689 lines
27 KiB
Plaintext
689 lines
27 KiB
Plaintext
TPLINK-MLDSNOOPING-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
OBJECT-TYPE,MODULE-IDENTITY,IpAddress
|
|
FROM SNMPv2-SMI
|
|
TPRowStatus
|
|
FROM TPLINK-TC-MIB
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
tplinkMgmt
|
|
FROM TPLINK-MIB;
|
|
|
|
|
|
tplinkMldSnoopingMIB MODULE-IDENTITY
|
|
LAST-UPDATED "201212141432Z"
|
|
ORGANIZATION "TPLINK"
|
|
CONTACT-INFO "www.tplink.com"
|
|
DESCRIPTION
|
|
"Private MIB for mldSnooping manage."
|
|
REVISION "201212141432Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { tplinkMgmt 43 }
|
|
|
|
tplinkMldSnoopingMIBObjects OBJECT IDENTIFIER ::= {tplinkMldSnoopingMIB 1}
|
|
tplinkMldSnoopingNotifications OBJECT IDENTIFIER ::= {tplinkMldSnoopingMIB 2}
|
|
|
|
tpMldSnooping OBJECT IDENTIFIER ::= {tplinkMldSnoopingMIBObjects 1}
|
|
tpMldFilter OBJECT IDENTIFIER ::= {tplinkMldSnoopingMIBObjects 2}
|
|
tpMldPacketStatistic OBJECT IDENTIFIER ::= {tplinkMldSnoopingMIBObjects 3}
|
|
tpMldMultigroup OBJECT IDENTIFIER ::= {tplinkMldSnoopingMIBObjects 4}
|
|
tpMldStaticMultigroup OBJECT IDENTIFIER ::= {tplinkMldSnoopingMIBObjects 5}
|
|
|
|
--**************
|
|
--MLD SNOOPING
|
|
--**************
|
|
tpMldSnoopingGlobalConfig OBJECT IDENTIFIER ::= {tpMldSnooping 1}
|
|
|
|
tpMldSnoopingEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --disable
|
|
enable(1) --enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable MLD Snooping function globally on the Switch.
|
|
0. disable
|
|
1. enable"
|
|
::= { tpMldSnoopingGlobalConfig 1 }
|
|
|
|
|
|
tpMldUnknownMulticastPacket OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
forward(0), --forward
|
|
discard(1) --discard
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select the operation for the switch to process unknown multicast.
|
|
0. forward
|
|
1. discard"
|
|
::= { tpMldSnoopingGlobalConfig 2 }
|
|
|
|
tpMldPortConfig OBJECT IDENTIFIER ::= {tpMldSnooping 2}
|
|
|
|
|
|
tpMldPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPMLDPORTENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MLD Snooping (Internet Group Management Protocol Snooping)
|
|
is a multicast control mechanism running on Layer 2 switch.
|
|
It can effectively prevent multicast groups being broadcasted
|
|
in the network."
|
|
::= { tpMldPortConfig 1 }
|
|
|
|
tpMldPortEntry OBJECT-TYPE
|
|
SYNTAX TPMLDPORTENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of the information of port configure."
|
|
INDEX { ifIndex }
|
|
::= { tpMldPortTable 1 }
|
|
|
|
TPMLDPORTENTRY ::=
|
|
SEQUENCE {
|
|
tpMldSnoopingPortEnable
|
|
INTEGER,
|
|
tpMldFastLeavePortEnable
|
|
INTEGER,
|
|
tpMldPortLag
|
|
OCTET STRING
|
|
|
|
}
|
|
tpMldSnoopingPortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable MLD Snooping for the desired port.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpMldPortEntry 2 }
|
|
|
|
tpMldFastLeavePortEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable Fast Leave feature for the desired port.
|
|
If Fast Leave is enabled for a port, the Switch will immediately
|
|
remove this port from the multicast group upon receiving MLD
|
|
leave messages.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpMldPortEntry 3 }
|
|
|
|
tpMldPortLag OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the LAG number which the port belongs to."
|
|
::= { tpMldPortEntry 4 }
|
|
|
|
|
|
tpMldVlanConfig OBJECT IDENTIFIER ::= {tpMldSnooping 3}
|
|
|
|
tpMldVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPMLDVLANENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Multicast groups established by MLD Snooping are based on VLANs.
|
|
You can configure different MLD parameters for different VLANs.
|
|
"
|
|
::= { tpMldVlanConfig 1 }
|
|
|
|
tpMldVlanEntry OBJECT-TYPE
|
|
SYNTAX TPMLDVLANENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of the information of mldsnooping."
|
|
INDEX {tpMldVlanId}
|
|
::= { tpMldVlanTable 1 }
|
|
|
|
TPMLDVLANENTRY ::=
|
|
SEQUENCE {
|
|
tpMldVlanId
|
|
INTEGER,
|
|
tpMldVlanEnable
|
|
INTEGER,
|
|
tpMldVlanFastLeave
|
|
INTEGER,
|
|
tpMldVlanReportSuppression
|
|
INTEGER,
|
|
tpMldRouterTime
|
|
INTEGER,
|
|
tpMldMemberTime
|
|
INTEGER,
|
|
tpMldLeaveTime
|
|
INTEGER,
|
|
tpMldRouterPort
|
|
OCTET STRING,
|
|
tpMldForbiddenRouterPort
|
|
OCTET STRING,
|
|
tpMldQueryEnable
|
|
INTEGER,
|
|
tpMldQueryInterval
|
|
INTEGER,
|
|
tpMldQueryMaxResponseTime
|
|
INTEGER,
|
|
tpMldQueryGeneralSrcIp
|
|
OCTET STRING,
|
|
tpMldQueryLastMemberCount
|
|
INTEGER,
|
|
tpMldQueryLastMemberInterval
|
|
INTEGER,
|
|
tpMldVlanStatus
|
|
TPRowStatus
|
|
}
|
|
|
|
tpMldVlanId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the VLAN ID to enable MLD Snooping for the desired VLAN,1-4094."
|
|
::= { tpMldVlanEntry 1 }
|
|
|
|
tpMldVlanEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable MLD Snooping for the desired vlan.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpMldVlanEntry 2 }
|
|
|
|
tpMldVlanFastLeave OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable Fast Leave feature for the desired vlan.
|
|
If Fast Leave is enabled for a vlan, the Switch will immediately
|
|
remove this port from the multicast group upon receiving MLD
|
|
leave messages.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpMldVlanEntry 3 }
|
|
|
|
tpMldVlanReportSuppression OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable MLD Snooping report suppression function globally on the Switch.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpMldVlanEntry 4 }
|
|
|
|
tpMldRouterTime OBJECT-TYPE
|
|
SYNTAX INTEGER(60..600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the aging time of the router port. Within this time,
|
|
if the switch don't receive MLD query message from the router port,
|
|
it will consider this port is not a router port any more,0,60-600 second."
|
|
::= { tpMldVlanEntry 5 }
|
|
|
|
tpMldMemberTime OBJECT-TYPE
|
|
SYNTAX INTEGER(60..600)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the aging time of the member port. Within this time,
|
|
if the switch don't receive MLD report message from the member port,
|
|
it will consider this port is not a member port any more,0,60-600 second."
|
|
::= { tpMldVlanEntry 6}
|
|
|
|
tpMldLeaveTime OBJECT-TYPE
|
|
SYNTAX INTEGER(1..30)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the leave time for the VLAN.
|
|
When the switch receives a leave message from a port to leave a multicast group,
|
|
it will wait for a leave time before removing the port from the multicast group."
|
|
::= { tpMldVlanEntry 7}
|
|
|
|
tpMldRouterPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Config the static router ports which are mainly used in the network with
|
|
stable topology."
|
|
::= { tpMldVlanEntry 8 }
|
|
|
|
tpMldForbiddenRouterPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Config the forbidden router ports which are mainly used to forbidden
|
|
specified ports to become router ports."
|
|
::= { tpMldVlanEntry 9 }
|
|
|
|
tpMldQueryEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
disable(0), --Disable
|
|
enable(1) --Enable
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Select Enable/Disable MLD Querier.
|
|
0. Disable
|
|
1. Enable"
|
|
::= { tpMldVlanEntry 10 }
|
|
|
|
tpMldQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(10..300)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the Query message interval time. The Querier will send General Query Message with this interval. The interval is ranging from 10 to 300 seconds."
|
|
::= { tpMldVlanEntry 11 }
|
|
|
|
tpMldQueryMaxResponseTime OBJECT-TYPE
|
|
SYNTAX INTEGER(1..25)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the value of Maximum Response Time field of the Query message. The host is expected to response to an IGMP general query within this time. The time is ranging from 1 to 25 seconds."
|
|
::= { tpMldVlanEntry 12}
|
|
|
|
tpMldQueryGeneralSrcIp OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the General Query Message source IP address."
|
|
::= { tpMldVlanEntry 13}
|
|
|
|
tpMldQueryLastMemberCount OBJECT-TYPE
|
|
SYNTAX INTEGER(1..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the Last Listener Query numbers. When the multicast group has no more member ports,
|
|
it will send this numbers of Specific Query Message to check whether there is another member.
|
|
It is ranging from 1 to 5."
|
|
::= { tpMldVlanEntry 14}
|
|
|
|
tpMldQueryLastMemberInterval OBJECT-TYPE
|
|
SYNTAX INTEGER(1..5)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the Last Listener Query interval time. When the multicast group has no more member ports,
|
|
it will send the Specific Query Message with this interval time to check whether there is another
|
|
member. The interval is ranging from 1 to 5 seconds."
|
|
::= { tpMldVlanEntry 15}
|
|
|
|
tpMldVlanStatus OBJECT-TYPE
|
|
SYNTAX TPRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the following two values are states:
|
|
these values may be read or written
|
|
active(1),
|
|
notInService(2),
|
|
|
|
the following value is a state:
|
|
this value may be read, but not written
|
|
notReady(3),
|
|
|
|
the following three values are
|
|
actions: these values may be written,
|
|
but are never read
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)"
|
|
::= { tpMldVlanEntry 16 }
|
|
|
|
|
|
|
|
--**************
|
|
--MLD FILTER
|
|
--**************
|
|
|
|
tpMldPortFilterConfig OBJECT IDENTIFIER ::= { tpMldFilter 1 }
|
|
tpMldFilterPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPMLDFILTERPORTENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the switch receives MLD report message, it examines
|
|
the multicast filtering IP ID configured on the access port
|
|
to determine if the port can join the multicast group.
|
|
If the multicast IP is not filtered, the switch will add
|
|
the port to the forward port list of the multicast group.
|
|
Otherwise, the switch will drop the MLD report message.
|
|
In that way, you can control the multicast groups that users
|
|
can access."
|
|
::= { tpMldPortFilterConfig 1 }
|
|
|
|
tpMldFilterPortEntry OBJECT-TYPE
|
|
SYNTAX TPMLDFILTERPORTENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of the information of a port param."
|
|
INDEX { ifIndex }
|
|
::= { tpMldFilterPortTable 1 }
|
|
|
|
TPMLDFILTERPORTENTRY ::=
|
|
SEQUENCE {
|
|
tpMldFilterMaxGroup
|
|
INTEGER,
|
|
tpMldFilterMaxGroupAction
|
|
INTEGER,
|
|
tpMldFilterBindAddrId
|
|
OCTET STRING,
|
|
tpMldFilterPortLag
|
|
OCTET STRING
|
|
|
|
}
|
|
|
|
tpMldFilterMaxGroup OBJECT-TYPE
|
|
SYNTAX INTEGER(0..1000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specify the maximum number of multicast groups to prevent some
|
|
ports taking up too much bandwidth."
|
|
::= { tpMldFilterPortEntry 2 }
|
|
|
|
tpMldFilterMaxGroupAction OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
drop(0), --Drop
|
|
replace(1) --Replace
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The policy should be taken when the number of multicast group
|
|
a port has joined reach the maximum.
|
|
0.Drop: drop the successive report packet, and this port can
|
|
not join any other multicast group.
|
|
1.Replace: when the port joins another new multicast group,it
|
|
will quit the existing multicast group randomly."
|
|
::= { tpMldFilterPortEntry 3 }
|
|
|
|
tpMldFilterBindAddrId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..3))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enter the profile ID the port will be bound to. Only one profile
|
|
can be bound to each port."
|
|
::= { tpMldFilterPortEntry 4 }
|
|
|
|
tpMldFilterPortLag OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the LAG number which the port belongs to."
|
|
::= { tpMldFilterPortEntry 5 }
|
|
|
|
--**************
|
|
--PACKET STAT
|
|
--**************
|
|
tpMldPktStat OBJECT IDENTIFIER ::= { tpMldPacketStatistic 1 }
|
|
|
|
tpMldPktStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPMLDPKTSTATENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of multicast statistic Table."
|
|
::= { tpMldPktStat 1 }
|
|
|
|
tpMldPktStatEntry OBJECT-TYPE
|
|
SYNTAX TPMLDPKTSTATENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of multicast packet statistics over each port."
|
|
INDEX { ifIndex }
|
|
::= { tpMldPktStatTable 1 }
|
|
|
|
TPMLDPKTSTATENTRY ::=
|
|
SEQUENCE {
|
|
tpMldQueryPktStat
|
|
INTEGER,
|
|
tpMldReportV1PktStat
|
|
INTEGER,
|
|
tpMldReportV2PktStat
|
|
INTEGER,
|
|
tpMldDonePktStat
|
|
INTEGER,
|
|
tpMldErrorPktStat
|
|
INTEGER
|
|
}
|
|
|
|
tpMldQueryPktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of query packets the port received."
|
|
::= { tpMldPktStatEntry 2 }
|
|
|
|
tpMldReportV1PktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of MLDv1 report packets the port received."
|
|
::= { tpMldPktStatEntry 3 }
|
|
|
|
tpMldReportV2PktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of MLDv2 report packets the port received."
|
|
::= { tpMldPktStatEntry 4 }
|
|
|
|
tpMldDonePktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of done packets the port received."
|
|
::= { tpMldPktStatEntry 6 }
|
|
|
|
tpMldErrorPktStat OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the number of error packets the port received."
|
|
::= { tpMldPktStatEntry 7 }
|
|
|
|
tpIpMldPktStatClear OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
commit(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"mld packet statistic clear."
|
|
::= { tpMldPktStat 2 }
|
|
|
|
--**************
|
|
--GROUP SHOW
|
|
--**************
|
|
tpMldMulticastGroups OBJECT IDENTIFIER ::= { tpMldMultigroup 1 }
|
|
|
|
tpMldMulticastGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPMLDMULTICASTGROUPENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of multicast groups Table."
|
|
::= { tpMldMulticastGroups 1 }
|
|
|
|
tpMldMulticastGroupEntry OBJECT-TYPE
|
|
SYNTAX TPMLDMULTICASTGROUPENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of multicast packet statistics over each port."
|
|
INDEX { tpMldMulticastIP , tpMldVlanID}
|
|
::= { tpMldMulticastGroupTable 1 }
|
|
|
|
TPMLDMULTICASTGROUPENTRY ::=
|
|
SEQUENCE {
|
|
tpMldMulticastIP
|
|
OCTET STRING,
|
|
tpMldVlanID
|
|
INTEGER,
|
|
tpMldForwardPorts
|
|
OCTET STRING,
|
|
tpMldGrouptype
|
|
INTEGER
|
|
}
|
|
|
|
tpMldMulticastIP OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the multicast IP address."
|
|
::= { tpMldMulticastGroupEntry 1 }
|
|
|
|
tpMldVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the VLAN ID."
|
|
::= { tpMldMulticastGroupEntry 2 }
|
|
|
|
tpMldForwardPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..50))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the forward ports of multicast group."
|
|
::= { tpMldMulticastGroupEntry 3 }
|
|
|
|
tpMldGrouptype OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
static(0),
|
|
dynamic(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Displays the type of multicast group."
|
|
::= { tpMldMulticastGroupEntry 4 }
|
|
--**************
|
|
--STATIC GROUP
|
|
--**************
|
|
tpMldMulticastStaticGroups OBJECT IDENTIFIER ::= { tpMldStaticMultigroup 1 }
|
|
|
|
tpMldMulticastStaticGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TPMLDMULTICASTSTATICGROUPENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of multicast groups Table."
|
|
::= { tpMldMulticastStaticGroups 1 }
|
|
|
|
tpMldMulticastStaticGroupEntry OBJECT-TYPE
|
|
SYNTAX TPMLDMULTICASTSTATICGROUPENTRY
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry contains of multicast packet statistics over each port."
|
|
INDEX { tpMldStaticMulticastIP , tpMldStaticVlanID }
|
|
::= { tpMldMulticastStaticGroupTable 1 }
|
|
|
|
TPMLDMULTICASTSTATICGROUPENTRY ::=
|
|
SEQUENCE {
|
|
tpMldStaticMulticastIP
|
|
OCTET STRING,
|
|
tpMldStaticVlanID
|
|
INTEGER,
|
|
tpMldStaticForwardPorts
|
|
OCTET STRING,
|
|
tpMldStaticGroupStatus
|
|
TPRowStatus
|
|
}
|
|
|
|
tpMldStaticMulticastIP OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The multicast IP address."
|
|
::= { tpMldMulticastStaticGroupEntry 1 }
|
|
|
|
tpMldStaticVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN ID."
|
|
::= { tpMldMulticastStaticGroupEntry 2 }
|
|
|
|
tpMldStaticForwardPorts OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE (0..50))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The forward ports of multicast group."
|
|
::= { tpMldMulticastStaticGroupEntry 3 }
|
|
|
|
tpMldStaticGroupStatus OBJECT-TYPE
|
|
SYNTAX TPRowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The following values are states:
|
|
these values may be used as follow:
|
|
|
|
active(1),if the entry is being used.
|
|
notInService(2),destory the entry.
|
|
notReady(3),destory the entry.
|
|
createAndGo(4),not being used
|
|
createAndWait(5),creat a new entry
|
|
destroy(6),destory the entry."
|
|
::= { tpMldMulticastStaticGroupEntry 4 }
|
|
|
|
|
|
|
|
END |