635 lines
22 KiB
Plaintext
635 lines
22 KiB
Plaintext
MPLS-FRR-GENERAL-STD-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, mib-2,
|
|
Unsigned32,
|
|
Counter32
|
|
FROM SNMPv2-SMI -- [RFC2578]
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF -- [RFC2580]
|
|
RowStatus, StorageType
|
|
FROM SNMPv2-TC -- [RFC2579]
|
|
InterfaceIndexOrZero,
|
|
ifGeneralInformationGroup,
|
|
ifCounterDiscontinuityGroup
|
|
|
|
FROM IF-MIB -- [RFC2863]
|
|
MplsTunnelIndex, MplsTunnelInstanceIndex,
|
|
MplsBitRate,
|
|
MplsTunnelAffinity
|
|
FROM MPLS-TC-STD-MIB -- [RFC3811]
|
|
mplsTunnelGroup, mplsTunnelScalarGroup,
|
|
mplsTunnelARHopListIndex, mplsTunnelARHopIndex
|
|
FROM MPLS-TE-STD-MIB -- [RFC3812]
|
|
;
|
|
|
|
mplsFrrGeneralMIB MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"201111030000Z" -- 03 Nov 2011 00:00:00 GMT
|
|
ORGANIZATION
|
|
"Multiprotocol Label Switching (MPLS) Working Group"
|
|
CONTACT-INFO
|
|
"
|
|
Riza Cetin
|
|
Email: riza.cetin@alcatel.be
|
|
|
|
Thomas D. Nadeau
|
|
Email: thomas.nadeau@ca.com
|
|
|
|
A S Kiran Koushik
|
|
Email: kkoushik@cisco.com
|
|
|
|
Stefaan De Cnodder
|
|
Email: Stefaan.de_cnodder@alcatel.be
|
|
|
|
Der-Hwa Gan
|
|
Email: dhg@juniper.net
|
|
"
|
|
DESCRIPTION
|
|
"Copyright (c) 2011 IETF Trust and the persons
|
|
identified as authors of the code. All rights
|
|
reserved.
|
|
|
|
Redistribution and use in source and binary forms,
|
|
with or without modification, is permitted pursuant
|
|
to, and subject to the license terms contained in,
|
|
the Simplified BSD License set forth in Section 4.c
|
|
of the IETF Trust's Legal Provisions Relating to
|
|
IETF Documents
|
|
(http://trustee.ietf.org/license-info).
|
|
|
|
This MIB module contains generic object definitions for
|
|
MPLS Traffic Engineering Fast Reroute as defined in
|
|
RFC 4090."
|
|
|
|
-- Revision history.
|
|
REVISION
|
|
"201111030000Z" -- 03 Nov 2011 00:00:00 GMT
|
|
DESCRIPTION
|
|
"Initial version. Published as RFC 6445."
|
|
::= { mib-2 202 }
|
|
|
|
-- Top-level components of this MIB module
|
|
|
|
mplsFrrGeneralObjects
|
|
OBJECT IDENTIFIER ::= { mplsFrrGeneralMIB 1 }
|
|
|
|
mplsFrrGeneralConformance
|
|
OBJECT IDENTIFIER ::= { mplsFrrGeneralMIB 2 }
|
|
|
|
-- MPLS Fast-Reroute generic scalars
|
|
|
|
mplsFrrGeneralProtectionMethod OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
oneToOneBackup(2),
|
|
facilityBackup(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which protection method is to be used for fast
|
|
reroute on this device. Some devices may require a reboot
|
|
if this variable is to take effect after being modified."
|
|
::= { mplsFrrGeneralObjects 1 }
|
|
|
|
mplsFrrGeneralIngressTunnelInstances OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of tunnel instances for either detour LSPs or
|
|
bypass tunnels for which this LSR is the ingress."
|
|
::= { mplsFrrGeneralObjects 2 }
|
|
|
|
--
|
|
-- General FRR Table section
|
|
--
|
|
-- These tables apply to both types of FRR
|
|
-- and should be implemented by all LSRs supporting
|
|
-- FRR.
|
|
--
|
|
-- MPLS Fast-Reroute Constraints table
|
|
|
|
mplsFrrGeneralConstraintsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsFrrGeneralConstraintsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table shows detour LSP or bypass tunnel setup
|
|
constraints."
|
|
::= { mplsFrrGeneralObjects 3 }
|
|
|
|
mplsFrrGeneralConstraintsEntry OBJECT-TYPE
|
|
SYNTAX MplsFrrGeneralConstraintsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table represents detour LSP or bypass
|
|
tunnel setup constraints for an interface or link to be
|
|
protected by detour LSPs or a bypass tunnel.
|
|
|
|
Once the LSP or tunnel instance to be protected is identified
|
|
in the mplsTunnelTable, the corresponding mplsTunnelIfIndex
|
|
|
|
value of that tunnel can be used to get the ifIndex of
|
|
the underlying physical interface using the ifStackTable.
|
|
That ifIndex of the underlying physical interface will
|
|
be used as mplsFrrGeneralConstraintsIfIndexOrZero in this
|
|
table to protect the LSPs or tunnel instances determined
|
|
earlier.
|
|
|
|
It is recommended that ifIndex persistence be enabled
|
|
across re-initializations. If persistence is not
|
|
implemented, then the value of
|
|
mplsFrrGeneralConstraintsIfIndexOrZero in this
|
|
table cannot be guaranteed across restarts and all entries
|
|
in this table MUST NOT be persistent, or the values of
|
|
mplsFrrGeneralConstraintsIfIndexOrZero MUST be reconstructed
|
|
on restart.
|
|
|
|
SNMP engines must only allow entries in this table
|
|
to be created for tunnel instances that require fast reroute
|
|
as indicated by the presence of the FAST_REROUTE object
|
|
in the signaling for the LSP in question.
|
|
|
|
An entry in this table can be created only if a
|
|
corresponding entry in mplsTunnelTable exists with the
|
|
same mplsTunnelIndex as mplsFrrGeneralConstraintsTunnelIndex.
|
|
|
|
Entries in this table are deleted when the corresponding
|
|
entries in mplsTunnelTable are deleted.
|
|
|
|
It is recommended that entries in this table be persistent
|
|
across reboots.
|
|
|
|
Entries indexed with mplsFrrGeneralConstraintsIfIndexOrZero
|
|
and set to 0 apply to all interfaces on this device for
|
|
which the FRR feature can operate.
|
|
|
|
If the mplsTunnelInstance object is set to a value of 0,
|
|
it indicates that the mplsTunnelEntry contains a tunnel
|
|
ingress. This is typically how configuration of this
|
|
feature is performed on devices where the actual
|
|
protection LSP used is left up to the protecting tunnel.
|
|
However, in cases where static configuration is
|
|
possible, any valid tunnel instance is possible;
|
|
however, it is strongly RECOMMENDED that the instance
|
|
index SHOULD use the following convention to identify
|
|
backup LSPs:
|
|
|
|
- lower 16 bits : protected tunnel instance
|
|
- higher 16 bits: must be all zeros"
|
|
REFERENCE
|
|
"Section 4.1 of RFC 4090 and Section 6.1 of RFC 3812."
|
|
INDEX { mplsFrrGeneralConstraintsIfIndexOrZero,
|
|
mplsFrrGeneralConstraintsTunnelIndex,
|
|
mplsFrrGeneralConstraintsTunnelInstance
|
|
}
|
|
::= { mplsFrrGeneralConstraintsTable 1 }
|
|
|
|
MplsFrrGeneralConstraintsEntry ::= SEQUENCE {
|
|
mplsFrrGeneralConstraintsIfIndexOrZero InterfaceIndexOrZero,
|
|
mplsFrrGeneralConstraintsTunnelIndex MplsTunnelIndex,
|
|
mplsFrrGeneralConstraintsTunnelInstance MplsTunnelInstanceIndex,
|
|
mplsFrrGeneralConstraintsProtectionType INTEGER,
|
|
mplsFrrGeneralConstraintsSetupPrio Unsigned32,
|
|
mplsFrrGeneralConstraintsHoldingPrio Unsigned32,
|
|
mplsFrrGeneralConstraintsInclAnyAffinity MplsTunnelAffinity,
|
|
mplsFrrGeneralConstraintsInclAllAffinity MplsTunnelAffinity,
|
|
mplsFrrGeneralConstraintsExclAnyAffinity MplsTunnelAffinity,
|
|
mplsFrrGeneralConstraintsHopLimit Unsigned32,
|
|
mplsFrrGeneralConstraintsBandwidth MplsBitRate,
|
|
mplsFrrGeneralConstraintsStorageType StorageType,
|
|
mplsFrrGeneralConstraintsRowStatus RowStatus
|
|
}
|
|
|
|
mplsFrrGeneralConstraintsIfIndexOrZero OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies an interface that a fast-reroute
|
|
protection tunnel is configured to potentially protect
|
|
in the event of a fault. Entries with this index set to
|
|
0 indicate that the configured protection tunnel protects
|
|
all interfaces on this device (i.e., node protection)."
|
|
::= { mplsFrrGeneralConstraintsEntry 1 }
|
|
|
|
mplsFrrGeneralConstraintsTunnelIndex OBJECT-TYPE
|
|
SYNTAX MplsTunnelIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies a tunnel in the mplsTunnelTable that
|
|
is configured to possibly protect the interface(s) specified
|
|
by mplsFrrGeneralConstraintsIfIndexOrZero in the event of a
|
|
fault."
|
|
REFERENCE
|
|
"mplsTunnelTable from RFC 3812."
|
|
::= { mplsFrrGeneralConstraintsEntry 2 }
|
|
|
|
mplsFrrGeneralConstraintsTunnelInstance OBJECT-TYPE
|
|
SYNTAX MplsTunnelInstanceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Uniquely identifies an existing instance of this tunnel
|
|
for which fast reroute is requested. Note that a value of
|
|
0 indicates that the configuration points at a tunnel
|
|
head (as specified in RFC 3812). This is typically how
|
|
configuration of this feature is performed on devices
|
|
where the actual protection LSP used is left up to the
|
|
protecting tunnel. However, in cases where static
|
|
configuration is possible, any valid tunnel instance is
|
|
permissible. In these cases, it is recommended that the
|
|
instance index follow the following convention so as
|
|
to make identification of backup LSPs easier:
|
|
|
|
- lower 16 bits : protected tunnel instance
|
|
- higher 16 bits: must be all zeros"
|
|
::= { mplsFrrGeneralConstraintsEntry 3 }
|
|
|
|
mplsFrrGeneralConstraintsProtectionType OBJECT-TYPE
|
|
SYNTAX INTEGER { linkProtection(1),
|
|
nodeProtection(2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates type of the resource protection:
|
|
|
|
linkProtection(1) indicates that this tunnel is
|
|
set up to protect a particular link's resources.
|
|
|
|
nodeProtection(2) indicates that this tunnel is
|
|
set up to protect an entire node from failure."
|
|
REFERENCE
|
|
"Section 3 of RFC 4090."
|
|
DEFVAL { nodeProtection }
|
|
::= { mplsFrrGeneralConstraintsEntry 4 }
|
|
|
|
mplsFrrGeneralConstraintsSetupPrio OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the setup priority of the detour LSP
|
|
or bypass tunnel."
|
|
REFERENCE
|
|
"Section 4.7 of RFC 3209."
|
|
DEFVAL { 7 }
|
|
::= { mplsFrrGeneralConstraintsEntry 5 }
|
|
|
|
mplsFrrGeneralConstraintsHoldingPrio OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..7)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the holding priority for the detour LSP
|
|
or bypass tunnel."
|
|
REFERENCE
|
|
"Section 4.7 of RFC 3209."
|
|
DEFVAL { 0 }
|
|
::= { mplsFrrGeneralConstraintsEntry 6 }
|
|
|
|
mplsFrrGeneralConstraintsInclAnyAffinity OBJECT-TYPE
|
|
SYNTAX MplsTunnelAffinity
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the include-any link constraint for the
|
|
detour LSP or bypass tunnel. A link satisfies the
|
|
include-any constraint if and only if the constraint
|
|
is zero, or the link and the constraint have a
|
|
resource class in common."
|
|
REFERENCE
|
|
"Section 4.7 of RFC 3209."
|
|
DEFVAL { 0 }
|
|
::= { mplsFrrGeneralConstraintsEntry 7 }
|
|
|
|
mplsFrrGeneralConstraintsInclAllAffinity OBJECT-TYPE
|
|
SYNTAX MplsTunnelAffinity
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the include-all link constraint for the
|
|
detour LSP or bypass tunnel. A link satisfies the
|
|
include-all constraint if and only if the link contains
|
|
all of the administrative groups specified in the
|
|
constraint."
|
|
REFERENCE
|
|
"Section 4.7 of RFC 3209."
|
|
DEFVAL { 0 }
|
|
::= { mplsFrrGeneralConstraintsEntry 8 }
|
|
|
|
mplsFrrGeneralConstraintsExclAnyAffinity OBJECT-TYPE
|
|
SYNTAX MplsTunnelAffinity
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the exclude-any link constraint for the
|
|
detour LSP or bypass tunnel. A link satisfies the
|
|
exclude-any constraint if and only if the link contains
|
|
none of the administrative groups specified in the
|
|
constraint."
|
|
REFERENCE
|
|
"Section 4.7 of RFC 3209."
|
|
DEFVAL { 0 }
|
|
::= { mplsFrrGeneralConstraintsEntry 9 }
|
|
|
|
mplsFrrGeneralConstraintsHopLimit OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of hops that the detour LSP or
|
|
bypass tunnel may traverse."
|
|
REFERENCE
|
|
"Section 4.1 of RFC 4090."
|
|
DEFVAL { 32 }
|
|
::= { mplsFrrGeneralConstraintsEntry 10 }
|
|
|
|
mplsFrrGeneralConstraintsBandwidth OBJECT-TYPE
|
|
SYNTAX MplsBitRate
|
|
UNITS "kilobits per second"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum bandwidth specifically reserved for a detour
|
|
LSP or bypass tunnel, in units of thousands of bits
|
|
per second (kbps). Note that setting this value to 0
|
|
indicates best-effort treatment."
|
|
DEFVAL { 0 }
|
|
::= { mplsFrrGeneralConstraintsEntry 11 }
|
|
|
|
mplsFrrGeneralConstraintsStorageType OBJECT-TYPE
|
|
SYNTAX StorageType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The storage type for this configuration entry.
|
|
Conceptual rows having the value 'permanent'
|
|
need not allow write access to any columnar
|
|
|
|
objects in the row."
|
|
DEFVAL { volatile }
|
|
::= { mplsFrrGeneralConstraintsEntry 12 }
|
|
|
|
mplsFrrGeneralConstraintsRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to create, modify, and/or delete a row
|
|
in this table. When a row in this table is in active(1)
|
|
state, no objects in that row can be modified
|
|
except mplsFrrGeneralConstraintsRowStatus and
|
|
mplsFrrGeneralConstraintsStorageType."
|
|
::= { mplsFrrGeneralConstraintsEntry 13 }
|
|
|
|
-- MPLS Fast-Reroute Tunnel Actual Route Hop table
|
|
|
|
mplsFrrGeneralTunnelARHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF MplsFrrGeneralTunnelARHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table sparsely extends mplsTunnelARHopTable defined
|
|
in the MPLS-TE-STD-MIB module with fast-reroute objects.
|
|
These objects specify the status of local protection,
|
|
including availability and active use, on a per-hop basis,
|
|
of hops traversed by a protected tunnel."
|
|
::= { mplsFrrGeneralObjects 4 }
|
|
|
|
mplsFrrGeneralTunnelARHopEntry OBJECT-TYPE
|
|
SYNTAX MplsFrrGeneralTunnelARHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry contains fast-reroute protection status of a
|
|
single protected tunnel hop."
|
|
INDEX {
|
|
mplsTunnelARHopListIndex,
|
|
mplsTunnelARHopIndex
|
|
}
|
|
::= { mplsFrrGeneralTunnelARHopTable 1 }
|
|
|
|
MplsFrrGeneralTunnelARHopEntry ::= SEQUENCE {
|
|
mplsFrrGeneralTunnelARHopSessionAttributeFlags BITS,
|
|
mplsFrrGeneralTunnelARHopRROSubObjectFlags BITS
|
|
}
|
|
|
|
mplsFrrGeneralTunnelARHopSessionAttributeFlags OBJECT-TYPE
|
|
SYNTAX BITS { arHopSessionAttrFlagsUnsupported(0),
|
|
localProtectionDesired(1),
|
|
labelRecordingDesired(2),
|
|
sestyleDesired(3),
|
|
bandwidthProtectionDesired(4),
|
|
nodeProtectionDesired(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the desired values for the
|
|
associated SESSION_ATTRIBUTE flags. Note that since
|
|
this object is a BITS type, the bits may be set to
|
|
indicate various desired combinations of the
|
|
SESSION_ATTRIBUTE flags.
|
|
|
|
If SESSION_ATTRIBUTE flags are not supported, then this
|
|
object contains the value of
|
|
arHopSessionAttrFlagsUnsupported(0)."
|
|
REFERENCE
|
|
"See Section 4.3 of RFC 4090 for SESSION_ATTRIBUTE flags."
|
|
::= { mplsFrrGeneralTunnelARHopEntry 1 }
|
|
|
|
mplsFrrGeneralTunnelARHopRROSubObjectFlags OBJECT-TYPE
|
|
SYNTAX BITS { arHopRROSubObjectFlagsUnsupported(0),
|
|
localProtectionAvailable(1),
|
|
localProtectionInUse(2),
|
|
bandwidthProtection(3),
|
|
nodeProtection(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the flags that are currently
|
|
in use by the associated Record Route Object (RRO)
|
|
sub-object.
|
|
|
|
Note that since this object is a BITS type,
|
|
the bits may be set to indicate various combinations of
|
|
the flags.
|
|
|
|
If the RRO sub-object is not supported, then this object
|
|
contains the value of arHopRROSubObjectFlagsUnsupported(0)."
|
|
REFERENCE
|
|
"Section 4.4 of RFC 4090."
|
|
::= { mplsFrrGeneralTunnelARHopEntry 2 }
|
|
|
|
-- Notifications
|
|
|
|
-- Module Conformance Statement
|
|
|
|
mplsFrrGeneralCompliances
|
|
OBJECT IDENTIFIER ::= {mplsFrrGeneralConformance 1 }
|
|
|
|
mplsFrrGeneralGroups
|
|
OBJECT IDENTIFIER ::= {mplsFrrGeneralConformance 2 }
|
|
|
|
mplsFrrGeneralModuleFullCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statements for SNMP engines that support the
|
|
MPLS-FRR-GENERAL-STD-MIB module."
|
|
|
|
MODULE IF-MIB -- The Interfaces Group MIB module, RFC 2863.
|
|
MANDATORY-GROUPS {
|
|
ifGeneralInformationGroup,
|
|
ifCounterDiscontinuityGroup
|
|
}
|
|
|
|
MODULE MPLS-TE-STD-MIB -- The MPLS Traffic Engineering
|
|
-- MIB module, RFC 3812
|
|
MANDATORY-GROUPS {
|
|
mplsTunnelGroup,
|
|
mplsTunnelScalarGroup
|
|
}
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
mplsFrrGeneralScalarGroup,
|
|
mplsFrrGeneralTunnelARHopGroup,
|
|
mplsFrrGeneralConstraintsGroup
|
|
}
|
|
|
|
OBJECT mplsFrrGeneralConstraintsRowStatus
|
|
SYNTAX RowStatus { active(1), notInService(2) }
|
|
WRITE-SYNTAX RowStatus { active(1), notInService(2),
|
|
createAndGo(4), destroy(6)
|
|
}
|
|
DESCRIPTION
|
|
"Support for createAndWait and notReady is not required."
|
|
::= { mplsFrrGeneralCompliances 1 }
|
|
|
|
mplsFrrGeneralModuleReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Compliance statements for SNMP engines that support the
|
|
MPLS-FRR-GENERAL-STD-MIB module."
|
|
MODULE
|
|
|
|
MANDATORY-GROUPS {
|
|
mplsFrrGeneralScalarGroup,
|
|
mplsFrrGeneralTunnelARHopGroup,
|
|
mplsFrrGeneralConstraintsGroup
|
|
}
|
|
|
|
-- Scalars
|
|
|
|
OBJECT mplsFrrGeneralProtectionMethod
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
-- mplsFrrGeneralConstraintsTable
|
|
|
|
OBJECT mplsFrrGeneralConstraintsSetupPrio
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsFrrGeneralConstraintsHoldingPrio
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsFrrGeneralConstraintsInclAnyAffinity
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsFrrGeneralConstraintsInclAllAffinity
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsFrrGeneralConstraintsExclAnyAffinity
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsFrrGeneralConstraintsBandwidth
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsFrrGeneralConstraintsProtectionType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsFrrGeneralConstraintsHopLimit
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsFrrGeneralConstraintsStorageType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT mplsFrrGeneralConstraintsRowStatus
|
|
SYNTAX RowStatus { active(1) }
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
::= { mplsFrrGeneralCompliances 2 }
|
|
|
|
-- Units of conformance
|
|
|
|
mplsFrrGeneralScalarGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsFrrGeneralIngressTunnelInstances,
|
|
mplsFrrGeneralProtectionMethod
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects that are required to display general fast-reroute
|
|
information."
|
|
::= { mplsFrrGeneralGroups 1 }
|
|
|
|
mplsFrrGeneralConstraintsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsFrrGeneralConstraintsProtectionType,
|
|
mplsFrrGeneralConstraintsSetupPrio,
|
|
mplsFrrGeneralConstraintsHoldingPrio,
|
|
mplsFrrGeneralConstraintsInclAnyAffinity,
|
|
mplsFrrGeneralConstraintsInclAllAffinity,
|
|
mplsFrrGeneralConstraintsExclAnyAffinity,
|
|
mplsFrrGeneralConstraintsHopLimit,
|
|
mplsFrrGeneralConstraintsBandwidth,
|
|
mplsFrrGeneralConstraintsStorageType,
|
|
mplsFrrGeneralConstraintsRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects that are required to configure fast-reroute
|
|
constraints at the ingress LSR of the tunnel that
|
|
requires fast-reroute service."
|
|
::= { mplsFrrGeneralGroups 2 }
|
|
|
|
mplsFrrGeneralTunnelARHopGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
mplsFrrGeneralTunnelARHopSessionAttributeFlags,
|
|
mplsFrrGeneralTunnelARHopRROSubObjectFlags
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Objects that are required to present per-hop fast-reroute
|
|
protection status."
|
|
::= { mplsFrrGeneralGroups 3}
|
|
|
|
END
|