1986 lines
87 KiB
Plaintext
1986 lines
87 KiB
Plaintext
-- =================================================================
|
|
-- Copyright (C) 2019 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
-- Description: The MIB is used for defining Huawei's ACCESS management common MIB objects.
|
|
-- Reference:
|
|
-- Version: V1.19
|
|
-- ================================================================
|
|
|
|
HUAWEI-LINE-COMMON-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32, Counter64,
|
|
Unsigned32, Integer32, zeroDotZero, IpAddress, Gauge32, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TruthValue, DateAndTime, RowStatus, MacAddress,TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
ifIndex
|
|
FROM IF-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
OwnerString, EntryStatus
|
|
FROM RMON-MIB
|
|
hwFrameIndex, hwSlotIndex,hwSubslotIndex,hwPortIndex,hwConfigChangeIP
|
|
FROM HUAWEI-DEVICE-MIB
|
|
huaweiMgmt, huaweiUtility
|
|
FROM HUAWEI-MIB;
|
|
|
|
hwAccessCommonMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201902250900Z"
|
|
ORGANIZATION "Huawei Technologies Co.,Ltd."
|
|
CONTACT-INFO
|
|
"Huawei Industrial Base
|
|
Bantian, Longgang
|
|
Shenzhen 518129
|
|
People's Republic of China
|
|
Website: http://www.huawei.com
|
|
Email: support@huawei.com
|
|
"
|
|
DESCRIPTION
|
|
"The MIB is used for defining Huawei's ACCESS management common MIB objects."
|
|
|
|
-- Revision history
|
|
|
|
REVISION "201902250900Z"
|
|
DESCRIPTION "V1.19,
|
|
- Add the enumerate of leaf hwOpticsDdmInfoExSubType in table hwOpticsDdmInfoExTable.
|
|
"
|
|
REVISION "201802061000Z"
|
|
DESCRIPTION "V1.18,
|
|
- Add the enumerate of leaf hwOpticsDdmInfoExModuleType in table hwOpticsDdmInfoExTable.
|
|
- Add the enumerate of leaf hwOpticsDdmInfoExSubType in table hwOpticsDdmInfoExTable.
|
|
- Add the enumerate of leaf hwOpticsDdmInfoExEncapsulationType in table hwOpticsDdmInfoExTable.
|
|
"
|
|
|
|
REVISION "201701050900Z"
|
|
DESCRIPTION "V1.17,
|
|
- Add the enumerate of leaf hwXponOntDdmInfoExModuleType in table hwXponDeviceOntDdmInfoExTable.
|
|
"
|
|
|
|
REVISION "201608200900Z"
|
|
DESCRIPTION "V1.16,
|
|
- Add the enumerate of leaf hwXponOntDdmInfoExSubType in table hwXponDeviceOntDdmInfoExTable.
|
|
"
|
|
|
|
REVISION "201606300900Z"
|
|
DESCRIPTION "V1.15,
|
|
- Add the enumerate of leaf hwXponOntDdmInfoExSubType in table hwXponDeviceOntDdmInfoExTable.
|
|
- Add the enumerate of leaf hwOpticsDdmInfoExSubType in table hwOpticsDdmInfoExTable.
|
|
"
|
|
|
|
REVISION "201601040900Z"
|
|
DESCRIPTION "V1.14,
|
|
- Add the enumerate of leaf hwXponOntDdmInfoExModuleType in table hwXponDeviceOntDdmInfoExTable.
|
|
"
|
|
|
|
REVISION "201412250900Z"
|
|
DESCRIPTION "V1.13,
|
|
-Modify the undefined name of leaf hwXponNniOpticsModuleInfoRateIdentifier in table hwXponNniOpticsModuleInfoTable.
|
|
"
|
|
|
|
REVISION "201412250900Z"
|
|
DESCRIPTION "V1.12,
|
|
-Modify the value range of leaf hwXponOntDdmInfoExUsedType in table hwXponDeviceOntDdmInfoExTable.
|
|
"
|
|
|
|
REVISION "201409180900Z"
|
|
DESCRIPTION "V1.11,
|
|
-Modify the value range of leaf hwOpticsDdmInfoExSubType in table hwOpticsDdmInfoExTable.
|
|
"
|
|
|
|
REVISION "201407060900Z"
|
|
DESCRIPTION "V1.10,
|
|
-Modify the range of nodes hwXponOntDdmInfoExPortId.
|
|
"
|
|
|
|
REVISION "201307250900Z"
|
|
DESCRIPTION "V1.09,
|
|
-Add the table of hwXponNniOpticsModuleInfoTable."
|
|
|
|
REVISION "201307050900Z"
|
|
DESCRIPTION "V1.08,
|
|
-Add the leaf nodes hwXponOntDdmInfoExPortId, hwXponOntDdmInfoExVendorName, hwXponOntDdmInfoExVendorRev,
|
|
hwXponOntDdmInfoExVendorSN, hwXponOntDdmInfoExDateCode in table hwXponDeviceOntDdmInfoExTable."
|
|
|
|
REVISION "201301150900Z"
|
|
DESCRIPTION "V1.07,
|
|
-Modify the leaf of hwPortActualmode, add (65535) enum of the node
|
|
"
|
|
|
|
REVISION "201105260900Z"
|
|
DESCRIPTION "V1.06,
|
|
-Modify the leaf nodes name of hwOpticsDdmInfoExRxPowerLow,hwXponOntDdmInfoExRxPowerLow to hwOpticsDdmInfoExRxPower,hwXponOntDdmInfoExRxPower
|
|
-Modify the postfix name of all the leaf nodes in the table hwOpticsDdmInfoExTable and hwXponDeviceOntDdmInfoExTable
|
|
from HighAlarm,LowAlarm,HighWarning,LowWarning to HighAlarmThreshold,LowAlarmThreshold,HighWarningThreshold,LowWarningThreshold
|
|
-Add the leaf nodes hwOpticsDdmInfoExCatvRxPowerLowAlarmThreshold,hwOpticsDdmInfoExCatvRxPowerHighAlarmThreshold,hwOpticsDdmInfoExModuleType,
|
|
hwOpticsDdmInfoExSubType,hwOpticsDdmInfoExPrecision,hwOpticsDdmInfoExEncapsulationType,hwOpticsDdmInfoExVendorPN,hwOpticsDdmInfoExUsedType
|
|
in table hwOpticsDdmInfoExTable.
|
|
-Add the leaf nodes hwXponOntDdmInfoExCatvRxPowerLowAlarmThreshold,hwXponOntDdmInfoExCatvRxPowerHighAlarmThreshold,hwXponOntDdmInfoExModuleType,
|
|
hwXponOntDdmInfoExSubType,hwXponOntDdmInfoExPrecision,hwXponOntDdmInfoExEncapsulationType,hwXponOntDdmInfoExVendorPN,hwXponOntDdmInfoExUsedType
|
|
in table hwXponDeviceOntDdmInfoExTable.
|
|
"
|
|
|
|
REVISION "201103110900Z"
|
|
DESCRIPTION "V1.05,
|
|
Add a leaf hwOpticsDdmInfo10GTxBiasCurrent to HwOpticsDdmInfoExEntry
|
|
Add a leaf hwOpticsDdmInfo10GTxPower to HwOpticsDdmInfoExEntry
|
|
Add a leaf hwXponOntDdmInfoExOltRxOntPower to HwXponDeviceOntDdmInfoExEntry.
|
|
"
|
|
|
|
|
|
REVISION "201011170900Z"
|
|
DESCRIPTION "V1.04, modify the node name of hwProtTypeAdaptFaultAlarmTrap to hwPortTypeAdaptFaultAlarmTrap
|
|
modify the node name of hwProtTypeAdaptFaultRestoreAlarmTrap to hwPortTypeAdaptFaultRestoreAlarmTrap
|
|
modify the node name of hwProtTypeAdaptSucessAlarmTrap to hwPortTypeAdaptSuccessAlarmTrap.
|
|
"
|
|
|
|
REVISION "201009280900Z"
|
|
DESCRIPTION "V1.03, modify the description of the whole MIB file."
|
|
|
|
REVISION "201008220900Z"
|
|
DESCRIPTION "V1.02, modify the description of the temperature.
|
|
modify the node name of hwXponOntDdmInfoExTable to hwXponDeviceOntDdmInfoExEntry
|
|
for clearing the compilation warning.
|
|
"
|
|
|
|
REVISION "201005200900Z"
|
|
DESCRIPTION "V1.01, add the definition of the trap node,include:
|
|
hwProtTypeAdaptFaultAlarmTrap
|
|
hwProtTypeAdaptFaultRestoreAlarmTrap
|
|
hwProtTypeAdaptSucessAlarmTrap
|
|
hwXponnniPortSwitchAlarmTrap
|
|
hwXponnniPortSwitchTrap
|
|
"
|
|
|
|
REVISION "200912300900Z"
|
|
DESCRIPTION "V1.00, Initial version."
|
|
::= { huaweiUtility 158 }
|
|
|
|
hwAccessCommonObjectMIB OBJECT IDENTIFIER ::= { hwAccessCommonMIB 1}
|
|
hwLineCommonTrapsVbOids OBJECT IDENTIFIER ::= { hwAccessCommonMIB 50}
|
|
hwLineCommonTraps OBJECT IDENTIFIER ::= { hwAccessCommonMIB 51}
|
|
hwLineTraps OBJECT IDENTIFIER ::= { hwLineCommonTraps 1}
|
|
hwLineTrapsPrefix OBJECT IDENTIFIER ::= { hwLineTraps 0 }
|
|
hwLineAlarmTraps OBJECT IDENTIFIER ::= { hwLineCommonTraps 2}
|
|
hwLineAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwLineAlarmTraps 0 }
|
|
hwAccessCommonObjects OBJECT IDENTIFIER ::= { hwAccessCommonObjectMIB 1}
|
|
hwAccessCommonControlObjects OBJECT IDENTIFIER ::= { hwAccessCommonObjects 1}
|
|
hwAccessCommonStatisticObjects OBJECT IDENTIFIER ::= { hwAccessCommonObjects 2}
|
|
|
|
hwOpticsDdmInfoExTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwOpticsDdmInfoExEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table hwOpticsDdmInfoExTable supports the query of the information about the optical transceiver.
|
|
The index of this table is ifIndex.
|
|
"
|
|
::= { hwAccessCommonControlObjects 1 }
|
|
|
|
hwOpticsDdmInfoExEntry OBJECT-TYPE
|
|
SYNTAX HwOpticsDdmInfoExEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table hwOpticsDdmInfoExTable supports the query of the information about the optical transceiver.
|
|
The index of this entry is ifIndex.
|
|
"
|
|
INDEX { ifIndex }
|
|
::= { hwOpticsDdmInfoExTable 1 }
|
|
|
|
HwOpticsDdmInfoExEntry ::=
|
|
SEQUENCE {
|
|
hwOpticsDdmInfoExTemperature Integer32,
|
|
hwOpticsDdmInfoExTemperatureHighAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExTemperatureLowAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExTemperatureHighWarningThreshold Integer32,
|
|
hwOpticsDdmInfoExTemperatureLowWarningThreshold Integer32,
|
|
hwOpticsDdmInfoExSupplyVoltage Integer32,
|
|
hwOpticsDdmInfoExSupplyVoltageHighAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExSupplyVoltageLowAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExSupplyVoltageHighWarningThreshold Integer32,
|
|
hwOpticsDdmInfoExSupplyVoltageLowWarningThreshold Integer32,
|
|
hwOpticsDdmInfoExTxBiasCurrent Integer32,
|
|
hwOpticsDdmInfoExTxBiasCurrentHighAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExTxBiasCurrentLowAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExTxBiasCurrentHighWarningThreshold Integer32,
|
|
hwOpticsDdmInfoExTxBiasCurrentLowWarningThreshold Integer32,
|
|
hwOpticsDdmInfoExTxPower Integer32,
|
|
hwOpticsDdmInfoExTxPowerHighAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExTxPowerLowAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExTxPowerHighWarningThreshold Integer32,
|
|
hwOpticsDdmInfoExTxPowerLowWarningThreshold Integer32,
|
|
hwOpticsDdmInfoExRxPower Integer32,
|
|
hwOpticsDdmInfoExRxPowerHighAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExRxPowerLowAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExRxPowerHighWarningThreshold Integer32,
|
|
hwOpticsDdmInfoExRxPowerLowWarningThreshold Integer32,
|
|
hwOpticsDdmInfo10GTxBiasCurrent Integer32,
|
|
hwOpticsDdmInfo10GTxPower Integer32,
|
|
hwOpticsDdmInfoExCatvRxPowerHighAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExCatvRxPowerLowAlarmThreshold Integer32,
|
|
hwOpticsDdmInfoExModuleType INTEGER,
|
|
hwOpticsDdmInfoExSubType INTEGER,
|
|
hwOpticsDdmInfoExPrecision Integer32,
|
|
hwOpticsDdmInfoExEncapsulationType INTEGER,
|
|
hwOpticsDdmInfoExVendorPN OCTET STRING,
|
|
hwOpticsDdmInfoExUsedType INTEGER
|
|
}
|
|
|
|
hwOpticsDdmInfoExTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001 C(centigrade)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature of the optical transceiver.
|
|
Unit: 0.000001 C(centigrade)
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 1 }
|
|
|
|
hwOpticsDdmInfoExTemperatureHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001 C(centigrade)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper alarm threshold of the temperature.
|
|
Unit: 0.000001 C(centigrade)
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 2 }
|
|
|
|
hwOpticsDdmInfoExTemperatureLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001 C(centigrade)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower alarm threshold of the temperature.
|
|
Unit: 0.000001 C(centigrade)
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 3 }
|
|
|
|
hwOpticsDdmInfoExTemperatureHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001 C(centigrade)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper warning threshold of the temperature.
|
|
Unit: 0.000001 C(centigrade)
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 4 }
|
|
|
|
hwOpticsDdmInfoExTemperatureLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001 C(centigrade)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower warning threshold of the temperature.
|
|
Unit: 0.000001 C(centigrade)
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 5 }
|
|
|
|
hwOpticsDdmInfoExSupplyVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Voltage of the optical transceiver.
|
|
Unit: 0.000001V
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 6 }
|
|
|
|
hwOpticsDdmInfoExSupplyVoltageHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper alarm threshold of the voltage.
|
|
Unit: 0.000001V
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 7 }
|
|
|
|
hwOpticsDdmInfoExSupplyVoltageLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower alarm threshold of the voltage.
|
|
Unit: 0.000001V
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 8 }
|
|
|
|
hwOpticsDdmInfoExSupplyVoltageHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper warning threshold of the voltage.
|
|
Unit: 0.000001V
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 9 }
|
|
|
|
hwOpticsDdmInfoExSupplyVoltageLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower warning threshold of the voltage.
|
|
Unit: 0.000001V
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 10 }
|
|
|
|
hwOpticsDdmInfoExTxBiasCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current of the optical transceiver.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 11 }
|
|
|
|
|
|
hwOpticsDdmInfoExTxBiasCurrentHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper alarm threshold of the bias current.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 12 }
|
|
|
|
hwOpticsDdmInfoExTxBiasCurrentLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower alarm threshold of the bias current.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 13 }
|
|
|
|
hwOpticsDdmInfoExTxBiasCurrentHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper warning threshold of the bias current.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 14 }
|
|
|
|
hwOpticsDdmInfoExTxBiasCurrentLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower warning threshold of the bias current.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 15 }
|
|
|
|
hwOpticsDdmInfoExTxPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx optical power of the optical transceiver.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 16 }
|
|
|
|
hwOpticsDdmInfoExTxPowerHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper alarm threshold of the Tx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 17 }
|
|
|
|
hwOpticsDdmInfoExTxPowerLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower alarm threshold of the Tx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 18 }
|
|
|
|
hwOpticsDdmInfoExTxPowerHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper warning threshold of the Tx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 19 }
|
|
|
|
hwOpticsDdmInfoExTxPowerLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower warning threshold of the Tx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 20 }
|
|
|
|
hwOpticsDdmInfoExRxPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx optical power of the optical transceiver.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 21 }
|
|
|
|
hwOpticsDdmInfoExRxPowerHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper alarm threshold of the Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 22 }
|
|
|
|
hwOpticsDdmInfoExRxPowerLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower alarm threshold of the Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 23 }
|
|
|
|
hwOpticsDdmInfoExRxPowerHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper warning threshold of the Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 24 }
|
|
|
|
hwOpticsDdmInfoExRxPowerLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower warning threshold of the Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 25 }
|
|
|
|
hwOpticsDdmInfo10GTxBiasCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current of the 10g optical transceiver.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 26 }
|
|
|
|
hwOpticsDdmInfo10GTxPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.01dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx optical power of the 10g optical transceiver.
|
|
Unit: 0.01dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 27 }
|
|
|
|
hwOpticsDdmInfoExCatvRxPowerHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper AlarmThreshold threshold of the CATV Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 28 }
|
|
|
|
hwOpticsDdmInfoExCatvRxPowerLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower AlarmThreshold threshold of the CATV Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 29 }
|
|
|
|
|
|
hwOpticsDdmInfoExModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
gpon(1),
|
|
epon(2),
|
|
epon10g(3),
|
|
gpon10g(4),
|
|
wdmpon(5),
|
|
hybridpon(6),
|
|
gponepon(7),
|
|
unknown(8),
|
|
xgspon(9),
|
|
gponandxgpon(10),
|
|
gponandxgspon(11),
|
|
twdmpon(15),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Options:
|
|
1. gpon(1) - GPON
|
|
2. epon(2) - EPON
|
|
3. epon10g(3) - 10G EPON
|
|
4. gpon10g(4) - 10G GPON
|
|
5. wdmpon(5) - WDM PON
|
|
6. hybridpon(6) - hybrid PON
|
|
7. gponepon(7) - GPON/EPON
|
|
8. unknown(8) - Unknown
|
|
9. xgspon(9) - XGS-PON
|
|
10.gponandxgpon(10) - GPON+XG-PON
|
|
11.gponandxgspon(11) - GPON+XGS-PON
|
|
12.twdmpon(15) - TWDM-PON
|
|
13.invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 30 }
|
|
|
|
hwOpticsDdmInfoExSubType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
classbplus(1),
|
|
classcplus(2),
|
|
classb(3),
|
|
classcplusplus(4),
|
|
classd(5),
|
|
n2a(33),
|
|
n2b(34),
|
|
n1(35),
|
|
e1(36),
|
|
e2a(37),
|
|
e2b(38),
|
|
n1n2ae1e2a(39),
|
|
d1(40),
|
|
d2(41),
|
|
n2(42),
|
|
e2(43),
|
|
px20(65),
|
|
px20plus(66),
|
|
px20plusplus(67),
|
|
pr30(97),
|
|
pr20(98),
|
|
prx30(99),
|
|
prx20(100),
|
|
prx40(101),
|
|
pr40(102),
|
|
prx30e(103),
|
|
prx40e(104),
|
|
pr30plus(105),
|
|
classbPlusAndPx20Plus(129),
|
|
classbAndPx20(130),
|
|
unknown(145),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Options:
|
|
1. classbplus(1) - CLASS B+
|
|
2. classcplus(2) - CLASS C+
|
|
3. classb(3) - CLASS B
|
|
4. classcplusplus(4) - CLASS C++
|
|
5. classd(5) - CLASS D
|
|
6. n2a(33) - N2a
|
|
7. n2b(34) - N2b
|
|
8. n1(35) - N1
|
|
9. e1(36) - E1
|
|
10. e2a(37) - N2a
|
|
11.e2b(38) - N2b
|
|
12.n1n2ae1e2a(39) - N1/N2a/E1/E2a
|
|
13.d1(40) - D1
|
|
14.d2(41) - D2
|
|
15.n2(42) - N2
|
|
16.e2(43) - E2
|
|
17.px20(65) - PX20
|
|
18.px20plus(66) - PX20+
|
|
19.px20plusplus(67) - PX20++
|
|
20.pr30(97) - PR30
|
|
21.pr20(98) - PR20
|
|
22.prx30(99) - PRX30
|
|
23.prx20(100) - PRX20
|
|
24.prx40(101) - PRX40
|
|
25.pr40(102) - PR40
|
|
26.prx30e(103) - PRX30-E
|
|
27.prx40e(104) - PRX40-E
|
|
28.pr30plus(105) - PR30+
|
|
29.classbPlusAndPx20Plus(129) - GPON CLASS B+/EPON PX20+
|
|
30.classbAndPx20(130) - GPON CLASS B/EPON PX20
|
|
31.unknown(145) - Unknown
|
|
32.invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 31 }
|
|
|
|
hwOpticsDdmInfoExPrecision OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the precision of optical power.
|
|
Unit: 0.1dBm
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 32 }
|
|
|
|
hwOpticsDdmInfoExEncapsulationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sff2x5(1),
|
|
sff2x10(2),
|
|
sfp(3),
|
|
xfp(4),
|
|
lxfp(5),
|
|
bosaonboard(6),
|
|
unknown(7),
|
|
sfpplus(8),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Options:
|
|
1. sff2x5(1) - SFF 2x5
|
|
2. sff2x10(2) - SFF 2x10
|
|
3. sfp(3) - SFP
|
|
4. xfp(4) - XFP
|
|
5. lxfp(5) - LXFP
|
|
6. bosaonboard(6) - BOSA ON BOARD
|
|
7. unknown(7) - Unknown
|
|
8. sfpplus(8) - SFP+
|
|
9. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 33 }
|
|
|
|
hwOpticsDdmInfoExVendorPN OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the part number."
|
|
::= { hwOpticsDdmInfoExEntry 34 }
|
|
|
|
hwOpticsDdmInfoExUsedType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
olt(1),
|
|
onu(3),
|
|
catvtriplex(4),
|
|
unknown(5),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the application scenario of the optical transceiver.
|
|
Options:
|
|
1. olt(1) - OLT
|
|
2. onu(3) - ONU
|
|
3. catvtriplex(4) - CATV TriPlex
|
|
4. unknown(5) - Unknown
|
|
5. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwOpticsDdmInfoExEntry 35 }
|
|
|
|
--Table hwXponDeviceOntDdmInfoExTable
|
|
hwXponDeviceOntDdmInfoExTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwXponDeviceOntDdmInfoExEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table hwXponDeviceOntDdmInfoExTable supports the query of the
|
|
information about the optical transceiver of the ONT port.
|
|
The index of this table is a combination of ifIndex and hwXponOntDdmInfoExOntIndex.
|
|
"
|
|
::= { hwAccessCommonControlObjects 2 }
|
|
|
|
hwXponDeviceOntDdmInfoExEntry OBJECT-TYPE
|
|
SYNTAX HwXponDeviceOntDdmInfoExEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table hwXponDeviceOntDdmInfoExTable supports the query of the
|
|
information about the optical transceiver of the ONT port.
|
|
The index of this entry is a combination of ifIndex and hwXponOntDdmInfoExOntIndex.
|
|
"
|
|
INDEX { ifIndex, hwXponOntDdmInfoExOntIndex}
|
|
::= { hwXponDeviceOntDdmInfoExTable 1 }
|
|
|
|
HwXponDeviceOntDdmInfoExEntry ::=
|
|
SEQUENCE {
|
|
hwXponOntDdmInfoExOntIndex Integer32,
|
|
hwXponOntDdmInfoExTemperature Integer32,
|
|
hwXponOntDdmInfoExTemperatureHighAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExTemperatureLowAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExTemperatureHighWarningThreshold Integer32,
|
|
hwXponOntDdmInfoExTemperatureLowWarningThreshold Integer32,
|
|
hwXponOntDdmInfoExSupplyVoltage Integer32,
|
|
hwXponOntDdmInfoExSupplyVoltageHighAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExSupplyVoltageLowAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExSupplyVoltageHighWarningThreshold Integer32,
|
|
hwXponOntDdmInfoExSupplyVoltageLowWarningThreshold Integer32,
|
|
hwXponOntDdmInfoExTxBiasCurrent Integer32,
|
|
hwXponOntDdmInfoExTxBiasCurrentHighAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExTxBiasCurrentLowAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExTxBiasCurrentHighWarningThreshold Integer32,
|
|
hwXponOntDdmInfoExTxBiasCurrentLowWarningThreshold Integer32,
|
|
hwXponOntDdmInfoExTxPower Integer32,
|
|
hwXponOntDdmInfoExTxPowerHighAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExTxPowerLowAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExTxPowerHighWarningThreshold Integer32,
|
|
hwXponOntDdmInfoExTxPowerLowWarningThreshold Integer32,
|
|
hwXponOntDdmInfoExRxPower Integer32,
|
|
hwXponOntDdmInfoExRxPowerHighAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExRxPowerLowAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExRxPowerHighWarningThreshold Integer32,
|
|
hwXponOntDdmInfoExRxPowerLowWarningThreshold Integer32,
|
|
hwXponOntDdmInfoExOltRxOntPower Integer32,
|
|
hwXponOntDdmInfoExCatvRxPowerHighAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExCatvRxPowerLowAlarmThreshold Integer32,
|
|
hwXponOntDdmInfoExModuleType INTEGER,
|
|
hwXponOntDdmInfoExSubType INTEGER,
|
|
hwXponOntDdmInfoExPrecision Integer32,
|
|
hwXponOntDdmInfoExEncapsulationType INTEGER,
|
|
hwXponOntDdmInfoExVendorPN OCTET STRING,
|
|
hwXponOntDdmInfoExUsedType INTEGER,
|
|
hwXponOntDdmInfoExPortId Integer32,
|
|
hwXponOntDdmInfoExVendorName OCTET STRING,
|
|
hwXponOntDdmInfoExVendorRev OCTET STRING,
|
|
hwXponOntDdmInfoExVendorSN OCTET STRING,
|
|
hwXponOntDdmInfoExDateCode OCTET STRING
|
|
}
|
|
|
|
hwXponOntDdmInfoExOntIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ONT ID, range: 0-127"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 1 }
|
|
|
|
hwXponOntDdmInfoExTemperature OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001 C(centigrade)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Temperature of the optical transceiver on the ONT.
|
|
Unit: 0.000001 C(centigrade)
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 2 }
|
|
|
|
hwXponOntDdmInfoExTemperatureHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001 C(centigrade)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper alarm threshold of the temperature.
|
|
Unit: 0.000001 C(centigrade)
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 3 }
|
|
|
|
hwXponOntDdmInfoExTemperatureLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001 C(centigrade)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower alarm threshold of the temperature.
|
|
Unit: 0.000001 C(centigrade)
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 4 }
|
|
|
|
hwXponOntDdmInfoExTemperatureHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001 C(centigrade)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper warning threshold of the temperature.
|
|
Unit: 0.000001 C(centigrade)
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 5 }
|
|
|
|
hwXponOntDdmInfoExTemperatureLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001 C(centigrade)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower warning threshold of the temperature.
|
|
Unit: 0.000001 C(centigrade)
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 6 }
|
|
|
|
hwXponOntDdmInfoExSupplyVoltage OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Voltage of the optical transceiver on the ONT.
|
|
Unit: 0.000001V
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 7 }
|
|
|
|
hwXponOntDdmInfoExSupplyVoltageHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper alarm threshold of the voltage.
|
|
Unit: 0.000001V
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 8 }
|
|
|
|
hwXponOntDdmInfoExSupplyVoltageLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower alarm threshold of the voltage.
|
|
Unit: 0.000001V
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 9 }
|
|
|
|
hwXponOntDdmInfoExSupplyVoltageHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper warning threshold of the voltage.
|
|
Unit: 0.000001V
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 10 }
|
|
|
|
hwXponOntDdmInfoExSupplyVoltageLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001V"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower warning threshold of the voltage.
|
|
Unit: 0.000001V
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 11 }
|
|
|
|
hwXponOntDdmInfoExTxBiasCurrent OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current of the optical transceiver on the ONT.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 12 }
|
|
|
|
hwXponOntDdmInfoExTxBiasCurrentHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper alarm threshold of the bias current.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 13 }
|
|
|
|
hwXponOntDdmInfoExTxBiasCurrentLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower alarm threshold of the bias current.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 14 }
|
|
|
|
hwXponOntDdmInfoExTxBiasCurrentHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper warning threshold of the bias current.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 15 }
|
|
|
|
hwXponOntDdmInfoExTxBiasCurrentLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001A"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower warning threshold of the bias current.
|
|
Unit: 0.000001A
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 16 }
|
|
|
|
hwXponOntDdmInfoExTxPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tx optical power of the optical transceiver on the ONT.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 17 }
|
|
|
|
hwXponOntDdmInfoExTxPowerHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper alarm threshold of the Tx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 18 }
|
|
|
|
hwXponOntDdmInfoExTxPowerLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower alarm threshold of the Tx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 19 }
|
|
|
|
hwXponOntDdmInfoExTxPowerHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper warning threshold of the Tx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 20 }
|
|
|
|
hwXponOntDdmInfoExTxPowerLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower warning threshold of the Tx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 21 }
|
|
|
|
hwXponOntDdmInfoExRxPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rx optical power of the optical transceiver on the ONT.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 22 }
|
|
|
|
hwXponOntDdmInfoExRxPowerHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper alarm threshold of the Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 23 }
|
|
|
|
hwXponOntDdmInfoExRxPowerLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower alarm threshold of the Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 24 }
|
|
|
|
hwXponOntDdmInfoExRxPowerHighWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper warning threshold of the Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 25 }
|
|
|
|
hwXponOntDdmInfoExRxPowerLowWarningThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower warning threshold of the Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 26 }
|
|
|
|
hwXponOntDdmInfoExOltRxOntPower OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"threshold of the ont Tx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 27 }
|
|
|
|
hwXponOntDdmInfoExCatvRxPowerHighAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Upper AlarmThreshold threshold of the CATV Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 28 }
|
|
|
|
hwXponOntDdmInfoExCatvRxPowerLowAlarmThreshold OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.000001dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lower AlarmThreshold threshold of the CATV Rx power.
|
|
Unit: 0.000001dBm
|
|
Options:
|
|
1. invalid(0x7FFFFFFF) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 29 }
|
|
|
|
hwXponOntDdmInfoExModuleType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
gpon(1),
|
|
epon(2),
|
|
epon10g(3),
|
|
gpon10g(4),
|
|
wdmpon(5),
|
|
hybridpon(6),
|
|
gponepon(7),
|
|
unknown(8),
|
|
xgspon(9),
|
|
twdmpon(15),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Options:
|
|
1. gpon(1) - GPON
|
|
2. epon(2) - EPON
|
|
3. epon10g(3) - 10G EPON
|
|
4. gpon10g(4) - 10G GPON
|
|
5. wdmpon(5) - WDM PON
|
|
6. hybridpon(6) - hybrid PON
|
|
7. gponepon(7) - GPON/EPON
|
|
8. unknown(8) - Unknown
|
|
9. xgspon(9) - XGS-PON
|
|
10.twdmpon(15) - TWDM-PON
|
|
11.invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 30 }
|
|
|
|
hwXponOntDdmInfoExSubType OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
classbplus(1),
|
|
classcplus(2),
|
|
classb(3),
|
|
classcplusplus(4),
|
|
n2a(33),
|
|
n2b(34),
|
|
n1(35),
|
|
e1(36),
|
|
e2a(37),
|
|
e2b(38),
|
|
n1n2ae1e2a(39),
|
|
px20(65),
|
|
px20plus(66),
|
|
px20plusplus(67),
|
|
pr30(97),
|
|
pr20(98),
|
|
prx30(99),
|
|
prx20(100),
|
|
prx40(101),
|
|
pr40(102),
|
|
prx30e(103),
|
|
classbPlusAndPx20Plus(129),
|
|
classbAndPx20(130),
|
|
unknown(145),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Options:
|
|
1. classbplus(1) - CLASS B+
|
|
2. classcplus(2) - CLASS C+
|
|
3. classb(3) - CLASS B
|
|
4. classcplusplus(4) - CLASS C++
|
|
5. n2a(33) - N2a
|
|
6. n2b(34) - N2b
|
|
7. n1(35) - N1
|
|
8. e1(36) - E1
|
|
9. e2a(37) - N2a
|
|
10. e2b(38) - N2b
|
|
11. n1n2ae1e2a(39) - N1/N2a/E1/E2a
|
|
12. px20(65) - PX20
|
|
13. px20plus(66) - PX20+
|
|
14. px20plusplus(67) - PX20++
|
|
15. pr30(97) - PR30
|
|
16. pr20(98) - PR20
|
|
17. prx30(99) - PRX30
|
|
18. prx20(100) - PRX20
|
|
19. prx40(101) - PRX40
|
|
20. pr40(102) - PR40
|
|
21. prx30e(103) - PRX30-E
|
|
22. classbPlusAndPx20Plus(129) - GPON CLASS B+/EPON PX20+
|
|
23. classbAndPx20(130) - GPON CLASS B/EPON PX20
|
|
24. unknown(145) - Unknown
|
|
25. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 31 }
|
|
|
|
hwXponOntDdmInfoExPrecision OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "0.1dBm"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the precision of optical power.
|
|
Unit: 0.1dBm
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 32 }
|
|
|
|
hwXponOntDdmInfoExEncapsulationType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sff2x5(1),
|
|
sff2x10(2),
|
|
sfp(3),
|
|
xfp(4),
|
|
lxfp(5),
|
|
bosaonboard(6),
|
|
unknown(7),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Options:
|
|
1. sff2x5(1) - SFF 2x5
|
|
2. sff2x10(2) - SFF 2x10
|
|
3. sfp(3) - SFP
|
|
4. xfp(4) - XFP
|
|
5. lxfp(5) - LXFP
|
|
6. bosaonboard(6) - BOSA ON BOARD
|
|
7. unknown(7) - Unknown
|
|
8. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 33 }
|
|
|
|
hwXponOntDdmInfoExVendorPN OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the part number."
|
|
::= { hwXponDeviceOntDdmInfoExEntry 34 }
|
|
|
|
hwXponOntDdmInfoExUsedType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
olt(1),
|
|
onu(3),
|
|
catvtriplex(4),
|
|
unknown(5),
|
|
sfponu(6),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the application scenario of the optical transceiver.
|
|
Options:
|
|
1. olt(1) - OLT
|
|
2. onu(3) - ONU
|
|
3. catvtriplex(4) - CATV TriPlex
|
|
4. unknown(5) - Unknown
|
|
5. sfponu(6) - SFP ONU
|
|
6. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 35 }
|
|
hwXponOntDdmInfoExPortId OBJECT-TYPE
|
|
SYNTAX Integer32 (-1 | 0..1)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the ID of the ONT PON port where the optical module is located.
|
|
It is numbered from 0.
|
|
Options:
|
|
1. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponDeviceOntDdmInfoExEntry 36 }
|
|
hwXponOntDdmInfoExVendorName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the SFP vendor name (ASCII)."
|
|
::= { hwXponDeviceOntDdmInfoExEntry 37 }
|
|
hwXponOntDdmInfoExVendorRev OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..5))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the revision level for part number provided by vendor (ASCII)."
|
|
::= { hwXponDeviceOntDdmInfoExEntry 38 }
|
|
hwXponOntDdmInfoExVendorSN OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the serial number provided by vendor (ASCII)."
|
|
::= { hwXponDeviceOntDdmInfoExEntry 39 }
|
|
hwXponOntDdmInfoExDateCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates manufacturing date code of the vendor (ASCII)."
|
|
::= { hwXponDeviceOntDdmInfoExEntry 40 }
|
|
|
|
|
|
--Table hwXponNniOpticsModuleInfoTable
|
|
hwXponNniOpticsModuleInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwXponNniOpticsModuleInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table supports the query of the
|
|
information about the optical transceiver of the ONT port.
|
|
The index of this table is ifIndex.
|
|
"
|
|
::= { hwAccessCommonControlObjects 3 }
|
|
|
|
hwXponNniOpticsModuleInfoEntry OBJECT-TYPE
|
|
SYNTAX HwXponNniOpticsModuleInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table supports the query of the
|
|
information about the optical transceiver of the ONT port.
|
|
The index of this entry is ifIndex.
|
|
"
|
|
INDEX { ifIndex }
|
|
::= { hwXponNniOpticsModuleInfoTable 1 }
|
|
|
|
HwXponNniOpticsModuleInfoEntry ::=
|
|
SEQUENCE {
|
|
hwXponNniOpticsModuleInfoVendorName OCTET STRING,
|
|
hwXponNniOpticsModuleInfoVendorRev OCTET STRING,
|
|
hwXponNniOpticsModuleInfoVendorOUI OCTET STRING,
|
|
hwXponNniOpticsModuleInfoVendorPN OCTET STRING,
|
|
hwXponNniOpticsModuleInfoVendorSN OCTET STRING,
|
|
hwXponNniOpticsModuleInfoDateCode OCTET STRING,
|
|
hwXponNniOpticsModuleInfoSFF8472Compliance INTEGER,
|
|
hwXponNniOpticsModuleInfoWaveLength Integer32,
|
|
hwXponNniOpticsModuleInfoIdentifier INTEGER,
|
|
hwXponNniOpticsModuleInfoExtID INTEGER,
|
|
hwXponNniOpticsModuleInfoConnector INTEGER,
|
|
hwXponNniOpticsModuleInfoEncoding INTEGER,
|
|
hwXponNniOpticsModuleInfoLength9Micronkm Integer32,
|
|
hwXponNniOpticsModuleInfoLength50Micron Integer32,
|
|
hwXponNniOpticsModuleInfoLength62Micron5 Integer32,
|
|
hwXponNniOpticsModuleInfoLengthCopper Integer32,
|
|
hwXponNniOpticsModuleInfoLengthOm3 Integer32,
|
|
hwXponNniOpticsModuleInfoBrMax Integer32,
|
|
hwXponNniOpticsModuleInfoBrMin Integer32,
|
|
hwXponNniOpticsModuleInfoBrNominal Integer32,
|
|
hwXponNniOpticsModuleInfoDiagnosticMonitoringType Integer32,
|
|
hwXponNniOpticsModuleInfoOptions Integer32,
|
|
hwXponNniOpticsModuleInfoEnhancedOptions Integer32,
|
|
hwXponNniOpticsModuleInfoCcBase Integer32,
|
|
hwXponNniOpticsModuleInfoCcExt Integer32,
|
|
hwXponNniOpticsModuleInfoRateIdentifier INTEGER
|
|
}
|
|
|
|
hwXponNniOpticsModuleInfoVendorName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the vendor name."
|
|
::= { hwXponNniOpticsModuleInfoEntry 1 }
|
|
|
|
hwXponNniOpticsModuleInfoVendorRev OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..5))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the revision level for part number provided by vendor."
|
|
::= { hwXponNniOpticsModuleInfoEntry 2 }
|
|
|
|
hwXponNniOpticsModuleInfoVendorOUI OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..9))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the vendor IEEE company ID."
|
|
::= { hwXponNniOpticsModuleInfoEntry 3 }
|
|
|
|
hwXponNniOpticsModuleInfoVendorPN OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the part number provided by vendor."
|
|
::= { hwXponNniOpticsModuleInfoEntry 4 }
|
|
|
|
hwXponNniOpticsModuleInfoVendorSN OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the serial number provided by vendor."
|
|
::= { hwXponNniOpticsModuleInfoEntry 5 }
|
|
|
|
hwXponNniOpticsModuleInfoDateCode OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates manufacturing date code of the vendor."
|
|
::= { hwXponNniOpticsModuleInfoEntry 6 }
|
|
|
|
hwXponNniOpticsModuleInfoSFF8472Compliance OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined(1),
|
|
includesRev93SFF8472(2),
|
|
includesRev94SFF8472(3),
|
|
includesRev95SFF8472(4),
|
|
includesRev102SFF8472(5),
|
|
includesRev104SFF8472(6),
|
|
includesRev110SFF8472(7),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which revision of SFF-8472 the transceiver complies
|
|
Options:
|
|
1. undefined(1) - Not included or undefined
|
|
2. includesRev93SFF8472(2) - Includes functionality described in Rev 9.3
|
|
3. includesRev94SFF8472(3) - Includes functionality described in Rev 9.4
|
|
4. includesRev95SFF8472(4) - Includes functionality described in Rev 9.5
|
|
5. includesRev102SFF8472(5) - Includes functionality described in Rev 10.2
|
|
6. includesRev104SFF8472(6) - Includes functionality described in Rev 10.4
|
|
7. includesRev110SFF8472(7) - Includes functionality described in Rev 11.0
|
|
8. invalid (-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponNniOpticsModuleInfoEntry 7 }
|
|
|
|
hwXponNniOpticsModuleInfoWaveLength OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the laser wavelength, units of nm."
|
|
::= { hwXponNniOpticsModuleInfoEntry 8 }
|
|
|
|
hwXponNniOpticsModuleInfoIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
gbic(2),
|
|
solderedToMotherboard(3),
|
|
sfporsfpplus(4),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the type of serial transceiver.
|
|
Options:
|
|
1. unknown(1) - Unknown or unspecified
|
|
2. gbic(2) - GBIC
|
|
3. solderedToMotherboard(3) - Module soldered to motherboard
|
|
4. sfporsfpplus(4) - SFP or SFP Plus
|
|
5. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponNniOpticsModuleInfoEntry 9 }
|
|
|
|
hwXponNniOpticsModuleInfoExtID OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSpecifiedOrNotCompliant(1),
|
|
moddef1(2),
|
|
moddef2(3),
|
|
moddef3(4),
|
|
bySerialIDOnly(5),
|
|
moddef5(6),
|
|
moddef6(7),
|
|
moddef7(8),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the extended identifier of type of serial transceiver.
|
|
Options:
|
|
1. notSpecifiedOrNotCompliant(1) - Not specified or not compliant with a defined MOD_DEF
|
|
2. moddef1(2) - GBIC is compliant with MOD_DEF 1
|
|
3. moddef2(3) - GBIC is compliant with MOD_DEF 2
|
|
4. moddef3(4) - GBIC is compliant with MOD_DEF 3
|
|
5. bySerialIDOnly(5) - GBIC/SFP function is defined by serial ID only
|
|
6. moddef5(6) - GBIC is compliant with MOD_DEF 5
|
|
7. moddef6(7) - GBIC is compliant with MOD_DEF 6
|
|
8. moddef7(8) - GBIC is compliant with MOD_DEF 7
|
|
9. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponNniOpticsModuleInfoEntry 10 }
|
|
|
|
hwXponNniOpticsModuleInfoConnector OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
sc(2),
|
|
copperConnector1(3),
|
|
copperConnector2(4),
|
|
bnctnc(5),
|
|
coaxialHeaders(6),
|
|
fiberJack(7),
|
|
lc(8),
|
|
mtrj(9),
|
|
mu(10),
|
|
sg(11),
|
|
opticalPigtail(12),
|
|
hssdcII(13),
|
|
copperPigtail(14),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the code for connector type.
|
|
Options:
|
|
1. unknown(1) - Unknown
|
|
2. sc(2) - SC
|
|
3. copperConnector1(3) - Fibre Channel Style 1 copper connector
|
|
4. copperConnector2(4) - Fibre Channel Style 2 copper connector
|
|
5. bnctnc(5) - BNC/TNC
|
|
6. coaxialHeaders(6) - Fibre Channel coaxial headers
|
|
7. fiberJack(7) - FiberJack
|
|
8. lc(8) - LC
|
|
9. mtrj(9) - MT-RJ
|
|
10. mu(10) - MU
|
|
11. sg(11) - SG
|
|
12. opticalPigtail(12) - Optical pigtail
|
|
13. hssdcII(13) - HSSDC II
|
|
14. copperPigtail(14) - Copper Pigtail
|
|
15. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponNniOpticsModuleInfoEntry 11 }
|
|
|
|
hwXponNniOpticsModuleInfoEncoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unspecified(1),
|
|
encodingMethod8B10B(2),
|
|
encodingMethod4B5B(3),
|
|
nrz(4),
|
|
manchester(5),
|
|
sonetScrambled(6),
|
|
encodingMethod64B66B(7),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the code for serial encoding algorithm.
|
|
Options:
|
|
1. unspecified(1) - Unspecified
|
|
2. encodingMethod8B10B(2) - 8B10B
|
|
3. encodingMethod4B5B(3) - 4B5B
|
|
4. nrz(4) - NRZ
|
|
5. manchester(5) - Manchester
|
|
6. sonetScrambled(6) - SONET Scrambled
|
|
7. encodingMethod64B66B(7) - 64B66B
|
|
8. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponNniOpticsModuleInfoEntry 12 }
|
|
|
|
hwXponNniOpticsModuleInfoLength9Micronkm OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the link length supported for 9/125 micron fiber, units of 1000 m."
|
|
::= { hwXponNniOpticsModuleInfoEntry 13 }
|
|
|
|
hwXponNniOpticsModuleInfoLength50Micron OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the link length supported for 50/125 micron fiber, units of 10 m."
|
|
::= { hwXponNniOpticsModuleInfoEntry 14 }
|
|
|
|
hwXponNniOpticsModuleInfoLength62Micron5 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the link length supported for 62.5/125 micron fiber, units of 10 m."
|
|
::= { hwXponNniOpticsModuleInfoEntry 15 }
|
|
|
|
hwXponNniOpticsModuleInfoLengthCopper OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the link length supported for copper, units of meters."
|
|
::= { hwXponNniOpticsModuleInfoEntry 16 }
|
|
|
|
hwXponNniOpticsModuleInfoLengthOm3 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the link length supported for 50/125 micron OM3 fiber, units of 10 m."
|
|
::= { hwXponNniOpticsModuleInfoEntry 17 }
|
|
|
|
hwXponNniOpticsModuleInfoBrMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the upper bit rate margin, units of %."
|
|
::= { hwXponNniOpticsModuleInfoEntry 18 }
|
|
|
|
hwXponNniOpticsModuleInfoBrMin OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the lower bit rate margin, units of %."
|
|
::= { hwXponNniOpticsModuleInfoEntry 19 }
|
|
|
|
hwXponNniOpticsModuleInfoBrNominal OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the nominal bit rate, units of 100 MBits/sec."
|
|
::= { hwXponNniOpticsModuleInfoEntry 20 }
|
|
|
|
hwXponNniOpticsModuleInfoDiagnosticMonitoringType OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which type of diagnostic monitoring is implemented.
|
|
bit Description of Diagnostic Monitoring Type
|
|
7 Reserved
|
|
6 Digital diagnostic monitoring
|
|
5 Internally Calibrated
|
|
4 Externally Calibrated
|
|
3 Received power measurement type:(0 = OMA, 1 = Average)
|
|
2 Address change required
|
|
1-0 Reserved
|
|
"
|
|
::= { hwXponNniOpticsModuleInfoEntry 21 }
|
|
|
|
hwXponNniOpticsModuleInfoOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which optional transceiver signals are implemented.
|
|
bit Description of option
|
|
10 Cooled Transceiver Declaration
|
|
9 Power Level Declaration
|
|
8 Linear Receiver Output Implemented
|
|
7-6 Reserved
|
|
5 RATE_SELECT
|
|
4 TX_DISABLE
|
|
3 TX_FAULT
|
|
2 LOS (signal inverted from standard definition)
|
|
1 LOS (signal as defined in SFP MSA)
|
|
0 Reserved
|
|
"
|
|
::= { hwXponNniOpticsModuleInfoEntry 22 }
|
|
|
|
hwXponNniOpticsModuleInfoEnhancedOptions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which optional enhanced features are implemented.
|
|
bit Description of Enhanced Options
|
|
7 Alarm/warning flags
|
|
6 TX_DISABLE control and monitoring
|
|
5 TX_FAULT monitoring
|
|
4 RX_LOS monitoring
|
|
3 RATE_SELECT control and monitoring
|
|
2 Application Select control SFF-8079
|
|
1 Soft Rate Select per per SFF-8431
|
|
0 Reserved
|
|
"
|
|
::= { hwXponNniOpticsModuleInfoEntry 23 }
|
|
|
|
hwXponNniOpticsModuleInfoCcBase OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the check code for Base ID Fields."
|
|
::= { hwXponNniOpticsModuleInfoEntry 24 }
|
|
|
|
hwXponNniOpticsModuleInfoCcExt OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the check code for the Extended ID Fields."
|
|
::= { hwXponNniOpticsModuleInfoEntry 25 }
|
|
|
|
hwXponNniOpticsModuleInfoRateIdentifier OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undefined1(1),
|
|
sff8079(2),
|
|
sff8431Rx(3),
|
|
undefined2(4),
|
|
sff8431Tx(5),
|
|
undefined3(6),
|
|
sff8431IndependentRxAndTx(7),
|
|
undefined4(8),
|
|
fcpi5Rx(9),
|
|
undefined5(10),
|
|
fcpi5IndependentRxAndTx(11),
|
|
invalid(-1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the code for connector type.
|
|
Options:
|
|
1. undefined1(1) - Not included or undefined
|
|
2. sff8079(2) - SFF-8079 4/2/1GRate_Select&AS0/AS1
|
|
3. sff8431Rx(3) - SFF-8431 8/4/2G Rx Rate_Select only
|
|
4. undefined2(4) - Not included or undefined
|
|
5. sff8431Tx(5) - SFF-8431 8/4/2G Tx Rate_Select only
|
|
6. undefined3(6) - Not included or undefined
|
|
7. sff8431IndependentRxAndTx(7) - SFF-8431 8/4/2G Independent Rx&Tx Rate_select
|
|
8. undefined4(8) - Not included or undefined
|
|
9. fcpi5Rx(9) - FC-PI-516/8/4G Rx Rate_select only High=16G only Low=8G/4G
|
|
10. undefined5(10) - Not included or undefined
|
|
11. fcpi5IndependentRxAndTx(11) - FC-PI-5 16/8/4G Independent Rx&Tx Rate_select High=16G only Low=8G/4G
|
|
12. invalid(-1) - Indicates that the query fails or no information is detected
|
|
"
|
|
::= { hwXponNniOpticsModuleInfoEntry 26 }
|
|
|
|
-- trapVboids define
|
|
hwPortHostmode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
geMode(7),
|
|
adaptMode(27),
|
|
gponMode(114),
|
|
eponMode(115)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port host mode.
|
|
Options:
|
|
1. geMode(7) - Ge mode
|
|
2. adaptMode(27) - Adapt mode
|
|
3. gponMode(114) - Gpon mode
|
|
4. eponMode(115) - Epon mode
|
|
"
|
|
::= { hwLineCommonTrapsVbOids 1 }
|
|
|
|
hwPortActualmode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
geMode(7),
|
|
adaptMode(27),
|
|
gponMode(114),
|
|
eponMode(115),
|
|
unknown(65535)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port actual mode.
|
|
Options:
|
|
1. geMode(7) - Ge mode
|
|
2. adaptMode(27) - Adapt mode
|
|
3. gponMode(114) - Gpon mode
|
|
4. eponMode(115) - Epon mode
|
|
5. unknown(65535) - Unknown mode
|
|
"
|
|
::= { hwLineCommonTrapsVbOids 2 }
|
|
|
|
hwReservedValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reserved value."
|
|
::= { hwLineCommonTrapsVbOids 3 }
|
|
|
|
-- alarm trap define
|
|
hwPortTypeAdaptFaultAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwPortHostmode,
|
|
hwPortActualmode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port type adaptation fault alarm trap.
|
|
This trap message is generated when the uplink port on the ONU is set to work in adaptive mode,
|
|
the type of the OLT downlink port transmitting the optical signal is different from the type of
|
|
the uplink port on the ONU. As a result, the uplink port on the ONU is faulty.
|
|
"
|
|
::= { hwLineAlarmTraps 0 1 }
|
|
|
|
hwPortTypeAdaptFaultRestoreAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwPortHostmode,
|
|
hwPortActualmode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port type adaptation fault recovery alarm trap.
|
|
This trap message is generated when the uplink port on the ONU is set to work in adaptive mode,
|
|
the type of the OLT downlink port transmitting the optical signal is the same as the type of
|
|
the uplink port on the ONU, and the service on the uplink port is restored.
|
|
"
|
|
::= { hwLineAlarmTraps 0 2 }
|
|
|
|
hwPortTypeAdaptSuccessAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwPortHostmode,
|
|
hwPortActualmode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port type adaptation success alarm trap.
|
|
This trap message is generated when the type of the OLT downlink port transmitting the optical signal changes,
|
|
the adaptation of the uplink port on the ONU is successful.
|
|
"
|
|
::= { hwLineAlarmTraps 0 3 }
|
|
|
|
hwXponnniPortSwitchAlarmTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwFrameIndex,
|
|
hwSlotIndex,
|
|
hwPortIndex,
|
|
hwPortIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protection switchover occurs on the PON port and it has no effect on the service.
|
|
The first hwPortIndex is the source port index,
|
|
the second hwPortIndex is the destination port index.
|
|
"
|
|
::= { hwLineAlarmTraps 0 4 }
|
|
|
|
-- common trap define
|
|
hwXponnniPortSwitchTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
hwReservedValue,
|
|
ifIndex,
|
|
ifIndex
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"TypeC or TypeD port switch trap.
|
|
The first ifIndex is the active one after switching over.
|
|
The second ifIndex is the standby one after switching over.
|
|
"
|
|
::= { hwLineTraps 0 1 }
|
|
|
|
END
|