1786 lines
61 KiB
Plaintext
1786 lines
61 KiB
Plaintext
-- SWL2MGMT MIB Ver 0.02 2002/07/30
|
|
--
|
|
--
|
|
--
|
|
--
|
|
-- SWL2MGMT MIB Ver 0.01 2000/07/03
|
|
--
|
|
-- revised history by yedda
|
|
-- Add swL2QOSMgmt 2003/5/26
|
|
-- Add swL2TrunkAlgorithm 2003/5/26
|
|
-- Remove swDevInfoFrontPanelLedStatus to dlkEquipment 2003/5/28 06:25¤U¤È
|
|
-- Add swL2PortCtrlMulticastfilter 2006/1/11 by max~
|
|
-- Add swL2TrunkLACPPortTable 2006/1/11 by max~
|
|
-- Modified swL2PortSecurityMode 2003/6/20
|
|
-- Add swL2TrunkType 2006/1/11 by Max~
|
|
-- Add swL2DevCtrlAsymVlanState 2003/6/20
|
|
--
|
|
-- Remove swL2StackPortList 2004/3/30
|
|
|
|
DGS3024-L2MGMT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress , TimeTicks , Integer32,
|
|
MODULE-IDENTITY , OBJECT-TYPE FROM SNMPv2-SMI
|
|
DisplayString,RowStatus FROM SNMPv2-TC
|
|
AgentNotifyLevel FROM DLINK-ID-REC-MIB
|
|
dgs-3024Mgmt FROM DGS3024PRIMGMT-MIB;
|
|
|
|
swL2MgmtMIB MODULE-IDENTITY
|
|
LAST-UPDATED "0007150000Z"
|
|
ORGANIZATION "VEGS, Inc."
|
|
CONTACT-INFO
|
|
" "
|
|
DESCRIPTION
|
|
"The Structure of Layer 2 Network Management Information"
|
|
::= { dgs-3024Mgmt 2}
|
|
|
|
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
|
|
-- in the
|
|
-- "canonical"
|
|
-- order, copy from RFC1493
|
|
|
|
VlanId ::= INTEGER (1..4094)
|
|
PortList ::= OCTET STRING(SIZE (0..127))
|
|
|
|
swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
|
|
swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
|
|
swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
|
|
-- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
|
|
swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
|
|
swL2MirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
|
|
swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
|
|
swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 }
|
|
-- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
|
|
swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 }
|
|
-- ********************************************************************
|
|
|
|
swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 }
|
|
|
|
|
|
swDevInfoTotalNumOfPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports within this switch. This value is the sum
|
|
of the ports within this switch."
|
|
::= { swL2DevInfo 1 }
|
|
|
|
swDevInfoNumOfPortInUse OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ports in this switch connected to the segment or
|
|
the end stations."
|
|
::= { swL2DevInfo 2 }
|
|
|
|
|
|
-- ***************************************************
|
|
swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 }
|
|
|
|
swL2DevCtrlStpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can be enabled or disabled spanning tree algorithm
|
|
during runtime of the system."
|
|
::= { swL2DevCtrl 1 }
|
|
|
|
swL2DevCtrlIGMPSnooping OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates layer 2 Internet Group Management
|
|
Protocol (IGMP) capture function is enabled or disabled."
|
|
::= { swL2DevCtrl 2 }
|
|
|
|
swL2DevCtrlRmonState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can be enabled or disabled RMON."
|
|
::= { swL2DevCtrl 3 }
|
|
|
|
swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"As the object is set to active, all the statistic counters will
|
|
be cleared. If set to normal, do nothing."
|
|
::= { swL2DevCtrl 4 }
|
|
|
|
swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE
|
|
SYNTAX VlanId
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ;
|
|
The default value is DEFAULT_VLAN_ID of system ."
|
|
::= { swL2DevCtrl 5 }
|
|
|
|
swL2MACNotifyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can enabled or disabled MAC Notification."
|
|
::= { swL2DevCtrl 6 }
|
|
|
|
swL2MACNotifyHistorySize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..500)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the history size of variation MAC in address table.
|
|
The default value is 1 ."
|
|
::= { swL2DevCtrl 7 }
|
|
|
|
swL2MACNotifyInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the time interval in second for trigger the MAC notify message. "
|
|
::= { swL2DevCtrl 8 }
|
|
|
|
swL2PortCtrlMulticastfilter OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
-- other(0),
|
|
-- forward-all-groups(1),
|
|
forward-unregistered-groups(2),
|
|
filter-unregistered-groups(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object decide the multicast packets filtering mode on all port . "
|
|
::= { swL2DevCtrl 9 }
|
|
|
|
-- swL2StackPortList OBJECT-TYPE
|
|
-- SYNTAX PortList
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates wihich ports want to configure as stack port."
|
|
-- ::= { swL2DevCtrl 9 }
|
|
|
|
-- swL2DevCtrlAsymVlanState OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- disabled(2),
|
|
-- enabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object can enabl or disabl asymmetric vlan
|
|
-- during runtime of the system."
|
|
-- ::= { swL2DevCtrl 13 }
|
|
|
|
-- ***************************************************
|
|
swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 3 }
|
|
|
|
swL2DevAlarmNewRoot OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the device has become the new root of the Spanning Tree,
|
|
this object decide whether to send a new root trap."
|
|
::= { swL2DevAlarm 1 }
|
|
|
|
swL2DevAlarmTopologyChange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determine to send a trap or not when the switch
|
|
topology was changed. If the object is enabled(3),
|
|
the topologyChange trap is sent by the device when any of its
|
|
configured ports transitions from the Learning state to the
|
|
Forwarding state, or from the Forwarding state to the Blocking
|
|
state. For the same port tranition, the device doesn't send the
|
|
trap if this object value is disabled or other."
|
|
::= { swL2DevAlarm 2 }
|
|
|
|
swL2DevAlarmLinkChange OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determine to send a trap or not when the link
|
|
was changed. If the object is enabled(3), the Link Change
|
|
trap is sent by the device when any of its ports link change.
|
|
The device doesn't send the trap if this object value is
|
|
disabled or other."
|
|
::= { swL2DevAlarm 3 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 }
|
|
-- ********************************************************************
|
|
|
|
swL2PortInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains information about every port."
|
|
::= { swL2PortMgmt 1 }
|
|
|
|
swL2PortInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information for each port of the device."
|
|
INDEX { swL2PortInfoPortIndex }
|
|
::= { swL2PortInfoTable 1 }
|
|
|
|
SwL2PortInfoEntry ::=
|
|
SEQUENCE {
|
|
swL2PortInfoPortIndex
|
|
INTEGER,
|
|
swL2PortInfoUnitID
|
|
INTEGER,
|
|
swL2PortInfoType
|
|
INTEGER,
|
|
swL2PortInfoLinkStatus
|
|
INTEGER,
|
|
swL2PortInfoNwayStatus
|
|
INTEGER
|
|
-- swL2PortInfoModuleType
|
|
-- INTEGER
|
|
}
|
|
|
|
swL2PortInfoPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortInfoEntry 1 }
|
|
|
|
swL2PortInfoUnitID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ID of the unit in the system"
|
|
::= { swL2PortInfoEntry 2 }
|
|
|
|
swL2PortInfoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
portType-100Base-TX(1),
|
|
portType-100Base-FX(2),
|
|
portType-100Base-FL(3),
|
|
portType-1000Base-TX(4),
|
|
portType-1000Base-SX(5),
|
|
portType-1000Base-LX(6),
|
|
portType-1000Base-SX-GBIC(7),
|
|
portType-1000Base-LX-GBIC(8),
|
|
portType-1000Base-TX-GBIC(9),
|
|
portType-1000Base-1394(10),
|
|
none(11)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the connector type of this port."
|
|
::= { swL2PortInfoEntry 3 }
|
|
|
|
swL2PortInfoLinkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
link-pass(2),
|
|
link-fail(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port link status."
|
|
::= { swL2PortInfoEntry 4 }
|
|
|
|
swL2PortInfoNwayStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(0),
|
|
empty(1),
|
|
link-down(2),
|
|
half-10Mbps(3),
|
|
full-10Mbps(4),
|
|
half-100Mbps(5),
|
|
full-100Mbps(6),
|
|
half-1Gigabps(7),
|
|
full-1Gigabps(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port speed and duplex mode."
|
|
::= { swL2PortInfoEntry 5 }
|
|
|
|
-- swL2PortInfoModuleType OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- none(0),
|
|
-- moduleType-COMBO(1),
|
|
-- moduleType-1394(2),
|
|
-- moduleType-1000T(3),
|
|
-- moduleType-MGBIC(4),
|
|
-- moduleType-1P-SC-SX(5),
|
|
-- moduleType-2P-SC-SX(6),
|
|
-- moduleType-1P-SC-LX(7),
|
|
-- moduleType-2P-SC-LX(8),
|
|
-- moduleType-1P-TX(9),
|
|
-- moduleType-2P-TX(10),
|
|
-- moduleType-1P-MTRJ-SX(11),
|
|
-- moduleType-2P-MTRJ-SX(12),
|
|
-- moduleType-1P-MTRJ-LX(13),
|
|
-- moduleType-2P-MTRJ-LX(14),
|
|
-- moduleType-1P-GBIC(15),
|
|
-- moduleType-2P-GBIC(16),
|
|
-- moduleType-1P-GBIC-1P-TX(17),
|
|
-- moduleType-1P-GBIC-1P-STACK(18),
|
|
-- moduleType-2P-STACK(19),
|
|
-- moduleType-2P-100FX(20),
|
|
-- moduleType-1P-100FX(21),
|
|
-- moduleType-2P-100FX-NEW(22),
|
|
-- moduleType-1P-100FL(23),
|
|
-- moduleType-2P-100FL(24),
|
|
-- moduleType-2P-100TX(25),
|
|
-- moduleType-BaseModule-24PORT(26)
|
|
-- }
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the module type of this port."
|
|
-- ::= { swL2PortInfoEntry 6 }
|
|
|
|
|
|
-- *******************************************************
|
|
|
|
swL2PortCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2PortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains control information about every port."
|
|
::= { swL2PortMgmt 2 }
|
|
|
|
swL2PortCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2PortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of control information for each port of the device."
|
|
INDEX { swL2PortCtrlPortIndex }
|
|
::= { swL2PortCtrlTable 1 }
|
|
|
|
SwL2PortCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2PortCtrlPortIndex
|
|
INTEGER,
|
|
swL2PortCtrlUnitIndex
|
|
INTEGER,
|
|
swL2PortCtrlAdminState
|
|
INTEGER,
|
|
swL2PortCtrlNwayState
|
|
INTEGER,
|
|
swL2PortCtrlFlowCtrlState
|
|
INTEGER,
|
|
-- swL2PortCtrlLockState
|
|
-- INTEGER,
|
|
swL2PortCtrlMACNotifyState
|
|
INTEGER,
|
|
-- swL2PortCtrlMulticastfilter
|
|
-- INTEGER
|
|
swL2PortCtrlDescription
|
|
DisplayString
|
|
}
|
|
|
|
swL2PortCtrlPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the module's port number.(1..Max port
|
|
number in the module)"
|
|
::= { swL2PortCtrlEntry 1 }
|
|
|
|
swL2PortCtrlUnitIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates ID of the unit in the device"
|
|
::= { swL2PortCtrlEntry 2 }
|
|
|
|
swL2PortCtrlAdminState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object decide the port enabled or disabled."
|
|
::= { swL2PortCtrlEntry 3 }
|
|
|
|
swL2PortCtrlNwayState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
nway-enabled(2),
|
|
nway-disabled-10Mbps-Half(3),
|
|
nway-disabled-10Mbps-Full(4),
|
|
nway-disabled-100Mbps-Half(5),
|
|
nway-disabled-100Mbps-Full(6),
|
|
-- nway-disabled-1Gigabps-Half(7), VEGS-2244: Not Supported
|
|
-- nway-disabled-1Gigabps-Full(8)
|
|
nway-disabled-1Gigabps-Full-master(9),
|
|
nway-disabled-1Gigabps-Full-slave(10)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Chose the port speed, duplex mode, and N-Way function mode."
|
|
::= { swL2PortCtrlEntry 4 }
|
|
|
|
swL2PortCtrlFlowCtrlState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flow control mechanism is different between full duplex
|
|
mode and half duplex mode. For half duplex mode, the jamming
|
|
signal is asserted. For full duplex mode, IEEE 802.3x flow
|
|
control function sends PAUSE frames and receives PAUSE frames."
|
|
::= { swL2PortCtrlEntry 5 }
|
|
|
|
-- swL2PortCtrlLockState OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- disabled(2),
|
|
-- enabled(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object decide the port is locked or not."
|
|
-- ::= { swL2PortCtrlEntry 6 }
|
|
|
|
swL2PortCtrlMACNotifyState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object set each poet MAC notification state."
|
|
::= { swL2PortCtrlEntry 7 }
|
|
|
|
-- swL2PortCtrlMulticastfilter OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(0),
|
|
-- forward-all-groups(1),
|
|
-- forward-unregistered-groups(2),
|
|
-- filter-unregistered-groups(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object decide the multicast packets filtering mode on this port . "
|
|
-- ::= { swL2PortCtrlEntry 8 }
|
|
swL2PortCtrlDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object decide the description on this port."
|
|
::= { swL2PortCtrlEntry 9 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 }
|
|
-- ********************************************************************
|
|
|
|
swL2QOSBandwidthControlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2QOSBandwidthControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { swL2QOSMgmt 1 }
|
|
|
|
swL2QOSBandwidthControlEntry OBJECT-TYPE
|
|
SYNTAX SwL2QOSBandwidthControlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2QOSBandwidthControlTable."
|
|
INDEX { swL2QOSBandwidthPortIndex }
|
|
::= { swL2QOSBandwidthControlTable 1 }
|
|
|
|
SwL2QOSBandwidthControlEntry ::=
|
|
SEQUENCE {
|
|
swL2QOSBandwidthPortIndex
|
|
INTEGER,
|
|
swL2QOSBandwidthRxRate
|
|
INTEGER
|
|
--swL2QOSBandwidthTxRate
|
|
-- INTEGER
|
|
}
|
|
|
|
swL2QOSBandwidthPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..650)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port ."
|
|
::= { swL2QOSBandwidthControlEntry 1 }
|
|
|
|
swL2QOSBandwidthRxRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no-limit(1),
|
|
rx-64K(2),
|
|
rx-128K(3),
|
|
rx-256K(4),
|
|
rx-512K(5),
|
|
rx-1M(6),
|
|
rx-2M(7),
|
|
rx-4M(8),
|
|
rx-8M(9),
|
|
rx-16M(10),
|
|
rx-32M(11),
|
|
rx-64M(12),
|
|
rx-128M(13),
|
|
rx-256M(14),
|
|
rx-512M(15)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates RX Rate(Mbit/sec) of the specifed port. Value 1 means no limit."
|
|
::= { swL2QOSBandwidthControlEntry 2 }
|
|
|
|
-- swL2QOSBandwidthTxRate OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..1000)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates TX Rate(Mbit/sec) of the specifed port. Value 0 means no limit."
|
|
-- ::= { swL2QOSBandwidthControlEntry 3 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2QOSSchedulingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2QOSSchedulingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { swL2QOSMgmt 2 }
|
|
|
|
swL2QOSSchedulingEntry OBJECT-TYPE
|
|
SYNTAX SwL2QOSSchedulingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2QOSSchedulingTable."
|
|
INDEX { swL2QOSSchedulingClassIndex }
|
|
::= { swL2QOSSchedulingTable 1 }
|
|
|
|
SwL2QOSSchedulingEntry ::=
|
|
SEQUENCE {
|
|
swL2QOSSchedulingClassIndex
|
|
INTEGER,
|
|
swL2QOSSchedulingMaxPkts
|
|
INTEGER
|
|
}
|
|
|
|
swL2QOSSchedulingClassIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the hardware queue number."
|
|
::= { swL2QOSSchedulingEntry 1 }
|
|
|
|
swL2QOSSchedulingMaxPkts OBJECT-TYPE
|
|
SYNTAX INTEGER(0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the max packet of QOS scheduling."
|
|
::= { swL2QOSSchedulingEntry 2 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2QOS8021pUserPriorityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2QOS8021pUserPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { swL2QOSMgmt 3 }
|
|
|
|
swL2QOS8021pUserPriorityEntry OBJECT-TYPE
|
|
SYNTAX SwL2QOS8021pUserPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2QOS8021pUserPriorityTable."
|
|
INDEX { swL2QOS8021pUserPriorityIndex }
|
|
::= { swL2QOS8021pUserPriorityTable 1 }
|
|
|
|
SwL2QOS8021pUserPriorityEntry ::=
|
|
SEQUENCE {
|
|
swL2QOS8021pUserPriorityIndex
|
|
INTEGER,
|
|
swL2QOS8021pUserPriorityClass
|
|
INTEGER
|
|
}
|
|
|
|
swL2QOS8021pUserPriorityIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 802.1p user priority ."
|
|
::= { swL2QOS8021pUserPriorityEntry 1 }
|
|
|
|
swL2QOS8021pUserPriorityClass OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of the switch's hardware priority queue. The switch has four hardware
|
|
priority queues available. They are numbered between 0 (the lowest priority)
|
|
and 3 (the highest priority)."
|
|
::= { swL2QOS8021pUserPriorityEntry 2 }
|
|
|
|
-- *******************************************************
|
|
|
|
swL2QOS8021pDefaultPriorityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2QOS8021pDefaultPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { swL2QOSMgmt 4 }
|
|
|
|
swL2QOS8021pDefaultPriorityEntry OBJECT-TYPE
|
|
SYNTAX SwL2QOS8021pDefaultPriorityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information contained in swL2QOS8021pDefaultPriorityTable."
|
|
INDEX { swL2QOS8021pDefaultPriorityIndex }
|
|
::= { swL2QOS8021pDefaultPriorityTable 1 }
|
|
|
|
SwL2QOS8021pDefaultPriorityEntry ::=
|
|
SEQUENCE {
|
|
swL2QOS8021pDefaultPriorityIndex
|
|
INTEGER,
|
|
swL2QOS8021pDefaultPriority
|
|
INTEGER
|
|
}
|
|
|
|
swL2QOS8021pDefaultPriorityIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..650)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the port number ."
|
|
::= { swL2QOS8021pDefaultPriorityEntry 1 }
|
|
|
|
swL2QOS8021pDefaultPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority value to assign to untagged packets received by the
|
|
switch ports on the switch.."
|
|
::= { swL2QOS8021pDefaultPriorityEntry 2 }
|
|
|
|
swL2QOSSchedulingMechanismCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
strict(1),
|
|
roundrobin(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object can control QOS scheduling Mechanism."
|
|
::= { swL2QOSMgmt 5 }
|
|
|
|
-- ********************************************************************
|
|
-- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 }
|
|
-- ********************************************************************
|
|
|
|
-- swL2PortSecurityControlTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "port security feature which controls the address leaning capability and the
|
|
-- traffic forwarding decision. Each port can have this function enabled or disabled.
|
|
-- When it is enabled and a number is given said N, which allows N addresses to be
|
|
-- learned at this port, the first N learned addresses are locked at this port as
|
|
-- static entry. When the learned addresses number reach N, any coming packet with
|
|
-- not learned source addresses are discarded (e.g. dropped) and no more new addresses
|
|
-- can be learned at this port."
|
|
-- ::= { swL2PortSecurityMgmt 1 }
|
|
|
|
-- swL2PortSecurityControlEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2PortSecurityControlEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of information contained in swL2PortSecurityControlTable."
|
|
-- INDEX { swL2PortSecurityPortIndex }
|
|
-- ::= { swL2PortSecurityControlTable 1 }
|
|
|
|
-- SwL2PortSecurityControlEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2PortSecurityPortIndex
|
|
-- INTEGER,
|
|
-- swL2PortSecurityMaxLernAddr
|
|
-- INTEGER,
|
|
-- swL2PortSecurityMode
|
|
-- INTEGER,
|
|
-- swL2PortSecurityAdmState
|
|
-- INTEGER
|
|
-- }
|
|
|
|
-- swL2PortSecurityPortIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..650)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the secured port to lock address learning."
|
|
-- ::= { swL2PortSecurityControlEntry 1 }
|
|
|
|
-- swL2PortSecurityMaxLernAddr OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..10)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates allowable number of addresses to be learned at this port."
|
|
-- ::= { swL2PortSecurityControlEntry 2 }
|
|
|
|
-- swL2PortSecurityMode OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- permanent(2),
|
|
-- deleteOnTimeout(3),
|
|
-- deleteOnReset(4)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates the mode of locking address.
|
|
-- In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer
|
|
-- expire. In this mode, when the locked address is aged
|
|
-- out, the number of address can be learned has to be
|
|
-- increased by one.
|
|
-- In deleteOnReset(4) mode - never age out the locked addresses unless restart
|
|
-- the system to prevent from port movement or intrusion."
|
|
-- ::= { swL2PortSecurityControlEntry 3 }
|
|
|
|
-- swL2PortSecurityAdmState OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- other(1),
|
|
-- enable(2),
|
|
-- disable(3)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates administration state of locking address."
|
|
-- ::= { swL2PortSecurityControlEntry 4 }
|
|
--
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 }
|
|
-- ********************************************************************
|
|
|
|
swL2TrunkMaxSupportedEntries OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of entries in the trunk configuration table
|
|
(swL2TrunkCtrlTable)."
|
|
::= { swL2TrunkMgmt 1 }
|
|
|
|
swL2TrunkCurrentNumEntries OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current actived number of entries in the trunk configuration
|
|
table."
|
|
::= { swL2TrunkMgmt 2 }
|
|
|
|
swL2TrunkCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrunkCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifys which ports group a set of ports(up to 8)
|
|
into a single logical link."
|
|
::= { swL2TrunkMgmt 3 }
|
|
|
|
swL2TrunkCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrunkCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information specifies which ports group a set of
|
|
ports(up to 8) into a single logical link."
|
|
INDEX { swL2TrunkIndex }
|
|
::= { swL2TrunkCtrlTable 1 }
|
|
|
|
SwL2TrunkCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2TrunkIndex
|
|
INTEGER,
|
|
swL2TrunkName
|
|
DisplayString,
|
|
swL2TrunkMasterPort
|
|
INTEGER,
|
|
swL2TrunkMember
|
|
PortList,
|
|
swL2TrunkFloodingPort
|
|
INTEGER,
|
|
swL2TrunkType
|
|
INTEGER,
|
|
swL2TrunkState
|
|
RowStatus
|
|
}
|
|
|
|
swL2TrunkIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of logical port trunk. The trunk group number depend
|
|
on the existence of unit and module."
|
|
::= { swL2TrunkCtrlEntry 1 }
|
|
|
|
swL2TrunkName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..12))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of logical port trunk."
|
|
::= { swL2TrunkCtrlEntry 2 }
|
|
|
|
|
|
swL2TrunkMasterPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the master port number of the port trunk
|
|
entry. When using Port Trunk, you can not configure the other
|
|
ports of the group except the master port.
|
|
Their configuration must be same as the master port (e.g. speed,
|
|
duplex, enabled/disabled, flow control, and so on)."
|
|
::= { swL2TrunkCtrlEntry 3 }
|
|
|
|
swL2TrunkMember OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate how many number of ports is included in this Trunk.
|
|
The trunk port number depend on the existence of module.
|
|
The maximum number of ports is 8 for one trunks."
|
|
::= { swL2TrunkCtrlEntry 4 }
|
|
|
|
swL2TrunkFloodingPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the flooding port number of the port trunk
|
|
entry. The first port of the trunk is implicitly configured to
|
|
be the flooding port."
|
|
::= { swL2TrunkCtrlEntry 5 }
|
|
|
|
swL2TrunkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
static(2),
|
|
lacp(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicated that type of the trunk group.
|
|
static : is static trunk group
|
|
lacp : is LACP trunk group . "
|
|
::= { swL2TrunkCtrlEntry 6 }
|
|
|
|
swL2TrunkState OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry."
|
|
::= { swL2TrunkCtrlEntry 7 }
|
|
|
|
swL2TrunkAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
--other(1),
|
|
--mac-source(2),
|
|
--mac-destination(3),
|
|
--mac-source-dest(4),
|
|
--ip-source(5),
|
|
--ip-destination(6),
|
|
--ip-source-dest(7)
|
|
other(1),
|
|
mac-source(2),
|
|
mac-destination(3),
|
|
mac-source-dest(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures to part of the packet examined by the
|
|
switch when selecting the egress port for transmitting
|
|
load-sharing data."
|
|
::= { swL2TrunkMgmt 4 }
|
|
--Add by Max~ Jan 11,2006
|
|
swL2TrunkLACPPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrunkLACPPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifys which ports group a set of ports(up to 8)
|
|
into a single logical link."
|
|
::= { swL2TrunkMgmt 5 }
|
|
|
|
swL2TrunkLACPPortEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrunkLACPPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information specifies which ports group a set of
|
|
ports(up to 8) into a single logical link."
|
|
INDEX { swL2TrunkLACPPortIndex }
|
|
::= { swL2TrunkLACPPortTable 1 }
|
|
|
|
SwL2TrunkLACPPortEntry ::=
|
|
SEQUENCE {
|
|
swL2TrunkLACPPortIndex
|
|
INTEGER,
|
|
swL2TrunkLACPPortState
|
|
INTEGER
|
|
}
|
|
|
|
swL2TrunkLACPPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of logical port lacp. "
|
|
::= { swL2TrunkLACPPortEntry 1 }
|
|
|
|
swL2TrunkLACPPortState OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
active(1),
|
|
passive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of logical port lacp."
|
|
::= { swL2TrunkLACPPortEntry 2 }
|
|
|
|
-- **************************************************************************
|
|
-- swPortMirrorPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 }
|
|
-- **************************************************************************
|
|
|
|
-- ***** VEGS-2244 Not Supported *****
|
|
|
|
-- swL2MirrorLogicTargetPort OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates switch which port will sniff another
|
|
-- port. A trunk port member cannot be configured as a target
|
|
-- Snooping port. The port number is the sequential (logical)
|
|
-- number which is also applied to bridge MIB, etc."
|
|
-- ::= { swL2MirrorMgmt 1 }
|
|
|
|
-- swL2MirrorPortSourceIngress OBJECT-TYPE
|
|
-- SYNTAX PortList
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The represent the ingress into the source port packet to
|
|
-- sniffed."
|
|
-- ::= { swL2MirrorMgmt 2 }
|
|
|
|
-- swL2MirrorPortSourceEgress OBJECT-TYPE
|
|
-- SYNTAX PortList
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The represent the egress from the source port packet to
|
|
-- sniffed."
|
|
-- ::= { swL2MirrorMgmt 3 }
|
|
|
|
swL2MirrorLogicSourcePort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port that will be mirrored. All packets entering and leaving
|
|
the source port can be duplicated in the ingress_target and
|
|
egress_target port port. The port number is the sequential (logical)
|
|
number which is also applied to bridge MIB, etc."
|
|
::= { swL2MirrorMgmt 1 }
|
|
|
|
swL2MirrorPortTargetIngress OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the mirroring of only packets received
|
|
(flowing into) the port or ports in the port list."
|
|
::= { swL2MirrorMgmt 2 }
|
|
|
|
swL2MirrorPortTargetEgress OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allows the mirroring of only packets sent
|
|
(flowing out of) the port or ports in the port list."
|
|
::= { swL2MirrorMgmt 3 }
|
|
|
|
swL2MirrorPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the port mirroring state.
|
|
|
|
other(1) - this entry is currently in use but the conditions
|
|
under which it will remain so are different from each of the
|
|
following values.
|
|
disabled(2) - writing this value to the object, and then the
|
|
corresponding entry will be removed from the table.
|
|
enabled(3) - this entry is reside in the table."
|
|
::= { swL2MirrorMgmt 4 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 }
|
|
-- ********************************************************************
|
|
|
|
swL2IGMPMaxSupportedVlans OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of Vlans in the layer 2 IGMP control table
|
|
(swL2IGMPCtrlTable)."
|
|
::= { swL2IGMPMgmt 1 }
|
|
|
|
swL2IGMPMaxIpGroupNumPerVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of multicast ip group per Vlan in the layer 2
|
|
IGMP information table (swL2IGMPQueryInfoTable)."
|
|
::= { swL2IGMPMgmt 2 }
|
|
|
|
-- swL2IGMPLastQueryIPAddr OBJECT-TYPE
|
|
-- SYNTAX IpAddress
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the ip address of last send IGMP query
|
|
-- packet."
|
|
-- ::= { swL2IGMPMgmt 3 }
|
|
|
|
swL2IGMPCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table controls the Vlan's IGMP function. Its scale depends
|
|
on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled
|
|
mode, there is only one entry in the table, with index 1. If
|
|
VLAN is in Port-Base or 802.1q mode, the number of entries can
|
|
be up to 12, with index range from 1 to 12."
|
|
::= { swL2IGMPMgmt 3 }
|
|
|
|
swL2IGMPCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry in IGMP control table (swL2IGMPCtrlTable). The entry
|
|
is effective only when IGMP capture switch
|
|
(swL2DevCtrlIGMPSnooping) is enabled."
|
|
INDEX { swL2IGMPCtrlVid }
|
|
::= { swL2IGMPCtrlTable 1 }
|
|
|
|
SwL2IGMPCtrlEntry ::=
|
|
SEQUENCE {
|
|
-- swL2IGMPCtrlIndex
|
|
-- INTEGER,
|
|
swL2IGMPCtrlVid
|
|
INTEGER,
|
|
swL2IGMPQueryInterval
|
|
INTEGER,
|
|
swL2IGMPMaxResponseTime
|
|
INTEGER,
|
|
swL2IGMPRobustness
|
|
INTEGER,
|
|
swL2IGMPLastMemberQueryInterval
|
|
INTEGER,
|
|
swL2IGMPHostTimeout
|
|
INTEGER,
|
|
swL2IGMPRouteTimeout
|
|
INTEGER,
|
|
swL2IGMPLeaveTimer
|
|
INTEGER,
|
|
swL2IGMPQueryState
|
|
INTEGER,
|
|
swL2IGMPCurrentState
|
|
INTEGER,
|
|
swL2IGMPCtrlState
|
|
INTEGER
|
|
}
|
|
|
|
-- swL2IGMPCtrlIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..12)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the IGMP control entry number.Its scale
|
|
-- depends on current VLAN state (swL2VlanInfoStatus). If VLAN is
|
|
-- disabled, there is only one entry in the table, with index 1.
|
|
-- If VLAN is in Port-Base or 802.1q mode, the number of entries
|
|
-- is 12, with index range from 1 to 12."
|
|
-- ::= { swL2IGMPCtrlEntry 1 }
|
|
|
|
swL2IGMPCtrlVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the IGMP control entry's VLAN id. If VLAN
|
|
is disabled, the Vid is always 0 and cannot be changed by
|
|
management users. If VLAN is in Port-Base mode, the Vid is
|
|
arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode,
|
|
the Vid setting can vary from 1 to 4094 by management user, and
|
|
the Vid in each entry must be unique in the IGMP Control Table."
|
|
::= { swL2IGMPCtrlEntry 1 }
|
|
|
|
swL2IGMPQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The frequency at which IGMP Host-Query packets are
|
|
transmitted on this switch."
|
|
DEFVAL { 125 }
|
|
::= { swL2IGMPCtrlEntry 2 }
|
|
|
|
swL2IGMPMaxResponseTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..25)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum query response time on this switch."
|
|
DEFVAL { 10 }
|
|
::= { swL2IGMPCtrlEntry 3 }
|
|
|
|
swL2IGMPRobustness OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Robustness Variable allows tuning for the expected
|
|
packet loss on a subnet. If a subnet is expected to be
|
|
lossy, the Robustness Variable may be increased. IGMP is
|
|
robust to (Robustness Variable-1) packet losses."
|
|
DEFVAL { 2 }
|
|
::= { swL2IGMPCtrlEntry 4 }
|
|
|
|
swL2IGMPLastMemberQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Last Member Query Interval is the Max Response Time
|
|
inserted into Group-Specific Queries sent in response to
|
|
Leave Group messages, and is also the amount of time between
|
|
Group-Specific Query messages."
|
|
DEFVAL { 1 }
|
|
::= { swL2IGMPCtrlEntry 5 }
|
|
|
|
swL2IGMPHostTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16711450)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The timer value for sending IGMP query packet when none was
|
|
sent by the host in the LAN. The timer works in per-VLAN basis.
|
|
Our device will be activated to send the query message if the
|
|
timer is expired. Please reference RFC2236-1997."
|
|
DEFVAL { 260 }
|
|
::= { swL2IGMPCtrlEntry 6 }
|
|
|
|
swL2IGMPRouteTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16711450)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router Timeout is how long a host must wait after hearing
|
|
a Query before it may send any IGMPv2 messages."
|
|
DEFVAL { 260 }
|
|
::= { swL2IGMPCtrlEntry 7 }
|
|
|
|
swL2IGMPLeaveTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16711450)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When a querier receives a Leave Group message for a group that
|
|
has group members on the reception interface, it sends
|
|
Group-Specific Queries every swL2IGMPLeaveTimer to the group
|
|
being left."
|
|
DEFVAL { 1 }
|
|
::= { swL2IGMPCtrlEntry 8 }
|
|
|
|
swL2IGMPQueryState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object decide the IGMP query enabled or disabled."
|
|
::= { swL2IGMPCtrlEntry 9 }
|
|
|
|
swL2IGMPCurrentState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
querier(2),
|
|
non-querier(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the current IGMP query state."
|
|
::= { swL2IGMPCtrlEntry 10 }
|
|
|
|
swL2IGMPCtrlState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disable(2),
|
|
enable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry.
|
|
|
|
other(1) - this entry is currently in use but the conditions under
|
|
which it will remain so are different from each of the following
|
|
values.
|
|
disable(2) - IGMP funtion is disabled for this entry.
|
|
enable(3) - IGMP funtion is enabled for this entry."
|
|
::= { swL2IGMPCtrlEntry 11 }
|
|
|
|
swL2IGMPQueryInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPQueryInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains the number current IGMP query packets which
|
|
is captured by this device, as well as the IGMP query packets
|
|
sent by the device."
|
|
::= { swL2IGMPMgmt 4 }
|
|
|
|
swL2IGMPQueryInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPQueryInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about current IGMP query information, provided that
|
|
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
|
|
entry are all enabled."
|
|
INDEX { swL2IGMPInfoVid }
|
|
::= { swL2IGMPQueryInfoTable 1 }
|
|
|
|
SwL2IGMPQueryInfoEntry ::=
|
|
SEQUENCE {
|
|
-- swL2IGMPInfoIndex
|
|
-- INTEGER,
|
|
swL2IGMPInfoVid
|
|
INTEGER,
|
|
swL2IGMPInfoQueryCount
|
|
INTEGER,
|
|
swL2IGMPInfoTxQueryCount
|
|
INTEGER
|
|
}
|
|
|
|
-- swL2IGMPInfoIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (1..12)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This object indicates the IGMP query information entry
|
|
-- number. It could be up to 12 entries, depending on current
|
|
-- number of VLAN entries."
|
|
-- ::= { swL2IGMPQueryInfoEntry 1 }
|
|
|
|
swL2IGMPInfoVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Vid of associated IGMP info table
|
|
entry. It follows swL2IGMPCtrlVid in the associated entry of
|
|
IGMP control table (swL2IGMPCtrlTable)."
|
|
::= { swL2IGMPQueryInfoEntry 1 }
|
|
|
|
swL2IGMPInfoQueryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the number of query packets received
|
|
since the IGMP function enabled, in per-VLAN basis."
|
|
::= { swL2IGMPQueryInfoEntry 2 }
|
|
|
|
swL2IGMPInfoTxQueryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the send count of IGMP query messages, in
|
|
per-VLAN basis. In case of IGMP timer expiration, the switch
|
|
sends IGMP query packets to related VLAN member ports and
|
|
increment this object by 1."
|
|
::= { swL2IGMPQueryInfoEntry 3 }
|
|
|
|
swL2IGMPInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2IGMPInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table containing current IGMP information which captured by
|
|
this device, provided that swL2DevCtrlIGMPSnooping and
|
|
swL2IGMPCtrlState of associated VLAN entry are all enabled. Note
|
|
that the priority of IGMP table entries is lower than Filtering
|
|
Table, i.e. if there is a table hash collision between the
|
|
entries of IGMP Table and Filtering Table inside the switch H/W
|
|
address table, then Filtering Table entry overwrite the
|
|
colliding entry of IGMP Table. See swL2FilterMgmt description
|
|
also."
|
|
::= { swL2IGMPMgmt 5 }
|
|
|
|
swL2IGMPInfoEntry OBJECT-TYPE
|
|
SYNTAX SwL2IGMPInfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about current IGMP information which captured by
|
|
this device, provided that swL2DevCtrlIGMPSnooping and
|
|
swL2IGMPCtrlState of associated VLAN entry are all enabled."
|
|
INDEX { swL2IGMPVid , swL2IGMPGroupIpAddr }
|
|
::= { swL2IGMPInfoTable 1 }
|
|
|
|
SwL2IGMPInfoEntry ::=
|
|
SEQUENCE {
|
|
swL2IGMPVid
|
|
INTEGER,
|
|
swL2IGMPGroupIpAddr
|
|
IpAddress,
|
|
swL2IGMPMacAddr
|
|
MacAddress,
|
|
swL2IGMPPortMap
|
|
PortList,
|
|
swL2IGMPIpGroupReportCount
|
|
INTEGER
|
|
}
|
|
|
|
swL2IGMPVid OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Vid of individual IGMP table entry.
|
|
It shows the Vid of IGMP report information captured on
|
|
network."
|
|
::= { swL2IGMPInfoEntry 1 }
|
|
|
|
swL2IGMPGroupIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is identify group ip address which is captured from
|
|
IGMP packet, in per-Vlan basis."
|
|
::= { swL2IGMPInfoEntry 2 }
|
|
|
|
swL2IGMPMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is identify mac address which is corresponding
|
|
to swL2IGMPGroupIpAddr, in per-Vlan basis."
|
|
::= { swL2IGMPInfoEntry 3 }
|
|
|
|
swL2IGMPPortMap OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates which ports are belong to the same
|
|
multicast group, in per-Vlan basis. Each multicast group has a
|
|
octect string to indicate with port map. The most significant
|
|
bit represents the lowest numbered port, and the least
|
|
significant bit represents the highest numbered port. Thus, each
|
|
port of the switch is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1' then that
|
|
port is included in the set of ports; the port is not included
|
|
if its bit has a value of '0'(Note that the setting of the bit
|
|
corresponding to the port from which a frame is received is
|
|
irrelevant). The 4 octets is represent one unit port according
|
|
its logic port. If the unit less 32 port, the other port don't
|
|
care just fill zero."
|
|
::= { swL2IGMPInfoEntry 4 }
|
|
|
|
swL2IGMPIpGroupReportCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicate how much report packet was receive by our
|
|
device corresponding with this entry from IGMP function enabled,
|
|
in per-Vlan basis."
|
|
::= { swL2IGMPInfoEntry 5 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 }
|
|
-- ********************************************************************
|
|
swL2TrafficCtrlBMStromthreshold OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
packets-10(1),
|
|
packets-100(2),
|
|
packets-1000(3),
|
|
packets-10000(4),
|
|
packets-15000(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object to decide how much thousand packets per second
|
|
broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl,
|
|
swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlDlfStromCtrl
|
|
objects whether is enabled) will active storm control. Whenever
|
|
a port reaches its configured amount of packets in the one
|
|
second time interval, the device will start dropping that type
|
|
of packet, until the time interval has expired. Once the time
|
|
interval has expired, the device will start forwarding that type
|
|
of packet."
|
|
::= { swL2TrafficMgmt 1 }
|
|
|
|
|
|
swL2TrafficCtrlBcastStromCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates broadcast storm control function is
|
|
enabled or disabled."
|
|
::= { swL2TrafficMgmt 2 }
|
|
|
|
swL2TrafficCtrlMcastStromCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates multicast storm control function is
|
|
enabled or disabled."
|
|
::= { swL2TrafficMgmt 3 }
|
|
|
|
swL2TrafficCtrlDlfStromCtrl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates destination lookup fail function is
|
|
enabled or disabled."
|
|
::= { swL2TrafficMgmt 4 }
|
|
|
|
swL2TrafficPortCtrlTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwL2TrafficPortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifys the storm traffic control configuration."
|
|
::= { swL2TrafficMgmt 5 }
|
|
|
|
swL2TrafficPortCtrlEntry OBJECT-TYPE
|
|
SYNTAX SwL2TrafficPortCtrlEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of information specifies the storm traffic control
|
|
configuration."
|
|
INDEX { swL2TrafficCtrlGroupIndex }
|
|
::= { swL2TrafficPortCtrlTable 1 }
|
|
|
|
SwL2TrafficPortCtrlEntry ::=
|
|
SEQUENCE {
|
|
swL2TrafficCtrlGroupIndex
|
|
INTEGER,
|
|
--swL2TrafficCtrlUnitIndex
|
|
-- INTEGER,
|
|
swL2TrafficCtrlPortStatus
|
|
INTEGER
|
|
}
|
|
|
|
swL2TrafficCtrlGroupIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of logical port trunk. The trunk group number depend
|
|
on the existence of unit and module."
|
|
::= { swL2TrafficPortCtrlEntry 1 }
|
|
|
|
-- swL2TrafficCtrlUnitIndex OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Indicates ID of the unit in the device"
|
|
-- ::= { swL2TrafficPortCtrlEntry 2 }
|
|
|
|
swL2TrafficCtrlPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
disabled(2),
|
|
enabled(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates destination lookup fail function is
|
|
enabled or disabled."
|
|
::= { swL2TrafficPortCtrlEntry 3 }
|
|
|
|
|
|
-- ********************************************************************
|
|
-- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 }
|
|
-- ********************************************************************
|
|
-- swL2TrafficSegTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF SwL2TrafficSegEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "This table specifys the port just can forward traffic to the
|
|
-- specific port list."
|
|
-- ::= { swL2TrafficSegMgmt 1 }
|
|
--
|
|
-- swL2TrafficSegEntry OBJECT-TYPE
|
|
-- SYNTAX SwL2TrafficSegEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A list of information specifies the port with its traffic
|
|
-- forward list."
|
|
-- INDEX { swL2TrafficSegPort }
|
|
-- ::= { swL2TrafficSegTable 1 }
|
|
--
|
|
-- SwL2TrafficSegEntry ::=
|
|
-- SEQUENCE {
|
|
-- swL2TrafficSegPort
|
|
-- INTEGER,
|
|
-- swL2TrafficSegForwardPorts
|
|
-- PortList
|
|
-- }
|
|
--
|
|
-- swL2TrafficSegPort OBJECT-TYPE
|
|
-- SYNTAX INTEGER (0..65535)
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The port number of the logical port."
|
|
-- ::= { swL2TrafficSegEntry 1 }
|
|
--
|
|
-- swL2TrafficSegForwardPorts OBJECT-TYPE
|
|
-- SYNTAX PortList
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The port list that the specific port can forward traffic."
|
|
-- ::= { swL2TrafficSegEntry 2 }
|
|
|
|
|
|
|
|
-- ******************************************************************************************
|
|
-- Layer 2 Trap
|
|
-- ******************************************************************************************
|
|
|
|
|
|
swL2Notify OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 1 }
|
|
|
|
|
|
|
|
--swL2NotifyMgmt OBJECT IDENTIFIER ::= { swL2Notify 1 }
|
|
swL2NotifyPrefix OBJECT IDENTIFIER ::= { swL2Notify 2 }
|
|
|
|
|
|
|
|
swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
|
|
|
|
|
|
|
|
|
|
-- ******************************************************************************************
|
|
-- swL2NotifyMgmt
|
|
-- ******************************************************************************************
|
|
|
|
|
|
-- ******************************************************************************************
|
|
|
|
-- swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 }
|
|
|
|
-- ******************************************************************************************
|
|
-- swL2NotifFirmware
|
|
-- ******************************************************************************************
|
|
|
|
swL2macNotification NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
swL2macNotifyInfo
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This trap indicates the mac addresses variation in address table . "
|
|
|
|
::= { swL2NotifFirmware 1 }
|
|
|
|
swL2porttypechg NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
swL2PortInfoPortIndex,
|
|
swL2PortInfoType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This trap indicates the port type change. "
|
|
|
|
::= { swL2NotifFirmware 2 }
|
|
|
|
|
|
-- ******************************************************************************************
|
|
-- agentNotifEquipment
|
|
-- ******************************************************************************************
|
|
|
|
|
|
-- ******************************************************************************************
|
|
-- notificationBidings
|
|
-- ******************************************************************************************
|
|
|
|
swl2NotificationBidings OBJECT IDENTIFIER ::= { swL2NotifyPrefix 1 }
|
|
|
|
swL2macNotifyInfo OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..1024))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the last time reboot information.
|
|
"
|
|
::= { swl2NotificationBidings 1 }
|
|
|
|
|
|
|
|
END
|