WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/utstarcom/UTSECURITY-MIB

510 lines
15 KiB
Plaintext
Raw Blame History

-- *****************************************************************************
-- Filename: epon-security.mib
-- Description: Contains iSwitch MIB Extension.
-- MIB Version: 1.00
--
-- Copyright (C) 2001 by UTStarcom, Inc. All rights reserved.
-- Reproduction of this document is authorized on the condition that
-- the foregoing copyright notice is included.
--
-- NOTE: The contents of this document are subject to change without notice
-- *****************************************************************************
-- *****************************************************************************
-- Version: $Id: $
-- Last Modified: $DateTime: $
-- Change List #: $Change: $
-- *****************************************************************************
UTSECURITY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, IpAddress FROM SNMPv2-SMI
Counter, TimeTicks FROM RFC1155-SMI
RowStatus, TruthValue FROM SNMPv2-TC
ifIndex, DisplayString FROM RFC1213-MIB
MacAddress, BridgeId, Timeout FROM BRIDGE-MIB
uts-epon FROM UTS-EPON-MIB;
-- utsGeponBBS1000plus FROM UTS-BBS-COMMON-MIB;
utSecurity MODULE-IDENTITY
LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994
ORGANIZATION "UTSTARcom Inc"
CONTACT-INFO
"Postal: UTSTARcom Inc
Alameda, California 9xxxx
Tel: +1 510 555 1212
E-Mail: mibs@utstar.com "
DESCRIPTION
"Contains UT EPON MIB Extensions."
::= { uts-epon 5 }
utsEfmPonSecurityExt OBJECT IDENTIFIER ::= { utSecurity 1 }
utsEponSecExtObjects OBJECT IDENTIFIER ::= { utsEfmPonSecurityExt 1 }
------
------ 1. Security
------
utsDot3SecurityMIB OBJECT IDENTIFIER ::= { utsEponSecExtObjects 1 }
utsDot3SecurityObjects OBJECT IDENTIFIER ::= { utsDot3SecurityMIB 1 }
utsDot3SecurityOltObjects OBJECT IDENTIFIER ::= { utsDot3SecurityObjects 1 }
------
------ OLT
------
--utsDot3SecurityOltTable OBJECT-TYPE
--SYNTAX SEQUENCE OF UtsDot3SecurityOltEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
--"Table for dot3 OLT security MIBs."
-- ::= { utsDot3SecurityOltObjects 2 }
--
--utsDot3SecurityOltEntry OBJECT-TYPE
--SYNTAX UtsDot3SecurityOltEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
--"An entry in the dot3 OLT MIBs table."
-- INDEX { ifIndex }
-- ::= { utsDot3SecurityOltTable 1 }
--
--UtsDot3SecurityOltEntry ::=
-- SEQUENCE {
-- utsDot3SecurityOltAuthState INTEGER
-- }
--
--utsDot3SecurityOltAuthState OBJECT-TYPE
--SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
--}
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"OLT Authenticator state."
-- ::= { utsDot3SecurityOltEntry 1 }
------
------ ONU
------
--utsDot3SecurityTable OBJECT-TYPE
--SYNTAX SEQUENCE OF UtsDot3SecurityEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
--"Table for dot3 ONU security MIBs."
-- ::= { utsDot3SecurityObjects 3 }
--
--utsDot3SecurityEntry OBJECT-TYPE
--SYNTAX UtsDot3SecurityEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
--"An entry in the dot3 OLT MIBs table."
-- INDEX { ifIndex }
-- ::= { utsDot3SecurityTable 1 }
--
--UtsDot3SecurityEntry ::=
-- SEQUENCE {
-- utsDot3SecurityAuthState INTEGER,
-- utsDot3SecurityAuthMethod INTEGER,
-- utsDot3SecurityAuthParamIndex INTEGER,
-- utsDot3SecurityEncryAuthState INTEGER,
-- utsDot3SecurityEncryEnable TruthValue,
-- utsDot3SecurityEncryDirection INTEGER,
-- utsDot3SecurityEncryKeyUpdateMethod INTEGER,
-- utsDot3SecurityEncryKey OCTET STRING(SIZE(0..16))
--
-- }
--
--utsDot3SecurityAuthState OBJECT-TYPE
--SYNTAX INTEGER {
-- authorized(1),
-- unauthorized(2)
--}
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
--"Authentication state."
-- ::= { utsDot3SecurityEntry 1 }
--
--utsDot3SecurityAuthMethod OBJECT-TYPE
--SYNTAX INTEGER {
-- deny-always(1),
-- authorize-always(2),
-- sec-802-1x-radius(3)
--}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"A ONU will be authorized if the method is disabled. If 802_1x_radius is
--selected, then the supported authentication algorithm is EAP-MD5."
-- ::= { utsDot3SecurityEntry 2 }
--
--utsDot3SecurityAuthParamIndex OBJECT-TYPE
--SYNTAX INTEGER
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"It's a index pointing to the entry in the corresponding authentication
--parameter table for the specified authentication method. So multiple ONUs
--can either share a same authentication setting or have its own
--authentication setting."
-- ::= { utsDot3SecurityEntry 3 }
--
--utsDot3SecurityEncryAuthState OBJECT-TYPE
--SYNTAX INTEGER {
-- enabled(1),
-- disabled(2)
--}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"Encryption state."
-- ::= { utsDot3SecurityEntry 4 }
--
--
--utsDot3SecurityEncryEnable OBJECT-TYPE
--SYNTAX TruthValue
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"Encryption state."
-- ::= { utsDot3SecurityEntry 5 }
--
--utsDot3SecurityEncryDirection OBJECT-TYPE
--SYNTAX INTEGER {
-- downlink(1),
-- bothlinks(2)
--}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"Encryption direction."
--::= { utsDot3SecurityEntry 6 }
--
--
--utsDot3SecurityEncryKeyUpdateMethod OBJECT-TYPE
--SYNTAX INTEGER {
-- passave(0),
-- disabled(1)
--}
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"Encryption key update method."
-- ::= { utsDot3SecurityEntry 7 }
--
--utsDot3SecurityEncryKey OBJECT-TYPE
--SYNTAX OCTET STRING(SIZE(0..16))
-- MAX-ACCESS read-write
-- STATUS current
-- DESCRIPTION
--"Encryption key. The initial value is from the authentication bit sequence
--in ONU registration message."
-- ::= { utsDot3SecurityEntry 8 }
------
------
------
utsDot3Security802RadiusObjects OBJECT IDENTIFIER ::= { utsDot3SecurityMIB 2}
------
------ radius server's Group
------
utsDot3Security802RadiusGroup OBJECT IDENTIFIER ::= { utsDot3Security802RadiusObjects 1 }
utsDot3Security8021xRadiusAutoSwitch OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enabled or Disabled auto switch to primary or secondary."
::= { utsDot3Security802RadiusGroup 1 }
utsDot3Security8021xRadiusRetryTimes OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius server retry times, range 1..10."
::= { utsDot3Security802RadiusGroup 2 }
utsDot3Security8021xRadiusTimeout OBJECT-TYPE
SYNTAX INTEGER (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius server message sent time out seconds."
::= { utsDot3Security802RadiusGroup 3 }
utsDot3Security8021xRadiusBackToPrimary OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius server back to run on primary after X minutes."
::= { utsDot3Security802RadiusGroup 4 }
utsDot3Security8021xRadiusRealm OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius server realm."
::= { utsDot3Security802RadiusGroup 5}
utsDot3Security8021xRadiusNasIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius server nsa ip address."
::= { utsDot3Security802RadiusGroup 6}
utsDot3Security8021xRadiusSvrPrimaryOnuAuthIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's primary IP address."
::= { utsDot3Security802RadiusGroup 11 }
utsDot3Security8021xRadiusSvrPrimaryOnuAuthPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's primary port number."
::= { utsDot3Security802RadiusGroup 12 }
utsDot3Security8021xRadiusPrimaryOnuAuthSharedKey OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary shared secret key."
::= { utsDot3Security802RadiusGroup 13 }
utsDot3Security8021xRadiusSvrSecondaryOnuAuthIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's secondary IP address."
::= { utsDot3Security802RadiusGroup 14 }
utsDot3Security8021xRadiusSvrSecondaryOnuAuthPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's secondary port number."
::= { utsDot3Security802RadiusGroup 15 }
utsDot3Security8021xRadiusSecondaryOnuAuthSharedKey OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary hared secret key."
::= { utsDot3Security802RadiusGroup 16 }
utsDot3Security8021xRadiusSvrPrimaryOnuAcctIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's primary IP address."
::= { utsDot3Security802RadiusGroup 17 }
utsDot3Security8021xRadiusSvrPrimaryOnuAcctPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's primary port number."
::= { utsDot3Security802RadiusGroup 18 }
utsDot3Security8021xRadiusPrimaryOnuAcctSharedKey OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary shared secret key."
::= { utsDot3Security802RadiusGroup 19 }
utsDot3Security8021xRadiusSvrSecondaryOnuAcctIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's secondary IP address."
::= { utsDot3Security802RadiusGroup 20 }
utsDot3Security8021xRadiusSvrSecondaryOnuAcctPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's secondary port number."
::= { utsDot3Security802RadiusGroup 21 }
utsDot3Security8021xRadiusSecondaryOnuAcctSharedKey OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary hared secret key."
::= { utsDot3Security802RadiusGroup 22 }
utsDot3Security8021xRadiusSvrPrimaryCliAuthIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's primary IP address."
::= { utsDot3Security802RadiusGroup 23 }
utsDot3Security8021xRadiusSvrPrimaryCliAuthPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's primary port number."
::= { utsDot3Security802RadiusGroup 24 }
utsDot3Security8021xRadiusPrimaryCliAuthSharedKey OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary shared secret key."
::= { utsDot3Security802RadiusGroup 25 }
utsDot3Security8021xRadiusSvrSecondaryCliAuthIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's secondary IP address."
::= { utsDot3Security802RadiusGroup 26 }
utsDot3Security8021xRadiusSvrSecondaryCliAuthPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's secondary port number."
::= { utsDot3Security802RadiusGroup 27 }
utsDot3Security8021xRadiusSecondaryCliAuthSharedKey OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary hared secret key."
::= { utsDot3Security802RadiusGroup 28 }
utsDot3Security8021xRadiusSvrPrimaryCliAcctIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's primary IP address."
::= { utsDot3Security802RadiusGroup 29 }
utsDot3Security8021xRadiusSvrPrimaryCliAcctPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's primary port number."
::= { utsDot3Security802RadiusGroup 30 }
utsDot3Security8021xRadiusPrimaryCliAcctSharedKey OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary shared secret key."
::= { utsDot3Security802RadiusGroup 31 }
utsDot3Security8021xRadiusSvrSecondaryCliAcctIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's secondary IP address."
::= { utsDot3Security802RadiusGroup 32 }
utsDot3Security8021xRadiusSvrSecondaryCliAcctPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS server's secondary port number."
::= { utsDot3Security802RadiusGroup 33 }
utsDot3Security8021xRadiusSecondaryCliAcctSharedKey OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary hared secret key."
::= { utsDot3Security802RadiusGroup 34 }
END
View Git Blame Copy Permalink