WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/ekinops/EKINOPS-Pmoailhcs-MIB

4508 lines
120 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

-- *****************************************************************
-- EKINOPS-pmoailhcs.TXT: MIB
--
--MIB Part Number:3MI00212AAAC
--MIB Version:01
--
-- Copyright (c) 2016 by Ekinops
-- All rights reserved.
--
-- *****************************************************************
EKINOPS-Pmoailhcs-MIB DEFINITIONS ::= BEGIN
IMPORTS
ekinops,
EkiState,
EkiOnOff,
EkiMode,
EkiProtocol,
EkiApiState,
EkiSynchroMode,
EkiMeasureType
FROM EKINOPS-MIB
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Unsigned32,
Integer32,
Counter32,
IpAddress
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString
FROM SNMPv2-TC;
modulepmoailhcs MODULE-IDENTITY
LAST-UPDATED "201605230000Z"
ORGANIZATION "Ekinops"
CONTACT-INFO
"Ekinops
3, rue Blaise Pascal
F-22300 Lannion / FRANCE
Tel : +33 (0)2 96 05 00 30
Fax : +33 (0)2 96 48 62 39
E-mail: support@ekinops.net"
DESCRIPTION
"Creation"
REVISION "201406200000Z"
DESCRIPTION
"Initial Version."
REVISION "201406200000Z"
DESCRIPTION
"Creation"
REVISION "201501270000Z"
DESCRIPTION
"Labels cosmetic updates"
REVISION "201605230000Z"
DESCRIPTION
"New AlarmType – synthesisAlarm (12)"
::= { ekinops 62 }
--- *****************************************************
--- LEAF LEVEL 2
--- *****************************************************
pmoailhcsalarms OBJECT IDENTIFIER ::= { modulepmoailhcs 2 }
pmoailhcsAlmOther OBJECT IDENTIFIER ::= { pmoailhcsalarms 1 }
pmoailhcsAlmOtherNurg OBJECT IDENTIFIER ::= { pmoailhcsAlmOther 1 }
pmoailhcsAlmOtherUrg OBJECT IDENTIFIER ::= { pmoailhcsAlmOther 2 }
pmoailhcsAlmOtherCrit OBJECT IDENTIFIER ::= { pmoailhcsAlmOther 3 }
pmoailhcsAlmClient OBJECT IDENTIFIER ::= { pmoailhcsalarms 2 }
pmoailhcsAlmClientNurg OBJECT IDENTIFIER ::= { pmoailhcsAlmClient 1 }
pmoailhcsAlmClientUrg OBJECT IDENTIFIER ::= { pmoailhcsAlmClient 2 }
pmoailhcsAlmClientCrit OBJECT IDENTIFIER ::= { pmoailhcsAlmClient 3 }
pmoailhcsAlmLine OBJECT IDENTIFIER ::= { pmoailhcsalarms 3 }
pmoailhcsAlmLineNurg OBJECT IDENTIFIER ::= { pmoailhcsAlmLine 1 }
pmoailhcsAlmLineUrg OBJECT IDENTIFIER ::= { pmoailhcsAlmLine 2 }
pmoailhcsAlmLineCrit OBJECT IDENTIFIER ::= { pmoailhcsAlmLine 3 }
pmoailhcsmeasures OBJECT IDENTIFIER ::= { modulepmoailhcs 3 }
pmoailhcsMesrOther OBJECT IDENTIFIER ::= { pmoailhcsmeasures 1 }
pmoailhcsMesrClient OBJECT IDENTIFIER ::= { pmoailhcsmeasures 2 }
pmoailhcsMesrLine OBJECT IDENTIFIER ::= { pmoailhcsmeasures 3 }
pmoailhcscounters OBJECT IDENTIFIER ::= { modulepmoailhcs 4 }
pmoailhcsCntOther OBJECT IDENTIFIER ::= { pmoailhcscounters 1 }
pmoailhcsCntClient OBJECT IDENTIFIER ::= { pmoailhcscounters 2 }
pmoailhcsCntLine OBJECT IDENTIFIER ::= { pmoailhcscounters 3 }
pmoailhcscontrolsWrite OBJECT IDENTIFIER ::= { modulepmoailhcs 6 }
pmoailhcsCtrlOther OBJECT IDENTIFIER ::= { pmoailhcscontrolsWrite 1 }
pmoailhcsCtrlClient OBJECT IDENTIFIER ::= { pmoailhcscontrolsWrite 2 }
pmoailhcsCtrlLine OBJECT IDENTIFIER ::= { pmoailhcscontrolsWrite 3 }
pmoailhcsri OBJECT IDENTIFIER ::= { modulepmoailhcs 7 }
pmoailhcsConfig OBJECT IDENTIFIER ::= { modulepmoailhcs 9 }
pmoailhcstraps OBJECT IDENTIFIER ::= { modulepmoailhcs 10 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- TEXTUAL-CONVENTION
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
PmoailhcspreampMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Different modes on OA preamp"
SYNTAX INTEGER {
oailhcspreampdefaultmode(0),
oailhcspreampconstantcurrentmode(1),
oailhcspreampconstantpowermode(2)
oailhcspreampconstantgainmode(3)
oailhcspreamppoutpinmode(4)
oailhcspreampmanualmode(5)
oailhcspreampfeedforwardmode(6)
oailhcspreamptransientsupmode(7)
}
PmoailhcsboosterMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Different modes on OA booster"
SYNTAX INTEGER {
oailhcsboosterdefaultmode(0),
oailhcsboosterconstantcurrentmode(1),
oailhcsboosterconstantpowermode(2)
oailhcsboosterconstantgainmode(3)
oailhcsboosterpoutpinmode(4)
oailhcsboostermanualmode(5)
oailhcsboosterfeedforwardmode(6)
oailhcsboostertransientsupmode(7)
}
PmoailhcsaprMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Different modes on APR"
SYNTAX INTEGER {
oailhcsaproffmode(0),
oailhcsaprsemiautomode(1),
oailhcsaprautomode(2)
oailhcsaprlossforwardingmode(3)
oailhcsaprrepeatmode(4)
}
PmoailhcsPreampGainAdjMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Different modes on Gain"
SYNTAX INTEGER {
oailhcspreampgainadjmanualmode(0),
oailhcspreampgainadjsemiautomode(1),
oailhcspreampgainadjautomode(2)
}
PmoailhcsBoosterGainAdjMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Different modes on Gain"
SYNTAX INTEGER {
oailhcsboostergainadjmanualmode(0),
oailhcsboostergainadjsemiautomode(1),
oailhcsboostergainadjautomode(2)
}
PmoailhcsPreampCstGainAdjMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Different modes when constant Gain"
SYNTAX INTEGER {
oailhcspreampcstgainadjsemiautomode(1),
oailhcspreampcstgainadjautomode(2)
}
PmoailhcsBoosterCstGainAdjMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Different modes when constant Gain"
SYNTAX INTEGER {
oailhcsboostercstgainadjsemiautomode(1),
oailhcsboostercstgainadjautomode(2)
}
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- REMOTE INVENTORY
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
pmoailhcsRinvReloadInventory OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reload the inventory: This OID triggers an
inventory reload."
::= { pmoailhcsri 2 }
pmoailhcsRinvHwPlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"HW platform description: This OID contains the
description of the Hardware platform."
::= { pmoailhcsri 3 }
pmoailhcsRinvModulePlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Module platform description: This OID contains the
description of the Module."
::= { pmoailhcsri 4 }
pmoailhcsRinvSwPlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SW platform description: This OID contains the
description of the Software platform."
::= { pmoailhcsri 5 }
pmoailhcsRinvGwPlatform OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"GW platform description: This OID contains the
description of the gateware platform."
::= { pmoailhcsri 6 }
pmoailhcsRinvBoosterTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsRinvBoosterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of the Boosters on the selected module"
::= { pmoailhcsri 7 }
pmoailhcsRinvBoosterEntry OBJECT-TYPE
SYNTAX PmoailhcsRinvBoosterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row definition for the Boosters table"
INDEX { pmoailhcsRinvBoosterIndex }
::= { pmoailhcsRinvBoosterTable 1 }
PmoailhcsRinvBoosterEntry::=
SEQUENCE {
pmoailhcsRinvBoosterIndex
Integer32,
pmoailhcsRinvBooster
DisplayString
}
pmoailhcsRinvBoosterIndex OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for Booster table"
::= { pmoailhcsRinvBoosterEntry 1 }
pmoailhcsRinvBooster OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inventory for the Booster: This OID contains the inventory for the Booster"
::= { pmoailhcsRinvBoosterEntry 2 }
pmoailhcsRinvPreAmpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsRinvPreAmpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of the PreAmps on the selected module"
::= { pmoailhcsri 8 }
pmoailhcsRinvPreAmpEntry OBJECT-TYPE
SYNTAX PmoailhcsRinvPreAmpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row definition for the PreAmp table"
INDEX { pmoailhcsRinvPreAmpIndex }
::= { pmoailhcsRinvPreAmpTable 1 }
PmoailhcsRinvPreAmpEntry::=
SEQUENCE {
pmoailhcsRinvPreAmpIndex
Integer32,
pmoailhcsRinvPreAmp
DisplayString
}
pmoailhcsRinvPreAmpIndex OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index for PreAmp table"
::= { pmoailhcsRinvPreAmpEntry 1 }
pmoailhcsRinvPreAmp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inventory for the PreAmp: This OID contains the inventory for the PreAmp"
::= { pmoailhcsRinvPreAmpEntry 2 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- ALARMS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the synthAlm0 article
--- *****************************************************
pmoailhcsAlmsynthAlm0 OBJECT IDENTIFIER ::= { pmoailhcsAlmOtherCrit 0 }
pmoailhcsAlmDefFuseB OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fuse B Fail :This OID indicates
that the fuse of the power input
B is in fail condition <Help>
Status of the Fuse B <Condtype>
DEF_FUSE_B <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm0 16 }
pmoailhcsAlmDefFuseA OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Fuse A Fail :This OID indicates
that the fuse of the power input
A is in fail condition <Help>
Status of the Fuse A <Condtype>
DEF_FUSE_A <Probcause> powerProblem
(36) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm0 15 }
pmoailhcsAlmExtPump1NotLocked OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
External Pump Not Detected :This
OID indicates that the first external
pump is not detected by the amplifier
module <Help> This alarm indicates
if the external pump is detected
by the amplifier module <Condtype>
EXT_PUMP1_NOT_LOCKED <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm0 12 }
pmoailhcsAlmDwEdfaInitNotCompl OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Not Initialized :This OID
indicates that the initialisation
of the IL2 is not completed <Help>
This status indicates if the IL2
has been correctly initialized
<Condtype> DW_EDFA_INIT_NOT_COMPL
<Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm0 11 }
pmoailhcsAlmUpEdfaInitNotCompl OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Not Initialized :This OID
indicates that the initialisation
of the IL1 is not completed <Help>
This status indicates if the IL1
has been correctly initialized
<Condtype> UP_EDFA_INIT_NOT_COMPL
<Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm0 10 }
pmoailhcsAlmModGlobFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Failure :This OID is set
on detection of a failure originating
from the PM <Condtype> MOD_GLOB_FAIL
<Probcause> equipmentMalfunction
(16) <Alarmtype> synthesisAlarm
(12) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm0 9 }
pmoailhcsAlmAprOn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Automatic Power Reduction :This
OID indicates that the APR algorithm
has been operated and the output
of the lasers are shutdown <Help>
The APR algorithm has been completed
<Condtype> APR_ON <Probcause>
other (1) <Alarmtype> other (1)
<Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm0 2 }
pmoailhcsAlmMaintenanceMode OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Maintenance Mode :This OID indicates
that the PM is in maintenance mode
<Help> This status indiates if
the module is currently in maintenance
mode <Condtype> MAINTENANCE_MODE
<Probcause> other (1) <Alarmtype>
other (1) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm0 1 }
--- *****************************************************
--- LEAF for the synthAlm2 article
--- *****************************************************
pmoailhcsAlmsynthAlm2 OBJECT IDENTIFIER ::= { pmoailhcsAlmOtherNurg 2 }
pmoailhcsAlmConfTableLoad OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM Configuration Load :This OID
is at 1 during the loading of
configuration tables in the modules
RAM. <Condtype> CONF_TABLE_LOAD
<Probcause> other (1) <Alarmtype>
other (1) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm2 3 }
pmoailhcsAlmInvUpload OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Inventory Upload :This OID is
at 1 during the uploading of PM
inventory information. <Condtype>
INV_UPLOAD <Probcause> other (1)
<Alarmtype> other (1) <Polarity>
(2)
"
::= { pmoailhcsAlmsynthAlm2 2 }
pmoailhcsAlmConfTableSave OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
PM Configuration Save :This OID
is at 1 during the saving of a
new configuration table in the
module Flash memory. <Condtype>
CONF_TABLE_SAVE <Probcause> other
(1) <Alarmtype> other (1) <Polarity>
(2)
"
::= { pmoailhcsAlmsynthAlm2 1 }
--- *****************************************************
--- LEAF for the synthAlm7 article
--- *****************************************************
pmoailhcsAlmsynthAlm7 OBJECT IDENTIFIER ::= { pmoailhcsAlmLineCrit 7 }
pmoailhcsAlmSupvaFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
: <Condtype> SUPVA_FAIL <Probcause>
equipmentMalfunction (16) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm7 14 }
pmoailhcsAlmLineExtPumpFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 External Pump Fail :This OID
indicates that the external pump
linked to the IL1 is in fail condition
<Help> This alarm indicates
if the external pump linked to
the IL1 is in fail condition <Condtype>
LINE_EXT_PUMP_FAIL <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm7 13 }
pmoailhcsAlmLineFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Line Port Failure :This OID indicates
a failure on the line port <Condtype>
LINE_FAIL <Probcause> callEstablishmentError(5)
<Alarmtype> synthesisAlarm (12)
<Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm7 12 }
pmoailhcsAlmLineTxOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Optical Output Shutdown :This
OID indicates the IL1 optical output
power is on <Help> This status
indicates if the IL1 laser pump
is ON or OFF <Condtype> LINE_TX_OFF
<Probcause> other (1) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm7 5 }
pmoailhcsAlmLineHwFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Line Port HW Failure :This OID
indicates a failure on line port,
most probably caused by a HW issue
<Condtype> LINE_HW_FAIL <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
"
::= { pmoailhcsAlmsynthAlm7 4 }
--- *****************************************************
--- LEAF for the synthAlm8 article
--- *****************************************************
pmoailhcsAlmsynthAlm8 OBJECT IDENTIFIER ::= { pmoailhcsAlmClientCrit 8 }
pmoailhcsAlmSupvbFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
: <Condtype> SUPVB_FAIL <Probcause>
equipmentMalfunction (16) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm8 14 }
pmoailhcsAlmClientExtPumpFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 External Pump Fail :This OID
indicates that the external pump
linked to the IL2 is in fail condition
<Help> This alarm indicates
if the external pump linked to
the IL2 is in fail condition <Condtype>
CLIENT_EXT_PUMP_FAIL <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm8 13 }
pmoailhcsAlmClientFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Client Port Failure :This OID
indicates a failure on the Client
port <Condtype> CLIENT_FAIL <Probcause>
bandwidthReduced(4) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
"
::= { pmoailhcsAlmsynthAlm8 12 }
pmoailhcsAlmClientTxOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Optical Output Shutdown :This
OID indicates the IL2 optical output
power is on <Help> This status
indicates if the IL2 laser pump
transceiver laser is ON or OFF
<Condtype> CLIENT_TX_OFF <Probcause>
other (1) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmsynthAlm8 5 }
pmoailhcsAlmClientHwFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Client Port HW Failure :This OID
indicates a failure on Client port,
most probably caused by a HW issue
<Condtype> CLIENT_HW_FAIL <Probcause>
equipmentMalfunction (16) <Alarmtype>
synthesisAlarm (12) <Polarity>
(2)
"
::= { pmoailhcsAlmsynthAlm8 4 }
--- *****************************************************
--- LEAF for the clientEdfaAlarms1 article
--- *****************************************************
pmoailhcsAlmclientEdfaAlarms1 OBJECT IDENTIFIER ::= { pmoailhcsAlmClientUrg 32 }
pmoailhcsAlmClientBiasHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Bias High Alarm :This OID
indicates that the Bias is higher
than the alarm theshold of the
IL2 Optical Module <Help> This
alarm indicates if the IL2 bias
is too high <Condtype> CLIENT_BIAS_HIGH_ALARM
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms1 8 }
pmoailhcsAlmClientBiasLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Bias Low Alarm :This OID indicates
that the Bias is lower than the
alarm theshold of the IL2 Optical
Module <Help> This alarm indicates
if the IL2 bias is too low <Condtype>
CLIENT_BIAS_LOW_ALARM <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms1 7 }
pmoailhcsAlmClientOutputPwrHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Tx Pwr High Alarm :This OID
indicates that the Transmit Power
is higher than the alarm theshold
of the IL2 Optical Module <Help>
This alarm indicates if the IL2
tx power is too high <Condtype>
CLIENT_OUTPUT_PWR_HIGH_ALARM <Probcause>
transmitterFailure (56) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms1 6 }
pmoailhcsAlmClientOutputPwrLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Tx Pwr Low Alarm :This OID
indicates that the Transmit Power
is lower than the alarm theshold
of the IL2 Optical Module <Help>
This alarm indicates if the IL2
tx power is too low <Condtype>
CLIENT_OUTPUT_PWR_LOW_ALARM <Probcause>
transmitterFailure (56) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms1 5 }
pmoailhcsAlmClientInputPwrHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Rx Pwr High Alarm :This OID
indicates that the Receive Power
is higher than the alarm theshold
of the IL2 Optical Module <Help>
This alarm indicates if the IL2
rx power is too high <Condtype>
CLIENT_INPUT_PWR_HIGH_ALARM <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms1 4 }
pmoailhcsAlmClientInputPwrLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Rx Pwr Low Alarm :This OID
indicates that the Receive Power
is lower than the alarm theshold
of the IL2 Optical Module <Help>
This alarm indicates if the IL2
rx power is too low <Condtype>
CLIENT_INPUT_PWR_LOW_ALARM <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms1 3 }
pmoailhcsAlmClientGainHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Gain High Alarm :This OID
indicates that the Gain is higher
than the alarm threshold of the
IL2 Module <Help> This alarm
indicates if the IL2 gain is too
high <Condtype> CLIENT_GAIN_HIGH_ALARM
<Probcause> performanceDegraded
(35) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms1 2 }
pmoailhcsAlmClientGainLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Gain Low Alarm :This OID indicates
that the Gain is lower than the
alarm theshold of the IL2 Module
<Help> This alarm indicates if
the IL2 gain is too low <Condtype>
CLIENT_GAIN_LOW_ALARM <Probcause>
performanceDegraded (35) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms1 1 }
--- *****************************************************
--- LEAF for the clientEdfaWarnings article
--- *****************************************************
pmoailhcsAlmclientEdfaWarnings OBJECT IDENTIFIER ::= { pmoailhcsAlmClientNurg 33 }
pmoailhcsAlmClientBiasHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Bias High Warning :This OID
indicates that the Bias is higher
than the Warning theshold of the
IL2 Optical Module <Help> This
warning indicates if the IL2 bias
is too high <Condtype> CLIENT_BIAS_HIGH_WARNING
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaWarnings 8 }
pmoailhcsAlmClientBiasLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Bias Low Warning :This OID
indicates that the Bias is lower
than the Warning theshold of the
IL2 Optical Module <Help> This
warning indicates if the IL2 bias
is too low <Condtype> CLIENT_BIAS_LOW_WARNING
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaWarnings 7 }
pmoailhcsAlmClientOutputPwrHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Tx Pwr High Warning :This
OID indicates that the Transmit
Power is higher than the Warning
theshold of the IL2 Optical Module
<Help> This warning indicates
if the IL2 tx power is too high
<Condtype> CLIENT_OUTPUT_PWR_HIGH_WARNING
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaWarnings 6 }
pmoailhcsAlmClientOutputPwrLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Tx Pwr Low Warning :This OID
indicates that the Transmit Power
is lower than the Warning theshold
of the IL2 Optical Module <Help>
This warning indicates if the
IL2 tx power is too low <Condtype>
CLIENT_OUTPUT_PWR_LOW_WARNING <Probcause>
transmitterFailure (56) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaWarnings 5 }
pmoailhcsAlmClientInputPwrHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Rx Pwr High Warning :This
OID indicates that the Receive
Power is higher than the Warning
theshold of the IL2 Optical Module
<Help> This warning indicates
if the IL2 rx power is too high
<Condtype> CLIENT_INPUT_PWR_HIGH_WARNING
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaWarnings 4 }
pmoailhcsAlmClientInputPwrLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Rx Pwr Low Warning :This OID
indicates that the Receive Power
is lower than the Warning theshold
of the IL2 Optical Module <Help>
This warning indicates if the
IL2 rx power is too low <Condtype>
CLIENT_INPUT_PWR_LOW_WARNING <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaWarnings 3 }
pmoailhcsAlmClientGainHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Gain High Warning :This OID
indicates that the Gain is higher
than the Warning threshold of the
IL2 Module <Help> This alarm
indicates if the IL2 gain is too
high <Condtype> CLIENT_GAIN_HIGH_WARNING
<Probcause> performanceDegraded
(35) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaWarnings 2 }
pmoailhcsAlmClientGainLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Gain Low Warning :This OID
indicates that the Gain is lower
than the Warning theshold of the
IL2 Module <Help> This alarm
indicates if the IL2 gain is too
low <Condtype> CLIENT_GAIN_LOW_WARNING
<Probcause> performanceDegraded
(35) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaWarnings 1 }
--- *****************************************************
--- LEAF for the clientEdfaAlarms2 article
--- *****************************************************
pmoailhcsAlmclientEdfaAlarms2 OBJECT IDENTIFIER ::= { pmoailhcsAlmClientCrit 35 }
pmoailhcsAlmClientGainOutOfRange OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Gain Out Of Range :This OID
indicates the target gain of the
IL2 is out of range (18-32dB),
the flatness of the Booster is
not guaranteed.<Help> This alarm
indicates the target gain of the
IL2 is out of range (18-32dB),
the flatness of the Booster is
not guaranteed. <Condtype> CLIENT_GAIN_OUT_OF_RANGE
<Probcause> other(1) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmclientEdfaAlarms2 6 }
pmoailhcsAlmClientExtPumpEdfaLowCurrent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Pump Low Current :This OID
indicates that the EDFA pump current
of IL2 is too low because of the
external pump high power<Help>
This alarm (only active when
there is at least on external
pump) indicates that the EDFA
pump current of the IL2 is too
low because of the external pump
high power. <Condtype> CLIENT_EXT_PUMP_EDFA_LOW_CURRENT
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmclientEdfaAlarms2 5 }
pmoailhcsAlmClientEdfaLos OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Loss Of Signal :This OID indicates
a Loss of Signal on the IL2 Optical
Module <Help> This alarm indicates
if an optical signal is detected
on the IL2 input <Condtype> CLIENT_EDFA_LOS
<Probcause> receiveFailure (41)
<Alarmtype> physicalViolation (9)
<Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms2 4 }
pmoailhcsAlmClientEdfaLaserFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Pump Laser Fail :This OID
indicates a Transmit Laser Fail
on the IL2 Optical Module <Help>
This alarm indicates if the laser
of the IL2 is in fail condition
<Condtype> CLIENT_EDFA_LASER_FAIL
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms2 3 }
pmoailhcsAlmClientEdfaTecFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 TEC Fail :This OID indicates
that the TEC is in fail condition
on the IL2 Optical Module <Help>
This alarm indicates if the TEC
of the IL2 is in fail condition
<Condtype> CLIENT_EDFA_TEC_FAIL
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms2 2 }
pmoailhcsAlmClientEdfaNr OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Optical Module Not Ready :This
OID indicates that the IL2 Optical
Module is not ready <Help> This
status indicates if the IL2 has
been correctly initialized <Condtype>
CLIENT_EDFA_NR <Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmclientEdfaAlarms2 1 }
--- *****************************************************
--- LEAF for the clientMsaAlarms article
--- *****************************************************
pmoailhcsAlmclientMsaAlarms OBJECT IDENTIFIER ::= { pmoailhcsAlmClientCrit 37 }
pmoailhcsAlmClientMsaAttenuation OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 MSA Attenuation Alarm :This
OID indicates the attenuation on
the IL2 Mid Stage access has changed.This
alarm indicates the attenuation
on the IL2 Mid Stage access has
changed. <Condtype> CLIENT_MSA_ATTENUATION
<Probcause> performanceDegraded
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmclientMsaAlarms 2 }
pmoailhcsAlmClientMsaLos OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 MSA Loss Of Signal :This OID
indicates a Loss of Signal is detected
on the Mid Stage Access of the
IL2 EDFAThis alarm indicates a
Loss of Signal is detected on the
Mid Stage Access of the IL2 EDFA
<Condtype> CLIENT_MSA_LOS <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmclientMsaAlarms 1 }
--- *****************************************************
--- LEAF for the lineEdfaAlarms1 article
--- *****************************************************
pmoailhcsAlmlineEdfaAlarms1 OBJECT IDENTIFIER ::= { pmoailhcsAlmLineUrg 40 }
pmoailhcsAlmLineBiasHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Bias High Alarm :This OID
indicates that the Bias is higher
than the alarm theshold of the
IL1 Optical Module <Help> This
alarm indicates if the IL1 bias
is too high <Condtype> LINE_BIAS_HIGH_ALARM
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms1 8 }
pmoailhcsAlmLineBiasLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Bias Low Alarm :This OID indicates
that the Bias is lower than the
alarm theshold of the IL1 Optical
Module <Help> This alarm indicates
if the IL1 bias is too low <Condtype>
LINE_BIAS_LOW_ALARM <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms1 7 }
pmoailhcsAlmLineOutputPwrHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Tx Pwr High Alarm :This OID
indicates that the Transmit Power
is higher than the alarm theshold
of the IL1 Optical Module <Help>
This alarm indicates if the IL1
tx power is too high <Condtype>
LINE_OUTPUT_PWR_HIGH_ALARM <Probcause>
transmitterFailure (56) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms1 6 }
pmoailhcsAlmLineOutputPwrLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Tx Pwr Low Alarm :This OID
indicates that the Transmit Power
is lower than the alarm theshold
of the IL1 Optical Module <Help>
This alarm indicates if the IL1
tx power is too low <Condtype>
LINE_OUTPUT_PWR_LOW_ALARM <Probcause>
transmitterFailure (56) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms1 5 }
pmoailhcsAlmLineInputPwrHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Rx Pwr High Alarm :This OID
indicates that the Receive Power
is higher than the alarm theshold
of the IL1 Optical Module <Help>
This alarm indicates if the IL1
rx power is too high <Condtype>
LINE_INPUT_PWR_HIGH_ALARM <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms1 4 }
pmoailhcsAlmLineInputPwrLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Rx Pwr Low Alarm :This OID
indicates that the Receive Power
is lower than the alarm theshold
of the IL1 Optical Module <Help>
This alarm indicates if the IL1
rx power is too low <Condtype>
LINE_INPUT_PWR_LOW_ALARM <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms1 3 }
pmoailhcsAlmLineGainHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Gain High Alarm :This OID
indicates that the Gain is higher
than the alarm threshold of the
IL1 Module <Help> This alarm
indicates if the IL1 gain is too
high <Condtype> LINE_GAIN_HIGH_ALARM
<Probcause> performanceDegraded
(35) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms1 2 }
pmoailhcsAlmLineGainLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Gain Low Alarm :This OID indicates
that the Gain is lower than the
alarm theshold of the IL1 Module
<Help> This alarm indicates if
the IL1 gain is too low <Condtype>
LINE_GAIN_LOW_ALARM <Probcause>
performanceDegraded (35) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms1 1 }
--- *****************************************************
--- LEAF for the lineEdfaWarnings article
--- *****************************************************
pmoailhcsAlmlineEdfaWarnings OBJECT IDENTIFIER ::= { pmoailhcsAlmLineNurg 41 }
pmoailhcsAlmLineBiasHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Bias High Warning :This OID
indicates that the Bias is higher
than the Warning theshold of the
IL1 Optical Module <Help> This
warning indicates if the IL1 bias
is too high <Condtype> LINE_BIAS_HIGH_WARNING
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaWarnings 8 }
pmoailhcsAlmLineBiasLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Bias Low Warning :This OID
indicates that the Bias is lower
than the Warning theshold of the
IL1 Optical Module <Help> This
warning indicates if the IL1 bias
is too low <Condtype> LINE_BIAS_LOW_WARNING
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaWarnings 7 }
pmoailhcsAlmLineOutputPwrHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Tx Pwr High Warning :This
OID indicates that the Transmit
Power is higher than the Warning
theshold of the IL1 Optical Module
<Help> This warning indicates
if the IL1 tx power is too high
<Condtype> LINE_OUTPUT_PWR_HIGH_WARNING
<Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaWarnings 6 }
pmoailhcsAlmLineOutputPwrLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Tx Pwr Low Warning :This OID
indicates that the Transmit Power
is lower than the Warning theshold
of the IL1 Optical Module <Help>
This warning indicates if the
IL1 tx power is too low <Condtype>
LINE_OUTPUT_PWR_LOW_WARNING <Probcause>
transmitterFailure (56) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaWarnings 5 }
pmoailhcsAlmLineInputPwrHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Rx Pwr High Warning :This
OID indicates that the Receive
Power is higher than the Warning
theshold of the IL1 Optical Module
<Help> This warning indicates
if the IL1 rx power is too high
<Condtype> LINE_INPUT_PWR_HIGH_WARNING
<Probcause> receiveFailure (41)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaWarnings 4 }
pmoailhcsAlmLineInputPwrLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Rx Pwr Low Warning :This OID
indicates that the Receive Power
is lower than the Warning theshold
of the IL1 Optical Module <Help>
This warning indicates if the
IL1 rx power is too low <Condtype>
LINE_INPUT_PWR_LOW_WARNING <Probcause>
receiveFailure (41) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaWarnings 3 }
pmoailhcsAlmLineGainHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Gain High Warning :This OID
indicates that the Gain is higher
than the Warning threshold of the
IL1 Module <Help> This alarm
indicates if the IL1 gain is too
high <Condtype> LINE_GAIN_HIGH_WARNING
<Probcause> performanceDegraded
(35) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaWarnings 2 }
pmoailhcsAlmLineGainLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Gain Low Warning :This OID
indicates that the Gain is lower
than the Warning theshold of the
IL1 Module <Help> This alarm
indicates if the IL1 gain is too
low <Condtype> LINE_GAIN_LOW_WARNING
<Probcause> performanceDegraded
(35) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaWarnings 1 }
--- *****************************************************
--- LEAF for the lineEdfaAlarms2 article
--- *****************************************************
pmoailhcsAlmlineEdfaAlarms2 OBJECT IDENTIFIER ::= { pmoailhcsAlmLineCrit 43 }
pmoailhcsAlmLineGainOutOfRange OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Gain Out Of Range :This OID
indicates the target gain of the
IL2 is out of range (18-32dB),
the flatness of the Booster is
not guaranteed.<Help> This alarm
indicates the target gain of the
IL1 is out of range (18-32dB),
the flatness of the Booster is
not guaranteed. <Condtype> LINE_GAIN_OUT_OF_RANGE
<Probcause> other(1) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineEdfaAlarms2 6 }
pmoailhcsAlmLineExtPumpEdfaLowCurrent OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Pump Low Current :This OID
indicates that the EDFA pump current
of IL1 is too low because of the
external pump high power<Help>
This alarm (only active when
there is at least on external
pump) indicates that the EDFA
pump current of the IL1 is too
low because of the external pump
high power. <Condtype> LINE_EXT_PUMP_EDFA_LOW_CURRENT
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineEdfaAlarms2 5 }
pmoailhcsAlmLineEdfaLos OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Loss Of Signal :This OID indicates
a Loss of Signal on the IL1 Optical
Module <Help> This alarm indicates
if an optical signal is detected
on the IL1 input <Condtype> LINE_EDFA_LOS
<Probcause> receiveFailure (41)
<Alarmtype> physicalViolation (9)
<Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms2 4 }
pmoailhcsAlmLineEdfaLaserFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Pump Laser Fail :This OID
indicates a Transmit Laser Fail
on the IL1 Optical Module <Help>
This alarm indicates if the laser
of the IL1 is in fail condition
<Condtype> LINE_EDFA_LASER_FAIL
<Probcause> pumpFailure (39) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms2 3 }
pmoailhcsAlmLineEdfaTecFail OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 TEC Fail :This OID indicates
that the TEC is in fail condition
on the IL1 Optical Module <Help>
This alarm indicates if the TEC
of the IL1 is in fail condition
<Condtype> LINE_EDFA_TEC_FAIL <Probcause>
pumpFailure (39) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms2 2 }
pmoailhcsAlmLineEdfaNr OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Optical Module Not Ready :This
OID indicates that the IL1 Optical
Module is not ready <Help> This
status indicates if the IL1 has
been correctly initialized <Condtype>
LINE_EDFA_NR <Probcause> equipmentMalfunction
(16) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmlineEdfaAlarms2 1 }
--- *****************************************************
--- LEAF for the lineMsaAlarms article
--- *****************************************************
pmoailhcsAlmlineMsaAlarms OBJECT IDENTIFIER ::= { pmoailhcsAlmLineCrit 45 }
pmoailhcsAlmLineMsaAttenuation OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 MSA Attenuation Alarm :This
OID indicates the attenuation on
the IL1 Mid Stage access has changed.This
alarm indicates the attenuation
on the IL2 Mid Stage access has
changed. <Condtype> LINE_MSA_ATTENUATION
<Probcause> performanceDegraded
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineMsaAlarms 2 }
pmoailhcsAlmLineMsaLos OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 MSA Loss Of Signal :This OID
indicates a Loss of Signal is detected
on the Mid Stage Access of the
IL1 EDFAThis alarm indicates a
Loss of Signal is detected on the
Mid Stage Access of the IL2 EDFA
<Condtype> LINE_MSA_LOS <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineMsaAlarms 1 }
--- *********************************************************
--- TABLE for the pmoailhcsAlmlineOscAlarms articles
--- *********************************************************
pmoailhcsAlmlineOscAlarmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsAlmlineOscAlarmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of pmoailhcsAlmlineOscAlarms
Article
"
::= { pmoailhcsAlmLineCrit 48 }
pmoailhcsAlmlineOscAlarmsEntry OBJECT-TYPE
SYNTAX PmoailhcsAlmlineOscAlarmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the pmoailhcsAlmlineOscAlarms
table
"
INDEX { pmoailhcsAlmlineOscAlarmsIndex }
::= { pmoailhcsAlmlineOscAlarmsTable 1 }
PmoailhcsAlmlineOscAlarmsEntry ::=
SEQUENCE {
pmoailhcsAlmlineOscAlarmsIndex
INTEGER,
pmoailhcsAlmLineAlmPortn
EkiOnOff,
pmoailhcsAlmLineWarningPortn
EkiOnOff,
pmoailhcsAlmLineRemoteTxFailPortn
EkiOnOff,
pmoailhcsAlmLineOofPortn
EkiOnOff,
pmoailhcsAlmLineLofPortn
EkiOnOff,
pmoailhcsAlmLineOosPortn
EkiOnOff,
pmoailhcsAlmLineFecFailPortn
EkiOnOff,
pmoailhcsAlmLineTxFailPortn
EkiOnOff,
pmoailhcsAlmLineTxOffPortn
EkiOnOff,
pmoailhcsAlmLineLosPortn
EkiOnOff
}
pmoailhcsAlmlineOscAlarmsIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the pmoailhcsAlmlineOscAlarms
table
"
::= { pmoailhcsAlmlineOscAlarmsEntry 1 }
pmoailhcsAlmLineAlmPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC DDM Alarm :This alarm indicates
an alarm is present on OSC Tx power,
Rx power or temperature <Help>
This alarm indicates an alarm
is present on OSC Tx power, Rx
power or temperature <Condtype>
LINE_ALM_1 <Probcause> inputOutputDeviceError(24)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineOscAlarmsEntry 11 }
pmoailhcsAlmLineWarningPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC DDM Warning :This OID indicates
a warning is present on OSC Tx
power, Receive power or temperature<Help>
This alarm indicates a warning
is present on OSC Tx power, Rx
power or temperature <Condtype>
LINE_WARNING_1 <Probcause> inputOutputDeviceError(24)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineOscAlarmsEntry 10 }
pmoailhcsAlmLineRemoteTxFailPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Remote Tx Fail : <Condtype>
LINE_REMOTE_TX_FAIL_1 <Probcause>
informationalStatus(1000) <Alarmtype>
other(1) <Polarity> (2)
"
::= { pmoailhcsAlmlineOscAlarmsEntry 9 }
pmoailhcsAlmLineOofPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Out Of Frame : <Condtype>
LINE_OOF_1 <Probcause> inputOutputDeviceError(24)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineOscAlarmsEntry 8 }
pmoailhcsAlmLineLofPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Loss Of Frame : <Condtype>
LINE_LOF_1 <Probcause> inputOutputDeviceError(24)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineOscAlarmsEntry 7 }
pmoailhcsAlmLineOosPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC In Service :This OID indicates
that the OSC is In Service (1)
or Out or Service (2)<Help> This
status indicates that the OSC is
In Service or Out or Service <Condtype>
LINE_OOS_1 <Probcause> informationalStatus(1000)
<Alarmtype> other(1) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscAlarmsEntry 6 }
pmoailhcsAlmLineFecFailPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC FEC Fail :This OID indicates
the FEC is in fail condition on
the OSC input port<Help> This alarms
indicates the FEC is in fail condition
on the OSC input port <Condtype>
LINE_FEC_FAIL_1 <Probcause> inputOutputDeviceError(24)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineOscAlarmsEntry 5 }
pmoailhcsAlmLineTxFailPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Tx Fail :This OID indicates
the OSC Laser is in fail condition<Help>
This alarm indicates the OSC Laser
is in fail condition <Condtype>
LINE_TX_FAIL_1 <Probcause> transmitterFailure
(56) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmlineOscAlarmsEntry 4 }
pmoailhcsAlmLineTxOffPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Optical Output Shutdown :This
OID indicates the optical output
power is shutdown on OSC<Help>
This alarm indicates the optical
output power is shutdown on OSC
<Condtype> LINE_TX_OFF_1 <Probcause>
other(1) <Alarmtype> equipmentAlarm
(5) <Polarity> (2)
"
::= { pmoailhcsAlmlineOscAlarmsEntry 3 }
pmoailhcsAlmLineLosPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Loss Of Signal :This OID indicates
that no signal is present on the
OSC <Help> This alarms indicates
that no signal is present on the
OSC <Condtype> LINE_LOS_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscAlarmsEntry 2 }
--- *********************************************************
--- TABLE for the pmoailhcsAlmlineOscThresholdAlarms articles
--- *********************************************************
pmoailhcsAlmlineOscThresholdAlarmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsAlmlineOscThresholdAlarmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of pmoailhcsAlmlineOscThresholdAlarms
Article
"
::= { pmoailhcsAlmLineCrit 49 }
pmoailhcsAlmlineOscThresholdAlarmsEntry OBJECT-TYPE
SYNTAX PmoailhcsAlmlineOscThresholdAlarmsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the pmoailhcsAlmlineOscThresholdAlarms
table
"
INDEX { pmoailhcsAlmlineOscThresholdAlarmsIndex }
::= { pmoailhcsAlmlineOscThresholdAlarmsTable 1 }
PmoailhcsAlmlineOscThresholdAlarmsEntry ::=
SEQUENCE {
pmoailhcsAlmlineOscThresholdAlarmsIndex
INTEGER,
pmoailhcsAlmLineOscBiasHighAlarmPortn
EkiOnOff,
pmoailhcsAlmLineOscBiasLowAlarmPortn
EkiOnOff,
pmoailhcsAlmLineSpanlossHighAlarmPortn
EkiOnOff,
pmoailhcsAlmLineSpanlossLowAlarmPortn
EkiOnOff,
pmoailhcsAlmLineRxPwrHighAlarmPortn
EkiOnOff,
pmoailhcsAlmLineRxPwrLowAlarmPortn
EkiOnOff,
pmoailhcsAlmLineTxPwrHighAlarmPortn
EkiOnOff,
pmoailhcsAlmLineTxPwrLowAlarmPortn
EkiOnOff
}
pmoailhcsAlmlineOscThresholdAlarmsIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the pmoailhcsAlmlineOscThresholdAlarms
table
"
::= { pmoailhcsAlmlineOscThresholdAlarmsEntry 1 }
pmoailhcsAlmLineOscBiasHighAlarmPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Bias Current High Alarm :This
OID indicates the OSC bias current
is higher than the alarm threshold
<Help> This alarm indicates the
OSC bias current is higher than
the alarm threshold <Condtype>
LINE_OSC_BIAS_HIGH_ALARM_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdAlarmsEntry 9 }
pmoailhcsAlmLineOscBiasLowAlarmPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Bias Current Low Alarm :This
OID indicates the OSC bias current
is lower than the alarm threshold
<Help> This alarm indicates the
OSC bias current is lower than
the alarm threshold <Condtype>
LINE_OSC_BIAS_LOW_ALARM_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdAlarmsEntry 8 }
pmoailhcsAlmLineSpanlossHighAlarmPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Span Loss High Alarm :This
OID indicates the OSC Span Loss
is 3dB higher than the span loss
reference <Help> This alarm indicates
the OSC Span Loss is 3dB higher
than the span loss reference <Condtype>
LINE_SPANLOSS_HIGH_ALARM_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdAlarmsEntry 7 }
pmoailhcsAlmLineSpanlossLowAlarmPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Span Loss Low Alarm :This
OID indicates the OSC Span Loss
is 3dB lower than the span loss
reference<Help> This alarm indicates
the OSC Span Loss is 3dB lower
than the span loss reference <Condtype>
LINE_SPANLOSS_LOW_ALARM_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdAlarmsEntry 6 }
pmoailhcsAlmLineRxPwrHighAlarmPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Rx Power High Alarm :This
OID indicates the Rx Power of
the OSC is higher than the alarm
threshold<Help> This alarm indicates
the Rx Power of the OSC is higher
than the alarm threshold <Condtype>
LINE_RX_PWR_HIGH_ALARM_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdAlarmsEntry 5 }
pmoailhcsAlmLineRxPwrLowAlarmPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Rx Power Low Alarm :This OID
indicates the Rx Power of the OSC
is lower than the alarm threshold<Help>
This alarm indicates the Rx Power
of the OSC is lower than the alarm
threshold <Condtype> LINE_RX_PWR_LOW_ALARM_1
<Probcause> inputOutputDeviceError(24)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineOscThresholdAlarmsEntry 4 }
pmoailhcsAlmLineTxPwrHighAlarmPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Tx Power High Alarm :This
OID indicates the Tx Power of
the OSC is higher than the warning
threshold<Help> This alarm indicates
the Tx Power of the OSC is higher
than the alarm threshold <Condtype>
LINE_TX_PWR_HIGH_ALARM_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdAlarmsEntry 3 }
pmoailhcsAlmLineTxPwrLowAlarmPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Tx Power Low Alarm :This OID
indicates the Tx Power of the OSC
is lower than the warning threshold<Help>
This alarm indicates the Tx Power
of the OSC is lower than the alarm
threshold <Condtype> LINE_TX_PWR_LOW_ALARM_1
<Probcause> inputOutputDeviceError(24)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineOscThresholdAlarmsEntry 2 }
--- *********************************************************
--- TABLE for the pmoailhcsAlmlineOscThresholdsWarnings articles
--- *********************************************************
pmoailhcsAlmlineOscThresholdsWarningsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsAlmlineOscThresholdsWarningsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of pmoailhcsAlmlineOscThresholdsWarnings
Article
"
::= { pmoailhcsAlmLineCrit 50 }
pmoailhcsAlmlineOscThresholdsWarningsEntry OBJECT-TYPE
SYNTAX PmoailhcsAlmlineOscThresholdsWarningsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the pmoailhcsAlmlineOscThresholdsWarnings
table
"
INDEX { pmoailhcsAlmlineOscThresholdsWarningsIndex }
::= { pmoailhcsAlmlineOscThresholdsWarningsTable 1 }
PmoailhcsAlmlineOscThresholdsWarningsEntry ::=
SEQUENCE {
pmoailhcsAlmlineOscThresholdsWarningsIndex
INTEGER,
pmoailhcsAlmLineOscBiasHighWarningPortn
EkiOnOff,
pmoailhcsAlmLineOscBiasLowWarningPortn
EkiOnOff,
pmoailhcsAlmLineSpanlossHighWarningPortn
EkiOnOff,
pmoailhcsAlmLineSpanlossLowWarningPortn
EkiOnOff,
pmoailhcsAlmLineRxPwrHighWarningPortn
EkiOnOff,
pmoailhcsAlmLineRxPwrLowWarningPortn
EkiOnOff,
pmoailhcsAlmLineTxPwrHighWarningPortn
EkiOnOff,
pmoailhcsAlmLineTxPwrLowWarningPortn
EkiOnOff
}
pmoailhcsAlmlineOscThresholdsWarningsIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the pmoailhcsAlmlineOscThresholdsWarnings
table
"
::= { pmoailhcsAlmlineOscThresholdsWarningsEntry 1 }
pmoailhcsAlmLineOscBiasHighWarningPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Bias Current High Warning
:This OID indicates the OSC bias
current is higher than the warning
threshold <Help> This alarm indicates
the OSC bias current is higher
than the warning threshold <Condtype>
LINE_OSC_BIAS_HIGH_WARNING_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdsWarningsEntry 9 }
pmoailhcsAlmLineOscBiasLowWarningPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Bias Current Low Warning :This
OID indicates the OSC bias current
is lower than the warning threshold
<Help> This alarm indicates the
OSC bias current is lower than
the warning threshold <Condtype>
LINE_OSC_BIAS_LOW_WARNING_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdsWarningsEntry 8 }
pmoailhcsAlmLineSpanlossHighWarningPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Span Loss High Warning :This
OID indicates the OSC Span Loss
is 1dB higher than the span loss
reference <Help> This alarm indicates
the OSC Span Loss is 1dB higher
than the span loss reference <Condtype>
LINE_SPANLOSS_HIGH_WARNING_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdsWarningsEntry 7 }
pmoailhcsAlmLineSpanlossLowWarningPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Span Loss Low Warning :This
OID indicates the OSC Span Loss
is 1dB lower than the span loss
reference<Help> This alarm indicates
the OSC Span Loss is 1dB lower
than the span loss reference <Condtype>
LINE_SPANLOSS_LOW_WARNING_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdsWarningsEntry 6 }
pmoailhcsAlmLineRxPwrHighWarningPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Rx Power High Warning :This
OID indicates the Rx Power of the
OSC is higher than the warning
threshold<Help> This alarm indicates
the Rx Power of the OSC is higher
than the warning threshold <Condtype>
LINE_RX_PWR_HIGH_WARNING_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdsWarningsEntry 5 }
pmoailhcsAlmLineRxPwrLowWarningPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Rx Power Low Warning :This
OID indicates the Rx Power of the
OSC is lower than the warning threshold<Help>
This alarm indicates the Tx Power
of the OSC is lower than the warning
threshold <Condtype> LINE_RX_PWR_LOW_WARNING_1
<Probcause> inputOutputDeviceError(24)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineOscThresholdsWarningsEntry 4 }
pmoailhcsAlmLineTxPwrHighWarningPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Tx Power High Warning :This
OID indicates the Tx Power of the
OSC is higher than the warning
threshold<Help> This alarm indicates
the Tx Power of the OSB is higher
than the warning threshold <Condtype>
LINE_TX_PWR_HIGH_WARNING_1 <Probcause>
inputOutputDeviceError(24) <Alarmtype>
equipmentAlarm (5) <Polarity>
(2)
"
::= { pmoailhcsAlmlineOscThresholdsWarningsEntry 3 }
pmoailhcsAlmLineTxPwrLowWarningPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Tx Power Low Warning :This
OID indicates the Tx Power of the
OSC is lower than the warning threshold<Help>
This alarm indicates the Tx Power
of the OSC is lower than the warning
threshold <Condtype> LINE_TX_PWR_LOW_WARNING_1
<Probcause> inputOutputDeviceError(24)
<Alarmtype> equipmentAlarm (5)
<Polarity> (2)
"
::= { pmoailhcsAlmlineOscThresholdsWarningsEntry 2 }
--- *****************************************************
--- LEAF for the foaAlarms article
--- *****************************************************
pmoailhcsAlmfoaAlarms OBJECT IDENTIFIER ::= { pmoailhcsAlmOtherUrg 74 }
pmoailhcsAlmTempHighAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Temperature High Alarm :This OID
indicates that the PM temperature
is higher than the alarm threshold
<Condtype> TEMP_HIGH_ALARM <Probcause>
temperatureUnacceptable (51) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmfoaAlarms 8 }
pmoailhcsAlmTermpLowAlarm OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Temperature Low Alarm :This OID
indicates that the PM temperature
if lower than the alarm threshold
<Condtype> TERMP_LOW_ALARM <Probcause>
temperatureUnacceptable (51) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmfoaAlarms 7 }
--- *****************************************************
--- LEAF for the foaWarnings article
--- *****************************************************
pmoailhcsAlmfoaWarnings OBJECT IDENTIFIER ::= { pmoailhcsAlmOtherNurg 75 }
pmoailhcsAlmTempHighWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Temperature High Warning :This
OID indicates that the PM temperature
if higher than the Warning threshold
<Condtype> TEMP_HIGH_WARNING <Probcause>
temperatureUnacceptable (51) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmfoaWarnings 8 }
pmoailhcsAlmTermpLowWarning OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Temperature Low Warning :This
OID indicates that the PM temperature
if lower than the Warning threshold
<Condtype> TERMP_LOW_WARNING <Probcause>
temperatureUnacceptable (51) <Alarmtype>
equipmentAlarm (5) <Polarity> (2)
"
::= { pmoailhcsAlmfoaWarnings 7 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- CONTROLS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the synth0 article
--- *****************************************************
pmoailhcsCtrlsynth0 OBJECT IDENTIFIER ::= { pmoailhcsCtrlOther 0 }
pmoailhcsCtrlConfClear OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Clear Configuration Tables :This
bit clears the configuration tables
from configuration in the flash.
<Help> This control restores
the default configuration of the
module
"
::= { pmoailhcsCtrlsynth0 13 }
pmoailhcsCtrlConfFlash OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Write Configuration Tables :This
bit saves the current configuration
of the module as configuration
in the flash. <Help> This control
saves the customer configuration
on the module
"
::= { pmoailhcsCtrlsynth0 9 }
pmoailhcsCtrlConfLoad OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Load Configuration Tables :When
set this enables loading from flash
configuration1 into the module.
"
::= { pmoailhcsCtrlsynth0 1 }
--- *****************************************************
--- LEAF for the swMgnt article
--- *****************************************************
pmoailhcsCtrlswMgnt OBJECT IDENTIFIER ::= { pmoailhcsCtrlOther 5 }
pmoailhcsCtrlWarmReset OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
PM Warm Reset :This OID, when
set, causes a warm reset of the
Software. This reset is not traffic
affecting, and the configuration
of the Sofwtare remains unchanged.
<Help> This control initiates
a warm reset of the module.
"
::= { pmoailhcsCtrlswMgnt 3 }
pmoailhcsCtrlColdReset OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
PM Cold Reset :This OID, when
set, causes a cold reset of the
Software. This reset is traffic
affecting, and the configuration
of Software is reloaded on start-up.
<Help> This control initiates
a cold reset of the module.
"
::= { pmoailhcsCtrlswMgnt 2 }
--- *****************************************************
--- LEAF for the clientOscInputSpanLoss article
--- *****************************************************
pmoailhcsCtrlclientOscInputSpanLoss OBJECT IDENTIFIER ::= { pmoailhcsCtrlClient 33 }
pmoailhcsCtrlClientSpanLoss OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Store IL2 Input Span Loss :This
OID stores the current input span
Loss as a reference to monitor
the span loss variation <Help>
This parameter stores the current
input span Loss as a reference
to monitor the span loss variation
"
::= { pmoailhcsCtrlclientOscInputSpanLoss 1 }
--- *****************************************************
--- LEAF for the clientGainCstMonitorValue article
--- *****************************************************
pmoailhcsCtrlclientGainCstMonitorValue OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
IL2 Fiber Aging Period :This OID
sets the value of the monitoring
period to detect a fiber aging.
(Unit = s) This value sets the
monitoring period to detect a
fiber aging.
"
::= { pmoailhcsCtrlClient 34 }
--- *****************************************************
--- LEAF for the clientGainSettingValue article
--- *****************************************************
pmoailhcsCtrlclientGainSettingValue OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
IL2 Gain Target :This OID sets
the value of the nominal gain of
the IL2lifier Module (active only
in constant output power mode)
(AV=(Gain/0,005) + 32768) (Unit
= dB)<Help> This control sets the
value of the nominal gain of the
Pre- Amplifier Module (active only
in constant output power mode)
"
::= { pmoailhcsCtrlClient 36 }
--- *****************************************************
--- LEAF for the clientGainProcessing article
--- *****************************************************
pmoailhcsCtrlclientGainProcessing OBJECT IDENTIFIER ::= { pmoailhcsCtrlClient 37 }
pmoailhcsCtrlClientGainProc OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
IL2 Gain Adjustment :This OID
initiates the automatic nominal
gain adjustment on the IL2lifier
Module<Help> This control initiates
the automatic nominal gain adjustment
on the IL2lifier Module
"
::= { pmoailhcsCtrlclientGainProcessing 1 }
--- *****************************************************
--- LEAF for the clientGainCstFiberAgingMarginValue article
--- *****************************************************
pmoailhcsCtrlclientGainCstFiberAgingMarginValue OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
IL2 Aging Threshold :This OID
sets the threshold to consider
the power drop as a fiber aging.
(active only in constant gain mode)
(AV=(Gain/0,005) + 32768) (Unit
= dB) <Help> This value defines
the threshold to consider the power
drop as a fiber aging.
"
::= { pmoailhcsCtrlClient 38 }
--- *****************************************************
--- LEAF for the clientMsaAttenuationValue article
--- *****************************************************
pmoailhcsCtrlclientMsaAttenuationValue OBJECT IDENTIFIER ::= { pmoailhcsCtrlClient 40 }
pmoailhcsCtrlClientAttenuation OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Store IL2 MSA Attenuation :This
OID stores the current attenuation
applied on the Mid Stage Access
of the IL2 (used for monitoring
the MSA attenuation variation)<Help>
This parameter stores the current
attenuation applied on the Mid
Stage Access of the IL2 (used
for monitoring the MSA attenuation
variation)
"
::= { pmoailhcsCtrlclientMsaAttenuationValue 1 }
--- *****************************************************
--- LEAF for the lineOscInputSpanLoss article
--- *****************************************************
pmoailhcsCtrllineOscInputSpanLoss OBJECT IDENTIFIER ::= { pmoailhcsCtrlLine 49 }
pmoailhcsCtrlLineSpanLoss OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Store IL1 Input Span Loss :This
OID stores the current input span
Loss as a reference to monitor
the span loss variation<Help>
This parameter stores the current
input span Loss as a reference
to monitor the span loss variation
"
::= { pmoailhcsCtrllineOscInputSpanLoss 1 }
--- *****************************************************
--- LEAF for the lineGainCstMonitorValue article
--- *****************************************************
pmoailhcsCtrllineGainCstMonitorValue OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
IL1 Fiber Aging Period :This OID
sets the value of the monitoring
period to detect a fiber aging.
(Unit = s) This value sets the
monitoring period to detect a
fiber aging.
"
::= { pmoailhcsCtrlLine 50 }
--- *****************************************************
--- LEAF for the lineGainSettingValue article
--- *****************************************************
pmoailhcsCtrllineGainSettingValue OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
IL1 Gain Target :This OID sets
the value of the nominal gain of
the IL1 Module (active only in
constant output power mode) (AV=(Gain/0,005)
+ 32768) (Unit = dB) <Help> This
control sets the value of the nominal
gain of the IL1 Module (active
only in constant output power
mode)
"
::= { pmoailhcsCtrlLine 52 }
--- *****************************************************
--- LEAF for the lineGainProcessing article
--- *****************************************************
pmoailhcsCtrllineGainProcessing OBJECT IDENTIFIER ::= { pmoailhcsCtrlLine 53 }
pmoailhcsCtrlLineGainProc OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
IL1 Gain Adjustment :This OID
initiates the automatic nominal
gain adjustment on the IL1 Module<Help>
This control initiates the automatic
nominal gain adjustment on the
IL1 Module
"
::= { pmoailhcsCtrllineGainProcessing 1 }
--- *****************************************************
--- LEAF for the lineGainCstFiberAgingMarginValue article
--- *****************************************************
pmoailhcsCtrllineGainCstFiberAgingMarginValue OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
IL1 Aging Threshold :This OID
sets the threshold to consider
the power drop as a fiber aging.
(active only in constant gain mode)
(AV=(Gain/0,005) + 32768) (Unit
= dB) <Help> This value defines
the threshold to consider the power
drop as a fiber aging.
"
::= { pmoailhcsCtrlLine 54 }
--- *****************************************************
--- LEAF for the lineMsaAttenuationValue article
--- *****************************************************
pmoailhcsCtrllineMsaAttenuationValue OBJECT IDENTIFIER ::= { pmoailhcsCtrlLine 56 }
pmoailhcsCtrlLineAttenuation OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Store IL1 MSA Attenuation :This
OID stores the current attenuation
applied on the Mid Stage Access
of the IL1 (used for monitoring
the MSA attenuation variation)<Help>
This parameter stores the current
attenuation applied on the Mid
Stage Access of the IL1 (used
for monitoring the MSA attenuation
variation)
"
::= { pmoailhcsCtrllineMsaAttenuationValue 1 }
--- *****************************************************
--- LEAF for the ledTest article
--- *****************************************************
pmoailhcsCtrlledTest OBJECT IDENTIFIER ::= { pmoailhcsCtrlOther 73 }
pmoailhcsCtrlLedOff OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Leds Off :This OID switches off
all the Leds as a test feature.
<Help> This control initiates
a test leds turning all the LEDs
to OFF
"
::= { pmoailhcsCtrlledTest 3 }
pmoailhcsCtrlRedLed OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Red Leds Test :This OID switches
on all the red Leds as a test feature.
<Help> This control initiates
a test leds turning all the LEDs
to red
"
::= { pmoailhcsCtrlledTest 2 }
pmoailhcsCtrlGreenLed OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Green Leds Test :This OID switches
on all the green Leds as a test
feature. <Help> This control
initiates a test leds turning
all the LEDs to green
"
::= { pmoailhcsCtrlledTest 1 }
--- *****************************************************
--- LEAF for the maintMode article
--- *****************************************************
pmoailhcsCtrlmaintMode OBJECT IDENTIFIER ::= { pmoailhcsCtrlOther 75 }
pmoailhcsCtrlMaintenance OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
PM Maintenance Mode :This OID
sets the PM in maintenance mode
<Help> This control enables the
maintenance mode of the module
"
::= { pmoailhcsCtrlmaintMode 1 }
--- *****************************************************
--- LEAF for the aprRestart article
--- *****************************************************
pmoailhcsCtrlaprRestart OBJECT IDENTIFIER ::= { pmoailhcsCtrlOther 76 }
pmoailhcsCtrlAprManualRestart OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
APR Manual Restart :This OID initiates
the Restart mechanism to retrieve
from the APR state.<Help> This
control initiates the Restart
mechanism to retrieve from the
APR state.
"
::= { pmoailhcsCtrlaprRestart 1 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- COUNTERS
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *********************************************************
--- TABLE for the pmoailhcsCntlineOscErr articles
--- *********************************************************
pmoailhcsCntlineOscErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsCntlineOscErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of pmoailhcsCntlineOscErr
Article
"
::= { pmoailhcsCntLine 16 }
pmoailhcsCntlineOscErrEntry OBJECT-TYPE
SYNTAX PmoailhcsCntlineOscErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the pmoailhcsCntlineOscErr
table
"
INDEX { pmoailhcsCntlineOscErrIndex }
::= { pmoailhcsCntlineOscErrTable 1 }
PmoailhcsCntlineOscErrEntry ::=
SEQUENCE {
pmoailhcsCntlineOscErrIndex
INTEGER,
pmoailhcsCntlineOscErrValuePortn
Counter32,
pmoailhcsCntlineOscErrErrorPortn
EkiOnOff,
pmoailhcsCntlineOscErrOverloadPortn
EkiOnOff
}
pmoailhcsCntlineOscErrIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the pmoailhcsCntlineOscErr
table
"
::= { pmoailhcsCntlineOscErrEntry 1 }
pmoailhcsCntlineOscErrValuePortn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC FEC Counter :This OID indicates
the number of errors corrected
by the FEC of the OSC<Help> This
measure indicates the number of
errors corrected by the FEC of
the OSC
"
::= { pmoailhcsCntlineOscErrEntry 2 }
pmoailhcsCntlineOscErrErrorPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
B1 Counter Error :This OID when
set indicates the B1 counter value
is invalid on Port
"
::= { pmoailhcsCntlineOscErrEntry 3 }
pmoailhcsCntlineOscErrOverloadPortn OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
B1 Counter Overload :This OID
when set indicates a B1 error
counter overload on Port
"
::= { pmoailhcsCntlineOscErrEntry 4 }
pmoailhcsCntCountersReset OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Counters Reset:This OID resets and restarts all the counters"
::= { pmoailhcscounters 259 }
pmoailhcsCntCountersStop OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Counters stop:This OID stops all the counters"
::= { pmoailhcscounters 260 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- MEASURES
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the clientEdfaBiasMeas article
--- *****************************************************
pmoailhcsMesrclientEdfaBiasMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Pump Laser Current :This OID
gives the pump laser current of
the IL2 Optical Module (Current
=AV/100) (Unit = mA) <Help> This
measure gives the bias of the IL2
pump laser
"
::= { pmoailhcsMesrClient 32 }
--- *****************************************************
--- LEAF for the clientEdfaTxpwrMeas article
--- *****************************************************
pmoailhcsMesrclientEdfaTxpwrMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Tx Power :This OID gives the
transmit power value of the IL2
Optical Module (Power =(AV-32768)*0,005)
(Unit = dBm) <Help> This measure
gives the Tx optical power of the
IL2
"
::= { pmoailhcsMesrClient 33 }
--- *****************************************************
--- LEAF for the clientEdfaRxpwrMeas article
--- *****************************************************
pmoailhcsMesrclientEdfaRxpwrMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Rx Power :This OID gives the
receive power value of the IL2
Optical Module (Power =(AV-32768)*0,005)
(Unit = dBm) <Help> This measure
gives the Rx optical power of the
IL2
"
::= { pmoailhcsMesrClient 34 }
--- *****************************************************
--- LEAF for the clientEdfaGainMeas article
--- *****************************************************
pmoailhcsMesrclientEdfaGainMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Gain Target :This OID gives
the gain value of the IL2 Module
(Gain =(AV-32768)*0,005) (Unit
= dB) <Help> This information
gives the target gain of the amplifier
for optimal performance
"
::= { pmoailhcsMesrClient 35 }
--- *****************************************************
--- LEAF for the clientOscSpanLoss article
--- *****************************************************
pmoailhcsMesrclientOscSpanLoss OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Input Span Loss :This OID
indicates the attenuation of the
span connected to the IL2 input
(Power =(AV-32768)*0,005) (Unit
= dB) <Help> This measure indicates
the attenuation of the span connected
to the IL2 input
"
::= { pmoailhcsMesrClient 36 }
--- *****************************************************
--- LEAF for the clientOscSpanLossRef article
--- *****************************************************
pmoailhcsMesrclientOscSpanLossRef OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Input Span Loss Ref :This
OID indicates the referenced attenuation
of the span connected to the IL2
input (Used to monitor the variation
of the span loss) (Power =(AV-32768)*0,005)
(Unit = dB) <Help> This measure
indicates the referenced attenuation
of the span connected to the IL2
input (Used to monitor the variation
of the span loss)
"
::= { pmoailhcsMesrClient 37 }
--- *****************************************************
--- LEAF for the clientCorrectedGain article
--- *****************************************************
pmoailhcsMesrclientCorrectedGain OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 Gain :This OID gives the gain
value of the IL2 Module corrected
by the ASE compensation mechanism
(Gain =(AV-32768)*0,005) (Unit
= dB) <Help> This measure gives
the effective gain of the amplifier
"
::= { pmoailhcsMesrClient 38 }
--- *****************************************************
--- LEAF for the clientMsaInputPower article
--- *****************************************************
pmoailhcsMesrclientMsaInputPower OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 MSA Rx Power :This OID indicates
the input power of the Mid Stage
Access of the IL2 (Power =(AV-32768)*0,005)
(Unit = dBm) <Help> This measure
indicates the input power of the
Mid Stage Access of the IL2
"
::= { pmoailhcsMesrClient 39 }
--- *****************************************************
--- LEAF for the clientMsaOutputPower article
--- *****************************************************
pmoailhcsMesrclientMsaOutputPower OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 MSA Tx Power :This OID indicates
the output power of the Mid Stage
Access of the IL2 (Power =(AV-32768)*0,005)
(Unit = dBm) <Help> This measure
indicates the output power of the
Mid Stage Access of the IL2
"
::= { pmoailhcsMesrClient 40 }
--- *****************************************************
--- LEAF for the clientMsaAttenuation article
--- *****************************************************
pmoailhcsMesrclientMsaAttenuation OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 MSA Attenuation :This OID
indicates the attenuation applied
on the Mid Stage Access of the
IL2 (Attenuation =(AV-32768)*0,005)
(Unit = dB) <Help> This measure
indicates the attenuation applied
on the Mid Stage Access of the
IL2
"
::= { pmoailhcsMesrClient 41 }
--- *****************************************************
--- LEAF for the clientMsaAttenuationRef article
--- *****************************************************
pmoailhcsMesrclientMsaAttenuationRef OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL2 MSA Attenuation Ref :This
OID indicates the reference attenuation
stored for the Mid Stage Access
of the In-Line1 (Used to monitor
the variation of this attenuation)
(Attenuation =(AV-32768)*0,005)
(Unit = dB) <Help> This measure
indicates the reference attenuation
stored for the Mid Stage Access
of the IL2 (Used to monitor the
variation of this attenuation)
"
::= { pmoailhcsMesrClient 42 }
--- *****************************************************
--- LEAF for the lineEdfaBiasMeas article
--- *****************************************************
pmoailhcsMesrlineEdfaBiasMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Pump Laser Current :This OID
gives the pump laser current of
the IL1 Optical Module (Current
=AV/100) (Unit = mA) <Help> This
measure gives the bias of the IL1
pump laser
"
::= { pmoailhcsMesrLine 48 }
--- *****************************************************
--- LEAF for the lineEdfaTxpwrMeas article
--- *****************************************************
pmoailhcsMesrlineEdfaTxpwrMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Tx Power :This OID gives the
transmit power value of the IL1
Optical Module (Power =(AV-32768)*0,005)
(Unit = dBm) <Help> This measure
gives the Tx optical power of the
IL1
"
::= { pmoailhcsMesrLine 49 }
--- *****************************************************
--- LEAF for the lineEdfaRxpwrMeas article
--- *****************************************************
pmoailhcsMesrlineEdfaRxpwrMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Rx Power :This OID gives the
receive power value of the IL1
Optical Module (Power =(AV-32768)*0,005)
(Unit = dBm) <Help> This measure
gives the Rx optical power of the
IL1
"
::= { pmoailhcsMesrLine 50 }
--- *****************************************************
--- LEAF for the lineEdfaGainMeas article
--- *****************************************************
pmoailhcsMesrlineEdfaGainMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Gain Target :This OID gives
the gain value of the IL1 Module
(Gain =(AV-32768)*0,005) (Unit
= dB) <Help> This information
gives the target gain of the amplifier
for optimal performance
"
::= { pmoailhcsMesrLine 51 }
--- *****************************************************
--- LEAF for the lineOscSpanLoss article
--- *****************************************************
pmoailhcsMesrlineOscSpanLoss OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Input Span Loss :This OID
indicates the attenuation of the
span connected to the IL1 input
(Power =(AV-32768)*0,005) (Unit
= dB) <Help> This measure indicates
the attenuation of the span connected
to the IL1 input
"
::= { pmoailhcsMesrLine 52 }
--- *****************************************************
--- LEAF for the lineOscSpanLossRef article
--- *****************************************************
pmoailhcsMesrlineOscSpanLossRef OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Input Span Loss Ref :This
OID indicates the referenced attenuation
of the span connected to the IL1
input (Used to monitor the variation
of the span loss) (Power =(AV-32768)*0,005)
(Unit = dB) <Help> This measure
indicates the referenced attenuation
of the span connected to the IL1
input (Used to monitor the variation
of the span loss)
"
::= { pmoailhcsMesrLine 53 }
--- *****************************************************
--- LEAF for the lineCorrectedGain article
--- *****************************************************
pmoailhcsMesrlineCorrectedGain OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 Gain :This OID gives the gain
value of the IL1 Module corrected
by the ASE compensation mechanism
(Gain =(AV-32768)*0,005) (Unit
= dB) <Help> This measure gives
the effective gain of the amplifier
"
::= { pmoailhcsMesrLine 54 }
--- *****************************************************
--- LEAF for the lineMsaInputPower article
--- *****************************************************
pmoailhcsMesrlineMsaInputPower OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 MSA Rx Power :This OID indicates
the input power of the Mid Stage
Access of the IL1 (Power =(AV-32768)*0,005)
(Unit = dBm) <Help> This measure
indicates the input power of the
Mid Stage Access of the IL1
"
::= { pmoailhcsMesrLine 55 }
--- *****************************************************
--- LEAF for the lineMsaOutputPower article
--- *****************************************************
pmoailhcsMesrlineMsaOutputPower OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 MSA Tx Power :This OID indicates
the output power of the Mid Stage
Access of the IL1 (Power =(AV-32768)*0,005)
(Unit = dBm) <Help> This measure
indicates the output power of the
Mid Stage Access of the IL1
"
::= { pmoailhcsMesrLine 56 }
--- *****************************************************
--- LEAF for the lineMsaAttenuation article
--- *****************************************************
pmoailhcsMesrlineMsaAttenuation OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 MSA Attenuation :This OID
indicates the attenuation applied
on the Mid Stage Access of the
IL1 (Attenuation =(AV-32768)*0,005)
(Unit = dB) <Help> This measure
indicates the attenuation applied
on the Mid Stage Access of the
IL1
"
::= { pmoailhcsMesrLine 57 }
--- *****************************************************
--- LEAF for the lineMsaAttenuationRef article
--- *****************************************************
pmoailhcsMesrlineMsaAttenuationRef OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
IL1 MSA Attenuation Ref :This
OID indicates the reference attenuation
stored for the Mid Stage Access
of the IL1 (Used to monitor the
variation of this attenuation)
(Attenuation =(AV-32768)*0,005)
(Unit = dB) <Help> This measure
indicates the reference attenuation
stored for the Mid Stage Access
of the IL1 (Used to monitor the
variation of this attenuation)
"
::= { pmoailhcsMesrLine 58 }
--- *********************************************************
--- TABLE for the pmoailhcsMesrlineOscTxPower articles
--- *********************************************************
pmoailhcsMesrlineOscTxPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsMesrlineOscTxPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of pmoailhcsMesrlineOscTxPower
Article
"
::= { pmoailhcsMesrLine 64 }
pmoailhcsMesrlineOscTxPowerEntry OBJECT-TYPE
SYNTAX PmoailhcsMesrlineOscTxPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the pmoailhcsMesrlineOscTxPower
table
"
INDEX { pmoailhcsMesrlineOscTxPowerIndex }
::= { pmoailhcsMesrlineOscTxPowerTable 1 }
PmoailhcsMesrlineOscTxPowerEntry ::=
SEQUENCE {
pmoailhcsMesrlineOscTxPowerIndex
INTEGER,
pmoailhcsMesrlineOscTxPowerPortn
INTEGER
}
pmoailhcsMesrlineOscTxPowerIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the pmoailhcsMesrlineOscTxPower
table
"
::= { pmoailhcsMesrlineOscTxPowerEntry 1 }
pmoailhcsMesrlineOscTxPowerPortn OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Tx Power :This OID indicates
the output power of the OSC (Power
=(AV-32768)*0,005) (Unit = dBm)
<Help> This measure indicates
the output power of the OSC
"
::= { pmoailhcsMesrlineOscTxPowerEntry 2 }
--- *********************************************************
--- TABLE for the pmoailhcsMesrlineOscRxPower articles
--- *********************************************************
pmoailhcsMesrlineOscRxPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsMesrlineOscRxPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of pmoailhcsMesrlineOscRxPower
Article
"
::= { pmoailhcsMesrLine 65 }
pmoailhcsMesrlineOscRxPowerEntry OBJECT-TYPE
SYNTAX PmoailhcsMesrlineOscRxPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the pmoailhcsMesrlineOscRxPower
table
"
INDEX { pmoailhcsMesrlineOscRxPowerIndex }
::= { pmoailhcsMesrlineOscRxPowerTable 1 }
PmoailhcsMesrlineOscRxPowerEntry ::=
SEQUENCE {
pmoailhcsMesrlineOscRxPowerIndex
INTEGER,
pmoailhcsMesrlineOscRxPowerPortn
INTEGER
}
pmoailhcsMesrlineOscRxPowerIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the pmoailhcsMesrlineOscRxPower
table
"
::= { pmoailhcsMesrlineOscRxPowerEntry 1 }
pmoailhcsMesrlineOscRxPowerPortn OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
OSC Rx Power :This OID indicates
the input power of the OSC (Power
=(AV-32768)*0,005) (Unit = dBm)
<Help> This measure indicates
the input power of the OSC
"
::= { pmoailhcsMesrlineOscRxPowerEntry 2 }
--- *****************************************************
--- LEAF for the tempMeas article
--- *****************************************************
pmoailhcsMesrtempMeas OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Module Temperature :This OID gives
the temperature of the PM (Temperature
=AV/256) (Unit = C) <Help> This
measure gives the temperature of
the module
"
::= { pmoailhcsMesrOther 80 }
--- *****************************************************
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- CONFIG
--- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
--- *****************************************************
--- *****************************************************
--- LEAF for the table Group noValue
--- *****************************************************
pmoailhcsCfgNoValue OBJECT IDENTIFIER ::= { pmoailhcsConfig 1 }
--- *****************************************************
--- LEAF for the table 2111
--- *****************************************************
pmoailhcstableclientStartup OBJECT IDENTIFIER ::= { pmoailhcsCfgNoValue 1 }
pmoailhcsCfgclientEdfaLaserCtrl OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Client Laser
:This OID configures the default
initialisation settings on the
client laser.
"
::= { pmoailhcstableclientStartup 2 }
pmoailhcsCfgclientEdfaLaserMode OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Client mode
:This OID configures the default
mode on the client amplifier.
"
::= { pmoailhcstableclientStartup 3 }
pmoailhcsCfgclientGainValue OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Client Gain
:This OID configures the default
gain on the client amplifier.
"
::= { pmoailhcstableclientStartup 4 }
pmoailhcsCfgclientTiltValue OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Client Tilt
:This OID configures the default
tilt on the client amplifier.
"
::= { pmoailhcstableclientStartup 5 }
pmoailhcsCfgclientMsaLoss OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Client MSA
:This OID configures the default
MSA value on the client amplifier.
"
::= { pmoailhcstableclientStartup 6 }
pmoailhcsCfgclientOutputPowerValue OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Client Output
power :This OID configures the
default Output power value on
the client amplifier.
"
::= { pmoailhcstableclientStartup 7 }
pmoailhcsCfgclientAseCompensation OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Client ASE
:This OID configures the default
ASE compensation value on the client
amplifier.
"
::= { pmoailhcstableclientStartup 8 }
--- *****************************************************
--- LEAF for the table Group lineStartUp
--- *****************************************************
pmoailhcsCfgLineStartUp OBJECT IDENTIFIER ::= { pmoailhcsConfig 2 }
--- *****************************************************
--- LEAF for the table 2191
--- *****************************************************
pmoailhcstablelineStartup OBJECT IDENTIFIER ::= { pmoailhcsCfgLineStartUp 1 }
pmoailhcsCfglineEdfaLaserCtrl OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Line Laser
:This OID configures the default
initialisation settings on the
line laser.
"
::= { pmoailhcstablelineStartup 2 }
pmoailhcsCfglineEdfaLaserMode OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Line mode
:This OID configures the default
mode on the line amplifier.
"
::= { pmoailhcstablelineStartup 3 }
pmoailhcsCfglineGainValue OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Line Gain
:This OID configures the default
gain on the line amplifier.
"
::= { pmoailhcstablelineStartup 4 }
pmoailhcsCfglineTiltValue OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Line Tilt
:This OID configures the default
tilt on the line amplifier.
"
::= { pmoailhcstablelineStartup 5 }
pmoailhcsCfglineMsaLoss OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Line MSA :This
OID configures the default MSA
value on the line amplifier.
"
::= { pmoailhcstablelineStartup 6 }
pmoailhcsCfglineOutputPowerValue OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Line Output
power :This OID configures the
default Output power value on
the line amplifier.
"
::= { pmoailhcstablelineStartup 7 }
pmoailhcsCfglineAseCompensation OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on Line ASE :This
OID configures the default ASE
compensation value on the line
amplifier.
"
::= { pmoailhcstablelineStartup 8 }
pmoailhcsCfgaprMode OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default setting on module :This
OID configures the default mode
on the APR
"
::= { pmoailhcstablelineStartup 11 }
--- *****************************************************
--- LEAF for the table Group clientSupvStartUp
--- *****************************************************
pmoailhcsCfgClientSupvStartUp OBJECT IDENTIFIER ::= { pmoailhcsConfig 3 }
--- *****************************************************
--- LEAF for the table 2192
--- *****************************************************
pmoailhcsCfgLineStartupTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsCfgLineStartupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of Article
"
::= { pmoailhcsCfgClientSupvStartUp 1 }
pmoailhcsCfgLineStartupEntry OBJECT-TYPE
SYNTAX PmoailhcsCfgLineStartupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the clientSupvStartUp
table
"
INDEX { pmoailhcsCfgLineStartupIndex }
::= { pmoailhcsCfgLineStartupTable 1 }
PmoailhcsCfgLineStartupEntry ::=
SEQUENCE {
pmoailhcsCfgLineStartupIndex
INTEGER,
pmoailhcsCfgLineOscLaserCtrlPortn
Unsigned32,
pmoailhcsCfgLineOscOosPortn
Unsigned32,
pmoailhcsCfgLineOscSpanLengthPortn
Unsigned32,
pmoailhcsCfgLineOscCorrectionFactorPortn
Unsigned32
}
pmoailhcsCfgLineStartupIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the lineStartup
table
"
::= { pmoailhcsCfgLineStartupEntry 1 }
pmoailhcsCfgLineOscLaserCtrlPortn OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on OSC Laser
:This OID configures the default
initialisation settings on the
OSC
"
::= { pmoailhcsCfgLineStartupEntry 3 }
pmoailhcsCfgLineOscOosPortn OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on OSC mode :This
OID configures the default mode
on the OSC
"
::= { pmoailhcsCfgLineStartupEntry 4 }
pmoailhcsCfgLineOscSpanLengthPortn OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on OSC span length
:This OID defines the length of
the span connected on the OSC port
"
::= { pmoailhcsCfgLineStartupEntry 5 }
pmoailhcsCfgLineOscCorrectionFactorPortn OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default Settings on OSC attenuation
corrector factor :This OID defines
the correction factor to apply
on the span attenuation measure
on the OSC Channel (1510) before
configuring the EDFA gain.
"
::= { pmoailhcsCfgLineStartupEntry 6 }
--- *****************************************************
--- LEAF for the table Group labels
--- *****************************************************
pmoailhcsCfgLabels OBJECT IDENTIFIER ::= { pmoailhcsConfig 4 }
--- *****************************************************
--- LEAF for the table NO_VALUE
--- *****************************************************
pmoailhcsCfgLabelclientTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsCfgLabelclientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of Article
"
::= { pmoailhcsCfgLabels 1 }
pmoailhcsCfgLabelclientEntry OBJECT-TYPE
SYNTAX PmoailhcsCfgLabelclientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the labels
table
"
INDEX { pmoailhcsCfgLabelclientIndex }
::= { pmoailhcsCfgLabelclientTable 1 }
PmoailhcsCfgLabelclientEntry ::=
SEQUENCE {
pmoailhcsCfgLabelclientIndex
INTEGER,
pmoailhcsCfgLabelclientPortn
DisplayString
}
pmoailhcsCfgLabelclientIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the labelclient
table
"
::= { pmoailhcsCfgLabelclientEntry 1 }
pmoailhcsCfgLabelclientPortn OBJECT-TYPE
SYNTAX DisplayString( SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default settings on the label
of the Ports :These registers
configures the default initialisation
settings of the labels of the ports.
"
::= { pmoailhcsCfgLabelclientEntry 3 }
--- *****************************************************
--- LEAF for the table NO_VALUE
--- *****************************************************
pmoailhcsCfgLabellineTable OBJECT-TYPE
SYNTAX SEQUENCE OF PmoailhcsCfgLabellineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
List of Article
"
::= { pmoailhcsCfgLabels 2 }
pmoailhcsCfgLabellineEntry OBJECT-TYPE
SYNTAX PmoailhcsCfgLabellineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Row definition for the labels
table
"
INDEX { pmoailhcsCfgLabellineIndex }
::= { pmoailhcsCfgLabellineTable 1 }
PmoailhcsCfgLabellineEntry ::=
SEQUENCE {
pmoailhcsCfgLabellineIndex
INTEGER,
pmoailhcsCfgLabellinePortn
DisplayString
}
pmoailhcsCfgLabellineIndex OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Index definition for the labelline
table
"
::= { pmoailhcsCfgLabellineEntry 1 }
pmoailhcsCfgLabellinePortn OBJECT-TYPE
SYNTAX DisplayString( SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Default settings on the label
of the lines :These registers
configures the default initialisation
settings of the labels of the lines.
"
::= { pmoailhcsCfgLabellineEntry 3 }
pmoailhcsCfgWriteConfiguration OBJECT-TYPE
SYNTAX EkiOnOff
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write configuration to module:This OID
writes the complete configuration to the module"
::= { pmoailhcsConfig 257 }
--- *****************************************************
--- TRAP OBJECTS
--- *****************************************************
pmoailhcstrapBoardNumber OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last module which generates a trap"
::= { pmoailhcstraps 4 }
--- *****************************************************
--- GLOBAL TRAPS
--- *****************************************************
pmoailhcsLineTrapCritGoesOn NOTIFICATION-TYPE
OBJECTS {pmoailhcsAlmLineFail, pmoailhcsAlmLineHwFail, pmoailhcstrapBoardNumber}
STATUS current
--&FILTNAME "PMOAILHCS Line Fail ON"
--&ACTIONS { log, critical }
--&MATCH { pmoailhcsAlmLineFail "on", pmoailhcsAlmLineHwFail "*", pmoailhcstrapBoardNumber "$3"}
--&MESG "Critical Alarm appears on IL2 input or IL1 Output of PMOAILHCS in slot $3 ($A)"
--&FILTNAME "PMOAILHCS Line HW Fail ON (Hidden)"
--&ACTIONS { info }
--&MATCH { pmoailhcsAlmLineFail "*", pmoailhcsAlmLineHwFail "on", pmoailhcstrapBoardNumber "$3"}
--&MESG "Critical Alarm appears on IL2 input or IL1 Output of PMOAILHCS in slot $3 ($A)"
DESCRIPTION "Critical Line default is activated"
::= { pmoailhcstraps 34 }
pmoailhcsLineTrapCritGoesOff NOTIFICATION-TYPE
OBJECTS {pmoailhcsAlmLineFail, pmoailhcsAlmLineHwFail, pmoailhcstrapBoardNumber}
STATUS current
--&FILTNAME "PMOAILHCS Line Fail OFF"
--&ACTIONS { log, normal }
--&CLEARS {"PMOAILHCS Line Fail ON"}
--&MATCH { pmoailhcsAlmLineFail "on", pmoailhcsAlmLineHwFail "*", pmoailhcstrapBoardNumber "$3"}
--&MESG "Critical Alarm disappears on IL2 input or IL1 Output of PMOAILHCS in slot $3 ($A)"
--&FILTNAME "PMOAILHCS Line HW Fail OFF (Hidden)"
--&ACTIONS { info }
--&MATCH { pmoailhcsAlmLineFail "*", pmoailhcsAlmLineHwFail "on", pmoailhcstrapBoardNumber "$3"}
--&MESG "Critical Alarm disappears on IL2 input or IL1 Output of PMOAILHCS in slot $3 ($A)"
DESCRIPTION "Critical Line default disappeared"
::= { pmoailhcstraps 35 }
--- *****************************************************
--- PORTS TRAPS
--- *****************************************************
pmoailhcsClientTrapCritGoesOn NOTIFICATION-TYPE
OBJECTS {pmoailhcsAlmClientFail, pmoailhcsAlmClientHwFail, pmoailhcstrapBoardNumber}
STATUS current
--&FILTNAME "PMOAILHCS Client Fail ON"
--&ACTIONS { log, critical }
--&MATCH { pmoailhcsAlmClientFail "on", pmoailhcsAlmClientHwFail "*", pmoailhcstrapBoardNumber "$3"}
--&MESG "Critical Alarm appears on IL1 input or IL2 Output of PMOAILHCS in slot $3 ($A)"
--&FILTNAME "PMOAILHCS Client HW Fail ON (Hidden)"
--&ACTIONS { info }
--&MATCH { pmoailhcsAlmClientFail "*", pmoailhcsAlmClientHwFail "on", pmoailhcstrapBoardNumber "$3"}
--&MESG "Critical Alarm appears on IL1 input or IL2 Output of PMOAILHCS in slot $3 ($A)"
DESCRIPTION "Critical client default is activated"
::= { pmoailhcstraps 44 }
pmoailhcsClientTrapCritGoesOff NOTIFICATION-TYPE
OBJECTS {pmoailhcsAlmClientFail, pmoailhcsAlmClientHwFail, pmoailhcstrapBoardNumber}
STATUS current
--&FILTNAME "PMOAILHCS Client Fail OFF"
--&ACTIONS { log, normal }
--&CLEARS {"PMOAILHCS Client Fail ON"}
--&MATCH { pmoailhcsAlmClientFail "on", pmoailhcsAlmClientHwFail "*", pmoailhcstrapBoardNumber "$3"}
--&MESG "Critical Alarm disappears on IL1 input or IL2 Output of PMOAILHCS in slot $3 ($A)"
--&FILTNAME "PMOAILHCS Client HW Fail OFF (Hidden)"
--&ACTIONS { info }
--&MATCH { pmoailhcsAlmClientFail "*", pmoailhcsAlmClientHwFail "on", pmoailhcstrapBoardNumber "$3"}
--&MESG "Critical Alarm disappears on IL1 input or IL2 Output of PMOAILHCS in slot $3 ($A)"
DESCRIPTION "Critical client default disappeared"
::= { pmoailhcstraps 45 }
--- *****************************************************
--- HW TRAPS
--- *****************************************************
pmoailhcsPowerTrapUrgentGoesOn NOTIFICATION-TYPE
OBJECTS {pmoailhcsAlmDefFuseB, pmoailhcsAlmDefFuseA , pmoailhcstrapBoardNumber}
STATUS current
--&FILTNAME "PMOAILHCS Fuse A Fail ON"
--&ACTIONS { log, major }
--&MATCH { pmoailhcsAlmDefFuseB "*", pmoailhcsAlmDefFuseA "on", pmoailhcstrapBoardNumber "$3"}
--&MESG "Power Input A Fail on PMOAILHCS in Slot $3 ($A)"
--&FILTNAME "PMOAILHCS Fuse B Fail ON"
--&ACTIONS { log, major }
--&MATCH { pmoailhcsAlmDefFuseB "on", pmoailhcsAlmDefFuseA "*", pmoailhcstrapBoardNumber "$3"}
--&MESG "Power Input B Fail on PMOAILHCS in Slot $3 ($A)"
DESCRIPTION "Urgent power supply default is activated"
::= { pmoailhcstraps 50 }
pmoailhcsPowerTrapUrgentGoesOff NOTIFICATION-TYPE
OBJECTS {pmoailhcsAlmDefFuseB, pmoailhcsAlmDefFuseA , pmoailhcstrapBoardNumber}
STATUS current
--&FILTNAME "PMOAILHCS Fuse A&B Fail OFF"
--&ACTIONS { log, normal}
--&CLEARS { "PMOAILHCS Fuse A Fail ON", "PMOAILHCS Fuse B Fail ON" }
--&MATCH { pmoailhcsAlmDefFuseB "on", pmoailhcsAlmDefFuseA "on", pmoailhcstrapBoardNumber "$3"}
--&MESG "Power Inputs A and B Present on PMOAILHCS in Slot $3 ($A)"
DESCRIPTION "Urgent power supply default disappeared"
::= { pmoailhcstraps 51 }
END
View Git Blame Copy Permalink