WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/zhone/ZhoneDsl-MIB

783 lines
22 KiB
Plaintext
Raw Blame History

--
-- phyDsl.mib
-- MIB generated by MG-SOFT Visual MIB Builder Version 1.8 Build 150
-- Thursday, May 11, 2000 at 13:50:08
--
ZhoneDsl-MIB DEFINITIONS ::= BEGIN
IMPORTS
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
Integer32, Gauge32, Counter32, OBJECT-TYPE,
MODULE-IDENTITY
FROM SNMPv2-SMI
VariablePointer
FROM SNMPv2-TC
ifIndex
FROM IF-MIB
zhoneDsl, zhoneModules
FROM Zhone
ZhoneRowStatus, ZhoneAdminString
FROM Zhone-TC;
zhoneDsl-MIB MODULE-IDENTITY
LAST-UPDATED "200005111753Z"
ORGANIZATION
"Zhone"
CONTACT-INFO
" Postal:
xxx
Zhone Technologies, Inc.
xxx address.
Fremont, Ca.
Toll-Free: 877-ZHONE20 (+1 877-946-6320)
Tel: +1 978-452-0571
Fax: +1 978-xxx-xxxx
E-mail: xxx@zhone.com
"
DESCRIPTION
"The MIB module to describe the Zhone specific
implementation of HDSL, HDSL2, SDSL and G.SHDSL"
REVISION "200004261753Z"
DESCRIPTION
"strawman structure"
::= { zhoneModules 3 }
--
-- Node definitions
--
--
-- This defines Zhone's MIB support for xDSL that currently do not have a
-- standard. The MIB consists of a generic line definition and sub-branches
-- that are applicable to a specific xDSL. There is one generic line definition
-- entry, from the zhoneDslLineTable, per xDSL modem. These entries are indexed
-- by ifIndex and correspond to an entry in the ifEntry table.
--
zhoneDslLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneDslLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains common attributes describing
DSL physical line interfaces for DSLs without a MIB
standard."
::= { zhoneDsl 1 }
zhoneDslLineEntry OBJECT-TYPE
SYNTAX ZhoneDslLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the zhoneDslLine Table."
INDEX { ifIndex }
::= { zhoneDslLineTable 1 }
ZhoneDslLineEntry ::=
SEQUENCE {
zhoneDslLineType
INTEGER,
zhoneDslLineCapabilities
BITS,
zhoneDslLineStatus
INTEGER,
zhoneDslUpLineRate
Gauge32,
zhoneDslDownLineRate
Gauge32,
zhoneDslLineConfigProfile
ZhoneAdminString,
zhoneDslLineAlarmProfile
ZhoneAdminString,
zhoneDslLineRowStatus
ZhoneRowStatus
}
zhoneDslLineType OBJECT-TYPE
SYNTAX INTEGER
{
hdsl(1),
hdsl2(2),
shdsl(3),
sdsl(96)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSL type. Many modem vendors allow software selection between
HDSL, HDSL2, SDSL and SHDSL. Using zhoneDslLineTypeSupported the user
can see what dsl option is available on this interface."
DEFVAL { hdsl2 }
::= { zhoneDslLineEntry 1 }
zhoneDslLineCapabilities OBJECT-TYPE
SYNTAX BITS
{
hdsl(1),
hdsl2(2),
shdsl(4),
sdsl(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSL types supported on this interface. This is a bit-map of possible
types. This variable can be used to determine zhoneDslLineType."
::= { zhoneDslLineEntry 2 }
zhoneDslLineStatus OBJECT-TYPE
SYNTAX INTEGER
{
down(1),
downloading(2),
activated(3),
training(4),
up(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSL modem status. Detailed modem state maybe available in the
status table. "
::= { zhoneDslLineEntry 3 }
zhoneDslUpLineRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSL upstream (cpe->co) line rate on this interface."
::= { zhoneDslLineEntry 4 }
zhoneDslDownLineRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DSL downstream (co->cpe) line rate on this interface."
::= { zhoneDslLineEntry 5 }
zhoneDslLineConfigProfile OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the
respective dsl configuration profile table. (Ex:
if zhoneDslLineType is HDSL2, then the profile identifies
an HDSL2 configuration profile.) It is assumed that all
profile names are unique to the system.
In the case which the
configuration profile has not been set, the
value will be set to `ZhoneDefault'. This is
a profile (by type) which will be persisted
and then able to be modified by a management
station in order to modify the DEFAULT
values.
"
::= { zhoneDslLineEntry 6 }
zhoneDslLineAlarmProfile OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object identifies the row in the
respective dsl alarm profile table. (Ex: if zhoneDslLineType is HDSL2
then the profile identifies an HDSL2 alarm profile.)
It is assumed that all profile names are unique to the system.
In the case where the
configuration profile has not been set, the
value will be set to `ZhoneDefault'.
"
::= { zhoneDslLineEntry 7 }
zhoneDslLineRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status in order to add an entry in this table.
The required fields to be added are: (ARE ALL THE DEFAULTS OKAY)
"
::= { zhoneDslLineEntry 8 }
--
-- The configuration profile used for HDSL2 lines.
--
zhoneHdsl2ConfigProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneHdsl2ConfigProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for HDSL2 configuration."
::= { zhoneDsl 3 }
zhoneHdsl2ConfigProfileEntry OBJECT-TYPE
SYNTAX ZhoneHdsl2ConfigProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the zhoneHdsl2ConfigProfile Table."
INDEX { IMPLIED zhoneHdsl2ConfigProfileName }
::= { zhoneHdsl2ConfigProfileTable 1 }
ZhoneHdsl2ConfigProfileEntry ::=
SEQUENCE {
zhoneHdsl2ConfigProfileName
ZhoneAdminString,
zhoneHdsl2ConfigUnitMode
INTEGER,
zhoneHdsl2ConfigTransmitPowerbackoffMode
INTEGER,
zhoneHdsl2ConfigDecoderCoeffA
Integer32,
zhoneHdsl2ConfigDecoderCoeffB
Integer32,
zhoneHdsl2ConfigFrameSyncWord
Integer32,
zhoneHdsl2ConfigStuffBits
Integer32,
zhoneHdsl2ConfigRowStatus
ZhoneRowStatus
}
zhoneHdsl2ConfigProfileName OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration profile name. Used by the zhoneHdsl2LineConfigProfile entry
to map zhoneDslLine Entry to the appropriate profile.
When `dynamic' profiles are implemented, the profile
name is user specified. Also, the system will always
provide a default profile whose name is `DEFVAL'.
When `static' profiles are implemented, there is an
one-to-one relationship between each line and its
profile. In which case, the profile name will
need to algorithmically represent the Line's ifIndex.
Therefore, the profile's name is a decimal zed string
of the ifIndex that is fixed-length (i.e., 10) with
leading zero(s). For example, the profile name for
ifIndex which equals '15' will be '0000000015'."
::= { zhoneHdsl2ConfigProfileEntry 1 }
zhoneHdsl2ConfigUnitMode OBJECT-TYPE
SYNTAX INTEGER
{
co(1),
cpe(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Unit is configured as the CO(central office)or CPE (customer premise)side."
DEFVAL { co }
::= { zhoneHdsl2ConfigProfileEntry 2 }
zhoneHdsl2ConfigTransmitPowerbackoffMode OBJECT-TYPE
SYNTAX INTEGER
{
backoff-disable(1),
backoff-enable(2),
no-change-backoff(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines if the transmit power backoff defined in HDSL2 standard
is used."
DEFVAL { backoff-disable }
::= { zhoneHdsl2ConfigProfileEntry 3 }
zhoneHdsl2ConfigDecoderCoeffA OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"21 bit value corresponding to the decoder coefficient A. The default is the ANSI HDSL2 default."
DEFVAL { '011101101000000000000'b }
::= { zhoneHdsl2ConfigProfileEntry 4 }
zhoneHdsl2ConfigDecoderCoeffB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"21 bit value corresponding to the decoder coefficient A. The default is the ANSI HDSL2 default."
DEFVAL { '011101101000000000000'b }
::= { zhoneHdsl2ConfigProfileEntry 5 }
zhoneHdsl2ConfigFrameSyncWord OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"10 bit frame sync word. The default is the HDSL2 standard."
DEFVAL { '0000101101'b }
::= { zhoneHdsl2ConfigProfileEntry 6 }
zhoneHdsl2ConfigStuffBits OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"4 bit stuff pattern. The default is the HDSL2 standard."
DEFVAL { '1111'b }
::= { zhoneHdsl2ConfigProfileEntry 7 }
zhoneHdsl2ConfigRowStatus OBJECT-TYPE
SYNTAX ZhoneRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status in order to create/delete rows.
For creation the following fields are required:"
::= { zhoneHdsl2ConfigProfileEntry 8 }
--
-- HDSL2 status entries. NOTE: the terms local and remote are used to
-- denote your unit and the peer on the other side of the loop.
--
zhoneHdsl2StatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneHdsl2StatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains HDSL2 specific line status information.
An entry into this table is automatically created whenever a
zhoneDslLineEntry is created and the type is HDSL2."
::= { zhoneDsl 4 }
zhoneHdsl2StatusEntry OBJECT-TYPE
SYNTAX ZhoneHdsl2StatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the zhoneHdsl2Status Table."
AUGMENTS { ifIndex }
::= { zhoneHdsl2StatusTable 1 }
ZhoneHdsl2StatusEntry ::=
SEQUENCE {
zhoneHdsl2DriftAlarm
INTEGER,
zhoneHdsl2FramerIBStatus
OCTET STRING,
zhoneHdsl2LocalPSDMaskStatus
Integer32,
zhoneHdsl2LoopAttenuation
Integer32,
zhoneHdsl2LossWordStatus
INTEGER,
zhoneHdsl2RmtPSDMaskStatus
Integer32,
zhoneHdsl2RmtCountryCode
Integer32,
zhoneHdsl2RmtVersion
Integer32,
zhoneHdsl2RmtProviderCode
Integer32,
zhoneHdsl2RmtVendorData
OCTET STRING,
zhoneHdsl2RmtTxEncoderA
Integer32,
zhoneHdsl2RmtTxEncoderB
Integer32,
zhoneHdsl2TipRingStatus
INTEGER,
zhoneHdsl2FrameSyncWord
Integer32,
zhoneHdsl2StuffBits
Integer32
}
zhoneHdsl2DriftAlarm OBJECT-TYPE
SYNTAX INTEGER
{
rx-clk-alarm(1),
tx-clk-alarm(2),
tx-rx-clk-alarm(3),
no-drift-alarm(4),
not-applicable(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates that the framer automatically attempted to adjust for clock
drift. This is not applicable for ATM."
::= { zhoneHdsl2StatusEntry 1 }
zhoneHdsl2FramerIBStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the segd,sega,uib and losd bits. The format of the octet is:
x x x x segd sega uib losd."
::= { zhoneHdsl2StatusEntry 2 }
zhoneHdsl2LocalPSDMaskStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns a number corresponding to the transmit power backoff requested
by the local unit."
::= { zhoneHdsl2StatusEntry 3 }
zhoneHdsl2LoopAttenuation OBJECT-TYPE
SYNTAX Integer32
UNITS "tenth DB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Estimation of the loop attenuation in tenths of a DB.
by the local unit."
::= { zhoneHdsl2StatusEntry 4 }
zhoneHdsl2LossWordStatus OBJECT-TYPE
SYNTAX INTEGER
{
no-lossw-defect(1),
lossw-defect(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates loss of sync."
::= { zhoneHdsl2StatusEntry 5 }
zhoneHdsl2RmtPSDMaskStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns a number corresponding to the transmit power backoff requested
by the remote unit."
::= { zhoneHdsl2StatusEntry 6 }
zhoneHdsl2RmtCountryCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ANSI HDSL2 Country code of the remote unit."
::= { zhoneHdsl2StatusEntry 7 }
zhoneHdsl2RmtVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"HDSL2 version of the remote unit."
::= { zhoneHdsl2StatusEntry 8 }
zhoneHdsl2RmtProviderCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provider word of the remote unit."
::= { zhoneHdsl2StatusEntry 9 }
zhoneHdsl2RmtVendorData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote unit's vendor-provided data."
::= { zhoneHdsl2StatusEntry 10 }
zhoneHdsl2RmtTxEncoderA OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote unit's 21 bit encoder coefficient A"
::= { zhoneHdsl2StatusEntry 11 }
zhoneHdsl2RmtTxEncoderB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote unit's 21 bit encoder coefficient B"
::= { zhoneHdsl2StatusEntry 12 }
zhoneHdsl2TipRingStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
reverse(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the tip and ring points from the local unit match the
tip and ring points of the remote."
::= { zhoneHdsl2StatusEntry 13 }
zhoneHdsl2FrameSyncWord OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 10 bit number indicating the frame sync word used. LSB justified"
::= { zhoneHdsl2StatusEntry 14 }
zhoneHdsl2StuffBits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 4 bit number for the stuff bits. LSB justified."
::= { zhoneHdsl2StatusEntry 15 }
-- Information tracked for every DSL link. Table is augmented to the
-- zhoneDslLineEntry
--
--
zhoneDslPerfDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneDslPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides one row for each modem interface."
::= { zhoneDsl 5 }
zhoneDslPerfDataEntry OBJECT-TYPE
SYNTAX ZhoneDslPerfDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in zhoneDslPerfDataTable."
AUGMENTS { zhoneDslLineEntry }
::= { zhoneDslPerfDataTable 1 }
ZhoneDslPerfDataEntry ::=
SEQUENCE {
zhoneDslPerfLofs
Counter32,
zhoneDslPerfLoss
Counter32,
zhoneDslPerfLols
Counter32,
zhoneDslPerfInits
Counter32,
zhoneDslPerfCur15MinTimeElapsed
Gauge32,
zhoneDslPerfCur15MinLofs
Gauge32,
zhoneDslPerfCur15MinLoss
Gauge32,
zhoneDslPerfCur15MinLols
Gauge32,
zhoneDslPerfCur15MinInits
Gauge32
}
zhoneDslPerfLofs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of Loss of Framing failures since agent reset."
::= { zhoneDslPerfDataEntry 1 }
zhoneDslPerfLoss OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of Loss of Signal failures since agent reset."
::= { zhoneDslPerfDataEntry 2 }
zhoneDslPerfLols OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of Loss of Link failures since agent reset."
::= { zhoneDslPerfDataEntry 3 }
zhoneDslPerfInits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the line initialization attempts since agent reset. Includes
both successful and failed attempts."
::= { zhoneDslPerfDataEntry 4 }
zhoneDslPerfCur15MinTimeElapsed OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds elapsed since the start of the
current measurement period."
::= { zhoneDslPerfDataEntry 5 }
zhoneDslPerfCur15MinLofs OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of Loss of Framing failures in the current 15 minute interval."
::= { zhoneDslPerfDataEntry 6 }
zhoneDslPerfCur15MinLoss OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in the current 15 minute interval when there was a Loss of Signal."
::= { zhoneDslPerfDataEntry 7 }
zhoneDslPerfCur15MinLols OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of seconds in the current 15 minute interval when there was of Loss of Link."
::= { zhoneDslPerfDataEntry 8 }
zhoneDslPerfCur15MinInits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the line initialization attempts in the current 15 minute interval.
Includes both successful and failed attempts."
::= { zhoneDslPerfDataEntry 9 }
zhoneDslAlarmProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZhoneDslAlarmProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for Alarm conditions. One entry in this
table reflects a profile defined by a manager which can be used to define
alarm conditions for a modem."
::= { zhoneDsl 6 }
zhoneDslAlarmProfileEntry OBJECT-TYPE
SYNTAX ZhoneDslAlarmProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the zhoneDslAlarmProfile Table."
INDEX { IMPLIED zhoneDslAlarmProfileName }
::= { zhoneDslAlarmProfileTable 1 }
ZhoneDslAlarmProfileEntry ::=
SEQUENCE {
zhoneDslAlarmProfileName
ZhoneAdminString,
zhoneDslThreshold15MinLoss
INTEGER,
zhoneDslThreshold15MinLols
INTEGER,
zhoneDslThreshold15MinLofs
INTEGER,
zhoneDslAlarmProfileRowStatus
ZhoneAdminString
}
zhoneDslAlarmProfileName OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration profile name. Used by the zhoneDslLineConfigProfile entry
to map zhoneDslLine Entry to the appropriate profile.
When `dynamic' profiles are implemented, the profile
name is user specified. Also, the system will always
provide a default profile whose name is `DEFVAL'.
When `static' profiles are implemented, there is an
one-to-one relationship between each line and its
profile. In which case, the profile name will
need to algorithmically represent the Line's ifIndex.
Therefore, the profile's name is a decimal zed string
of the ifIndex that is fixed-length (i.e., 10) with
leading zero(s). For example, the profile name for
ifIndex which equals '15' will be '0000000015'."
::= { zhoneDslAlarmProfileEntry 1 }
zhoneDslThreshold15MinLoss OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of Loss of signal seconds on a DSL interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send a TRAP. 0 will disable the trap."
DEFVAL { 0 }
::= { zhoneDslAlarmProfileEntry 2 }
zhoneDslThreshold15MinLols OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of Loss of link seconds on a DSL interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send a TRAP. 0 will disable the trap."
DEFVAL { 0 }
::= { zhoneDslAlarmProfileEntry 3 }
zhoneDslThreshold15MinLofs OBJECT-TYPE
SYNTAX INTEGER (0..900)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of Loss of framing seconds on a DSL interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send a TRAP. 0 will disable the trap."
DEFVAL { 0 }
::= { zhoneDslAlarmProfileEntry 4 }
zhoneDslAlarmProfileRowStatus OBJECT-TYPE
SYNTAX ZhoneAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus field to control deletion/addition of entries in this
table. Minimal fields to be 'set' for a creation is:"
::= { zhoneDslAlarmProfileEntry 5 }
END
--
-- phyDsl.mib
--
View Git Blame Copy Permalink