1271 lines
46 KiB
Plaintext
1271 lines
46 KiB
Plaintext
HPR-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
DisplayString, DateAndTime, TimeStamp, TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
|
|
Counter32, Gauge32, Unsigned32, TimeTicks,
|
|
OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
snanauMIB
|
|
FROM SNA-NAU-MIB
|
|
|
|
SnaControlPointName
|
|
FROM APPN-MIB;
|
|
|
|
hprMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9705140000Z"
|
|
ORGANIZATION "AIW APPN / HPR MIB SIG"
|
|
CONTACT-INFO
|
|
"
|
|
|
|
Bob Clouston
|
|
Cisco Systems
|
|
7025 Kit Creek Road
|
|
P.O. Box 14987
|
|
Research Triangle Park, NC 27709, USA
|
|
Tel: 1 919 472 2333
|
|
E-mail: clouston@cisco.com
|
|
|
|
Bob Moore
|
|
IBM Corporation
|
|
800 Park Offices Drive
|
|
RHJA/664
|
|
P.O. Box 12195
|
|
|
|
Research Triangle Park, NC 27709, USA
|
|
Tel: 1 919 254 4436
|
|
E-mail: remoore@ralvm6.vnet.ibm.com
|
|
"
|
|
DESCRIPTION
|
|
"This is the MIB module for objects used to
|
|
manage network devices with HPR capabilities."
|
|
::= { snanauMIB 6 }
|
|
-- snanauMIB ::= { mib-2 34 }
|
|
|
|
-- *********************************************************************
|
|
-- Textual Conventions
|
|
-- *********************************************************************
|
|
-- SnaControlPointName is imported from the APPN MIB
|
|
|
|
HprNceTypes ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit string identifying the set of functions provided by a
|
|
network connection endpoint (NCE). The following values are
|
|
defined:
|
|
|
|
bit 0: control point
|
|
bit 1: logical unit
|
|
bit 2: boundary function
|
|
bit 3: route setup
|
|
"
|
|
SYNTAX BITS { controlPoint(0),
|
|
logicalUnit(1),
|
|
boundaryFunction(2),
|
|
routeSetup(3) }
|
|
|
|
HprRtpCounter ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An object providing statistics for an RTP connection. A
|
|
Management Station can detect discontinuities in this counter
|
|
by monitoring the correspondingly indexed
|
|
hprRtpCounterDisconTime object."
|
|
SYNTAX Counter32
|
|
|
|
-- *********************************************************************
|
|
hprObjects OBJECT IDENTIFIER ::= { hprMIB 1 }
|
|
-- *********************************************************************
|
|
|
|
-- *********************************************************************
|
|
|
|
hprGlobal OBJECT IDENTIFIER ::= { hprObjects 1 }
|
|
-- *********************************************************************
|
|
-- The hprGlobal group applies to both intermediate and end nodes.
|
|
-- *********************************************************************
|
|
|
|
hprNodeCpName OBJECT-TYPE
|
|
SYNTAX SnaControlPointName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively assigned network name for the APPN node
|
|
where this HPR implementation resides. If this object has
|
|
the same value as the appnNodeCpName object in the APPN MIB,
|
|
then the two objects are referring to the same APPN node."
|
|
::= { hprGlobal 1 }
|
|
|
|
hprOperatorPathSwitchSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSupported(1),
|
|
switchTriggerSupported(2),
|
|
switchToPathSupported(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates an implementation's level of support
|
|
for an operator-requested path switch.
|
|
|
|
notSupported(1) - the agent does not support
|
|
operator-requested path switches
|
|
switchTriggerSupported(2) - the agent supports a 'switch
|
|
path now' command from an
|
|
operator, but not a command to
|
|
switch to a specified path
|
|
switchToPathSupported(3) - the agent supports both a
|
|
'switch path now' command and a
|
|
command to switch to a specified
|
|
path. Note that the latter
|
|
command is not available via
|
|
this MIB; a system that supports
|
|
it must do so via other means,
|
|
such as a local operator
|
|
interface."
|
|
::= { hprGlobal 2 }
|
|
|
|
-- *********************************************************************
|
|
|
|
hprAnrRouting OBJECT IDENTIFIER ::= { hprObjects 2 }
|
|
-- *********************************************************************
|
|
|
|
hprAnrsAssigned OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "ANR labels"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of ANR labels assigned by this node since it was
|
|
last re-initialized. A Management Station can detect
|
|
discontinuities in this counter by monitoring the
|
|
appnNodeCounterDisconTime object in the APPN MIB."
|
|
::= { hprAnrRouting 1 }
|
|
|
|
hprAnrCounterState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for a network management station to turn
|
|
on/off the counting of ANR packets in the hprAnrRoutingTable.
|
|
The initial value of this object is an implementation choice.
|
|
|
|
notActive(1) - the counter hprAnrPacketsReceived
|
|
returns no meaningful value
|
|
active(2) - the counter hprAnrPacketsReceived is
|
|
being incremented and is returning
|
|
meaningful values"
|
|
::= { hprAnrRouting 2 }
|
|
|
|
hprAnrCounterStateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the hprAnrCounterState object last changed its
|
|
value. The initial value returned by this object is the time
|
|
at which the APPN node instrumented with this MIB was last
|
|
brought up."
|
|
::= { hprAnrRouting 3 }
|
|
|
|
hprAnrRoutingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HprAnrRoutingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ANR Routing table provides a means of correlating an
|
|
incoming ANR label (i.e., one assigned by this node) with the
|
|
TG over which a packet containing the label will be forwarded.
|
|
When the ANR label identifies a local NCE, the hprAnrOutTgDest
|
|
and hprAnrOutTgNum objects have no meaning. The table also
|
|
contains an object to count the number of packets received
|
|
with a given ANR label."
|
|
::= { hprAnrRouting 4 }
|
|
|
|
hprAnrRoutingEntry OBJECT-TYPE
|
|
SYNTAX HprAnrRoutingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ANR label is used to index this table."
|
|
INDEX { hprAnrLabel }
|
|
::= { hprAnrRoutingTable 1 }
|
|
|
|
HprAnrRoutingEntry ::= SEQUENCE {
|
|
hprAnrLabel OCTET STRING,
|
|
hprAnrType INTEGER,
|
|
hprAnrOutTgDest DisplayString,
|
|
hprAnrOutTgNum INTEGER,
|
|
hprAnrPacketsReceived Counter32,
|
|
hprAnrCounterDisconTime TimeStamp
|
|
}
|
|
|
|
hprAnrLabel OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first ANR label in an incoming packet."
|
|
::= { hprAnrRoutingEntry 1 }
|
|
|
|
hprAnrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nce(1),
|
|
tg(2)
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An object indicating whether an ANR label assigned by this
|
|
node identifies a local NCE or a TG on which outgoing packets
|
|
are forwarded.
|
|
|
|
nce(1) - the ANR label identifies a local NCE. In this
|
|
case the hprAnrOutTgDest and hprAnrOutTgNum
|
|
objects have no meaning.
|
|
tg(2) - the ANR label identifies a TG."
|
|
::= { hprAnrRoutingEntry 2 }
|
|
|
|
hprAnrOutTgDest OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0 | 3..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Destination node for the TG over which packets with this ANR
|
|
label are forwarded. This is the fully qualified name of an
|
|
APPN network node or end node, formatted according to the
|
|
SnaControlPointName textual convention. If the ANR label
|
|
identifies a local NCE, then this object returns a zero-length
|
|
string.
|
|
|
|
This object corresponds to the appnLocalTgDest object in the
|
|
APPN MIB."
|
|
::= { hprAnrRoutingEntry 3 }
|
|
|
|
hprAnrOutTgNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of the TG over which packets with this ANR label are
|
|
forwarded. If the ANR label identifies a local NCE, then this
|
|
object returns the value 0, since 0 is not a valid TG number
|
|
for a TG that supports HPR.
|
|
|
|
This object corresponds to the appnLocalTgNum object in the
|
|
APPN MIB."
|
|
::= { hprAnrRoutingEntry 4 }
|
|
|
|
hprAnrPacketsReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "ANR packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of packets received with this ANR label as their
|
|
first label.
|
|
|
|
A Management Station can detect discontinuities in this
|
|
counter by monitoring the hprAnrCounterDisconTime object in
|
|
the same row."
|
|
::= { hprAnrRoutingEntry 5 }
|
|
|
|
hprAnrCounterDisconTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the sysUpTime object when the
|
|
hprAnrPacketsReceived counter for this ANR label last
|
|
experienced a discontinuity. This will be the more recent of
|
|
two times: the time at which the ANR label was associated with
|
|
either an outgoing TG or a local NCE, or the time at which the
|
|
ANR counters were last turned on or off."
|
|
::= { hprAnrRoutingEntry 6 }
|
|
|
|
-- *********************************************************************
|
|
hprTransportUser OBJECT IDENTIFIER ::= { hprObjects 3 }
|
|
-- *********************************************************************
|
|
-- Transport Service User (TU) Table: (RTP Connection Users)
|
|
--
|
|
-- There will be several users of the HPR transport and each HPR node
|
|
-- shall maintain a table of these users.
|
|
-- *********************************************************************
|
|
|
|
hprNceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HprNceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Network Connection Endpoint (NCE) table."
|
|
::= { hprTransportUser 1 }
|
|
|
|
hprNceEntry OBJECT-TYPE
|
|
SYNTAX HprNceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NCE ID is used to index this table."
|
|
INDEX { hprNceId }
|
|
::= { hprNceTable 1 }
|
|
|
|
HprNceEntry ::= SEQUENCE {
|
|
hprNceId OCTET STRING,
|
|
hprNceType HprNceTypes,
|
|
hprNceDefault HprNceTypes,
|
|
hprNceInstanceId OCTET STRING
|
|
}
|
|
|
|
hprNceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Network Connection Endpoint (NCE) ID. NCEs identify
|
|
Control Points (Cp), Logical Units (Lu), HPR Boundary
|
|
Functions (Bf) and Route Setup (Rs) Functions. A value for
|
|
this object can be retrieved from any of the following
|
|
objects in the APPN MIB:
|
|
|
|
- appnLsCpCpNceId
|
|
- appnLsRouteNceId
|
|
- appnLsBfNceId
|
|
- appnIsInRtpNceId
|
|
- appnIsRtpNceId
|
|
|
|
In each case this value identifies a row in this table
|
|
containing information related to that in the APPN MIB."
|
|
::= { hprNceEntry 1 }
|
|
|
|
hprNceType OBJECT-TYPE
|
|
SYNTAX HprNceTypes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit string identifying the function types provided by this
|
|
Network Connection Endpoint (NCE)."
|
|
::= { hprNceEntry 2 }
|
|
|
|
hprNceDefault OBJECT-TYPE
|
|
SYNTAX HprNceTypes
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit string identifying the function types for which this
|
|
Network Connection Endpoint (NCE) is the default NCE. While
|
|
default NCEs are not explicitly defined in the architecture,
|
|
some implementations provide them; for such implementations,
|
|
it is useful to make this information available to a
|
|
Management Station."
|
|
::= { hprNceEntry 3 }
|
|
|
|
hprNceInstanceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (4))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NCE instance identifier (NCEII) identifying the current
|
|
instance of this NCE. An NCEII is used to denote different
|
|
instances (IPLs) of an NCE component. Each time an NCE is
|
|
activated (IPL'd), it acquires a different, unique NCEII."
|
|
::= { hprNceEntry 4 }
|
|
|
|
-- *********************************************************************
|
|
hprRtp OBJECT IDENTIFIER ::= { hprObjects 4 }
|
|
-- *********************************************************************
|
|
-- *********************************************************************
|
|
--
|
|
-- The RTP group is implemented by all managed nodes supporting the
|
|
-- HPR Transport Tower. The group contains several scalars (simple
|
|
-- objects) and a table.
|
|
-- *********************************************************************
|
|
|
|
-- *********************************************************************
|
|
hprRtpGlobe OBJECT IDENTIFIER ::= { hprRtp 1}
|
|
-- *********************************************************************
|
|
hprRtpGlobeConnSetups OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "RTP connection setups"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of RTP connection setups in which this node has
|
|
participated, as either sender or receiver, since it was last
|
|
re-initialized. Retries of a setup attempt do not cause the
|
|
|
|
counter to be incremented.
|
|
|
|
A Management Station can detect discontinuities in this
|
|
counter by monitoring the appnNodeCounterDisconTime object
|
|
in the APPN MIB."
|
|
::= { hprRtpGlobe 1 }
|
|
|
|
hprRtpGlobeCtrState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notActive(1),
|
|
active(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allows a network management station to turn the
|
|
counters in the hprRtpTable on and off. The initial value of
|
|
this object is an implementation choice.
|
|
|
|
notActive(1) - the counters in the hprRtpTable are
|
|
returning no meaningful values
|
|
active(2) - the counters in the hprRtpTable are
|
|
being incremented and are returning
|
|
meaningful values"
|
|
::= { hprRtpGlobe 2 }
|
|
|
|
hprRtpGlobeCtrStateTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the value of the hprRtpGlobeCtrState object
|
|
last changed. The initial value returned by this object is
|
|
the time at which the APPN node instrumented with this MIB
|
|
was last brought up."
|
|
::= { hprRtpGlobe 3 }
|
|
|
|
-- *********************************************************************
|
|
-- The RTP Connection Table
|
|
-- There may be many RTP connections on a node supporting the functions
|
|
-- specified in the RTP option set. Each node implementing this option
|
|
-- set shall maintain a table of these RTP connections.
|
|
-- *********************************************************************
|
|
|
|
hprRtpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HprRtpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The RTP Connection table"
|
|
::= { hprRtp 2 }
|
|
|
|
hprRtpEntry OBJECT-TYPE
|
|
SYNTAX HprRtpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local NCE ID and local TCID are used to index this
|
|
table."
|
|
INDEX
|
|
{ hprRtpLocNceId,
|
|
hprRtpLocTcid }
|
|
::= { hprRtpTable 1 }
|
|
|
|
HprRtpEntry ::= SEQUENCE {
|
|
hprRtpLocNceId OCTET STRING, -- local nce id
|
|
hprRtpLocTcid OCTET STRING, -- local tcid
|
|
hprRtpRemCpName SnaControlPointName,-- remote cp name
|
|
hprRtpRemNceId OCTET STRING, -- remote nce id
|
|
hprRtpRemTcid OCTET STRING, -- remote tcid
|
|
hprRtpPathSwitchTrigger INTEGER, -- trigger (read-write)
|
|
hprRtpRscv OCTET STRING, -- rscv
|
|
hprRtpTopic DisplayString, -- topic (cos)
|
|
hprRtpState INTEGER, -- state
|
|
hprRtpUpTime TimeTicks, -- up time
|
|
|
|
hprRtpLivenessTimer Unsigned32, -- liveness timer
|
|
hprRtpShortReqTimer Unsigned32, -- short request timer
|
|
hprRtpPathSwTimer Unsigned32, -- path switch timer
|
|
hprRtpLivenessTimeouts HprRtpCounter, -- liveness timeouts
|
|
hprRtpShortReqTimeouts HprRtpCounter, -- short req timeouts
|
|
|
|
hprRtpMaxSendRate Gauge32, -- maximum send rate
|
|
hprRtpMinSendRate Gauge32, -- minimum send rate
|
|
hprRtpCurSendRate Gauge32, -- current send rate
|
|
|
|
hprRtpSmRdTripDelay Gauge32, -- smooth rnd trip
|
|
delay
|
|
|
|
hprRtpSendPackets HprRtpCounter, -- packets sent
|
|
|
|
hprRtpRecvPackets HprRtpCounter, -- packets received
|
|
hprRtpSendBytes HprRtpCounter, -- bytes sent
|
|
hprRtpRecvBytes HprRtpCounter, -- bytes received
|
|
|
|
hprRtpRetrPackets HprRtpCounter, -- pkts re-xmitted
|
|
hprRtpPacketsDiscarded HprRtpCounter, -- pkts discarded
|
|
hprRtpDetectGaps HprRtpCounter, -- gaps detected
|
|
hprRtpRateReqSends HprRtpCounter, -- rate req send
|
|
|
|
hprRtpOkErrPathSws HprRtpCounter, -- ok err path sws
|
|
hprRtpBadErrPathSws HprRtpCounter, -- bad err path sws
|
|
hprRtpOkOpPathSws HprRtpCounter, -- ok op path sws
|
|
hprRtpBadOpPathSws HprRtpCounter, -- bad op path sws
|
|
|
|
hprRtpCounterDisconTime TimeStamp -- discontinuity ind
|
|
}
|
|
|
|
hprRtpLocNceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local Network Connection Endpoint (NCE) ID of this RTP
|
|
connection. NCEs identify CPs, LUs, Boundary Functions (BFs),
|
|
and Route Setup (RS) components. A value for this object can
|
|
be retrieved from any of the following objects in the APPN
|
|
MIB:
|
|
|
|
- appnLsCpCpNceId
|
|
- appnLsRouteNceId
|
|
- appnLsBfNceId
|
|
- appnIsInRtpNceId
|
|
- appnIsRtpNceId
|
|
|
|
In each case this value identifies a row in this table
|
|
containing information related to that in the APPN MIB."
|
|
::= { hprRtpEntry 1 }
|
|
|
|
hprRtpLocTcid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local TCID of this RTP connection. A value for this
|
|
object can be retrieved from either the appnIsInRtpTcid object
|
|
or the appnIsRtpTcid object the APPN MIB; in each case this
|
|
value identifies a row in this table containing information
|
|
|
|
related to that in the APPN MIB."
|
|
::= { hprRtpEntry 2 }
|
|
|
|
hprRtpRemCpName OBJECT-TYPE
|
|
SYNTAX SnaControlPointName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively assigned network name for the remote node of
|
|
this RTP connection."
|
|
::= { hprRtpEntry 3 }
|
|
|
|
hprRtpRemNceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote Network Connection Endpoint (NCE) of this RTP
|
|
connection. NCEs identify CPs, LUs, Boundary Functions (BFs),
|
|
and Route Setup (RS) components."
|
|
::= { hprRtpEntry 4 }
|
|
|
|
hprRtpRemTcid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote TCID of this RTP connection."
|
|
::= { hprRtpEntry 5 }
|
|
|
|
hprRtpPathSwitchTrigger OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ready(1),
|
|
switchPathNow(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Object by which a Management Station can trigger an operator-
|
|
requested path switch, by setting the value to
|
|
switchPathNow(2). Setting this object to switchPathNow(2)
|
|
triggers a path switch even if its previous value was already
|
|
switchPathNow(2).
|
|
|
|
The value ready(1) is returned on GET operations until a SET
|
|
has been processed; after that the value received on the most
|
|
recent SET is returned.
|
|
|
|
This MIB module provides no support for an operator-requested
|
|
switch to a specified path."
|
|
::= { hprRtpEntry 6 }
|
|
|
|
hprRtpRscv OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The forward Route Selection Control Vector for this RTP
|
|
connection. The format of this vector is described in SNA
|
|
Formats.
|
|
|
|
The value returned in this object during a path switch is
|
|
implementation-dependent: it may be the old path, the new
|
|
path, a zero-length string, or some other valid RSCV string."
|
|
::= { hprRtpEntry 7 }
|
|
|
|
hprRtpTopic OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The topic for this RTP connection. This is used to indicate
|
|
the Class of Service."
|
|
::= { hprRtpEntry 8 }
|
|
|
|
hprRtpState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rtpListening(1),
|
|
rtpCalling(2),
|
|
rtpConnected(3),
|
|
rtpPathSwitching(4),
|
|
rtpDisconnecting(5),
|
|
other(99)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the RTP connection, from the perspective of the
|
|
local RTP protocol machine:
|
|
|
|
rtpListening - connection open; waiting for other end
|
|
to call in
|
|
rtpCalling - connection opened, attempting to call
|
|
out, have not yet received any data
|
|
from other end
|
|
rtpConnected - connection is active; responded to a
|
|
call-in or received other end's TCID
|
|
from a call-out attempt
|
|
rtpPathSwitching - the path switch timer is running;
|
|
attempting to find a new path for this
|
|
connection.
|
|
rtpDisconnecting - no sessions are using this connection;
|
|
in process of bringing it down
|
|
other - the connection is not in any of the
|
|
states listed above."
|
|
::= { hprRtpEntry 9 }
|
|
|
|
hprRtpUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
UNITS "1/100ths of a second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time the RTP connection has been up, measured
|
|
in 1/100ths of a second."
|
|
::= { hprRtpEntry 10 }
|
|
|
|
hprRtpLivenessTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "1/100ths of a second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the liveness (ALIVE) timer of this RTP
|
|
connection, in units of 1/100th of a second. When this timer
|
|
expires and no packet has arrived from the partner since it
|
|
was last set, packets with Status Request indicators will be
|
|
sent to see if the RTP connection is still alive."
|
|
::= { hprRtpEntry 11 }
|
|
|
|
hprRtpShortReqTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "1/100ths of a second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the RTP SHORT_REQ timer, in units of 1/100 of a
|
|
second. This timer represents the maximum time that a sender
|
|
waits for a reply from a receiver."
|
|
::= { hprRtpEntry 12 }
|
|
|
|
hprRtpPathSwTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "1/100ths of a second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of time that RTP should attempt a path switch
|
|
for a connection, in units of 1/100th of a second."
|
|
::= { hprRtpEntry 13 }
|
|
|
|
hprRtpLivenessTimeouts OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "liveness timeouts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of liveness timeouts for this RTP connection."
|
|
::= { hprRtpEntry 14 }
|
|
|
|
hprRtpShortReqTimeouts OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "short request timeouts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of short request timeouts for this RTP connection."
|
|
::= { hprRtpEntry 15 }
|
|
|
|
hprRtpMaxSendRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bytes per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high-water mark for this RTP connection's send rate, in
|
|
units of bytes per second. This is the high-water mark for
|
|
the entire life of the connection, not just the high-water
|
|
mark for the connection's current path.
|
|
|
|
For more details on this and other parameters related to HPR,
|
|
see the High Performance Routing Architecture Reference."
|
|
::= { hprRtpEntry 16 }
|
|
|
|
hprRtpMinSendRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bytes per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low-water mark for this RTP connection's send rate, in
|
|
units of bytes per second. This is the low-water mark for the
|
|
entire life of the connection, not just the low-water mark for
|
|
the connection's current path.
|
|
|
|
For more details on this and other parameters related to HPR,
|
|
see the High Performance Routing Architecture Reference."
|
|
::= { hprRtpEntry 17 }
|
|
|
|
hprRtpCurSendRate OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "bytes per second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current send rate for this RTP connection, in units of
|
|
bytes per second.
|
|
|
|
For more details on this and other parameters related to HPR,
|
|
see the High Performance Routing Architecture Reference."
|
|
::= { hprRtpEntry 18 }
|
|
|
|
hprRtpSmRdTripDelay OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
UNITS "1/1000ths of a second"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The smoothed round trip delay for this RTP connection, in
|
|
units of 1/1000th of a second (ms).
|
|
|
|
For more details on this and other parameters related to HPR,
|
|
see the High Performance Routing Architecture Reference."
|
|
::= { hprRtpEntry 19 }
|
|
|
|
hprRtpSendPackets OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "RTP packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of packets successfully sent on this RTP
|
|
connection."
|
|
::= { hprRtpEntry 20 }
|
|
|
|
hprRtpRecvPackets OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "RTP packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of packets received on this RTP connection. The
|
|
counter is incremented only once if duplicate copies of a
|
|
packet are received."
|
|
::= { hprRtpEntry 21 }
|
|
|
|
hprRtpSendBytes OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of bytes sent on this RTP connection. Both RTP
|
|
Transport Header (THDR) bytes and data bytes are included in
|
|
this count."
|
|
::= { hprRtpEntry 22 }
|
|
|
|
hprRtpRecvBytes OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of bytes received on this RTP connection. Both RTP
|
|
Transport Header (THDR) bytes and data bytes are included in
|
|
this count."
|
|
::= { hprRtpEntry 23 }
|
|
|
|
hprRtpRetrPackets OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "RTP packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of packets retransmitted on this RTP connection."
|
|
::= { hprRtpEntry 24 }
|
|
|
|
hprRtpPacketsDiscarded OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "RTP packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of packets received on this RTP connection and then
|
|
discarded. A packet may be discarded because it is determined
|
|
to be a duplicate, or for other reasons."
|
|
::= { hprRtpEntry 25 }
|
|
|
|
hprRtpDetectGaps OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "gaps"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of gaps detected on this RTP connection."
|
|
::= { hprRtpEntry 26 }
|
|
|
|
hprRtpRateReqSends OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "rate requests"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of Rate Requests sent on this RTP connection."
|
|
::= { hprRtpEntry 27 }
|
|
|
|
hprRtpOkErrPathSws OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "path switch attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of successful path switch attempts for this RTP
|
|
|
|
connection due to errors."
|
|
::= { hprRtpEntry 28 }
|
|
|
|
hprRtpBadErrPathSws OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "path switch attempts"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of unsuccessful path switches for this RTP
|
|
connection due to errors."
|
|
::= { hprRtpEntry 29 }
|
|
|
|
hprRtpOkOpPathSws OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "path switches"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of successful path switches for this RTP connection
|
|
due to operator requests."
|
|
::= { hprRtpEntry 30 }
|
|
|
|
hprRtpBadOpPathSws OBJECT-TYPE
|
|
SYNTAX HprRtpCounter
|
|
UNITS "path switches"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The count of unsuccessful path switches for this RTP
|
|
connection due to operator requests. This counter is not
|
|
incremented by an implementation that does not support
|
|
operator-requested path switches, even if a Management Station
|
|
requests such a path switch by setting the
|
|
hprRtpPathSwitchTrigger object."
|
|
::= { hprRtpEntry 31 }
|
|
|
|
hprRtpCounterDisconTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the sysUpTime object when the counters for this
|
|
RTP connection last experienced a discontinuity. This will be
|
|
|
|
the more recent of two times: the time at which the
|
|
connection was established or the time at which the HPR
|
|
counters were last turned on or off."
|
|
::= { hprRtpEntry 32 }
|
|
|
|
-- *********************************************************************
|
|
-- The RTP Connection Status Table
|
|
-- This table contains statistics and historical information related to
|
|
-- both successful and unsuccessful RTP path switches. This
|
|
-- information can be important for both trend analysis and problem
|
|
-- determination.
|
|
--
|
|
-- Note the terminology here: when RTP is triggered to find a new path
|
|
-- for a connection, this initiates a 'path switch,' which will end up
|
|
-- being either successful or unsuccessful. During this path switch,
|
|
-- RTP will make one or more 'path switch attempts,' which are attempts
|
|
-- to find a new path for the connection and switch the connection to
|
|
-- it. This 'new' path may be the same path that the connection was
|
|
-- using before the path switch.
|
|
--
|
|
-- It is an implementation option how many entries to keep in this
|
|
-- table, and how long to retain any individual entry.
|
|
-- *********************************************************************
|
|
hprRtpStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HprRtpStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"RTP Connection Status Table: This table contains historical
|
|
information on RTP connections. An entry is created in this
|
|
table when a path switch is completed, either successfully or
|
|
unsuccessfully."
|
|
::= { hprRtp 3 }
|
|
|
|
hprRtpStatusEntry OBJECT-TYPE
|
|
SYNTAX HprRtpStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is indexed by local NCE ID, local TCID, and an
|
|
integer hprRtpStatusIndex. Thus the primary grouping of table
|
|
rows is by RTP connection, with the multiple entries for a
|
|
given RTP connection ordered by time."
|
|
INDEX
|
|
{ hprRtpStatusLocNceId,
|
|
hprRtpStatusLocTcid,
|
|
hprRtpStatusIndex }
|
|
::= { hprRtpStatusTable 1 }
|
|
|
|
HprRtpStatusEntry ::= SEQUENCE {
|
|
hprRtpStatusLocNceId OCTET STRING, -- local nce id
|
|
hprRtpStatusLocTcid OCTET STRING, -- local tcid
|
|
hprRtpStatusIndex Unsigned32, -- index
|
|
hprRtpStatusStartTime DateAndTime, -- time stamp
|
|
hprRtpStatusEndTime DateAndTime, -- time stamp
|
|
hprRtpStatusRemCpName SnaControlPointName,-- remote cp name
|
|
hprRtpStatusRemNceId OCTET STRING, -- remote nce id
|
|
hprRtpStatusRemTcid OCTET STRING, -- remote tcid
|
|
hprRtpStatusNewRscv OCTET STRING, -- new rscv
|
|
hprRtpStatusOldRscv OCTET STRING, -- old rscv
|
|
hprRtpStatusCause INTEGER, -- cause
|
|
hprRtpStatusLastAttemptResult INTEGER -- result of last
|
|
}
|
|
|
|
hprRtpStatusLocNceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local Network Connection Endpoint (NCE) of this RTP
|
|
connection. NCEs identify CPs, LUs, Boundary Functions (BFs),
|
|
and Route Setup (RS) components."
|
|
::= { hprRtpStatusEntry 1 }
|
|
|
|
hprRtpStatusLocTcid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local TCID of this RTP connection."
|
|
::= { hprRtpStatusEntry 2 }
|
|
|
|
hprRtpStatusIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table index. This value begins at one and is incremented
|
|
when a new entry is added to the table. It is an
|
|
implementation choice whether to run a single counter for
|
|
|
|
all entries in the table, or to run a separate counter for
|
|
the entries for each RTP connection. In the unlikely event
|
|
of a wrap, it is assumed that Management Stations will have
|
|
the ability to order table entries correctly."
|
|
::= { hprRtpStatusEntry 3 }
|
|
|
|
hprRtpStatusStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the path switch began."
|
|
::= { hprRtpStatusEntry 4 }
|
|
|
|
hprRtpStatusEndTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the path switch was ended, either successfully
|
|
or unsuccessfully."
|
|
::= { hprRtpStatusEntry 5 }
|
|
|
|
hprRtpStatusRemCpName OBJECT-TYPE
|
|
SYNTAX SnaControlPointName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively assigned network name for the remote node of
|
|
this RTP connection."
|
|
::= { hprRtpStatusEntry 6 }
|
|
|
|
hprRtpStatusRemNceId OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote Network Connection Endpoint (NCE) of this RTP
|
|
connection. NCEs identify CPs, LUs, Boundary Functions (BFs),
|
|
and Route Setup (RS) components."
|
|
::= { hprRtpStatusEntry 7 }
|
|
|
|
hprRtpStatusRemTcid OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (8))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote TCID of this RTP connection."
|
|
::= { hprRtpStatusEntry 8 }
|
|
|
|
hprRtpStatusNewRscv OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The new Route Selection Control Vector for this RTP
|
|
connection. A zero-length string indicates that no value is
|
|
available, perhaps because the implementation does not save
|
|
RSCVs."
|
|
::= { hprRtpStatusEntry 9 }
|
|
|
|
hprRtpStatusOldRscv OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The old Route Selection Control Vector for this RTP
|
|
connection. A zero-length string indicates that no value is
|
|
available, perhaps because the implementation does not save
|
|
RSCVs."
|
|
::= { hprRtpStatusEntry 10 }
|
|
|
|
hprRtpStatusCause OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
rtpConnFail(2),
|
|
locLinkFail(3),
|
|
remLinkFail(4),
|
|
operRequest(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the path switch:
|
|
|
|
other(1) - Reason other than those listed below,
|
|
rtpConnFail(2) - RTP connection failure detected,
|
|
locLinkFail(3) - Local link failure,
|
|
remLinkFail(4) - Remote link failure (learned from TDUs),
|
|
operRequest(5) - Operator requested path switch. "
|
|
::= { hprRtpStatusEntry 11 }
|
|
|
|
hprRtpStatusLastAttemptResult OBJECT-TYPE
|
|
SYNTAX INTEGER { successful(1),
|
|
initiatorMoving(2),
|
|
directorySearchFailed(3),
|
|
rscvCalculationFailed(4),
|
|
negativeRouteSetupReply(5),
|
|
backoutRouteSetupReply(6),
|
|
timeoutDuringFirstAttempt(7),
|
|
otherUnsuccessful(8)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the last completed path switch attempt. If the
|
|
path switch is aborted in the middle of a path switch attempt
|
|
because the path switch timer expires, the result of the
|
|
previous path switch attempt is reported.
|
|
|
|
The values are defined as follows:
|
|
|
|
successful(1) - The final path switch
|
|
attempt was successful.
|
|
initiatorMoving(2) - The final path switch
|
|
attempt failed because the
|
|
initiator is mobile, and
|
|
there was no active link
|
|
out of this node.
|
|
directorySearchFailed(3) - The final path switch
|
|
attempt failed because a
|
|
directory search for the
|
|
destination node's CP name
|
|
failed.
|
|
rscvCalculationFailed(4) - The final path switch
|
|
attempt failed because an
|
|
RSCV to the node containing
|
|
the remote RTP endpoint
|
|
could not be calculated.
|
|
negativeRouteSetupReply(5) - The final path switch
|
|
attempt failed because route
|
|
setup failed for the new
|
|
path.
|
|
backoutRouteSetupReply(6) - The final path switch
|
|
attempt failed because the
|
|
|
|
remote RTP endpoint refused
|
|
to continue the RTP
|
|
connection.
|
|
timeoutDuringFirstAttempt(7) - The path switch timer
|
|
expired during the first
|
|
path switch attempt.
|
|
otherUnsuccessful(8) - The final path switch
|
|
attempt failed for a reason
|
|
other than those listed
|
|
above."
|
|
::= { hprRtpStatusEntry 12 }
|
|
|
|
-- ***************************************************************
|
|
-- Conformance information
|
|
-- ***************************************************************
|
|
|
|
hprConformance OBJECT IDENTIFIER ::= { hprMIB 2 }
|
|
|
|
hprCompliances OBJECT IDENTIFIER ::= { hprConformance 1 }
|
|
hprGroups OBJECT IDENTIFIER ::= { hprConformance 2 }
|
|
|
|
-- Compliance statements
|
|
|
|
hprCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMPv2 entities that
|
|
implement the HPR MIB."
|
|
|
|
MODULE -- this module
|
|
|
|
-- Unconditionally mandatory groups
|
|
MANDATORY-GROUPS {
|
|
hprGlobalConfGroup,
|
|
hprAnrRoutingConfGroup,
|
|
hprTransportUserConfGroup
|
|
}
|
|
|
|
-- Conditionally mandatory groups
|
|
GROUP hprRtpConfGroup
|
|
DESCRIPTION
|
|
"The hprRtpConfGroup is mandatory for HPR implementations
|
|
supporting the HPR transport tower."
|
|
::= { hprCompliances 1 }
|
|
|
|
-- Units of conformance
|
|
hprGlobalConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hprNodeCpName,
|
|
hprOperatorPathSwitchSupport
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation of HPR
|
|
general information and capabilities."
|
|
::= { hprGroups 1 }
|
|
|
|
hprAnrRoutingConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hprAnrsAssigned,
|
|
hprAnrCounterState,
|
|
hprAnrCounterStateTime,
|
|
hprAnrType,
|
|
hprAnrOutTgDest,
|
|
hprAnrOutTgNum,
|
|
hprAnrPacketsReceived,
|
|
hprAnrCounterDisconTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing instrumentation for the
|
|
node's ANR routing."
|
|
::= { hprGroups 2 }
|
|
|
|
hprTransportUserConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hprNceType,
|
|
hprNceDefault,
|
|
hprNceInstanceId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information on the users of
|
|
the HPR transport known to the node."
|
|
::= { hprGroups 3 }
|
|
|
|
hprRtpConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
hprRtpGlobeConnSetups,
|
|
hprRtpGlobeCtrState,
|
|
hprRtpGlobeCtrStateTime,
|
|
hprRtpRemCpName,
|
|
hprRtpRemNceId,
|
|
hprRtpRemTcid,
|
|
hprRtpPathSwitchTrigger,
|
|
hprRtpRscv,
|
|
hprRtpTopic,
|
|
hprRtpState,
|
|
hprRtpUpTime,
|
|
hprRtpLivenessTimer,
|
|
hprRtpShortReqTimer,
|
|
hprRtpPathSwTimer,
|
|
hprRtpLivenessTimeouts,
|
|
hprRtpShortReqTimeouts,
|
|
hprRtpMaxSendRate,
|
|
hprRtpMinSendRate,
|
|
hprRtpCurSendRate,
|
|
hprRtpSmRdTripDelay,
|
|
hprRtpSendPackets,
|
|
hprRtpRecvPackets,
|
|
hprRtpSendBytes,
|
|
hprRtpRecvBytes,
|
|
hprRtpRetrPackets,
|
|
hprRtpPacketsDiscarded,
|
|
hprRtpDetectGaps,
|
|
hprRtpRateReqSends,
|
|
hprRtpOkErrPathSws,
|
|
hprRtpBadErrPathSws,
|
|
hprRtpOkOpPathSws,
|
|
hprRtpBadOpPathSws,
|
|
hprRtpCounterDisconTime,
|
|
hprRtpStatusStartTime,
|
|
hprRtpStatusEndTime,
|
|
hprRtpStatusRemNceId,
|
|
hprRtpStatusRemTcid,
|
|
hprRtpStatusRemCpName,
|
|
hprRtpStatusNewRscv,
|
|
hprRtpStatusOldRscv,
|
|
hprRtpStatusCause,
|
|
hprRtpStatusLastAttemptResult
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the instrumentation for RTP
|
|
connection end points."
|
|
::= { hprGroups 4 }
|
|
|
|
-- end of conformance statement
|
|
|
|
END
|