Observium_CE/mibs/raisecom/DHCP-CLIENT-MIB

337 lines
13 KiB
Plaintext

--MibName=rcDhcpClient
-- *****************************************************************
-- switch-dhcpclient-mib.mib: Raisecom DHCP Client MIB file
--
-- Aug 2007, wumingyu
--
-- Copyright (c) 1994-2007 by Raisecom Technology Co., Ltd.
-- All rights reserved.
--
-- *****************************************************************
-- *****************************************************************
-- Modi Report£ºFormat: <number>, <time>, <author>, <desc>
--
-- 02, 20110803, yzh, change the status of rcDhcpClientRequestVlans
-- from current to deprecated
-- 01, 20080521, wumingyu, add node rcDhcpClientRequestSpecifySvr
-- 02, 20110811,huangyuanyuan,bugROS00002181
-- *****************************************************************
DHCP-CLIENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP FROM SNMPv2-CONF
Vlanset FROM SWITCH-TC
iscomSwitch FROM RAISECOM-BASE-MIB;
rcDhcpClient MODULE-IDENTITY
LAST-UPDATED "200708300000Z"
ORGANIZATION "Raisecom Technology Co., Ltd."
CONTACT-INFO
"Raisecom Systems
Postal: No.617/619 Haitai Tower,
229 Fourth North Loop Middle Road,
Haidian District, Beijing, PRC
Tel: +86-10-82884499
E-mail: wumingyu@raisecom.com"
DESCRIPTION
"The MIB module is for configuration of DHCP Client
feature. DHCP Client could obtain an IP configuration
from DHCP Server, as well as other request options,
including option 66, option67, option150 and so forth."
REVISION "200708300000Z"
DESCRIPTION
"The initial revision of this MIB module."
::= { iscomSwitch 25 }
------------------------------------------------------------------------------
-- define groups in rcDhcpClient
------------------------------------------------------------------------------
rcDhcpClientMibObjects
OBJECT IDENTIFIER ::= { rcDhcpClient 1 }
------------------------------------------------
-- rcDhcpClientRequestTable--
------------------------------------------------
rcDhcpClientRequestTable OBJECT-TYPE
SYNTAX SEQUENCE OF RcDhcpClientRequestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table provides the mechanism to control DHCP Client per ip interface."
::= { rcDhcpClientMibObjects 1 }
rcDhcpClientRequestEntry OBJECT-TYPE
SYNTAX RcDhcpClientRequestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entry for dhcp client request table based on ip interface."
INDEX { rcDhcpClientRequestIfIndex }
::= { rcDhcpClientRequestTable 1 }
RcDhcpClientRequestEntry ::= SEQUENCE
{
rcDhcpClientRequestIfIndex INTEGER,
rcDhcpClientRequestHostname OCTET STRING,
rcDhcpClientRequestClassid OCTET STRING,
rcDhcpClientRequestClientid OCTET STRING,
rcDhcpClientRequestVlans Vlanset,
rcDhcpClientRequestOperationType INTEGER,
rcDhcpClientRequestOperationStates INTEGER,
rcDhcpClientRequestIpAddress IpAddress,
rcDhcpClientRequestDefaultGateway IpAddress,
rcDhcpClientRequestSubnetMask IpAddress,
rcDhcpClientRequestLeaseStarts Unsigned32,
rcDhcpClientRequestLeaseEnds Unsigned32,
rcDhcpClientRequestLeaseDuration Unsigned32,
rcDhcpClientRequestDhcpSvr IpAddress,
rcDhcpClientRequestTftpSvrName OCTET STRING,
rcDhcpClientRequestTftpSvrAddr IpAddress,
rcDhcpClientRequestStartupConfFile OCTET STRING,
rcDhcpClientRequestResultStates INTEGER,
rcDhcpClientRequestSpecifySvr IpAddress,
rcDhcpClientRequestRootPath OCTET STRING,
rcDhcpClientRequestNtpServer IpAddress
}
rcDhcpClientRequestIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an ip interface which
dhcp client is in. Its value is always MAX_PORT_NUM + 1 currently.
'MAX_PORT_NUM' is the PHY port number of a switch."
::= { rcDhcpClientRequestEntry 1}
rcDhcpClientRequestHostname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the hostname of dhcp client.
Its default value is 'Raisecom'"
::= { rcDhcpClientRequestEntry 2 }
rcDhcpClientRequestClassid OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the class identifier of dhcp client.
Its default value is 'Raisecom-ROS_VERSION'. 'ROS_VERSION'
is the plat version for ROS."
::= { rcDhcpClientRequestEntry 3 }
rcDhcpClientRequestClientid OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the client identifier of dhcp client.
Its default value is 'Raisecom-SYS_MAC-IF0'. 'SYS_MAX' is
the MacAddress of the switch."
::= { rcDhcpClientRequestEntry 4 }
rcDhcpClientRequestVlans OBJECT-TYPE
SYNTAX Vlanset
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The object indicates the vlans which dhcp client is in.
If it takes set operation on this node, it should take
the set operation(value request(2)) on node
rcDhcpClientRequestOperationType together."
::= { rcDhcpClientRequestEntry 5}
rcDhcpClientRequestOperationType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
request (2),
renew(3),
release(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates the dhcp client operation type.
The type none(1) is just for the get operation(that is, when get
operation on this node, it always returns none(1)),
type request(2) indicates that dhcp client starts a dhcp process,
type renew(3) indicates that dhcp client starts renewing,
type release(4) indicates that dhcp client releases the ip address
which was got from dhcp server."
::= { rcDhcpClientRequestEntry 6}
rcDhcpClientRequestOperationStates OBJECT-TYPE
SYNTAX INTEGER
{
initialize(1),
requesting (2),
requestsuccessfully(3),
requestgetfailed(4),
requestconfigfailed(5),
renewing(6),
renewsuccessfully(7),
renewfailed(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the dhcp client operation states.
The state initialize(1) indicates that no dhcp client operation
is done before, state requesting (2) indicates that dhcp client
is requesting ip address, state requestsuccessfully (3) indicates that
dhcp client gets ip address and config it successfully, state
requestgetfailed(4) indicates that dhcp client doesn't get ip address
from dhcp server, state requestconfigfailed(5) indicates that dhcp client
has got ip address from dhcp server but failed on ip config, state renewing(6)
indicates that dhcp is renewing, state renewsuccessfully(7) indicates that
dhcp client renews successfully, state renewfailed(8) indicates that
dhcp client renews failed."
::= { rcDhcpClientRequestEntry 7}
rcDhcpClientRequestIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the ip address which dhcp client requires from dhcp server."
::= { rcDhcpClientRequestEntry 8}
rcDhcpClientRequestDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the default gateway address which dhcp client requires from dhcp server."
::= { rcDhcpClientRequestEntry 9}
rcDhcpClientRequestSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the subnet mask address which dhcp client requires from dhcp server."
::= { rcDhcpClientRequestEntry 10}
rcDhcpClientRequestLeaseStarts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the lease start time which dhcp client requires from dhcp server."
::= { rcDhcpClientRequestEntry 11}
rcDhcpClientRequestLeaseEnds OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the lease expire time which dhcp client requires from dhcp server."
::= { rcDhcpClientRequestEntry 12}
rcDhcpClientRequestLeaseDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the lease duration which dhcp client requires from dhcp server."
::= { rcDhcpClientRequestEntry 13}
rcDhcpClientRequestDhcpSvr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the dhcp server which dhcp client requires ip address from."
::= { rcDhcpClientRequestEntry 14}
rcDhcpClientRequestTftpSvrName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the tftp server name which dhcp client requires from dhcp server."
::= { rcDhcpClientRequestEntry 15}
rcDhcpClientRequestTftpSvrAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the tftp server address which dhcp client requires from dhcp server."
::= { rcDhcpClientRequestEntry 16}
rcDhcpClientRequestStartupConfFile OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the startup configuration file name which dhcp client requires from dhcp server."
::= { rcDhcpClientRequestEntry 17}
rcDhcpClientRequestResultStates OBJECT-TYPE
SYNTAX INTEGER
{
unavailable(1),
available(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the current states of dhcp client request information.
The state unavailable(1) indicates that dhcp client request information
isn't available currently while state available(2) indicates that dhcp client
request information is available currently."
::= { rcDhcpClientRequestEntry 18}
rcDhcpClientRequestSpecifySvr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the dhcp server which dhcp client specified.
Its default value is (0.0.0.0).
The value(0.0.0.0) indicates that dhcp client doesn't specify any dhcp server."
::= { rcDhcpClientRequestEntry 19}
rcDhcpClientRequestRootPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This option specifies the path-name that contains the client's root
disk. The path is formatted as a character string consisting of
characters from the NVT ASCII character set"
::= { rcDhcpClientRequestEntry 20}
rcDhcpClientRequestNtpServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This option specifies first NTP server ip address in NTP
servers available to the client. "
::= { rcDhcpClientRequestEntry 21}
-- end rcDhcpClientRequestTable--
END