883 lines
33 KiB
Plaintext
883 lines
33 KiB
Plaintext
-- MibName=rcL3
|
|
SWITCH-L3-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Counter32, Gauge32,
|
|
Unsigned32, Integer32,
|
|
IpAddress FROM SNMPv2-SMI
|
|
|
|
InetAddress FROM INET-ADDRESS-MIB
|
|
|
|
RowStatus, TruthValue,
|
|
MacAddress FROM SNMPv2-TC
|
|
|
|
PortList FROM SWITCH-TC
|
|
|
|
|
|
Vlanset FROM SWITCH-TC
|
|
|
|
iscomSwitch FROM RAISECOM-BASE-MIB;
|
|
|
|
|
|
rcL3 MODULE-IDENTITY
|
|
LAST-UPDATED "0412200000Z" -- Dec 20, 2004
|
|
ORGANIZATION "Wind River Systems, Inc."
|
|
CONTACT-INFO "Wind River Systems, Inc.
|
|
E-mail: support@windriver.com"
|
|
|
|
DESCRIPTION "ROSE Generic Layer 3 MIB definition."
|
|
|
|
REVISION "0412200000Z" -- Dec 20, 2004
|
|
DESCRIPTION "Initial MIB creation."
|
|
|
|
::= {iscomSwitch 16}
|
|
|
|
-- -------------------------------------------------------------------------- --
|
|
-- groups in the ROSE Layer 3 MIB
|
|
-- -------------------------------------------------------------------------- --
|
|
rcL3IpSubnet OBJECT IDENTIFIER ::= { rcL3 1 }
|
|
rcL3IpStatic OBJECT IDENTIFIER ::= { rcL3 2 }
|
|
rcL3IpRoute OBJECT IDENTIFIER ::= { rcL3 3 }
|
|
-- ----------------------------------------------------------------------------
|
|
--
|
|
-- rcL3IpSubnet:
|
|
-- This group is used to configure and retrieve subnet parameters
|
|
-- required for the basic routing functionality. Before a "L2/L3 hybrid"
|
|
-- VLAN or a "L3 only" interface is used for routing, it must be assigned
|
|
-- to at least one subnet. Although ROSE supports multiple subnets per
|
|
-- VLAN or L3 interface, ROSE recommends using one subnet per interface.
|
|
--
|
|
-- Note that the subnet IP address is added indirectly. It is calculated
|
|
-- by logically AND'ing the Agent's IP address (rcL3IpSubnetAgentIpAddr)
|
|
-- for this subnet with its subnet mask (rcL3IpSubnetMask). These
|
|
-- subnets are automatically added to the software Routing Table by IP
|
|
-- and can be seen in the rcL3IpDynamicRouteTable.
|
|
--
|
|
-- For a L2/L3 hybrid switch, a static VLAN must be created for the
|
|
-- specified rcL3IpSubnetVidIface VLAN ID value before this entry can
|
|
-- be used.
|
|
--
|
|
-- Note that one of the entries for the first interface in this table
|
|
-- is directly mapped to the IP address parameters in the ROSE Common MIB
|
|
-- (ROSE-COMMON-MIB; i.e., rcCommonIPIpAddress, rcCommonIPNetMask).
|
|
-- This allows the initial agent IP address to be set using the serial
|
|
-- console, BOOTP, or DHCP. The remaining subnet entries can be entered
|
|
-- using SNMP or the Web management interfaces.
|
|
--
|
|
-- -------------------------------------------------------------------------- --
|
|
--
|
|
rcL3IpSubnetMaxRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum possible number of rows in the 'rcL3IpSubnetTable'."
|
|
::= { rcL3IpSubnet 1 }
|
|
|
|
rcL3IpSubnetCurrentRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of rows in the 'rcL3IpSubnetTable'."
|
|
::= { rcL3IpSubnet 2 }
|
|
|
|
rcL3IpSubnetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcL3IpSubnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of subnet parameters. There is one entry
|
|
available for each of the 'rcL3IpSubnetMaxRows'
|
|
supported IP subnets."
|
|
::= { rcL3IpSubnet 3 }
|
|
|
|
rcL3IpSubnetEntry OBJECT-TYPE
|
|
SYNTAX RcL3IpSubnetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of subnet parameters."
|
|
INDEX { rcL3IpSubnetIfIndex, rcL3IpSubnetIpAddress }
|
|
::= { rcL3IpSubnetTable 1 }
|
|
|
|
RcL3IpSubnetEntry ::= SEQUENCE {
|
|
rcL3IpSubnetIfIndex Integer32,
|
|
rcL3IpSubnetIpAddress IpAddress,
|
|
rcL3IpSubnetMask IpAddress,
|
|
rcL3IpSubnetVlans Vlanset,
|
|
rcL3IpSubnetName OCTET STRING,
|
|
rcL3IpSubnetRowStatus RowStatus,
|
|
rcL3IpSubnetAllowPortList PortList
|
|
}
|
|
|
|
rcL3IpSubnetIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
The ifIndex of the interface associated with this subnet."
|
|
::= { rcL3IpSubnetEntry 1 }
|
|
|
|
rcL3IpSubnetIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
The network management station uses this IP Address to talk
|
|
with the Agent on this subnet. This IP address logically
|
|
AND'ed with 'rcL3IpSubnetMask' yields the actual subnet
|
|
value for this subnet."
|
|
::= { rcL3IpSubnetEntry 2 }
|
|
|
|
rcL3IpSubnetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
The subnet mask for this subnet. It contains 1's in the
|
|
bit positions for the net and subnet IDs and 0's in the
|
|
bit positions for host ID. The 1's must be contiguous,
|
|
starting with the left most bit."
|
|
::= { rcL3IpSubnetEntry 3 }
|
|
|
|
rcL3IpSubnetVlans OBJECT-TYPE
|
|
SYNTAX Vlanset
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE: { default=0:all }
|
|
For a L2/L3 hybrid switch, this object contains the actual
|
|
VLAN ID (VID) from 1 to 4094 or 0 if the VID is unassigned.
|
|
For a L3 only switch, this object contains the actual switch
|
|
interface from 1 to 4094 or 0 if unassigned.
|
|
|
|
Changing this object for this row causes all rows with the same
|
|
'rcL3IpSubnetIfIndex' as this row to be changed to this new
|
|
'rcL3IpSubnetVidIface' value."
|
|
::= { rcL3IpSubnetEntry 4 }
|
|
|
|
rcL3IpSubnetName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE: { '':all )
|
|
A user reference name for this subnet."
|
|
::= { rcL3IpSubnetEntry 5 }
|
|
|
|
rcL3IpSubnetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
This object indicates the status of this entry. A row in this
|
|
table must be created using the createAndWait(5) action state
|
|
(i.e., createAndGo(4) is not supported). This object can only
|
|
be set to active(1) after all objects for this row are valid.
|
|
The 'rcL3IpSubnetName' is optional.
|
|
|
|
Note that the notInService(2) state is not supported. Objects
|
|
in this table row can be changed when this object is notReady(3)
|
|
or active(1)."
|
|
::= { rcL3IpSubnetEntry 6 }
|
|
|
|
rcL3IpSubnetAllowPortList OBJECT-TYPE
|
|
SYNTAX PortList
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow ports of the vlan."
|
|
::= { rcL3IpSubnetEntry 7 }
|
|
|
|
-- -------------------------------------------------------------------------- --
|
|
--
|
|
-- rcL3IpStatic:
|
|
-- This group is used to configure and retrieve static routes for both
|
|
-- host and subnet IP destinations.
|
|
--
|
|
-- This group is independent of the underlying switch hardware and
|
|
-- architecture. It indicates how many Host IDs and Subnet IDs that
|
|
-- the hardware can directly support, if any. In general, hardware
|
|
-- entries route much faster than software entries.
|
|
--
|
|
-- The user can choose to reserve zero, some, or all of the available
|
|
-- hardware entries for use as static routes. The remaining entries,
|
|
-- if any, are reserved for dynamic routes (e.g., RIP, OSPF, etc.).
|
|
--
|
|
-- Note that the default route entry (0.0.0.0) cannot be placed in this
|
|
-- table. If the default route was ever placed into the hardware route
|
|
-- table, unknown routes would never be sent to the CPU (i.e., this would
|
|
-- prevent new routes from being learned and/or placed into the hardware
|
|
-- route table). The default route is reserved for use by the agent.
|
|
--
|
|
-- -------------------------------------------------------------------------- --
|
|
--
|
|
rcL3IpStaticMaxHwHosts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The maximum number, if any, of hosts that the hardware
|
|
can support in its routing table.
|
|
|
|
Note that if the hardware supports both hosts and subnets
|
|
in the same table, this number represents both and
|
|
'rcL3IpStaticMaxHwSubnets' is zero (0)."
|
|
::= { rcL3IpStatic 1 }
|
|
|
|
rcL3IpStaticNumStaticHwHosts OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
The number of 'rcL3IpStaticMaxHwHosts' hosts that the user
|
|
would like to reserve for static routes. A SNMPv1 badValue
|
|
or SNMPv2 wrongValue is returned if the user attempts to use
|
|
a value less than zero or greater than 'rcL3IpStaticMaxHwHosts'.
|
|
|
|
WARNING: This value is only used during system initialization
|
|
(i.e., after a reset)."
|
|
DEFVAL {1024}
|
|
::= { rcL3IpStatic 2 }
|
|
|
|
rcL3IpStaticMaxHwSubnets OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The maximum number, if any, of subnets that the hardware
|
|
can support in its routing table.
|
|
|
|
Note that if the hardware supports both hosts and subnets
|
|
in the same table, this value is zero (0)."
|
|
::= { rcL3IpStatic 3 }
|
|
|
|
rcL3IpStaticNumStaticHwSubnets OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
The number of 'rcL3IpStaticMaxHwSubnets' subnets that the user
|
|
would like to reserve for static routes. An A SNMPv1 badValue
|
|
or SNMPv2 wrongValue is returned if the user attempts to use a
|
|
value less than zero or greater than 'rcL3IpStaticMaxHwSubnets'.
|
|
|
|
WARNING: This value is only used during system initialization
|
|
(i.e., after a reset)."
|
|
::= { rcL3IpStatic 4 }
|
|
|
|
rcL3IpStaticRouteMaxRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum possible number of rows in the
|
|
'rcL3IpStaticRouteTable'."
|
|
::= { rcL3IpStatic 5 }
|
|
|
|
rcL3IpStaticRouteCurrentRows OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of rows in the 'rcL3IpStaticRouteTable'."
|
|
::= { rcL3IpStatic 6 }
|
|
|
|
rcL3IpStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcL3IpStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of static routes."
|
|
::= { rcL3IpStatic 7 }
|
|
|
|
rcL3IpStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX RcL3IpStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of static route parameters."
|
|
INDEX { rcL3IpStaticDestIpAddress }
|
|
::= { rcL3IpStaticRouteTable 1 }
|
|
|
|
RcL3IpStaticRouteEntry ::= SEQUENCE {
|
|
rcL3IpStaticDestIpAddress IpAddress,
|
|
rcL3IpStaticMask IpAddress,
|
|
rcL3IpStaticNextHop IpAddress,
|
|
rcL3IpStaticName OCTET STRING,
|
|
rcL3IpStaticUseHw TruthValue,
|
|
rcL3IpStaticInHw TruthValue,
|
|
rcL3IpStaticGateway TruthValue,
|
|
rcL3IpStaticRowStatus RowStatus
|
|
}
|
|
|
|
rcL3IpStaticDestIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
The static route host or subnet IP destination address.
|
|
All IP destination addresses must be non-zero."
|
|
::= { rcL3IpStaticRouteEntry 1 }
|
|
|
|
rcL3IpStaticMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
The mask for this IP destination. It contains 1's in the
|
|
bit positions for the net and subnet IDs and 0's in the
|
|
bit positions for host ID. The 1's must be contiguous,
|
|
starting with the left most bit.
|
|
|
|
Note that a host route uses a 255.255.255.255 mask."
|
|
::= { rcL3IpStaticRouteEntry 2 }
|
|
|
|
rcL3IpStaticNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the next hop of this route.
|
|
(In the case of a route bound to an interface
|
|
which is realized via a broadcast media, the value
|
|
of this field is the agent's IP address on that
|
|
interface.)"
|
|
::= { rcL3IpStaticRouteEntry 3 }
|
|
|
|
rcL3IpStaticName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..255))
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"DURABLE: { '':all )
|
|
A user reference name for this Static Route."
|
|
::= { rcL3IpStaticRouteEntry 4 }
|
|
|
|
rcL3IpStaticUseHw OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"DURABLE: { false:all )
|
|
By setting this object to true(1), the user indicates the
|
|
desire to use hardware routing for this entry. To disable
|
|
hardware routing for this entry, set this object to false(2).
|
|
If the underlying switch fabric does not support hardware
|
|
routing, this object is ignored.
|
|
|
|
There is usually limited space in the hardware routing table.
|
|
Consequently, if the user enables hardware routing on 'too'
|
|
many entries, the agent assigns routes on a first come, first
|
|
serve basis (i.e., the user may not get the expected results)."
|
|
DEFVAL { false }
|
|
::= { rcL3IpStaticRouteEntry 5 }
|
|
|
|
rcL3IpStaticInHw OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this object is true(1), this static route is actually in
|
|
the hardware Route Table. Otherwise it is false(2)."
|
|
::= { rcL3IpStaticRouteEntry 6 }
|
|
|
|
rcL3IpStaticGateway OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE: { false:all )
|
|
By setting this object to true(1), the user indicates that this
|
|
subnet route is a gateway route (i.e., connected to external
|
|
router). By setting it to false(2), the user indicates that this
|
|
is a direct route. If 'rcL3IpStaticMask' is '255.255.255.255'
|
|
(i.e., a host route) for this entry, this object cannot be set
|
|
to true(1)."
|
|
DEFVAL { false }
|
|
::= { rcL3IpStaticRouteEntry 7 }
|
|
|
|
rcL3IpStaticRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
This object indicates the status of this entry. A row in this
|
|
table must be created using the createAndWait(5) action state
|
|
(i.e., createAndGo(4) is not supported). This object can only
|
|
be set to active(1) after all objects for this row are valid.
|
|
The 'rcL3IpStaticName' is optional.
|
|
|
|
Note that the notInService(2) state is not supported. Objects
|
|
in this table row can be changed when this object is notReady(3)
|
|
or active(1)."
|
|
::= { rcL3IpStaticRouteEntry 8 }
|
|
|
|
raisecomIpv6RMDefaultGateway OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This address is used only when ip
|
|
routing is not-forwarding."
|
|
::= { rcL3IpStatic 8 }
|
|
|
|
|
|
rcL3StaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcL3StaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of static routes."
|
|
::= { rcL3IpStatic 9 }
|
|
|
|
rcL3StaticRouteEntry OBJECT-TYPE
|
|
SYNTAX RcL3StaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of static route parameters."
|
|
INDEX {rcL3StaticRouteType, rcL3StaticDestAddress ,rcL3StaticPrefixLen,rcL3StaticNextHop }
|
|
::= { rcL3StaticRouteTable 1 }
|
|
|
|
RcL3StaticRouteEntry ::= SEQUENCE {
|
|
rcL3StaticRouteType INTEGER,
|
|
rcL3StaticDestAddress InetAddress,
|
|
rcL3StaticPrefixLen Unsigned32,
|
|
rcL3StaticNextHop InetAddress,
|
|
rcL3StaticGateway TruthValue,
|
|
rcL3StaticDistance Unsigned32,
|
|
rcL3StaticRowStatus RowStatus
|
|
}
|
|
|
|
rcL3StaticRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ipv4(1),
|
|
ipv6(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ip route type."
|
|
::= { rcL3StaticRouteEntry 1}
|
|
|
|
rcL3StaticDestAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
The static route host or subnet IP destination address.
|
|
All IP destination addresses must be non-zero."
|
|
::= { rcL3StaticRouteEntry 2 }
|
|
|
|
rcL3StaticPrefixLen OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" ip prefix length"
|
|
::= { rcL3StaticRouteEntry 3 }
|
|
|
|
rcL3StaticNextHop OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the next hop of this route.
|
|
(In the case of a route bound to an interface
|
|
which is realized via a broadcast media, the value
|
|
of this field is the agent's IP address on that
|
|
interface.)"
|
|
::= { rcL3StaticRouteEntry 4 }
|
|
|
|
rcL3StaticGateway OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE: { false:all )
|
|
By setting this object to true(1), the user indicates that this
|
|
subnet route is a gateway route (i.e., connected to external
|
|
router). By setting it to false(2), the user indicates that this
|
|
is a direct route. If 'rcL3IpStaticMask' is '255.255.255.255'
|
|
(i.e., a host route) for this entry, this object cannot be set
|
|
to true(1)."
|
|
DEFVAL { false }
|
|
::= { rcL3StaticRouteEntry 5 }
|
|
|
|
rcL3StaticDistance OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The distance of the static route"
|
|
::= { rcL3StaticRouteEntry 6 }
|
|
|
|
rcL3StaticRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"DURABLE:
|
|
This object indicates the status of this entry. A row in this
|
|
table must be created using the createAndWait(5) action state
|
|
(i.e., createAndGo(4) is not supported). This object can only
|
|
be set to active(1) after all objects for this row are valid.
|
|
The 'rcL3IpStaticName' is optional.
|
|
|
|
Note that the notInService(2) state is not supported. Objects
|
|
in this table row can be changed when this object is notReady(3)
|
|
or active(1)."
|
|
::= { rcL3StaticRouteEntry 7 }
|
|
|
|
rcL3IpStaticEcmpPathSelectMode OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
other(0),
|
|
SIP(1),
|
|
DIP(2),
|
|
L4Port(3),
|
|
DIPxorL4Port(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ECMP path select mode"
|
|
::= { rcL3IpStatic 10 }
|
|
|
|
|
|
|
|
|
|
-- -------------------------------------------------------------------------- --
|
|
--
|
|
-- rcL3IpRoute:
|
|
-- The MIB II Routing Table (ipRouteTable) does not include the
|
|
-- information required to support the UNIX style "netstat -nr" command.
|
|
-- This group replicates some of the ipRouteTable objects and adds
|
|
-- additional objects to support the "netstat -nr" functionality.
|
|
--
|
|
-- Note that the "netstat -nr" functionality has not been implemented.
|
|
--
|
|
-- This table also provides 'RowStatus' support for the 'ipRouteTable'
|
|
-- objects contained in this table.
|
|
--
|
|
-- The ipRouteTable objects are not actually duplicated, but use the IDB+
|
|
-- "alternate object" capability to point back to the MIB II ipRouteTable.
|
|
-- Note that the utilized ipRouteTable objects are presented here
|
|
-- in a more logical order (similar to RFC1354).
|
|
--
|
|
-- -------------------------------------------------------------------------- --
|
|
--
|
|
rcL3IpRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RcL3IpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides Routing Table access. This table can be used to
|
|
modify or add Routing Table entries. Changes made with this
|
|
table are not saved to NVM (nonvolatile memory). To save
|
|
static routes to NVM, use the rcL3IpStaticRouteTable."
|
|
::= { rcL3IpRoute 1 }
|
|
|
|
rcL3IpRouteEntry OBJECT-TYPE
|
|
SYNTAX RcL3IpRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Provides enough routing information to support the UNIX style
|
|
'netstat -nr' command and to support maintenance of the
|
|
Routing Table."
|
|
INDEX { rcL3IpRouteDest }
|
|
::= { rcL3IpRouteTable 1 }
|
|
|
|
RcL3IpRouteEntry ::=
|
|
SEQUENCE {
|
|
rcL3IpRouteDest IpAddress,
|
|
rcL3IpRouteMask IpAddress,
|
|
rcL3IpRouteNextHopIp IpAddress,
|
|
rcL3IpRouteNextHopMac MacAddress,
|
|
rcL3IpRouteIfIndex Integer32,
|
|
rcL3IpRouteType INTEGER,
|
|
rcL3IpRouteProto INTEGER,
|
|
rcL3IpRouteAge Unsigned32,
|
|
rcL3IpRouteMetric1 Integer32,
|
|
rcL3IpRouteUsingHw TruthValue,
|
|
rcL3IpRouteIsStatic TruthValue,
|
|
rcL3IpRouteFlags Unsigned32,
|
|
rcL3IpRouteRef Gauge32,
|
|
rcL3IpRouteUse Counter32,
|
|
rcL3IpRouteRowStatus RowStatus
|
|
}
|
|
|
|
rcL3IpRouteDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route. An
|
|
entry with a value of 0.0.0.0 is considered a
|
|
default route. Multiple routes to a single
|
|
destination can appear in the table, but access to
|
|
such multiple entries is dependent on the table-
|
|
access mechanisms defined by the network
|
|
management protocol in use."
|
|
::= { rcL3IpRouteEntry 1 }
|
|
|
|
rcL3IpRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the mask to be logical-ANDed with the
|
|
destination address before being compared to the
|
|
value in the rcL3IpRouteDest field.
|
|
|
|
If the value of the rcL3IpRouteDest is 0.0.0.0 (a
|
|
default route), then the mask value is also
|
|
0.0.0.0. It should be noted that all IP routing
|
|
subsystems implicitly use this mechanism."
|
|
::= { rcL3IpRouteEntry 2 }
|
|
|
|
rcL3IpRouteNextHopIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the next hop of this route.
|
|
(In the case of a route bound to an interface
|
|
which is realized via a broadcast media, the value
|
|
of this field is the agent's IP address on that
|
|
interface.)"
|
|
::= { rcL3IpRouteEntry 3 }
|
|
|
|
rcL3IpRouteNextHopMac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The six byte MAC address of the next hop of this
|
|
route. If the underlying hardware does not support this
|
|
object, an octet string of zero length is returned."
|
|
::= { rcL3IpRouteEntry 4 }
|
|
|
|
rcL3IpRouteIfIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the
|
|
local interface through which the next hop of this
|
|
route should be reached. The interface identified
|
|
by a particular value of this index is the same
|
|
interface as identified by the same value of
|
|
ifIndex."
|
|
::= { rcL3IpRouteEntry 5 }
|
|
|
|
rcL3IpRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
invalid(2), -- an invalidated route
|
|
direct(3), -- route to directly connected (sub-)network
|
|
indirect(4) -- route to a non-local
|
|
-- host/network/sub-network
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of route. Note that the values
|
|
direct(3) and indirect(4) refer to the notion of
|
|
direct and indirect routing in the IP architecture.
|
|
|
|
Setting this object to the value invalid(2) has
|
|
the effect of invalidating the corresponding entry
|
|
in the rcL3IpRouteTable object. That is, it
|
|
effectively disassociates the destination
|
|
identified with said entry from the route
|
|
identified with said entry. It is an
|
|
implementation-specific matter as to whether the
|
|
agent removes an invalidated entry from the table.
|
|
Accordingly, management stations must be prepared
|
|
to receive tabular information from agents that
|
|
corresponds to entries not currently in use.
|
|
Proper interpretation of such entries requires
|
|
examination of the relevant rcL3IpRouteType object."
|
|
::= { rcL3IpRouteEntry 6 }
|
|
|
|
rcL3IpRouteProto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
|
|
-- non-protocol information,
|
|
local(2), -- e.g., manually configured entries
|
|
|
|
netmgmt(3), -- set via a network management protocol
|
|
|
|
icmp(4), -- obtained via ICMP, e.g., Redirect
|
|
|
|
-- the remaining values are all gateway
|
|
-- routing protocols
|
|
egp(5),
|
|
ggp(6),
|
|
hello(7),
|
|
rip(8),
|
|
is-is(9),
|
|
es-is(10),
|
|
ciscoIgrp(11),
|
|
bbnSpfIgp(12),
|
|
ospf(13),
|
|
bgp(14)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing mechanism via which this route was
|
|
learned. Inclusion of values for gateway routing
|
|
protocols is not intended to imply that hosts
|
|
should support those protocols."
|
|
::= { rcL3IpRouteEntry 7 }
|
|
|
|
rcL3IpRouteAge OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds since this route was last
|
|
updated or otherwise determined to be correct.
|
|
Note that no semantics of `too old' can be implied
|
|
except through knowledge of the routing protocol
|
|
by which the route was learned."
|
|
::= { rcL3IpRouteEntry 8 }
|
|
|
|
rcL3IpRouteMetric1 OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
rcL3IpRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { rcL3IpRouteEntry 9 }
|
|
|
|
rcL3IpRouteUsingHw OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is true(1) if this route is contained in
|
|
the hardware routing table; otherwise, it is false(2)."
|
|
::= { rcL3IpRouteEntry 10 }
|
|
|
|
rcL3IpRouteIsStatic OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is true(1) if this route is defined in the
|
|
'rcL3IpStaticRouteTable'. This object is false(2) if this
|
|
route was created dynamically (e.g., with RIP, OSPF) or was
|
|
manually created using this table ('rcL3IpRouteTable') or
|
|
the RFC1213 'ipRouteTable'."
|
|
::= { rcL3IpRouteEntry 11 }
|
|
|
|
rcL3IpRouteFlags OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Not implemented. Returns '0'.
|
|
|
|
Contains the information required for a netstat-like
|
|
'Flags' field.
|
|
|
|
The flags field represents a decimal value of the flags
|
|
specified for a given route. The following is a list of
|
|
currently available flag values:
|
|
0x1 | - route is usable (that is, 'up')
|
|
0x2 | - destination is a gateway
|
|
0x4 | - host specific routing entry
|
|
0x8 | - host or net unreachable
|
|
0x10 | - created dynamically (by redirect)
|
|
0x20 | - modified dynamically (by redirect)
|
|
0x40 | - message confirmed
|
|
0x80 | - subnet mask present
|
|
0x100 | - generate new routes on use
|
|
0x200 | - external daemon resolves name
|
|
0x400 | - generated by ARP
|
|
0x800 | - manually added (static)
|
|
0x1000 | - just discard packets (during updates)
|
|
0x2000 | - modified by management protocol
|
|
0x4000 | - protocol specific routing flag
|
|
0x8000 | - protocol specific routing flag
|
|
|
|
For example, if the entry in the Routing Table has a flag
|
|
value of decimal 5, (0x1 OR'ed with 0x4), then this route
|
|
is 'up' and usable and is host-specific."
|
|
::= { rcL3IpRouteEntry 12 }
|
|
|
|
rcL3IpRouteRef OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Not implemented. Returns '0'.
|
|
|
|
Contains the information required for the netstat 'Ref'
|
|
field, which indicates the number active uses for this
|
|
route."
|
|
::= { rcL3IpRouteEntry 13 }
|
|
|
|
rcL3IpRouteUse OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Not implemented. Returns '0'.
|
|
|
|
Contains the information required for the netstat 'Use'
|
|
field, which indicates the number of packets sent with
|
|
this route."
|
|
::= { rcL3IpRouteEntry 14 }
|
|
|
|
rcL3IpRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the status of this entry. A row in this
|
|
table must be created using the createAndWait(5) action state
|
|
(i.e., createAndGo(4) is not supported). This object can only
|
|
be set to active(1) for the specified 'rcL3IpRouteDest' index
|
|
value after the 'rcL3IpRouteMask' and 'rcL3IpRouteNextHop'
|
|
objects for this row are valid. Setting 'rcL3IpRouteType' is
|
|
optional.
|
|
|
|
Note that the notInService(2) state is not supported. Objects
|
|
in this table row can be changed when this object is notReady(3)
|
|
or active(1)."
|
|
::= { rcL3IpRouteEntry 15 }
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
--
|
|
-- END of ROSE-L3-MIB
|
|
--
|
|
|
|
END
|