3250 lines
117 KiB
Plaintext
3250 lines
117 KiB
Plaintext
--
|
|
-- comAtmAal2.mib
|
|
-- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285
|
|
-- Tuesday, March 02, 2004 at 12:02:15
|
|
--
|
|
|
|
ZhoneAAL2-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
atmVclVpi, atmVclVci
|
|
FROM ATM-MIB
|
|
AtmVpIdentifier, AtmVcIdentifier, AtmVorXAdminStatus, AtmVorXOperStatus, AtmVorXLastChange
|
|
FROM ATM-TC-MIB
|
|
ifIndex
|
|
FROM IF-MIB
|
|
Integer32, Gauge32, Counter32, OBJECT-TYPE, MODULE-IDENTITY,
|
|
OBJECT-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
subVoiceAal2Cid
|
|
FROM ZHONE-GEN-SUBSCRIBER
|
|
zhoneAtm
|
|
FROM Zhone
|
|
ZhoneRowStatus
|
|
FROM Zhone-TC;
|
|
|
|
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
-- Voice Over ATM Adaptation Layer 2 (AAL2)
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1
|
|
zhoneAtmAAl2 MODULE-IDENTITY
|
|
LAST-UPDATED "200403021202Z" -- March 02, 2004 at 12:02 GMT
|
|
ORGANIZATION
|
|
"Zhone Technologies, Inc."
|
|
CONTACT-INFO
|
|
" Postal:
|
|
Zhone Technologies, Inc.
|
|
@ Zhone Way
|
|
7001 Oakport Street
|
|
Oakland, CA 94621
|
|
USA
|
|
Toll-Free: +1 877-ZHONE20 (+1 877-946-6320)
|
|
Tel: +1-510-777-7000
|
|
Fax: +1-510-777-7001
|
|
E-mail: support@zhone.com"
|
|
DESCRIPTION
|
|
"ATM Adaptation Layer 2 (AAL2) MIB"
|
|
REVISION "200311191800Z" -- November 19, 2003 at 18:00 GMT
|
|
DESCRIPTION
|
|
"V01.03.12
|
|
Added aal2ElcpIgTable."
|
|
REVISION "200311141419Z" -- November 14, 2003 at 14:19 GMT
|
|
DESCRIPTION
|
|
"V01.03.11
|
|
-- Add new trunk type "
|
|
REVISION "200310031145Z" -- October 03, 2003 at 11:45 GMT
|
|
DESCRIPTION
|
|
"V01.03.10
|
|
Added enum option 'enabledDynamic'
|
|
to audio service selection for AAL2 VCL,
|
|
CID and ELCP Port tables."
|
|
REVISION "200309021130Z" -- September 02, 2003 at 11:30 GMT
|
|
DESCRIPTION
|
|
"V01.03.09
|
|
Added enum option 'enabledEchoCancelOff'
|
|
to audio service selection for AAL2 VCL,
|
|
CID and ELCP Port tables."
|
|
REVISION "200301211650Z" -- January 21, 2003 at 16:50 GMT
|
|
DESCRIPTION
|
|
"V01.03.08
|
|
Added aal2ElcpPortTable."
|
|
REVISION "200210011059Z" -- October 01, 2002 at 10:59 GMT
|
|
DESCRIPTION
|
|
"V01.03.07
|
|
Added traps aal2PerfCellLossThreshTrap and aal2PerfCongestionThreshTrap
|
|
Added new leaf aal2CpsPerfCongestion in aal2CpsPerformanceTable
|
|
Added aal2AlarmConfigTable "
|
|
REVISION "200205291415Z" -- May 29, 2002 at 14:15 GMT
|
|
DESCRIPTION
|
|
"V01.03.06 -
|
|
Added the aal2CidCompletedCalls
|
|
and aal2CidBlockedCallsNoBandwidth
|
|
objects to the aal2CidTable."
|
|
REVISION "200112071723Z" -- December 07, 2001 at 17:23 GMT
|
|
DESCRIPTION
|
|
"V01.03.05 -
|
|
Removed all jetstreamdata references.
|
|
Updated the description for:
|
|
aal2VclMinCidForAal2UserChannels
|
|
aal2VclMaxCidForAal2UserChannels
|
|
aal2VclSscsDefaultType"
|
|
REVISION "200111161025Z" -- November 16, 2001 at 10:25 GMT
|
|
DESCRIPTION
|
|
"V01.03.05 - Updated INDEX clauses for aal2SscsI3662PerfEntry
|
|
and aal2SscsI3662PerfEntry."
|
|
REVISION "200110091028Z" -- October 09, 2001 at 10:28 GMT
|
|
DESCRIPTION
|
|
"V01.03.04 - Added Jestream App Id to atmVccAal2AppId"
|
|
REVISION "200107111358Z" -- July 11, 2001 at 13:58 GMT
|
|
DESCRIPTION
|
|
"V01.03.03 - Add comment for validation rule for aal2VclTable."
|
|
REVISION "200104110955Z" -- April 11, 2001 at 09:55 GMT
|
|
DESCRIPTION
|
|
"V01.03.02 - modify default value for preferred-ap-index.
|
|
"
|
|
REVISION "200101291710Z" -- January 29, 2001 at 17:10 GMT
|
|
DESCRIPTION
|
|
"V01.03.01 - modify default value for preferred-ap-index"
|
|
REVISION "200012201102Z" -- December 20, 2000 at 11:02 GMT
|
|
DESCRIPTION
|
|
"V01.03.00 Added packet length to the
|
|
Audio Profiles. Changed Packet Time and
|
|
Sequence to tenths of milliseconds from
|
|
microseconds.
|
|
"
|
|
REVISION "200011061854Z" -- November 06, 2000 at 18:54 GMT
|
|
DESCRIPTION
|
|
"V01.02.00 - Update traps to point to subscriber MIB for CID
|
|
definition and remove unnecessary trap fields.
|
|
Fix Zhone keywords for statistic table key information."
|
|
REVISION "200010301158Z" -- October 30, 2000 at 11:58 GMT
|
|
DESCRIPTION
|
|
"V01.01.00 - Marked not-supported
|
|
field for FCS. (i.e. ZHONE_KEYWORD_PROFILE_LABEL to
|
|
FOR_FUTURE_RELEASE_ZHONE_KEYWORD_PROFILE_LABEL).
|
|
"
|
|
REVISION "200009111453Z" -- September 11, 2000 at 14:53 GMT
|
|
DESCRIPTION
|
|
"V01.00.00 - Initial Release."
|
|
::= { zhoneAtm 1 }
|
|
|
|
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.0
|
|
aal2Traps OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Traps for the AAL2 MIB."
|
|
::= { zhoneAtmAAl2 0 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.0.1
|
|
aal2ExternalAIS NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex, aal2vpi, aal2Vci }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm Indication Signal - a signal, associated with a
|
|
maintenance alarm detected on a defective maintenance
|
|
span, that is transmitted in the direction of the defect
|
|
as a substitute for the normal signal. Its purpose is to
|
|
show downstream entities that a defect has been identified, so that other maintenance alarms consequent to this first
|
|
defect can be inhibited. The external bit stream
|
|
representation of AIS may be an all 1s signal.
|
|
"
|
|
::= { aal2Traps 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.0.2
|
|
aal2ExternalRAI NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex, aal2vpi, aal2Vci }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Alarm Indication - a signal transmitted upstream
|
|
from a terminal that has detected defects persisting long
|
|
enough to constitute a received signal failure. Its purpose
|
|
is to report in the backward direction that there is an
|
|
interruption of service in the forward direction.
|
|
"
|
|
::= { aal2Traps 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.0.3
|
|
aal2InternalAIS NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex, aal2vpi, aal2Vci, subVoiceAal2Cid }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Alarm Indication Signal - a signal transmitted in the
|
|
downstream direction from the AAL type 2 connecting point
|
|
that first detects a defect affecting the AAL type 2
|
|
connection; this includes defects indicated by lower layers."
|
|
::= { aal2Traps 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.0.4
|
|
aal2InternalRDI NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex, aal2vpi, aal2Vci, subVoiceAal2Cid }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Remote Defect Indication - a signal transmitted upstream by
|
|
an AAL type 2 endpoint that is in an alarm state as the result
|
|
of having received an AAL type 2 connection AIS or having
|
|
detected a defect that affects the AAL type 2 connection."
|
|
::= { aal2Traps 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.0.5
|
|
aal2PvcDown NOTIFICATION-TYPE
|
|
OBJECTS { ifIndex, aal2vpi, aal2Vci }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the the status of the PVC has gone down."
|
|
::= { aal2Traps 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.0.6
|
|
aal2PerfCellLossThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { aal2CpsPerfSTFBadSeq, aal2AlarmConfigThreshCellLoss }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated when the number of Bad Sequence errors
|
|
exceeds the aal2AlarmConfigThreshCellLoss for a 15-minute interval.
|
|
A bad sequence error is detected when some cells have been lost."
|
|
::= { aal2Traps 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.0.7
|
|
aal2PerfCongestionThreshTrap NOTIFICATION-TYPE
|
|
OBJECTS { aal2CpsPerfCongestion, aal2AlarmConfigThreshCongestion }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This trap is generated when the number of congestion events
|
|
exceeds the aal2AlarmConfigThreshCongestion for a 15-minute interval."
|
|
::= { aal2Traps 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.0.8
|
|
aal2ElcpIgOperStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { aal2ElcpIgOperStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification is sent when the operational status of an ELCP interface
|
|
group changes."
|
|
::= { aal2Traps 8 }
|
|
|
|
|
|
-- The ATM Interface AAL2 VCL Table
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1
|
|
aal2VclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Aal2VclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AAL2 Virtual Channel Link (VCL) Table
|
|
|
|
This table contains configuration and state
|
|
information of a bi-directional AAL2 Virtual
|
|
Channel Link (VCL) at an ATM interface. Each
|
|
VCL entry has an associated Connection
|
|
Identifier (CID) table, comprised of one or
|
|
more CID entries. Each VCL entry refers to
|
|
an Audio Profile (AP) by type (pre-defined or
|
|
user-defined) and index into an AP table.
|
|
|
|
An AAL2 VCL entry is created by the agent
|
|
when an RFC2515 (ATM-MIB) atmVclEntry of
|
|
atmVccAalType 2 is created. Objects in the
|
|
row entry can by modified by CLI or ZMS if
|
|
the connection is down. Deletion of AAL2 VCL
|
|
entries is controlled by the rfc2515 (ATM-MIB)
|
|
atmVclRowStatus."
|
|
REFERENCE
|
|
"
|
|
A. Perez, 'AAL Type 2 Functional Specification'
|
|
|
|
A. Perez, aal2Provision.h, aal2rpAudioProfileAPI.h
|
|
|
|
A. Perez, 'AAL2 Entity Relational Diagram'
|
|
|
|
ITU-T, 'I.366.1, Segmentation and Reassembly
|
|
Service Specific Convergence Sublayer for the
|
|
AAL type 2'
|
|
|
|
ITU-T, 'I.366.2, AAL type 2 service specific
|
|
convergence sublayer for trunking'
|
|
|
|
ITU-T, 'I.363.2, B-ISDN ATM Adaptation layer
|
|
specification:Type 2 AAL'
|
|
|
|
ATM Forum, 'Voice and Multimedia Over ATM - Loop
|
|
Emulation Service Using AAL2'
|
|
|
|
ATM Forum, 'Protocol Independent MIB for ATM
|
|
Trunking using AAL2 for Narrowband Services
|
|
(Addendum to af-vtoa-0113.000)'
|
|
|
|
ATM Forum, 'ATM Forum Well-known Addresses and
|
|
Assigned Codes', 5/25/2000.
|
|
"
|
|
::= { zhoneAtmAAl2 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1
|
|
aal2VclEntry OBJECT-TYPE
|
|
SYNTAX Aal2VclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the AAL2 Virtual Channel Link (VCL)
|
|
Table. Indexed by ifIndex, atmVclVpi from
|
|
atmVclTable, and atmVclVci from atmVclTable.
|
|
|
|
An AAL2 VCL entry or row (aal2VclEntry) is
|
|
'automatically' created by the agent when an
|
|
rfc2515 (ATM-MIB) atmVclEntry with atmVccAalType
|
|
2 is created. The request to create an RFC2515
|
|
atmVclEntry can originate at either CLI or ZMS.
|
|
Once the row exists, objects within the row with
|
|
read-write access can by modified by CLI or ZMS
|
|
if the connection is down. Deletion of an
|
|
aal2VclEntry is managed by the rfc2515 (ATM-MIB)
|
|
atmVclRowStatus.
|
|
|
|
Note there is no RowStatus in the aal2VclEntry,
|
|
whereas there is an atmVclRowStatus in the
|
|
rfc2515 atmVclEntry."
|
|
INDEX { ifIndex, atmVclVpi, atmVclVci }
|
|
::= { aal2VclTable 1 }
|
|
|
|
|
|
Aal2VclEntry ::=
|
|
SEQUENCE {
|
|
atmVccAal2AppId
|
|
INTEGER,
|
|
atmVccAal2VccI
|
|
Integer32,
|
|
atmVccAal2SigVccI
|
|
Integer32,
|
|
aal2VclAudioProfileIdentifier
|
|
Integer32,
|
|
aal2VclSscsDefaultType
|
|
INTEGER,
|
|
aal2VclMaxCpsSduSize
|
|
Integer32,
|
|
aal2VclMaxNumberMultiplexChannels
|
|
Integer32,
|
|
aal2VclMinCidForAal2UserChannels
|
|
Integer32,
|
|
aal2VclMaxCidForAal2UserChannels
|
|
Integer32,
|
|
aal2VclNextCid
|
|
Integer32,
|
|
aal2VclTimerCU
|
|
Integer32,
|
|
aal2VclAudioService
|
|
INTEGER,
|
|
aal2VclCircuitModeData
|
|
INTEGER,
|
|
aal2VclFrameModeData
|
|
INTEGER,
|
|
aal2VclFaxDemoRemo
|
|
INTEGER,
|
|
aal2VclCAS
|
|
INTEGER,
|
|
aal2VclTrunkType
|
|
INTEGER,
|
|
aal2VclDTMFDialedDigits
|
|
INTEGER,
|
|
aal2VclMfR1DialedDigits
|
|
INTEGER,
|
|
aal2VclMfR2DialedDigits
|
|
INTEGER,
|
|
aal2VclPCMEncoding
|
|
INTEGER,
|
|
aal2VclMaxLengthFrame
|
|
Integer32,
|
|
aal2VclMaxSDULength
|
|
Integer32,
|
|
aal2VclRasTimer
|
|
Integer32,
|
|
aal2VclCellsReceived
|
|
Gauge32,
|
|
aal2VclCellsSent
|
|
Gauge32,
|
|
aal2VclStatsTimeElapsed
|
|
Integer32
|
|
}
|
|
|
|
-- For atmVccAalType == aal2.
|
|
--
|
|
-- For all objects the max/min/default are defined in
|
|
-- STR-VMOA-LES-01-00 Appendix E
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.1
|
|
atmVccAal2AppId OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
casPotsOnlyNoElcp(10),
|
|
pstnPotsOnlyNoElcp(11),
|
|
pstnPotsOnlyElcp(12),
|
|
dss1BriOnlyNoElcp(13),
|
|
dss1BriOnlyElcp(14),
|
|
casPotsDss1BriNoElcp(15),
|
|
pstnPotsDss1BriNoElcp(16),
|
|
pstnPotsDss1BriElcp(17),
|
|
otherCcs(18),
|
|
jetstream(255)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STR-VMOA-LES-01-00 4.1.1 Application Identifier (AppId)
|
|
|
|
The Application Identifier (AppId) specifies protocol
|
|
combinations used between IWFs.
|
|
|
|
The following AppId values can be found at the
|
|
ATM Forum public web site in section 5 of 'ATM
|
|
Forum Well-known Addresses and Assigned Codes'.
|
|
|
|
0000000A Loop Emulation Service using CAS (POTS only)
|
|
without ELCP
|
|
0000000B Loop Emulation Service using PSTN signalling (POTS only)
|
|
without ELCP. Note: This application is not currently
|
|
supported.
|
|
0000000C Loop Emulation Service using PSTN signalling (POTS only)
|
|
with ELCP. Note: This application is not currently supported.
|
|
0000000D Loop Emulation Service using DSS1 in support of BRI
|
|
(BRI only) without ELCP
|
|
0000000E Loop Emulation Service using DSS1 in support of BRI
|
|
(BRI only) with ELCP. Note: This application is not currently
|
|
supported.
|
|
0000000F Loop Emulation Service using CAS in support of POTS,
|
|
and DSS1 in support of BRI (without ELCP). Note: This
|
|
application is not currently supported.
|
|
00000010 Loop Emulation Service using PSTN signalling in support
|
|
of POTS, and DSS1 in support of BRI (without ELCP).Note:
|
|
This application is not currently supported
|
|
00000011 Loop Emulation Service using PSTN signalling in support
|
|
of POTS,and DSS1 in support of BRI (with ELCP). Note: This
|
|
application is not currently supported.
|
|
00000012 Loop Emulation Service using other variety of CCS. Note:
|
|
This application is not currently supported.
|
|
00000013 Unspecified mode of Loop Emulation Service. Note: This
|
|
application is not currently supported.
|
|
000000FF This is a Zhone proprietary application id and indicates
|
|
that the protocol is Jetstream Aal2.
|
|
By default this value is set to casPotsOnlyNoElcp."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Section 4.1.1, ATM Forum Well-known
|
|
Addresses and Assigned Codes, Section 5"
|
|
::= { aal2VclEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.2
|
|
atmVccAal2VccI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STR-VMOA-LES-01-00 4.1.2 VCC Identifier (VCCI)
|
|
|
|
To distinguish multiple VCCs, each shall be
|
|
assigned a VCCI. The creator of an SVC shall
|
|
assign its VCCI. The VCCI of a PVC is
|
|
mutually provisioned.
|
|
|
|
The VCCI shall be unique for all VCCs between a
|
|
CP-IWF and a CO-IWF, but may be repeated with
|
|
other CP-IWF/CO-IWF pairings. Between a CP-IWF
|
|
and CO-IWF, a VCCI + CID pair is enough to
|
|
identify an AAL2 channel."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Section 4.1.2"
|
|
::= { aal2VclEntry 2 }
|
|
|
|
|
|
-- Switched Vccs are not currently supported.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.3
|
|
atmVccAal2SigVccI OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STR-VMOA-LES-01-00 4.1.3 Signaling VCC Identifier (SigVCCI)
|
|
|
|
If an AAL2 VCC is controlled by CCS, then
|
|
SigVCCI = VCCI is indicated. Conversely if
|
|
SigVCCI = VCCI then the AAL2 VCC contains CCS,
|
|
which controls the AAL2 channels within that VCC."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Section 4.1.3"
|
|
::= { aal2VclEntry 3 }
|
|
|
|
|
|
-- Audio Profile sources can be either pre-defined or
|
|
-- user-defined. The AAL2 Audio Profile Table,
|
|
-- aal2AudioProfileTable, accomodates both pre-defined
|
|
-- and user-defined profile types. The range of values
|
|
-- for the Audio Profile Identifier determines whether
|
|
-- a profile entry (row) is pre-defined or user-defined.
|
|
--
|
|
-- Audio Profile objects (columns in the entry or row)
|
|
-- are defined to have READ-CREATE max-access.
|
|
-- However, the agent and ZMS implement pre-defined
|
|
-- audio profile entry rows as having READ-ONLY
|
|
-- columns whereas user-defined audio profile columns
|
|
-- are implemented as READ-CREATE objects.
|
|
--
|
|
-- All pre-defined profiles entries have well-known
|
|
-- Identifier values in the 1..255 range and are
|
|
-- implicitly READ-ONLY in access. Both the agent
|
|
-- and ZMS should ensure that pre-defined audio
|
|
-- profiles are treated as READ-ONLY. The agent
|
|
-- will create the pre-defined audio profile entry
|
|
-- rows.
|
|
--
|
|
-- User-defined audio profile entries have Identifier
|
|
-- values in the 256..512 range and have READ-CREATE
|
|
-- access. User-defined audio profile instances can
|
|
-- be created by either CLI or ZMS.
|
|
--
|
|
-- The "user" or creator (ie, agent, ZMS) of user-
|
|
-- defined audio profile entries is responsible for
|
|
-- assigning a valid user-defined identifier value
|
|
-- from the 256..512 range as well as conforming to
|
|
-- the pre-defined audio profile identifier numbering
|
|
-- convention defined by STR-VMOA-LES-01-00 Annex A.
|
|
--
|
|
-- Each identifier can have multiple auto profiles
|
|
-- eg, identifier 7 pcm-64, adpcm-32, silence has
|
|
-- 3 audio profile rows. An audio profile index
|
|
-- (not identifier) identifies each audio profile
|
|
-- row. The AAL2 User Defined Audio Profile Next
|
|
-- Index table tells ZMS/agent the next index to
|
|
-- use for a given identifier.
|
|
--
|
|
-- See the descriptions for the AAL2 Audio Profile
|
|
-- tables.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.4
|
|
aal2VclAudioProfileIdentifier OBJECT-TYPE
|
|
SYNTAX Integer32 (1..512)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Audio Profile for this VCL entry is specified
|
|
by the Audio Profile identifier. The range of
|
|
valid Audio Profile identifiers is well-defined.
|
|
The Audio Profile identifier indexes into the AAL2
|
|
Audio Profile table containing the audio profiles
|
|
corresponding to the specific identifier.
|
|
|
|
For pre-defined audio profiles, the range of valid
|
|
Identifier values is 1..255. From STR-VMOA-LES-01-00
|
|
Annex A, Identifiers defined by the ATM Forum are:
|
|
* 1-6, allocated to af-vtoa-0113.000
|
|
* 7: PCM-64, ADPCM-32 and silence (pcm64Adpcm32Silence)
|
|
* 8: PCM-64 and silence (pcm64Silence)
|
|
* 9: PCM-64 without silence (pcm64)
|
|
* 10: PCM-64, ADPCM-32 without silence (pcm64Adpcm32)
|
|
*11-255: Reserved for future ATM Forum assignment
|
|
|
|
|
|
|
|
If the Audio Profile is user-defined, the range of
|
|
valid identifiers is 256..512.
|
|
|
|
See the descriptions for the AAL2 Audio Profile
|
|
tables."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A "
|
|
::= { aal2VclEntry 4 }
|
|
|
|
|
|
--
|
|
-- Only SSCS type 2 (I.366.2) will be supported
|
|
-- for FCS.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.5
|
|
aal2VclSscsDefaultType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
i3661(1),
|
|
i3662(2),
|
|
jetstreamvoice(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"STR-VMOA-LES-01-00 4.1.4 SSCS Type
|
|
|
|
The SSCS type that applies to each channel of
|
|
an AAL2 VCC will vary according to the usage
|
|
of that channel. Channels that are used to
|
|
carry media streams (POTS or ISDN B-channels)
|
|
shall use the SSCS defined in I.366.2.
|
|
Channels that are used to carry control and
|
|
management plane traffic (CCS, ELCP, ISDN
|
|
D-channels and LES-EOC) shall use the SSCS
|
|
defined in I.366.1.
|
|
|
|
|
|
Channels that are used to carry Jetstream Voice
|
|
shall use SSCS value of jetstreamvoice.
|
|
|
|
Valid values are i3661 (I.366.1), i3662
|
|
(I.366.2), jetstreamvoice."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A, I.366.2 Section 1"
|
|
::= { aal2VclEntry 5 }
|
|
|
|
|
|
-- AAL2 CPS Parameters.
|
|
--
|
|
-- This values are defined in I.363.2 Section 11
|
|
-- and STR-VMOA-LES-01-00 Appendix E
|
|
--
|
|
-- I.363.2 Section 11 Summary of parameters and
|
|
-- values for the AAL type 2
|
|
--
|
|
-- Determination of the values, the system
|
|
-- resources listed in Table 7 must be made
|
|
-- before individual AAL type 2 channels can
|
|
-- be established. Such determination may be
|
|
-- made via provisioning or signalling in a
|
|
-- manner outside the scope of this Recommendation.
|
|
-- In the absence of provisioning or signalling
|
|
-- (ATM level control), the default values
|
|
-- apply. The values of these AAL type 2
|
|
-- system parameters may differ from one ATM
|
|
-- VCC to another.
|
|
--
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.6
|
|
aal2VclMaxCpsSduSize OBJECT-TYPE
|
|
SYNTAX Integer32 (45 | 64)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum length of a CPS-SDU (Max_CPS-SDU_Length).
|
|
Permitted values: 45 or 64 octets. "
|
|
REFERENCE
|
|
"I.363.2 Section 11, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 6 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.7
|
|
aal2VclMaxNumberMultiplexChannels OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
UNITS "channels"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of multiplexed channels.
|
|
Peer-to-peer significance. Valid range
|
|
of values is 1..255. "
|
|
REFERENCE
|
|
"I.363.2 Section 11, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 7 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.8
|
|
aal2VclMinCidForAal2UserChannels OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum CID value for AAL2 user channels.
|
|
Valid range is 1..255.
|
|
|
|
If the field atmVccAal2AppId is set to casPotsOnlyNoElcp
|
|
then the valid range for aal2VclMinCidForAal2UserChannels
|
|
and aal2VclMinCidForAal2UserChannels is between 16 and 128.
|
|
|
|
If the field atmVccAal2AppId is set to dss1BriOnlyNoElcp
|
|
then the valid range for aal2VclMinCidForAal2UserChannels
|
|
and aal2VclMinCidForAal2UserChannels is between 129 and 223.
|
|
|
|
Also the aal2VclMaxCidForAal2UserChannels must be greater
|
|
than aal2VclMinCidForAal2UserChannels.
|
|
|
|
For Jetstream app-id, this Cid value represents the port number
|
|
which the phone is on and the valid range is 1 to 254.
|
|
|
|
The range for non-Jetstream applications is 16 to 255.
|
|
|
|
By default because atmVccAal2AppId is set to casPotsOnlyNoElcp
|
|
the default value of this field is 16."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 8 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.9
|
|
aal2VclMaxCidForAal2UserChannels OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum CID value for AAL2 user channels. Valid
|
|
range is 1..255. Maximum CID is 255.
|
|
|
|
If the field atmVccAal2AppId is set to casPotsOnlyNoElcp
|
|
then the valid range for aal2VclMinCidForAal2UserChannels
|
|
and aal2VclMinCidForAal2UserChannels is between 16 and 128.
|
|
|
|
If the field atmVccAal2AppId is set to dss1BriOnlyNoElcp
|
|
then the valid range for aal2VclMinCidForAal2UserChannels
|
|
and aal2VclMinCidForAal2UserChannels is between 129 and 223.
|
|
|
|
Also the aal2VclMaxCidForAal2UserChannels must be greater
|
|
than aal2VclMinCidForAal2UserChannels.
|
|
|
|
For Jetstream app-id, this Cid value represents the port number
|
|
which the phone is on and the valid range is 1 to 254.
|
|
|
|
The range for non-Jetstream applications is 16 to 255.
|
|
|
|
By default because atmVccAal2AppId is set to casPotsOnlyNoElcp
|
|
the default value of this field is 127."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 9 }
|
|
|
|
|
|
-- The Channel Table Index
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.10
|
|
aal2VclNextCid OBJECT-TYPE
|
|
SYNTAX Integer32 (0 | 1..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Channel Identifier is one of the indicies for
|
|
the CID table, aal2CidTable. The Application Identifier,
|
|
atmVccAal2AppId, determines the valid range of values for
|
|
the aal2Cid. The next CID, aal2VclNextCid, indicates
|
|
the next valid aal2Cid that can be used to create a new
|
|
row in the aal2CidTable. A value of 0 indicates that an
|
|
aal2Cid is not available for a given atmVccAal2AppId.
|
|
The agent manages this value. Range of valid values is
|
|
0, 16..255. Also see the description for aal2Cid."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Section 4.4"
|
|
::= { aal2VclEntry 10 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.11
|
|
aal2VclTimerCU OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value of the 'combined use' Timer_CU.
|
|
The combined use Timer_CU assures that CPS-Packets
|
|
with one or more octets already packed, wait at
|
|
most the duration of Timer_CU before being
|
|
scheduled for transmission (actual transmission
|
|
takes place after receipt of a MAAL_SEND.request
|
|
primitive from Layer Management)."
|
|
REFERENCE
|
|
"I.363.2 Section 11, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 11 }
|
|
|
|
|
|
-- SSCS Default Parameters. Please refer to I.366.2
|
|
-- and STR-VMOA-LES-01-00 Appendix E
|
|
--
|
|
-- STR-VMOA-LES-01-00 4.1.5 Default SSCS Parameter
|
|
-- Values. The SSCS parameters of operation are
|
|
-- used to ensure that interconnected CP- and
|
|
-- CO-IWFs agree on the set of capabilities to
|
|
-- be applied to a VCC. The parameters are defined
|
|
-- in I.366.1 and I.366.2.
|
|
--
|
|
-- From among the SSCS parameter values supported
|
|
-- by both IWFs, one specific set of values may be
|
|
-- designated the default for an AAL2 VCC. Different
|
|
-- AAL2 VCCs between the same two IWFs may have
|
|
-- different default SSCS parameter values. In
|
|
-- the absence of signaling or provisioning on
|
|
-- a per-AAL2 channel basis, either explicit or
|
|
-- implicit, the default SSCS parameter values
|
|
-- shall apply to each AAL2 channel within the
|
|
-- ATM AAL2 VCC.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.12
|
|
aal2VclAudioService OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2),
|
|
enabledEchoCancelOff(3),
|
|
enabledDynamic(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service provided is the transfer of audio
|
|
signals (voice, voiceband data, and facsimile).
|
|
|
|
The data unit traversing the SAP (SSCS SDU)
|
|
contains either a voice encoding or a silence
|
|
encoding. Silences are conveyed across the SAP
|
|
either explicitly by a Silence Insertion
|
|
Descriptor (SID) data unit, or implicitly by
|
|
a Null data unit.
|
|
|
|
Valid values are:
|
|
- enabled.
|
|
- disabled.
|
|
- enabledEchoCancelOff: audio service enabled with echo
|
|
cancellation and silence supression off.
|
|
- enabledDynamic: audio service enabled with ability to
|
|
dynamically disable silence supression, silence detection,
|
|
echo cancellation and compression algorithms on a per-call
|
|
basis."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 12 }
|
|
|
|
|
|
-- Not currently supported.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.13
|
|
aal2VclCircuitModeData OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The service provided is the transfer of circuit
|
|
mode data. The circuit mode data service is an
|
|
emulation of the N*64 kbit/s (N = 1, 2, ..., 30)
|
|
unrestricted, 8 kHz structured circuit mode
|
|
service of Recommendations I.231.1 and
|
|
I.231.10. The value N = 31 is also allowed.
|
|
The value of N does not change during the
|
|
lifetime of a call.
|
|
|
|
Valid values are enabled and disabled. "
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 13 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.14
|
|
aal2VclFrameModeData OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame mode data is an intermittent data stream
|
|
containing delimited units of information,
|
|
possibly of varying size, with idle intervals
|
|
between them.
|
|
|
|
The service provided is the transport of data
|
|
units as specified in the Transmission Error
|
|
Detection service of Recommendation I.366.1.
|
|
There is no assurance of data unit delivery,
|
|
but if delivered, the relative sequence and
|
|
the bit integrity of data units are assured.
|
|
This service corresponds to the service provided
|
|
by the Common Part of AAL type 5, Recommendation
|
|
I.363.5, except that the option of corrupted
|
|
data delivery is not available.
|
|
|
|
Valid values are enabled and disabled. "
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 14 }
|
|
|
|
|
|
-- Not currently supported.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.15
|
|
aal2VclFaxDemoRemo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Facsimile Demodulation/Remodulation is the
|
|
process of detecting facsimile traffic,
|
|
extracting digital information from the
|
|
incoming analogue modulated signal,
|
|
transporting this across a trunk in packet
|
|
formats, and reproducing the facsimile control
|
|
and image information by remodulation at the
|
|
other end.
|
|
|
|
The service provided is the transfer of
|
|
demodulated facsimile image information and
|
|
control information, from the demodulating
|
|
User to the remodulating User.
|
|
|
|
Valid values are enabled and disabled. "
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 15 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.16
|
|
aal2VclCAS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Channel Associated Signalling Bits are bits
|
|
dedicated for connection control across a 1544
|
|
kbit/s or 2048 kbit/s interface that carries
|
|
64 kbit/s channels. Procedures are based on
|
|
the state of up to four signalling bits (A, B,
|
|
C, D) that are allocated per channel per
|
|
multiframe. See I.366.2 3.1.3.2/G.704 and
|
|
5.1.3.2/G.704.
|
|
|
|
The service provided is the transfer of channel
|
|
associated signalling information, i.e. the
|
|
transfer of ABCD bits. Typically, the value of
|
|
the (A,B,C,D) vector does not change for extended
|
|
periods of time.
|
|
|
|
Valid values are enabled and disabled.
|
|
|
|
For jetstream atmVccAal2AppId the only valid value is disabled."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 16 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.17
|
|
aal2VclTrunkType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(1),
|
|
loopstart(2),
|
|
groundstart(3),
|
|
loopreversebattery(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trunk type specifies the signaling method currently
|
|
used. Valid types are loop start,ground start and
|
|
loop reverse battery. The default value is loop start.
|
|
An instance of this object only exists when the
|
|
atmVccAal2AppId is set to casPotsOnlyNoElcp.
|
|
If the atmVccAal2AppId is not equal to casPotsOnlyNoElcp
|
|
the entry should be set unknown."
|
|
::= { aal2VclEntry 17 }
|
|
|
|
|
|
-- Dialed Digits are multifrequency audio tones
|
|
-- typically used for inter-register signalling of
|
|
-- addresses during call set-up or for end-to-end
|
|
-- device control during an established call.
|
|
-- Depending on the system, codes are defined for
|
|
-- the digits 0-9 of a telephone keypad and other
|
|
-- auxiliary signals.
|
|
--
|
|
-- The service provided is the transfer of dialed
|
|
-- digits, namely, the transfer of five descriptors:
|
|
-- digit type, digit character, start time, end time,
|
|
-- and power level of the dual frequency pulse.
|
|
--
|
|
-- Not currently supported.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.18
|
|
aal2VclDTMFDialedDigits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DTMF Dialed Digits
|
|
|
|
Dialed Digits are multifrequency audio tones
|
|
typically used for inter-register signalling of
|
|
addresses during call set-up or for end-to-end
|
|
device control during an established call.
|
|
Depending on the system, codes are defined for
|
|
the digits 0-9 of a telephone keypad and other
|
|
auxiliary signals.
|
|
|
|
The service provided is the transfer of dialed
|
|
digits, namely, the transfer of five descriptors:
|
|
digit type, digit character, start time, end time,
|
|
and power level of the dual frequency pulse.
|
|
|
|
Valid values are enabled and disabled. "
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 18 }
|
|
|
|
|
|
-- Not currently supported.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.19
|
|
aal2VclMfR1DialedDigits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MF-R1 Dialed Digits.
|
|
|
|
See description for atmVccAal2DTMFDialedDigits.
|
|
|
|
Valid values are enabled and disabled. "
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 19 }
|
|
|
|
|
|
-- Not currently supported.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.20
|
|
aal2VclMfR2DialedDigits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MF-R2 Dialed Digits.
|
|
|
|
See description for atmVccAal2DTMFDialedDigits.
|
|
|
|
Valid values are enabled and disabled. "
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 20 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.21
|
|
aal2VclPCMEncoding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
muLaw(1),
|
|
aLaw(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Encoding Data Unit is an octet-aligned
|
|
concatenation of one or more frames of an
|
|
audio algorithm, entailing a specific format
|
|
of the bits. Every audio packet and SDU
|
|
contains an integral number of EDUs.
|
|
Predefined profiles reference the EDUs that
|
|
are defined in I.366.2 Annexes B through I.
|
|
|
|
Valid values are muLaw and aLaw. "
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E, Table A-2"
|
|
::= { aal2VclEntry 21 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.22
|
|
aal2VclMaxLengthFrame OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum length for frame mode data.
|
|
|
|
Valid values are 1..65535. "
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
::= { aal2VclEntry 22 }
|
|
|
|
|
|
-- SSCS Default Parameters. Please refer to I.366.1
|
|
-- See 7.7.1 for description.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.23
|
|
aal2VclMaxSDULength OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65568)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max_SDU_Length indicates the maximum size
|
|
SSSAR-SDU, in octets, that is allowed to be
|
|
reassembled. Significance to peer-to-peer.
|
|
|
|
The maximum size of an SSSAR-SDU may be
|
|
restricted on a per SSSAR-connection basis with
|
|
the parameter 'Max_SDU_Length'. This parameter
|
|
is negotiated by signalling or management
|
|
procedures.
|
|
|
|
Valid values are 1..65568. "
|
|
REFERENCE
|
|
"I.366.1 Section 7.7.1, Table 6/I.366.1 (Parameters
|
|
for Segmentation and Reassembly)"
|
|
::= { aal2VclEntry 23 }
|
|
|
|
|
|
-- It has been suggested that since there is no restriction
|
|
-- on the delay from the DSP implementation perspective (as
|
|
-- the DSP sends the packet on the fly to the host), that
|
|
-- the RAS timer should be provisioned after a data channel
|
|
-- is open in a similar fashion to the maximum SDU length.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.24
|
|
aal2VclRasTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reassembly timer RAS_Timer assures that the
|
|
reassembly of an SSSAR-SDU does not exceed a
|
|
certain time; if such timer supervision is not
|
|
required, the timer is disabled by setting the
|
|
timer value to 0.
|
|
|
|
If the timer is exceeded the i366.1 receive state
|
|
machine goes into the abort state, look for the
|
|
end of the frame and goes back to idle. See figure
|
|
8.1 I.366.2 State transition diagram.
|
|
|
|
The default is 0 milliseconds. Value of 0 means the
|
|
timer is disabled."
|
|
REFERENCE
|
|
"I.366.1 7.7.1, I.366.2 State transition diagram figure 8.1"
|
|
::= { aal2VclEntry 24 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.25
|
|
aal2VclCellsReceived OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "cells"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total cells received"
|
|
::= { aal2VclEntry 25 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.26
|
|
aal2VclCellsSent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "cells"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total cells sent"
|
|
::= { aal2VclEntry 26 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.1.1.27
|
|
aal2VclStatsTimeElapsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that have elapsed since
|
|
the beginning of the current collection
|
|
period. If, for some reason, such as an
|
|
adjustment in the system's time-of-day clock,
|
|
the current interval exceeds the maximum value,
|
|
the agent will return the maximum value."
|
|
::= { aal2VclEntry 27 }
|
|
|
|
|
|
-- The AAL2 Channel Identifier Table
|
|
--
|
|
-- atmVccAal2AppId values for applications running
|
|
-- over Common Channel Signaling can cause the
|
|
-- auto-creation of an AAL2 CID entry. However,
|
|
-- for FCS, there is no auto-creation of AAL2
|
|
-- CID entries.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2
|
|
aal2CidTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Aal2CidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AAL2 Channel Identifier (CID) Table
|
|
|
|
The AAL2 Channel Identifier Table contains
|
|
status, I.366.2 SSCS parameters, and I.366.1
|
|
SSCS parameters for the channel identifier.
|
|
Default values for these objects are defined
|
|
in the AAL2 VCL entry. Values in the AAL2
|
|
Channel Identifier entry can supercede the
|
|
defaults specified in the AAL2 VCL entry.
|
|
|
|
The maximum number of connections or CIDs
|
|
allowed per ATM VCL is 255.
|
|
|
|
Certain atmVccAal2AppID values (ie, any app
|
|
running over Common Channel Signaling) can
|
|
cause the auto-creation of an AAL2 CID entry.
|
|
When the creation of an AAL2 VCL entry does
|
|
not lead to the auto-creation of an AAL2 CID
|
|
entry by the agent, a CLI or ZMS request from
|
|
the CLI or ZMS can use the AAL2 CID entry
|
|
RowStatus object, aal2CidRowStatus, to create
|
|
an aal2CidEntry instance. In this case, an
|
|
rfc2515 (ATM-MIB) atmVclEntry must exist prior
|
|
to creating an AAL2 CID entry.
|
|
|
|
AAL2 CID entry deletion is accomplished with
|
|
the AAL2 CID entry RowStatus object,
|
|
aal2CidRowStatus. If an AAL2 VCL entry
|
|
is deleted, then the agent cleans up all
|
|
associated AAL2 CID entries."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Section 4.4"
|
|
::= { zhoneAtmAAl2 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1
|
|
aal2CidEntry OBJECT-TYPE
|
|
SYNTAX Aal2CidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the Channel Identifier (CID) table.
|
|
Indexed by ifIndex, atmVclVpi from atmVclTable,
|
|
atmVclVci from atmVclTable, and aal2Cid."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Section 4.4"
|
|
INDEX { ifIndex, atmVclVpi, atmVclVci, aal2Cid }
|
|
::= { aal2CidTable 1 }
|
|
|
|
|
|
Aal2CidEntry ::=
|
|
SEQUENCE {
|
|
aal2Cid
|
|
Integer32,
|
|
aal2CidAdminStatus
|
|
AtmVorXAdminStatus,
|
|
aal2CidOperStatus
|
|
AtmVorXOperStatus,
|
|
aal2CidLastChange
|
|
AtmVorXLastChange,
|
|
aal2CidSscsType
|
|
INTEGER,
|
|
aal2CidAudioService
|
|
INTEGER,
|
|
aal2CidCircuitModeData
|
|
INTEGER,
|
|
aal2CidFrameModeData
|
|
INTEGER,
|
|
aal2CidFaxDemoRemo
|
|
INTEGER,
|
|
aal2CidCAS
|
|
INTEGER,
|
|
aal2CidDTMFDialedDigits
|
|
INTEGER,
|
|
aal2CidMfR1DialedDigits
|
|
INTEGER,
|
|
aal2CidMfR2DialedDigits
|
|
INTEGER,
|
|
aal2CidPCMEncoding
|
|
INTEGER,
|
|
aal2CidMaxLengthFrame
|
|
Integer32,
|
|
aal2CidMaxSDULength
|
|
Integer32,
|
|
aal2CidRasTimer
|
|
Integer32,
|
|
aal2CidPreferredApIndex
|
|
Integer32,
|
|
aal2CidCellsReceived
|
|
Gauge32,
|
|
aal2CidCellsSent
|
|
Gauge32,
|
|
aal2CidStatsTimeElapsed
|
|
Integer32,
|
|
aal2CidRowStatus
|
|
ZhoneRowStatus,
|
|
aal2CidCompletedCalls
|
|
Counter32,
|
|
aal2CidBlockedCallsNoBandwidth
|
|
Counter32
|
|
}
|
|
|
|
-- The Channel Table Index
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.1
|
|
aal2Cid OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Channel Identifier is one of the indices for
|
|
the CID table.
|
|
|
|
The maximum number of connections allowed per ATM
|
|
VCL is 255. Note that there are restrictions in
|
|
the use of CID and in order to be LES compliant.
|
|
|
|
The following assignments of AAL2 Channels and CID
|
|
Allocation are specified in STR-VMOA-LES-01-00,
|
|
Section 4.4.
|
|
0 Not used
|
|
1-7 Reserved for I.363.2 layer management
|
|
8 Some CPE manufactures use this CID for CCS
|
|
and/or Emulated Loop Control protocol
|
|
9 If LES-EOC is supported, else not used.
|
|
10-15 for future revisions of STR-VMOA-LES-01-00
|
|
16-223 Bearer channels and ISDN D-channels
|
|
224-255 set aside for vendor-specific usage
|
|
|
|
See STR-VMOA-LES-01-00 4.4 for allocation of CIDs
|
|
when ELCP is not used, allocation of CIDs when ELCP
|
|
is used, and implementation options for AAL2 CPS.
|
|
If the ELCP is not used, the default assignment of
|
|
CIDs to bearer channels and ISDN D-channels shall
|
|
be as specified in this section. These default
|
|
assignments may be overridden by provisioning or
|
|
by management action.
|
|
|
|
POTS ports at the CP-IWF shall be numbered from 1
|
|
to N, where N is the number of POTS ports that
|
|
exist at the CP-IWF. CID = 16 shall be assigned
|
|
to POTS port number 1, CID = 17 shall be assigned
|
|
to POTS port number 2, and so on up to POTS port
|
|
number N.
|
|
|
|
For Jetstream applications, CID refers to port
|
|
number and the valid range is 1 to 255.
|
|
|
|
For non-Jetstream applications, the valid range
|
|
is 16 to 255."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Section 4.4"
|
|
::= { aal2CidEntry 1 }
|
|
|
|
|
|
-- The AAL2 Channel Table Status Group
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.2
|
|
aal2CidAdminStatus OBJECT-TYPE
|
|
SYNTAX AtmVorXAdminStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is instantiated only for a VCL
|
|
which terminates a VCC (i.e., one which is NOT
|
|
cross-connected to other VCLs). Its value
|
|
specifies the desired administrative state of
|
|
the CID.
|
|
|
|
Valid values are up and down. The default is
|
|
down."
|
|
DEFVAL { down }
|
|
::= { aal2CidEntry 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.3
|
|
aal2CidOperStatus OBJECT-TYPE
|
|
SYNTAX AtmVorXOperStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational status of the CID.
|
|
|
|
Valid values are up, down, and unknown."
|
|
::= { aal2CidEntry 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.4
|
|
aal2CidLastChange OBJECT-TYPE
|
|
SYNTAX AtmVorXLastChange
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time this CID
|
|
entered its current operational state,
|
|
indicated by aal2CidOperStatus."
|
|
::= { aal2CidEntry 4 }
|
|
|
|
|
|
-- The default for FCS is I.366.2.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.5
|
|
aal2CidSscsType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
i3661(1),
|
|
i3662(2),
|
|
jetstreamvoice(3)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SSCS type that applies to each channel of
|
|
an AAL2 VCC will vary according to the usage
|
|
of that channel. Channels that are used to
|
|
carry media streams (POTS or ISDN B-channels)
|
|
shall use the SSCS defined in I.366.2.
|
|
Channels that are used to carry control and
|
|
management plane traffic (CCS, ELCP, ISDN
|
|
D-channels and LES-EOC) shall use the SSCS
|
|
defined in I.366.1.
|
|
|
|
Channels that are used to carry Jetstream Voice
|
|
shall use SSCS value of jetstreamvoice.
|
|
|
|
Valid values are i3661 (I.366.1) and i3662
|
|
(I.366.2), jetstreamvoice.
|
|
|
|
If this value is not set by CLI or ZMS, the
|
|
agent will use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Section 4.1.4"
|
|
DEFVAL { i3662 }
|
|
::= { aal2CidEntry 5 }
|
|
|
|
|
|
-- SSCS Default Parameters. Please refer to I.366.2
|
|
-- and STR-VMOA-LES-01-00 Appendix E
|
|
--
|
|
-- I.366.2 SSCS parameters.This parameter can be
|
|
-- taken from the Default VCL values in the absence
|
|
-- of signaling or provisioning on a per channel
|
|
-- basis, either explicit or implicit, the default
|
|
-- SSCS parameters values shall apply to each AAL2
|
|
-- channel within the ATM AAL2 VCC.
|
|
--
|
|
-- Refer to section 4.1.5 in STR-VMOA-LES-01-00.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.6
|
|
aal2CidAudioService OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2),
|
|
enabledEchoCancelOff(3),
|
|
enabledDynamic(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Audio Service.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are:
|
|
- enabled.
|
|
- disabled.
|
|
- enabledEchoCancelOff: audio service enabled with echo
|
|
cancellation and silence supression off.
|
|
- enabledDynamic: audio service enabled with ability to
|
|
dynamically disable silence supression, silence detection,
|
|
echo cancellation and compression algorithms on a per-call
|
|
basis.
|
|
|
|
If this value is not set by CLI or ZMS, the agent will
|
|
use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { enabled }
|
|
::= { aal2CidEntry 6 }
|
|
|
|
|
|
-- Not currently supported.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.7
|
|
aal2CidCircuitModeData OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Circuit Mode Data.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are enabled and disabled. If
|
|
this value is not set by CLI or ZMS, the
|
|
agent will use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { disabled }
|
|
::= { aal2CidEntry 7 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.8
|
|
aal2CidFrameModeData OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Frame Mode Data.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are enabled and disabled. If
|
|
this value is not set by CLI or ZMS, the
|
|
agent will use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { disabled }
|
|
::= { aal2CidEntry 8 }
|
|
|
|
|
|
-- Not currently supported
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.9
|
|
aal2CidFaxDemoRemo OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fax Demodulation/Remodulation.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are enabled and disabled. If
|
|
this value is not set by CLI or ZMS, the
|
|
agent will use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { disabled }
|
|
::= { aal2CidEntry 9 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.10
|
|
aal2CidCAS OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CAS (Channel Associated Signaling).
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are enabled and disabled. If
|
|
this value is not set by CLI or ZMS, the
|
|
agent will use the AAL2 VCL entry default.
|
|
|
|
For jetstream atmVccAal2AppId the only valid value is disabled."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { enabled }
|
|
::= { aal2CidEntry 10 }
|
|
|
|
|
|
-- Not currently supported.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.11
|
|
aal2CidDTMFDialedDigits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DTMF Dialed Digits.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are enabled and disabled. If
|
|
this value is not set by CLI or ZMS, the
|
|
agent will use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { disabled }
|
|
::= { aal2CidEntry 11 }
|
|
|
|
|
|
-- Not currently supported.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.12
|
|
aal2CidMfR1DialedDigits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MF-R1 Dialed Digits.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are enabled and disabled. If
|
|
this value is not set by CLI or ZMS, the
|
|
agent will use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { disabled }
|
|
::= { aal2CidEntry 12 }
|
|
|
|
|
|
-- Not currently supported.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.13
|
|
aal2CidMfR2DialedDigits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MF-R2 Dialed Digits.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are enabled and disabled. If
|
|
this value is not set by CLI or ZMS, the
|
|
agent will use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { disabled }
|
|
::= { aal2CidEntry 13 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.14
|
|
aal2CidPCMEncoding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
muLaw(1),
|
|
aLaw(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PCM Encoding.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are muLaw and aLaw. If this
|
|
value is not set by CLI or ZMS, the agent
|
|
will use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { muLaw }
|
|
::= { aal2CidEntry 14 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.15
|
|
aal2CidMaxLengthFrame OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max length frame mode data.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are 1..65535. If this value is
|
|
not set by CLI or ZMS, the agent will use
|
|
the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { 65535 }
|
|
::= { aal2CidEntry 15 }
|
|
|
|
|
|
-- SSCS Default Parameters. Please refer to I.366.1
|
|
-- See 7.7.1 for description.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.16
|
|
aal2CidMaxSDULength OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65568)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max_SDU_Length
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are 1..65568. If this value is
|
|
not set by CLI or ZMS, the agent will use
|
|
the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.1 Section 7.7.1"
|
|
DEFVAL { 1536 }
|
|
::= { aal2CidEntry 16 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.17
|
|
aal2CidRasTimer OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reassembly timer (RAS_Timer).
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
If this value is not set by CLI or ZMS, the
|
|
agent will use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.1 7.7.1"
|
|
DEFVAL { 0 }
|
|
::= { aal2CidEntry 17 }
|
|
|
|
|
|
-- This field points to the default Encoding index for an
|
|
-- Audio Profile Identifier.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.18
|
|
aal2CidPreferredApIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..512)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index for the preferred audio encoding format within
|
|
the Audio Profile. The Index must be an agreed
|
|
operating parameter between the transmitter and
|
|
receiver for both directions. An aal2CidPreferredApIndex
|
|
identifies an audio profile row of the selected audio
|
|
profile at the aal2 Vcl."
|
|
DEFVAL { 1 }
|
|
::= { aal2CidEntry 18 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.19
|
|
aal2CidCellsReceived OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total cells received"
|
|
::= { aal2CidEntry 19 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.20
|
|
aal2CidCellsSent OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total cells sent"
|
|
::= { aal2CidEntry 20 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.21
|
|
aal2CidStatsTimeElapsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds that have elapsed since
|
|
the beginning of the current collection
|
|
period. If, for some reason, such as an
|
|
adjustment in the system's time-of-day clock,
|
|
the current interval exceeds the maximum value,
|
|
the agent will return the maximum value."
|
|
::= { aal2CidEntry 21 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.22
|
|
aal2CidRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to control row creation and deletion.
|
|
|
|
A row in this table is created using a
|
|
single SNMP SET request with varbinds for:
|
|
a) aal2CidRowStatus set to'CreateAndGo'
|
|
b) the following READ-CREATE objects with a
|
|
DEFVAL but whose defined default value is
|
|
inappropriate:
|
|
* aal2CidAdminStatus
|
|
|
|
If 'createAndGo' successfully created a new
|
|
row, the RowStatus will be 'active'.
|
|
Subsequent to successful row creation,
|
|
the RowStatus can be retrieved via an
|
|
SNMP GET and the returned RowStatus value
|
|
is active. If the 'createAndGo' was
|
|
unsuccessful an SNMP error will be
|
|
returned and a subsequent GET on the
|
|
non-existent row will also return an
|
|
SNMP error of noSuchInstance. An SNMP SET
|
|
with the RowStatus value of 'destroy'
|
|
indicates that the agent should remove
|
|
the row from service and then delete it."
|
|
::= { aal2CidEntry 22 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.23
|
|
aal2CidCompletedCalls OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of completed calls made on the CID."
|
|
::= { aal2CidEntry 23 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.2.1.24
|
|
aal2CidBlockedCallsNoBandwidth OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of calls blocked on the CID because there
|
|
was not enough bandwidth to support the call."
|
|
::= { aal2CidEntry 24 }
|
|
|
|
|
|
-- The AAL2 User-defined Audio Profile Next Index Table
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.3
|
|
aal2UserDefinedAudioProfileNextIndexTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Aal2UserDefinedAudioProfileNextIndexEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AAL2 User-defined Audio Profile Next Index Table
|
|
consists of a single READ-ONLY object maintained by
|
|
the agent. For a given aal2VclAudioProfileIdentifier,
|
|
the entry indicates the next available index
|
|
to be used for aal2ApIndex when creating user-defined
|
|
entries in the AAL2 Audio Profile Table.
|
|
|
|
User-defined audio profile entries have audio profile
|
|
identifiers in the 256..512 range."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A"
|
|
::= { zhoneAtmAAl2 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.3.1
|
|
aal2UserDefinedAudioProfileNextIndexEntry OBJECT-TYPE
|
|
SYNTAX Aal2UserDefinedAudioProfileNextIndexEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the AAL2 Audio Profile Next Index Table.
|
|
Indexed by aal2VclAudioProfileIdentifier from
|
|
aal2VclTable. Each Identifier is associated with
|
|
an object whose value is used for aal2UdApIndex when
|
|
creating entries in the AAL2 User-defined Audio Profile
|
|
Table."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A"
|
|
INDEX { aal2VclAudioProfileIdentifier }
|
|
::= { aal2UserDefinedAudioProfileNextIndexTable 1 }
|
|
|
|
|
|
Aal2UserDefinedAudioProfileNextIndexEntry ::=
|
|
SEQUENCE {
|
|
aal2UdApNextIndex
|
|
Integer32
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.3.1.1
|
|
aal2UdApNextIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the next available index, for the
|
|
aal2VclAudioProfileIdentifier index, to be used for
|
|
aal2ApIndex when creating user-defined Audio Profile
|
|
entries in the AAL2 Audio Profile Table.
|
|
|
|
The value 0 indicates that no unassigned entries are
|
|
available. To obtain the aal2ApIndex value for a
|
|
new entry, the manager issues a management protocol
|
|
retrieval operation to obtain the current value of
|
|
this object. After each retrieval, the agent should
|
|
modify the value to the next unassigned index. After
|
|
a manager retrieves a value the agent will determine
|
|
through its local policy when this index value will
|
|
be made available for reuse.
|
|
|
|
Valid values are 0..255"
|
|
::= { aal2UserDefinedAudioProfileNextIndexEntry 1 }
|
|
|
|
|
|
-- The AAL2 Audio Profile Table consists of pre-defined
|
|
-- and user-defined audio profile entries. Pre-defined
|
|
-- audio profiles are instantiated by the agent and are
|
|
-- defined by STR-VMOA-LES-01-00 Annex A. User-defined
|
|
-- profiles entries are created via the CLI or ZMS.
|
|
-- Refer to the description for the VCL Audio Profile
|
|
-- Identifier, aal2VclAudioProfileIdentifier, in the
|
|
-- AAL2 VCL Table.
|
|
--
|
|
-- Each Audio Profile entry is indexed by an Audio
|
|
-- Profile Identifier, whose value is well-defined by
|
|
-- STR-VMOA-LES-01-00 Annex A. Pre-defined audio
|
|
-- profile identifiers are in the range 1..255.
|
|
-- User-defined audio profile identifiers are in the
|
|
-- range 256..512.
|
|
--
|
|
-- The agent and ZMS are responsible for managing
|
|
-- identifier values.
|
|
--
|
|
-- Each identifier is associated with one or more
|
|
-- audio profiles, indexed by the audio profile index,
|
|
-- aal2ApIndex. See the tables in Annex A,
|
|
--
|
|
-- Although MAX-ACCESS for objects within audio profile
|
|
-- entries is READ-CREATE, pre-defined and user-defined
|
|
-- audio profile entry columns are processed differently.
|
|
-- User-defined Audio Profile entries are treated as
|
|
-- READ-CREATE objects created using the RowStatus
|
|
-- object, unlike pre-defined Audio Profile entry
|
|
-- columns which are treated as if READ-ONLY and where
|
|
-- any any row creation requests are ignored.
|
|
--
|
|
-- Audio Profile Tables have 2 indices:
|
|
-- * aal2VclAudioProfileIdentifier from aal2VclEntry
|
|
-- * aal2ApIndex from aal2AudioProfileEntry
|
|
--
|
|
-- For each Audio Profile Identifier, there is
|
|
-- one or more audio profile entries (rows). Each
|
|
-- row is indexed by an ApIndex from the
|
|
-- AudioProfileEntry and includes the following
|
|
-- columns:
|
|
-- * UUI codepoint range
|
|
-- * number of SDUs or multiples in a packet
|
|
-- * algorithm
|
|
-- * packet time
|
|
-- * sequence number interval
|
|
-- * silence supression
|
|
-- * packet length
|
|
--
|
|
-- These tables contain the audio profile attributes
|
|
-- needed by the I.366.2 service specific convergence
|
|
-- sublayer.
|
|
--
|
|
-- FCS will only support pre-defined profiles. These Audio Profiles are
|
|
-- listed in STR-VMOA-LES-01.00 Annex A
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4
|
|
aal2AudioProfileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Aal2AudioProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"AAL2 Audio Profile Table
|
|
|
|
A profile is a set of entries, where each
|
|
entry specifies an encoding format (see
|
|
STR-VMOA-LES-01-00 Annex A) with a UUI range
|
|
and length. This set defines a mapping that
|
|
informs the receiver of a type 1 packet how
|
|
to interpret the packet contents, i.e. which
|
|
encoding format in the profile is being used.
|
|
Once a profile is adopted between a transmitter
|
|
and a receiver, the transmitter can select
|
|
any entry of the adopted profile and the
|
|
receiver shall accept any entry selected by
|
|
the transmitter.
|
|
|
|
Unlike the Pre-defined Audio Profile entries,
|
|
which are created by the agent, the User-defined
|
|
Audio Profile entries consists of READ-CREATE
|
|
objects created via CLI or ZMS."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A"
|
|
::= { zhoneAtmAAl2 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1
|
|
aal2AudioProfileEntry OBJECT-TYPE
|
|
SYNTAX Aal2AudioProfileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the AAL2 Audio Profile Table.
|
|
Indexed by aal2VclAudioProfileIdentifier from
|
|
aal2VclEntry and aal2ApIndex. Each Identifier
|
|
can be associated with multiple audio profiles,
|
|
each indexed by aal2ApIndex."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A"
|
|
INDEX { aal2VclAudioProfileIdentifier, aal2ApIndex }
|
|
::= { aal2AudioProfileTable 1 }
|
|
|
|
|
|
Aal2AudioProfileEntry ::=
|
|
SEQUENCE {
|
|
aal2ApIndex
|
|
Integer32,
|
|
aal2ApMinUUI
|
|
Integer32,
|
|
aal2ApMaxUUI
|
|
Integer32,
|
|
aal2ApSduMultiples
|
|
Integer32,
|
|
aal2ApAlgorithm
|
|
INTEGER,
|
|
aal2ApPktTime
|
|
Integer32,
|
|
aal2ApSequence
|
|
Integer32,
|
|
aal2ApRowStatus
|
|
ZhoneRowStatus,
|
|
aal2ApSilenceSupression
|
|
INTEGER,
|
|
aal2ApPacketLength
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1.1
|
|
aal2ApIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..512)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index for the AAL2 Audio Profiles within an Audio
|
|
Profile entry, for a given aal2VclAudioProfileIdentifier.
|
|
|
|
Valid values are 1..512. Pre-defined audio profile
|
|
entries are in the 1..255 range. User-defined audio
|
|
profile entries are in the 256..512 range."
|
|
::= { aal2AudioProfileEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1.2
|
|
aal2ApMinUUI OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum user to user indicator. 0 for encoding
|
|
of audio.
|
|
|
|
Valid values are 0..15. The default is 0 octets."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A"
|
|
DEFVAL { 0 }
|
|
::= { aal2AudioProfileEntry 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1.3
|
|
aal2ApMaxUUI OBJECT-TYPE
|
|
SYNTAX Integer32 (0..15)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum user to user indicator 15 for endcoding
|
|
of audio.
|
|
|
|
Valid values are 0..15. The default is 15 octets."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A, I.366.1 7.7.1"
|
|
DEFVAL { 15 }
|
|
::= { aal2AudioProfileEntry 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1.4
|
|
aal2ApSduMultiples OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the multiples of the SDU for each
|
|
algorithm that occur.
|
|
|
|
Service data units (SDUs) for audio are defined
|
|
in relation to the profile of encoding formats
|
|
adopted on a given AAL type 2 connection. Each
|
|
algorithm that occurs in a given profile may
|
|
appear in multiple entries corresponding to
|
|
packets of different lengths. These packet
|
|
lengths shall align in a simple sequence,
|
|
whereby each is an integral multiple of the
|
|
smallest packet length that occurs for the
|
|
algorithm (at a given bit rate). The smallest
|
|
packet length is the SDU of the algorithm, in
|
|
relation to the given profile.
|
|
|
|
Valid values are 1..8. The default is 1 octets."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A, I.366.1 7.7.1,
|
|
I.366.2 Section 13.2"
|
|
DEFVAL { 1 }
|
|
::= { aal2AudioProfileEntry 4 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1.5
|
|
aal2ApAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
g711(1),
|
|
g722(2),
|
|
g723(3),
|
|
g72632(4),
|
|
g727(5),
|
|
g728(6),
|
|
g729Edu(7),
|
|
g729Sid(8),
|
|
g72964(9),
|
|
g72912(10),
|
|
genericSid(11)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By I.366.2 Annex B through I, the valid values
|
|
are:
|
|
|
|
* G.711 Pulse Code Modulation (PCM). Two
|
|
encoding laws are recommended, referred
|
|
to as A-law and m-law.
|
|
* G.722 Sub-Band Adaptive Pulse Code Modulation
|
|
(SB-ADPCM). Note: This codec is not currently supported.
|
|
* G.723.1 Note: This codec is not currently supported.
|
|
* G.726-32 Adaptive Pulse Code Modulation (ADPCM)
|
|
* G.727 Embedded Adaptive Pulse Code Modulation
|
|
(EADPCM). Note: This codec is not currently supported.
|
|
* G.728 Low Delay Code Excited Linear Prediction
|
|
(LD-CELP). Note: This codec is not currently supported.
|
|
* G.729-8 EDU format.Note: This codec is not currently supported.
|
|
* G.729 SID packet format.Note: This codec is not currently
|
|
supported.
|
|
* G.729-6.4 encoding data unit format. Note: This codec is not
|
|
currently supported.
|
|
* G.729-12 encoding data unit format for the
|
|
forward adaptive mode. Note: This codec is not currently
|
|
supported.
|
|
* Generic SID packet format. Note: This codec is not currently
|
|
supported.
|
|
|
|
The default is g711 (G.711)."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A, I.366.1 7.7.1,
|
|
I.366.2 Annex B through I"
|
|
DEFVAL { g711 }
|
|
::= { aal2AudioProfileEntry 5 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1.6
|
|
aal2ApPktTime OBJECT-TYPE
|
|
SYNTAX Integer32 (50..110)
|
|
UNITS "tenths of milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packet time in tenths of milliseconds.
|
|
|
|
Valid values are 50..110. The default
|
|
is 55 tenths of milliseconds."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A, I.366.1 7.7.1"
|
|
DEFVAL { 55 }
|
|
::= { aal2AudioProfileEntry 6 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1.7
|
|
aal2ApSequence OBJECT-TYPE
|
|
SYNTAX Integer32 (50..110)
|
|
UNITS "tenths of milliseconds"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Audio encoding packets are accompanied by a
|
|
sequence number field that is embedded within
|
|
the UUI codepoint range 0-15 for type 1 packets.
|
|
It is mandatory for a transmitter to increment
|
|
the designated bits at the frequency corresponding
|
|
to the sequence number interval specified in
|
|
the profile entry that defines the last packet
|
|
transmitted.
|
|
|
|
The sequence number interval is the time interval
|
|
for incrementing sequence numbers in the packets
|
|
that convey an audio stream. This interval is
|
|
specified as part of the definition of each entry
|
|
in a profile.
|
|
|
|
Valid values are 50..110. The default is
|
|
55 tenths of milliseconds."
|
|
REFERENCE
|
|
"STR-VMOA-LES-01-00 Annex A, I.366.1 7.7.1"
|
|
DEFVAL { 55 }
|
|
::= { aal2AudioProfileEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1.8
|
|
aal2ApRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to control row creation and deletion.
|
|
|
|
A row in this table is created using a
|
|
single SNMP SET request with varbinds for:
|
|
a) aal2UdApRowStatus set to'CreateAndGo'
|
|
b) the following READ-CREATE objects with a
|
|
DEFVAL but whose defined default value is
|
|
inappropriate:
|
|
* aal2UdApMinUUI
|
|
* aal2UdApMaxUUI
|
|
* aal2UdApSduMultiples
|
|
* aal2UdApAlgorithm
|
|
* aal2UdApPktTime
|
|
* aal2UdApSequence
|
|
|
|
If 'createAndGo' successfully created a new
|
|
row, the RowStatus will be 'active'.
|
|
Subsequent to successful row creation,
|
|
the RowStatus can be retrieved via an
|
|
SNMP GET and the returned RowStatus value
|
|
is active. If the 'createAndGo' was
|
|
unsuccessful an SNMP error will be
|
|
returned and a subsequent GET on the
|
|
non-existent row will also return an
|
|
SNMP error of noSuchInstance. An SNMP SET
|
|
with the RowStatus value of 'destroy'
|
|
indicates that the agent should remove
|
|
the row from service and then delete it."
|
|
::= { aal2AudioProfileEntry 8 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1.9
|
|
aal2ApSilenceSupression OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to control the transmission of cells during periods of
|
|
silence.
|
|
The default value is enabled.
|
|
|
|
|
|
"
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { enabled }
|
|
::= { aal2AudioProfileEntry 9 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.4.1.10
|
|
aal2ApPacketLength OBJECT-TYPE
|
|
SYNTAX Integer32 (1..64)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the length of a packet in octets. The packet length with
|
|
the MinUUI and MaxUUI are used to correctly decode the encoding format.
|
|
|
|
Valid values are 1..64. The default is 44 octets
|
|
"
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { 44 }
|
|
::= { aal2AudioProfileEntry 10 }
|
|
|
|
|
|
-- This table contains performance metrics for
|
|
-- the AAL2 Common Part Sublayer (CPS).
|
|
-- aal2CpsPerformanceTable augments the base table,
|
|
-- aal2VclTable. For definitions of counters, see
|
|
-- I.363.2 Table 6.
|
|
--
|
|
-- The AAL2 Common Part Sublayer (CPS) Performance
|
|
-- Table
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5
|
|
aal2CpsPerformanceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Aal2CpsPerformanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AAL2 Common Part Sublayer (CPS) Performance
|
|
table. Augments the base table, aal2VclTable.
|
|
|
|
The error indications to Layer Management are
|
|
summarized in this table."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { zhoneAtmAAl2 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1
|
|
aal2CpsPerformanceEntry OBJECT-TYPE
|
|
SYNTAX Aal2CpsPerformanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the AAL2 Common Part Sublayer (CPS)
|
|
Performance Table. Augments aal2VclEntry. Each
|
|
row in the aal2VclTable has a corresponding row
|
|
in the aal2CpsPerformanceTable."
|
|
AUGMENTS { aal2VclEntry }
|
|
::= { aal2CpsPerformanceTable 1 }
|
|
|
|
|
|
Aal2CpsPerformanceEntry ::=
|
|
SEQUENCE {
|
|
aal2CpsPerfSTFParity
|
|
Counter32,
|
|
aal2CpsPerfSTFBadSeq
|
|
Counter32,
|
|
aal2CpsPerfBadCPSLength
|
|
Counter32,
|
|
aal2CpsPerfBadPayloadLength
|
|
Counter32,
|
|
aal2CpsPerfHEC
|
|
Counter32,
|
|
aal2CpsPerfPayloadTooLong
|
|
Counter32,
|
|
aal2CpsPerfRessError
|
|
Counter32,
|
|
aal2CpsPerfTransError
|
|
Counter32,
|
|
aal2CpsPerfIllegalUUI
|
|
Counter32,
|
|
aal2CpsPerfIllegalCID
|
|
Counter32,
|
|
aal2CpsPerfCongestion
|
|
Counter32
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.1
|
|
aal2CpsPerfSTFParity OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The parity of the STF indicates transmission
|
|
errors; the complete CPS-PDU was discarded."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2CpsPerformanceEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.2
|
|
aal2CpsPerfSTFBadSeq OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number of the STF is wrong; if the
|
|
OSF is less than 47, processing starts at the
|
|
octet pointed to by the OSF, otherwise the
|
|
complete CPS-PDU is discarded."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2CpsPerformanceEntry 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.3
|
|
aal2CpsPerfBadCPSLength OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of octets expected for a CPS-Packet
|
|
overlapping into this CPS-PDU does not match
|
|
the information contained in the STF; if the
|
|
value of the OSF is less than 47, processing
|
|
starts at the octet pointed to by the OSF."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2CpsPerformanceEntry 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.4
|
|
aal2CpsPerfBadPayloadLength OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSF of the STF contains a value 48 or
|
|
greater; the complete CPS-PDU is discarded."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2CpsPerformanceEntry 4 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.5
|
|
aal2CpsPerfHEC OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Header Error Control (HEC) Code of a
|
|
CPS-Packet header indicates transmission errors
|
|
in the CPS-Packet header; the unprocessed
|
|
information in the CPS-PDU is discarded."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2CpsPerformanceEntry 5 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.6
|
|
aal2CpsPerfPayloadTooLong OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the received CPS-Packet Payload
|
|
(CPS-SDU) exceeds the maximum length indicated
|
|
in 'Max_SDU_Deliver_Length'."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2CpsPerformanceEntry 6 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.7
|
|
aal2CpsPerfRessError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A partial CPS-Packet has been received previously
|
|
and must be discarded due to errors detected
|
|
before the reassembly of the CPS-Packet could
|
|
be completed."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2CpsPerformanceEntry 7 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.8
|
|
aal2CpsPerfTransError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Header Error Control (HEC) Code of a
|
|
CPS-Packet header that was overlapping a
|
|
CPS-PDU boundary indicates transmission errors
|
|
in the CPS-Packet header; if the value of the
|
|
OSF is less than 47, processing starts at the
|
|
octet pointed to by the OSF."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2CpsPerformanceEntry 8 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.9
|
|
aal2CpsPerfIllegalUUI OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UUI field in the received CPS-Packet header
|
|
contains a value ('28' or '29') that is reserved
|
|
for future standardization."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2CpsPerformanceEntry 9 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.10
|
|
aal2CpsPerfIllegalCID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CID value in the received CPS-Packet header
|
|
is not associated with a SAP."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2CpsPerformanceEntry 10 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.5.1.11
|
|
aal2CpsPerfCongestion OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The congestion happens when the aal2 receiver is ready
|
|
to receive cells but there is no buffer ready. The receiver
|
|
starts dropping cells. The receiver tries to open new buffers
|
|
for cell reception only after the last cell of the discarded
|
|
frame arrives.
|
|
|
|
This variable represents the number of times the receiver
|
|
verified the receive queue for cell reception but the queue
|
|
was busy. This is called congestion event."
|
|
::= { aal2CpsPerformanceEntry 11 }
|
|
|
|
|
|
-- This table contains performance metrics for
|
|
-- the AAL2 I.366.2 Service Specific Convergence
|
|
-- Sublayer (SSCS). aal2SscsI3662PerfTable
|
|
-- should only have entries for I.366.2 type CID's
|
|
-- as provisioned in aal2CidTable.
|
|
--
|
|
-- For definitions of counters, see I.363.2 Table 6.
|
|
--
|
|
-- The AAL2 I.366.2 Service Specific Convergence
|
|
-- Sublayer (SSCS) Performance Table
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.6
|
|
aal2SscsI3662PerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Aal2SscsI3662PerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AAL2 I.366.2 Service Specific Convergence
|
|
Sublayer (SSCS) Performance table."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { zhoneAtmAAl2 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.6.1
|
|
aal2SscsI3662PerfEntry OBJECT-TYPE
|
|
SYNTAX Aal2SscsI3662PerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the AAL2 I.366.2 Service Specific
|
|
Convergence Sublayer (SSCS) Performance Table.
|
|
Each row in the aal2CidTable whose SSCS type
|
|
is I.366.2 has a corresponding row in the
|
|
aal2SscsI3662PerfTable."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
INDEX { ifIndex, atmVclVpi, atmVclVci, aal2Cid }
|
|
::= { aal2SscsI3662PerfTable 1 }
|
|
|
|
|
|
Aal2SscsI3662PerfEntry ::=
|
|
SEQUENCE {
|
|
aal2SscsI3662IllegalUUI
|
|
Counter32,
|
|
aal2SscsI3662Type3CRC
|
|
Counter32,
|
|
aal2SscsI3662ProfileError
|
|
Counter32
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.6.1.1
|
|
aal2SscsI3662IllegalUUI OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The UUI field in the received CPS-Packet header
|
|
contains a value in the reserved ranges (16..22,
|
|
28..30). See I.366.2, Table 12."
|
|
REFERENCE
|
|
"I.363.2 Table 12"
|
|
::= { aal2SscsI3662PerfEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.6.1.2
|
|
aal2SscsI3662Type3CRC OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Type 3 packet using CRC-10 validation with
|
|
a checksum error will increase this counter."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2SscsI3662PerfEntry 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.6.1.3
|
|
aal2SscsI3662ProfileError OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Invalid UUI codepoint and UUI length columns.
|
|
Does not match any Audio Profile entry, based on
|
|
the VCL entry's audio profile index."
|
|
REFERENCE
|
|
"I.363.2 Table 6"
|
|
::= { aal2SscsI3662PerfEntry 3 }
|
|
|
|
|
|
-- This table contains performance metrics for
|
|
-- the AAL2 I.366.1 Service Specific Convergence
|
|
-- Sublayer (SSCS). aal2SscsI3661PerfTable
|
|
-- should only have entries for I.366.1 type CID's
|
|
-- as provisioned in aal2CidTable.
|
|
--
|
|
--
|
|
-- For definitions of counters, see I.366.1.
|
|
--
|
|
-- The AAL2 I.366.1 Service Specific Convergence
|
|
-- Sublayer (SSCS) Performance Table
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.7
|
|
aal2SscsI3661PerfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Aal2SscsI3661PerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AAL2 I.366.1 Service Specific Convergence
|
|
Sublayer (SSCS) Performance table."
|
|
REFERENCE
|
|
"I.366.1"
|
|
::= { zhoneAtmAAl2 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.7.1
|
|
aal2SscsI3661PerfEntry OBJECT-TYPE
|
|
SYNTAX Aal2SscsI3661PerfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the AAL2 I.366.1 Service Specific
|
|
Convergence Sublayer (SSCS) Performance Table.
|
|
Each row in the aal2CidTable whose SSCS type
|
|
is I.366.1 has a corresponding row in the
|
|
aal2SscsI3661PerfTable."
|
|
REFERENCE
|
|
"I.366.1"
|
|
INDEX { ifIndex, atmVclVpi, atmVclVci, aal2Cid }
|
|
::= { aal2SscsI3661PerfTable 1 }
|
|
|
|
|
|
Aal2SscsI3661PerfEntry ::=
|
|
SEQUENCE {
|
|
aal2SscsI3661MsgTooLong
|
|
Counter32,
|
|
aal2SscsI3661RasTimerExpired
|
|
Counter32,
|
|
aal2SscsI3661MsgTooShort
|
|
Counter32,
|
|
aal2SscsI3661BadLength
|
|
Counter32,
|
|
aal2SscsI3661CRC
|
|
Counter32
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.7.1.1
|
|
aal2SscsI3661MsgTooLong OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum permissible size for a reassembled
|
|
SSSAR-SDU ('Max_SDU_Length') has been exceeded."
|
|
REFERENCE
|
|
"I.366.1"
|
|
::= { aal2SscsI3661PerfEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.7.1.2
|
|
aal2SscsI3661RasTimerExpired OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reassembly timer RAS_Timer has expired."
|
|
REFERENCE
|
|
"I.366.1"
|
|
::= { aal2SscsI3661PerfEntry 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.7.1.3
|
|
aal2SscsI3661MsgTooShort OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An SSTED-PDU of length 8 or less has been
|
|
received."
|
|
REFERENCE
|
|
"I.366.1"
|
|
::= { aal2SscsI3661PerfEntry 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.7.1.4
|
|
aal2SscsI3661BadLength OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the Length field in the SSTED-PDU
|
|
does not match the length of the received
|
|
SSTED-PDU."
|
|
REFERENCE
|
|
"I.366.1"
|
|
::= { aal2SscsI3661PerfEntry 4 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.7.1.5
|
|
aal2SscsI3661CRC OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the CRC field is not equal to the
|
|
CRC calculated over the received information."
|
|
REFERENCE
|
|
"I.366.1"
|
|
::= { aal2SscsI3661PerfEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.8
|
|
aal2vpi OBJECT-TYPE
|
|
SYNTAX AtmVpIdentifier
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VPI used for traps defined under aal2Traps."
|
|
::= { zhoneAtmAAl2 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.9
|
|
aal2Vci OBJECT-TYPE
|
|
SYNTAX AtmVcIdentifier
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VCI used for traps defined under aal2Traps."
|
|
::= { zhoneAtmAAl2 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.10
|
|
aal2AlarmConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Aal2AlarmConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains thresholds that are used to control trap
|
|
generation. aal2AlarmConfigTable augments the base table,
|
|
aal2VclTable.
|
|
|
|
All the parameters defined in this table are supported
|
|
on the s100."
|
|
::= { zhoneAtmAAl2 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.10.1
|
|
aal2AlarmConfigEntry OBJECT-TYPE
|
|
SYNTAX Aal2AlarmConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry consists of a list of parameters that
|
|
represents tresholds for the error indications defined
|
|
in aal2CpsPerformanceTable. Each row in the aal2VclTable
|
|
has a corresponding row in the aal2AlarmConfigTable.
|
|
"
|
|
AUGMENTS { aal2VclEntry }
|
|
::= { aal2AlarmConfigTable 1 }
|
|
|
|
|
|
Aal2AlarmConfigEntry ::=
|
|
SEQUENCE {
|
|
aal2AlarmConfigThreshCellLoss
|
|
Integer32,
|
|
aal2AlarmConfigThreshCongestion
|
|
Integer32
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.10.1.1
|
|
aal2AlarmConfigThreshCellLoss OBJECT-TYPE
|
|
SYNTAX Integer32 (0..900)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of bad sequence number of the STF within
|
|
any given 15 minutes performance data collection period,
|
|
which causes the SNMP agent to send an
|
|
aal2PerfCellLossThreshTrap.
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
DEFVAL { 0 }
|
|
::= { aal2AlarmConfigEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.10.1.2
|
|
aal2AlarmConfigThreshCongestion OBJECT-TYPE
|
|
SYNTAX Integer32 (0..900)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of congestion events within any given 15
|
|
minutes performance data collection period,
|
|
which causes the SNMP agent to send an
|
|
aal2PerfCongestionThreshTrap.
|
|
|
|
One trap will be sent per interval per interface.
|
|
A value of `0' will disable the trap."
|
|
DEFVAL { 0 }
|
|
::= { aal2AlarmConfigEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.11
|
|
aal2ElcpPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Aal2ElcpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AAL2 ELCP Port Table.
|
|
|
|
The AAL2 ELCP Port Table contains entries of
|
|
IAD ports associated with the ELCP enabled
|
|
ATM VCC. The provisioned values in the AAL2
|
|
ELCP Port Table supercede the defaults values
|
|
specified in the AAL2 VCL entry.
|
|
"
|
|
::= { zhoneAtmAAl2 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.11.1
|
|
aal2ElcpPortEntry OBJECT-TYPE
|
|
SYNTAX Aal2ElcpPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the aal2ElcpPortTable."
|
|
INDEX { ifIndex, atmVclVpi, atmVclVci, aal2ElcpPortId, aal2ElcpPortType
|
|
}
|
|
::= { aal2ElcpPortTable 1 }
|
|
|
|
|
|
Aal2ElcpPortEntry ::=
|
|
SEQUENCE {
|
|
aal2ElcpPortId
|
|
Integer32,
|
|
aal2ElcpPortType
|
|
INTEGER,
|
|
aal2ElcpPortAudioService
|
|
INTEGER,
|
|
aal2ElcpPortPCMEncoding
|
|
INTEGER,
|
|
aal2ElcpPortMaxLengthFrame
|
|
Integer32,
|
|
aal2ElcpPortMaxSDULength
|
|
Integer32,
|
|
aal2ElcpPortPreferredApIndex
|
|
Integer32,
|
|
aal2ElcpPortRowStatus
|
|
ZhoneRowStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.11.1.1
|
|
aal2ElcpPortId OBJECT-TYPE
|
|
SYNTAX Integer32 (0..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port address to identify an individual PSTN or ISDN port.
|
|
This address must agree with the provisioned port number on
|
|
the CPE side.
|
|
|
|
PSTN and ISDN user ports have their own indenpendent
|
|
numbering space.
|
|
"
|
|
REFERENCE
|
|
"AF-VMOA-0145.000, 5.4.2"
|
|
::= { aal2ElcpPortEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.11.1.2
|
|
aal2ElcpPortType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
pstn(1),
|
|
isdnBra(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port type for a provisioned IAD port for an ELCP
|
|
enabled ATM VCC. Valid types are pstn and isdnBra."
|
|
REFERENCE
|
|
"AF-VMOA-0145.000, 5.4.2"
|
|
::= { aal2ElcpPortEntry 2 }
|
|
|
|
|
|
-- SSCS Default Parameters. Please refer to I.366.2
|
|
-- and STR-VMOA-LES-01-00 Appendix E
|
|
--
|
|
-- I.366.2 SSCS parameters.This parameter can be
|
|
-- taken from the Default VCL values in the absence
|
|
-- of signaling or provisioning on a per channel
|
|
-- basis, either explicit or implicit, the default
|
|
-- SSCS parameters values shall apply to each AAL2
|
|
-- channel within the ATM AAL2 VCC.
|
|
--
|
|
-- Refer to section 4.1.5 in STR-VMOA-LES-01-00.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.11.1.3
|
|
aal2ElcpPortAudioService OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2),
|
|
enabledEchoCancelOff(3),
|
|
enabledDynamic(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Audio Service.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are:
|
|
- enabled.
|
|
- disabled.
|
|
- enabledEchoCancelOff: audio service enabled with echo
|
|
cancellation and silence supression off.
|
|
- enabledDynamic: audio service enabled with ability to
|
|
dynamically disable silence supression, silence detection,
|
|
echo cancellation and compression algorithms on a per-call
|
|
basis.
|
|
|
|
If this value is not set by CLI or ZMS, the agent will
|
|
use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { enabled }
|
|
::= { aal2ElcpPortEntry 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.11.1.4
|
|
aal2ElcpPortPCMEncoding OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
muLaw(1),
|
|
aLaw(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"PCM Encoding.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are muLaw and aLaw. If this
|
|
value is not set by CLI or ZMS, the agent
|
|
will use the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { aLaw }
|
|
::= { aal2ElcpPortEntry 4 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.11.1.5
|
|
aal2ElcpPortMaxLengthFrame OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max length frame mode data.
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are 1..65535. If this value is
|
|
not set by CLI or ZMS, the agent will use
|
|
the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.2, STR-VMOA-LES-01-00 Appendix E"
|
|
DEFVAL { 65535 }
|
|
::= { aal2ElcpPortEntry 5 }
|
|
|
|
|
|
-- SSCS Default Parameters. Please refer to I.366.1
|
|
-- See 7.7.1 for description.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.11.1.6
|
|
aal2ElcpPortMaxSDULength OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65568)
|
|
UNITS "octets"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max_SDU_Length
|
|
|
|
Refer to the corresponding object in the VCL
|
|
table.
|
|
|
|
Valid values are 1..65568. If this value is
|
|
not set by CLI or ZMS, the agent will use
|
|
the AAL2 VCL entry default."
|
|
REFERENCE
|
|
"I.366.1 Section 7.7.1"
|
|
DEFVAL { 1536 }
|
|
::= { aal2ElcpPortEntry 6 }
|
|
|
|
|
|
-- This field points to the default Encoding index for an
|
|
-- Audio Profile Identifier.
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.11.1.7
|
|
aal2ElcpPortPreferredApIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..512)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index for the preferred audio encoding format within
|
|
the Audio Profile. The Index must be an agreed
|
|
operating parameter between the transmitter and
|
|
receiver for both directions. An aal2CidPreferredApIndex
|
|
identifies an audio profile row of the selected audio
|
|
profile at the aal2 Vcl."
|
|
DEFVAL { 1 }
|
|
::= { aal2ElcpPortEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.11.1.8
|
|
aal2ElcpPortRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to control row creation and deletion. The valid enums
|
|
are active(1), createAndGo(4) and destroy(6). Refer to
|
|
Zhone-TC.mib for more details."
|
|
::= { aal2ElcpPortEntry 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.12
|
|
aal2ElcpIgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Aal2ElcpIgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides additional information about an ELCP
|
|
interface group. This table only exists for AAL2 VCL
|
|
entries that are running ELCP protocol. For each AAL2 VCL
|
|
running ELCP, there will be one entry in the aal2ElcpIgTable.
|
|
"
|
|
::= { zhoneAtmAAl2 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.4.2.1.12.1
|
|
aal2ElcpIgEntry OBJECT-TYPE
|
|
SYNTAX Aal2ElcpIgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the aal2ElcpIgTable."
|
|
INDEX { ifIndex, atmVclVpi, atmVclVci }
|
|
::= { aal2ElcpIgTable 1 }
|
|
|
|
|
|
Aal2ElcpIgEntry ::=
|
|
SEQUENCE {
|
|
aal2ElcpIgOperStatus
|
|
AtmVorXOperStatus,
|
|
aal2ElcpIgOperStatusChangeCount
|
|
Counter32,
|
|
aal2ElcpIgLapvReceived
|
|
Counter32,
|
|
aal2ElcpIgLapvSent
|
|
Counter32
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.12.1.1
|
|
aal2ElcpIgOperStatus OBJECT-TYPE
|
|
SYNTAX AtmVorXOperStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of an ELCP interface group."
|
|
::= { aal2ElcpIgEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.12.1.2
|
|
aal2ElcpIgOperStatusChangeCount OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the aal2ElcpIgOperStatus has changed."
|
|
::= { aal2ElcpIgEntry 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.12.1.3
|
|
aal2ElcpIgLapvReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of LAPV frames received by this interface group."
|
|
::= { aal2ElcpIgEntry 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.4.2.1.12.1.4
|
|
aal2ElcpIgLapvSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of LAPV frames sent from this interface group."
|
|
::= { aal2ElcpIgEntry 4 }
|
|
|
|
|
|
|
|
END
|
|
|
|
--
|
|
-- comAtmAal2.mib
|
|
--
|