WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/tplink/TPLINK-IPADDR-MIB

577 lines
17 KiB
Plaintext
Raw Blame History

TPLINK-IPADDR-MIB DEFINITIONS ::= BEGIN
IMPORTS
TPRowStatus
FROM TPLINK-TC-MIB
tplinkMgmt
FROM TPLINK-MIB
OBJECT-TYPE,IpAddress
FROM SNMPv2-SMI
ifIndex
FROM RFC1213-MIB;
TpInterfaceMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Ip address alloc-mode:
-'none(0)', which indicate vlan interface has no ip address.
-'manual(1)',vlan interface's ip address is manually assigned.
-'dhcp(2)',vlan interface's ip address is allocated by DHCP protocol.
-'bootp(3)',vlan interface's ip address is allocated by BOOTP protocol."
SYNTAX INTEGER{
none(0),
manual(1),
dhcp(2),
bootp(3)
}
TpInterfaceMode2 ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Ip address alloc-mode:
-'none(0)', which indicate vlan interface has no ip address.
-'manual(1)',vlan interface's ip address is manually assigned."
SYNTAX INTEGER{
none(0),
manual(1)
}
TpPortLinkMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Port link-mode: bridge(0) or route(1)"
SYNTAX INTEGER {
bridge(0),
route(1)
}
tplinkIpAddrMIB MODULE-IDENTITY
LAST-UPDATED "201212130930Z"
ORGANIZATION "TPLINK"
CONTACT-INFO "www.tplink.com"
DESCRIPTION "Private MIB for ip address configuration."
REVISION "201212130930Z"
DESCRIPTION
"Initial version of this MIB module."
::= { tplinkMgmt 6 }
tplinkIpAddrMIBObjects OBJECT IDENTIFIER ::= { tplinkIpAddrMIB 1 }
tplinkIpRoutingConfig OBJECT IDENTIFIER ::= { tplinkIpAddrMIB 2 }
tplinkIpAddrNotifications OBJECT IDENTIFIER ::= { tplinkIpAddrMIB 3 }
tpInterfaceConfig OBJECT IDENTIFIER ::= {tplinkIpAddrMIBObjects 1}
--**************
--Set vlan Interface
--**************
tpVlanInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF STATICADDRCTRLENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of VLAN interface entries. VLAN interface is a virtual interface which is working in the level 3,
it is used to communicate between the VLAN in the level 3, and it is not a physical entity in the device.
Each VLAN has a VLAN interface,and the VLAN interface can transmit the packets for the port which belong to this VLAN.
In general,because the VLAN can isolate broadcast, each VLAN has a subnet address,and as a gateway of the subnet address,
the VLAN interface can do the transmittance basic of IP address in level 3 for the packet which need to span the subnet address. "
::= { tpInterfaceConfig 1 }
tpVlanInterfaceConfigEntry OBJECT-TYPE
SYNTAX STATICADDRCTRLENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The interface can be added or removed ."
INDEX { tpVlanInterfaceVlanId,tpVlanInterfaceIp,tpVlanInterfaceSecondary }
::= { tpVlanInterfaceTable 1 }
STATICADDRCTRLENTRY ::=
SEQUENCE {
tpVlanInterfaceMode
TpInterfaceMode,
tpVlanInterfaceIp
IpAddress,
tpVlanInterfaceMsk
IpAddress,
tpVlanInterfaceVlanId
INTEGER,
tpVlanInterfaceSecondary
INTEGER,
tpVlanInterfaceName
OCTET STRING (SIZE (0..20)),
tpVlanInterfaceDhcpOption12
OCTET STRING (SIZE (0..64)),
tpVlanInterfaceStatus
TPRowStatus
}
tpVlanInterfaceVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of the VLAN interface,and it must be in the 802.1Q VLAN of the ingress port."
::= { tpVlanInterfaceConfigEntry 1 }
tpVlanInterfaceSecondary OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the ip address is secondary IP."
::= { tpVlanInterfaceConfigEntry 2 }
tpVlanInterfaceMode OBJECT-TYPE
SYNTAX TpInterfaceMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address alloc-mode of VLAN interface."
::= { tpVlanInterfaceConfigEntry 3 }
tpVlanInterfaceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the VLAN interface."
::= { tpVlanInterfaceConfigEntry 4 }
tpVlanInterfaceMsk OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP mask of the VLAN interface."
::= { tpVlanInterfaceConfigEntry 5 }
tpVlanInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The name of the VLAN interface."
::= { tpVlanInterfaceConfigEntry 6 }
tpVlanInterfaceDhcpOption12 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The DHCP Option 12 of the VLAN interface."
::= { tpVlanInterfaceConfigEntry 7 }
tpVlanInterfaceStatus OBJECT-TYPE
SYNTAX TPRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The following values are states:
these values may be used as follow:
active(1),if the entry is being used.
notInService(2),destory the entry.
notReady(3),destory the entry.
createAndGo(4),not being used
createAndWait(5),creat a new entry
destroy(6),destory the entry."
::={tpVlanInterfaceConfigEntry 8 }
--**************
--Set Loopback Interface
--**************
tpLoopbackInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF LOOPBACKADDRCTRLENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Loopback interface entries. Loopback interface is a virtual interface which purely software implemented,
commonly used as router-id or network test. "
::= { tpInterfaceConfig 2 }
tpLoopbackInterfaceConfigEntry OBJECT-TYPE
SYNTAX LOOPBACKADDRCTRLENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The interface can be added or removed ."
INDEX { tpLoopbackInterfaceId,tpLoopbackInterfaceIp,tpLoopbackInterfaceSecondary }
::= { tpLoopbackInterfaceTable 1 }
LOOPBACKADDRCTRLENTRY ::=
SEQUENCE {
tpLoopbackInterfaceMode
TpInterfaceMode2,
tpLoopbackInterfaceIp
IpAddress,
tpLoopbackInterfaceMsk
IpAddress,
tpLoopbackInterfaceId
INTEGER,
tpLoopbackInterfaceSecondary
INTEGER,
tpLoopbackInterfaceName
OCTET STRING (SIZE (0..20)),
tpLoopbackInterfaceDhcpOption12
OCTET STRING (SIZE (0..64)),
tpLoopbackInterfaceStatus
TPRowStatus
}
tpLoopbackInterfaceId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of the loopback interface (1-2147483647)."
::= { tpLoopbackInterfaceConfigEntry 1 }
tpLoopbackInterfaceSecondary OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the ip address is secondary IP."
::= { tpLoopbackInterfaceConfigEntry 2 }
tpLoopbackInterfaceMode OBJECT-TYPE
SYNTAX TpInterfaceMode2
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address alloc-mode of loopback interface."
::= { tpLoopbackInterfaceConfigEntry 3 }
tpLoopbackInterfaceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the loopback interface."
::= { tpLoopbackInterfaceConfigEntry 4 }
tpLoopbackInterfaceMsk OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP mask of the loopback interface. 32-bit mask is required."
::= { tpLoopbackInterfaceConfigEntry 5 }
tpLoopbackInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The name of the loopback interface."
::= { tpLoopbackInterfaceConfigEntry 6 }
tpLoopbackInterfaceDhcpOption12 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The DHCP Option 12 of the loopback interface."
::= { tpLoopbackInterfaceConfigEntry 7 }
tpLoopbackInterfaceStatus OBJECT-TYPE
SYNTAX TPRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Action status."
::={tpLoopbackInterfaceConfigEntry 8 }
--**************
--Set Routed port
--**************
tpRoutedPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ROUTEDPORTADDRCTRLENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of routed port. A routed port is special port mode which you can configure Layer 3 function like RIP, OSPF,
while some Layer 2 function like speed, flow-control is also available. "
::= { tpInterfaceConfig 3 }
tpRoutedPortConfigEntry OBJECT-TYPE
SYNTAX ROUTEDPORTADDRCTRLENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The interface can be added or removed ."
INDEX { ifIndex, tpRoutedPortIp, tpRoutedPortSecondary}
::= { tpRoutedPortTable 1 }
ROUTEDPORTADDRCTRLENTRY ::=
SEQUENCE {
tpRoutedPortMode
TpInterfaceMode,
tpRoutedPortIp
IpAddress,
tpRoutedPortMsk
IpAddress,
tpRoutedPortId
OCTET STRING,
tpRoutedPortSecondary
INTEGER,
tpRoutedPortName
OCTET STRING (SIZE (0..20)),
tpRoutedPortDhcpOption12
OCTET STRING (SIZE (0..64)),
tpRoutedPortStatus
TPRowStatus
}
tpRoutedPortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port id."
::= { tpRoutedPortConfigEntry 1 }
tpRoutedPortSecondary OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the ip address is secondary IP."
::= { tpRoutedPortConfigEntry 2 }
tpRoutedPortMode OBJECT-TYPE
SYNTAX TpInterfaceMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address alloc-mode of the routed port."
::= { tpRoutedPortConfigEntry 3 }
tpRoutedPortIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the routed port."
::= { tpRoutedPortConfigEntry 4 }
tpRoutedPortMsk OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP mask of the routed port."
::= { tpRoutedPortConfigEntry 5 }
tpRoutedPortName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The name of the routed port."
::= { tpRoutedPortConfigEntry 6 }
tpRoutedPortDhcpOption12 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The DHCP Option 12 of the routed port."
::= { tpRoutedPortConfigEntry 7 }
tpRoutedPortStatus OBJECT-TYPE
SYNTAX TPRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Action status."
::={ tpRoutedPortConfigEntry 8 }
--**************
--Set channelGroup Interface
--**************
tpPortChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF PORTCHANNELADDRCTRLENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port-channel interface entries. "
::= { tpInterfaceConfig 4 }
tpPortChannelConfigEntry OBJECT-TYPE
SYNTAX PORTCHANNELADDRCTRLENTRY
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The interface can be added or removed ."
INDEX { tpPortChannelId,tpPortChannelIp,tpPortChannelSecondary }
::= { tpPortChannelTable 1 }
PORTCHANNELADDRCTRLENTRY ::=
SEQUENCE {
tpPortChannelMode
TpInterfaceMode,
tpPortChannelIp
IpAddress,
tpPortChannelMsk
IpAddress,
tpPortChannelId
INTEGER,
tpPortChannelSecondary
INTEGER,
tpPortChannelName
OCTET STRING (SIZE (0..20)),
tpPortChannelDhcpOption12
OCTET STRING (SIZE (0..64)),
tpPortChannelStatus
TPRowStatus
}
tpPortChannelId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of the port-channel interface."
::= { tpPortChannelConfigEntry 1 }
tpPortChannelSecondary OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the ip address is secondary IP."
::= { tpPortChannelConfigEntry 2 }
tpPortChannelMode OBJECT-TYPE
SYNTAX TpInterfaceMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address alloc-mode of port-channel interface."
::= { tpPortChannelConfigEntry 3 }
tpPortChannelIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the port-channel interface."
::= { tpPortChannelConfigEntry 4 }
tpPortChannelMsk OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP mask of the port-channel interface."
::= { tpPortChannelConfigEntry 5 }
tpPortChannelName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The name of the port-channel interface."
::= { tpPortChannelConfigEntry 6 }
tpPortChannelDhcpOption12 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The DHCP Option 12 of the port-channel interface."
::= { tpPortChannelConfigEntry 7 }
tpPortChannelStatus OBJECT-TYPE
SYNTAX TPRowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The following values are states:
these values may be used as follow:
active(1),if the entry is being used.
notInService(2),destory the entry.
notReady(3),destory the entry.
createAndGo(4),not being used
createAndWait(5),creat a new entry
destroy(6),destory the entry."
::={tpPortChannelConfigEntry 8 }
tpInterfaceGatewayConfig OBJECT IDENTIFIER ::= {tpInterfaceConfig 5}
tpInterfaceGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The gateway of the interface. "
::= { tpInterfaceGatewayConfig 1 }
tpIpRouting OBJECT-TYPE
SYNTAX INTEGER{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0. disable
1. enable"
::= { tplinkIpRoutingConfig 1 }
vlanInterfaceIpChange NOTIFICATION-TYPE
OBJECTS
{
tpVlanInterfaceName
}
STATUS current
DESCRIPTION
"A vlanInterfaceIpChange notification is sent when the
ip address of the vlan interface has changed. "
::= { tplinkIpAddrNotifications 1 }
loopbackInterfaceIpChange NOTIFICATION-TYPE
OBJECTS
{
tpLoopbackInterfaceName
}
STATUS current
DESCRIPTION
"A loopbackInterfaceIpChange notification is sent when the
ip address of the loopback interface has changed. "
::= { tplinkIpAddrNotifications 2 }
routedPortIpChange NOTIFICATION-TYPE
OBJECTS
{
tpRoutedPortName
}
STATUS current
DESCRIPTION
"A routedPortIpChange notification is sent when the
ip address of the routed port has changed. "
::= { tplinkIpAddrNotifications 3 }
portChannelIpChange NOTIFICATION-TYPE
OBJECTS
{
tpPortChannelName
}
STATUS current
DESCRIPTION
"A portChannelIpChange notification is sent when the
ip address of the port channel has changed. "
::= { tplinkIpAddrNotifications 4 }
END
View Git Blame Copy Permalink