1572 lines
45 KiB
Plaintext
1572 lines
45 KiB
Plaintext
--
|
|
-- HUAWEI-WLAN-SYS-MIB.my
|
|
-- MIB generated by MG-SOFT Visual MIB Builder Version 4.0 Build 341
|
|
-- Tuesday, February 19, 2013 at 16:55:09
|
|
--
|
|
|
|
-- HUAWEI-WLAN-SYS-MIB.my
|
|
-- MIB generated by MG-SOFT Visual MIB Builder Version 4.0 Build 341
|
|
-- Thursday, March 08, 2012 at 16:18:52
|
|
--
|
|
-- HUAWEI-WLAN-SYS-MIB.mib
|
|
-- MIB generated by MG-SOFT Visual MIB Builder Version 4.0 Build 341
|
|
-- Thursday, November 24, 2011 at 22:43:06
|
|
--
|
|
-- ============================================================================
|
|
-- Copyright (C) 2014 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
-- Description: The mib is used for config the ac in global view.
|
|
-- Reference:HUAWEI-WLAN-MIB
|
|
-- Version: V1.06
|
|
--
|
|
-- ============================================================================
|
|
|
|
HUAWEI-WLAN-SYS-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
hwWlan
|
|
FROM HUAWEI-WLAN-MIB
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
IpAddress, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI;
|
|
|
|
|
|
-- Revision history
|
|
-- 1.3.6.1.4.1.2011.6.139.1
|
|
-- November 10, 2010 at 00:00 GMT
|
|
-- June 08, 2010 at 00:00 GMT
|
|
-- July 06, 2010 at 00:00 GMT
|
|
-- September 10, 2010 at 00:00 GMT
|
|
-- September 15, 2010 at 00:00 GMT
|
|
-- September 27, 2010 at 00:00 GMT
|
|
-- November 01, 2010 at 00:00 GMT
|
|
-- 1.3.6.1.4.1.2011.6.139.1
|
|
-- November 10, 2010 at 00:00 GMT
|
|
-- November 01, 2010 at 00:00 GMT
|
|
-- September 27, 2010 at 00:00 GMT
|
|
-- September 15, 2010 at 00:00 GMT
|
|
-- September 10, 2010 at 00:00 GMT
|
|
-- July 06, 2010 at 00:00 GMT
|
|
-- June 08, 2010 at 00:00 GMT
|
|
-- 1.3.6.1.4.1.2011.6.139.1
|
|
hwWlanSysManagement MODULE-IDENTITY
|
|
LAST-UPDATED "201410231600Z" -- Oct 23, 2014 at 16:00 GMT
|
|
ORGANIZATION
|
|
"Huawei Technologies Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com "
|
|
|
|
DESCRIPTION
|
|
"add table of hwWlanStaIpv6Switch,and notes for sta ipv6 service."
|
|
REVISION "201410231600Z" -- Oct 23, 2014 at 16:00 GMT
|
|
|
|
DESCRIPTION
|
|
"add table of hwWlanInterAcManagement,and notes for inter-ac dtls."
|
|
REVISION "201403211600Z" -- March 21, 2014 at 16:00 GMT
|
|
|
|
DESCRIPTION
|
|
"add node of hwWlanAcSourceIPv4Address for table hwWlanAcSourceInterface."
|
|
REVISION "201312200958Z" -- Dec 20, 2013 at 09:58 GMT
|
|
|
|
DESCRIPTION
|
|
"The MIB module defines the ap update operation."
|
|
REVISION "201311121016Z" -- Nov 12, 2013 at 10:16 GMT
|
|
|
|
DESCRIPTION
|
|
"add node of 80M for table hwWlanConfigChannel"
|
|
REVISION "201311121016Z" -- Nov 12, 2013 at 10:16 GMT
|
|
|
|
DESCRIPTION
|
|
"add node of 80M for table hwWlanConfigChannel"
|
|
|
|
REVISION "201310231722Z" -- October 23, 2013 at 17:22 GMT
|
|
DESCRIPTION
|
|
"
|
|
V1.07, Add for v2r5.
|
|
"
|
|
|
|
REVISION "201305230000Z" -- May 23, 2013 at 00:00 GMT
|
|
DESCRIPTION
|
|
"
|
|
V1.06, Add for wifi location and spectrum analysis.
|
|
"
|
|
|
|
REVISION "201011010000Z" -- November 01, 2010 at 00:00 GMT
|
|
DESCRIPTION
|
|
"
|
|
V1.05, Add hwWlanAcProtectIpAddress for IP address of the backup AC,
|
|
Add hwWlanAcProtectPriority for Dual-link hot backup priorities,
|
|
Add hwWlanAcProtectSwitch for Dual-link hot backup switch.
|
|
"
|
|
|
|
REVISION "201009270000Z" -- September 27, 2010 at 00:00 GMT
|
|
DESCRIPTION
|
|
"
|
|
V1.04, Add hwWlanCapwapConfig for supportting configuration of CAPWAP parameter.
|
|
Add hwWlanCapwapKeepAliveInterval for supportting configuration of CAPWAP keep-alive interval, in seconds.
|
|
Add hwWlanCapwapKeepAliveTimes for supportting configuration of CAPWAP keep-alive times.
|
|
hwWlanCarrierId add a enum 'other'.
|
|
Add batch query function.
|
|
Add hwWlanAcCapwapControlPacketPriority for ac's priority value of CAPWAP control packet.
|
|
Add hwWlanApCapwapControlPacketPriority for ap's priority value of CAPWAP control packet.
|
|
"
|
|
|
|
REVISION "201009150000Z" -- September 15, 2010 at 00:00 GMT
|
|
DESCRIPTION
|
|
"
|
|
V1.03, Add hwWlanBatchQuery for the supporting batch query.
|
|
"
|
|
|
|
REVISION "201009100000Z" -- September 10, 2010 at 00:00 GMT
|
|
DESCRIPTION
|
|
"
|
|
V1.02, Add hwWlanAcSourceInterface for the supporting configuration of wlan ac source interface.
|
|
"
|
|
|
|
REVISION "201007060000Z" -- July 06, 2010 at 00:00 GMT
|
|
DESCRIPTION
|
|
"
|
|
V1.01, Add trap restrain.
|
|
"
|
|
|
|
REVISION "201006080000Z" -- June 08, 2010 at 00:00 GMT
|
|
DESCRIPTION
|
|
"
|
|
V1.00, Inital version.
|
|
"
|
|
::= { hwWlan 1 }
|
|
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
-- Node definitions
|
|
--
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1
|
|
hwWlanTrapRestrain OBJECT IDENTIFIER ::= { hwWlanSysManagement 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.1
|
|
hwWlanTrapRestrainAll OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"All wlan trap restrain switch. If this switch is enabled, all the traps on ac will not be sent."
|
|
::= { hwWlanTrapRestrain 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.2
|
|
hwWlanTrapSeverityRestrain OBJECT IDENTIFIER ::= { hwWlanTrapRestrain 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.2.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.2.1
|
|
hwWlanTrapSeverityRestrainSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
critical(1),
|
|
major(2),
|
|
minor(3),
|
|
warning(4),
|
|
none(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wlan trap restrain by severity.
|
|
critical: means the trap whose severity is not higner than critical will not be sent.
|
|
major: means the trap whose severity is not higner than major will not be sent.
|
|
minor: means the trap whose severity is not higner than minor will not be sent.
|
|
warning: means the trap whose severity is not higner than warning will not be sent.
|
|
none: means all the severities of traps can be sent."
|
|
::= { hwWlanTrapSeverityRestrain 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.3
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.3
|
|
hwWlanApRegionTrapRestrain OBJECT IDENTIFIER ::= { hwWlanTrapRestrain 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.3.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.3.1
|
|
hwWlanApRegionTrapRestrainRegionIndexMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wlan trap restrain by ap region.
|
|
Every bit is used to describe the region's trap will be restrained or not.
|
|
0 means not restrain, and 1 means restrain.
|
|
Each Byte describes 8 regions are restrained or not.
|
|
The value of this node is hexadecimal integer block.
|
|
For example, the first Byte describes region 0~7 is restrained or not,
|
|
and the second Byte describes region 8~15 is restrained or not.
|
|
Such as, if only region 0,4,5,6,7,9 is restrain, the binary number is 11110001 and 00000010,
|
|
the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1,
|
|
and the second Byte is 0x2."
|
|
::= { hwWlanApRegionTrapRestrain 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.4
|
|
hwWlanApTrapRestrain OBJECT IDENTIFIER ::= { hwWlanTrapRestrain 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.4.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.1.4.1
|
|
hwWlanApTrapRestrainApIndexMask OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wlan trap restrain by ap.
|
|
Every bit is used to describe the ap's trap will be restrained or not.
|
|
0 means not restrain, and 1 means restrain.
|
|
Each Byte describes 8 aps are restrained or not.
|
|
The value of this node is hexadecimal integer block.
|
|
For example, the first Byte describes ap 0~7 is restrained or not,
|
|
and the second Byte describes ap 8~15 is restrained or not.
|
|
Such as, if only ap 0,4,5,6,7,9 is restrain, the binary number is 11110001 and 00000010,
|
|
the hexadecimal number is 0xF1 and 0x2, so the first Byte of this node is 0xF1,
|
|
and the second Byte is 0x2."
|
|
::= { hwWlanApTrapRestrain 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2
|
|
hwWlanSysPara OBJECT IDENTIFIER ::= { hwWlanSysManagement 2 }
|
|
|
|
|
|
-- China mobile
|
|
-- China telecom
|
|
-- China unicom
|
|
-- Other company
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.1
|
|
hwWlanCarrierId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
cmcc(1),
|
|
ctc(2),
|
|
cuc(3),
|
|
other(65535)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The carrier identification.
|
|
cmcc means 'China mobile communications corporation' ,
|
|
ctc means 'China telecom company' ,
|
|
cuc means 'China unicom company',
|
|
other means 'Other company',
|
|
"
|
|
::= { hwWlanSysPara 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.2
|
|
hwWlanAcId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ac identification.
|
|
The carrier must set ac id and carrier id before use.
|
|
In this case, APs can check each other whether blong to a same AC.
|
|
"
|
|
::= { hwWlanSysPara 2 }
|
|
|
|
|
|
-- ess mode
|
|
-- ap mode
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.3
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.3
|
|
hwWlanForwardMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ess(1),
|
|
ap(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AC forward mode.It can be set
|
|
ess(1): ess mode
|
|
ap(2): ap mode
|
|
"
|
|
::= { hwWlanSysPara 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.4
|
|
hwWlanAcNEnumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.5
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.5
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.5
|
|
hwWlanAcAccessMaxApNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.6
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.6
|
|
hwAcCountryCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.8
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.8
|
|
hwWlanApUsername OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: When set, need to together with password, and the username length is 4 to 31 characters."
|
|
::= { hwWlanSysPara 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.9
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.9
|
|
hwWlanApPassword OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: When set, need to together with username, and the password length is 8 to 32 characters which must contain at least one capital letter,
|
|
one lowcase letter and one number."
|
|
::= { hwWlanSysPara 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.10
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.10
|
|
hwWlanUsernamePasswordApId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: The node is useful only when get the username or password and must be set first and read with username or password.
|
|
When get the username or password without the node ,it means get the gloable configuration from AC, otherwise, it means
|
|
get the specified AP' username or password from AP. For when change the username or password,and not commit, the AC's
|
|
configuration is diffrent with AP' real configuration.
|
|
When specified the AP ID , and the AP is not in the normal state, return the username or password from AC's gloable configuration."
|
|
::= { hwWlanSysPara 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.11
|
|
hwWlanApLldpSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description: Global AP LLDP switch."
|
|
::= { hwWlanSysPara 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.12
|
|
hwWlanAcAccessMaxStaNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.13
|
|
hwWlanAcDtlsSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 13 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.14
|
|
hwWlanAcDtlsPsk OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 14 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.15
|
|
hwWlanApLogManualBackupApId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 15 }
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.16
|
|
hwWlanAcDtlsDefaultPskSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 16 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.17
|
|
hwWlanWorkMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ac(1),
|
|
ap(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 17 }
|
|
|
|
hwWlanIpv6Enable OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 18 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.19
|
|
hwWlanInterAcDtlsEncrpyt OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 19 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.20
|
|
hwWlanInterAcDtlsPsk OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysPara 20 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.2.21
|
|
hwWlanStaIpv6Switch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether to process IPv6 services of STAs."
|
|
DEFVAL { 2 }
|
|
::= { hwWlanSysPara 21 }
|
|
-- 1.3.6.1.4.1.2011.6.139.1.3
|
|
-- 1.3.6.1.4.1.2011.6.139.1.3
|
|
-- 1.3.6.1.4.1.2011.6.139.1.3
|
|
hwWlanAcSourceInterface OBJECT IDENTIFIER ::= { hwWlanSysManagement 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.3.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.3.1
|
|
hwWlanAcSourceInterfaceValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the value of wlan ac source interface.
|
|
"
|
|
::= { hwWlanAcSourceInterface 1 }
|
|
|
|
|
|
-- default setting
|
|
-- vlanif interface
|
|
-- loopback interface
|
|
-- 1.3.6.1.4.1.2011.6.139.1.3.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.3.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.3.2
|
|
hwWlanAcSourceInterfaceMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
default(1),
|
|
vlanif(2),
|
|
loopback(3),
|
|
ipaddress(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"operation method of wlan ac source interface.It can be set
|
|
default(1): use default setting
|
|
vlanif(2): use vlanif interface
|
|
loopback(3): use loopback interface
|
|
ipaddress(4):user ip address
|
|
"
|
|
::= { hwWlanAcSourceInterface 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.3.3
|
|
hwWlanAcSourceIPv4Address OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanAcSourceInterface 3 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4
|
|
hwWlanBatchQuery OBJECT IDENTIFIER ::= { hwWlanSysManagement 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.1
|
|
hwWlanBatchQueryType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
apProfName(1),
|
|
apWhiteListMac(2),
|
|
apWhiteListSn(3),
|
|
apBlackListMac(4),
|
|
apBlackListSn(5),
|
|
apRegionId(6),
|
|
apRegionIdModeName(7),
|
|
apId(8),
|
|
apIdState(9),
|
|
apIdStateRegionName(10),
|
|
unauthApIdMac(11),
|
|
radioProfName(12),
|
|
radioBalanceGroupName(13),
|
|
uncontrolApIdBssidAuthApId(14),
|
|
essNameSsid(15),
|
|
wmmProfName(16),
|
|
trafficProfName(17),
|
|
secProfName(18),
|
|
authMacStateType(19),
|
|
clear(65535)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data type of Batch query. For example, apProfName(1) can be used to get ap-profile-name list.
|
|
The batch query support two modes, the number mode and the ID list mode, binding the node hwWlanBatchRequestNum and
|
|
hwWlanBatchStartCount means use the number mode, binding the node hwWlanBatchRequestIdList, hwWlanBatchRequestIdSize
|
|
hwWlanBatchRequestIdNum means use the ID list mode.
|
|
"
|
|
::= { hwWlanBatchQuery 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.2
|
|
hwWlanBatchRequestNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The request number of the batch query, it used in number mode. This node must be set in company with
|
|
the node hwWlanBatchStartCount. For example, there are 6 ap-profiles(0 1 3 5 6 9) in the AC, Set hwWlanBatchQuery
|
|
to apProfName(1), set hwWlanBatchRequestNum to 3, and set hwWlanBatchStartCount to 2, then get the node
|
|
hwWlanBatchValueList and hwWlanBatchReturnNum, that means start from the 2nd ap-profile, get 3 ap-profile-names,
|
|
the result in hwWlanBatchValueList are ap-profile(3 5 6 9).
|
|
"
|
|
::= { hwWlanBatchQuery 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.3
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.3
|
|
hwWlanBatchStartCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start count of the batch query, it used in number mode. This node must be set in company with
|
|
the node hwWlanBatchRequestNum. For example, there are 6 ap-profiles(0 1 3 5 6 9) in the AC, Set hwWlanBatchQuery
|
|
to apProfName(1), set hwWlanBatchRequestNum to 3, and set hwWlanBatchStartCount to 2, then get the node
|
|
hwWlanBatchValueList and hwWlanBatchReturnNum, that means start from the 2nd ap-profile, get 3 ap-profile-names,
|
|
the result in hwWlanBatchValueList are ap-profile(3 5 6 9)."
|
|
::= { hwWlanBatchQuery 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.4
|
|
hwWlanBatchRequestIdList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..2048))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID list of the data type, It used in ID list mode. This node must be set in company with
|
|
the node hwWlanBatchRequestIdSize and hwWlanBatchRequestIdNum. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC,
|
|
set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3),
|
|
set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList
|
|
and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3)"
|
|
::= { hwWlanBatchQuery 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.5
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.5
|
|
hwWlanBatchRequestIdSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of a batch query ID element, it used in ID list mode. This node must be set in company with
|
|
the node hwWlanBatchRequestIdList and hwWlanBatchRequestIdNum. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC,
|
|
set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3),
|
|
set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList
|
|
and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3)"
|
|
::= { hwWlanBatchQuery 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.6
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.6
|
|
hwWlanBatchRequestIdNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of batch query by id, it used in ID list mode. This node must be set in company with
|
|
the node hwWlanBatchRequestIdList and hwWlanBatchRequestIdSize. For example, Ther are 6 apid(0 1 3 4 5 6) int the AC,
|
|
set hwWlanBatchQuery to apIdStateRegionName(10), set hwWlanBatchRequestIdList to #0x00 0x01 0x00 0x02 0x00 0x03 (ap1 ap2 ap3),
|
|
set hwWlanBatchRequestIdSize to 2(bytes), and set hwWlanBatchRequestIdNum to 3, then get the node hwWlanBatchValueList
|
|
and hwWlanBatchReturnNum. The result in hwWlanBatchValueList are apids(1 2 3)"
|
|
::= { hwWlanBatchQuery 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.7
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.7
|
|
hwWlanBatchValueList OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..6144))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The returned value list. If the value ended by a string, each value is divided by '?', otherwise , each value
|
|
will have a fixed length. This node must be get in company with the node hwWlanBatchReturnNum."
|
|
::= { hwWlanBatchQuery 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.8
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.8
|
|
hwWlanBatchReturnNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successful query. This node must be get in company with the node hwWlanBatchValueList."
|
|
::= { hwWlanBatchQuery 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.9
|
|
-- 1.3.6.1.4.1.2011.6.139.1.4.9
|
|
hwWlanBatchTotalNum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of current batch query. For example, There are 10 ap-Profiles in the AC,
|
|
the value of this node will be 10."
|
|
::= { hwWlanBatchQuery 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.5
|
|
-- 1.3.6.1.4.1.2011.6.139.1.5
|
|
hwWlanCapwapConfig OBJECT IDENTIFIER ::= { hwWlanSysManagement 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.5.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.5.1
|
|
hwWlanCapwapKeepAliveInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The interval of maintain freshness of the CAPWAP channel, in seconds.
|
|
"
|
|
::= { hwWlanCapwapConfig 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.5.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.5.2
|
|
hwWlanCapwapKeepAliveTimes OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The times of maintain freshness of the CAPWAP channel before it timeout.
|
|
"
|
|
::= { hwWlanCapwapConfig 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.5.3
|
|
-- 1.3.6.1.4.1.2011.6.139.1.5.3
|
|
hwWlanCapwapControlPriorityACToAP OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
the ac's priority value of CAPWAP control packet,includ cos and tos,
|
|
ranging between 0 and 7.
|
|
"
|
|
::= { hwWlanCapwapConfig 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.5.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.5.4
|
|
hwWlanCapwapControlPriorityAPToAC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
the ap's priority value of CAPWAP control packet,includ tos,
|
|
ranging between 0 and 7.
|
|
"
|
|
::= { hwWlanCapwapConfig 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6
|
|
hwWlanAcProtect OBJECT IDENTIFIER ::= { hwWlanSysManagement 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.1
|
|
hwWlanAcProtectIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the backup AC."
|
|
::= { hwWlanAcProtect 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.2
|
|
hwWlanAcProtectPriority OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dual-link hot backup priorities."
|
|
::= { hwWlanAcProtect 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.3
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.3
|
|
hwWlanAcProtectSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Dual-link hot backup switch."
|
|
::= { hwWlanAcProtect 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.4
|
|
hwWlanAcProtectRestoreSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanAcProtect 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.5
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.5
|
|
hwUndoWlanAcProtectIpAddress OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanAcProtect 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.6
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.6
|
|
hwUndoWlanAcProtectPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanAcProtect 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.6.7
|
|
hwWlanAcProtectIpv6Address OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..46))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanAcProtect 7 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7
|
|
hwWlanConfigChannel OBJECT IDENTIFIER ::= { hwWlanSysManagement 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.1
|
|
hwWlan24G20MconfigChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanConfigChannel 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.2
|
|
hwWlan24G40MPlusConfigChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanConfigChannel 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.3
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.3
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.3
|
|
hwWlan24G40MMinusConfigChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanConfigChannel 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.4
|
|
hwWlan5G20MConfigChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanConfigChannel 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.5
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.5
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.5
|
|
hwWlan5G40MPlusConfigChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanConfigChannel 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.6
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.6
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.6
|
|
hwWlan5G40MMinusConfigChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanConfigChannel 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.7
|
|
hwWlanConfigChannelApId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ap index, is used to identify AP uniquely.Query the configurable channel of the ap must contain apid otherwise query are global configurable channel."
|
|
::= { hwWlanConfigChannel 7 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.8
|
|
hwWlan24G80MConfigChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanConfigChannel 8 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.7.9
|
|
hwWlan5G80MConfigChannel OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanConfigChannel 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.8
|
|
hwWlanStaLoadbalance OBJECT IDENTIFIER ::= { hwWlanSysManagement 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.8.1
|
|
hwWlanStaLoadbalanceEnable OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanStaLoadbalance 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.8.2
|
|
hwWlanStaLoadbalanceMode OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanStaLoadbalance 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.8.3
|
|
hwWlanStaLoadbalanceSessionGap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanStaLoadbalance 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.8.4
|
|
hwWlanStaLoadbalanceTrafficGap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanStaLoadbalance 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.8.5
|
|
hwWlanStaLoadbalanceAssociateThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanStaLoadbalance 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.9
|
|
hwWlanHsbConfig OBJECT IDENTIFIER ::= { hwWlanSysManagement 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.9.1
|
|
hwWlanHsbServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(1),
|
|
hsbGroup(2),
|
|
hsbService(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hsb service type can be one of the three values: 1, 2, 3 (1: disable(1) 2: hsbGroup(2) 3: hsbService(3)).
|
|
The default value of this node is 1."
|
|
::= { hwWlanHsbConfig 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.9.2
|
|
hwWlanHsbGroupId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The id of the hsb group used. When hsb service type is disabled, the value of this node is 0xFFFFFFFF."
|
|
::= { hwWlanHsbConfig 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.9.3
|
|
hwWlanHsbTunnelId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The id of the hsb tunnel used. When hsb service type is disabled, the value of this node is 0xFFFFFFFF."
|
|
::= { hwWlanHsbConfig 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.10
|
|
hwWlanLocation OBJECT IDENTIFIER ::= { hwWlanSysManagement 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.10.1
|
|
hwWlanLocationServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLocation 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.10.2
|
|
hwWlanLocationServerPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLocation 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.10.3
|
|
hwWlanLocationSourceIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLocation 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.10.4
|
|
hwWlanLocationApReportToAC OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLocation 4 }
|
|
hwWlanLocationApReportToServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLocation 5 }
|
|
-- 1.3.6.1.4.1.2011.6.139.1.10.6
|
|
hwWlanLocationApReportToUdpPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLocation 6 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.10.7
|
|
hwWlanLocationApReportToIpv6Addr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..46))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLocation 7 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.10.8
|
|
hwWlanLocationAcReportToIpv6Addr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..46))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLocation 8 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.11
|
|
hwWlanSpectrumAnalysis OBJECT IDENTIFIER ::= { hwWlanSysManagement 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.11.1
|
|
hwWlanSpectrumAnalysisServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSpectrumAnalysis 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.11.2
|
|
hwWlanSpectrumAnalysisServerPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSpectrumAnalysis 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.11.3
|
|
hwWlanNonWifiDeviceAgeTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSpectrumAnalysis 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.11.4
|
|
hwWlanSpectrogramServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSpectrumAnalysis 4 }
|
|
-- 1.3.6.1.4.1.2011.6.139.1.11.5
|
|
hwWlanSpectrogramServerPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSpectrumAnalysis 5 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.11.6
|
|
hwWlanSpectrumAnalysisServerIPv6Addr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..46))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSpectrumAnalysis 6 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.11.7
|
|
hwWlanSpectrogramServerIPv6Addr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..46))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSpectrumAnalysis 7 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12
|
|
hwWlanSysManagementObjects OBJECT IDENTIFIER ::= { hwWlanSysManagement 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1
|
|
hwWlanLBSConfig OBJECT IDENTIFIER ::= { hwWlanSysManagementObjects 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.1
|
|
hwWlanLBSAeServerPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.2
|
|
hwWlanLBSAeApReportMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
toAc(2),
|
|
toServer(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.3
|
|
hwWlanLBSAeApReportPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.4
|
|
hwWlanLBSEkServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.5
|
|
hwWlanLBSEkServerPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.6
|
|
hwWlanLBSEkApReportMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
off(1),
|
|
toAc(2),
|
|
toServer(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.7
|
|
hwWlanLBSEkApReportIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.8
|
|
hwWlanLBSEkApReportPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.9
|
|
hwWlanLBSSourceIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 9 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.10
|
|
hwWlanLBSAeCompoundTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compound Time of AeroScout Tag Message"
|
|
::= { hwWlanLBSConfig 10 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.11
|
|
hwWlanLBSEkServerIpv6Addr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..46))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 11 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.12
|
|
hwWlanLBSEkApReportIpv6Addr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..46))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 12 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.12.1.13
|
|
hwWlanLBSSourceIpv6Addr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..46))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanLBSConfig 13 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13
|
|
hwInterAcManagement OBJECT IDENTIFIER ::= { hwWlanSysManagement 13 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.1
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.1
|
|
hwMasterControllerSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwInterAcManagement 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2
|
|
hwConnectMasterControllerSwitch OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disconnect(1),
|
|
connect(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwInterAcManagement 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.3
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.3
|
|
hwConnectMasterControllerIPv4Address OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwInterAcManagement 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.4
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.4
|
|
hwConnectMasterControllerIPv6Address OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwInterAcManagement 4 }
|
|
|
|
hwWlanSysManagementConformance OBJECT IDENTIFIER ::= { hwWlanSysManagement 14 }
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.1
|
|
hwWlanSysManagementCompliances OBJECT IDENTIFIER ::= { hwWlanSysManagementConformance 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.1.1
|
|
hwWlanSysManagementCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hwWlanTrapRestrainGroup, hwWlanSysParaGroup, hwWlanAcSourceInterfaceGroup, hwWlanBatchQueryGroup, hwWlanCapwapConfigGroup,
|
|
hwWlanAcProtectGroup, hwWlanConfigChannelGroup, hwWlanStaLoadbalanceGroup, hwWlanHsbConfigGroup, hwWlanLocationGroup,
|
|
hwWlanSpectrumAnalysisGroup, hwWlanLBSConfigGroup, hwInterAcManagementGroup }
|
|
::= { hwWlanSysManagementCompliances 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2
|
|
hwWlanSysManagementObjectGroups OBJECT IDENTIFIER ::= { hwWlanSysManagementConformance 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.1
|
|
hwWlanTrapRestrainGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanTrapRestrainAll, hwWlanTrapSeverityRestrainSeverity, hwWlanApRegionTrapRestrainRegionIndexMask, hwWlanApTrapRestrainApIndexMask }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.2
|
|
hwWlanSysParaGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanCarrierId, hwWlanAcId, hwWlanForwardMode, hwWlanAcNEnumber, hwWlanAcAccessMaxApNumber,
|
|
hwAcCountryCode, hwWlanApUsername, hwWlanApPassword, hwWlanUsernamePasswordApId, hwWlanApLldpSwitch,
|
|
hwWlanAcAccessMaxStaNumber, hwWlanAcDtlsSwitch, hwWlanAcDtlsPsk, hwWlanApLogManualBackupApId, hwWlanAcDtlsDefaultPskSwitch,
|
|
hwWlanWorkMode, hwWlanIpv6Enable, hwWlanInterAcDtlsEncrpyt, hwWlanInterAcDtlsPsk, hwWlanStaIpv6Switch }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.3
|
|
hwWlanAcSourceInterfaceGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanAcSourceInterfaceValue, hwWlanAcSourceInterfaceMethod, hwWlanAcSourceIPv4Address}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.4
|
|
hwWlanBatchQueryGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanBatchQueryType, hwWlanBatchRequestNum, hwWlanBatchStartCount, hwWlanBatchRequestIdList, hwWlanBatchRequestIdSize,
|
|
hwWlanBatchRequestIdNum, hwWlanBatchValueList, hwWlanBatchReturnNum, hwWlanBatchTotalNum }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.5
|
|
hwWlanCapwapConfigGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanCapwapKeepAliveInterval, hwWlanCapwapKeepAliveTimes, hwWlanCapwapControlPriorityACToAP, hwWlanCapwapControlPriorityAPToAC }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.6
|
|
hwWlanAcProtectGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanAcProtectIpAddress, hwWlanAcProtectPriority, hwWlanAcProtectSwitch, hwWlanAcProtectRestoreSwitch, hwUndoWlanAcProtectIpAddress,
|
|
hwUndoWlanAcProtectPriority,hwWlanAcProtectIpv6Address }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.7
|
|
hwWlanConfigChannelGroup OBJECT-GROUP
|
|
OBJECTS { hwWlan24G20MconfigChannel, hwWlan24G40MPlusConfigChannel, hwWlan24G40MMinusConfigChannel, hwWlan5G20MConfigChannel, hwWlan5G40MPlusConfigChannel,
|
|
hwWlan5G40MMinusConfigChannel, hwWlanConfigChannelApId, hwWlan24G80MConfigChannel, hwWlan5G80MConfigChannel }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.8
|
|
hwWlanStaLoadbalanceGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanStaLoadbalanceEnable, hwWlanStaLoadbalanceMode, hwWlanStaLoadbalanceSessionGap, hwWlanStaLoadbalanceTrafficGap, hwWlanStaLoadbalanceAssociateThreshold
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.9
|
|
hwWlanHsbConfigGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanHsbServiceType, hwWlanHsbGroupId, hwWlanHsbTunnelId }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.10
|
|
hwWlanLocationGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanLocationServerIP, hwWlanLocationServerPort, hwWlanLocationSourceIP, hwWlanLocationApReportToAC, hwWlanLocationApReportToServerIp,
|
|
hwWlanLocationApReportToUdpPort, hwWlanLocationApReportToIpv6Addr, hwWlanLocationAcReportToIpv6Addr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.11
|
|
hwWlanSpectrumAnalysisGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanSpectrumAnalysisServerIP, hwWlanSpectrumAnalysisServerPort, hwWlanNonWifiDeviceAgeTime, hwWlanSpectrogramServerIP, hwWlanSpectrogramServerPort,
|
|
hwWlanSpectrumAnalysisServerIPv6Addr, hwWlanSpectrogramServerIPv6Addr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.13.2.12
|
|
hwWlanLBSConfigGroup OBJECT-GROUP
|
|
OBJECTS { hwWlanLBSAeServerPort, hwWlanLBSAeApReportMode, hwWlanLBSAeApReportPort, hwWlanLBSEkServerIp, hwWlanLBSEkServerPort,
|
|
hwWlanLBSEkApReportMode, hwWlanLBSEkApReportIp, hwWlanLBSEkApReportPort, hwWlanLBSSourceIp, hwWlanLBSAeCompoundTime,
|
|
hwWlanLBSEkServerIpv6Addr, hwWlanLBSEkApReportIpv6Addr, hwWlanLBSSourceIpv6Addr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.2011.6.139.1.16.2.13
|
|
-- 1.3.6.1.4.1.2011.6.139.1.16.2.13
|
|
hwInterAcManagementGroup OBJECT-GROUP
|
|
OBJECTS { hwMasterControllerSwitch, hwConnectMasterControllerSwitch, hwConnectMasterControllerIPv4Address, hwConnectMasterControllerIPv6Address }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { hwWlanSysManagementObjectGroups 13 }
|
|
|
|
END
|
|
|
|
--
|
|
-- HUAWEI-WLAN-SYS-MIB.my
|
|
--
|