WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/rubytech/RUBYTECH-ES2310C-MIB

3897 lines
116 KiB
Plaintext
Raw Blame History

RUBYTECH-ES2310C-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString FROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
enterprises,MODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,Counter32,IpAddress FROM SNMPv2-SMI
ifIndex FROM RFC1213-MIB;
-- @ENTERPRISE-SECTION-START
rubytech MODULE-IDENTITY
LAST-UPDATED "200606160000Z"
ORGANIZATION "Ruby Tech Corp."
CONTACT-INFO
"2F, No.7, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan
Email: rubytech@mail.rubytech.com.tw
TEL: 886-2-2785-3961
FAX: 886-2-2786-3012"
DESCRIPTION
"The MIB module for Ruby Tech."
::= { enterprises 5205 }
switch OBJECT IDENTIFIER ::= { rubytech 2 }
es2310cProductID OBJECT IDENTIFIER ::= { switch 23 }
-- @ENTERPRISE-SECTION-END
es2310cProduces OBJECT IDENTIFIER ::= { es2310cProductID 1 }
es2310cSystem OBJECT IDENTIFIER ::= { es2310cProduces 1 }
es2310cCommonSys OBJECT IDENTIFIER ::= { es2310cSystem 1 }
es2310cReboot OBJECT-TYPE
SYNTAX INTEGER(0|1|2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"reboot the system. Get this oid always return zero.
0 - do nothing
1 - reboot without saving start
2 - reboot with saving start"
::= { es2310cCommonSys 1 }
es2310cBiosVsersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the BIOS version of the system."
::= { es2310cCommonSys 2 }
es2310cFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the firmware version of the system."
::= { es2310cCommonSys 3 }
es2310cHardwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the hardware version of the system."
::= { es2310cCommonSys 4 }
es2310cMechanicalVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the mechanical version of the system."
::= { es2310cCommonSys 5 }
es2310cSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the serial number of the system."
::= { es2310cCommonSys 6 }
es2310cHostMacAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the MAC address of the system."
::= { es2310cCommonSys 7 }
es2310cDevicePort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the quantity of ports that this system owns now."
::= { es2310cCommonSys 8 }
es2310cRamSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the RAM size of the system."
::= { es2310cCommonSys 9 }
es2310cFlashSize OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the flash size of the system."
::= { es2310cCommonSys 10 }
es2310cSystemDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the system description."
::= { es2310cCommonSys 11 }
es2310cDeviceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the device Name."
::= { es2310cCommonSys 12 }
es2310cIP OBJECT IDENTIFIER ::= { es2310cSystem 2 }
es2310cDhcpSetting OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set DHCP status of the system.
0 - DHCP disable
1 - DHCP enable"
::= { es2310cIP 1 }
es2310cIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the IP address of the system.
Can't Set this OID if DHCP status is enabled."
::= { es2310cIP 2 }
es2310cNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the netmask of the system.
Can't Set this OID if DHCP status is enabled."
::= { es2310cIP 3 }
es2310cDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the default gateway of the system.
Can't Set this OID if DHCP status is enabled."
::= { es2310cIP 4 }
es2310cDnsSetting OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the source of DNS server.
Can't Set this OID if DHCP status is disabled.
0 - manual, the DNS server is from manual setting
1 - auto, the DNS server is assigned by DHCP server."
::= { es2310cIP 5 }
es2310cDnsServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the DNS server of the system."
::= { es2310cIP 6 }
es2310cTime OBJECT IDENTIFIER ::= { es2310cSystem 3 }
es2310cSystemCurrentTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the current time in the system."
::= { es2310cTime 1 }
es2310cManualTimeSetting OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the system time of the device.
The input format is 'Year/Month/Day/Hour/Minute/Second'.
ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 .
value range:
Year : 2000 - 2036,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59,
sec : 0 - 59."
::= { es2310cTime 2 }
es2310cNTPServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the NTP Time Server. You can use the IP address or domain name."
::= { es2310cTime 3 }
es2310cNTPTimeZone OBJECT-TYPE
SYNTAX INTEGER(-12..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the NTP Time Zone.
value range is between -12 and 13
-12 - GMT -12:00,
-11 - GMT -11:00,
-10 - GMT -10:00,
-9 - GMT -09:00,
-8 - GMT -08:00,
-7 - GMT -07:00,
-6 - GMT -06:00,
-5 - GMT -05:00,
-4 - GMT -04:00,
-3 - GMT -03:00,
-2 - GMT -02:00,
-1 - GMT -01:00,
0 - GMT +00:00,
1 - GMT +01:00,
2 - GMT +02:00,
3 - GMT +03:00,
4 - GMT +04:00,
5 - GMT +05:00,
6 - GMT +06:00,
7 - GMT +07:00,
8 - GMT +08:00,
9 - GMT +09:00,
10 - GMT +10:00,
11 - GMT +11:00,
12 - GMT +12:00,
13 - GMT +13:00. "
::= { es2310cTime 4 }
es2310cNTPTimeSync OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sync time from NTP Server. Get this oid always return zero.
Setting the Time Server and Time Zone before doing time sync.
Notice that time server must be correct!
value range (1|0):
1 - sync.
0 - do nothing."
::= { es2310cTime 5 }
es2310cDaylightSavingTime OBJECT-TYPE
SYNTAX INTEGER(-5..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the daylight saving time.
value range is between -5 and 5. unit: hour. "
::= { es2310cTime 6 }
es2310cDaylightStartTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the Start time of Daylight Saving.
The input format is 'MM/DD/HH',
and daylight saving start month can't equal end month.
example: month/day/hour 10/01/00
month: 01~12, day: 01~31, hour: 00~23 ."
::= { es2310cTime 7 }
es2310cDaylightEndTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the End time of Daylight Saving.
The input format is 'MM/DD/HH',
and daylight saving start month can't equal end month.
example: month/day/hour 04/01/00
month: 01~12, day: 01~31, hour: 00~23 ."
::= { es2310cTime 8 }
es2310cAccount OBJECT IDENTIFIER ::= { es2310cSystem 4 }
es2310cAccountNumber OBJECT-TYPE
SYNTAX INTEGER(1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the current account number(s) of the system."
::= { es2310cAccount 1 }
es2310cAccountTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of es2310cAccountEntry. The number of entries are given by
the value of es2310cAccountNumber."
::= { es2310cAccount 2 }
es2310cAccountEntry OBJECT-TYPE
SYNTAX ES2310CAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for account information."
INDEX {es2310cAccountIndex}
::= { es2310cAccountTable 1 }
ES2310CAccountEntry ::=
SEQUENCE {
es2310cAccountIndex INTEGER,
es2310cAccountAuthorization DisplayString,
es2310cAccountName DisplayString,
es2310cAccountPassword DisplayString
}
es2310cAccountIndex OBJECT-TYPE
SYNTAX INTEGER(1..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the account entry."
::= { es2310cAccountEntry 1 }
es2310cAccountAuthorization OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authorization of the account entry."
::= { es2310cAccountEntry 2 }
es2310cAccountName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The username of the account entry."
::= { es2310cAccountEntry 3 }
es2310cAccountPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password of the account entry. The return value is always '********'."
::= { es2310cAccountEntry 4 }
es2310cAccountAddName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The account name for adding operation."
::= { es2310cAccount 3 }
es2310cAccountAddPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The account password for adding operation. The return value is always '********'."
::= { es2310cAccount 4 }
es2310cDoAccountAdd OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add account name. OID es2310cAccountAddName and es2310cAccountAddPassword must be
filled first. Get this oid always return zero.
1 - add account.
0 - do nothing."
::= { es2310cAccount 5 }
es2310cAccountDel OBJECT-TYPE
SYNTAX INTEGER(2..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delete account. The value is valid es2310cAccountIndex(Can't delete administrator)."
::= { es2310cAccount 6 }
es2310cSnmp OBJECT IDENTIFIER ::= { es2310cProduces 2 }
es2310cGetCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the get-community of the SNMP."
::= { es2310cSnmp 1 }
es2310cSetCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the set-community of the SNMP."
::= { es2310cSnmp 2 }
es2310cTrapHostNumber OBJECT-TYPE
SYNTAX INTEGER(1..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the number of trap hosts."
::= { es2310cSnmp 3 }
es2310cTrapHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of trap host entry. The number of entries are given by the value of es2310cTrapHostNumber."
::= { es2310cSnmp 4 }
es2310cTrapHostEntry OBJECT-TYPE
SYNTAX ES2310CTrapHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry information for trap host."
INDEX {es2310cTrapHostIndex}
::= { es2310cTrapHostTable 1 }
ES2310CTrapHostEntry ::=
SEQUENCE {
es2310cTrapHostIndex INTEGER,
es2310cTrapHostIP IpAddress,
es2310cTrapHostPort INTEGER,
es2310cTrapHostCommunity DisplayString
}
es2310cTrapHostIndex OBJECT-TYPE
SYNTAX INTEGER(1..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the trap host entry."
::= { es2310cTrapHostEntry 1 }
es2310cTrapHostIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP of the trap host."
::= { es2310cTrapHostEntry 2 }
es2310cTrapHostPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The receiving-port number of the trap host."
::= { es2310cTrapHostEntry 3 }
es2310cTrapHostCommunity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The community name for the trap PDU."
::= { es2310cTrapHostEntry 4 }
es2310cTrapBootDelayTime OBJECT-TYPE
SYNTAX INTEGER(0..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set trap boot delay time in second. Default: 0"
::= { es2310cSnmp 8 }
es2310cAlarm OBJECT IDENTIFIER ::= { es2310cProduces 3 }
es2310cEvent OBJECT IDENTIFIER ::= { es2310cAlarm 1 }
es2310cEventNumber OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the total number of alarm events."
::= { es2310cEvent 1 }
es2310cEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of alarm event entry. The number of entries are given by the value of es2310cEventNumber."
::= { es2310cEvent 2 }
es2310cEventEntry OBJECT-TYPE
SYNTAX ES2310CEventEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry information for alarm event."
INDEX {es2310cEventIndex}
::= { es2310cEventTable 1 }
ES2310CEventEntry ::=
SEQUENCE {
es2310cEventIndex INTEGER,
es2310cEventName DisplayString,
es2310cEventSendEmail INTEGER,
es2310cEventSendTrap INTEGER
}
es2310cEventIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the alarm event entry."
::= { es2310cEventEntry 1 }
es2310cEventName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm event name."
::= { es2310cEventEntry 2 }
es2310cEventSendEmail OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send email when alarm event is triggered."
::= { es2310cEventEntry 3 }
es2310cEventSendTrap OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Send trap when alarm event is triggered."
::= { es2310cEventEntry 4 }
es2310cEmail OBJECT IDENTIFIER ::= { es2310cAlarm 2 }
es2310cEmailServer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP server for alarm event."
::= { es2310cEmail 1 }
es2310cEmailUsername OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Username of smtp server."
::= { es2310cEmail 2 }
es2310cEmailPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"User password of smtp server."
::= { es2310cEmail 3 }
es2310cEmailSender OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the Sender of SMTP server."
::= {es2310cEmail 4 }
es2310cEmailReturnPath OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the return path of mail."
::= { es2310cEmail 5 }
es2310cEmailUserNumber OBJECT-TYPE
SYNTAX INTEGER(1..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of the email users that you want to send the alarm notification."
::= { es2310cEmail 6 }
es2310cEmailUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CEmailUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of email user entry. The number of entries are given by the value of es2310cEmailUserNumber."
::= { es2310cEmail 7 }
es2310cEmailUserEntry OBJECT-TYPE
SYNTAX ES2310CEmailUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry information for email user entry."
INDEX {es2310cEmailUserIndex}
::= { es2310cEmailUserTable 1 }
ES2310CEmailUserEntry ::=
SEQUENCE {
es2310cEmailUserIndex INTEGER,
es2310cEmailUserAddress DisplayString
}
es2310cEmailUserIndex OBJECT-TYPE
SYNTAX INTEGER(1..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the email user entry."
::= { es2310cEmailUserEntry 1 }
es2310cEmailUserAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The email address of the email user entry."
::= { es2310cEmailUserEntry 2 }
es2310cTftp OBJECT IDENTIFIER ::= { es2310cProduces 4 }
es2310cTftpServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the tftp server."
::= { es2310cTftp 1 }
es2310cConfiguration OBJECT IDENTIFIER ::= { es2310cProduces 5 }
es2310cSaveRestore OBJECT IDENTIFIER ::= { es2310cConfiguration 1 }
es2310cSaveStart OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Save current configuration into flash memory (start section).
Get this oid always return zero.
1 - save.
0 - do nothing. "
::= { es2310cSaveRestore 1 }
es2310cSaveUser OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Save current configuration into flash memory (user config section).
Get this oid always return zero.
1 - save.
0 - do nothing. "
::= { es2310cSaveRestore 2 }
es2310cRestoreDefault OBJECT-TYPE
SYNTAX INTEGER(0|1|2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Restore factory default configuration.
Get this oid always return zero.
2 - restore default included default ip address.
1 - restore default without changing current ip address.
0 - do nothing. "
::= { es2310cSaveRestore 3 }
es2310cRestoreUser OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Restore user configuration.
Get this oid always return zero.
1 - restore.
0 - do nothing. "
::= { es2310cSaveRestore 4 }
es2310cConfigFile OBJECT IDENTIFIER ::= { es2310cConfiguration 2 }
es2310cExportConfigName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set export config file path and name."
::= { es2310cConfigFile 1 }
es2310cDoExportConfig OBJECT-TYPE
SYNTAX INTEGER(1|2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do export-config.
Get this oid always return zero.
1 - export start section.
2 - export user-conf section."
::= { es2310cConfigFile 2 }
es2310cImportConfigName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set export config file path and name."
::= { es2310cConfigFile 3 }
es2310cDoImportConfig OBJECT-TYPE
SYNTAX INTEGER(1|2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do import-config.
Get this oid always return zero.
1 - import start section.
2 - import user-conf section."
::= { es2310cConfigFile 4 }
es2310cDiagnostic OBJECT IDENTIFIER ::= { es2310cProduces 6 }
es2310cEEPROMTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"EEPROM access test."
::= { es2310cDiagnostic 1 }
es2310cUartTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"UART access test."
::= { es2310cDiagnostic 2 }
es2310cDramTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DRAM access test."
::= { es2310cDiagnostic 3 }
es2310cFlashTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flash memory access test."
::= { es2310cDiagnostic 4 }
es2310cInternalLoopbackTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal loopback test."
::= { es2310cDiagnostic 5 }
es2310cExternalLoopbackTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External loopback test."
::= { es2310cDiagnostic 6 }
es2310cPingTest OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the host address that you want to ping and the system will return the test result."
::= { es2310cDiagnostic 7 }
es2310cLog OBJECT IDENTIFIER ::= { es2310cProduces 7 }
es2310cClearLog OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear system log.
Get this oid always return zero.
1 - clear log.
0 - do nothing. "
::= { es2310cLog 1 }
es2310cUploadLog OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Upload current system log. Set the correct tftp server first.
The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'.
Get this oid always return zero.
1 - upload log
0 - do nothing. "
::= { es2310cLog 2 }
es2310cAutoUploadLogState OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable log auto-upload function. Set the correct tftp server first.
The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'.
Get this oid always return zero.
1 - Enable auto-upload
0 - do nothing. "
::= { es2310cLog 3 }
es2310cLogNumber OBJECT-TYPE
SYNTAX INTEGER(0..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the number of current system log. "
::= { es2310cLog 4 }
es2310cLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of log entry. The number of entries are given by the value of es2310cLogNumber."
::= { es2310cLog 5 }
es2310cLogEntry OBJECT-TYPE
SYNTAX ES2310CLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry information for system log."
INDEX {es2310cLogIndex}
::= { es2310cLogTable 1 }
ES2310CLogEntry ::=
SEQUENCE {
es2310cLogIndex INTEGER,
es2310cLogEvent DisplayString
}
es2310cLogIndex OBJECT-TYPE
SYNTAX INTEGER(1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the log entry."
::= { es2310cLogEntry 1 }
es2310cLogEvent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The detail information of the log entry."
::= { es2310cLogEntry 2 }
es2310cFirmware OBJECT IDENTIFIER ::= { es2310cProduces 8 }
es2310cFirmwareFileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the path and filename for firmware upgrading."
::= { es2310cFirmware 1 }
es2310cDoFirmwareUpgrade OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Do firmware upgrade. Get this oid always return zero.
1 - do firmware upgrade.
0 - do nothing."
::= { es2310cFirmware 2 }
es2310cPort OBJECT IDENTIFIER ::= { es2310cProduces 9 }
es2310cPortStatus OBJECT IDENTIFIER ::= { es2310cPort 1 }
es2310cPortStatusNumber OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the number of port state."
::= { es2310cPortStatus 1 }
es2310cPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port status entry. The number of entries are given by the value of es2310cPortStatusNumber."
::= { es2310cPortStatus 2 }
es2310cPortStatusEntry OBJECT-TYPE
SYNTAX ES2310CPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for port status information."
INDEX {es2310cPortStatusIndex}
::= { es2310cPortStatusTable 1 }
ES2310CPortStatusEntry ::=
SEQUENCE {
es2310cPortStatusIndex INTEGER,
es2310cPortStatusMedia DisplayString,
es2310cPortStatusLink DisplayString,
es2310cPortStatusPortState DisplayString,
es2310cPortStatusAutoNego DisplayString,
es2310cPortStatusSpdDpx DisplayString,
es2310cPortStatusRxPause DisplayString,
es2310cPortStatusTxPause DisplayString,
es2310cPortStatusDescription DisplayString
}
es2310cPortStatusIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port status entry."
::= { es2310cPortStatusEntry 1 }
es2310cPortStatusMedia OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port media type of the port status entry."
::= { es2310cPortStatusEntry 2 }
es2310cPortStatusLink OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port link of the port status entry."
::= { es2310cPortStatusEntry 3 }
es2310cPortStatusPortState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port state of the port status entry."
::= { es2310cPortStatusEntry 4 }
es2310cPortStatusAutoNego OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The auto negotiation of the port status entry."
::= { es2310cPortStatusEntry 5 }
es2310cPortStatusSpdDpx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The speed/duplex of the port status entry."
::= { es2310cPortStatusEntry 6 }
es2310cPortStatusRxPause OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Rx Pause of the port status entry."
::= { es2310cPortStatusEntry 7 }
es2310cPortStatusTxPause OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Tx Pause of the port status entry."
::= { es2310cPortStatusEntry 8 }
es2310cPortStatusDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of port."
::= { es2310cPortStatusEntry 9 }
es2310cPortConf OBJECT IDENTIFIER ::= { es2310cPort 2 }
es2310cPortConfNumber OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the number of port configuration."
::= { es2310cPortConf 1 }
es2310cPortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of port configuration entry. The number of entries are given by the value of es2310cPortConfNumber."
::= { es2310cPortConf 2 }
es2310cPortConfEntry OBJECT-TYPE
SYNTAX ES2310CPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for port configuration information."
INDEX {es2310cPortConfIndex}
::= { es2310cPortConfTable 1 }
ES2310CPortConfEntry ::=
SEQUENCE {
es2310cPortConfIndex INTEGER,
es2310cPortConfPortState INTEGER,
es2310cPortConfSpdDpx INTEGER,
es2310cPortConfFlwCtrl INTEGER,
es2310cPortConfDescription DisplayString
}
es2310cPortConfIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port configuration entry."
::= { es2310cPortConfEntry 1 }
es2310cPortConfPortState OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port state of the port configuration entry.
0 - disabled.
1 - enabled. "
::= { es2310cPortConfEntry 2 }
es2310cPortConfSpdDpx OBJECT-TYPE
SYNTAX INTEGER(0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The speed/duplex of the port configuration entry.
0 - auto.
1 - 10M/Half.
2 - 10M/Full.
3 - 100M/Half.
4 - 100M/Full.
5 - 1G/Full. "
::= { es2310cPortConfEntry 3 }
es2310cPortConfFlwCtrl OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flow control of the port configuration entry.
0 - asymmetric.
1 - symmetric. "
::= { es2310cPortConfEntry 4 }
es2310cPortConfDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The description of port."
::= { es2310cPortConfEntry 5 }
es2310cPortBandwidth OBJECT IDENTIFIER ::= { es2310cPort 3 }
es2310cPortBandwidthTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CPortBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of port bandwidth entry."
::= { es2310cPortBandwidth 1 }
ES2310CPortBandwidthEntry ::=
SEQUENCE {
es2310cPortBandwidthIndex INTEGER,
es2310cPortBandwidthIngressRate INTEGER,
es2310cPortBandwidthEgressRate INTEGER
}
es2310cPortBandwidthEntry OBJECT-TYPE
SYNTAX ES2310CPortBandwidthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the Entry(s) for port bandwidth configuration."
INDEX {es2310cPortBandwidthIndex}
::= { es2310cPortBandwidthTable 1 }
es2310cPortBandwidthIndex OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the index of the port bandwidth entry."
::= { es2310cPortBandwidthEntry 1 }
es2310cPortBandwidthIngressRate OBJECT-TYPE
SYNTAX INTEGER(66..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the port bandwidth ingress rate.
Fast Ethernet port range: 66~102400(Kb)
Gigabit Ethernet port range: 66~1024000(Kb)"
::= { es2310cPortBandwidthEntry 2 }
es2310cPortBandwidthEgressRate OBJECT-TYPE
SYNTAX INTEGER(66..1024000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Get/Set the port bandwidth egress rate.
Fast Ethernet port range: 66~102400(Kb)
Gigabit Ethernet port range: 66~1024000(Kb)"
::= { es2310cPortBandwidthEntry 3 }
es2310cPortBandwidthStormType OBJECT-TYPE
SYNTAX INTEGER(0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the bandwidth storm type.
0:Disable
1:Broadcast Storm Control
2:Multicast Storm Control
3:Unknown Unicast Storm Control
4:Broadcast, Multicast, and Unknown Unicast Storm Control"
::= { es2310cPortBandwidth 2 }
es2310cPortBandwidthStormRate OBJECT-TYPE
SYNTAX INTEGER(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the storm rate."
::= { es2310cPortBandwidth 3 }
es2310cPortSFPInfo OBJECT IDENTIFIER ::= { es2310cPort 4 }
es2310cPortSFPInfoNumber OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the number of sfp info entry."
::= { es2310cPortSFPInfo 1 }
es2310cPortSFPInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CPORTSFPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of sfp info entry. The numbers of entries are given by the value of es2310cPortSFPInfoNumber."
::= { es2310cPortSFPInfo 2 }
ES2310CPORTSFPInfoEntry ::=
SEQUENCE {
es2310cPortSFPInfoIndex INTEGER,
es2310cPortSFPConnectorType DisplayString,
es2310cPortSFPFiberType DisplayString,
es2310cPortSFPWavelength DisplayString,
es2310cPortSFPBaudRate DisplayString,
es2310cPortSFPVendorOUI DisplayString,
es2310cPortSFPVendorName DisplayString,
es2310cPortSFPVendorPN DisplayString,
es2310cPortSFPVendorRev DisplayString,
es2310cPortSFPVendorSN DisplayString,
es2310cPortSFPDateCode DisplayString,
es2310cPortSFPTemperature DisplayString,
es2310cPortSFPVcc DisplayString,
es2310cPortSFPTxBias DisplayString,
es2310cPortSFPTxPWR DisplayString,
es2310cPortSFPRxPWR DisplayString
}
es2310cPortSFPInfoEntry OBJECT-TYPE
SYNTAX ES2310CPORTSFPInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for SFP information."
INDEX {es2310cPortSFPInfoIndex}
::= { es2310cPortSFPInfoTable 1 }
es2310cPortSFPInfoIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the sfp info entry."
::= { es2310cPortSFPInfoEntry 1 }
es2310cPortSFPConnectorType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get connector type of the sfp."
::= { es2310cPortSFPInfoEntry 2 }
es2310cPortSFPFiberType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get fiber type of the sfp."
::= { es2310cPortSFPInfoEntry 3 }
es2310cPortSFPWavelength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get tx central wavelength of the sfp."
::= { es2310cPortSFPInfoEntry 4 }
es2310cPortSFPBaudRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get baud rate of the sfp."
::= { es2310cPortSFPInfoEntry 5 }
es2310cPortSFPVendorOUI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get vendor OUI of the sfp."
::= { es2310cPortSFPInfoEntry 6 }
es2310cPortSFPVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get vendor name of the sfp."
::= { es2310cPortSFPInfoEntry 7 }
es2310cPortSFPVendorPN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get vendor part number of the sfp."
::= { es2310cPortSFPInfoEntry 8 }
es2310cPortSFPVendorRev OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get vendor revision number of the sfp."
::= { es2310cPortSFPInfoEntry 9 }
es2310cPortSFPVendorSN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get vendor serial number of the sfp."
::= { es2310cPortSFPInfoEntry 10 }
es2310cPortSFPDateCode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get data code of the sfp."
::= { es2310cPortSFPInfoEntry 11 }
es2310cPortSFPTemperature OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get current temperature of the sfp."
::= { es2310cPortSFPInfoEntry 12 }
es2310cPortSFPVcc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get current internal supply voltage of the sfp."
::= { es2310cPortSFPInfoEntry 13 }
es2310cPortSFPTxBias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get current TX Bias of the sfp."
::= { es2310cPortSFPInfoEntry 14 }
es2310cPortSFPTxPWR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get current TX output power of the sfp."
::= { es2310cPortSFPInfoEntry 15 }
es2310cPortSFPRxPWR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get current Received Power of the sfp."
::= { es2310cPortSFPInfoEntry 16 }
es2310cLoopDetectedConf OBJECT IDENTIFIER ::= { es2310cProduces 10 }
es2310cLoopDetectedNumber OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Get the number of loop detected entry."
::= { es2310cLoopDetectedConf 1 }
es2310cLoopDetectedTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CLoopDetectedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of loop detected entry. The number of entries are given by the value of es2310cLoopDetectedNumber."
::= { es2310cLoopDetectedConf 2 }
es2310cLoopDetectedEntry OBJECT-TYPE
SYNTAX ES2310CLoopDetectedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for loop detected information."
INDEX {es2310cLoopDetectedfIndex}
::= { es2310cLoopDetectedTable 1 }
ES2310CLoopDetectedEntry ::=
SEQUENCE {
es2310cLoopDetectedfIndex INTEGER,
es2310cLoopDetectedStateEbl INTEGER,
es2310cLoopDetectedCurrentStatus INTEGER,
es2310cLoopDetectedResumed INTEGER
}
es2310cLoopDetectedfIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the loop detected entry."
::= { es2310cLoopDetectedEntry 1 }
es2310cLoopDetectedStateEbl OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the loop detected entry.
0 - disabled.
1 - enabled. "
::= { es2310cLoopDetectedEntry 2 }
es2310cLoopDetectedCurrentStatus OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the loop detected port.
0 - unlocked
1 - locked due to the loop condition "
::= { es2310cLoopDetectedEntry 3 }
es2310cLoopDetectedResumed OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"unlock the port which is locked due to loop condition. Get this oid always return zero.
1 - unlock the port,
0 - do nothing"
::= { es2310cLoopDetectedEntry 4 }
es2310cLoopDetectedAction OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the corresponding action while loop is detected.
1 - locked the loop port,
0 - do nothing."
::= { es2310cLoopDetectedConf 3 }
es2310cMacTableInfo OBJECT IDENTIFIER ::= { es2310cProduces 11 }
es2310cMacTableMaintenance OBJECT IDENTIFIER ::= { es2310cMacTableInfo 1 }
es2310cMacTableAgingTime OBJECT-TYPE
SYNTAX INTEGER(0|10..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the Mac Table Aging Time (10~1000000 Secs).
0 : Disable.
"
::= { es2310cMacTableMaintenance 1 }
es2310cMacTableFlush OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"1 : Flush Mac Table."
::= { es2310cMacTableMaintenance 2 }
es2310cMacTableLearnPortLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CMacTableLearnPortLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of MAC Learning Limitentry."
::= { es2310cMacTableMaintenance 3 }
ES2310CMacTableLearnPortLimitEntry ::=
SEQUENCE {
es2310cMacTableLearnPortLimitIndex INTEGER,
es2310cMacTableLearnPortLimit INTEGER
}
es2310cMacTableLearnPortLimitEntry OBJECT-TYPE
SYNTAX ES2310CMacTableLearnPortLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for Mac Table Port Learning Limit."
INDEX {es2310cMacTableLearnPortLimitIndex}
::= { es2310cMacTableLearnPortLimitTable 1 }
es2310cMacTableLearnPortLimitIndex OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the Mac Table Learning Limit entry."
::= { es2310cMacTableLearnPortLimitEntry 1 }
es2310cMacTableLearnPortLimit OBJECT-TYPE
SYNTAX INTEGER(0..8191)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port Learning Limit (0~8191)."
::= { es2310cMacTableLearnPortLimitEntry 2 }
es2310cMacTableStaticMac OBJECT IDENTIFIER ::= { es2310cMacTableInfo 3 }
es2310cMacTableStaticMacNumber OBJECT-TYPE
SYNTAX INTEGER(0..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is number of static Mac table entry"
::= { es2310cMacTableStaticMac 1 }
es2310cMacTableStaticMacEntryCreate OBJECT-TYPE
SYNTAX INTEGER(0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Creat a static mac entry.
Set 1: add a new entry,
Get: the number means index."
::= { es2310cMacTableStaticMac 2 }
es2310cMacTableStaticMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CMacTableStaticMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of static MAC table."
::= { es2310cMacTableStaticMac 3 }
ES2310CMacTableStaticMacEntry ::=
SEQUENCE {
es2310cMacTableStaticMacIndex INTEGER,
es2310cMacTableStaticMacAddress DisplayString,
es2310cMacTableStaticMacVid INTEGER,
es2310cMacTableStaticMacQueue INTEGER,
es2310cMacTableStaticMacFwRule INTEGER,
es2310cMacTableStaticMacPort INTEGER,
es2310cMacTableStaticMacEntryAction INTEGER
}
es2310cMacTableStaticMacEntry OBJECT-TYPE
SYNTAX ES2310CMacTableStaticMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for Static Mac Table."
INDEX {es2310cMacTableStaticMacIndex}
::= { es2310cMacTableStaticMacTable 1 }
es2310cMacTableStaticMacIndex OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the static Mac Table."
::= { es2310cMacTableStaticMacEntry 1 }
es2310cMacTableStaticMacAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mac address of the static mac table entry."
::= { es2310cMacTableStaticMacEntry 2 }
es2310cMacTableStaticMacVid OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan id of the static mac table entry."
::= { es2310cMacTableStaticMacEntry 3 }
es2310cMacTableStaticMacQueue OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queue of the static mac table entry."
::= { es2310cMacTableStaticMacEntry 4 }
es2310cMacTableStaticMacFwRule OBJECT-TYPE
SYNTAX INTEGER(0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The forwarding rule of the static mac table entry.
0 : static
1 : Static with Destination Drop
2 : Static with Source Drop
"
::= { es2310cMacTableStaticMacEntry 5 }
es2310cMacTableStaticMacPort OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port of the static mac table entry."
::= { es2310cMacTableStaticMacEntry 6 }
es2310cMacTableStaticMacEntryAction OBJECT-TYPE
SYNTAX INTEGER(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action of the static mac table entry.
1:action
2:non-action
3:delete"
::= { es2310cMacTableStaticMacEntry 7 }
es2310cMacTableMacAlias OBJECT IDENTIFIER ::= { es2310cMacTableInfo 4 }
es2310cMacTableMacAliasNumber OBJECT-TYPE
SYNTAX INTEGER(0..8192)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is number of static Mac table entry"
::= { es2310cMacTableMacAlias 1 }
es2310cMacTableMacAliasEntryCreate OBJECT-TYPE
SYNTAX INTEGER(0..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Creat a static mac alias entry.
Set 1: add a new entry,
Get: the number means index."
::= { es2310cMacTableMacAlias 2 }
es2310cMacTableMacAliasTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CMacTableMacAliasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of MAC Alias table."
::= { es2310cMacTableMacAlias 3 }
ES2310CMacTableMacAliasEntry ::=
SEQUENCE {
es2310cMacTableMacAliasIndex INTEGER,
es2310cMacTableMacAliasAddress DisplayString,
es2310cMacTableMacAliasAlias DisplayString,
es2310cMacTableMacAliasEntryAction INTEGER
}
es2310cMacTableMacAliasEntry OBJECT-TYPE
SYNTAX ES2310CMacTableMacAliasEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for Alias Mac Table."
INDEX {es2310cMacTableMacAliasIndex}
::= { es2310cMacTableMacAliasTable 1 }
es2310cMacTableMacAliasIndex OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the Alias Mac Table."
::= { es2310cMacTableMacAliasEntry 1 }
es2310cMacTableMacAliasAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mac address of the Alias Mac Table."
::= { es2310cMacTableMacAliasEntry 2 }
es2310cMacTableMacAliasAlias OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mac Alias of the Alias Mac Table."
::= { es2310cMacTableMacAliasEntry 3 }
es2310cMacTableMacAliasEntryAction OBJECT-TYPE
SYNTAX INTEGER(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action of the alias mac table entry.
1:action
2:non-action
3:delete"
::= { es2310cMacTableMacAliasEntry 4 }
es2310cGVRPInfo OBJECT IDENTIFIER ::= { es2310cProduces 12 }
es2310cGvrpConf OBJECT IDENTIFIER ::= { es2310cGVRPInfo 1 }
es2310cGvrpConfState OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of GVRP.
0 - Disable
1 - Enable
"
::= { es2310cGvrpConf 1 }
es2310cGvrpConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CGvrpConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the GVRP conf table."
::= { es2310cGvrpConf 2 }
ES2310CGvrpConfEntry ::=
SEQUENCE {
es2310cGvrpConfIndex INTEGER,
es2310cGvrpConfJoinTime INTEGER,
es2310cGvrpConfLeaveTime INTEGER,
es2310cGvrpConfLeaveAllTime INTEGER,
es2310cGvrpConfDefaultAppMode INTEGER,
es2310cGvrpConfDefaultRegMode INTEGER,
es2310cGvrpConfRestrictedMode INTEGER
}
es2310cGvrpConfEntry OBJECT-TYPE
SYNTAX ES2310CGvrpConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for the GVRP conf table."
INDEX {es2310cGvrpConfIndex}
::= { es2310cGvrpConfTable 1 }
es2310cGvrpConfIndex OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the GVRP conf table."
::= { es2310cGvrpConfEntry 1 }
es2310cGvrpConfJoinTime OBJECT-TYPE
SYNTAX INTEGER(20..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The join time of the GVRP entry.
range: 20~100
default 20 centisecond"
::= { es2310cGvrpConfEntry 2 }
es2310cGvrpConfLeaveTime OBJECT-TYPE
SYNTAX INTEGER(60..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The leave time of the GVRP entry.
range: 60~300
default:60 centisecond"
::= { es2310cGvrpConfEntry 3 }
es2310cGvrpConfLeaveAllTime OBJECT-TYPE
SYNTAX INTEGER(1000..5000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The leave all time of the GVRP entry.
range: 1000~5000
default: 1000 unit time"
::= { es2310cGvrpConfEntry 4 }
es2310cGvrpConfDefaultAppMode OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default application mode of the GVRP entry.
0 - Normal
1 - Non-Participant
default: Normal"
::= { es2310cGvrpConfEntry 5 }
es2310cGvrpConfDefaultRegMode OBJECT-TYPE
SYNTAX INTEGER(0|1|2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default registrar mode of the GVRP entry.
0 - Normal
1 - Fixed
2 - Forbidden
default: Normal"
::= { es2310cGvrpConfEntry 6 }
es2310cGvrpConfRestrictedMode OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The restricted mode of the GVRP entry.
0 - Disable
1 - Enable
default: Disable"
::= { es2310cGvrpConfEntry 7 }
es2310cGvrpCounter OBJECT IDENTIFIER ::= { es2310cGVRPInfo 2 }
es2310cGvrpCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CGvrpCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the GVRP counter table."
::= { es2310cGvrpCounter 1 }
ES2310CGvrpCounterEntry ::=
SEQUENCE {
es2310cGvrpCounterIndex INTEGER,
es2310cGvrpCounterRxTotalGvrpPkts Counter32,
es2310cGvrpCounterRxInvalidGvrpPkts Counter32,
es2310cGvrpCounterRxLeaveAllMsg Counter32,
es2310cGvrpCounterRxJoinEmptyMsg Counter32,
es2310cGvrpCounterRxJoinInMsg Counter32,
es2310cGvrpCounterRxLeaveEmptyMsg Counter32,
es2310cGvrpCounterRxEmptyMsg Counter32,
es2310cGvrpCounterTxTotalGvrpPkts Counter32,
es2310cGvrpCounterTxLeaveAllMsg Counter32,
es2310cGvrpCounterTxJoinEmptyMsg Counter32,
es2310cGvrpCounterTxJoinInMsg Counter32,
es2310cGvrpCounterTxLeaveEmptyMsg Counter32,
es2310cGvrpCounterTxEmptyMsg Counter32
}
es2310cGvrpCounterEntry OBJECT-TYPE
SYNTAX ES2310CGvrpCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for the GVRP counter table."
INDEX {es2310cGvrpCounterIndex}
::= { es2310cGvrpCounterTable 1 }
es2310cGvrpCounterIndex OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port index of the GVRP counter table."
::= { es2310cGvrpCounterEntry 1 }
es2310cGvrpCounterRxTotalGvrpPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Rx Total GVRP packet counters."
::= { es2310cGvrpCounterEntry 2 }
es2310cGvrpCounterRxInvalidGvrpPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Rx Invalid GVRP packet counters."
::= { es2310cGvrpCounterEntry 3 }
es2310cGvrpCounterRxLeaveAllMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Rx LeaveAll message packet counters."
::= { es2310cGvrpCounterEntry 4 }
es2310cGvrpCounterRxJoinEmptyMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Rx JoinEmpty message packet counters."
::= { es2310cGvrpCounterEntry 5 }
es2310cGvrpCounterRxJoinInMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Rx JoinIn message packet counters."
::= { es2310cGvrpCounterEntry 6 }
es2310cGvrpCounterRxLeaveEmptyMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Rx LeaveEmpty message packet counters."
::= { es2310cGvrpCounterEntry 7 }
es2310cGvrpCounterRxEmptyMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Rx Empty message packet counters."
::= { es2310cGvrpCounterEntry 8 }
es2310cGvrpCounterTxTotalGvrpPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Tx Total GVRP packet counters."
::= { es2310cGvrpCounterEntry 9 }
es2310cGvrpCounterTxLeaveAllMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Tx LeaveAll message packet counters."
::= { es2310cGvrpCounterEntry 10 }
es2310cGvrpCounterTxJoinEmptyMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Tx JoinEmpty message packet counters."
::= { es2310cGvrpCounterEntry 11 }
es2310cGvrpCounterTxJoinInMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Tx JoinIn message packet counters."
::= { es2310cGvrpCounterEntry 12 }
es2310cGvrpCounterTxLeaveEmptyMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Tx LeaveEmpty message packet counters."
::= { es2310cGvrpCounterEntry 13 }
es2310cGvrpCounterTxEmptyMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is Tx Empty message packet counters."
::= { es2310cGvrpCounterEntry 14 }
es2310cGvrpGroup OBJECT IDENTIFIER ::= { es2310cGVRPInfo 3 }
es2310cGvrpGroupNumber OBJECT-TYPE
SYNTAX INTEGER(0..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is number of the GVRP group table entry."
::= { es2310cGvrpGroup 1 }
es2310cGvrpGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CGvrpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the GVRP group table."
::= { es2310cGvrpGroup 2 }
ES2310CGvrpGroupEntry ::=
SEQUENCE {
es2310cGvrpGroupId INTEGER,
es2310cGvrpGroupVid INTEGER,
es2310cGvrpGroupMemberPort DisplayString
}
es2310cGvrpGroupEntry OBJECT-TYPE
SYNTAX ES2310CGvrpGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for the GVRP group table."
INDEX {es2310cGvrpGroupId}
::= { es2310cGvrpGroupTable 1 }
es2310cGvrpGroupId OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the GVRP group table."
::= { es2310cGvrpGroupEntry 1 }
es2310cGvrpGroupVid OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is vid of GVRP group."
::= { es2310cGvrpGroupEntry 2 }
es2310cGvrpGroupMemberPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the member port of GVRP group."
::= { es2310cGvrpGroupEntry 3 }
es2310cSecurity OBJECT IDENTIFIER ::= { es2310cProduces 13 }
es2310cIsolatedPortGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is isolated group.
0: Disable"
::= { es2310cSecurity 1 }
es2310cMirror OBJECT IDENTIFIER ::= { es2310cSecurity 2 }
es2310cMirrorMode OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is mirror mode.
0 - Disable
1 - Enable
"
::= { es2310cMirror 1 }
es2310cMonitoringPort OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is monitoring port."
::= { es2310cMirror 2 }
es2310cMonitoredIngressPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is monitored ingress ports."
::= { es2310cMirror 3 }
es2310cMonitoredEgressPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is monitored egress ports."
::= { es2310cMirror 4 }
es2310cVirtualStack OBJECT IDENTIFIER ::= { es2310cProduces 14 }
es2310cVirtualStackState OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the Virtual Stack State.
0 : disable,
1 : enable
"
::= { es2310cVirtualStack 1 }
es2310cVirtualStackRole OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the Virtual Stack Role.
0 : slave,
1 : master
"
::= { es2310cVirtualStack 2 }
es2310cVirtualStackGroupID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the Virtual Stack Group ID."
::= { es2310cVirtualStack 3 }
es2310cManagementSecurity OBJECT IDENTIFIER ::= { es2310cProduces 15 }
es2310cManagementSecurityNumber OBJECT-TYPE
SYNTAX INTEGER(0..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is number of the management security table entry."
::= { es2310cManagementSecurity 1 }
es2310cManagementSecurityEntryCreate OBJECT-TYPE
SYNTAX INTEGER(0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Creat a management security entry.
Set 1: add a new entry,
Get: the number means index."
::= { es2310cManagementSecurity 2 }
es2310cManagementSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CManagementSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the management security table."
::= { es2310cManagementSecurity 3 }
ES2310CManagementSecurityEntry ::=
SEQUENCE {
es2310cManagementSecurityIndex INTEGER,
es2310cManagementSecurityName DisplayString,
es2310cManagementSecurityVid INTEGER,
es2310cManagementSecurityIpRange DisplayString,
es2310cManagementSecurityIncomigPort DisplayString,
es2310cManagementSecurityAccessType DisplayString,
es2310cManagementSecurityAction INTEGER,
es2310cManagementSecurityEntryAction INTEGER
}
es2310cManagementSecurityEntry OBJECT-TYPE
SYNTAX ES2310CManagementSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for the management security table."
INDEX {es2310cManagementSecurityIndex}
::= { es2310cManagementSecurityTable 1 }
es2310cManagementSecurityIndex OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the management security table."
::= { es2310cManagementSecurityEntry 1 }
es2310cManagementSecurityName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the management security entry."
::= { es2310cManagementSecurityEntry 2 }
es2310cManagementSecurityVid OBJECT-TYPE
SYNTAX INTEGER(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the vid of the management security entry.
0: any VID."
::= { es2310cManagementSecurityEntry 3 }
es2310cManagementSecurityIpRange OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the IP range of the management security entry.
0: any IP."
::= { es2310cManagementSecurityEntry 4 }
es2310cManagementSecurityIncomigPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the ports of the management security entry.
0: any incoming port."
::= { es2310cManagementSecurityEntry 5 }
es2310cManagementSecurityAccessType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the access type of the management security entry.
for example: http,snmp,telnet
for example: http,telnet
for example: any
any means http,snmp and telnet."
::= { es2310cManagementSecurityEntry 6 }
es2310cManagementSecurityAction OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the action of the management security entry.
0:deny
1:accept"
::= { es2310cManagementSecurityEntry 7 }
es2310cManagementSecurityEntryAction OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action the management security entry.
1:action
2:non-action
3:delete"
::= { es2310cManagementSecurityEntry 8 }
es2310cQoS OBJECT IDENTIFIER ::= { es2310cProduces 16 }
es2310cQoSGlobalConfig OBJECT IDENTIFIER ::= { es2310cQoS 1 }
es2310cQoSMode OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of QoS.
0 - Disable
1 - Enable
"
::= { es2310cQoSGlobalConfig 1 }
es2310cQosPriorityControl1p OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the priority control for 802.1p.
0 - Disable
1 - Enable
"
::= { es2310cQoSGlobalConfig 2 }
es2310cQosPriorityControlTOS OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the priority control for TOS.
0 - Disable
1 - Enable
"
::= { es2310cQoSGlobalConfig 3 }
es2310cQosPriorityControlDSCP OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the priority control for DSCP.
0 - Disable
1 - Enable
"
::= { es2310cQoSGlobalConfig 4 }
es2310cQoSSchedulingMethod OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the scheduling method.
0 - WRR
1 - Strict
"
::= { es2310cQoSGlobalConfig 5 }
es2310cQoSWeightQ0 OBJECT-TYPE
SYNTAX INTEGER(1..55)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the weigtht of Queue0."
::= { es2310cQoSGlobalConfig 6 }
es2310cQoSWeightQ1 OBJECT-TYPE
SYNTAX INTEGER(1..55)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the weigtht of Queue1."
::= { es2310cQoSGlobalConfig 7 }
es2310cQoSWeightQ2 OBJECT-TYPE
SYNTAX INTEGER(1..55)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the weigtht of Queue2."
::= { es2310cQoSGlobalConfig 8 }
es2310cQoSWeightQ3 OBJECT-TYPE
SYNTAX INTEGER(1..55)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the weigtht of Queue3."
::= { es2310cQoSGlobalConfig 9 }
es2310cQoSVIPPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the VIP group for QoS."
::= { es2310cQoS 2 }
es2310cQoS1pPriority OBJECT IDENTIFIER ::= { es2310cQoS 3 }
es2310cQoS1pPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CQoS1pPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the 802.1p."
::= { es2310cQoS1pPriority 1 }
ES2310CQoS1pPriorityEntry ::=
SEQUENCE {
es2310cQoS1pPriorityIndex INTEGER,
es2310cQoS1pPriorityValue INTEGER,
es2310cQoS1pPriorityQueue INTEGER
}
es2310cQoS1pPriorityEntry OBJECT-TYPE
SYNTAX ES2310CQoS1pPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for the 802.1p priority table."
INDEX {es2310cQoS1pPriorityIndex}
::= { es2310cQoS1pPriorityTable 1 }
es2310cQoS1pPriorityIndex OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the 802.1p priority table."
::= { es2310cQoS1pPriorityEntry 1 }
es2310cQoS1pPriorityValue OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of 802.1p priority entry."
::= { es2310cQoS1pPriorityEntry 2 }
es2310cQoS1pPriorityQueue OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queue of 802.1p priority entry."
::= { es2310cQoS1pPriorityEntry 3 }
es2310cQoSDTypeTOSPriority OBJECT IDENTIFIER ::= { es2310cQoS 4 }
es2310cQoSDTypeTOSPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CQoSDTypeTOSPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the TOS delay priority mapping entry."
::= { es2310cQoSDTypeTOSPriority 1 }
ES2310CQoSDTypeTOSPriorityEntry ::=
SEQUENCE {
es2310cQoSDTypeTOSPriorityIndex INTEGER,
es2310cQoSDTypeTOSPriorityValue INTEGER,
es2310cQoSDTypeTOSPriorityQueue INTEGER
}
es2310cQoSDTypeTOSPriorityEntry OBJECT-TYPE
SYNTAX ES2310CQoSDTypeTOSPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for the ToS delay priority mapping entry."
INDEX {es2310cQoSDTypeTOSPriorityIndex}
::= { es2310cQoSDTypeTOSPriorityTable 1 }
es2310cQoSDTypeTOSPriorityIndex OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the ToS delay priority mapping table."
::= { es2310cQoSDTypeTOSPriorityEntry 1 }
es2310cQoSDTypeTOSPriorityValue OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ToS delay priority mapping entry."
::= { es2310cQoSDTypeTOSPriorityEntry 2 }
es2310cQoSDTypeTOSPriorityQueue OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queue of ToS delay priority mapping entry."
::= { es2310cQoSDTypeTOSPriorityEntry 3 }
es2310cQoSTTypeTOSPriority OBJECT IDENTIFIER ::= { es2310cQoS 5 }
es2310cQoSTTypeTOSPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CQoSTTypeTOSPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the ToS throughput priority mapping entry."
::= { es2310cQoSTTypeTOSPriority 1 }
ES2310CQoSTTypeTOSPriorityEntry ::=
SEQUENCE {
es2310cQoSTTypeTOSPriorityIndex INTEGER,
es2310cQoSTTypeTOSPriorityValue INTEGER,
es2310cQoSTTypeTOSPriorityQueue INTEGER
}
es2310cQoSTTypeTOSPriorityEntry OBJECT-TYPE
SYNTAX ES2310CQoSTTypeTOSPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for the TOS Throughput mapping entry."
INDEX {es2310cQoSTTypeTOSPriorityIndex}
::= { es2310cQoSTTypeTOSPriorityTable 1 }
es2310cQoSTTypeTOSPriorityIndex OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the TOS throughput priority mapping table."
::= { es2310cQoSTTypeTOSPriorityEntry 1 }
es2310cQoSTTypeTOSPriorityValue OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of TOS throughput priority mapping entry."
::= { es2310cQoSTTypeTOSPriorityEntry 2 }
es2310cQoSTTypeTOSPriorityQueue OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queue of TOS throughput priority mapping entry."
::= { es2310cQoSTTypeTOSPriorityEntry 3 }
es2310cQoSRTypeTOSPriority OBJECT IDENTIFIER ::= { es2310cQoS 6 }
es2310cQoSRTypeTOSPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CQoSRTypeTOSPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the ToS reliability priority mapping entry."
::= { es2310cQoSRTypeTOSPriority 1 }
ES2310CQoSRTypeTOSPriorityEntry ::=
SEQUENCE {
es2310cQoSRTypeTOSPriorityIndex INTEGER,
es2310cQoSRTypeTOSPriorityValue INTEGER,
es2310cQoSRTypeTOSPriorityQueue INTEGER
}
es2310cQoSRTypeTOSPriorityEntry OBJECT-TYPE
SYNTAX ES2310CQoSRTypeTOSPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for the TOS reliability mapping entry."
INDEX {es2310cQoSRTypeTOSPriorityIndex}
::= { es2310cQoSRTypeTOSPriorityTable 1 }
es2310cQoSRTypeTOSPriorityIndex OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the TOS reliability priority mapping table."
::= { es2310cQoSRTypeTOSPriorityEntry 1 }
es2310cQoSRTypeTOSPriorityValue OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of TOS reliability priority mapping entry."
::= { es2310cQoSRTypeTOSPriorityEntry 2 }
es2310cQoSRTypeTOSPriorityQueue OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queue of TOS reliability priority mapping entry."
::= { es2310cQoSRTypeTOSPriorityEntry 3 }
es2310cQoSMTypeTOSPriority OBJECT IDENTIFIER ::= { es2310cQoS 7 }
es2310cQoSMTypeTOSPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CQoSMTypeTOSPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the ToS monetary cost priority mapping entry."
::= { es2310cQoSMTypeTOSPriority 1 }
ES2310CQoSMTypeTOSPriorityEntry ::=
SEQUENCE {
es2310cQoSMTypeTOSPriorityIndex INTEGER,
es2310cQoSMTypeTOSPriorityValue INTEGER,
es2310cQoSMTypeTOSPriorityQueue INTEGER
}
es2310cQoSMTypeTOSPriorityEntry OBJECT-TYPE
SYNTAX ES2310CQoSMTypeTOSPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for the TOS monetary cost mapping entry."
INDEX {es2310cQoSMTypeTOSPriorityIndex}
::= { es2310cQoSMTypeTOSPriorityTable 1 }
es2310cQoSMTypeTOSPriorityIndex OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the TOS monetary cost priority mapping table."
::= { es2310cQoSMTypeTOSPriorityEntry 1 }
es2310cQoSMTypeTOSPriorityValue OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of TOS monetary cost priority mapping entry."
::= { es2310cQoSMTypeTOSPriorityEntry 2 }
es2310cQoSMTypeTOSPriorityQueue OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queue of TOS monetary cost priority mapping entry."
::= { es2310cQoSMTypeTOSPriorityEntry 3 }
es2310cQoSDSCPPriority OBJECT IDENTIFIER ::= { es2310cQoS 8 }
es2310cQoSDSCPPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CQoSDSCPPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the DSCP priority entry."
::= { es2310cQoSDSCPPriority 1 }
ES2310CQoSDSCPPriorityEntry ::=
SEQUENCE {
es2310cQoSDSCPPriorityIndex INTEGER,
es2310cQoSDSCPPriorityValue INTEGER,
es2310cQoSDSCPPriorityQueue INTEGER
}
es2310cQoSDSCPPriorityEntry OBJECT-TYPE
SYNTAX ES2310CQoSDSCPPriorityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for the DSCP priority mapping entry."
INDEX {es2310cQoSDSCPPriorityIndex}
::= { es2310cQoSDSCPPriorityTable 1 }
es2310cQoSDSCPPriorityIndex OBJECT-TYPE
SYNTAX INTEGER(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the DSCP priority priority mapping table."
::= { es2310cQoSDSCPPriorityEntry 1 }
es2310cQoSDSCPPriorityValue OBJECT-TYPE
SYNTAX INTEGER(0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of DSCP priority priority mapping entry."
::= { es2310cQoSDSCPPriorityEntry 2 }
es2310cQoSDSCPPriorityQueue OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queue of DSCP priority priority mapping entry."
::= { es2310cQoSDSCPPriorityEntry 3 }
es2310cVlan OBJECT IDENTIFIER ::= { es2310cProduces 17 }
es2310cVlanModeConfig OBJECT IDENTIFIER ::= { es2310cVlan 1 }
es2310cVlanMode OBJECT-TYPE
SYNTAX INTEGER(0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0:Tag-based, 1:Port-based, 2:Metro mode"
::= { es2310cVlanModeConfig 1 }
es2310cSymmetricVlan OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Symmetric VLAN: for tag-based
0:disable, 1:enable"
::= { es2310cVlanModeConfig 2 }
es2310cVlanSVL OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SVL: : for tag-based
0:disable, 1:enable"
::= { es2310cVlanModeConfig 3 }
es2310cDoubleTag OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Double Tag: for tag-based
0:disable, 1:enable"
::= { es2310cVlanModeConfig 4 }
es2310cUpLinkPort OBJECT-TYPE
SYNTAX INTEGER(0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up link Port: for Metro mode
0:Port 9, 1:Port 10, 2:Port 9 & 10"
::= { es2310cVlanModeConfig 5 }
es2310cTagBasedVlanGroup OBJECT IDENTIFIER ::= { es2310cVlan 2 }
es2310cTagBasedVlanNumbers OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total numbers for tag-based vlan."
::= { es2310cTagBasedVlanGroup 1 }
es2310cTagBasedCreateStatus OBJECT-TYPE
SYNTAX INTEGER(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Creat a temp vlan in tag-based vlan table.
0 : none,
1~4094 : creat with this vid.
"
::= { es2310cTagBasedVlanGroup 2 }
es2310cTagBasedVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CTagBasedVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { es2310cTagBasedVlanGroup 3 }
ES2310CTagBasedVlanEntry ::=
SEQUENCE {
es2310cTagBasedVlanVid INTEGER,
es2310cTagBasedVlanName DisplayString,
es2310cTagBasedVlanMember DisplayString,
es2310cTagBasedVlanUntag DisplayString,
es2310cTagBasedVlanRowStatus INTEGER
}
es2310cTagBasedVlanEntry OBJECT-TYPE
SYNTAX ES2310CTagBasedVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for tag-based vlan table."
INDEX {es2310cTagBasedVlanVid}
::= { es2310cTagBasedVlanTable 1 }
es2310cTagBasedVlanVid OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The vid of vlan."
::= { es2310cTagBasedVlanEntry 1 }
es2310cTagBasedVlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of vlan."
::= { es2310cTagBasedVlanEntry 2 }
es2310cTagBasedVlanMember OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The member of vlan."
::= { es2310cTagBasedVlanEntry 3 }
es2310cTagBasedVlanUntag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The untag port of vlan."
::= { es2310cTagBasedVlanEntry 4 }
es2310cTagBasedVlanRowStatus OBJECT-TYPE
SYNTAX INTEGER(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of vlan.
1 : active,
2 : not-inService,
3 : delete
"
::= { es2310cTagBasedVlanEntry 5 }
es2310cVlanPvid OBJECT IDENTIFIER ::= { es2310cVlan 3 }
es2310cVlanPvidTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CVlanPvidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { es2310cVlanPvid 1 }
ES2310CVlanPvidEntry ::=
SEQUENCE {
es2310cVlanPvidPort INTEGER,
es2310cVlanPvidValue INTEGER,
es2310cVlanPvidDefaultPriority INTEGER,
es2310cVlanPvidDropUntag INTEGER
}
es2310cVlanPvidEntry OBJECT-TYPE
SYNTAX ES2310CVlanPvidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for Vlan Pvid."
INDEX {es2310cVlanPvidPort}
::= { es2310cVlanPvidTable 1 }
es2310cVlanPvidPort OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port number of pvid entry."
::= { es2310cVlanPvidEntry 1 }
es2310cVlanPvidValue OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pvid value of port."
::= { es2310cVlanPvidEntry 2 }
es2310cVlanPvidDefaultPriority OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default priority of port ."
::= { es2310cVlanPvidEntry 3 }
es2310cVlanPvidDropUntag OBJECT-TYPE
SYNTAX INTEGER(0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The drop untag of port ."
::= { es2310cVlanPvidEntry 4 }
es2310cPortBasedVlanGroup OBJECT IDENTIFIER ::= { es2310cVlan 4 }
es2310cPortBasedVlanNumbers OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total numbers for tag-based vlan."
::= { es2310cPortBasedVlanGroup 1 }
es2310cPortBasedCreateStatus OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Creat a temp vlan in port-based vlan table.
0 : none,
1 : creat a new port-based vlan.
"
::= { es2310cPortBasedVlanGroup 2 }
es2310cPortBasedVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CPortBasedVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { es2310cPortBasedVlanGroup 3 }
ES2310CPortBasedVlanEntry ::=
SEQUENCE {
es2310cPortBasedVlanIndex INTEGER,
es2310cPortBasedVlanName DisplayString,
es2310cPortBasedVlanMember DisplayString,
es2310cPortBasedVlanRowStatus INTEGER
}
es2310cPortBasedVlanEntry OBJECT-TYPE
SYNTAX ES2310CPortBasedVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for port-based vlan table."
INDEX {es2310cPortBasedVlanIndex}
::= { es2310cPortBasedVlanTable 1 }
es2310cPortBasedVlanIndex OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of vlan."
::= { es2310cPortBasedVlanEntry 1 }
es2310cPortBasedVlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of vlan."
::= { es2310cPortBasedVlanEntry 2 }
es2310cPortBasedVlanMember OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The member of vlan."
::= { es2310cPortBasedVlanEntry 3 }
es2310cPortBasedVlanRowStatus OBJECT-TYPE
SYNTAX INTEGER(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The row status of vlan.
1 : active,
2 : not-inService,
3 : delete
"
::= { es2310cPortBasedVlanEntry 4 }
es2310cManagementVlan OBJECT IDENTIFIER ::= { es2310cVlan 5 }
es2310cManagementVlanState OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The stat of management vlan. (for tag-base)
0 : Disable,
1 : Enable.
"
::= { es2310cManagementVlan 1 }
es2310cManagementVlanVid OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vid value of management vlan."
::= { es2310cManagementVlan 2 }
es2310cDot1X OBJECT IDENTIFIER ::= { es2310cProduces 18 }
es2310cDot1XStateSetting OBJECT IDENTIFIER ::= { es2310cDot1X 1 }
es2310cRadiusServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set radius server ip"
::= { es2310cDot1XStateSetting 1 }
es2310cDot1XPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set 802.1X port number"
::= { es2310cDot1XStateSetting 2 }
es2310cSecretKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set 802.1X secret key"
::= { es2310cDot1XStateSetting 3 }
es2310cAccountingService OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set 802.1X accounting service
0 : disable
1 : enable
"
::= { es2310cDot1XStateSetting 4 }
es2310cAccountingServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set 802.1X accounting server"
::= { es2310cDot1XStateSetting 5 }
es2310cAccountingPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set 802.1X accounting port number"
::= { es2310cDot1XStateSetting 6 }
es2310cDot1XPortSecurityManagement OBJECT IDENTIFIER ::= { es2310cDot1X 2 }
es2310cDot1XPortSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CDot1XPortSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of the 802.1x port security entry."
::= { es2310cDot1XPortSecurityManagement 1 }
ES2310CDot1XPortSecurityEntry ::=
SEQUENCE {
es2310cDot1XPortSecurityPortIndex INTEGER,
es2310cDot1XPortSecurityMode INTEGER,
es2310cDot1XPortSecurityPortControl INTEGER,
es2310cDot1XPortSecurityReAuthMax INTEGER,
es2310cDot1XPortSecurityTxPeriod INTEGER,
es2310cDot1XPortSecurityQuietPeriod INTEGER,
es2310cDot1XPortSecurityReAuthEnabled INTEGER,
es2310cDot1XPortSecurityReAuthPeriod INTEGER,
es2310cDot1XPortSecurityMaxRequest INTEGER,
es2310cDot1XPortSecuritySuppTimeout INTEGER,
es2310cDot1XPortSecurityServerTimeout INTEGER,
es2310cDot1XPortSecurityStatus DisplayString
}
es2310cDot1XPortSecurityEntry OBJECT-TYPE
SYNTAX ES2310CDot1XPortSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for 802.1x port security management table."
INDEX {es2310cDot1XPortSecurityPortIndex}
::= { es2310cDot1XPortSecurityTable 1 }
es2310cDot1XPortSecurityPortIndex OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port index of 802.1x port security."
::= { es2310cDot1XPortSecurityEntry 1 }
es2310cDot1XPortSecurityMode OBJECT-TYPE
SYNTAX INTEGER(0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of 802.1x port security.
0 : Disable,
1 : Normal,
2 : Advanced 802.1X
"
::= { es2310cDot1XPortSecurityEntry 2 }
es2310cDot1XPortSecurityPortControl OBJECT-TYPE
SYNTAX INTEGER(0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port control of 802.1x port security.
0 : ForceUnauthorized,
1 : ForceAuthorized,
2 : Auto
"
::= { es2310cDot1XPortSecurityEntry 3 }
es2310cDot1XPortSecurityReAuthMax OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reAuthMax(1~10) of 802.1x port security."
::= { es2310cDot1XPortSecurityEntry 4 }
es2310cDot1XPortSecurityTxPeriod OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The txPeriod(1~65535) of 802.1x port security."
::= { es2310cDot1XPortSecurityEntry 5 }
es2310cDot1XPortSecurityQuietPeriod OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The quiet period(0~65535) of 802.1x port security."
::= { es2310cDot1XPortSecurityEntry 6 }
es2310cDot1XPortSecurityReAuthEnabled OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reAuthEnabled of 802.1x port security.
0 : off,
1 : on.
"
::= { es2310cDot1XPortSecurityEntry 7 }
es2310cDot1XPortSecurityReAuthPeriod OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reAuthPeriod(1~65535) of 802.1x port security."
::= { es2310cDot1XPortSecurityEntry 8 }
es2310cDot1XPortSecurityMaxRequest OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max.request(1~10) of 802.1x port security."
::= { es2310cDot1XPortSecurityEntry 9 }
es2310cDot1XPortSecuritySuppTimeout OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The suppTimeout(1~65535) of 802.1x port security."
::= { es2310cDot1XPortSecurityEntry 10 }
es2310cDot1XPortSecurityServerTimeout OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The server timeout(1~65535) of 802.1x port security."
::= { es2310cDot1XPortSecurityEntry 11 }
es2310cDot1XPortSecurityStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of 802.1x port security."
::= { es2310cDot1XPortSecurityEntry 12 }
es2310cTrunkInfo OBJECT IDENTIFIER ::= { es2310cProduces 19 }
es2310cTrunkPort OBJECT IDENTIFIER ::= { es2310cTrunkInfo 1 }
es2310cTrunkPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CTrunkPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { es2310cTrunkPort 1 }
ES2310CTrunkPortEntry ::=
SEQUENCE {
es2310cTrunkPortIndex INTEGER,
es2310cTrunkPortMethod INTEGER,
es2310cTrunkPortGroup INTEGER,
es2310cTrunkPortActiveLacp INTEGER,
es2310cTrunkPortAggtr INTEGER,
es2310cTrunkPortStatus INTEGER,
es2310cTrunkPortCurrentMode INTEGER
}
es2310cTrunkPortEntry OBJECT-TYPE
SYNTAX ES2310CTrunkPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for trunk table."
INDEX {es2310cTrunkPortIndex}
::= { es2310cTrunkPortTable 1 }
es2310cTrunkPortIndex OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port index of trunk table."
::= { es2310cTrunkPortEntry 1 }
es2310cTrunkPortMethod OBJECT-TYPE
SYNTAX INTEGER(0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The method of trunk port.
0 : None,
1 : LACP,
2 : Static.
"
::= { es2310cTrunkPortEntry 2 }
es2310cTrunkPortGroup OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The group(0~3) of trunk port. Each group just can have one method.
Rule1: Maximum 3 groups are allowed.
Rule2: The members of each group cannot exceed more than 4 ports.
Rule3: Group 1 and 2 cannot exist member 9 and 10 port.
Rule4: Group 3 cannot exist member from 1 to 10 port. "
::= { es2310cTrunkPortEntry 3 }
es2310cTrunkPortActiveLacp OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active lacp mode of trunk port.
0 : Passive,
1 : Active.
"
::= { es2310cTrunkPortEntry 4 }
es2310cTrunkPortAggtr OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Aggtr of trunk port."
::= { es2310cTrunkPortEntry 5 }
es2310cTrunkPortStatus OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of trunk port.
0 : None,
1 : Ready.
"
::= { es2310cTrunkPortEntry 6 }
es2310cTrunkPortCurrentMode OBJECT-TYPE
SYNTAX INTEGER(0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current mode of trunk port entry.
0 : Active mode,
1 : Edit mode,
2 : Do edit.
"
::= { es2310cTrunkPortEntry 7 }
es2310cAggregatorView OBJECT IDENTIFIER ::= { es2310cTrunkInfo 2 }
es2310cAggregatorViewTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CAggregatorViewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { es2310cAggregatorView 1 }
ES2310CAggregatorViewEntry ::=
SEQUENCE {
es2310cAggregatorViewIndex INTEGER,
es2310cAggregatorViewMethod INTEGER,
es2310cAggregatorViewMemberPorts DisplayString,
es2310cAggregatorViewReadyPorts DisplayString
}
es2310cAggregatorViewEntry OBJECT-TYPE
SYNTAX ES2310CAggregatorViewEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for aggregator view table."
INDEX {es2310cAggregatorViewIndex}
::= { es2310cAggregatorViewTable 1 }
es2310cAggregatorViewIndex OBJECT-TYPE
SYNTAX INTEGER(1..10)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port index of aggregator view table."
::= { es2310cAggregatorViewEntry 1 }
es2310cAggregatorViewMethod OBJECT-TYPE
SYNTAX INTEGER(0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The method of aggregator view table.
0 : None,
1 : LACP,
2 : Static.
"
::= { es2310cAggregatorViewEntry 2 }
es2310cAggregatorViewMemberPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The member ports of aggregator view table."
::= { es2310cAggregatorViewEntry 3 }
es2310cAggregatorViewReadyPorts OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ready ports of aggregator view table."
::= { es2310cAggregatorViewEntry 4 }
es2310cLacpSystemConfiguration OBJECT IDENTIFIER ::= { es2310cTrunkInfo 3 }
es2310cLacpSystemPriority OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority of LACP system."
::= { es2310cLacpSystemConfiguration 1 }
es2310cLacpSystemHashMethod OBJECT-TYPE
SYNTAX INTEGER(0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hash method of LACP system.
0 : DA and SA
1 : SA
2 : DA
"
::= { es2310cLacpSystemConfiguration 2 }
es2310cTrapEntry OBJECT IDENTIFIER ::= { es2310cProduces 20 }
es2310cModuleInserted NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"Send this trap when a module is inserted to the system. The OID value means
the port number."
::= { es2310cTrapEntry 1 }
es2310cModuleRemoved NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"Send this trap when a module is removed from the system. The OID value means
the port number."
::= { es2310cTrapEntry 2 }
es2310cDualMediaSwapped NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"Send this trap when the dual media port changed. The OID value means the port number."
::= { es2310cTrapEntry 3 }
es2310cPoEFailure NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Send this trap while detecting the malfunction of PoE chips."
::= { es2310cTrapEntry 4 }
es2310cLoopDetected NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"Send this trap when loop condition has been detected. The OID value means the port number."
::= { es2310cTrapEntry 5 }
es2310cLoginProtected NOTIFICATION-TYPE
OBJECTS { loginProtectInfo }
STATUS current
DESCRIPTION
"Send the trap when login protect has been detected."
::= { es2310cTrapEntry 6 }
es2310cStpStateDisabled NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Send this trap when the operational state of STP is from enabled to disabled. "
::= { es2310cTrapEntry 100 }
es2310cStpStateEnabled NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Send this trap when the operational state of STP is from disabled to enabled. "
::= { es2310cTrapEntry 101 }
es2310cStpTopologyChanged NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION
"Send this trap when RSTP determines a port should enter the FORWARDING state
(a topology change occurs). The OID value is the ifIndex of the port that
produces the topology change"
::= { es2310cTrapEntry 102 }
es2310cRmonRisingAlarm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Send this trap when an RMON rising alarm happened. The OID value is the value
of another OID variable sampled by the RMON Alarm Group that exceeds its
own RisingThreshold "
::= { es2310cTrapEntry 110 }
es2310cRmonFallingAlarm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Send this trap when an RMON falling alarm happened. The OID value is the value
of another OID variable sampled by the RMON Alarm Group that is smaller than its
own FallingThreshold "
::= { es2310cTrapEntry 111 }
es2310cLacpStateDisabled NOTIFICATION-TYPE
OBJECTS {ifIndex, groupId}
STATUS current
DESCRIPTION
"Send this trap when the operational state of LACP is from enabled to disabled.
The OID value means the disabled Group ID."
::= { es2310cTrapEntry 120 }
es2310cLacpStateEnabled NOTIFICATION-TYPE
OBJECTS {ifIndex, groupId}
STATUS current
DESCRIPTION
"Send this trap when the operational state of LACP is from disabled to enabled.
The OID value means the disabled Group ID."
::= { es2310cTrapEntry 121 }
es2310cLacpPortAdded NOTIFICATION-TYPE
OBJECTS { ifIndex, actorkey, partnerkey }
STATUS current
DESCRIPTION
"Send this trap when the state of port is in 'trunk ready'."
::= { es2310cTrapEntry 123 }
es2310cLacpPortTrunkFailure NOTIFICATION-TYPE
OBJECTS { ifIndex, actorkey, partnerkey}
STATUS current
DESCRIPTION
"Send this trap when one port is not able to be aggregated
due to duplex-mode of the port. "
::= { es2310cTrapEntry 124 }
es2310cGvrpStateDisabled NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Send this trap when the operational state of GVRP is from enabled to disabled. "
::= { es2310cTrapEntry 140 }
es2310cGvrpStateEnabled NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Send this trap when the operational state of LACP is from disabled to enabled. "
::= { es2310cTrapEntry 141 }
es2310cVlanPortBaseEnabled NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Send this trap when the operational state of vlan is changed to port-based vlan."
::= { es2310cTrapEntry 151 }
es2310cVlanTagBaseEnabled NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Send this trap when the operational state of vlan is changed to tag-based vlan."
::= { es2310cTrapEntry 152 }
es2310cVlanMetroBaseEnabled NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Send this trap when the operational state of vlan is changed to metro-based vlan."
::= { es2310cTrapEntry 153 }
es2310cUserLogin NOTIFICATION-TYPE
OBJECTS {username}
STATUS current
DESCRIPTION
"Send this trap when one user logins the system."
::= { es2310cTrapEntry 200 }
es2310cUserLogout NOTIFICATION-TYPE
OBJECTS {username}
STATUS current
DESCRIPTION
"Send this trap when one user logouts the system."
::= { es2310cTrapEntry 201 }
es2310cTrapVariable OBJECT IDENTIFIER ::= { es2310cProduces 21 }
username OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System account name."
::= { es2310cTrapVariable 1 }
groupId OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Trunk group ID of LACP."
::= { es2310cTrapVariable 2 }
actorkey OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actor key information for LACP."
::= { es2310cTrapVariable 3 }
partnerkey OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The partner key information for LACP."
::= { es2310cTrapVariable 4 }
uplink OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink port(s) in the metro-mode vlan."
::= { es2310cTrapVariable 5 }
loginProtectInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Loging protect information."
::= { es2310cTrapVariable 6 }
es2310cLoginProtect OBJECT IDENTIFIER ::= { es2310cProduces 22 }
es2310cLockMinutes OBJECT-TYPE
SYNTAX INTEGER(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the login lock time. Available from 0 to 10 (minutes)
Set 0 as disabled.
"
::= { es2310cLoginProtect 1 }
es2310cLoginErrors OBJECT-TYPE
SYNTAX INTEGER(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set login error count. Available from 0 to 10 (times)
Set 0 as disabled.
"
::= { es2310cLoginProtect 2 }
es2310cIgmpSnooping OBJECT IDENTIFIER ::= { es2310cProduces 23 }
es2310cIgmpSnoopingMode OBJECT-TYPE
SYNTAX INTEGER(0|1|2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Igmp Snooping Mode.
0 : disable,
1 : active,
2 : passive
"
::= { es2310cIgmpSnooping 1 }
es2310cIgmpSnoopingRouterPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Igmp Snooping Router Port."
::= { es2310cIgmpSnooping 2 }
es2310cIgmpVlanGroupAllow OBJECT IDENTIFIER ::= { es2310cIgmpSnooping 3 }
es2310cIgmpVlanGroupAllowState OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Igmp Vlan Group Allow State.
0 : disable,
1 : enable,
"
::= { es2310cIgmpVlanGroupAllow 1 }
es2310cIgmpVlanGroupAllowNumber OBJECT-TYPE
SYNTAX INTEGER(0..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is number of Igmp Vlan Group Allow table entry"
::= { es2310cIgmpVlanGroupAllow 2 }
es2310cIgmpVlanGroupAllowEntryCreate OBJECT-TYPE
SYNTAX INTEGER(0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Creat a Igmp Vlan Group Allow entry.
Set 1: add a new entry,
Get: the number means index."
::= { es2310cIgmpVlanGroupAllow 3 }
es2310cIgmpVlanGroupAlloTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CIgmpVlanGroupAllowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of Igmp Vlan Group Allow table."
::= { es2310cIgmpVlanGroupAllow 4 }
ES2310CIgmpVlanGroupAllowEntry ::=
SEQUENCE {
es2310cIgmpVlanGroupAllowIndex INTEGER,
es2310cIgmpVlanGroupAllowIpRange DisplayString,
es2310cIgmpVlanGroupAllowVid INTEGER,
es2310cIgmpVlanGroupAllowPort INTEGER,
es2310cIgmpVlanGroupAllowEntryAction INTEGER
}
ES2310CIgmpVlanGroupAllowEntry OBJECT-TYPE
SYNTAX ES2310CIgmpVlanGroupAllowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for Igmp Vlan Group Allow Table."
INDEX {es2310cIgmpVlanGroupAllowIndex}
::= { es2310cIgmpVlanGroupAlloTable 1 }
es2310cIgmpVlanGroupAllowIndex OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of Igmp Vlan Group Allow Table."
::= { ES2310CIgmpVlanGroupAllowEntry 1 }
es2310cIgmpVlanGroupAllowIpRange OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start address of Igmp Vlan Group Allow table entry."
::= { ES2310CIgmpVlanGroupAllowEntry 2 }
es2310cIgmpVlanGroupAllowVid OBJECT-TYPE
SYNTAX INTEGER(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan id of Igmp Vlan Group Allow table entry. 0: any VID."
::= { ES2310CIgmpVlanGroupAllowEntry 3 }
es2310cIgmpVlanGroupAllowPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port of Igmp Vlan Group Allow table entry."
::= { ES2310CIgmpVlanGroupAllowEntry 4 }
es2310cIgmpVlanGroupAllowEntryAction OBJECT-TYPE
SYNTAX INTEGER(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action of Igmp Vlan Group Allow table entry.
1:action
2:non-action
3:delete"
::= { ES2310CIgmpVlanGroupAllowEntry 5 }
es2310cIgmpStaticIpMulticast OBJECT IDENTIFIER ::= { es2310cIgmpSnooping 4 }
es2310cIgmpStaticIpMulticastNumber OBJECT-TYPE
SYNTAX INTEGER(0..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is number of Igmp Static IP Multicast table entry"
::= { es2310cIgmpStaticIpMulticast 1 }
es2310cIgmpStaticIpMulticastEntryCreate OBJECT-TYPE
SYNTAX INTEGER(0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Creat a Igmp Static IP Multicast entry.
Set 1: add a new entry,
Get: the number means index."
::= { es2310cIgmpStaticIpMulticast 2 }
es2310cIgmpStaticIpMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CIgmpStaticIpMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a list of Igmp Static IP Multicast table."
::= { es2310cIgmpStaticIpMulticast 3 }
ES2310CIgmpStaticIpMulticastEntry ::=
SEQUENCE {
es2310cIgmpStaticIpMulticastIndex INTEGER,
es2310cIgmpStaticIpMulticastIp DisplayString,
es2310cIgmpStaticIpMulticastVid INTEGER,
es2310cIgmpStaticIpMulticastPort INTEGER,
es2310cIgmpStaticIpMulticastEntryAction INTEGER
}
ES2310CIgmpStaticIpMulticastEntry OBJECT-TYPE
SYNTAX ES2310CIgmpStaticIpMulticastEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for Igmp Static IP Multicast Table."
INDEX {es2310cIgmpStaticIpMulticastIndex}
::= { es2310cIgmpStaticIpMulticastTable 1 }
es2310cIgmpStaticIpMulticastIndex OBJECT-TYPE
SYNTAX INTEGER(1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of Igmp Static IP Multicast Table."
::= { ES2310CIgmpStaticIpMulticastEntry 1 }
es2310cIgmpStaticIpMulticastIp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of Igmp Static IP Multicast table entry."
::= { ES2310CIgmpStaticIpMulticastEntry 2 }
es2310cIgmpStaticIpMulticastVid OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The vlan id of Igmp Static IP Multicast table entry."
::= { ES2310CIgmpStaticIpMulticastEntry 3 }
es2310cIgmpStaticIpMulticastPort OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port of Igmp Static IP Multicast table entry."
::= { ES2310CIgmpStaticIpMulticastEntry 4 }
es2310cIgmpStaticIpMulticastEntryAction OBJECT-TYPE
SYNTAX INTEGER(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action of Igmp Static IP Multicast table entry.
1:action
2:non-action
3:delete"
::= { ES2310CIgmpStaticIpMulticastEntry 5 }
es2310cRadiusIgmpSetting OBJECT IDENTIFIER ::= { es2310cIgmpSnooping 5 }
es2310cRadiusIgmpServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius Igmp Server1"
::= { es2310cRadiusIgmpSetting 1 }
es2310cRadiusIgmpPortNumber1 OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Igmp port number1.
port number: from 1 to 65535"
::= { es2310cRadiusIgmpSetting 2 }
es2310cRadiusIgmpServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radius Igmp Server2"
::= { es2310cRadiusIgmpSetting 3 }
es2310cRadiusIgmpPortNumber2 OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Igmp port number2.
port number: from 1 to 65535"
::= { es2310cRadiusIgmpSetting 4 }
es2310cRadiusIgmpResponseTimeout OBJECT-TYPE
SYNTAX INTEGER(2..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set radius-igmp timeout.
time: 2 ~ 60 seconds"
::= { es2310cRadiusIgmpSetting 5 }
es2310cRadiusIgmpNumberOfRetry OBJECT-TYPE
SYNTAX INTEGER(0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set radius-igmp number of retry.
value: 0 ~ 10 times"
::= { es2310cRadiusIgmpSetting 6 }
es2310cRadiusIgmpSecretKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set Radius Igmp secret key.
The length of secret-key is from 1 to 31"
::= { es2310cRadiusIgmpSetting 7 }
es2310cRadiusIgmpPortMember OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Port Member of Radius Igmp."
::= { es2310cRadiusIgmpSetting 8 }
es2310cMulticastStatus OBJECT IDENTIFIER ::= { es2310cIgmpSnooping 6 }
es2310cMulticastStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ES2310CMulticastStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
::= { es2310cMulticastStatus 1 }
es2310cMulticastStatusEntry OBJECT-TYPE
SYNTAX ES2310CMulticastStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry(s) for Multicast Status table."
INDEX {es2310cMulticastStatusIndex}
::= { es2310cMulticastStatusTable 1 }
ES2310CMulticastStatusEntry ::=
SEQUENCE {
es2310cMulticastStatusIndex INTEGER,
es2310cMulticastStatusVid INTEGER,
es2310cMulticastStatusMulticastGroup IpAddress,
es2310cMulticastStatusPortMember DisplayString
}
es2310cMulticastStatusIndex OBJECT-TYPE
SYNTAX INTEGER(1..256)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of multicast status table."
::= { es2310cMulticastStatusEntry 1 }
es2310cMulticastStatusVid OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Vid of multicast status table."
::= { es2310cMulticastStatusEntry 2 }
es2310cMulticastStatusMulticastGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Multicast Group of multicast status table."
::= { es2310cMulticastStatusEntry 3 }
es2310cMulticastStatusPortMember OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Member of multicast status table."
::= { es2310cMulticastStatusEntry 4 }
END
View Git Blame Copy Permalink