892 lines
30 KiB
Plaintext
892 lines
30 KiB
Plaintext
--MibName=rcMvr
|
|
-- *****************************************************************
|
|
-- switch-mvr-mib.mib: Raisecom MVR MIB file
|
|
--
|
|
-- May 2005, zhaohongce
|
|
--
|
|
-- Copyright (c) 1994-2000, 2001 by Raisecom, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
|
|
SWITCH-MVR-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Integer32 FROM SNMPv2-SMI
|
|
RowStatus,TruthValue FROM SNMPv2-TC
|
|
PortList, Vlanset, EnableVar FROM SWITCH-TC
|
|
|
|
iscomSwitch FROM RAISECOM-BASE-MIB;
|
|
|
|
rcMvr MODULE-IDENTITY
|
|
LAST-UPDATED "0506200000Z"
|
|
ORGANIZATION "raisecom Group"
|
|
CONTACT-INFO
|
|
" Raise Systems
|
|
|
|
Postal: Beijing,
|
|
China
|
|
|
|
Tel: 86-010-82884499
|
|
|
|
E-mail: zhaohongce@raisecom.com"
|
|
DESCRIPTION
|
|
"The MIB module for MVR and igmp filter."
|
|
::= { iscomSwitch 21}
|
|
|
|
------------------------------------------------------------------------------
|
|
--
|
|
-- rcMvr - IGMP filter and MVR Parameters
|
|
--
|
|
-- This group is used to instrument the Layer 2 IGMP filter and MVR support.
|
|
--
|
|
------------------------------------------------------------------------------
|
|
------------------------------------------------------------------------------
|
|
rcMvrConfig OBJECT IDENTIFIER ::= { rcMvr 1 }
|
|
rcIgmpFilterConfig OBJECT IDENTIFIER ::= { rcMvr 2 }
|
|
|
|
------------------------------------------------------------------------------
|
|
--
|
|
-- MVR Config Group
|
|
--
|
|
|
|
rcMvrEnable OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls whether the MVR is enabled
|
|
on the device. A disable(2) value will prevent the
|
|
MVR on the device."
|
|
DEFVAL { disable }
|
|
::= { rcMvrConfig 1 }
|
|
|
|
rcMvrVlan OBJECT-TYPE
|
|
SYNTAX Vlanset
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the multicast VLAN ID, which is connected to multicast router."
|
|
::= { rcMvrConfig 2 }
|
|
|
|
rcMvrMaxGroups OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum MVR multicast groups supported by
|
|
this device."
|
|
::= { rcMvrConfig 3 }
|
|
|
|
rcMvrCurrentGroups OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the current MVR multicast groups configured by user."
|
|
::= { rcMvrConfig 4 }
|
|
|
|
rcMvrQureyTime OBJECT-TYPE
|
|
SYNTAX INTEGER (60..36000)
|
|
UNITS "tenths of second"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the MVR entry will be timeout if no REPORT packet
|
|
received after the time."
|
|
DEFVAL {600}
|
|
::= { rcMvrConfig 5 }
|
|
|
|
rcMvrOperMode OBJECT-TYPE
|
|
SYNTAX INTEGER {dynamic(1),compatible(2)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the MVR operate mode. A value of dynamic(1) Indicates the uplink
|
|
port will initiatively send JOIN packet to the multicast group, compatible(2)
|
|
indicates the join action is determined by user hosts."
|
|
DEFVAL { compatible }
|
|
::= { rcMvrConfig 6 }
|
|
|
|
rcMvrGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMvrGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries that identify lists of
|
|
IP Multicast groups configured on the device. "
|
|
::= { rcMvrConfig 7 }
|
|
|
|
rcMvrGroupEntry OBJECT-TYPE
|
|
SYNTAX RcMvrGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcMvrGroupTable.
|
|
The entry identify the IP multicast groups which user want to receive."
|
|
INDEX { rcMvrGroupVlan, rcMvrGroupAddress }
|
|
::= { rcMvrGroupTable 1 }
|
|
|
|
RcMvrGroupEntry ::=
|
|
SEQUENCE {
|
|
rcMvrGroupVlan INTEGER,
|
|
rcMvrGroupAddress IpAddress,
|
|
rcMvrGroupRowStatus RowStatus
|
|
}
|
|
|
|
rcMvrGroupVlan OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index identifying this entry.
|
|
the multicast vlan of this groups which user want to receive."
|
|
::= { rcMvrGroupEntry 1 }
|
|
|
|
rcMvrGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index identifying this entry.
|
|
the IP multicast groups which user want to receive."
|
|
::= { rcMvrGroupEntry 2 }
|
|
|
|
rcMvrGroupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of this entry."
|
|
::= { rcMvrGroupEntry 3 }
|
|
|
|
--
|
|
-- MVR Information Group
|
|
--
|
|
|
|
rcMvrIFTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMvrIFEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries that identify the configured MVR
|
|
information for each port."
|
|
::= { rcMvrConfig 8 }
|
|
|
|
rcMvrIFEntry OBJECT-TYPE
|
|
SYNTAX RcMvrIFEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcMvrGroupTable.
|
|
The entry identify the configured MVR
|
|
information for the port."
|
|
INDEX { rcMvrPortIndex }
|
|
::= { rcMvrIFTable 1 }
|
|
|
|
RcMvrIFEntry ::=
|
|
SEQUENCE {
|
|
rcMvrPortIndex INTEGER,
|
|
rcMvrPortEnable TruthValue,
|
|
rcMvrType INTEGER,
|
|
rcMvrImmediate EnableVar,
|
|
rcMvrPortStatus INTEGER
|
|
}
|
|
|
|
rcMvrPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index identifying this entry."
|
|
::= { rcMvrIFEntry 1 }
|
|
|
|
rcMvrPortEnable OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls whether the MVR is enabled
|
|
on the port. A false disable(2) will prevent the
|
|
MVR on the port, and the configuration on the port will
|
|
be set to default value."
|
|
::= { rcMvrIFEntry 2 }
|
|
|
|
rcMvrType OBJECT-TYPE
|
|
SYNTAX INTEGER { non-mvr(0),source(1), receiver(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the MVR type of the port.
|
|
source(1) specifies the port as uplink port which receive
|
|
the multicast flow sent by router.receiver(2) specifies
|
|
the port connected to user host.non-mvr(0) specifies the port
|
|
is neither source nor receiver."
|
|
::= { rcMvrIFEntry 3 }
|
|
|
|
|
|
rcMvrImmediate OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the whether enable the immediate leave.
|
|
enable(1) specifies enable the immediate leave."
|
|
::= { rcMvrIFEntry 4 }
|
|
|
|
rcMvrPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { active(1), inactive(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the status of the port.
|
|
Active(1) specifies the port is a part of a VLAN.
|
|
Inactive(2) specifies the port is not a part of a VLAN."
|
|
::= { rcMvrIFEntry 5 }
|
|
|
|
|
|
--
|
|
-- The per interface MVR configuration table
|
|
--
|
|
|
|
rcMvrMemberTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMvrMemberEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the list of IP multicast group that
|
|
allow user join."
|
|
::= { rcMvrConfig 9 }
|
|
|
|
rcMvrMemberEntry OBJECT-TYPE
|
|
SYNTAX RcMvrMemberEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the IP multicast group that
|
|
allow user join."
|
|
INDEX { rcMvrMemberPort,rcMvrMemberVlan,rcMvrMemberGroupAddress}
|
|
::= { rcMvrMemberTable 1 }
|
|
|
|
RcMvrMemberEntry ::= SEQUENCE {
|
|
rcMvrMemberPort INTEGER,
|
|
rcMvrMemberVlan INTEGER,
|
|
rcMvrMemberGroupAddress IpAddress,
|
|
rcMvrMemberGroupType INTEGER,
|
|
rcMvrMemberRowStatus RowStatus,
|
|
rcMvrMemberReplicableVlans Vlanset
|
|
}
|
|
|
|
rcMvrMemberPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index identifying this entry."
|
|
::= { rcMvrMemberEntry 1 }
|
|
|
|
rcMvrMemberVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the multicast VLAN that allow user join."
|
|
::= { rcMvrMemberEntry 2 }
|
|
|
|
rcMvrMemberGroupAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the IP multicast group that allow user join."
|
|
::= { rcMvrMemberEntry 3 }
|
|
|
|
rcMvrMemberGroupType OBJECT-TYPE
|
|
SYNTAX INTEGER { static(1), dynamic(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the status of the multicast group.
|
|
static(1) specifies the port join the IP multicast group by staticly configured.
|
|
dynamic(2) specifies the port join the IP multicast group by IGMP join packet."
|
|
::= { rcMvrMemberEntry 4 }
|
|
|
|
rcMvrMemberRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of this entry. When the 'rcMvrEnable' and 'rcMvrIpmcReplicationEnable'
|
|
object are both enabled, the Max access of this object is read-only."
|
|
::= { rcMvrMemberEntry 5 }
|
|
|
|
rcMvrMemberReplicableVlans OBJECT-TYPE
|
|
SYNTAX Vlanset
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP multicast replicaton vlan bitlist."
|
|
::= { rcMvrMemberEntry 6 }
|
|
|
|
--
|
|
-- MVR port statistics information table
|
|
--
|
|
rcMvrPortStatisticsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcMvrPortStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries that note statistics information of
|
|
the IGMP packets received on each port."
|
|
::= { rcMvrConfig 10 }
|
|
|
|
rcMvrPortStatisticsEntry OBJECT-TYPE
|
|
SYNTAX RcMvrPortStatisticsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the statistics information of
|
|
the IGMP packets received on each port."
|
|
INDEX { rcMvrPortStatisticsPortid }
|
|
::= { rcMvrPortStatisticsTable 1 }
|
|
|
|
RcMvrPortStatisticsEntry ::= SEQUENCE {
|
|
rcMvrPortStatisticsPortid INTEGER,
|
|
rcMvrPortStatisticsClear INTEGER,
|
|
rcMvrPortStatisticsRecvQueryPkts Counter,
|
|
rcMvrPortStatisticsRecvReportPkts Counter,
|
|
rcMvrPortStatisticsRecvLeavePkts Counter,
|
|
rcMvrPortStatisticsDropQueryPkts Counter,
|
|
rcMvrPortStatisticsDropReportPkts Counter,
|
|
rcMvrPortStatisticsDropLeavePkts Counter,
|
|
rcMvrPortLastReplaceNewMulticast IpAddress,
|
|
rcMvrPortLastReplaceOldMulticast IpAddress,
|
|
rcMvrPortReplaceTotalCount Counter
|
|
}
|
|
|
|
rcMvrPortStatisticsPortid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index identifying this entry."
|
|
::= { rcMvrPortStatisticsEntry 1 }
|
|
|
|
rcMvrPortStatisticsClear OBJECT-TYPE
|
|
SYNTAX INTEGER {read(0),clear(1)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this object 1 to clear all the information of MVR port statistics.
|
|
Get this object will always return 0."
|
|
::= { rcMvrPortStatisticsEntry 2 }
|
|
|
|
rcMvrPortStatisticsRecvQueryPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object notes the count of query packet received on this port."
|
|
::= { rcMvrPortStatisticsEntry 3 }
|
|
|
|
rcMvrPortStatisticsRecvReportPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object notes the count of report packet received on this port."
|
|
::= { rcMvrPortStatisticsEntry 4 }
|
|
|
|
rcMvrPortStatisticsRecvLeavePkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object notes the count of leave packet received on this port."
|
|
::= { rcMvrPortStatisticsEntry 5 }
|
|
|
|
rcMvrPortStatisticsDropQueryPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object notes the count of query packet droped on this port."
|
|
::= { rcMvrPortStatisticsEntry 6 }
|
|
|
|
rcMvrPortStatisticsDropReportPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object notes the count of report packet droped on this port."
|
|
::= { rcMvrPortStatisticsEntry 7 }
|
|
|
|
rcMvrPortStatisticsDropLeavePkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object notes the count of leave packet droped on this port."
|
|
::= { rcMvrPortStatisticsEntry 8 }
|
|
|
|
rcMvrPortLastReplaceNewMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object notes the new multicast IP address of the last replace."
|
|
::= { rcMvrPortStatisticsEntry 9 }
|
|
|
|
rcMvrPortLastReplaceOldMulticast OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object notes the old multicast IP address of the last replace."
|
|
::= { rcMvrPortStatisticsEntry 10 }
|
|
|
|
rcMvrPortReplaceTotalCount OBJECT-TYPE
|
|
SYNTAX Counter
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object notes count of replace taken place on this port."
|
|
::= { rcMvrPortStatisticsEntry 11 }
|
|
|
|
rcMvrProxySuppressionEnable OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls whether the proxy suppression is enabled on the device.
|
|
A disable(2) value will prevent the proxy suppression on the device."
|
|
DEFVAL { disable }
|
|
::= { rcMvrConfig 11 }
|
|
|
|
rcIgmpQuerierEnable OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls whether the IGMP querier is enabled on the device.
|
|
A disable(2) value will prevent the IGMP querier on the device."
|
|
DEFVAL { disable }
|
|
::= { rcMvrConfig 12 }
|
|
|
|
rcMvrProxySourceIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specify the source IP address for MVR proxy and querier.
|
|
If not configure this object ,the default value is the IP address on
|
|
IP interface 0.Then if the IP address on IP interface 0 is none, the
|
|
default value is 0.0.0.0."
|
|
::= { rcMvrConfig 13 }
|
|
|
|
rcIgmpQueryInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (10..65535)
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specify interval time that querier send general query packet.
|
|
The default value is 60s."
|
|
DEFVAL {60}
|
|
::= { rcMvrConfig 14 }
|
|
|
|
rcMvrProxyQueryMaxReponseInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..25)
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specify max response time for host to response the MVR proxy.
|
|
The default value is 10s."
|
|
DEFVAL {10}
|
|
::= { rcMvrConfig 15 }
|
|
|
|
rcMvrProxyQueryLastMemberInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..25)
|
|
UNITS "Seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specify last member query interval.When last member leave the
|
|
group,MVR proxy will send the special group query packet.If MVR proxy receive
|
|
none report packet of this group in the last member query interval, MVR proxy
|
|
will delete this group from multicast transmit table.The default value is 1s."
|
|
DEFVAL {1}
|
|
::= { rcMvrConfig 16 }
|
|
|
|
rcMvrIpmcReplicationEnable OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls whether the IP multicast replication is enabled on the device.
|
|
A disable(2) value will prevent the IP multicast replication on the device.
|
|
The ` rcMvrEnable ' object must be set to `disable' prior to modify this object value.
|
|
If 'rcMvrEnable' and 'rcMvrIpmcReplicationEnable' are both enabled ,
|
|
setting ` rcMvrEnable ' to `disable' will automatically set 'rcMvrIpmcReplicationEnable'
|
|
to `disable'."
|
|
DEFVAL {disable}
|
|
::= { rcMvrConfig 17 }
|
|
|
|
|
|
------------------------------------------------------------------------------
|
|
--
|
|
-- IGMP Filter Config Group
|
|
--
|
|
|
|
rcIgmpFilterEnable OBJECT-TYPE
|
|
SYNTAX EnableVar
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls whether the IGMP filtering
|
|
is enabled on the device. A disable(2) value will
|
|
prevent the IGMP filtering action on the device."
|
|
DEFVAL { enable }
|
|
::= { rcIgmpFilterConfig 1 }
|
|
|
|
rcIgmpFilterMaxProfiles OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
UNITS "profiles"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the maximum number of profiles supported by
|
|
this device. A value of zero indicates no limitation on
|
|
the number of profiles."
|
|
::= { rcIgmpFilterConfig 2 }
|
|
|
|
|
|
--
|
|
-- IGMP Filter Information Group
|
|
--
|
|
rcIgmpFilterAddEntry OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates adding a IGMP profile entry. The value imply the profile number."
|
|
::= { rcIgmpFilterConfig 3 }
|
|
|
|
rcIgmpFilterDelEntry OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates deleting a IGMP profile entry. The value imply the profile number."
|
|
::= { rcIgmpFilterConfig 4 }
|
|
|
|
|
|
rcIgmpFilterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains entries that identify lists of
|
|
IP Multicast groups for each profile configured on
|
|
the device.
|
|
|
|
Each entry contains a range of contiguous IP
|
|
Multicast groups associated to a profile index.
|
|
Multiple rcIgmpFilterEntry may be associated
|
|
with the same rcIgmpFilterProfileIndex.
|
|
|
|
All the rcIgmpFilterEntry with the same profile index
|
|
are subjected to the same IGMP filtering action as
|
|
defined in rcIgmpFilterProfileAction.
|
|
|
|
Each profile index may be associated with zero or more
|
|
ports through rcIgmpFilterIFPortIndex object
|
|
in rcIgmpFilterIFTable.
|
|
The maximum number of entries is determined by
|
|
rcIgmpFilterMaxProfiles."
|
|
|
|
::= { rcIgmpFilterConfig 5 }
|
|
|
|
rcIgmpFilterEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpFilterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) in the rcIgmpFilterTable."
|
|
INDEX { rcIgmpFilterProfileIndex,
|
|
rcIgmpFilterStartAddress }
|
|
::= { rcIgmpFilterTable 1 }
|
|
|
|
RcIgmpFilterEntry ::=
|
|
SEQUENCE {
|
|
rcIgmpFilterProfileIndex INTEGER,
|
|
rcIgmpFilterStartAddress IpAddress,
|
|
rcIgmpFilterEndAddress IpAddress,
|
|
rcIgmpFilterProfileAction INTEGER,
|
|
rcIgmpFilterRowStatus RowStatus
|
|
}
|
|
|
|
rcIgmpFilterProfileIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index identifying this entry."
|
|
::= { rcIgmpFilterEntry 1 }
|
|
|
|
|
|
rcIgmpFilterStartAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object describes the start of the IP multicast
|
|
group address of a contiguous range which will be
|
|
subjected to filtering operation."
|
|
::= { rcIgmpFilterEntry 2 }
|
|
|
|
|
|
rcIgmpFilterEndAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the end of the IP multicast
|
|
group address of a contiguous range which will be
|
|
subjected to filtering operation."
|
|
::= { rcIgmpFilterEntry 3 }
|
|
|
|
rcIgmpFilterProfileAction OBJECT-TYPE
|
|
SYNTAX INTEGER { permit(1), deny(2) }
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object defines the action for
|
|
filtering IGMP reports for this profile.
|
|
|
|
If the object is set to deny(2):
|
|
then all IGMP reports associated to IP multicast
|
|
groups included in the profile identified by
|
|
rcIgmpFilterProfileIndex will be dropped.
|
|
|
|
If the object is set to permit(1):
|
|
then all IGMP reports associated to IP multicast
|
|
groups not included in the profile identified by
|
|
rcIgmpFilterProfileIndex will be dropped."
|
|
DEFVAL { permit }
|
|
::= { rcIgmpFilterEntry 4 }
|
|
|
|
rcIgmpFilterRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row status of this entry."
|
|
::= { rcIgmpFilterEntry 5 }
|
|
|
|
|
|
--
|
|
-- The per interface IGMP filtering configuration table
|
|
--
|
|
|
|
rcIgmpFilterIFTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpFilterIFEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the list of ports that can
|
|
support IGMP filter feature."
|
|
::= { rcIgmpFilterConfig 6 }
|
|
|
|
rcIgmpFilterIFEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpFilterIFEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the configuration for associating
|
|
the IGMP filter profile index with the port.
|
|
|
|
An entry is created for each of the IGMP filter capable
|
|
port on the system.
|
|
|
|
The entry is removed on removal of corresponding
|
|
port from system."
|
|
INDEX { rcIgmpFilterIFPortIndex }
|
|
::= { rcIgmpFilterIFTable 1 }
|
|
|
|
RcIgmpFilterIFEntry ::= SEQUENCE {
|
|
rcIgmpFilterIFPortIndex INTEGER,
|
|
rcIgmpFilterIFProfileIndex INTEGER,
|
|
rcIgmpFilterIFMaxGroups INTEGER,
|
|
rcIgmpFilterIFCurrentGroups INTEGER,
|
|
rcIgmpFilterIFMaxGroupsAction INTEGER
|
|
}
|
|
|
|
rcIgmpFilterIFPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies which IGMP filter profile applies to this
|
|
port. If the value of this MIB object matches the
|
|
value of rcIgmpFilterProfileIndex in rcIgmpFilterTable,
|
|
the corresponding profile configuration will apply to
|
|
this port.
|
|
|
|
A value of zero indicates no profile is associated
|
|
with corresponding port.
|
|
|
|
The filtering action on each port is also
|
|
defined by the associated profile."
|
|
::= { rcIgmpFilterIFEntry 1 }
|
|
|
|
|
|
rcIgmpFilterIFProfileIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies which IGMP filter profile applies to this
|
|
port. If the value of this MIB object matches the
|
|
value of rcIgmpFilterProfileIndex in rcIgmpFilterTable,
|
|
the corresponding profile configuration will apply to
|
|
this interface.
|
|
|
|
A value of zero indicates no profile is associated
|
|
with corresponding port.
|
|
|
|
The filtering action on each port is also
|
|
defined by the associated profile."
|
|
::= { rcIgmpFilterIFEntry 2 }
|
|
|
|
rcIgmpFilterIFMaxGroups OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the max multicast group numbers that allow this
|
|
port join.
|
|
A value of zero indicates no max limitation is associated
|
|
with corresponding interface."
|
|
DEFVAL { 0 }
|
|
::= { rcIgmpFilterIFEntry 3 }
|
|
|
|
rcIgmpFilterIFCurrentGroups OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the current multicast group numbers that this
|
|
port has joined."
|
|
::= { rcIgmpFilterIFEntry 4 }
|
|
|
|
rcIgmpFilterIFMaxGroupsAction OBJECT-TYPE
|
|
SYNTAX INTEGER { deny(1), replace(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies which action will take place on the port when exceed the
|
|
max multicast group numbers.
|
|
A value of deny(1) indicates deny join the multicast group when
|
|
exceed the max multicast group numbers.
|
|
A value of replace(2) indicates allow to replace the existed multicast group
|
|
when exceed the max multicast group numbers.But now not supported."
|
|
DEFVAL { deny }
|
|
::= { rcIgmpFilterIFEntry 5 }
|
|
|
|
--
|
|
-- The per vlan IGMP filtering configuration table
|
|
--
|
|
rcIgmpFilterVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcIgmpFilterVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the list of vlans that can
|
|
support IGMP filter feature."
|
|
::= { rcIgmpFilterConfig 7 }
|
|
|
|
rcIgmpFilterVlanEntry OBJECT-TYPE
|
|
SYNTAX RcIgmpFilterVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains the configuration for associating
|
|
the IGMP filter profile index with the vlan. "
|
|
INDEX { rcIgmpFilterIFPortIndex }
|
|
::= { rcIgmpFilterVlanTable 1 }
|
|
|
|
RcIgmpFilterVlanEntry ::= SEQUENCE {
|
|
rcIgmpFilterVLANIndex INTEGER,
|
|
rcIgmpFilterVlanProfileIndex INTEGER,
|
|
rcIgmpFilterVlanMaxGroups INTEGER,
|
|
rcIgmpFilterVlanCurrentGroups INTEGER,
|
|
rcIgmpFilterVlanMaxGroupsAction INTEGER
|
|
}
|
|
|
|
rcIgmpFilterVLANIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index identifying this entry."
|
|
::= { rcIgmpFilterVlanEntry 1 }
|
|
|
|
|
|
rcIgmpFilterVlanProfileIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..1024)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies which IGMP filter profile applies to this
|
|
vlan. If the value of this MIB object matches the
|
|
value of rcIgmpFilterProfileIndex in rcIgmpFilterTable,
|
|
the corresponding profile configuration will apply to
|
|
this vlan.
|
|
|
|
A value of zero indicates no profile is associated
|
|
with corresponding vlan.
|
|
|
|
The filtering action on each port is also
|
|
defined by the associated profile."
|
|
::= { rcIgmpFilterVlanEntry 2 }
|
|
|
|
rcIgmpFilterVlanMaxGroups OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the max multicast group numbers that allow this
|
|
vlan join.
|
|
A value of zero indicates no max limitation is associated
|
|
with corresponding vlan."
|
|
DEFVAL { 0 }
|
|
::= { rcIgmpFilterVlanEntry 3 }
|
|
|
|
rcIgmpFilterVlanCurrentGroups OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the current multicast group numbers that this
|
|
vlan has joined."
|
|
::= { rcIgmpFilterVlanEntry 4 }
|
|
|
|
rcIgmpFilterVlanMaxGroupsAction OBJECT-TYPE
|
|
SYNTAX INTEGER { deny(1), replace(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies which action will take place on the vlan when exceed the
|
|
max multicast group numbers.
|
|
A value of deny(1) indicates deny join the multicast group when
|
|
exceed the max multicast group numbers.
|
|
A value of replace(2) indicates allow to replace the first multicast
|
|
group on the vlan when exceed the max multicast group numbers."
|
|
DEFVAL { deny }
|
|
::= { rcIgmpFilterVlanEntry 5 }
|
|
--end MVR group --
|
|
|
|
END |