Observium_CE/mibs/ericsson/RBN-SUBSCRIBER-ACTIVE-MIB

1805 lines
55 KiB
Plaintext

-- *****************************************************************
-- RBN-SUBSCRIBER-ACTIVE-MIB Redback SUBSCRIBER MIB for active
-- subscribers
--
-- Copyright (c) 2012 Ericsson AB.
-- All rights reserved.
--
-- *****************************************************************
RBN-SUBSCRIBER-ACTIVE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Gauge32,
Integer32,
Counter32,
Counter64,
Unsigned32,
zeroDotZero,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
DateAndTime,
TruthValue,
TimeStamp,
RowPointer
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
vacmContextName
FROM SNMP-VIEW-BASED-ACM-MIB
InetAddressType,
InetAddress,
InetAddressPrefixLength
FROM INET-ADDRESS-MIB
RbnCircuitHandle,
RbnPortMediumType,
RbnPercentage
FROM RBN-TC
rbnMgmt
FROM RBN-SMI;
rbnSubscriberActiveMib MODULE-IDENTITY
LAST-UPDATED "201302270000Z" -- Feb 27, 2013
ORGANIZATION "Redback Networks, Inc."
CONTACT-INFO
" Redback Networks, Inc.
Postal: 300 Holger Way
San Jose, CA 95134
USA
Phone: +1 408 750 5000
Fax: +1 408 750 5599
E-mail: mib-info@redback.com
"
DESCRIPTION
"Defines the objects necessary to support the management of
active subscribers in Redback product family.
All mib objects, except rbnSubsCntxtCountTable, defined in
the module are viewed within the context identified in the
SNMP protocol (i.e. the community string in v1/v2c or the
contextName in v3).
"
REVISION "201302270000Z" -- Feb 27, 2013
DESCRIPTION
" Changed the following not-accessible objects to read-only
rbnSubsActiveIpAddrType
rbnSubsActiveIpAddr
rbnSubsActiveIpPfxLen"
REVISION "201209040000Z" -- Sep 4, 2012
DESCRIPTION
" Add rbnSubsIPv4OctetsSent
rbnSubsIPv4OctetsReceived,
rbnSubsIPv6OctetsSent,
rbnSubsIPv6OctetsReceived,
rbnSubsIPv4PktsSent,
rbnSubsIPv4PktsReceived,
rbnSubsIPv6PktsSent,
rbnSubsIPv6PktsReceived,
rbnSubsIPv4McastOctetsSent,
rbnSubsIPv4McastOctetsReceived,
rbnSubsIPv6McastOctetsSent,
rbnSubsIPv6McastOctetsReceived,
rbnSubsIPv4McastPktsSent,
rbnSubsIPv4McastPktsReceived,
rbnSubsIPv6McastPktsSent,
rbnSubsIPv6McastPktsReceived to RbnSubsStatsEntry table
rbnSubsServiceIPv4VolumeOctetsIn,
rbnSubsServiceIPv4VolumeOctetsOut,
rbnSubsServiceIPv6VolumeOctetsIn,
rbnSubsServiceIPv6VolumeOctetsOut,
rbnSubsServiceIPv4VolumePktsIn,
rbnSubsServiceIPv4VolumePktsOut,
rbnSubsServiceIPv6VolumePktsIn,
rbnSubsServiceIPv6VolumePktsOut to RbnSubsServiceVolumeEntry table"
REVISION "201002010000Z" -- Feb 1, 2010
DESCRIPTION
"Add rbnSubsActiveSessionTable,
rbnSubsActiveIpAddrTable
Update ORGANIZATION/CONTACT-INFO. "
REVISION "200901191800Z" -- Jan 19, 2009
DESCRIPTION
"Add rbnSubsActiveResendSvcAcct to rbnSubsActiveEntry."
REVISION "200812031800Z" -- Dec 3, 2008
DESCRIPTION
"Add rbnSubsMaxSupportedSessions, rbnSubsLicensedSessions,
rbnSubsActiveSessions, and rbnSubsCapacityPercentageUsed.
Defined rbnSubsCompliance5 and rbnSubsLicenseGroup
for compliance.
Deprecated rbnSubsCompliance4 and obsoleted rbnSubsCompliance3."
REVISION "200705241800Z" -- May 24, 2007
DESCRIPTION
"Add rbnSubsConfigErrorEvent notification along with the associated
objects. Defined rbnSubsNotifyObjectGroup and rbnSubsNotifyGroup
for compliance."
REVISION "200705091800Z" -- May 9, 2007
DESCRIPTION
"Add rbnSubsServiceVolumeTable and rbnSubsServicesTable along with
associated objects. Defined rbnSubsCompliance4 and
rbnSubsServicesGroup for compliance.
Deprecated rbnSubsCompliance3 and obsoleted rbnSubsCompliance2."
REVISION "200406281800Z" -- June 28, 2004
DESCRIPTION
"Add rbnSubsActiveNasPortType and rbnSubsActiveMediumType to
RbnSubsActiveEntry. Update conformance objects appropriately."
REVISION "200402021800Z" -- February 2, 2004
DESCRIPTION
"Add objects rbnSubsReauthName and rbnSubsReauthSessionId. These
objects supercede the objects defined in the RBN-SUBSCRIBER-REAUTH-MIB."
REVISION "200311011800Z" -- Nov 1, 2003
DESCRIPTION
"Add rbnSubsActiveResend to rbnSubsActiveEntry.
Add rbnSubsProfileCountTable with objects rbnSubsProfileName and
rbnSubsProfileCount. Updated compliance and groups to reflect
new objects."
REVISION "200306260000Z" -- June 26, 2003
DESCRIPTION
"Initial version."
::= { rbnMgmt 27 }
rbnSubsActiveObjects OBJECT IDENTIFIER ::= { rbnSubscriberActiveMib 1 }
rbnSubsActiveConformance OBJECT IDENTIFIER ::= { rbnSubscriberActiveMib 2 }
rbnSubsActiveNotifications OBJECT IDENTIFIER ::= { rbnSubscriberActiveMib 3 }
--
-- Textual Conventions
--
--
-- some structure for the mib objects
--
rbnSubsActive OBJECT IDENTIFIER ::= { rbnSubsActiveObjects 1 }
rbnSubsStats OBJECT IDENTIFIER ::= { rbnSubsActiveObjects 2 }
rbnSubsNotify OBJECT IDENTIFIER ::= { rbnSubsActiveObjects 3 }
--
-- ACTIVE Subscribers
--
rbnSubsActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbnSubsActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains subscriber sessions which have been
authenticated on an circuit."
::= { rbnSubsActive 1 }
rbnSubsActiveEntry OBJECT-TYPE
SYNTAX RbnSubsActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the rbnSubsActiveTable."
INDEX { rbnSubsActiveName, rbnSubsActiveSessionId }
::= { rbnSubsActiveTable 1 }
RbnSubsActiveEntry ::= SEQUENCE {
rbnSubsActiveName SnmpAdminString,
rbnSubsActiveSessionId SnmpAdminString,
rbnSubsActiveCircuitDescr SnmpAdminString,
rbnSubsActiveCircuitHandle RbnCircuitHandle,
rbnSubsActiveStartTime DateAndTime,
rbnSubsActiveClear TruthValue,
rbnSubsActiveResend TruthValue,
rbnSubsActiveNasPortType Unsigned32,
rbnSubsActiveMediumType RbnPortMediumType,
rbnSubsActiveResendSvcAcct TruthValue
}
rbnSubsActiveName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..80))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name identifying this entry. An entry configured
by other means may have been given a name whose length is
greater than 80. Names which exceed this length
are not accessible via SNMP operations."
::= { rbnSubsActiveEntry 1 }
rbnSubsActiveSessionId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value that uniquely identifies an active subscriber
session. If RADIUS is being used to configure/authenticate
subscribers, this value will appear in the RADIUS
Acct-Session-Id attribute."
REFERENCE "Rigney, C., RADIUS Accounting, RFC 2866, June 2000"
::= { rbnSubsActiveEntry 2 }
rbnSubsActiveCircuitDescr OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string which provides identifying information (e.g
slot/port) of the circuit the subscriber is using."
::= { rbnSubsActiveEntry 3}
rbnSubsActiveCircuitHandle OBJECT-TYPE
SYNTAX RbnCircuitHandle
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value for identifying circuits."
::= { rbnSubsActiveEntry 4 }
rbnSubsActiveStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the subscriber became active."
::= { rbnSubsActiveEntry 5 }
rbnSubsActiveClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to 'true' will clear the active
subscriber session. In the case of PPP, the PPP state
machinery attempts to renegotiate and re-authenticate a new
session with the remote peer on the circuit. In the case of
RFC 1483 encapsulated circuits the session is brought down
and then back up and an attempt is made to re-authenticate
the subscriber.
An SNMP get operation always returns 'false'"
::= { rbnSubsActiveEntry 6 }
rbnSubsActiveResend OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to 'true' will cause a resend of the
Radius acct-start packet.
An SNMP get operation always returns 'false'"
::= { rbnSubsActiveEntry 7 }
rbnSubsActiveNasPortType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The RADIUS attribute NAS-Port-Type which indicates the type of the
physical port which is authenticating the user."
REFERENCE "Rigney, C., Rubens, A., Simpson, W., and Willens, S., Remote
Authentication Dial In User Service (RADIUS), RFC 2865, June 2000"
::= { rbnSubsActiveEntry 8 }
rbnSubsActiveMediumType OBJECT-TYPE
SYNTAX RbnPortMediumType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The medium type of the NAS-Port."
::= { rbnSubsActiveEntry 9 }
rbnSubsActiveResendSvcAcct OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this value to 'true' will cause a resend of the
Radius acct-start packet for all services associated with
the active subscriber session.
An SNMP get operation always returns 'false'"
::= { rbnSubsActiveEntry 10 }
--
-- Active IP Addresses
--
rbnSubsActiveIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbnSubsActiveIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains IP addresses used by active subscribers."
::= { rbnSubsActive 2 }
rbnSubsActiveIpEntry OBJECT-TYPE
SYNTAX RbnSubsActiveIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the rbnSubsActiveIpTable."
INDEX { rbnSubsActiveName,
rbnSubsActiveSessionId,
rbnSubsActiveAddrType,
rbnSubsActiveAddr }
::= { rbnSubsActiveIpTable 1 }
RbnSubsActiveIpEntry ::= SEQUENCE {
rbnSubsActiveAddrType InetAddressType,
rbnSubsActiveAddr InetAddress
}
rbnSubsActiveAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of rbnSubsActiveAddr. "
::= { rbnSubsActiveIpEntry 1 }
rbnSubsActiveAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4 | 16 | 20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The host IP address of the active subscriber."
::= { rbnSubsActiveIpEntry 2 }
--
-- Subscriber Session List
--
rbnSubsActiveSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbnSubsActiveSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains active subscriber sessions which have been
authenticated on an circuit."
::= { rbnSubsActive 6 }
rbnSubsActiveSessionEntry OBJECT-TYPE
SYNTAX RbnSubsActiveSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the rbnSubsActiveSessionTable."
INDEX { rbnSubsActiveSessionId }
::= { rbnSubsActiveSessionTable 1 }
RbnSubsActiveSessionEntry ::= SEQUENCE {
rbnSubsActiveSessionSubscriberName SnmpAdminString,
rbnSubsActiveSessionPointer RowPointer
}
rbnSubsActiveSessionSubscriberName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE (1..256))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber name associated with this session."
::= { rbnSubsActiveSessionEntry 1 }
rbnSubsActiveSessionPointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A pointer to the row in rbnSubsActiveTable to which this session
belongs. May be {0 0} if there is no such row."
DEFVAL { zeroDotZero }
::= { rbnSubsActiveSessionEntry 2 }
--
-- Active IPv4/v6 Addresses
--
rbnSubsActiveIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbnSubsActiveIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains IPv4/IPv6 addresses used by active
subscriber sessions. "
::= { rbnSubsActive 7 }
rbnSubsActiveIpAddrEntry OBJECT-TYPE
SYNTAX RbnSubsActiveIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the rbnSubsActiveIpAddrTable."
INDEX { rbnSubsActiveSessionId,
rbnSubsActiveIpAddrType,
rbnSubsActiveIpAddr,
rbnSubsActiveIpPfxLen }
::= { rbnSubsActiveIpAddrTable 1 }
RbnSubsActiveIpAddrEntry ::= SEQUENCE {
rbnSubsActiveIpAddrType InetAddressType,
rbnSubsActiveIpAddr InetAddress,
rbnSubsActiveIpPfxLen InetAddressPrefixLength,
rbnSubsActiveIpAddrDescr SnmpAdminString
}
rbnSubsActiveIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of rbnSubsActiveIpAddr."
::= { rbnSubsActiveIpAddrEntry 1 }
rbnSubsActiveIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address prefix. The address type of this object is specified
in rbnSubsActiveIpAddrType. The length of this object is the
standard length for objects of that type (4 or 16 bytes).
Any bits after rbnSubsActiveIpPfxLen must be zero. "
REFERENCE "[RFC4291] IP Version 6 Addressing Architectur
[RFC4632] Classless Inter-domain Routing (CIDR):
The Internet Address Assignment and Aggregation Plan"
::= { rbnSubsActiveIpAddrEntry 2 }
rbnSubsActiveIpPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix length associated with this prefix. For IPv4 active
subscriber session, the prefix length is always 32."
::= { rbnSubsActiveIpAddrEntry 3 }
rbnSubsActiveIpAddrDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Human readable textual format of IP address. "
REFERENCE "[RFC4291] 2.2. Text Representation of Addresses"
::= { rbnSubsActiveIpAddrEntry 4 }
--
-- set of clear objects to clear by subscriber name
-- RADIUS acct-session-id, or by ip address.
--
rbnSubsClear OBJECT IDENTIFIER ::= { rbnSubsActive 3 }
rbnSubsClearSubscriberName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to the subscriber name will clear all
the sessions associated with the subscriber.
In the case of PPP circuit, the PPP state machinery attempts
to renegotiate and re-authenticate a new session with the
remote peer on the circuit. In the case of RFC 1483 and RFC
1490 encapsulated circuits the circuit is brought down and
then back up and an attempt is made to re-authenticate the
subscriber bound to the circuit.
This object returns a zero-length string when queried.
"
DEFVAL { "" }
::= { rbnSubsClear 1}
--
-- object to clear subscriber using the RADIUS attribute
-- acct-session-id
--
rbnSubsClearSessionId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A set of this object will clear the subscriber
session identified by this value.
In the case of PPP circuit, the PPP state machinery attempts
to renegotiate and re-authenticate a new session with the
remote peer on the circuit. In the case of RFC 1483 and RFC
1490 encapsulated circuits the circuit is brought down and
then back up and an attempt is made to re-authenticate the
subscriber bound to the circuit.
This object returns a zero-length string when queried.
"
::= { rbnSubsClear 2 }
-- BOUNCE objects
--
rbnSubsBounceName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Each circuit using CLIPS encapsulation used by the named subscriber
is brought down and immediately recreated using the RADIUS Access-
Accept attributes. Any other circuit encapsulation type is cleared.
This object returns a zero-length string when queried."
::= { rbnSubsClear 3}
rbnSubsBounceSessionId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The circuit using CLIPS encapsulation identified by the RADIUS
Acct-Session-Id is brought down and immediately recreated using the
RADIUS Access-Accept attributes. Any other circuit encapsulation
type is cleared.
This object returns a zero-length string when queried."
::= { rbnSubsClear 4 }
--
-- REAUTH objects
--
rbnSubsReauthRadiusIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An unsigned integer identifying a set of subscribers
defined at the RADIUS server which are to be re-authorized.
The source of this value and the set of subscribers to be
re-authorized are defined outside the context of this mib module.
An get of this attribute returns 0."
::= { rbnSubsClear 5}
rbnSubsReauthRadiusID OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..240))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An octet string identifying a set of subscribers
defined at the RADIUS server which are to be re-authorized.
The source of this value and the set of subscribers to be
re-authorized are defined outside the context of this mib module.
This object returns a zero-length string when queried."
::= { rbnSubsClear 6}
rbnSubsReauthName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..80))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to reauthorize all of the active sessions associated
with the given subscriber in the context identified in the
SNMP protocol (i.e. the community string in v1/v2c or the
contextName in v3).
This object returns a zero-length string when queried.
"
::= { rbnSubsClear 7 }
rbnSubsReauthSessionId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to reauthorize the active session identified by the
value of this object and the context identified in the
SNMP protocol (i.e. the community string in v1/v2c or the
contextName in v3).
This object returns a zero-length string when queried.
"
::= { rbnSubsClear 8 }
rbnSubsClearReason OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An unsigned integer value which may be included in the set request
for rbnSubsClearSubscriberName, rbnSubsClearSessionId,
rbnSubsBounceName, rbnSubsBounceSessionId, or any other objects
define under the rbnSubsClear OID node. The use of this object value
is implementation dependent.
This object returns 0 when queried."
::= { rbnSubsClear 9 }
--
--Subscriber Statistics
--
rbnSubsCntxtCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbnSubsCntxtCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains counts of active subscribers by context
name. Unlike any of the other tables in this mib module, all
rows in this table are accessible when the context 'local' is
specified in the snmp message, unless restricted by entries in
the vacmAccessTable. Snmp requests using other contexts shall
return only the row which matches the context."
::= { rbnSubsStats 1 }
rbnSubsCntxtCountEntry OBJECT-TYPE
SYNTAX RbnSubsCntxtCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row containing the count of active subscribers
for each context."
INDEX { vacmContextName }
::= { rbnSubsCntxtCountTable 1 }
RbnSubsCntxtCountEntry::= SEQUENCE {
rbnSubsCntxtCount Gauge32,
rbnSubsCntxtIp4OnlyCount Gauge32,
rbnSubsCntxtIp6OnlyCount Gauge32,
rbnSubsCntxtDualCount Gauge32,
rbnSubsCntxtLacCount Gauge32
}
rbnSubsCntxtCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of active subscribers with either IPv4 or IPv6 or both
stack UP."
::= { rbnSubsCntxtCountEntry 1 }
rbnSubsCntxtIp4OnlyCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of IPv4 active subscribers which are authorized for only
IPv4 protocol stack.
This counter does not include subscribers authorized
for dual IPv4/IPv6 protocol stack. "
::= { rbnSubsCntxtCountEntry 2 }
rbnSubsCntxtIp6OnlyCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of IPv6 active subscribers which are authorized for only
IPv6 protocol stack.
This counter does not include subscribers authorized
for dual IPv4/IPv6 protocol stack. "
::= { rbnSubsCntxtCountEntry 3 }
rbnSubsCntxtDualCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of active subscribers which are authorized for both
IPv4 and IPv6 for the context. At any time either one or both stacks
may be UP. "
::= { rbnSubsCntxtCountEntry 4 }
rbnSubsCntxtLacCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of active LAC subscribers."
::= { rbnSubsCntxtCountEntry 5 }
--
-- Subscriber counts by encapsulation type
--
rbnSubsEncapsCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbnSubsEncapsCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains counts of active subscribers by
encapsulation type."
::= { rbnSubsStats 2 }
rbnSubsEncapsCountEntry OBJECT-TYPE
SYNTAX RbnSubsEncapsCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the rbnSubsEncapsCountTable. "
INDEX { rbnSubsEncapsulationType }
::= { rbnSubsEncapsCountTable 1 }
RbnSubsEncapsCountEntry ::= SEQUENCE {
rbnSubsEncapsulationType INTEGER,
rbnSubsEncapsCount Gauge32
}
rbnSubsEncapsulationType OBJECT-TYPE
SYNTAX INTEGER {
ppp(1),
pppoe(2),
bridged1483(3),
routed1483(4),
multi1483(5),
dot1q1483(6),
dot1qEnet(7),
bridged1490(8),
routed1490(9),
multi1490(10),
dot1q1490(11),
clips(12),
other(255)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the type of encapsulation the
subscriber is using. Note that 'ppp' includes all types of
supported ppp, excluding pppoe."
::= { rbnSubsEncapsCountEntry 1 }
rbnSubsEncapsCount OBJECT-TYPE
SYNTAX Gauge32
UNITS "subscribers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of active subscribers for the encapsulation type."
::= { rbnSubsEncapsCountEntry 2 }
--
-- Statistics
--
rbnSubsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbnSubsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains counters for individual circuits."
::= { rbnSubsStats 3 }
rbnSubsStatsEntry OBJECT-TYPE
SYNTAX RbnSubsStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the rbnSubsStatsTable."
INDEX { rbnSubsActiveName, rbnSubsActiveSessionId }
::= { rbnSubsStatsTable 1 }
RbnSubsStatsEntry ::= SEQUENCE {
rbnSubsOctetsSent Counter64,
rbnSubsOctetsReceived Counter64,
rbnSubsPktsSent Counter64,
rbnSubsPktsReceived Counter64,
rbnSubsXmitOctetsDropped Counter32,
rbnSubsXmitPktsDropped Counter32,
rbnSubsMcastOctetsSent Counter64,
rbnSubsMcastOctetsReceived Counter64,
rbnSubsMcastPktsSent Counter64,
rbnSubsMcastPktsReceived Counter64,
rbnSubsIPv4OctetsSent Counter64,
rbnSubsIPv4OctetsReceived Counter64,
rbnSubsIPv6OctetsSent Counter64,
rbnSubsIPv6OctetsReceived Counter64,
rbnSubsIPv4PktsSent Counter64,
rbnSubsIPv4PktsReceived Counter64,
rbnSubsIPv6PktsSent Counter64,
rbnSubsIPv6PktsReceived Counter64,
rbnSubsIPv4McastOctetsSent Counter64,
rbnSubsIPv4McastOctetsReceived Counter64,
rbnSubsIPv6McastOctetsSent Counter64,
rbnSubsIPv6McastOctetsReceived Counter64,
rbnSubsIPv4McastPktsSent Counter64,
rbnSubsIPv4McastPktsReceived Counter64,
rbnSubsIPv6McastPktsSent Counter64,
rbnSubsIPv6McastPktsReceived Counter64
}
rbnSubsOctetsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets sent by the circuit. This counter includes
multicast activity."
::= { rbnSubsStatsEntry 1 }
rbnSubsOctetsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets received by the circuit. This counter includes
multicast activity."
::= { rbnSubsStatsEntry 2 }
rbnSubsPktsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets sent by the circuit. This counter
includes multicast activity."
::= { rbnSubsStatsEntry 3 }
rbnSubsPktsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received by the circuit. This counter
includes multicast activity."
::= { rbnSubsStatsEntry 4 }
rbnSubsXmitOctetsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets dropped by the circuit before
transmission."
::= { rbnSubsStatsEntry 5 }
rbnSubsXmitPktsDropped OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets dropped by the circuit before
transmission."
::= { rbnSubsStatsEntry 6 }
rbnSubsMcastOctetsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of multicast octets sent by the circuit."
::= { rbnSubsStatsEntry 7 }
rbnSubsMcastOctetsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of multicast octets received by the circuit."
::= { rbnSubsStatsEntry 8 }
rbnSubsMcastPktsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of multicast packets sent by the circuit."
::= { rbnSubsStatsEntry 9 }
rbnSubsMcastPktsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of multicast packets received by the circuit."
::= { rbnSubsStatsEntry 10 }
rbnSubsIPv4OctetsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 octets sent by the circuit. This counter includes
multicast activity."
::= { rbnSubsStatsEntry 11 }
rbnSubsIPv4OctetsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 octets received by the circuit. This counter includes
multicast activity."
::= { rbnSubsStatsEntry 12 }
rbnSubsIPv6OctetsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 octets sent by the circuit. This counter includes
multicast activity."
::= { rbnSubsStatsEntry 13 }
rbnSubsIPv6OctetsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 octets received by the circuit. This counter includes
multicast activity."
::= { rbnSubsStatsEntry 14 }
rbnSubsIPv4PktsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 packets sent by the circuit. This counter
includes multicast activity."
::= { rbnSubsStatsEntry 15 }
rbnSubsIPv4PktsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 packets received by the circuit. This counter
includes multicast activity."
::= { rbnSubsStatsEntry 16 }
rbnSubsIPv6PktsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets sent by the circuit. This counter
includes multicast activity."
::= { rbnSubsStatsEntry 17 }
rbnSubsIPv6PktsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 packets received by the circuit. This counter
includes multicast activity."
::= { rbnSubsStatsEntry 18 }
rbnSubsIPv4McastOctetsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 multicast octets sent by the circuit."
::= { rbnSubsStatsEntry 19 }
rbnSubsIPv4McastOctetsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 multicast octets received by the circuit."
::= { rbnSubsStatsEntry 20 }
rbnSubsIPv6McastOctetsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 multicast octets sent by the circuit."
::= { rbnSubsStatsEntry 21 }
rbnSubsIPv6McastOctetsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 multicast octets received by the circuit."
::= { rbnSubsStatsEntry 22 }
rbnSubsIPv4McastPktsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 multicast packets sent by the circuit."
::= { rbnSubsStatsEntry 23 }
rbnSubsIPv4McastPktsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv4 multicast packets received by the circuit."
::= { rbnSubsStatsEntry 24 }
rbnSubsIPv6McastPktsSent OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 multicast packets sent by the circuit."
::= { rbnSubsStatsEntry 25 }
rbnSubsIPv6McastPktsReceived OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPv6 multicast packets received by the circuit."
::= { rbnSubsStatsEntry 26 }
--
-- Subscriber counts by profile name
--
rbnSubsProfileCountTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbnSubsProfileCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains counts of active subscribers by
encapsulation type."
::= { rbnSubsStats 4 }
rbnSubsProfileCountEntry OBJECT-TYPE
SYNTAX RbnSubsProfileCountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the rbnSubsProfileCountTable. "
INDEX { IMPLIED rbnSubsProfileName }
::= { rbnSubsProfileCountTable 1 }
RbnSubsProfileCountEntry ::= SEQUENCE {
rbnSubsProfileName SnmpAdminString,
rbnSubsProfileCount Gauge32
}
rbnSubsProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..80))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The profile name which applies to a set of subscribers."
::= { rbnSubsProfileCountEntry 1 }
rbnSubsProfileCount OBJECT-TYPE
SYNTAX Gauge32
UNITS "subscribers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of active subscribers for the profile name."
::= { rbnSubsProfileCountEntry 2 }
--
-- Subscriber software license
--
rbnSubsLicense OBJECT IDENTIFIER ::= { rbnSubsStats 5 }
rbnSubsMaxSupportedSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active subscriber sessions that
are supported on the SmartEdge router."
::= { rbnSubsLicense 1 }
rbnSubsLicensedSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of licensed subscriber sessions on the
SmartEdge router."
::= { rbnSubsLicense 2 }
rbnSubsActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active subscriber sessions on the SmartEdge
router."
::= { rbnSubsLicense 3 }
rbnSubsCapacityPercentageUsed OBJECT-TYPE
SYNTAX RbnPercentage
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The percentage of licensed subscriber sessions in use
on the SmartEdge router. This value is computed as:
if rbnSubsLicensedSessions equals 0 then
if rbnSubsActiveSessions equals 0 then 0 else 100
else
MIN((rbnSubsActiveSessions * 100)/rbnSubsLicensedSessions), 100)."
::= { rbnSubsLicense 4 }
--
-- Services Volume Limits
--
rbnSubsServiceVolumeTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbnSubsServiceVolumeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies service volume information on
the subscriber circuits. It contains the volume octet
counts for each active subscriber session for which the
service is active.
All MIB objects defined in the table are viewed within the
context identified in the SNMP protocol (i.e. the community
string in v1/v2c or the contextName in v3)."
::= { rbnSubsActive 4 }
rbnSubsServiceVolumeEntry OBJECT-TYPE
SYNTAX RbnSubsServiceVolumeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the RbnSubsServiceVolumeTable. Each
row contains the service volume limit and volume octet count
for each active service session."
INDEX { rbnSubsActiveName,
rbnSubsActiveSessionId,
rbnSubsServiceIndex }
::= { rbnSubsServiceVolumeTable 1 }
RbnSubsServiceVolumeEntry ::= SEQUENCE {
rbnSubsServiceVolumeLimitIn Unsigned32,
rbnSubsServiceVolumeLimitOut Unsigned32,
rbnSubsServiceActiveTime TimeStamp,
rbnSubsServiceVolumeOctetsIn Counter64,
rbnSubsServiceVolumeOctetsOut Counter64,
rbnSubsServiceVolumePktsIn Counter64,
rbnSubsServiceVolumePktsOut Counter64,
rbnSubsServiceIPv4VolumeOctetsIn Counter64,
rbnSubsServiceIPv4VolumeOctetsOut Counter64,
rbnSubsServiceIPv6VolumeOctetsIn Counter64,
rbnSubsServiceIPv6VolumeOctetsOut Counter64,
rbnSubsServiceIPv4VolumePktsIn Counter64,
rbnSubsServiceIPv4VolumePktsOut Counter64,
rbnSubsServiceIPv6VolumePktsIn Counter64,
rbnSubsServiceIPv6VolumePktsOut Counter64
}
rbnSubsServiceVolumeLimitIn OBJECT-TYPE
SYNTAX Unsigned32
UNITS "KiloBytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The volume limit in kilobytes (KB) allowed for the subscriber
service to input (or receive) for this subscriber. If
the value is 0, then there is no limit."
::= { rbnSubsServiceVolumeEntry 1 }
rbnSubsServiceVolumeLimitOut OBJECT-TYPE
SYNTAX Unsigned32
UNITS "KiloBytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The volume limit in kilobytes (KB) allowed for the subscriber
service to output (or transmit) for this subscriber. If
the value is 0, then there is no limit."
::= { rbnSubsServiceVolumeEntry 2 }
rbnSubsServiceActiveTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the service became active for this
subscriber.
If sysUpTime is reset to zero as a result of a reinitialization
of the network management (sub)system, then the values of all
TimeStamp objects are also reset."
::= { rbnSubsServiceVolumeEntry 3 }
rbnSubsServiceVolumeOctetsIn OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume octets in count. "
::= { rbnSubsServiceVolumeEntry 4 }
rbnSubsServiceVolumeOctetsOut OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume octets out count."
::= { rbnSubsServiceVolumeEntry 5 }
rbnSubsServiceVolumePktsIn OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume packet in count. "
::= { rbnSubsServiceVolumeEntry 6 }
rbnSubsServiceVolumePktsOut OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume packet out count. "
::= { rbnSubsServiceVolumeEntry 7 }
rbnSubsServiceIPv4VolumeOctetsIn OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume IPv4 octets in count. "
::= { rbnSubsServiceVolumeEntry 8 }
rbnSubsServiceIPv4VolumeOctetsOut OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume IPv4 octets out count."
::= { rbnSubsServiceVolumeEntry 9 }
rbnSubsServiceIPv6VolumeOctetsIn OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume IPv6 octets in count. "
::= { rbnSubsServiceVolumeEntry 10 }
rbnSubsServiceIPv6VolumeOctetsOut OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume IPv6 octets out count."
::= { rbnSubsServiceVolumeEntry 11 }
rbnSubsServiceIPv4VolumePktsIn OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume IPv4 packet in count. "
::= { rbnSubsServiceVolumeEntry 12 }
rbnSubsServiceIPv4VolumePktsOut OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume IPv4 packet out count. "
::= { rbnSubsServiceVolumeEntry 13 }
rbnSubsServiceIPv6VolumePktsIn OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume IPv6 packet in count. "
::= { rbnSubsServiceVolumeEntry 14 }
rbnSubsServiceIPv6VolumePktsOut OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subscriber session volume IPv6 packet out count. "
::= { rbnSubsServiceVolumeEntry 15 }
--
-- Services Table
--
rbnSubsServicesTable OBJECT-TYPE
SYNTAX SEQUENCE OF RbnSubsServicesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains services available to subscribers."
::= { rbnSubsActive 5 }
rbnSubsServicesEntry OBJECT-TYPE
SYNTAX RbnSubsServicesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the rbnSubsServicesTable. "
INDEX { rbnSubsServiceIndex }
::= { rbnSubsServicesTable 1 }
RbnSubsServicesEntry ::= SEQUENCE {
rbnSubsServiceIndex Integer32,
rbnSubsServiceName SnmpAdminString,
rbnSubsServiceTag SnmpAdminString
}
rbnSubsServiceIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique index assigned to the entry."
::= { rbnSubsServicesEntry 1}
rbnSubsServiceName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(1..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name identifying the service."
::= { rbnSubsServicesEntry 2}
rbnSubsServiceTag OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A tag associated with the service name which may provide
additional qualification to the name."
::= { rbnSubsServicesEntry 3}
--
-- Subscriber notification objects
--
rbnSubsNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object will provide a mechanism for enabling and
disabling subscriber notifications. A value of 1 (true)
indicates that subscriber notifications are enabled.
A value of 2 (false) indicates that subscriber
notifications are disabled."
DEFVAL { true }
::= { rbnSubsNotify 1 }
rbnSubsConfigErrorMsgs OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Detailed error messages that describes the mis-configured
attributes that failed authentication."
::= { rbnSubsNotify 2 }
--
-- NOTIFICATIONS - node for hanging notification definitions
--
rbnSubsNotifyPrefix OBJECT IDENTIFIER
::= { rbnSubsActiveNotifications 0 }
rbnSubsConfigErrorEvent NOTIFICATION-TYPE
OBJECTS {
rbnSubsActiveCircuitHandle,
rbnSubsConfigErrorMsgs
}
STATUS current
DESCRIPTION
"This notification signifies that the subscriber session
received one or more attribute(s) referring non-existing
configuration, and the subscriber session is allowed to
stay up."
::= { rbnSubsNotifyPrefix 1 }
--
-- compliance statements
--
rbnSubsCompliances OBJECT IDENTIFIER ::= { rbnSubsActiveConformance 1 }
rbnSubsGroups OBJECT IDENTIFIER ::= { rbnSubsActiveConformance 2 }
rbnSubsCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for SNMP entities which implement
the Redback Subscriber MIB.
This compliance is replaced by rbnSubsCompliance2"
MODULE -- this module
MANDATORY-GROUPS {
rbnSubsActiveGroup,
rbnSubsStatsGroup
}
::= { rbnSubsCompliances 1}
rbnSubsCompliance2 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for SNMP entities which implement
the Redback Subscriber MIB.
This compliance is replaced by rbnSubsCompliance3"
MODULE -- this module
MANDATORY-GROUPS {
rbnSubsActiveGroup2,
rbnSubsStatsGroup2
}
::= { rbnSubsCompliances 2}
rbnSubsCompliance3 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for SNMP entities which implement
the Redback Subscriber MIB.
This compliance is replaced by rbnSubsCompliance4."
MODULE -- this module
MANDATORY-GROUPS {
rbnSubsActiveGroup3,
rbnSubsStatsGroup2
}
::= { rbnSubsCompliances 3}
rbnSubsCompliance4 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for SNMP entities which implement
the Redback Subscriber MIB. "
MODULE -- this module
MANDATORY-GROUPS {
rbnSubsActiveGroup3,
rbnSubsStatsGroup2,
rbnSubsServicesGroup,
rbnSubsNotifyObjectGroup,
rbnSubsNotifyGroup
}
::= { rbnSubsCompliances 4}
rbnSubsCompliance5 MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for SNMP entities which implement
the Redback Subscriber MIB. "
MODULE -- this module
MANDATORY-GROUPS {
rbnSubsActiveGroup3,
rbnSubsStatsGroup2,
rbnSubsServicesGroup,
rbnSubsNotifyObjectGroup,
rbnSubsNotifyGroup,
rbnSubsLicenseGroup
}
::= { rbnSubsCompliances 5}
rbnSubsCompliance6 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
the Redback Subscriber MIB. "
MODULE -- this module
MANDATORY-GROUPS {
rbnSubsActiveGroup4,
rbnSubsStatsGroup3,
rbnSubsServicesGroup,
rbnSubsNotifyObjectGroup,
rbnSubsNotifyGroup,
rbnSubsLicenseGroup
}
::= { rbnSubsCompliances 6}
--
-- groupings
--
rbnSubsActiveGroup OBJECT-GROUP
OBJECTS {
rbnSubsActiveCircuitDescr,
rbnSubsActiveCircuitHandle,
rbnSubsActiveStartTime,
rbnSubsActiveClear,
rbnSubsActiveAddr,
rbnSubsClearSubscriberName,
rbnSubsClearSessionId,
rbnSubsBounceName,
rbnSubsBounceSessionId,
rbnSubsReauthRadiusIndex,
rbnSubsReauthRadiusID,
rbnSubsClearReason
}
STATUS obsolete
DESCRIPTION
"The collection of objects which represent an active subscriber.
This group is replaced by rbnSubsActiveGroup2."
::= { rbnSubsGroups 1 }
rbnSubsStatsGroup OBJECT-GROUP
OBJECTS {
rbnSubsCntxtCount,
rbnSubsEncapsCount,
rbnSubsOctetsSent,
rbnSubsOctetsReceived,
rbnSubsPktsSent,
rbnSubsPktsReceived,
rbnSubsXmitOctetsDropped,
rbnSubsXmitPktsDropped,
rbnSubsMcastOctetsSent,
rbnSubsMcastOctetsReceived,
rbnSubsMcastPktsSent,
rbnSubsMcastPktsReceived
}
STATUS obsolete
DESCRIPTION
"The collection of objects which are generic counters of
subscriber activity.
This group is replaced by rbnSubsStatsGroup2"
::= { rbnSubsGroups 2 }
rbnSubsActiveGroup2 OBJECT-GROUP
OBJECTS {
rbnSubsActiveCircuitDescr,
rbnSubsActiveCircuitHandle,
rbnSubsActiveStartTime,
rbnSubsActiveClear,
rbnSubsActiveAddr,
rbnSubsClearSubscriberName,
rbnSubsClearSessionId,
rbnSubsBounceName,
rbnSubsBounceSessionId,
rbnSubsReauthRadiusIndex,
rbnSubsReauthRadiusID,
rbnSubsReauthName,
rbnSubsReauthSessionId,
rbnSubsClearReason,
rbnSubsActiveResend
}
STATUS deprecated
DESCRIPTION
"The collection of objects which represent an active subscriber."
::= { rbnSubsGroups 3 }
rbnSubsStatsGroup2 OBJECT-GROUP
OBJECTS {
rbnSubsCntxtCount,
rbnSubsEncapsCount,
rbnSubsOctetsSent,
rbnSubsOctetsReceived,
rbnSubsPktsSent,
rbnSubsPktsReceived,
rbnSubsXmitOctetsDropped,
rbnSubsXmitPktsDropped,
rbnSubsMcastOctetsSent,
rbnSubsMcastOctetsReceived,
rbnSubsMcastPktsSent,
rbnSubsMcastPktsReceived,
rbnSubsProfileCount
}
STATUS current
DESCRIPTION
"The collection of objects which are generic counters of
subscriber activity."
::= { rbnSubsGroups 4 }
rbnSubsActiveGroup3 OBJECT-GROUP
OBJECTS {
rbnSubsActiveCircuitDescr,
rbnSubsActiveCircuitHandle,
rbnSubsActiveStartTime,
rbnSubsActiveClear,
rbnSubsActiveAddr,
rbnSubsActiveNasPortType,
rbnSubsActiveMediumType,
rbnSubsClearSubscriberName,
rbnSubsClearSessionId,
rbnSubsBounceName,
rbnSubsBounceSessionId,
rbnSubsReauthRadiusIndex,
rbnSubsReauthRadiusID,
rbnSubsReauthName,
rbnSubsReauthSessionId,
rbnSubsClearReason,
rbnSubsActiveResend
}
STATUS current
DESCRIPTION
"The collection of objects which represent an active subscriber.
This collection includes the objects rbnSubsActiveNasPortType and
rbnSubsActiveMediumType."
::= { rbnSubsGroups 5 }
rbnSubsServicesGroup OBJECT-GROUP
OBJECTS {
rbnSubsServiceName,
rbnSubsServiceTag,
rbnSubsServiceVolumeLimitIn,
rbnSubsServiceVolumeLimitOut,
rbnSubsServiceActiveTime,
rbnSubsServiceVolumeOctetsIn,
rbnSubsServiceVolumeOctetsOut,
rbnSubsServiceVolumePktsIn,
rbnSubsServiceVolumePktsOut,
rbnSubsServiceIPv4VolumeOctetsIn,
rbnSubsServiceIPv4VolumeOctetsOut,
rbnSubsServiceIPv6VolumeOctetsIn,
rbnSubsServiceIPv6VolumeOctetsOut,
rbnSubsServiceIPv4VolumePktsIn,
rbnSubsServiceIPv4VolumePktsOut,
rbnSubsServiceIPv6VolumePktsIn,
rbnSubsServiceIPv6VolumePktsOut
}
STATUS current
DESCRIPTION
"The collection of objects which represent Service Volume attributes."
::= { rbnSubsGroups 6 }
rbnSubsNotifyObjectGroup OBJECT-GROUP
OBJECTS {
rbnSubsNotifyEnable,
rbnSubsConfigErrorMsgs
}
STATUS current
DESCRIPTION
"The collection of objects related to subscriber notifications."
::= { rbnSubsGroups 7 }
rbnSubsNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {
rbnSubsConfigErrorEvent
}
STATUS current
DESCRIPTION
"Notification for tracking the failed attributes of subscriber active
sessions."
::= { rbnSubsGroups 8 }
rbnSubsLicenseGroup OBJECT-GROUP
OBJECTS {
rbnSubsMaxSupportedSessions,
rbnSubsLicensedSessions,
rbnSubsActiveSessions,
rbnSubsCapacityPercentageUsed
}
STATUS current
DESCRIPTION
"The collection of objects related to subscriber licenses."
::= { rbnSubsGroups 9 }
rbnSubsActiveGroup4 OBJECT-GROUP
OBJECTS {
rbnSubsActiveCircuitDescr,
rbnSubsActiveCircuitHandle,
rbnSubsActiveStartTime,
rbnSubsActiveClear,
rbnSubsActiveAddr,
rbnSubsActiveNasPortType,
rbnSubsActiveMediumType,
rbnSubsActiveResendSvcAcct,
rbnSubsClearSubscriberName,
rbnSubsActiveSessionSubscriberName,
rbnSubsActiveSessionPointer,
rbnSubsActiveIpAddrDescr,
rbnSubsClearSessionId,
rbnSubsBounceName,
rbnSubsBounceSessionId,
rbnSubsReauthRadiusIndex,
rbnSubsReauthRadiusID,
rbnSubsReauthName,
rbnSubsReauthSessionId,
rbnSubsClearReason,
rbnSubsActiveResend
}
STATUS current
DESCRIPTION
"The collection of objects which represent an active subscriber.
This collection includes the objects rbnSubsActiveNasPortType and
rbnSubsActiveMediumType."
::= { rbnSubsGroups 10 }
rbnSubsStatsGroup3 OBJECT-GROUP
OBJECTS {
rbnSubsCntxtCount,
rbnSubsCntxtIp4OnlyCount,
rbnSubsCntxtIp6OnlyCount,
rbnSubsCntxtDualCount,
rbnSubsCntxtLacCount,
rbnSubsEncapsCount,
rbnSubsOctetsSent,
rbnSubsOctetsReceived,
rbnSubsPktsSent,
rbnSubsPktsReceived,
rbnSubsXmitOctetsDropped,
rbnSubsXmitPktsDropped,
rbnSubsMcastOctetsSent,
rbnSubsMcastOctetsReceived,
rbnSubsMcastPktsSent,
rbnSubsMcastPktsReceived,
rbnSubsProfileCount,
rbnSubsIPv4OctetsSent,
rbnSubsIPv4OctetsReceived,
rbnSubsIPv6OctetsSent,
rbnSubsIPv6OctetsReceived,
rbnSubsIPv4PktsSent,
rbnSubsIPv4PktsReceived,
rbnSubsIPv6PktsSent,
rbnSubsIPv6PktsReceived,
rbnSubsIPv4McastOctetsSent,
rbnSubsIPv4McastOctetsReceived,
rbnSubsIPv6McastOctetsSent,
rbnSubsIPv6McastOctetsReceived,
rbnSubsIPv4McastPktsSent,
rbnSubsIPv4McastPktsReceived,
rbnSubsIPv6McastPktsSent,
rbnSubsIPv6McastPktsReceived
}
STATUS current
DESCRIPTION
"The collection of objects which are generic counters of
subscriber activity."
::= { rbnSubsGroups 11 }
END