4816 lines
147 KiB
Plaintext
4816 lines
147 KiB
Plaintext
--
|
|
-- genSystem.mib
|
|
-- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 285
|
|
-- Tuesday, June 17, 2014 at 09:39:10
|
|
--
|
|
|
|
ZHONE-SYSTEM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IANAifType
|
|
FROM IANAifType-MIB
|
|
ifIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
TimeTicks, IpAddress, Integer32, Unsigned32, Counter32,
|
|
OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
TruthValue, DateAndTime, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
ipIfLgId, ipIfVpi, ipIfVci, ipIfAddr
|
|
FROM ZHONE-COM-IP-REC-MIB
|
|
zhoneShelfNumber, zhoneSlotNumber, pportNumber, subPortNumber
|
|
FROM ZHONE-INTERFACE-TRANSLATION-MIB
|
|
zhone, zhoneSystem, zhoneShelfIndex, zhoneSlotIndex, zhoneTrapModules,
|
|
zhoneModules, zhoneShelfIndex, zhoneSlotIndex
|
|
FROM Zhone
|
|
ZhoneAdminString, ZhoneRowStatus, ZhoneShelfValue, ZhoneSlotValue, ZhoneFileName,
|
|
ZhoneIfType, ZhoneCountryCode, ZhoneCardLineType, ZhoneCardType, ZhoneAlarmSeverity,
|
|
ZhoneAlarmTypeId
|
|
FROM Zhone-TC;
|
|
|
|
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
--
|
|
-- Command to generate protection layer:
|
|
-- /vob/zhonetools/bin/pahrser.pl rfc2514.mib rfc1907.mib \
|
|
-- iftype.mib rfc2233.mib Zhone.mib Zhone-TC.mib genSystem.mib
|
|
--
|
|
-- Command to generate mib handler (this example put all output
|
|
-- in a file called fileSystemHdlr.c but you can use any filename):
|
|
-- /vob/EPILOGUE/binaries/emissary/solaris/mibcomp Zhone.mib \
|
|
-- Zhone-TC.mib iftype.mib rfc1907.mib rfc2233.mib rfc2571.mib \
|
|
-- rfc2514.mib comIpRD.mib comIpRec.mib genIntfTranslationTable.mib \
|
|
-- -stub -o fileSystemHdlrs.c genSystem.mib
|
|
--
|
|
-- 1.3.6.1.4.1.5504.6.2
|
|
zhoneSystemModule MODULE-IDENTITY
|
|
LAST-UPDATED "201406171200Z" -- June 17, 2014 at 12:00 GMT
|
|
ORGANIZATION
|
|
"Zhone Technologies, Inc."
|
|
CONTACT-INFO
|
|
" Postal:
|
|
Zhone Technologies, Inc.
|
|
@ Zhone Way
|
|
7001 Oakport Street
|
|
Oakland, CA 94621
|
|
USA
|
|
Toll-Free: +1 877-ZHONE20 (+1 877-946-6320)
|
|
Tel: +1-510-777-7000
|
|
Fax: +1-510-777-7001
|
|
E-mail: support@zhone.com"
|
|
DESCRIPTION
|
|
"This module contains the system generic variables that are
|
|
complete for the entire system. Note that some functional
|
|
entities are maintained in their own mib as they will be
|
|
included only when their functionality is included for that
|
|
particular Zhone platform."
|
|
REVISION "201406170522Z" -- June 17, 2014 at 05:22 GMT
|
|
DESCRIPTION
|
|
"Added new fields zhoneSystemOutletTemperatureHighThreshold &
|
|
zhoneSystemOutletTemperatureLowThreshold to the
|
|
zhoneSystemConfiguration group"
|
|
REVISION "201403232131Z" -- March 23, 2014 at 21:31 GMT
|
|
DESCRIPTION
|
|
"Added persistentLogging support"
|
|
REVISION "201402030329Z" -- February 03, 2014 at 03:29 GMT
|
|
DESCRIPTION
|
|
"Changed the sysProfOptions from cfmoff to cfmon."
|
|
REVISION "201311262245Z" -- November 26, 2013 at 22:45 GMT
|
|
DESCRIPTION
|
|
"Added new option bit flag: cfmoff and added new snmpv3includingZMS enum in snmpversion."
|
|
REVISION "201306211544Z" -- June 21, 2013 at 15:44 GMT
|
|
DESCRIPTION
|
|
"added new option bitflags: enablexcardlinkagg and fiberlan"
|
|
REVISION "201305161723Z" -- May 16, 2013 at 17:23 GMT
|
|
DESCRIPTION
|
|
"Added bits nol3bridgetable+ipg88bits+disdefpktrules bits to zhoneSystemConfigurationOptions field"
|
|
REVISION "201212270429Z" -- December 27, 2012 at 04:29 GMT
|
|
DESCRIPTION
|
|
"Added zhoneSntpDaylightSavingStart & zhoneSntpDaylightSavingEnd fields to n
|
|
tp-config-profile"
|
|
REVISION "201210181311Z" -- October 18, 2012 at 13:11 GMT
|
|
DESCRIPTION
|
|
"Addd snmpVersion object."
|
|
REVISION "201204101128Z" -- April 10, 2012 at 11:28 GMT
|
|
DESCRIPTION
|
|
"1. Change range of zhoneSystemConfigurationReservedVlanIdStart.
|
|
2. Add comments to zhoneSystemConfigurationReservedVlanIdCount."
|
|
REVISION "201203260932Z" -- March 26, 2012 at 09:32 GMT
|
|
DESCRIPTION
|
|
"1. Add reserved VLAN IDs to system profile.
|
|
2. Add GROUPs to eliminate warning messages"
|
|
REVISION "201203201600Z" -- March 20, 2012 at 16:00 GMT
|
|
DESCRIPTION
|
|
"Add utc time trap binding"
|
|
REVISION "201112201756Z" -- December 20, 2011 at 17:56 GMT
|
|
DESCRIPTION
|
|
"Add backup/restore options to zhoneSysSwAdmin"
|
|
REVISION "201112081200Z" -- December 08, 2011 at 12:00 GMT
|
|
DESCRIPTION
|
|
"Add radiusThenCraft value to zhoneSystemUserAuthMethod OID."
|
|
REVISION "201102171334Z" -- February 17, 2011 at 13:34 GMT
|
|
DESCRIPTION
|
|
"Added zhoneSnmpErrorStatusTable.
|
|
Added cardIsStandbyWithActiveLinks(5)
|
|
to zhoneSysCardRedundancyOperStatus."
|
|
REVISION "201102080655Z" -- February 08, 2011 at 06:55 GMT
|
|
DESCRIPTION
|
|
"Double length of zhoneSysSwRemoteFilePath to allow for CPE
|
|
Config Manager combined base-path, specific-path and
|
|
specific-config-filename for downloading."
|
|
REVISION "201005181000Z" -- May 18, 2010 at 10:00 GMT
|
|
DESCRIPTION
|
|
"Added cpeMgr stub under zhone.zhoneGeneric.zhoneSystem.
|
|
This will be used by CPE Configuration Manager and other
|
|
cpeMgr releated objects."
|
|
REVISION "200904231448Z" -- April 23, 2009 at 14:48 GMT
|
|
DESCRIPTION
|
|
"zhoneSystemWebInterface is changed
|
|
from read-only to read-write"
|
|
REVISION "200904200928Z" -- April 20, 2009 at 09:28 GMT
|
|
DESCRIPTION
|
|
"Add zhoneSystemConfigurationOptions"
|
|
REVISION "200904141707Z" -- April 14, 2009 at 17:07 GMT
|
|
DESCRIPTION
|
|
"Deprecate ZhoneZmsBlockCli trap."
|
|
REVISION "200810232257Z" -- October 23, 2008 at 22:57 GMT
|
|
DESCRIPTION
|
|
"Changed MTAC names to TAC."
|
|
REVISION "200810071238Z" -- October 07, 2008 at 12:38 GMT
|
|
DESCRIPTION
|
|
"Add configScriptActivate and configDatabaseActivate
|
|
values to the zhoneSysSwAdmin object."
|
|
REVISION "200809171320Z" -- September 17, 2008 at 13:20 GMT
|
|
DESCRIPTION
|
|
"Add webInterface field to system prof"
|
|
REVISION "200807102015Z" -- July 10, 2008 at 20:15 GMT
|
|
DESCRIPTION
|
|
"Expand vpiVciRamge enum to include vpi-15-vci127"
|
|
REVISION "200806081115Z" -- June 08, 2008 at 11:15 GMT
|
|
DESCRIPTION
|
|
"V01.24.00 - add zhoneSystemSecureFTP."
|
|
REVISION "200712141520Z" -- December 14, 2007 at 15:20 GMT
|
|
DESCRIPTION
|
|
"V01.23.00 - Add redundancyUnsafe trap"
|
|
REVISION "200711021110Z" -- November 02, 2007 at 11:10 GMT
|
|
DESCRIPTION
|
|
"V01.22.00 Add vbnrt5rt95cbr."
|
|
REVISION "200703261624Z" -- March 26, 2007 at 16:24 GMT
|
|
DESCRIPTION
|
|
"V01.21.00 - add zhoneSysCardInitString"
|
|
REVISION "200611291511Z" -- November 29, 2006 at 15:11 GMT
|
|
DESCRIPTION
|
|
"V01.20.00 - added zhoneSystemUserAuthMethod and zhoneSystemRadiusAuthIndex."
|
|
REVISION "200610171457Z" -- October 17, 2006 at 14:57 GMT
|
|
DESCRIPTION
|
|
"Add zhoneSysCardLineVoltage and zhoneSysCardVpiVciRange"
|
|
REVISION "200606161314Z" -- June 16, 2006 at 13:14 GMT
|
|
DESCRIPTION
|
|
"V01.18.00 - add zhoneAlarmLevelsEnabled."
|
|
REVISION "200605220952Z" -- May 22, 2006 at 09:52 GMT
|
|
DESCRIPTION
|
|
"V01.17.00 - Change Feature Flag for File System
|
|
and Software Upgrade keywords."
|
|
REVISION "200605171634Z" -- May 17, 2006 at 16:34 GMT
|
|
DESCRIPTION
|
|
"V01.16.00 - missing the letter t in zhoneSoftwareUpgrade."
|
|
REVISION "200603151236Z" -- March 15, 2006 at 12:36 GMT
|
|
DESCRIPTION
|
|
"V01.15.00 - add zhoneFileTable and
|
|
zhoneSoftwareUpgrade objects."
|
|
REVISION "200505120913Z" -- May 12, 2005 at 09:13 GMT
|
|
DESCRIPTION
|
|
"V01.14.00 - Added comment regarding support of card-line-type change for packet voice cards.
|
|
"
|
|
REVISION "200501181443Z" -- January 18, 2005 at 14:43 GMT
|
|
DESCRIPTION
|
|
"V01.14.00 - Add zhoneTrapConfigSyncReset
|
|
trap and supporting object bindings."
|
|
REVISION "200407021230Z" -- July 02, 2004 at 12:30 GMT
|
|
DESCRIPTION
|
|
"V01.13.00
|
|
Modified Video_System_Profile to carry more
|
|
EPG information, needed by zrg family."
|
|
REVISION "200402181500Z" -- February 18, 2004 at 15:00 GMT
|
|
DESCRIPTION
|
|
"V01.12.00
|
|
Added zhoneTrapAlarmAction, zhoneTrapAlarmId
|
|
and zhoneTrapAlarmSeverity."
|
|
REVISION "200312041418Z" -- December 04, 2003 at 14:18 GMT
|
|
DESCRIPTION
|
|
"Addition of the zhoneCallDetailRecConfiguration object."
|
|
REVISION "200311081430Z" -- November 08, 2003 at 14:30 GMT
|
|
DESCRIPTION
|
|
"V01.11.25 - Added zhoneZmsBlockCliChange trap."
|
|
REVISION "200304231626Z" -- April 23, 2003 at 16:26 GMT
|
|
DESCRIPTION
|
|
"v01.11.24 - Changed feature flag access to video system profile from MALC_VIDEO to ATM_IP_MULTICAST."
|
|
REVISION "200303191035Z" -- March 19, 2003 at 10:35 GMT
|
|
DESCRIPTION
|
|
"V01.11.23 - Added RowStatus to VideoSystemConfigurationEntry"
|
|
REVISION "200302201100Z" -- February 20, 2003 at 11:00 GMT
|
|
DESCRIPTION
|
|
"V01.11.22 - Added video system profile."
|
|
REVISION "200211191115Z" -- November 19, 2002 at 11:15 GMT
|
|
DESCRIPTION
|
|
"V01.11.21 - add bulk statistics objects"
|
|
REVISION "200210291533Z" -- October 29, 2002 at 15:33 GMT
|
|
DESCRIPTION
|
|
"V01.11.20 - change zhoneSysRebootCardType to use ZhoneCardType from Zhone-TC.mib"
|
|
REVISION "200210241836Z" -- October 24, 2002 at 18:36 GMT
|
|
DESCRIPTION
|
|
"V01.11.19 - use zhone-tc for cardtype"
|
|
REVISION "200210181603Z" -- October 18, 2002 at 16:03 GMT
|
|
DESCRIPTION
|
|
"V01.11.18 - Changed zhoneSysCardLineType
|
|
to use TC ZhoneCardLineType."
|
|
REVISION "200209231536Z" -- September 23, 2002 at 15:36 GMT
|
|
DESCRIPTION
|
|
"V01.11.17 Added zhoneSntpConfiguration"
|
|
REVISION "200206111704Z" -- June 11, 2002 at 17:04 GMT
|
|
DESCRIPTION
|
|
"V01.11.16 - Added malcT1E1Tdm, malcAdslAc6, malcAdslAc6Post, malcAdslAc6Splt, malcAdslAc6AnxB and malcAdslAc6AnxBSplt. Changed malcAdslAc5B to malcAdslAc5AnxB."
|
|
REVISION "200206111401Z" -- June 11, 2002 at 14:01 GMT
|
|
DESCRIPTION
|
|
"V01.11.15 - Add support for image flash, file upload/download and dump/restore"
|
|
REVISION "200206030857Z" -- June 03, 2002 at 08:57 GMT
|
|
DESCRIPTION
|
|
"V01.11.14 - Added zhoneSystemVoiceBandwidthCheck to zhoneSystemConfiguration"
|
|
REVISION "200205241240Z" -- May 24, 2002 at 12:40 GMT
|
|
DESCRIPTION
|
|
"V01.11.13 - Added malcAdslAc5B card type"
|
|
REVISION "200205091742Z" -- May 09, 2002 at 17:42 GMT
|
|
DESCRIPTION
|
|
"V01.11.12 - Added zhoneSystemRevertiveClockSource to zhoneSystemConfiguration"
|
|
REVISION "200203221512Z" -- March 22, 2002 at 15:12 GMT
|
|
DESCRIPTION
|
|
"V01.11.11 - Added malcOc3 card type"
|
|
REVISION "200201101609Z" -- January 10, 2002 at 16:09 GMT
|
|
DESCRIPTION
|
|
"V01.11.10 - Added Console Logging variable to make the consol logging feature persistent"
|
|
REVISION "200201101604Z" -- January 10, 2002 at 16:04 GMT
|
|
DESCRIPTION
|
|
"V01.11.09 - Clarify description of zhoneCardRedundnacyTable that the row cannot be deleted, but is autmatically deleted with a corresponding delete of zhoneSysCardSoftwareConfigTable"
|
|
REVISION "200111261559Z" -- November 26, 2001 at 15:59 GMT
|
|
DESCRIPTION
|
|
"V01.11.08 - Add ATM qos configuration values for malc uplink."
|
|
REVISION "200111161819Z" -- November 16, 2001 at 18:19 GMT
|
|
DESCRIPTION
|
|
"V01.11.07 - Added malcAdslAc5(5010) card type."
|
|
REVISION "200111011714Z" -- November 01, 2001 at 17:14 GMT
|
|
DESCRIPTION
|
|
"V01.11.06 - Updated description for cardAtmConfiguration"
|
|
REVISION "200110291219Z" -- October 29, 2001 at 12:19 GMT
|
|
DESCRIPTION
|
|
"V01.11.05 - Updated description for cardAtmConfiguration"
|
|
REVISION "200110252009Z" -- October 25, 2001 at 20:09 GMT
|
|
DESCRIPTION
|
|
"V01.11.04 - Change system clock tx clock mode to read-only and add description."
|
|
REVISION "200110221710Z" -- October 22, 2001 at 17:10 GMT
|
|
DESCRIPTION
|
|
"V01.11.03 - Add tdmT1e1 card type"
|
|
REVISION "200110191137Z" -- October 19, 2001 at 11:37 GMT
|
|
DESCRIPTION
|
|
"V01.11.02 - Add system clock status fields."
|
|
REVISION "200110181030Z" -- October 18, 2001 at 10:30 GMT
|
|
DESCRIPTION
|
|
"V01.11.01 - Added e3 and t3 to card-line-type."
|
|
REVISION "200110171351Z" -- October 17, 2001 at 13:51 GMT
|
|
DESCRIPTION
|
|
"V01.11.00 - Added system clock PERSISTENT profile table."
|
|
REVISION "200110051208Z" -- October 05, 2001 at 12:08 GMT
|
|
DESCRIPTION
|
|
"V01.10.07 - Added malcDs3 card type."
|
|
REVISION "200110021119Z" -- October 02, 2001 at 11:19 GMT
|
|
DESCRIPTION
|
|
"V01.10.06 - Added cardAtmConfiguration"
|
|
REVISION "200109251450Z" -- September 25, 2001 at 14:50 GMT
|
|
DESCRIPTION
|
|
"V01.10.05 - Add two new line types for card."
|
|
REVISION "200108301745Z" -- August 30, 2001 at 17:45 GMT
|
|
DESCRIPTION
|
|
"V01.10.04 - add e1-ima and t1-ima new line types."
|
|
REVISION "200108221443Z" -- August 22, 2001 at 14:43 GMT
|
|
DESCRIPTION
|
|
"V01.10.03 - Added zhoneSysCardLineType."
|
|
REVISION "200108101337Z" -- August 10, 2001 at 13:37 GMT
|
|
DESCRIPTION
|
|
"V01.10.02 - Added Atm Trnk Card Types."
|
|
REVISION "200108011620Z" -- August 01, 2001 at 16:20 GMT
|
|
DESCRIPTION
|
|
"V01.10.01 -Corrected Mark up order for Card Redundancy.."
|
|
REVISION "200108011620Z" -- August 01, 2001 at 16:20 GMT
|
|
DESCRIPTION
|
|
"V01.10.00 - Replace enum list with ZhoneCountryCode
|
|
textual convention for zhoneSystemConfigurationCountryRegion."
|
|
REVISION "200107301532Z" -- July 30, 2001 at 15:32 GMT
|
|
DESCRIPTION
|
|
"V01.09.00 - Add zhoneTrapPortType and zhoneTrapPortTypeExtension to the zhoneTrapsTable."
|
|
REVISION "200106061753Z" -- June 06, 2001 at 17:53 GMT
|
|
DESCRIPTION
|
|
"V01.08.00 - add zhoneTrapsGatewayTrapServerAddress"
|
|
REVISION "200105251531Z" -- May 25, 2001 at 15:31 GMT
|
|
DESCRIPTION
|
|
"V01.07.00 -- Card Redundancy"
|
|
REVISION "200105170959Z" -- May 17, 2001 at 09:59 GMT
|
|
DESCRIPTION
|
|
"V01.06.00 - add primaryClockSource"
|
|
REVISION "200104271116Z" -- April 27, 2001 at 11:16 GMT
|
|
DESCRIPTION
|
|
"V01.05.07 - add atmTrnkCr under zhoneSwCardType,
|
|
zhoneSysCardSwType, zhoneSysRebootCardType."
|
|
REVISION "200102181555Z" -- February 18, 2001 at 15:55 GMT
|
|
DESCRIPTION
|
|
"V01.05.06 - add zhoneSystemConfigurationCountryRegion under
|
|
zhoneSystemConfiguration."
|
|
REVISION "200102161312Z" -- February 16, 2001 at 13:12 GMT
|
|
DESCRIPTION
|
|
"V01.05.05 -- add new trap for zhone SNMP sub agent timeout"
|
|
REVISION "200102121906Z" -- February 12, 2001 at 19:06 GMT
|
|
DESCRIPTION
|
|
"V01.05.04 - change zhoneAdminCommunityName index to IMPLIED"
|
|
REVISION "200101221414Z" -- January 22, 2001 at 14:14 GMT
|
|
DESCRIPTION
|
|
"V01.05.03 - Add MALC card types."
|
|
REVISION "200101161344Z" -- January 16, 2001 at 13:44 GMT
|
|
DESCRIPTION
|
|
"V01.05.02 - Fix some comments"
|
|
REVISION "200012011216Z" -- December 01, 2000 at 12:16 GMT
|
|
DESCRIPTION
|
|
"V01.05.01 - Change markup to reflect latest MIB layout."
|
|
REVISION "200011111227Z" -- November 11, 2000 at 12:27 GMT
|
|
DESCRIPTION
|
|
"V01.05.00 - New fields:
|
|
date and system time
|
|
user definition table
|
|
sw download entries.
|
|
Also changed trap seq. number
|
|
to be read-only from
|
|
read-create."
|
|
REVISION "200011071209Z" -- November 07, 2000 at 12:09 GMT
|
|
DESCRIPTION
|
|
"V01.04.00 - Added catWtn for Wireless."
|
|
REVISION "200010171936Z" -- October 17, 2000 at 19:36 GMT
|
|
DESCRIPTION
|
|
"V01.03.00 - Added trapResetSequenceNumber to zhoneTrapFlags."
|
|
REVISION "200009151707Z" -- September 15, 2000 at 17:07 GMT
|
|
DESCRIPTION
|
|
"V01.02.00 - Added the Zhone CPE connection down/up Traps"
|
|
REVISION "200009121802Z" -- September 12, 2000 at 18:02 GMT
|
|
DESCRIPTION
|
|
"V01.01.00 - Added the config synch user name and password"
|
|
REVISION "200009121801Z" -- September 12, 2000 at 18:01 GMT
|
|
DESCRIPTION
|
|
"V01.00.00 - Initial Release"
|
|
::= { zhoneModules 2 }
|
|
|
|
|
|
|
|
--
|
|
-- Textual conventions
|
|
--
|
|
|
|
ZhoneRedundancyWeight ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Preference values for redundancy
|
|
"
|
|
SYNTAX INTEGER
|
|
{
|
|
neverActive(1),
|
|
noPreference(2),
|
|
slightPreference(3),
|
|
mediumPreference(4),
|
|
highPreference(5)
|
|
}
|
|
|
|
ZhoneLocalTimeZone ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"World time zones:
|
|
internationalDateLineWest (GMT-12:00 hrs)
|
|
nome (GMT-11:00)
|
|
hawaii(GMT-10:00)
|
|
yukon(GMT-9:00)
|
|
pacific(GMT-8:00)
|
|
mountain(GMT-7:00)
|
|
central(GMT-6:00)
|
|
eastern(GMT-5:00)
|
|
atlantic(GMT-4:00)
|
|
newfoundland(GMT-3:30)
|
|
brasilia(GMT-3:00)
|
|
azores(GMT-2:00),
|
|
westAfrica(GMT-1:00)
|
|
gmt(GMT/UTC)
|
|
centralEuropean(GMT+1:00)
|
|
easternEurope(GMT+2:00)
|
|
baghdad(GMT+3:00)
|
|
tehran(GMT+3:30)
|
|
uae(GMT+4:00)
|
|
afghanistan(GMT+4:30)
|
|
islamabad(GMT+5:00)
|
|
india(GMT+5:30)
|
|
kathmandu(GMT+5:45)
|
|
dhaka(GMT+6:00)
|
|
rangoon(GMT+6:30)
|
|
bangkok(GMT+7:00)
|
|
chinaCoast(GMT+8:00)
|
|
japan(GMT+9:00)
|
|
australia(GMT+9:30)
|
|
guam(GMT+10:00)
|
|
magadan(GMT+11:00)
|
|
newZealand(GMT+12:00)
|
|
rawakiIslands(GMT+13:00)
|
|
lineIslands(GMT+14:00)"
|
|
SYNTAX INTEGER
|
|
{
|
|
internationalDateLineWest(1),
|
|
nome(2),
|
|
hawaii(3),
|
|
yukon(4),
|
|
pacific(5),
|
|
mountain(6),
|
|
central(7),
|
|
eastern(8),
|
|
atlantic(9),
|
|
newfoundland(10),
|
|
brasilia(11),
|
|
azores(12),
|
|
westAfrica(13),
|
|
gmt(14),
|
|
centralEuropean(15),
|
|
easternEurope(16),
|
|
baghdad(17),
|
|
tehran(18),
|
|
uae(19),
|
|
afghanistan(20),
|
|
islamabad(21),
|
|
india(22),
|
|
kathmandu(23),
|
|
dhaka(24),
|
|
rangoon(25),
|
|
bangkok(26),
|
|
chinaCoast(27),
|
|
japan(28),
|
|
australia(29),
|
|
guam(30),
|
|
magadan(31),
|
|
newZealand(32),
|
|
rawakiIslands(33),
|
|
lineIslands(34)
|
|
}
|
|
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.1
|
|
zhoneZms OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The following variables are associated with the state of
|
|
existence and connectivity with the Zhone Management System
|
|
(ZMS)."
|
|
::= { zhoneSystem 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.1.1
|
|
zhoneZmsExists OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies whether or not this device is being managed by the Zhone
|
|
Management System. This is only settable by the management system and
|
|
NOT by the CLI as it indicates existence of the manager. Different
|
|
operations are performed based on this setting (i.e. no configuration
|
|
synchronization processing is performed if there is no Zhone Management
|
|
System).
|
|
|
|
Default value is 'false'."
|
|
::= { zhoneZms 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.1.2
|
|
zhoneZmsConnectionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
inactive(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of the connection between this device and the Zhone
|
|
Management System, if one exists. This value can either be set
|
|
directly by ZMS or by the device internally when a SNMP request
|
|
is processed from the ZMS. For devices that are being proxied by
|
|
another entity, since they are not being polled by ZMS, will
|
|
set this state according to the communication channel state
|
|
between this device and the connected entity.
|
|
|
|
Default value is 'inactive'."
|
|
::= { zhoneZms 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.1.3
|
|
zhoneZmsIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the ZMS IP address for which configuration synchronization
|
|
messages and any other special handling is performed. This can
|
|
be set either via CLI or ZMS."
|
|
::= { zhoneZms 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.1.4
|
|
zhoneZmsBlockCli OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If TRUE, CLI only allows 'show' commands and cannot
|
|
modify/add any data records. This is used by ZMS
|
|
to prevent race conditions and to allow only single
|
|
access to system resources especially during
|
|
problem analysis times.
|
|
|
|
Default value is 'false'."
|
|
::= { zhoneZms 4 }
|
|
|
|
|
|
-- The Zhone Trap information is information used to provide a
|
|
-- reliable trap mechanism between the device and the Zhone
|
|
-- Management System. There are two trap flows utilized between the
|
|
-- device and any fault management system. The first is used for most
|
|
-- traps generated by the device where an incremental sequence number
|
|
-- is used. It is then up to the FMS to indicated any traps that
|
|
-- it missed asking for retransmission starting at a particular
|
|
-- sequence number. The other type is an Acknowledged trap where
|
|
-- only one trap will be outstanding at one time. This will
|
|
-- be a separate sequence number than the unacknowledged flow.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2
|
|
zhoneTraps OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the trap information related to
|
|
handling device to ZMS traps. "
|
|
::= { zhoneSystem 2 }
|
|
|
|
|
|
-- The Table defining the list of trap destinations and associated trap
|
|
-- message exchange handling.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1
|
|
zhoneTrapsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneTrapsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone Traps Table
|
|
"
|
|
::= { zhoneTraps 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1
|
|
zhoneTrapsEntry OBJECT-TYPE
|
|
SYNTAX ZhoneTrapsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry per trap destination."
|
|
INDEX { zhoneTrapsDestination }
|
|
::= { zhoneTrapsTable 1 }
|
|
|
|
|
|
ZhoneTrapsEntry ::=
|
|
SEQUENCE {
|
|
zhoneTrapsDestination
|
|
IpAddress,
|
|
zhoneTrapsCommunityName
|
|
ZhoneAdminString,
|
|
zhoneTrapsSequenceNumber
|
|
Unsigned32,
|
|
zhoneTrapsResendSequenceNumber
|
|
Integer32,
|
|
zhoneTrapsAckedSequenceNumber
|
|
Unsigned32,
|
|
zhoneTrapsSeverity
|
|
INTEGER,
|
|
zhoneTrapsAllowedCategories
|
|
BITS,
|
|
zhoneTrapsAdminStatus
|
|
INTEGER,
|
|
zhoneTrapsRowStatus
|
|
ZhoneRowStatus,
|
|
zhoneTrapsGatewayTrapServerAddress
|
|
ZhoneAdminString
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1.1
|
|
zhoneTrapsDestination OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The location to be send traps."
|
|
::= { zhoneTrapsEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1.2
|
|
zhoneTrapsCommunityName OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Community name to be sent in all traps sent to this destination. This
|
|
field is defaulted to NULL so a null string will be sent to the
|
|
destination."
|
|
::= { zhoneTrapsEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1.3
|
|
zhoneTrapsSequenceNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Next sequence number to be sent as part of a trap
|
|
generated by the device. The sequence number has two uses. In
|
|
one case,it is the sequence number of the non-acknowledge traps
|
|
and has a range of 0-2147483647. While the acknowledge sequence
|
|
number range is 2147483648-4294967295. This field wraps to
|
|
the appropriate '0' value (0 or 2147483648) for it's range."
|
|
::= { zhoneTrapsEntry 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1.4
|
|
zhoneTrapsResendSequenceNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is set by the ZMS in order
|
|
to have the device resend saved traps because one
|
|
or more were lost in transmission. The device will
|
|
resend traps starting at this sequence number. Note
|
|
that due to resource constraints not all traps may
|
|
be available to be resent. The first trap resent will
|
|
indicate that this is a resent and whether or not
|
|
any traps were deleted/lost.
|
|
|
|
This is used only on the unacknowledge trap flow. This is
|
|
the only indication of whether or not any traps have
|
|
been acknowledged.
|
|
|
|
The value returned is always 0 as setting this field
|
|
only causes restarting of the traps with this number."
|
|
DEFVAL { 0 }
|
|
::= { zhoneTrapsEntry 4 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1.5
|
|
zhoneTrapsAckedSequenceNumber OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Acknowledged trap sequence number. This field is set
|
|
by the ZMS in order to acknowledge a trap sent
|
|
by the device with the Request Acknowledge flag
|
|
set to YES. There will be only one trap will be
|
|
outstanding on this flow (acknowledged flow)at one time so
|
|
this should be the last sequence number sent. If not, it
|
|
is ignored."
|
|
::= { zhoneTrapsEntry 5 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1.6
|
|
zhoneTrapsSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
critical(1),
|
|
severe(2),
|
|
moderate(3),
|
|
low(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Trap severity level which at this level or higher, traps will
|
|
be sent to this destination."
|
|
DEFVAL { low }
|
|
::= { zhoneTrapsEntry 6 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1.7
|
|
zhoneTrapsAllowedCategories OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
catAdmin(0),
|
|
catLine(1),
|
|
catVoice(2),
|
|
catIP(3),
|
|
catRip(4),
|
|
catRadio(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Array of allowed categories to be sent to this particular
|
|
trap destination. This field is not currently implemented
|
|
and is reserved for future use."
|
|
::= { zhoneTrapsEntry 7 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1.8
|
|
zhoneTrapsAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether traps should be enabled or disabled for this particular
|
|
IP address."
|
|
DEFVAL { enabled }
|
|
::= { zhoneTrapsEntry 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1.9
|
|
zhoneTrapsRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status in order to create the entry for this
|
|
destination. There are no required fields on a create
|
|
besides the obvious index of the ip address of the
|
|
destination."
|
|
::= { zhoneTrapsEntry 9 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2.1.1.10
|
|
zhoneTrapsGatewayTrapServerAddress OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Gateway Trap Server Address is used to locate the Gateway.
|
|
Trap Server. This field is defaulted 0,0,0."
|
|
DEFVAL { "none" }
|
|
::= { zhoneTrapsEntry 10 }
|
|
|
|
|
|
-- The following define common trap OIDs to be used in all traps sent
|
|
-- to the fault manager service.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.2.2
|
|
zhoneTrapVersion OBJECT-TYPE
|
|
SYNTAX INTEGER { version1(1) }
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Version number of the format of the trap. Any changes to
|
|
the common area of a trap require a bump of this number."
|
|
::= { zhoneTraps 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.3
|
|
zhoneTrapFlags OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
trapAcknowledge(0),
|
|
trapOutOfSequence(1),
|
|
trapResetSequenceNumber(2)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is sent with all traps and contains flags related
|
|
to this trap.
|
|
|
|
trapAcknolwedge: If this bit is set, it indicates to the ZMS
|
|
that the trap must be acknowledged.
|
|
Acknowledgement is accomplished by the ZMS
|
|
sending a SET request to the variable
|
|
zhoneTrapsAckedSequenceNumber in the
|
|
zhoneTrapsTable. See the trap sequence number
|
|
field description (value is 2147483648 and
|
|
higher.
|
|
trapOutOfSequence: If set, it indicates that this trap is being
|
|
sent out of sequence from what the trap
|
|
receiver is expecting. The specific occurence is
|
|
when the trap receiver detects lost traps and
|
|
requests resending of traps starting from a
|
|
specific sequence number (see
|
|
zhoneTrapsResendSequenceNumber) but the system
|
|
does not have all these traps. Example:
|
|
- traps 400-600 sent to the trap receiver.
|
|
- trap 500 is lost
|
|
- trap receiver requests resend of traps 500 and
|
|
up.
|
|
- system only has 550-600 saved in memory.
|
|
- trap 550 resent with trapOutOfSequence set.
|
|
- trap 551 and above resent with trapOutOfSequence
|
|
reset.
|
|
trapResetSequenceNumber: If set, the sender of this trap has
|
|
reset the trap sequence number for this trap
|
|
destination. It is indicating to the ZMS to
|
|
also reset its sequence numbers."
|
|
::= { zhoneTraps 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.4
|
|
zhoneTrapShelf OBJECT-TYPE
|
|
SYNTAX ZhoneShelfValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is sent with all traps. This contains the
|
|
value of the shelf that originated the trap."
|
|
::= { zhoneTraps 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.5
|
|
zhoneTrapSlot OBJECT-TYPE
|
|
SYNTAX ZhoneSlotValue
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is sent with all traps. This contains the
|
|
value of the slot that originated the trap."
|
|
::= { zhoneTraps 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.6
|
|
zhoneTrapPort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is sent with all traps. This contains the
|
|
value of the port that originated the trap. If this is a
|
|
system or card level trap (no port is associated with the trap),
|
|
this value is 0."
|
|
::= { zhoneTraps 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.7
|
|
zhoneTrapSubPort OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is sent with all traps. This contains the
|
|
value of the subport that originated the trap. If this is a
|
|
system or card level trap (no port is associated with the trap),
|
|
this value is 0. It may also be 0 if not subports are associated
|
|
with this physical port such as in the case of an ethernet port."
|
|
::= { zhoneTraps 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.8
|
|
zhoneTrapProviderId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique service provider ID. This value is used
|
|
throughout the management system to link objects with
|
|
customers or service providers."
|
|
::= { zhoneTraps 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.9
|
|
zhoneTrapText OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..80))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Any text associated with this trap. NULL is allowed"
|
|
::= { zhoneTraps 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.10
|
|
zhoneTrapPortType OBJECT-TYPE
|
|
SYNTAX IANAifType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the If Type. It is used to uniquely identify a port."
|
|
::= { zhoneTraps 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.11
|
|
zhoneTrapPortTypeExtension OBJECT-TYPE
|
|
SYNTAX ZhoneIfType
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the If Type Extension. It is used to uniquely identify a port."
|
|
::= { zhoneTraps 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.12
|
|
zhoneTrapAlarmAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
set(1),
|
|
clear(2),
|
|
informational(3)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the alarm action type for products supporting the
|
|
alarm manager functionality."
|
|
::= { zhoneTraps 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.13
|
|
zhoneTrapAlarmId OBJECT-TYPE
|
|
SYNTAX ZhoneAlarmTypeId
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For products supporting the alarm manager functionality,
|
|
this is the alarm id a particular trap is setting or
|
|
clearing."
|
|
::= { zhoneTraps 13 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.14
|
|
zhoneTrapAlarmSeverity OBJECT-TYPE
|
|
SYNTAX ZhoneAlarmSeverity
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For products supporting the alarm manager functionality,
|
|
this is the alarm severity a particular trap is setting
|
|
or clearing."
|
|
::= { zhoneTraps 14 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.15
|
|
zhoneTrapConfigSyncResetInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ConfigSync reset check is run in 6 minute intervals.
|
|
This object represents the interval number and starts
|
|
with interval number 1 at system bootup and will reset
|
|
to 1 whenever the sytem reboots."
|
|
::= { zhoneTraps 15 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.16
|
|
zhoneTrapConfigSyncResetCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This count is the number of times the device has had to
|
|
reset ConfigSync. Resetting configsync on the device
|
|
consists of closing the FTP data and control sockets,
|
|
setting the configsyncstatus to syncerror, cleaning up
|
|
any pending configsync records, resetting the
|
|
ConfigSync state machine to the initial state, and
|
|
throwing a ConfigSyncReset Trap."
|
|
::= { zhoneTraps 16 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.17
|
|
zhoneTrapConfigSyncResetLastFtpTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Last time device sent a ConfigSync Ftp command to ZMS.
|
|
Measured using the Unix time() function.
|
|
The internal representation of time is the number of
|
|
seconds elapsed since 00:00 Universal time on
|
|
January 1, 1970 in the Gregorian calendar
|
|
(Julian day 2440587.5), with time stored as a 32 bit
|
|
signed integer (long in the original C implementation)."
|
|
::= { zhoneTraps 17 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.18
|
|
zhoneTrapConfigSyncResetCurrentTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Current device time returned using Unix time() function.
|
|
The internal representation of time is the number of
|
|
seconds elapsed since 00:00 Universal time on
|
|
January 1, 1970 in the Gregorian calendar
|
|
(Julian day 2440587.5), with time stored as a 32 bit
|
|
signed integer (long in the original C implementation)."
|
|
::= { zhoneTraps 18 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.2.19
|
|
zhoneTrapUtcTime OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "seconds"
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds since Jan. 1, 1970 GMT, when this trap
|
|
was sent from the device."
|
|
::= { zhoneTraps 19 }
|
|
|
|
|
|
-- The Configuration Synchronization related information is provided
|
|
-- to allow the device to synchronize non-SNMP changes with the
|
|
-- Zhone Management System.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.3
|
|
zhoneConfigSync OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration Synchronization information."
|
|
::= { zhoneSystem 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.3.1
|
|
zhoneConfigSyncExists OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not there exists records to be
|
|
sent to the ZMS config synch manager for changes
|
|
that have been made by CLI/HTTP to the data base."
|
|
::= { zhoneConfigSync 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.3.2
|
|
zhoneConfigSyncOverflow OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not the device had to discard
|
|
update data base records due to resource constraints.
|
|
If TRUE, traps will be sent to the ZMS Config Synch
|
|
Manager indicating a download of the entire data
|
|
base is required."
|
|
::= { zhoneConfigSync 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.3.3
|
|
zhoneConfigSyncPriority OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(1),
|
|
low(2),
|
|
medium(3),
|
|
high(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the highest priority configuration synchronization trap
|
|
outstanding. This flag is set to none at boot time and whenever a file
|
|
of synchronization changes has been sent to ZMS. If a parameter change
|
|
has been made to either the same or lower prioirty, the device does
|
|
not have to send a change notification to ZMS. Higher priority
|
|
fields must immediately cause traps to be sent to ZMS."
|
|
::= { zhoneConfigSync 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.3.4
|
|
zhoneConfigSyncAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAction(1),
|
|
createList(2),
|
|
createFullList(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used by ZMS when it wants to create a list
|
|
of config synch records. It must first write the
|
|
filename expected and then set the action. The
|
|
create_list action allows the device to determine
|
|
whether the complete database (synchoverflow
|
|
occured) needs to be sent or only those records
|
|
that have been modified. create_full_list
|
|
specifies that ZMS would like to receive the
|
|
complete database."
|
|
::= { zhoneConfigSync 4 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.3.5
|
|
zhoneConfigSyncFileName OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"File Name to be used when creating the config
|
|
synch records."
|
|
::= { zhoneConfigSync 5 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.3.6
|
|
zhoneConfigSyncStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
syncComplete(1),
|
|
syncPending(2),
|
|
syncError(3),
|
|
syncInitializing(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used by Config Sync Acgent when processing a request
|
|
to create a list of config synch records."
|
|
::= { zhoneConfigSync 6 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.3.7
|
|
zhoneConfigSyncUserName OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User Name to be used when sending the config
|
|
synch records.
|
|
|
|
When read, the last user name is returned. "
|
|
::= { zhoneConfigSync 7 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.3.8
|
|
zhoneConfigSyncUserPassword OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Password to be used when sending the config
|
|
synch records. For use in FTP authentication.
|
|
|
|
When read, always returns the NULL string"
|
|
::= { zhoneConfigSync 8 }
|
|
|
|
|
|
-- The parameters listed below are associated with the administration
|
|
-- and security of this device from a CLI, SNMP, and HTTP reference.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.4
|
|
zhoneAdmin OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone Authorization parameters."
|
|
::= { zhoneSystem 4 }
|
|
|
|
|
|
-- The Community Table determines access to the device. Incoming
|
|
-- SNMP requests are first validated for their community name and
|
|
-- their access right determined. An optional additional level
|
|
-- of security is provided by allowing specification of only certain
|
|
-- IP addresses. This can be specified on a per community name
|
|
-- basis. This function is provided by the use of an access list
|
|
-- (i.e. IP address list) table whose entries can be used by
|
|
-- multiple community name tables.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.4.1
|
|
zhoneAdminCommunityTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAdminCommunityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone proprietary Community Table."
|
|
::= { zhoneAdmin 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.1.1
|
|
zhoneAdminCommunityEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAdminCommunityEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A community name access to this system."
|
|
INDEX { IMPLIED zhoneAdminCommunityName }
|
|
::= { zhoneAdminCommunityTable 1 }
|
|
|
|
|
|
ZhoneAdminCommunityEntry ::=
|
|
SEQUENCE {
|
|
zhoneAdminCommunityName
|
|
ZhoneAdminString,
|
|
zhoneAdminCommunityAccess
|
|
INTEGER,
|
|
zhoneAdminCommunityAccessListIndex
|
|
Integer32,
|
|
zhoneAdminCommunityRowStatus
|
|
ZhoneRowStatus
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.4.1.1.1
|
|
zhoneAdminCommunityName OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString (SIZE (1..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The community name that has access to this system.
|
|
|
|
Maximum length for community name string is 32 characters."
|
|
::= { zhoneAdminCommunityEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.4.1.1.2
|
|
zhoneAdminCommunityAccess OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noAccess(1),
|
|
read(2),
|
|
readAndWrite(3),
|
|
admin(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Access Rights for this particular community name. An access of read-write-admin
|
|
allows access to those tables with a higher level of security such as the
|
|
community table. Gets to this table will return E_NOSUCHINSTANCE unless
|
|
the accessrights is read-write-admin.
|
|
|
|
noAccess - this community name does not have any access to this device.
|
|
read - allows read access to all fields except admin access fields such
|
|
as this community table.
|
|
readAndWrite - allow read and write access to all fields except admin access
|
|
fields such as this community table.
|
|
admin - read and write access to all fields on this device."
|
|
DEFVAL { read }
|
|
::= { zhoneAdminCommunityEntry 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.4.1.1.3
|
|
zhoneAdminCommunityAccessListIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..50)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The AccessList Table index indicating which IP addresses are
|
|
allowed to use this community name. If the value is
|
|
0, no address checking is performed and all SNMP requests are
|
|
allowed with the access right as specified in this table."
|
|
DEFVAL { '0'b }
|
|
::= { zhoneAdminCommunityEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.1.1.4
|
|
zhoneAdminCommunityRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status in order to create the entry for this
|
|
destination."
|
|
::= { zhoneAdminCommunityEntry 4 }
|
|
|
|
|
|
-- The access list table is a proprietary table defined by
|
|
-- Zhone for the use of defining which IP addresses are
|
|
-- allowed to send SNMP requests. The community name
|
|
-- table references, if applicable, an access list index
|
|
-- which along with any defined IP address indexes define
|
|
-- the total list of acceptable IP addresses. See the community
|
|
-- name table for further description.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.4.2
|
|
zhoneNextAdminAccessIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..50)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The next available zhoneAdminAccessListIndex that can
|
|
be used by the manager when creating a access list
|
|
entry. A Get request to this field causes the current
|
|
number to be returned and the value to be incremented
|
|
for the next requester.
|
|
|
|
Once this value reaches 50, processing examines the
|
|
entire list for possible free entries and provides the
|
|
lowest number available. If no entries are free, an
|
|
error is returned.
|
|
"
|
|
::= { zhoneAdmin 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.3
|
|
zhoneAdminAccessListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneAdminAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access List Table Definition."
|
|
::= { zhoneAdmin 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.3.1
|
|
zhoneAdminAccessListEntry OBJECT-TYPE
|
|
SYNTAX ZhoneAdminAccessListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone Access List Entry Definition."
|
|
INDEX { zhoneAdminAccessListIndex, zhoneAdminAccessListIpAddress }
|
|
::= { zhoneAdminAccessListTable 1 }
|
|
|
|
|
|
ZhoneAdminAccessListEntry ::=
|
|
SEQUENCE {
|
|
zhoneAdminAccessListIndex
|
|
Integer32,
|
|
zhoneAdminAccessListIpAddress
|
|
IpAddress,
|
|
zhoneAdminAccessRowStatus
|
|
ZhoneRowStatus
|
|
}
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.4.3.1.1
|
|
zhoneAdminAccessListIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..50)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index into this table. There is a maximum support of
|
|
a total of 50 access lists. 0 is not supported as it
|
|
indicates that no IP address validation should be
|
|
performed."
|
|
::= { zhoneAdminAccessListEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.4.3.1.2
|
|
zhoneAdminAccessListIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address is used as a index into this table and
|
|
indicates whether SNMP requests originating from this
|
|
address will be accepted."
|
|
::= { zhoneAdminAccessListEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.3.1.3
|
|
zhoneAdminAccessRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status in order to create the entry for this
|
|
destination."
|
|
::= { zhoneAdminAccessListEntry 3 }
|
|
|
|
|
|
-- The parameters listed below are associated with the user administration
|
|
-- on this device whether the access is via ZLI or telnet.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4
|
|
zhoneUser OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone User parameters."
|
|
::= { zhoneAdmin 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.1
|
|
zhoneUserIdNext OBJECT-TYPE
|
|
SYNTAX Integer32 (1..20)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The next available zhoneUserId that can
|
|
be used by the manager when creating a user
|
|
entry. A Get request to this field causes the current
|
|
number to be returned and the value to be incremented
|
|
to the next available ID for the next requester use.
|
|
|
|
A maximum of 20 login accounts are allowed per system."
|
|
::= { zhoneUser 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.2
|
|
zhoneUserTotalFailedLogins OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of failed logins performed by any user whether
|
|
this be for invalid user id or valid user id but an invalid
|
|
password."
|
|
::= { zhoneUser 2 }
|
|
|
|
|
|
-- The following table defines the users allowed to login on the zli.
|
|
-- In addition to the user name and password, an access level for this user
|
|
-- and the prompt to be used is specified. Any access to this table requires
|
|
-- admin access level via either the community name or zli.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3
|
|
zhoneUserTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ZLI user information."
|
|
::= { zhoneUser 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3.1
|
|
zhoneUserEntry OBJECT-TYPE
|
|
SYNTAX ZhoneUserEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row exists for each user that can login on this system."
|
|
INDEX { zhoneUserId }
|
|
::= { zhoneUserTable 1 }
|
|
|
|
|
|
ZhoneUserEntry ::=
|
|
SEQUENCE {
|
|
zhoneUserId
|
|
Integer32,
|
|
zhoneUserName
|
|
ZhoneAdminString,
|
|
zhoneUserPassword
|
|
ZhoneAdminString,
|
|
zhoneUserPrompt
|
|
ZhoneAdminString,
|
|
zhoneUserAccessLevel
|
|
BITS,
|
|
zhoneUserAdmin
|
|
INTEGER,
|
|
zhoneUserLogins
|
|
Counter32,
|
|
zhoneUserFailedLogins
|
|
Counter32,
|
|
zhoneUserRowStatus
|
|
ZhoneRowStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3.1.1
|
|
zhoneUserId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..20)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The id used to identify this particular user. This value
|
|
is only used for access to this table and is not externally
|
|
shown."
|
|
::= { zhoneUserEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3.1.2
|
|
zhoneUserName OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The user name allowed to login to this system."
|
|
::= { zhoneUserEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3.1.3
|
|
zhoneUserPassword OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The password to be used for logging in to the system.
|
|
|
|
This field is returned as an encrypted field."
|
|
::= { zhoneUserEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3.1.4
|
|
zhoneUserPrompt OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The prompt to be used after this user has logged in to
|
|
the system."
|
|
DEFVAL { "zSH> " }
|
|
::= { zhoneUserEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3.1.5
|
|
zhoneUserAccessLevel OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
userAccessAdmin(0),
|
|
userAccessVoice(1),
|
|
userAccessData(2),
|
|
userAccessManuf(3),
|
|
userAccessDatabase(4),
|
|
userAccessSystems(5),
|
|
userAccessTool(6),
|
|
userAccessDebug(7)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Array of access levels that a user may have. This is an OR
|
|
field where a user may have access to different subsystems.
|
|
Only exception is Admin access level which allows access to
|
|
all functions in the system.
|
|
|
|
userAccessAdmin - allows access to all entities of the system.
|
|
|
|
userAccessVoice - allows access to voice specific configuration
|
|
and information.
|
|
|
|
userAccessData - allows access to the data (i.e. IP)
|
|
configuration and information.
|
|
|
|
userAccessManuf - allows access to the manufacturing components
|
|
of the system.
|
|
|
|
userAccessDatabase - allows access to the database allowing
|
|
write access. For any access except admin,
|
|
this value must be set to allow any changes
|
|
to be saved by this user.
|
|
|
|
userAccessSystems - allows access to the system information.
|
|
|
|
userAccessTool - allows access to system tools which help
|
|
administer the system.
|
|
|
|
userAccessDebug - allows access to Zhone Debug commands. This
|
|
access should rarely be specified.
|
|
|
|
There is No default value and a value must be specified for the
|
|
user entry to be created.
|
|
|
|
"
|
|
::= { zhoneUserEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3.1.6
|
|
zhoneUserAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether this user is enabled (i.e. can login). Disabling
|
|
the user will automatically cause an internal logout if the
|
|
user is currently logged in."
|
|
DEFVAL { enabled }
|
|
::= { zhoneUserEntry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3.1.7
|
|
zhoneUserLogins OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of successful logins performed by this user."
|
|
::= { zhoneUserEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3.1.8
|
|
zhoneUserFailedLogins OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of failed logins performed by this user.
|
|
|
|
A user would have had entered a this user name but entered
|
|
an invalid password. Invalid user names are not tracked but
|
|
are included in the total count described above."
|
|
::= { zhoneUserEntry 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.4.4.3.1.9
|
|
zhoneUserRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status in order to create the entry for this
|
|
user.
|
|
|
|
In order to successfully create a user record, the following
|
|
variables are required:
|
|
|
|
zhoneUserName
|
|
zhoneUserPassword
|
|
zhoneUserAccessLevel
|
|
"
|
|
::= { zhoneUserEntry 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5
|
|
zhoneSystemConfiguration OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System configuration parameters"
|
|
::= { zhoneSystem 5 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.1
|
|
zhoneSystemConfigurationNumShelves OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "shelves"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of shelves physically in the system"
|
|
::= { zhoneSystemConfiguration 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.2
|
|
zhoneSystemConfigurationShelvesArray OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (32))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bit array from 0-255 (32 8-bit bytes) that are
|
|
present in the system."
|
|
::= { zhoneSystemConfiguration 2 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.3
|
|
zhoneSystemConfigurationNumCards OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of cards in the system (physcially).
|
|
The number per shelf is defined in the shelf mib."
|
|
::= { zhoneSystemConfiguration 3 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.4
|
|
zhoneSystemConfigurationIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of this device. Independent of the
|
|
different IP interfaces configured and what is active,a manager
|
|
uses this address as how to address the device. This address
|
|
may OR may not be an IP address of an existing IP
|
|
interface. Deletion of a matching IP interface does not
|
|
cause this address to be modified or deleted.
|
|
|
|
A manager may communicate with the device using any of the
|
|
configured IP interface addresses. However, any failures
|
|
such as physical line outages or the card status is inactive,
|
|
may result in failures to the manager requests (i.e. timeout).
|
|
|
|
This value is defaulted to 0."
|
|
::= { zhoneSystemConfiguration 4 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.5
|
|
zhoneSystemConfigurationAlternateIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A second IP address of this device. Independent of the
|
|
different IP interfaces configured and what is active,a manager
|
|
uses this address as how to address the device. This address
|
|
may OR may not be an IP address of an existing IP
|
|
interface. Deletion of a matching IP interface does not
|
|
cause this address to be modified or deleted.
|
|
|
|
A manager may communicate with the device using any of the
|
|
configured IP interface addresses. However, any failures
|
|
such as physical line outages or the card status is inactive,
|
|
may result in failures to the manager requests (i.e. timeout).
|
|
|
|
This value is defaulted to 0 and in some cases, may never
|
|
be configured."
|
|
::= { zhoneSystemConfiguration 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.6
|
|
zhoneSystemConfigurationDateAndTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time of the system, specified in local time.
|
|
|
|
Only a community name having 'admin' priviledges will be
|
|
allowed to modify this value. Although any valid community
|
|
name is allowed to read it.
|
|
|
|
If an NTP server has been configured in zhoneSntpConfiguration,
|
|
then manual setting of the date and time is not allowed, and
|
|
a set attempt on zhoneSystemConfigurationDateAndTime will
|
|
result in a generic error."
|
|
::= { zhoneSystemConfiguration 6 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.7
|
|
zhoneSystemConfigurationCountryRegion OBJECT-TYPE
|
|
SYNTAX ZhoneCountryCode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The country or region where this system is operating in. This
|
|
variable is used to adjust system settings for different
|
|
functional modules. For example, both DSP tones and TDM
|
|
compounding are country-specific settings that can be
|
|
determined by this variable.
|
|
|
|
This value is defaulted to 'us'."
|
|
DEFVAL { us }
|
|
::= { zhoneSystemConfiguration 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.8
|
|
zhonePrimaryClockSource OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifIndex of the interface from which clock can be derived.
|
|
Only oc3, ds1, and ds3 interfaces can be used for this.
|
|
|
|
This interface will be used to drive the 8khz backplane
|
|
signal.
|
|
|
|
The interface must be set to loop or local timing in order for
|
|
it to be considered as the primary clock source. It must
|
|
also be administratively turned on and be in an operational state.
|
|
|
|
Only one interface in the system can be the primary clock source
|
|
at any given time.
|
|
|
|
|
|
NOTE: This value has been deprecated and should not be used. If
|
|
specified, the system will use this interface as the clock source
|
|
and will ignore the provisioning specified in the
|
|
zhoneSystemClockTable."
|
|
DEFVAL { 0 }
|
|
::= { zhoneSystemConfiguration 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.9
|
|
zhoneSystemConfigurationRingSource OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
internalRingSourceLabel(1),
|
|
externalRingSourceLabel(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ring voltage source selection (internal or external):
|
|
(1)Select internal ring generator (located within TAC)
|
|
as source for ring voltage to line cards.
|
|
(2) Select external ring generator (input connector
|
|
located on TAC) as source for ring voltage to line cards.
|
|
"
|
|
DEFVAL { internalRingSourceLabel }
|
|
::= { zhoneSystemConfiguration 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.10
|
|
zhoneSystemCurrentClockSource OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current interface that is being used for the clock source.
|
|
|
|
A value of 0 is returned if there are no available interfaces
|
|
in the zhoneSystemClockTable that have a
|
|
zhoneSystemClockAvailibilityStatus of active even the system
|
|
clock table is not empty."
|
|
::= { zhoneSystemConfiguration 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.11
|
|
zhoneSystemSecondaryClockSource OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface that would next be used for the system clock source
|
|
if the zhoneSystemCurrentClockSource becomes inactive,
|
|
it's elgibility is changed,is being used for the clock source.
|
|
|
|
A value of 0 is returned if there are no other available interfaces
|
|
in the zhoneSystemClockTable that have a
|
|
zhoneSystemAvailabilityStatus of active even the system clock table
|
|
is not empty.
|
|
"
|
|
::= { zhoneSystemConfiguration 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.12
|
|
zhoneSystemClockTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneSystemClockEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of physical ports that could be used as the clock
|
|
source for other physical ports (i.e. DSL, DS1/DS3, and sonet).
|
|
|
|
Entries are added to this table automatically by the system
|
|
software whenever a card is activated for the first time.
|
|
Ports that can supply clock will be added to this table
|
|
with the default eligibility being set to FALSE (i.e not
|
|
eligible to be a clock source). Current port types that will
|
|
be added to this table are: DS1/E1, DS3/E3, and Sonet). Note
|
|
that only physical ports are added so for example, a DS3
|
|
would be added but not any of the associated DS1 interfaces.
|
|
|
|
A manager provisions entries in this table to be eligible
|
|
to be a clock source and the associated weight that is
|
|
provisioned is used to determine the preference order
|
|
for the clock source.
|
|
|
|
A manager which specifies the DEPRECATED zhonePrimaryClockSource
|
|
overrides entries in this table and will be used as the
|
|
system clock source as long as the interface is active."
|
|
::= { zhoneSystemConfiguration 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.12.1
|
|
zhoneSystemClockEntry OBJECT-TYPE
|
|
SYNTAX ZhoneSystemClockEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the system clock table. Each row represents a
|
|
possible clock source by it's associated ifIndex."
|
|
INDEX { ifIndex }
|
|
::= { zhoneSystemClockTable 1 }
|
|
|
|
|
|
ZhoneSystemClockEntry ::=
|
|
SEQUENCE {
|
|
zhoneSystemClockEligibility
|
|
TruthValue,
|
|
zhoneSystemClockWeight
|
|
Integer32,
|
|
zhoneSystemClockAvailabilityStatus
|
|
INTEGER,
|
|
zhoneSystemClockTxClockMode
|
|
INTEGER
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.12.1.1
|
|
zhoneSystemClockEligibility OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The eligibility field indicates whether the system should
|
|
include this physical port as a possible clock source."
|
|
DEFVAL { false }
|
|
::= { zhoneSystemClockEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.12.1.2
|
|
zhoneSystemClockWeight OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The weight to be used to indicate the preference for
|
|
each eligible port which is currently active
|
|
(zhoneSystemClockElgibilityStatus = active) to be used as
|
|
the system clock source.
|
|
|
|
Multiple interfaces may have the same weight and if so, the system
|
|
will choose which interface to be chosen as the clock source.
|
|
|
|
Changing the weight will have an immediate affect. For example,
|
|
changing an interface to the highest priority will immediately
|
|
make the interface the zhoneSystemCurrentClockSource unless
|
|
the weight of the current source has that same weight."
|
|
DEFVAL { 5 }
|
|
::= { zhoneSystemClockEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.12.1.3
|
|
zhoneSystemClockAvailabilityStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status for whether this port can be usd as a clock source.
|
|
|
|
A port can be active only on all of the following conditions
|
|
are true:
|
|
|
|
1. zhoneSystemClockEligibility is true.
|
|
2. the interface is up and running (both ifAdminStatus and
|
|
ifOperStatus are up).
|
|
|
|
When this value is 'active', this port is included in a pool
|
|
ordered by weights for whether it should be the clock source."
|
|
::= { zhoneSystemClockEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.12.1.4
|
|
zhoneSystemClockTxClockMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
other(1),
|
|
provisionedTiming(2),
|
|
localTiming(3),
|
|
loopTiming(4),
|
|
throughTiming(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmit clock source is provisioned in the profile
|
|
corresponding to the line type. The choices are loop,
|
|
local, or through. zhoneSystemClockTxClockMode shows
|
|
the current transmit clock source as possibly modified
|
|
by the clock manager. If the line selected as system
|
|
clock source is provisioned in through mode, its
|
|
zhoneSystemClockTxClockMode value is set to loopTiming
|
|
while it is the source. If there is no eligible clock
|
|
source, zhoneSystemClockTxClockMode for all lines are
|
|
set to localTiming.
|
|
|
|
provisionedTiming is reserved for internal use and will
|
|
never be seen as the status of transmit clock mode.
|
|
|
|
localTiming indicates that a local clock source is used
|
|
or that an external clock is attached to the box
|
|
containing the interface.
|
|
|
|
loopTiming indicates that the recovered receive clock
|
|
is used as the transmit clock.
|
|
|
|
throughTiming indicates that transmit clock is derived
|
|
from the recovered receive clock of another interface."
|
|
::= { zhoneSystemClockEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.13
|
|
zhoneSystemConsoleLogging OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An option to enable or disable logging of system messages onto the console."
|
|
DEFVAL { enabled }
|
|
::= { zhoneSystemConfiguration 13 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.14
|
|
zhoneSystemRevertiveClockSource OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether revertive behavior of the system clock is desired.
|
|
If set to TRUE, the system will automatically revert to the higher
|
|
weighted clock when it becomes available again. Used by systems that
|
|
have the Clock Manager enabled."
|
|
DEFVAL { true }
|
|
::= { zhoneSystemConfiguration 14 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.15
|
|
zhoneSystemVoiceBandwidthCheck OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Turns ON (true) of OFF (false) ATM bandwidth checks
|
|
for new voice calls going through the system. The
|
|
bandwidth check is based on the configuration of
|
|
the Rx and Tx traffic descriptors used for the ATM
|
|
VC/CID that the call is going across. If rtVBR is
|
|
being used then the SCR is used for the bandwidth
|
|
calculation cell rate. If CBR is being used then
|
|
the PCR is used for the bandwidth calculation cell
|
|
rate. For any other service category, a call is
|
|
always allowed and the voice quality is not
|
|
guaranteed. The bandwidth calculation looks like
|
|
this (assume approx 180 AAL2 cells used for a
|
|
voice stream):
|
|
|
|
if ((rxCellRate - (180 * numActiveCallsOn VC)) < 180)
|
|
{
|
|
/* reject call */
|
|
}
|
|
else if ((txCellRate - (180 * numActiveCallsOnVC)) < 180)
|
|
{
|
|
/* reject call */
|
|
}
|
|
else
|
|
{
|
|
/* proceed with call */
|
|
}
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneSystemConfiguration 15 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.16
|
|
zhoneAlarmLevelsEnabled OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
critical(0),
|
|
major(1),
|
|
minor(2),
|
|
warning(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bit field indicating which combination of the 4 alarm
|
|
levels are enabled. User can disable alarms based
|
|
on alarm severity level."
|
|
::= { zhoneSystemConfiguration 16 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.17
|
|
zhoneSystemUserAuthMethod OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
local(1),
|
|
radius(2),
|
|
radiusThenLocal(3),
|
|
radiusThenCraft(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object determines how users access to the device is authenticated.
|
|
A value of local indicates that user should be authenticated using
|
|
locally provisioned user-profile profiles. A value of radius
|
|
indicates that only RADIUS authentication should be used. A value
|
|
of radiusThenLocal indicates that the user should be authenticated
|
|
first by using RADIUS authentication and if that fails, then by local
|
|
user-profile profiles. A value of radiusThenCraft indicates that the
|
|
user should be authenticated first by using RADIUS authentication and
|
|
if that fails, then only on the local craft port authentication by local
|
|
user-profile profiles is allowed but all other ports will be denied
|
|
access."
|
|
DEFVAL { local }
|
|
::= { zhoneSystemConfiguration 17 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.18
|
|
zhoneSystemRadiusAuthIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains the index of the Radius Server profile to
|
|
be used if RADIUS authentication is desired."
|
|
::= { zhoneSystemConfiguration 18 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.19
|
|
zhoneSystemSecureFTP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secure FTP (SFTP) control."
|
|
DEFVAL { disabled }
|
|
::= { zhoneSystemConfiguration 19 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.20
|
|
zhoneSystemWebInterface OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the Web GUI Interface is enabled for this system."
|
|
DEFVAL { enabled }
|
|
::= { zhoneSystemConfiguration 20 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.21
|
|
zhoneSystemConfigurationOptions OBJECT-TYPE
|
|
SYNTAX BITS
|
|
{
|
|
cvlanonly(0),
|
|
nol3bridgetable(1),
|
|
ipg88bits(2),
|
|
disdefpktrules(3),
|
|
enablexcardlinkagg(4),
|
|
fiberlan(5),
|
|
cfmon(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System options in bit-mask format."
|
|
::= { zhoneSystemConfiguration 21 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.22
|
|
zhoneSystemConfigurationReservedVlanIdStart OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4090)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Starting VLAN ID of the reserved VLAN ID block.
|
|
|
|
The reserved VLAN ID block starts with the reservedVlanIdStart and
|
|
ends with reservedVlanIdStart + reservedVlanIdCount;
|
|
|
|
No bridge, host, or IP can use a VLAN ID in the reserved VLANs."
|
|
DEFVAL { 0 }
|
|
::= { zhoneSystemConfiguration 22 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.23
|
|
zhoneSystemConfigurationReservedVlanIdCount OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2048)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of reserved VLAN IDs in the reserved VLAN ID block.
|
|
|
|
A zero value disables these reserved VLANs and operation
|
|
reverts to normal VLAN ID reservation.
|
|
|
|
The reserved VLAN ID block starts with the reservedVlanIdStart and
|
|
ends with reservedVlanIdStart + reservedVlanIdCount;
|
|
|
|
No bridge, host, or IP can use a VLAN ID in the reserved VLANs.
|
|
|
|
For GPON OLTs, the number of GEM Ports per OLT cannot exceed
|
|
this number."
|
|
DEFVAL { 0 }
|
|
::= { zhoneSystemConfiguration 23 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.24
|
|
zhoneSystemSnmpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
snmpv2(1),
|
|
snmpv3(2),
|
|
snmpv3includingZMS(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Version of SNMP the supported by the device."
|
|
::= { zhoneSystemConfiguration 24 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.5.25
|
|
zhoneSystemPersistentLogging OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An option to enable or disable persistent logging of system messages onto the console."
|
|
DEFVAL { disabled }
|
|
::= { zhoneSystemConfiguration 25 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.26
|
|
zhoneSystemOutletTemperatureHighThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (35..75)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the outlet sensor high temperature threshold.
|
|
Minor, Major & Critical alarms will be raised when
|
|
outlet sensor temperature reaches X, X+5 & X+10
|
|
respectively. X is the value of this field.
|
|
Allowed range for MXK & MX1U products is 35 to 65
|
|
Allowed range for MX1U160Lt is 35 to 75"
|
|
DEFVAL { 65 }
|
|
::= { zhoneSystemConfiguration 26 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.5.27
|
|
zhoneSystemOutletTemperatureLowThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (-40..0)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the outlet sensor low temperature threshold.
|
|
Minor alarm will be raised when outlet sensor reaches
|
|
the temperatue configured in this field"
|
|
DEFVAL { -12 }
|
|
::= { zhoneSystemConfiguration 27 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.6
|
|
zhoneSoftwareLoadTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneSoftwareLoadEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used by the system to determine the
|
|
default code image to load for each card type.
|
|
|
|
Each card, when it requests a software load, will either
|
|
receive an upgrade version of software, a specific
|
|
version of software, or receive the known current
|
|
version of the software. This table is used to
|
|
determine the code image to load in the default case.
|
|
|
|
This table is not used for non-BAN hardware."
|
|
::= { zhoneSystem 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.6.1
|
|
zhoneSoftwareLoadEntry OBJECT-TYPE
|
|
SYNTAX ZhoneSoftwareLoadEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of software code image names for each card type
|
|
in a BAN."
|
|
INDEX { zhoneSwCardType }
|
|
::= { zhoneSoftwareLoadTable 1 }
|
|
|
|
|
|
ZhoneSoftwareLoadEntry ::=
|
|
SEQUENCE {
|
|
zhoneSwCardType
|
|
ZhoneCardType,
|
|
zhoneSwCardSwFileName
|
|
ZhoneFileName,
|
|
zhoneSwLoadRowStatus
|
|
ZhoneRowStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.6.1.1
|
|
zhoneSwCardType OBJECT-TYPE
|
|
SYNTAX ZhoneCardType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of card requesting software load this card type
|
|
the same used in the Card Resources MIB.
|
|
"
|
|
::= { zhoneSoftwareLoadEntry 1 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.6.1.2
|
|
zhoneSwCardSwFileName OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of code image to loaded by software load
|
|
services for the card type requesting a load
|
|
if a specific load version is not requested.
|
|
|
|
Required for RowCreate"
|
|
::= { zhoneSoftwareLoadEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.6.1.3
|
|
zhoneSwLoadRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row status in order to create the entry for this
|
|
destination.
|
|
|
|
zhoneCardSwFileName is required for row creation."
|
|
::= { zhoneSoftwareLoadEntry 3 }
|
|
|
|
|
|
-- The device will store an error string, along with
|
|
-- the current request_id and IP source address along
|
|
-- with the current time to be stored in a new row in
|
|
-- this error mib. This mib can then be accessed (via
|
|
-- an INDEX of ip address, request_id) with a 'get'
|
|
-- operation by the cli or zms to get the appropriate
|
|
-- error code. Once the value is 'gotten', the row is
|
|
-- destroyed. The time stamp is maintained so that old
|
|
-- rows are removed after 2 minutes so as not to tie
|
|
-- up any unnecessary resources. This is used to
|
|
-- extend the limited SNMP error codes and fully define
|
|
-- to the user what error occured.
|
|
--
|
|
-- Note that there may be more than one entry in this
|
|
-- table with the same reqid and IP address as a
|
|
-- single SNMP PDU may have multiple errors.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.7
|
|
zhoneSnmpErrorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneSnmpErrorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone SNMP error information."
|
|
::= { zhoneSystem 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.7.1
|
|
zhoneSnmpErrorEntry OBJECT-TYPE
|
|
SYNTAX ZhoneSnmpErrorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single entry in the error table which describes an
|
|
problem detected by the mib handler."
|
|
INDEX { zhoneSnmpErrorIpAddress, zhoneSnmpErrorReqId }
|
|
::= { zhoneSnmpErrorTable 1 }
|
|
|
|
|
|
ZhoneSnmpErrorEntry ::=
|
|
SEQUENCE {
|
|
zhoneSnmpErrorIpAddress
|
|
IpAddress,
|
|
zhoneSnmpErrorReqId
|
|
Unsigned32,
|
|
zhoneSnmpErrorDisplayString
|
|
OCTET STRING,
|
|
zhoneSnmpErrorTime
|
|
TimeTicks
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.7.1.1
|
|
zhoneSnmpErrorIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the requesting station for which this
|
|
error is applicable."
|
|
::= { zhoneSnmpErrorEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.7.1.2
|
|
zhoneSnmpErrorReqId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"SNMP request ID of failed error. "
|
|
::= { zhoneSnmpErrorEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.7.1.3
|
|
zhoneSnmpErrorDisplayString OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..120))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual text string to show to the user."
|
|
::= { zhoneSnmpErrorEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.7.1.4
|
|
zhoneSnmpErrorTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System time that the error occurred. This is used so
|
|
the system will remove any old entries (older
|
|
than 2 minutes) as it is unlikely that the cli or
|
|
management station will require errors after that
|
|
long of a period."
|
|
::= { zhoneSnmpErrorEntry 4 }
|
|
|
|
|
|
-- Contains information for the software downloads for
|
|
-- Zhone Management System. Access to this table is only allowed with
|
|
-- admin access community names from snmp or admin access allowed user
|
|
-- names.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.8
|
|
zhoneSoftwareDownload OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Software Download information utilized by all Zhone
|
|
devices in order to obtain software images on to
|
|
local storage.
|
|
|
|
In lower-end devices, the download itself may be
|
|
stored directly into a boot area which is automatically
|
|
used upon restart of the system.
|
|
|
|
The login/password information may be ignored if the device
|
|
only supports tftp. Sets to these fields will be accepted so
|
|
the request may continue."
|
|
::= { zhoneSystem 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.8.1
|
|
zhoneSysSwLogin OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The login to be used on the remote system when
|
|
downloading the image.
|
|
|
|
This value is maintained throughout (i.e. persisted) and
|
|
can be used for additional/future download requests.
|
|
|
|
This login is used for both zli 'update-image' commands and
|
|
snmp/zms requests using this mib.
|
|
|
|
The login is defaulted to NULL the first time the system is
|
|
booted and is maintained across sw download requests and
|
|
reboots. That is, the value is not cleared upon completion and
|
|
can be reused by the manager..
|
|
|
|
When read, the last value used is returned."
|
|
::= { zhoneSoftwareDownload 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.8.2
|
|
zhoneSysSwPassword OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The password to be used on the remote system when
|
|
downloading the image.
|
|
|
|
This value is maintained throughout (i.e. persisted) and
|
|
can be used for additional/future download requests.
|
|
|
|
This password is used for both zli 'update-image' commands and
|
|
snmp/zms requests using this mib.
|
|
|
|
The password is defaulted to NULL the first time the system is
|
|
booted and is maintained across sw download requests and
|
|
reboots. That is, the value is not cleared upon completion and
|
|
can be reused by the manager..
|
|
|
|
When read, a NULL value is always returned."
|
|
::= { zhoneSoftwareDownload 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.8.3
|
|
zhoneSysSwPriLoadServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the primary software load server.
|
|
If the value of the zhoneSysSwPriLoadServer is set to
|
|
0.0.0.0 then no primary load server is available.
|
|
|
|
If the system is unable to load the software file
|
|
from the Primary Load Server, the system should
|
|
attemmpt to load the software from the the Secondary
|
|
Load Server (zhoneSysSecLoadServer).
|
|
|
|
This value must be set on each download request."
|
|
::= { zhoneSoftwareDownload 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.8.4
|
|
zhoneSysSwSecLoadServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the secondary or back-up software
|
|
load server, if there is no secondary server this
|
|
should be set to 0.0.0.0"
|
|
::= { zhoneSoftwareDownload 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.8.5
|
|
zhoneSysSwRemoteFilePath OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path on the remote system for the image to be loaded."
|
|
::= { zhoneSoftwareDownload 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.8.6
|
|
zhoneSysSwLocalFilePath OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path on the system for the image to be stored."
|
|
::= { zhoneSoftwareDownload 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.8.7
|
|
zhoneSysSwAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
downLoadSw(1),
|
|
abortDownLoadSw(2),
|
|
delete(3),
|
|
imageFlashActive(4),
|
|
imageFlashStandby(5),
|
|
downLoadFile(6),
|
|
upLoadFile(7),
|
|
dumpFile(8),
|
|
dumpNetwork(9),
|
|
restore(10),
|
|
configScriptActivate(11),
|
|
configDatabaseActivate(12),
|
|
backupDatabase(13),
|
|
restoreDatabase(14)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" (1) downloadSw: Download the image from the Primary load
|
|
Server. If that fails, try to download from secondary
|
|
load server. This value is only allowed if the zhoneSysSwStatus
|
|
field is NOT downLoadSwInProgress.
|
|
|
|
(2) abortDownLoadSw: abort an in-progress download. This value
|
|
is only allowed if the zhoneSysSwStatus is downLoadSwInProgress.
|
|
|
|
(3) delete: deletes the filename specified in
|
|
zhoneSysSwLocalFilePath. This is used by the manager to
|
|
manage the amount of storage space used by the
|
|
system for sw load images. A delete will fail if
|
|
the file is specified in either a: default sw entry,
|
|
specific software entry, or an upgrade software entry.
|
|
|
|
This is only supported on devices having a file-system.
|
|
|
|
(4) imageFlashActive: flashes the raw file specified in the
|
|
zhoneSysSwLocalFilePath. This is used to update the raw
|
|
boot area of the flash of the active infoserver.
|
|
|
|
(5) imageFlashStandby: flashes the raw file specified in the
|
|
zhoneSysSwLocalFilePath. This is used to update the raw
|
|
boot area of the flash of the active infoserver.
|
|
|
|
(6) downLoadFile: Download a file from the Primary load
|
|
Server. If that fails, try to download from secondary
|
|
load server. This value is only allowed if the zhoneSysSwStatus
|
|
field is NOT operationInProgress.
|
|
|
|
(7) upLoadFile: Upload a file to the Primary load
|
|
Server. The file must already exists on the load server
|
|
This value is only allowed if the zhoneSysSwStatus
|
|
field is NOT operationInProgress.
|
|
|
|
(8) dumpFile: dump the database to a local file.
|
|
|
|
(9) dumpNetwork: dump the database to the primary load
|
|
server. The file must already exists on the load server
|
|
This value is only allowed if the zhoneSysSwStatus
|
|
field is NOT operationInProgress.
|
|
|
|
(10) restore
|
|
|
|
(11) configScriptActivate: activate the configuration
|
|
script file specified in the zhoneSysSwLocalFilePath.
|
|
This value is only allowed if the zhoneSysSwStatus is
|
|
NOT operationInProgress nor downloadSwInProgress.
|
|
|
|
(12) configDatabaseActivate: activate the contents of a
|
|
database file specified in the zhoneSysSwLocalFilePath.
|
|
This value is only allowed if the zhoneSysSwStatus is
|
|
NOT operationInProgress nor downloadSwInProgress.
|
|
Activation of a new database may result in a reset of
|
|
the system.
|
|
|
|
(13) backupDatabase: backup device by uploading database
|
|
file to zhoneSysSwLocalFilePath.
|
|
|
|
(14) restoreDatabase: restore device database from
|
|
zhoneSysSwLocalFilePath. This command will reboot device
|
|
with restored database.
|
|
"
|
|
::= { zhoneSoftwareDownload 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.8.8
|
|
zhoneSysSwStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
downLoadSwUnknown(1),
|
|
downLoadSwInProgress(2),
|
|
downLoadSwAborted(3),
|
|
downLoadSwFailed(4),
|
|
downLoadSwSuccessful(5),
|
|
deleteFileNotFound(6),
|
|
deleteFileInUse(7),
|
|
deleteSuccessful(8),
|
|
operationInProgress(9),
|
|
operationAborted(10),
|
|
operationFailed(11),
|
|
operationSuccessful(12)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
(1) downLoadSwUnknown: No state known. This is the value if
|
|
no sw download had been requested since the system was
|
|
initialized or a delete command is in progress.
|
|
|
|
(2) downloadSwInProgres: Download currently in progress.
|
|
|
|
(3) downLoadSwAborted: abort command processed. Sw not loaded.
|
|
|
|
(4) downLoadSwFailed: FTP/TFTP request failed to both the primary
|
|
and secondary server.
|
|
|
|
(5) downLoadSwSuccessful: SW successfully downloaded from
|
|
either the primary or secondary server.
|
|
|
|
(6) deleteFileNotFound: The file specified in
|
|
zhoneSysSwLocalFilePath cannot be found on the device.
|
|
|
|
(7) deleteFileInUse: The file specified in
|
|
zhoneSysSwLocalFilePath is currently specified in
|
|
a sw configuration record.
|
|
|
|
(8) deleteSuccessful: The file was successfully deleted.
|
|
|
|
The following are the generic status for the imageFlash,
|
|
uploadFile, downloadFile, dump and restore operations.
|
|
(9) operationInProgres: operation currently in progress.
|
|
|
|
(10) operationAborted: abort command processed. Sw not loaded.
|
|
|
|
(11) operationFailed: operation failed
|
|
|
|
(12) operationSuccessful: operation successfully
|
|
"
|
|
::= { zhoneSoftwareDownload 8 }
|
|
|
|
|
|
-- Contains information for the reboot of the system or cards of the system.
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.9
|
|
zhoneSoftwareReboot OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reboot for system or particular type of cards. Common use
|
|
is after software downloads but can be used anytime.
|
|
|
|
Initiating a reboot requires admin access level security."
|
|
::= { zhoneSystem 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.9.1
|
|
zhoneSysRebootAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
systemReboot(1),
|
|
rebootByCardType(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" systemReboot: reboot all the cards
|
|
|
|
rebootByCardType : reboot all cards of a particular card
|
|
Type (specified by zhoneSysRebootCardType).
|
|
"
|
|
::= { zhoneSoftwareReboot 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.9.2
|
|
zhoneSysRebootCardType OBJECT-TYPE
|
|
SYNTAX ZhoneCardType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The numerical representation of what unit/card type
|
|
has to be rebooted."
|
|
::= { zhoneSoftwareReboot 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.10
|
|
zhoneSysCardSoftwareConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneSysCardSoftwareConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software configuration for this card. For every
|
|
card (i.e. shelf/slot) in the system, an entry must
|
|
be created in order for the card to get loaded with
|
|
software along with the card software enable flag
|
|
set to true.
|
|
|
|
At a minimum, the system will check to see if the
|
|
zhoneSysCardSwEnable value is TRUE to indicate the
|
|
card can be loaded. If the value is true, the scenario
|
|
to determine which software to load is:
|
|
|
|
- if zhoneSysCardUpgradeFileName is set and
|
|
the zhoneSysSwUpgradeEnable flag is
|
|
set to true, load this software.
|
|
- if zhoneSysCardSpecificFileName is set, load
|
|
this software.
|
|
- if a default file name is specified for this
|
|
card type, the software specified in
|
|
zhoneSwCardFileName will be used.
|
|
|
|
- Otherwise, a trap is generated for the first
|
|
time this error occurs."
|
|
::= { zhoneSystem 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1
|
|
zhoneSysCardSoftwareConfigEntry OBJECT-TYPE
|
|
SYNTAX ZhoneSysCardSoftwareConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for a particular card. An entry is added by
|
|
the manager in order for a card to be available for
|
|
loading. If an entry does not exist for a card, no load
|
|
is possible."
|
|
INDEX { zhoneShelfIndex, zhoneSlotIndex }
|
|
::= { zhoneSysCardSoftwareConfigTable 1 }
|
|
|
|
|
|
ZhoneSysCardSoftwareConfigEntry ::=
|
|
SEQUENCE {
|
|
zhoneSysCardSpecificSwFileName
|
|
ZhoneFileName,
|
|
zhoneSysCardSwSpecificVers
|
|
ZhoneAdminString,
|
|
zhoneSysCardUpgradeSwFileName
|
|
ZhoneFileName,
|
|
zhoneSysCardSwUpgradeVers
|
|
ZhoneAdminString,
|
|
zhoneSysCardSwType
|
|
ZhoneCardType,
|
|
zhoneSysCardSwEnable
|
|
TruthValue,
|
|
zhoneSysCardSwUpgradeEnable
|
|
TruthValue,
|
|
zhoneSysCardRowStatus
|
|
ZhoneRowStatus,
|
|
zhoneSysCardLineType
|
|
ZhoneCardLineType,
|
|
zhoneSysCardAtmConfiguration
|
|
INTEGER,
|
|
zhoneSysCardLineVoltage
|
|
INTEGER,
|
|
zhoneSysCardVpiVciRange
|
|
INTEGER,
|
|
zhoneSysCardInitString
|
|
OCTET STRING,
|
|
zhoneSysCardWettingCurrent
|
|
INTEGER
|
|
}
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.1
|
|
zhoneSysCardSpecificSwFileName OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The file or code image name of the specific software
|
|
version that should be loaded by the unit/card for
|
|
operation. If a failure occurs when trying to boot
|
|
an upgrade version, the system will automatically
|
|
revert to a 'good' software version which is either
|
|
the zhoneSysCardSpecificSwFileName if non-NULL or the
|
|
default for this card type if it is NULL.
|
|
|
|
The operation will vary if the unit is a BAN card or
|
|
a standalone device.
|
|
|
|
BAN: In the case of a BAN the card will load the
|
|
indicated module and set cardSwStatus as appropriate.
|
|
If the cardSpecificFileName is set to NULL then the card
|
|
will load the image indicated by the
|
|
zhoneSoftwareLoadTable in the system mib.
|
|
|
|
STANDALONE: If the card is a Zedge,Sechtor, or similar
|
|
device, the system will first check if there is a local
|
|
copy of the code image indicated, if there is, the
|
|
card will load from the local copy. If the local copy
|
|
is not the same revision as zhoneSysCardSpecificSwFileName
|
|
the card will load this file. "
|
|
DEFVAL { " " }
|
|
::= { zhoneSysCardSoftwareConfigEntry 1 }
|
|
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.2
|
|
zhoneSysCardSwSpecificVers OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software version of the file name specified in
|
|
zhoneSysCardSpecificSwFileName.
|
|
|
|
If the revision is not known or the file name is
|
|
NULL, this should return an empty string."
|
|
::= { zhoneSysCardSoftwareConfigEntry 2 }
|
|
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.3
|
|
zhoneSysCardUpgradeSwFileName OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The file name of the software version that should be
|
|
loaded by the unit/card into the upgrade region of
|
|
the card/unit memory or storage.
|
|
|
|
This file takes precendence over the current sw file
|
|
name and is used to attempt to upgrade the software
|
|
on the system or card. If a user determines that the
|
|
software upgrade version is acceptable, this value
|
|
should be set in the CurrSwFileName.
|
|
"
|
|
DEFVAL { " " }
|
|
::= { zhoneSysCardSoftwareConfigEntry 3 }
|
|
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.4
|
|
zhoneSysCardSwUpgradeVers OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software version specified in the zhoneSysCardUpgrade
|
|
FileName variable in this table that will be loaded
|
|
on the next card reboot.
|
|
|
|
This object complies to the Zhone software revision
|
|
syntax."
|
|
::= { zhoneSysCardSoftwareConfigEntry 4 }
|
|
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.5
|
|
zhoneSysCardSwType OBJECT-TYPE
|
|
SYNTAX ZhoneCardType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The card type for the card in this shelf/slot.
|
|
|
|
When initially created, this value is defaulted to
|
|
'unknown'. When the card requests a load, the value in
|
|
this field is compared to the requesting card type. If
|
|
the value is 'unknown' and a load can be serviced
|
|
(i.e. the card is swenabled, and a sw is specified
|
|
in either the upgrade, specific, or default for this
|
|
type fields), the value is updated to the requesting
|
|
card type. Otherwise, the type in this field is
|
|
compared to the requesting card type. If it matches,
|
|
a load based on the other parameters is attempted.
|
|
Otherwise, the load request is rejected and the
|
|
initial request causes a trap to be generated.
|
|
|
|
This processing is provided to ensure a card is not
|
|
accidentally installed which attempts to load or
|
|
start provisioning for a non-matching card type.
|
|
|
|
The user may switch to a different card type than
|
|
currently executing by setting this value to the new
|
|
card type after the old card has been removed."
|
|
::= { zhoneSysCardSoftwareConfigEntry 5 }
|
|
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.6
|
|
zhoneSysCardSwEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether or not the card has been enabled to be loaded.
|
|
If this value is false, no sw will be loaded, otherwise
|
|
the logic flow defined in the table description
|
|
will be exercised for determining which software to load."
|
|
DEFVAL { false }
|
|
::= { zhoneSysCardSoftwareConfigEntry 6 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.7
|
|
zhoneSysCardSwUpgradeEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field indicates whether the zhoneSysCardUpgradeSwFileName
|
|
should be used as the software image when the card
|
|
requests a software load. This value can either be
|
|
set directly or may be set indirectly via changes to
|
|
the cardSwAdmin field in the card mib.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneSysCardSoftwareConfigEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.8
|
|
zhoneSysCardRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status used to create or delete an entry
|
|
for a card (i.e. shelf/slot). No entries are required
|
|
to be included in a table create as all entries have
|
|
default settings."
|
|
::= { zhoneSysCardSoftwareConfigEntry 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.9
|
|
zhoneSysCardLineType OBJECT-TYPE
|
|
SYNTAX ZhoneCardLineType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is used to identify which line types for
|
|
different cards
|
|
|
|
For normal e1/t1 cards only t1 and e1 (uni mode)
|
|
line types are supported.
|
|
|
|
For MALC t1Ima Uplink card, e1, t1, e1-ima, and
|
|
t1-ima line types are supported
|
|
|
|
For MALC ds3 Uplink card, e3 and t3 line types
|
|
are supported.
|
|
|
|
For MALC t1e1tdm Uplink card, only t1UniGr303,
|
|
t1ImaGr303, e1UniV52 and e1ImaV52 are supported.
|
|
MalcT1E1Tdm cards have 16 T1/E1 ports. The first
|
|
8 ports are ATM, the second 8 are TDM. These 4
|
|
values indicate both the layer 1 line type (e1Uni,
|
|
e1Ima, t1Uni, t1Ima) for the ATM ports and the
|
|
layer 3 signalling (gr303 and V5.2) for the TDM ports.
|
|
|
|
For malcXdsl48 with optional pots card, unknown,
|
|
adsl-pots and adsl-pots-pv are allowed.
|
|
|
|
For malcPots48 with unknown, pots and pots-pv are allowed.
|
|
|
|
|
|
All other cards only support unknown.
|
|
|
|
Default value for MALC t1Ima uplink will be
|
|
t1 line type if the line type was not stored
|
|
in the Real Time Clock (RTC). Otherwise it
|
|
will be the value stored in the RTC.
|
|
|
|
Default value for MALC ds3 Uplink will be
|
|
t3 line type if the line type was not stored
|
|
in the Real Time Clock (RTC). Otherwise it
|
|
will be the value stored in the RTC.
|
|
|
|
Default for MalcT1E1Tdm is t1UniGr303.
|
|
|
|
This field is only set upon row-creation.
|
|
Modifications to this value after row creation
|
|
will only be allowed for packet voice capable cards."
|
|
DEFVAL { unknown }
|
|
::= { zhoneSysCardSoftwareConfigEntry 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.10
|
|
zhoneSysCardAtmConfiguration OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
notApplicable(1),
|
|
cellRelayOnly(2),
|
|
cellRelayAndManagement(3),
|
|
dataTerm(4),
|
|
voiceGateway(5),
|
|
hybridLowAal5Data(6),
|
|
hybridDefault(7),
|
|
hybridHighAal5Data(8),
|
|
vbnrt95rt5(9),
|
|
vbnrt80rt15(10),
|
|
vbnrt65rt30(11),
|
|
vbnrt50rt45(12),
|
|
vbnrt35rt60(13),
|
|
vbnrt20rt75(14),
|
|
vbnrt5rt95(15),
|
|
vbnrt5rt95cbr(16),
|
|
manual(99)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field specifies how internal resources are distributed
|
|
between aal5 resources and aal2/cell relay resources based
|
|
on the core use of this card. This field is applicable for BAN
|
|
AtmTrnk, AtmAal25 and AtmTrnkCr Cards. For AtmAal25 card, it
|
|
also specifies how much of the AAL2/Cell Relay BW will be utilized
|
|
for RTVBR and UBR.
|
|
|
|
For AtmTrnkCr card valid value is cellRelayOnly. It implies
|
|
100% BW is available for cellRelay and none for AAL5. All
|
|
cell relay traffic is RTVBR.
|
|
|
|
For AtmTrnk card valid values are cellRelayOnly, cellRelayAndManagement,
|
|
dataTerm, hybridLowAal5Data, hybridDefault and hybridHighAal5Data.
|
|
All cell relay traffic is RTVBR and all AAL5 traffic is UBR.
|
|
Out of total available BW on AtmTrnk card:
|
|
for cellRelayOnly Cell Relay BW is 100% and AAL5 BW is 0%.
|
|
for cellRelayAndManagement Cell Relay BW is 95% and AAL5 BW is 5%.
|
|
for dataTerm Cell Relay BW is 5% and AAL5 BW is 95%.
|
|
for hybridLowAal5Data Cell Relay BW is 75% and AAL5 BW is 25%.
|
|
for hybridDefault Cell Relay BW is 60% and AAL5 BW is 40%.
|
|
for hybridHighAal5Data Cell Relay BW is 25% and AAL5 BW is 75%.
|
|
|
|
For AtmAal25 card valid values are cellRelayOnly, cellRelayAndManagement,
|
|
dataTerm, voiceGateway, hybridLowAal5Data, hybridDefault and
|
|
hybridHighAal5Data. All AAL5 traffic is UBR and AAL2/Cell Relay
|
|
traffic can be RTVBR or UBR.
|
|
Out of total available BW on AtmAal25 card:
|
|
for cellRelayOnly AAL2/Cell Relay BW is 100% and AAL5 BW is 0%.
|
|
50% of AAL2/Cell Relay BW is for RTVBR.
|
|
for cellRelayAndManagement AAL2/Cell Relay BW is 95% and AAL5 BW is 5%.
|
|
50% of AAL2/Cell Relay BW is for RTVBR.
|
|
for dataTerm AAL2/Cell Relay BW is 5% and AAL5 BW is 95%.
|
|
50% of AAL2/Cell Relay BW is for RTVBR.
|
|
for voiceGateway AAL2/Cell Relay BW is 95% and AAL5 BW is 5%.
|
|
95% of AAL2/Cell Relay BW is for RTVBR.
|
|
for hybridLowAal5Data AAL2/Cell Relay BW is 75% and AAL5 BW is 25%.
|
|
95% of AAL2/Cell Relay BW is for RTVBR.
|
|
for hybridDefault AAL2/Cell Relay BW is 60% and AAL5 BW is 40%.
|
|
75% of AAL2/Cell Relay BW is for RTVBR.
|
|
for hybridHighAal5Data AAL2/Cell Relay BW is 25% and AAL5 BW is 75%.
|
|
50% of AAL2/Cell Relay BW is for RTVBR.
|
|
|
|
For malc uplink cards (t1/e1, t3/e3 ima), the following qos values
|
|
and its associated BW can be configured:
|
|
|
|
qos name ubr% vbr% vbrrt%
|
|
|
|
vbnrt95rt5 0 95 5
|
|
vbnrt80rt15 5 80 15
|
|
vbnrt65rt30 5 65 30
|
|
vbnrt50rt45 5 50 45
|
|
vbnrt35rt60 5 35 60
|
|
vbnrt20rt75 5 20 75
|
|
vbnrt5rt95 5 5 95
|
|
vbnrt5rt95cbr 5 5 95
|
|
|
|
For all other cards valid value is notApplicable.
|
|
This field cannot be updated after row creation.
|
|
manual configuration is not supported in this
|
|
release.
|
|
"
|
|
DEFVAL { notApplicable }
|
|
::= { zhoneSysCardSoftwareConfigEntry 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.11
|
|
zhoneSysCardLineVoltage OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
not-used(1),
|
|
lv-60-volts(2),
|
|
lv-68-volts(3),
|
|
lv-95-volts(4),
|
|
lv-100-volts(5),
|
|
lv-110-volts(6)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sepcifies the voltage supplied to all lines (ports)
|
|
of this card, Used on ISDN line cards."
|
|
DEFVAL { not-used }
|
|
::= { zhoneSysCardSoftwareConfigEntry 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.12
|
|
zhoneSysCardVpiVciRange OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
not-applicable(1),
|
|
vpi-15-vci-63(2),
|
|
vpi-7-vci-127(3),
|
|
vpi-15-vci-127(4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum vpi and vci values that may be used for
|
|
this card."
|
|
DEFVAL { not-applicable }
|
|
::= { zhoneSysCardSoftwareConfigEntry 12 }
|
|
|
|
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.13
|
|
zhoneSysCardInitString OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..256))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ascii string containing tokens separated by ',' or ' '
|
|
which is used to configure special non-standard operations.
|
|
This string is blank for normal operation."
|
|
::= { zhoneSysCardSoftwareConfigEntry 13 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.10.1.14
|
|
zhoneSysCardWettingCurrent OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(1),
|
|
standard(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sepcifies weather wetting current is disabled
|
|
or enabled(standard)."
|
|
::= { zhoneSysCardSoftwareConfigEntry 14 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.11
|
|
zhoneCardRedundancy OBJECT IDENTIFIER ::= { zhoneSystem 11 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.11.1
|
|
nextCardRedundancyGroupId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the next unused card Redundancy Group Id."
|
|
::= { zhoneCardRedundancy 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.11.2
|
|
zhoneSysCardRedundancyTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneSysCardRedundancyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to group redundant cards and provide a mechanism
|
|
to indicate which card, if any, is preferred to be active.
|
|
|
|
A weight is assigned to each card to indicate a preference for which
|
|
card should be active. In the absence of any preference (e.g., weights
|
|
for all cards are equal), then the card with the lowest shelf/slot
|
|
number will become active.
|
|
|
|
Notes:
|
|
(1) A row for this table cannot exist without a corresponding entry in
|
|
the zhoneSysCardSoftwareConfigTable. Thus, a row-create cannot occur
|
|
on the this table until a corresponding row-create is performed on the
|
|
zhoneSysCardSoftwareConfigTable. When a row-delete is performed on
|
|
the zhoneSysCardSoftwareConfigTable, that action automatically performs
|
|
a row delete on the relevant entry in this table.
|
|
(2) Row deletes are disallowed on the zhoneCardRedundancy table.
|
|
"
|
|
::= { zhoneCardRedundancy 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.11.2.1
|
|
zhoneSysCardRedundancyEntry OBJECT-TYPE
|
|
SYNTAX ZhoneSysCardRedundancyEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for a particular card."
|
|
INDEX { zhoneSysCardRedundancyGroupId, zhoneShelfIndex, zhoneSlotIndex }
|
|
::= { zhoneSysCardRedundancyTable 1 }
|
|
|
|
|
|
ZhoneSysCardRedundancyEntry ::=
|
|
SEQUENCE {
|
|
zhoneSysCardRedundancyGroupId
|
|
Integer32,
|
|
zhoneSysCardRedundancyWeight
|
|
ZhoneRedundancyWeight,
|
|
zhoneSysCardRedundancyHoldActive
|
|
TruthValue,
|
|
zhoneSysCardRedundancyOperStatus
|
|
INTEGER,
|
|
zhoneSysCardRedundancyRowStatus
|
|
ZhoneRowStatus
|
|
}
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.11.2.1.1
|
|
zhoneSysCardRedundancyGroupId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique redundancy group to which the card is assigned."
|
|
::= { zhoneSysCardRedundancyEntry 1 }
|
|
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.11.2.1.2
|
|
zhoneSysCardRedundancyWeight OBJECT-TYPE
|
|
SYNTAX ZhoneRedundancyWeight
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A weight given to this card in determining whether
|
|
this card should become Active on system boot.
|
|
"
|
|
DEFVAL { noPreference }
|
|
::= { zhoneSysCardRedundancyEntry 2 }
|
|
|
|
|
|
--
|
|
--
|
|
-- 1.3.6.1.4.1.5504.3.1.11.2.1.3
|
|
zhoneSysCardRedundancyHoldActive OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set to true, this indicates that the card, when
|
|
Active, should remain in the Active state regardless
|
|
of any system events. This effectively disables
|
|
redundancy for the card group.
|
|
|
|
Note the the holdActive attribute can be simultaneously
|
|
set for multiple cards in the same redundancy group.
|
|
|
|
Not supported in the initial release.
|
|
"
|
|
DEFVAL { false }
|
|
::= { zhoneSysCardRedundancyEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.11.2.1.4
|
|
zhoneSysCardRedundancyOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noStatus(1),
|
|
cardIsActive(2),
|
|
cardIsStandby(3),
|
|
cardIsNotRedundant(4),
|
|
cardIsStandbyWithActiveLinks(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the status of the card. Note that a noStatus value means
|
|
that the card is in a non-operational state, such as booting or fault."
|
|
::= { zhoneSysCardRedundancyEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.11.2.1.5
|
|
zhoneSysCardRedundancyRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status used to create or delete an entry
|
|
for card redundancy. No entries are required to
|
|
be included in a table create as all entries have
|
|
default settings."
|
|
::= { zhoneSysCardRedundancyEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.12
|
|
zhoneSntpConfiguration OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration of parameters for SNTP. The SLMS node will act as
|
|
an SNTP Client and synchronize the time and date from the network
|
|
as specified in this table.
|
|
|
|
This table has one entry, which is automatically generated by
|
|
the system at boot time."
|
|
::= { zhoneSystem 12 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.12.1
|
|
zhoneSntpPrimaryServerIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the Primary NTP Server from which the date/time
|
|
will be synchronized."
|
|
::= { zhoneSntpConfiguration 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.12.2
|
|
zhoneSntpSecondaryServerIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the Secondary NTP Server from which the date/time
|
|
will be synchronized. Whenever the Primary NTP Server is not available,
|
|
the Secondary NTP Server will be used."
|
|
::= { zhoneSntpConfiguration 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.12.3
|
|
zhoneSntpLocalTimeZone OBJECT-TYPE
|
|
SYNTAX ZhoneLocalTimeZone
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the local time zone."
|
|
DEFVAL { 14 }
|
|
::= { zhoneSntpConfiguration 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.12.4
|
|
zhoneSntpDaylightSavingTime OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether Daylight Savings time is currently in affect."
|
|
DEFVAL { false }
|
|
::= { zhoneSntpConfiguration 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.12.5
|
|
zhoneSntpDaylightSavingStart OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..11))
|
|
UNITS "characters"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the daylight savings start time. The start time should be of the
|
|
format mm:dd:hh:mm"
|
|
::= { zhoneSntpConfiguration 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.12.6
|
|
zhoneSntpDaylightSavingEnd OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..11))
|
|
UNITS "characters"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the daylight savings end time. The start time should be of the fo
|
|
rmat mm:dd:hh:mm"
|
|
::= { zhoneSntpConfiguration 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.13
|
|
zhoneAdslPotsBypassRelay OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects contained in this ojbect identity are scalar
|
|
objects used for provisioning and viewing the Adsl Pots
|
|
LPF Bypass Relays."
|
|
::= { zhoneSystem 13 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.13.1
|
|
zhoneAdslPotsMaxActiveBypassRelays OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of Adsl Pots LPF Bypass Relays that
|
|
can be active on any one card at any given time. This number
|
|
is determined by the device and is calculated based upon
|
|
power consumption of the relays.
|
|
|
|
For example, if this value is set to 8, each Adsl Pots Splitter
|
|
w/Bypass Relay card can have 8 relays set to closed at any given
|
|
time.
|
|
|
|
This object is only valid for Adsl Pots Splitter
|
|
cards containing the Pots LBF Relays."
|
|
::= { zhoneAdslPotsBypassRelay 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.13.2
|
|
zhoneAdslPotsBypassRelayResetAll OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unchanged(1),
|
|
reset(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables the operator to force all Pots Bypass Relays
|
|
in the system back to a normal state.
|
|
|
|
This object is only valid for Adsl Pots Splitter
|
|
cards containing the Bypass Relays."
|
|
::= { zhoneAdslPotsBypassRelay 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.14
|
|
zhoneBulkStatsSystemConfiguration OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System wide configuration of bulk statistics, including ftp parameters
|
|
and enabling/disabling bulk statistics collection for the system.
|
|
"
|
|
::= { zhoneSystem 14 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.14.1
|
|
zhoneBulkStatsSystemCollectionEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether bulk stats collection has been enabled for the
|
|
system. If false, no collection is done. If true, the system
|
|
will collect the stats identified in the zhoneBulkStatCollectionTable."
|
|
DEFVAL { false }
|
|
::= { zhoneBulkStatsSystemConfiguration 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.14.2
|
|
zhoneBulkStatsSystemFtpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the FTP Server to which the collected stats will
|
|
be sent."
|
|
::= { zhoneBulkStatsSystemConfiguration 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.14.3
|
|
zhoneBulkStatsSystemFtpLogin OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FTP login name to be used for initiating the FTP file transfer
|
|
of the collected bulk statistics."
|
|
::= { zhoneBulkStatsSystemConfiguration 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.14.4
|
|
zhoneBulkStatsSystemFtpPassword OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FTP password to be used for initiating the FTP file transfer
|
|
of the collected bulk statistics."
|
|
::= { zhoneBulkStatsSystemConfiguration 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.14.5
|
|
zhoneBulkStatsSystemFtpDirPath OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the directory path on the FTP server into which the
|
|
bulk statistics files will be transferred.
|
|
|
|
The device will use this in a cd command, therefore a trailing '/'
|
|
is not required.
|
|
|
|
The ftp filename is constructed as follows:
|
|
<device-ip>_<timestamp>
|
|
where timestamp is YYYY.DD.MM.HH.MM in device local time.
|
|
For example:
|
|
172.16.80.291_2002.11.06.14.37
|
|
|
|
"
|
|
::= { zhoneBulkStatsSystemConfiguration 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.14.6
|
|
zhoneBulkStatsSystemOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
collectionInProgress(1),
|
|
collectionComplete(2),
|
|
collectionPeriodOverrun(3),
|
|
collectionAbortedNoDiskSpace(4),
|
|
collectionAbortedFileIoFailure(5),
|
|
collectionCompleteFtpFailure(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of the current collection interval.
|
|
Valid values are:
|
|
|
|
collectionInProgress:
|
|
- Collection for the current interval has started
|
|
collectionComplete:
|
|
- Collection for the current interval has completed, and the resulting
|
|
file has been transferred via ftp to the specified host.
|
|
collectionPeriodOverrun:
|
|
- Collection for the previous interval has not completed prior to the
|
|
start of the current collection interval. In this case, the collection
|
|
for the previous interval continues and the current interval is skipped.
|
|
This is an indication that either the system/network is too busy and/or
|
|
there are too many statistics being collected.
|
|
collectionAbortedNoDiskSpace:
|
|
- Collection for the current interval has been aborted due to insufficient
|
|
disk space on the device. The current interval is skipped.
|
|
collectionAbortedFileIoFailure:
|
|
- Collection for the current interval has been aborted due to a file IO
|
|
(write) error on the device. The current interval is skipped.
|
|
collectionCompleteFtpFailure:
|
|
- Collection for the current interval has completed, but the resulting
|
|
file could not be transferred via ftp to the specified host. The file
|
|
is queued for retry.
|
|
|
|
|
|
The operStatus is only pertinent if bulk stats have been enabled."
|
|
::= { zhoneBulkStatsSystemConfiguration 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15
|
|
zhoneBulkStatCollection OBJECT IDENTIFIER ::= { zhoneSystem 15 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15.1
|
|
nextBulkStatCollectionId OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Returns the next unused bulk statistics collection id."
|
|
::= { zhoneBulkStatCollection 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15.2
|
|
zhoneBulkStatCollectionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneBulkStatCollectionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to identify the statistics to be collected in bulk.
|
|
Each row in the table represents a statistic to be collected."
|
|
::= { zhoneBulkStatCollection 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15.2.1
|
|
zhoneBulkStatCollectionEntry OBJECT-TYPE
|
|
SYNTAX ZhoneBulkStatCollectionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the zhoneBulkStatCollectionTable."
|
|
INDEX { zhoneBulkStatCollectionId }
|
|
::= { zhoneBulkStatCollectionTable 1 }
|
|
|
|
|
|
ZhoneBulkStatCollectionEntry ::=
|
|
SEQUENCE {
|
|
zhoneBulkStatCollectionId
|
|
Integer32,
|
|
zhoneBulkStatEnabled
|
|
TruthValue,
|
|
zhoneBulkStatOID
|
|
OCTET STRING,
|
|
zhoneBulkStatInstance
|
|
ZhoneAdminString,
|
|
zhoneBulkStatIncludeChildren
|
|
TruthValue,
|
|
zhoneBulkStatsCollectionInterval
|
|
Integer32,
|
|
zhoneBulkStatCollectionRowStatus
|
|
ZhoneRowStatus
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15.2.1.1
|
|
zhoneBulkStatCollectionId OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique identifier of the bulk statistic row."
|
|
::= { zhoneBulkStatCollectionEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15.2.1.2
|
|
zhoneBulkStatEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate whether collection in enabled for this statistic."
|
|
DEFVAL { true }
|
|
::= { zhoneBulkStatCollectionEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15.2.1.3
|
|
zhoneBulkStatOID OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OID of the statistic to be collected in bulk."
|
|
::= { zhoneBulkStatCollectionEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15.2.1.4
|
|
zhoneBulkStatInstance OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Instance value for the zhoneBulkStatOID."
|
|
::= { zhoneBulkStatCollectionEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15.2.1.5
|
|
zhoneBulkStatIncludeChildren OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the statistic collection should include children.
|
|
|
|
Using the zhoneAtmStatsExtTable (presently with 8 statistics in the table)
|
|
as example, one could enable all stats for all 8 stats with one row entry
|
|
by setting the includeChildren flag. The zhoneBulkStatOID leaf would
|
|
contain the OID of zhoneAtmStatsExtEntry, the zhoneBulkStatInstance leaf
|
|
would identify the specific VCL, and this leaf would be set to TRUE."
|
|
DEFVAL { false }
|
|
::= { zhoneBulkStatCollectionEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15.2.1.6
|
|
zhoneBulkStatsCollectionInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection interval for this statistic.
|
|
Initially, all statistics will be collected on 15 minute intervals,
|
|
and sets to this object are not supported."
|
|
DEFVAL { 15 }
|
|
::= { zhoneBulkStatCollectionEntry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.15.2.1.7
|
|
zhoneBulkStatCollectionRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status is used to create or delete an entry in this table."
|
|
::= { zhoneBulkStatCollectionEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16
|
|
zhoneVideoSystemConfiguration OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configuration information for the MALC video
|
|
Head-End Server configuration. Managing the
|
|
Head-End configuration requires provisioning
|
|
the MALC with IP information as to the
|
|
various server addresses."
|
|
::= { zhoneSystem 16 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.1
|
|
zhoneVideoSystemConfigurationIndexNext OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object contains an appropriate value to be used
|
|
for zhoneVideoSystemConfigurationIndex when creating
|
|
entries in the zhoneVideoSystemConfigurationTable. The
|
|
value 0 indicates that no unassigned entries are
|
|
available. To obtain the zhoneVideoSystemConfigurationIndex
|
|
value for a new entry, the manager issues a management
|
|
protocol retrieval operation to obtain the current value
|
|
of this object. After each retrieval, the agent should
|
|
modify the value to the next unassigned index.
|
|
|
|
After a manager retrieves a value the agent will
|
|
determine through its local policy when this index
|
|
value will be made available for reuse."
|
|
::= { zhoneVideoSystemConfiguration 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2
|
|
zhoneVideoSystemConfigurationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneVideoSystemConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is used to identify and manage the Head-End Video Servers.
|
|
Each row in the table represents a Head-End Server."
|
|
::= { zhoneVideoSystemConfiguration 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1
|
|
zhoneVideoSystemConfigurationEntry OBJECT-TYPE
|
|
SYNTAX ZhoneVideoSystemConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines an entry in the Video System Configuration table."
|
|
INDEX { zhoneVideoSystemConfigurationIndex }
|
|
::= { zhoneVideoSystemConfigurationTable 1 }
|
|
|
|
|
|
ZhoneVideoSystemConfigurationEntry ::=
|
|
SEQUENCE {
|
|
zhoneVideoSystemConfigurationIndex
|
|
Integer32,
|
|
zhoneVideoSystemConfigurationNtpServerAddress
|
|
IpAddress,
|
|
zhoneVideoSystemConfigurationEpgServerAddress
|
|
IpAddress,
|
|
zhoneVideoSystemConfigurationSettopBoxHeadEndServerAddress
|
|
IpAddress,
|
|
zhoneVideoSystemConfigurationDefaultChannelAddress
|
|
IpAddress,
|
|
zhoneVideoSystemConfigurationNoChannelAvailableAddress
|
|
IpAddress,
|
|
zhoneVideoSystemConfigurationRowStatus
|
|
ZhoneRowStatus,
|
|
zhoneVideoSystemConfigurationEpgType
|
|
INTEGER,
|
|
zhoneVideoSystemConfigurationEpgPort
|
|
Unsigned32,
|
|
zhoneVideoSystemConfigurationEpgFtpAddress
|
|
IpAddress
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1.1
|
|
zhoneVideoSystemConfigurationIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value to identify this video system profile entry."
|
|
::= { zhoneVideoSystemConfigurationEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1.2
|
|
zhoneVideoSystemConfigurationNtpServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This oid contains the IP address of the NTP Server
|
|
for a particular Head-End."
|
|
::= { zhoneVideoSystemConfigurationEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1.3
|
|
zhoneVideoSystemConfigurationEpgServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This oid contains the IP adress of the EPG
|
|
(Electronic Programming Guide) for a particular
|
|
Head-End."
|
|
::= { zhoneVideoSystemConfigurationEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1.4
|
|
zhoneVideoSystemConfigurationSettopBoxHeadEndServerAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This oid contains the IP address of the set-top
|
|
box head-end server."
|
|
::= { zhoneVideoSystemConfigurationEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1.5
|
|
zhoneVideoSystemConfigurationDefaultChannelAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"his oid contains the multicast IP address of the channel
|
|
chosen to be the default channel for a particular head-
|
|
end provider."
|
|
::= { zhoneVideoSystemConfigurationEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1.6
|
|
zhoneVideoSystemConfigurationNoChannelAvailableAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This oid contains the multicast address of the channel
|
|
appropriate to display when a user selects a channel
|
|
that is not available or not in his channel profile."
|
|
::= { zhoneVideoSystemConfigurationEntry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1.7
|
|
zhoneVideoSystemConfigurationRowStatus OBJECT-TYPE
|
|
SYNTAX ZhoneRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"zhoneVideoSystemConfigurationRowStatus
|
|
is used to create/delete an entry in the
|
|
zhoneVideoSystemConfigurationTable."
|
|
::= { zhoneVideoSystemConfigurationEntry 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1.8
|
|
zhoneVideoSystemConfigurationEpgType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
minerva(1),
|
|
myrio(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the type of EPG that we are talking to. Currently only
|
|
Minerva, and Myrio are envisioned."
|
|
::= { zhoneVideoSystemConfigurationEntry 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1.9
|
|
zhoneVideoSystemConfigurationEpgPort OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This oid contains the port number to use when talking with the EPG."
|
|
::= { zhoneVideoSystemConfigurationEntry 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.16.2.1.10
|
|
zhoneVideoSystemConfigurationEpgFtpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This oid is the IP address to use when FTP data to/from the EPP server."
|
|
::= { zhoneVideoSystemConfigurationEntry 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17
|
|
zhoneCallDetailRecConfig OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System wide configuration of the Call Detail Recording."
|
|
::= { zhoneSystem 17 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17.1
|
|
zhoneCallDetailRecEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether CDR is enabled for this device. If false, the
|
|
CDR is disabled. If true, the CDR is enabled, each call is
|
|
recorded and a report is sent periodically to the most
|
|
preferable and active ftp server."
|
|
DEFVAL { false }
|
|
::= { zhoneCallDetailRecConfig 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17.2
|
|
zhoneCallDetailRecFlushLog OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, indicates the device to upload all pending call records
|
|
and empty the CDR log. After the uploading is completed the flag
|
|
is automatically set to false. In case of failure, the flag is
|
|
also set to false but the OperStatus indicates an error."
|
|
DEFVAL { false }
|
|
::= { zhoneCallDetailRecConfig 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17.3
|
|
zhoneCallDetailRecCurrFtpServer OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
primary(1),
|
|
secondary(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Currently active FTP server. In case all FTP servers are not
|
|
available the none(3) value is assigned. "
|
|
DEFVAL { none }
|
|
::= { zhoneCallDetailRecConfig 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17.4
|
|
zhoneCallDetailRecPrimFtpIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the primary FTP server. If configured and available,
|
|
it becomes the most preferable FTP server."
|
|
::= { zhoneCallDetailRecConfig 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17.5
|
|
zhoneCallDetailRecSecFtpIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the secondary FTP server. This server is automatically
|
|
selected when the primary FTP server is not configured or unavailable.
|
|
The device will probe the primary FTP server and return to it
|
|
automatically once it becomes available. "
|
|
::= { zhoneCallDetailRecConfig 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17.6
|
|
zhoneCallDetailRecFtpLogin OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FTP login name to be used by the device for initiating the
|
|
transfer."
|
|
::= { zhoneCallDetailRecConfig 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17.7
|
|
zhoneCallDetailRecFtpPassword OBJECT-TYPE
|
|
SYNTAX ZhoneAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FTP password to be used by the device during login to the
|
|
FTP server."
|
|
::= { zhoneCallDetailRecConfig 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17.8
|
|
zhoneCallDetailRecFtpDirPath OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The directory path on the FTP server where a file with CDR records
|
|
is to be stored. The trailing '/' is not required.
|
|
Within this directory, each device will have its subdirectory.
|
|
The device subdirectory name is constructed from the device IP
|
|
address as follows: '172-16-80-224'. The device subdirectory
|
|
is created remotely from the device by using the FTP protocol.
|
|
All call records from a device are stored in text files. All file
|
|
names for a single device are unique and constructed as follows:
|
|
YYYY-MM-DD-HH-MM-SN, where:
|
|
YYYY - year
|
|
MM - month
|
|
DD - day
|
|
HH - hour
|
|
MM - minute
|
|
SN - sequence number in case two subsequent raports are
|
|
generated within the same minute."
|
|
::= { zhoneCallDetailRecConfig 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17.9
|
|
zhoneCallDetailRecRepPeriod OBJECT-TYPE
|
|
SYNTAX Integer32 (1..60)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies the device reporting period in minutes. During this
|
|
period a device is collecting CDR records and when this period
|
|
elapses it triggers automatic uploading to the active FTP server.
|
|
After successful transfer the CDR log is pruned.
|
|
When the CDR log reaches its 'high water mark' before the end of
|
|
the current reporting period, the transfer takes place immediately,
|
|
then a new reporting period is commenced."
|
|
DEFVAL { 30 }
|
|
::= { zhoneCallDetailRecConfig 9 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.17.10
|
|
zhoneCallDetailRecOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
ftpFailure(2),
|
|
overrun(3),
|
|
noConfig(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"CDR Operational Status:
|
|
active - CDR is enabled and working OK.
|
|
ftpFailure - CDR cannot upload log due to lack of available FTP server.
|
|
overrun - In result of FTP failure, CDR discards the oldest records.
|
|
noConfig - CDR is disabled due to lack of correct configuration."
|
|
::= { zhoneCallDetailRecConfig 10 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.19
|
|
zhoneSoftwareUpgrade OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to upgrade device software during hitless upgrade."
|
|
::= { zhoneSystem 19 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.19.1
|
|
zhoneSoftwareUpgradeAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sw-upgrade(1),
|
|
sw-upgrade-auto-swact(2),
|
|
swact(3),
|
|
swact-abort(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes which software upgrade action to perform."
|
|
::= { zhoneSoftwareUpgrade 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.19.2
|
|
zhoneSoftwareUpgradeStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
not-started(1),
|
|
standby-upgrade-started(2),
|
|
standby-upgrade-completed(3),
|
|
standby-upgrade-aborted(4),
|
|
swact-started(5),
|
|
swact-complete(6),
|
|
swact-aborted(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes status of software upgrade."
|
|
DEFVAL { not-started }
|
|
::= { zhoneSoftwareUpgrade 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.19.3
|
|
zhoneSoftwareUpgradeTimeStarted OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time software upgrade started."
|
|
::= { zhoneSoftwareUpgrade 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.19.4
|
|
zhoneSoftwareUpgradeTimeCompleted OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Time software upgrade completed."
|
|
::= { zhoneSoftwareUpgrade 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20
|
|
zhoneFileSystem OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents SNMP view of Zhone File System available from
|
|
Zhone Command Line Interface."
|
|
::= { zhoneSystem 20 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.1
|
|
zhoneFileAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
cd(1),
|
|
dir(2),
|
|
copy(3),
|
|
rm(4),
|
|
mkdir(5),
|
|
rmdir(6),
|
|
mv(7)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"File Action:
|
|
|
|
cd(1) - change directory command used in conjunction with
|
|
zhoneDirectory location which specifies destination
|
|
directory.
|
|
dir(2) - listing of files within the directory specified
|
|
by zhoneDirectoryPath. The generated file
|
|
listing is written to zhoneFileTable.
|
|
copy(3) - make a copy zhoneFileName1 and writes it to
|
|
zhoneFileName2. User should prepend pathname to
|
|
both filenames if not in default directory.
|
|
rm(4) - removes file specified by zhoneFileName1.
|
|
mkdir(5) - creates a subdirectory specified by
|
|
zhoneFileName1.
|
|
rmdir(6) - removes directory specified by zhoneFileName1.
|
|
If directory not empty, returns error.
|
|
mv(7) - moves zhoneFileName1 to zhoneFileName2."
|
|
::= { zhoneFileSystem 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.2
|
|
zhoneFileName1 OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used when zhoneFileAction set to 'copy'. This will be the
|
|
source filename of the file to be copied. Prepend a new path
|
|
if you want to specify a file in a directory different from
|
|
your current directory."
|
|
::= { zhoneFileSystem 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.3
|
|
zhoneFileName2 OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used when zhoneFileAction set to 'copy'. This will be the
|
|
resulting filename of the copied file. Prepend a new path
|
|
if you want file to be written to a different directory,
|
|
otherwise it will be written to same directory."
|
|
::= { zhoneFileSystem 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.4
|
|
zhoneDirectoryPath OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a read-write object. If read, it returns your current
|
|
directory location. If written, it can be used by the 'cd'
|
|
change directory command in order to specify the new
|
|
directory, or by the 'dir' command to specify which directory
|
|
from which to list files.
|
|
|
|
NOTE: If it is written and a 'cd' or 'dir' command not
|
|
performed, the next time it is read, it will return your
|
|
current directory."
|
|
::= { zhoneFileSystem 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.5
|
|
zhoneDirectoryBytesAvailable OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of bytes available on the disk."
|
|
::= { zhoneFileSystem 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.6
|
|
zhoneBytesReservedForProvisioning OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When in the 'datastor' directory, this object returns
|
|
the number of bytes reserved for Zhone Provisioning.
|
|
These are the number of bytes reserved for the
|
|
database expansion."
|
|
::= { zhoneFileSystem 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.7
|
|
zhoneFileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone File Listing Table.
|
|
|
|
Used to view file information for files resident
|
|
on Zhone Flash Memory Devices."
|
|
::= { zhoneFileSystem 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.7.1
|
|
zhoneFileEntry OBJECT-TYPE
|
|
SYNTAX ZhoneFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Zhone File Listing Entry.
|
|
|
|
Used to view file information for files resident
|
|
on Zhone Flash Memory Devices."
|
|
INDEX { zhoneFileIndex }
|
|
::= { zhoneFileTable 1 }
|
|
|
|
|
|
ZhoneFileEntry ::=
|
|
SEQUENCE {
|
|
zhoneFileIndex
|
|
Integer32,
|
|
zhoneFileDirectoryPath
|
|
ZhoneFileName,
|
|
zhoneFileName
|
|
ZhoneFileName,
|
|
zhoneFilePrivilege
|
|
OCTET STRING,
|
|
zhoneFileSize
|
|
Unsigned32,
|
|
zhoneFileLastModified
|
|
DateAndTime
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.7.1.1
|
|
zhoneFileIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..32767)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index values of rows in this table. Positive ascending
|
|
numbers starting at 1."
|
|
::= { zhoneFileEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.7.1.2
|
|
zhoneFileDirectoryPath OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Directory path of file."
|
|
::= { zhoneFileEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.7.1.3
|
|
zhoneFileName OBJECT-TYPE
|
|
SYNTAX ZhoneFileName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Filename."
|
|
::= { zhoneFileEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.7.1.4
|
|
zhoneFilePrivilege OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"File privileges."
|
|
::= { zhoneFileEntry 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.7.1.5
|
|
zhoneFileSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"File size in bytes."
|
|
::= { zhoneFileEntry 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.20.7.1.6
|
|
zhoneFileLastModified OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Date and time file last modified."
|
|
::= { zhoneFileEntry 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.21
|
|
cpeMgr OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Access, control and runtime details for managing CPEs connected
|
|
to Zhone CO devices. Some of these objects will reside on
|
|
CO devices, while others will reside on CPEs supporting CPE
|
|
Manager controls. "
|
|
::= { zhoneSystem 21 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.22
|
|
zhoneEnhancedStatus OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object Identity for Zhone Enhanced Status."
|
|
::= { zhoneSystem 22 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.22.1
|
|
zhoneEnhancedStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZhoneEnhancedStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of Zhone Enhanced Status codes which are used to extend the
|
|
current IETF definitions found in snmpdef.h. These status
|
|
codes and corresponding text can be used by both
|
|
SNMP and CLI.
|
|
|
|
(see below for current error codes):
|
|
|
|
/* Values for error_status */
|
|
#define NO_ERROR 0
|
|
#define TOO_BIG 1
|
|
#define NO_SUCH_NAME 2
|
|
#define BAD_VALUE 3
|
|
#define READ_ONLY 4
|
|
#define GEN_ERR 5
|
|
#define NO_ACCESS 6
|
|
#define WRONG_TYPE 7
|
|
#define WRONG_LENGTH 8
|
|
#define WRONG_ENCODING 9
|
|
#define WRONG_VALUE 10
|
|
#define NO_CREATION 11
|
|
#define INCONSISTENT_VALUE 12
|
|
#define RESOURCE_UNAVAILABLE 13
|
|
#define COMMIT_FAILED 14
|
|
#define UNDO_FAILED 15
|
|
#define AUTHORIZATION_ERROR 16
|
|
#define NOT_WRITABLE 17
|
|
#define INCONSISTENT_NAME 18
|
|
#define LAST_ERROR 19
|
|
"
|
|
::= { zhoneEnhancedStatus 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.22.1.1
|
|
zhoneEnhancedStatusEntry OBJECT-TYPE
|
|
SYNTAX ZhoneEnhancedStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Row in the table."
|
|
INDEX { zhoneEnhancedStatusIndex }
|
|
::= { zhoneEnhancedStatusTable 1 }
|
|
|
|
|
|
ZhoneEnhancedStatusEntry ::=
|
|
SEQUENCE {
|
|
zhoneEnhancedStatusIndex
|
|
Integer32,
|
|
zhoneEnhancedStatusCode
|
|
Integer32,
|
|
zhoneEnhancedStatusText
|
|
OCTET STRING
|
|
}
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.22.1.1.1
|
|
zhoneEnhancedStatusIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry index value."
|
|
::= { zhoneEnhancedStatusEntry 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.22.1.1.2
|
|
zhoneEnhancedStatusCode OBJECT-TYPE
|
|
SYNTAX Integer32 (20..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status code returned in SNMP packet as a result of issuing getproc_error,
|
|
nextproc_error, testproc_error or setproc_error. Also used for reporting
|
|
CLI errors."
|
|
::= { zhoneEnhancedStatusEntry 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.1.22.1.1.3
|
|
zhoneEnhancedStatusText OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Given the zhoneEnhancedStatusCode, this is the corresponding
|
|
text to be displayed to user in either SNMP or CLI."
|
|
::= { zhoneEnhancedStatusEntry 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.1
|
|
zhoneTrapCpePoll OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the Trap information related to the Zhone CPE
|
|
polling task which exists on the BAN. This task polls
|
|
all connected Zhone CPE devices by sending SNMP Set messages
|
|
(zhoneZmsExists=TRUE and zhoneZmsConnectionStatus=ACTIVE)
|
|
to each device. If a certain number of polls fails for a
|
|
device, a Trap is sent to the ZMS indicating the Zhone CPE
|
|
device whose connection has been lost."
|
|
::= { zhoneTrapModules 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.1.0
|
|
zhoneTrapCpePollV2Traps OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identity adds a zero(0) for the next to last
|
|
sub-identifier which should be used for new SNMPv2 Traps."
|
|
::= { zhoneTrapCpePoll 0 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.1.0.1
|
|
zhoneTrapCpeConnectionDown NOTIFICATION-TYPE
|
|
OBJECTS { zhoneShelfNumber, zhoneSlotNumber, pportNumber, subPortNumber, ipIfVpi,
|
|
ipIfVci, ipIfLgId, ipIfAddr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Zhone CPE connection in down. The Trap objects
|
|
specify the location of the Zhone CPE device."
|
|
::= { zhoneTrapCpePollV2Traps 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.1.0.2
|
|
zhoneTrapCpeConnectionUp NOTIFICATION-TYPE
|
|
OBJECTS { zhoneShelfNumber, zhoneSlotNumber, pportNumber, subPortNumber, ipIfVpi,
|
|
ipIfVci, ipIfLgId, ipIfAddr }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Zhone CPE connection that has previously been down is
|
|
now up. The Trap objects specify the location of the
|
|
Zhone CPE device."
|
|
::= { zhoneTrapCpePollV2Traps 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.2
|
|
zhoneTrapConfigSync OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The trap sent when an object in the
|
|
device datastore is changed"
|
|
::= { zhoneTrapModules 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.2.0
|
|
zhoneTrapConfigSyncV2Traps OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identity adds a zero(0) for the next to last
|
|
sub-identifier which should be used for new SNMPv2 Traps."
|
|
::= { zhoneTrapConfigSync 0 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.2.0.1
|
|
zhoneTrapConfigSyncChange NOTIFICATION-TYPE
|
|
OBJECTS { zhoneConfigSyncAction, zhoneConfigSyncPriority }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An object in the device datastore has changed"
|
|
::= { zhoneTrapConfigSyncV2Traps 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.2.0.2
|
|
zhoneTrapConfigSyncReset NOTIFICATION-TYPE
|
|
OBJECTS { zhoneTrapConfigSyncResetInterval, zhoneTrapConfigSyncResetCount, zhoneTrapConfigSyncResetLastFtpTime, zhoneTrapConfigSyncResetCurrentTime }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ConfigSync has timed-out on the device and has
|
|
subsequently been reset to a nominal state by
|
|
the device. Resetting configsync on the device
|
|
consists of closing the FTP data and control sockets,
|
|
setting the configsyncstatus to syncerror, cleaning up
|
|
any pending configsync records, resetting the
|
|
ConfigSync state machine to the initial state, and
|
|
throwing a ConfigSyncReset Trap (this trap)."
|
|
::= { zhoneTrapConfigSyncV2Traps 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.4
|
|
zhoneTrapSnmp OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These are traps generated by SNMP, itself, when an
|
|
error condition is detected."
|
|
::= { zhoneTrapModules 4 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.4.0
|
|
zhoneTrapSnmpV2Traps OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identity adds a zero(0) for the next to last
|
|
sub-identifier which should be used for new SNMPv2 Traps."
|
|
::= { zhoneTrapSnmp 0 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.4.0.1
|
|
zhoneTrapSnmpSATimeout NOTIFICATION-TYPE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trap occurs when an error condition is detected in
|
|
sub agent, causing the Zhone SNMP Master agent to timeout.
|
|
Shelf and slot in the trap will refer to the subagent card which
|
|
caused the timeout."
|
|
::= { zhoneTrapSnmpV2Traps 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.5
|
|
zhoneTrapCardRedundancy OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Card Redundancy Traps"
|
|
::= { zhoneTrapModules 5 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.5.0
|
|
zhoneCardRedundancyV2Traps OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identity adds a zero(0) for the next to last
|
|
sub-identifier which should be used for new SNMPv2 Traps."
|
|
::= { zhoneTrapCardRedundancy 0 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.5.0.1
|
|
zhoneCardRedundancyStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { zhoneShelfNumber, zhoneSlotNumber, zhoneSysCardRedundancyGroupId }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trap indicates that the specified card has become active."
|
|
::= { zhoneCardRedundancyV2Traps 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.5.0.2
|
|
zhoneCardRedundancyUnsafe NOTIFICATION-TYPE
|
|
OBJECTS { zhoneSysCardRedundancyOperStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Trap if system is provisioned for redundant uplinks but is not redundancy ready."
|
|
::= { zhoneCardRedundancyV2Traps 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.6
|
|
zhoneTrapBulkStatistics OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bulk Statistics Traps."
|
|
::= { zhoneTrapModules 6 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.6.0
|
|
zhoneBulkStatisticsV2Traps OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identity adds a zero(0) for the next to last
|
|
sub-identifier which should be used for new SNMPv2 Traps."
|
|
::= { zhoneTrapBulkStatistics 0 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.6.0.1
|
|
zhoneBulkStatisticsIntervalFailure NOTIFICATION-TYPE
|
|
OBJECTS { zhoneBulkStatsSystemOperStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification alerts the manager that the device could not
|
|
successfully complete the current collection interval. The
|
|
zhoneBulkStatsSystemOperStatus is included in the trap to indicate
|
|
the type of failure."
|
|
::= { zhoneBulkStatisticsV2Traps 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.7
|
|
zhoneTrapZms OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object identifier under which Zhone ZMS related traps
|
|
are defined."
|
|
::= { zhoneTrapModules 7 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.7.0
|
|
zhoneTrapZmsV2Traps OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNMPv2 zero(0) prefix for Zhone ZMS traps."
|
|
::= { zhoneTrapZms 0 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.3.8.7.0.1
|
|
zhoneZmsBlockCliChange NOTIFICATION-TYPE
|
|
OBJECTS { zhoneZmsBlockCli }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This is trap is generated when the value of zhoneZmsBlockCli
|
|
is changed."
|
|
::= { zhoneTrapZmsV2Traps 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.8
|
|
zhoneCompliances OBJECT IDENTIFIER ::= { zhone 8 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.8.1
|
|
zhoneGroups OBJECT IDENTIFIER ::= { zhoneCompliances 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.8.1.1
|
|
zhoneSystemGroup OBJECT-GROUP
|
|
OBJECTS { zhoneZmsExists, zhoneZmsConnectionStatus, zhoneZmsIpAddress, zhoneZmsBlockCli, zhoneTrapsCommunityName,
|
|
zhoneTrapsSequenceNumber, zhoneTrapsResendSequenceNumber, zhoneTrapsAckedSequenceNumber, zhoneTrapsSeverity, zhoneTrapsAllowedCategories,
|
|
zhoneTrapsAdminStatus, zhoneTrapsRowStatus, zhoneTrapsGatewayTrapServerAddress, zhoneTrapVersion, zhoneTrapFlags,
|
|
zhoneTrapShelf, zhoneTrapSlot, zhoneTrapPort, zhoneTrapSubPort, zhoneTrapProviderId,
|
|
zhoneTrapText, zhoneTrapPortType, zhoneTrapPortTypeExtension, zhoneTrapAlarmAction, zhoneTrapAlarmId,
|
|
zhoneTrapAlarmSeverity, zhoneTrapConfigSyncResetInterval, zhoneTrapConfigSyncResetCount, zhoneTrapConfigSyncResetLastFtpTime, zhoneTrapConfigSyncResetCurrentTime,
|
|
zhoneTrapUtcTime, zhoneConfigSyncExists, zhoneConfigSyncOverflow, zhoneConfigSyncPriority, zhoneConfigSyncAction,
|
|
zhoneConfigSyncFileName, zhoneConfigSyncStatus, zhoneConfigSyncUserName, zhoneConfigSyncUserPassword, zhoneAdminCommunityAccess,
|
|
zhoneAdminCommunityAccessListIndex, zhoneAdminCommunityRowStatus, zhoneNextAdminAccessIndex, zhoneSwCardSwFileName, zhoneSwLoadRowStatus,
|
|
zhoneSnmpErrorDisplayString, zhoneSnmpErrorTime, zhoneSysSwLogin, zhoneSysSwPassword, zhoneSysSwPriLoadServer,
|
|
zhoneSysSwSecLoadServer, zhoneSysSwRemoteFilePath, zhoneSysSwLocalFilePath, zhoneSysSwAdmin, zhoneSysSwStatus,
|
|
zhoneSysRebootAdmin, zhoneSysRebootCardType, zhoneSysCardSpecificSwFileName, zhoneSysCardSwSpecificVers, zhoneSysCardUpgradeSwFileName,
|
|
zhoneSysCardSwUpgradeVers, zhoneSysCardSwType, zhoneSysCardSwEnable, zhoneSysCardSwUpgradeEnable, zhoneSysCardRowStatus,
|
|
zhoneSysCardLineType, zhoneSysCardAtmConfiguration, zhoneSysCardLineVoltage, zhoneSysCardVpiVciRange, zhoneSysCardInitString,
|
|
zhoneSysCardWettingCurrent, nextCardRedundancyGroupId, zhoneSysCardRedundancyGroupId, zhoneSysCardRedundancyWeight, zhoneBulkStatCollectionRowStatus,
|
|
zhoneVideoSystemConfigurationRowStatus, zhoneBulkStatInstance, zhoneSysCardRedundancyHoldActive, zhoneAdminAccessRowStatus, zhoneUserIdNext,
|
|
zhoneUserTotalFailedLogins, zhoneUserName, zhoneUserPassword, zhoneUserPrompt, zhoneUserAccessLevel,
|
|
zhoneUserAdmin, zhoneUserLogins, zhoneUserFailedLogins, zhoneUserRowStatus, zhoneSystemConfigurationNumShelves,
|
|
zhoneSystemConfigurationShelvesArray, zhoneSystemConfigurationNumCards, zhoneSystemConfigurationIpAddress, zhoneSystemConfigurationAlternateIpAddress, zhoneSystemConfigurationDateAndTime,
|
|
zhoneSystemConfigurationCountryRegion, zhoneSystemConfigurationRingSource, zhoneSystemCurrentClockSource, zhoneSystemSecondaryClockSource, zhoneSystemClockEligibility,
|
|
zhoneSystemClockWeight, zhoneSystemClockAvailabilityStatus, zhoneSystemClockTxClockMode, zhoneSystemConsoleLogging, zhoneSystemRevertiveClockSource,
|
|
zhoneSystemVoiceBandwidthCheck, zhoneAlarmLevelsEnabled, zhoneSystemUserAuthMethod, zhoneSystemRadiusAuthIndex, zhoneSystemSecureFTP,
|
|
zhoneSystemWebInterface, zhoneSystemConfigurationOptions, zhoneSystemConfigurationReservedVlanIdStart, zhoneSystemConfigurationReservedVlanIdCount, zhoneSysCardRedundancyOperStatus,
|
|
zhoneSysCardRedundancyRowStatus, zhoneSntpPrimaryServerIpAddr, zhoneSntpSecondaryServerIpAddr, zhoneSntpLocalTimeZone, zhoneSntpDaylightSavingTime,
|
|
zhoneAdslPotsMaxActiveBypassRelays, zhoneAdslPotsBypassRelayResetAll , zhoneBulkStatsSystemCollectionEnabled, zhoneBulkStatsSystemFtpAddress, zhoneBulkStatsSystemFtpLogin,
|
|
zhoneBulkStatsSystemFtpPassword, zhoneBulkStatsSystemFtpDirPath, zhoneBulkStatsSystemOperStatus, nextBulkStatCollectionId, zhoneBulkStatEnabled,
|
|
zhoneBulkStatOID, zhoneBulkStatIncludeChildren, zhoneBulkStatsCollectionInterval, zhoneVideoSystemConfigurationIndexNext, zhoneVideoSystemConfigurationNtpServerAddress,
|
|
zhoneVideoSystemConfigurationEpgServerAddress, zhoneVideoSystemConfigurationSettopBoxHeadEndServerAddress, zhoneVideoSystemConfigurationDefaultChannelAddress, zhoneVideoSystemConfigurationNoChannelAvailableAddress, zhoneVideoSystemConfigurationEpgType,
|
|
zhoneVideoSystemConfigurationEpgPort, zhoneVideoSystemConfigurationEpgFtpAddress, zhoneCallDetailRecEnabled, zhoneCallDetailRecFlushLog, zhoneCallDetailRecCurrFtpServer,
|
|
zhoneCallDetailRecPrimFtpIpAddr, zhoneCallDetailRecSecFtpIpAddr, zhoneCallDetailRecFtpLogin, zhoneCallDetailRecFtpPassword, zhoneCallDetailRecFtpDirPath,
|
|
zhoneCallDetailRecRepPeriod, zhoneCallDetailRecOperStatus, zhoneSoftwareUpgradeAction, zhoneSoftwareUpgradeStatus, zhoneSoftwareUpgradeTimeStarted,
|
|
zhoneSoftwareUpgradeTimeCompleted, zhoneFileAction, zhoneFileName1, zhoneFileName2, zhoneDirectoryPath,
|
|
zhoneDirectoryBytesAvailable, zhoneBytesReservedForProvisioning, zhoneFileDirectoryPath, zhoneFileName, zhoneFilePrivilege,
|
|
zhoneFileSize, zhoneFileLastModified, zhoneEnhancedStatusCode, zhoneEnhancedStatusText }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneGroups 1 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.8.1.2
|
|
zhoneDeprecatedSystemGroup OBJECT-GROUP
|
|
OBJECTS { zhonePrimaryClockSource }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneGroups 2 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.8.1.3
|
|
zhoneTrapGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { zhoneTrapCpeConnectionDown, zhoneTrapCpeConnectionUp, zhoneTrapConfigSyncChange, zhoneTrapConfigSyncReset, zhoneTrapSnmpSATimeout,
|
|
zhoneCardRedundancyStatusChange, zhoneCardRedundancyUnsafe, zhoneBulkStatisticsIntervalFailure }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneGroups 3 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.5504.8.1.4
|
|
zhoneDeprecatedTrapGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { zhoneZmsBlockCliChange }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { zhoneGroups 4 }
|
|
|
|
|
|
|
|
END
|
|
|
|
--
|
|
-- genSystem.mib
|
|
--
|