Observium_CE/mibs/cisco/CISCO-CALL-APPLICATION-MIB

5297 lines
185 KiB
Plaintext

-- *****************************************************************
-- Cisco Call Application MIB
--
-- Dec 1999, Vasmi Abidi
-- March 2003, Shanmukh Rao
--
-- Copyright (c) 1999, 2003 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-CALL-APPLICATION-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Gauge32, Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, TimeStamp, TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
ciscoMgmt
FROM CISCO-SMI
ZeroBasedCounter32
FROM RMON2-MIB;
ciscoCallApplicationMIB MODULE-IDENTITY
LAST-UPDATED "200305130001Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-voice@cisco.com"
DESCRIPTION
"This MIB allows management of call applications on a
network device. A 'call application' is a software module
that processes calls, such as data, voice, video, or fax
calls.
"
REVISION "200305130001Z"
DESCRIPTION
"The changes to this MIB now provide call application
statistics for monitoring the call applications.
These call application stats are divided into 3 levels
- per gateway level (Global).
- per application-type level.
- per application-instance level.
| Level/State | Active | History
| -------------+------------------+----------------
| Global lvl| Gauges | Counters
| -------------+------------------+----------------
| App-Type lvl| Gauges records | Counter records
| -------------+------------------+----------------
| App-Inst lvl| Not available | Counter records
v -------------+------------------+----------------
An applicaiton gateway can have multiple types of call
applications aka application scripts. User calls could
be handled by any of this application types (scripts).
Each user call can trigger an instance of this
application type.
An Application instance has a set of countres during
its active and non-active (history) phase. These are
available at App-Inst level records.
App-Type level records have aggregated counters/gauges
from all the application instances of its application
type.
Global level has aggregated counters/gauges from all
application-type records.
Gateway administrators are encouraged to follow
a 'top-down' approach for monitoring and troubleshooting.
This top-down approach emphasizes on polling 'Global
active level gauges' for monitoring load on the gateway
and 'Global history level counters' monitoring errors.
To find out more details about a particular gauge or
counter one can step down a level to App-Type level.
Similarly, to find out further details, one can goto a level
lower at 'Application-Instnace' for find out more details.
Finally, event-logs are available at the lowest level for
applicaiton instances.
Following changes are as per the above mentioned scheme.
- ccapAppGlobalAct group of objects are added to provide
'Active Global lvl' gauges.
- ccapAppGlobalHis group of objects are added to provide
'Active Global lvl' gauges.
- ccapApplicationTable is extended to provide
'Active App-Type lvl' gauges.
- ccapAppTypeHistoryTable is added to provided
'History App-Type lvl' counters.
- ccapAppInstanceHistoryTable is added to provide
'History App-Inst lvl' counters.
This MIB also provides call application interface stats.
The call application interfaces are the servers with
which applications do the transactions for various
services like HTTP, RTSP, TFTP, SMTP, AAA, ASR
(Automatic Speech Recognition), TTS (Text-To-Speech),
flash file read, RAM media recordings.
Following are the new objects/tables to provide
'Application-Interface' statistics.
- ccapAppIntfGlobal group of objects
- ccapAppIntfHTTPTable
- ccapAppIntfRTSPTable
- ccapAppIntfTFTPTable
- ccapAppIntfSMTPTable
- ccapAppIntfAAAMethodListTable
- ccapAppIntfASRTable
- ccapAppIntfTTSTable
- ccapAppIntfFlash group of objects
- ccapAppIntfRAMRecord group of objects
This MIB also provides facility to enable and
disable statistics monitoring for call application at
global level. Applicaion interface statistics can
also be enabled/disabled through this MIB. Statistics
can also be cleared at Global and App-type levels. Hence,
lot of objects which could be reset/cleared are defined
as ZeroBasedCounter32 TC based of Gauge32.
Clearing operation is done either through MIB
objects or through CLI (Command Line Interface). Clear
or resetting operation in applied to a group of countres.
For each group there is a 'discontinuity' object or
'lastResetTime' object provided which specifies the time
when associated group of objects were cleared.
Application infrastructure has facility to capture events
from active application instances and save them in event
log buffer in memory and later to FTP dump file. This is
referred as event logging mechanism. Event logging can
be enabled and disabled either from IOS CLI's or from SNMP
objects provided in this MIB change set. This event log
facility is available at 'Active and History App-Inst lvl'.
Event logging is also available at 'App-Interface lvl',
for per interface-type and per server of each interface
type.
This MIB provides facility to enable/disable application
event log facility for all active application instances.
However, the MIB does not provide objects to get the
event logs, since they can be bulky and degrade the
performance of the system. There are mechanisms to dump
the event logs to either stdout or ftp through IOS CLI
configurations."
REVISION "9909220000Z"
DESCRIPTION
"This MIB allows management of call applications on a
network device. A 'call application' is a software
module that processes calls, such as data, voice,
video, or fax calls.
Initial version 199909220000Z, Nov 22nd, 1999."
::= { ciscoMgmt 146 }
-- Terminology
-- Textual Conventions
URLStringOrNull ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A Uniform Resource Locator represented in accordance
with RFC 1738, or an empty string."
SYNTAX OCTET STRING (SIZE (0..255))
ServerNameString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes an objects which represents an unique
server identifier. This server identifier string constitutes
from server name and/or ipaddress and/or AAA method list
and/or part of URL.
Typically this TC is used in tables where the INDEX could be
DNS name or string form of IP address or part of URL or just
a unique string."
SYNTAX OCTET STRING (SIZE (1..255))
ciscoCallApplicationMIBObjects OBJECT IDENTIFIER ::=
{ ciscoCallApplicationMIB 1 }
-- groups
ccapConf OBJECT IDENTIFIER ::=
{ ciscoCallApplicationMIBObjects 1 }
ccapAppTypeHisStat OBJECT IDENTIFIER ::=
{ ciscoCallApplicationMIBObjects 2 }
ccapAppInstHisStat OBJECT IDENTIFIER ::=
{ ciscoCallApplicationMIBObjects 3 }
ccapAppGblActStat OBJECT IDENTIFIER ::=
{ ciscoCallApplicationMIBObjects 4 }
ccapAppGblHisStat OBJECT IDENTIFIER ::=
{ ciscoCallApplicationMIBObjects 5 }
ccapAppIntf OBJECT IDENTIFIER ::=
{ ciscoCallApplicationMIBObjects 6 }
-- The Call Application Table
ccapApplicationTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcapApplicationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about call applications on this managed
device. There is an entry in this table for each call
application."
::= { ccapConf 1 }
ccapApplicationEntry OBJECT-TYPE
SYNTAX CcapApplicationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a call application."
INDEX { IMPLIED ccapAppName }
::= { ccapApplicationTable 1 }
CcapApplicationEntry ::=
SEQUENCE {
ccapAppName SnmpAdminString,
ccapAppLocation URLStringOrNull,
ccapAppLoadState INTEGER,
ccapAppLoadFailReason INTEGER,
ccapAppDescr SnmpAdminString,
ccapAppCallType OCTET STRING,
ccapAppRowStatus RowStatus,
ccapAppActiveInstances Gauge32,
ccapAppEventLogging TruthValue,
ccapAppPSTNInCallNowConn Gauge32,
ccapAppPSTNOutCallNowConn Gauge32,
ccapAppIPInCallNowConn Gauge32,
ccapAppIPOutCallNowConn Gauge32,
ccapAppPlaceCallInProgress Gauge32,
ccapAppHandoffInProgress Gauge32,
ccapAppPromptPlayActive Gauge32,
ccapAppRecordingActive Gauge32,
ccapAppTTSActive Gauge32
}
ccapAppName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..40))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of this call application."
::= { ccapApplicationEntry 1 }
ccapAppLocation OBJECT-TYPE
SYNTAX URLStringOrNull
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the location from where this application is
loaded.
For built-in applications, the value will always
be an empty string.
If the location is not specified or not known, value is
an empty string.
Note that a particular agent may support only certain
types of URLs (e.g., only tftp://...). Thus, the valid
values of this object are implementation dependent.
An agent may respond with an error (e.g., 'wrongValue')
to a management SET operation which attempts to modify
the value of this object to one which is not supported
by the managed device.
The value of this object may be changed at any time.
However, note that setting this value for an active
row will cause the old application to be deleted, and
the new application (i.e. the program at the
newly-specified URL) to be loaded."
::= { ccapApplicationEntry 2 }
ccapAppLoadState OBJECT-TYPE
SYNTAX INTEGER {
builtIn(1),
loading(2),
loaded(3),
loadFailed(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this application.
For built-in applications, the value read is always
'builtIn'.
When this row is made active, the agent attempts to
load the application from the URL specified by
ccapAppLocation. While loading is in progress, value of
this object reads 'loading'. If the application is
successfully loaded, the value changes to 'loaded',
otherwise the value changes to 'loadFailed'.
"
::= { ccapApplicationEntry 3 }
ccapAppLoadFailReason OBJECT-TYPE
SYNTAX INTEGER {
none(1),
other(2),
notFound(3),
timedOut(4),
noPermission(5),
badSignature(6),
noSpace(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason the last attempted load failed.
The possible values are:
none - there was no failure
other - failure reason is other than those
listed below
notFound - application was not found
timedOut - timed out while loading
noPermission - was denied permission
badSignature - the application did not have the
proper signature. An agent may use an
authentication scheme to protect itself. This
error indicates that the authentication check
failed, hence the application was not loaded.
noSpace - lack of memory space.
The value is updated after a load attempt.
"
::= { ccapApplicationEntry 4 }
ccapAppDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A description of this application.
"
DEFVAL {""}
::= { ccapApplicationEntry 5 }
ccapAppCallType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the types of call that this application can
handle. 0 is voice, 1 is fax, 3 is data, 4 is video."
-- DEFVAL {voice}
::= { ccapApplicationEntry 6 }
ccapAppRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
Note that rows corresponding to built-in applications
cannot be modified. Thus, this object is read-only for
such rows.
This object can not be set to 'active' until a value
has been assigned to the corresponding instance of
ccapAppLocation. When a row becomes active, the agent
attempts to load the application from the location
specified by ccapAppLocation. The result of the loading
operation can be monitored by the objects
ccapAppLoadState and ccapAppLoadError.
Deleting a row will cause the agent to unload the
corresponding application.
"
::= { ccapApplicationEntry 7 }
ccapAppActiveInstances OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of application instances currently active
of an application type from ccapApplicationTable."
::= { ccapApplicationEntry 8 }
ccapAppEventLogging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object by which management station can know if event
logging for this application type is enabled or
disabled for all the instances of this application
type."
::= { ccapApplicationEntry 9 }
ccapAppPSTNInCallNowConn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of PSTN incoming calls connected and
handled by this application type at this moment."
::= { ccapApplicationEntry 10 }
ccapAppPSTNOutCallNowConn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of PSTN outgoing calls (placed calls
to PSTN) connected and handled by this application
type at this moment."
::= { ccapApplicationEntry 11 }
ccapAppIPInCallNowConn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP calls connected and
handled by this application type at this moment."
::= { ccapApplicationEntry 12 }
ccapAppIPOutCallNowConn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP outgoing (placed to IP) calls
connected and handled by this application type at
this moment."
::= { ccapApplicationEntry 13 }
ccapAppPlaceCallInProgress OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of pending place calls requests from
all the active instances of this application type."
::= { ccapApplicationEntry 14 }
ccapAppHandoffInProgress OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of pending handoff requests from all
the active instances of this application type."
::= { ccapApplicationEntry 15 }
ccapAppPromptPlayActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of active prompts for all the active
instances of this application type."
::= { ccapApplicationEntry 16 }
ccapAppRecordingActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of active recording for all the active
instances of this application type."
::= { ccapApplicationEntry 17 }
ccapAppTTSActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of active TTS (Text-To-Speech) for all
the active instances of this application type."
::= { ccapApplicationEntry 18 }
--
-- Application Type History Table
--
ccapAppTypeHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcapAppTypeHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information from history instances of application types."
::= { ccapAppTypeHisStat 2 }
ccapAppTypeHistoryEntry OBJECT-TYPE
SYNTAX CcapAppTypeHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information from all the history instances of an
IOS call application type."
INDEX { IMPLIED ccapAppName }
::= { ccapAppTypeHistoryTable 1 }
CcapAppTypeHistoryEntry ::= SEQUENCE {
-- PSTN Incoming Call to Application History Type
ccapAppTypeHisEvtLogging TruthValue,
ccapAppTypeHisLastResetTime TimeStamp,
ccapAppTypeHisPSTNInCallSetupInd ZeroBasedCounter32,
ccapAppTypeHisPSTNInCallTotConn ZeroBasedCounter32,
ccapAppTypeHisPSTNInCallHandedOut ZeroBasedCounter32,
ccapAppTypeHisPSTNInCallHandOutRet ZeroBasedCounter32,
ccapAppTypeHisPSTNInCallInHandoff ZeroBasedCounter32,
ccapAppTypeHisPSTNInCallInHandoffRet ZeroBasedCounter32,
ccapAppTypeHisPSTNInCallDiscNormal ZeroBasedCounter32,
ccapAppTypeHisPSTNInCallDiscUsrErr ZeroBasedCounter32,
ccapAppTypeHisPSTNInCallDiscSysErr ZeroBasedCounter32,
-- PSTN Outgoing Placed Call from Application History Type
ccapAppTypeHisPSTNOutCallSetupReq ZeroBasedCounter32,
ccapAppTypeHisPSTNOutCallTotConn ZeroBasedCounter32,
ccapAppTypeHisPSTNOutCallHandedOut ZeroBasedCounter32,
ccapAppTypeHisPSTNOutCallHandOutRet ZeroBasedCounter32,
ccapAppTypeHisPSTNOutCallInHandoff ZeroBasedCounter32,
ccapAppTypeHisPSTNOutCallInHandoffRet ZeroBasedCounter32,
ccapAppTypeHisPSTNOutCallDiscNormal ZeroBasedCounter32,
ccapAppTypeHisPSTNOutCallDiscUsrErr ZeroBasedCounter32,
ccapAppTypeHisPSTNOutCallDiscSysErr ZeroBasedCounter32,
--
-- IP Incoming Call to Application History Type
--
ccapAppTypeHisIPInCallSetupInd ZeroBasedCounter32,
ccapAppTypeHisIPInCallTotConn ZeroBasedCounter32,
ccapAppTypeHisIPInCallHandedOut ZeroBasedCounter32,
ccapAppTypeHisIPInCallHandOutRet ZeroBasedCounter32,
ccapAppTypeHisIPInCallInHandoff ZeroBasedCounter32,
ccapAppTypeHisIPInCallInHandoffRet ZeroBasedCounter32,
ccapAppTypeHisIPInCallDiscNormal ZeroBasedCounter32,
ccapAppTypeHisIPInCallDiscUsrErr ZeroBasedCounter32,
ccapAppTypeHisIPInCallDiscSysErr ZeroBasedCounter32,
-- IP Outgoing Placed Call from Application History Type
ccapAppTypeHisIPOutCallSetupReq ZeroBasedCounter32,
ccapAppTypeHisIPOutCallTotConn ZeroBasedCounter32,
ccapAppTypeHisIPOutCallHandedOut ZeroBasedCounter32,
ccapAppTypeHisIPOutCallHandOutRet ZeroBasedCounter32,
ccapAppTypeHisIPOutCallInHandoff ZeroBasedCounter32,
ccapAppTypeHisIPOutCallInHandoffRet ZeroBasedCounter32,
ccapAppTypeHisIPOutCallDiscNormal ZeroBasedCounter32,
ccapAppTypeHisIPOutCallDiscUsrErr ZeroBasedCounter32,
ccapAppTypeHisIPOutCallDiscSysErr ZeroBasedCounter32,
-- Application Internal services
ccapAppTypeHisPlaceCallAttempts ZeroBasedCounter32,
ccapAppTypeHisPlaceCallSuccess ZeroBasedCounter32,
ccapAppTypeHisPlaceCallFailure ZeroBasedCounter32,
ccapAppTypeHisInHandoffCallback ZeroBasedCounter32,
ccapAppTypeHisInHandoffCallbackRet ZeroBasedCounter32,
ccapAppTypeHisInHandoffNoCallback ZeroBasedCounter32,
ccapAppTypeHisOutHandoffCallback ZeroBasedCounter32,
ccapAppTypeHisOutHandoffCallbackRet ZeroBasedCounter32,
ccapAppTypeHisOutHandoffNoCallback ZeroBasedCounter32,
ccapAppTypeHisOutHandofffailures ZeroBasedCounter32,
ccapAppTypeHisDocumentReadAttempts ZeroBasedCounter32,
ccapAppTypeHisDocumentReadSuccess ZeroBasedCounter32,
ccapAppTypeHisDocumentReadFailures ZeroBasedCounter32,
ccapAppTypeHisDocumentParseErrors ZeroBasedCounter32,
ccapAppTypeHisDocumentWriteAttempts ZeroBasedCounter32,
ccapAppTypeHisDocumentWriteSuccess ZeroBasedCounter32,
ccapAppTypeHisDocumentWriteFailures ZeroBasedCounter32,
-- Subscriber Interaction/Behaviour services
ccapAppTypeHisDTMFAttempts ZeroBasedCounter32,
ccapAppTypeHisDTMFAborted ZeroBasedCounter32,
ccapAppTypeHisDTMFNoMatch ZeroBasedCounter32,
ccapAppTypeHisDTMFNoInput ZeroBasedCounter32,
ccapAppTypeHisDTMFMatch ZeroBasedCounter32,
ccapAppTypeHisDTMFLongPound ZeroBasedCounter32,
ccapAppTypeHisASRAttempts ZeroBasedCounter32,
ccapAppTypeHisASRAborted ZeroBasedCounter32,
ccapAppTypeHisASRNoMatch ZeroBasedCounter32,
ccapAppTypeHisASRNoInput ZeroBasedCounter32,
ccapAppTypeHisASRMatch ZeroBasedCounter32,
ccapAppTypeHisAAAAuthenticateFailure ZeroBasedCounter32,
ccapAppTypeHisAAAAuthenticateSuccess ZeroBasedCounter32,
ccapAppTypeHisAAAAuthorizeFailure ZeroBasedCounter32,
ccapAppTypeHisAAAAuthorizeSuccess ZeroBasedCounter32,
-- ASNL information pertaining to Applications
ccapAppTypeHisASNLSubscriptionsSent ZeroBasedCounter32,
ccapAppTypeHisASNLSubscriptionsSuccess ZeroBasedCounter32,
ccapAppTypeHisASNLSubscriptionsFailed ZeroBasedCounter32,
ccapAppTypeHisASNLNotifReceived ZeroBasedCounter32,
-- Media Stream information
ccapAppTypeHisPromptPlayAttempts ZeroBasedCounter32,
ccapAppTypeHisPromptPlaySuccess ZeroBasedCounter32,
ccapAppTypeHisPromptPlayFailed ZeroBasedCounter32,
ccapAppTypeHisPromptPlayDuration ZeroBasedCounter32,
ccapAppTypeHisRecordingAttempts ZeroBasedCounter32,
ccapAppTypeHisRecordingSuccess ZeroBasedCounter32,
ccapAppTypeHisRecordingFailed ZeroBasedCounter32,
ccapAppTypeHisRecordingDuration ZeroBasedCounter32,
ccapAppTypeHisTTSAttempts ZeroBasedCounter32,
ccapAppTypeHisTTSSuccess ZeroBasedCounter32,
ccapAppTypeHisTTSFailed ZeroBasedCounter32
}
-- PSTN Incoming Call to Application History Type
ccapAppTypeHisEvtLogging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object by which management station can know if event
logging for this application type is enabled or
disabled."
::= { ccapAppTypeHistoryEntry 1 }
ccapAppTypeHisLastResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the application information statistics
were last reset for this application type, either
through CLI or through ccapAppGblStatsClear object.
When the application information system is disabled on
the gateway, this object is also reset to zeros."
::= { ccapAppTypeHistoryEntry 2 }
ccapAppTypeHisPSTNInCallSetupInd OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup indications received by this
application type from the PSTN."
::= { ccapAppTypeHistoryEntry 3 }
ccapAppTypeHisPSTNInCallTotConn OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs connected by
this application type."
::= { ccapAppTypeHistoryEntry 4 }
ccapAppTypeHisPSTNInCallHandedOut OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that are
handed out to another application type because of
application handoff operation ."
::= { ccapAppTypeHistoryEntry 5 }
ccapAppTypeHisPSTNInCallHandOutRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that were
handed out with call back to another application,
and returned back to this type."
::= { ccapAppTypeHistoryEntry 6 }
ccapAppTypeHisPSTNInCallInHandoff OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that were
handed to this application type, with the handoff
operation, performed by another application type."
::= { ccapAppTypeHistoryEntry 7 }
ccapAppTypeHisPSTNInCallInHandoffRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of incoming PSTN call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppTypeHistoryEntry 8 }
ccapAppTypeHisPSTNInCallDiscNormal OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that
disconnected with 'normal' cause code in this
application type."
::= { ccapAppTypeHistoryEntry 9 }
ccapAppTypeHisPSTNInCallDiscUsrErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppTypeHistoryEntry 10 }
ccapAppTypeHisPSTNInCallDiscSysErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppTypeHistoryEntry 11 }
-- PSTN Outgoing Placed Call from Application History Type
ccapAppTypeHisPSTNOutCallSetupReq OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup requests placed out to PSTN
interface, by this application type."
::= { ccapAppTypeHistoryEntry 12 }
ccapAppTypeHisPSTNOutCallTotConn OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of PSTN placed call legs connected to
this application type."
::= { ccapAppTypeHistoryEntry 13 }
ccapAppTypeHisPSTNOutCallHandedOut OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that are
handed out to another application type because of
application handoff operation."
::= { ccapAppTypeHistoryEntry 14 }
ccapAppTypeHisPSTNOutCallHandOutRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that were
handed out with call back to another application,
returned back to this application type."
::= { ccapAppTypeHistoryEntry 15 }
ccapAppTypeHisPSTNOutCallInHandoff OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that were
handed to this application type, with the handoff
operation performed by another application type."
::= { ccapAppTypeHistoryEntry 16 }
ccapAppTypeHisPSTNOutCallInHandoffRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of outgoing PSTN call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppTypeHistoryEntry 17 }
ccapAppTypeHisPSTNOutCallDiscNormal OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that
disconnected with 'normal' cause code in this
application type."
::= { ccapAppTypeHistoryEntry 18 }
ccapAppTypeHisPSTNOutCallDiscUsrErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppTypeHistoryEntry 19 }
ccapAppTypeHisPSTNOutCallDiscSysErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppTypeHistoryEntry 20 }
-- IP Incoming Call to Application History Type
ccapAppTypeHisIPInCallSetupInd OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup indications received by this
application type from the IP interface."
::= { ccapAppTypeHistoryEntry 21 }
ccapAppTypeHisIPInCallTotConn OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs connected by
this application type."
::= { ccapAppTypeHistoryEntry 22 }
ccapAppTypeHisIPInCallHandedOut OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that are handed
out to another application type because of application
handoff operation."
::= { ccapAppTypeHistoryEntry 23 }
ccapAppTypeHisIPInCallHandOutRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that were
handed out with call back to another application,
returned back to this type."
::= { ccapAppTypeHistoryEntry 24 }
ccapAppTypeHisIPInCallInHandoff OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that were
handed to this application type, with the handoff
operation, performed by another application type."
::= { ccapAppTypeHistoryEntry 25 }
ccapAppTypeHisIPInCallInHandoffRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of incoming IP call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppTypeHistoryEntry 26 }
ccapAppTypeHisIPInCallDiscNormal OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that
disconnected with 'normal' cause code in this
application type."
::= { ccapAppTypeHistoryEntry 27 }
ccapAppTypeHisIPInCallDiscUsrErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppTypeHistoryEntry 28 }
ccapAppTypeHisIPInCallDiscSysErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppTypeHistoryEntry 29 }
-- IP Outgoing Placed Call from Application Type
ccapAppTypeHisIPOutCallSetupReq OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup requests placed out to IP
interface, by this application type."
::= { ccapAppTypeHistoryEntry 30 }
ccapAppTypeHisIPOutCallTotConn OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP placed call legs connected to this
application type."
::= { ccapAppTypeHistoryEntry 31 }
ccapAppTypeHisIPOutCallHandedOut OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that are handed
out to another application type because of application
handoff operation."
::= { ccapAppTypeHistoryEntry 32 }
ccapAppTypeHisIPOutCallHandOutRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that were handed
out with call back to another application, returned
back to this application type."
::= { ccapAppTypeHistoryEntry 33 }
ccapAppTypeHisIPOutCallInHandoff OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that were handed
to this application type, with the handoff operation,
performed by another application type."
::= { ccapAppTypeHistoryEntry 34 }
ccapAppTypeHisIPOutCallInHandoffRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of outgoing IP call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppTypeHistoryEntry 35 }
ccapAppTypeHisIPOutCallDiscNormal OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that
disconnected with 'normal' cause code in this
application type."
::= { ccapAppTypeHistoryEntry 36 }
ccapAppTypeHisIPOutCallDiscUsrErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppTypeHistoryEntry 37 }
ccapAppTypeHisIPOutCallDiscSysErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppTypeHistoryEntry 38 }
-- Application History Type Internal services
ccapAppTypeHisPlaceCallAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of place call attempts performed by this
application type."
::= { ccapAppTypeHistoryEntry 39 }
ccapAppTypeHisPlaceCallSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of placecall attempts performed
successfully by this application type."
::= { ccapAppTypeHistoryEntry 40 }
ccapAppTypeHisPlaceCallFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of place call failures seen by this
application type."
::= { ccapAppTypeHistoryEntry 41 }
ccapAppTypeHisInHandoffCallback OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming handoffs with call back to
this application type."
::= { ccapAppTypeHistoryEntry 42 }
ccapAppTypeHisInHandoffCallbackRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of returned incoming handoffs with call
back, from this application type."
::= { ccapAppTypeHistoryEntry 43 }
ccapAppTypeHisInHandoffNoCallback OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming handoffs with no call backs
(blind handoffs) received by this application type."
::= { ccapAppTypeHistoryEntry 44 }
ccapAppTypeHisOutHandoffCallback OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of placed handoffs with call backs
(bridged handoffs) from this application type."
::= { ccapAppTypeHistoryEntry 45 }
ccapAppTypeHisOutHandoffCallbackRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of returned handoffs with callback
(bridged handoffs) to this application type."
::= { ccapAppTypeHistoryEntry 46 }
ccapAppTypeHisOutHandoffNoCallback OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of placed handoffs with no callback
(blind handoffs) from this application type."
::= { ccapAppTypeHistoryEntry 47 }
ccapAppTypeHisOutHandofffailures OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing handoff failures seen by
this application type, while trying to place an
outgoing handoff to another application."
::= { ccapAppTypeHistoryEntry 48 }
ccapAppTypeHisDocumentReadAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document read requests made by this
application type."
::= { ccapAppTypeHistoryEntry 49 }
ccapAppTypeHisDocumentReadSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document read by the application type.
"
::= { ccapAppTypeHistoryEntry 50 }
ccapAppTypeHisDocumentReadFailures OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document read errors for this
application type."
::= { ccapAppTypeHistoryEntry 51 }
ccapAppTypeHisDocumentParseErrors OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document parse errors or semantic
errors seen by this application."
::= { ccapAppTypeHistoryEntry 52 }
ccapAppTypeHisDocumentWriteAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document write attempts by this
application type."
::= { ccapAppTypeHistoryEntry 53 }
ccapAppTypeHisDocumentWriteSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document written successfully by this
application type."
::= { ccapAppTypeHistoryEntry 54 }
ccapAppTypeHisDocumentWriteFailures OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document write failures for this
application type."
::= { ccapAppTypeHistoryEntry 55 }
ccapAppTypeHisDTMFAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of attempts to read user DTMF input by
this application type."
::= { ccapAppTypeHistoryEntry 56 }
ccapAppTypeHisDTMFAborted OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of DTMF reads interrupts/aborts by
this application type."
::= { ccapAppTypeHistoryEntry 57 }
ccapAppTypeHisDTMFNoMatch OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of DTMF no match events on incorrect
user input, seen by this application type."
::= { ccapAppTypeHistoryEntry 58 }
ccapAppTypeHisDTMFNoInput OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of user input timeout on DTMF input
seen by this application type."
::= { ccapAppTypeHistoryEntry 59 }
ccapAppTypeHisDTMFMatch OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of DTMF input matched events seen by
this application type."
::= { ccapAppTypeHistoryEntry 60 }
ccapAppTypeHisDTMFLongPound OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of 'Long-Pound' user interrupts seen by
this application type."
::= { ccapAppTypeHistoryEntry 61 }
ccapAppTypeHisASRAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
attempts to read user speech input by this application
type."
::= { ccapAppTypeHistoryEntry 62 }
ccapAppTypeHisASRAborted OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
read interrupts/aborts by this application type."
::= { ccapAppTypeHistoryEntry 63 }
ccapAppTypeHisASRNoMatch OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
match events on user speech input, seen by this
application."
::= { ccapAppTypeHistoryEntry 64 }
ccapAppTypeHisASRNoInput OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
user speech input timeout events, seen by this
application type."
::= { ccapAppTypeHistoryEntry 65 }
ccapAppTypeHisASRMatch OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
user speech input matched events, seen by this
application type."
::= { ccapAppTypeHistoryEntry 66 }
ccapAppTypeHisAAAAuthenticateFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authenticate failures seen by this
application type."
::= { ccapAppTypeHistoryEntry 67 }
ccapAppTypeHisAAAAuthenticateSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authenticate success seen by this
application type."
::= { ccapAppTypeHistoryEntry 68 }
ccapAppTypeHisAAAAuthorizeFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authorize failures seen by this
application type."
::= { ccapAppTypeHistoryEntry 69 }
ccapAppTypeHisAAAAuthorizeSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authorize success seen by this
application type."
::= { ccapAppTypeHistoryEntry 70 }
ccapAppTypeHisASNLSubscriptionsSent OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscription sent by this
application type."
::= { ccapAppTypeHistoryEntry 71 }
ccapAppTypeHisASNLSubscriptionsSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscriptions success, seen by
this application type."
::= { ccapAppTypeHistoryEntry 72 }
ccapAppTypeHisASNLSubscriptionsFailed OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscription failures, seen by
this application type."
::= { ccapAppTypeHistoryEntry 73 }
ccapAppTypeHisASNLNotifReceived OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscriptions received by this
application type."
::= { ccapAppTypeHistoryEntry 74 }
ccapAppTypeHisPromptPlayAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of prompt play attempts made by this
application type."
::= { ccapAppTypeHistoryEntry 75 }
ccapAppTypeHisPromptPlaySuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of play prompt success, seen by this
application type."
::= { ccapAppTypeHistoryEntry 76 }
ccapAppTypeHisPromptPlayFailed OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of prompt play failures seen by this
application type."
::= { ccapAppTypeHistoryEntry 77 }
ccapAppTypeHisPromptPlayDuration OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total duration (in seconds), of all the prompt plays
performed by this application type."
::= { ccapAppTypeHistoryEntry 78 }
ccapAppTypeHisRecordingAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of record attempts made by this
application type."
::= { ccapAppTypeHistoryEntry 79 }
ccapAppTypeHisRecordingSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of recording success, seen by this
application type."
::= { ccapAppTypeHistoryEntry 80 }
ccapAppTypeHisRecordingFailed OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of recording failures seen by this
application type."
::= { ccapAppTypeHistoryEntry 81 }
ccapAppTypeHisRecordingDuration OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total duration (in seconds), of all the recordings
performed by this application type."
::= { ccapAppTypeHistoryEntry 82 }
ccapAppTypeHisTTSAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TTS (Text-To-Speech) play attempts
made by this application type."
::= { ccapAppTypeHistoryEntry 83 }
ccapAppTypeHisTTSSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TTS (Text-To-Speech) play success
seen by this application type."
::= { ccapAppTypeHistoryEntry 84 }
ccapAppTypeHisTTSFailed OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TTS (Text-To-Speech) play failures
seen by this application type."
::= { ccapAppTypeHistoryEntry 85 }
--
-- Application Instance History Table
--
ccapAppInstanceHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcapAppInstanceHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about history application instances of
an active application type.
This table provides in details about an application
instance when the applicaiton instancae has terminated.
Note: Active application instance records are not
available in any MIB because application instances when
active may change status from active to history very
quickly and instance record data is most of the time
inconclusive."
::= { ccapAppInstHisStat 3 }
ccapAppInstanceHistoryEntry OBJECT-TYPE
SYNTAX CcapAppInstanceHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a history instance of a IOS call application.
When an application instance is terminated an entry is created.
Entry is removed from this table on the following any one
condition -
a. Maximum number of records (configured via CLI) has reached.
b. Maximum number of time (configured via CLI) has reached.
In both the above cases oldest history record is purged out."
INDEX { ccapAppInstHisIndex }
::= { ccapAppInstanceHistoryTable 1 }
CcapAppInstanceHistoryEntry ::= SEQUENCE {
ccapAppInstHisIndex Unsigned32,
ccapAppInstHisSessionID Unsigned32,
ccapAppInstHisAppName OCTET STRING,
-- PSTN Incoming Call to Application History Instance
ccapAppInstHisPSTNInCallSetupInd Unsigned32,
ccapAppInstHisPSTNInCallTotConn Unsigned32,
ccapAppInstHisPSTNInCallHandedOut Unsigned32,
ccapAppInstHisPSTNInCallHandOutRet Unsigned32,
ccapAppInstHisPSTNInCallInHandoff Unsigned32,
ccapAppInstHisPSTNInCallInHandoffRet Unsigned32,
ccapAppInstHisPSTNInCallDiscNormal Unsigned32,
ccapAppInstHisPSTNInCallDiscUsrErr Unsigned32,
ccapAppInstHisPSTNInCallDiscSysErr Unsigned32,
-- PSTN Outgoing Placed Call from Application History Instance
ccapAppInstHisPSTNOutCallSetupReq Unsigned32,
ccapAppInstHisPSTNOutCallTotConn Unsigned32,
ccapAppInstHisPSTNOutCallHandedOut Unsigned32,
ccapAppInstHisPSTNOutCallHandOutRet Unsigned32,
ccapAppInstHisPSTNOutCallInHandoff Unsigned32,
ccapAppInstHisPSTNOutCallInHandoffRet Unsigned32,
ccapAppInstHisPSTNOutCallDiscNormal Unsigned32,
ccapAppInstHisPSTNOutCallDiscUsrErr Unsigned32,
ccapAppInstHisPSTNOutCallDiscSysErr Unsigned32,
--
-- IP Incoming Call to Application History Instance
--
ccapAppInstHisIPInCallSetupInd Unsigned32,
ccapAppInstHisIPInCallTotConn Unsigned32,
ccapAppInstHisIPInCallHandedOut Unsigned32,
ccapAppInstHisIPInCallHandOutRet Unsigned32,
ccapAppInstHisIPInCallInHandoff Unsigned32,
ccapAppInstHisIPInCallInHandoffRet Unsigned32,
ccapAppInstHisIPInCallDiscNormal Unsigned32,
ccapAppInstHisIPInCallDiscUsrErr Unsigned32,
ccapAppInstHisIPInCallDiscSysErr Unsigned32,
-- IP Outgoing Placed Call from Application History Instance
ccapAppInstHisIPOutCallSetupReq Unsigned32,
ccapAppInstHisIPOutCallTotConn Unsigned32,
ccapAppInstHisIPOutCallHandedOut Unsigned32,
ccapAppInstHisIPOutCallHandOutRet Unsigned32,
ccapAppInstHisIPOutCallInHandoff Unsigned32,
ccapAppInstHisIPOutCallInHandoffRet Unsigned32,
ccapAppInstHisIPOutCallDiscNormal Unsigned32,
ccapAppInstHisIPOutCallDiscUsrErr Unsigned32,
ccapAppInstHisIPOutCallDiscSysErr Unsigned32,
-- Application Internal services
ccapAppInstHisPlaceCallAttempts Unsigned32,
ccapAppInstHisPlaceCallSuccess Unsigned32,
ccapAppInstHisPlaceCallFailure Unsigned32,
ccapAppInstHisInHandoffCallback Unsigned32,
ccapAppInstHisInHandoffCallbackRet Unsigned32,
ccapAppInstHisInHandoffNoCallback Unsigned32,
ccapAppInstHisOutHandoffCallback Unsigned32,
ccapAppInstHisOutHandoffCallbackRet Unsigned32,
ccapAppInstHisOutHandoffNoCallback Unsigned32,
ccapAppInstHisOutHandofffailures Unsigned32,
ccapAppInstHisDocumentReadAttempts Unsigned32,
ccapAppInstHisDocumentReadSuccess Unsigned32,
ccapAppInstHisDocumentReadFailures Unsigned32,
ccapAppInstHisDocumentParseErrors Unsigned32,
ccapAppInstHisDocumentWriteAttempts Unsigned32,
ccapAppInstHisDocumentWriteSuccess Unsigned32,
ccapAppInstHisDocumentWriteFailures Unsigned32,
-- Subscriber Interaction/Behaviour services
ccapAppInstHisDTMFAttempts Unsigned32,
ccapAppInstHisDTMFAborted Unsigned32,
ccapAppInstHisDTMFNoMatch Unsigned32,
ccapAppInstHisDTMFNoInput Unsigned32,
ccapAppInstHisDTMFMatch Unsigned32,
ccapAppInstHisDTMFLongPound Unsigned32,
ccapAppInstHisASRAttempts Unsigned32,
ccapAppInstHisASRAborted Unsigned32,
ccapAppInstHisASRNoMatch Unsigned32,
ccapAppInstHisASRNoInput Unsigned32,
ccapAppInstHisASRMatch Unsigned32,
ccapAppInstHisAAAAuthenticateFailure Unsigned32,
ccapAppInstHisAAAAuthenticateSuccess Unsigned32,
ccapAppInstHisAAAAuthorizeFailure Unsigned32,
ccapAppInstHisAAAAuthorizeSuccess Unsigned32,
-- ASNL information pertaining to Applications
ccapAppInstHisASNLSubscriptionsSent Unsigned32,
ccapAppInstHisASNLSubscriptionsSuccess Unsigned32,
ccapAppInstHisASNLSubscriptionsFailed Unsigned32,
ccapAppInstHisASNLNotifReceived Unsigned32,
-- Media Stream information
ccapAppInstHisPromptPlayAttempts Unsigned32,
ccapAppInstHisPromptPlaySuccess Unsigned32,
ccapAppInstHisPromptPlayFailed Unsigned32,
ccapAppInstHisPromptPlayDuration Unsigned32,
ccapAppInstHisRecordingAttempts Unsigned32,
ccapAppInstHisRecordingSuccess Unsigned32,
ccapAppInstHisRecordingFailed Unsigned32,
ccapAppInstHisRecordingDuration Unsigned32,
ccapAppInstHisTTSAttempts Unsigned32,
ccapAppInstHisTTSSuccess Unsigned32,
ccapAppInstHisTTSFailed Unsigned32,
ccapAppInstHistEvtLogging TruthValue
}
ccapAppInstHisIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A monotonically increasing integer for the sole purpose of
indexing application instance disconnection events. When it
reaches the maximum value, an extremely unlikely event,
the agent wraps the value back to 1 and may flush existing
entries."
::= { ccapAppInstanceHistoryEntry 1 }
ccapAppInstHisSessionID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A monotonically increasing integer specifying history
application instance identification. This number is
unique per application gateway. When the counter
reaches the maximum value, the gateway wraps the
value back to 1."
::= { ccapAppInstanceHistoryEntry 2 }
ccapAppInstHisAppName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name-tag as specified in the IOS configuration
for this history application instance."
::= { ccapAppInstanceHistoryEntry 3 }
--
-- PSTN Incoming Call to Application History Instance
--
ccapAppInstHisPSTNInCallSetupInd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup indications received by this
application instance from the PSTN."
::= { ccapAppInstanceHistoryEntry 4 }
ccapAppInstHisPSTNInCallTotConn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs connected by
this application instance."
::= { ccapAppInstanceHistoryEntry 5 }
ccapAppInstHisPSTNInCallHandedOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that are
handed out to another application instance because
of application handoff operation ."
::= { ccapAppInstanceHistoryEntry 6 }
ccapAppInstHisPSTNInCallHandOutRet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that were
handed out with call back to another application,
returned back to this instance."
::= { ccapAppInstanceHistoryEntry 7 }
ccapAppInstHisPSTNInCallInHandoff OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that were
handed to this application instance, with the handoff
operation, performed by another application instance."
::= { ccapAppInstanceHistoryEntry 8 }
ccapAppInstHisPSTNInCallInHandoffRet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of incoming PSTN call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppInstanceHistoryEntry 9 }
ccapAppInstHisPSTNInCallDiscNormal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that
disconnected with 'normal' cause code in this
application instance."
::= { ccapAppInstanceHistoryEntry 10 }
ccapAppInstHisPSTNInCallDiscUsrErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppInstanceHistoryEntry 11 }
ccapAppInstHisPSTNInCallDiscSysErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than 'normal
or user error'."
::= { ccapAppInstanceHistoryEntry 12 }
-- PSTN Outgoing Placed Call from Application History Instance
ccapAppInstHisPSTNOutCallSetupReq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup requests placed out to PSTN
interface, by this application instance."
::= { ccapAppInstanceHistoryEntry 13 }
ccapAppInstHisPSTNOutCallTotConn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of PSTN placed call legs connected to
this application instance."
::= { ccapAppInstanceHistoryEntry 14 }
ccapAppInstHisPSTNOutCallHandedOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that are
handed out to another application instance because of
application handoff operation."
::= { ccapAppInstanceHistoryEntry 15 }
ccapAppInstHisPSTNOutCallHandOutRet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that were
handed out with call back to another application,
returned back to this instance."
::= { ccapAppInstanceHistoryEntry 16 }
ccapAppInstHisPSTNOutCallInHandoff OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that were
handed to this application instance, with the handoff
operation, performed by another application instance."
::= { ccapAppInstanceHistoryEntry 17 }
ccapAppInstHisPSTNOutCallInHandoffRet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of outgoing PSTN call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppInstanceHistoryEntry 18 }
ccapAppInstHisPSTNOutCallDiscNormal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that
disconnected with 'normal' cause code in this
application instance."
::= { ccapAppInstanceHistoryEntry 19 }
ccapAppInstHisPSTNOutCallDiscUsrErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppInstanceHistoryEntry 20 }
ccapAppInstHisPSTNOutCallDiscSysErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppInstanceHistoryEntry 21 }
-- IP Incoming Call to Application History Instance
ccapAppInstHisIPInCallSetupInd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup indications received by this
application instance from the IP interface."
::= { ccapAppInstanceHistoryEntry 22 }
ccapAppInstHisIPInCallTotConn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs connected by
this application instance."
::= { ccapAppInstanceHistoryEntry 23 }
ccapAppInstHisIPInCallHandedOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that are handed
out to another application instance because of
application handoff operation."
::= { ccapAppInstanceHistoryEntry 24 }
ccapAppInstHisIPInCallHandOutRet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that were
handed out with call back to another application,
returned back to this instance."
::= { ccapAppInstanceHistoryEntry 25 }
ccapAppInstHisIPInCallInHandoff OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that were
handed to this application instance, with the handoff
operation, performed by another application instance."
::= { ccapAppInstanceHistoryEntry 26 }
ccapAppInstHisIPInCallInHandoffRet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of incoming IP call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppInstanceHistoryEntry 27 }
ccapAppInstHisIPInCallDiscNormal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that
disconnected with 'normal' cause code in this
application instance."
::= { ccapAppInstanceHistoryEntry 28 }
ccapAppInstHisIPInCallDiscUsrErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppInstanceHistoryEntry 29 }
ccapAppInstHisIPInCallDiscSysErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppInstanceHistoryEntry 30 }
-- IP Outgoing Placed Call from Application Instance
ccapAppInstHisIPOutCallSetupReq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup requests placed out to IP
interface, by this application instance."
::= { ccapAppInstanceHistoryEntry 31 }
ccapAppInstHisIPOutCallTotConn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP placed call legs connected to this
application instance."
::= { ccapAppInstanceHistoryEntry 32 }
ccapAppInstHisIPOutCallHandedOut OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that are
handed out to another application instance because of
application handoff operation."
::= { ccapAppInstanceHistoryEntry 33 }
ccapAppInstHisIPOutCallHandOutRet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that were
handed out with call back to another application,
returned back to this instance."
::= { ccapAppInstanceHistoryEntry 34 }
ccapAppInstHisIPOutCallInHandoff OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that were handed
to this application instance, with the handoff
operation, performed by another application instance."
::= { ccapAppInstanceHistoryEntry 35 }
ccapAppInstHisIPOutCallInHandoffRet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of outgoing IP call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppInstanceHistoryEntry 36 }
ccapAppInstHisIPOutCallDiscNormal OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that
disconnected with 'normal' cause code in this
application instance."
::= { ccapAppInstanceHistoryEntry 37 }
ccapAppInstHisIPOutCallDiscUsrErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppInstanceHistoryEntry 38 }
ccapAppInstHisIPOutCallDiscSysErr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppInstanceHistoryEntry 39 }
-- Application History Instance Internal services
ccapAppInstHisPlaceCallAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of place call attempts performed by this
application instance."
::= { ccapAppInstanceHistoryEntry 40 }
ccapAppInstHisPlaceCallSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of placecall attempts performed
successfully by this application instance."
::= { ccapAppInstanceHistoryEntry 41 }
ccapAppInstHisPlaceCallFailure OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of place call failures seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 42 }
ccapAppInstHisInHandoffCallback OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming handoffs with call back to
this application instance."
::= { ccapAppInstanceHistoryEntry 43 }
ccapAppInstHisInHandoffCallbackRet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of returned incoming handoffs with call
back from this application instance."
::= { ccapAppInstanceHistoryEntry 44 }
ccapAppInstHisInHandoffNoCallback OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming handoffs with no call backs
(blind handoff) received by this application instance."
::= { ccapAppInstanceHistoryEntry 45 }
ccapAppInstHisOutHandoffCallback OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of placed handoffs with call backs
(bridged handoffs) from this application instance."
::= { ccapAppInstanceHistoryEntry 46 }
ccapAppInstHisOutHandoffCallbackRet OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of returned handoffs with callback
(bridged handoffs) to this application instance."
::= { ccapAppInstanceHistoryEntry 47 }
ccapAppInstHisOutHandoffNoCallback OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of placed handoffs with no callback
(blind handoffs) from this application instance."
::= { ccapAppInstanceHistoryEntry 48 }
ccapAppInstHisOutHandofffailures OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing handoff failures seen by
this application instance, while trying to place an
outgoing handoff to another application."
::= { ccapAppInstanceHistoryEntry 49 }
ccapAppInstHisDocumentReadAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document read requests made by this
application instance."
::= { ccapAppInstanceHistoryEntry 50 }
ccapAppInstHisDocumentReadSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document read by the application
instance."
::= { ccapAppInstanceHistoryEntry 51 }
ccapAppInstHisDocumentReadFailures OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document read errors for this
application instance."
::= { ccapAppInstanceHistoryEntry 52 }
ccapAppInstHisDocumentParseErrors OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document parse errors or semantic
errors seen by this application."
::= { ccapAppInstanceHistoryEntry 53 }
ccapAppInstHisDocumentWriteAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document write attempts by this
application instance."
::= { ccapAppInstanceHistoryEntry 54 }
ccapAppInstHisDocumentWriteSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document written successfully by this
application instance."
::= { ccapAppInstanceHistoryEntry 55 }
ccapAppInstHisDocumentWriteFailures OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document write failures for this
application instance."
::= { ccapAppInstanceHistoryEntry 56 }
ccapAppInstHisDTMFAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of attempts to read user DTMF input by
this application instance."
::= { ccapAppInstanceHistoryEntry 57 }
ccapAppInstHisDTMFAborted OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of DTMF reads interrupts/aborts by
this application instance."
::= { ccapAppInstanceHistoryEntry 58 }
ccapAppInstHisDTMFNoMatch OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of DTMF no match events on incorrect
user input, seen by this application instance."
::= { ccapAppInstanceHistoryEntry 59 }
ccapAppInstHisDTMFNoInput OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of user input timeout on DTMF input
seen by this application instance."
::= { ccapAppInstanceHistoryEntry 60 }
ccapAppInstHisDTMFMatch OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of DTMF input matched events seen by
this application instance."
::= { ccapAppInstanceHistoryEntry 61 }
ccapAppInstHisDTMFLongPound OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of 'Long-Pound' user interrupts seen by
this application instance."
::= { ccapAppInstanceHistoryEntry 62 }
ccapAppInstHisASRAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
attempts to read user speech input by this application
instance."
::= { ccapAppInstanceHistoryEntry 63 }
ccapAppInstHisASRAborted OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
read interrupts/aborts by this application instance."
::= { ccapAppInstanceHistoryEntry 64 }
ccapAppInstHisASRNoMatch OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
match events on user speech input, seen by this
application."
::= { ccapAppInstanceHistoryEntry 65 }
ccapAppInstHisASRNoInput OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
user speech input timeout events, seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 66 }
ccapAppInstHisASRMatch OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
user speech input matched events, seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 67 }
ccapAppInstHisAAAAuthenticateFailure OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authenticate failures seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 68 }
ccapAppInstHisAAAAuthenticateSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authenticate success seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 69 }
ccapAppInstHisAAAAuthorizeFailure OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authorize failures seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 70 }
ccapAppInstHisAAAAuthorizeSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authorize success seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 71 }
ccapAppInstHisASNLSubscriptionsSent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscription sent by this
application instance."
::= { ccapAppInstanceHistoryEntry 72 }
ccapAppInstHisASNLSubscriptionsSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscriptions success, seen by
this application instance."
::= { ccapAppInstanceHistoryEntry 73 }
ccapAppInstHisASNLSubscriptionsFailed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscription failures, seen by
this application instance."
::= { ccapAppInstanceHistoryEntry 74 }
ccapAppInstHisASNLNotifReceived OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscriptions received by this
application instance."
::= { ccapAppInstanceHistoryEntry 75 }
ccapAppInstHisPromptPlayAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of prompt play attempts made by this
application instance."
::= { ccapAppInstanceHistoryEntry 76 }
ccapAppInstHisPromptPlaySuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of play prompt success, seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 77 }
ccapAppInstHisPromptPlayFailed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of prompt play failures seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 78 }
ccapAppInstHisPromptPlayDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total duration (in seconds), of all the prompt plays
performed by this application instance."
::= { ccapAppInstanceHistoryEntry 79 }
ccapAppInstHisRecordingAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of record attempts made by this
application instance."
::= { ccapAppInstanceHistoryEntry 80 }
ccapAppInstHisRecordingSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of recording success, seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 81 }
ccapAppInstHisRecordingFailed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of recording failures seen by this
application instance."
::= { ccapAppInstanceHistoryEntry 82 }
ccapAppInstHisRecordingDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total duration (in seconds), of all the recordings
performed by this application instance."
::= { ccapAppInstanceHistoryEntry 83 }
ccapAppInstHisTTSAttempts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TTS (Text-To-Speech) play attempts
made by this application instance."
::= { ccapAppInstanceHistoryEntry 84 }
ccapAppInstHisTTSSuccess OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TTS (Text-To-Speech) play success
seen by this application instance."
::= { ccapAppInstanceHistoryEntry 85 }
ccapAppInstHisTTSFailed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TTS (Text-To-Speech) play failures
seen by this application instance."
::= { ccapAppInstanceHistoryEntry 86 }
ccapAppInstHistEvtLogging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Object by which management station can know if event
logging for this application instance is enabled or
disabled."
::= { ccapAppInstanceHistoryEntry 87 }
--
-- Global Active Gauges for Applications
--
ccapAppGblActCurrentInstances OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of application instances currently active
from all application types of ccapApplicationTable
on this gateway."
::= { ccapAppGblActStat 1 }
ccapAppGblActPSTNInCallNowConn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of PSTN incoming calls connected and
handled by this gateway at this moment."
::= { ccapAppGblActStat 2 }
ccapAppGblActPSTNOutCallNowConn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of PSTN outgoing calls (placed calls to
PSTN) connected and handled by this gateway at this
moment."
::= { ccapAppGblActStat 3 }
ccapAppGblActIPInCallNowConn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP calls connected and
handled by this gateway at this moment."
::= { ccapAppGblActStat 4 }
ccapAppGblActIPOutCallNowConn OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP outgoing (placed to IP) calls
connected and handled by this gateway at this moment."
::= { ccapAppGblActStat 5 }
ccapAppGblActPlaceCallInProgress OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of pending place calls requests from all
the active instances of this gateway."
::= { ccapAppGblActStat 6 }
ccapAppGblActHandoffInProgress OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of pending handoff requests from all
the active instances of this gateway."
::= { ccapAppGblActStat 7 }
ccapAppGblActPromptPlayActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of active prompts for all the active
instances of this gateway."
::= { ccapAppGblActStat 8 }
ccapAppGblActRecordingActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of active recording for all the active
instances of this gateway."
::= { ccapAppGblActStat 9 }
ccapAppGblActTTSActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of active TTS (Text-To-Speech) for all
the active instances of this gateway."
::= { ccapAppGblActStat 10 }
--
-- Global Applications stats configuration
--
ccapAppGblStatsLogging OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the Application Information System
for gathering statistics for all the call application
types on this gateway."
::= { ccapAppGblActStat 11 }
ccapAppGblEventLogging OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the Application Information System
for gathering event-logs for all the call application
type instances on this gateway."
::= { ccapAppGblActStat 12 }
ccapAppGblEvtLogflush OBJECT-TYPE
SYNTAX INTEGER {
ftp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flush the event logs of all the active application
instances to the destination ftp server.
FTP server destination is specified in the IOS
configuration through config CLI. "
::= { ccapAppGblActStat 13 }
ccapAppGblStatsClear OBJECT-TYPE
SYNTAX INTEGER { clear(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Perform clearing of the entire Application History
Global level stats and History Application Type stats."
::= { ccapAppGblActStat 14 }
ccapAppGblLastResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the application information statistics
were last reset, either through CLI or through
ccapAppGblStatsClear object.
When the application information system is disabled on
the gateway, this object is also reset to zeros."
::= { ccapAppGblActStat 15 }
--
-- Global History Counters/Gauges
--
-- PSTN Incoming Call to Global History
ccapAppGblHisTotalInstances OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of application instances handled by
this gateway since last reboot/reset."
::= { ccapAppGblHisStat 1 }
ccapAppGblHisLastReset OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and Time when the counters were last reset
from CLI."
::= { ccapAppGblHisStat 2 }
ccapAppGblHisPSTNInCallSetupInd OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup indications received by this
gateway from the PSTN."
::= { ccapAppGblHisStat 3 }
ccapAppGblHisPSTNInCallTotConn OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs connected by
this gateway."
::= { ccapAppGblHisStat 4 }
ccapAppGblHisPSTNInCallHandedOut OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that are
handed out to another gateway because of application
handoff operation ."
::= { ccapAppGblHisStat 5 }
ccapAppGblHisPSTNInCallHandOutRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that were
handed out with call back to another application,
returned back to this type."
::= { ccapAppGblHisStat 6 }
ccapAppGblHisPSTNInCallInHandoff OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that were
handed to this gateway, with the handoff operation,
performed by another gateway."
::= { ccapAppGblHisStat 7 }
ccapAppGblHisPSTNInCallInHandoffRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of incoming PSTN call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppGblHisStat 8 }
ccapAppGblHisPSTNInCallDiscNormal OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that
disconnected with 'normal' cause code in this gateway."
::= { ccapAppGblHisStat 9 }
ccapAppGblHisPSTNInCallDiscUsrErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppGblHisStat 10 }
ccapAppGblHisPSTNInCallDiscSysErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming PSTN call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppGblHisStat 11 }
-- PSTN Outgoing Placed Call from Applications
ccapAppGblHisPSTNOutCallSetupReq OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup requests placed out to PSTN
interface, by this gateway."
::= { ccapAppGblHisStat 12 }
ccapAppGblHisPSTNOutCallTotConn OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of PSTN placed call legs connected to
this gateway."
::= { ccapAppGblHisStat 13 }
ccapAppGblHisPSTNOutCallHandedOut OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that are
handed out to another gateway because of application
handoff operation."
::= { ccapAppGblHisStat 14 }
ccapAppGblHisPSTNOutCallHandOutRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that were
handed out with call back to another application,
returned back to this type."
::= { ccapAppGblHisStat 15 }
ccapAppGblHisPSTNOutCallInHandoff OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that were
handed to this gateway, with the handoff operation,
performed by another gateway."
::= { ccapAppGblHisStat 16 }
ccapAppGblHisPSTNOutCallInHandoffRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of outgoing PSTN call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppGblHisStat 17 }
ccapAppGblHisPSTNOutCallDiscNormal OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that
disconnected with 'normal' cause code in this gateway."
::= { ccapAppGblHisStat 18 }
ccapAppGblHisPSTNOutCallDiscUsrErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppGblHisStat 19 }
ccapAppGblHisPSTNOutCallDiscSysErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing PSTN call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppGblHisStat 20 }
-- IP Incoming Call to Applications
ccapAppGblHisIPInCallSetupInd OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup indications received by this
gateway from the IP interface."
::= { ccapAppGblHisStat 21 }
ccapAppGblHisIPInCallTotConn OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs connected by
this gateway."
::= { ccapAppGblHisStat 22 }
ccapAppGblHisIPInCallHandedOut OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that are handed
out to another gateway because of application
handoff operation."
::= { ccapAppGblHisStat 23 }
ccapAppGblHisIPInCallHandOutRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that were
handed out with call back to another application,
returned back to this type."
::= { ccapAppGblHisStat 24 }
ccapAppGblHisIPInCallInHandoff OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that were
handed to this gateway, with the handoff operation,
performed by another gateway."
::= { ccapAppGblHisStat 25 }
ccapAppGblHisIPInCallInHandoffRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of incoming IP call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppGblHisStat 26 }
ccapAppGblHisIPInCallDiscNormal OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that
disconnected with 'normal' cause code in this gateway."
::= { ccapAppGblHisStat 27 }
ccapAppGblHisIPInCallDiscUsrErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppGblHisStat 28 }
ccapAppGblHisIPInCallDiscSysErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming IP call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppGblHisStat 29 }
-- IP Outgoing Placed Call from Gateway
ccapAppGblHisIPOutCallSetupReq OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of setup requests placed out to IP
interface, by this gateway."
::= { ccapAppGblHisStat 30 }
ccapAppGblHisIPOutCallTotConn OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of IP placed call legs connected to this
gateway."
::= { ccapAppGblHisStat 31 }
ccapAppGblHisIPOutCallHandedOut OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that are handed
out to another gateway because of application
handoff operation."
::= { ccapAppGblHisStat 32 }
ccapAppGblHisIPOutCallHandOutRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that were
handed out with call back to another application,
returned back."
::= { ccapAppGblHisStat 33 }
ccapAppGblHisIPOutCallInHandoff OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that were
handed to this gateway, with the handoff operation,
performed by another gateway."
::= { ccapAppGblHisStat 34 }
ccapAppGblHisIPOutCallInHandoffRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Total number of outgoing IP call legs returned
back as part of 'completed handoff with call back
operation'."
::= { ccapAppGblHisStat 35 }
ccapAppGblHisIPOutCallDiscNormal OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that
disconnected with 'normal' cause code in this
gateway."
::= { ccapAppGblHisStat 36 }
ccapAppGblHisIPOutCallDiscUsrErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that
disconnected with 'user error' cause code. User error
cause code could be 'no answer/busy/timeout'."
::= { ccapAppGblHisStat 37 }
ccapAppGblHisIPOutCallDiscSysErr OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing IP call legs that
disconnected with 'system error' cause code. System
error cause code could be any thing other than
'normal or user error'."
::= { ccapAppGblHisStat 38 }
-- Application Internal services for all applications on this gateway.
ccapAppGblHisPlaceCallAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of place call attempts performed by this
gateway."
::= { ccapAppGblHisStat 39 }
ccapAppGblHisPlaceCallSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of placecall attempts performed
successfully by this gateway."
::= { ccapAppGblHisStat 40 }
ccapAppGblHisPlaceCallFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of place call failures seen by this
gateway."
::= { ccapAppGblHisStat 41 }
ccapAppGblHisInHandoffCallback OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming handoffs with call back to
this gateway."
::= { ccapAppGblHisStat 42 }
ccapAppGblHisInHandoffCallbackRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of returned incoming handoffs with call
back, from this gateway."
::= { ccapAppGblHisStat 43 }
ccapAppGblHisInHandoffNoCallback OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of incoming handoffs with no call backs
(blind handoffs) received by this gateway."
::= { ccapAppGblHisStat 44 }
ccapAppGblHisOutHandoffCallback OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of placed handoffs with call backs
(bridged handoffs) from this gateway."
::= { ccapAppGblHisStat 45 }
ccapAppGblHisOutHandoffCallbackRet OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of returned handoffs with callback
(bridged handoffs) to this gateway."
::= { ccapAppGblHisStat 46 }
ccapAppGblHisOutHandoffNoCallback OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of placed handoffs with no callback
(blind handoffs) from this gateway."
::= { ccapAppGblHisStat 47 }
ccapAppGblHisOutHandofffailures OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outgoing handoff failures seen by
this gateway, while trying to place an
outgoing handoff to another application."
::= { ccapAppGblHisStat 48 }
ccapAppGblHisDocumentReadAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document read requests made by this
gateway."
::= { ccapAppGblHisStat 49 }
ccapAppGblHisDocumentReadSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document read by the gateway."
::= { ccapAppGblHisStat 50 }
ccapAppGblHisDocumentReadFailures OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document read errors for this
application gateway."
::= { ccapAppGblHisStat 51 }
ccapAppGblHisDocumentParseErrors OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document parse errors or semantic
errors seen by this gateway."
::= { ccapAppGblHisStat 52 }
ccapAppGblHisDocumentWriteAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document write attempts by this
application gateway."
::= { ccapAppGblHisStat 53 }
ccapAppGblHisDocumentWriteSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document written successfully by this
gateway."
::= { ccapAppGblHisStat 54 }
ccapAppGblHisDocumentWriteFailures OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of document write failures for this
gateway."
::= { ccapAppGblHisStat 55 }
ccapAppGblHisDTMFAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of attempts to read user DTMF input by
this gateway."
::= { ccapAppGblHisStat 56 }
ccapAppGblHisDTMFAborted OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of DTMF reads interrupts/aborts by
this gateway."
::= { ccapAppGblHisStat 57 }
ccapAppGblHisDTMFNoMatch OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of DTMF no match events on incorrect
user input, seen by this gateway."
::= { ccapAppGblHisStat 58 }
ccapAppGblHisDTMFNoInput OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of user input timeout on DTMF input
seen by this gateway."
::= { ccapAppGblHisStat 59 }
ccapAppGblHisDTMFMatch OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of DTMF input matched events seen by
this gateway."
::= { ccapAppGblHisStat 60 }
ccapAppGblHisDTMFLongPound OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of 'Long-Pound' user interrupts seen by
this gateway."
::= { ccapAppGblHisStat 61 }
ccapAppGblHisASRAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
attempts to read user speech input by this gateway."
::= { ccapAppGblHisStat 62 }
ccapAppGblHisASRAborted OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
read interrupts/aborts by this gateway."
::= { ccapAppGblHisStat 63 }
ccapAppGblHisASRNoMatch OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
match events on user speech input seen, by this
gateway."
::= { ccapAppGblHisStat 64 }
ccapAppGblHisASRNoInput OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
user speech input timeout events, seen by this
gateway."
::= { ccapAppGblHisStat 65 }
ccapAppGblHisASRMatch OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR (Automatic Speech Recognition)
user speech input matched events, seen by this
gateway."
::= { ccapAppGblHisStat 66 }
ccapAppGblHisAAAAuthenticateFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authenticate failures seen by this
gateway."
::= { ccapAppGblHisStat 67 }
ccapAppGblHisAAAAuthenticateSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authenticate success seen by this
gateway."
::= { ccapAppGblHisStat 68 }
ccapAppGblHisAAAAuthorizeFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authorize failures seen by this
gateway."
::= { ccapAppGblHisStat 69 }
ccapAppGblHisAAAAuthorizeSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA Authorize success seen by this
gateway."
::= { ccapAppGblHisStat 70 }
ccapAppGblHisASNLSubscriptionsSent OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscription sent by this
application type."
::= { ccapAppGblHisStat 71 }
ccapAppGblHisASNLSubscriptionsSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscriptions success, seen by
this application gateway."
::= { ccapAppGblHisStat 72 }
ccapAppGblHisASNLSubscriptionsFailed OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscription failures, seen by
this gateway."
::= { ccapAppGblHisStat 73 }
ccapAppGblHisASNLNotifReceived OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASNL subscriptions received by this
gateway."
::= { ccapAppGblHisStat 74 }
ccapAppGblHisPromptPlayAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of prompt play attempts made by this
gateway."
::= { ccapAppGblHisStat 75 }
ccapAppGblHisPromptPlaySuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of play prompt success, seen by this
gateway."
::= { ccapAppGblHisStat 76 }
ccapAppGblHisPromptPlayFailed OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of prompt play failures seen by this
gateway."
::= { ccapAppGblHisStat 77 }
ccapAppGblHisPromptPlayDuration OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total duration (in seconds), of all the prompt plays
performed by this gateway."
::= { ccapAppGblHisStat 78 }
ccapAppGblHisRecordingAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of record attempts made by this
application gateway."
::= { ccapAppGblHisStat 79 }
ccapAppGblHisRecordingSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of recording success, seen by this
application gateway."
::= { ccapAppGblHisStat 80 }
ccapAppGblHisRecordingFailed OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of recording failures seen by this
application gateway."
::= { ccapAppGblHisStat 81 }
ccapAppGblHisRecordingDuration OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total duration (in seconds), of all the recordings
performed by this gateway."
::= { ccapAppGblHisStat 82 }
ccapAppGblHisTTSAttempts OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TTS (Text-To-Speech) play attempts
made by this gateway."
::= { ccapAppGblHisStat 83 }
ccapAppGblHisTTSSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TTS (Text-To-Speech) play success
seen by this gateway."
::= { ccapAppGblHisStat 84 }
ccapAppGblHisTTSFailed OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TTS (Text-To-Speech) play failures
seen by this gateway."
::= { ccapAppGblHisStat 85 }
--
-- Application Interface system configuration
--
ccapAppIntfGblStatsLogging OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/ disable the Application Interface Information
System to gather statistics for all the application
interface types on this gateway. Call application
interface types are AAA, ASR, Flash, HTTP, SMTP, RAM,
RTSP, TFTP, TTS."
::= { ccapAppIntf 1 }
ccapAppIntfGblEventLogging OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable the Application Interface Information
System to gather event-logs for all the call
application interface types on this gateway. Call
application interface types are AAA, ASR, Flash, HTTP,
SMTP, RAM, RTSP, TFTP and TTS."
::= { ccapAppIntf 2 }
ccapAppIntfGblEvtLogFlush OBJECT-TYPE
SYNTAX INTEGER { ftp(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Flush the application interface event logs from all
the call application interfaces to the destination
ftp server.
FTP server destination is specified in the IOS
configuration through config Command Line Interface."
::= { ccapAppIntf 3 }
ccapAppIntfGblStatsClear OBJECT-TYPE
SYNTAX INTEGER {
clearStats(1),
clearEventlog(2),
clear(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Perform resetting of the entire Application Interface
stats and/or evtlogs for all the interface types and
all the associated servers records. Server records
are not purged."
::= { ccapAppIntf 4 }
ccapAppIntfGblLastResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the application interface information
statistics were last reset, either through CLI or
through ccapAppIntfGblStatsClear object.
When the application interface information system is
disabled on the gateway, this object is also reset to
zeros."
::= { ccapAppIntf 5 }
--
-- Application Interface to HTTP
--
ccapAppIntfHTTPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcapAppIntfHTTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about last N most active HTTP unique servers
accessed from a call application gateway."
::= { ccapAppIntf 8 }
ccapAppIntfHTTPEntry OBJECT-TYPE
SYNTAX CcapAppIntfHTTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a HTTP server interface to an application.
When applicaiton gateway instances access an external HTTP
server, a record entry is created for that server.
If a maximum number of servers is reached, then oldest accessed
server record is purged. Maximum number of server records to
retain is configured through IOS CLI."
INDEX { IMPLIED ccapAppIntfHTTPServer }
::= { ccapAppIntfHTTPTable 1 }
CcapAppIntfHTTPEntry ::= SEQUENCE {
ccapAppIntfHTTPServer ServerNameString,
ccapAppIntfHTTPStats INTEGER,
ccapAppIntfHTTPEvtLog INTEGER,
ccapAppIntfHTTPGetRequest ZeroBasedCounter32,
ccapAppIntfHTTPGetSuccess ZeroBasedCounter32,
ccapAppIntfHTTPGetFailure ZeroBasedCounter32,
ccapAppIntfHTTPPostRequest ZeroBasedCounter32,
ccapAppIntfHTTPPostSuccess ZeroBasedCounter32,
ccapAppIntfHTTPPostFailure ZeroBasedCounter32,
ccapAppIntfHTTPTxBytes ZeroBasedCounter32,
ccapAppIntfHTTPRxBytes ZeroBasedCounter32,
ccapAppIntfHTTPMinXferRate ZeroBasedCounter32,
ccapAppIntfHTTPMaxXferRate ZeroBasedCounter32,
ccapAppIntfHTTPAvgXferRate ZeroBasedCounter32,
ccapAppIntfHTTPLastResetTime TimeStamp
}
ccapAppIntfHTTPServer OBJECT-TYPE
SYNTAX ServerNameString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name or IP address of this HTTP server."
::= { ccapAppIntfHTTPEntry 1 }
ccapAppIntfHTTPStats OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Interface Information System for gathering statistics
for this HTTP server."
::= { ccapAppIntfHTTPEntry 2 }
ccapAppIntfHTTPEvtLog OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Information System for gathering event-logs for this
HTTP server."
::= { ccapAppIntfHTTPEntry 3 }
ccapAppIntfHTTPGetRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of HTTP GET requests sent by call
applications to this HTTP server."
::= { ccapAppIntfHTTPEntry 4 }
ccapAppIntfHTTPGetSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful HTTP GET transactions
done from call applications to this HTTP server."
::= { ccapAppIntfHTTPEntry 5 }
ccapAppIntfHTTPGetFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed HTTP GET transactions
from call applications to this HTTP server."
::= { ccapAppIntfHTTPEntry 6 }
ccapAppIntfHTTPPostRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of HTTP POST requests sent by call
applications to this HTTP server."
::= { ccapAppIntfHTTPEntry 7 }
ccapAppIntfHTTPPostSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful HTTP POST transactions
done from call applications to this HTTP server."
::= { ccapAppIntfHTTPEntry 8 }
ccapAppIntfHTTPPostFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed HTTP POST transactions
from call applications to this HTTP server."
::= { ccapAppIntfHTTPEntry 9 }
ccapAppIntfHTTPTxBytes OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number KiloBytes sent from call applications to
this HTTP server, since last reset."
::= { ccapAppIntfHTTPEntry 10 }
ccapAppIntfHTTPRxBytes OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of KiloBytes received to call
applications from this HTTP server, since last reset."
::= { ccapAppIntfHTTPEntry 11 }
ccapAppIntfHTTPMinXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum transfer rate of all the transactions between
call applications and this HTTP server, from the last
reset."
::= { ccapAppIntfHTTPEntry 12 }
ccapAppIntfHTTPMaxXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum transfer rate of all the transactions between
call applications and this HTTP server, from the last
reset."
::= { ccapAppIntfHTTPEntry 13 }
ccapAppIntfHTTPAvgXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average transfer rate between call applications and
this HTTP server. This is a running average of the
last ten transactions or from the last reset if
transaction count is less than ten."
::= { ccapAppIntfHTTPEntry 14 }
ccapAppIntfHTTPLastResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the application information statistics
were last reset, either through CLI or through
ccapAppGblStatsClear object for this HTTP server.
When the application information system is disabled
on the gateway, this object is also reset to zeros."
::= { ccapAppIntfHTTPEntry 15 }
--
-- Application Interface to RTSP
--
ccapAppIntfRTSPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcapAppIntfRTSPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about last N most active RTSP unique servers
accessed from a call application gateway."
::= { ccapAppIntf 9 }
ccapAppIntfRTSPEntry OBJECT-TYPE
SYNTAX CcapAppIntfRTSPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a RTSP server interface to an application.
When applicaiton gateway instances access an external RTSP
server, a record entry is created for that server. If a
maximum number of server records has reached, then oldest
accessed server record is purged. Maximum number of server
records to retain is configured through IOS CLI."
INDEX { IMPLIED ccapAppIntfRTSPServer }
::= { ccapAppIntfRTSPTable 1 }
CcapAppIntfRTSPEntry ::= SEQUENCE {
ccapAppIntfRTSPServer ServerNameString,
ccapAppIntfRTSPStats INTEGER,
ccapAppIntfRTSPEvtLog INTEGER,
ccapAppIntfRTSPReadRequest ZeroBasedCounter32,
ccapAppIntfRTSPReadSuccess ZeroBasedCounter32,
ccapAppIntfRTSPReadFailure ZeroBasedCounter32,
ccapAppIntfRTSPWriteRequest ZeroBasedCounter32,
ccapAppIntfRTSPWriteSuccess ZeroBasedCounter32,
ccapAppIntfRTSPWriteFailure ZeroBasedCounter32,
ccapAppIntfRTSPTxBytes ZeroBasedCounter32,
ccapAppIntfRTSPRxBytes ZeroBasedCounter32,
ccapAppIntfRTSPMinXferRate ZeroBasedCounter32,
ccapAppIntfRTSPMaxXferRate ZeroBasedCounter32,
ccapAppIntfRTSPAvgXferRate ZeroBasedCounter32,
ccapAppIntfRTSPLastResetTime TimeStamp
}
ccapAppIntfRTSPServer OBJECT-TYPE
SYNTAX ServerNameString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name or IP address of this RTSP server."
::= { ccapAppIntfRTSPEntry 1 }
ccapAppIntfRTSPStats OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Interface Information System for gathering statistics
for this RTSP server."
::= { ccapAppIntfRTSPEntry 2 }
ccapAppIntfRTSPEvtLog OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Information System for gathering event-logs for this
RTSP server."
::= { ccapAppIntfRTSPEntry 3 }
ccapAppIntfRTSPReadRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of RTSP read requests sent by call
applications to this RTSP server."
::= { ccapAppIntfRTSPEntry 4 }
ccapAppIntfRTSPReadSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful RTSP read transactions
done from call applications to this RTSP server."
::= { ccapAppIntfRTSPEntry 5 }
ccapAppIntfRTSPReadFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed RTSP read transactions
from call applications to this RTSP server."
::= { ccapAppIntfRTSPEntry 6 }
ccapAppIntfRTSPWriteRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of RTSP write requests sent by call
applications to this RTSP server."
::= { ccapAppIntfRTSPEntry 7 }
ccapAppIntfRTSPWriteSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful RTSP write transactions
done from call applications to this RTSP server."
::= { ccapAppIntfRTSPEntry 8 }
ccapAppIntfRTSPWriteFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed RTSP write transactions
from call applications to this RTSP server."
::= { ccapAppIntfRTSPEntry 9 }
ccapAppIntfRTSPTxBytes OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number KiloBytes sent from call applications to
this RTSP server, since last reset."
::= { ccapAppIntfRTSPEntry 10 }
ccapAppIntfRTSPRxBytes OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of KiloBytes received to call
applications from this RTSP server, since last reset."
::= { ccapAppIntfRTSPEntry 11 }
ccapAppIntfRTSPMinXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum transfer rate of all the transactions between
call applications and this RTSP server, from last
reset."
::= { ccapAppIntfRTSPEntry 12 }
ccapAppIntfRTSPMaxXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum transfer rate of all the transactions between
call applications and this RTSP server, from the last
reset."
::= { ccapAppIntfRTSPEntry 13 }
ccapAppIntfRTSPAvgXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average transfer rate between call applications and
this RTSP server. This is a running average of the
last ten transactions or from the last reset if
transaction count is less than ten."
::= { ccapAppIntfRTSPEntry 14 }
ccapAppIntfRTSPLastResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the application information statistics
were last reset, either through CLI or through
ccapAppGblStatsClear object for this RTSP server.
When the application information system is disabled on
gateway, this object is also reset to zeros."
::= { ccapAppIntfRTSPEntry 15 }
--
-- Application Interface to TFTP
--
ccapAppIntfTFTPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcapAppIntfTFTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about last N most active TFTP unique servers
accessed from a call application gateway."
::= { ccapAppIntf 10 }
ccapAppIntfTFTPEntry OBJECT-TYPE
SYNTAX CcapAppIntfTFTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a TFTP server interface to a application.
When applicaiton gateway instances access an external TFTP
server, a record entry is created for that server. If a maximum
number of server is reached, then oldest accessed server record
is purged. Maximum number of server records to retain is
configured through IOS CLI."
INDEX { IMPLIED ccapAppIntfTFTPServer }
::= { ccapAppIntfTFTPTable 1 }
CcapAppIntfTFTPEntry ::= SEQUENCE {
ccapAppIntfTFTPServer ServerNameString,
ccapAppIntfTFTPStats INTEGER,
ccapAppIntfTFTPEvtLog INTEGER,
ccapAppIntfTFTPReadRequest ZeroBasedCounter32,
ccapAppIntfTFTPReadSuccess ZeroBasedCounter32,
ccapAppIntfTFTPReadFailure ZeroBasedCounter32,
ccapAppIntfTFTPWriteRequest ZeroBasedCounter32,
ccapAppIntfTFTPWriteSuccess ZeroBasedCounter32,
ccapAppIntfTFTPWriteFailure ZeroBasedCounter32,
ccapAppIntfTFTPTxBytes ZeroBasedCounter32,
ccapAppIntfTFTPRxBytes ZeroBasedCounter32,
ccapAppIntfTFTPMinXferRate ZeroBasedCounter32,
ccapAppIntfTFTPMaxXferRate ZeroBasedCounter32,
ccapAppIntfTFTPAvgXferRate ZeroBasedCounter32,
ccapAppIntfTFTPLastResetTime TimeStamp
}
ccapAppIntfTFTPServer OBJECT-TYPE
SYNTAX ServerNameString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name or IP address of this TFTP server."
::= { ccapAppIntfTFTPEntry 1 }
ccapAppIntfTFTPStats OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Interface Information System for gathering statistics
for this TFTP server."
::= { ccapAppIntfTFTPEntry 2 }
ccapAppIntfTFTPEvtLog OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Information System for gathering event-logs for this
TFTP server."
::= { ccapAppIntfTFTPEntry 3 }
ccapAppIntfTFTPReadRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TFTP read requests sent by call
applications to this TFTP server."
::= { ccapAppIntfTFTPEntry 4 }
ccapAppIntfTFTPReadSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful TFTP read transactions
done from call applications to this TFTP server."
::= { ccapAppIntfTFTPEntry 5 }
ccapAppIntfTFTPReadFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed TFTP read transactions
from call applications to this TFTP server."
::= { ccapAppIntfTFTPEntry 6 }
ccapAppIntfTFTPWriteRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TFTP write requests sent by call
applications to this TFTP server."
::= { ccapAppIntfTFTPEntry 7 }
ccapAppIntfTFTPWriteSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful TFTP write transactions
done from call applications to this TFTP server."
::= { ccapAppIntfTFTPEntry 8 }
ccapAppIntfTFTPWriteFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed TFTP write transactions
from call applications to this TFTP server."
::= { ccapAppIntfTFTPEntry 9 }
ccapAppIntfTFTPTxBytes OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number KiloBytes sent from call applications to
this TFTP server, since last reset."
::= { ccapAppIntfTFTPEntry 10 }
ccapAppIntfTFTPRxBytes OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of KiloBytes received to call
applications from this TFTP server, since last reset."
::= { ccapAppIntfTFTPEntry 11 }
ccapAppIntfTFTPMinXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum transfer rate of all the transactions between
call applications and this TFTP server, from the last
reset."
::= { ccapAppIntfTFTPEntry 12 }
ccapAppIntfTFTPMaxXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum transfer rate of all the transactions between
call applications and this TFTP server, from the last
reset."
::= { ccapAppIntfTFTPEntry 13 }
ccapAppIntfTFTPAvgXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average transfer rate between call applications and
this TFTP server. This is a running average of the
last ten transactions or from the last reset if
transaction count is less than ten."
::= { ccapAppIntfTFTPEntry 14 }
ccapAppIntfTFTPLastResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the application information statistics
were last reset, either through CLI or through
ccapAppGblStatsClear object for this TFTP server.
When the application information system is disabled
on the gateway, this object is also reset to zeros."
::= { ccapAppIntfTFTPEntry 15 }
--
-- Appliation Interface to Flash File system
--
ccapAppIntfFlashReadRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of Flash read requests sent by call
applications to flash file system on this gateway."
::= { ccapAppIntf 11 }
ccapAppIntfFlashReadSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful flash file read
transactions done from call applications on this
gateway."
::= { ccapAppIntf 12 }
ccapAppIntfFlashReadFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed flash read transactions
from call applications on this gateway."
::= { ccapAppIntf 13 }
--
-- Appliation Interface of Recording to RAM.
--
ccapAppIntfRAMRecordReadRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of RAM recording read requests sent by
call applications on this gateway."
::= { ccapAppIntf 14 }
ccapAppIntfRAMRecordReadSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful RAM recording read
transactions done from call applications on this
gateway."
::= { ccapAppIntf 15 }
ccapAppIntfRAMRecordiongReadFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of RAM recording read transactions
failures from call applications on this gateway."
::= { ccapAppIntf 16 }
ccapAppIntfRAMRecordRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of RAM recording requests sent by call
applications on this gateway."
::= { ccapAppIntf 17 }
ccapAppIntfRAMRecordSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful RAM recordings done from
call applications on this gateway."
::= { ccapAppIntf 18 }
ccapAppIntfRAMRecordiongFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of RAM recording failures from call
applications on this gateway."
::= { ccapAppIntf 19 }
--
-- Application Interface to SMTP
--
ccapAppIntfSMTPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcapAppIntfSMTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about last N most active SMTP unique servers
accessed from a call application gateway.
When applicaiton gateway instances access an external SMTP
server, a record entry is created for that server. If a maximum
number of server record has reached, then the oldest accessed
server record is purged. Maximum number of server records to
retain is configured through IOS CLI."
::= { ccapAppIntf 20 }
ccapAppIntfSMTPEntry OBJECT-TYPE
SYNTAX CcapAppIntfSMTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a SMTP server interface to an
application."
INDEX { IMPLIED ccapAppIntfSMTPServer }
::= { ccapAppIntfSMTPTable 1 }
CcapAppIntfSMTPEntry ::= SEQUENCE {
ccapAppIntfSMTPServer ServerNameString,
ccapAppIntfSMTPStats INTEGER,
ccapAppIntfSMTPEvtLog INTEGER,
ccapAppIntfSMTPReadRequest ZeroBasedCounter32,
ccapAppIntfSMTPReadSuccess ZeroBasedCounter32,
ccapAppIntfSMTPReadFailure ZeroBasedCounter32,
ccapAppIntfSMTPWriteRequest ZeroBasedCounter32,
ccapAppIntfSMTPWriteSuccess ZeroBasedCounter32,
ccapAppIntfSMTPWriteFailure ZeroBasedCounter32,
ccapAppIntfSMTPTxBytes ZeroBasedCounter32,
ccapAppIntfSMTPRxBytes ZeroBasedCounter32,
ccapAppIntfSMTPMinXferRate ZeroBasedCounter32,
ccapAppIntfSMTPMaxXferRate ZeroBasedCounter32,
ccapAppIntfSMTPAvgXferRate ZeroBasedCounter32,
ccapAppIntfSMTPLastResetTime TimeStamp
}
ccapAppIntfSMTPServer OBJECT-TYPE
SYNTAX ServerNameString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name or IP address of this SMTP server."
::= { ccapAppIntfSMTPEntry 1 }
ccapAppIntfSMTPStats OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Interface Information System for gathering statistics
for this SMTP server."
::= { ccapAppIntfSMTPEntry 2 }
ccapAppIntfSMTPEvtLog OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Information System for gathering event-logs for this
SMTP server."
::= { ccapAppIntfSMTPEntry 3 }
ccapAppIntfSMTPReadRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of SMTP read requests sent by call
applications to this SMTP server."
::= { ccapAppIntfSMTPEntry 4 }
ccapAppIntfSMTPReadSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful SMTP read transactions
done from call applications to this SMTP server."
::= { ccapAppIntfSMTPEntry 5 }
ccapAppIntfSMTPReadFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed SMTP read transactions
from call applications to this SMTP server."
::= { ccapAppIntfSMTPEntry 6 }
ccapAppIntfSMTPWriteRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of SMTP write requests sent by call
applications to this SMTP server."
::= { ccapAppIntfSMTPEntry 7 }
ccapAppIntfSMTPWriteSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful SMTP write transactions
done from call applications to this SMTP server."
::= { ccapAppIntfSMTPEntry 8 }
ccapAppIntfSMTPWriteFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed SMTP write transactions
from call applications to this SMTP server."
::= { ccapAppIntfSMTPEntry 9 }
ccapAppIntfSMTPTxBytes OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number KiloBytes sent from call applications to
this SMTP server, since last reset."
::= { ccapAppIntfSMTPEntry 10 }
ccapAppIntfSMTPRxBytes OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of KiloBytes received to call
applications from this SMTP server, since last reset."
::= { ccapAppIntfSMTPEntry 11 }
ccapAppIntfSMTPMinXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum transfer rate of all the transactions between
call applications and this SMTP server, from the last
reset."
::= { ccapAppIntfSMTPEntry 12 }
ccapAppIntfSMTPMaxXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum transfer rate of all the transactions between
call applications and this SMTP server, from the last
reset."
::= { ccapAppIntfSMTPEntry 13 }
ccapAppIntfSMTPAvgXferRate OBJECT-TYPE
SYNTAX ZeroBasedCounter32
UNITS "KBytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average transfer rate between call applications and
this SMTP server. This is a running average of the
last ten transactions or from the last reset if
transaction count is less than ten."
::= { ccapAppIntfSMTPEntry 14 }
ccapAppIntfSMTPLastResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the application information statistics
were last reset, either through CLI or through
ccapAppGblStatsClear object for this SMTP server.
When the application information system is disabled on
gateway, this object is also reset to zeros."
::= { ccapAppIntfSMTPEntry 15 }
--
-- Appliation Interface to AAA method lists
--
ccapAppIntfAAAMethodListTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcapAppIntfAAAMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about last N most active AAA method lists
accessed from a call application gateway.
When applicaiton gateway instances access AAA method list,
a record entry is created for that method list. If a maximum
number of server is reached, then oldest accessed method list
record is purged. Maximum number of method list records to
retain is configured through IOS CLI."
::= { ccapAppIntf 21 }
ccapAppIntfAAAMethodListEntry OBJECT-TYPE
SYNTAX CcapAppIntfAAAMethodListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an AAA method list interface to an
call application."
INDEX { IMPLIED ccapAppIntfAAAMethodListServer }
::= { ccapAppIntfAAAMethodListTable 1 }
CcapAppIntfAAAMethodListEntry ::= SEQUENCE {
ccapAppIntfAAAMethodListServer SnmpAdminString,
ccapAppIntfAAAMethodListStats INTEGER,
ccapAppIntfAAAMethodListEvtLog INTEGER,
ccapAppIntfAAAMethodListReadRequest ZeroBasedCounter32,
ccapAppIntfAAAMethodListReadSuccess ZeroBasedCounter32,
ccapAppIntfAAAMethodListReadFailure ZeroBasedCounter32,
ccapAppIntfAAAMethodListLastResetTime TimeStamp
}
ccapAppIntfAAAMethodListServer OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..40))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of this configured AAA method list."
::= { ccapAppIntfAAAMethodListEntry 1 }
ccapAppIntfAAAMethodListStats OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Interface Information System for gathering statistics
for this AAA method list."
::= { ccapAppIntfAAAMethodListEntry 2 }
ccapAppIntfAAAMethodListEvtLog OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Information System for gathering event-logs for this
AAA method list."
::= { ccapAppIntfAAAMethodListEntry 3 }
ccapAppIntfAAAMethodListReadRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of AAA method list read requests sent by
call applications to configured AAA method list on this
gateway."
::= { ccapAppIntfAAAMethodListEntry 4 }
ccapAppIntfAAAMethodListReadSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful AAA method lists
transactions done from call applications on this
gateway."
::= { ccapAppIntfAAAMethodListEntry 5 }
ccapAppIntfAAAMethodListReadFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed AAA method lists transactions
from call applications on this gateway. This object
does not include the AAA rejects by the servers. It
indicates failures due to this gateway and AAA server
issues."
::= { ccapAppIntfAAAMethodListEntry 6 }
ccapAppIntfAAAMethodListLastResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the application information statistics
were last reset, either through CLI or through
ccapAppGblStatsClear object for this AAA method
list.
When the application information system is disabled on
gateway, this object is also reset to zeros."
::= { ccapAppIntfAAAMethodListEntry 7 }
--
-- Appliation Interface to ASR
--
ccapAppIntfASRTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcapAppIntfASREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about last N most active ASR
(Automatic Speech Recognition ) unique servers accessed
from a call application gateway.
When applicaiton gateway instances access an external ASR
server, a record entry is created for that server. If a
maximum number of server records has reached, then the
oldest accessed server record is purged. Maximum number of
server records to retain is configured through IOS CLI."
::= { ccapAppIntf 22 }
ccapAppIntfASREntry OBJECT-TYPE
SYNTAX CcapAppIntfASREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an ASR server interface to an
call application."
INDEX { IMPLIED ccapAppIntfASRServer }
::= { ccapAppIntfASRTable 1 }
CcapAppIntfASREntry ::= SEQUENCE {
ccapAppIntfASRServer ServerNameString,
ccapAppIntfASRStats INTEGER,
ccapAppIntfASREvtLog INTEGER,
ccapAppIntfASRReadRequest ZeroBasedCounter32,
ccapAppIntfASRReadSuccess ZeroBasedCounter32,
ccapAppIntfASRReadFailure ZeroBasedCounter32,
ccapAppIntfASRLastResetTime TimeStamp
}
ccapAppIntfASRServer OBJECT-TYPE
SYNTAX ServerNameString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name or IP address of this ASR server."
::= { ccapAppIntfASREntry 1 }
ccapAppIntfASRStats OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Interface Information System for gathering statistics
for this ASR server."
::= { ccapAppIntfASREntry 2 }
ccapAppIntfASREvtLog OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Information System for gathering event-logs for
this ASR server."
::= { ccapAppIntfASREntry 3 }
ccapAppIntfASRReadRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of ASR read requests sent by call
applications to this ASR server from this gateway."
::= { ccapAppIntfASREntry 4 }
ccapAppIntfASRReadSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful ASR transactions done
from call applications on this gateway to this ASR
server."
::= { ccapAppIntfASREntry 5 }
ccapAppIntfASRReadFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed ASR attempts transactions
from call applications to this ASR server."
::= { ccapAppIntfASREntry 6 }
ccapAppIntfASRLastResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the application information statistics
were last reset, either through CLI or through
ccapAppGblStatsClear object for this ASR server.
When the application information system is disabled on
the gateway, this object is also reset to zeros."
::= { ccapAppIntfASREntry 7 }
--
-- Appliation Interface to TTS
--
ccapAppIntfTTSTable OBJECT-TYPE
SYNTAX SEQUENCE OF CcapAppIntfTTSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about last N most active TTS
(Automatic Speech Recognition ) unique servers accessed
from a call application gateway.
When applicaiton gateway instances access an external TTS
server, a record entry is created for that server. If maximum
number of server records has reached, then oldest accessed
server record is purged. Maximum number of server records to
retain is configured through IOS CLI."
::= { ccapAppIntf 23 }
ccapAppIntfTTSEntry OBJECT-TYPE
SYNTAX CcapAppIntfTTSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an TTS server interface to a
call application."
INDEX { IMPLIED ccapAppIntfTTSServer }
::= { ccapAppIntfTTSTable 1 }
CcapAppIntfTTSEntry ::= SEQUENCE {
ccapAppIntfTTSServer ServerNameString,
ccapAppIntfTTSStats INTEGER,
ccapAppIntfTTSEvtLog INTEGER,
ccapAppIntfTTSReadRequest ZeroBasedCounter32,
ccapAppIntfTTSReadSuccess ZeroBasedCounter32,
ccapAppIntfTTSReadFailure ZeroBasedCounter32,
ccapAppIntfTTSLastResetTime TimeStamp
}
ccapAppIntfTTSServer OBJECT-TYPE
SYNTAX ServerNameString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name or IP address of this TTS server."
::= { ccapAppIntfTTSEntry 1 }
ccapAppIntfTTSStats OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Interface Information System for gathering statistics
for this TTS server."
::= { ccapAppIntfTTSEntry 2 }
ccapAppIntfTTSEvtLog OBJECT-TYPE
SYNTAX INTEGER { disable(1), enable(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"To display the current configuration of Application
Information System for gathering event-logs for this
TTS server."
::= { ccapAppIntfTTSEntry 3 }
ccapAppIntfTTSReadRequest OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of TTS read requests sent by call
applications to this TTS server from this gateway."
::= { ccapAppIntfTTSEntry 4 }
ccapAppIntfTTSReadSuccess OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of successful TTS transactions done
from call applications on this gateway to this TTS
server."
::= { ccapAppIntfTTSEntry 5 }
ccapAppIntfTTSReadFailure OBJECT-TYPE
SYNTAX ZeroBasedCounter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of failed TTS attempts transactions
from call applications to this TTS server."
::= { ccapAppIntfTTSEntry 6 }
ccapAppIntfTTSLastResetTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the application information statistics
were last reset, either through CLI or through
ccapAppGblStatsClear object for this TTS server.
When the application information system is disabled on
the gateway, this object is also reset to zeros."
::= { ccapAppIntfTTSEntry 7 }
-- Compliance Statements
ciscoCallApplicationMIBConformance OBJECT IDENTIFIER ::=
{ ciscoCallApplicationMIB 3 }
ciscoCallApplicationMIBCompliances OBJECT IDENTIFIER ::=
{ ciscoCallApplicationMIBConformance 1 }
ciscoCallApplicationMIBGroups OBJECT IDENTIFIER ::=
{ ciscoCallApplicationMIBConformance 2 }
ciscoCallApplicationMIBCompliance MODULE-COMPLIANCE
STATUS deprecated -- superceded by
-- ciscoCallApplicationMIBComplianceRev1
DESCRIPTION
"The compliance statement for Cisco agents which
implement the CISCO-CALL-APPLICATION-MIB."
MODULE
MANDATORY-GROUPS { ccapGeneralCfgGroup
}
::= {ciscoCallApplicationMIBCompliances 1 }
ciscoCallApplicationMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Cisco agents which
implement the CISCO-CALL-APPLICATION-MIB."
MODULE
MANDATORY-GROUPS { ccapGeneralCfgGroupRev1,
ccapAppTypeHistoryGroup,
ccapAppInstanceHistoryGroup,
ccapAppGblActGroup,
ccapAppGblCfgGroup,
ccapAppGblHisGroup,
ccapAppIntfGblCfgGroup,
ccapAppIntfHTTPGroup,
ccapAppIntfRTSPGroup,
ccapAppIntfTFTPGroup,
ccapAppIntfSMTPGroup,
ccapAppIntfAAAMethodListGroup,
ccapAppIntfASRGroup,
ccapAppIntfTTSGroup,
ccapAppIntfFlashGroup,
ccapAppIntfRAMRecordGroup
}
::= { ciscoCallApplicationMIBCompliances 2 }
-- units of conformance
ccapGeneralCfgGroup OBJECT-GROUP
OBJECTS {
ccapAppLocation,
ccapAppLoadState,
ccapAppLoadFailReason,
ccapAppDescr,
ccapAppCallType,
ccapAppRowStatus
}
STATUS deprecated -- superceded by ccapGeneralCfgGroupRev1
DESCRIPTION
"A collection of objects for general configuration of
call applications."
::= { ciscoCallApplicationMIBGroups 1 }
ccapGeneralCfgGroupRev1 OBJECT-GROUP
OBJECTS {
ccapAppLocation,
ccapAppLoadState,
ccapAppLoadFailReason,
ccapAppDescr,
ccapAppCallType,
ccapAppRowStatus,
ccapAppActiveInstances,
ccapAppEventLogging,
ccapAppPSTNInCallNowConn,
ccapAppPSTNOutCallNowConn,
ccapAppIPInCallNowConn,
ccapAppIPOutCallNowConn,
ccapAppPlaceCallInProgress,
ccapAppHandoffInProgress,
ccapAppPromptPlayActive,
ccapAppRecordingActive,
ccapAppTTSActive
}
STATUS current
DESCRIPTION
"A collection of objects for general configuration of
call applications and to display current activity of
applications."
::= { ciscoCallApplicationMIBGroups 2 }
ccapAppTypeHistoryGroup OBJECT-GROUP
OBJECTS {
ccapAppTypeHisEvtLogging,
ccapAppTypeHisLastResetTime,
ccapAppTypeHisPSTNInCallSetupInd,
ccapAppTypeHisPSTNInCallTotConn,
ccapAppTypeHisPSTNInCallHandedOut,
ccapAppTypeHisPSTNInCallHandOutRet,
ccapAppTypeHisPSTNInCallInHandoff,
ccapAppTypeHisPSTNInCallInHandoffRet,
ccapAppTypeHisPSTNInCallDiscNormal,
ccapAppTypeHisPSTNInCallDiscUsrErr,
ccapAppTypeHisPSTNInCallDiscSysErr,
ccapAppTypeHisPSTNOutCallSetupReq,
ccapAppTypeHisPSTNOutCallTotConn,
ccapAppTypeHisPSTNOutCallHandedOut,
ccapAppTypeHisPSTNOutCallHandOutRet,
ccapAppTypeHisPSTNOutCallInHandoff,
ccapAppTypeHisPSTNOutCallInHandoffRet,
ccapAppTypeHisPSTNOutCallDiscNormal,
ccapAppTypeHisPSTNOutCallDiscUsrErr,
ccapAppTypeHisPSTNOutCallDiscSysErr,
ccapAppTypeHisIPInCallSetupInd,
ccapAppTypeHisIPInCallTotConn,
ccapAppTypeHisIPInCallHandedOut,
ccapAppTypeHisIPInCallHandOutRet,
ccapAppTypeHisIPInCallInHandoff,
ccapAppTypeHisIPInCallInHandoffRet,
ccapAppTypeHisIPInCallDiscNormal,
ccapAppTypeHisIPInCallDiscUsrErr,
ccapAppTypeHisIPInCallDiscSysErr,
ccapAppTypeHisIPOutCallSetupReq,
ccapAppTypeHisIPOutCallTotConn,
ccapAppTypeHisIPOutCallHandedOut,
ccapAppTypeHisIPOutCallHandOutRet,
ccapAppTypeHisIPOutCallInHandoff,
ccapAppTypeHisIPOutCallInHandoffRet,
ccapAppTypeHisIPOutCallDiscNormal,
ccapAppTypeHisIPOutCallDiscUsrErr,
ccapAppTypeHisIPOutCallDiscSysErr,
ccapAppTypeHisPlaceCallAttempts,
ccapAppTypeHisPlaceCallSuccess,
ccapAppTypeHisPlaceCallFailure,
ccapAppTypeHisInHandoffCallback,
ccapAppTypeHisInHandoffCallbackRet,
ccapAppTypeHisInHandoffNoCallback,
ccapAppTypeHisOutHandoffCallback,
ccapAppTypeHisOutHandoffCallbackRet,
ccapAppTypeHisOutHandoffNoCallback,
ccapAppTypeHisOutHandofffailures,
ccapAppTypeHisDocumentReadAttempts,
ccapAppTypeHisDocumentReadSuccess,
ccapAppTypeHisDocumentReadFailures,
ccapAppTypeHisDocumentParseErrors,
ccapAppTypeHisDocumentWriteAttempts,
ccapAppTypeHisDocumentWriteSuccess,
ccapAppTypeHisDocumentWriteFailures,
ccapAppTypeHisDTMFAttempts,
ccapAppTypeHisDTMFAborted,
ccapAppTypeHisDTMFNoMatch,
ccapAppTypeHisDTMFNoInput,
ccapAppTypeHisDTMFMatch,
ccapAppTypeHisDTMFLongPound,
ccapAppTypeHisASRAttempts,
ccapAppTypeHisASRAborted,
ccapAppTypeHisASRNoMatch,
ccapAppTypeHisASRNoInput,
ccapAppTypeHisASRMatch,
ccapAppTypeHisAAAAuthenticateFailure,
ccapAppTypeHisAAAAuthenticateSuccess,
ccapAppTypeHisAAAAuthorizeFailure,
ccapAppTypeHisAAAAuthorizeSuccess,
ccapAppTypeHisASNLSubscriptionsSent ,
ccapAppTypeHisASNLSubscriptionsSuccess,
ccapAppTypeHisASNLSubscriptionsFailed,
ccapAppTypeHisASNLNotifReceived,
ccapAppTypeHisPromptPlayAttempts,
ccapAppTypeHisPromptPlaySuccess,
ccapAppTypeHisPromptPlayFailed,
ccapAppTypeHisPromptPlayDuration,
ccapAppTypeHisRecordingAttempts,
ccapAppTypeHisRecordingSuccess,
ccapAppTypeHisRecordingFailed,
ccapAppTypeHisRecordingDuration,
ccapAppTypeHisTTSAttempts,
ccapAppTypeHisTTSSuccess,
ccapAppTypeHisTTSFailed
}
STATUS current
DESCRIPTION
"A collection of objects to monitor information for
each call application type. This provides statistics
from all the history instances for that call
application type."
::= { ciscoCallApplicationMIBGroups 3 }
ccapAppInstanceHistoryGroup OBJECT-GROUP
OBJECTS {
ccapAppInstHisSessionID,
ccapAppInstHisAppName,
ccapAppInstHisPSTNInCallSetupInd,
ccapAppInstHisPSTNInCallTotConn,
ccapAppInstHisPSTNInCallHandedOut,
ccapAppInstHisPSTNInCallHandOutRet,
ccapAppInstHisPSTNInCallInHandoff,
ccapAppInstHisPSTNInCallInHandoffRet,
ccapAppInstHisPSTNInCallDiscNormal,
ccapAppInstHisPSTNInCallDiscUsrErr,
ccapAppInstHisPSTNInCallDiscSysErr,
ccapAppInstHisPSTNOutCallSetupReq,
ccapAppInstHisPSTNOutCallTotConn,
ccapAppInstHisPSTNOutCallHandedOut,
ccapAppInstHisPSTNOutCallHandOutRet,
ccapAppInstHisPSTNOutCallInHandoff,
ccapAppInstHisPSTNOutCallInHandoffRet,
ccapAppInstHisPSTNOutCallDiscNormal,
ccapAppInstHisPSTNOutCallDiscUsrErr,
ccapAppInstHisPSTNOutCallDiscSysErr,
ccapAppInstHisIPInCallSetupInd,
ccapAppInstHisIPInCallTotConn,
ccapAppInstHisIPInCallHandedOut,
ccapAppInstHisIPInCallHandOutRet,
ccapAppInstHisIPInCallInHandoff,
ccapAppInstHisIPInCallInHandoffRet,
ccapAppInstHisIPInCallDiscNormal,
ccapAppInstHisIPInCallDiscUsrErr,
ccapAppInstHisIPInCallDiscSysErr,
ccapAppInstHisIPOutCallSetupReq,
ccapAppInstHisIPOutCallTotConn,
ccapAppInstHisIPOutCallHandedOut,
ccapAppInstHisIPOutCallHandOutRet,
ccapAppInstHisIPOutCallInHandoff,
ccapAppInstHisIPOutCallInHandoffRet,
ccapAppInstHisIPOutCallDiscNormal,
ccapAppInstHisIPOutCallDiscUsrErr,
ccapAppInstHisIPOutCallDiscSysErr,
ccapAppInstHisPlaceCallAttempts,
ccapAppInstHisPlaceCallSuccess,
ccapAppInstHisPlaceCallFailure,
ccapAppInstHisInHandoffCallback,
ccapAppInstHisInHandoffCallbackRet,
ccapAppInstHisInHandoffNoCallback,
ccapAppInstHisOutHandoffCallback,
ccapAppInstHisOutHandoffCallbackRet,
ccapAppInstHisOutHandoffNoCallback,
ccapAppInstHisOutHandofffailures,
ccapAppInstHisDocumentReadAttempts,
ccapAppInstHisDocumentReadSuccess,
ccapAppInstHisDocumentReadFailures,
ccapAppInstHisDocumentParseErrors,
ccapAppInstHisDocumentWriteAttempts,
ccapAppInstHisDocumentWriteSuccess,
ccapAppInstHisDocumentWriteFailures,
ccapAppInstHisDTMFAttempts,
ccapAppInstHisDTMFAborted,
ccapAppInstHisDTMFNoMatch,
ccapAppInstHisDTMFNoInput,
ccapAppInstHisDTMFMatch,
ccapAppInstHisDTMFLongPound,
ccapAppInstHisASRAttempts,
ccapAppInstHisASRAborted,
ccapAppInstHisASRNoMatch,
ccapAppInstHisASRNoInput,
ccapAppInstHisASRMatch,
ccapAppInstHisAAAAuthenticateFailure,
ccapAppInstHisAAAAuthenticateSuccess,
ccapAppInstHisAAAAuthorizeFailure,
ccapAppInstHisAAAAuthorizeSuccess,
ccapAppInstHisASNLSubscriptionsSent,
ccapAppInstHisASNLSubscriptionsSuccess,
ccapAppInstHisASNLSubscriptionsFailed,
ccapAppInstHisASNLNotifReceived,
ccapAppInstHisPromptPlayAttempts,
ccapAppInstHisPromptPlaySuccess,
ccapAppInstHisPromptPlayFailed,
ccapAppInstHisPromptPlayDuration,
ccapAppInstHisRecordingAttempts,
ccapAppInstHisRecordingSuccess,
ccapAppInstHisRecordingFailed,
ccapAppInstHisRecordingDuration,
ccapAppInstHisTTSAttempts,
ccapAppInstHisTTSSuccess,
ccapAppInstHisTTSFailed,
ccapAppInstHistEvtLogging
}
STATUS current
DESCRIPTION
"A collection of objects to display detailed
information on an instance of a call applications
once the application instance has terminated."
::= { ciscoCallApplicationMIBGroups 4 }
ccapAppGblActGroup OBJECT-GROUP
OBJECTS {
ccapAppGblActCurrentInstances,
ccapAppGblActPSTNInCallNowConn,
ccapAppGblActPSTNOutCallNowConn,
ccapAppGblActIPInCallNowConn,
ccapAppGblActIPOutCallNowConn,
ccapAppGblActPlaceCallInProgress,
ccapAppGblActHandoffInProgress,
ccapAppGblActPromptPlayActive,
ccapAppGblActRecordingActive,
ccapAppGblActTTSActive
}
STATUS current
DESCRIPTION
"A collection of objects to display gauges on the
current activity for all the active instances from all
the call application types on this gateway."
::= { ciscoCallApplicationMIBGroups 5 }
ccapAppGblCfgGroup OBJECT-GROUP
OBJECTS {
ccapAppGblStatsLogging,
ccapAppGblEventLogging,
ccapAppGblEvtLogflush,
ccapAppGblStatsClear,
ccapAppGblLastResetTime
}
STATUS current
DESCRIPTION
"A collection of objects for general configuration of
call application information system stats and event
logs for all the application instances on this gateway
and to display current configuration and reset time of
statistics."
::= { ciscoCallApplicationMIBGroups 6 }
ccapAppGblHisGroup OBJECT-GROUP
OBJECTS {
ccapAppGblHisTotalInstances,
ccapAppGblHisLastReset,
ccapAppGblHisPSTNInCallSetupInd,
ccapAppGblHisPSTNInCallTotConn,
ccapAppGblHisPSTNInCallHandedOut,
ccapAppGblHisPSTNInCallHandOutRet,
ccapAppGblHisPSTNInCallInHandoff,
ccapAppGblHisPSTNInCallInHandoffRet,
ccapAppGblHisPSTNInCallDiscNormal,
ccapAppGblHisPSTNInCallDiscUsrErr,
ccapAppGblHisPSTNInCallDiscSysErr,
ccapAppGblHisPSTNOutCallSetupReq,
ccapAppGblHisPSTNOutCallTotConn,
ccapAppGblHisPSTNOutCallHandedOut,
ccapAppGblHisPSTNOutCallHandOutRet,
ccapAppGblHisPSTNOutCallInHandoff,
ccapAppGblHisPSTNOutCallInHandoffRet,
ccapAppGblHisPSTNOutCallDiscNormal,
ccapAppGblHisPSTNOutCallDiscUsrErr,
ccapAppGblHisPSTNOutCallDiscSysErr,
ccapAppGblHisIPInCallSetupInd,
ccapAppGblHisIPInCallTotConn,
ccapAppGblHisIPInCallHandedOut,
ccapAppGblHisIPInCallHandOutRet,
ccapAppGblHisIPInCallInHandoff,
ccapAppGblHisIPInCallInHandoffRet,
ccapAppGblHisIPInCallDiscNormal,
ccapAppGblHisIPInCallDiscUsrErr,
ccapAppGblHisIPInCallDiscSysErr,
ccapAppGblHisIPOutCallSetupReq,
ccapAppGblHisIPOutCallTotConn,
ccapAppGblHisIPOutCallHandedOut,
ccapAppGblHisIPOutCallHandOutRet,
ccapAppGblHisIPOutCallInHandoff,
ccapAppGblHisIPOutCallInHandoffRet,
ccapAppGblHisIPOutCallDiscNormal,
ccapAppGblHisIPOutCallDiscUsrErr,
ccapAppGblHisIPOutCallDiscSysErr,
ccapAppGblHisPlaceCallAttempts,
ccapAppGblHisPlaceCallSuccess,
ccapAppGblHisPlaceCallFailure,
ccapAppGblHisInHandoffCallback,
ccapAppGblHisInHandoffCallbackRet,
ccapAppGblHisInHandoffNoCallback,
ccapAppGblHisOutHandoffCallback,
ccapAppGblHisOutHandoffCallbackRet,
ccapAppGblHisOutHandoffNoCallback,
ccapAppGblHisOutHandofffailures,
ccapAppGblHisDocumentReadAttempts,
ccapAppGblHisDocumentReadSuccess,
ccapAppGblHisDocumentReadFailures,
ccapAppGblHisDocumentParseErrors,
ccapAppGblHisDocumentWriteAttempts,
ccapAppGblHisDocumentWriteSuccess,
ccapAppGblHisDocumentWriteFailures,
ccapAppGblHisDTMFAttempts,
ccapAppGblHisDTMFAborted,
ccapAppGblHisDTMFNoMatch,
ccapAppGblHisDTMFNoInput,
ccapAppGblHisDTMFMatch,
ccapAppGblHisDTMFLongPound,
ccapAppGblHisASRAttempts,
ccapAppGblHisASRAborted,
ccapAppGblHisASRNoMatch,
ccapAppGblHisASRNoInput,
ccapAppGblHisASRMatch,
ccapAppGblHisAAAAuthenticateFailure,
ccapAppGblHisAAAAuthenticateSuccess,
ccapAppGblHisAAAAuthorizeFailure,
ccapAppGblHisAAAAuthorizeSuccess,
ccapAppGblHisASNLSubscriptionsSent,
ccapAppGblHisASNLSubscriptionsSuccess,
ccapAppGblHisASNLSubscriptionsFailed,
ccapAppGblHisASNLNotifReceived,
ccapAppGblHisPromptPlayAttempts,
ccapAppGblHisPromptPlaySuccess,
ccapAppGblHisPromptPlayFailed,
ccapAppGblHisPromptPlayDuration,
ccapAppGblHisRecordingAttempts,
ccapAppGblHisRecordingSuccess,
ccapAppGblHisRecordingFailed,
ccapAppGblHisRecordingDuration,
ccapAppGblHisTTSAttempts,
ccapAppGblHisTTSSuccess,
ccapAppGblHisTTSFailed
}
STATUS current
DESCRIPTION
"A collection of objects to display detailed
information from the gateway for all the history
instances which started from all application-types."
::= { ciscoCallApplicationMIBGroups 7 }
ccapAppIntfGblCfgGroup OBJECT-GROUP
OBJECTS {
ccapAppIntfGblStatsLogging,
ccapAppIntfGblEventLogging,
ccapAppIntfGblEvtLogFlush,
ccapAppIntfGblStatsClear,
ccapAppIntfGblLastResetTime
}
STATUS current
DESCRIPTION
"A collection of objects for general configuration of
call application interface information system stats and
event logs for all the application interfaces and
servers associated with each interface. Also this
group is to display current configuration and reset
time of statistics for all the interfaces counters."
::= { ciscoCallApplicationMIBGroups 8 }
ccapAppIntfHTTPGroup OBJECT-GROUP
OBJECTS {
ccapAppIntfHTTPStats,
ccapAppIntfHTTPEvtLog,
ccapAppIntfHTTPGetRequest,
ccapAppIntfHTTPGetSuccess,
ccapAppIntfHTTPGetFailure,
ccapAppIntfHTTPPostRequest,
ccapAppIntfHTTPPostSuccess,
ccapAppIntfHTTPPostFailure,
ccapAppIntfHTTPTxBytes,
ccapAppIntfHTTPRxBytes,
ccapAppIntfHTTPMinXferRate,
ccapAppIntfHTTPMaxXferRate,
ccapAppIntfHTTPAvgXferRate,
ccapAppIntfHTTPLastResetTime
}
STATUS current
DESCRIPTION
"A collection of objects to display statistics related
to interaction between application instances and HTTP
servers."
::= { ciscoCallApplicationMIBGroups 9 }
ccapAppIntfRTSPGroup OBJECT-GROUP
OBJECTS {
ccapAppIntfRTSPStats,
ccapAppIntfRTSPEvtLog,
ccapAppIntfRTSPReadRequest,
ccapAppIntfRTSPReadSuccess,
ccapAppIntfRTSPReadFailure,
ccapAppIntfRTSPWriteRequest,
ccapAppIntfRTSPWriteSuccess,
ccapAppIntfRTSPWriteFailure,
ccapAppIntfRTSPTxBytes,
ccapAppIntfRTSPRxBytes,
ccapAppIntfRTSPMinXferRate,
ccapAppIntfRTSPMaxXferRate,
ccapAppIntfRTSPAvgXferRate,
ccapAppIntfRTSPLastResetTime
}
STATUS current
DESCRIPTION
"A collection of objects to display statistics related
to interaction between application instances and RTSP
servers."
::= { ciscoCallApplicationMIBGroups 10 }
ccapAppIntfTFTPGroup OBJECT-GROUP
OBJECTS {
ccapAppIntfTFTPStats,
ccapAppIntfTFTPEvtLog,
ccapAppIntfTFTPReadRequest,
ccapAppIntfTFTPReadSuccess,
ccapAppIntfTFTPReadFailure,
ccapAppIntfTFTPWriteRequest,
ccapAppIntfTFTPWriteSuccess,
ccapAppIntfTFTPWriteFailure,
ccapAppIntfTFTPTxBytes,
ccapAppIntfTFTPRxBytes,
ccapAppIntfTFTPMinXferRate,
ccapAppIntfTFTPMaxXferRate,
ccapAppIntfTFTPAvgXferRate,
ccapAppIntfTFTPLastResetTime
}
STATUS current
DESCRIPTION
"A collection of objects to display statistics related
to interaction between application instances and TFTP
servers."
::= { ciscoCallApplicationMIBGroups 11 }
ccapAppIntfSMTPGroup OBJECT-GROUP
OBJECTS {
ccapAppIntfSMTPStats,
ccapAppIntfSMTPEvtLog,
ccapAppIntfSMTPReadRequest,
ccapAppIntfSMTPReadSuccess,
ccapAppIntfSMTPReadFailure,
ccapAppIntfSMTPWriteRequest,
ccapAppIntfSMTPWriteSuccess,
ccapAppIntfSMTPWriteFailure,
ccapAppIntfSMTPTxBytes,
ccapAppIntfSMTPRxBytes,
ccapAppIntfSMTPMinXferRate,
ccapAppIntfSMTPMaxXferRate,
ccapAppIntfSMTPAvgXferRate,
ccapAppIntfSMTPLastResetTime
}
STATUS current
DESCRIPTION
"A collection of objects to display statistics related
to interaction between application instances and SMTP
servers."
::= { ciscoCallApplicationMIBGroups 12 }
ccapAppIntfAAAMethodListGroup OBJECT-GROUP
OBJECTS {
ccapAppIntfAAAMethodListStats,
ccapAppIntfAAAMethodListEvtLog,
ccapAppIntfAAAMethodListReadRequest,
ccapAppIntfAAAMethodListReadSuccess,
ccapAppIntfAAAMethodListReadFailure,
ccapAppIntfAAAMethodListLastResetTime
}
STATUS current
DESCRIPTION
"A collection of objects to display statistics related
to interaction between application instances and AAA
methods."
::= { ciscoCallApplicationMIBGroups 13 }
ccapAppIntfASRGroup OBJECT-GROUP
OBJECTS {
ccapAppIntfASRStats,
ccapAppIntfASREvtLog,
ccapAppIntfASRReadRequest,
ccapAppIntfASRReadSuccess,
ccapAppIntfASRReadFailure,
ccapAppIntfASRLastResetTime
}
STATUS current
DESCRIPTION
"A collection of objects to display statistics related
to interaction between application instances and ASR
(Automatic Speech Recognition) servers."
::= { ciscoCallApplicationMIBGroups 14 }
ccapAppIntfTTSGroup OBJECT-GROUP
OBJECTS {
ccapAppIntfTTSStats,
ccapAppIntfTTSEvtLog,
ccapAppIntfTTSReadRequest,
ccapAppIntfTTSReadSuccess,
ccapAppIntfTTSReadFailure,
ccapAppIntfTTSLastResetTime
}
STATUS current
DESCRIPTION
"A collection of objects to display statistics related
to interaction between application instances and TTS
(Text To Speech) servers."
::= { ciscoCallApplicationMIBGroups 15 }
ccapAppIntfFlashGroup OBJECT-GROUP
OBJECTS {
ccapAppIntfFlashReadRequest,
ccapAppIntfFlashReadSuccess,
ccapAppIntfFlashReadFailure
}
STATUS current
DESCRIPTION
"A collection of objects to display statistics related
to interaction between application instances and Flash
file system on the IOS gateway."
::= { ciscoCallApplicationMIBGroups 16 }
ccapAppIntfRAMRecordGroup OBJECT-GROUP
OBJECTS {
ccapAppIntfRAMRecordReadRequest,
ccapAppIntfRAMRecordReadSuccess,
ccapAppIntfRAMRecordiongReadFailure,
ccapAppIntfRAMRecordRequest,
ccapAppIntfRAMRecordSuccess,
ccapAppIntfRAMRecordiongFailure
}
STATUS current
DESCRIPTION
"A collection of objects to display statistics related
to interaction between application instances and media
recording posted and re-read from RAM (memory) on this
gateway."
::= { ciscoCallApplicationMIBGroups 17 }
END