2757 lines
98 KiB
Plaintext
2757 lines
98 KiB
Plaintext
-- DRAFT
|
|
|
|
-- Copyright 1997-1998 by Allied Telesyn International, Inc.
|
|
--
|
|
-- Name : ATSWTCH2.MIB
|
|
-- Version : 1.8 for 802.1q Compliant Fenix switch.
|
|
-- Description : Private MIB for ATI Next Generation atswitch Switch (AT37XX).
|
|
-- : This MIB will be used in Windows and UNIX Environment.
|
|
|
|
-- History :
|
|
-- * 08-13-97 - Create.
|
|
-- * 01-11-98 Changed the MIB object PortCount to return correct number.
|
|
-- * 01-28-98 Changed the PvVlanName to PvVlanId. Also some changes
|
|
-- * in the PortStatus, etc.
|
|
-- * 02-04-98 Removed TpFdbAge as the ASIC doesn't support the Age.
|
|
-- * 02-05-98 Added atswitchIPAddressStatus
|
|
-- * 02-18-98 Changed the PortNum and MonId to 27 from 25 and 16 respct.
|
|
-- * 03-03-98 Changed the PortNum and MonId and wherever the Ids were
|
|
-- * hardcoded. Also changed the description here and there.
|
|
-- * 04-28-98 Added the MDAType, added more state for atswitchPortState,
|
|
-- * 05-21-98 Added Objects concerened with 8124XL.
|
|
-- * 05-21-98 Added FlowControl only for 8124XL and changed PortSpeed
|
|
-- to read-write.
|
|
-- * 06-01-98 Added 8124XL product Id.
|
|
-- * 09-14-98 Changed Other to 10 and added 3714XL.
|
|
-- * 09-29-98 added FlowControl as a device Config Param.
|
|
-- * 10-02-98 Changed the PvVlanId Integer back to PvVlanName string.
|
|
-- * 10-01-98 Added Port2Vlan Table to be read-write and also
|
|
-- * Added Implicit Vlans for each port Entry.
|
|
-- * 10-05-98 Added atswitchBeVlanTagId and atswitchBeVlanOuputPorts and
|
|
-- * changed the atswitchBeVlanStatus decsription to be more of a
|
|
-- * Row Status Object.
|
|
-- * 09-17-98 Added the security feature. ( added later)
|
|
-- * 12-10-98 Aded Trunk Group and added StaticMACVlan suppport.
|
|
-- * Trying to merge fenix and Buffalo to make it a single MIB.
|
|
|
|
|
|
ATSWTCH2-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
enterprises,Counter,IpAddress,TimeTicks
|
|
FROM RFC1155-SMI
|
|
DisplayString
|
|
FROM RFC1213-MIB
|
|
TRAP-TYPE
|
|
FROM RFC-1215
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
|
|
--
|
|
-- General Definitions
|
|
--
|
|
|
|
MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address
|
|
BridgeId ::= OCTET STRING (SIZE (8)) -- the
|
|
-- Bridge-Identifier
|
|
-- as used in the
|
|
-- Spanning Tree
|
|
-- Protocol to uniquely identify a bridge. Its first two
|
|
-- octets (in network byte order) contain a priority
|
|
-- value and its last 6 octets contain the MAC address
|
|
-- used to refer to a bridge in a unique fashion
|
|
-- (typically, the numerically smallest MAC address
|
|
-- of all ports on the bridge).
|
|
|
|
-- Several objects in this MIB module represent values of
|
|
-- timers used by the Spanning Tree Protocol. In this
|
|
-- MIB, these timers have values in units of hundreths of
|
|
-- a second (i.e. 1/100 secs).
|
|
-- These timers, when stored in a Spanning Tree Protocol's
|
|
-- BPDU, are in units of 1/256 seconds. Note, however,
|
|
-- that 802.1D-1990 specifies a settable granularity of
|
|
-- no more than 1 second for these timers. To avoid
|
|
-- ambiguity, a data type is defined here as a textual
|
|
-- convention and all representation of these timers
|
|
-- in this MIB module are defined using this data type. An
|
|
-- algorithm is also defined for converting between the
|
|
-- different units, to ensure a timer's value is not
|
|
-- distorted by multiple conversions.
|
|
-- The data type is:
|
|
|
|
Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
|
|
|
|
-- To convert a Timeout value into a value in units of
|
|
-- 1/256 seconds, the following algorithm should be used:
|
|
--
|
|
-- b = floor( (n * 256) / 100)
|
|
--
|
|
-- where:
|
|
-- floor = quotient [ignore remainder]
|
|
-- n is the value in 1/100 second units
|
|
-- b is the value in 1/256 second units
|
|
--
|
|
-- To convert the value from 1/256 second units back to
|
|
-- 1/100 seconds, the following algorithm should be used:
|
|
--
|
|
-- n = ceiling( (b * 100) / 256)
|
|
--
|
|
-- where:
|
|
-- ceiling = quotient [if remainder is 0], or
|
|
-- quotient + 1 [if remainder is non-zero]
|
|
-- n is the value in 1/100 second units
|
|
-- b is the value in 1/256 second units
|
|
--
|
|
-- Note: it is important that the arithmetic operations are
|
|
-- done in the order specified (i.e., multiply first, divide
|
|
-- second).
|
|
|
|
|
|
|
|
-- group OBJECT IDENTIFIERs
|
|
-- atiproduct is the branch for SNMP OID purpose.
|
|
|
|
alliedTelesyn OBJECT IDENTIFIER ::= { enterprises 207 }
|
|
atiProduct OBJECT IDENTIFIER ::= { alliedTelesyn 1 }
|
|
mibObject OBJECT IDENTIFIER ::= { alliedTelesyn 8 }
|
|
atswitchMib OBJECT IDENTIFIER
|
|
-- LAST-UPDATED "9708200000Z"
|
|
-- ORGANIZATION "Allied Telesyn International."
|
|
-- CONTACT-INFO
|
|
-- " Allied Telesyn International
|
|
-- Customer Service
|
|
--
|
|
-- Postal: 950 kifer Road
|
|
-- Sunnyvale, CA 94087
|
|
-- USA
|
|
--
|
|
-- Email: support@alliedtelesyn.com
|
|
--
|
|
-- DESCRIPTION
|
|
-- "MIB for the atswitch switch
|
|
-- atswitch "
|
|
::= { mibObject 10}
|
|
|
|
-- Each Group supported by this mib.
|
|
|
|
atswitchSysGroup OBJECT IDENTIFIER ::= { atswitchMib 1}
|
|
atswitchConfigGroup OBJECT IDENTIFIER ::= { atswitchMib 2}
|
|
atswitchPortConfigGroup OBJECT IDENTIFIER ::= { atswitchMib 3}
|
|
atswitchVlanConfigGroup OBJECT IDENTIFIER ::= { atswitchMib 4}
|
|
atswitchEthernetStatsGroup OBJECT IDENTIFIER ::= { atswitchMib 5}
|
|
atswitchEthPortStatsGroup OBJECT IDENTIFIER ::= { atswitchMib 6}
|
|
atswitchFwdVlanGroup OBJECT IDENTIFIER ::= { atswitchMib 7}
|
|
atswitchTrapAttrGroup OBJECT IDENTIFIER ::= { atswitchMib 8}
|
|
atswitchBridgeMib OBJECT IDENTIFIER ::= { atswitchMib 9}
|
|
atswitchStaticMACGroup OBJECT IDENTIFIER ::= { atswitchMib 10}
|
|
atswitchPortMacAddrGroup OBJECT IDENTIFIER ::= { atswitchMib 12}
|
|
atswitchDebugMallocLogGroup OBJECT IDENTIFIER ::= { atswitchMib 13}
|
|
-- atswitchTrunkGroup OBJECT IDENTIFIER ::= { atswitchMib 14}
|
|
|
|
-- groups for the Bridge in the AT37XX
|
|
|
|
atswitchBrBase OBJECT IDENTIFIER ::= { atswitchBridgeMib 1 }
|
|
|
|
atswitchBrStp OBJECT IDENTIFIER ::= { atswitchBridgeMib 2 }
|
|
|
|
atswitchBrTp OBJECT IDENTIFIER ::= { atswitchBridgeMib 3 }
|
|
--
|
|
-- atswitchSysGroup Entry
|
|
--
|
|
-- Different groups are defined like Reset,Type (8 port,16 port,24 ports),
|
|
-- H/W,S/W,IP,SNMP.
|
|
|
|
atswitchProductType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
at-3726(1),
|
|
at-3714(2),
|
|
at-8124XL(3),
|
|
at-8118(4),
|
|
at-3726XL(5),
|
|
at-3714FXL(6),
|
|
at-3716XL(7),
|
|
other(10)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This object will return Product Type.
|
|
"
|
|
::= { atswitchSysGroup 1 }
|
|
|
|
atswitchEthernetPortCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This object will return the number of 10/100 Mbps Ethernet ports
|
|
on the switch.
|
|
"
|
|
::= { atswitchSysGroup 2 }
|
|
|
|
atswitchReset OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
switch-no-reset (1),
|
|
switch-reset (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
Setting this object to 'switch-reset' will
|
|
cause the switch to perform a hardware reset
|
|
within approximately 4-6 seconds.
|
|
Setting this object to 'switch-no-reset will
|
|
have no effect.
|
|
The value 'no-reset' will be returned whenever
|
|
this object is retrieved.
|
|
"
|
|
::= { atswitchSysGroup 3 }
|
|
|
|
atswitchMDA1Type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rj45-mii(1),
|
|
fiber(2),
|
|
none(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This object returns the MDA type of the Uplink port
|
|
|
|
"
|
|
::= { atswitchSysGroup 4 }
|
|
atswitchMDA2Type OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rj45-mii(1),
|
|
fiber(2),
|
|
none(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This Object is supported in 81XX product line
|
|
only.
|
|
This object returns the MDA type of the Uplink Port
|
|
named 'B'. It returns 'none' if a 'B' MDA slot
|
|
is not installed.
|
|
"
|
|
::= { atswitchSysGroup 5 }
|
|
|
|
|
|
atswitchDeviceFlowControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This Object is supported on 81XX products only.
|
|
This object configures the Flow Control of the Device
|
|
|
|
"
|
|
::= { atswitchSysGroup 6 }
|
|
|
|
|
|
atswitchSwGroup OBJECT IDENTIFIER ::= {atswitchSysGroup 7 }
|
|
|
|
atswitchIpGroup OBJECT IDENTIFIER ::= {atswitchSysGroup 8}
|
|
|
|
atswitchNMGroup OBJECT IDENTIFIER ::= {atswitchSysGroup 9}
|
|
|
|
--The software information group provides details about the size
|
|
--of the image software and the release and version of the present
|
|
--software.
|
|
|
|
--atswitchSwGroup OBJECT IDENTIFIER ::= { atswitchSysGroup 7 }
|
|
|
|
atswitchSwProduct OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Identifies the software product the device is running.
|
|
"
|
|
::= { atswitchSwGroup 1 }
|
|
|
|
atswitchSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Identifies the version number of the present release. "
|
|
::= { atswitchSwGroup 2 }
|
|
|
|
|
|
-- The Ip Group
|
|
--
|
|
-- atswitchIpGroup OBJECT IDENTIFIER ::= {atswitchSysGroup 7}
|
|
--
|
|
-- The Ip Sys group contains IP Address which is current and configured IP
|
|
-- address which gets effective when reset. Also, subnet mask and Default
|
|
-- Gateway address.
|
|
--
|
|
atswitchCurrentIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
|
|
" The Current IP address is the one which is currently used
|
|
and is obtained dynamically through one of the protocols
|
|
interaction.( DHCP or Bootp.)
|
|
|
|
This address is NULL if the Address is Statically configured.
|
|
"
|
|
::= { atswitchIpGroup 1 }
|
|
|
|
atswitchConfiguredIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The Configured IP address of the device. This is the address
|
|
configured through Network or Local Omega. "
|
|
::= { atswitchIpGroup 2 }
|
|
|
|
atswitchConfiguredSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The Configured Subnet Mask of the device."
|
|
::= { atswitchIpGroup 3 }
|
|
|
|
atswitchConfiguredRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The Configured Gateway/Router address of the device"
|
|
::= { atswitchIpGroup 4 }
|
|
|
|
atswitchIPAddressStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
from-dhcp(1),
|
|
from-bootp(2),
|
|
from-psuedoip(3),
|
|
from-Omega(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The IP Address can be obtained/configured by any of the above
|
|
different ways. This object specifies how IP address currently
|
|
on the switch Box, was configured/obtained.
|
|
"
|
|
::= { atswitchIpGroup 5 }
|
|
|
|
atswitchDNServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The Configured DNS Server address of the device"
|
|
::= { atswitchIpGroup 6 }
|
|
|
|
atswitchDefaultDomainName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This Object defines the Default Domain where this switch can be
|
|
belong to.
|
|
"
|
|
::= { atswitchIpGroup 7 }
|
|
|
|
|
|
--
|
|
-- SNMP NetManagemnt related MIB object
|
|
--
|
|
-- atswitchNMGroup OBJECT IDENTIFIER ::= {atswitchSysGroup 8}
|
|
--
|
|
--
|
|
|
|
atswitchNwMgrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchNwMgrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
A list of SNMP Trap Manager stations Entries.
|
|
The number of entries is given by the
|
|
switchNwMgrTotal mib object.
|
|
"
|
|
::= { atswitchNMGroup 1 }
|
|
|
|
atswitchNwMgrEntry OBJECT-TYPE
|
|
SYNTAX AtswitchNwMgrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
Trap receipt Manager Entry containing ipaddress of
|
|
the configured NMS's to which Traps are sent.
|
|
"
|
|
INDEX { atswitchNwMgrIndex }
|
|
::= { atswitchNwMgrTable 1 }
|
|
|
|
AtswitchNwMgrEntry ::=
|
|
SEQUENCE {
|
|
atswitchNwMgrIndex INTEGER,
|
|
atswitchNwMgrIpAddr IpAddress
|
|
}
|
|
|
|
atswitchNwMgrIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
The Index of the Managers Ip address.
|
|
|
|
"
|
|
::= { atswitchNwMgrEntry 1 }
|
|
|
|
atswitchNwMgrIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
The IP Address of the NMS host configured.
|
|
"
|
|
::= { atswitchNwMgrEntry 2 }
|
|
|
|
|
|
-- Switch config Group is just for the Switching of Ethernet Packets.
|
|
-- The Port Config and Vlan Config comes next.
|
|
-- atswitchConfigGroup OBJECT IDENTIFIER ::= { atswitchMib 2}
|
|
|
|
|
|
atswitchPortDisableOnSecurityViolation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable-on-security-voilation(1),
|
|
suspend-on-double-address(2),
|
|
security-not-yet-initalized(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This System wide attribute allows the port to be disabled on
|
|
Violation of the Security. or suspend the port due to Duplicate Address.
|
|
Needs More explaination after somebody figures out whether atswitch
|
|
needs the suspend state.
|
|
"
|
|
::= { atswitchConfigGroup 1 }
|
|
|
|
|
|
|
|
atswitchMirroringSourcePort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This is the Source port number for which there is another
|
|
mirror port.If the atswitchEthConfigMirrorState is Enabled then
|
|
,the mirror portgets routed with all the packets going in and
|
|
out of Source port. This arrangement is to put an RMON Probe
|
|
on mirrored port to Probe the traffic on the Source
|
|
port. One of the port is dedicated to this so that for
|
|
any port as source port, this dedicated port can be a mirrored
|
|
port.
|
|
This object will return a '0' if the MirrorState is not
|
|
enabled.
|
|
For the AT-81XX only the receive activity can be mirrored.
|
|
"
|
|
::= { atswitchConfigGroup 2 }
|
|
|
|
atswitchMirrorState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
receive(1),
|
|
transmit(2),
|
|
both(3),
|
|
disabled(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" if the state of Mirroring is enabled by selecting one of the
|
|
first three values , then the Mirroring explained above works.
|
|
If disabled, port operation works normally. No Traffic
|
|
gets routed from MirroringSourcePort to Destination Mirrored Port.
|
|
Mirroring of both transmit and receive activity can only be
|
|
done if the port is half duplex. Choose both only if you know
|
|
the port will be run in half duplex mode.
|
|
"
|
|
::= { atswitchConfigGroup 3 }
|
|
|
|
atswitchMirroringDestinationPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This is the Destination port number for which there is another
|
|
mirror port.If the atswitchEthConfigMirrorState is Enabled then
|
|
,the mirror portgets routed with all the packets going in and
|
|
out of Destination port. This arrangement is to put an RMON Probe
|
|
on mirrored port to Probe the traffic on the Destination
|
|
port. One of the port is dedicated to this so that for
|
|
any port as destination port, this dedicated port can be a mirrored
|
|
port.
|
|
This object will return a '0' if the MirrorState is not
|
|
enabled.
|
|
For the AT-81XX only the receive activity can be mirrored.
|
|
"
|
|
::= { atswitchConfigGroup 4 }
|
|
|
|
|
|
atswitchSecurityConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled-with-learning-locked(2),
|
|
limited-enabled(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This Object is suppported only in 37XX product Line.
|
|
Security feature configuration Object.
|
|
The Security disable would let the device carry on the
|
|
learn-new-address-as-it-comes-in mode as usual.
|
|
When security is enabled-with-learning-locked, the learning of
|
|
new address is stopped and the addresses locked in the device is
|
|
used as the security Database. If an address comes in which is
|
|
not present in the Device Security Database, then any of the
|
|
atswitchSecurityAction Configured is triggered.
|
|
When limited-enabled is selected, a per-port
|
|
atswitchPortSecurityNumberOfAddresses specify the max number
|
|
of MACs to be learned .
|
|
"
|
|
::= { atswitchConfigGroup 5 }
|
|
|
|
atswitchSecurityAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
send-trap-only(1),
|
|
disable-port-only(2),
|
|
disable-port-and-send-trap(3),
|
|
do-nothing(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
Security Action to be carried when the atswitchSecurityConfig is
|
|
enabled-with-learning-locked or limted-enabled.
|
|
"
|
|
::= { atswitchConfigGroup 6 }
|
|
|
|
atswitchDebugAvailableBytes OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This is strictly for Debug reason and this object should not be
|
|
beleived as the correct number
|
|
"
|
|
::= { atswitchConfigGroup 7 }
|
|
|
|
atswitchTrunkConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This Object Configures the Trunking for the Uplink Ports only.
|
|
This feature is currently available only in Fenix 37XX-XL
|
|
hardware.
|
|
"
|
|
::= { atswitchConfigGroup 8 }
|
|
|
|
|
|
-- SwitchPortConfigGroup:
|
|
-- This subgroup contains basic port configurable parameters
|
|
--
|
|
|
|
atswitchPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of basic port configuration information."
|
|
::= { atswitchPortConfigGroup 1 }
|
|
|
|
atswitchPortEntry OBJECT-TYPE
|
|
SYNTAX AtswitchPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the port config table."
|
|
INDEX { atswitchPortNumber }
|
|
::= { atswitchPortTable 1 }
|
|
|
|
AtswitchPortEntry ::=
|
|
SEQUENCE {
|
|
atswitchPortNumber
|
|
INTEGER,
|
|
atswitchPortName
|
|
DisplayString,
|
|
atswitchPortAutosenseOrHalfDuplex
|
|
INTEGER,
|
|
atswitchPortLinkState
|
|
INTEGER,
|
|
atswitchPortDuplexStatus
|
|
INTEGER ,
|
|
atswitchPortSpeed
|
|
INTEGER,
|
|
atswitchPortState
|
|
INTEGER,
|
|
atswitchPortTransmitPacingConfig
|
|
INTEGER,
|
|
atswitchPortSTPConfig
|
|
INTEGER,
|
|
atswitchPortBridgeid
|
|
INTEGER,
|
|
atswitchPortSTPCost
|
|
INTEGER,
|
|
atswitchPortSTPPriority
|
|
INTEGER,
|
|
atswitchPortSwitchingType
|
|
INTEGER,
|
|
atswitchPortFlowControlEnable
|
|
INTEGER,
|
|
atswitchPortSecurityNumberOfAddresses
|
|
INTEGER
|
|
}
|
|
|
|
atswitchPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the port of the switch."
|
|
::= { atswitchPortEntry 1 }
|
|
|
|
atswitchPortName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute associates a user defined string name
|
|
with the port."
|
|
::= { atswitchPortEntry 2 }
|
|
|
|
atswitchPortAutosenseOrHalfDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
portAutoSense(1),
|
|
forceHalfDuplex(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute allows an administrative request to
|
|
configure whether this port can Autosense or Force the Half Duplex
|
|
"
|
|
::= { atswitchPortEntry 3 }
|
|
|
|
atswitchPortLinkState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
online(1),
|
|
offline(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute allows an administrative request to
|
|
read the status of link state on this port."
|
|
::= { atswitchPortEntry 4 }
|
|
|
|
atswitchPortDuplexStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fullDuplex(1),
|
|
halfDuplex(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute allows an administrative request to
|
|
read the status of Duplex on this port."
|
|
::= { atswitchPortEntry 5 }
|
|
|
|
atswitchPortSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenMBits(1),
|
|
hundredMBits(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This attribute allows an administrative request to
|
|
read/write the speed of this port.
|
|
This attribure is read-only for all the Ports on
|
|
AT-37XX product .
|
|
This Attribute is read-write for ATS21 (AT81XX) product
|
|
Only. This attribute allows an administrative request to
|
|
change the speed on ATS21 product."
|
|
::= { atswitchPortEntry 6 }
|
|
|
|
atswitchPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2),
|
|
blocking(3),
|
|
listening(4),
|
|
learning(5)
|
|
}
|
|
--,
|
|
-- disable-due-to-address-duplication(3),
|
|
-- disable-due-to-address-mismatch(4),
|
|
-- suspended-due-to-address-duplication(5),
|
|
-- suspended-due-to-address-mismatch(6),
|
|
-- suspended-due-to-link-failure(7)
|
|
-- }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute allows an administrative request to
|
|
disable or enable communications on this port.It also
|
|
responds with the status of the port .Except enabled(1) and
|
|
disabled(2), all values are read-only status.
|
|
"
|
|
::= { atswitchPortEntry 7 }
|
|
|
|
atswitchPortTransmitPacingConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This Object is supported on AT36XX product line Only.
|
|
This attribute allows the transmit Pacing to be enabled or
|
|
disabled.
|
|
"
|
|
::= { atswitchPortEntry 8 }
|
|
|
|
atswitchPortSTPConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute allows a bridging Mode to be configured with
|
|
either Spanning Tree enabled or disabled. When Spanning tree is
|
|
enabled, make sure that this port is belonging to a valid
|
|
Bridge_id. Spanning Tree is enabled only when a valid Bridge_id
|
|
is set.
|
|
"
|
|
::= { atswitchPortEntry 9}
|
|
|
|
atswitchPortBridgeid OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The Bridge to which this port belongs to .
|
|
"
|
|
::= { atswitchPortEntry 10 }
|
|
|
|
|
|
atswitchPortSTPCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The Cost of the Spanning Tree Protocol.This object is valid only
|
|
when STP is enabled.
|
|
"
|
|
::= { atswitchPortEntry 11 }
|
|
|
|
atswitchPortSTPPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The Priority of the spanning Tree Protocol. This object is valid when
|
|
STP is enabled.
|
|
"
|
|
::= { atswitchPortEntry 12 }
|
|
|
|
atswitchPortSwitchingType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fast-cut-through(1),
|
|
store-and-forward(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This per-port attribute describes whether the port identified
|
|
by atswitchPortNumber uses store-and-forward bridging for local switched
|
|
Ethernet packets or cut-through. The Hardware allows cut-through on
|
|
Transmission and cut-through-on Receive and the same for the
|
|
store-and-forward. But some of the Config option does not make any sense.
|
|
So, for now there is no distiction of Rx and Tx. Both Tx/Rx support
|
|
store-and-forward or cut-through.
|
|
This Object is not applicable for 37XX with XL hardware as the Hardware
|
|
does not support both Cut through and Store and Forward. It is default
|
|
Store and Forward. Even though the Set on either of them is done, Hardware does
|
|
not do the Cut through Switching.
|
|
"
|
|
::= { atswitchPortEntry 13 }
|
|
|
|
atswitchPortFlowControlEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
enable(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
" This Per_port attribute is only for ATS21 product.(81XX).
|
|
This per-port attribute describes whether the port
|
|
identified has flow Control Enabled or not. Flow Control
|
|
on Full Duplex and Half Duplex is detected and
|
|
Automatically, flow control accordingly is taken care of.
|
|
BY Default, Flow Control is Disabled.
|
|
"
|
|
::= { atswitchPortEntry 14 }
|
|
|
|
atswitchPortSecurityNumberOfAddresses OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This object configures the Max number of addresses at an
|
|
instance to be learnt by the device. If the learnt addresses
|
|
number is above this number, then the atswitchSecurityAction is
|
|
triggered . when the number of learnt addresses exceeds this
|
|
number ,the the atswitchSecurityAction is triggered only if
|
|
atswitchSecurityConfig is set to limited-enalbled. ELse
|
|
nothing is triggered.
|
|
"
|
|
::= { atswitchPortEntry 15 }
|
|
|
|
-- AtswitchVlanConfigGroup:
|
|
-- This subgroup contains VLAN configurable parameters
|
|
|
|
-- atswitchVlanConfigGroup OBJECT IDENTIFIER ::= { atswitchMib 4}
|
|
|
|
|
|
-- atswitchBasicVlanTable:
|
|
-- This table defines the valid Virtual LANs.
|
|
|
|
atswitchBasicVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchBasicVlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of Virtual LAN configured."
|
|
::= { atswitchVlanConfigGroup 1 }
|
|
|
|
atswitchBasicVlanEntry OBJECT-TYPE
|
|
SYNTAX AtswitchBasicVlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing VLAN information."
|
|
INDEX { atswitchBeVlanIndex }
|
|
::= { atswitchBasicVlanTable 1 }
|
|
|
|
AtswitchBasicVlanEntry ::=
|
|
SEQUENCE {
|
|
atswitchBeVlanIndex
|
|
INTEGER,
|
|
atswitchBeVlanName
|
|
DisplayString,
|
|
atswitchBeVlanTagId
|
|
INTEGER,
|
|
atswitchBeVlanPortMask
|
|
DisplayString,
|
|
atswitchBeVlanRowStatus
|
|
INTEGER
|
|
}
|
|
|
|
atswitchBeVlanIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the VLAN."
|
|
::= { atswitchBasicVlanEntry 1 }
|
|
|
|
atswitchBeVlanName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..20))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute associates a user defined string with
|
|
the Virtual LAN. To configure a new VLAN, do 'set' operation on
|
|
this object with the VLAN name. To delete an VLAN, do 'set'
|
|
operation with string '*'.
|
|
Before configuring any of the objects in this row , set the
|
|
atswitchVlanStatus to 'under-construction' and once configured with all
|
|
the information, please set the same object to operational
|
|
"
|
|
::= { atswitchBasicVlanEntry 2 }
|
|
|
|
atswitchBeVlanTagId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4095)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This object is supported by 37xx series of fenix with the
|
|
VLAN tagging capability hardware only. Please check whether
|
|
the SysObjectId is greater than 29.
|
|
|
|
This object configures the VId in the Tag Information header
|
|
in accordance with 802.1q spec.
|
|
|
|
Before configuring any of the objects in this row , set the
|
|
atswitchVlanStatus to 'under-construction' and once configured with all
|
|
the information, please set the same object to operational
|
|
"
|
|
::= { atswitchBasicVlanEntry 3 }
|
|
|
|
atswitchBeVlanPortMask OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This object is supported by 37xx series of fenix with the
|
|
VLAN tagging capability hardware only. Please check whether
|
|
the SysObjectId is greater than 29.
|
|
|
|
This Object builds the Output Ports that participate in the
|
|
Vlan with the atswitchBeVlanName. The Format of the input string
|
|
would be like '1,2,5,7,12'.
|
|
Before configuring any of the objects in this row , set the
|
|
atswitchVlanStatus to 'under-construction' and once configured
|
|
with all the information, please set the same object to
|
|
operational
|
|
"
|
|
::= { atswitchBasicVlanEntry 4 }
|
|
|
|
|
|
atswitchBeVlanRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(1),
|
|
operational(2),
|
|
under-construction(3),
|
|
not-operational(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This object is supported by 37xx series of fenix with the
|
|
VLAN tagging capability hardware only. Please check whether
|
|
the SysObjectId is greater than 29.
|
|
|
|
This object identifies the atswitchBeVLANEntry Row Status .
|
|
The User sets this object to under-construction, to start with
|
|
to create a row.
|
|
Once the User Configures the VlanName and TagId and also the
|
|
Output Ports.This object should be set to operational.
|
|
If the user does not set this object to operational,
|
|
the whole row is lost .when a 'get' of this row is
|
|
done, this uncommited row is not seen.
|
|
configured in the switch.
|
|
"
|
|
::= { atswitchBasicVlanEntry 5 }
|
|
|
|
-- Port2VlanTable.
|
|
|
|
atswitchPort2VlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchPort2VlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of per port Virtual LAN configuration."
|
|
::= { atswitchVlanConfigGroup 2 }
|
|
|
|
atswitchPort2VlanEntry OBJECT-TYPE
|
|
SYNTAX AtswitchPort2VlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing per port VLAN information."
|
|
INDEX { atswitchPvPortNumber }
|
|
::= { atswitchPort2VlanTable 1 }
|
|
|
|
AtswitchPort2VlanEntry ::=
|
|
SEQUENCE {
|
|
atswitchPvPortNumber
|
|
INTEGER,
|
|
atswitchPvVlanName
|
|
DisplayString
|
|
}
|
|
|
|
atswitchPvPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the port on the switch."
|
|
::= { atswitchPort2VlanEntry 1 }
|
|
|
|
atswitchPvVlanName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This attribute associates a user defined string with
|
|
the Virtual LAN. This Object is the same as atswitchBeVlanName.
|
|
Please make sure to give the same string as atswitchBeVlanName."
|
|
::= { atswitchPort2VlanEntry 2 }
|
|
|
|
|
|
-- Ethernet Monitor Group.
|
|
--
|
|
-- The Monitor group contains statistics measured by the
|
|
-- concentator for each port. These statistics take the form
|
|
-- of free running counters that start from zero.
|
|
--
|
|
-- atswitchEthStatsGroup OBJECT IDENTIFIER ::= { atswitchMib 5}
|
|
--
|
|
|
|
atswitchEthMonStats OBJECT IDENTIFIER ::= { atswitchEthernetStatsGroup 1}
|
|
atswitchEthErrorStats OBJECT IDENTIFIER ::= { atswitchEthernetStatsGroup 2}
|
|
|
|
atswitchEthMonRxGoodFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The total number of Good Frames received on this module.
|
|
"
|
|
::= { atswitchEthMonStats 1 }
|
|
|
|
atswitchEthMonTxGoodFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The total number of Good Frames Transmitted by this module.
|
|
"
|
|
::= { atswitchEthMonStats 2 }
|
|
|
|
atswitchEthMonTxTotalBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The total number of Bytes transmitted from this module.
|
|
"
|
|
::= { atswitchEthMonStats 3 }
|
|
|
|
atswitchEthMonTxDeferred OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
This is the count of first time Transmission attempt which
|
|
failed on an interface due to medium being busy.
|
|
"
|
|
::= { atswitchEthMonStats 4 }
|
|
|
|
atswitchEthMonTxCollisions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The total number of collisions while switching on an interface.
|
|
"
|
|
::= { atswitchEthMonStats 5 }
|
|
|
|
--
|
|
-- The Ethernet Error Statistics
|
|
--
|
|
-- The Ethernet Error Statistics group contains certain errors
|
|
-- measured by the switch. These statistics take the form of
|
|
-- free running counters that start from zero.
|
|
--
|
|
|
|
atswitchEthErrorCRC OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The total number of CRC errors on received packets.
|
|
"
|
|
::= { atswitchEthErrorStats 1 }
|
|
|
|
atswitchEthErrorAlignment OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The total number of packets received that has alignment
|
|
errors
|
|
"
|
|
::= { atswitchEthErrorStats 2 }
|
|
|
|
|
|
atswitchEthErrorRxBadFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The counter is incremented when a bad frame was received.
|
|
"
|
|
::= { atswitchEthErrorStats 3 }
|
|
|
|
atswitchEthErrorLateCollisions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
This object counts the number of times the collison was
|
|
detected in the port.
|
|
"
|
|
::= { atswitchEthErrorStats 4 }
|
|
|
|
|
|
atswitchEthErrorTxTotal OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
Total number of error resulted from transfer operations.
|
|
"
|
|
::= { atswitchEthErrorStats 6 }
|
|
|
|
|
|
-- atswitchEthPortStatsGroup OBJECT IDENTIFIER ::= { atswitchMib 6}
|
|
|
|
atswitchEthPortMonStats OBJECT IDENTIFIER ::= { atswitchEthPortStatsGroup 1}
|
|
atswitchEthPortError OBJECT IDENTIFIER ::= { atswitchEthPortStatsGroup 2}
|
|
|
|
-- Ethernet Port Monitor Group.
|
|
--
|
|
-- The Monitor Port group contains statistics measured by the
|
|
-- concentator for each port. These statistics take the form
|
|
-- of free running counters that start from zero.
|
|
--
|
|
--
|
|
|
|
atswitchEthPortMonTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchEthPortMonEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
A list of statistics entries."
|
|
::= { atswitchEthPortMonStats 1 }
|
|
|
|
atswitchEthPortMonEntry OBJECT-TYPE
|
|
SYNTAX AtswitchEthPortMonEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
A collection of statistics kept for a particular port.
|
|
"
|
|
INDEX {atswitchEthPortMonId }
|
|
::= { atswitchEthPortMonTable 1 }
|
|
|
|
AtswitchEthPortMonEntry ::=
|
|
SEQUENCE {
|
|
atswitchEthPortMonId INTEGER,
|
|
atswitchEthPortMonTxTotalBytes Counter,
|
|
atswitchRxGoodFrames Counter,
|
|
atswitchTxGoodFrames Counter,
|
|
atswitchTxBroadcastFrames Counter,
|
|
atswitchTxMulticastFrames Counter,
|
|
atswitchAddrDuplicate Counter,
|
|
atswitchAddrMismatches Counter,
|
|
atswitchRxOverruns Counter
|
|
}
|
|
|
|
atswitchEthPortMonId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The relative position of a port within a switch starting with 1.
|
|
"
|
|
::= { atswitchEthPortMonEntry 1 }
|
|
|
|
atswitchEthPortMonTxTotalBytes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The total number of Bytes transmited to this port.
|
|
"
|
|
::= { atswitchEthPortMonEntry 2 }
|
|
|
|
atswitchRxGoodFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The total number of good packets(including unicast,broadcast
|
|
packets and multicast packets) received "
|
|
::= { atswitchEthPortMonEntry 3 }
|
|
|
|
atswitchTxGoodFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The total number of good packets(including bad packets,
|
|
broadcast packets and multicast packets) transmitted successfully
|
|
"
|
|
::= { atswitchEthPortMonEntry 4 }
|
|
|
|
atswitchTxBroadcastFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The total number of packets transmitted that were directed to
|
|
the broadcast address. This does not include multicast packets
|
|
"
|
|
::= { atswitchEthPortMonEntry 5 }
|
|
|
|
atswitchTxMulticastFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The total number of packets transmitted that were directed to
|
|
a multicast address. This does not include packets addressed to the
|
|
broadcast address
|
|
"
|
|
::= { atswitchEthPortMonEntry 6 }
|
|
|
|
atswitchAddrDuplicate OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The number of address duplications seen on this port which is
|
|
secured on another port. If a source address is locked for a port and if
|
|
that address is eeen as source address on this port, then such occurances
|
|
of duplicate Address is noted.
|
|
"
|
|
::= { atswitchEthPortMonEntry 7 }
|
|
|
|
atswitchAddrMismatches OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
Address mismatches /address changes
|
|
the sum of :
|
|
1. The number of mismatches seen on a port between a securely assigned port address and the source address observed on the port.
|
|
Occurrence of this causes the TNETX3150 to suspend the port.
|
|
|
|
2. The number of times the TNETX3150 is required to assign or learn
|
|
an address for a port.
|
|
"
|
|
::= { atswitchEthPortMonEntry 8 }
|
|
|
|
atswitchRxOverruns OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
The number of frames lost due to lack of resources during frame reception. The counter is incremented when frame data cannot enter the RX fifo for whatever reason. Frames that overrun after entering the fifo also can be counted as RX discards if they are not cut-through.
|
|
"
|
|
::= { atswitchEthPortMonEntry 9 }
|
|
|
|
-- Ethernet Port Error Group.
|
|
--
|
|
-- The Error Port Error group contains statistics
|
|
-- measured by the concentator for each port. These statistics
|
|
-- take the form of free running counters that start from zero.
|
|
--
|
|
--
|
|
|
|
atswitchEthPortErrorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchEthPortErrorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
A list of statistics entries."
|
|
::= { atswitchEthPortError 1 }
|
|
|
|
atswitchEthPortErrorEntry OBJECT-TYPE
|
|
SYNTAX AtswitchEthPortErrorEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
A collection of statistics kept for a particular port.
|
|
"
|
|
INDEX {atswitchEthPortErrorId }
|
|
::= { atswitchEthPortErrorTable 1 }
|
|
|
|
AtswitchEthPortErrorEntry ::= SEQUENCE {
|
|
atswitchEthPortErrorId INTEGER ,
|
|
atswitchEthPortErrorRxBadFrames Counter,
|
|
atswitchEthPortErrorTxTotal Counter
|
|
}
|
|
|
|
atswitchEthPortErrorId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The relative position of a port within a switch starting with 1.
|
|
"
|
|
::= { atswitchEthPortErrorEntry 1 }
|
|
|
|
|
|
atswitchEthPortErrorRxBadFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
The counter is incremented when a bad frame was received
|
|
on this port.
|
|
"
|
|
::= { atswitchEthPortErrorEntry 2 }
|
|
|
|
|
|
atswitchEthPortErrorTxTotal OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "
|
|
Total number of error resulted from transmit operations
|
|
on this port.
|
|
"
|
|
::= { atswitchEthPortErrorEntry 3}
|
|
|
|
-- atswitchFwdVlanGroup This Group is Mac addresses on VLANs.
|
|
-- atswitchFwdVlanGroup OBJECT IDENTIFIER ::= { atswitchMib 7}
|
|
--
|
|
atswitchFwdVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchFwdVlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This tables lists Mac Addresses lexicographically from the forwarding table and also the information about the Vlan/Vlan which this MAC address belongs to.
|
|
"
|
|
::= { atswitchFwdVlanGroup 1 }
|
|
|
|
atswitchFwdVlanEntry OBJECT-TYPE
|
|
SYNTAX AtswitchFwdVlanEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Entry in the atswitchFwdVlanTable.
|
|
"
|
|
INDEX { atswitchFwdVlanMACAddr }
|
|
::= { atswitchFwdVlanTable 1 }
|
|
|
|
AtswitchFwdVlanEntry ::=
|
|
SEQUENCE {
|
|
atswitchFwdVlanMACAddr
|
|
MacAddress,
|
|
atswitchFwdVlanVlanId
|
|
INTEGER,
|
|
atswitchFwdVlanAge
|
|
INTEGER,
|
|
atswitchFwdVlanStatus
|
|
INTEGER,
|
|
atswitchFwdVlanPort
|
|
INTEGER
|
|
}
|
|
|
|
atswitchFwdVlanMACAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the MAC Address associated
|
|
with this entry."
|
|
::= { atswitchFwdVlanEntry 1 }
|
|
|
|
atswitchFwdVlanVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the Vlan/Vlan which MAC Address
|
|
defined by the atswitchFwdMACAddr is associated with.
|
|
"
|
|
::= { atswitchFwdVlanEntry 2 }
|
|
|
|
atswitchFwdVlanAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current Age of the MACAddr in the Forwarding Table.It Starts
|
|
with 0 and if not heard it increments to some value until it
|
|
hears from it and if not heard before reaching Max value, it will purge this entry.
|
|
"
|
|
::= { atswitchFwdVlanEntry 3 }
|
|
|
|
|
|
atswitchFwdVlanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
active(2),
|
|
other (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of this entry.
|
|
The meanings of the values are:
|
|
|
|
inactive(1) : this entry is not longer valid
|
|
(e.g., it was learned but has since
|
|
aged-out), but has not yet been
|
|
flushed from the table.
|
|
|
|
|
|
active(2) : the value of the corresponding
|
|
instance of atswitchFwdVlanPort was
|
|
active, and is being used.
|
|
|
|
other(3) : none of the following.
|
|
"
|
|
|
|
::= { atswitchFwdVlanEntry 4 }
|
|
|
|
atswitchFwdVlanPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Either the value '0', or the port number of the
|
|
port on which a frame having a source address
|
|
equal to the value of the corresponding instance
|
|
of atswitchFwdVlanMACAddr has been seen. A value of
|
|
'0' indicates that the port number has not been
|
|
learned but that the bridge does have some
|
|
forwarding/filtering information about this
|
|
address.
|
|
Implementors are encouraged to assign the port
|
|
value to this object whenever it is learned even
|
|
for addresses for which the corresponding value of
|
|
atswitchFwdVlanStatus is not learned(3).
|
|
"
|
|
::= { atswitchFwdVlanEntry 5 }
|
|
|
|
|
|
-- atiBridgeMib OBJECT IDENTIFIER ::= { atswitchMib 10 }
|
|
|
|
|
|
-- groups in the Bridge MIB
|
|
|
|
-- atswitchBrBase OBJECT IDENTIFIER ::= { atswitchBridgeMib 1 }
|
|
|
|
-- atswitchBrStp OBJECT IDENTIFIER ::= { atswitchBridgeMib 2 }
|
|
|
|
-- atswitchBrTp OBJECT IDENTIFIER ::= { atswitchBridgeMib 3 }
|
|
|
|
|
|
-- the atswitchBrBase Table
|
|
|
|
atswitchBrBaseTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchBrBaseEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of basic bridge information."
|
|
::= { atswitchBrBase 1 }
|
|
|
|
atswitchBrBaseEntry OBJECT-TYPE
|
|
SYNTAX AtswitchBrBaseEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the atswitchBrBaseTable."
|
|
INDEX { atswitchBrBaseLanId }
|
|
::= { atswitchBrBaseTable 1 }
|
|
|
|
AtswitchBrBaseEntry ::=
|
|
SEQUENCE {
|
|
atswitchBrBaseLanId
|
|
INTEGER,
|
|
atswitchBrBaseBridgeAddress
|
|
MacAddress,
|
|
atswitchBrBaseNumPorts
|
|
INTEGER,
|
|
atswitchBrBaseType
|
|
INTEGER
|
|
}
|
|
|
|
atswitchBrBaseLanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object uniquely identifies the lan or
|
|
Virtual lan."
|
|
::= { atswitchBrBaseEntry 1 }
|
|
|
|
atswitchBrBaseBridgeAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC address used by this bridge when it must
|
|
be referred to in a unique fashion. It is
|
|
recommended that this be the numerically smallest
|
|
MAC address of all ports that belong to this
|
|
bridge. However it is only required to be unique.
|
|
When concatenated with atswitchBrStpPriority a unique
|
|
BridgeIdentifier is formed which is used in the
|
|
Spanning Tree Protocol."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5"
|
|
::= { atswitchBrBaseEntry 2 }
|
|
|
|
atswitchBrBaseNumPorts OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ports controlled by this bridging
|
|
entity."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.4.1.1.3"
|
|
::= { atswitchBrBaseEntry 3 }
|
|
|
|
atswitchBrBaseType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
transparent-only(2),
|
|
sourceroute-only(3),
|
|
srt(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates what type of bridging this bridge can
|
|
perform. If a bridge is actually performing a
|
|
certain type of bridging this will be indicated by
|
|
entries in the port table for the given type."
|
|
::= { atswitchBrBaseEntry 4 }
|
|
|
|
-- The Generic Bridge Port Table
|
|
|
|
atswitchBrBasePortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchBrBasePortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table that contains generic information about
|
|
every port that is associated with this bridge.
|
|
Transparent, source-route, and srt ports are
|
|
included."
|
|
::= { atswitchBrBase 4 }
|
|
|
|
atswitchBrBasePortEntry OBJECT-TYPE
|
|
SYNTAX AtswitchBrBasePortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of information for each port of the
|
|
bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.4.2, 6.6.1"
|
|
INDEX { atswitchBrBasePortLanId, atswitchBrBasePort }
|
|
::= { atswitchBrBasePortTable 1 }
|
|
|
|
|
|
AtswitchBrBasePortEntry ::=
|
|
SEQUENCE {
|
|
atswitchBrBasePortLanId
|
|
INTEGER,
|
|
atswitchBrBasePort
|
|
INTEGER,
|
|
atswitchBrBasePortIfIndex
|
|
INTEGER,
|
|
atswitchBrBasePortCircuit
|
|
OBJECT IDENTIFIER,
|
|
atswitchBrBasePortDelayExceededDiscards
|
|
Counter,
|
|
atswitchBrBasePortMtuExceededDiscards
|
|
Counter
|
|
}
|
|
|
|
atswitchBrBasePortLanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object uniquely identifies the lan or
|
|
Virtual lan."
|
|
::= { atswitchBrBasePortEntry 1 }
|
|
|
|
atswitchBrBasePort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains bridge management information."
|
|
::= { atswitchBrBasePortEntry 2 }
|
|
|
|
atswitchBrBasePortIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the instance of the ifIndex object,
|
|
defined in MIB-II, for the interface corresponding
|
|
to this port."
|
|
::= { atswitchBrBasePortEntry 3 }
|
|
|
|
atswitchBrBasePortCircuit OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"For a port which (potentially) has the same value
|
|
of atswitchBrBasePortIfIndex as another port on the
|
|
same bridge, this object contains the name of an
|
|
object instance unique to this port. For example,
|
|
in the case where multiple ports correspond one-
|
|
to-one with multiple X.25 virtual circuits, this
|
|
value might identify an (e.g., the first) object
|
|
instance associated with the X.25 virtual circuit
|
|
corresponding to this port.
|
|
|
|
For a port which has a unique value of
|
|
atswitchBrBasePortIfIndex, this object can have the
|
|
value { 0 0 }."
|
|
::= { atswitchBrBasePortEntry 4 }
|
|
|
|
atswitchBrBasePortDelayExceededDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames discarded by this port due
|
|
to excessive transit delay through the bridge. It
|
|
is incremented by both transparent and source
|
|
route bridges."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.6.1.1.3"
|
|
::= { atswitchBrBasePortEntry 5 }
|
|
|
|
atswitchBrBasePortMtuExceededDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames discarded by this port due
|
|
to an excessive size. It is incremented by both
|
|
transparent and source route bridges."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.6.1.1.3"
|
|
::= { atswitchBrBasePortEntry 6 }
|
|
|
|
|
|
-- the atswitchBrStp group
|
|
|
|
-- Implementation of the atswitchBrStp group is optional. It is
|
|
-- implemented by those bridges that support the Spanning Tree
|
|
-- Protocol.
|
|
|
|
|
|
atswitchBrStpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchBrStpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of bridge spanning tree information."
|
|
::= { atswitchBrStp 1 }
|
|
|
|
atswitchBrStpEntry OBJECT-TYPE
|
|
SYNTAX AtswitchBrStpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the atswitchBrStpTable."
|
|
INDEX { atswitchBrStpLanId }
|
|
::= { atswitchBrStpTable 1 }
|
|
|
|
AtswitchBrStpEntry ::=
|
|
SEQUENCE {
|
|
atswitchBrStpLanId
|
|
INTEGER,
|
|
atswitchBrStpProtocolSpecification
|
|
INTEGER,
|
|
atswitchBrStpPriority
|
|
INTEGER,
|
|
atswitchBrStpTimeSinceTopologyChange
|
|
TimeTicks,
|
|
atswitchBrStpTopChanges
|
|
Counter,
|
|
atswitchBrStpDesignatedRoot
|
|
BridgeId,
|
|
atswitchBrStpRootCost
|
|
INTEGER,
|
|
atswitchBrStpRootPort
|
|
INTEGER,
|
|
atswitchBrStpMaxAge
|
|
Timeout,
|
|
atswitchBrStpHelloTime
|
|
Timeout,
|
|
atswitchBrStpHoldTime
|
|
INTEGER,
|
|
atswitchBrStpForwardDelay
|
|
Timeout,
|
|
atswitchBrStpBridgeMaxAge
|
|
Timeout,
|
|
atswitchBrStpBridgeHelloTime
|
|
Timeout,
|
|
atswitchBrStpBridgeForwardDelay
|
|
Timeout
|
|
}
|
|
|
|
atswitchBrStpLanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object uniquely identifies the lan or
|
|
Virtual lan."
|
|
::= { atswitchBrStpEntry 1 }
|
|
|
|
atswitchBrStpProtocolSpecification OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
decLb100(2),
|
|
ieee8021d(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An indication of what version of the Spanning
|
|
Tree Protocol is being run. The value
|
|
'decLb100(2)' indicates the DEC LANbridge 100
|
|
Spanning Tree protocol. IEEE 802.1d
|
|
implementations will return 'ieee8021d(3)'. If
|
|
future versions of the IEEE Spanning Tree Protocol
|
|
are released that are incompatible with the
|
|
current version a new value will be defined."
|
|
::= { atswitchBrStpEntry 2 }
|
|
|
|
atswitchBrStpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the write-able portion of the Bridge
|
|
ID, i.e., the first two octets of the (8 octet
|
|
long) Bridge ID. The other (last) 6 octets of the
|
|
Bridge ID are given by the value of
|
|
atswitchBrBaseBridgeAddress."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.7"
|
|
::= { atswitchBrStpEntry 3 }
|
|
|
|
atswitchBrStpTimeSinceTopologyChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time (in hundredths of a second) since the
|
|
last time a topology change was detected by the
|
|
bridge entity."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|
::= { atswitchBrStpEntry 4 }
|
|
|
|
atswitchBrStpTopChanges OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of topology changes detected by
|
|
this bridge since the management entity was last
|
|
reset or initialized."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.8.1.1.3"
|
|
::= { atswitchBrStpEntry 5 }
|
|
|
|
atswitchBrStpDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The bridge identifier of the root of the spanning
|
|
tree as determined by the Spanning Tree Protocol
|
|
as executed by this node. This value is used as
|
|
the Root Identifier parameter in all Configuration
|
|
Bridge PDUs originated by this node."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.1"
|
|
::= { atswitchBrStpEntry 6 }
|
|
|
|
atswitchBrStpRootCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The cost of the path to the root as seen from
|
|
this bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.2"
|
|
::= { atswitchBrStpEntry 7 }
|
|
|
|
atswitchBrStpRootPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port number of the port which offers the
|
|
lowest cost path from this bridge to the root
|
|
bridge."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.3"
|
|
::= { atswitchBrStpEntry 8 }
|
|
|
|
atswitchBrStpMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum age of Spanning Tree Protocol
|
|
information learned from the network on any port
|
|
before it is discarded, in units of hundredths of
|
|
a second. This is the actual value that this
|
|
bridge is currently using."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.4"
|
|
::= { atswitchBrStpEntry 9 }
|
|
|
|
atswitchBrStpHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of time between the transmission of
|
|
Configuration bridge PDUs by this node on any port
|
|
when it is the root of the spanning tree or trying
|
|
to become so, in units of hundredths of a second.
|
|
This is the actual value that this bridge is
|
|
currently using."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.5"
|
|
::= { atswitchBrStpEntry 10 }
|
|
|
|
atswitchBrStpHoldTime OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This time value determines the interval length
|
|
during which no more than two Configuration bridge
|
|
PDUs shall be transmitted by this node, in units
|
|
of hundredths of a second."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.14"
|
|
::= { atswitchBrStpEntry 11 }
|
|
|
|
atswitchBrStpForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This time value, measured in units of hundredths
|
|
of a second, controls how fast a port changes its
|
|
spanning state when moving towards the Forwarding
|
|
state. The value determines how long the port
|
|
stays in each of the Listening and Learning
|
|
states, which precede the Forwarding state. This
|
|
value is also used, when a topology change has
|
|
been detected and is underway, to age all dynamic
|
|
entries in the Forwarding Database. [Note that
|
|
this value is the one that this bridge is
|
|
currently using, in contrast to
|
|
atswitchBrStpBridgeForwardDelay which is the value that
|
|
this bridge and all others would start using
|
|
if/when this bridge were to become the root.]"
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.6"
|
|
::= { atswitchBrStpEntry 12 }
|
|
|
|
atswitchBrStpBridgeMaxAge OBJECT-TYPE
|
|
SYNTAX Timeout (600..4000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value that all bridges use for MaxAge when
|
|
this bridge is acting as the root. Note that
|
|
802.1D-1990 specifies that the range for this
|
|
parameter is related to the value of
|
|
atswitchBrStpBridgeHelloTime. The granularity of this
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|
An agent may return a badValue error if a set is
|
|
attempted to a value which is not a whole number
|
|
of seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.8"
|
|
::= { atswitchBrStpEntry 13 }
|
|
|
|
atswitchBrStpBridgeHelloTime OBJECT-TYPE
|
|
SYNTAX Timeout (100..1000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value that all bridges use for HelloTime when
|
|
this bridge is acting as the root. The
|
|
granularity of this timer is specified by 802.1D-
|
|
1990 to be 1 second. An agent may return a
|
|
badValue error if a set is attempted to a value
|
|
which is not a whole number of seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.9"
|
|
::= { atswitchBrStpEntry 14 }
|
|
|
|
atswitchBrStpBridgeForwardDelay OBJECT-TYPE
|
|
SYNTAX Timeout (400..3000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value that all bridges use for ForwardDelay
|
|
when this bridge is acting as the root. Note that
|
|
802.1D-1990 specifies that the range for this
|
|
parameter is related to the value of
|
|
atswitchBrStpBridgeMaxAge. The granularity of this
|
|
timer is specified by 802.1D-1990 to be 1 second.
|
|
An agent may return a badValue error if a set is
|
|
attempted to a value which is not a whole number
|
|
of seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.3.10"
|
|
::= { atswitchBrStpEntry 15 }
|
|
|
|
|
|
-- The Spanning Tree Port Table
|
|
|
|
atswitchBrStpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchBrStpPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table that contains port-specific information
|
|
for the Spanning Tree Protocol."
|
|
::= { atswitchBrStp 15 }
|
|
|
|
atswitchBrStpPortEntry OBJECT-TYPE
|
|
SYNTAX AtswitchBrStpPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of information maintained by every port
|
|
about the Spanning Tree Protocol state for that
|
|
port."
|
|
INDEX { atswitchBrStpPortLanId, atswitchBrStpPort }
|
|
::= { atswitchBrStpPortTable 1 }
|
|
|
|
AtswitchBrStpPortEntry ::=
|
|
SEQUENCE {
|
|
atswitchBrStpPortLanId
|
|
INTEGER,
|
|
atswitchBrStpPort
|
|
INTEGER,
|
|
atswitchBrStpPortPriority
|
|
INTEGER,
|
|
atswitchBrStpPortState
|
|
INTEGER,
|
|
atswitchBrStpPortEnable
|
|
INTEGER,
|
|
atswitchBrStpPortPathCost
|
|
INTEGER,
|
|
atswitchBrStpPortDesignatedRoot
|
|
BridgeId,
|
|
atswitchBrStpPortDesignatedCost
|
|
INTEGER,
|
|
atswitchBrStpPortDesignatedBridge
|
|
BridgeId,
|
|
atswitchBrStpPortDesignatedPort
|
|
OCTET STRING,
|
|
atswitchBrStpPortForwardTransitions
|
|
Counter
|
|
}
|
|
|
|
atswitchBrStpPortLanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object uniquely identifies the lan or
|
|
Virtual lan."
|
|
::= { atswitchBrStpPortEntry 1 }
|
|
|
|
atswitchBrStpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains Spanning Tree Protocol management
|
|
information."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.8.2.1.2"
|
|
::= { atswitchBrStpPortEntry 2 }
|
|
|
|
atswitchBrStpPortPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the priority field which is
|
|
contained in the first (in network byte order)
|
|
octet of the (2 octet long) Port ID. The other
|
|
octet of the Port ID is given by the value of
|
|
atswitchBrStpPort."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.1"
|
|
::= { atswitchBrStpPortEntry 3 }
|
|
|
|
atswitchBrStpPortState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5),
|
|
broken(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port's current state as defined by
|
|
application of the Spanning Tree Protocol. This
|
|
state controls what action a port takes on
|
|
reception of a frame. If the bridge has detected
|
|
a port that is malfunctioning it will place that
|
|
port into the broken(6) state. For ports which
|
|
are disabled (see atswitchBrStpPortEnable), this object
|
|
will have a value of disabled(1)."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.2"
|
|
::= { atswitchBrStpPortEntry 4 }
|
|
|
|
atswitchBrStpPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The enabled/disabled status of the port."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.2"
|
|
::= { atswitchBrStpPortEntry 5 }
|
|
|
|
atswitchBrStpPortPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1990 recommends that the
|
|
default value of this parameter be in inverse
|
|
proportion to the speed of the attached LAN."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.3"
|
|
::= { atswitchBrStpPortEntry 6 }
|
|
|
|
atswitchBrStpPortDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the Bridge
|
|
recorded as the Root in the Configuration BPDUs
|
|
transmitted by the Designated Bridge for the
|
|
segment to which the port is attached."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.4"
|
|
::= { atswitchBrStpPortEntry 7 }
|
|
|
|
atswitchBrStpPortDesignatedCost OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The path cost of the Designated Port of the
|
|
segment connected to this port. This value is
|
|
compared to the Root Path Cost field in received
|
|
bridge PDUs."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.5"
|
|
::= { atswitchBrStpPortEntry 8 }
|
|
|
|
atswitchBrStpPortDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Bridge Identifier of the bridge which this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.6"
|
|
::= { atswitchBrStpPortEntry 9 }
|
|
|
|
atswitchBrStpPortDesignatedPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Port Identifier of the port on the Designated
|
|
Bridge for this port's segment."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 4.5.5.7"
|
|
::= { atswitchBrStpPortEntry 10 }
|
|
|
|
atswitchBrStpPortForwardTransitions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state."
|
|
::= { atswitchBrStpPortEntry 11 }
|
|
|
|
|
|
-- the atswitchBrTp group
|
|
|
|
-- Implementation of the atswitchBrTp group is optional. It is
|
|
-- implemented by those bridges that support the transparent
|
|
-- bridging mode. A transparent or SRT bridge will implement
|
|
-- this group.
|
|
|
|
|
|
atswitchBrTpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchBrTpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Table of transparent bridging information."
|
|
::= { atswitchBrTp 1 }
|
|
|
|
atswitchBrTpEntry OBJECT-TYPE
|
|
SYNTAX AtswitchBrTpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the atswitchBrTpTable."
|
|
INDEX { atswitchBrTpLanId }
|
|
::= { atswitchBrTpTable 1 }
|
|
|
|
AtswitchBrTpEntry ::=
|
|
SEQUENCE {
|
|
atswitchBrTpLanId
|
|
INTEGER,
|
|
atswitchBrTpLearnedEntryDiscards
|
|
Counter,
|
|
atswitchBrTpAgingTime
|
|
INTEGER
|
|
}
|
|
|
|
atswitchBrTpLanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object uniquely identifies the lan or
|
|
Virtual lan."
|
|
::= { atswitchBrTpEntry 1 }
|
|
|
|
atswitchBrTpLearnedEntryDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of Forwarding Database entries,
|
|
which have been or would have been learnt, but
|
|
have been discarded due to a lack of space to
|
|
store them in the Forwarding Database. If this
|
|
counter is increasing, it indicates that the
|
|
Forwarding Database is regularly becoming full (a
|
|
condition which has unpleasant performance effects
|
|
on the subnetwork). If this counter has a
|
|
significant value but is not presently increasing,
|
|
it indicates that the problem has been occurring
|
|
but is not persistent."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.7.1.1.3"
|
|
::= { atswitchBrTpEntry 2 }
|
|
|
|
atswitchBrTpAgingTime OBJECT-TYPE
|
|
SYNTAX INTEGER (10..1000000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The timeout period in seconds for aging out
|
|
dynamically learned forwarding information.
|
|
802.1D-1990 recommends a default of 300 seconds."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.7.1.1.3"
|
|
::= { atswitchBrTpEntry 3 }
|
|
|
|
|
|
-- The Forwarding Database for Transparent Bridges
|
|
|
|
atswitchBrTpFdbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchBrTpFdbEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table that contains information about unicast
|
|
entries for which the bridge has forwarding and/or
|
|
filtering information. This information is used
|
|
by the transparent bridging function in
|
|
determining how to propagate a received frame."
|
|
::= { atswitchBrTp 3 }
|
|
|
|
atswitchBrTpFdbEntry OBJECT-TYPE
|
|
SYNTAX AtswitchBrTpFdbEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Information about a specific unicast MAC address
|
|
for which the bridge has some forwarding and/or
|
|
filtering information."
|
|
INDEX { atswitchBrTpFdbLanId, atswitchBrTpFdbAddress }
|
|
::= { atswitchBrTpFdbTable 1 }
|
|
|
|
AtswitchBrTpFdbEntry ::=
|
|
SEQUENCE {
|
|
atswitchBrTpFdbLanId
|
|
INTEGER,
|
|
atswitchBrTpFdbAddress
|
|
MacAddress,
|
|
atswitchBrTpFdbPort
|
|
INTEGER,
|
|
atswitchBrTpFdbStatus
|
|
INTEGER
|
|
}
|
|
|
|
atswitchBrTpFdbLanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object uniquely identifies the lan or
|
|
Virtual lan."
|
|
::= { atswitchBrTpFdbEntry 1 }
|
|
|
|
atswitchBrTpFdbAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unicast MAC address for which the bridge has
|
|
forwarding and/or filtering information."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
|
|
::= { atswitchBrTpFdbEntry 2 }
|
|
|
|
atswitchBrTpFdbPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Either the value '0', or the port number of the
|
|
port on which a frame having a source address
|
|
equal to the value of the corresponding instance
|
|
of atswitchBrTpFdbAddress has been seen. A value of
|
|
'0' indicates that the port number has not been
|
|
learned but that the bridge does have some
|
|
forwarding/filtering information about this
|
|
address .
|
|
Implementors are encouraged to assign the port
|
|
value to this object whenever it is learned even
|
|
for addresses for which the corresponding value of
|
|
atswitchBrTpFdbStatus is not learned(3)."
|
|
::= { atswitchBrTpFdbEntry 3 }
|
|
|
|
atswitchBrTpFdbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(1),
|
|
active (2),
|
|
other (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The status of this entry.
|
|
The meanings of the values are:
|
|
|
|
inactive(1) : this entry is not longer valid
|
|
(e.g., it was learned but has since
|
|
aged-out), but has not yet been
|
|
flushed from the table.
|
|
|
|
active(2) : the value of the corresponding
|
|
instance of atswitchBrTpFdbPort was
|
|
active, and is being used.
|
|
|
|
other(3) : none of the following. This would
|
|
include the case where some other
|
|
MIB object (not the corresponding
|
|
instance of atswitchBrTpFdbPort ) is
|
|
being used to determine if and how
|
|
frames addressed to the value of
|
|
the corresponding instance of
|
|
atswitchBrTpFdbAddress are being
|
|
forwarded.
|
|
"
|
|
::= { atswitchBrTpFdbEntry 4 }
|
|
|
|
-- Port Table for Transparent Bridges
|
|
|
|
atswitchBrTpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchBrTpPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table that contains information about every
|
|
port that is associated with this transparent
|
|
bridge."
|
|
::= { atswitchBrTp 4 }
|
|
|
|
atswitchBrTpPortEntry OBJECT-TYPE
|
|
SYNTAX AtswitchBrTpPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of information for each port of a
|
|
transparent bridge."
|
|
INDEX { atswitchBrTpPortLanId, atswitchBrTpPort }
|
|
::= { atswitchBrTpPortTable 1 }
|
|
|
|
AtswitchBrTpPortEntry ::=
|
|
SEQUENCE {
|
|
atswitchBrTpPortLanId
|
|
INTEGER,
|
|
atswitchBrTpPort
|
|
INTEGER,
|
|
atswitchBrTpPortMaxInfo
|
|
INTEGER,
|
|
atswitchBrTpPortInFrames
|
|
Counter,
|
|
atswitchBrTpPortOutFrames
|
|
Counter,
|
|
atswitchBrTpPortInDiscards
|
|
Counter
|
|
}
|
|
|
|
atswitchBrTpPortLanId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object uniquely identifies the lan or
|
|
Virtual lan."
|
|
::= { atswitchBrTpPortEntry 1 }
|
|
|
|
atswitchBrTpPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The port number of the port for which this entry
|
|
contains Transparent bridging management
|
|
information."
|
|
::= { atswitchBrTpPortEntry 2 }
|
|
|
|
-- It would be nice if we could use ifMtu as the size of the
|
|
-- largest INFO field, but we can't because ifMtu is defined
|
|
-- to be the size that the (inter-)network layer can use which
|
|
-- can differ from the MAC layer (especially if several layers
|
|
-- of encapsulation are used).
|
|
|
|
atswitchBrTpPortMaxInfo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum size of the INFO (non-MAC) field that
|
|
this port will receive or transmit."
|
|
::= { atswitchBrTpPortEntry 3 }
|
|
|
|
atswitchBrTpPortInFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames that have been received by
|
|
this port from its segment. Note that a frame
|
|
received on the interface corresponding to this
|
|
port is only counted by this object if and only if
|
|
it is for a protocol being processed by the local
|
|
bridging function, including bridge management
|
|
frames."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.6.1.1.3"
|
|
::= { atswitchBrTpPortEntry 4 }
|
|
|
|
atswitchBrTpPortOutFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of frames that have been transmitted
|
|
by this port to its segment. Note that a frame
|
|
transmitted on the interface corresponding to this
|
|
port is only counted by this object if and only if
|
|
it is for a protocol being processed by the local
|
|
bridging function, including bridge management
|
|
frames."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.6.1.1.3"
|
|
::= { atswitchBrTpPortEntry 5 }
|
|
|
|
atswitchBrTpPortInDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Count of valid frames received which were
|
|
discarded (i.e., filtered) by the Forwarding
|
|
Process."
|
|
REFERENCE
|
|
"IEEE 802.1D-1990: Section 6.6.1.1.3"
|
|
::= { atswitchBrTpPortEntry 6 }
|
|
|
|
-- Static MAC address Group
|
|
-- atswitchStaticMACGroup OBJECT IDENTIFIER ::= { atswitchMib 12}
|
|
|
|
|
|
atswitchStaticMACTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchStaticMACEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This tables lists Mac Addresses lexicographically from the Static
|
|
table which binds MAC addresses to ports on the switch.
|
|
"
|
|
::= { atswitchStaticMACGroup 1 }
|
|
|
|
atswitchStaticMACEntry OBJECT-TYPE
|
|
SYNTAX AtswitchStaticMACEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" Entry in the atswitchStaticMACTable.
|
|
"
|
|
INDEX { atswitchStaticMACAddress }
|
|
::= { atswitchStaticMACTable 1 }
|
|
|
|
AtswitchStaticMACEntry ::=
|
|
SEQUENCE {
|
|
atswitchStaticMACAddress
|
|
MacAddress,
|
|
atswitchStaticMACPortNumbers
|
|
DisplayString,
|
|
atswitchStaticMACVlan
|
|
INTEGER
|
|
}
|
|
|
|
atswitchStaticMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the MAC Address associated
|
|
with Static MAC Table."
|
|
::= { atswitchStaticMACEntry 1 }
|
|
|
|
atswitchStaticMACPortNumbers OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the Ports for which the above MAC
|
|
address is associated Statically in Static MAC Table. This
|
|
Object could take the port numbers as the Static Address added
|
|
can be Multicast addresses. This Object is a DisplayString
|
|
So, the input for example would be 1,5,6,8,9
|
|
"
|
|
::= { atswitchStaticMACEntry 2 }
|
|
|
|
atswitchStaticMACVlan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Static MAC Address to be added can also be confined
|
|
to a Vlan also. If the Port does not belong to that Vlan. the Port is forced to be moved to that Vlan.
|
|
"
|
|
::= { atswitchStaticMACEntry 3 }
|
|
|
|
|
|
|
|
-- PortMACTable
|
|
|
|
atswitchPortMACTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchPortMACEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table that contains information about unicast
|
|
entries seen on ports.
|
|
"
|
|
::= { atswitchPortMacAddrGroup 1 }
|
|
|
|
atswitchPortMACEntry OBJECT-TYPE
|
|
SYNTAX AtswitchPortMACEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Information about a specific unicast MAC address
|
|
seen on ports.
|
|
"
|
|
INDEX {atswitchPortMACAddress , atswitchPortMACPort }
|
|
::= { atswitchPortMACTable 1 }
|
|
|
|
AtswitchPortMACEntry ::=
|
|
SEQUENCE {
|
|
atswitchPortMACAddress
|
|
MacAddress,
|
|
atswitchPortMACPort
|
|
INTEGER
|
|
}
|
|
|
|
atswitchPortMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unicast MAC address seen on this port.
|
|
"
|
|
::= { atswitchPortMACEntry 1 }
|
|
|
|
atswitchPortMACPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object identifies the port on which the
|
|
atswitchPortMACAddress was seen.
|
|
"
|
|
::= { atswitchPortMACEntry 2 }
|
|
--
|
|
|
|
atswitchDebugMallocLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtswitchMallocLogEntry
|
|
ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
" Dont care.
|
|
"
|
|
::= { atswitchDebugMallocLogGroup 1 }
|
|
|
|
atswitchMallocLogEntry OBJECT-TYPE
|
|
SYNTAX AtswitchMallocLogEntry
|
|
ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
" Entry in the atswitchDebugMallocLogEntry.
|
|
"
|
|
INDEX { atswitchDebugMallocLogIndex }
|
|
::= { atswitchDebugMallocLogTable 1 }
|
|
|
|
AtswitchMallocLogEntry ::=
|
|
SEQUENCE {
|
|
atswitchDebugMallocLogIndex
|
|
INTEGER,
|
|
atswitchDebugMallocLogCaller
|
|
INTEGER,
|
|
atswitchDebugMallocLogAddress
|
|
INTEGER
|
|
}
|
|
|
|
atswitchDebugMallocLogIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This is strictly for Debug reason and this object should
|
|
not be beleived as the correct number. This log is useful
|
|
for finding the memory leak which is stored in Leak_Table.
|
|
The Entry of this table is the address where malloc is
|
|
done and no free is done.
|
|
The size of this 6000.
|
|
"
|
|
::= { atswitchMallocLogEntry 1 }
|
|
|
|
atswitchDebugMallocLogCaller OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This is strictly for Debug reason and this object should
|
|
not be beleived as the correct number. This log is useful
|
|
for finding the memory leak which is stored in Leak_Table.
|
|
The Entry of this table is the caller address
|
|
who malloc'd .
|
|
The size of this 6000.
|
|
"
|
|
::= { atswitchMallocLogEntry 2 }
|
|
|
|
atswitchDebugMallocLogAddress OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"
|
|
This is strictly for Debug reason and this object should
|
|
not be beleived as the correct number. This log is useful
|
|
for finding the memory leak which is stored in Leak_Table.
|
|
The Entry of this table is the address where malloc is
|
|
done and no free is done.
|
|
The size of this 6000.
|
|
"
|
|
::= { atswitchMallocLogEntry 3 }
|
|
|
|
-- atswitchTrunkGroup OBJECT IDENTIFIER ::= { atswitchMib 14}
|
|
|
|
--atswitchTrunkTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF AtswitchTrunkEntry
|
|
-- ACCESS not-accessible
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "Table of basic Trunk Group configuration information."
|
|
-- ::= { atswitchTrunkGroup 1 }
|
|
--
|
|
--atswitchTrunkEntry OBJECT-TYPE
|
|
-- SYNTAX AtswitchTrunkEntry
|
|
-- ACCESS not-accessible
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "An entry in the Trunk config table."
|
|
-- INDEX { atswitchTrunkNumber }
|
|
-- ::= { atswitchTrunkTable 1 }
|
|
--
|
|
--AtswitchTrunkEntry ::=
|
|
-- SEQUENCE {
|
|
-- atswitchTrunkNumber
|
|
-- INTEGER,
|
|
-- atswitchTrunkPortNumbers
|
|
-- DisplayString
|
|
-- }
|
|
--
|
|
--atswitchTrunkNumber OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "This object identifies the Trunk number on the switch."
|
|
-- ::= { atswitchTrunkEntry 1 }
|
|
--
|
|
--atswitchTrunkPortNumbers OBJECT-TYPE
|
|
-- SYNTAX DisplayString
|
|
-- ACCESS read-write
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "This attribute associates the port numbers that participate
|
|
-- in this Trunk denoted bt the TrunkNumber . It is taken as
|
|
-- string input.
|
|
-- "
|
|
-- ::= { atswitchTrunkEntry 2 }
|
|
|
|
-- Traps for Security.
|
|
|
|
atswitchDuplicateMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
The Duplicate Mac address which is secured on
|
|
atswitchSecurePortNumber.
|
|
"
|
|
::= { atswitchTrapAttrGroup 1 }
|
|
|
|
atswitchIntruderMacAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
The Mac address of the Intruder as seen on port which is the
|
|
the next object
|
|
"
|
|
::= { atswitchTrapAttrGroup 2 }
|
|
|
|
atswitchSecuredPortNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"
|
|
This is the Port number which has the duplicate Address as the
|
|
secured address .
|
|
"
|
|
::= { atswitchTrapAttrGroup 3 }
|
|
|
|
-- Traps for use by Bridges
|
|
|
|
-- Traps for the Spanning Tree Protocol
|
|
|
|
newRoot TRAP-TYPE
|
|
ENTERPRISE alliedTelesyn
|
|
DESCRIPTION
|
|
"The newRoot trap indicates that the sending agent
|
|
has become the new root of the Spanning Tree; the
|
|
trap is sent by a bridge soon after its election
|
|
as the new root, e.g., upon expiration of the
|
|
Topology Change Timer immediately subsequent to
|
|
its election. Implementation of this trap is
|
|
optional."
|
|
::= 101
|
|
|
|
topologyChange TRAP-TYPE
|
|
ENTERPRISE alliedTelesyn
|
|
DESCRIPTION
|
|
"A topologyChange trap is sent by a bridge when
|
|
any of its configured ports transitions from the
|
|
Learning state to the Forwarding state, or from
|
|
the Forwarding state to the Blocking state. The
|
|
trap is not sent if a newRoot trap is sent for the
|
|
same transition. Implementation of this trap is
|
|
optional."
|
|
::= 102
|
|
|
|
intruderTrap TRAP-TYPE
|
|
ENTERPRISE alliedTelesyn
|
|
DESCRIPTION
|
|
"The intruderTrap trap indicates that there was a Intruder
|
|
was detected on the port shown as ifIndex.
|
|
"
|
|
::= 105
|
|
|
|
|
|
END
|