER {
data-port(0),
mgt-port(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specify the host port type.
data-port: Data port
mgt-port: Management port
"
::= { ldapHostCurConfigTableEntry 4 }
ldapHostNewConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LdapHostNewConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for user specified host."
::= { agLdapConfig 47 }
ldapHostNewConfigTableEntry OBJECT-TYPE
SYNTAX LdapHostNewConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the user specified host table."
INDEX { ldapHostNewConfigIndex }
::= { ldapHostNewConfigTable 1 }
LdapHostNewConfigTableEntry ::= SEQUENCE {
ldapHostNewConfigIndex Integer32,
ldapHostNewAddr DisplayString (SIZE(0..127)),
ldapHostNewPort INTEGER,
ldapHostNewPortType INTEGER,
ldapHostNewCfgDelete INTEGER
}
ldapHostNewConfigIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the user specified host table."
::= { ldapHostNewConfigTableEntry 1 }
ldapHostNewAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the group addr."
::= { ldapHostNewConfigTableEntry 2 }
ldapHostNewPort OBJECT-TYPE
SYNTAX INTEGER (1..65000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the host port."
::= { ldapHostNewConfigTableEntry 3 }
ldapHostNewPortType OBJECT-TYPE
SYNTAX INTEGER {
data-port(0),
mgt-port(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specify the host port type.
data-port: Data port
mgt-port: Management port
"
::= { ldapHostNewConfigTableEntry 4 }
ldapHostNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a host.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a host"
::= { ldapHostNewConfigTableEntry 5 }
ldapCurCfgMode OBJECT-TYPE
SYNTAX INTEGER {
legacy(0),
enhanced(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current LDAP mode:
legacy: legacy mode
enhanced: enhanced mode"
::= { agLdapConfig 48 }
ldapNewCfgMode OBJECT-TYPE
SYNTAX INTEGER {
legacy(0),
enhanced(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set LDAP mode:
legacy: set LDAP to legacy mode
enhanced: set LDAP to enhanced mode"
::= { agLdapConfig 49 }
ldapCurCfgSecuritymode OBJECT-TYPE
SYNTAX INTEGER {
clear(0),
starttls(1),
ldaps(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current LDAP transmit mode and security options:
clear: Cleartext mode
starttls: Secure LDAP via StartTLS operation w/o cleartext fallback
ldaps: Secure LDAP via LDAPS"
::= { agLdapConfig 50 }
ldapNewCfgSecuritymode OBJECT-TYPE
SYNTAX INTEGER {
clear(0),
starttls(1),
ldaps(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set LDAP transmit mode and security options:
clear: Cleartext mode
starttls: Secure LDAP via StartTLS operation w/o cleartext fallback
ldaps: Secure LDAP via LDAPS"
::= { agLdapConfig 51 }
ldapCurCfgMutual OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable mutual authentication in TLS."
::= { agLdapConfig 52}
ldapNewCfgMutual OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable mutual authentication in TLS."
::= { agLdapConfig 53}
ldapCurCfgSrv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable DNS SRV to get LDAP server."
::= { agLdapConfig 54}
ldapNewCfgSrv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable DNS SRV to get LDAP server."
::= { agLdapConfig 55 }
-- USB Copy
agUSBoperation OBJECT-TYPE
SYNTAX INTEGER {
fromUSB(1),
toUSB(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set operation:
fromUSB(1): from USB to Flash
toUSB(2): from Flash to USB"
::= { agUSBCopy 1 }
agUSBfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"USB filename (to copy from or to copy to)"
::= { agUSBCopy 2 }
agUSBflashFile OBJECT-TYPE
SYNTAX INTEGER {
boot(1),
image1(2),
active(3),
syslog(4),
crashdump(5),
image2(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set flash file involved (boot image, image 1,
active configuration, syslog, crashdump).
Syslog and crashdump can only be copied to USB.
(it is forbidden to copy from USB to flash) "
::= { agUSBCopy 3 }
agUSBcopyFile OBJECT-TYPE
SYNTAX INTEGER {
copy(1),
idle(2),
inprogress(3),
complete(4),
failed(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(1) indicates that there is no copy in progess.
complete(4) indicates that the last copy operation is completed.
Setting the value to copy(1), will execute the operation (copy
to or from USB stick).
If the copy is successful this variable will return the state
'complete' else it will return 'failed'.
Once the operation is completed, agUSBcopyFile should be set
back to 'idle' state so others can issue the copy command via SNMP."
::= { agUSBCopy 4 }
agUSBresult OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last USB Copy action result."
::= { agUSBCopy 5 }
csrCountryName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..3))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Country Code for the CSR (eg., US or UK)"
::= { agCSRConfig 1}
csrStateName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"State Name for the CSR (eg., California)"
::= { agCSRConfig 2}
csrCityName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"City Name for the CSR (eg., Santa Clara)"
::= { agCSRConfig 3}
csrOrganizationName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Organization Name for the CSR (eg., Lenovo)"
::= { agCSRConfig 4}
csrUnitName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Organization Unit Name for the CSR (eg., Engineering)"
::= { agCSRConfig 5}
csrCommonName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Common Name for the CSR (eg., www.lenovo.com)"
::= { agCSRConfig 6}
csrEmail OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Email for the CSR (eg., info@lenovo.com)"
::= { agCSRConfig 7}
csrGenerate OBJECT-TYPE
SYNTAX INTEGER {
generate(1),
complete(2),
inprogress(3),
failed(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
complete(2) indicates that the last CSR generatation operation
was completed.
inprogress(3) indicates that CSR is currently being generated.
failed(4) indicates that the previous CSR generated encountered some
error.
Setting this object to generate(1) generates the CSR based on the
information provided through the agCSR objects."
::= { agCSRConfig 8 }
-- Statistics Group
-- Packet Statistics Group
-- This group represents Packet Statistics information
pktStatsAllocs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack."
::= { pktStats 1 }
pktStatsFrees OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of times the packet buffers are freed(released) to the
packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 2 }
pktStatsAllocFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocation failures from the packet buffer
pool by the TCP/IP protocol stack."
::= { pktStats 3}
pktStatsMediums OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations with size greater than 128 bytes
and less than or equal to 1536 bytes from the packet buffer pool by
the TCP/IP protocol stack."
::= { pktStats 4}
pktStatsJumbos OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations with size larger than 1536 bytes
from the packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 5}
pktStatsSmalls OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations with size less than or eqaul to
128 bytes from the packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 6}
pktStatsMediumsHiWatermark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of packet allocations with size greater than
128 bytes and less than or equal to 1536 bytes from the packet
buffer pool by the TCP/IP protocol stack."
::= { pktStats 7}
pktStatsJumbosHiWatermark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of packet allocations with size larger than
1536 bytes from the packet buffer pool by the TCP/IP protocol stack."
::= { pktStats 8}
pktStatsSmallsHiWatermark OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of packet allocations with size less than or
equal to 128 bytes from the packet buffer pool by the TCP/IP
protocol stack."
::= { pktStats 9}
pktStatsDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets which were chosen to be discarded because
the number of buffers available in the packet buffer pool is low."
::= { pktStats 10}
--
-- Port statistics table
--
portStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port statistics."
::= { portStats 1 }
portStatsTableEntry OBJECT-TYPE
SYNTAX PortStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port stats table."
INDEX { portStatsIndx }
::= { portStatsTable 1 }
PortStatsTableEntry ::=
SEQUENCE {
portStatsIndx
PortNumber,
portStatsPhyIfInOctets
Counter32,
portStatsPhyIfInUcastPkts
Counter32,
portStatsPhyIfInNUcastPkts
Counter32,
portStatsPhyIfInDiscards
Counter32,
portStatsPhyIfInErrors
Counter32,
portStatsPhyIfInUnknownProtos
Counter32,
portStatsPhyIfOutOctets
Counter32,
portStatsPhyIfOutUcastPkts
Counter32,
portStatsPhyIfOutNUcastPkts
Counter32,
portStatsPhyIfOutDiscards
Counter32,
portStatsPhyIfOutErrors
Counter32,
portStatsPhyIfOutQLen
Gauge32,
portStatsPhyIfInBroadcastPkts
Counter32,
portStatsPhyIfOutBroadcastPkts
Counter32,
portStatsPhyIfInMulticastPkts
Counter32,
portStatsPhyIfOutMulticastPkts
Counter32,
portStatsClear
INTEGER
,portStatsLinkStateChange
Counter32
,portStatsPhyIfInFctlPkts
Counter32
,portStatsPhyIfOutFctlPkts
Counter32
,portStatsPhyIfInFctlPktsRate
Counter32
,portStatsPhyIfOutFctlPktsRate
Counter32
,portStatsPhyIfIngDiscdVlan
Counter32
,portStatsPhyIfIngDiscdEgrMap
Counter32
,portStatsPhyIfIngDiscdFilter
Counter32
,portStatsPhyIfIngDiscdPolicy
Counter32
,portStatsPhyIfIngDiscdNonFwdStat
Counter32
,portStatsPhyIfIngDiscdIbpCbp
Counter32
,portStatsDot1PortInFrames
Counter32
,portStatsDot1PortOutFrames
Counter32
,portStatsDot1PortInDiscards
Counter32
,portStatsDot1TpLearnedEntryDiscards
Counter32
,portStatsDot1StpPortForwardTransitions
Counter32
,portStatsPhyIfEgrHOLBlockDiscd
Counter32
,portStatsPhyIfEgrMMUDiscd
Counter32
,portStatsPhyIfEgrCellErrDiscd
Counter32
,portStatsPhyIfEgrMMUAgeDiscd
Counter32
,portStatsPhyIfEgrOtherDiscd
Counter32
,portStatsPortAlias
DisplayString
}
tcpControlBlocksTable OBJECT-TYPE
SYNTAX SEQUENCE OF TcpControlBlocksTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All TCP allocated control blocks "
::= { mpTcbStats 1 }
tcpControlBlocksTableEntry OBJECT-TYPE
SYNTAX TcpControlBlocksTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the TCP control blocks table. "
INDEX { tcpControlBlocksIndx }
::= { tcpControlBlocksTable 1 }
TcpControlBlocksTableEntry ::=
SEQUENCE {
tcpControlBlocksIndx
Integer32,
destAddr
DisplayString,
remotePort
Gauge32,
sourceAddr
DisplayString,
localPort
Gauge32,
portType
DisplayString,
portState
DisplayString,
state
DisplayString
}
tcpControlBlocksIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP blocks index."
::= { tcpControlBlocksTableEntry 1 }
destAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP block destination address."
::= { tcpControlBlocksTableEntry 2 }
remotePort OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tcp informations concerning the remote port"
::= { tcpControlBlocksTableEntry 3}
sourceAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the source of the Tcp block"
::= { tcpControlBlocksTableEntry 4}
localPort OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tcp informations concerning the local port"
::= { tcpControlBlocksTableEntry 5}
portType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the local port"
::= { tcpControlBlocksTableEntry 7 }
portState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The state of the local port"
::= { tcpControlBlocksTableEntry 8 }
state OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Tcp"
::= { tcpControlBlocksTableEntry 6 }
tcpMGMTControlBlocksTable OBJECT-TYPE
SYNTAX SEQUENCE OF TcpMGMTTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All TCP allocated control blocks on MGMT port"
::= { mpTcbStats 2 }
tcpMGMTTableEntry OBJECT-TYPE
SYNTAX TcpMGMTTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A row in the TCP on MGMT port table. "
INDEX { tcpMGMTIndx }
::= { tcpMGMTControlBlocksTable 1 }
TcpMGMTTableEntry ::=
SEQUENCE {
tcpMGMTIndx
Integer32,
recvQ
Integer32,
sentQ
Integer32,
localAddress
DisplayString,
foreignAddress
DisplayString,
stateMgmt
DisplayString
}
tcpMGMTIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Index in the tcpMGMTControlBlocksTable table."
::= { tcpMGMTTableEntry 1 }
recvQ OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the received TCP queue."
::= { tcpMGMTTableEntry 2 }
sentQ OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the sent TCP blocks queue."
::= { tcpMGMTTableEntry 3 }
localAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local address for the TCP."
::= { tcpMGMTTableEntry 4 }
foreignAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote address for the TCP."
::= { tcpMGMTTableEntry 5 }
stateMgmt OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's state."
::= { tcpMGMTTableEntry 6 }
udpControlBlocksTable OBJECT-TYPE
SYNTAX SEQUENCE OF UdpControlBlocksTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All UDP control blocks in use"
::= { mpUdpStats 1 }
udpControlBlocksTableEntry OBJECT-TYPE
SYNTAX UdpControlBlocksTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the UDP control blocks table. "
INDEX { udpMpLocalPort }
::= { udpControlBlocksTable 1 }
UdpControlBlocksTableEntry ::=
SEQUENCE {
udpMpLocalPort
Integer32,
udpMpState
DisplayString
}
udpMpLocalPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current UDP local port."
::= { udpControlBlocksTableEntry 1 }
udpMpState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The port's state. "
::= { udpControlBlocksTableEntry 2 }
udpMGMTControlBlocksTable OBJECT-TYPE
SYNTAX SEQUENCE OF UdpMGMTTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All UDP control blocks allocated on MGMT port"
::= { mpUdpStats 2 }
udpMGMTTableEntry OBJECT-TYPE
SYNTAX UdpMGMTTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" A row in the UDP on MGMT port table. "
INDEX { udpMGMTIndx }
::= { udpMGMTControlBlocksTable 1 }
UdpMGMTTableEntry ::=
SEQUENCE {
udpMGMTIndx
Integer32,
recvQUdp
Integer32,
sentQUdp
Integer32,
localAddressUdp
DisplayString,
foreignAddressUdp
DisplayString,
stateMgmtUdp
DisplayString
}
udpMGMTIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Index in the udpMGMTControlBlocksTable table."
::= { udpMGMTTableEntry 1 }
recvQUdp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the received UDP queue."
::= { udpMGMTTableEntry 2 }
sentQUdp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the sent UDP blocks queue."
::= { udpMGMTTableEntry 3 }
localAddressUdp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local address for the UDP."
::= { udpMGMTTableEntry 4 }
foreignAddressUdp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote address for the UDP."
::= { udpMGMTTableEntry 5 }
stateMgmtUdp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's state."
::= { udpMGMTTableEntry 6 }
portStatsIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { portStatsTableEntry 1 }
portStatsPhyIfInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on the
interface, including framing characters."
::= { portStatsTableEntry 2 }
portStatsPhyIfInUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of subnetwork-unicast packets
delivered to a higher-layer protocol."
::= { portStatsTableEntry 3 }
portStatsPhyIfInNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol."
::= { portStatsTableEntry 4 }
portStatsPhyIfInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space."
::= { portStatsTableEntry 5 }
portStatsPhyIfInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::= { portStatsTableEntry 6 }
portStatsPhyIfInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol."
::= { portStatsTableEntry 7 }
portStatsPhyIfOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted out of the
interface, including framing characters."
::= { portStatsTableEntry 8 }
portStatsPhyIfOutUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent."
::= { portStatsTableEntry 9 }
portStatsPhyIfOutNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent."
::= { portStatsTableEntry 10 }
portStatsPhyIfOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space."
::= { portStatsTableEntry 11 }
portStatsPhyIfOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets that could not be
transmitted because of errors."
::= { portStatsTableEntry 12 }
portStatsPhyIfOutQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the output packet queue (in
packets)."
::= { portStatsTableEntry 13 }
portStatsPhyIfInBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer."
::= { portStatsTableEntry 14 }
portStatsPhyIfOutBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent."
::= { portStatsTableEntry 15 }
portStatsPhyIfInMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer."
::= { portStatsTableEntry 17 }
portStatsPhyIfOutMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent."
::= { portStatsTableEntry 18 }
portStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for this port."
::= { portStatsTableEntry 16 }
portStatsLinkStateChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of link state changes."
::= { portStatsTableEntry 20 }
portStatsPhyIfInFctlPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound flow control packets."
::= { portStatsTableEntry 21 }
portStatsPhyIfOutFctlPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound flow control packets."
::= { portStatsTableEntry 22 }
portStatsPhyIfInFctlPktsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound flow control packets per second."
::= { portStatsTableEntry 23 }
portStatsPhyIfOutFctlPktsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound flow control packets per second."
::= { portStatsTableEntry 24 }
portStatsPhyIfIngDiscdVlan OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, discarded because of VLAN."
::= { portStatsTableEntry 25 }
portStatsPhyIfIngDiscdEgrMap OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, discarded because of empty egress portmap."
::= { portStatsTableEntry 26 }
portStatsPhyIfIngDiscdFilter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, discarded because of filter."
::= { portStatsTableEntry 27 }
portStatsPhyIfIngDiscdPolicy OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, discarded because of policy."
::= { portStatsTableEntry 28 }
portStatsPhyIfIngDiscdNonFwdStat OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, discarded because of Non-Forwarding State."
::= { portStatsTableEntry 29 }
portStatsPhyIfIngDiscdIbpCbp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets discarded because of IBP/CBP."
::= { portStatsTableEntry 30 }
portStatsDot1PortInFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IN frames per port."
::= { portStatsTableEntry 31 }
portStatsDot1PortOutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of OUT frames per port."
::= { portStatsTableEntry 32 }
portStatsDot1PortInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IN packets discarded per port."
::= { portStatsTableEntry 33 }
portStatsDot1TpLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Dot1Tp learned entries discarded."
::= { portStatsTableEntry 34 }
portStatsDot1StpPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transitions ...."
::= { portStatsTableEntry 35 }
portQoSCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortQoSCounterTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table for QoS counters."
::= { portStats 9 }
portQoSCounterTableEntry OBJECT-TYPE
SYNTAX PortQoSCounterTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port QoS table."
INDEX { portQoSIndex, queueQoSIndex }
::= { portQoSCounterTable 1 }
PortQoSCounterTableEntry ::= SEQUENCE {
portQoSIndex PortNumber,
queueQoSIndex Integer32,
txPackets Counter64,
droppedPackets Counter64,
txBytes Counter64,
droppedBytes Counter64,
txPacketsRate Counter64,
droppedPacketsRate Counter64,
txBytesRate Counter64,
droppedBytesRate Counter64
,portAlias DisplayString
}
portQoSIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port"
::= { portQoSCounterTableEntry 1 }
queueQoSIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the queue per port."
::= { portQoSCounterTableEntry 2 }
txPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total Tx packets."
::= { portQoSCounterTableEntry 3 }
droppedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dropped packets."
::= { portQoSCounterTableEntry 4 }
txBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total Tx bytes."
::= { portQoSCounterTableEntry 5 }
droppedBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dropped bytes."
::= { portQoSCounterTableEntry 6 }
txPacketsRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Tx packets rate."
::= { portQoSCounterTableEntry 7 }
droppedPacketsRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dropped packets rate."
::= { portQoSCounterTableEntry 8 }
txBytesRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Tx bytes rate."
::= { portQoSCounterTableEntry 9 }
droppedBytesRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The dropped bytes rate."
::= { portQoSCounterTableEntry 10 }
portAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { portQoSCounterTableEntry 11 }
portStatsPhyIfEgrHOLBlockDiscd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, discarded because of HOL Blocking."
::= { portStatsTableEntry 36 }
portStatsPhyIfEgrMMUDiscd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, discarded by MMU because of zero port bitmap."
::= { portStatsTableEntry 37 }
portStatsPhyIfEgrCellErrDiscd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, discarded because of Cell Errors or purging."
::= { portStatsTableEntry 38 }
portStatsPhyIfEgrMMUAgeDiscd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, discarded because of MMU Aging. Applicable in
10/100 mode, incremented for frames aborted which were deferred for an
excessive period of time."
::= { portStatsTableEntry 39 }
portStatsPhyIfEgrOtherDiscd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, discarded because of Other reasons."
::= { portStatsTableEntry 40 }
portStatsPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { portStatsTableEntry 41 }
portMgmtStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortMgmtStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port statistics."
::= { portStats 3 }
portMgmtStatsTableEntry OBJECT-TYPE
SYNTAX PortMgmtStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the management port stats table."
INDEX { portMgmtStatsIndx }
::= { portMgmtStatsTable 1 }
PortMgmtStatsTableEntry ::=
SEQUENCE {
portMgmtStatsIndx
Integer32,
portMgmtStatsRxBytes
Counter32,
portMgmtStatsTxBytes
Counter32,
portMgmtStatsRxpackets
Counter32,
portMgmtStatsTxpackets
Counter32,
portMgmtStatsRxErrors
Counter32,
portMgmtStatsTxErrors
Counter32,
portMgmtStatsRxDropped
Counter32,
portMgmtStatsTxDropped
Counter32,
portMgmtStatsRxOverruns
Counter32,
portMgmtStatsTxOverruns
Counter32,
portMgmtStatsRxFrame
Counter32,
portMgmtStatsTxCarrier
Counter32,
portMgmtStatsRxMulticast
Counter32,
portMgmtStatsTxCollisions
Counter32
,portMgmtStatsPortAlias
DisplayString
}
portMgmtStatsIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management port index."
::= { portMgmtStatsTableEntry 1 }
portMgmtStatsRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes received."
::= { portMgmtStatsTableEntry 2 }
portMgmtStatsTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bytes transmitted."
::= { portMgmtStatsTableEntry 3 }
portMgmtStatsRxpackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack."
::= { portMgmtStatsTableEntry 4 }
portMgmtStatsTxpackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack."
::= { portMgmtStatsTableEntry 5 }
portMgmtStatsRxErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::= { portMgmtStatsTableEntry 6 }
portMgmtStatsTxErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol."
::= { portMgmtStatsTableEntry 7 }
portMgmtStatsRxDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inbound packets that were dropped."
::= { portMgmtStatsTableEntry 8 }
portMgmtStatsTxDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound packets that were dropped."
::= { portMgmtStatsTableEntry 9 }
portMgmtStatsRxOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of data overruns over this link."
::= { portMgmtStatsTableEntry 10 }
portMgmtStatsTxOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of data overruns over this link."
::= { portMgmtStatsTableEntry 11 }
portMgmtStatsRxFrame OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received on this link."
::= { portMgmtStatsTableEntry 12 }
portMgmtStatsTxCarrier OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a this
interface."
::= { portMgmtStatsTableEntry 13 }
portMgmtStatsRxMulticast OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast packets received."
::= { portMgmtStatsTableEntry 14 }
portMgmtStatsTxCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of collisions on this outbound segment."
::= { portMgmtStatsTableEntry 15 }
portMgmtStatsPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { portMgmtStatsTableEntry 16 }
allportsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AllportsStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of all ports statistics."
::= { portStats 4 }
allportsStatsTableEntry OBJECT-TYPE
SYNTAX AllportsStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table of all ports statistics."
INDEX { allportsStatsIndx }
::= { allportsStatsTable 1 }
AllportsStatsTableEntry ::=
SEQUENCE {
allportsStatsIndx PortNumber,
allportsStatsDescr DisplayString,
allportsStatsSpeed INTEGER,
allportsStatsPhysAddress PhysAddress,
allportsStatsAdminStatus INTEGER,
allportsStatsOperStatus INTEGER,
allportsStatsInOctets Counter32,
allportsStatsOutOctets Counter32,
allportsStatsInPkts Counter32,
allportsStatsOutPkts Counter32,
allportsStatsInUcast DisplayString,
allportsStatsOutUcast DisplayString,
allportsStatsInBcast DisplayString,
allportsStatsOutBcast DisplayString,
allportsStatsInMcast DisplayString,
allportsStatsOutMcast DisplayString,
allportsStatsInDiscards Counter32,
allportsStatsOutDiscards Counter32,
allportsStatsInErrors Counter32,
allportsStatsOutErrors Counter32,
allportsStatsInUnknownProtos DisplayString,
allportsStatsOutQLen DisplayString
,
allportsStatsipInReceives Counter32,
allportsStatsipInHeaderErrors Counter32,
allportsStatsipInDiscards Counter32
,
allportsStatsipInReceivesRate Counter32,
allportsStatsipInHeaderErrorsRate Counter32,
allportsStatsipInDiscardsRate Counter32
,
allportsStatsLinkStateChange Counter32
,
allportsStatsInOctetsRate Counter32,
allportsStatsOutOctetsRate Counter32,
allportsStatsInUcastRate DisplayString,
allportsStatsOutUcastRate DisplayString,
allportsStatsInBcastRate DisplayString,
allportsStatsOutBcastRate DisplayString,
allportsStatsInMcastRate DisplayString,
allportsStatsOutMcastRate DisplayString,
allportsStatsInDiscardsRate Counter32,
allportsStatsOutDiscardsRate Counter32,
allportsStatsInErrorsRate Counter32,
allportsStatsOutErrorsRate Counter32
,allportsStatsPortAlias DisplayString
}
allportsStatsIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number."
::= { allportsStatsTableEntry 1 }
allportsStatsDescr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port description."
::= { allportsStatsTableEntry 2 }
allportsStatsSpeed OBJECT-TYPE
SYNTAX INTEGER {
mbs10(2),
mbs100(3),
mbs1000(4),
any(5)
,
mbs10000(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational speed of the port."
::= { allportsStatsTableEntry 3 }
allportsStatsPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port MAC Address."
::= { allportsStatsTableEntry 4 }
allportsStatsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port Admin state."
::= { allportsStatsTableEntry 5 }
allportsStatsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port Operational Status."
::= { allportsStatsTableEntry 6 }
allportsStatsInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Octets In for port."
::= { allportsStatsTableEntry 7 }
allportsStatsOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Octets Out for port."
::= { allportsStatsTableEntry 8 }
allportsStatsInPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets In for port."
::= { allportsStatsTableEntry 9 }
allportsStatsOutPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packets Out for port."
::= { allportsStatsTableEntry 10 }
allportsStatsInUcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Packets In for port."
::= { allportsStatsTableEntry 11 }
allportsStatsOutUcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Packets Out for port."
::= { allportsStatsTableEntry 12 }
allportsStatsInBcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcasts Packets In for port."
::= { allportsStatsTableEntry 13 }
allportsStatsOutBcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcasts Packets Out for port."
::= { allportsStatsTableEntry 14 }
allportsStatsInMcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Packets In for port."
::= { allportsStatsTableEntry 15 }
allportsStatsOutMcast OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Packets Out for port."
::= { allportsStatsTableEntry 16 }
allportsStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded Packets for port."
::= { allportsStatsTableEntry 17 }
allportsStatsOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound Packets for port."
::= { allportsStatsTableEntry 18 }
allportsStatsInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error Packets for port."
::= { allportsStatsTableEntry 19 }
allportsStatsOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Not sent packets due to error."
::= { allportsStatsTableEntry 20 }
allportsStatsInUnknownProtos OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unknown protocol packets."
::= { allportsStatsTableEntry 21 }
allportsStatsOutQLen OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outbound Packet Queue Length."
::= { allportsStatsTableEntry 22 }
allportsStatsipInReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip In Receives."
::= { allportsStatsTableEntry 23 }
allportsStatsipInHeaderErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip In Header Errors."
::= { allportsStatsTableEntry 24 }
allportsStatsipInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip In Discards."
::= { allportsStatsTableEntry 25 }
allportsStatsLinkStateChange OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of link state changes."
::= { allportsStatsTableEntry 26 }
allportsStatsipInReceivesRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip In Receives rate."
::= { allportsStatsTableEntry 27 }
allportsStatsipInHeaderErrorsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip In Header Errors rate."
::= { allportsStatsTableEntry 28 }
allportsStatsipInDiscardsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip In Discards rate."
::= { allportsStatsTableEntry 29 }
allportsStatsInOctetsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Octets In rate for port."
::= { allportsStatsTableEntry 30 }
allportsStatsOutOctetsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Octets Out rate for port."
::= { allportsStatsTableEntry 31 }
allportsStatsInUcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Packets In rate for port."
::= { allportsStatsTableEntry 32 }
allportsStatsOutUcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unicast Packets Out rate for port."
::= { allportsStatsTableEntry 33 }
allportsStatsInBcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcasts Packets In rate for port."
::= { allportsStatsTableEntry 34 }
allportsStatsOutBcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Broadcasts Packets Out rate for port."
::= { allportsStatsTableEntry 35 }
allportsStatsInMcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Packets In rate for port."
::= { allportsStatsTableEntry 36 }
allportsStatsOutMcastRate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multicast Packets Out rate for port."
::= { allportsStatsTableEntry 37 }
allportsStatsInDiscardsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded In Packets rate for port."
::= { allportsStatsTableEntry 38 }
allportsStatsOutDiscardsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Discarded Out Packets rate for port."
::= { allportsStatsTableEntry 39 }
allportsStatsInErrorsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Erroneus inbound packets rate for port."
::= { allportsStatsTableEntry 40 }
allportsStatsOutErrorsRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Not sent packets due to error rate."
::= { allportsStatsTableEntry 41 }
allportsStatsPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { allportsStatsTableEntry 42 }
clearPortsStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the statistics for all ports."
::= { portStats 6 }
dot1RateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1RateStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of bridging statistics per second."
::= { portStats 7}
dot1RateStatsTableEntry OBJECT-TYPE
SYNTAX Dot1RateStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bridging statistics per second."
INDEX { dot1RateStatsIndx }
::= { dot1RateStatsTable 1 }
Dot1RateStatsTableEntry ::= SEQUENCE {
dot1RateStatsIndx PortNumber,
dot1RatePortInFrames Counter32,
dot1RatePortOutFrames Counter32,
dot1RatePortInDiscards Counter32,
dot1RateTpLearnedEntryDiscards Counter32
,dot1RateStpPortForwardTransitions Counter32
,dot1RatePortAlias DisplayString
}
dot1RateStatsIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { dot1RateStatsTableEntry 1 }
dot1RatePortInFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that have been received
per second by this port from its segment."
::= { dot1RateStatsTableEntry 2 }
dot1RatePortOutFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that have been transmitted
per second by this port to its segment."
::= { dot1RateStatsTableEntry 3 }
dot1RatePortInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of valid frames received which were
discarded per second."
::= { dot1RateStatsTableEntry 4 }
dot1RateTpLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number per second of Forwarding Database
entries, which have been or would have been
learnt, but have been discarded due to a lack
of space to store them."
::= { dot1RateStatsTableEntry 5 }
dot1RateStpPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
per second from the Learning state to the
Forwarding state."
::= { dot1RateStatsTableEntry 8 }
dot1RatePortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { dot1RateStatsTableEntry 9 }
dot3RateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3RateStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Ethernet statistics per second."
::= { portStats 8}
dot3RateStatsTableEntry OBJECT-TYPE
SYNTAX Dot3RateStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ethernet statistics per second."
INDEX { dot3RateStatsIndx }
::= { dot3RateStatsTable 1 }
Dot3RateStatsTableEntry ::= SEQUENCE {
dot3RateStatsIndx PortNumber,
dot3RateStatsAlignmentErrors Counter32,
dot3RateStatsFCSErrors Counter32,
dot3RateStatsSingleCollisionFrames Counter32,
dot3RateStatsMultipleCollisionFrames Counter32,
dot3RateStatsLateCollisions Counter32,
dot3RateStatsExcessiveCollisions Counter32,
dot3RateStatsInternalMacTransmitErrors Counter32,
dot3RateStatsFrameTooLongs Counter32,
dot3RateStatsInternalMacReceiveErrors Counter32
,dot3RatePortAlias DisplayString
}
dot3RateStatsIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { dot3RateStatsTableEntry 1 }
dot3RateStatsAlignmentErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received per second on a particular
interface that are not an integral number of octets
in length and do not pass the FCS check."
::= { dot3RateStatsTableEntry 2 }
dot3RateStatsFCSErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames received per second on a particular
interface that are an integral number of octets
in length but do not pass the FCS check."
::= { dot3RateStatsTableEntry 3 }
dot3RateStatsSingleCollisionFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by exactly one collision."
::= { dot3RateStatsTableEntry 4 }
dot3RateStatsMultipleCollisionFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of successfully transmitted frames per second
on a particular interface for which transmission is
inhibited by more than one collision."
::= { dot3RateStatsTableEntry 5 }
dot3RateStatsLateCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times per second that a collision
is detected on a particular interface later than
512 bit-times into the transmission of a packet."
::= { dot3RateStatsTableEntry 8 }
dot3RateStatsExcessiveCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count per second of frames for which
transmission on a particular interface fails
due to excessive collisions."
::= { dot3RateStatsTableEntry 9 }
dot3RateStatsInternalMacTransmitErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count per second of frames for which transmission
on a particular interface fails due to an internal
MAC sublayer transmit error."
::= { dot3RateStatsTableEntry 10 }
dot3RateStatsFrameTooLongs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count per second of frames received on a particular
interface that exceed the maximum permitted frame size."
::= { dot3RateStatsTableEntry 12 }
dot3RateStatsInternalMacReceiveErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count per second of frames for which reception on
a particular interface fails due to an internal MAC
sublayer receive error."
::= { dot3RateStatsTableEntry 13 }
dot3RatePortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { dot3RateStatsTableEntry 14 }
-- NTP Statisitics
ntpPrimaryServerReqSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP requests sent to Primary NTP Server."
::= { ntpStats 1 }
ntpPrimaryServerRespRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP responces received from Primary NTP Server."
::= { ntpStats 2 }
ntpPrimaryServerUpdates OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP Updates by Primary NTP Server."
::= { ntpStats 3 }
ntpSecondaryServerReqSent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP requests sent to Secondary NTP Server."
::= { ntpStats 4 }
ntpSecondaryServerRespRcvd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP responces received from Secondary NTP Server."
::= { ntpStats 5 }
ntpSecondaryServerUpdates OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTP Updates by Secondary NTP Server."
::= { ntpStats 6 }
ntpLastUpdateServer OBJECT-TYPE
SYNTAX INTEGER {
none(0),
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of ntp server updated last time."
::= { ntpStats 7 }
ntpLastUpdateTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time updated by ntp server."
::= { ntpStats 8 }
ntpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for ntp."
::= { ntpStats 9 }
ntpSystemCurrentTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current system time."
::= { ntpStats 10 }
aclStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ACL statistics."
::= { aclStats 1 }
aclStatsTableEntry OBJECT-TYPE
SYNTAX AclStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about a particular ACL configuration entry."
INDEX { aclStatsIndex }
::= { aclStatsTable 1 }
AclStatsTableEntry ::= SEQUENCE {
aclStatsIndex Integer32,
aclStatsHits Counter32,
aclClearStats INTEGER
}
aclStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acl index."
::= { aclStatsTableEntry 1 }
aclStatsHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of hits for this ACL entry"
::= { aclStatsTableEntry 2 }
aclClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for the ACL."
::= { aclStatsTableEntry 3 }
acl6StatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Acl6StatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IPv6 ACL statistics."
::= { aclStats 3 }
acl6StatsTableEntry OBJECT-TYPE
SYNTAX Acl6StatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about a particular IPv6 ACL configuration entry."
INDEX { aclStatsIndex }
::= { acl6StatsTable 1 }
Acl6StatsTableEntry ::= SEQUENCE {
acl6StatsIndex Integer32,
acl6StatsHits Counter32,
acl6ClearStats INTEGER
}
acl6StatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv6 acl index."
::= { acl6StatsTableEntry 1 }
acl6StatsHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of hits for this IPv6 ACL entry"
::= { acl6StatsTableEntry 2 }
acl6ClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for the IPv6 ACL."
::= { acl6StatsTableEntry 3 }
-- Clear Statistics
snmpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the SNMP statistics."
::= { agClearStats 1 }
agDiffState OBJECT-TYPE
SYNTAX INTEGER {
diff(1),
flashdiff(2),
idle(3),
inprogress(4),
complete(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(3) indicates that there is no diff in progess.
complete(5) indicates that the last diff operation is completed.
Setting the value to diff(1), will start a new diff operation
Diff compares the new configuration with the current configuration
and shows the pending configuration changes.
Setting the value to flashdiff(1), will start a new diff operation.
flashdiff compares new configuration with the flash configuration.
To read the configuration changes use the agDiffTable once the
state of this variable returns complete.
Once the agDiffTable is read the state should be set back to 'idle'
which frees the diff buffer and others can issue a diff command via
SNMP."
::= { agDiff 2 }
agDiffTableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of strings in the diff table."
::= { agDiff 3 }
agDiffTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgDiffTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of diff strings."
::= { agDiff 4 }
agDiffTableEntry OBJECT-TYPE
SYNTAX AgDiffTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the diff table."
INDEX { agDiffIndex }
::= { agDiffTable 1 }
AgDiffTableEntry ::= SEQUENCE {
agDiffIndex Integer32,
agDiffString OCTET STRING
}
agDiffIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index."
::= { agDiffTableEntry 1 }
agDiffString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string in the diff table."
::= { agDiffTableEntry 2 }
-- Config Dump
agCfgDumpState OBJECT-TYPE
SYNTAX INTEGER {
dump(1),
idle(2),
inprogress(3),
complete(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this object is read the current state is returned.
idle(2) indicates that there is no dump in progess.
complete(4) indicates that the last dump operation is completed.
Setting the value to dump(1), will start a new dump operation
Dump will show the current configuration.
To read the configuration dump use the agCfgDumpTable once the
state of this variable returns complete.
Once the agCfgDumpTable is read the state should be set back to
'idle' which frees the dump buffer and others can issue a dump
command via SNMP."
::= { agCfgDump 2 }
agCfgDumpTableSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of strings in the dump table."
::= { agCfgDump 3 }
agCfgDumpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgCfgDumpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of dump strings."
::= { agCfgDump 4 }
agCfgDumpTableEntry OBJECT-TYPE
SYNTAX AgCfgDumpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the dump table."
INDEX { agCfgDumpIndex }
::= { agCfgDumpTable 1 }
AgCfgDumpTableEntry ::= SEQUENCE {
agCfgDumpIndex Integer32,
agCfgDumpString OCTET STRING
}
agCfgDumpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index."
::= { agCfgDumpTableEntry 1 }
agCfgDumpString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string in the dump table."
::= { agCfgDumpTableEntry 2 }
-- GeaPort Information
geaportInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GeaportInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of gea port mapping."
::= { geaportInfo 1 }
geaportInfoTableEntry OBJECT-TYPE
SYNTAX GeaportInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the geaport table mapping."
INDEX { geaportInfoLogicalIndex }
::= { geaportInfoTable 1 }
GeaportInfoTableEntry ::= SEQUENCE {
geaportInfoLogicalIndex PortNumber,
geaportInfoAlias DisplayString,
geaportInfoPort INTEGER,
geaportInfoUnit INTEGER
}
geaportInfoLogicalIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The logical port index."
::= { geaportInfoTableEntry 1 }
geaportInfoAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GEA Port Alias."
::= { geaportInfoTableEntry 2 }
geaportInfoPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GEA Port (0-based)."
::= { geaportInfoTableEntry 3 }
geaportInfoUnit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The GEA Unit."
::= { geaportInfoTableEntry 4 }
-- SFP Information
sfpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of external port SFP information."
::= { sfpInfo 1 }
sfpInfoTableEntry OBJECT-TYPE
SYNTAX SfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the external port SFP information table."
INDEX { sfpInfoIndx }
::= { sfpInfoTable 1 }
SfpInfoTableEntry ::= SEQUENCE {
sfpInfoIndx PortNumber,
sfpInfoPortAlias DisplayString,
sfpInfoDevice DisplayString,
sfpInfoTXEnable INTEGER,
sfpInfoRXSignal INTEGER,
sfpInfoTXFault INTEGER,
sfpInfoApproved INTEGER,
sfpInfoVendor DisplayString,
sfpInfoSerial DisplayString
}
sfpInfoIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The external port SFX index."
::= { sfpInfoTableEntry 1 }
sfpInfoPortAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP alias."
::= { sfpInfoTableEntry 2 }
sfpInfoDevice OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP Device."
::= { sfpInfoTableEntry 3 }
sfpInfoTXEnable OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
enabled (2),
disabled (3)
, notAvailable (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP TX-Enable."
::= { sfpInfoTableEntry 4 }
sfpInfoRXSignal OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
down (2),
link (3),
notAvailable (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP RX-Signal."
::= { sfpInfoTableEntry 5 }
sfpInfoTXFault OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
fault (2),
none (3),
notAvailable (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP TX-Fault."
::= { sfpInfoTableEntry 6 }
sfpInfoApproved OBJECT-TYPE
SYNTAX INTEGER {
notInstalled (1),
notApproved (2),
sfpApproved (3)
,sfpAccepted (5)
,sfpRestrict (6)
,sfpUnsupprt (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP Approval."
::= { sfpInfoTableEntry 7 }
sfpInfoVendor OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP device vendor."
::= { sfpInfoTableEntry 8 }
sfpInfoSerial OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External Port SFP/XFP device serial."
::= { sfpInfoTableEntry 9 }
accessInfoClearAllUserFailAttempts OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action Object. When set to clear(2),clears all the unsuccessful
attempts of users. Otherwise nothing is done.
ok(1) is returned always when read."
::= { accessInfo 1 }
accessInfoClearAllUserLocks OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action Object. When set to clear(2), Unlock all locked users.
Otherwise nothing is done. ok(1) is returned always when read."
::= { accessInfo 2 }
accessUserInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccessUserInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of user information."
::= { accessInfo 3 }
accessUserInfoTableEntry OBJECT-TYPE
SYNTAX AccessUserInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the user information table."
INDEX { accessUserInfoIndex}
::= { accessUserInfoTable 1 }
AccessUserInfoTableEntry ::= SEQUENCE {
accessUserInfoIndex Integer32,
accessUserInfoLockState INTEGER,
accessUserInfoClearFailAttempts INTEGER,
accessUserInfoClearLock INTEGER
}
accessUserInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index. The index value corresponds to the same value
of agAccessUserCurCfgUId for the user."
::= { accessUserInfoTableEntry 1 }
accessUserInfoLockState OBJECT-TYPE
SYNTAX INTEGER {
unlocked(1),
locked(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lock State of a specific user, unlocked(1) or locked(2).
When the state is locked the user is not allowed to login
until the account is unlocked by the administrator."
::= { accessUserInfoTableEntry 2 }
accessUserInfoClearFailAttempts OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action Object. When set to clear(2), clears
the unsuccessful attempts of a particular user.
Otherwise nothing is done.
ok(1) is returned always when read."
::= { accessUserInfoTableEntry 3 }
accessUserInfoClearLock OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action Object. When set to clear(2), unlock a particular user.
Otherwise nothing is done.
ok(1) is returned always when read."
::= { accessUserInfoTableEntry 4 }
-- endif /* defined(WEB_UI) */
-- ----------------------------------------------------------------------------
-- { INSERT: hardware
-- ----------------------------------------------------------------------------
-- Hardware Information
hwPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware part number of the Switch.
"
::= { hardware 1 }
hwFanStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fan status on the system.
"
::= { hardware 12 }
hwFanSpeed OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fan speed on the system.
"
::= { hardware 13 }
hwTempSensors OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensors on the system.
"
::= { hardware 14 }
hwGlobalHealthStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
noncritical(2),
critical(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This variable summarizes the statuses of several key elements of the device.
OK:
- All temperature sensors are below the warning threshold (eg. < 85 C);
- All fans are running at >= 100 RPMs;
- Both power supplies are on;
- No panic dump exists in flash.
Non-critical:
- One or more temperature sensors is in the warning range (eg. >= 85 and < 100 C);
- A panic dump exists in flash.
Critical:
- One or more temperature sensors is in the failure range (eg. >= 100 C);
- One or more fans are running < 100 RPM;
- One power supply is off.
"
::= { hardware 15 }
hwESN OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ESN of the switch.
"
::= { hardware 40 }
hwMTM OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..9))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Machine Type Model (MTM) of the system"
::= { hardware 42 }
-- MP CPU Statistics Group
mpCpuStatsUtil1Second OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 second. It shows the percentage. It is deprecated."
::= { mpCpuStats 1 }
mpCpuStatsUtil5Seconds OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 seconds. It shows the percentage. It is deprecated."
::= { mpCpuStats 2 }
mpCpuStatsUtil1Minute OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 minute. It shows the percentage. It is deprecated."
::= { mpCpuStats 3 }
mpCpuStatsUtil5Minutes OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 minutes. It shows the percentage. It is deprecated."
::= { mpCpuStats 6 }
mpCpuStatsUtil1SecondRev OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 second. It shows the percentage.
"
::= { mpCpuStats 7 }
mpCpuStatsUtil5SecondsRev OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 seconds. It shows the percentage.
"
::= { mpCpuStats 8 }
mpCpuStatsUtil1MinuteRev OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 minute. It shows the percentage.
"
::= { mpCpuStats 9 }
mpCpuStatsUtil5MinutesRev OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 minutes. It shows the percentage.
"
::= { mpCpuStats 10 }
-- Stats for per thread CPU utilization
cpuUtilProcessStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuUtilProcessStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CPU utilization per process statistics. It is deprecated."
::= { mpCpuStats 5 }
cpuUtilProcessStatsTableEntry OBJECT-TYPE
SYNTAX CpuUtilProcessStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the CPU utilization stats per process table. It is deprecated."
INDEX { processId }
::= { cpuUtilProcessStatsTable 1 }
CpuUtilProcessStatsTableEntry ::=
SEQUENCE {
processId Integer32,
processName DisplayString,
cpuProcessUtil1Sec DisplayString,
cpuProcessUtil5Sec DisplayString,
cpuProcessUtil1Min DisplayString,
cpuProcessUtil5Min DisplayString,
processStatus DisplayString
}
processId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The process ID."
::= { cpuUtilProcessStatsTableEntry 1 }
processName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Process Name."
::= { cpuUtilProcessStatsTableEntry 2 }
cpuProcessUtil1Sec OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 second.
It shows the percentage."
::= { cpuUtilProcessStatsTableEntry 3 }
cpuProcessUtil5Sec OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 seconds.
It shows the percentage."
::= { cpuUtilProcessStatsTableEntry 4 }
cpuProcessUtil1Min OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 min.
It shows the percentage."
::= { cpuUtilProcessStatsTableEntry 5 }
cpuProcessUtil5Min OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 min.
It shows the percentage."
::= { cpuUtilProcessStatsTableEntry 6 }
processStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Process Status"
::= { cpuUtilProcessStatsTableEntry 7 }
cpuUtilProcessStatsRevTable OBJECT-TYPE
SYNTAX SEQUENCE OF CpuUtilProcessStatsRevTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CPU utilization per process statistics.
"
::= { mpCpuStats 11 }
cpuUtilProcessStatsRevTableEntry OBJECT-TYPE
SYNTAX CpuUtilProcessStatsRevTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the CPU utilization stats per process table.
"
INDEX { processIdRev }
::= { cpuUtilProcessStatsRevTable 1 }
CpuUtilProcessStatsRevTableEntry ::=
SEQUENCE {
processIdRev Integer32,
processNameRev DisplayString,
cpuProcessUtil1SecRev Gauge32,
cpuProcessUtil5SecRev Gauge32,
cpuProcessUtil1MinRev Gauge32,
cpuProcessUtil5MinRev Gauge32,
processStatusRev DisplayString
}
processIdRev OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The process ID."
::= { cpuUtilProcessStatsRevTableEntry 1 }
processNameRev OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Process Name."
::= { cpuUtilProcessStatsRevTableEntry 2 }
cpuProcessUtil1SecRev OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 second.
It shows the percentage."
::= { cpuUtilProcessStatsRevTableEntry 3 }
cpuProcessUtil5SecRev OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 seconds.
It shows the percentage."
::= { cpuUtilProcessStatsRevTableEntry 4 }
cpuProcessUtil1MinRev OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 1 min.
It shows the percentage."
::= { cpuUtilProcessStatsRevTableEntry 5 }
cpuProcessUtil5MinRev OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The utilization of MP CPU over 5 min.
It shows the percentage."
::= { cpuUtilProcessStatsRevTableEntry 6 }
processStatusRev OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Process Status"
::= { cpuUtilProcessStatsRevTableEntry 7 }
-- Memory Statistics Group
totalMemoryStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total memory in bytes.
"
::= { memoryStats 1}
memoryFreeStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The free memory in bytes.
"
::= { memoryStats 2}
memorySharedStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The shared memory in bytes.
"
::= { memoryStats 3}
memoryBufferStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The buffer memory in bytes.
"
::= { memoryStats 4}
swapTotalStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total swap memory in bytes.
"
::= { memoryStats 5}
swapFreeStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The free swap memory in bytes.
"
::= { memoryStats 6}
highTotalStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total high memory in bytes.
"
::= { memoryStats 7}
highFreeStats OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The free high memory in bytes.
"
::= { memoryStats 8}
-- ----------------------------------------------------------------------------
-- } INSERT: hardware
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: agent
-- ----------------------------------------------------------------------------
layer2 OBJECT IDENTIFIER ::= { g7052-mgmt 2 }
-- ----------------------------------------------------------------------------
-- { INSERT: layer2
-- ----------------------------------------------------------------------------
layer2Configs OBJECT IDENTIFIER ::= { layer2 1 }
layer2Stats OBJECT IDENTIFIER ::= { layer2 2 }
layer2Info OBJECT IDENTIFIER ::= { layer2 3 }
layer2Oper OBJECT IDENTIFIER ::= { layer2 4 }
vlan OBJECT IDENTIFIER ::= { layer2Configs 1 }
trunkgroup OBJECT IDENTIFIER ::= { layer2Configs 2 }
stgCfg OBJECT IDENTIFIER ::= { layer2Configs 3 }
mirroring OBJECT IDENTIFIER ::= { layer2Configs 4 }
lacp OBJECT IDENTIFIER ::= { layer2Configs 5 }
thash OBJECT IDENTIFIER ::= { layer2Configs 6 }
mstCfg OBJECT IDENTIFIER ::= { layer2Configs 7 }
l2GeneralCfg OBJECT IDENTIFIER ::= { layer2Configs 8 }
failoverCfg OBJECT IDENTIFIER ::= { layer2Configs 10 }
-- ----------------------------------------------------------------------------
-- { INSERT: failoverCfg
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- { GLOBAL TEAMING CONFIG
-- ----------------------------------------------------------------------------
failoverCurCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Failover ON/OFF setting."
::= { failoverCfg 1 }
failoverNewCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Failover ON/OFF settings."
::= { failoverCfg 2 }
failoverMaxTriggerEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the Failover Trigger Table."
::= { failoverCfg 5 }
-- } GLOBAL TEAMING CONFIG
-- ----------------------------------------------------------------------------
-- { CUR TEAMING FOP CONFIG
-- ----------------------------------------------------------------------------
failoverCurCfgTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF FailoverCurCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Failover Trigger Table."
::= { failoverCfg 6 }
failoverCurCfgTriggerTableEntry OBJECT-TYPE
SYNTAX FailoverCurCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Failover Trigger Table."
INDEX { failoverCurCfgTriggerId }
::= { failoverCurCfgTriggerTable 1 }
FailoverCurCfgTriggerTableEntry ::= SEQUENCE {
failoverCurCfgTriggerId Integer32,
failoverCurCfgTriggerLimit INTEGER,
failoverCurCfgTriggerMmonPort OCTET STRING,
failoverCurCfgTriggerMmonTrunk OCTET STRING,
failoverCurCfgTriggerMmonKey DisplayString,
failoverCurCfgTriggerMconPort OCTET STRING,
failoverCurCfgTriggerMconTrunk OCTET STRING,
failoverCurCfgTriggerMconKey DisplayString,
failoverCurCfgTriggerState INTEGER
}
failoverCurCfgTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { failoverCurCfgTriggerTableEntry 1 }
failoverCurCfgTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable Trigger state"
::= { failoverCurCfgTriggerTableEntry 2 }
failoverCurCfgTriggerLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Limit # of operational links"
::= { failoverCurCfgTriggerTableEntry 3 }
failoverCurCfgTriggerMmonPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Monitor port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Monitor
0 - The represented port does not belong to the Manual Monitor"
::= { failoverCurCfgTriggerTableEntry 6 }
failoverCurCfgTriggerMmonTrunk OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Monitor trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Monitor
0 - The represented trunk does not belong to the Manual Monitor"
::= { failoverCurCfgTriggerTableEntry 7 }
failoverCurCfgTriggerMmonKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP admin key. This is an array of 16-bit read-only values."
::= { failoverCurCfgTriggerTableEntry 8 }
failoverCurCfgTriggerMconPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Control port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Control
0 - The represented port does not belong to the Manual Control"
::= { failoverCurCfgTriggerTableEntry 9 }
failoverCurCfgTriggerMconTrunk OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Control trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Control
0 - The represented trunk does not belong to the Manual Control"
::= { failoverCurCfgTriggerTableEntry 11 }
failoverCurCfgTriggerMconKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP admin key. This is an array of 16-bit read-only values."
::= { failoverCurCfgTriggerTableEntry 12 }
-- } CUR TEAMING FOP CONFIG
-- ----------------------------------------------------------------------------
-- { NEW TEAMING FOP CONFIG
-- ----------------------------------------------------------------------------
failoverNewCfgTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF FailoverNewCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Failover Trigger Table."
::= { failoverCfg 7 }
failoverNewCfgTriggerTableEntry OBJECT-TYPE
SYNTAX FailoverNewCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Failover Trigger Table."
INDEX { failoverNewCfgTriggerId }
::= { failoverNewCfgTriggerTable 1 }
FailoverNewCfgTriggerTableEntry ::= SEQUENCE {
failoverNewCfgTriggerId Integer32,
failoverNewCfgTriggerLimit INTEGER,
failoverNewCfgTriggerMmonPort OCTET STRING,
failoverNewCfgTriggerMmonPortIndexAdd PortNumber,
failoverNewCfgTriggerMmonPortIndexRem PortNumber,
failoverNewCfgTriggerMmonTrunk OCTET STRING,
failoverNewCfgTriggerMmonTrunkAdd INTEGER,
failoverNewCfgTriggerMmonTrunkRem INTEGER,
failoverNewCfgTriggerMmonKey DisplayString,
failoverNewCfgTriggerMmonKeyAdd INTEGER,
failoverNewCfgTriggerMmonKeyRem INTEGER,
failoverNewCfgTriggerMconPort OCTET STRING,
failoverNewCfgTriggerMconPortIndexAdd PortNumber,
failoverNewCfgTriggerMconPortIndexRem PortNumber,
failoverNewCfgTriggerMconTrunk OCTET STRING,
failoverNewCfgTriggerMconTrunkAdd INTEGER,
failoverNewCfgTriggerMconTrunkRem INTEGER,
failoverNewCfgTriggerMconKey DisplayString,
failoverNewCfgTriggerMconKeyAdd INTEGER,
failoverNewCfgTriggerMconKeyRem INTEGER,
failoverNewCfgTriggerState INTEGER,
failoverNewCfgTriggerDelete INTEGER
,failoverNewCfgTriggerMmonPortAliasAdd DisplayString
,failoverNewCfgTriggerMmonPortAliasRem DisplayString
,failoverNewCfgTriggerMconPortAliasAdd DisplayString
,failoverNewCfgTriggerMconPortAliasRem DisplayString
}
failoverNewCfgTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { failoverNewCfgTriggerTableEntry 1 }
failoverNewCfgTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Trigger state"
::= { failoverNewCfgTriggerTableEntry 2 }
failoverNewCfgTriggerLimit OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Limit # of operational links"
::= { failoverNewCfgTriggerTableEntry 3 }
failoverNewCfgTriggerMmonPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Monitor port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Monitor
0 - The represented port does not belong to the Manual Monitor"
::= { failoverNewCfgTriggerTableEntry 10 }
failoverNewCfgTriggerMmonPortIndexAdd OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add port to Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 11 }
failoverNewCfgTriggerMmonPortIndexRem OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove port from Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 12 }
failoverNewCfgTriggerMmonTrunk OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Monitor trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Monitor
0 - The represented trunk does not belong to the Manual Monitor"
::= { failoverNewCfgTriggerTableEntry 13 }
failoverNewCfgTriggerMmonTrunkAdd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add trunk to Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 14 }
failoverNewCfgTriggerMmonTrunkRem OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove trunk from Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 15 }
failoverNewCfgTriggerMmonKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP admin key. This is an array of 16-bit read-only values."
::= { failoverNewCfgTriggerTableEntry 16 }
failoverNewCfgTriggerMmonKeyAdd OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add LACP admin key to Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 17 }
failoverNewCfgTriggerMmonKeyRem OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove LACP admin key from Manual Monitor. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 18 }
failoverNewCfgTriggerMconPort OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Control port list. The ports are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the Manual Control
0 - The represented port does not belong to the Manual Control"
::= { failoverNewCfgTriggerTableEntry 19 }
failoverNewCfgTriggerMconPortIndexAdd OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add port to Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 20 }
failoverNewCfgTriggerMconPortIndexRem OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove port from Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 21 }
failoverNewCfgTriggerMconTrunk OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Manual Control trunk list. The trunks are presented in bitmap format:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to the Manual Control
0 - The represented trunk does not belong to the Manual Control"
::= { failoverNewCfgTriggerTableEntry 25 }
failoverNewCfgTriggerMconTrunkAdd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add trunk to Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 26 }
failoverNewCfgTriggerMconTrunkRem OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove trunk from Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 27 }
failoverNewCfgTriggerMconKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP admin key. This is an array of 16-bit read-only values."
::= { failoverNewCfgTriggerTableEntry 28 }
failoverNewCfgTriggerMconKeyAdd OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add LACP admin key to Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 29 }
failoverNewCfgTriggerMconKeyRem OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove LACP admin key from Manual Control. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 30 }
failoverNewCfgTriggerDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { failoverNewCfgTriggerTableEntry 31 }
failoverNewCfgTriggerMmonPortAliasAdd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add port to Manual Monitor using its alias. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 33 }
failoverNewCfgTriggerMmonPortAliasRem OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove port from Manual Monitor using its alias. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 34 }
failoverNewCfgTriggerMconPortAliasAdd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add port to Manual Control using its alias. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 35 }
failoverNewCfgTriggerMconPortAliasRem OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Remove port from Manual Control using its alias. When read, 0 is returned."
::= { failoverNewCfgTriggerTableEntry 36 }
-- } NEW TEAMING FOP CONFIG
-- ----------------------------------------------------------------------------
-- } INSERT: failoverCfg
-- ----------------------------------------------------------------------------
dot1x OBJECT IDENTIFIER ::= { layer2Configs 12 }
fdb OBJECT IDENTIFIER ::= { layer2Configs 13 }
hotlinksCfg OBJECT IDENTIFIER ::= { layer2Configs 14 }
-- ----------------------------------------------------------------------------
-- { INSERT: hotlinksCfg
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- { GLOBAL HOTLINKS CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hot Links ON/OFF setting."
::= { hotlinksCfg 1 }
hotlinksNewCfgOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hot Links ON/OFF settings."
::= { hotlinksCfg 2 }
hotlinksCurCfgFdbUpdateState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Hot Links FDB Update setting."
::= { hotlinksCfg 3 }
hotlinksNewCfgFdbUpdateState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Hot Links FDB Update setting."
::= { hotlinksCfg 4 }
hotlinksMaxTriggerEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the Hot Links Trigger Table."
::= { hotlinksCfg 5 }
-- } GLOBAL HOTLINKS CONFIG
-- ----------------------------------------------------------------------------
-- { CUR HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksCurCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table."
::= { hotlinksCfg 6 }
hotlinksCurCfgTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksCurCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table."
INDEX { hotlinksCurCfgTriggerId }
::= { hotlinksCurCfgTriggerTable 1 }
HotlinksCurCfgTriggerTableEntry ::= SEQUENCE {
hotlinksCurCfgTriggerId Integer32,
hotlinksCurCfgTriggerName DisplayString,
hotlinksCurCfgTriggerState INTEGER,
hotlinksCurCfgTriggerPreemptState INTEGER,
hotlinksCurCfgTriggerFdelay Integer32,
hotlinksCurCfgTriggerMasterPortIndex Integer32,
hotlinksCurCfgTriggerMasterTrunk Integer32,
hotlinksCurCfgTriggerBackupPortIndex Integer32,
hotlinksCurCfgTriggerBackupTrunk Integer32,
hotlinksCurCfgTriggerDelete INTEGER
, hotlinksCurCfgTriggerMasterAdminkey Integer32
, hotlinksCurCfgTriggerBackupAdminkey Integer32
, hotlinksCurCfgTriggerMasterPortAlias DisplayString
, hotlinksCurCfgTriggerBackupPortAlias DisplayString
}
hotlinksCurCfgTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksCurCfgTriggerTableEntry 1 }
hotlinksCurCfgTriggerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing the trigger name."
::= { hotlinksCurCfgTriggerTableEntry 2 }
hotlinksCurCfgTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Trigger state."
::= { hotlinksCurCfgTriggerTableEntry 3 }
hotlinksCurCfgTriggerPreemptState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Preemption state."
::= { hotlinksCurCfgTriggerTableEntry 4 }
hotlinksCurCfgTriggerFdelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Delay setting (in secs)."
::= { hotlinksCurCfgTriggerTableEntry 5 }
hotlinksCurCfgTriggerMasterPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master interface port number."
::= { hotlinksCurCfgTriggerTableEntry 6 }
hotlinksCurCfgTriggerMasterTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master interface trunk number."
::= { hotlinksCurCfgTriggerTableEntry 7 }
hotlinksCurCfgTriggerBackupPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup interface port number."
::= { hotlinksCurCfgTriggerTableEntry 8 }
hotlinksCurCfgTriggerBackupTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup interface trunk number."
::= { hotlinksCurCfgTriggerTableEntry 9 }
hotlinksCurCfgTriggerDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Delete a Hot Links trigger configuration."
::= { hotlinksCurCfgTriggerTableEntry 10 }
hotlinksCurCfgTriggerMasterAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master interface admin key number."
::= { hotlinksCurCfgTriggerTableEntry 11 }
hotlinksCurCfgTriggerBackupAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup interface admin key number."
::= { hotlinksCurCfgTriggerTableEntry 12 }
hotlinksCurCfgTriggerMasterPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The master interface port alias."
::= { hotlinksCurCfgTriggerTableEntry 17 }
hotlinksCurCfgTriggerBackupPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The backup interface port alias."
::= { hotlinksCurCfgTriggerTableEntry 18 }
-- } CUR HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
-- { NEW HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
hotlinksNewCfgTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksNewCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table."
::= { hotlinksCfg 7 }
hotlinksNewCfgTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksNewCfgTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table."
INDEX { hotlinksNewCfgTriggerId }
::= { hotlinksNewCfgTriggerTable 1 }
HotlinksNewCfgTriggerTableEntry ::= SEQUENCE {
hotlinksNewCfgTriggerId Integer32,
hotlinksNewCfgTriggerName DisplayString,
hotlinksNewCfgTriggerState INTEGER,
hotlinksNewCfgTriggerPreemptState INTEGER,
hotlinksNewCfgTriggerFdelay Integer32,
hotlinksNewCfgTriggerMasterPortIndex Integer32,
hotlinksNewCfgTriggerMasterTrunk Integer32,
hotlinksNewCfgTriggerBackupPortIndex Integer32,
hotlinksNewCfgTriggerBackupTrunk Integer32,
hotlinksNewCfgTriggerDelete INTEGER
, hotlinksNewCfgTriggerMasterAdminkey Integer32
, hotlinksNewCfgTriggerBackupAdminkey Integer32
, hotlinksNewCfgTriggerMasterPortAlias DisplayString
, hotlinksNewCfgTriggerBackupPortAlias DisplayString
}
hotlinksNewCfgTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksNewCfgTriggerTableEntry 1 }
hotlinksNewCfgTriggerName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..33))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual string containing the trigger name."
::= { hotlinksNewCfgTriggerTableEntry 2 }
hotlinksNewCfgTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Trigger state."
::= { hotlinksNewCfgTriggerTableEntry 3 }
hotlinksNewCfgTriggerPreemptState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Preemption state."
::= { hotlinksNewCfgTriggerTableEntry 4 }
hotlinksNewCfgTriggerFdelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forward Delay setting (in secs)."
::= { hotlinksNewCfgTriggerTableEntry 5 }
hotlinksNewCfgTriggerMasterPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master interface port number."
::= { hotlinksNewCfgTriggerTableEntry 6 }
hotlinksNewCfgTriggerMasterTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master interface trunk number."
::= { hotlinksNewCfgTriggerTableEntry 7 }
hotlinksNewCfgTriggerBackupPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup interface port number."
::= { hotlinksNewCfgTriggerTableEntry 8 }
hotlinksNewCfgTriggerBackupTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup interface trunk number."
::= { hotlinksNewCfgTriggerTableEntry 9 }
hotlinksNewCfgTriggerDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete a Hot Links trigger configuration."
::= { hotlinksNewCfgTriggerTableEntry 10 }
hotlinksNewCfgTriggerMasterAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master interface admin key number."
::= { hotlinksNewCfgTriggerTableEntry 11 }
hotlinksNewCfgTriggerBackupAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup interface admin key number."
::= { hotlinksNewCfgTriggerTableEntry 12 }
hotlinksNewCfgTriggerMasterPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The master interface port alias."
::= { hotlinksNewCfgTriggerTableEntry 17 }
hotlinksNewCfgTriggerBackupPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The backup interface port alias."
::= { hotlinksNewCfgTriggerTableEntry 18 }
-- } NEW HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------
-- { BPDU FLOOD CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgBpduState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Hot Links BPDU flood setting."
::= { hotlinksCfg 8 }
hotlinksNewCfgBpduState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable Hot Links BPDU flood setting."
::= { hotlinksCfg 9 }
-- } BPDU FLOOD CONFIG
-- ----------------------------------------------------------------------------
-- { FDB UPDATE RATE CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgFdbUpdateRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hot Links FDB update rate (packets per second)."
::= { hotlinksCfg 10 }
hotlinksNewCfgFdbUpdateRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hot Links FDB update rate (packets per second)."
::= { hotlinksCfg 11 }
-- } FDB UPDATE RATE CONFIG
-- ----------------------------------------------------------------------------
-- } INSERT: hotlinksCfg
-- ----------------------------------------------------------------------------
lldpCfg OBJECT IDENTIFIER ::= { layer2Configs 15 }
vlagCfg OBJECT IDENTIFIER ::= { layer2Configs 18 }
vlagIslCfg OBJECT IDENTIFIER ::= { vlagCfg 1 }
thashL2L3 OBJECT IDENTIFIER ::= { thash 1 }
mirrPortMirr OBJECT IDENTIFIER ::= { mirroring 1 }
mstGeneralCfg OBJECT IDENTIFIER ::= { mstCfg 1 }
mstCistCfg OBJECT IDENTIFIER ::= { mstCfg 2 }
dot1xCurCfgGlobalTable OBJECT IDENTIFIER ::= { dot1x 5 }
dot1xCurCfgGuestVlan OBJECT IDENTIFIER ::= { dot1xCurCfgGlobalTable 1 }
dot1xNewCfgGlobalTable OBJECT IDENTIFIER ::= { dot1x 6 }
fdbGeneralCfg OBJECT IDENTIFIER ::= { fdb 1 }
-- FDB
fdbCurCfgAgingTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fdb current aging time"
::= { fdbGeneralCfg 1 }
fdbNewCfgAgingTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fdb new aging time."
::= { fdbGeneralCfg 2 }
dot1xNewCfgGuestVlan OBJECT IDENTIFIER ::= { dot1xNewCfgGlobalTable 1 }
fdbStats OBJECT IDENTIFIER ::= { layer2Stats 1 }
stpStats OBJECT IDENTIFIER ::= { layer2Stats 2 }
lacpStats OBJECT IDENTIFIER ::= { layer2Stats 4 }
hotlinksStats OBJECT IDENTIFIER ::= { layer2Stats 6 }
-- ----------------------------------------------------------------------------
-- { INSERT: hotlinksStats
-- ----------------------------------------------------------------------------
hotlinksStatsTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksStatsTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table Stats."
::= { hotlinksStats 1 }
hotlinksStatsTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksStatsTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table Stats."
INDEX { hotlinksStatsTriggerId }
::= { hotlinksStatsTriggerTable 1 }
HotlinksStatsTriggerTableEntry ::= SEQUENCE {
hotlinksStatsTriggerId Integer32,
hotlinksStatsTriggerName DisplayString,
hotlinksStatsTriggerMasterActive Integer32,
hotlinksStatsTriggerBackupActive Integer32,
hotlinksStatsTriggerFdbUpdate Integer32,
hotlinksStatsTriggerFdbFailed Integer32
}
hotlinksStatsTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksStatsTriggerTableEntry 1 }
hotlinksStatsTriggerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing the trigger name."
::= { hotlinksStatsTriggerTableEntry 2 }
hotlinksStatsTriggerMasterActive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the master interface was set to active."
::= { hotlinksStatsTriggerTableEntry 3 }
hotlinksStatsTriggerBackupActive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the backup interface was set to active."
::= { hotlinksStatsTriggerTableEntry 4 }
hotlinksStatsTriggerFdbUpdate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an FDB update was performed."
::= { hotlinksStatsTriggerTableEntry 5 }
hotlinksStatsTriggerFdbFailed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an FDB update failed."
::= { hotlinksStatsTriggerTableEntry 6 }
-- ----------------------------------------------------------------------------
-- } INSERT: hotlinksStats
-- ----------------------------------------------------------------------------
lldpStats OBJECT IDENTIFIER ::= { layer2Stats 7 }
vlagStats OBJECT IDENTIFIER ::= { layer2Stats 11 }
vlagStatsSystem OBJECT IDENTIFIER ::= { vlagStats 1 }
vlagStatsIsl OBJECT IDENTIFIER ::= { vlagStats 2 }
vlagStatsHealth OBJECT IDENTIFIER ::= { vlagStats 3 }
vlagStatsLacp OBJECT IDENTIFIER ::= { vlagStats 4 }
vlagStatsPdu OBJECT IDENTIFIER ::= { vlagStats 5 }
vlagStatsIgmp OBJECT IDENTIFIER ::= { vlagStats 6 }
cistStats OBJECT IDENTIFIER ::= { layer2Stats 13 }
fdbInfo OBJECT IDENTIFIER ::= { layer2Info 1 }
stpInfo OBJECT IDENTIFIER ::= { layer2Info 2 }
lacpInfo OBJECT IDENTIFIER ::= { layer2Info 3 }
cistInfo OBJECT IDENTIFIER ::= { layer2Info 4 }
genInfo OBJECT IDENTIFIER ::= { layer2Info 7 }
vlanInfo OBJECT IDENTIFIER ::= { layer2Info 5 }
dot1xInfo OBJECT IDENTIFIER ::= { layer2Info 6 }
trunkGroupInfo OBJECT IDENTIFIER ::= { layer2Info 9 }
hotlinksInfo OBJECT IDENTIFIER ::= { layer2Info 10 }
-- ----------------------------------------------------------------------------
-- { INSERT: hotlinksInfo
-- ----------------------------------------------------------------------------
hotlinksInfoOnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hot Links ON/OFF setting info."
::= { hotlinksInfo 1 }
hotlinksInfoFdbUpdateState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Hot Links FDB Update setting info."
::= { hotlinksInfo 2 }
hotlinksInfoTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HotlinksInfoTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Hot Links Trigger Table Info."
::= { hotlinksInfo 3 }
hotlinksInfoBpduState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Hot Links BPDU flood setting info."
::= { hotlinksInfo 4 }
hotlinksInfoFdbUpdateRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hot Links FDB update rate (packets per second)."
::= { hotlinksInfo 5 }
hotlinksInfoTriggerTableEntry OBJECT-TYPE
SYNTAX HotlinksInfoTriggerTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Hot Links Trigger Table Info."
INDEX { hotlinksInfoTriggerId }
::= { hotlinksInfoTriggerTable 1 }
HotlinksInfoTriggerTableEntry ::= SEQUENCE {
hotlinksInfoTriggerId Integer32,
hotlinksInfoTriggerName DisplayString,
hotlinksInfoTriggerState INTEGER,
hotlinksInfoTriggerPreemptState INTEGER,
hotlinksInfoTriggerFdelay Integer32,
hotlinksInfoTriggerActive DisplayString
}
hotlinksInfoTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trigger identifier."
::= { hotlinksInfoTriggerTableEntry 1 }
hotlinksInfoTriggerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing the trigger name."
::= { hotlinksInfoTriggerTableEntry 2 }
hotlinksInfoTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Trigger state info."
::= { hotlinksInfoTriggerTableEntry 3 }
hotlinksInfoTriggerPreemptState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Preemption state info."
::= { hotlinksInfoTriggerTableEntry 4 }
hotlinksInfoTriggerFdelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Forward Delay setting info (in secs)."
::= { hotlinksInfoTriggerTableEntry 5 }
hotlinksInfoTriggerActive OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing the active interface info."
::= { hotlinksInfoTriggerTableEntry 6 }
-- ----------------------------------------------------------------------------
-- } INSERT: hotlinksInfo
-- ----------------------------------------------------------------------------
lldpInfo OBJECT IDENTIFIER ::= { layer2Info 11 }
cistGeneralInfo OBJECT IDENTIFIER ::= { cistInfo 1 }
dot1xSystemInfo OBJECT IDENTIFIER ::= { dot1xInfo 2 }
udldInfo OBJECT IDENTIFIER ::= { layer2Info 13 }
failoverInfo OBJECT IDENTIFIER ::= { layer2Info 14 }
-- ----------------------------------------------------------------------------
-- { INSERT: failoverInfo
-- ----------------------------------------------------------------------------
failoverInfoState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of failover"
::= { failoverInfo 1 }
failoverInfoTriggerTable OBJECT-TYPE
SYNTAX SEQUENCE OF FailoverInfoTriggerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the information for individual triggers"
::= { failoverInfo 3 }
failoverInfoTriggerEntry OBJECT-TYPE
SYNTAX FailoverInfoTriggerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the failover trigger table."
INDEX { failoverInfoTriggerId }
::= { failoverInfoTriggerTable 1 }
FailoverInfoTriggerEntry ::= SEQUENCE {
failoverInfoTriggerId Integer32,
failoverInfoTriggerState INTEGER,
failoverInfoTriggerLimit INTEGER,
failoverInfoTriggerMonitorState INTEGER,
failoverInfoTriggerMonitorPorts OCTET STRING,
failoverInfoTriggerControlState INTEGER,
failoverInfoTriggerControlPorts OCTET STRING,
failoverInfoTriggerControlPorts OCTET STRING
}
failoverInfoTriggerId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trigger identifier."
::= { failoverInfoTriggerEntry 1 }
failoverInfoTriggerState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trigger state."
::= { failoverInfoTriggerEntry 2 }
failoverInfoTriggerLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Limit number of operational links"
::= { failoverInfoTriggerEntry 3 }
failoverInfoTriggerMonitorState OBJECT-TYPE
SYNTAX INTEGER{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The runtime monitor state"
::= { failoverInfoTriggerEntry 4 }
failoverInfoTriggerMonitorPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of ports that are monitored. The ports are
represented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to Monitor list
0 - The represented port does not belong to Monitor list"
::= { failoverInfoTriggerEntry 5 }
failoverInfoTriggerControlState OBJECT-TYPE
SYNTAX INTEGER{
auto-controlled(1),
auto-disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The runtime control state"
::= { failoverInfoTriggerEntry 6 }
failoverInfoTriggerControlPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of ports that are controlled. The ports are
represented in bitmap format in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to Control list
0 - The represented port does not belong to Control list"
::= { failoverInfoTriggerEntry 7 }
failoverInfoMonPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF FailoverInfoTriggerMonPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the information for individual triggers"
::= { failoverInfo 4 }
failoverInfoTriggerMonPortEntry OBJECT-TYPE
SYNTAX FailoverInfoTriggerMonPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the failover trigger table."
INDEX { failoverInfoTriggerMonId, failoverInfoTriggerMonPortId }
::= { failoverInfoMonPortStateTable 1 }
FailoverInfoTriggerMonPortEntry ::= SEQUENCE {
failoverInfoTriggerMonId Integer32,
failoverInfoTriggerMonPortId PortNumber,
failoverInfoTriggerMonPortStatus INTEGER
,failoverInfoTriggerMonPortAlias DisplayString
}
failoverInfoTriggerMonId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trigger identifier."
::= { failoverInfoTriggerMonPortEntry 1 }
failoverInfoTriggerMonPortId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier."
::= { failoverInfoTriggerMonPortEntry 2 }
failoverInfoTriggerMonPortStatus OBJECT-TYPE
SYNTAX INTEGER{
failed(0),
operational(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Status."
::= { failoverInfoTriggerMonPortEntry 3 }
failoverInfoTriggerMonPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port alias."
::= { failoverInfoTriggerMonPortEntry 4 }
failoverInfoCtlPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF FailoverInfoTriggerCtlPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table holds the information for individual triggers"
::= { failoverInfo 5 }
failoverInfoTriggerCtlPortEntry OBJECT-TYPE
SYNTAX FailoverInfoTriggerCtlPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the failover trigger table."
INDEX { failoverInfoTriggerCtlId, failoverInfoTriggerCtlPortId }
::= { failoverInfoCtlPortStateTable 1 }
FailoverInfoTriggerCtlPortEntry ::= SEQUENCE {
failoverInfoTriggerCtlId Integer32,
failoverInfoTriggerCtlPortId PortNumber,
failoverInfoTriggerCtlPortStatus INTEGER
,failoverInfoTriggerCtlPortAlias DisplayString
}
failoverInfoTriggerCtlId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trigger identifier."
::= { failoverInfoTriggerCtlPortEntry 1 }
failoverInfoTriggerCtlPortId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier."
::= { failoverInfoTriggerCtlPortEntry 2 }
failoverInfoTriggerCtlPortStatus OBJECT-TYPE
SYNTAX INTEGER{
failed(0),
operational(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Status."
::= { failoverInfoTriggerCtlPortEntry 3 }
failoverInfoTriggerCtlPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port alias."
::= { failoverInfoTriggerCtlPortEntry 4 }
-- ----------------------------------------------------------------------------
-- } INSERT: failoverInfo
-- ----------------------------------------------------------------------------
vlagInfo OBJECT IDENTIFIER ::= { layer2Info 16 }
vlagInfoSystem OBJECT IDENTIFIER ::= { vlagInfo 1 }
vlagInfoGroup OBJECT IDENTIFIER ::= { vlagInfo 2 }
vlagInfoIslGroup OBJECT IDENTIFIER ::= { vlagInfoGroup 2 }
-- VLAN group
vlanMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the VLAN configuration table."
::= { vlan 1 }
vlanMaxVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum allowed VLAN ID."
::= { vlan 4 }
vlanCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration."
::= { vlan 2 }
vlanCurCfgTableEntry OBJECT-TYPE
SYNTAX VlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanCurCfgVlanId }
::= { vlanCurCfgTable 1 }
VlanCurCfgTableEntry ::= SEQUENCE {
vlanCurCfgVlanId Integer32,
vlanCurCfgPorts OCTET STRING,
vlanCurCfgState INTEGER,
vlanCurCfgStg Integer32,
vlanCurCfgPrVlanType INTEGER,
vlanCurCfgPrVlanMapPriId Integer32,
vlanCurCfgVlanName DisplayString
}
vlanCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanCurCfgTableEntry 1 }
vlanCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanCurCfgTableEntry 2 }
vlanCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanCurCfgTableEntry 3 }
vlanCurCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanCurCfgTableEntry 5 }
vlanCurCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanCurCfgTableEntry 9 }
vlanCurCfgPrVlanType OBJECT-TYPE
SYNTAX INTEGER{
none(0),
primary(1),
isolated(2),
community(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the Private VLAN."
::= { vlanCurCfgTableEntry 10 }
vlanCurCfgPrVlanMapPriId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary vlan id"
::= { vlanCurCfgTableEntry 11 }
vlanNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN configuration."
::= { vlan 3 }
vlanNewCfgTableEntry OBJECT-TYPE
SYNTAX VlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN configuration table."
INDEX { vlanNewCfgVlanId }
::= { vlanNewCfgTable 1 }
VlanNewCfgTableEntry ::= SEQUENCE {
vlanNewCfgVlanId Integer32,
vlanNewCfgVlanName DisplayString,
vlanNewCfgPorts OCTET STRING,
vlanNewCfgState INTEGER,
vlanNewCfgAddPortIndex PortNumber,
vlanNewCfgRemovePortIndex PortNumber,
vlanNewCfgStg Integer32,
vlanNewCfgPrVlanType INTEGER,
vlanNewCfgPrVlanMapPriId Integer32,
vlanNewCfgDelete INTEGER
,vlanNewCfgAddPortAlias DisplayString
,vlanNewCfgRemovePortAlias DisplayString
}
vlanNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanNewCfgTableEntry 1 }
vlanNewCfgVlanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanNewCfgTableEntry 2 }
vlanNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanNewCfgTableEntry 3 }
vlanNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a VLAN"
::= { vlanNewCfgTableEntry 4 }
vlanNewCfgAddPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added to the specified VLAN. A '0' value is
returned when read."
::= { vlanNewCfgTableEntry 5 }
vlanNewCfgRemovePortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be removed from the specified VLAN. A '0'
value is returned when read."
::= { vlanNewCfgTableEntry 6 }
vlanNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN"
::= { vlanNewCfgTableEntry 7 }
vlanNewCfgStg OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Spanning Tree Group for the VLAN."
::= { vlanNewCfgTableEntry 9 }
vlanNewCfgPrVlanType OBJECT-TYPE
SYNTAX INTEGER{
none(0),
primary(1),
isolated(2),
community(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of the Private VLAN."
::= { vlanNewCfgTableEntry 13 }
vlanNewCfgPrVlanMapPriId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The primary vlan id. To delete set 0."
::= { vlanNewCfgTableEntry 14 }
vlanNewCfgAddPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port alias to be added to the specified VLAN. A '0' value is
returned when read."
::= { vlanNewCfgTableEntry 28 }
vlanNewCfgRemovePortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port alias to be removed from the specified VLAN. A '0'
value is returned when read."
::= { vlanNewCfgTableEntry 29 }
pvlanCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF PvlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of PROTOCOL VLAN configuration."
::= { vlan 5 }
pvlanCurCfgTableEntry OBJECT-TYPE
SYNTAX PvlanCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Protocol VLAN configuration table."
INDEX { pvlanCurCfgVlanId, pvlanCurCfgPvlanId }
::= { pvlanCurCfgTable 1 }
PvlanCurCfgTableEntry ::= SEQUENCE {
pvlanCurCfgVlanId Integer32,
pvlanCurCfgPvlanId Integer32,
pvlanCurCfgPvlanFrameType INTEGER,
pvlanCurCfgPvlanEtherType DisplayString,
pvlanCurCfgPvlanPorts OCTET STRING,
pvlanCurCfgPvlanPrio INTEGER,
pvlanCurCfgPvlanState INTEGER,
pvlanCurCfgPvlanTagPorts OCTET STRING,
pvlanCurCfgPvlanPredefProto INTEGER
}
pvlanCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { pvlanCurCfgTableEntry 1 }
pvlanCurCfgPvlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PVLAN identifier."
::= { pvlanCurCfgTableEntry 2 }
pvlanCurCfgPvlanFrameType OBJECT-TYPE
SYNTAX INTEGER{
none(0),
ethernet2(1),
snap(2),
llc(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frame type of the PVLAN."
::= { pvlanCurCfgTableEntry 3 }
pvlanCurCfgPvlanEtherType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ether type of the PVLAN."
::= { pvlanCurCfgTableEntry 4 }
pvlanCurCfgPvlanPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the PVLAN. The ports are presented in bitmap format."
::= { pvlanCurCfgTableEntry 5 }
pvlanCurCfgPvlanPrio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of the PVLAN."
::= { pvlanCurCfgTableEntry 6 }
pvlanCurCfgPvlanState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a PVLAN."
::= { pvlanCurCfgTableEntry 7 }
pvlanCurCfgPvlanTagPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of tagged-PVLAN ports. The ports are presented in bitmap format."
::= { pvlanCurCfgTableEntry 8 }
pvlanCurCfgPvlanPredefProto OBJECT-TYPE
SYNTAX INTEGER {
userDefined(0),
decEther2(1),
ipv4Ether2(2),
ipv6Ether2(3),
ipx802dot2(4),
ipx802dot3(5),
ipxEther2(6),
ipxSnap(7),
netbios(8),
rarpEther2(9),
sna802dot2(10),
snaEther2(11),
vinesEther2(12),
xnsEther2(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A predefined Protocol (setting EtherType and FrameType to
predefined values)."
::= { pvlanCurCfgTableEntry 9 }
pvlanNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF PvlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of PROTOCOL VLAN configuration."
::= { vlan 6 }
pvlanNewCfgTableEntry OBJECT-TYPE
SYNTAX PvlanNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Protocol VLAN configuration table."
INDEX { pvlanNewCfgVlanId, pvlanNewCfgPvlanId }
::= { pvlanNewCfgTable 1 }
PvlanNewCfgTableEntry ::= SEQUENCE {
pvlanNewCfgVlanId Integer32,
pvlanNewCfgPvlanId Integer32,
pvlanNewCfgPvlanFrameType INTEGER,
pvlanNewCfgPvlanEtherType DisplayString,
pvlanNewCfgPvlanAddPortIndex PortNumber,
pvlanNewCfgPvlanRemovePortIndex PortNumber,
pvlanNewCfgPvlanPrio INTEGER,
pvlanNewCfgPvlanState INTEGER,
pvlanNewCfgPvlanTagPortIndex PortNumber,
pvlanNewCfgPvlanUntagPortIndex PortNumber,
pvlanNewCfgPvlanPorts OCTET STRING,
pvlanNewCfgPvlanTagPorts OCTET STRING,
pvlanNewCfgPvlanDelete INTEGER,
pvlanNewCfgPvlanPredefProto INTEGER
,pvlanNewCfgPvlanAddPortAlias DisplayString
,pvlanNewCfgPvlanRemovePortAlias DisplayString
,pvlanNewCfgPvlanTagPortAlias DisplayString
,pvlanNewCfgPvlanUntagPortAlias DisplayString
}
pvlanNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { pvlanNewCfgTableEntry 1 }
pvlanNewCfgPvlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PVLAN identifier."
::= { pvlanNewCfgTableEntry 2 }
pvlanNewCfgPvlanFrameType OBJECT-TYPE
SYNTAX INTEGER{
none(0),
ethernet2(1),
snap(2),
llc(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The frame type of the PVLAN."
::= { pvlanNewCfgTableEntry 3 }
pvlanNewCfgPvlanEtherType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ehter type of the PVLAN."
::= { pvlanNewCfgTableEntry 4 }
pvlanNewCfgPvlanAddPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to the specified PVLAN. A '0' value is
returned when read."
::= { pvlanNewCfgTableEntry 5 }
pvlanNewCfgPvlanRemovePortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed to the specified PVLAN. A '0' value is
returned when read."
::= { pvlanNewCfgTableEntry 6 }
pvlanNewCfgPvlanPrio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of the PVLAN."
::= { pvlanNewCfgTableEntry 7 }
pvlanNewCfgPvlanState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable a PVLAN"
::= { pvlanNewCfgTableEntry 8 }
pvlanNewCfgPvlanTagPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be tagged for the specified PVLAN. A '0' value is
returned when read."
::= { pvlanNewCfgTableEntry 9 }
pvlanNewCfgPvlanUntagPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be untagged for the specified PVLAN. A '0' value is
returned when read."
::= { pvlanNewCfgTableEntry 10 }
pvlanNewCfgPvlanPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the PVLAN. The ports are presented in bitmap format."
::= { pvlanNewCfgTableEntry 11 }
pvlanNewCfgPvlanTagPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of tagged-PVLAN ports. The ports are presented in bitmap format."
::= { pvlanNewCfgTableEntry 12 }
pvlanNewCfgPvlanDelete OBJECT-TYPE
SYNTAX INTEGER {
delete(2),
no(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete a PVLAN"
::= { pvlanNewCfgTableEntry 13 }
pvlanNewCfgPvlanPredefProto OBJECT-TYPE
SYNTAX INTEGER {
userDefined(0),
decEther2(1),
ipv4Ether2(2),
ipv6Ether2(3),
ipx802dot2(4),
ipx802dot3(5),
ipxEther2(6),
ipxSnap(7),
netbios(8),
rarpEther2(9),
sna802dot2(10),
snaEther2(11),
vinesEther2(12),
xnsEther2(13)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A predefined Protocol (setting EtherType and FrameType to
predefined values)."
::= { pvlanNewCfgTableEntry 14 }
pvlanNewCfgPvlanAddPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port alias to be added to the specified PVLAN. A '0' value is
returned when read."
::= { pvlanNewCfgTableEntry 15 }
pvlanNewCfgPvlanRemovePortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port alias to be removed to the specified PVLAN. A '0' value is
returned when read."
::= { pvlanNewCfgTableEntry 16 }
pvlanNewCfgPvlanTagPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port alias to be tagged for the specified PVLAN. A '0' value is
returned when read."
::= { pvlanNewCfgTableEntry 17 }
pvlanNewCfgPvlanUntagPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port alias to be untagged for the specified PVLAN. A '0' value is
returned when read."
::= { pvlanNewCfgTableEntry 18 }
-- Link Aggregation Control Protocol Group
lacpCurSystemPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { lacp 1 }
lacpNewSystemPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 2-octet read-write value indicating the priority
value associated with the Actor's System ID."
::= { lacp 2 }
lacpCurSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { lacp 5 }
lacpNewSystemTimeoutTime OBJECT-TYPE
SYNTAX INTEGER {
short(3),
long(90)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3)."
::= { lacp 6 }
lacpCurPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { lacp 7 }
lacpCurPortCfgTableEntry OBJECT-TYPE
SYNTAX LacpCurPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { lacpCurPortCfgTableId }
::= { lacpCurPortCfgTable 1 }
LacpCurPortCfgTableEntry ::= SEQUENCE {
lacpCurPortCfgTableId PortNumber,
lacpCurPortState INTEGER,
lacpCurPortActorPortPriority INTEGER,
lacpCurPortActorAdminKey INTEGER
, lacpCurPortActorMinLinks INTEGER
, lacpCurPortSuspendIndividual INTEGER
,lacpCurPortAlias DisplayString
}
lacpCurPortCfgTableId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port number."
::= { lacpCurPortCfgTableEntry 1 }
lacpCurPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { lacpCurPortCfgTableEntry 2 }
lacpCurPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-only."
::= { lacpCurPortCfgTableEntry 3 }
lacpCurPortActorAdminKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance."
::= { lacpCurPortCfgTableEntry 4 }
lacpCurPortActorMinLinks OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current minimum links for the Aggregation Port.
This is a 16-bit read-only value. The meaning of
particular Key values is of local significance."
::= { lacpCurPortCfgTableEntry 5 }
lacpCurPortSuspendIndividual OBJECT-TYPE
SYNTAX INTEGER {
suspend(1),
individual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)"
::= { lacpCurPortCfgTableEntry 6 }
lacpCurPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port alias."
::= { lacpCurPortCfgTableEntry 7 }
lacpNewPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port configuration."
::= { lacp 8 }
lacpNewPortCfgTableEntry OBJECT-TYPE
SYNTAX LacpNewPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LACP port configuration table."
INDEX { lacpNewPortCfgTableId }
::= { lacpNewPortCfgTable 1 }
LacpNewPortCfgTableEntry ::= SEQUENCE {
lacpNewPortCfgTableId PortNumber,
lacpNewPortState INTEGER,
lacpNewPortActorPortPriority INTEGER,
lacpNewPortActorAdminKey INTEGER,
lacpNewPortActorMinLinks INTEGER,
lacpNewPortSetToDefault INTEGER
, lacpNewPortSuspendIndividual INTEGER
,lacpNewPortAlias DisplayString
}
lacpNewPortCfgTableId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port number."
::= { lacpNewPortCfgTableEntry 1 }
lacpNewPortState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
active(2),
passive(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer."
::= { lacpNewPortCfgTableEntry 2 }
lacpNewPortActorPortPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority value assigned to this Aggregation Port.
This 16-bit value is read-write."
::= { lacpNewPortCfgTableEntry 3 }
lacpNewPortActorAdminKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance."
::= { lacpNewPortCfgTableEntry 4 }
lacpNewPortActorMinLinks OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current minimum links for the Aggregation Port.
This is a 16-bit read-write value. The meaning of
particular Key values is of local significance."
::= { lacpNewPortCfgTableEntry 5 }
lacpNewPortSetToDefault OBJECT-TYPE
SYNTAX INTEGER {
none(1),
setDefault(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When read, always returns none(1).
When setting setDefault(2) value, the LACP port settings
are set to the default values."
::= { lacpNewPortCfgTableEntry 6 }
lacpNewPortSuspendIndividual OBJECT-TYPE
SYNTAX INTEGER {
suspend(1),
individual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates if the port can be treated as an individual
link when it does not get LACPDU from the peer port.
suspend (can't be treated as a normal link)
individual (can be treated as a normal link)"
::= { lacpNewPortCfgTableEntry 7 }
lacpNewPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" LACP port alias."
::= { lacpNewPortCfgTableEntry 8 }
lacpDeleteTrunk OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete a trunk with specified admin key"
::= { lacp 9 }
lacpNewSystemSetToDefault OBJECT-TYPE
SYNTAX INTEGER {
none(1),
setDefault(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When read, always returns none(1).
When setting setDefault(2) value, the LACP system settings
are set to the default values."
::= { lacp 10 }
-- Trunk Group Group
trunkGroupTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in trunk group table."
::= { trunkgroup 1 }
trunkGroupCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration."
::= { trunkgroup 2 }
trunkGroupCurCfgTableEntry OBJECT-TYPE
SYNTAX TrunkGroupCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table."
INDEX { trunkGroupCurCfgIndex }
::= { trunkGroupCurCfgTable 1 }
TrunkGroupCurCfgTableEntry ::= SEQUENCE {
trunkGroupCurCfgIndex Integer32,
trunkGroupCurCfgPorts OCTET STRING,
trunkGroupCurCfgState INTEGER
}
trunkGroupCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupCurCfgTableEntry 1 }
trunkGroupCurCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupCurCfgTableEntry 2 }
trunkGroupCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable a trunk group."
::= { trunkGroupCurCfgTableEntry 3 }
trunkGroupNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group configuration."
::= { trunkgroup 3 }
trunkGroupNewCfgTableEntry OBJECT-TYPE
SYNTAX TrunkGroupNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the trunk group configuration table."
INDEX { trunkGroupNewCfgIndex }
::= { trunkGroupNewCfgTable 1 }
TrunkGroupNewCfgTableEntry ::= SEQUENCE {
trunkGroupNewCfgIndex Integer32,
trunkGroupNewCfgPorts OCTET STRING,
trunkGroupNewCfgAddPortIndex PortNumber,
trunkGroupNewCfgRemovePortIndex PortNumber,
trunkGroupNewCfgState INTEGER,
trunkGroupNewCfgDelete INTEGER
,trunkGroupNewCfgAddPortAlias DisplayString
,trunkGroupNewCfgRemovePortAlias DisplayString
}
trunkGroupNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupNewCfgTableEntry 1 }
trunkGroupNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupNewCfgTableEntry 2 }
trunkGroupNewCfgAddPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added in the trunk group. When read, 0 is returned."
::= { trunkGroupNewCfgTableEntry 3 }
trunkGroupNewCfgRemovePortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be deleted from the trunk group. when read, 0
is returned."
::= { trunkGroupNewCfgTableEntry 4 }
trunkGroupNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable or disable a trunk group."
::= { trunkGroupNewCfgTableEntry 5 }
trunkGroupNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { trunkGroupNewCfgTableEntry 6 }
trunkGroupNewCfgAddPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port alias to be added in the trunk group. When read, 0 is returned."
::= { trunkGroupNewCfgTableEntry 7 }
trunkGroupNewCfgRemovePortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port alias to be deleted from the trunk group. when read, 0
is returned."
::= { trunkGroupNewCfgTableEntry 8 }
l2ThashCurCfgSmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable smac hash for traffic."
::= { thashL2L3 1 }
l2ThashNewCfgSmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable smac hash for traffic."
::= { thashL2L3 2 }
l2ThashCurCfgDmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable dmac hash for traffic."
::= { thashL2L3 3 }
l2ThashNewCfgDmacState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable dmac hash for traffic."
::= { thashL2L3 4 }
l3ThashCurCfgIpUseL2State OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable L2 hash for IP traffic."
::= { thashL2L3 5 }
l3ThashNewCfgIpUseL2State OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable L2 hash for IP traffic."
::= { thashL2L3 6 }
l3ThashCurCfgSipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable sip hash for IP traffic."
::= { thashL2L3 7 }
l3ThashNewCfgSipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable sip hash for IP traffic."
::= { thashL2L3 8 }
l3ThashCurCfgDipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable dip hash for IP traffic."
::= { thashL2L3 9 }
l3ThashNewCfgDipState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable dip hash for IP traffic."
::= { thashL2L3 10 }
l2ThashCurCfgIngressState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable ingres port hash."
::= { thashL2L3 11 }
l2ThashNewCfgIngressState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable ingres port hash."
::= { thashL2L3 12 }
l3ThashCurCfgL4PortState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable L4 port hash."
::= { thashL2L3 13 }
l3ThashNewCfgL4PortState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable L4 port hash."
::= { thashL2L3 14 }
-- Spanning Tree Group Configuration
-- This group specifies the additional configurations that are not
-- covered by the Bridge MIB (RFC 1493).
-- The relative Spanning Tree information can be retrieved or configured
-- using Bridge MIB with an unique community string for each group specified
-- in entLogicalTable of Entity MIB (RFC 2037).
--
stgCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group configuration."
::= { stgCfg 1 }
stgCurCfgTableEntry OBJECT-TYPE
SYNTAX StgCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration."
INDEX { stgCurCfgIndex }
::= { stgCurCfgTable 1 }
StgCurCfgTableEntry ::= SEQUENCE {
stgCurCfgIndex Integer32,
stgCurCfgState INTEGER,
stgCurCfgPriority INTEGER,
stgCurCfgBrgHelloTime INTEGER,
stgCurCfgBrgForwardDelay INTEGER,
stgCurCfgBrgMaxAge INTEGER,
stgCurCfgVlanBmap OCTET STRING
}
stgCurCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgCurCfgTableEntry 1 }
stgCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group."
::= { stgCurCfgTableEntry 2 }
stgCurCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID."
::= { stgCurCfgTableEntry 5 }
stgCurCfgBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root."
::= { stgCurCfgTableEntry 6 }
stgCurCfgBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { stgCurCfgTableEntry 7 }
stgCurCfgBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { stgCurCfgTableEntry 8 }
stgCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgCurCfgTableEntry 10 }
stgNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Groups configuration in the new_config."
::= { stgCfg 2 }
stgNewCfgTableEntry OBJECT-TYPE
SYNTAX StgNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group configuration."
INDEX { stgNewCfgIndex }
::= { stgNewCfgTable 1 }
StgNewCfgTableEntry ::= SEQUENCE {
stgNewCfgIndex Integer32,
stgNewCfgState INTEGER,
stgNewCfgDefaultCfg INTEGER,
stgNewCfgAddVlan Integer32,
stgNewCfgRemoveVlan Integer32,
stgNewCfgPriority INTEGER,
stgNewCfgBrgHelloTime INTEGER,
stgNewCfgBrgForwardDelay INTEGER,
stgNewCfgBrgMaxAge INTEGER,
stgNewCfgVlanBmap OCTET STRING,
stgNewCfgRemoveAllVlan INTEGER
}
stgNewCfgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgNewCfgTableEntry 1 }
stgNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular Spanning
Tree Group."
::= { stgNewCfgTableEntry 2 }
stgNewCfgDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default-config(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything."
::= { stgNewCfgTableEntry 3 }
stgNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read."
::= {stgNewCfgTableEntry 4 }
stgNewCfgRemoveVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read."
::= { stgNewCfgTableEntry 5 }
stgNewCfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID."
::= { stgNewCfgTableEntry 8 }
stgNewCfgBrgHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for HelloTime when this
bridge is acting as the root."
::= { stgNewCfgTableEntry 9 }
stgNewCfgBrgForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { stgNewCfgTableEntry 10 }
stgNewCfgBrgMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { stgNewCfgTableEntry 11 }
stgNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree"
::= { stgNewCfgTableEntry 13 }
stgNewCfgRemoveAllVlan OBJECT-TYPE
SYNTAX INTEGER {
default-config(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The all vlans to be removed from the specified Spanning Tree Group.
A '0' value is returned when read."
::= { stgNewCfgTableEntry 14 }
stgCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port configuration in the
current_config."
::= { stgCfg 3 }
stgCurCfgPortTableEntry OBJECT-TYPE
SYNTAX StgCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration of a particular Spanning Tree
Group."
INDEX { stgCurCfgStgIndex, stgCurCfgPortIndex }
::= { stgCurCfgPortTable 1 }
StgCurCfgPortTableEntry ::= SEQUENCE {
stgCurCfgStgIndex Integer32,
stgCurCfgPortIndex PortNumber,
stgCurCfgPortPriority INTEGER,
stgCurCfgPortPathCost Integer32,
stgCurCfgPortState INTEGER
,stgCurCfgPortAlias DisplayString
}
stgCurCfgStgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgCurCfgPortTableEntry 1 }
stgCurCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgCurCfgPortTableEntry 2 }
stgCurCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group."
::= { stgCurCfgPortTableEntry 3 }
stgCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID."
::= { stgCurCfgPortTableEntry 4 }
stgCurCfgPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port (
range is (0..200000000) )."
::= { stgCurCfgPortTableEntry 5 }
stgCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias of a particular Spanning Tree Group."
::= { stgCurCfgPortTableEntry 8 }
stgNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port configuration in the
new_config."
::= { stgCfg 4 }
stgNewCfgPortTableEntry OBJECT-TYPE
SYNTAX StgNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration of a particular Spanning Tree
Group."
INDEX { stgNewCfgStgIndex, stgNewCfgPortIndex }
::= { stgNewCfgPortTable 1 }
StgNewCfgPortTableEntry ::= SEQUENCE {
stgNewCfgStgIndex Integer32,
stgNewCfgPortIndex PortNumber,
stgNewCfgPortPriority INTEGER,
stgNewCfgPortPathCost Integer32,
stgNewCfgPortState INTEGER
,stgNewCfgPortAlias DisplayString
}
stgNewCfgStgIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stgNewCfgPortTableEntry 1 }
stgNewCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgNewCfgPortTableEntry 2 }
stgNewCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Turn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group."
::= { stgNewCfgPortTableEntry 3 }
stgNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID."
::= { stgNewCfgPortTableEntry 4 }
stgNewCfgPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port (
range is (0..200000000) )."
::= { stgNewCfgPortTableEntry 5 }
stgNewCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias of a particular Spanning Tree Group."
::= { stgNewCfgPortTableEntry 8 }
-- Complete Port Mirroring
pmCurCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { mirrPortMirr 1 }
pmNewCfgPortMirrState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of port-based port mirroring."
::= { mirrPortMirr 2 }
pmCurCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmCurCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { mirrPortMirr 3 }
pmCurCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmCurCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmCurCfgPmirrMoniPortIndex, pmCurCfgPmirrMirrPortIndex }
::= { pmCurCfgPortMonitorTable 1 }
PmCurCfgPortMonitorEntry ::= SEQUENCE {
pmCurCfgPmirrMoniPortIndex PortNumber,
pmCurCfgPmirrMirrPortIndex PortNumber,
pmCurCfgPmirrDirection INTEGER
,pmCurCfgPmirrMoniPortAlias DisplayString
,pmCurCfgPmirrMirrPortAlias DisplayString
}
pmCurCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmCurCfgPortMonitorEntry 1 }
pmCurCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmCurCfgPortMonitorEntry 2 }
pmCurCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmCurCfgPortMonitorEntry 3 }
pmCurCfgPmirrMoniPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port alias."
::= { pmCurCfgPortMonitorEntry 7 }
pmCurCfgPmirrMirrPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port alias."
::= { pmCurCfgPortMonitorEntry 8 }
pmNewCfgPortMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of monitoring ports."
::= { mirrPortMirr 4 }
pmNewCfgPortMonitorEntry OBJECT-TYPE
SYNTAX PmNewCfgPortMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the monitoring port table."
INDEX { pmNewCfgPmirrMoniPortIndex, pmNewCfgPmirrMirrPortIndex }
::= { pmNewCfgPortMonitorTable 1 }
PmNewCfgPortMonitorEntry ::= SEQUENCE {
pmNewCfgPmirrMoniPortIndex PortNumber,
pmNewCfgPmirrMirrPortIndex PortNumber,
pmNewCfgPmirrDirection INTEGER,
pmNewCfgPmirrDelete INTEGER,
pmNewCfgPmonDelete INTEGER
,pmNewCfgPmirrMoniPortAlias DisplayString
,pmNewCfgPmirrMirrPortAlias DisplayString
}
pmNewCfgPmirrMoniPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port number."
::= { pmNewCfgPortMonitorEntry 1 }
pmNewCfgPmirrMirrPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port number"
::= { pmNewCfgPortMonitorEntry 2 }
pmNewCfgPmirrDirection OBJECT-TYPE
SYNTAX INTEGER {
in(1),
out(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of traffic to be monitored with respect to the
mirrored port."
::= { pmNewCfgPortMonitorEntry 3 }
pmNewCfgPmirrDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the entire
row. When read, other(1) is returned."
::= { pmNewCfgPortMonitorEntry 4 }
pmNewCfgPmonDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting the value to delete(2) will delete the monitor
port. When read, other(1) is returned."
::= { pmNewCfgPortMonitorEntry 10 }
pmNewCfgPmirrMoniPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The monitoring port alias."
::= { pmNewCfgPortMonitorEntry 11 }
pmNewCfgPmirrMirrPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirrored port alias."
::= { pmNewCfgPortMonitorEntry 12 }
-- MST Configuration
mstCurCfgRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Name for the Region's configuration."
::= { mstGeneralCfg 3 }
mstNewCfgRegionName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Name for the Region's configuration."
::= { mstGeneralCfg 4 }
mstCurCfgRegionRevision OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Revision of the MST Region."
::= { mstGeneralCfg 5 }
mstNewCfgRegionRevision OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Revision of the MST Region."
::= { mstGeneralCfg 6 }
mstCurCfgMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { mstGeneralCfg 7 }
mstNewCfgMaxHopCount OBJECT-TYPE
SYNTAX INTEGER (4..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the maximum hop count value."
::= { mstGeneralCfg 8 }
mstCurCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
mstp(1),
rstp(2),
pvrst(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocal the bridge is currently
running."
::= { mstGeneralCfg 9 }
mstNewCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
mstp(1),
rstp(2),
pvrst(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The version of Spanning Tree Protocal the bridge is currently
running."
::= { mstGeneralCfg 10 }
mstCistDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
default(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value to default(1) will set the Multiple
Spanning Tree and member parameters to default. default(1) is
always returned when read, but it does not mean anything."
::= { mstCistCfg 1 }
-- CIST Brige Configuration
mstCistBridgeCfg OBJECT IDENTIFIER ::= { mstCistCfg 2 }
mstCistCurCfgBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { mstCistBridgeCfg 1 }
mstCistNewCfgBridgePriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the writable portion of the Brigde Identifier comprising
of the first two octets."
::= { mstCistBridgeCfg 2 }
mstCistCurCfgBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { mstCistBridgeCfg 5 }
mstCistNewCfgBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { mstCistBridgeCfg 6 }
mstCistCurCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { mstCistBridgeCfg 7 }
mstCistNewCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER (4..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { mstCistBridgeCfg 8 }
mstCistCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group"
::= { mstCistBridgeCfg 9 }
mstCistNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the group"
::= { mstCistBridgeCfg 10 }
mstCistNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan to be added to the CIST Group. A
'0' value is returned when read."
::= { mstCistBridgeCfg 11 }
-- CIST Port Configuration
mstCistCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port configuration."
::= { mstCistCfg 3 }
mstCistCurCfgPortTableEntry OBJECT-TYPE
SYNTAX MstCistCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port configuration."
INDEX { mstCistCurCfgPortIndex }
::= { mstCistCurCfgPortTable 1 }
MstCistCurCfgPortTableEntry ::= SEQUENCE {
mstCistCurCfgPortIndex PortNumber,
mstCistCurCfgPortPriority INTEGER,
mstCistCurCfgPortPathCost INTEGER,
mstCistCurCfgPortLinkType INTEGER,
mstCistCurCfgPortEdge INTEGER,
mstCistCurCfgPortStpState INTEGER,
mstCistCurCfgPortHelloTime INTEGER
, mstCistCurCfgPortPvstProtection INTEGER
,mstCistCurCfgPortAlias DisplayString
}
mstCistCurCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { mstCistCurCfgPortTableEntry 1 }
mstCistCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { mstCistCurCfgPortTableEntry 2 }
mstCistCurCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { mstCistCurCfgPortTableEntry 3 }
mstCistCurCfgPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
p2p(2),
shared(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means. (for MSTP only)"
::= { mstCistCurCfgPortTableEntry 4 }
mstCistCurCfgPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Edge Port parameter. (for MSTP only)"
::= { mstCistCurCfgPortTableEntry 5 }
mstCistCurCfgPortStpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Turn port's Spanning Tree on/off."
::= { mstCistCurCfgPortTableEntry 6 }
mstCistCurCfgPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { mstCistCurCfgPortTableEntry 7 }
mstCistCurCfgPortPvstProtection OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the PVST Protection parameter."
::= { mstCistCurCfgPortTableEntry 8 }
mstCistCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias of the port for which this entry contains spanning
tree configuration."
::= { mstCistCurCfgPortTableEntry 9 }
mstCistNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstCistNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port configuration."
::= { mstCistCfg 4 }
mstCistNewCfgPortTableEntry OBJECT-TYPE
SYNTAX MstCistNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port configuration."
INDEX { mstCistNewCfgPortIndex }
::= { mstCistNewCfgPortTable 1 }
MstCistNewCfgPortTableEntry ::= SEQUENCE {
mstCistNewCfgPortIndex PortNumber,
mstCistNewCfgPortPriority INTEGER,
mstCistNewCfgPortPathCost INTEGER,
mstCistNewCfgPortStpState INTEGER,
mstCistNewCfgPortHelloTime INTEGER
, mstCistNewCfgPortPvstProtection INTEGER
,mstCistNewCfgPortAlias DisplayString
}
mstCistNewCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { mstCistNewCfgPortTableEntry 1 }
mstCistNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { mstCistNewCfgPortTableEntry 2 }
mstCistNewCfgPortPathCost OBJECT-TYPE
SYNTAX INTEGER (0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { mstCistNewCfgPortTableEntry 3 }
mstCistNewCfgPortStpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Turn port's Spanning Tree on/off."
::= { mstCistNewCfgPortTableEntry 6 }
mstCistNewCfgPortHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration Port
PDUs in seconds."
::= { mstCistNewCfgPortTableEntry 7 }
mstCistNewCfgPortPvstProtection OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the PVST Protection parameter."
::= { mstCistNewCfgPortTableEntry 8 }
mstCistNewCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias of the port for which this entry contains spanning
tree configuration."
::= { mstCistNewCfgPortTableEntry 9 }
-- L2 general
pvstCompatibilityCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable PVST+ compatibility"
::= { l2GeneralCfg 9 }
pvstCompatibilityNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable PVST+ compatibility"
::= { l2GeneralCfg 10 }
nostpCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STP Mode Disable global state."
::= { l2GeneralCfg 11 }
nostpNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable STP Mode Disable."
::= { l2GeneralCfg 12 }
stpLoopGuardCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STP loop guard global state."
::= { l2GeneralCfg 13 }
stpLoopGuardNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable STP loop guard."
::= { l2GeneralCfg 14 }
vlanAutoStgCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VLAN automatic STG assignment global state."
::= { l2GeneralCfg 15 }
vlanAutoStgNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable VLAN automatic STG assignment."
::= { l2GeneralCfg 16 }
--
-- { LLDP Port Table
--
lldpPortTableMaxEnt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the port configuration
host table."
::= { lldpCfg 1 }
lldpCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpCurCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP port configuration in the current_configuration
block."
::= { lldpCfg 2 }
lldpCurCfgPortEntry OBJECT-TYPE
SYNTAX LldpCurCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LLDP port configuration table in the
current_configuration block."
INDEX { lldpCurCfgPortIndx }
::= { lldpCurCfgPortTable 1 }
LldpCurCfgPortEntry ::= SEQUENCE {
lldpCurCfgPortIndx PortNumber,
lldpCurCfgPortAdmStat INTEGER,
lldpCurCfgPortSnmpTrap INTEGER
,lldpCurCfgPortportdesctlv INTEGER
,lldpCurCfgPortsysnametlv INTEGER
,lldpCurCfgPortsysdescrtlv INTEGER
,lldpCurCfgPortsyscaptlv INTEGER
,lldpCurCfgPortmgmtaddrtlv INTEGER
,lldpCurCfgPortportvidtlv INTEGER
,lldpCurCfgPortportprottlv INTEGER
,lldpCurCfgPortvlannametlv INTEGER
,lldpCurCfgPortprotidtlv INTEGER
,lldpCurCfgPortmacphytlv INTEGER
,lldpCurCfgPortpowermditlv INTEGER
,lldpCurCfgPortlinkaggrtlv INTEGER
,lldpCurCfgPortframesztlv INTEGER
,lldpCurCfgPortAlias DisplayString
}
lldpCurCfgPortIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP port configurations table."
::= { lldpCurCfgPortEntry 1 }
lldpCurCfgPortAdmStat OBJECT-TYPE
SYNTAX INTEGER {
enabledTxOnly(1),
enabledRxOnly(2),
enabledRxTx(3),
disabled(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the admin status of the LLDP port."
::= { lldpCurCfgPortEntry 2 }
lldpCurCfgPortSnmpTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the SNMP trap notification state of the LLDP port."
::= { lldpCurCfgPortEntry 3 }
lldpCurCfgPortportdesctlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port Description TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 4 }
lldpCurCfgPortsysnametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Name TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 5 }
lldpCurCfgPortsysdescrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Description TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 6 }
lldpCurCfgPortsyscaptlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Capabilities TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 7 }
lldpCurCfgPortmgmtaddrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Management Address TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 8 }
lldpCurCfgPortportvidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port VLAN ID TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 9 }
lldpCurCfgPortportprottlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port and Protocol VLAN ID TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 10 }
lldpCurCfgPortvlannametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the VLAN Name TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 11 }
lldpCurCfgPortprotidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Protocol Identity TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 12 }
lldpCurCfgPortmacphytlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the MAC/PHY Configuration/Status TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 13 }
lldpCurCfgPortpowermditlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Power Via MDI TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 14 }
lldpCurCfgPortlinkaggrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Link Aggregation TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 15 }
lldpCurCfgPortframesztlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Maximum Frame Size TLV state of the LLDP port."
::= { lldpCurCfgPortEntry 16 }
lldpCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alias of the row in LLDP port configurations table."
::= { lldpCurCfgPortEntry 20 }
lldpNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpNewCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP port configuration in the new_configuration
block."
::= { lldpCfg 3 }
lldpNewCfgPortEntry OBJECT-TYPE
SYNTAX LldpNewCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the LLDP port configuration table in the
new_configuration block."
INDEX { lldpNewCfgPortIndx }
::= { lldpNewCfgPortTable 1 }
LldpNewCfgPortEntry ::= SEQUENCE {
lldpNewCfgPortIndx PortNumber,
lldpNewCfgPortAdmStat INTEGER,
lldpNewCfgPortSnmpTrap INTEGER
,lldpNewCfgPortportdesctlv INTEGER
,lldpNewCfgPortsysnametlv INTEGER
,lldpNewCfgPortsysdescrtlv INTEGER
,lldpNewCfgPortsyscaptlv INTEGER
,lldpNewCfgPortmgmtaddrtlv INTEGER
,lldpNewCfgPortportvidtlv INTEGER
,lldpNewCfgPortportprottlv INTEGER
,lldpNewCfgPortvlannametlv INTEGER
,lldpNewCfgPortprotidtlv INTEGER
,lldpNewCfgPortmacphytlv INTEGER
,lldpNewCfgPortpowermditlv INTEGER
,lldpNewCfgPortlinkaggrtlv INTEGER
,lldpNewCfgPortframesztlv INTEGER
,lldpNewCfgPortalltlv INTEGER
,lldpNewCfgPortAlias DisplayString
}
lldpNewCfgPortIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP port configurations table."
::= { lldpNewCfgPortEntry 1 }
lldpNewCfgPortAdmStat OBJECT-TYPE
SYNTAX INTEGER {
enabledTxOnly(1),
enabledRxOnly(2),
enabledRxTx(3),
disabled(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the admin status of the LLDP port."
::= { lldpNewCfgPortEntry 2 }
lldpNewCfgPortSnmpTrap OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the SNMP trap notification state of the LLDP port"
::= { lldpNewCfgPortEntry 3 }
lldpNewCfgPortportdesctlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Port Description TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 4 }
lldpNewCfgPortsysnametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the System Name TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 5 }
lldpNewCfgPortsysdescrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the System Description TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 6 }
lldpNewCfgPortsyscaptlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the System Capabilities TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 7 }
lldpNewCfgPortmgmtaddrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Management Address TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 8 }
lldpNewCfgPortportvidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Port VLAN ID TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 9 }
lldpNewCfgPortportprottlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Port and Protocol VLAN ID TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 10 }
lldpNewCfgPortvlannametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the VLAN Name TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 11 }
lldpNewCfgPortprotidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Protocol Identity TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 12 }
lldpNewCfgPortmacphytlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the MAC/PHY Configuration/Status TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 13 }
lldpNewCfgPortpowermditlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Power Via MDI TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 14 }
lldpNewCfgPortlinkaggrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Link Aggregation TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 15 }
lldpNewCfgPortframesztlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Maximum Frame Size TLV state of the LLDP port."
::= { lldpNewCfgPortEntry 16 }
lldpNewCfgPortalltlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
other(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the corresponding state for all the LLDP port's TLVs.
other(3) is returned when the object is read."
::= { lldpNewCfgPortEntry 17 }
lldpNewCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port of the row in LLDP port configurations table."
::= { lldpNewCfgPortEntry 20 }
--
-- } End of LLDP Port Table
--
--
-- { LLDP General Table
--
lldpGeneral OBJECT IDENTIFIER ::= { lldpCfg 4 }
lldpCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP global state."
::= { lldpGeneral 1 }
lldpNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn LLDP on or off."
::= { lldpGeneral 2 }
lldpCurCfgMsgTxInt OBJECT-TYPE
SYNTAX INTEGER (5..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP message transmission interval for LLDPDU."
::= { lldpGeneral 3 }
lldpNewCfgMsgTxInt OBJECT-TYPE
SYNTAX INTEGER (5..32768)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP message transmission interval for LLDPDU."
::= { lldpGeneral 4 }
lldpCurCfgMsgTxHld OBJECT-TYPE
SYNTAX INTEGER (2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP message transmission holdtime-multiplier."
::= { lldpGeneral 5 }
lldpNewCfgMsgTxHld OBJECT-TYPE
SYNTAX INTEGER (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP message transmission holdtime-multiplier."
::= { lldpGeneral 6 }
lldpCurCfgNotifInt OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP minimum SNMP trap notification interval."
::= { lldpGeneral 7 }
lldpNewCfgNotifInt OBJECT-TYPE
SYNTAX INTEGER (1..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP minimum SNMP trap notification interval."
::= { lldpGeneral 8 }
lldpCurCfgTxDelay OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP delay interval between advertisements."
::= { lldpGeneral 9 }
lldpNewCfgTxDelay OBJECT-TYPE
SYNTAX INTEGER (1..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP delay interval between advertisements."
::= { lldpGeneral 10 }
lldpCurCfgReinitDelay OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LLDP reinit delay interval."
::= { lldpGeneral 11 }
lldpNewCfgReinitDelay OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LLDP reinit delay interval."
::= { lldpGeneral 12 }
--
-- } End of LLDP General Table
--
--
-- { LLDP Statistics
--
lldpStatsTableMaxEnt OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the statistics
host table."
::= { lldpStats 1 }
lldpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP statistics."
::= { lldpStats 2 }
lldpStatsClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the LLDP statistics
for all the ports."
::= { lldpStats 3 }
lldpStatsTableEntry OBJECT-TYPE
SYNTAX LldpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP statistics info."
INDEX { lldpStatsIndex }
::= { lldpStatsTable 1 }
LldpStatsTableEntry ::= SEQUENCE {
lldpStatsIndex PortNumber,
lldpStatsFramesOutTotal Counter32,
lldpStatsFramesInTotal Counter32,
lldpStatsFramesInErrorsTotal Counter32,
lldpStatsFramesDiscardedTotal Counter32,
lldpStatsTLVsUnrecognizedTotal Counter32,
lldpStatsAgeoutsTotal Counter32,
lldpStatsClear INTEGER
,lldpStatsPortAlias DisplayString
}
lldpStatsIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP port statistics."
::= { lldpStatsTableEntry 1 }
lldpStatsFramesOutTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LLDP frames transmitted in this port."
::= { lldpStatsTableEntry 2 }
lldpStatsFramesInTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LLDP frames received in this port."
::= { lldpStatsTableEntry 3 }
lldpStatsFramesInErrorsTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of erroneous LLDP frames received in this port."
::= { lldpStatsTableEntry 4 }
lldpStatsFramesDiscardedTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received LLDP frames discarded in this port."
::= { lldpStatsTableEntry 5 }
lldpStatsTLVsUnrecognizedTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized TLVs in this port."
::= { lldpStatsTableEntry 6 }
lldpStatsAgeoutsTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of neighbor's information deleted in this port."
::= { lldpStatsTableEntry 7 }
lldpStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the LLDP statistics."
::= { lldpStatsTableEntry 8 }
lldpStatsPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alias of the row in LLDP port statistics."
::= { lldpStatsTableEntry 9 }
--
-- } End of LLDP Statistics
--
--
-- { LLDP Info
--
lldpInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP Port Info."
::= { lldpInfo 1 }
lldpInfoPortEntry OBJECT-TYPE
SYNTAX LldpInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP Port Info."
INDEX { lldpInfoPortIndex }
::= { lldpInfoPortTable 1 }
LldpInfoPortEntry ::= SEQUENCE {
lldpInfoPortIndex PortNumber,
lldpInfoPortAlias DisplayString,
lldpInfoPortMacAddress PhysAddress,
lldpInfoPortMtu Integer32,
lldpInfoPortEnabled INTEGER,
lldpInfoPortAdminStatus INTEGER,
lldpInfoPortRxChanges INTEGER
,lldpInfoPortportdesctlv INTEGER
,lldpInfoPortsysnametlv INTEGER
,lldpInfoPortsysdescrtlv INTEGER
,lldpInfoPortsyscaptlv INTEGER
,lldpInfoPortmgmtaddrtlv INTEGER
,lldpInfoPortportvidtlv INTEGER
,lldpInfoPortportprottlv INTEGER
,lldpInfoPortvlannametlv INTEGER
,lldpInfoPortprotidtlv INTEGER
,lldpInfoPortmacphytlv INTEGER
,lldpInfoPortpowermditlv INTEGER
,lldpInfoPortlinkaggrtlv INTEGER
,lldpInfoPortframesztlv INTEGER
}
lldpInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP info port table."
::= { lldpInfoPortEntry 1 }
lldpInfoPortAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias of the port in LLDP info port table."
::= { lldpInfoPortEntry 2 }
lldpInfoPortMacAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mac address of the port in LLDP info port table."
::= { lldpInfoPortEntry 3 }
lldpInfoPortMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MTU size of the port in LLDP info port table."
::= { lldpInfoPortEntry 4 }
lldpInfoPortEnabled OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PortEnabled field of the port in LLDP info port table."
::= { lldpInfoPortEntry 5 }
lldpInfoPortAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabledTxOnly(1),
enabledRxOnly(2),
enabledRxTx(3),
disabled(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Admin Status of the port in LLDP info port table."
::= { lldpInfoPortEntry 6 }
lldpInfoPortRxChanges OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rxChanges field of the port in LLDP info port table."
::= { lldpInfoPortEntry 7 }
lldpInfoPortportdesctlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port Description TLV state of the LLDP port."
::= { lldpInfoPortEntry 8 }
lldpInfoPortsysnametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Name TLV state of the LLDP port."
::= { lldpInfoPortEntry 9 }
lldpInfoPortsysdescrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Description TLV state of the LLDP port."
::= { lldpInfoPortEntry 10 }
lldpInfoPortsyscaptlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the System Capabilities TLV state of the LLDP port."
::= { lldpInfoPortEntry 11 }
lldpInfoPortmgmtaddrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Management Address TLV state of the LLDP port."
::= { lldpInfoPortEntry 12 }
lldpInfoPortportvidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port VLAN ID TLV state of the LLDP port."
::= { lldpInfoPortEntry 13 }
lldpInfoPortportprottlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Port and Protocol VLAN ID TLV state of the LLDP port."
::= { lldpInfoPortEntry 14 }
lldpInfoPortvlannametlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the VLAN Name TLV state of the LLDP port."
::= { lldpInfoPortEntry 15 }
lldpInfoPortprotidtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Protocol Identity TLV state of the LLDP port."
::= { lldpInfoPortEntry 16 }
lldpInfoPortmacphytlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the MAC/PHY Configuration/Status TLV state of the LLDP port."
::= { lldpInfoPortEntry 17 }
lldpInfoPortpowermditlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Power Via MDI TLV state of the LLDP port."
::= { lldpInfoPortEntry 18 }
lldpInfoPortlinkaggrtlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Link Aggregation TLV state of the LLDP port."
::= { lldpInfoPortEntry 19 }
lldpInfoPortframesztlv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Maximum Frame Size TLV state of the LLDP port."
::= { lldpInfoPortEntry 20 }
lldpInfoTxTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpInfoTxEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP Transmit State Machine Info."
::= { lldpInfo 2 }
lldpInfoTxEntry OBJECT-TYPE
SYNTAX LldpInfoTxEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP Transmit State Machine Info."
INDEX { lldpInfoTxIndex }
::= { lldpInfoTxTable 1 }
LldpInfoTxEntry ::= SEQUENCE {
lldpInfoTxIndex PortNumber,
lldpInfoTxState INTEGER,
lldpInfoTxLocalChanged INTEGER,
lldpInfoTxTTL Integer32,
lldpInfoTxTxTTR Integer32,
lldpInfoTxDelayWhile Integer32,
lldpInfoTxShutdownWhile Integer32,
lldpInfoTxReinitDelay Integer32,
lldpInfoTxHoldMultiplier Integer32,
lldpInfoTxTransmitInterval Integer32,
lldpInfoTxTransmitDelay Integer32,
lldpInfoTxDMAC DisplayString
,lldpInfoTxPortAlias DisplayString
}
lldpInfoTxIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP Transmit State Machine info table."
::= { lldpInfoTxEntry 1 }
lldpInfoTxState OBJECT-TYPE
SYNTAX INTEGER {
txLldpInitialize(1),
txIdle(2),
txShutdownFrame(3),
txInfoFrame(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit state of the port in LLDP Transmit State Machine."
::= { lldpInfoTxEntry 2 }
lldpInfoTxLocalChanged OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The somethingChangedLocal field of the port in LLDP Transmit
State Machine."
::= { lldpInfoTxEntry 3 }
lldpInfoTxTTL OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The txTTL timer of the port in LLDP Transmit State Machine."
::= { lldpInfoTxEntry 4 }
lldpInfoTxTxTTR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The txTTR timer of the port in LLDP Transmit State Machine."
::= { lldpInfoTxEntry 5 }
lldpInfoTxDelayWhile OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The txDelayWhile timer of the port in LLDP Transmit State
Machine."
::= { lldpInfoTxEntry 6 }
lldpInfoTxShutdownWhile OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The txShutdownWhile timer of the port in LLDP Transmit State
Machine."
::= { lldpInfoTxEntry 7 }
lldpInfoTxReinitDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reinitDelay timer of the port in LLDP Transmit State
Machine."
::= { lldpInfoTxEntry 8 }
lldpInfoTxHoldMultiplier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The msgTxHold timer of the port in LLDP Transmit State
Machine."
::= { lldpInfoTxEntry 9 }
lldpInfoTxTransmitInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The msgTxInterval timer of the port in LLDP Transmit State
Machine."
::= { lldpInfoTxEntry 10 }
lldpInfoTxTransmitDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The txDelay timer of the port in LLDP Transmit State Machine."
::= { lldpInfoTxEntry 11 }
lldpInfoTxDMAC OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00"
::= { lldpInfoTxEntry 12 }
lldpInfoTxPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alias of the row in LLDP Transmit State Machine info table."
::= { lldpInfoTxEntry 13 }
lldpInfoRxTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpInfoRxEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP Receive State Machine Info."
::= { lldpInfo 3 }
lldpInfoRxEntry OBJECT-TYPE
SYNTAX LldpInfoRxEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP Receive State Machine Info."
INDEX { lldpInfoRxIndex }
::= { lldpInfoRxTable 1 }
LldpInfoRxEntry ::= SEQUENCE {
lldpInfoRxIndex PortNumber,
lldpInfoRxState INTEGER,
lldpInfoRxBadFrame INTEGER,
lldpInfoRxRcvFrame INTEGER,
lldpInfoRxRxInfoAge INTEGER,
lldpInfoRxRemoteChanged INTEGER,
lldpInfoRxTooManyNeighbors INTEGER,
lldpInfoRxSNMPNotify INTEGER,
lldpInfoRxRxTTL Integer32,
lldpInfoRxTooManyNeighborTimer Integer32,
lldpInfoRxDMAC DisplayString
,lldpInfoRxPortAlias DisplayString
}
lldpInfoRxIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP Receive State Machine info table."
::= { lldpInfoRxEntry 1 }
lldpInfoRxState OBJECT-TYPE
SYNTAX INTEGER {
lldpWaitPortOperational(1),
deleteAgedInfo(2),
rxLldpInitialize(3),
rxWaitForFrame(4),
rxFrame(5),
deleteInfo(6),
updateInfo(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive state of the port in LLDP Receive State Machine."
::= { lldpInfoRxEntry 2 }
lldpInfoRxBadFrame OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The badFrame field of the port in LLDP Receive State Machine."
::= { lldpInfoRxEntry 3 }
lldpInfoRxRcvFrame OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rcvFrame field of the port in LLDP Receive State Machine."
::= { lldpInfoRxEntry 4 }
lldpInfoRxRxInfoAge OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rxInfoAge field of the port in LLDP Receive State Machine."
::= { lldpInfoRxEntry 5 }
lldpInfoRxRemoteChanged OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The somethingChangedRemote field of the port in LLDP Receive
State Machine."
::= { lldpInfoRxEntry 6 }
lldpInfoRxTooManyNeighbors OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tooManyNeighbors field of the port in LLDP Receive
State Machine."
::= { lldpInfoRxEntry 7 }
lldpInfoRxSNMPNotify OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tooManyNeighbors field of the port in LLDP Receive
State Machine."
::= { lldpInfoRxEntry 8 }
lldpInfoRxRxTTL OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rxTTL timer of the port in LLDP Receive State Machine."
::= { lldpInfoRxEntry 9 }
lldpInfoRxTooManyNeighborTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tooManyNeighborsTimer timer of the port in LLDP Receive State
Machine."
::= { lldpInfoRxEntry 10 }
lldpInfoRxDMAC OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00"
::= { lldpInfoRxEntry 11 }
lldpInfoRxPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alias of the row in LLDP Receive State Machine info table."
::= { lldpInfoRxEntry 12 }
lldpInfoRemoteDevicesTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpInfoRemoteDevicesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP remote devices Info."
::= { lldpInfo 4 }
lldpInfoRemoteDevicesEntry OBJECT-TYPE
SYNTAX LldpInfoRemoteDevicesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP remote devices Info."
INDEX { lldpInfoRemoteDevicesIndex }
::= { lldpInfoRemoteDevicesTable 1 }
LldpInfoRemoteDevicesEntry ::= SEQUENCE {
lldpInfoRemoteDevicesIndex INTEGER,
lldpInfoRemoteDevicesRemoteTTL Integer32,
lldpInfoRemoteDevicesRxChanges INTEGER,
lldpInfoRemoteDevicesLocalPort DisplayString,
lldpInfoRemoteDevicesChassisSubtype INTEGER,
lldpInfoRemoteDevicesChassisId DisplayString,
lldpInfoRemoteDevicesPortSubtype INTEGER,
lldpInfoRemoteDevicesPortId DisplayString,
lldpInfoRemoteDevicesSystemName DisplayString,
lldpInfoRemoteDevicesSystemDescription DisplayString,
lldpInfoRemoteDevicesPortDescription DisplayString,
lldpInfoRemoteDevicesSystemCapSupported DisplayString,
lldpInfoRemoteDevicesSystemCapEnabled DisplayString,
lldpInfoRemoteDMAC DisplayString
}
lldpInfoRemoteDevicesIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in LLDP remote devices info table."
::= { lldpInfoRemoteDevicesEntry 1 }
-- lldpInfoMsapMagicNumber OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "The magic number of the LLDP MSAP entry."
-- ::= { lldpInfoRemoteDevicesEntry 2 }
lldpInfoRemoteDevicesRemoteTTL OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote TTL of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 3 }
lldpInfoRemoteDevicesRxChanges OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rxChanges field of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 4 }
lldpInfoRemoteDevicesLocalPort OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port alias of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 5 }
lldpInfoRemoteDevicesChassisSubtype OBJECT-TYPE
SYNTAX INTEGER {
chassisComponent(1),
interfaceAlias(2),
portComponent(3),
macAddress(4),
networkAddress(5),
interfaceName(6),
locallyAssigned(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The chassis ID subtype of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 6 }
lldpInfoRemoteDevicesChassisId OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The chassis ID of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 7 }
lldpInfoRemoteDevicesPortSubtype OBJECT-TYPE
SYNTAX INTEGER {
interfaceAlias(1),
portComponent(2),
macAddress(3),
networkAddress(4),
interfaceName(5),
agentCircuitId(6),
locallyAssigned(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port ID subtype of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 8 }
lldpInfoRemoteDevicesPortId OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port ID of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 9 }
lldpInfoRemoteDevicesSystemName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system name of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 10 }
lldpInfoRemoteDevicesSystemDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system description of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 11 }
lldpInfoRemoteDevicesPortDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port description of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 12 }
lldpInfoRemoteDevicesSystemCapSupported OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The supported system capabilities of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 13 }
lldpInfoRemoteDevicesSystemCapEnabled OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The enabled system capabilities of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesEntry 14 }
lldpInfoRemoteDMAC OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Destination MAC address of the LLDP remote devices.
Legend(possible values in DMAC column) :
NB - Nearest Bridge - 01-80-C2-00-00-0E
NnTB - Nearest non-TPMR Bridge - 01-80-C2-00-00-03
NCB - Nearest Customer Bridge - 01-80-C2-00-00-00"
::= { lldpInfoRemoteDevicesEntry 15 }
--
-- lldpInfoRemoteDevicesManAddrTable : Management addresses of remote system
--
lldpInfoRemoteDevicesManAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LldpInfoRemoteDevicesManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LLDP remote devices management address Info."
::= { lldpInfo 5 }
lldpInfoRemoteDevicesManAddrEntry OBJECT-TYPE
SYNTAX LldpInfoRemoteDevicesManAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"LLDP remote devices management address Info."
INDEX { lldpInfoRemoteDevicesIndex,
lldpInfoRemoteDevicesManAddrSubtype,
lldpInfoRemoteDevicesManAddr
}
::= { lldpInfoRemoteDevicesManAddrTable 1 }
LldpInfoRemoteDevicesManAddrEntry ::= SEQUENCE {
lldpInfoRemoteDevicesManAddrSubtype INTEGER,
lldpInfoRemoteDevicesManAddr DisplayString,
lldpInfoRemoteDevicesManAddrIfSubtype INTEGER,
lldpInfoRemoteDevicesManAddrIfId Integer32,
lldpInfoRemoteDevicesManAddrOID DisplayString
}
lldpInfoRemoteDevicesManAddrSubtype OBJECT-TYPE
SYNTAX INTEGER {
other(0),
ipV4(1),
ipV6(2),
nsap(3),
hdlc(4),
bbn1822(5),
all802(6),
e163(7),
e164(8),
f69(9),
x121(10),
ipx(11),
appletalk(12),
decnetIV(13),
banyanVines(14),
e164withNsap(15),
dns(16),
distinguishedname(17),
asnumber(18),
xtpoveripv4(19),
xtpoveripv6(20),
xtpnativemodextp(21),
reserved(65535)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management address subtype of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesManAddrEntry 1 }
lldpInfoRemoteDevicesManAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The management address of the LLDP remote devices entry."
::= { lldpInfoRemoteDevicesManAddrEntry 2 }
lldpInfoRemoteDevicesManAddrIfSubtype OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ifIndex(2),
systemPortNumber(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface numbering subtype of the LLDP remote devices
management address entry."
::= { lldpInfoRemoteDevicesManAddrEntry 3 }
lldpInfoRemoteDevicesManAddrIfId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number of the LLDP remote devices management address
entry."
::= { lldpInfoRemoteDevicesManAddrEntry 4 }
lldpInfoRemoteDevicesManAddrOID OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object identifier of the LLDP remote devices management address
entry."
::= { lldpInfoRemoteDevicesManAddrEntry 5 }
lldpClearMsap OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
clearMsap(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear LLDP remote devices information when setting clearMsap(1).
When read, ok(0) is always returned."
::= { lldpInfo 6 }
--
-- } End of LLDP Info
--
--
-- { UDLD
--
udldInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF UdldInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of UDLD port info."
::= { udldInfo 1 }
udldInfoPortEntry OBJECT-TYPE
SYNTAX UdldInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row inside UDLD port info table."
INDEX { udldInfoPortIndex }
::= { udldInfoPortTable 1 }
UdldInfoPortEntry ::= SEQUENCE
{ udldInfoPortIndex PortNumber
, udldInfoPortConfig INTEGER
, udldInfoPortMode INTEGER
, udldInfoPortLink INTEGER
, udldInfoPortOperationalStatus INTEGER
, udldInfoPortBidirectionalStatus INTEGER
, udldInfoPortInterval INTEGER
, udldInfoPortTimeout INTEGER
, udldInfoPortNeighborCount INTEGER
, udldInfoPortAlias DisplayString
}
udldInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the row in UDLD port configuration table."
::= { udldInfoPortEntry 1 }
udldInfoPortConfig OBJECT-TYPE
SYNTAX INTEGER
{ enabled(1)
, disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Config field of the port in UDLD port info table.
Shows the administative state of the current port."
::= { udldInfoPortEntry 2 }
udldInfoPortMode OBJECT-TYPE
SYNTAX INTEGER
{ aggresive(1)
, normal(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mode field of the port in UDLD info port table.
Shows the udld administrative mode for the current port."
::= { udldInfoPortEntry 3 }
udldInfoPortLink OBJECT-TYPE
SYNTAX INTEGER
{ up(1)
, down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link field of the port in UDLD info port table.
Shows the state of the link associated with the port."
::= { udldInfoPortEntry 4 }
udldInfoPortOperationalStatus OBJECT-TYPE
SYNTAX INTEGER
{ init(1)
, inactive(2)
, linkup(3)
, advertisement(4)
, detection(5)
, extDetection(6)
, shutdown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OperationalStatus field of the port in UDLD info port table.
Contains the udld operational state for the current port."
::= { udldInfoPortEntry 5 }
udldInfoPortBidirectionalStatus OBJECT-TYPE
SYNTAX INTEGER
{ unknown(1)
, unidirectional(2)
, bidirectional(3)
, loop(4)
, neighborMismatch(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BidirectionalStatus field of the port in UDLD info port table.
Contains the udld bidirectional state for the current port."
::= { udldInfoPortEntry 6 }
udldInfoPortInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Interval field of the port in UDLD info port table.
The duration, measured in seconds, of the interval during which
UDLD probes are sent, after the linkup or detection phases.
Its time unit is 1 second."
::= { udldInfoPortEntry 7 }
udldInfoPortTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Timeout field of the port in UDLD info port table.
Length of the detection phase, measured in seconds."
::= { udldInfoPortEntry 8}
udldInfoPortNeighborCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Neighbor field of the port in UDLD info port table.
Contains the number of udld neighbors for the current port."
::= { udldInfoPortEntry 9 }
udldInfoPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alias of the row in UDLD port configuration table."
::= { udldInfoPortEntry 10 }
udldInfoNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF UdldInfoNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of UDLD port neighbor info."
::= { udldInfo 2 }
udldInfoNeighborEntry OBJECT-TYPE
SYNTAX UdldInfoNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row inside UDLD port info table."
INDEX { udldInfoNeighborLocalPortIndex, udldInfoNeighborIndex }
::= { udldInfoNeighborTable 1 }
UdldInfoNeighborEntry ::= SEQUENCE
{ udldInfoNeighborLocalPortIndex PortNumber
, udldInfoNeighborIndex Integer32
, udldInfoNeighborExpiration INTEGER
, udldInfoNeighborDeviceName DisplayString
, udldInfoNeighborDeviceID DisplayString
, udldInfoNeighborPortID DisplayString
, udldInfoNeighborLocalPortAlias DisplayString
}
udldInfoNeighborLocalPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port for which neighbor information
will be returned."
::= { udldInfoNeighborEntry 1 }
udldInfoNeighborIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the target neighbor among the port neighbors."
::= { udldInfoNeighborEntry 2 }
udldInfoNeighborExpiration OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hold time for the given neighbor."
::= { udldInfoNeighborEntry 3 }
udldInfoNeighborDeviceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device name reported by neigbor."
::= { udldInfoNeighborEntry 4 }
udldInfoNeighborDeviceID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device ID reported by neigbor."
::= { udldInfoNeighborEntry 5 }
udldInfoNeighborPortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port ID reported by neigbor."
::= { udldInfoNeighborEntry 6 }
udldInfoNeighborLocalPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alias of the port for which neighbor information
will be returned."
::= { udldInfoNeighborEntry 7 }
--
-- } End of UDLD Info
--
-- FDB
fdbCurCfgStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbCurCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB static entries."
::= { fdb 2 }
fdbCurCfgStaticEntry OBJECT-TYPE
SYNTAX FdbCurCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the fdb table."
INDEX { fdbCurCfgEntryIndex }
::= { fdbCurCfgStaticTable 1 }
FdbCurCfgStaticEntry ::= SEQUENCE {
fdbCurCfgEntryIndex Integer32,
fdbCurCfgVlan Integer32,
fdbCurCfgPortIndex PortNumber,
fdbCurCfgMac PhysAddress
,fdbCurCfgTrunk Integer32
,fdbCurCfgAdminkey Integer32
,fdbCurCfgPortAlias DisplayString
}
fdbCurCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fdb entry index"
::= { fdbCurCfgStaticEntry 1 }
fdbCurCfgVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Add vlan for fdb entry index"
::= { fdbCurCfgStaticEntry 2 }
fdbCurCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address port number."
::= { fdbCurCfgStaticEntry 3 }
fdbCurCfgMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Add a fdb entry."
::= { fdbCurCfgStaticEntry 4 }
fdbCurCfgTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address trunk number."
::= { fdbCurCfgStaticEntry 5 }
fdbCurCfgAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address LACP trunk adminkey."
::= { fdbCurCfgStaticEntry 6 }
fdbCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address port alias."
::= { fdbCurCfgStaticEntry 7 }
fdbNewCfgStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbNewCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB static entries."
::= { fdb 3 }
fdbNewCfgStaticEntry OBJECT-TYPE
SYNTAX FdbNewCfgStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the fdb table."
INDEX { fdbNewCfgEntryIndex }
::= { fdbNewCfgStaticTable 1 }
FdbNewCfgStaticEntry ::= SEQUENCE {
fdbNewCfgEntryIndex Integer32,
fdbNewCfgAddVlan Integer32,
fdbNewCfgAddPortIndex PortNumber,
fdbNewCfgAddTrunk Integer32,
fdbNewCfgAddAdminkey Integer32,
fdbNewCfgAddMac PhysAddress,
fdbNewCfgDelStaticEntry INTEGER
,fdbNewCfgAddPortAlias DisplayString
}
fdbNewCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fdb entry index"
::= { fdbNewCfgStaticEntry 1 }
fdbNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add vlan for fdb entry index"
::= { fdbNewCfgStaticEntry 2 }
fdbNewCfgAddPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address port number."
::= { fdbNewCfgStaticEntry 3 }
fdbNewCfgAddMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add a fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05"
::= { fdbNewCfgStaticEntry 4 }
fdbNewCfgDelStaticEntry OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { fdbNewCfgStaticEntry 5 }
fdbNewCfgAddTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address trunk number."
::= { fdbNewCfgStaticEntry 6 }
fdbNewCfgAddAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address LACP trunk adminkey."
::= { fdbNewCfgStaticEntry 7 }
fdbNewCfgAddPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address port alias."
::= { fdbNewCfgStaticEntry 8 }
-- Multicast FDB
mcastFdbCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF McastFdbCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of multicast FDB static entries."
::= { fdb 8 }
mcastFdbCurCfgEntry OBJECT-TYPE
SYNTAX McastFdbCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the multicast fdb table."
INDEX { mcastFdbCurCfgEntryIndex }
::= { mcastFdbCurCfgTable 1 }
McastFdbCurCfgEntry ::= SEQUENCE {
mcastFdbCurCfgEntryIndex Integer32,
mcastFdbCurCfgVlan Integer32,
mcastFdbCurCfgPorts PortNumber,
mcastFdbCurCfgMac MacAddress
}
mcastFdbCurCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast fdb entry index"
::= { mcastFdbCurCfgEntry 1 }
mcastFdbCurCfgVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Add vlan for multicast fdb entry index"
::= { mcastFdbCurCfgEntry 2 }
mcastFdbCurCfgPorts OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address."
::= { mcastFdbCurCfgEntry 3 }
mcastFdbCurCfgMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Add a multicast fdb entry."
::= { mcastFdbCurCfgEntry 4 }
mcastFdbNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF McastFdbNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of multicast FDB static entries."
::= { fdb 9 }
mcastFdbNewCfgEntry OBJECT-TYPE
SYNTAX McastFdbNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the multicast fdb table."
INDEX { mcastFdbNewCfgEntryIndex }
::= { mcastFdbNewCfgTable 1 }
McastFdbNewCfgEntry ::= SEQUENCE {
mcastFdbNewCfgEntryIndex Integer32,
mcastFdbNewCfgAddVlan Integer32,
mcastFdbNewCfgPorts OCTET STRING,
mcastFdbNewCfgAddPortIndex PortNumber,
mcastFdbNewCfgRemPortIndex PortNumber,
mcastFdbNewCfgAddMac MacAddress,
mcastFdbNewCfgDelStaticEntry INTEGER
,mcastFdbNewCfgAddPortAlias DisplayString,
mcastFdbNewCfgRemPortAlias DisplayString
}
mcastFdbNewCfgEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast fdb entry index"
::= { mcastFdbNewCfgEntry 1 }
mcastFdbNewCfgAddVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add vlan for multicast fdb entry index"
::= { mcastFdbNewCfgEntry 2 }
mcastFdbNewCfgPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address."
::= { mcastFdbNewCfgEntry 3 }
mcastFdbNewCfgAddPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The multicast MAC address port number to be added. A '0'
value is returned when read."
::= { mcastFdbNewCfgEntry 4 }
mcastFdbNewCfgRemPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The multicast MAC address port number to be removed. A '0'
value is returned when read."
::= { mcastFdbNewCfgEntry 5 }
mcastFdbNewCfgAddMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Add a multicast fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05"
::= { mcastFdbNewCfgEntry 6 }
mcastFdbNewCfgDelStaticEntry OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { mcastFdbNewCfgEntry 7 }
mcastFdbNewCfgAddPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The multicast MAC address port alias to be added. A '0'
value is returned when read."
::= { mcastFdbNewCfgEntry 8 }
mcastFdbNewCfgRemPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The multicast MAC address port alias to be removed. A '0'
value is returned when read."
::= { mcastFdbNewCfgEntry 9 }
--dot1x
dot1xCurStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(0),
disable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Dot1x status "
::= { dot1x 1 }
dot1xNewStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(0),
disable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Dot1x status "
::= { dot1x 2 }
dot1xCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xCurCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021x configuration in the Current_config."
::= { dot1x 3 }
dot1xNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xNewCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021x configuration in the new_config."
::= { dot1x 4 }
dot1xCurCfgPortEntry OBJECT-TYPE
SYNTAX Dot1xCurCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021x Port Config"
INDEX { dot1xCurCfgPortIndex }
::= { dot1xCurCfgPortTable 1 }
Dot1xCurCfgPortEntry ::= SEQUENCE {
dot1xCurCfgPortIndex PortNumber,
dot1xCurCfgPortMode INTEGER,
dot1xCurCfgPortQtPeriod INTEGER,
dot1xCurCfgPortTxPeriod INTEGER,
dot1xCurCfgPortSupTmout INTEGER,
dot1xCurCfgPortSrvTmout INTEGER,
dot1xCurCfgPortMaxRq INTEGER,
dot1xCurCfgPortRaPeriod INTEGER,
dot1xCurCfgPortReAuth INTEGER
,
dot1xCurCfgPortVlanAssign INTEGER
,dot1xCurCfgPortAlias DisplayString
}
dot1xCurCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port number for which the table is related."
::= { dot1xCurCfgPortEntry 1}
dot1xCurCfgPortMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Port authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)
"
::= { dot1xCurCfgPortEntry 2 }
dot1xCurCfgPortQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Quiet period (0-65535) "
::= { dot1xCurCfgPortEntry 3 }
dot1xCurCfgPortTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Tx Period "
::= { dot1xCurCfgPortEntry 4 }
dot1xCurCfgPortSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Supplicant timeout (1..65535) "
::= { dot1xCurCfgPortEntry 5 }
dot1xCurCfgPortSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Server timeout (1..65535) "
::= { dot1xCurCfgPortEntry 6 }
dot1xCurCfgPortMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Maximum numer of requests (1..10) "
::= { dot1xCurCfgPortEntry 7 }
dot1xCurCfgPortRaPeriod OBJECT-TYPE
SYNTAX INTEGER (0..604800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Reautentication period (0..604800) "
::= { dot1xCurCfgPortEntry 8 }
dot1xCurCfgPortReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ReAuthentication state
off(0),
on(1)
"
::= { dot1xCurCfgPortEntry 9 }
dot1xCurCfgPortVlanAssign OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Vlan assignment state
off(0),
on(1)
"
::= { dot1xCurCfgPortEntry 10 }
dot1xCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port alias for which the table is related."
::= { dot1xCurCfgPortEntry 11}
dot1xNewCfgPortEntry OBJECT-TYPE
SYNTAX Dot1xNewCfgPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021x Port Config"
INDEX { dot1xNewCfgPortIndex }
::= { dot1xNewCfgPortTable 1 }
Dot1xNewCfgPortEntry ::= SEQUENCE {
dot1xNewCfgPortIndex PortNumber,
dot1xNewCfgPortMode INTEGER,
dot1xNewCfgPortQtPeriod INTEGER,
dot1xNewCfgPortTxPeriod INTEGER,
dot1xNewCfgPortSupTmout INTEGER,
dot1xNewCfgPortSrvTmout INTEGER,
dot1xNewCfgPortMaxRq INTEGER,
dot1xNewCfgPortRaPeriod INTEGER,
dot1xNewCfgPortReAuth INTEGER ,
dot1xNewCfgPortDefault INTEGER ,
dot1xNewCfgPortApplyGlobal INTEGER
,
dot1xNewCfgPortVlanAssign INTEGER
,dot1xNewCfgPortAlias DisplayString
}
dot1xNewCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port number for which the table is related."
::= { dot1xNewCfgPortEntry 1}
dot1xNewCfgPortMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Port authentication mode
forceUnauth(0),
auto(1),
forceAuth(2) "
::= { dot1xNewCfgPortEntry 2 }
dot1xNewCfgPortQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Quiet period (0..65535) "
::= { dot1xNewCfgPortEntry 3 }
dot1xNewCfgPortTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Tx Period (1..65535) "
::= { dot1xNewCfgPortEntry 4 }
dot1xNewCfgPortSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Supplicant Timeout (1..65535) "
::= { dot1xNewCfgPortEntry 5 }
dot1xNewCfgPortSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Server Timeout (1..65535) "
::= { dot1xNewCfgPortEntry 6 }
dot1xNewCfgPortMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Maximum number of requests (1..10) "
::= { dot1xNewCfgPortEntry 7 }
dot1xNewCfgPortRaPeriod OBJECT-TYPE
SYNTAX INTEGER (1..604800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication period (1..604800) "
::= { dot1xNewCfgPortEntry 8 }
dot1xNewCfgPortReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication state
off(0),
on(1) "
::= { dot1xNewCfgPortEntry 9 }
dot1xNewCfgPortDefault OBJECT-TYPE
SYNTAX INTEGER {
other(0),
apply(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Port default settings "
::= { dot1xNewCfgPortEntry 10 }
dot1xNewCfgPortApplyGlobal OBJECT-TYPE
SYNTAX INTEGER {
other(0),
apply(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Apply Global config "
::= { dot1xNewCfgPortEntry 11 }
dot1xNewCfgPortVlanAssign OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable the assignment of vlan from radius server when the
port is successfully autheticated.
Vlan assignment state
off(0),
on(1) "
::= { dot1xNewCfgPortEntry 12 }
dot1xNewCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port alias for which the table is related."
::= { dot1xNewCfgPortEntry 13}
dot1xCurCfgGuestVlanNumber OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" 8021.x Guest VLAN number"
::= { dot1xCurCfgGuestVlan 1 }
dot1xCurCfgGuestVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" 8021.x Guest VLAN status
enabled(1),
disabled(2)"
::= { dot1xCurCfgGuestVlan 2 }
dot1xCurCfgGlobalMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Autehtication Mode
forceUnauth(0),
auto(1),
forceAuth(2) "
::= { dot1xCurCfgGlobalTable 3 }
dot1xCurCfgGlobalQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Quiet period (0..65535) "
::= { dot1xCurCfgGlobalTable 4 }
dot1xCurCfgGlobalTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Tx period (1..65535) "
::= { dot1xCurCfgGlobalTable 5 }
dot1xCurCfgGlobalSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Supplicant timeout (1..65535) "
::= { dot1xCurCfgGlobalTable 6 }
dot1xCurCfgGlobalSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Server timeout (1..65535) "
::= { dot1xCurCfgGlobalTable 7 }
dot1xCurCfgGlobalMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Maximum number of requests (1..10) "
::= { dot1xCurCfgGlobalTable 8 }
dot1xCurCfgGlobalRaPeriod OBJECT-TYPE
SYNTAX INTEGER (0..604800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Reauthentication period (0..604800) "
::= { dot1xCurCfgGlobalTable 9 }
dot1xCurCfgGlobalReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { dot1xCurCfgGlobalTable 10 }
dot1xCurCfgGlobalVlanAssign OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan assignment status"
::= { dot1xCurCfgGlobalTable 12 }
dot1xNewCfgGuestVlanNumber OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 8021.x Guest VLAN number "
::= { dot1xNewCfgGuestVlan 1 }
dot1xNewCfgGuestVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" 8021.x Guest VLAN status
enabled(1),
disabled(2)"
::= { dot1xNewCfgGuestVlan 2 }
dot1xNewCfgGlobalMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Authentication Mode "
::= { dot1xNewCfgGlobalTable 3 }
dot1xNewCfgGlobalQtPeriod OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Quiet Period (0..65535) "
::= { dot1xNewCfgGlobalTable 4 }
dot1xNewCfgGlobalTxPeriod OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Tx Period (1..65535) "
::= { dot1xNewCfgGlobalTable 5 }
dot1xNewCfgGlobalSupTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Supplicand timeout (1..65535) "
::= { dot1xNewCfgGlobalTable 6 }
dot1xNewCfgGlobalSrvTmout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Server timeout (1..65535) "
::= { dot1xNewCfgGlobalTable 7 }
dot1xNewCfgGlobalMaxRq OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Maximum number of requests (1..10) "
::= { dot1xNewCfgGlobalTable 8 }
dot1xNewCfgGlobalRaPeriod OBJECT-TYPE
SYNTAX INTEGER (1..604800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication period (1..604800) "
::= { dot1xNewCfgGlobalTable 9 }
dot1xNewCfgGlobalReAuth OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Reauthentication status "
::= { dot1xNewCfgGlobalTable 10 }
dot1xNewCfgGlobalDefault OBJECT-TYPE
SYNTAX INTEGER {
other(0),
apply(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Restore default 802.1x configuration "
::= { dot1xNewCfgGlobalTable 11 }
dot1xNewCfgGlobalVlanAssign OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/Disable the assignment of vlan from radius server when the
port is successfully autheticated."
::= { dot1xNewCfgGlobalTable 12 }
dot1xInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of 8021x configuration in the Current_config."
::= { dot1xInfo 1 }
dot1xInfoPortEntry OBJECT-TYPE
SYNTAX Dot1xInfoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about 8021x Port Config"
INDEX { dot1xInfoPortIndex }
::= { dot1xInfoPortTable 1 }
Dot1xInfoPortEntry ::= SEQUENCE {
dot1xInfoPortIndex PortNumber,
dot1xInfoPortAuthMode INTEGER,
dot1xInfoPortAuthStatus INTEGER,
dot1xInfoPortAuthPAEState INTEGER,
dot1xInfoPortBackAuthState INTEGER
,
dot1xInfoPortAssignedVlan INTEGER
,dot1xInfoPortAlias DisplayString
}
dot1xInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port number for which the table is related."
::= { dot1xInfoPortEntry 1}
dot1xInfoPortAuthMode OBJECT-TYPE
SYNTAX INTEGER {
forceUnauth(0),
auto(1),
forceAuth(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Authentication mode "
::= { dot1xInfoPortEntry 2 }
dot1xInfoPortAuthStatus OBJECT-TYPE
SYNTAX INTEGER {
authorized(0),
unauthorized(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Authentication status "
::= { dot1xInfoPortEntry 3 }
dot1xInfoPortAuthPAEState OBJECT-TYPE
SYNTAX INTEGER {
initialize(0),
disconnected(1),
connecting(2),
authenticating(3),
authenticated(4),
aborting(5),
held(6),
forceauth(7),
forceunauth(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Authenticator PAE State "
::= { dot1xInfoPortEntry 5 }
dot1xInfoPortBackAuthState OBJECT-TYPE
SYNTAX INTEGER {
request(0),
response(1),
success(2),
fail(3),
timeout(4),
idle(5),
initialize(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Backend authenticator PAE state "
::= { dot1xInfoPortEntry 6 }
dot1xInfoPortAssignedVlan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan assigned from radius server.Value of
0 indicates , no vlan assigned via Radius"
::= { dot1xInfoPortEntry 7 }
dot1xInfoPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8021x Port alias for which the table is related."
::= { dot1xInfoPortEntry 8}
dot1xSystemCapability OBJECT-TYPE
SYNTAX INTEGER {
authenticator(0),
supplicant(1),
authenticatorAndSupplicant(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" System capability "
::= { dot1xSystemInfo 1 }
dot1xSystemStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" System status "
::= { dot1xSystemInfo 2 }
dot1xSystemProtoVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Protocol version "
::= { dot1xSystemInfo 3 }
-- Trunk Group Information
trunkGroupInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of trunk group information."
::= { trunkGroupInfo 1 }
trunkGroupInfoTableEntry OBJECT-TYPE
SYNTAX TrunkGroupInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in trunk group information table."
INDEX { trunkGroupInfoIndex }
::= { trunkGroupInfoTable 1 }
TrunkGroupInfoTableEntry ::= SEQUENCE {
trunkGroupInfoIndex Integer32,
trunkGroupInfoState INTEGER,
trunkGroupInfoProtocol INTEGER,
trunkGroupInfoPorts OCTET STRING
}
trunkGroupInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { trunkGroupInfoTableEntry 1 }
trunkGroupInfoState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk group state."
::= { trunkGroupInfoTableEntry 2 }
trunkGroupInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group"
::= { trunkGroupInfoTableEntry 3 }
trunkGroupInfoProtocol OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk group protocol
Static - static trunk group
Lacp - dynamic trunk group"
::= { trunkGroupInfoTableEntry 4 }
trunkGroupInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Trunk Group Info."
::= {trunkGroupInfo 2 }
trunkGroupInfoPortTableEntry OBJECT-TYPE
SYNTAX TrunkGroupInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Trunk Info table."
INDEX { trunkGroupInfoPortTrunkId, trunkGroupInfoPortPortId }
::= { trunkGroupInfoPortTable 1 }
TrunkGroupInfoPortTableEntry ::= SEQUENCE {
trunkGroupInfoPortTrunkId Integer32,
trunkGroupInfoPortPortId PortNumber,
trunkGroupInfoPortStatus INTEGER
,trunkGroupInfoPortAlias DisplayString
}
trunkGroupInfoPortTrunkId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trunk identifier."
::= { trunkGroupInfoPortTableEntry 1 }
trunkGroupInfoPortPortId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier."
::= { trunkGroupInfoPortTableEntry 2 }
trunkGroupInfoPortStatus OBJECT-TYPE
SYNTAX INTEGER{
down(0),
blocking(1),
forwarding(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Status."
::= { trunkGroupInfoPortTableEntry 3 }
trunkGroupInfoPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port alaias."
::= { trunkGroupInfoPortTableEntry 4 }
-- LACP Statistics
lacpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP Stats."
::= {lacpStats 1}
lacpStatsTableEntry OBJECT-TYPE
SYNTAX LacpStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Lacp status info."
INDEX { lacpStatsIndex }
::= { lacpStatsTable 1 }
LacpStatsTableEntry ::= SEQUENCE {
lacpStatsIndex PortNumber,
lacpdusRx Integer32,
markerpdusRx Integer32,
markerresponsepdusRx Integer32,
unknownRx Integer32,
illegalRx Integer32,
lacpdusTx Integer32,
markerpdusTx Integer32,
markerresponsepdusTx Integer32
,lacpClearStats INTEGER
,lacpStatsPortAlias DisplayString
}
lacpStatsIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index"
::= {lacpStatsTableEntry 1}
lacpdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid LACPDUs received"
::= {lacpStatsTableEntry 2}
markerpdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Marker PDUs received"
::= {lacpStatsTableEntry 3}
markerresponsepdusRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Valid Marker Rsp PDUs received"
::= {lacpStatsTableEntry 4}
unknownRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unknown version/TLV type"
::= {lacpStatsTableEntry 5}
illegalRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Illegal subtype received"
::= {lacpStatsTableEntry 6}
lacpdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACPDUs transmitted"
::= {lacpStatsTableEntry 7}
markerpdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Market PDUs transmitted"
::= {lacpStatsTableEntry 8}
markerresponsepdusTx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Marker Rsp PDUs transmitted "
::= {lacpStatsTableEntry 9}
lacpStatsPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Alias."
::= {lacpStatsTableEntry 11}
lacpClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the LACP statistics."
::= { lacpStatsTableEntry 10 }
-- FDB Statistics
fdbStatsCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of entries in the Forwarding Database."
::= { fdbStats 3 }
fdbStatsHiwat OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Highest number of entries recorded at any given time in the
Forwarding Database."
::= { fdbStats 4 }
fdbStatsClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear FDB statistics"
::= { fdbStats 11 }
-- STP Statistics
stgStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StgStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port statistics."
::= { stpStats 1 }
stgStatsPortTableEntry OBJECT-TYPE
SYNTAX StgStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about port of a particular Spanning Tree Group."
INDEX { stgStatsStpIndex, stgStatsPortIndex }
::= { stgStatsPortTable 1 }
StgStatsPortTableEntry ::= SEQUENCE {
stgStatsStpIndex Integer32,
stgStatsPortIndex PortNumber,
stgStatsPortRcvBpdus Counter32,
stgStatsPortRcvTcnBpdus Counter32,
stgStatsPortLastTcnRcv DisplayString,
stgStatsPortXmtBpdus Counter32,
stgStatsPortXmtTcnBpdus Counter32,
stgStatsPortLastTcnXmt DisplayString,
stgStatsPortDropBpdus Counter32
,stgStatsPortAlias DisplayString
}
stgStatsStpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 1 }
stgStatsPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 2 }
stgStatsPortRcvBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total BPDU's received on this port."
::= { stgStatsPortTableEntry 3 }
stgStatsPortRcvTcnBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's received on this port."
::= { stgStatsPortTableEntry 4 }
stgStatsPortLastTcnRcv OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of last TCN BPDU's received on this port."
::= { stgStatsPortTableEntry 5 }
stgStatsPortXmtBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total BPDU's transmitted on this port."
::= { stgStatsPortTableEntry 6 }
stgStatsPortXmtTcnBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's trasmitted from the port."
::= { stgStatsPortTableEntry 7 }
stgStatsPortLastTcnXmt OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of last TCN BPDU's transmitted on this port."
::= { stgStatsPortTableEntry 8 }
stgStatsPortDropBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of total BPDU's dropped on this port."
::= { stgStatsPortTableEntry 9 }
stgStatsPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias of a particular Spanning Tree Group."
::= { stgStatsPortTableEntry 10 }
cistStatsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CistStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Common and Internal Spanning Tree port statistics."
::= { cistStats 1 }
cistStatsPortTableEntry OBJECT-TYPE
SYNTAX CistStatsPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about port of Common and Internal Spanning Tree."
INDEX {cistStatsPortIndex }
::= { cistStatsPortTable 1 }
CistStatsPortTableEntry ::= SEQUENCE {
cistStatsPortIndex PortNumber,
cistStatsPortRcvBpdus Counter32,
cistStatsPortRcvTcnBpdus Counter32,
cistStatsPortLastTcnRcv DisplayString,
cistStatsPortXmtBpdus Counter32,
cistStatsPortXmtTcnBpdus Counter32,
cistStatsPortLastTcnXmt DisplayString,
cistStatsPortDropBpdus Counter32
}
cistStatsPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of CIST."
::= { cistStatsPortTableEntry 1 }
cistStatsPortRcvBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BPDU's received on this port."
::= { cistStatsPortTableEntry 2 }
cistStatsPortRcvTcnBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's received on this port."
::= { cistStatsPortTableEntry 3 }
cistStatsPortLastTcnRcv OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of Last TCN BPDU's received on this port."
::= { cistStatsPortTableEntry 4 }
cistStatsPortXmtBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BPDU's transmitted from the port."
::= { cistStatsPortTableEntry 5 }
cistStatsPortXmtTcnBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TCN BPDU's transmitted from the port."
::= { cistStatsPortTableEntry 6 }
cistStatsPortLastTcnXmt OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of Last TCN BPDU's transmitted from this port."
::= { cistStatsPortTableEntry 7 }
cistStatsPortDropBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BPDU's dropped on the port."
::= { cistStatsPortTableEntry 8 }
fdbClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the entire master FDB."
::= { fdbInfo 1 }
-- FDB table
fdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB entries."
::= { fdbInfo 2 }
fdbEntry OBJECT-TYPE
SYNTAX FdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the FDB table"
INDEX { fdbMacAddr }
::= { fdbTable 1 }
FdbEntry ::= SEQUENCE {
fdbMacAddr MacAddress,
fdbVlan Integer32,
fdbSrcPortIndex PortNumber,
fdbSrcTrunk Integer32,
fdbState INTEGER
,fdbStatus Integer32
,fdbSrcPortAlias DisplayString
}
fdbMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the FDB entry."
::= { fdbEntry 1 }
fdbVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry."
::= { fdbEntry 2 }
fdbSrcPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address."
::= { fdbEntry 3 }
fdbState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
forward(2),
trunk(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
group"
::= { fdbEntry 4 }
fdbSrcTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk."
::= { fdbEntry 7 }
fdbStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'1' if it is permanent
'0' if it is not permanent"
::= { fdbEntry 8 }
fdbSrcPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port alias of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address."
::= { fdbEntry 9 }
-- Multicast FDB table
mcastFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF McastFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static multicast FDB entries."
::= { fdbInfo 3 }
mcastFdbEntry OBJECT-TYPE
SYNTAX McastFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static multicast FDB table"
INDEX { mcastFdbEntryIndex }
::= { mcastFdbTable 1 }
McastFdbEntry ::= SEQUENCE {
mcastFdbEntryIndex Integer32,
mcastFdbMacAddr MacAddress,
mcastFdbVlan Integer32,
mcastFdbSrcPorts PortNumber
}
mcastFdbEntryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The static multicast fdb entry index"
::= { mcastFdbEntry 1 }
mcastFdbMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The static multicast MAC address for the FDB entry."
::= { mcastFdbEntry 2 }
mcastFdbVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry."
::= { mcastFdbEntry 3 }
mcastFdbSrcPorts OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast MAC address port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the multicast MAC address.
0 - The represented port does not belong to the multicast MAC address."
::= { mcastFdbEntry 4 }
-- STP Information
stpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group information."
::= { stpInfo 1 }
stpInfoTableEntry OBJECT-TYPE
SYNTAX StpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Spanning Tree Group."
INDEX { stpInfoIndex }
::= { stpInfoTable 1 }
StpInfoTableEntry ::= SEQUENCE {
stpInfoIndex Integer32,
stpInfoTimeSinceTopChange TimeTicks,
stpInfoTopChanges Counter32,
stpInfoDesignatedRoot BridgeId,
stpInfoRootCost Integer32,
stpInfoRootPortIndex PortNumber,
stpInfoMaxAge Integer32,
stpInfoHelloTime Integer32,
stpInfoForwardDelay Integer32,
stpInfoHoldTime Integer32,
stpInfoPreRoot BridgeId,
stpInfoPreRootPort PortNumber,
stpInfoRootReplaceTime DisplayString
,stpInfoRootPortAlias DisplayString
}
stpInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB."
::= { stpInfoTableEntry 1 }
stpInfoTimeSinceTopChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity."
::= { stpInfoTableEntry 2 }
stpInfoTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of topology changes detected by this bridge since
the management entity was last reset or initialized."
::= { stpInfoTableEntry 3 }
stpInfoDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs originated by this node."
::= { stpInfoTableEntry 4 }
stpInfoRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the root as seen from this bridge."
::= { stpInfoTableEntry 5 }
stpInfoRootPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port which offers the lowest cost path from
this bridge to the root bridge."
::= { stpInfoTableEntry 6 }
stpInfoMaxAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using."
::= { stpInfoTableEntry 7 }
stpInfoHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual value that this bridge is currently using."
::= { stpInfoTableEntry 8 }
stpInfoForwardDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the Listening and Learning states, which precede
the Forwarding state. This value is also used, when a topology
change has been detected and is underway, to age all dynamic entries
in the Forwarding Database."
::= { stpInfoTableEntry 9 }
stpInfoHoldTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second."
::= { stpInfoTableEntry 10 }
stpInfoPreRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is previous root bridge before current root bridge selected."
::= { stpInfoTableEntry 11 }
stpInfoPreRootPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is previous root port before current root port selected."
::= { stpInfoTableEntry 12 }
stpInfoRootReplaceTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Time of new root bridge replacing old root bridge."
::= { stpInfoTableEntry 13 }
stpInfoRootPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias of the port which offers the lowest cost path from
this bridge to the root bridge."
::= { stpInfoTableEntry 14 }
stpInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Spanning Tree Group port information."
::= { stpInfo 2 }
stpInfoPortTableEntry OBJECT-TYPE
SYNTAX StpInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about port configuration for a particular Spanning Tree
Group."
INDEX { stpInfoPortStpIndex, stpInfoPortIndex }
::= { stpInfoPortTable 1 }
StpInfoPortTableEntry ::= SEQUENCE {
stpInfoPortStpIndex Integer32,
stpInfoPortIndex PortNumber,
stpInfoPortState INTEGER,
stpInfoPortDesignatedRoot BridgeId,
stpInfoPortDesignatedCost Integer32,
stpInfoPortDesignatedBridge BridgeId,
stpInfoPortDesignatedPort OCTET STRING,
stpInfoPortForwardTransitions Counter32,
stpInfoPortRole INTEGER,
stpInfoPortLinkType INTEGER,
stpInfoPortEdge INTEGER,
stpInfoPortExtGuard INTEGER,
stpInfoPortPathCost Integer32,
stpInfoPortPriority Integer32
,stpInfoPortAlias DisplayString
}
stpInfoPortStpIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 1 }
stpInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 2 }
stpInfoPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
discarding(7),
broken(6),
na(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it will place that port into the broken(6) state.
For ports which are disabled, this object will have a value of
disabled(1). If port is not controlled by STP, this object will have
a value of na (8)."
::= { stpInfoPortTableEntry 3 }
stpInfoPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached."
::= { stpInfoPortTableEntry 4 }
stpInfoPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs."
::= { stpInfoPortTableEntry 5 }
stpInfoPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment."
::= { stpInfoPortTableEntry 6 }
stpInfoPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port on the Designated Bridge for this
port's segment."
::= { stpInfoPortTableEntry 7 }
stpInfoPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned from the Learning
state to the Forwarding state."
::= { stpInfoPortTableEntry 8 }
stpInfoPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the port."
::= { stpInfoPortTableEntry 9 }
stpInfoPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
master(6),
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port role. Returns unknown(7) when MSTP/RSTP is not enabled,
otherwise returns appropriate port role."
::= { stpInfoPortTableEntry 10 }
stpInfoPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
shared(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that this port is being treated as
having a shared media connection."
::= { stpInfoPortTableEntry 11 }
stpInfoPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port."
::= { stpInfoPortTableEntry 12 }
stpInfoPortExtGuard OBJECT-TYPE
SYNTAX INTEGER {
loop-inc(1),
root-inc(2),
normal(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current STP guard state. Not include BPDU Guard."
::= { stpInfoPortTableEntry 13 }
stpInfoPortPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { stpInfoPortTableEntry 14 }
stpInfoPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias of a particular Spanning Tree Group."
::= { stpInfoPortTableEntry 15 }
-- LACP information
lacpInfoAggrTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoAggrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP aggregator information."
::= { lacpInfo 1 }
lacpInfoAggrTableEntry OBJECT-TYPE
SYNTAX LacpInfoAggrTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a LACP aggregator."
INDEX { lacpInfoAggrIndex }
::= { lacpInfoAggrTable 1 }
LacpInfoAggrTableEntry ::= SEQUENCE {
lacpInfoAggrIndex PortNumber,
lacpInfoAggrId Integer32,
lacpInfoAggrMac DisplayString,
lacpInfoAggrActSysPrio Integer32,
lacpInfoAggrActSysId DisplayString,
lacpInfoAggrIndivState INTEGER,
lacpInfoAggrActAdminKey Integer32,
lacpInfoAggrActOperKey Integer32,
lacpInfoAggrPartSysPrio Integer32,
lacpInfoAggrPartSysId DisplayString,
lacpInfoAggrPartOperKey Integer32,
lacpInfoAggrReadyState INTEGER,
lacpInfoAggrNumPorts Integer32
,lacpInfoAggrMinLinks Integer32
}
lacpInfoAggrIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aggregator identifier."
::= { lacpInfoAggrTableEntry 1 }
lacpInfoAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator ID"
::= { lacpInfoAggrTableEntry 2 }
lacpInfoAggrMac OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator MAC address"
::= { lacpInfoAggrTableEntry 3 }
lacpInfoAggrActSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator actor system priority"
::= { lacpInfoAggrTableEntry 4 }
lacpInfoAggrActSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator actor system ID"
::= { lacpInfoAggrTableEntry 5 }
lacpInfoAggrIndivState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator individual state"
::= { lacpInfoAggrTableEntry 6 }
lacpInfoAggrActAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator actor admin key"
::= { lacpInfoAggrTableEntry 7 }
lacpInfoAggrActOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator actor oper key"
::= { lacpInfoAggrTableEntry 8 }
lacpInfoAggrPartSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator partner system priority"
::= { lacpInfoAggrTableEntry 9 }
lacpInfoAggrPartSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator partner system ID"
::= { lacpInfoAggrTableEntry 10 }
lacpInfoAggrPartOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator partner oper key"
::= { lacpInfoAggrTableEntry 11 }
lacpInfoAggrReadyState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP aggregator ready state"
::= { lacpInfoAggrTableEntry 12 }
lacpInfoAggrNumPorts OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ports in aggregator"
::= { lacpInfoAggrTableEntry 13 }
lacpInfoAggrMinLinks OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Min Links of ports in aggregator"
::= { lacpInfoAggrTableEntry 15 }
lacpInfoPort OBJECT IDENTIFIER ::= { lacpInfo 2 }
lacpInfoPortGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortGeneralTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port general information."
::= { lacpInfoPort 1 }
lacpInfoPortGeneralTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortGeneralTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"General information about a LACP port."
INDEX { lacpInfoPortGeneralIndex }
::= { lacpInfoPortGeneralTable 1 }
LacpInfoPortGeneralTableEntry ::= SEQUENCE {
lacpInfoPortGeneralIndex PortNumber,
lacpInfoPortLacpEna INTEGER,
lacpInfoPortAdminEna INTEGER,
lacpInfoPortActSysId DisplayString,
lacpInfoPortActSysPrio Integer32,
lacpInfoPortActAdminKey Integer32,
lacpInfoPortActOperKey Integer32,
lacpInfoPortActPortNum Integer32,
lacpInfoPortActPortPrio Integer32,
lacpInfoPortIndivState INTEGER,
lacpInfoSelAggrId Integer32,
lacpInfoAttAggrId Integer32,
lacpInfoPortReadyN INTEGER,
lacpInfoPortNtt INTEGER,
lacpInfoPortSelected INTEGER,
lacpInfoPortMoved INTEGER,
lacpInfoCollDetState INTEGER,
lacpInfoPortRxState DisplayString,
lacpInfoPortMuxState DisplayString,
lacpInfoPortPerState DisplayString,
lacpInfoPortPerTraTimer Integer32,
lacpInfoPortCurWhileTimer Integer32,
lacpInfoPortOperState INTEGER
,lacpInfoPortGeneralPortAlias DisplayString
,lacpInfoPortActPortAlias DisplayString
}
lacpInfoPortGeneralIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortGeneralTableEntry 1 }
lacpInfoPortLacpEna OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP enabled on port"
::= { lacpInfoPortGeneralTableEntry 2 }
lacpInfoPortAdminEna OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port admin enabled"
::= { lacpInfoPortGeneralTableEntry 3 }
lacpInfoPortActSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port actor system ID"
::= { lacpInfoPortGeneralTableEntry 4 }
lacpInfoPortActSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port actor system priority"
::= { lacpInfoPortGeneralTableEntry 5 }
lacpInfoPortActAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port actor admin key"
::= { lacpInfoPortGeneralTableEntry 6 }
lacpInfoPortActOperKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port actor oper key"
::= { lacpInfoPortGeneralTableEntry 7 }
lacpInfoPortActPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port number"
::= { lacpInfoPortGeneralTableEntry 8 }
lacpInfoPortActPortPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port priority"
::= { lacpInfoPortGeneralTableEntry 9 }
lacpInfoPortIndivState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port individual state"
::= { lacpInfoPortGeneralTableEntry 10 }
lacpInfoSelAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port selected aggregator ID"
::= { lacpInfoPortGeneralTableEntry 11 }
lacpInfoAttAggrId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port attached aggregator ID"
::= { lacpInfoPortGeneralTableEntry 12 }
lacpInfoPortReadyN OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port."
::= { lacpInfoPortGeneralTableEntry 13 }
lacpInfoPortNtt OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Need to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link."
::= { lacpInfoPortGeneralTableEntry 14 }
lacpInfoPortSelected OBJECT-TYPE
SYNTAX INTEGER {
selected(1),
unselected(2),
standby(3)
, suspended(4)
, individual(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the selection logic has selected an appropriate Aggregator,
aggregation restrictions currently prevent the port from being
enabled as part of the aggregation, and so the port is being held
in standby condition.
A value of suspended indicates that the port in a LACP port-channel
cannot be aggregated due to, for example, not receiveing LACPDU.
A value of individual indicates that the port works as a normal link-up
port due to not receiving LACPDU.
"
::= { lacpInfoPortGeneralTableEntry 15 }
lacpInfoPortMoved OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in an incoming LACPDU on a different port."
::= { lacpInfoPortGeneralTableEntry 16 }
lacpInfoCollDetState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port collision and detection state"
::= { lacpInfoPortGeneralTableEntry 17 }
lacpInfoPortRxState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port RX machine state"
::= { lacpInfoPortGeneralTableEntry 18 }
lacpInfoPortMuxState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port Mux machine state"
::= { lacpInfoPortGeneralTableEntry 19 }
lacpInfoPortPerState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port periodic machine state"
::= { lacpInfoPortGeneralTableEntry 20 }
lacpInfoPortPerTraTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Periodic Transmit Timer"
::= { lacpInfoPortGeneralTableEntry 21 }
lacpInfoPortCurWhileTimer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current While Timer"
::= { lacpInfoPortGeneralTableEntry 22 }
lacpInfoPortOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
up(2),
down(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of LACP on the port."
::= { lacpInfoPortGeneralTableEntry 23 }
lacpInfoPortGeneralPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { lacpInfoPortGeneralTableEntry 24 }
lacpInfoPortActPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LACP port alias."
::= { lacpInfoPortGeneralTableEntry 25 }
lacpInfoPortAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortAdminTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port admin information."
::= { lacpInfoPort 2 }
lacpInfoPortAdminTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortAdminTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Admin information about a LACP port."
INDEX { lacpInfoPortAdminIndex }
::= { lacpInfoPortAdminTable 1 }
LacpInfoPortAdminTableEntry ::= SEQUENCE {
lacpInfoPortAdminIndex PortNumber,
lacpInfoPortActAdPortState DisplayString,
lacpInfoPortActAdActiv INTEGER,
lacpInfoPortActAdSync INTEGER,
lacpInfoPortActAdDef INTEGER,
lacpInfoPortActAdTimeout INTEGER,
lacpInfoPortActAdColl INTEGER,
lacpInfoPortActAdExp INTEGER,
lacpInfoPortActAdAggr INTEGER,
lacpInfoPortActAdDist INTEGER
,lacpInfoPortAdminPortAlias DisplayString
}
lacpInfoPortAdminIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortAdminTableEntry 1 }
lacpInfoPortActAdPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { lacpInfoPortAdminTableEntry 7 }
lacpInfoPortActAdActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Activity"
::= { lacpInfoPortAdminTableEntry 8 }
lacpInfoPortActAdSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Synchronization"
::= { lacpInfoPortAdminTableEntry 9 }
lacpInfoPortActAdDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Defaulted"
::= { lacpInfoPortAdminTableEntry 10 }
lacpInfoPortActAdTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Timeout"
::= { lacpInfoPortAdminTableEntry 11 }
lacpInfoPortActAdColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Collecting"
::= { lacpInfoPortAdminTableEntry 12 }
lacpInfoPortActAdExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Expired"
::= { lacpInfoPortAdminTableEntry 13 }
lacpInfoPortActAdAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Aggregation"
::= { lacpInfoPortAdminTableEntry 14 }
lacpInfoPortActAdDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Administrator Port Distributing"
::= { lacpInfoPortAdminTableEntry 15 }
lacpInfoPortAdminPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { lacpInfoPortAdminTableEntry 25 }
lacpInfoPortOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpInfoPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of LACP port oper information."
::= { lacpInfoPort 3 }
lacpInfoPortOperTableEntry OBJECT-TYPE
SYNTAX LacpInfoPortOperTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Oper information about a LACP port."
INDEX { lacpInfoPortOperIndex }
::= { lacpInfoPortOperTable 1 }
LacpInfoPortOperTableEntry ::= SEQUENCE {
lacpInfoPortOperIndex PortNumber,
lacpInfoPortPartOpSysPrio Integer32,
lacpInfoPortPartOpSysId DisplayString,
lacpInfoPortPartOpKey Integer32,
lacpInfoPortPartOpPortNum Integer32,
lacpInfoPortPartOpPortPrio Integer32,
lacpInfoPortActOpPortState DisplayString,
lacpInfoPortActOpActiv INTEGER,
lacpInfoPortActOpSync INTEGER,
lacpInfoPortActOpDef INTEGER,
lacpInfoPortActOpTimeout INTEGER,
lacpInfoPortActOpColl INTEGER,
lacpInfoPortActOpExp INTEGER,
lacpInfoPortActOpAggr INTEGER,
lacpInfoPortActOpDist INTEGER,
lacpInfoPortPartOpPortState DisplayString,
lacpInfoPortPartOpActiv INTEGER,
lacpInfoPortPartOpSync INTEGER,
lacpInfoPortPartOpDef INTEGER,
lacpInfoPortPartOpTimeout INTEGER,
lacpInfoPortPartOpColl INTEGER,
lacpInfoPortPartOpExp INTEGER,
lacpInfoPortPartOpAggr INTEGER,
lacpInfoPortPartOpDist INTEGER
,lacpInfoPortOperPortAlias DisplayString
}
lacpInfoPortOperIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier."
::= { lacpInfoPortOperTableEntry 1 }
lacpInfoPortPartOpSysPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of Partner Operator Port System Priority"
::= { lacpInfoPortOperTableEntry 2 }
lacpInfoPortPartOpSysId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of Partner Operator Port System ID"
::= { lacpInfoPortOperTableEntry 3 }
lacpInfoPortPartOpKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of Partner Operator Port Key"
::= { lacpInfoPortOperTableEntry 4 }
lacpInfoPortPartOpPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Partner Operator Port Number"
::= { lacpInfoPortOperTableEntry 5 }
lacpInfoPortPartOpPortPrio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of Partner Operator Port Priority"
::= { lacpInfoPortOperTableEntry 6 }
lacpInfoPortActOpPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { lacpInfoPortOperTableEntry 7 }
lacpInfoPortActOpActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Activity"
::= { lacpInfoPortOperTableEntry 8 }
lacpInfoPortActOpSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Synchronization"
::= { lacpInfoPortOperTableEntry 9 }
lacpInfoPortActOpDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Defaulted"
::= { lacpInfoPortOperTableEntry 10 }
lacpInfoPortActOpTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Timeout"
::= { lacpInfoPortOperTableEntry 11 }
lacpInfoPortActOpColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Collecting"
::= { lacpInfoPortOperTableEntry 12 }
lacpInfoPortActOpExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Expired"
::= { lacpInfoPortOperTableEntry 13 }
lacpInfoPortActOpAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Aggregation"
::= { lacpInfoPortOperTableEntry 14 }
lacpInfoPortActOpDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Actor Operator Port Distributing"
::= { lacpInfoPortOperTableEntry 15 }
lacpInfoPortPartOpPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL state"
::= { lacpInfoPortOperTableEntry 16 }
lacpInfoPortPartOpActiv OBJECT-TYPE
SYNTAX INTEGER {
active(1),
passive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Activity"
::= { lacpInfoPortOperTableEntry 17 }
lacpInfoPortPartOpSync OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Synchronization"
::= { lacpInfoPortOperTableEntry 18 }
lacpInfoPortPartOpDef OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Defaulted"
::= { lacpInfoPortOperTableEntry 19 }
lacpInfoPortPartOpTimeout OBJECT-TYPE
SYNTAX INTEGER {
short(1),
long(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Timeout"
::= { lacpInfoPortOperTableEntry 20 }
lacpInfoPortPartOpColl OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Collecting"
::= { lacpInfoPortOperTableEntry 21 }
lacpInfoPortPartOpExp OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Expired"
::= { lacpInfoPortOperTableEntry 22 }
lacpInfoPortPartOpAggr OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Aggregation"
::= { lacpInfoPortOperTableEntry 23 }
lacpInfoPortPartOpDist OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of Partner Operator Port Distributing"
::= { lacpInfoPortOperTableEntry 24 }
lacpInfoPortOperPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { lacpInfoPortOperTableEntry 25 }
-- CIST Information
cistRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { cistGeneralInfo 1 }
cistRootPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cost of the path to the CIST Root as seen from this bridge."
::= { cistGeneralInfo 2 }
cistRootPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Number of the Port which offers the lowest path cost from
this bridge to the CIST Root Bridge."
::= { cistGeneralInfo 3 }
cistBridgeHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time between the transmission of Configuration bridge
PDUs in seconds."
::= { cistGeneralInfo 4 }
cistBridgeMaxAge OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for MaxAge when this bridge
is acting as the root."
::= { cistGeneralInfo 5 }
cistBridgeForwardDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root."
::= { cistGeneralInfo 6 }
cistRegionalRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { cistGeneralInfo 7 }
cistRegionalPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cost of the path to the CIST Regional Root as seen from this
bridge."
::= { cistGeneralInfo 8 }
mstpDigest OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The digest of the mstp."
::= { cistGeneralInfo 9 }
cistPreRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is previous cist root bridge before current root bridge selected."
::= { cistGeneralInfo 10 }
cistPreRootPort OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is previous cist root port before current root port selected."
::= { cistGeneralInfo 11 }
cistRootReplaceTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Time of new cist root bridge replacing old cist root bridge."
::= { cistGeneralInfo 12}
cistRootPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Alias of the Port which offers the lowest path cost from
this bridge to the CIST Root Bridge."
::= { cistGeneralInfo 13 }
-- CIST Port Information Table
cistInfoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CistInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CIST Port information."
::= { cistInfo 2 }
cistInfoPortTableEntry OBJECT-TYPE
SYNTAX CistInfoPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CIST Port."
INDEX { cistInfoPortIndex }
::= { cistInfoPortTable 1 }
CistInfoPortTableEntry ::= SEQUENCE {
cistInfoPortIndex PortNumber,
cistInfoPortPriority Integer32,
cistInfoPortPathCost Integer32,
cistInfoPortState INTEGER,
cistInfoPortRole INTEGER,
cistInfoPortDesignatedBridge BridgeId,
cistInfoPortDesignatedPort OCTET STRING,
cistInfoPortLinkType INTEGER,
cistInfoPortHelloTime Integer32,
cistInfoPortEdge INTEGER
,cistRootInfoPortAlias DisplayString
}
cistInfoPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number of the port for which this entry contains spanning
tree configuration."
::= { cistInfoPortTableEntry 1 }
cistInfoPortPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value."
::= { cistInfoPortTableEntry 2 }
cistInfoPortPathCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards
the CIST Root which include this port."
::= { cistInfoPortTableEntry 3 }
cistInfoPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
discarding (2),
learning (4),
forwarding (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current state of the Port as defined by the Common
spanning tree protocol."
::= { cistInfoPortTableEntry 4 }
cistInfoPortRole OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
alternate(2),
backup(3),
root(4),
designated(5),
master(6),
unknown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Selected Port Role of the port for this spanning tree instance."
::= { cistInfoPortTableEntry 5 }
cistInfoPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment."
::= { cistInfoPortTableEntry 6 }
cistInfoPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port identifier of the port on the Designated Bridge
for this port's segment."
::= { cistInfoPortTableEntry 7 }
cistInfoPortLinkType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
shared(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The point-to-point status of the LAN segment attached
to this port. A value of p2p (1) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(2) indicates that this port is being treated as
having a shared media connection."
::= { cistInfoPortTableEntry 8 }
cistInfoPortHelloTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CIST port Hello Time"
::= { cistInfoPortTableEntry 9 }
cistInfoPortEdge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port is an edge port or not. Returns disabled(2) when the port is
not an edge port and returns enabled(1) when it is an edge port."
::= { cistInfoPortTableEntry 10 }
cistRootInfoPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias of the port for which this entry contains spanning
tree configuration."
::= { cistInfoPortTableEntry 11 }
-- General Information
-- VLAN information
vlanInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN information."
::= { vlanInfo 1 }
vlanInfoTableEntry OBJECT-TYPE
SYNTAX VlanInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular VLAN."
INDEX { vlanInfoId }
::= { vlanInfoTable 1 }
VlanInfoTableEntry ::= SEQUENCE {
vlanInfoId INTEGER,
vlanInfoName DisplayString,
vlanInfoStatus INTEGER,
vlanInfoPorts OCTET STRING
}
vlanInfoId OBJECT-TYPE
SYNTAX INTEGER (1..4090)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanInfoTableEntry 1 }
vlanInfoName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN name."
::= { vlanInfoTableEntry 2 }
vlanInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable, VLAN state information"
::= { vlanInfoTableEntry 3 }
vlanInfoPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN"
::= { vlanInfoTableEntry 7 }
-- L2 Operational commands
-- ----------------------------------------------------------------------------
-- --
-- Virtual Link Aggregation (VLAG) --
-- --
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- Global VLAG Configuration
-- ----------------------------------------------------------------------------
vlagCurIslCfgPortChannel OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG ISL portchannel"
DEFVAL { 0 }
::= { vlagIslCfg 1 }
vlagNewIslCfgPortChannel OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG ISL portchannel."
DEFVAL { 0 }
::= { vlagIslCfg 2 }
vlagCurIslCfgAdminKey OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG ISL admin key."
DEFVAL { 0 }
::= { vlagIslCfg 3 }
vlagNewIslCfgAdminKey OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG ISL admin key."
DEFVAL { 0 }
::= { vlagIslCfg 4 }
vlagCurCfgSwitchPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG switch priority"
DEFVAL { 0 }
::= { vlagCfg 4 }
vlagNewCfgSwitchPriority OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG priority of this switch."
DEFVAL { 0 }
::= { vlagCfg 5 }
-- Static Trunk table
vlagCurCfgTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlagCurCfgTrunkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects of the vLAG groups configured in this
switch."
::= { vlagCfg 6 }
vlagCurCfgTrunkTableEntry OBJECT-TYPE
SYNTAX VlagCurCfgTrunkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for an vLAG group."
INDEX { vlagCurCfgTrunkIndex }
::= { vlagCurCfgTrunkTable 1 }
VlagCurCfgTrunkTableEntry ::= SEQUENCE {
vlagCurCfgTrunkIndex Integer32,
vlagCurCfgTrunkState INTEGER
}
vlagCurCfgTrunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { vlagCurCfgTrunkTableEntry 1 }
vlagCurCfgTrunkState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current administrative state of the vLAG group."
DEFVAL { disabled }
::= { vlagCurCfgTrunkTableEntry 2 }
vlagNewCfgTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlagNewCfgTrunkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects of the vLAG groups configured in this
switch."
::= { vlagCfg 7 }
vlagNewCfgTrunkTableEntry OBJECT-TYPE
SYNTAX VlagNewCfgTrunkTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for an vLAG group."
INDEX { vlagNewCfgTrunkIndex }
::= { vlagNewCfgTrunkTable 1 }
VlagNewCfgTrunkTableEntry ::= SEQUENCE {
vlagNewCfgTrunkIndex Integer32,
vlagNewCfgTrunkState INTEGER
}
vlagNewCfgTrunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { vlagNewCfgTrunkTableEntry 1 }
vlagNewCfgTrunkState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new administrative state of the vLAG group."
DEFVAL { disabled }
::= { vlagNewCfgTrunkTableEntry 2 }
-- Dynamic Trunk table
vlagCurCfgLacpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlagCurCfgLacpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects of the vLAG groups configured in this
switch."
::= { vlagCfg 8 }
vlagCurCfgLacpTableEntry OBJECT-TYPE
SYNTAX VlagCurCfgLacpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for an vLAG group."
INDEX { vlagCurCfgLacpKey }
::= { vlagCurCfgLacpTable 1 }
VlagCurCfgLacpTableEntry ::= SEQUENCE {
vlagCurCfgLacpKey INTEGER,
vlagCurCfgLacpState INTEGER
}
vlagCurCfgLacpKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { vlagCurCfgLacpTableEntry 1 }
vlagCurCfgLacpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current administrative state of the vLAG group."
DEFVAL { disabled }
::= { vlagCurCfgLacpTableEntry 2 }
vlagNewCfgLacpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlagNewCfgLacpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects of the vLAG groups configured in this
switch."
::= { vlagCfg 9 }
vlagNewCfgLacpTableEntry OBJECT-TYPE
SYNTAX VlagNewCfgLacpTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for an vLAG group."
INDEX { vlagNewCfgLacpKey }
::= { vlagNewCfgLacpTable 1 }
VlagNewCfgLacpTableEntry ::= SEQUENCE {
vlagNewCfgLacpKey INTEGER,
vlagNewCfgLacpState INTEGER
}
vlagNewCfgLacpKey OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the trunk group."
::= { vlagNewCfgLacpTableEntry 1 }
vlagNewCfgLacpState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The new administrative state of the vLAG group."
DEFVAL { disabled }
::= { vlagNewCfgLacpTableEntry 2 }
vlagCurCfgHlthchkPeerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Health check Peer ip4 address."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { vlagCfg 10 }
vlagNewCfgHlthchkPeerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The New Health check Peer ip4 address."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { vlagCfg 11 }
vlagCurCfgTierId OBJECT-TYPE
SYNTAX INTEGER (0..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG Tier ID"
DEFVAL { 0 }
::= { vlagCfg 12 }
vlagNewCfgTierId OBJECT-TYPE
SYNTAX INTEGER (0..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG Tier ID of this switch.
vLAG consist of 2 vLAG peer switches connected by ISL link, the
system formed by the switches is referred to as a vLAG tier.
This object is used to specify the vLAG tier. And the tier id
is used to generate vLAG system MAC."
DEFVAL { 0 }
::= { vlagCfg 13 }
vlagCurCfgStartupDelayInterval OBJECT-TYPE
SYNTAX INTEGER (0..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG Startup delay interval"
DEFVAL { 120 }
::= { vlagCfg 14 }
vlagNewCfgStartupDelayInterval OBJECT-TYPE
SYNTAX INTEGER (0..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG startup Delay Timer
interval. The Timer is used to prevent traffic lost for the
vLAG ports may be up before the ISL is up. The Timer is st-
arted when the ISL is up and the role has been elected. And
when the timer expires, all vLAG ports will be up. Before
and during the timer running, all vLAG ports should be err-
disabled."
DEFVAL { 120 }
::= { vlagCfg 15 }
vlagCurCfgGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG global status on switch."
DEFVAL { disabled }
::= { vlagCfg 16 }
vlagNewCfgGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set true to enable vLAG globally or
Set false to disable vLAG globally on switch."
DEFVAL { disabled }
::= { vlagCfg 17 }
vlagCurCfgHlthchkConnectRetryInterval OBJECT-TYPE
SYNTAX INTEGER (1..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In case of healtcheck TCP connection can not be
established, interval at which the retry attempt
will be made to connect to the peer."
DEFVAL { 30 }
::= { vlagCfg 18 }
vlagNewCfgHlthchkConnectRetryInterval OBJECT-TYPE
SYNTAX INTEGER (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In case of healtcheck TCP connection can not be
established, interval at which the retry attempt
will be made to connect to the peer."
DEFVAL { 30 }
::= { vlagCfg 19 }
vlagCurCfgHlthchkKeepaliveAttempts OBJECT-TYPE
SYNTAX INTEGER (1..24)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of keepalive attempts made before declaring
peer is down. Within this time, atleast one of the
keepalive message should have been received from the peer."
DEFVAL { 3 }
::= { vlagCfg 20 }
vlagNewCfgHlthchkKeepaliveAttempts OBJECT-TYPE
SYNTAX INTEGER (1..24)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of keepalive attempts made before declaring
peer is down.Within this time, atleast one of the
keepalive message should have been received from the peer."
DEFVAL { 3 }
::= { vlagCfg 21 }
vlagCurCfgHlthchkKeepaliveInterval OBJECT-TYPE
SYNTAX INTEGER (2..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interval between keepalives sent over healthcheck
TCP session to keep the session alive."
DEFVAL { 5 }
::= { vlagCfg 22 }
vlagNewCfgHlthchkKeepaliveInterval OBJECT-TYPE
SYNTAX INTEGER (2..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between keepalives sent over healthcheck
TCP session to keep the session alive."
DEFVAL { 5 }
::= { vlagCfg 23 }
vlagCurCfgAutoRecoveryInterval OBJECT-TYPE
SYNTAX INTEGER (240..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current vLAG Auto Recovery interval"
DEFVAL { 300 }
::= { vlagCfg 24 }
vlagNewCfgAutoRecoveryInterval OBJECT-TYPE
SYNTAX INTEGER (240..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the vLAG Auto Recovery Timer
interval. The Timer is used to prevent all vlag ports stay
in ErrDisabled state when booting two vLAG switches but one
can not be up."
DEFVAL { 300 }
::= { vlagCfg 25 }
-- ----------------------------------------------------------------------------
-- Global VLAG Info
-- ----------------------------------------------------------------------------
vlagInfoState OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current running state of vLAG."
::= { vlagInfoSystem 1 }
vlagInfoAdminRole OBJECT-TYPE
SYNTAX INTEGER {
unelected(0),
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current running role of the switch.
Role can be Primary(1), secondary(2) and unelected(3).
Primary role indicates that the this switch controls the centralized
operation in a vLAG domain. Secondary role indicates that this
switch can take up the primary role when primary is not available.
Unelected indicates that switches are not detected by one another"
::= {vlagInfoSystem 2 }
vlagInfoISLId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vLAG ISL trunk id."
::= {vlagInfoSystem 3 }
vlagInfoLocalMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local vLAG MAC address."
::= {vlagInfoSystem 4 }
vlagInfoLocalPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Local vLAG Priority."
::= {vlagInfoSystem 5 }
vlagInfoRemoteMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote vLAG MAC address."
::= {vlagInfoSystem 6 }
vlagInfoRemotePriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote vLAG Priority."
::= {vlagInfoSystem 7 }
vlagInfoHlthchkStatus OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current health check running status."
::= { vlagInfoSystem 8 }
vlagInfoStartupDelayInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Startup Delay Timer Interval. The value may be
different from vlagCurCfgStartupDelayInterval for
the configuration of the interval after the timer
is started can only take effect next startup."
::= {vlagInfoSystem 9 }
vlagInfoStartupDelayStatus OBJECT-TYPE
SYNTAX INTEGER {
unstarted(1),
running(2),
finished(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Startup Delay Timer Status."
::= {vlagInfoSystem 10 }
vlagInfoSystemMac OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System vLAG MAC address"
::= {vlagInfoSystem 11 }
vlagInfoOperaRole OBJECT-TYPE
SYNTAX INTEGER {
unelected(0),
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vLAG switch operational role."
::= {vlagInfoSystem 12 }
vlagInfoAutoRecoveryInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Auto Recovery Timer Interval. The value may be
different from vlagCurCfgAutoRecoveryInterval for
the configuration of the interval after the timer
is started can only take effect next startup."
::= {vlagInfoSystem 13 }
vlagInfoAutoRecoveryStatus OBJECT-TYPE
SYNTAX INTEGER {
unstarted(1),
running(2),
finished(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Auto Recovery Timer Status."
::= {vlagInfoSystem 14 }
vlagInfoInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlagInfoInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects of the running vLAG instances."
::= { vlagInfoGroup 1 }
vlagInfoInstanceEntry OBJECT-TYPE
SYNTAX VlagInfoInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for an vLAG group."
INDEX { vlagInstanceId }
::= { vlagInfoInstanceTable 1 }
VlagInfoInstanceEntry ::= SEQUENCE {
vlagInstanceId Integer32,
vlagInstanceTrunkId Integer32,
vlagInstanceAdminKey Integer32,
vlagInstanceState INTEGER
}
vlagInstanceId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of this instance."
::= { vlagInfoInstanceEntry 1 }
vlagInstanceTrunkId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk id of this vLAG instance."
::= { vlagInfoInstanceEntry 2 }
vlagInstanceAdminKey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AdminKey of this vLAG instance. Applicable only incase of
dynamic trunks."
::= { vlagInfoInstanceEntry 3 }
vlagInstanceState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
localUp(2),
remoteUp(3),
formed(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current running state of the vLAG instance."
DEFVAL { down }
::= { vlagInfoInstanceEntry 4 }
vlagInfoIslId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "vLAG ISL Id"
::= {vlagInfoIslGroup 1 }
vlagInfoIslProtocol OBJECT-TYPE
SYNTAX INTEGER {
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "vLAG ISL trunk group state
Static - static trunk group
Lacp - dynamic trunk group"
::= {vlagInfoIslGroup 3 }
vlagInfoIslPortchannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "vLAG ISL portchannel number"
::= {vlagInfoIslGroup 4 }
vlagInfoIslAdminkey OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "vLAG ISL lacp admin key"
::= {vlagInfoIslGroup 5 }
vlagInfoIslPorts OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port list that forms the ISL. The ports are presented
in bitmap format.
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to ISL
0 - The represented port does not belong to ISL"
::= {vlagInfoIslGroup 6 }
vlagInfoIslPortState OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ISL member ports' protocol state. The ports' protocol
state are presented in bitmap format.
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to ISL and protocol state is up
0 - The represented port does not belong to ISL or protocol state is down"
::= {vlagInfoIslGroup 7 }
vlagInfoIslPortLinkState OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ISL member ports' link state. The ports' link state are
presented in bitmap format.
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to ISL and link state is up
0 - The represented port does not belong to ISL or link state is down"
::= {vlagInfoIslGroup 8 }
-- ----------------------------------------------------------------------------
-- Global VLAG Statistics
-- ----------------------------------------------------------------------------
-- vlagStatsSystem OBJECT IDENTIFIER ::= { vlagStats 1 }
-- vlagStatsIsl OBJECT IDENTIFIER ::= { vlagStats 2 }
-- vlagStatsHealth OBJECT IDENTIFIER ::= { vlagStats 3 }
-- vlagStatsLacp OBJECT IDENTIFIER ::= { vlagStats 4 }
-- vlagStatsPdu OBJECT IDENTIFIER ::= { vlagStats 5 }
-- vlagStatsIgmp OBJECT IDENTIFIER ::= { vlagStats 6 }
vlagStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
other(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'clear' will reset all statistics
objects of VLAG. A get action of this object will always
return 'other'. Setting this object to 'other' is not
allowed."
::= { vlagStatsSystem 1 }
vlagStatsIslInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag ISL octets received."
::= { vlagStatsIsl 1 }
vlagStatsIslInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag ISL packets received."
::= { vlagStatsIsl 2 }
vlagStatsIslOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag ISL octets sent."
::= { vlagStatsIsl 3 }
vlagStatsIslOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag ISL packets sent."
::= { vlagStatsIsl 4 }
vlagStatsPduSentRoleElection OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for role elections"
::= { vlagStatsPdu 1 }
vlagStatsPduSentSystemInfo OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for system info"
::= { vlagStatsPdu 2 }
vlagStatsPduSentFdbDynamicAdd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for addition of FDB dynamic entry"
::= { vlagStatsPdu 7 }
vlagStatsPduSentFdbDynamicDel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for deletion of FDB dynamic entry"
::= { vlagStatsPdu 8 }
vlagStatsPduSentFdbInactiveAdd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for addition of FDB inactive entry"
::= { vlagStatsPdu 9 }
vlagStatsPduSentFdbInactiveDel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for deletion of FDB inactive entry"
::= { vlagStatsPdu 10 }
vlagStatsPduSentHlthCheck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for Health check"
::= { vlagStatsPdu 13 }
vlagStatsPduSentOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for others"
::= { vlagStatsPdu 15 }
vlagStatsPduSentUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for unknowns"
::= { vlagStatsPdu 16 }
vlagStatsPduRcvRoleElection OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for role elections"
::= { vlagStatsPdu 17 }
vlagStatsPduRcvSystemInfo OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for system info"
::= { vlagStatsPdu 18 }
vlagStatsPduRcvFdbDynamicAdd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for addition of FDB dynamic entry"
::= { vlagStatsPdu 23 }
vlagStatsPduRcvFdbDynamicDel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for deletion of FDB dynamic entry"
::= { vlagStatsPdu 24 }
vlagStatsPduRcvFdbInactiveAdd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for addition of FDB inactive entry"
::= { vlagStatsPdu 25 }
vlagStatsPduRcvFdbInactiveDel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for deletion of FDB inactive entry"
::= { vlagStatsPdu 26 }
vlagStatsPduRcvHlthCheck OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for Health check"
::= { vlagStatsPdu 29 }
vlagStatsPduRcvOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for others"
::= { vlagStatsPdu 31 }
vlagStatsPduRcvUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for unknowns"
::= { vlagStatsPdu 32 }
vlagStatsPduSentPeerInstanceEnable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for peer instance enable"
::= { vlagStatsPdu 33 }
vlagStatsPduSentPeerInstanceDisable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for peer instance disable"
::= { vlagStatsPdu 34 }
vlagStatsPduSentISLHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs sent for ISL hello"
::= { vlagStatsPdu 35 }
vlagStatsPduRcvISLHello OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for ISL hello"
::= { vlagStatsPdu 36 }
vlagStatsPduRcvPeerInstanceEnable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for peer instance enable"
::= { vlagStatsPdu 37 }
vlagStatsPduRcvPeerInstanceDisable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of vlag PDUs received for peer instance disable"
::= { vlagStatsPdu 38 }
vlagStatsIgmpReportsForwarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP reports forwarded to the peer"
::= { vlagStatsIgmp 1 }
vlagStatsIgmpLeavesForwarded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP leaves forwarded to the peer"
::= { vlagStatsIgmp 2 }
-- ----------------------------------------------------------------------------
-- --
-- Service Location Protocol (SLP) --
-- --
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- Global SLP Configuration
-- ----------------------------------------------------------------------------
slpCfg OBJECT IDENTIFIER ::= { layer2Configs 20 }
slpCurCfgGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current SLP global status on switch."
DEFVAL { disabled }
::= { slpCfg 1 }
slpNewCfgGlobalEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to enabled to enable SLP globally or
Set to disabled to disable SLP globally on switch."
DEFVAL { disabled }
::= { slpCfg 2 }
slpCurCfgActiveDaDisEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current SLP active directory agent discovery status on switch."
DEFVAL { disabled }
::= { slpCfg 3 }
slpNewCfgActiveDaDisEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to enabled to enable SLP active directory agent discovery or
Set to disabled to disable SLP active directory agent discovery on switch."
DEFVAL { disabled }
::= { slpCfg 4 }
slpCurCfgActiveDaDisStartWaitTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current SLP active directory agent discovery start wait time measured in seconds."
DEFVAL { 3 }
::= { slpCfg 5 }
slpNewCfgActiveDaDisStartWaitTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to change the SLP active directory agent
discovery start wait time measured in seconds."
DEFVAL { 3 }
::= { slpCfg 6 }
-- ----------------------------------------------------------------------------
-- Global SLP Info
-- ----------------------------------------------------------------------------
slpInfo OBJECT IDENTIFIER ::= { layer2Info 18 }
slpInfoSystem OBJECT IDENTIFIER ::= { slpInfo 1 }
slpInfoDirectoryAgents OBJECT IDENTIFIER ::= { slpInfo 2 }
slpInfoUserAgents OBJECT IDENTIFIER ::= { slpInfo 3 }
slpInfoProtocolVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SLP protocol version."
DEFVAL { 2 }
::= { slpInfoSystem 1 }
slpInfoListeningPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SLP listening port."
DEFVAL { 427 }
::= { slpInfoSystem 2 }
slpInfoListeningIPInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlpInfoListeningIPInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table with all the SLP listening IP interfaces."
::= { slpInfoSystem 3 }
slpInfoListeningIPInterfaceEntry OBJECT-TYPE
SYNTAX SlpInfoListeningIPInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for a SLP listening IP interface."
INDEX { listeningIPInterfaceId }
::= { slpInfoListeningIPInterfaceTable 1 }
SlpInfoListeningIPInterfaceEntry ::= SEQUENCE {
listeningIPInterfaceId Integer32,
listeningIPInterfaceAddress IpAddress
}
listeningIPInterfaceId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of this IP interface."
::= { slpInfoListeningIPInterfaceEntry 1 }
listeningIPInterfaceAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The adddress of this IP interface."
::= { slpInfoListeningIPInterfaceEntry 2 }
slpInfoDirectoryAgentsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlpInfoDirectoryAgentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table with all the SLP Directory Agents."
::= { slpInfoDirectoryAgents 1 }
slpInfoDirectoryAgentEntry OBJECT-TYPE
SYNTAX SlpInfoDirectoryAgentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for a Directory Agent entry."
INDEX { directoryAgentAddress }
::= { slpInfoDirectoryAgentsTable 1 }
SlpInfoDirectoryAgentEntry ::= SEQUENCE {
directoryAgentAddress IpAddress,
directoryAgentPort Integer32,
directoryAgentTime Integer32
}
directoryAgentAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP adddress of this Directory Agent."
::= { slpInfoDirectoryAgentEntry 1 }
directoryAgentPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port of this Directory Agent. Communication can be done
using TCP or UDP."
::= { slpInfoDirectoryAgentEntry 2 }
directoryAgentTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time elapsed from the moment when this Directory Agent
was learned measured in seconds."
::= { slpInfoDirectoryAgentEntry 3 }
slpInfoUserAgentsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlpInfoUserAgentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table with all the SLP User Agents."
::= { slpInfoUserAgents 1 }
slpInfoUserAgentEntry OBJECT-TYPE
SYNTAX SlpInfoUserAgentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for a User Agent entry."
INDEX { userAgentAddress }
::= { slpInfoUserAgentsTable 1 }
SlpInfoUserAgentEntry ::= SEQUENCE {
userAgentAddress IpAddress,
userAgentPort Integer32,
userAgentTime Integer32
}
userAgentAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP adddress of this User Agent."
::= { slpInfoUserAgentEntry 1 }
userAgentPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port of this User Agent. Communication can be done
using TCP or UDP."
::= { slpInfoUserAgentEntry 2 }
userAgentTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time elapsed from the moment when this User Agent was learned
measured in seconds."
::= { slpInfoUserAgentEntry 3 }
slpDirectoryAgentsClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
other(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'clear' will reset all directory agents
settings of SLP. A get action of this object will always
return 'other'. Setting this object to 'other' is not
allowed."
::= { slpInfo 4 }
-- ----------------------------------------------------------------------------
-- Global SLP Statistics
-- ----------------------------------------------------------------------------
slpStats OBJECT IDENTIFIER ::= { layer2Stats 12 }
slpCountersClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
other(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'clear' will reset all SLP counters.
A get action of this object will always return 'other'.
Setting this object to 'other' is not allowed."
::= { slpStats 3 }
slpStatsTxCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlpStatsTxCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table with all the SLP Send counters."
::= { slpStats 1 }
slpStatsTxCounterEntry OBJECT-TYPE
SYNTAX SlpStatsTxCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for a SLP Send counter entry."
INDEX { slpTxCounterIndex }
::= { slpStatsTxCountersTable 1 }
SlpStatsTxCounterEntry ::= SEQUENCE {
slpTxCounterIndex Integer32,
slpTxCounterName DisplayString,
slpTxCounterUnicast Integer32,
slpTxCounterMulticast Integer32
}
slpTxCounterIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this counter."
::= { slpStatsTxCounterEntry 1 }
slpTxCounterName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of this counter."
::= { slpStatsTxCounterEntry 2 }
slpTxCounterUnicast OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unicast value of this counter."
::= { slpStatsTxCounterEntry 3 }
slpTxCounterMulticast OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast value of this counter."
::= { slpStatsTxCounterEntry 4 }
slpStatsRxCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF SlpStatsRxCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table with all the SLP Receive counters."
::= { slpStats 2 }
slpStatsRxCounterEntry OBJECT-TYPE
SYNTAX SlpStatsRxCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration objects for a SLP Receive counter entry."
INDEX { slpRxCounterIndex }
::= { slpStatsRxCountersTable 1 }
SlpStatsRxCounterEntry ::= SEQUENCE {
slpRxCounterIndex Integer32,
slpRxCounterName DisplayString,
slpRxCounterUnicast Integer32,
slpRxCounterMulticast Integer32
}
slpRxCounterIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index this counter."
::= { slpStatsRxCounterEntry 1 }
slpRxCounterName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of this counter."
::= { slpStatsRxCounterEntry 2 }
slpRxCounterUnicast OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unicast value of this counter."
::= { slpStatsRxCounterEntry 3 }
slpRxCounterMulticast OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast value of this counter."
::= { slpStatsRxCounterEntry 4 }
-- ----------------------------------------------------------------------------
-- } INSERT: layer2
-- ----------------------------------------------------------------------------
layer3 OBJECT IDENTIFIER ::= { g7052-mgmt 3 }
-- ----------------------------------------------------------------------------
-- { INSERT: layer3
-- ----------------------------------------------------------------------------
layer3Configs OBJECT IDENTIFIER ::= { layer3 1 }
layer3Stats OBJECT IDENTIFIER ::= { layer3 2 }
layer3Info OBJECT IDENTIFIER ::= { layer3 3 }
arpStats OBJECT IDENTIFIER ::= { layer3Stats 2 }
ipInterfaceCfg OBJECT IDENTIFIER ::= { layer3Configs 1 }
ipStaticRouteCfg OBJECT IDENTIFIER ::= { layer3Configs 3 }
ipForwardCfg OBJECT IDENTIFIER ::= { layer3Configs 4 }
arpCfg OBJECT IDENTIFIER ::= { layer3Configs 7 }
routeStats OBJECT IDENTIFIER ::= { layer3Stats 3 }
ipRoutingInfo OBJECT IDENTIFIER ::= { layer3Info 1 }
arpInfo OBJECT IDENTIFIER ::= { layer3Info 2 }
ipEcmpRoutingInfo OBJECT IDENTIFIER ::= { layer3Info 19 }
ipEcmpHash OBJECT IDENTIFIER ::= { layer3Info 20 }
ipGatewayCfg OBJECT IDENTIFIER ::= { layer3Configs 2 }
dnsCfg OBJECT IDENTIFIER ::= { layer3Configs 9 }
igmpCfg OBJECT IDENTIFIER ::= { layer3Configs 19 }
ipGatewayIpv6Cfg OBJECT IDENTIFIER ::= { layer3Configs 22 }
floodingCfg OBJECT IDENTIFIER ::= { layer3Configs 29 }
dnsStats OBJECT IDENTIFIER ::= { layer3Stats 4 }
clearStats OBJECT IDENTIFIER ::= { layer3Stats 7 }
igmpStats OBJECT IDENTIFIER ::= { layer3Stats 9 }
ipv6Stats OBJECT IDENTIFIER ::= { layer3Stats 10}
ipStats OBJECT IDENTIFIER ::= { layer3Stats 16 }
icmpStats OBJECT IDENTIFIER ::= { layer3Stats 17 }
tcpStats OBJECT IDENTIFIER ::= { layer3Stats 18 }
udpStats OBJECT IDENTIFIER ::= { layer3Stats 19 }
gatewayInfo OBJECT IDENTIFIER ::= { layer3Info 5 }
igmpInfo OBJECT IDENTIFIER ::= { layer3Info 6 }
gatewayIPv6Info OBJECT IDENTIFIER ::= { layer3Info 13 }
ipIntfInfo OBJECT IDENTIFIER ::= { layer3Info 9 }
dhcpInfo OBJECT IDENTIFIER ::= { layer3Info 15 }
dhcpInfoMacAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the interface."
::= { dhcpInfo 1}
dhcpInfoAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface."
::= { dhcpInfo 2}
dhcpInfoSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the interface."
::= { dhcpInfo 3}
dhcpInfoDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of default gateway for the interface."
::= { dhcpInfo 4}
dhcpInfoServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the DHCP server that leased the ip of the interface."
::= { dhcpInfo 5}
dhcpInfoLeaseObtained OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time and date when the lease was obtained ."
::= { dhcpInfo 6}
dhcpInfoLeaseExpires OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time and date when the lease was obtained ."
::= { dhcpInfo 7}
-- IP Configuration
ipInterfaceTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP interface table."
::= { ipInterfaceCfg 1 }
ipCurCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP interface configuration."
::= { ipInterfaceCfg 2 }
ipCurCfgIntfEntry OBJECT-TYPE
SYNTAX IpCurCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip interface table"
INDEX { ipCurCfgIntfIndex }
::= { ipCurCfgIntfTable 1 }
IpCurCfgIntfEntry ::= SEQUENCE {
ipCurCfgIntfIndex Integer32,
ipCurCfgIntfAddr DisplayString,
ipCurCfgIntfMask DisplayString,
ipCurCfgIntfBroadcast IpAddress,
ipCurCfgIntfState INTEGER,
ipCurCfgIntfBootpRelay INTEGER,
ipCurCfgIntfRouteAdv INTEGER,
ipCurCfgIntfManagedCfg INTEGER,
ipCurCfgIntfOtherCfg INTEGER,
ipCurCfgIntfAdvLifetime INTEGER,
ipCurCfgIntfDadAttempts INTEGER,
ipCurCfgIntfReachTime INTEGER,
ipCurCfgIntfAdvInterval INTEGER,
ipCurCfgIntfAdvIntervalMin INTEGER,
ipCurCfgIntfRetransmitTimer INTEGER,
ipCurCfgIntfHopLimit INTEGER,
ipCurCfgIntfIp6Host INTEGER,
ipCurCfgIntfIp6Dstun INTEGER,
ipCurCfgSecIntfAddr DisplayString,
ipCurCfgSecIntfPrefix Integer32,
ipCurCfgSecIntfAnycast INTEGER,
ipCurCfgIntfAnycast INTEGER,
ipCurCfgIntfVlan Integer32
}
ipCurCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the IP information is related."
::= { ipCurCfgIntfEntry 1}
ipCurCfgIntfAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipCurCfgIntfEntry 2 }
ipCurCfgIntfMask OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address ."
::= { ipCurCfgIntfEntry 3 }
ipCurCfgIntfBroadcast OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The broadcast address of the interface."
::= { ipCurCfgIntfEntry 4 }
ipCurCfgIntfVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN associated with the interface."
::= { ipCurCfgIntfEntry 5 }
ipCurCfgIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the interface."
::= { ipCurCfgIntfEntry 6 }
ipCurCfgIntfBootpRelay OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable BOOTP relay."
::= { ipCurCfgIntfEntry 7 }
ipCurCfgIntfRouteAdv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable route advertisement of the interface."
::= { ipCurCfgIntfEntry 12 }
ipCurCfgIntfManagedCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration."
::= { ipCurCfgIntfEntry 13 }
ipCurCfgIntfOtherCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration."
::= { ipCurCfgIntfEntry 14 }
ipCurCfgIntfAdvLifetime OBJECT-TYPE
SYNTAX INTEGER (0..9000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set Router Advertisement lifetime of the interface."
::= { ipCurCfgIntfEntry 15 }
ipCurCfgIntfDadAttempts OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the number of duplicate address detection (dad)
attempts of the interface."
::= { ipCurCfgIntfEntry 16 }
ipCurCfgIntfReachTime OBJECT-TYPE
SYNTAX INTEGER (0..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the advertised reachability time of the interface."
::= { ipCurCfgIntfEntry 17 }
ipCurCfgIntfAdvInterval OBJECT-TYPE
SYNTAX INTEGER (4..1800)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement interval of the interface."
::= { ipCurCfgIntfEntry 18 }
ipCurCfgIntfAdvIntervalMin OBJECT-TYPE
SYNTAX INTEGER (3..1350)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Minimum interval limit
of the interface."
::= { ipCurCfgIntfEntry 19 }
ipCurCfgIntfRetransmitTimer OBJECT-TYPE
SYNTAX INTEGER (0..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Retransmit Timer"
::= { ipCurCfgIntfEntry 20 }
ipCurCfgIntfHopLimit OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Current Hop Limit"
::= { ipCurCfgIntfEntry 21 }
ipCurCfgIntfIp6Host OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable IPv6 host mode on the interface."
::= { ipCurCfgIntfEntry 23 }
ipCurCfgSecIntfAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field configures the new IP/IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipCurCfgIntfEntry 25 }
ipCurCfgSecIntfPrefix OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 prefix length (integer in range 0..128)
associated with this IP address ."
::= { ipCurCfgIntfEntry 26 }
ipCurCfgIntfAnycast OBJECT-TYPE
SYNTAX INTEGER {
anycast(1),
none(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not."
::= { ipCurCfgIntfEntry 27 }
ipCurCfgSecIntfAnycast OBJECT-TYPE
SYNTAX INTEGER {
anycast(1),
none(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not."
::= { ipCurCfgIntfEntry 28 }
ipCurCfgIntfIp6Dstun OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable sending of ICMP Unreachable messages."
::= { ipCurCfgIntfEntry 29 }
ipNewCfgIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of interface in the new configuration block."
::= { ipInterfaceCfg 3 }
ipNewCfgIntfEntry OBJECT-TYPE
SYNTAX IpNewCfgIntfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip interface table"
INDEX { ipNewCfgIntfIndex }
::= { ipNewCfgIntfTable 1 }
IpNewCfgIntfEntry ::= SEQUENCE {
ipNewCfgIntfIndex Integer32,
ipNewCfgIntfAddr DisplayString,
ipNewCfgIntfMask DisplayString,
ipNewCfgIntfVlan Integer32,
ipNewCfgIntfState INTEGER,
ipNewCfgIntfBootpRelay INTEGER,
ipNewCfgIntfRouteAdv INTEGER,
ipNewCfgIntfIp6Host INTEGER,
ipNewCfgIntfIp6Dstun INTEGER,
ipNewCfgIntfManagedCfg INTEGER,
ipNewCfgIntfOtherCfg INTEGER,
ipNewCfgIntfAdvLifetime INTEGER,
ipNewCfgIntfDadAttempts INTEGER,
ipNewCfgIntfReachTime INTEGER,
ipNewCfgIntfAdvInterval INTEGER,
ipNewCfgIntfAdvIntervalMin INTEGER,
ipNewCfgIntfRetransmitTimer INTEGER,
ipNewCfgIntfHopLimit INTEGER,
ipNewCfgSecIntfAddr DisplayString,
ipNewCfgSecIntfPrefix Integer32,
ipNewCfgSecIntfAnycast INTEGER,
ipNewCfgIntfAnycast INTEGER,
ipNewCfgIntfDelete INTEGER
}
ipNewCfgIntfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the IP information is related."
::= { ipNewCfgIntfEntry 1 }
ipNewCfgIntfAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field configures the new IP/IPv6 addr of the interface.
Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipNewCfgIntfEntry 2 }
ipNewCfgIntfMask OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask as IPv4 dotted-quads OR
the IPv6 prefix length (integer in range 0..128)
associated with this IP address ."
::= { ipNewCfgIntfEntry 3 }
ipNewCfgIntfVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN associated with the interface."
::= { ipNewCfgIntfEntry 5 }
ipNewCfgIntfState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the interface."
::= { ipNewCfgIntfEntry 6 }
ipNewCfgIntfDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { ipNewCfgIntfEntry 7 }
ipNewCfgIntfBootpRelay OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable BOOTP relay."
::= { ipNewCfgIntfEntry 8 }
ipNewCfgIntfRouteAdv OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable route advertisement of the interface."
::= { ipNewCfgIntfEntry 13 }
ipNewCfgIntfManagedCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable Managed config flag of the interface, which
allows the host to use DHCP for address configuration."
::= { ipNewCfgIntfEntry 14 }
ipNewCfgIntfOtherCfg OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable Other config flag of the interface,
which allows the host to use DHCP for other stateful configuration."
::= { ipNewCfgIntfEntry 15 }
ipNewCfgIntfAdvLifetime OBJECT-TYPE
SYNTAX INTEGER (0..9000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set Router Advertisement lifetime of the interface."
::= { ipNewCfgIntfEntry 16 }
ipNewCfgIntfDadAttempts OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the number of duplicate address detection (dad)
attempts of the interface."
::= { ipNewCfgIntfEntry 17 }
ipNewCfgIntfReachTime OBJECT-TYPE
SYNTAX INTEGER (0..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the advertised reachability time of the interface."
::= { ipNewCfgIntfEntry 18 }
ipNewCfgIntfAdvInterval OBJECT-TYPE
SYNTAX INTEGER (4..1800)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement interval of the interface."
::= { ipNewCfgIntfEntry 19 }
ipNewCfgIntfAdvIntervalMin OBJECT-TYPE
SYNTAX INTEGER (3..1350)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Minimum interval limit
of the interface."
::= { ipNewCfgIntfEntry 20 }
ipNewCfgIntfRetransmitTimer OBJECT-TYPE
SYNTAX INTEGER (0..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Retransmit Timer"
::= { ipNewCfgIntfEntry 21 }
ipNewCfgIntfHopLimit OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the IPv6 Router Advertisement Current Hop Limit"
::= { ipNewCfgIntfEntry 22 }
ipNewCfgIntfIp6Host OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable IPv6 host mode on the interface."
::= { ipNewCfgIntfEntry 24 }
ipNewCfgSecIntfAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field configures the new IPv6 addr of the interface.
Address should be in IPv6 4-byte haxadecimal
colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipNewCfgIntfEntry 26 }
ipNewCfgSecIntfPrefix OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 prefix length (integer in range 0..128)
associated with this IP address ."
::= { ipNewCfgIntfEntry 27 }
ipNewCfgIntfAnycast OBJECT-TYPE
SYNTAX INTEGER {
anycast(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field has the value of anycast(1) if IPv6 interface address
is anycast and none(2) if not."
::= { ipNewCfgIntfEntry 28 }
ipNewCfgSecIntfAnycast OBJECT-TYPE
SYNTAX INTEGER {
anycast(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field has the value of anycast(1) if secondary IPv6 interface address
is anycast and none(2) if not."
::= { ipNewCfgIntfEntry 29 }
ipNewCfgIntfIp6Dstun OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable sending of ICMP Unreachable messages."
::= { ipNewCfgIntfEntry 30 }
-- IP Gateway Table Configuration
ipGatewayTableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IP gateway table."
::= { ipGatewayCfg 3 }
ipCurCfgGwTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of gateways in the current configuration block."
::= { ipGatewayCfg 4 }
ipCurCfgGwEntry OBJECT-TYPE
SYNTAX IpCurCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip gateway table"
INDEX { ipCurCfgGwIndex }
::= { ipCurCfgGwTable 1 }
IpCurCfgGwEntry ::= SEQUENCE {
ipCurCfgGwIndex Integer32,
ipCurCfgGwAddr IpAddress,
ipCurCfgGwInterval INTEGER,
ipCurCfgGwRetry INTEGER,
ipCurCfgGwArp INTEGER,
ipCurCfgGwState INTEGER
}
ipCurCfgGwIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway number for which the information is related."
::= { ipCurCfgGwEntry 1}
ipCurCfgGwAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the default gateway."
::= { ipCurCfgGwEntry 2 }
ipCurCfgGwInterval OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval between ping attempts."
::= { ipCurCfgGwEntry 3 }
ipCurCfgGwRetry OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed attempts to declare the default gateway DOWN."
::= { ipCurCfgGwEntry 4 }
ipCurCfgGwState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the default gateway."
::= { ipCurCfgGwEntry 5 }
ipCurCfgGwArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of ARP only health checks."
::= { ipCurCfgGwEntry 6 }
ipNewCfgGwTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of gateway in the new configuration block."
::= { ipGatewayCfg 5 }
ipNewCfgGwEntry OBJECT-TYPE
SYNTAX IpNewCfgGwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ip default gateway table"
INDEX { ipNewCfgGwIndex }
::= { ipNewCfgGwTable 1 }
IpNewCfgGwEntry ::= SEQUENCE {
ipNewCfgGwIndex Integer32,
ipNewCfgGwAddr IpAddress,
ipNewCfgGwInterval INTEGER,
ipNewCfgGwRetry INTEGER,
ipNewCfgGwState INTEGER,
ipNewCfgGwArp INTEGER,
ipNewCfgGwDelete INTEGER
}
ipNewCfgGwIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway number for which the information is related."
::= { ipNewCfgGwEntry 1}
ipNewCfgGwAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the default gateway."
::= { ipNewCfgGwEntry 2 }
ipNewCfgGwInterval OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval in seconds between ping attempts."
::= { ipNewCfgGwEntry 3 }
ipNewCfgGwRetry OBJECT-TYPE
SYNTAX INTEGER (1..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of failed attempts to declare the default gateway DOWN."
::= { ipNewCfgGwEntry 4 }
ipNewCfgGwState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the default gateway."
::= { ipNewCfgGwEntry 5 }
ipNewCfgGwDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row."
::= { ipNewCfgGwEntry 6 }
ipNewCfgGwArp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the ARP only health checks."
::= { ipNewCfgGwEntry 7 }
--
-- IP Static Route Configuration
--
ipStaticRouteTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the Static Route table."
::= { ipStaticRouteCfg 1 }
ipCurCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static routes in the current configuration block."
::= { ipStaticRouteCfg 2 }
ipCurCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpCurCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IP route table"
INDEX { ipCurCfgStaticRouteIndx }
::= { ipCurCfgStaticRouteTable 1 }
IpCurCfgStaticRouteEntry ::= SEQUENCE {
ipCurCfgStaticRouteIndx Integer32,
ipCurCfgStaticRouteDestIp IpAddress,
ipCurCfgStaticRouteMask IpAddress,
ipCurCfgStaticRouteGateway IpAddress,
ipCurCfgStaticRouteInterface Integer32
}
ipCurCfgStaticRouteIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static routing table."
::= { ipCurCfgStaticRouteEntry 1}
ipCurCfgStaticRouteDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipCurCfgStaticRouteEntry 2}
ipCurCfgStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current subnet mask of this route."
::= { ipCurCfgStaticRouteEntry 3}
ipCurCfgStaticRouteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current gateway of this route."
::= { ipCurCfgStaticRouteEntry 4}
ipCurCfgStaticRouteInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing."
::= { ipCurCfgStaticRouteEntry 5}
ipNewCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static routes in the new configuration block."
::= { ipStaticRouteCfg 3 }
ipStaticRouteClearAllByDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all static routes with the specified destination IP address."
::= { ipStaticRouteCfg 4}
ipStaticRouteClearAllByGatewayIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all static routes with the specified gateway IP address."
::= { ipStaticRouteCfg 5}
ipStaticRouteClearAllByInterface OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clears all routes on the specified inteface number."
::= { ipStaticRouteCfg 6}
ipStaticRouteClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to clear(2),clears all static routes. Otherwhise nothing is done."
::= { ipStaticRouteCfg 7}
ipStaticRouteCurPingInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time between ping retries."
::= { ipStaticRouteCfg 8}
ipStaticRouteNewPingInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time between ping retries."
::= { ipStaticRouteCfg 9}
ipStaticRouteCurPingRetries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ping retries."
::= { ipStaticRouteCfg 10}
ipStaticRouteNewPingRetries OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of ping retries."
::= { ipStaticRouteCfg 11}
ipStaticRouteCurEcmpHash OBJECT-TYPE
SYNTAX INTEGER {
dipsip(0),
sip(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ecmp Hash based on dipsip/sip."
::= { ipStaticRouteCfg 12}
ipStaticRouteNewEcmpHash OBJECT-TYPE
SYNTAX INTEGER {
dipsip(0),
sip(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ecmp Hash based on dipsip/sip."
::= { ipStaticRouteCfg 13}
ipStaticRouteCurHealthcheck OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gateway healthcheck functionality"
::= { ipStaticRouteCfg 16}
ipStaticRouteNewHealthcheck OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gateway healthcheck functionality"
::= { ipStaticRouteCfg 17}
ipNewCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpNewCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IP route table"
INDEX { ipNewCfgStaticRouteIndx }
::= { ipNewCfgStaticRouteTable 1 }
IpNewCfgStaticRouteEntry ::= SEQUENCE {
ipNewCfgStaticRouteIndx Integer32,
ipNewCfgStaticRouteDestIp IpAddress,
ipNewCfgStaticRouteMask IpAddress,
ipNewCfgStaticRouteGateway IpAddress,
ipNewCfgStaticRouteAction INTEGER,
ipNewCfgStaticRouteInterface Integer32
}
ipNewCfgStaticRouteIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the static routing table."
::= { ipNewCfgStaticRouteEntry 1}
ipNewCfgStaticRouteDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipNewCfgStaticRouteEntry 2}
ipNewCfgStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The subnet mask of this route."
::= { ipNewCfgStaticRouteEntry 3}
ipNewCfgStaticRouteGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address of the gateway for this route."
::= { ipNewCfgStaticRouteEntry 4}
ipNewCfgStaticRouteAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row."
::= { ipNewCfgStaticRouteEntry 5 }
ipNewCfgStaticRouteInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing."
::= { ipNewCfgStaticRouteEntry 6 }
-- IP Forwarding Configuration
ipFwdGeneralCfg OBJECT IDENTIFIER ::= {ipForwardCfg 1 }
ipFwdCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP forwarding global state."
::= { ipFwdGeneralCfg 1 }
ipFwdNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP forwarding global state."
::= { ipFwdGeneralCfg 2 }
ipFwdCurCfgDirectedBcast OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable forwarding directed broadcasts."
::= { ipFwdGeneralCfg 3 }
ipFwdNewCfgDirectedBcast OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable forwarding directed broadcasts."
::= { ipFwdGeneralCfg 4 }
ipFwdCurCfgICMPRedirect OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable ICMP redirects."
::= { ipFwdGeneralCfg 7 }
ipFwdNewCfgICMPRedirect OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable ICMP redirects."
::= { ipFwdGeneralCfg 8 }
--
-- ARP configuration
--
arpCurCfgReARPPeriod OBJECT-TYPE
SYNTAX INTEGER (2..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Re-ARP Period in seconds."
::= { arpCfg 1 }
arpNewCfgReARPPeriod OBJECT-TYPE
SYNTAX INTEGER (2..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Re-ARP Period in seconds."
::= { arpCfg 2 }
arpCurCfgReARPRefresh OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"With ReARP Refresh enabled, the system will send an ARP request after the ReARP Period expires, trying to relearn the ARP entry.
With ReARP Refresh disabled, no ARP request will be performed after ReARP Period expires."
::= { arpCfg 3 }
arpNewCfgReARPRefresh OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"With ReARP Refresh enabled, the system will send an ARP request after the ReARP Period expires, trying to relearn the ARP entry.
With ReARP Refresh disabled, no ARP request will be performed after ReARP Period expires."
::= { arpCfg 4 }
-- Domain Name Server Configuration
dnsCurCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DNS primary IP address in the current configuration block."
::= { dnsCfg 1 }
dnsNewCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DNS primary IP address in the new configuration block."
::= { dnsCfg 2 }
dnsCurCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DNS primary IP address in the current configuration block."
::= { dnsCfg 3 }
dnsNewCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DNS primary IP address in the new configuration block."
::= { dnsCfg 4 }
dnsCurCfgDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..191))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DNS doamin name in the current configuration block."
::= { dnsCfg 5 }
dnsNewCfgDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..191))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DNS doamin name in the new configuration block."
::= { dnsCfg 6 }
dnsNewCfgFirstRequestAddr OBJECT-TYPE
SYNTAX INTEGER{
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of the first request to dns"
::= { dnsCfg 9 }
dnsCurCfgFirstRequestAddr OBJECT-TYPE
SYNTAX INTEGER{
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the first request to dns"
::= { dnsCfg 10}
dnsCurCfgPriServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the primary server is connected to."
::= { dnsCfg 11 }
dnsNewCfgPriServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the primary server is connected to."
::= { dnsCfg 12 }
dnsCurCfgSecServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Choose the port that the secondary server is connected to."
::= { dnsCfg 13 }
dnsNewCfgSecServerPort OBJECT-TYPE
SYNTAX INTEGER {
data(1),
mgt(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Choose the port that the secondary server is connected to."
::= { dnsCfg 14 }
vlanFloodCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanFloodCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN flooding configuration."
::= { floodingCfg 1 }
vlanFloodCurCfgTableEntry OBJECT-TYPE
SYNTAX VlanFloodCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN flooding configuration table."
INDEX { vlanFloodCurCfgVlanId }
::= { vlanFloodCurCfgTable 1 }
VlanFloodCurCfgTableEntry ::= SEQUENCE {
vlanFloodCurCfgVlanId Integer32,
vlanFloodCurCfgFlood INTEGER
,vlanFloodCurCfgCpu INTEGER
,vlanFloodCurCfgOptFlood INTEGER
}
vlanFloodCurCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanFloodCurCfgTableEntry 1 }
vlanFloodCurCfgFlood OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable flooding unregistered IPMCs"
::= { vlanFloodCurCfgTableEntry 2 }
vlanFloodCurCfgCpu OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable sending unregistered IPMCs to CPU"
::= { vlanFloodCurCfgTableEntry 3 }
vlanFloodCurCfgOptFlood OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable optimized flooding"
::= { vlanFloodCurCfgTableEntry 4 }
vlanFloodNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanFloodNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of VLAN flooding configuration."
::= { floodingCfg 2 }
vlanFloodNewCfgTableEntry OBJECT-TYPE
SYNTAX VlanFloodNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the VLAN flooding configuration table."
INDEX { vlanFloodNewCfgVlanId }
::= { vlanFloodNewCfgTable 1 }
VlanFloodNewCfgTableEntry ::= SEQUENCE {
vlanFloodNewCfgVlanId Integer32,
vlanFloodNewCfgFlood INTEGER
,vlanFloodNewCfgCpu INTEGER
,vlanFloodNewCfgOptFlood INTEGER
}
vlanFloodNewCfgVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier."
::= { vlanFloodNewCfgTableEntry 1 }
vlanFloodNewCfgFlood OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable flooding unregistered IPMCs"
::= { vlanFloodNewCfgTableEntry 2 }
vlanFloodNewCfgCpu OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable sending unregistered IPMCs to CPU"
::= { vlanFloodNewCfgTableEntry 3 }
vlanFloodNewCfgOptFlood OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable optimized flooding"
::= { vlanFloodNewCfgTableEntry 4 }
-- IGMP config
igmpCurCfgOnOff OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Globally turn IGMP On/Off."
::= { igmpCfg 1}
igmpNewCfgOnOff OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn IGMP On/Off."
::= { igmpCfg 2}
igmpSnoopCfg OBJECT IDENTIFIER ::= { igmpCfg 9 }
-- IGMP Snooping config
igmpSnoopCurCfgMrto OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of multicast router timeout in the current config."
::= { igmpSnoopCfg 7 }
igmpSnoopNewCfgMrto OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of multicast router timeout in the new config."
::= { igmpSnoopCfg 8 }
igmpSnoopCurCfgAggrEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Report aggregation."
::= { igmpSnoopCfg 9}
igmpSnoopNewCfgAggrEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Report aggregation."
::= { igmpSnoopCfg 10}
igmpSnoopCurCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of IGMP Snooping."
::= { igmpSnoopCfg 11}
igmpSnoopNewCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP Snooping."
::= { igmpSnoopCfg 12}
igmpSnoopNewCfgVlanAdd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be added to snooping vlan list. When read,
0 is returned."
::= { igmpSnoopCfg 13 }
igmpSnoopNewCfgVlanRem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be removed from snooping vlan list. When read,
0 is returned."
::= { igmpSnoopCfg 14 }
igmpSnoopNewCfgVlanClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Removing ALL Snooping Vlans."
::= { igmpSnoopCfg 15 }
igmpSnoopCurCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The snooping vlans present in the vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled."
::= { igmpSnoopCfg 16 }
igmpSnoopNewCfgVlanBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping vlans present in the vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled."
::= { igmpSnoopCfg 17 }
igmpSnoopCurCfgSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in current config."
::= { igmpSnoopCfg 26 }
igmpSnoopNewCfgSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in new config."
::= { igmpSnoopCfg 27 }
igmpSnoopSetToDefault OBJECT-TYPE
SYNTAX INTEGER {
none(1),
setDefault(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When setting the value setDefault(2), the IGMP Snooping configuration
is set to the default values. When reading, none(1) is always
returned."
::= { igmpSnoopCfg 33}
igmpStaticMrtrCfg OBJECT IDENTIFIER ::= { igmpCfg 10 }
igmpFilterCfg OBJECT IDENTIFIER ::= { igmpCfg 11 }
igmpAdvCfg OBJECT IDENTIFIER ::= { igmpCfg 13 }
igmpV3SnoopCfg OBJECT IDENTIFIER ::= { igmpCfg 14 }
igmpV3SnoopCurCfgSources OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sources to snoop in a group record in current config."
::= { igmpV3SnoopCfg 1 }
igmpV3SnoopNewCfgSources OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of sources to snoop in a group record in new config."
::= { igmpV3SnoopCfg 2 }
igmpV3SnoopCurCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of IGMP V3 Snooping."
::= { igmpV3SnoopCfg 3 }
igmpV3SnoopNewCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP V3 Snooping."
::= { igmpV3SnoopCfg 4 }
igmpV3SnoopCurCfgExcludeEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of IGMP V3 EXCLUDE filter-mode Snooping."
::= { igmpV3SnoopCfg 5 }
igmpV3SnoopNewCfgExcludeEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping."
::= { igmpV3SnoopCfg 6 }
igmpV3SnoopCurCfgV1V2EnaDis OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of IGMP V1/V2 Report Snooping."
::= { igmpV3SnoopCfg 7 }
igmpV3SnoopNewCfgV1V2EnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Enable/Disable of IGMP V1/V2 Report Snooping."
::= { igmpV3SnoopCfg 8 }
-- IGMP Static Mrtr Support
igmpStaticMrtrCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticMrtrCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP Static Multicast Router table in the current configuration block."
::= { igmpStaticMrtrCfg 1 }
igmpStaticMrtrCurCfgTableEntry OBJECT-TYPE
SYNTAX IgmpStaticMrtrCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Static Multicast Router table."
INDEX { igmpStaticMrtrCurCfgIndx }
::= { igmpStaticMrtrCurCfgTable 1 }
IgmpStaticMrtrCurCfgTableEntry ::= SEQUENCE {
igmpStaticMrtrCurCfgIndx INTEGER,
igmpStaticMrtrCurCfgPortId PortNumber,
igmpStaticMrtrCurCfgVlanId INTEGER,
igmpStaticMrtrCurCfgVersion INTEGER
,igmpStaticMrtrCurCfgPortAlias DisplayString
}
igmpStaticMrtrCurCfgIndx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router table port index."
::= { igmpStaticMrtrCurCfgTableEntry 1 }
igmpStaticMrtrCurCfgPortId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the current configuration block."
::= { igmpStaticMrtrCurCfgTableEntry 2 }
igmpStaticMrtrCurCfgVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the current configuration block."
::= { igmpStaticMrtrCurCfgTableEntry 3 }
igmpStaticMrtrCurCfgVersion OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2),
version3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP version of the IGMP Static Multicast Router."
::= { igmpStaticMrtrCurCfgTableEntry 4 }
igmpStaticMrtrCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router port alias in the current configuration block."
::= { igmpStaticMrtrCurCfgTableEntry 5 }
igmpStaticMrtrNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpStaticMrtrNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP Static Multicast Router table in the new configuration block."
::= { igmpStaticMrtrCfg 2 }
igmpStaticMrtrNewCfgTableEntry OBJECT-TYPE
SYNTAX IgmpStaticMrtrNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Static Multicast Router table."
INDEX { igmpStaticMrtrNewCfgIndx }
::= { igmpStaticMrtrNewCfgTable 1 }
IgmpStaticMrtrNewCfgTableEntry ::= SEQUENCE {
igmpStaticMrtrNewCfgIndx INTEGER,
igmpStaticMrtrNewCfgPortId PortNumber,
igmpStaticMrtrNewCfgVlanId INTEGER,
igmpStaticMrtrNewCfgVersion INTEGER,
igmpStaticMrtrNewCfgDelete INTEGER
,igmpStaticMrtrNewCfgPortAlias DisplayString
}
igmpStaticMrtrNewCfgIndx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Multicast Router table port index."
::= { igmpStaticMrtrNewCfgTableEntry 1 }
igmpStaticMrtrNewCfgPortId OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the new configuration block."
::= { igmpStaticMrtrNewCfgTableEntry 2 }
igmpStaticMrtrNewCfgVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IGMP Multicast Router port in the new configuration block."
::= { igmpStaticMrtrNewCfgTableEntry 3 }
igmpStaticMrtrNewCfgVersion OBJECT-TYPE
SYNTAX INTEGER {
version1(1),
version2(2),
version3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IGMP version of the IGMP Static Multicast Router."
::= { igmpStaticMrtrNewCfgTableEntry 4 }
igmpStaticMrtrNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { igmpStaticMrtrNewCfgTableEntry 5 }
igmpStaticMrtrNewCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IGMP Multicast Router port alias in the new configuration block."
::= { igmpStaticMrtrNewCfgTableEntry 6 }
igmpStaticMrtrNewCfgClear OBJECT-TYPE
SYNTAX INTEGER {
other(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to the value of 2 (clear), the entire table is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(clear) has no effect on the table."
::= { igmpStaticMrtrCfg 3 }
-- IGMP Filtering
igmpFltCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering table in the current configuration block."
::= { igmpFilterCfg 1 }
igmpFltCurCfgTableEntry OBJECT-TYPE
SYNTAX IgmpFltCurCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the filtering table."
INDEX { igmpFltCurCfgIndx }
::= { igmpFltCurCfgTable 1 }
IgmpFltCurCfgTableEntry ::= SEQUENCE {
igmpFltCurCfgIndx INTEGER,
igmpFltCurCfgMcastIp1 IpAddress,
igmpFltCurCfgMcastIp2 IpAddress,
igmpFltCurCfgAction INTEGER,
igmpFltCurCfgState INTEGER
}
igmpFltCurCfgIndx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filter table index."
::= { igmpFltCurCfgTableEntry 1 }
igmpFltCurCfgMcastIp1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Range1 Multicast IP address to be filtered."
::= { igmpFltCurCfgTableEntry 2 }
igmpFltCurCfgMcastIp2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Range2 Multicast IP address to be filtered."
::= { igmpFltCurCfgTableEntry 3 }
igmpFltCurCfgAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action for the IGMP filtering rule."
::= { igmpFltCurCfgTableEntry 4 }
igmpFltCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this IGMP filtering rule."
::= { igmpFltCurCfgTableEntry 5 }
igmpFltNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering table in the current configuration block."
::= { igmpFilterCfg 2 }
igmpFltNewCfgTableEntry OBJECT-TYPE
SYNTAX IgmpFltNewCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the filtering table."
INDEX { igmpFltNewCfgIndx }
::= { igmpFltNewCfgTable 1 }
IgmpFltNewCfgTableEntry ::= SEQUENCE {
igmpFltNewCfgIndx INTEGER,
igmpFltNewCfgMcastIp1 IpAddress,
igmpFltNewCfgMcastIp2 IpAddress,
igmpFltNewCfgAction INTEGER,
igmpFltNewCfgState INTEGER,
igmpFltNewCfgDelete INTEGER
}
igmpFltNewCfgIndx OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filter table index."
::= { igmpFltNewCfgTableEntry 1 }
igmpFltNewCfgMcastIp1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Range1 Multicast source IP address to be filtered."
::= { igmpFltNewCfgTableEntry 2 }
igmpFltNewCfgMcastIp2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Range2 Multicast source IP address to be filtered."
::= { igmpFltNewCfgTableEntry 3 }
igmpFltNewCfgAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action for the IGMP filtering rule."
::= { igmpFltNewCfgTableEntry 4 }
igmpFltNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of this IGMP filtering rule."
::= { igmpFltNewCfgTableEntry 5 }
igmpFltNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row."
::= { igmpFltNewCfgTableEntry 6 }
-- IGMP Filtering Port Table
igmpFltCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering port table in the current configuration block."
::= { igmpFilterCfg 3 }
igmpFltCurCfgPortTableEntry OBJECT-TYPE
SYNTAX IgmpFltCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IGMP filtering port table."
INDEX { igmpFltCurCfgPortIndx }
::= { igmpFltCurCfgPortTable 1 }
IgmpFltCurCfgPortTableEntry ::= SEQUENCE {
igmpFltCurCfgPortIndx PortNumber,
igmpFltCurCfgPortState INTEGER,
igmpFltCurCfgPortFiltBmap OCTET STRING
,igmpFltCurCfgPortAlias DisplayString
}
igmpFltCurCfgPortIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { igmpFltCurCfgPortTableEntry 1 }
igmpFltCurCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable or disable IGMP filtering."
::= { igmpFltCurCfgPortTableEntry 2 }
igmpFltCurCfgPortFiltBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to igmpFltCurCfgTable)
where x : 1 - The represented IGMP filter rule applied to the port
0 - The represented IGMP filter rule not applied to the port "
::= { igmpFltCurCfgPortTableEntry 3 }
igmpFltCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { igmpFltCurCfgPortTableEntry 4 }
igmpFltNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpFltNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IGMP filtering port table in the new configuration block."
::= { igmpFilterCfg 4 }
igmpFltNewCfgPortTableEntry OBJECT-TYPE
SYNTAX IgmpFltNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IGMP filtering port table."
INDEX { igmpFltNewCfgPortIndx }
::= { igmpFltNewCfgPortTable 1 }
IgmpFltNewCfgPortTableEntry ::= SEQUENCE {
igmpFltNewCfgPortIndx PortNumber,
igmpFltNewCfgPortState INTEGER,
igmpFltNewCfgPortFiltBmap OCTET STRING,
igmpFltNewCfgPortAddFiltRule INTEGER,
igmpFltNewCfgPortRemFiltRule INTEGER
,igmpFltNewCfgPortAlias DisplayString
}
igmpFltNewCfgPortIndx OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port index."
::= { igmpFltNewCfgPortTableEntry 1 }
igmpFltNewCfgPortState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable IGMP filtering."
::= { igmpFltNewCfgPortTableEntry 2 }
igmpFltNewCfgPortFiltBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to fltNewCfgTable)
where x : 1 - The represented filter rule applied to the port
0 - The represented filter rule not applied to the port "
::= { igmpFltNewCfgPortTableEntry 3 }
igmpFltNewCfgPortAddFiltRule OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the
value '0' is returned always."
::= { igmpFltNewCfgPortTableEntry 4 }
igmpFltNewCfgPortRemFiltRule OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read,
the value '0' is returned always."
::= { igmpFltNewCfgPortTableEntry 5 }
igmpFltNewCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { igmpFltNewCfgPortTableEntry 6 }
igmpFltCurCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Filtering."
::= { igmpFilterCfg 5 }
igmpFltNewCfgEnaDis OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable of IGMP Filtering."
::= { igmpFilterCfg 6 }
--
-- IGMP Configuration Advanced Menu
--
igmpAdvCurCfgQInterval OBJECT-TYPE
SYNTAX INTEGER(1..600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Query Interval of current config."
::= { igmpAdvCfg 1 }
igmpAdvNewCfgQInterval OBJECT-TYPE
SYNTAX INTEGER(1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IGMP Query Interval of new config."
::= { igmpAdvCfg 2 }
igmpAdvCurCfgRobust OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of expected packet loss on subnet in current config."
::= { igmpAdvCfg 3 }
igmpAdvNewCfgRobust OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the value of expected packet loss on subnet."
::= { igmpAdvCfg 4 }
igmpAdvCurCfgTimeout OBJECT-TYPE
SYNTAX INTEGER(1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMP Report timeout."
::= { igmpAdvCfg 5 }
igmpAdvNewCfgTimeout OBJECT-TYPE
SYNTAX INTEGER(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set IGMP Report timeout."
::= { igmpAdvCfg 6 }
igmpAdvNewCfgVlanFastlvAdd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be added to quick-leave vlan list. When read,
0 is returned."
::= { igmpAdvCfg 7 }
igmpAdvNewCfgVlanFastlvRem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN to be removed from quick-leave vlan list. When read,
0 is returned."
::= { igmpAdvCfg 8 }
igmpAdvCurCfgVlanFastlvBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fast-leave enabled vlans present in the vlan map list.
The fast-leave enabled vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has fast-leave enabled
0 - The represented vlan does not have fast-leave enabled."
::= { igmpAdvCfg 9 }
igmpAdvNewCfgVlanFastlvBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fast-leave enabled vlans present in the vlan map list.
The fast-leave enabled vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has fast-leave enabled
0 - The represented vlan does not have fast-leave enabled."
::= { igmpAdvCfg 10 }
igmpAdvCurCfgRtrAlert OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable sending IGMP messages with Router Alert option."
::= { igmpAdvCfg 15 }
igmpAdvNewCfgRtrAlert OBJECT-TYPE
SYNTAX INTEGER{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable sending IGMP messages with Router Alert option."
::= { igmpAdvCfg 16 }
igmpCurQurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpCurQurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP querier configuration."
::= { igmpCfg 15 }
igmpCurQurCfgEntry OBJECT-TYPE
SYNTAX IgmpCurQurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IGMP querier configuration table"
INDEX { igmpCurQurCfgVlanIndex }
::= { igmpCurQurCfgTable 1 }
IgmpCurQurCfgEntry ::= SEQUENCE {
igmpCurQurCfgVlanIndex INTEGER,
igmpCurQuerierState INTEGER,
igmpCurCfgQuerier INTEGER,
igmpCurCfgQueryInterval INTEGER,
igmpCurCfgQurSrcIp IpAddress,
igmpCurCfgElectionType INTEGER,
igmpCurCfgQurRobustness INTEGER,
igmpCurCfgQurStartupCnt INTEGER,
igmpCurCfgQurStartupInt INTEGER,
igmpCurCfgQurMaxRespTime INTEGER,
igmpCurCfgOtherQurAddress DisplayString,
igmpCurCfgOtherQurPresentInt DisplayString,
igmpCurCfgVlanOperVersion INTEGER,
igmpCurVlanOperVersion INTEGER,
igmpCurVlanOlderVerTimer DisplayString
}
igmpCurQurCfgVlanIndex OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan number for which the IGMP querier information is related."
::= { igmpCurQurCfgEntry 1}
igmpCurQuerierState OBJECT-TYPE
SYNTAX INTEGER {
querier(1),
nonQuerier(2),
checkingMembership(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any other querier in the VLAN, It will move to non querier
state. If a leave is received then querier moves to checking membership state."
::= { igmpCurQurCfgEntry 2}
igmpCurCfgQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the switch receives
the query message from any other querier with lower IP/MAC in the VLAN."
::= { igmpCurQurCfgEntry 3}
igmpCurCfgQueryInterval OBJECT-TYPE
SYNTAX INTEGER(1..608)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN."
::= { igmpCurQurCfgEntry 4 }
igmpCurCfgQurSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch."
::= { igmpCurQurCfgEntry 5 }
igmpCurCfgElectionType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
macaddr(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address."
::= { igmpCurQurCfgEntry 6 }
igmpCurCfgQurRobustness OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the Other
Querier Present Interval."
::= { igmpCurQurCfgEntry 7 }
igmpCurCfgQurStartupCnt OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval."
::= { igmpCurQurCfgEntry 8 }
igmpCurCfgQurStartupInt OBJECT-TYPE
SYNTAX INTEGER(1..608)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval."
::= { igmpCurQurCfgEntry 9 }
igmpCurCfgQurMaxRespTime OBJECT-TYPE
SYNTAX INTEGER(1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum query response interval advertised in
IGMP queries on this VLAN."
::= { igmpCurQurCfgEntry 10 }
igmpCurCfgOtherQurAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan."
::= { igmpCurQurCfgEntry 11 }
igmpCurCfgOtherQurPresentInt OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) times (the Query Interval)) plus
(one half of one Query Response Interval)."
::= { igmpCurQurCfgEntry 12 }
igmpCurCfgVlanOperVersion OBJECT-TYPE
SYNTAX INTEGER {
igmpV1(1),
igmpV2(2),
igmpV3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'bosIgsVlanCfgOperVersion'
should be configured on the basis of the version of the router
present in the VLAN."
::= { igmpCurQurCfgEntry 13 }
igmpCurVlanOperVersion OBJECT-TYPE
SYNTAX INTEGER {
igmpV1(1),
igmpV2(2),
igmpV3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3)."
::= { igmpCurQurCfgEntry 14 }
igmpCurVlanOlderVerTimer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
In order to switch gracefully between versions of IGMP, hosts keep both an
IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan.
According to RFC 3376 this value is ((the Robustness Variable) times
(the Query Interval)) plus (one Query Response Interval)."
::= { igmpCurQurCfgEntry 15 }
igmpNewQurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpNewQurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP querier configuration."
::= { igmpCfg 16 }
igmpNewQurCfgEntry OBJECT-TYPE
SYNTAX IgmpNewQurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IGMP querier configuration table"
INDEX { igmpNewQurCfgVlanIndex }
::= { igmpNewQurCfgTable 1 }
IgmpNewQurCfgEntry ::= SEQUENCE {
igmpNewQurCfgVlanIndex INTEGER,
igmpNewQuerierState INTEGER,
igmpNewCfgQuerier INTEGER,
igmpNewCfgQueryInterval INTEGER,
igmpNewCfgQurSrcIp IpAddress,
igmpNewCfgElectionType INTEGER,
igmpNewCfgQurRobustness INTEGER,
igmpNewCfgQurStartupCnt INTEGER,
igmpNewCfgQurStartupInt INTEGER,
igmpNewCfgQurMaxRespTime INTEGER,
igmpNewCfgOtherQurAddress DisplayString,
igmpNewCfgOtherQurPresentInt DisplayString,
igmpNewCfgVlanOperVersion INTEGER,
igmpNewVlanOperVersion INTEGER,
igmpNewVlanOlderVerTimer DisplayString,
igmpNewCfgQuerierDefault INTEGER
}
igmpNewQurCfgVlanIndex OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan number for which the IGMP querier information is related."
::= { igmpNewQurCfgEntry 1}
igmpNewQuerierState OBJECT-TYPE
SYNTAX INTEGER {
querier(1),
nonQuerier(2),
checkingMembership(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the switch is running as a querier in the VLAN.
Based on the querier election, if elected as a querier, it will
send query messages. If the switch receives the query message with
lower IP/MAC any other querier in the VLAN, It will move to non querier
state. If a leave is received then querier moves to checking membership state."
::= { igmpNewQurCfgEntry 2}
igmpNewCfgQuerier OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The snooping switch can be configured to send IGMP queries.
querier are not present in the VLAN and it set to
'enabled' the switch will generate general query messages.
The query messages will be suppressed if the switch receives
the query message from any other querier with lower IP/MAC in the VLAN."
::= { igmpNewQurCfgEntry 3}
igmpNewCfgQueryInterval OBJECT-TYPE
SYNTAX INTEGER(1..608)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN."
::= { igmpNewQurCfgEntry 4 }
igmpNewCfgQurSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source ip for GSQ proxy in this vlan. This Src Ip will be used in
querier election mechanism. It will be the source address in queries sent bye
the switch."
::= { igmpNewQurCfgEntry 5 }
igmpNewCfgElectionType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
macaddr(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The querier selection type specify the criteria to be used to elect
querier for this VLAN. When a switch is configured as a querier,
this will define the election criteria . e.g. MAC or source IP-address."
::= { igmpNewQurCfgEntry 6 }
igmpNewCfgQurRobustness OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Robustness Variable allows tuning for the Other
Querier Present Interval."
::= { igmpNewQurCfgEntry 7 }
igmpNewCfgQurStartupCnt OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents the number of Queries sent out on startup of
querier election, separated by the Startup Query Interval."
::= { igmpNewQurCfgEntry 8 }
igmpNewCfgQurStartupInt OBJECT-TYPE
SYNTAX INTEGER(1..608)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable represents the interval(in seconds) between General
Queries sent by a Querier on startup. By default: 1/4 the Query Interval."
::= { igmpNewQurCfgEntry 9 }
igmpNewCfgQurMaxRespTime OBJECT-TYPE
SYNTAX INTEGER(1..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum query response interval advertised in
IGMP queries on this VLAN."
::= { igmpNewQurCfgEntry 10 }
igmpNewCfgOtherQurAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP/MAC Address of the Querier, which has won the Querier election,
when bosSnoopVlanCfgQuerier is enabled on this vlan."
::= { igmpNewQurCfgEntry 11 }
igmpNewCfgOtherQurPresentInt OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Other Querier Present Interval is the length of time that must
pass before switch decides that there is no longer another
multicast router which should be the querier. This value
is ((the Robustness Variable) times (the Query Interval)) plus
(one half of one Query Response Interval)."
::= { igmpNewQurCfgEntry 12 }
igmpNewCfgVlanOperVersion OBJECT-TYPE
SYNTAX INTEGER {
igmpV1(1),
igmpV2(2),
igmpV3(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operating version of the IGMP snooping switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3). The 'igmpNewCfgVlanOperVersion'
should be configured on the basis of the version of the mrouter
present in the VLAN."
::= { igmpNewQurCfgEntry 13 }
igmpNewVlanOperVersion OBJECT-TYPE
SYNTAX INTEGER {
igmpV1(1),
igmpV2(2),
igmpV3(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the operating version of the IGMP snooping switch for
specific VLAN. The default operating mode on a specific VLAN
IGMP version 3 i.e, V3(3)."
::= { igmpNewQurCfgEntry 14 }
igmpNewVlanOlderVerTimer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the remaining time of lowest operating version of the vlan.
For interoperability with multicast routers/switches/Hosts, running older
versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
In order to switch gracefully between versions of IGMP, hosts keep both an
IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan.
According to RFC 3376 this value is ((the Robustness Variable) times
(the Query Interval)) plus (one Query Response Interval)."
::= { igmpNewQurCfgEntry 15 }
igmpNewCfgQuerierDefault OBJECT-TYPE
SYNTAX INTEGER {
other(1),
default(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action to set the default IGMP Querier settings on a Vlan.
Returns other(1) when read."
::= { igmpNewQurCfgEntry 16 }
igmpCurCfgQuerierOnOff OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of IGMP Querier."
::= { igmpCfg 17}
igmpNewCfgQuerierOnOff OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally turn IGMP Querier On/Off."
::= { igmpCfg 18}
--
-- IPMC Static Route Configuration
--
ipmcStaticRouteCfg OBJECT IDENTIFIER ::= { layer3Configs 20 }
ipmcStaticRouteTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IPMC Static Route table."
::= { ipmcStaticRouteCfg 1 }
ipmcCurCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpmcCurCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of static IPMC routes in the current configuration block."
::= { ipmcStaticRouteCfg 2 }
ipmcCurCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpmcCurCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IPMC route table"
INDEX { ipmcCurCfgStaticRouteIndx }
::= { ipmcCurCfgStaticRouteTable 1 }
IpmcCurCfgStaticRouteEntry ::= SEQUENCE {
ipmcCurCfgStaticRouteIndx Integer32,
ipmcCurCfgStaticRouteDestIp IpAddress,
ipmcCurCfgStaticRouteVlanId Integer32,
ipmcCurCfgStaticRouteHostBmap OCTET STRING,
ipmcCurCfgStaticRoutePMrtrBmap OCTET STRING,
ipmcCurCfgStaticRouteBMrtrBmap OCTET STRING,
ipmcCurCfgStaticRouteAdminkeys DisplayString,
ipmcCurCfgStaticRouteTrunks OCTET STRING
}
ipmcCurCfgStaticRouteIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the IPMC static routing table."
::= { ipmcCurCfgStaticRouteEntry 1}
ipmcCurCfgStaticRouteDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IPMC address of this IPMC route."
::= { ipmcCurCfgStaticRouteEntry 2}
ipmcCurCfgStaticRouteVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vlan id of this route."
::= { ipmcCurCfgStaticRouteEntry 3}
ipmcCurCfgStaticRouteHostBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Host Port is added
0 - The represented Host Port is not added"
::= { ipmcCurCfgStaticRouteEntry 4}
ipmcCurCfgStaticRoutePMrtrBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Primary Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Primary Mrouter Port is added
0 - The represented Primary Mrouter Port is not added"
::= { ipmcCurCfgStaticRouteEntry 5}
ipmcCurCfgStaticRouteBMrtrBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Backup Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Backup Mrouter Port is added
0 - The represented Backup Mrouter Port is not added"
::= { ipmcCurCfgStaticRouteEntry 6}
ipmcCurCfgStaticRouteAdminkeys OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP port adminkey of this route.
Adminkeys on five positions alligned to right, separated by commas."
::= { ipmcCurCfgStaticRouteEntry 8}
ipmcCurCfgStaticRouteTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to IPMC route
0 - The represented trunk does not belong to IPMC route"
::= { ipmcCurCfgStaticRouteEntry 9 }
ipmcNewCfgStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpmcNewCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IPMC static routes in the new
configuration block.
When creating a new route, Destination IP
and Vlan id must be set first.
The actual change in configuration occurs
on using PortInfo leaf."
::= { ipmcStaticRouteCfg 3 }
ipmcNewCfgStaticRouteEntry OBJECT-TYPE
SYNTAX IpmcNewCfgStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the static IPMC route table"
INDEX { ipmcNewCfgStaticRouteIndx }
::= { ipmcNewCfgStaticRouteTable 1 }
IpmcNewCfgStaticRouteEntry ::= SEQUENCE {
ipmcNewCfgStaticRouteIndx Integer32,
ipmcNewCfgStaticRouteDestIp IpAddress,
ipmcNewCfgStaticRouteVlanId Integer32,
ipmcNewCfgStaticRouteHostBmap OCTET STRING,
ipmcNewCfgStaticRoutePMrtrBmap OCTET STRING,
ipmcNewCfgStaticRouteBMrtrBmap OCTET STRING,
ipmcNewCfgStaticRouteAddPortIndex Integer32,
ipmcNewCfgStaticRouteRemPortIndex Integer32,
ipmcNewCfgStaticRouteTrunks OCTET STRING,
ipmcNewCfgStaticRouteAddTrunk INTEGER,
ipmcNewCfgStaticRouteRemTrunk INTEGER,
ipmcNewCfgStaticRouteAdminkeys DisplayString,
ipmcNewCfgStaticRouteAddAdminkey INTEGER,
ipmcNewCfgStaticRouteRemAdminkey INTEGER,
ipmcNewCfgStaticRoutePortInfo INTEGER,
ipmcNewCfgStaticRouteDelete INTEGER
,ipmcNewCfgStaticRouteAddPortAlias DisplayString
,ipmcNewCfgStaticRouteRemPortAlias DisplayString
}
ipmcNewCfgStaticRouteIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the IPMC static routing table."
::= { ipmcNewCfgStaticRouteEntry 1}
ipmcNewCfgStaticRouteDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination IPMC address of this route.
It must be set along Vlan id before creating
new route."
::= { ipmcNewCfgStaticRouteEntry 2}
ipmcNewCfgStaticRouteVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The vlan id of this route.
It must be set along Destination IP before
creating new route."
::= { ipmcNewCfgStaticRouteEntry 3}
ipmcNewCfgStaticRouteHostBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Host ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Host Port is added
0 - The represented Host Port is not added"
::= { ipmcNewCfgStaticRouteEntry 4}
ipmcNewCfgStaticRoutePMrtrBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Primary Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Primary Mrouter Port is added
0 - The represented Primary Mrouter Port is not added"
::= { ipmcNewCfgStaticRouteEntry 5}
ipmcNewCfgStaticRouteBMrtrBmap OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Backup Mrouter ports that are added to this IPMC port bitmap.
The selected ports are presented in a bitmap format
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Port 9
|| ||
|| ||___ Port 8
|| |____ Port 7
|| . . .
||_________ Port 2
|__________ Port 1
where x : 1 - The represented Backup Mrouter Port is added
0 - The represented Backup Mrouter Port is not added"
::= { ipmcNewCfgStaticRouteEntry 6}
ipmcNewCfgStaticRouteAddPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf."
::= { ipmcNewCfgStaticRouteEntry 7}
ipmcNewCfgStaticRouteRemPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be removed from this IPMC route.
Not allowed to delete ports that are part of trunks."
::= { ipmcNewCfgStaticRouteEntry 17}
ipmcNewCfgStaticRouteTrunks OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The trunk list for this IPMC route. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to ipmc
0 - The represented trunk does not belong to ipmc"
::= { ipmcNewCfgStaticRouteEntry 8 }
ipmcNewCfgStaticRouteAddTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trunk group number to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf."
::= { ipmcNewCfgStaticRouteEntry 9 }
ipmcNewCfgStaticRouteRemTrunk OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The trunk group number to be removed from this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read."
::= { ipmcNewCfgStaticRouteEntry 10 }
ipmcNewCfgStaticRouteAdminkeys OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The LACP port adminkeys list for to this IPMC route.
Adminkeys on five positions alligned to right, separated by commas"
::= { ipmcNewCfgStaticRouteEntry 11 }
ipmcNewCfgStaticRouteAddAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LACP port adminkey to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf."
::= { ipmcNewCfgStaticRouteEntry 12 }
ipmcNewCfgStaticRouteRemAdminkey OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LACP port adminkey to be removed from this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
A '0' value is returned when read."
::= { ipmcNewCfgStaticRouteEntry 13 }
ipmcNewCfgStaticRoutePortInfo OBJECT-TYPE
SYNTAX INTEGER {
host(1),
primary(2),
backup(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Port/Trunk/Adminkey Information to be added to
this IPMC route (host/primary/backup). Use it only
right after you set a new port/trunk/adminkey to
specify its type.
Warning: If snooping is enabled, primary/backup
routes will be converted to host."
::= { ipmcNewCfgStaticRouteEntry 14 }
ipmcNewCfgStaticRouteDelete OBJECT-TYPE
SYNTAX INTEGER {
delete(2),
deletehost(3),
deleteprimary(4),
deletebackup(5),
no(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete this route."
::= { ipmcNewCfgStaticRouteEntry 16}
ipmcStaticRouteClearAll OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to clear(2),clears all static IPMC routes. Otherwhise nothing
is done."
::= { ipmcStaticRouteCfg 4 }
ipmcNewCfgStaticRouteAddPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be added to this IPMC route.
Next step is using ipmcNewCfgStaticRoutePortInfo leaf
in order to make the actual change.
When creating a new route, be sure to set Destination IP
and Vlan Id before using this leaf."
::= { ipmcNewCfgStaticRouteEntry 18}
ipmcNewCfgStaticRouteRemPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port to be removed from this IPMC route.
Not allowed to delete ports that are part of trunks."
::= { ipmcNewCfgStaticRouteEntry 19}
--
-- IPv6 Default Gateway Configuration
--
ipGatewayIpv6TableMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the IPv6 gateway table."
::= { ipGatewayIpv6Cfg 1 }
ipCurCfgGwIpv6Table OBJECT-TYPE
SYNTAX SEQUENCE OF IpCurCfgGwIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IPv6 gateways in the Current configuration Block."
::= { ipGatewayIpv6Cfg 2 }
ipCurCfgGwIpv6Entry OBJECT-TYPE
SYNTAX IpCurCfgGwIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ipv6 gateway table"
INDEX { ipCurCfgGwIpv6Index }
::= { ipCurCfgGwIpv6Table 1 }
IpCurCfgGwIpv6Entry ::= SEQUENCE {
ipCurCfgGwIpv6Index Integer32,
ipCurCfgGwIpv6Addr DisplayString,
ipCurCfgGwIpv6State INTEGER
}
ipCurCfgGwIpv6Index OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 gateway number for which the information is related."
::= { ipCurCfgGwIpv6Entry 1}
ipCurCfgGwIpv6Addr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 address of the gateway. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx or
fe80:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx%interface"
::= { ipCurCfgGwIpv6Entry 2 }
ipCurCfgGwIpv6State OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the default IPv6 gateway."
::= { ipCurCfgGwIpv6Entry 3 }
ipNewCfgGwIpv6Table OBJECT-TYPE
SYNTAX SEQUENCE OF IpNewCfgGwIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IPv6 gateways in the new configuration block."
::= { ipGatewayIpv6Cfg 3 }
ipNewCfgGwIpv6Entry OBJECT-TYPE
SYNTAX IpNewCfgGwIpv6Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the Ipv6 gateway table"
INDEX { ipNewCfgGwIpv6Index }
::= { ipNewCfgGwIpv6Table 1 }
IpNewCfgGwIpv6Entry ::= SEQUENCE {
ipNewCfgGwIpv6Index Integer32,
ipNewCfgGwIpv6Addr DisplayString,
ipNewCfgGwIpv6State INTEGER,
ipNewCfgGwIpv6Delete INTEGER
}
ipNewCfgGwIpv6Index OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 gateway number for which the information is related."
::= { ipNewCfgGwIpv6Entry 1}
ipNewCfgGwIpv6Addr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IPv6 address of the gateway. Address should be 4-byte
hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { ipNewCfgGwIpv6Entry 2 }
ipNewCfgGwIpv6State OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of the default IPv6 gateway."
::= { ipNewCfgGwIpv6Entry 3 }
ipNewCfgGwIpv6Delete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When set to the value of 2 (delete), the default gw is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the default IPv6 gw."
::= { ipNewCfgGwIpv6Entry 4 }
-- Statistics
-- IP statistics
ipStatsInReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InReceive"
::= { ipStats 1 }
ipStatsInHdrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InHdrError"
::= { ipStats 2 }
ipStatsInAddrErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InAddrErrors"
::= { ipStats 3 }
ipStatsInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InUnknownProtos"
::= { ipStats 5 }
ipStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InDiscards"
::= { ipStats 6 }
ipStatsInDelivers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip InDelivers"
::= { ipStats 7 }
ipStatsOutRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip OutRequests"
::= { ipStats 8 }
ipStatsOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip OutDiscards"
::= { ipStats 9 }
ipStatsDefaultTTL OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip DefaultTTL"
::= { ipStats 19 }
--SNMP statistics
nsnmpInPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInPkts"
::= { snmpStats 1 }
nsnmpInBadCommunityNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInBadCommunityNames"
::= { snmpStats 2 }
nsnmpInASNParseErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInASNParseErrs"
::= { snmpStats 3 }
nsnmpOutPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutPkts"
::= { snmpStats 4 }
nsnmpInTooBigs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInTooBigs"
::= { snmpStats 5 }
nsnmpInBadValues OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInBadValues"
::= { snmpStats 6 }
nsnmpInGenErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInGenErrs"
::= { snmpStats 7 }
nsnmpInTotalSetVars OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInTotalSetVars"
::= { snmpStats 8 }
nsnmpInGetNexts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInGetNexts"
::= { snmpStats 9 }
nsnmpInGetResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInGetResponses"
::= { snmpStats 10 }
nsnmpOutTooBigs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutTooBigs"
::= { snmpStats 11 }
nsnmpOutBadValues OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutBadValues"
::= { snmpStats 12 }
nsnmpOutGenErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutGenErrs"
::= { snmpStats 13 }
nsnmpOutGetNexts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutGetNexts"
::= { snmpStats 14 }
nsnmpOutGetResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutGetResponses"
::= { snmpStats 15 }
nsnmpSilentDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpSilentDrops"
::= { snmpStats 16 }
nsnmpInBadVersions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInBadVersions"
::= { snmpStats 17 }
nsnmpInBadCommunityUses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInBadCommunityUses"
::= { snmpStats 18 }
nsnmpEnableAuthTraps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpEnableAuthTraps"
::= { snmpStats 19 }
nsnmpInBadTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInBadTypes"
::= { snmpStats 20 }
nsnmpInNoSuchNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInNoSuchNames"
::= { snmpStats 21 }
nsnmpInReadOnlys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInReadOnlys"
::= { snmpStats 22 }
nsnmpInTotalReqVars OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInTotalReqVars"
::= { snmpStats 23 }
nsnmpInGetRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInGetRequests"
::= { snmpStats 24 }
nsnmpInSetRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInSetRequests"
::= { snmpStats 25 }
nsnmpInTraps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpInTraps"
::= { snmpStats 26 }
nsnmpOutNoSuchNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutNoSuchNames"
::= { snmpStats 27 }
nsnmpOutReadOnlys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutReadOnlys"
::= { snmpStats 28 }
nsnmpOutGetRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutGetRequests"
::= { snmpStats 29 }
nsnmpOutSetRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutSetRequests"
::= { snmpStats 30 }
nsnmpOutTraps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpOutTraps"
::= { snmpStats 31 }
nsnmpProxyDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmpProxyDrops"
::= { snmpStats 32 }
-- ICMP statistics
icmpStatsInMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InMsgs"
::= { icmpStats 1 }
icmpStatsInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InErrors"
::= { icmpStats 2 }
icmpStatsInDestUnreachs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InDestUnreachs"
::= { icmpStats 3 }
icmpStatsInTimeExcds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InTimeExcds"
::= { icmpStats 4 }
icmpStatsInParmProbs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InParmProbs"
::= { icmpStats 5 }
icmpStatsInSrcQuenchs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InSrcQuenchs"
::= { icmpStats 6 }
icmpStatsInRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InRedirects"
::= { icmpStats 7 }
icmpStatsInEchos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InEchos"
::= { icmpStats 8 }
icmpStatsInEchoReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InEchoReps"
::= { icmpStats 9 }
icmpStatsInTimestamps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InTimestamps"
::= { icmpStats 10 }
icmpStatsInTimestampReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InTimestampReps"
::= { icmpStats 11 }
icmpStatsInAddrMasks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InAddrMasks"
::= { icmpStats 12 }
icmpStatsInAddrMaskReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp InAddrMaskReps"
::= { icmpStats 13 }
icmpStatsOutMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutMsgs"
::= { icmpStats 14 }
icmpStatsOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutErrors"
::= { icmpStats 15 }
icmpStatsOutDestUnreachs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutDestUnreachs"
::= { icmpStats 16 }
icmpStatsOutTimeExcds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutTimeExcds"
::= { icmpStats 17 }
icmpStatsOutParmProbs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutParmProbs"
::= { icmpStats 18 }
icmpStatsOutSrcQuenchs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutSrcQuenchs"
::= { icmpStats 19 }
icmpStatsOutRedirects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutRedirects"
::= { icmpStats 20 }
icmpStatsOutEchos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutEchos"
::= { icmpStats 21 }
icmpStatsOutEchoReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutEchoReps"
::= { icmpStats 22 }
icmpStatsOutTimestamps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutTimestamps"
::= { icmpStats 23 }
icmpStatsOutTimestampReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutTimestampReps"
::= { icmpStats 24 }
icmpStatsOutAddrMasks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutAddrMasks"
::= { icmpStats 25 }
icmpStatsOutAddrMaskReps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"icmp OutAddrMaskReps"
::= { icmpStats 26 }
-- TCP statistics
tcpStatsRtoAlgorithm OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp RtoAlgorithm"
::= { tcpStats 1 }
tcpStatsRtoMin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp RtoMin"
::= { tcpStats 2 }
tcpStatsRtoMax OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp RtoMax"
::= { tcpStats 3 }
tcpStatsMaxConn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp MaxConn"
::= { tcpStats 4 }
tcpStatsActiveOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp ActiveOpens"
::= { tcpStats 5 }
tcpStatsPassiveOpens OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp PassiveOpens"
::= { tcpStats 6 }
tcpStatsAttemptFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp AttemptFails"
::= { tcpStats 7 }
tcpStatsEstabResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp EstabResets"
::= { tcpStats 8 }
tcpStatsInSegs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp InSegs"
::= { tcpStats 9 }
tcpStatsOutSegs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp OutSegs"
::= { tcpStats 10 }
tcpStatsRetransSegs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp RetransSegs"
::= { tcpStats 11 }
tcpStatsInErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp InErrs"
::= { tcpStats 12 }
tcpStatsCurrEstab OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp CurrEstab"
::= { tcpStats 13 }
tcpStatsCurrConn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp CurrConn"
::= { tcpStats 14 }
tcpStatsOutRsts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"tcp OutRsts"
::= { tcpStats 15 }
-- UDP statistics
udpStatsInDatagrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"udp InDatagrams"
::= { udpStats 1 }
udpStatsOutDatagrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"udp OutDatagrams"
::= { udpStats 2 }
udpStatsInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"udp InErrors"
::= { udpStats 3 }
udpStatsNoPorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"udp NoPorts"
::= { udpStats 4 }
-- ARP Statistics Group
arpStatEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of ARP entries."
::= { arpStats 1 }
arpStatHighWater OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of ARP entries."
::= { arpStats 2 }
arpStatMaxEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of ARP entries."
::= { arpStats 3 }
mgmtArpStatEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of ARP entries on management port."
::= { arpStats 4 }
mgmtArpStatHighWater OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of ARP entries on management port."
::= { arpStats 5 }
-- ROUTE Statistics Group
routeStatEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of IP routes."
::= { routeStats 1 }
routeStatHighWater OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of IP routes."
::= { routeStats 2 }
routeStatStaticEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current static routes."
::= { routeStats 3 }
routeStatOspfEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current OSPF routes."
::= { routeStats 5 }
routeStatMaxEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of IP routes."
::= { routeStats 7 }
routeStatEcmpMaxEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of ECMP routes."
::= { routeStats 8 }
routeStatEcmpMaxStaticEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of static ECMP routes."
::= { routeStats 9 }
routeStatEcmpPathsEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of routes with ECMP paths."
::= { routeStats 11 }
-- DNS Statistics
dnsStatInGoodDnsRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DNS request packets which are received."
::= { dnsStats 1 }
dnsStatInBadDnsRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DNS request packets received that were dropped."
::= { dnsStats 2 }
dnsStatOutDnsRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DNS request packets that have been transmitted."
::= { dnsStats 3 }
-- Clear Statistics for ip and ip interface
ipClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(2) results in clearing the IP statistics."
::= { clearStats 1 }
tcpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the TCP statistics."
::= { clearStats 5 }
udpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the UDP statistics."
::= { clearStats 6 }
dnsClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the DNS statistics."
::= { clearStats 7 }
icmpClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the ICMP statistics."
::= { clearStats 9 }
ipv6ClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the IPv6 statistics."
::= { clearStats 13 }
ipv6ClearIcmpStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the ICMP6 statistics."
::= { clearStats 14 }
ipv6ClearUdpStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the UDP6 statistics."
::= { clearStats 15 }
-- IGMP Snooping statistics
igmpSnoopStats OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics for IGMP Snooping."
::= { igmpStats 1 }
igmpSnoopStatsEntry OBJECT-TYPE
SYNTAX IgmpSnoopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics for IGMP Snooping."
INDEX { igmpSnoopVlanIndex }
::= { igmpSnoopStats 1 }
IgmpSnoopStatsEntry ::= SEQUENCE {
igmpSnoopVlanIndex INTEGER,
rxIgmpValidPkts Counter32,
rxIgmpInvalidPkts Counter32,
rxIgmpGenQueries Counter32,
rxIgmpGrpSpecificQueries Counter32,
rxIgmpLeaves Counter32,
rxIgmpDiscardPkts Counter32,
rxIgmpReports Counter32,
rxIgmpPimHellos Counter32,
txIgmpGenQueries Counter32,
txIgmpGrpSpecificQueries Counter32,
txIgmpReports Counter32,
igmpClearVlanStats INTEGER,
txIgmpLeaves Counter32,
rxIgmpGroupSourceSpecificQueries Counter32,
rxIgmpV3CurrentStateRecords Counter32,
rxIgmpV3SourceListChangeRecords Counter32,
rxIgmpV3FilterChangeRecords Counter32
}
igmpSnoopVlanIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the VLAN for which these statistics apply."
::= { igmpSnoopStatsEntry 1 }
rxIgmpValidPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of valid IGMP packets received
on this VLAN."
::= { igmpSnoopStatsEntry 2 }
rxIgmpInvalidPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid IGMP packets received
on this VLAN."
::= { igmpSnoopStatsEntry 3 }
rxIgmpGenQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP General Query packets received
on this VLAN."
::= { igmpSnoopStatsEntry 4 }
rxIgmpGrpSpecificQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Group Specific Query packets received
on this VLAN."
::= { igmpSnoopStatsEntry 5 }
rxIgmpLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Leave packets received
on this VLAN."
::= { igmpSnoopStatsEntry 6 }
rxIgmpReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Report packets received
on this VLAN."
::= { igmpSnoopStatsEntry 7 }
txIgmpGrpSpecificQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Group Specific Query packets
transmitted on this VLAN."
::= { igmpSnoopStatsEntry 8 }
txIgmpReports OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Report packets transmitted
on this VLAN."
::= { igmpSnoopStatsEntry 9 }
txIgmpLeaves OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Leave packets transmitted
on this VLAN."
::= { igmpSnoopStatsEntry 10 }
rxIgmpGroupSourceSpecificQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Group Source Specific (GSSQ) Queries received
on this VLAN."
::= { igmpSnoopStatsEntry 11 }
rxIgmpV3CurrentStateRecords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Current State Records (CSRs) received
on this VLAN."
::= { igmpSnoopStatsEntry 12 }
rxIgmpV3SourceListChangeRecords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Source List Change Records (SLCRs) received
on this VLAN."
::= { igmpSnoopStatsEntry 13 }
rxIgmpV3FilterChangeRecords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP Filter Mode Change Records (FMCRs) received
on this VLAN."
::= { igmpSnoopStatsEntry 14 }
txIgmpGenQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP General Query packets send
on this VLAN."
::= { igmpSnoopStatsEntry 16 }
rxIgmpDiscardPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP packets discarded
on this VLAN."
::= { igmpSnoopStatsEntry 17 }
rxIgmpPimHellos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Pim Hello packets received
on this VLAN."
::= { igmpSnoopStatsEntry 18 }
igmpClearVlanStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the statistics for this
snooping VLAN."
::= { igmpSnoopStatsEntry 19 }
igmpClearAllStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
ok(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to clear(1) results in clearing the IGMP statistics."
::= { igmpStats 2 }
igmpStatsTotalIgmpGroups OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IGMP groups."
::= { igmpStats 3 }
igmpStatsTotalIpmcGroups OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IPMC groups."
::= { igmpStats 4 }
ipv6InReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of input datagrams received from
interfaces, including those received in error."
::= { ipv6Stats 1 }
ipv6InMcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of multicast packets received from
interfaces, including those received in error."
::= { ipv6Stats 2 }
ipv6InDelivers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams given to upper layer - ICMP/UDP"
::= { ipv6Stats 3 }
ipv6InDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams discarded despite no errors"
::= { ipv6Stats 4 }
ipv6InHdrerrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams with error in IPv6/Option headers"
::= { ipv6Stats 5 }
ipv6InAddrerrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams with error in destination address"
::= { ipv6Stats 6 }
ipv6InUnkprots OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams with unknown/unsupported protocol"
::= { ipv6Stats 7 }
ipv6InTruncs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams with insufficient data"
::= { ipv6Stats 8 }
ipv6OutMcasts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total sent multicast pkts"
::= { ipv6Stats 10 }
ipv6ForwDgrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams attempted to be forwarded"
::= { ipv6Stats 11 }
ipv6TooBigerrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams which could not be forwarded
as their size exceeds (Path) MTU"
::= { ipv6Stats 12 }
ipv6OutReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams attempted to be sent"
::= { ipv6Stats 13 }
ipv6OutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total outgoing Datagrams discarded despite no errors"
::= { ipv6Stats 14 }
ipv6OutNorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams discarded due to no routes"
::= { ipv6Stats 15 }
ipv6Reasmreqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams needing reassembly"
::= { ipv6Stats 16 }
ipv6Reasmoks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams successfully reassembled"
::= { ipv6Stats 17 }
ipv6Reasmfails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams for witch reassembly failured"
::= { ipv6Stats 18 }
ipv6Fragoks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams successfully fragmented"
::= { ipv6Stats 19 }
ipv6Fragfails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total datagrams for witch fragmentation failured"
::= { ipv6Stats 20 }
ipv6Fragcreates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of fragments created"
::= { ipv6Stats 21 }
ipv6InNsols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received Neighbor Solicitations"
::= { ipv6Stats 22 }
ipv6InNadvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received Neighbor Advertisements"
::= { ipv6Stats 23 }
ipv6InRoutsols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received Router Solicitations"
::= { ipv6Stats 25 }
ipv6InRoutadvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received Router Advertisements"
::= { ipv6Stats 26 }
ipv6InRoutRedirs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of received Router Redirect messages"
::= { ipv6Stats 27 }
ipv6OutNsols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sent Neighbor Solicitations"
::= { ipv6Stats 28 }
ipv6OutNadvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sent Neighbor Advertisements"
::= { ipv6Stats 29 }
ipv6OutRoutadvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sent Router Advertisements"
::= { ipv6Stats 30 }
ipv6OutRedirs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sent Redirects"
::= { ipv6Stats 31 }
ipv6OutRoutSols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of sent Router Solicitations"
::= { ipv6Stats 32 }
-- Please see tIp6If structure: u4RaSchedTime and u4RaSentTime are interface
-- parameters. They are not part of interface statistics (tIp6IfStats stats;).
-- ipv6RaSchedTime OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Next multicast Router Advertisement scheduled time"
-- ::= { ipv6Stats 36 }
-- ipv6RaSentTime OBJECT-TYPE
-- SYNTAX Counter32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Last Router Advertisement sent time"
-- ::= { ipv6Stats 37 }
ipv6icmpInMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ICMP messages received."
::= { ipv6Stats 39 }
ipv6icmpInErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ICMP messages attempted to send."
::= { ipv6Stats 40 }
ipv6icmpInBadcode OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ICMP messages in bad code."
::= { ipv6Stats 41 }
ipv6icmpInToobig OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP too big messages received."
::= { ipv6Stats 42 }
ipv6icmpInDstUnreach OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Destination Unreachable messages received."
::= { ipv6Stats 43 }
ipv6icmpInTmexceeded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Time Exceeded messages received."
::= { ipv6Stats 44 }
ipv6icmpInParamprob OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Parameter Problem messages received."
::= { ipv6Stats 45 }
ipv6icmpInEchoReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo request messages received."
::= { ipv6Stats 46 }
ipv6icmpInEchoResp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo Reply messages received."
::= { ipv6Stats 47 }
ipv6icmpOutMsgs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ICMP messages which this entity
attempted to send."
::= { ipv6Stats 48 }
ipv6icmpOutErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP messages which this entity did not
send due to problems discovered within ICMP
such as a lack of buffers."
::= { ipv6Stats 49 }
ipv6icmpOutDstUnreach OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Destination Unreachable messages sent."
::= { ipv6Stats 50 }
ipv6icmpOutToobig OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP too big messages sent."
::= { ipv6Stats 51 }
ipv6icmpOutTmexceeded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Time Exceeded messages sent."
::= { ipv6Stats 52 }
ipv6icmpOutParamprob OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Parameter Problem messages sent."
::= { ipv6Stats 53 }
ipv6icmpOutEchoReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo request messages sent."
::= { ipv6Stats 54 }
ipv6icmpOutEchoResp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Echo Reply messages sent."
::= { ipv6Stats 55 }
ipv6icmpInRouterSol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP router solicitations received."
::= { ipv6Stats 56 }
ipv6icmpInRouterAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP router advertisements received."
::= { ipv6Stats 57 }
ipv6icmpInNeighSol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP neighbor solicitations received."
::= { ipv6Stats 58 }
ipv6icmpInNeighAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP neighbor advertisements received."
::= { ipv6Stats 59 }
ipv6icmpInRedir OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Redirect messages received."
::= { ipv6Stats 60 }
ipv6icmpOutRouterSol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP router solicitations sent."
::= { ipv6Stats 61 }
ipv6icmpOutRouterAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP router advertisements sent."
::= { ipv6Stats 62 }
ipv6icmpOutNeighSol OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP neighbor solicitations sent."
::= { ipv6Stats 63 }
ipv6icmpOutNeighAdv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP neighbor advertisements sent."
::= { ipv6Stats 64 }
ipv6icmpOutRedir OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP Redirect messages sent."
::= { ipv6Stats 65 }
ipv6udpInDgrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of UDP received datagrams."
::= { ipv6Stats 66 }
ipv6udpInErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of UDP error encountered during
processing of packet."
::= { ipv6Stats 67 }
ipv6udpOutDgrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of UDP datagrams passed to IP6 layer."
::= { ipv6Stats 68 }
ipv6udpNumPorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of UDP ports that are currently open."
::= { ipv6Stats 69 }
ipv6icmpInAdminProhib OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received Destination Unreachable
ICMP packets."
::= { ipv6Stats 70 }
ipv6icmpOutAdminProhib OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sent Destination Unreachable
ICMP packets."
::= { ipv6Stats 71 }
ipIntfInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IP interface information."
::= {ipIntfInfo 1 }
intfInfoEntry OBJECT-TYPE
SYNTAX IntfInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in IP interface information table."
INDEX { intfInfoIndex }
::= { ipIntfInfoTable 1 }
IntfInfoEntry ::= SEQUENCE {
intfInfoIndex Integer32,
intfInfoAddr DisplayString,
intfInfoNetMask DisplayString,
intfInfoBcastAddr DisplayString,
intfInfoVlan Integer32,
intfInfoStatus INTEGER
}
intfInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the information is related."
::= { intfInfoEntry 1}
intfInfoAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the interface."
::= { intfInfoEntry 3 }
intfInfoNetMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subnet mask of the interface."
::= { intfInfoEntry 4 }
intfInfoBcastAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The broadcast address of the interface."
::= { intfInfoEntry 5 }
intfInfoVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN number for this interface."
::= { intfInfoEntry 6 }
intfInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the interface."
::= { intfInfoEntry 7 }
-- Run Time ARP Table
-- Run Time ARP Table
arpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgArpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ARP entries."
::= { arpInfo 1 }
arpInfoEntry OBJECT-TYPE
SYNTAX AgArpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the ARP table"
INDEX { arpInfoDestIp }
::= { arpInfoTable 1 }
AgArpInfoEntry ::= SEQUENCE {
arpInfoDestIp IpAddress,
arpInfoMacAddr PhysAddress,
arpInfoVLAN Integer32,
arpInfoSrcPortIndex PortNumber
,arpInfoFlag INTEGER
,arpInfoSrcPortAlias DisplayString
}
arpInfoDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of the ARP entry."
::= { arpInfoEntry 1 }
arpInfoMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the ARP entry."
::= { arpInfoEntry 2 }
arpInfoVLAN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier for the ARP entry."
::= { arpInfoEntry 3 }
arpInfoSrcPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number on which this entry's equivalence is effective."
::= { arpInfoEntry 4 }
arpInfoFlag OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
unresolved(2),
permanent(3),
indirect(4),
layer4(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag associated with this ARP entry."
::= { arpInfoEntry 6 }
arpInfoSrcPortAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alias for port number."
::= { arpInfoEntry 8 }
arpCacheClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the ARP cache."
::= { arpInfo 2 }
arpMgmtInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgArpMgmtInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Mgmt ARP entries."
::= { arpInfo 3 }
arpMgmtInfoEntry OBJECT-TYPE
SYNTAX AgArpMgmtInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the ARP table"
INDEX { arpMgmtInfoDestIp }
::= { arpMgmtInfoTable 1 }
AgArpMgmtInfoEntry ::= SEQUENCE {
arpMgmtInfoDestIp IpAddress,
arpMgmtInfoMacAddr PhysAddress,
arpMgmtInfoVLAN Integer32,
arpMgmtInfoSrcPortIndex PortNumber,
arpMgmtInfoFlag INTEGER
,arpMgmtInfoSrcPortAlias DisplayString
}
arpMgmtInfoDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of the ARP entry."
::= { arpMgmtInfoEntry 1 }
arpMgmtInfoMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for the ARP entry."
::= { arpMgmtInfoEntry 2 }
arpMgmtInfoVLAN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN identifier for the ARP entry."
::= { arpMgmtInfoEntry 3 }
arpMgmtInfoSrcPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port number on which this entry's equivalence is effective."
::= { arpMgmtInfoEntry 4 }
arpMgmtInfoFlag OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
unresolved(2),
permanent(3),
indirect(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag associated with this ARP entry."
::= { arpMgmtInfoEntry 5 }
arpMgmtInfoSrcPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alias for port number."
::= { arpMgmtInfoEntry 6}
ipMgmtRouteInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMgmtRouteInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of run-time IP routes."
::= { ipRoutingInfo 3 }
ipMgmtRouteInfoEntry OBJECT-TYPE
SYNTAX IpMgmtRouteInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the run-time IP route table"
INDEX { ipMgmtRouteInfoIndx }
::= { ipMgmtRouteInfoTable 1 }
IpMgmtRouteInfoEntry ::= SEQUENCE {
ipMgmtRouteInfoIndx Integer32,
ipMgmtRouteInfoDestIp IpAddress,
ipMgmtRouteInfoMask IpAddress,
ipMgmtRouteInfoGateway IpAddress,
ipMgmtRouteInfoTag INTEGER,
ipMgmtRouteInfoType INTEGER,
ipMgmtRouteInfoInterface Integer32,
ipMgmtRouteInfoGateway1 IpAddress,
ipMgmtRouteInfoGateway2 IpAddress,
ipMgmtRouteInfoMetric Integer32
}
ipMgmtRouteInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this route table."
::= { ipMgmtRouteInfoEntry 1 }
ipMgmtRouteInfoDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipMgmtRouteInfoEntry 2 }
ipMgmtRouteInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP mask of this route."
::= { ipMgmtRouteInfoEntry 3 }
ipMgmtRouteInfoGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipMgmtRouteInfoEntry 4 }
ipMgmtRouteInfoTag OBJECT-TYPE
SYNTAX INTEGER {
fixed(1),
static(2),
addr(3),
rip(4),
broadcast(5),
martian(6),
multicast(7),
vip(8),
bgp(9),
ospf(10),
none(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tag-type for this route."
::= { ipMgmtRouteInfoEntry 5 }
ipMgmtRouteInfoType OBJECT-TYPE
SYNTAX INTEGER {
indirect(1),
direct(2),
local(3),
broadcast(4),
martian(5),
multicast(6),
other(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the route."
::= { ipMgmtRouteInfoEntry 6 }
ipMgmtRouteInfoInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the destination address is applicable."
::= { ipMgmtRouteInfoEntry 7 }
ipMgmtRouteInfoGateway1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipMgmtRouteInfoEntry 8 }
ipMgmtRouteInfoGateway2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipMgmtRouteInfoEntry 9 }
ipMgmtRouteInfoMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Metric for this route."
::= { ipMgmtRouteInfoEntry 10 }
ipDataRouteInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpDataRouteInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of run-time IP routes."
::= { ipRoutingInfo 1 }
ipDataRouteInfoEntry OBJECT-TYPE
SYNTAX IpDataRouteInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the run-time IP route table"
INDEX { ipDataRouteInfoIndx }
::= { ipDataRouteInfoTable 1 }
IpDataRouteInfoEntry ::= SEQUENCE {
ipDataRouteInfoIndx Integer32,
ipDataRouteInfoDestIp IpAddress,
ipDataRouteInfoMask IpAddress,
ipDataRouteInfoGateway IpAddress,
ipDataRouteInfoTag INTEGER,
ipDataRouteInfoType INTEGER,
ipDataRouteInfoInterface Integer32,
ipDataRouteInfoGateway1 IpAddress,
ipDataRouteInfoGateway2 IpAddress,
ipDataRouteInfoMetric Integer32
}
ipDataRouteInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this route table."
::= { ipDataRouteInfoEntry 1 }
ipDataRouteInfoDestIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ipDataRouteInfoEntry 2 }
ipDataRouteInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP mask of this route."
::= { ipDataRouteInfoEntry 3 }
ipDataRouteInfoGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipDataRouteInfoEntry 4 }
ipDataRouteInfoTag OBJECT-TYPE
SYNTAX INTEGER {
fixed(1),
static(2),
addr(3),
rip(4),
broadcast(5),
martian(6),
multicast(7),
vip(8),
bgp(9),
ospf(10),
none(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tag-type for this route."
::= { ipDataRouteInfoEntry 5 }
ipDataRouteInfoType OBJECT-TYPE
SYNTAX INTEGER {
indirect(1),
direct(2),
local(3),
broadcast(4),
martian(5),
multicast(6),
other(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the route."
::= { ipDataRouteInfoEntry 6 }
ipDataRouteInfoInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface number for which the destination address is applicable.
Loopback interfaces are numbered starting with maximum allowed
IP interfaces +1."
::= { ipDataRouteInfoEntry 7 }
ipDataRouteInfoGateway1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipDataRouteInfoEntry 8 }
ipDataRouteInfoGateway2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipDataRouteInfoEntry 9 }
ipDataRouteInfoMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Metric for this route."
::= { ipDataRouteInfoEntry 10 }
routeTableClear OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the route table."
::= { ipRoutingInfo 2 }
ipRouteEcmpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpRouteEcmpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of run-time IP routes."
::= { ipEcmpRoutingInfo 1 }
ipRouteEcmpInfoEntry OBJECT-TYPE
SYNTAX IpRouteEcmpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the run-time IP route table"
INDEX { ipRouteEcmpInfoDestIndx, ipRouteEcmpInfoGwIndx }
::= { ipRouteEcmpInfoTable 1 }
IpRouteEcmpInfoEntry ::= SEQUENCE {
ipRouteEcmpInfoDestIndx Integer32,
ipRouteEcmpInfoGwIndx Integer32,
ipRouteEcmpInfoDest IpAddress,
ipRouteEcmpInfoMask IpAddress,
ipRouteEcmpInfoGateway IpAddress,
ipRouteEcmpInfoInterface Integer32,
ipRouteEcmpInfoGwStatus INTEGER
}
ipRouteEcmpInfoDestIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of unique destinations IP."
::= { ipRouteEcmpInfoEntry 1 }
ipRouteEcmpInfoGwIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the gateway per destination."
::= { ipRouteEcmpInfoEntry 2 }
ipRouteEcmpInfoDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP of this route."
::= { ipRouteEcmpInfoEntry 3 }
ipRouteEcmpInfoMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP mask of this route."
::= { ipRouteEcmpInfoEntry 4 }
ipRouteEcmpInfoGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next-hop router address for this route."
::= { ipRouteEcmpInfoEntry 5 }
ipRouteEcmpInfoInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface for the next-hop."
::= { ipRouteEcmpInfoEntry 6 }
ipRouteEcmpInfoGwStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Up/Down status of the gateway"
::= { ipRouteEcmpInfoEntry 7 }
ipEcmpHashSIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The SIP Address."
::= { ipEcmpHash 1 }
ipEcmpHashDIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DIP Address (enter 0 for SIP only)."
::= { ipEcmpHash 2 }
ipEcmpHashNumberPaths OBJECT-TYPE
SYNTAX INTEGER (2..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of ECMP paths."
::= { ipEcmpHash 3 }
ipEcmpHashRouteNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the hash algorithm.
For this to work the values for ipEcmpHashSIPAddr,
ipEcmpHashDIPAddr, ipEcmpHashNumberPaths must be set.
If the result is 0 ipEcmpHashNumberPaths is not correctly set."
::= { ipEcmpHash 4 }
-- Gateway Information
gatewayInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GatewayInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information for the default gateways."
::= { gatewayInfo 1 }
gatewayInfoEntry OBJECT-TYPE
SYNTAX GatewayInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the gateway information table"
INDEX { gatewayInfoIndex }
::= { gatewayInfoTable 1 }
GatewayInfoEntry ::= SEQUENCE {
gatewayInfoIndex Integer32,
gatewayInfoAddr IpAddress,
gatewayInfoStatus INTEGER
}
gatewayInfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gateway number for which the information is related."
::= { gatewayInfoEntry 1}
gatewayInfoAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the default gateway."
::= { gatewayInfoEntry 2 }
gatewayInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
failed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the default gateway."
::= { gatewayInfoEntry 4 }
-- igmp snooping info table
igmpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP group membership information."
::= { igmpInfo 1 }
igmpInfoEntry OBJECT-TYPE
SYNTAX IgmpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IGMP group member ."
INDEX { igmpInfoIndex }
::= { igmpInfoTable 1 }
IgmpInfoEntry ::= SEQUENCE {
igmpInfoIndex INTEGER,
igmpInfoGroupId IpAddress,
igmpInfoVlanId INTEGER,
igmpInfoSrcTrunk Unsigned32,
igmpInfoSrcPortIndex PortNumber,
igmpInfoVersion INTEGER,
igmpInfoExpires DisplayString,
igmpInfoMode INTEGER,
igmpInfoSourceIp IpAddress,
igmpInfoFwd INTEGER,
igmpInfoGrpExpires DisplayString
,igmpInfoSrcPortAlias DisplayString
}
igmpInfoIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The igmp group number for which the IGMP info table is related."
::= { igmpInfoEntry 1}
igmpInfoGroupId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the IGMP group."
::= { igmpInfoEntry 2}
igmpInfoVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for this IGMP group."
::= { igmpInfoEntry 3}
igmpInfoSrcTrunk OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The downstream trunk number."
::= { igmpInfoEntry 4}
igmpInfoSrcPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The downstream port number."
::= { igmpInfoEntry 5}
igmpInfoVersion OBJECT-TYPE
SYNTAX INTEGER {
v3(1),
v2(2),
v1(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Version of IGMP host."
::= { igmpInfoEntry 6}
igmpInfoExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration time for this host."
::= { igmpInfoEntry 7 }
igmpInfoMode OBJECT-TYPE
SYNTAX INTEGER {
exclude(1),
include(2),
na(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMPv3 filter-mode for this host.
Returned values:
exclude(1) - the IGMPv3 filter-mode is exclude.
include(2) - the IGMPv3 filter-mode is include.
na(3) - not applicable(v1 and v2)."
::= { igmpInfoEntry 8 }
igmpInfoSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address of the IGMP group."
::= { igmpInfoEntry 9 }
igmpInfoFwd OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IGMPv3 forwarding for this source/group IP for this host."
::= { igmpInfoEntry 10 }
igmpInfoGrpExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration time for the group."
::= { igmpInfoEntry 11 }
igmpInfoSrcPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The downstream port alias."
::= { igmpInfoEntry 12}
igmpMrtrInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpMrtrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of IGMP mrouters."
::= { igmpInfo 2 }
igmpMrtrInfoEntry OBJECT-TYPE
SYNTAX IgmpMrtrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an IGMP mrouter."
INDEX { igmpMrtrInfoIndex }
::= { igmpMrtrInfoTable 1 }
IgmpMrtrInfoEntry ::= SEQUENCE {
igmpMrtrInfoIndex INTEGER,
igmpMrtrInfoVlanId INTEGER,
igmpMrtrInfoPortId DisplayString,
igmpMrtrInfoVersion INTEGER,
igmpMrtrInfoExpires DisplayString,
igmpMrtrInfoMrt Integer32,
igmpMrtrInfoQrv INTEGER,
igmpMrtrInfoQqic INTEGER,
igmpMrtrInfoSrcIp IpAddress
,igmpMrtrInfoPortAlias DisplayString
}
igmpMrtrInfoIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mrouter number for which the IGMP mrouter info table is related."
::= { igmpMrtrInfoEntry 1}
igmpMrtrInfoVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID on which this IGMP mrouter is attached."
::= { igmpMrtrInfoEntry 2}
igmpMrtrInfoPortId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port/portchannel alias on which this IGMP mrouter is attached."
::= { igmpMrtrInfoEntry 3}
igmpMrtrInfoVersion OBJECT-TYPE
SYNTAX INTEGER {
v1(1),
v2(2),
v3(3),
pim(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of this IGMP mrouter."
::= { igmpMrtrInfoEntry 4}
igmpMrtrInfoExpires OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The expiration time for this mrouter."
::= { igmpMrtrInfoEntry 5 }
igmpMrtrInfoMrt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Query Response time of this IGMP mrouter."
::= { igmpMrtrInfoEntry 6 }
igmpMrtrInfoQrv OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Querier Robustness value of this IGMP mrouter."
::= { igmpMrtrInfoEntry 7 }
igmpMrtrInfoQqic OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Querier query interval code of this IGMP mrouter."
::= { igmpMrtrInfoEntry 8 }
igmpMrtrInfoSrcIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Source IP of this IGMP mrouter."
::= { igmpMrtrInfoEntry 10 }
igmpMrtrInfoPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port/portchannel alias on which this IGMP mrouter is attached."
::= { igmpMrtrInfoEntry 11}
igmpClearTables OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
clearGroups(1),
clearMrouters(2),
clearAll(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear the IGMP tables. When setting clearGroups(1), the dynamic
groups are removed, when setting clearMrouters(2), the mrouter tables
are removed and when setting clearAll(3), both the dynamic groups
and the mrouter tables are removed.
When read, ok(0) is always returned."
::= { igmpInfo 3 }
-- IPv6 Gateway Info
gatewayIPv6InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF GatewayIPv6InfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table containing information for the IPv6 default gateways."
::= { gatewayIPv6Info 1 }
gatewayIPv6InfoEntry OBJECT-TYPE
SYNTAX GatewayIPv6InfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the IPv6 gateway information table"
INDEX { ipGatewayIPv6InfoIndex }
::= { gatewayIPv6InfoTable 1 }
GatewayIPv6InfoEntry ::= SEQUENCE {
ipGatewayIPv6InfoIndex Integer32,
ipGatewayIPv6InfoAddr IpAddress,
ipGatewayIPv6InfoState INTEGER
}
ipGatewayIPv6InfoIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 gateway number for which the information is related."
::= { gatewayIPv6InfoEntry 1}
ipGatewayIPv6InfoAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address for the IPv6 default gateway."
::= { gatewayIPv6InfoEntry 2 }
ipGatewayIPv6InfoState OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state for the IPv6 Default Gateway."
::= { gatewayIPv6InfoEntry 3 }
-- nbrcache Info Table
-- ----------------------------------------------------------------------------
-- } INSERT: layer3
-- ----------------------------------------------------------------------------
traps OBJECT IDENTIFIER ::= { g7052-mgmt 7 }
-- ----------------------------------------------------------------------------
-- { INSERT: traps
-- ----------------------------------------------------------------------------
-- SECTION 2: Temporary Object Definitions Used In traps
swTrapDisplayString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Temporary string object used to store information being sent
in a Switch trap."
::= { traps 1000 }
-- SECTION 3: Trap Definitions
-- Many of the following traps include sysName, sysLocation and sysContact.
-- These variables are all defined in the rfc1213 MIB.
--
-- sysName is the administratively-assigned name for this managed node. By
-- convention, this is the node's fully-qualified domain name.
--
-- sysLocation is the physical location of this node (e.g., 'telephone closet,
-- 3rd floor').
--
-- sysContact is textual identification of the contact person for this managed
-- node, together with information on how to contact this person.
--
-- SNMP v3 traps should be defined here.
--
ibmSNMPv2Notifications OBJECT IDENTIFIER
::= { traps 0 }
--
-- SNMP v1 traps should be defined here.
--
swDefGwUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swDefGwUp trap signifies that the default gateway is alive.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway."
::= 2 -- 0x02
swDefGwDown TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swDefGwDown trap signifies that the default gateway is down.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway."
::= 3 -- 0x03
swDefGwInService TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swDefGwInService trap signifies that the default gateway is
up and in service.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway."
::= 4 -- 0x04
swDefGwNotInService TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
ipCurCfgGwIndex,
ipCurCfgGwAddr,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swDefGwNotInService trap signifies that the default gateway
is alive but not in service.
ipCurCfgGwIndex is the index of the Gateway in ipCurCfgGwTable.
The range for ipCurCfgGwIndex is from 1 to ipGatewayTableMax.
ipCurCfgGwAddr is the IP address of the default gateway."
::= 5 -- 0x05
swLoginFailure TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swLoginFailure trap signifies that someone failed to enter a
valid username/password combination.
swTrapDisplayString specifies whether the login attempt was from
CONSOLE or TELNET. In case of TELNET login it also specifies the IP
address of the host from which the attempt was made."
::= 19 -- 0x13
swTempExceedThreshold TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swTempExceedThreshold trap signifies that the
switch temperature has exceeded maximum safety limits."
::= 22 -- 0x16
swValidLogin TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swValidLogin trap signifies that a user login has occured."
::= 25 -- 0x19
swApplyComplete TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swApplyComplete signifies that new configuration
has been applied."
::= 27 -- 0x1B
swSaveComplete TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swApplyComplete signifies that new configuration
has been saved."
::= 28 -- 0x1C
swFwDownloadSucess TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swFwDownloadSuccess signifies that firmware
has been downloaded to [image1|image2|boot image]."
::= 29 -- 0x1D
swFwDownloadFailure TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swFwDownloadFailure signifies that firmware
downloaded failed to [image1|image2|boot image]."
::= 30 -- 0x1E
swStgNewRoot TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString, stgCurCfgIndex,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swStgNewRoot trap signifies that the bridge has become the new root of the STG."
--#SEVERITY INFORMATIONAL
::= 42 -- 0x2A
swCistNewRoot TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swCistNewRoot trap signifies that the bridge has become the new root of the CIST."
--#SEVERITY INFORMATIONAL
::= 43 -- 0x2B
swStgTopologyChanged TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString, stgCurCfgIndex,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swStgTopologyChanged trap signifies that there was a STG topology change."
--#SEVERITY INFORMATIONAL
::= 44 -- 0x2C
swCistTopologyChanged TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swCistTopologyChanged trap signifies that there was a CIST topology change."
--#SEVERITY INFORMATIONAL
::= 45 -- 0x2D
swHotlinksMasterUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swHotlinksMasterUp trap signifies that the Master interface is active."
::= 46 -- 0x2E
swHotlinksMasterDn TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swHotlinksMasterDn trap signifies that the Master interface is not active."
::= 47 -- 0x2F
swHotlinksBackupUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swHotlinksBackupUp trap signifies that the Backup interface is active."
::= 48 -- 0x30
swHotlinksBackupDn TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swHotlinksBackupDn trap signifies that the Backup interface is not active."
::= 49 -- 0x31
swHotlinksNone TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swHotlinksNone trap signifies that there are no active interfaces."
::= 50 -- 0x32
sfpInserted TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString, ifIndex,
sysName, sysLocation, sysContact }
DESCRIPTION "A sfpInserted trap signifies that a SFP is inserted."
--#SEVERITY INFORMATIONAL
::= 51 -- 0x33
sfpRemoved TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString, ifIndex,
sysName, sysLocation, sysContact }
DESCRIPTION "A sfpRemoved trap signifies that a SFP is removed."
--#SEVERITY INFORMATIONAL
::= 52 -- 0x34
swNTPSyncFailed TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swNTPSyncFailed trap signifies that sync with NTP server failed."
::= 61 -- 0x3D
swNTPUpdateClock TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swNTPUpdateClock trap signifies that update system clock with NTP server."
::= 62 -- 0x3E
swValidLogout TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A swValidLogout trap signifies that a user logout has occured."
::= 63 -- 0x3F
swECMPGatewayUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swECMPGatewayUp trap signifies that the ECMP gateway is up."
--#SEVERITY INFORMATIONAL
::= 65 -- 0x41
swECMPGatewayDown TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swECMPGatewayDown trap signifies that the ECMP gateway is down."
--#SEVERITY INFORMATIONAL
::= 66 -- 0x42
swTeamingCtrlUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swTeamingCtrlUp trap signifies that the teaming is up."
--#SEVERITY INFORMATIONAL
::= 67 -- 0x43
swTeamingCtrlDown TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swTeamingCtrlDown trap signifies that the teaming control is down."
--#SEVERITY INFORMATIONAL
::= 68 -- 0x44
swTeamingCtrlDownTearDownBlked TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swTeamingCtrlDownTearDownBlked trap signifies that the
teaming control is down but teardown is blocked."
--#SEVERITY INFORMATIONAL
::= 69 -- 0x45
swTeamingCtrlError TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swTeamingCtrlError trap signifies error, action is undefined."
--#SEVERITY INFORMATIONAL
::= 70 -- 0x46
swTempReturnThreshold TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swTempReturnThreshold trap signifies that the switch
temperature has returned below maximum safety limits."
--#SEVERITY INFORMATIONAL
::= 31 -- 0x1F
swLACPPortBlocked TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swLACPPortBlocked trap signifies that LACP is
operationally down on a port, and traffic is blocked on the port."
--#SEVERITY INFORMATIONAL
::= 71 -- 0x47
swLACPPortUnblocked TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation,
sysContact }
DESCRIPTION "A swLACPPortUnblocked trap signifies that LACP is
operationally up on a port, and traffic is no longer blocked on
the port."
--#SEVERITY INFORMATIONAL
::= 72 -- 0x48
swLFDPortErrdisabled TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "An swLFDPortErrdisabled trap signifies that a port is
error-disabled due to excessive link flaps."
--#SEVERITY INFORMATIONAL
::= 103 -- 0x67
swVlagInstanceUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagInstanceUp trap signifies that vLAG instance is
up identified in the trap message."
--#SEVERITY INFORMATIONAL
::= 106 -- 0x6A
swVlagInstanceRemoteUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagInstanceRemoteUp trap signifies that vLAG is down
but remote instance is Up."
--#SEVERITY INFORMATIONAL
::= 107 -- 0x6B
swVlagInstanceLocalUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagInstanceLocalUp trap signifies that vLAG is down
but local instance is Up."
--#SEVERITY INFORMATIONAL
::= 108 -- 0x6C
swVlagInstanceDown TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagInstanceDown trap signifies that vLAG instance is
down identified in the trap message."
--#SEVERITY INFORMATIONAL
::= 109 -- 0x6D
swVlagIslUp TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagIslUp trap signifies that connection between vLAG
switches is up."
--#SEVERITY INFORMATIONAL
::= 110 -- 0x6E
swVlagIslDown TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swVlagInstanceDown trap signifies that connection between
vLAG switches is down."
--#SEVERITY INFORMATIONAL
::= 111 -- 0x6F
sw8021x TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION
"A sw8021x trap is sent when dot1x feature is enabled."
::= 158 -- 0x9F
swDefAdminDisable TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swDefAdminDisable trap signifies that default admin account has been disabled."
::= 162 -- 0xA2
swAcntStrngPswdNotMet TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swAcntStrngPswdNotMet trap signifies that configured password does not match strong password complexity."
::= 163 -- 0xA3
swAcntLocked TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swAcntLocked trap signifies that account has been locked."
::= 164 -- 0xA4
swAcntUnlocked TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swAcntUnlocked trap signifies that account has been unlocked."
::= 165 -- 0xA5
swARPtablefull TRAP-TYPE
ENTERPRISE traps
VARIABLES { swTrapDisplayString,
sysName, sysLocation, sysContact }
DESCRIPTION "A swARPtablefull trap signifies that ARP table is full."
::= 184 -- 0xB8
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: traps
-- ----------------------------------------------------------------------------
qos OBJECT IDENTIFIER ::= { g7052-mgmt 8 }
-- ----------------------------------------------------------------------------
-- { INSERT: qos
-- ----------------------------------------------------------------------------
qosConfig OBJECT IDENTIFIER ::= { qos 1 }
--Only show these objects when we have it in the CLI
--qosStats OBJECT IDENTIFIER ::= { qos 2 }
--qosInfo OBJECT IDENTIFIER ::= { qos 3 }
--qosOper OBJECT IDENTIFIER ::= { qos 4 }
qos8021p OBJECT IDENTIFIER ::= { qosConfig 1 }
qosdscp OBJECT IDENTIFIER ::= { qosConfig 2 }
qoswredecn OBJECT IDENTIFIER ::= { qosConfig 3 }
-- QOS Configuration
qosCurCfgPortPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS Port Priority configuration."
::= { qos8021p 1 }
qosCurCfgPortPriorityEntry OBJECT-TYPE
SYNTAX QoSCurCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular QOS Port Priority configuration."
INDEX { qosCurCfgPortIndex }
::= { qosCurCfgPortPriorityTable 1 }
QoSCurCfgPortPriorityEntry ::= SEQUENCE {
qosCurCfgPortIndex PortNumber,
qosCurCfgPortPriority INTEGER
,qosCurCfgPortAlias DisplayString
}
qosCurCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Number"
::= { qosCurCfgPortPriorityEntry 1 }
qosCurCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Priority Should be between 0 and 7"
::= { qosCurCfgPortPriorityEntry 2 }
qosCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Alias"
::= { qosCurCfgPortPriorityEntry 3 }
qosNewCfgPortPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS Port Priority configuration."
::= { qos8021p 2 }
qosNewCfgPortPriorityEntry OBJECT-TYPE
SYNTAX QoSNewCfgPortPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular QOS Port Priority configuration."
INDEX { qosNewCfgPortIndex }
::= { qosNewCfgPortPriorityTable 1 }
QoSNewCfgPortPriorityEntry ::= SEQUENCE {
qosNewCfgPortIndex PortNumber,
qosNewCfgPortPriority INTEGER
,qosNewCfgPortAlias DisplayString
}
qosNewCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Number"
::= { qosNewCfgPortPriorityEntry 1 }
qosNewCfgPortPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch Port Priority Should be between 0 and 7"
::= { qosNewCfgPortPriorityEntry 2 }
qosNewCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Alias"
::= { qosNewCfgPortPriorityEntry 3 }
qosCurCfgPriorityCoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Frame Priority and COSq configuration."
::= { qos8021p 3 }
qosCurCfgPriorityCoSEntry OBJECT-TYPE
SYNTAX QoSCurCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Frame Priority and COSq configuration."
INDEX { qosCurCfgPriorityIndex }
::= { qosCurCfgPriorityCoSTable 1 }
QoSCurCfgPriorityCoSEntry ::= SEQUENCE {
qosCurCfgPriorityIndex INTEGER,
qosCurCfgPriorityCoSq INTEGER
}
qosCurCfgPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame priority Number"
::= { qosCurCfgPriorityCoSEntry 1 }
qosCurCfgPriorityCoSq OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoSq for a Frame Priority Should be between 0 and 7"
::= { qosCurCfgPriorityCoSEntry 2 }
qosNewCfgPriorityCoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Frame Priority and COSq configuration."
::= { qos8021p 4 }
qosNewCfgPriorityCoSEntry OBJECT-TYPE
SYNTAX QoSNewCfgPriorityCoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Frame Priority and COSq configuration."
INDEX { qosNewCfgPriorityIndex }
::= { qosNewCfgPriorityCoSTable 1 }
QoSNewCfgPriorityCoSEntry ::= SEQUENCE {
qosNewCfgPriorityIndex INTEGER,
qosNewCfgPriorityCoSq INTEGER
}
qosNewCfgPriorityIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Frame priority Number"
::= { qosNewCfgPriorityCoSEntry 1 }
qosNewCfgPriorityCoSq OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CoSq for a Frame Priority Should be between 0 and 7"
::= { qosNewCfgPriorityCoSEntry 2 }
qosCurCfgCosWeightTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CoSq and Weight configuration."
::= { qos8021p 5 }
qosCurCfgCosWeightEntry OBJECT-TYPE
SYNTAX QoSCurCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CoSq and Weight configuration."
INDEX { qosCurCfgCosIndex }
::= { qosCurCfgCosWeightTable 1 }
QoSCurCfgCosWeightEntry ::= SEQUENCE {
qosCurCfgCosIndex INTEGER,
qosCurCfgCosWeight INTEGER
}
qosCurCfgCosIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoSq Number"
::= { qosCurCfgCosWeightEntry 1 }
qosCurCfgCosWeight OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Weight of CoSq"
::= { qosCurCfgCosWeightEntry 2 }
qosNewCfgCosWeightTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of CoSq and Weight configuration."
::= { qos8021p 6 }
qosNewCfgCosWeightEntry OBJECT-TYPE
SYNTAX QoSNewCfgCosWeightEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular CoSq and Weight configuration."
INDEX { qosNewCfgCosIndex }
::= { qosNewCfgCosWeightTable 1 }
QoSNewCfgCosWeightEntry ::= SEQUENCE {
qosNewCfgCosIndex INTEGER,
qosNewCfgCosWeight INTEGER
}
qosNewCfgCosIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CoSq Number"
::= { qosNewCfgCosWeightEntry 1 }
qosNewCfgCosWeight OBJECT-TYPE
SYNTAX INTEGER (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Weight of CoSq"
::= { qosNewCfgCosWeightEntry 2 }
qosCurCfgCosNum OBJECT-TYPE
SYNTAX INTEGER {
num2(2),
num8(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of CoSq."
::= { qos8021p 7 }
qosNewCfgCosNum OBJECT-TYPE
SYNTAX INTEGER {
num2(2),
num8(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of CoSq."
::= { qos8021p 8 }
qosDefaultCfg OBJECT-TYPE
SYNTAX INTEGER {
none(0),
defaultCosNum(1),
defaultWeight(2),
defaultPriority(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is to set QoS configuration to default. none(0) is returned always when read.
defaultCosNum(1): Sets COS queue number to default
defaultWeight(2): Sets COS queue weight to default
defaultPriority(3): Sets COS queue priority mapping to default"
::= { qos8021p 9 }
qosCurCfgDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Dscp to New Dscp/802.1p priority configuration."
::= { qosdscp 1 }
qosCurCfgDscpEntry OBJECT-TYPE
SYNTAX QoSCurCfgDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Dscp to New Dscp/802.1p priority configuration"
INDEX { qosCurCfgDscpIndex }
::= { qosCurCfgDscpTable 1 }
QoSCurCfgDscpEntry ::= SEQUENCE {
qosCurCfgDscpIndex INTEGER,
qosCurCfgMapDscp INTEGER
,qosCurCfgMap8021p INTEGER
}
qosCurCfgDscpIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp value"
::= { qosCurCfgDscpEntry 1 }
qosCurCfgMapDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Map Dscp Value"
::= { qosCurCfgDscpEntry 2 }
qosCurCfgMap8021p OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Map 802.1p value"
::= { qosCurCfgDscpEntry 3 }
qosNewCfgDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of Dscp to New Dscp/802.1p priority configuration."
::= { qosdscp 2 }
qosNewCfgDscpEntry OBJECT-TYPE
SYNTAX QoSNewCfgDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Dscp to New Dscp/802.1p priority configuration"
INDEX { qosNewCfgDscpIndex }
::= { qosNewCfgDscpTable 1 }
QoSNewCfgDscpEntry ::= SEQUENCE {
qosNewCfgDscpIndex INTEGER,
qosNewCfgMapDscp INTEGER
,qosNewCfgMap8021p INTEGER
}
qosNewCfgDscpIndex OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dscp value"
::= { qosNewCfgDscpEntry 1 }
qosNewCfgMapDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Map Dscp Value"
::= { qosNewCfgDscpEntry 2 }
qosNewCfgMap8021p OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Map 802.1p value"
::= { qosNewCfgDscpEntry 3 }
qosCurCfgDscpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for turning on/off DSCP globally."
::= { qosdscp 3 }
qosNewCfgDscpState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is for turning on/off DSCP globally."
::= { qosdscp 4 }
-- WRED ECN Configuration
-- cur port profile table
qosCurCfgPortProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgPortProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS port WRED ECN profile configuration."
::= { qoswredecn 1 }
qoSCurCfgPortProfileEntry OBJECT-TYPE
SYNTAX QoSCurCfgPortProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Transmit queue of a port WRED ECN profile configuration."
INDEX { qosCurCfgProfilePortIndex , qosCurCfgTrqIndex}
::= { qosCurCfgPortProfileTable 1 }
QoSCurCfgPortProfileEntry ::= SEQUENCE {
qosCurCfgProfilePortIndex PortNumber,
qosCurCfgTrqIndex INTEGER,
qosCurCfgTrqNonTcpMin INTEGER,
qosCurCfgTrqNonTcpMax INTEGER,
qosCurCfgTrqNonTcpRate INTEGER,
qosCurCfgTrqTcpMin INTEGER,
qosCurCfgTrqTcpMax INTEGER,
qosCurCfgTrqTcpRate INTEGER,
qosCurCfgPortTrqWredState INTEGER
,qosCurCfgProfilePortAlias DisplayString
}
qosCurCfgProfilePortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Number"
::= { qoSCurCfgPortProfileEntry 1 }
qosCurCfgTrqIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Queue Number"
::= { qoSCurCfgPortProfileEntry 2 }
qosCurCfgTrqNonTcpMin OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN nontcp profile MinThreshold value."
::= { qoSCurCfgPortProfileEntry 3 }
qosCurCfgTrqNonTcpMax OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN nontcp profile MaxThreshold value"
::= { qoSCurCfgPortProfileEntry 4 }
qosCurCfgTrqNonTcpRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN nontcp profile DropRate value."
::= { qoSCurCfgPortProfileEntry 5 }
qosCurCfgTrqTcpMin OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN tcp profile MinThreshold value."
::= { qoSCurCfgPortProfileEntry 6 }
qosCurCfgTrqTcpMax OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN tcp profile MaxThreshold value"
::= { qoSCurCfgPortProfileEntry 7 }
qosCurCfgTrqTcpRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN tcp profile DropRate value."
::= { qoSCurCfgPortProfileEntry 8 }
qosCurCfgPortTrqWredState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for turning on/off WRED per transmit queue per port."
::= { qoSCurCfgPortProfileEntry 9 }
qosCurCfgProfilePortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { qoSCurCfgPortProfileEntry 10 }
-- new port profile table
qosNewCfgPortProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgPortProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS Port WRED ECN configuration."
::= { qoswredecn 2 }
qoSNewCfgPortProfileEntry OBJECT-TYPE
SYNTAX QoSNewCfgPortProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Transmit queue of a port WRED ECN configuration."
INDEX { qosNewCfgProfilePortIndex , qosNewCfgTrqIndex}
::= { qosNewCfgPortProfileTable 1 }
QoSNewCfgPortProfileEntry ::= SEQUENCE {
qosNewCfgProfilePortIndex PortNumber,
qosNewCfgTrqIndex INTEGER,
qosNewCfgTrqNonTcpMin INTEGER,
qosNewCfgTrqNonTcpMax INTEGER,
qosNewCfgTrqNonTcpRate INTEGER,
qosNewCfgTrqTcpMin INTEGER,
qosNewCfgTrqTcpMax INTEGER,
qosNewCfgTrqTcpRate INTEGER,
qosNewCfgPortTrqWredState INTEGER
,qosNewCfgProfilePortAlias DisplayString
}
qosNewCfgProfilePortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Number"
::= { qoSNewCfgPortProfileEntry 1 }
qosNewCfgTrqIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Queue Number"
::= { qoSNewCfgPortProfileEntry 2 }
qosNewCfgTrqNonTcpMin OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN nontcp profile MinThreshold value."
::= { qoSNewCfgPortProfileEntry 3 }
qosNewCfgTrqNonTcpMax OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN nontcp profile MaxThreshold value."
::= { qoSNewCfgPortProfileEntry 4 }
qosNewCfgTrqNonTcpRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN nontcp profile DropRate value."
::= { qoSNewCfgPortProfileEntry 5 }
qosNewCfgTrqTcpMin OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN tcp profile MinThreshold value."
::= { qoSNewCfgPortProfileEntry 6 }
qosNewCfgTrqTcpMax OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN tcp profile MaxThreshold value."
::= { qoSNewCfgPortProfileEntry 7 }
qosNewCfgTrqTcpRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Transmit queue WRED ECN tcp profile DropRate value."
::= { qoSNewCfgPortProfileEntry 8 }
qosNewCfgPortTrqWredState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is for turning on/off WRED per transmit queue per port."
::= { qoSNewCfgPortProfileEntry 9 }
qosNewCfgProfilePortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { qoSNewCfgPortProfileEntry 10 }
-- cur port wred ecn state
qosCurCfgPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS port WRED ECN state configuration."
::= { qoswredecn 3 }
qoSCurCfgPortStateEntry OBJECT-TYPE
SYNTAX QoSCurCfgPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port WRED ECN state configuration."
INDEX { qosCurCfgStatePortIndex }
::= { qosCurCfgPortStateTable 1 }
QoSCurCfgPortStateEntry ::= SEQUENCE {
qosCurCfgStatePortIndex PortNumber,
qosCurCfgPortWredState INTEGER,
qosCurCfgPortEcnState INTEGER
,qosCurCfgStatePortAlias DisplayString
}
qosCurCfgStatePortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Number"
::= { qoSCurCfgPortStateEntry 1 }
qosCurCfgPortWredState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for turning on/off WRED per port."
::= { qoSCurCfgPortStateEntry 2 }
qosCurCfgPortEcnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for turning on/off ECN per port."
::= { qoSCurCfgPortStateEntry 3 }
qosCurCfgStatePortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Alias"
::= { qoSCurCfgPortStateEntry 4 }
-- new port wred ecn state
qosNewCfgPortStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS port WRED ECN state configuration."
::= { qoswredecn 4 }
qoSNewCfgPortStateEntry OBJECT-TYPE
SYNTAX QoSNewCfgPortStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port WRED ECN state configuration."
INDEX { qosNewCfgStatePortIndex }
::= { qosNewCfgPortStateTable 1 }
QoSNewCfgPortStateEntry ::= SEQUENCE {
qosNewCfgStatePortIndex PortNumber,
qosNewCfgPortWredState INTEGER,
qosNewCfgPortEcnState INTEGER
,qosNewCfgStatePortAlias DisplayString
}
qosNewCfgStatePortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Number"
::= { qoSNewCfgPortStateEntry 1 }
qosNewCfgPortWredState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is for turning on/off WRED per port"
::= { qoSNewCfgPortStateEntry 2 }
qosNewCfgPortEcnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is for turning on/off ECN per port."
::= { qoSNewCfgPortStateEntry 3 }
qosNewCfgStatePortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Switch Port Alias"
::= { qoSNewCfgPortStateEntry 4 }
-- global cur profile config
qosCurCfgGlobalProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSCurCfgGlobalProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS global WRED ECN profile configuration."
::= { qoswredecn 5 }
qoSCurCfgGlobalProfileEntry OBJECT-TYPE
SYNTAX QoSCurCfgGlobalProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Transmit queue of global WRED ECN profile configuration."
INDEX { qosCurCfgGlobalTrqIndex}
::= { qosCurCfgGlobalProfileTable 1 }
QoSCurCfgGlobalProfileEntry ::= SEQUENCE {
qosCurCfgGlobalTrqIndex INTEGER,
qosCurCfgGlobalTrqNonTcpMin INTEGER,
qosCurCfgGlobalTrqNonTcpMax INTEGER,
qosCurCfgGlobalTrqNonTcpRate INTEGER,
qosCurCfgGlobalTrqTcpMin INTEGER,
qosCurCfgGlobalTrqTcpMax INTEGER,
qosCurCfgGlobalTrqTcpRate INTEGER,
qosCurCfgGlobalTrqWredState INTEGER
}
qosCurCfgGlobalTrqIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global Transmit Queue Number"
::= { qoSCurCfgGlobalProfileEntry 1 }
qosCurCfgGlobalTrqNonTcpMin OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN nontcp profile MinThreshold value"
::= { qoSCurCfgGlobalProfileEntry 2 }
qosCurCfgGlobalTrqNonTcpMax OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN nontcp profile MaxThreshold value"
::= { qoSCurCfgGlobalProfileEntry 3 }
qosCurCfgGlobalTrqNonTcpRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN nontcp profile DropRate value"
::= { qoSCurCfgGlobalProfileEntry 4 }
qosCurCfgGlobalTrqTcpMin OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN tcp profile MinThreshold value"
::= { qoSCurCfgGlobalProfileEntry 5 }
qosCurCfgGlobalTrqTcpMax OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN tcp profile MaxThreshold value"
::= { qoSCurCfgGlobalProfileEntry 6 }
qosCurCfgGlobalTrqTcpRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN tcp profile DropRate value"
::= { qoSCurCfgGlobalProfileEntry 7 }
qosCurCfgGlobalTrqWredState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for turning on/off WRED per global transmit queue"
::= { qoSCurCfgGlobalProfileEntry 8 }
-- global new profile config
qosNewCfgGlobalProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNewCfgGlobalProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of QOS global WRED ECN profile configuration."
::= { qoswredecn 6 }
qoSNewCfgGlobalProfileEntry OBJECT-TYPE
SYNTAX QoSNewCfgGlobalProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Transmit queue of global WRED ECN profile configuration."
INDEX { qosNewCfgGlobalTrqIndex}
::= { qosNewCfgGlobalProfileTable 1 }
QoSNewCfgGlobalProfileEntry ::= SEQUENCE {
qosNewCfgGlobalTrqIndex INTEGER,
qosNewCfgGlobalTrqNonTcpMin INTEGER,
qosNewCfgGlobalTrqNonTcpMax INTEGER,
qosNewCfgGlobalTrqNonTcpRate INTEGER,
qosNewCfgGlobalTrqTcpMin INTEGER,
qosNewCfgGlobalTrqTcpMax INTEGER,
qosNewCfgGlobalTrqTcpRate INTEGER,
qosNewCfgGlobalTrqWredState INTEGER
}
qosNewCfgGlobalTrqIndex OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Global Transmit Queue Number"
::= { qoSNewCfgGlobalProfileEntry 1 }
qosNewCfgGlobalTrqNonTcpMin OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN nontcp profile MinThreshold value"
::= { qoSNewCfgGlobalProfileEntry 2 }
qosNewCfgGlobalTrqNonTcpMax OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN nontcp profile MaxThreshold value"
::= { qoSNewCfgGlobalProfileEntry 3 }
qosNewCfgGlobalTrqNonTcpRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN nontcp profile DropRate value"
::= { qoSNewCfgGlobalProfileEntry 4 }
qosNewCfgGlobalTrqTcpMin OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN tcp profile MinThreshold value"
::= { qoSNewCfgGlobalProfileEntry 5 }
qosNewCfgGlobalTrqTcpMax OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN tcp profile MaxThreshold value"
::= { qoSNewCfgGlobalProfileEntry 6 }
qosNewCfgGlobalTrqTcpRate OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global transmit queue WRED ECN tcp profile DropRate value"
::= { qoSNewCfgGlobalProfileEntry 7 }
qosNewCfgGlobalTrqWredState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is for turning on/off WRED per global transmit queue"
::= { qoSNewCfgGlobalProfileEntry 8 }
-- cur global wred ecn state
qosCurCfgGlobalWredState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for turning on/off WRED globally."
::= { qoswredecn 7 }
qosCurCfgGlobalEcnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is for turning on/off ECN globally."
::= { qoswredecn 8 }
-- new global wred ecn state
qosNewCfgGlobalWredState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is for turning on/off WRED globally."
::= { qoswredecn 9 }
qosNewCfgGlobalEcnState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is for turning on/off ECN globally."
::= { qoswredecn 10 }
-- ----------------------------------------------------------------------------
-- } INSERT: qos
-- ----------------------------------------------------------------------------
-------------------------------------------------------------------------------
-- Feature Dependent Private MIBs for g7052-mgmt
-------------------------------------------------------------------------------
acl OBJECT IDENTIFIER ::= { g7052-mgmt 9 }
-- ----------------------------------------------------------------------------
-- { INSERT: acl
-- ----------------------------------------------------------------------------
acConfig OBJECT IDENTIFIER ::= { acl 1 }
acList OBJECT IDENTIFIER ::= { acConfig 1 }
aclGroup OBJECT IDENTIFIER ::= { acConfig 3 }
aclCfg OBJECT IDENTIFIER ::= { acConfig 4 }
acl6List OBJECT IDENTIFIER ::= { acConfig 5 }
aclLog OBJECT IDENTIFIER ::= { acConfig 6 }
mAcl OBJECT IDENTIFIER ::= { acConfig 7}
-- ---------------------------------------------------------- --
-- Access Control List (ACL) Configuration
-- ---------------------------------------------------------- --
aclCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current ACL configuration."
::= { acList 1 }
aclCurCfgEntry OBJECT-TYPE
SYNTAX AclCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about a particular ACL configuration entry."
INDEX { aclCurCfgIndex }
::= { aclCurCfgTable 1 }
AclCurCfgEntry ::= SEQUENCE {
aclCurCfgIndex Unsigned32,
aclCurCfgGroup Unsigned32,
aclCurCfgFilterAction INTEGER,
aclCurCfgFilterActionSetPrio INTEGER,
aclCurCfgEthFmt INTEGER,
aclCurCfgTagFmt INTEGER,
aclCurCfgIPFmt INTEGER,
aclCurCfgSrcMACAddress MacAddress,
aclCurCfgSrcMACMask MacAddress,
aclCurCfgDstMACAddress MacAddress,
aclCurCfgDstMACMask MacAddress,
aclCurCfgEthernetTypeName INTEGER,
aclCurCfgEthernetTypeValue INTEGER,
aclCurCfgVLanId INTEGER,
aclCurCfgVLanMask DisplayString,
aclCurCfg8021pPriority INTEGER,
aclCurCfgTypeOfService DisplayString,
aclCurCfgProtocol DisplayString,
aclCurCfgSrcIPAddress IpAddress,
aclCurCfgSrcIPMask IpAddress,
aclCurCfgDstIPAddress IpAddress,
aclCurCfgDstIPMask IpAddress,
aclCurCfgSrcPort INTEGER,
aclCurCfgSrcPortMask DisplayString,
aclCurCfgDstPort INTEGER,
aclCurCfgDstPortMask DisplayString,
aclCurCfgTCPFlags BITS,
aclCurCfgTCPFlagsMask BITS,
aclCurCfgEgressPortIndexes OCTET STRING,
aclCurCfgStatistics INTEGER,
aclCurCfgMeterAction INTEGER,
aclCurCfgMeterEnable INTEGER,
aclCurCfgKbitsSec Unsigned32,
aclCurCfgKbitsBurst INTEGER,
aclCurCfgUser INTEGER,
aclCurCfgInprofDscp INTEGER,
aclCurCfgTos INTEGER,
aclCurCfgOutprofDscp INTEGER,
aclCurCfgUserEnable INTEGER,
aclCurCfgInprofDscpEnable INTEGER,
aclCurCfgOutprofDscpEnable INTEGER
, aclCurCfgMirrorPortIndex Integer32
, aclCurCfgLog INTEGER
,aclCurCfgMirrorPortAlias DisplayString
,aclCurCfgEgressPortAliases DisplayString
}
aclCurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL entry."
::= { aclCurCfgEntry 1 }
aclCurCfgGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group."
::= { aclCurCfgEntry 3 }
aclCurCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2)
,setprio(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL entry."
::= { aclCurCfgEntry 4 }
aclCurCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value to be used when the action to be performed is setprio
for this ACL entry."
::= { aclCurCfgEntry 5 }
aclCurCfgEthFmt OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet2(1),
snap(2),
llc(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet ethernet format to be filtered."
::= { aclCurCfgEntry 6 }
aclCurCfgTagFmt OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
any(2),
untagged(3),
tagged(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet tag format to be filtered."
::= { aclCurCfgEntry 7 }
aclCurCfgIPFmt OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ipv4(2),
ipv6(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The packet IP format to be filtered."
::= { aclCurCfgEntry 8 }
aclCurCfgSrcMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source MAC address to be filtered."
::= { aclCurCfgEntry 9 }
aclCurCfgSrcMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgSrcMACAddress for filtering."
::= { aclCurCfgEntry 10 }
aclCurCfgDstMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination MAC address to be filtered."
::= { aclCurCfgEntry 11 }
aclCurCfgDstMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgDstMACAddress for filtering."
::= { aclCurCfgEntry 12 }
aclCurCfgEthernetTypeName OBJECT-TYPE
SYNTAX INTEGER {
none(0),
arp(1),
ipv4(2),
ipv6(3),
mpls(4),
rarp(5),
any(6),
other(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered."
::= { aclCurCfgEntry 13 }
aclCurCfgEthernetTypeValue OBJECT-TYPE
SYNTAX INTEGER (1536..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object."
::= { aclCurCfgEntry 14 }
aclCurCfgVLanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual LAN identifier to be filtered."
::= { aclCurCfgEntry 15 }
aclCurCfgVLanMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgVLanId for filtering."
::= { aclCurCfgEntry 16 }
aclCurCfg8021pPriority OBJECT-TYPE
SYNTAX INTEGER {
none(0),
priority0(1),
priority1(2),
priority2(3),
priority3(4),
priority4(5),
priority5(6),
priority6(7),
priority7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 802.1p priority to be filtered."
::= { aclCurCfgEntry 17 }
aclCurCfgTypeOfService OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of service to be filtered.
'none' for not initialised, within the
range 0-255"
::= { aclCurCfgEntry 18 }
aclCurCfgProtocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol to be filtered.
'none' for not initialised, within the
range 0-255"
::= { aclCurCfgEntry 19 }
aclCurCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address to be filtered."
::= { aclCurCfgEntry 20 }
aclCurCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgSrcIPAddress for filtering."
::= { aclCurCfgEntry 21 }
aclCurCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address to be filtered."
::= { aclCurCfgEntry 22 }
aclCurCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to aclCurCfgDstIPAddress for filtering."
::= { aclCurCfgEntry 23 }
aclCurCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { aclCurCfgEntry 24 }
aclCurCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgSrcPort for filtering."
::= { aclCurCfgEntry 25 }
aclCurCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { aclCurCfgEntry 26 }
aclCurCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to aclCurCfgDstPort for filtering."
::= { aclCurCfgEntry 27 }
aclCurCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclCurCfgEntry 28 }
aclCurCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclCurCfgEntry 39 }
aclCurCfgEgressPortIndexes OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering."
::= { aclCurCfgEntry 29 }
aclCurCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL is enabled or not."
::= { aclCurCfgEntry 30 }
aclCurCfgMeterAction OBJECT-TYPE
SYNTAX INTEGER {
unconfigured(0),
outdrop(1),
outpass(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Meter Action for this ACL."
::= { aclCurCfgEntry 41 }
aclCurCfgMeterEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Meter state for this ACL."
::= { aclCurCfgEntry 42 }
aclCurCfgKbitsSec OBJECT-TYPE
SYNTAX Unsigned32 (64..10000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The commited rate of meter associated with this ACL entry."
::= { aclCurCfgEntry 43 }
aclCurCfgKbitsBurst OBJECT-TYPE
SYNTAX INTEGER {
kbits32(32),
kbits64(64),
kbits128(128),
kbits256(256),
kbits512(512),
kbits1024(1024),
kbits2048(2048),
kbits4096(4096)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maxmium burst sizeof meter associated with this ACL entry."
::= { aclCurCfgEntry 44 }
aclCurCfgUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set user defined priority for this ACL."
::= { aclCurCfgEntry 45 }
aclCurCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { aclCurCfgEntry 46 }
aclCurCfgTos OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To enable/disable setting pkts based on TOS bits."
::= { aclCurCfgEntry 47 }
aclCurCfgOutprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set out profile pkts DSCP value."
::= { aclCurCfgEntry 48 }
aclCurCfgUserEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
userdefined(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set update method for this ACL."
::= { aclCurCfgEntry 49 }
aclCurCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this ACL is enabled or not."
::= { aclCurCfgEntry 50 }
aclCurCfgOutprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether out profile update DSCP for this ACL is enabled or not."
::= { aclCurCfgEntry 51 }
aclCurCfgMirrorPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring."
::= { aclCurCfgEntry 74 }
aclCurCfgLog OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether log for this ACL is enabled or not."
::= { aclCurCfgEntry 81 }
aclCurCfgMirrorPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mirror port alias."
::= { aclCurCfgEntry 91 }
aclCurCfgEgressPortAliases OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The egress port alias."
::= { aclCurCfgEntry 92 }
--
-- New ACL Configuration Table
--
aclNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new ACL configuration."
::= { acList 2 }
aclNewCfgEntry OBJECT-TYPE
SYNTAX AclNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular ACL configuration."
INDEX { aclNewCfgIndex }
::= { aclNewCfgTable 1 }
AclNewCfgEntry ::= SEQUENCE {
aclNewCfgIndex Unsigned32,
aclNewCfgGroup Unsigned32,
aclNewCfgFilterAction INTEGER,
aclNewCfgFilterActionSetPrio INTEGER,
aclNewCfgEthFmt INTEGER,
aclNewCfgTagFmt INTEGER,
aclNewCfgIPFmt INTEGER,
aclNewCfgSrcMACAddress MacAddress,
aclNewCfgSrcMACMask MacAddress,
aclNewCfgDstMACAddress MacAddress,
aclNewCfgDstMACMask MacAddress,
aclNewCfgEthernetTypeName INTEGER,
aclNewCfgEthernetTypeValue INTEGER,
aclNewCfgVLanId INTEGER,
aclNewCfgVLanMask DisplayString,
aclNewCfg8021pPriority INTEGER,
aclNewCfgTypeOfService DisplayString,
aclNewCfgProtocol DisplayString,
aclNewCfgSrcIPAddress IpAddress,
aclNewCfgSrcIPMask IpAddress,
aclNewCfgDstIPAddress IpAddress,
aclNewCfgDstIPMask IpAddress,
aclNewCfgSrcPort INTEGER,
aclNewCfgSrcPortMask DisplayString,
aclNewCfgDstPort INTEGER,
aclNewCfgDstPortMask DisplayString,
aclNewCfgTCPFlags BITS,
aclNewCfgTCPFlagsMask BITS,
aclNewCfgEgressPortIndexes OCTET STRING,
aclNewCfgStatistics INTEGER,
aclNewCfgAddEgressPortIndex PortNumber,
aclNewCfgRemoveEgressPortIndex PortNumber,
aclNewCfgDelete INTEGER,
aclNewCfgMeterAction INTEGER,
aclNewCfgMeterEnable INTEGER,
aclNewCfgKbitsSec Unsigned32,
aclNewCfgKbitsBurst INTEGER,
aclNewCfgUser INTEGER,
aclNewCfgInprofDscp INTEGER,
aclNewCfgTos INTEGER,
aclNewCfgOutprofDscp INTEGER,
aclNewCfgUserEnable INTEGER,
aclNewCfgInprofDscpEnable INTEGER,
aclNewCfgOutprofDscpEnable INTEGER,
aclNewCfgReset INTEGER
, aclNewCfgEthernetReset INTEGER
, aclNewCfgIpv4Reset INTEGER
, aclNewCfgTcpudpReset INTEGER
, aclNewCfgMeterReset INTEGER
, aclNewCfgRemarkReset INTEGER
, aclNewCfgRemarkInprofReset INTEGER
, aclNewCfgRemarkOutprofReset INTEGER
, aclNewCfgPktfmtReset INTEGER
, aclNewCfgMirrorPortIndex Integer32
, aclNewCfgLog INTEGER
,aclNewCfgMirrorPortAlias DisplayString
,aclNewCfgAddEgressPortAlias DisplayString
,aclNewCfgRemoveEgressPortAlias DisplayString
,aclNewCfgEgressPortAliases DisplayString
}
aclNewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL entry."
::= { aclNewCfgEntry 1 }
aclNewCfgGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group."
::= { aclNewCfgEntry 3 }
aclNewCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2)
,setprio(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL entry."
::= { aclNewCfgEntry 4 }
aclNewCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The COS queue to be used when the action for this ACL entry is
set to setprio."
::= { aclNewCfgEntry 5 }
aclNewCfgEthFmt OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethernet2(1),
snap(2),
llc(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet ethernet format to be filtered."
::= { aclNewCfgEntry 6 }
aclNewCfgTagFmt OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
any(2),
none(3),
tagged(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet tagging format to be filtered."
::= { aclNewCfgEntry 7 }
aclNewCfgIPFmt OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ipv4(2),
ipv6(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The packet IP format to be filtered."
::= { aclNewCfgEntry 8 }
aclNewCfgSrcMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff."
::= { aclNewCfgEntry 9 }
aclNewCfgSrcMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgSrcMACAddress
for filtering."
::= { aclNewCfgEntry 10 }
aclNewCfgDstMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff."
::= { aclNewCfgEntry 11 }
aclNewCfgDstMACMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgDstMACAddress
for filtering."
::= { aclNewCfgEntry 12 }
aclNewCfgEthernetTypeName OBJECT-TYPE
SYNTAX INTEGER {
none(0),
arp(1),
ipv4(2),
ipv6(3),
mpls(4),
rarp(5),
any(6),
other(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)
"
::= { aclNewCfgEntry 13 }
aclNewCfgEthernetTypeValue OBJECT-TYPE
SYNTAX INTEGER (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object."
::= { aclNewCfgEntry 14 }
aclNewCfgVLanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff). When this
object is set to 0, the Vlan ACL filter is disabled."
::= { aclNewCfgEntry 15 }
aclNewCfgVLanMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgVLanId for filtering."
::= { aclNewCfgEntry 16 }
aclNewCfg8021pPriority OBJECT-TYPE
SYNTAX INTEGER {
none(0),
priority0(1),
priority1(2),
priority2(3),
priority3(4),
priority4(5),
priority5(6),
priority6(7),
priority7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 802.1p priority to be filtered."
::= { aclNewCfgEntry 17 }
aclNewCfgTypeOfService OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of service to be filtered.
'none' for not initialised, within the
range 0-255"
::= { aclNewCfgEntry 18 }
aclNewCfgProtocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol to be filtered.
'none' for not initialised, within the
range 0-255"
::= { aclNewCfgEntry 19 }
aclNewCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255."
::= { aclNewCfgEntry 20 }
aclNewCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgSrcIPAddress
for filtering."
::= { aclNewCfgEntry 21 }
aclNewCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255."
::= { aclNewCfgEntry 22 }
aclNewCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask to be applied to aclNewCfgDstIPAddress for filtering."
::= { aclNewCfgEntry 23 }
aclNewCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff)."
::= { aclNewCfgEntry 24 }
aclNewCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgSrcPort for filtering."
::= { aclNewCfgEntry 25 }
aclNewCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff)."
::= { aclNewCfgEntry 26 }
aclNewCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask to be applied to aclNewCfgDstPort for filtering."
::= { aclNewCfgEntry 27 }
aclNewCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { aclNewCfgEntry 28 }
aclNewCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
Default value is 0x3f."
::= { aclNewCfgEntry 39 }
aclNewCfgEgressPortIndexes OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering."
::= { aclNewCfgEntry 29 }
aclNewCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL is enabled or not."
::= { aclNewCfgEntry 30 }
aclNewCfgAddEgressPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to the specified ACL for egress filtering.
A value of zero is always returned when this object is read."
::= { aclNewCfgEntry 31 }
aclNewCfgRemoveEgressPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from the specified ACL. A value of zero
is always returned when this object is read."
::= { aclNewCfgEntry 32 }
aclNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 33 }
aclNewCfgMeterAction OBJECT-TYPE
SYNTAX INTEGER {
unconfigured(0),
outdrop(1),
outpass(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Meter Action for this ACL."
::= { aclNewCfgEntry 41 }
aclNewCfgMeterEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Meter state for this ACL."
::= { aclNewCfgEntry 42 }
aclNewCfgKbitsSec OBJECT-TYPE
SYNTAX Unsigned32 (64..10000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The commited rate of meter associated with this ACL entry."
::= { aclNewCfgEntry 43 }
aclNewCfgKbitsBurst OBJECT-TYPE
SYNTAX INTEGER {
kbits32(32),
kbits64(64),
kbits128(128),
kbits256(256),
kbits512(512),
kbits1024(1024),
kbits2048(2048),
kbits4096(4096)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum burst size of the meter associated with this ACL entry."
::= { aclNewCfgEntry 44 }
aclNewCfgUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set user defined priority for this ACL."
::= { aclNewCfgEntry 45 }
aclNewCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { aclNewCfgEntry 46 }
aclNewCfgTos OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable/disable setting pkts based on TOS bits."
::= { aclNewCfgEntry 47 }
aclNewCfgOutprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set out profile pkts DSCP value."
::= { aclNewCfgEntry 48 }
aclNewCfgUserEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
userdefined(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set update method for this ACL."
::= { aclNewCfgEntry 49 }
aclNewCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting a value
for aclNewCfgInprofDscp object."
::= { aclNewCfgEntry 50 }
aclNewCfgOutprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting a value
for aclNewCfgOutprofDscp object."
::= { aclNewCfgEntry 51 }
aclNewCfgReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 52 }
aclNewCfgEthernetReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 53 }
aclNewCfgIpv4Reset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 54 }
aclNewCfgTcpudpReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 55 }
aclNewCfgMeterReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Meter entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 56 }
aclNewCfgRemarkReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Remark entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 57 }
aclNewCfgRemarkInprofReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 58 }
aclNewCfgRemarkOutprofReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 59 }
aclNewCfgPktfmtReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Pktfmt entry. A value of
other(1) is always returned when this object is read."
::= { aclNewCfgEntry 60 }
aclNewCfgMirrorPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set port in the ACL for mirroring.
n > 0 - the represented port is configured for mirroring.
0 - the represented port is not configured for mirroring."
::= { aclNewCfgEntry 74 }
aclNewCfgLog OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether log for this ACL is enabled or not."
::= { aclNewCfgEntry 81 }
aclNewCfgMirrorPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mirror port alias."
::= { aclNewCfgEntry 91 }
aclNewCfgEgressPortAliases OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The egress port alias."
::= { aclNewCfgEntry 92 }
aclNewCfgAddEgressPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added using it's alias to the specified ACL for egress filtering.
A value of zero is always returned when this object is read."
::= { aclNewCfgEntry 93 }
aclNewCfgRemoveEgressPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed using it's alias to the specified ACL for egress filtering.
A value of zero is always returned when this object is read."
::= { aclNewCfgEntry 94 }
aclTableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the acl config tables."
::= { acList 5 }
-- ---------------------------------------------------------- --
-- Management Access Control List (MACL) Configuration
-- ---------------------------------------------------------- --
mAclCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF MAclCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current Management ACL configuration."
::= { mAcl 1 }
mAclCurCfgEntry OBJECT-TYPE
SYNTAX MAclCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about a particular Management ACL configuration entry."
INDEX { mAclCurCfgIndex }
::= { mAclCurCfgTable 1 }
MAclCurCfgEntry ::= SEQUENCE {
mAclCurCfgIndex Unsigned32,
mAclCurCfgUserEnable INTEGER,
mAclCurCfgFilterAction INTEGER,
mAclCurCfgProtocol DisplayString,
mAclCurCfgSrcIPAddress IpAddress,
mAclCurCfgSrcIPMask IpAddress,
mAclCurCfgDstIPAddress IpAddress,
mAclCurCfgDstIPMask IpAddress,
mAclCurCfgSrcPort INTEGER,
mAclCurCfgSrcPortMask DisplayString,
mAclCurCfgDstPort INTEGER,
mAclCurCfgDstPortMask DisplayString,
mAclCurCfgStatistics INTEGER
}
mAclCurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this Management ACL entry."
::= { mAclCurCfgEntry 1 }
mAclCurCfgUserEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set update method for this mACL."
::= { mAclCurCfgEntry 2 }
mAclCurCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this mACL entry."
::= { mAclCurCfgEntry 3 }
mAclCurCfgProtocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol to be filtered.
'none' for not initialised, within the
range 0-255"
::= { mAclCurCfgEntry 4 }
mAclCurCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IP address to be filtered."
::= { mAclCurCfgEntry 5 }
mAclCurCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to mAclCurCfgSrcIPAddress for filtering."
::= { mAclCurCfgEntry 6 }
mAclCurCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address to be filtered."
::= { mAclCurCfgEntry 7 }
mAclCurCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address mask applied to mAclCurCfgDstIPAddress for filtering."
::= { mAclCurCfgEntry 8 }
mAclCurCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { mAclCurCfgEntry 9 }
mAclCurCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to mAclCurCfgSrcPort for filtering."
::= { mAclCurCfgEntry 10 }
mAclCurCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { mAclCurCfgEntry 11 }
mAclCurCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to mAclCurCfgDstPort for filtering."
::= { mAclCurCfgEntry 12 }
mAclCurCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether statistics collection for this mACL is enabled or not."
::= { mAclCurCfgEntry 13 }
--
-- New Management ACL Configuration Table
--
mAclNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF MAclNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new Management ACL configuration."
::= { mAcl 2 }
mAclNewCfgEntry OBJECT-TYPE
SYNTAX MAclNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular Management ACL configuration entry."
INDEX { mAclNewCfgIndex }
::= { mAclNewCfgTable 1 }
MAclNewCfgEntry ::= SEQUENCE {
mAclNewCfgIndex Unsigned32,
mAclNewCfgUserEnable INTEGER,
mAclNewCfgFilterAction INTEGER,
mAclNewCfgProtocol DisplayString,
mAclNewCfgSrcIPAddress IpAddress,
mAclNewCfgSrcIPMask IpAddress,
mAclNewCfgDstIPAddress IpAddress,
mAclNewCfgDstIPMask IpAddress,
mAclNewCfgSrcPort INTEGER,
mAclNewCfgSrcPortMask DisplayString,
mAclNewCfgDstPort INTEGER,
mAclNewCfgDstPortMask DisplayString,
mAclNewCfgStatistics INTEGER,
mAclNewCfgDelete INTEGER,
mAclNewCfgReset INTEGER,
mAclNewCfgIpv4Reset INTEGER,
mAclNewCfgTcpudpReset INTEGER
}
mAclNewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this Management ACL entry."
::= { mAclNewCfgEntry 1 }
mAclNewCfgUserEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set update method for this mACL."
::= { mAclNewCfgEntry 2 }
mAclNewCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this mACL entry."
::= { mAclNewCfgEntry 3 }
mAclNewCfgProtocol OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol to be filtered.
'none' for not initialised, within the
range 0-255"
::= { mAclNewCfgEntry 4 }
mAclNewCfgSrcIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source IP address to be filtered."
::= { mAclNewCfgEntry 5 }
mAclNewCfgSrcIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask applied to mAclNewCfgSrcIPAddress for filtering."
::= { mAclNewCfgEntry 6 }
mAclNewCfgDstIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IP address to be filtered."
::= { mAclNewCfgEntry 7 }
mAclNewCfgDstIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The address mask applied to mAclNewCfgDstIPAddress for filtering."
::= { mAclNewCfgEntry 8 }
mAclNewCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { mAclNewCfgEntry 9 }
mAclNewCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask applied to mAclNewCfgSrcPort for filtering."
::= { mAclNewCfgEntry 10 }
mAclNewCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { mAclNewCfgEntry 11 }
mAclNewCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask applied to mAclNewCfgDstPort for filtering."
::= { mAclNewCfgEntry 12 }
mAclNewCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether statistics collection for this mACL is enabled or not."
::= { mAclNewCfgEntry 13 }
mAclNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an MACL entry. A value of
other(1) is always returned when this object is read."
::= { mAclNewCfgEntry 14 }
mAclNewCfgReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an MACL entry. A value of
other(1) is always returned when this object is read."
::= { mAclNewCfgEntry 15 }
mAclNewCfgIpv4Reset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read."
::= { mAclNewCfgEntry 16 }
mAclNewCfgTcpudpReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an MACL Tcpudp entry. A value of
other(1) is always returned when this object is read."
::= { mAclNewCfgEntry 17 }
-- ---------------------------------------------------------- --
-- Access Control List6 (ACL6) Configuration
-- ---------------------------------------------------------- --
acl6CurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Acl6CurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current ACL6 configuration."
::= { acl6List 1 }
acl6CurCfgEntry OBJECT-TYPE
SYNTAX Acl6CurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current information about a particular ACL6 configuration entry."
INDEX { acl6CurCfgIndex }
::= { acl6CurCfgTable 1 }
Acl6CurCfgEntry ::= SEQUENCE {
acl6CurCfgIndex Unsigned32,
acl6CurCfgGroup Unsigned32,
acl6CurCfgFilterAction INTEGER,
acl6CurCfgFilterActionSetPrio INTEGER,
acl6CurCfgSrcIPv6Address DisplayString,
acl6CurCfgSrcIPv6PrefixLen INTEGER,
acl6CurCfgDstIPv6Address DisplayString,
acl6CurCfgDstIPv6PrefixLen INTEGER,
acl6CurCfgIPv6FlowLabel DisplayString,
acl6CurCfgIPv6TrafficClass DisplayString,
acl6CurCfgIPv6NextHeader DisplayString,
acl6CurCfgSrcPort INTEGER,
acl6CurCfgSrcPortMask DisplayString,
acl6CurCfgDstPort INTEGER,
acl6CurCfgDstPortMask DisplayString,
acl6CurCfgTCPFlags BITS,
acl6CurCfgTCPFlagsMask BITS,
acl6CurCfgEgressPortIndexes OCTET STRING,
acl6CurCfgStatistics INTEGER,
acl6CurCfgUser INTEGER,
acl6CurCfgInprofDscp INTEGER,
acl6CurCfgTos INTEGER,
acl6CurCfgUserEnable INTEGER,
acl6CurCfgInprofDscpEnable INTEGER
, acl6CurCfgLog INTEGER
,acl6CurCfgEgressPortAliases DisplayString
}
acl6CurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL6 entry."
::= { acl6CurCfgEntry 1 }
acl6CurCfgGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group."
::= { acl6CurCfgEntry 2 }
acl6CurCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2)
,setprio(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL6 entry."
::= { acl6CurCfgEntry 3 }
acl6CurCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value to be used when the action to be performed is setprio
for this ACL6 entry."
::= { acl6CurCfgEntry 4 }
acl6CurCfgSrcIPv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { acl6CurCfgEntry 5 }
acl6CurCfgSrcIPv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering."
::= { acl6CurCfgEntry 6 }
acl6CurCfgDstIPv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { acl6CurCfgEntry 7 }
acl6CurCfgDstIPv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering."
::= { acl6CurCfgEntry 8 }
acl6CurCfgIPv6FlowLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 FlowLabel to be filtered.
'none' for not initialised, within the
range 0-1048575"
::= { acl6CurCfgEntry 9 }
acl6CurCfgIPv6TrafficClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 Traffic Class to be filtered.
'none' for not initialised, within the
range 0-255"
::= { acl6CurCfgEntry 10 }
acl6CurCfgIPv6NextHeader OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255"
::= { acl6CurCfgEntry 11 }
acl6CurCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { acl6CurCfgEntry 12 }
acl6CurCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to acl6CurCfgSrcPort for filtering."
::= { acl6CurCfgEntry 13 }
acl6CurCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { acl6CurCfgEntry 14 }
acl6CurCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask applied to acl6CurCfgDstPort for filtering."
::= { acl6CurCfgEntry 15 }
acl6CurCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { acl6CurCfgEntry 16 }
acl6CurCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { acl6CurCfgEntry 17 }
acl6CurCfgEgressPortIndexes OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering."
::= { acl6CurCfgEntry 18 }
acl6CurCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL6 is enabled or not."
::= { acl6CurCfgEntry 19 }
acl6CurCfgUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set user defined priority for this ACL6."
::= { acl6CurCfgEntry 20 }
acl6CurCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { acl6CurCfgEntry 21 }
acl6CurCfgTos OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To enable/disable setting pkts based on TOS bits."
::= { acl6CurCfgEntry 22 }
acl6CurCfgUserEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
userdefined(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set update method for this ACL6."
::= { acl6CurCfgEntry 24 }
acl6CurCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this ACL6 is enabled or not."
::= { acl6CurCfgEntry 25 }
acl6CurCfgLog OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether log for this ACL is enabled or not."
::= { acl6CurCfgEntry 26 }
acl6CurCfgEgressPortAliases OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias in the ACL6 configured for egress filtering."
::= { acl6CurCfgEntry 34 }
--
-- New ACL6 Configuration Table
--
acl6NewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Acl6NewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new ACL6 configuration."
::= { acl6List 2 }
acl6NewCfgEntry OBJECT-TYPE
SYNTAX Acl6NewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular ACL6 configuration."
INDEX { acl6NewCfgIndex }
::= { acl6NewCfgTable 1 }
Acl6NewCfgEntry ::= SEQUENCE {
acl6NewCfgIndex Unsigned32,
acl6NewCfgGroup Unsigned32,
acl6NewCfgFilterAction INTEGER,
acl6NewCfgFilterActionSetPrio INTEGER,
acl6NewCfgSrcIPv6Address DisplayString,
acl6NewCfgSrcIPv6PrefixLen INTEGER,
acl6NewCfgDstIPv6Address DisplayString,
acl6NewCfgDstIPv6PrefixLen INTEGER,
acl6NewCfgIPv6FlowLabel DisplayString,
acl6NewCfgIPv6TrafficClass DisplayString,
acl6NewCfgIPv6NextHeader DisplayString,
acl6NewCfgSrcPort INTEGER,
acl6NewCfgSrcPortMask DisplayString,
acl6NewCfgDstPort INTEGER,
acl6NewCfgDstPortMask DisplayString,
acl6NewCfgTCPFlags BITS,
acl6NewCfgTCPFlagsMask BITS,
acl6NewCfgEgressPortIndexes OCTET STRING,
acl6NewCfgStatistics INTEGER,
acl6NewCfgAddEgressPortIndex PortNumber,
acl6NewCfgRemoveEgressPortIndex PortNumber,
acl6NewCfgDelete INTEGER,
acl6NewCfgUser INTEGER,
acl6NewCfgInprofDscp INTEGER,
acl6NewCfgTos INTEGER,
acl6NewCfgUserEnable INTEGER,
acl6NewCfgInprofDscpEnable INTEGER
, acl6NewCfgIPv6Reset INTEGER
, acl6NewCfgTcpudpReset INTEGER
, acl6NewCfgRemarkInprofReset INTEGER
, acl6NewCfgLog INTEGER
,acl6NewCfgAddEgressPortAlias DisplayString
,acl6NewCfgRemoveEgressPortAlias DisplayString
,acl6NewCfgEgressPortAliases DisplayString
}
acl6NewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL6 entry."
::= { acl6NewCfgEntry 1 }
acl6NewCfgGroup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the ACL group to which this ACL6 entry is a member of.
A value of zero means the ACL6 is not a member of any group."
::= { acl6NewCfgEntry 2 }
acl6NewCfgFilterAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
permit(1),
deny(2)
,setprio(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be performed on a packet that matches the filter
settings of this ACL6 entry."
::= { acl6NewCfgEntry 3 }
acl6NewCfgFilterActionSetPrio OBJECT-TYPE
SYNTAX INTEGER {
none(0),
prio0(1),
prio1(2),
prio2(3),
prio3(4),
prio4(5),
prio5(6),
prio6(7),
prio7(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The COS queue to be used when the action for this ACL6 entry is
set to setprio."
::= { acl6NewCfgEntry 4 }
acl6NewCfgSrcIPv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { acl6NewCfgEntry 5 }
acl6NewCfgSrcIPv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 prefix applied to acl6CurCfgSrcIPv6PrefixLen for filtering."
::= { acl6NewCfgEntry 6 }
acl6NewCfgDstIPv6Address OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination IPv6 address to be filtered.
Address should be 4-byte hexadecimal colon notation.
Valid IPv6 address should be in any of the following forms
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxxx::xxxx:xxxx:xxxx:xxxx"
::= { acl6NewCfgEntry 7 }
acl6NewCfgDstIPv6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 prefix applied to acl6CurCfgDstIPv6PrefixLen for filtering."
::= { acl6NewCfgEntry 8 }
acl6NewCfgIPv6FlowLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 flow label to be filtered.
'none' for not initialised, within the
range 0-1048575"
::= { acl6NewCfgEntry 9 }
acl6NewCfgIPv6TrafficClass OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 traffic class to be filtered.
'none' for not initialised, within the
range 0-255"
::= { acl6NewCfgEntry 10 }
acl6NewCfgIPv6NextHeader OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IPv6 next header to be filtered.
'none' for not initialised, within the
range 0-255"
::= { acl6NewCfgEntry 11 }
acl6NewCfgSrcPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source TCP/UDP port number to be filtered."
::= { acl6NewCfgEntry 12 }
acl6NewCfgSrcPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask applied to acl6CurCfgSrcPort for filtering."
::= { acl6NewCfgEntry 13 }
acl6NewCfgDstPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination TCP/UDP port number to be filtered."
::= { acl6NewCfgEntry 14 }
acl6NewCfgDstPortMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mask applied to acl6CurCfgDstPort for filtering."
::= { acl6NewCfgEntry 15 }
acl6NewCfgTCPFlags OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { acl6NewCfgEntry 16 }
acl6NewCfgTCPFlagsMask OBJECT-TYPE
SYNTAX BITS {
reserved1(0),
reserved2(1),
tcpURG(2),
tcpACK(3),
tcpPSH(4),
tcpRST(5),
tcpSYN(6),
tcpFIN(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
"
::= { acl6NewCfgEntry 17 }
acl6NewCfgEgressPortIndexes OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port list in the ACL6 configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering."
::= { acl6NewCfgEntry 18 }
acl6NewCfgStatistics OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether statistics collection for this ACL6 is enabled or not."
::= { acl6NewCfgEntry 19 }
acl6NewCfgAddEgressPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be added to the specified ACL6 for egress filtering.
A value of zero is always returned when this object is read."
::= { acl6NewCfgEntry 20 }
acl6NewCfgRemoveEgressPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port to be removed from the specified ACL6. A value of zero
is always returned when this object is read."
::= { acl6NewCfgEntry 21 }
acl6NewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an ACL6 entry. A value of
other(1) is always returned when this object is read."
::= { acl6NewCfgEntry 22 }
acl6NewCfgUser OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set user defined priority for this ACL6."
::= { acl6NewCfgEntry 23 }
acl6NewCfgInprofDscp OBJECT-TYPE
SYNTAX INTEGER (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set in profile pkts DSCP value."
::= { acl6NewCfgEntry 24 }
acl6NewCfgTos OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable/disable setting pkts based on TOS bits."
::= { acl6NewCfgEntry 25 }
acl6NewCfgUserEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
userdefined(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set update method for this ACL6."
::= { acl6NewCfgEntry 27 }
acl6NewCfgInprofDscpEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether in profile update DSCP for this ACL6 is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL6.
The value enable(1) is automatically set when setting a value
for aclNewCfgInprofDscp object."
::= { acl6NewCfgEntry 28 }
acl6NewCfgIPv6Reset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL IPV6 entry. A value of
other(1) is always returned when this object is read."
::= { acl6NewCfgEntry 30 }
acl6NewCfgTcpudpReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL6 Tcpudp entry. A value of
other(1) is always returned when this object is read."
::= { acl6NewCfgEntry 31 }
acl6NewCfgRemarkInprofReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read."
::= { acl6NewCfgEntry 32 }
acl6NewCfgLog OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether log for this ACL is enabled or not."
::= { acl6NewCfgEntry 33 }
acl6NewCfgAddEgressPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port alias to be added to the specified ACL6 for egress filtering.
A value of zero is always returned when this object is read."
::= { acl6NewCfgEntry 43 }
acl6NewCfgRemoveEgressPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port alias to be removed from the specified ACL6. A value of zero
is always returned when this object is read."
::= { acl6NewCfgEntry 44 }
acl6NewCfgEgressPortAliases OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias in the ACL6 configured for egress filtering."
::= { acl6NewCfgEntry 45 }
acl6TableMaxSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries in the acl6 config tables."
::= { acl6List 3 }
-- ---------------------------------------------------------- --
-- ACL Log Configuration
-- ---------------------------------------------------------- --
aclLogCurInterval OBJECT-TYPE
SYNTAX INTEGER (5..600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval secends of displaying Logs.
Default is 300s."
::= { aclLog 1 }
aclLogNewInterval OBJECT-TYPE
SYNTAX INTEGER (5..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval secends of displaying Logs.
Default is 300s."
::= { aclLog 2 }
aclLogCurRateLimit OBJECT-TYPE
SYNTAX INTEGER (1..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate limit of ACL Log queue.
Default is 10pps."
::= { aclLog 3 }
aclLogNewRateLimit OBJECT-TYPE
SYNTAX INTEGER (1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rate limit of ACL Log queue.
Default is 10pps."
::= { aclLog 4 }
-- ---------------------------------------------------------- --
-- ACL Group Configuration
-- ---------------------------------------------------------- --
aclGroupCurCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclGroupCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of current ACL Group configuration."
::= { aclGroup 1 }
aclGroupCurCfgEntry OBJECT-TYPE
SYNTAX AclGroupCurCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular ACL configuration."
INDEX { aclGroupCurCfgIndex }
::= { aclGroupCurCfgTable 1 }
AclGroupCurCfgEntry ::= SEQUENCE {
aclGroupCurCfgIndex Unsigned32,
aclGroupCurCfgMemberAcls OCTET STRING
, aclGroupCurCfgMemberAcl6s OCTET STRING
}
aclGroupCurCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL Group entry."
::= { aclGroupCurCfgEntry 1 }
aclGroupCurCfgMemberAcls OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the group.
0 - the represented ACL is not a member of the group."
::= { aclGroupCurCfgEntry 2 }
aclGroupCurCfgMemberAcl6s OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL6 members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL6 9
|| ||
|| ||___ ACL6 8
|| |____ ACL6 7
|| . . .
||_________ ACL6 2
|__________ ACL6 1
where x:
1 - the represented ACL6 is a member of the group.
0 - the represented ACL6 is not a member of the group."
::= { aclGroupCurCfgEntry 9 }
aclGroupNewCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclGroupNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of new ACL Group configuration."
::= { aclGroup 2 }
aclGroupNewCfgEntry OBJECT-TYPE
SYNTAX AclGroupNewCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"New information about a particular ACL configuration."
INDEX { aclGroupNewCfgIndex }
::= { aclGroupNewCfgTable 1 }
AclGroupNewCfgEntry ::= SEQUENCE {
aclGroupNewCfgIndex Unsigned32,
aclGroupNewCfgMemberAcls OCTET STRING,
aclGroupNewCfgAddAcl Unsigned32,
aclGroupNewCfgRemoveAcl Unsigned32,
aclGroupNewCfgDelete INTEGER
, aclGroupNewCfgMemberAcl6s OCTET STRING
, aclGroupNewCfgAddAcl6 Unsigned32
, aclGroupNewCfgRemoveAcl6 Unsigned32
}
aclGroupNewCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index associated with this ACL Group entry."
::= { aclGroupNewCfgEntry 1 }
aclGroupNewCfgMemberAcls OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the group.
0 - the represented ACL is not a member of the group."
::= { aclGroupNewCfgEntry 2 }
aclGroupNewCfgAddAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read."
::= { aclGroupNewCfgEntry 4 }
aclGroupNewCfgRemoveAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read."
::= { aclGroupNewCfgEntry 5 }
aclGroupNewCfgDelete OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to delete an ACL group. A value of other(1)
is always returned when this object is read."
::= { aclGroupNewCfgEntry 8 }
aclGroupNewCfgMemberAcl6s OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ACL6 members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL6 9
|| ||
|| ||___ ACL6 8
|| |____ ACL6 7
|| . . .
||_________ ACL6 2
|__________ ACL6 1
where x:
1 - the represented ACL6 is a member of the group.
0 - the represented ACL6 is not a member of the group."
::= { aclGroupNewCfgEntry 9 }
aclGroupNewCfgAddAcl6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL6 entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL6 entry in the aclGroupNewCfgMemberAcl6s
bitmap. A value of zero is always returned when this object
is read."
::= { aclGroupNewCfgEntry 10 }
aclGroupNewCfgRemoveAcl6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read."
::= { aclGroupNewCfgEntry 11 }
aclCurCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port acl groups configuration."
::= { aclCfg 1 }
aclCurCfgPortTableEntry OBJECT-TYPE
SYNTAX AclCurCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port acl configuration."
INDEX { aclCurCfgPortIndex }
::= { aclCurCfgPortTable 1 }
AclCurCfgPortTableEntry ::= SEQUENCE {
aclCurCfgPortIndex PortNumber,
aclCurCfgPortAclBmap OCTET STRING
, aclCurCfgPortAclGrpBmap OCTET STRING
, aclCurCfgPortAcl6Bmap OCTET STRING
,aclCurCfgPortAlias DisplayString
}
aclCurCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB."
::= { aclCurCfgPortTableEntry 1 }
aclCurCfgPortAclBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port."
::= { aclCurCfgPortTableEntry 2 }
aclCurCfgPortAclGrpBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acl groups applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port."
::= { aclCurCfgPortTableEntry 4 }
aclCurCfgPortAcl6Bmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 128.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl6 9
|| ||
|| ||___ acl6 8
|| |____ acl6 7
|| . . .
||_________ acl6 2
|__________ acl6 1
where x : 1 - The represented acl6 applied to the port.
0 - The represented acl6 not applied to the port."
::= { aclCurCfgPortTableEntry 13 }
aclCurCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alias of a particular port."
::= { aclCurCfgPortTableEntry 14 }
aclNewCfgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AclNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port acl configuration."
::= { aclCfg 2 }
aclNewCfgPortTableEntry OBJECT-TYPE
SYNTAX AclNewCfgPortTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular port acl groups configuration."
INDEX { aclNewCfgPortIndex }
::= { aclNewCfgPortTable 1 }
AclNewCfgPortTableEntry ::= SEQUENCE {
aclNewCfgPortIndex PortNumber,
aclNewCfgPortAddAcl Unsigned32
, aclNewCfgPortAddAclGrp Unsigned32
, aclNewCfgPortRemoveAcl Unsigned32
, aclNewCfgPortRemoveAclGrp Unsigned32
, aclNewCfgPortAclBmap OCTET STRING
, aclNewCfgPortAclGrpBmap OCTET STRING
, aclNewCfgPortAddAcl6 Unsigned32
, aclNewCfgPortRemoveAcl6 Unsigned32
, aclNewCfgPortAcl6Bmap OCTET STRING
,aclNewCfgPortAlias DisplayString
}
aclNewCfgPortIndex OBJECT-TYPE
SYNTAX PortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB."
::= { aclNewCfgPortTableEntry 1 }
aclNewCfgPortAddAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl to be added to the specified port. A
'0' value is returned when read."
::= {aclNewCfgPortTableEntry 2 }
aclNewCfgPortAddAclGrp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl group to be added to the specified port. A
'0' value is returned when read."
::= {aclNewCfgPortTableEntry 4 }
aclNewCfgPortRemoveAcl OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl to be removed from the specified port.
A '0' value is returned when read."
::= { aclNewCfgPortTableEntry 5 }
aclNewCfgPortRemoveAclGrp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl group to be removed from the specified port.
A '0' value is returned when read."
::= { aclNewCfgPortTableEntry 7 }
aclNewCfgPortAclBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port."
::= { aclNewCfgPortTableEntry 8 }
aclNewCfgPortAclGrpBmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acl groups applied to the port. The acl groups are
presented in bitmap format. This string displays group number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl group applied to the port.
0 - The represented acl group not applied to the port."
::= { aclNewCfgPortTableEntry 10 }
aclNewCfgPortAddAcl6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl6 to be added to the specified port. A
'0' value is returned when read."
::= {aclNewCfgPortTableEntry 11 }
aclNewCfgPortRemoveAcl6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The acl6 to be removed from the specified port.
A '0' value is returned when read."
::= { aclNewCfgPortTableEntry 12 }
aclNewCfgPortAcl6Bmap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The acl6s applied to the port. The acl6s are
presented in bitmap format. This string displays acl number
from 1 to 128.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl6 9
|| ||
|| ||___ acl6 8
|| |____ acl6 7
|| . . .
||_________ acl6 2
|__________ acl6 1
where x : 1 - The represented acl6 applied to the port.
0 - The represented acl6 not applied to the port."
::= { aclNewCfgPortTableEntry 13 }
aclNewCfgPortAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alias of a particular port."
::= { aclNewCfgPortTableEntry 14 }
mAclStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MAclStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of MACL statistics."
::= { aclStats 4 }
mAclStatsTableEntry OBJECT-TYPE
SYNTAX MAclStatsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics about a particular MACL configuration entry."
INDEX { mAclStatsIndex }
::= { mAclStatsTable 1 }
MAclStatsTableEntry ::= SEQUENCE {
mAclStatsIndex Integer32,
mAclStatsHits Counter32,
mAclClearStats INTEGER
}
mAclStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The macl index."
::= { mAclStatsTableEntry 1 }
mAclStatsHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of hits for this MACL entry"
::= { mAclStatsTableEntry 2 }
mAclClearStats OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the stats for the MACL."
::= { mAclStatsTableEntry 3 }
-- ----------------------------------------------------------------------------
-- } INSERT: acl
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: bntRoot
-- ----------------------------------------------------------------------------
-- Access Switch for Blade OS TOR Private MIBs
-- tor-BladeSwitch OBJECT IDENTIFIER ::= { blade 100 }
-- MIB definitions for Standalone BNT Private MIBs
-- Access "productID" group for Common Standalone BNT Private MIBs
ibmnos-BladeSwitch OBJECT IDENTIFIER ::= { ibmnetwork 100 }
ibmnoscfa OBJECT IDENTIFIER ::= { ibmnos-BladeSwitch 27 }
-- ----------------------------------------------------------------------------
-- { INSERT: cfa
-- ----------------------------------------------------------------------------
if OBJECT IDENTIFIER ::= { ibmnoscfa 1 }
-- ifMainTable
-- This table is used for the management of all the interfaces in the
-- system.
ifMainTable OBJECT-TYPE
SYNTAX SEQUENCE OF IfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all the interface entries in the system.
This table contains objects which are applicable to all
types of interfaces in the system. This table is a
proprietary extension to the standard ifTable and
ifXTable. The index to this table has the semantics of
the MIB-2 ifIndex."
::= { if 4 }
ifMainEntry OBJECT-TYPE
SYNTAX IfMainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing management information applicable
to a particular interface."
INDEX { ifMainIndex }
::= { ifMainTable 1 }
IfMainEntry ::=
SEQUENCE {
ifMainIndex InterfaceIndex,
ifMainPortName DisplayString
}
ifMainIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable."
::= { ifMainEntry 1 }
ifMainPortName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is used to assign a alias to a port"
::= { ifMainEntry 9 }
-- ----------------------------------------------------------------------------
-- } INSERT: cfa
-- ----------------------------------------------------------------------------
ibmnos OBJECT IDENTIFIER ::= { ibmnos-BladeSwitch 81 }
-- ----------------------------------------------------------------------------
-- { INSERT: bos
-- ----------------------------------------------------------------------------
-- ====================================================================
-- groups in the MIB
-- ====================================================================
ibmnosSystem OBJECT IDENTIFIER ::= { ibmnos 1 }
ibmnosConfigControl OBJECT IDENTIFIER ::= { ibmnos 2 }
-- ====================================================================
-- System Group
-- Configurtion Save related configuration / information
ibmnosConfigSaveOption OBJECT-TYPE
SYNTAX INTEGER {
noSave(1),
flashSave(2),
remoteTftpSave(3),
startupConfig(4),
backupConfig(5),
remoteTftpRestore(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the configurations of the switch has to be
saved or not.
The value 'noSave' specifies that the configurations need
not be saved.
The value 'flashSave' specifies that the configurations need
to be saved in flash in the specified file name issConfigSaveFileName.
The value 'remoteSave' specifies that the configurations need
to be saved in specified remote system.
The value 'startupConfig' specifies that the configurations need
to be saved in flash in the 'Startup Configuration File'.
The value 'backupConfig' specifies that the configurations need
to be saved in flash in the 'backup Configuration File'.
The value 'remoteTftpRestore' specifies that the configurations need
to be restored from remote system and saved in the file as indicated by
'ibmnosConfigRemoteType'. This configuration are copied to configuration blocks
and applied after restart."
DEFVAL { noSave }
::= { ibmnosSystem 10 }
ibmnosConfigSaveFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the file in which the switch configurations are
to be saved.
This object is valid only if 'issConfigSaveOption' is chosen
to be 'flashSave' or 'remoteSave'."
DEFVAL { "iss.conf" }
::= { ibmnosSystem 12 }
ibmnosInitiateConfigSave OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set as 'true' switch configurations save operation is
initiated.
As soon as the configuration save operation is completed, the value
of this object reverts back to 'false'.
All the configurations made via the three interfaces
viz.
-> commandline interface
-> Web Interface
-> SNMP interface
are saved either in 'Startup Configuration File' in the flash or
in the specified 'issConfigSaveFileName' in the flash or
in the chosen remote system, depending upon 'ConfigSaveOption'."
DEFVAL { false }
::= { ibmnosSystem 13 }
ibmnosConfigSaveStatus OBJECT-TYPE
SYNTAX INTEGER {
saveInProgress(1),
saveSuccessful(2),
saveFailed(3),
notInitiated(4),
saveNotRequired(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of configuration save operation."
DEFVAL { notInitiated }
::= { ibmnosSystem 14 }
ibmnosConfigRestoreOption OBJECT-TYPE
SYNTAX INTEGER {
factory(1),
activeConfig(2),
backupConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether the switch configurations have to be restored
or not.
The value 'factory' specifies that the switch configurations
need not be restored when the system is restarted.
The value 'activeConfig' specifies that the configurations
need to be restored from the 'Startup Configuration File' in the flash
when the system is restarted.
The value 'backupConfig' specifies that the configurations
need to be restored from the 'Backup Configuration File' in the flash
when the system is restarted."
DEFVAL { factory }
::= { ibmnosSystem 15 }
ibmnosLoggingOption OBJECT-TYPE
SYNTAX INTEGER {
console(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Logging option specifying whether the logging is to be
done at console or to a file(system buffer) in the system."
::= { ibmnosSystem 26 }
-- Login Authentication mechanism
ibmnosLoginAuthentication OBJECT-TYPE
SYNTAX INTEGER {
local(1),
remoteRadius(2),
remoteTacacs(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mechanism by which the user login to access the GUI for
configuration has to be authenticated. Authentication is done
either locally or in the remote side through a RADIUS Server."
::= { ibmnosSystem 32 }
ibmnosConfigRestoreFileVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Config Restoration file version. This version will be compared in each
reboot against version stored in restoration file. Restoration
will occur only if the first field in restoration file is this OID and the
RestoreFileVersion value also matches."
::= { ibmnosSystem 40 }
-- Config Control Group
-- Port Control Table
ibmnosPortCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmnosPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table to control the port specific parameters of the device like speed,
duplex mode, etc."
::= { ibmnosConfigControl 2 }
ibmnosPortCtrlEntry OBJECT-TYPE
SYNTAX IbmnosPortCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry appears in this table for each interface in the system.
Index to the table is the interface index of the port."
INDEX { ibmnosPortCtrlIndex }
::= { ibmnosPortCtrlTable 1 }
IbmnosPortCtrlEntry ::=
SEQUENCE {
ibmnosPortCtrlIndex
Integer32,
ibmnosPortCtrlMode
INTEGER,
ibmnosPortCtrlDuplex
INTEGER,
ibmnosPortCtrlSpeed
INTEGER,
ibmnosPortCtrlFlowControl
INTEGER
,ibmnosPortCtrlAlias
DisplayString
}
ibmnosPortCtrlIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Interface index of the port for which the configuration
in this entry applies."
::= { ibmnosPortCtrlEntry 1 }
ibmnosPortCtrlMode OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
noNegotiation (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Speficies the mode in which the speed, duplex modes and flow control
of the interface is determined.
If set as 'auto', the hardware senses speed and negotiates with the port
on the other end of the link for data transfer operation as
'full-duplex' or 'half-duplex' and about flow contol.
If set as 'nonegotiation', the configured values for interface
speed, duplex mode and flow control will be effective."
DEFVAL { auto }
::= { ibmnosPortCtrlEntry 2 }
ibmnosPortCtrlDuplex OBJECT-TYPE
SYNTAX INTEGER {
full (1),
half (2),
any (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface data transfer mode as full-duplex or half-duplex.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'"
::= { ibmnosPortCtrlEntry 3 }
ibmnosPortCtrlSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenMBPS (1),
hundredMBPS (2),
oneGB (3),
tenGB (4),
any (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures interface speed.
This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value 'any'"
::= { ibmnosPortCtrlEntry 4 }
ibmnosPortCtrlFlowControl OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2),
send (3),
receive (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables / disables flow control for the interface.
This object be configured only if the 'PortCtrlMode' is 'nonegotiation'.
If the 'PortCtrlMode' is 'auto', it obtains the value from Hardware
after negotiating with its peer"
::= { ibmnosPortCtrlEntry 5 }
ibmnosPortCtrlAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port alias."
::= { ibmnosPortCtrlEntry 10 }
-- ----------------------------------------------------------------------------
-- } INSERT: bos
-- ----------------------------------------------------------------------------
toraddon OBJECT IDENTIFIER ::= { ibmnos-BladeSwitch
100
}
-- ----------------------------------------------------------------------------
-- { INSERT: toraddon
-- ----------------------------------------------------------------------------
-- Module Group
--vlan OBJECT IDENTIFIER ::= { toraddon 1 }
cfa OBJECT IDENTIFIER ::= { toraddon 2 }
sys OBJECT IDENTIFIER ::= { toraddon 7 }
ibmnosFdb OBJECT IDENTIFIER ::= { toraddon 13 }
tor-switch OBJECT IDENTIFIER ::= { toraddon 14 }
ibmnosBladeHarmony OBJECT IDENTIFIER ::= { toraddon
17
}
-- Blade Harmony Wrapper Objects (bosBladeHarmony)
dataCollection OBJECT IDENTIFIER ::= { ibmnosBladeHarmony 1 }
imageConfigTransfer OBJECT IDENTIFIER ::= { ibmnosBladeHarmony 3 }
ibmnosFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmnosFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of FDB entries."
::= { ibmnosFdb 5 }
ibmnosFdbEntry OBJECT-TYPE
SYNTAX IbmnosFdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the FDB table"
INDEX { ibmnosFdbVlan, ibmnosFdbMacAddr }
::= { ibmnosFdbTable 1 }
IbmnosFdbEntry ::= SEQUENCE {
ibmnosFdbVlan Integer32,
ibmnosFdbMacAddr PhysAddress,
ibmnosFdbMacAddrStr DisplayString,
ibmnosFdbVlanId Integer32,
ibmnosFdbSrcPort Integer32,
ibmnosFdbSrcTrunk Integer32,
ibmnosFdbState INTEGER,
ibmnosFdbStatus Integer32,
ibmnosFdbClearMac INTEGER
}
ibmnosFdbVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry."
::= { ibmnosFdbEntry 1 }
ibmnosFdbMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address for the FDB entry."
::= { ibmnosFdbEntry 2 }
ibmnosFdbMacAddrStr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address in hex format for the FDB entry. This node is added for
display purpose."
::={ ibmnosFdbEntry 3 }
ibmnosFdbVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VLAN ID for the FDB entry. This node is added for display purpose."
::= { ibmnosFdbEntry 4 }
ibmnosFdbSrcPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address."
::= { ibmnosFdbEntry 5 }
ibmnosFdbSrcTrunk OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk."
::= { ibmnosFdbEntry 6 }
ibmnosFdbState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
forward(2),
trunk(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
group"
::= { ibmnosFdbEntry 7 }
ibmnosFdbStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"'1' if it is permanent
'0' if it is not permanent"
::= { ibmnosFdbEntry 10 }
ibmnosFdbClearMac OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to clear(2) clears the corresponding table entry in FDB."
::= { ibmnosFdbEntry 11 }
-- Interface mangager(CFA) objects
ibmnosPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmnosPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of port configuration in the new_configuration block."
::= { cfa 1 }
ibmnosPortCfgTableEntry OBJECT-TYPE
SYNTAX IbmnosPortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the port configuration table in the new_configuration block."
INDEX {ibmnosPortCfgIndx }
::= {ibmnosPortCfgTable 1 }
IbmnosPortCfgTableEntry ::= SEQUENCE {
ibmnosPortCfgIndx Integer32,
ibmnosPortCfgVlanTag INTEGER
}
ibmnosPortCfgIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the row in port configurations table."
::= { ibmnosPortCfgTableEntry 1 }
ibmnosPortCfgVlanTag OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN tag configured for the port"
::= { ibmnosPortCfgTableEntry 2 }
agImageForNextReset OBJECT-TYPE
SYNTAX INTEGER{
image1(2),
image2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2"
::= { sys 2 }
--- Switch Objects
hardwarePartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware part number of the Blade Switch.
"
::= { tor-switch 1 }
hardwareLastBoot OBJECT-TYPE
SYNTAX INTEGER {
unkownReason(0),
powerCycle(1),
resetFromConsole(2),
resetFromTelnetOrSSH(3),
resetFromSNMP(4),
resetFromWEBUI(5),
resetFromScheduled(6),
resetFromWatchdogTimer(7),
resetFromSWPANIC(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason of the last boot.
"
::= { tor-switch 3 }
hardwareMACAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address.
"
::= { tor-switch 4 }
hardwareSwitchRunningSwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch software version.
"
::= { tor-switch 5 }
hardwareFlashConfiguration OBJECT-TYPE
SYNTAX INTEGER {
factory(0),
active(1),
backup(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active flash configuration.
"
::= { tor-switch 6 }
hardwareSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch serial number.
"
::= { tor-switch 9 }
hardwareManufacturingDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of manufacturing.
"
::= { tor-switch 10 }
hwTemperatureSensor1 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 1.
"
::= { tor-switch 11 }
hwTemperatureSensor2 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 2.
"
::= { tor-switch 12 }
hwTemperatureSensor3 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 3.
"
::= { tor-switch 13 }
hwFan1RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 1 RPM value.
"
::= { tor-switch 14 }
hwFan2RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 2 RPM value.
"
::= { tor-switch 15 }
hwFan3RPMValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fan 3 RPM value.
"
::= { tor-switch 16 }
hwPowerSupply1State OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
absent(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Power Supply 1 state.
"
::= { tor-switch 20 }
hwPowerSupply2State OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1),
absent(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Power Supply 2 state.
"
::= { tor-switch 21 }
ibmnosSfpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF IbmnosSfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of external port SFP information."
::= { tor-switch 22 }
ibmnosSfpInfoTableEntry OBJECT-TYPE
SYNTAX IbmnosSfpInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the external port SFP information table."
INDEX { ibmnosSfpInfoIndx }
::= { ibmnosSfpInfoTable 1 }
IbmnosSfpInfoTableEntry ::= SEQUENCE {
ibmnosSfpInfoIndx Integer32,
ibmnosSfpInfoDescription INTEGER,
ibmnosSfpInfoSerialNumber DisplayString,
ibmnosSfpInfoPartNumber DisplayString,
ibmnosSfpInfoHWRevision DisplayString
}
ibmnosSfpInfoIndx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sfp Info index (port number)"
::= { ibmnosSfpInfoTableEntry 1 }
ibmnosSfpInfoDescription OBJECT-TYPE
SYNTAX INTEGER {
none(0),
sfp(1),
cx4(2),
sfpplus(3),
dac(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type Ethernet device (None(0), SFP(1), CX4(2), SFPplus(3), DAC(6))"
::= { ibmnosSfpInfoTableEntry 2 }
ibmnosSfpInfoSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number."
::= { ibmnosSfpInfoTableEntry 3 }
ibmnosSfpInfoPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Part Number."
::= { ibmnosSfpInfoTableEntry 4 }
ibmnosSfpInfoHWRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware Revision"
::= { ibmnosSfpInfoTableEntry 5 }
swImage1Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software image1 version
"
::= { tor-switch 24 }
swImage2Version OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software image2 version
"
::= { tor-switch 25 }
swBootVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software boot version
"
::= { tor-switch 26 }
hwTemperatureSensor4 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 4.
"
::= { tor-switch 32 }
hwTemperatureSensor5 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 5.
"
::= { tor-switch 33 }
hwTemperatureSensor6 OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature sensor 4.
"
::= { tor-switch 34 }
hwBootTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware system boot time .
"
::= { tor-switch 42 }
-- Similar to ifAvailableIndex
ibmnosPortTableMaxEnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of rows in the port configuration host table."
::= { dataCollection 1 }
-- Similar to swImage1Version
ibmnosImage1Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { dataCollection 3 }
-- Similar to swImage2Version
ibmnosImage2Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image."
::= { dataCollection 4 }
hwSwitchSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch software version."
::= { dataCollection 5 }
-- Similar to hwSerialNumber
hwSerialNum OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The switch serial number.
"
::= { dataCollection 6 }
-- Already addedd with different data type.
--hwLastBoot OBJECT-TYPE
-- SYNTAX DisplayString (SIZE(0..48))
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Time and reason of the last boot."
-- ::= { ibmnosBladeHarmony 7}
hwManufacturingDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of manufacturing.
"
::= { dataCollection 7 }
-- Similar to issRestart
ibmnosReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is an action object to reboot the agent.
other(1) is returned always when read."
::= { dataCollection 8 }
-- Similar to swBootVersion
ibmnosBootVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available."
::= { dataCollection 9 }
--Similar to ibmnosConfigRestoreOption
ibmnosConfigForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
active(2),
backup(3),
default(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block"
::= { dataCollection 10 }
ibmnosSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available."
::= { dataCollection 11 }
agTftpServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The TFTP server IP address or domain name."
::= { imageConfigTransfer 1 }
-- ----------------------------------------------------------------------------
-- } INSERT: g8000
-- ----------------------------------------------------------------------------
-- ----------------------------------------------------------------------------
-- } INSERT: blade
-- ----------------------------------------------------------------------------
END
View Git Blame Copy Permalink