2426 lines
62 KiB
Plaintext
2426 lines
62 KiB
Plaintext
-- ********************************************************************
|
|
-- * Wireless LAN Access Point Management Base
|
|
-- ********************************************************************
|
|
|
|
WAG302 DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
ifIndex
|
|
FROM RFC1213-MIB
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
enterprises, IpAddress,Unsigned32, OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
DisplayString, RowStatus, TruthValue, MacAddress
|
|
FROM SNMPv2-TC;
|
|
|
|
--
|
|
-- Node definitions
|
|
--
|
|
|
|
-- The Enterprises Number
|
|
-- 1.3.6.1.4.1.4526
|
|
netgear OBJECT IDENTIFIER ::= { enterprises 4526 }
|
|
|
|
|
|
-- 1.3.6.1.4.1.4526.4
|
|
wireless OBJECT IDENTIFIER ::= { netgear 4 }
|
|
|
|
-- ********************************************************************
|
|
-- * MODULE IDENTITY
|
|
-- ********************************************************************
|
|
wag302 MODULE-IDENTITY
|
|
LAST-UPDATED "200512131300Z" -- 12 13, 2005 at 13:00 GMT
|
|
ORGANIZATION
|
|
"NETGEAR Inc."
|
|
CONTACT-INFO
|
|
"4500 Great America Parkway
|
|
Santa Clara, California 95054
|
|
Phone: (408) 907-8000
|
|
Fax: (408) 907-8097
|
|
Web Site: http://www.netgear.com"
|
|
DESCRIPTION
|
|
"The MIB module for 802.11a/b/g ProSafe Wireless Access Point entities.
|
|
iso(1).org(3).dod(6).internet(1).private(4).
|
|
enterprises(1).netgear(4526).wireless(4).wag302(7)"
|
|
::= { wireless 7 }
|
|
|
|
-- Wireless LAN Access Point Identifier
|
|
--
|
|
-- **********************************************************************
|
|
-- * MIB attribute OBJECT-TYPE definitions follow
|
|
-- **********************************************************************
|
|
-- **********************************************************************
|
|
-- * IP Setting Table
|
|
-- **********************************************************************
|
|
lanSettings OBJECT IDENTIFIER ::= { wag302 1 }
|
|
|
|
|
|
apName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the name of AP. The name is also the NETBIOS name of the AP."
|
|
::= { lanSettings 1 }
|
|
|
|
sysMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field indicates the system MAC Address."
|
|
::= { lanSettings 2 }
|
|
|
|
sysVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field indicates the system firmware version."
|
|
::= { lanSettings 3 }
|
|
|
|
sysCountryRegion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unitedArabEmirates(784),
|
|
albania(8),
|
|
armenia(51),
|
|
argentina(32),
|
|
austria(40),
|
|
australia(36),
|
|
azerbaijan(31),
|
|
belgium(56),
|
|
bulgaria(100),
|
|
bahrain(48),
|
|
brunei(96),
|
|
bolivia(68),
|
|
brazil(76),
|
|
belarus(112),
|
|
belize(84),
|
|
canada(124),
|
|
switzerland(756),
|
|
chile(152),
|
|
china(156),
|
|
colombia(170),
|
|
costaRica(188),
|
|
cyprus(196),
|
|
czechRepublic(203),
|
|
germany(276),
|
|
denmark(208),
|
|
dominicanRepublic(214),
|
|
algeria(12),
|
|
ecuador(218),
|
|
estonia(233),
|
|
egypt(818),
|
|
spain(724),
|
|
finland(246),
|
|
france(250),
|
|
unitedKingdom(826),
|
|
georgia(268),
|
|
greece(300),
|
|
guatemala(320),
|
|
hongkong(344),
|
|
honduras(340),
|
|
croatia(191),
|
|
hungary(348),
|
|
indonesia(360),
|
|
ireland(372),
|
|
israel(376),
|
|
india(356),
|
|
iran(364),
|
|
iceland(352),
|
|
italy(380),
|
|
jordan(400),
|
|
japan(392),
|
|
northKorea(408),
|
|
koreaRepublic(410),
|
|
kuwait(414),
|
|
kazakhstan(398),
|
|
lebanon(422),
|
|
liechtenstein(438),
|
|
lithuania(440),
|
|
luxembourg(442),
|
|
latvia(428),
|
|
marocco(504),
|
|
monaco(492),
|
|
macedonia(807),
|
|
macau(446),
|
|
malta(470),
|
|
mexico(484),
|
|
malaysia(458),
|
|
netherlands(528),
|
|
norway(578),
|
|
newZealand(554),
|
|
oman(512),
|
|
panama(591),
|
|
peru(604),
|
|
philippines(608),
|
|
pakistan(586),
|
|
poland(616),
|
|
puertoRico(630),
|
|
portugal(620),
|
|
qatar(634),
|
|
romania(642),
|
|
russia(643),
|
|
saudiArabia(682),
|
|
sweden(752),
|
|
singapore(702),
|
|
slovakRepublic(703),
|
|
slovenia(705),
|
|
elSalvador(222),
|
|
syria(760),
|
|
thailand(764),
|
|
tunisia(788),
|
|
turkey(792),
|
|
trinidadandTobago(780),
|
|
taiwan(158),
|
|
ukraine(804),
|
|
unitedStates(840),
|
|
uruguay(858),
|
|
uzbekistan(860),
|
|
venezuela(862),
|
|
vietnam(704),
|
|
yemen(887),
|
|
southAfrica(710),
|
|
zimbabwe(716)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the region of operation
|
|
for which which the wireless interface is intended."
|
|
::= { lanSettings 4 }
|
|
|
|
|
|
adminName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The field indicates the administrator name."
|
|
::= { lanSettings 5 }
|
|
|
|
|
|
adminPasswd OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The field indicates the administrator password.
|
|
The AP can be managed in such way as utility,telnet
|
|
and so on."
|
|
::= { lanSettings 6 }
|
|
|
|
|
|
dhcpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
static(0),
|
|
dhcpclient(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether dhcp client status."
|
|
::= { lanSettings 7 }
|
|
|
|
|
|
ipAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the IP address of AP on the wireless
|
|
interface,when worked in router or router/bridge mode.
|
|
Ethernet and wireless interface share the same IP address,
|
|
when worked in bridge mode. "
|
|
::= { lanSettings 8 }
|
|
|
|
|
|
netmaskAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the netmask of AP on the wireless
|
|
interface,when worked in router or router/bridge mode.
|
|
Ethernet and wireless interface share the same netmask
|
|
address,when worked in bridge mode. "
|
|
::= { lanSettings 9 }
|
|
|
|
|
|
gatewayAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the gateway of AP on the wireless
|
|
interface,when worked in router or router/bridge mode.
|
|
Ethernet and wireless interface share the same gateway
|
|
address,when worked in bridge mode. "
|
|
::= { lanSettings 10 }
|
|
|
|
|
|
pridnsipAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attributes shall indicates the IP address of the primary DNS server.
|
|
***The value can only be set to an IP address in dot format."
|
|
::= { lanSettings 11 }
|
|
|
|
|
|
snddnsipAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attributes shall indicates the IP address of the secondary DNS server.
|
|
***The value can only be set to an IP address in dot format."
|
|
::= { lanSettings 12 }
|
|
|
|
|
|
spantree OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate spanning tree."
|
|
::= { lanSettings 13 }
|
|
|
|
|
|
vlanEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether enable VLAN(802.1Q)."
|
|
::= { lanSettings 14 }
|
|
|
|
|
|
managementVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the Management VLAN ID. "
|
|
::= { lanSettings 15 }
|
|
|
|
untaggedVlanID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4094)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the Untagged VLAN ID. "
|
|
::= { lanSettings 16}
|
|
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * Wireless Settings Table
|
|
-- **********************************************************************
|
|
wlanSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"wlanSettingsallow for multiple instances on an agent."
|
|
::= { wag302 2 }
|
|
|
|
|
|
wlanSettingEntry OBJECT-TYPE
|
|
SYNTAX WlanSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the wlanSettingTable. It is possible for
|
|
there to be multiple AP interfaces on one agent,
|
|
each with its unique MAC address. The relationship
|
|
between an AP interface and an interface in the context
|
|
of the Internet-standard MIB is one-to-one.
|
|
As such, the value of an ifIndex object instance can be
|
|
directly used to identify corresponding instances of the
|
|
objects defined herein. "
|
|
INDEX { ifIndex }
|
|
::= { wlanSettingTable 1 }
|
|
|
|
|
|
WlanSettingEntry ::=
|
|
SEQUENCE {
|
|
operatemode
|
|
INTEGER,
|
|
radioEnable
|
|
TruthValue,
|
|
channel
|
|
INTEGER,
|
|
datarate
|
|
INTEGER,
|
|
wmmSupport
|
|
TruthValue,
|
|
beaconinterval
|
|
INTEGER,
|
|
rtsthreshold
|
|
INTEGER,
|
|
fraglength
|
|
INTEGER,
|
|
dtiminterval
|
|
INTEGER,
|
|
preambletype
|
|
INTEGER,
|
|
txpower
|
|
INTEGER,
|
|
superG
|
|
TruthValue,
|
|
accessControlMode
|
|
INTEGER,
|
|
antenna
|
|
INTEGER
|
|
}
|
|
|
|
operatemode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(0),
|
|
dot11a(1),
|
|
dot11b(2),
|
|
dot11g(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the desired wireless operating mode.
|
|
The option are:
|
|
auto - Both 802.11g and 802.11b wireless stations can be used.
|
|
dot11a - Only 802.11a wireless stations can be used.
|
|
dot11b - All 802.11b wireless stations can be used.
|
|
802.11g wireless stations can still be used
|
|
if they can operate in 802.11b mode.
|
|
dot11g - Only 802.11g wireless stations can be used."
|
|
::= { wlanSettingEntry 1 }
|
|
|
|
|
|
radioEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether the radio is enabled."
|
|
::= { wlanSettingEntry 2 }
|
|
|
|
|
|
channel OBJECT-TYPE
|
|
SYNTAX INTEGER (1..165)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the channel number to be
|
|
used."
|
|
::= { wlanSettingEntry 3 }
|
|
|
|
|
|
datarate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
best(0),
|
|
rate1Mbps(1000),
|
|
rate2Mbps(2000),
|
|
rate5dot5Mbps(5500),
|
|
rate6Mbps(6000),
|
|
rate9Mbps(9000),
|
|
rate11Mbps(11000),
|
|
rate12Mbps(12000),
|
|
rate18Mbps(18000),
|
|
rate24Mbps(24000),
|
|
rate36Mbps(36000),
|
|
rate48Mbps(48000),
|
|
rate54Mbps(54000)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the transmite rate. When
|
|
the operatemode is:
|
|
|
|
auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s,
|
|
5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9Mb/s,
|
|
12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s,
|
|
48:48Mb/s, and 54:54Mb/s.
|
|
|
|
dot11a(1) - can set to 0:best, 6:6Mb/s, 9:9Mb/s,
|
|
12:12Mb/s, 18:18Mb/s, 24:24Mb/s,
|
|
36:36Mb/s, 48:48Mb/s and 54:54Mb/s.
|
|
|
|
dot11b(2) - can set to 0:best, 1:1Mb/s, 2:2Mb/s,
|
|
5.5:5.5Mb/s, and 11:11 Mb/s.
|
|
|
|
dot11g(3) - can set to 0:best, 6:6Mb/s, 9:9Mb/s,
|
|
12:12Mb/s, 18:18Mb/s, 24:24Mb/s,
|
|
36:36Mb/s, 48:48Mb/s and 54:54Mb/s."
|
|
::= { wlanSettingEntry 4 }
|
|
|
|
|
|
wmmSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field indicates whether support WMM(Wireless Multimedia)."
|
|
::= { wlanSettingEntry 5 }
|
|
|
|
|
|
beaconinterval OBJECT-TYPE
|
|
SYNTAX INTEGER (20..1000)
|
|
UNITS "1024 microsecond"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the Beacon Interval."
|
|
::= { wlanSettingEntry 6 }
|
|
|
|
|
|
rtsthreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2346)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the RTS threshold."
|
|
::= { wlanSettingEntry 7}
|
|
|
|
|
|
fraglength OBJECT-TYPE
|
|
SYNTAX INTEGER (256..2346)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the fragmentation threshold."
|
|
::= { wlanSettingEntry 8 }
|
|
|
|
|
|
dtiminterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the DTIM period."
|
|
::= { wlanSettingEntry 9 }
|
|
|
|
|
|
preambletype OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
long(0),
|
|
auto(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the preamble setting.
|
|
This setting is only applicable to 802.11b mode."
|
|
::= { wlanSettingEntry 10 }
|
|
|
|
|
|
txpower OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
full(0),
|
|
half(1),
|
|
quarter(2),
|
|
eighth(3),
|
|
min(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the tranmiste power."
|
|
::= { wlanSettingEntry 11 }
|
|
|
|
|
|
superG OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether super mode (super-A
|
|
for 11a radio, Super-G for 11g radio) is enabled."
|
|
::= { wlanSettingEntry 12 }
|
|
|
|
accessControlMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
disabled(0),
|
|
local(2),
|
|
server(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates whether the access control list is
|
|
enabled and the source of the database of the access
|
|
control list."
|
|
::= { wlanSettingEntry 13 }
|
|
|
|
antenna OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
auto(0),
|
|
primary(1),
|
|
secondary(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This attribute shall indicate the tranmistted power."
|
|
::= { wlanSettingEntry 14 }
|
|
|
|
|
|
vapSetting OBJECT IDENTIFIER ::= { wag302 3 }
|
|
|
|
|
|
vapWepAndGlobalSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VapWepAndGlobalSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VAP attributes setting table."
|
|
::= { vapSetting 1 }
|
|
|
|
|
|
vapWepAndGlobalSettingEntry OBJECT-TYPE
|
|
SYNTAX VapWepAndGlobalSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" VAP attributes setting table."
|
|
INDEX { ifIndex ,vapIndex }
|
|
::= { vapWepAndGlobalSettingTable 1 }
|
|
|
|
|
|
VapWepAndGlobalSettingEntry ::=
|
|
SEQUENCE {
|
|
wepKeyType
|
|
INTEGER,
|
|
key1
|
|
DisplayString,
|
|
key2
|
|
DisplayString,
|
|
key3
|
|
DisplayString,
|
|
key4
|
|
DisplayString,
|
|
wepPassPhrase
|
|
DisplayString
|
|
}
|
|
|
|
|
|
wepKeyType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
hex64(40),
|
|
hex128(104),
|
|
hex152(128),
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field shall indicate the type of WEP key."
|
|
::= { vapWepAndGlobalSettingEntry 1 }
|
|
|
|
|
|
key1 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the key value of the first default wep key."
|
|
::= { vapWepAndGlobalSettingEntry 2 }
|
|
|
|
|
|
key2 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the key value of the second default wep key."
|
|
::= { vapWepAndGlobalSettingEntry 3 }
|
|
|
|
|
|
key3 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the key value of the third default wep key."
|
|
::= { vapWepAndGlobalSettingEntry 4 }
|
|
|
|
|
|
key4 OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..40))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the key value of the fourth default wep key."
|
|
::= { vapWepAndGlobalSettingEntry 5 }
|
|
|
|
|
|
wepPassPhrase OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..39))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate WEP pass phrase, used to
|
|
generate four WEP keys."
|
|
::= { vapWepAndGlobalSettingEntry 6 }
|
|
|
|
|
|
|
|
vapSettingTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VapSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VAP attributes setting table."
|
|
::= { vapSetting 2 }
|
|
|
|
|
|
vapSettingEntry OBJECT-TYPE
|
|
SYNTAX VapSettingEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VAP attributes setting table."
|
|
INDEX { ifIndex, vapIndex }
|
|
::= { vapSettingTable 1 }
|
|
|
|
|
|
VapSettingEntry ::=
|
|
SEQUENCE {
|
|
vapIndex
|
|
INTEGER,
|
|
vapEnable
|
|
TruthValue,
|
|
ssid
|
|
DisplayString,
|
|
hidenetworkname
|
|
TruthValue,
|
|
vlanID
|
|
INTEGER,
|
|
securityProfileName
|
|
DisplayString,
|
|
presharekey
|
|
DisplayString,
|
|
authenticationtype
|
|
INTEGER,
|
|
encryption
|
|
INTEGER,
|
|
keyno
|
|
INTEGER,
|
|
wlanseparator
|
|
TruthValue
|
|
}
|
|
|
|
vapIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { vapSettingEntry 1 }
|
|
|
|
|
|
vapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether enable VAP.
|
|
"
|
|
::= { vapSettingEntry 2 }
|
|
|
|
|
|
ssid OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate SSID.Its length can't be large than 33 ."
|
|
::= { vapSettingEntry 3 }
|
|
|
|
|
|
hidenetworkname OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether broadcast wireless network Name (SSID)."
|
|
::= { vapSettingEntry 4 }
|
|
|
|
|
|
vlanID OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the VLAN ID. "
|
|
::= { vapSettingEntry 5 }
|
|
|
|
|
|
securityProfileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { vapSettingEntry 6 }
|
|
|
|
|
|
presharekey OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..63))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate preshare key."
|
|
::= { vapSettingEntry 7 }
|
|
|
|
|
|
authenticationtype OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
open(0),
|
|
shared(1),
|
|
legacy802dot1x(2),
|
|
wpa(4),
|
|
wpa2(8),
|
|
wpaORwpa2(12),
|
|
wpapsk(16),
|
|
wpa2psk(32),
|
|
wpapskORwpa2psk(48)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates how to authenticate the station."
|
|
::= { vapSettingEntry 8 }
|
|
|
|
|
|
encryption OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
wep(1),
|
|
tkip(2),
|
|
aes(4),
|
|
tkipORaes(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates how to encryption the station."
|
|
::= { vapSettingEntry 9 }
|
|
|
|
|
|
keyno OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the number of default wep key."
|
|
::= { vapSettingEntry 10 }
|
|
|
|
|
|
wlanseparator OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether enable No see."
|
|
::= { vapSettingEntry 11 }
|
|
|
|
|
|
-- *********************************************************
|
|
-- Remote Settings Information
|
|
-- *********************************************************
|
|
remoteSettings OBJECT IDENTIFIER ::= { wag302 4 }
|
|
|
|
|
|
sshd OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether the SSH is enabled."
|
|
::= { remoteSettings 1 }
|
|
|
|
|
|
snmpenable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether the SNMP agent is
|
|
enabled."
|
|
::= { remoteSettings 2 }
|
|
|
|
|
|
trapServerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the trap server IP address.
|
|
***The value can only be set to an IP address in dot
|
|
format."
|
|
::= { remoteSettings 3 }
|
|
|
|
trapServerCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the community name for traps."
|
|
::= { remoteSettings 4 }
|
|
|
|
|
|
|
|
readOnlyCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the read only community name.
|
|
***The value can only be set to 1 to 32 readable string."
|
|
::= { remoteSettings 5 }
|
|
|
|
|
|
readWriteCommunity OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The field indicates the read write community name.
|
|
***The value can only be set to 1 to 32 readable string."
|
|
::= { remoteSettings 6 }
|
|
|
|
|
|
-- ***********************************************************************
|
|
-- *Statistic
|
|
-- ***********************************************************************
|
|
statistic OBJECT IDENTIFIER ::= { wag302 5 }
|
|
|
|
|
|
wiredethernetstat OBJECT IDENTIFIER ::= { statistic 1 }
|
|
|
|
|
|
lanrecvpacket OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of received packets."
|
|
::= { wiredethernetstat 1 }
|
|
|
|
|
|
lantranspacket OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of transmitted packets."
|
|
::= { wiredethernetstat 2 }
|
|
|
|
|
|
lanrecvbytes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of received bytes."
|
|
::= { wiredethernetstat 3 }
|
|
|
|
|
|
lantransbytes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of transmitted bytes."
|
|
::= { wiredethernetstat 4 }
|
|
|
|
|
|
wirelessStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WirelessStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { statistic 2 }
|
|
|
|
|
|
wirelessStatEntry OBJECT-TYPE
|
|
SYNTAX WirelessStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
INDEX { ifIndex }
|
|
::= { wirelessStatTable 1 }
|
|
|
|
|
|
WirelessStatEntry ::=
|
|
SEQUENCE {
|
|
wlanrecvunicastpacket
|
|
Unsigned32,
|
|
wlantransunicastpacket
|
|
Unsigned32,
|
|
wlanrecvbroadcastpacket
|
|
Unsigned32,
|
|
wlantransbroadcastpacket
|
|
Unsigned32,
|
|
wlanrecvmulticastpacket
|
|
Unsigned32,
|
|
wlantransmulticastpacket
|
|
Unsigned32,
|
|
wlanrecvpacket
|
|
Unsigned32,
|
|
wlantranspacket
|
|
Unsigned32,
|
|
wlanrecvbytes
|
|
Unsigned32,
|
|
wlantransbytes
|
|
Unsigned32
|
|
}
|
|
|
|
wlanrecvunicastpacket OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of received unicast packets."
|
|
::= { wirelessStatEntry 1 }
|
|
|
|
|
|
wlantransunicastpacket OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of transmitted unicast packets."
|
|
::= { wirelessStatEntry 2 }
|
|
|
|
|
|
wlanrecvbroadcastpacket OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of received broadcast packets."
|
|
::= { wirelessStatEntry 3 }
|
|
|
|
|
|
wlantransbroadcastpacket OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of transmitted broadcast packets."
|
|
::= { wirelessStatEntry 4 }
|
|
|
|
|
|
wlanrecvmulticastpacket OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of received multicast packets."
|
|
::= { wirelessStatEntry 5 }
|
|
|
|
|
|
wlantransmulticastpacket OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of transmitted multicast packets."
|
|
::= { wirelessStatEntry 6 }
|
|
|
|
|
|
wlanrecvpacket OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of received packets."
|
|
::= { wirelessStatEntry 7 }
|
|
|
|
|
|
wlantranspacket OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of transmitted packets."
|
|
::= { wirelessStatEntry 8 }
|
|
|
|
|
|
wlanrecvbytes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of received bytes."
|
|
::= { wirelessStatEntry 9 }
|
|
|
|
|
|
wlantransbytes OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"the field indicates the sum of transmitted bytes."
|
|
::= { wirelessStatEntry 10 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * Station List Table
|
|
-- **********************************************************************
|
|
stationListTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF StationListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"stationList Table show multiple instances on an agent."
|
|
::= { wag302 6 }
|
|
|
|
|
|
stationListEntry OBJECT-TYPE
|
|
SYNTAX StationListEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the wlanClientsTable. It is possible for there
|
|
to be multiple AP interfaces on one agent, each with its
|
|
unique MAC address. The relationship between an AP
|
|
interface and an interface in the context of the Internet-
|
|
standard MIB is one-to-one. As such, the value of an
|
|
ifIndex object instance can be directly used to identify
|
|
corresponding instances of the objects defined herein. "
|
|
INDEX { ifIndex, macaddress }
|
|
::= { stationListTable 1 }
|
|
|
|
|
|
StationListEntry ::=
|
|
SEQUENCE {
|
|
macaddress
|
|
MacAddress,
|
|
clientIpaddr
|
|
IpAddress,
|
|
clientWirelessMode
|
|
INTEGER,
|
|
stationstatus
|
|
INTEGER
|
|
}
|
|
|
|
|
|
macaddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate MAC address of the
|
|
associated stationID."
|
|
::= { stationListEntry 1 }
|
|
|
|
|
|
clientIpaddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate Ip address of the associated stationID."
|
|
::= { stationListEntry 2 }
|
|
|
|
|
|
clientWirelessMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
dot11a(1),
|
|
dot11b(2),
|
|
dot11g(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the wireless mode of the
|
|
associated stationID."
|
|
::= { stationListEntry 3 }
|
|
|
|
|
|
stationstatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none(0),
|
|
authenticating(1),
|
|
authenticated(2),
|
|
associating(3),
|
|
associated(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the status of station."
|
|
::= { stationListEntry 4 }
|
|
|
|
|
|
-- *********************************************************
|
|
-- AP Operation Mode
|
|
-- *********************************************************
|
|
-- ap mode
|
|
wlanWdsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanWdsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"WDS attributes in tablular form to allow for multiple
|
|
instances on an agent."
|
|
::= { wag302 7}
|
|
|
|
|
|
wlanWdsEntry OBJECT-TYPE
|
|
SYNTAX WlanWdsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the wlanWdsTable. It is possible for there to
|
|
be multiple AP interfaces on one agent, each with its
|
|
unique MAC address. The relationship between an AP
|
|
interface and an interface in the context of the Internet-
|
|
standard MIB is one-to-one. As such, the value of an
|
|
ifIndex object instance can be directly used to identify
|
|
corresponding instances of the objects defined herein. "
|
|
INDEX { ifIndex }
|
|
::= { wlanWdsTable 1 }
|
|
|
|
|
|
WlanWdsEntry ::=
|
|
SEQUENCE {
|
|
apmode
|
|
INTEGER,
|
|
ptpremotemacaddress
|
|
MacAddress,
|
|
pxpremotemacaddress1
|
|
MacAddress,
|
|
pxpremotemacaddress2
|
|
MacAddress,
|
|
pxpremotemacaddress3
|
|
MacAddress,
|
|
pxpremotemacaddress4
|
|
MacAddress,
|
|
repremotemacaddress1
|
|
MacAddress,
|
|
repremotemacaddress2
|
|
MacAddress,
|
|
repremotemacaddress3
|
|
MacAddress,
|
|
repremotemacaddress4
|
|
MacAddress,
|
|
localMacAddress
|
|
MacAddress
|
|
}
|
|
|
|
|
|
apmode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
ap(0),
|
|
ptp(2),
|
|
ptp-ap(3),
|
|
pxp(4),
|
|
pxp-ap(5),
|
|
repeater(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This a command field for conntrol AP operation mode. "
|
|
::= { wlanWdsEntry 1 }
|
|
|
|
|
|
ptpremotemacaddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the stationID."
|
|
::= { wlanWdsEntry 2 }
|
|
|
|
|
|
pxpremotemacaddress1 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the stationID."
|
|
::= { wlanWdsEntry 3 }
|
|
|
|
|
|
pxpremotemacaddress2 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the stationID."
|
|
::= { wlanWdsEntry 4 }
|
|
|
|
|
|
pxpremotemacaddress3 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the stationID."
|
|
::= { wlanWdsEntry 5 }
|
|
|
|
|
|
pxpremotemacaddress4 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the stationID."
|
|
::= { wlanWdsEntry 6 }
|
|
|
|
|
|
repremotemacaddress1 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the stationID."
|
|
::= { wlanWdsEntry 7 }
|
|
|
|
|
|
repremotemacaddress2 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the stationID."
|
|
::= { wlanWdsEntry 8 }
|
|
|
|
|
|
repremotemacaddress3 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the stationID."
|
|
::= { wlanWdsEntry 9 }
|
|
|
|
|
|
repremotemacaddress4 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the stationID."
|
|
::= { wlanWdsEntry 10 }
|
|
|
|
localMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the local MAC Address."
|
|
::= { wlanWdsEntry 11 }
|
|
|
|
-- *********************************************************
|
|
-- 802.1x Information
|
|
-- *********************************************************
|
|
info802dot1x OBJECT IDENTIFIER ::= { wag302 8 }
|
|
|
|
|
|
authinfo OBJECT IDENTIFIER ::= { info802dot1x 1 }
|
|
|
|
|
|
priradipaddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internet address of the Primary Radius Server."
|
|
::= { authinfo 1 }
|
|
|
|
|
|
priradport OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port number used for authentication at the
|
|
Primary Radius Server."
|
|
::= { authinfo 2 }
|
|
|
|
|
|
priradsharedsecret OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secret shared between NAS and the Primary Radius Server."
|
|
::= { authinfo 3 }
|
|
|
|
sndradipaddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Internet address of the Second Radius Server."
|
|
::= { authinfo 4 }
|
|
|
|
sndradport OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port number used for authentication at
|
|
the Second Radius Server."
|
|
::= { authinfo 5 }
|
|
|
|
|
|
sndradsharedsecret OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secret shared between NAS and the Second Radius Server."
|
|
::= { authinfo 6 }
|
|
|
|
|
|
-- The primary account RADIUS server setting.
|
|
accntinfo OBJECT IDENTIFIER ::= { info802dot1x 2 }
|
|
|
|
|
|
priacntipaddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the Primary radius account server."
|
|
::= { accntinfo 1 }
|
|
|
|
|
|
priacntport OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port number of the Primary radius account server."
|
|
::= { accntinfo 2 }
|
|
|
|
|
|
priacntsharedsecret OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"password used by the ap to connect to the Primary radius account serve."
|
|
::= { accntinfo 3 }
|
|
|
|
sndacntipaddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IP address of the Second radius account server."
|
|
::= { accntinfo 4 }
|
|
|
|
|
|
sndacntport OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port number of the Second radius account server."
|
|
::= { accntinfo 5 }
|
|
|
|
|
|
sndacntsharedsecret OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..127))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"password used by the ap to connect to the Second radius account server."
|
|
::= { accntinfo 6 }
|
|
|
|
|
|
-- acntcurloginstat OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Current Login Status."
|
|
-- ::= { accntinfo 7 }
|
|
-- *********************************************************
|
|
-- Command Information
|
|
-- *********************************************************
|
|
-- Command information
|
|
userCommand OBJECT IDENTIFIER ::= { wag302 9 }
|
|
|
|
|
|
resetAP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This a command field for conntrol AP action. Write value 1
|
|
to reset the AP."
|
|
::= { userCommand 1 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * System Basic Setting Table 2005/12/22
|
|
-- ********************************************************************
|
|
timeSettings OBJECT IDENTIFIER ::= { wag302 10 }
|
|
|
|
|
|
currenttime OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..20))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field indicates the current system time in a format:
|
|
YYYY/MM/DD hh:mm:ss."
|
|
::= { timeSettings 1 }
|
|
|
|
|
|
timezone OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
afghanistan(0),
|
|
albania(1),
|
|
algeria(2),
|
|
american-samoa(3),
|
|
andorra(4),
|
|
angola(5),
|
|
anguilla(6),
|
|
antigua-and-barbuda(7),
|
|
argentina(8),
|
|
armenia(9),
|
|
aruba(10),
|
|
australia-lordHoweIsland(11),
|
|
australia-new-south-wales-capitol-territory-victoria(12),
|
|
australia-northern-territory(13),
|
|
australia-queensland(14),
|
|
australia-south-australia-and-broken-hill(15),
|
|
australia-tasmania(16),
|
|
australia-western(17),
|
|
austria(18),
|
|
azerbaijan(19),
|
|
bahamas(20),
|
|
bahrain(21),
|
|
bangladesh(22),
|
|
barbados(23),
|
|
belarus(24),
|
|
belgium(25),
|
|
belize(26),
|
|
benin(27),
|
|
bermuda(28),
|
|
bhutan(29),
|
|
bolivia(30),
|
|
bonaire(31),
|
|
bosnia-herzegovina(32),
|
|
botswana(33),
|
|
brazil-east-including-all-coast-and-brasilia(34),
|
|
brazil-fernando-de-noronha(35),
|
|
brazil-trinity-of-acre(36),
|
|
brazil-west(37),
|
|
british-virgin-islands(38),
|
|
brunei(39),
|
|
bulgaria(40),
|
|
burkina-faso(41),
|
|
burma(42),
|
|
burundi(43),
|
|
cambodia(44),
|
|
cameroon(45),
|
|
canada-atlantic(46),
|
|
canada-central(47),
|
|
canada-eastern(48),
|
|
canada-mountain(49),
|
|
canada-newfoundland(50),
|
|
canada-pacific-and-yukon(51),
|
|
canada-saskatchewan(52),
|
|
cape-verde(53),
|
|
cayman-islands(54),
|
|
central-african-republic(55),
|
|
chad(56),
|
|
chile(57),
|
|
chile-easter-island(58),
|
|
china(59),
|
|
christmas-islands(60),
|
|
cocos-keeling-islands(61),
|
|
colombia(62),
|
|
congo(63),
|
|
cook-islands(64),
|
|
costa-rica(65),
|
|
cote-d-ivoire(66),
|
|
croatia(67),
|
|
cuba(68),
|
|
curacao(69),
|
|
cyprus(70),
|
|
czech-republic(71),
|
|
denmark(72),
|
|
djibouti(73),
|
|
dominica(74),
|
|
the-dominican-republic(75),
|
|
ecuador(76),
|
|
ecuador-galapagos-islands(77),
|
|
egypt(78),
|
|
el-salvador(79),
|
|
equatorial-guinea(80),
|
|
eritrea(81),
|
|
estonia(82),
|
|
ethiopia(83),
|
|
faroe-islands(84),
|
|
fiji(85),
|
|
finland(86),
|
|
france(87),
|
|
french-guiana(88),
|
|
french-polynesia(89),
|
|
gabon(90),
|
|
the-gambia(91),
|
|
georgia(92),
|
|
germany(93),
|
|
ghana(94),
|
|
gibraltar(95),
|
|
greece(96),
|
|
greenland-scorsbysund(97),
|
|
greenland-thule(98),
|
|
grenada(99),
|
|
guadeloupe(100),
|
|
guam(101),
|
|
guatemala(102),
|
|
guinea-bissau(103),
|
|
guyana(104),
|
|
haiti(105),
|
|
hawaii(106),
|
|
honduras(107),
|
|
hong-kong(108),
|
|
hungary(109),
|
|
iceland(110),
|
|
india(111),
|
|
indonesia-central(112),
|
|
indonesia-east(113),
|
|
indonesia-west(114),
|
|
iran(115),
|
|
iraq(116),
|
|
ireland(117),
|
|
israel(118),
|
|
italy(119),
|
|
jamaica(120),
|
|
japan(121),
|
|
johnston-islands(122),
|
|
jordan(123),
|
|
juan-fernandez-islands(124),
|
|
kazakhstan(125),
|
|
kenya(126),
|
|
kiribati(127),
|
|
kuwait(128),
|
|
kyrgyzstan(129),
|
|
laos(130),
|
|
latvia(131),
|
|
lebanon(132)
|
|
leeward-islands(133),
|
|
lesotho(134),
|
|
liberia(135),
|
|
libya(136),
|
|
liechtenstein(137),
|
|
lithuania(138),
|
|
luxembourg(139),
|
|
macao(140),
|
|
macedonia(141),
|
|
madagascar(142),
|
|
malawi(143),
|
|
malaysia(144),
|
|
maldives(145),
|
|
mali(146),
|
|
malta(147),
|
|
mariana-Islands(148),
|
|
martinique(149),
|
|
mauritania(150),
|
|
mauritius(151),
|
|
mayotte(152),
|
|
mexico(153),
|
|
mexico-baj-n(154),
|
|
mexico-baj-s(155),
|
|
midway-islands(156),
|
|
moldova(157),
|
|
monaco(158),
|
|
mongolia(159),
|
|
montenegro(160),
|
|
montserrat(161),
|
|
morocco(162),
|
|
mozambique(163),
|
|
namibia(164),
|
|
nauru(165),
|
|
nepal(166),
|
|
the-netherlands-antilles(167),
|
|
the-netherlands(168),
|
|
new-caledonia(169),
|
|
new-hebrides(170),
|
|
new-zealand9(171),
|
|
new-zealand-chatham-island(172),
|
|
nicaragua(173),
|
|
niger(174),
|
|
nigeria(175),
|
|
niue-islands(176),
|
|
norfolk-island(177),
|
|
north-korea(178),
|
|
norway(179),
|
|
oman(180),
|
|
pakistan(181),
|
|
palau(182),
|
|
panama(183),
|
|
papua-new-guinea(184),
|
|
paraguay(185),
|
|
peru(186),
|
|
philippines(187),
|
|
pitcairn-island(188),
|
|
poland(189),
|
|
portugal-azores(190),
|
|
portugal-madeira(191),
|
|
puerto-rico(192),
|
|
qatar(193),
|
|
reunion(194),
|
|
romania(195),
|
|
russia-moscow(196),
|
|
russian-fed-zone-1-kaliningrad(197),
|
|
russian-fed-zone-10-magadan(198),
|
|
russian-fed-zone-11-petropavlovsk-kamchatsky(199),
|
|
russian-fed-zone-2-st-petersburg(200),
|
|
russian-fed-zone-3-izhevsk(201),
|
|
russian-fed-zone-4-ekaterinburg(202),
|
|
russian-fed-zone-5-novosibirsk(203),
|
|
russian-fed-zone-6-krasnojarsk(204),
|
|
russian-fed-zone-7-irkutsk(205),
|
|
russian-fed-zone-8-yakatsk(206),
|
|
russian-fed-zone-9-vladivostok(207),
|
|
rwanda(208),
|
|
saint-pierre-and-miquelon(209),
|
|
san-marino(210),
|
|
sao-tome-and-principe(211),
|
|
saudi-arabia(212),
|
|
senegal(213),
|
|
serbia(214),
|
|
the-seychelles(215),
|
|
sierra-leone(216),
|
|
singapore(217),
|
|
slovakia(218),
|
|
slovenia(219),
|
|
solomon-islands(220),
|
|
somalia(221),
|
|
south-africa(222),
|
|
south-georgia(223),
|
|
south-korea(224),
|
|
spain(225),
|
|
spain-canary-islands(226),
|
|
sri-lanka(227),
|
|
st-helena(228),
|
|
st-kitts-nevis(229),
|
|
st-lucia(230),
|
|
st-vincent-and-the-grenadines(231),
|
|
sudan(232),
|
|
suriname(233),
|
|
swaziland(234),
|
|
sweden(235),
|
|
switzerland(236),
|
|
syria(237),
|
|
tahiti(238),
|
|
taiwan(239),
|
|
tajikistan(240),
|
|
tanzania(241),
|
|
thailand(242),
|
|
togo(243),
|
|
tonga(244),
|
|
trinidad-and-tobago(245),
|
|
tunisia(246),
|
|
turkey(247),
|
|
turkmenistan(248),
|
|
turks-and-caicos-islands(249),
|
|
tuvalu(250),
|
|
uganda(251),
|
|
ukraine(252),
|
|
ukraine-simferopol(253),
|
|
united-arab-emirates(254),
|
|
united-kingdom(255),
|
|
uruguay(256),
|
|
us-virgin-islands(257),
|
|
usa-alaska(258),
|
|
usa-aleutian-islands(259)
|
|
usa-arizona(260),
|
|
usa-central(261),
|
|
usa-eastern(262),
|
|
usa-indiana(263),
|
|
usa-mountain(264),
|
|
usa-pacific(265),
|
|
uzbekistan(266),
|
|
vanuatu(267),
|
|
vatican-city(268),
|
|
venezuela(269),
|
|
vietnam(270),
|
|
wake-islands(271),
|
|
wallis-and-futana-islands(272),
|
|
western-samoa(273),
|
|
windward-islands(274),
|
|
yemen(275),
|
|
zaire-kasai(276),
|
|
zaire-kinshasa(277),
|
|
zambia(278),
|
|
zimbabwe(279)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field indicates the timezone of the system."
|
|
::= { timeSettings 2 }
|
|
|
|
|
|
daylightsaving OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the Daylight Saving time."
|
|
::= { timeSettings 3 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * DHCP Server Setting Table 2004/6/17
|
|
-- **********************************************************************
|
|
dhcpsSettings OBJECT IDENTIFIER ::= { wag302 11 }
|
|
|
|
|
|
dhcpserver OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether DHCP server is enable
|
|
or disable."
|
|
::= { dhcpsSettings 1 }
|
|
|
|
|
|
dhcpsipstart OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the starting IP address of DHCP server will give.
|
|
***The value can only be set to a IP address in dot format."
|
|
::= { dhcpsSettings 2 }
|
|
|
|
|
|
dhcpsipend OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the ending IP address of DHCP server will give.
|
|
***The value can only be set to a IP address in dot format."
|
|
::= { dhcpsSettings 3 }
|
|
|
|
|
|
dhcpnetmask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the net mask of DHCP server will give.
|
|
***The value can only be set to the net mask address in dot format."
|
|
::= { dhcpsSettings 4 }
|
|
|
|
|
|
dhcpsgateway OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the gateway IP address of DHCP server will give.
|
|
***The value can only be set to a IP address in dot format."
|
|
::= { dhcpsSettings 5 }
|
|
|
|
|
|
dhcpspridns OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the primary DNS IP address of DHCP server will give.
|
|
***The value can only be set to a IP address in dot format."
|
|
::= { dhcpsSettings 6 }
|
|
|
|
dhcpspsnddns OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the secondary DNS IP address of DHCP server will give.
|
|
***The value can only be set to a IP address in dot format."
|
|
::= { dhcpsSettings 7 }
|
|
|
|
|
|
dhcpspriwins OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the primary WINS IP address of DHCP server will give.
|
|
***The value can only be set to a IP address in dot format."
|
|
::= { dhcpsSettings 8 }
|
|
|
|
|
|
dhcpspsndwins OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute indicates the secondary WINS IP address of DHCP server will give.
|
|
***The value can only be set to a IP address in dot format."
|
|
::= { dhcpsSettings 9 }
|
|
|
|
|
|
dhcpsleasetime OBJECT-TYPE
|
|
SYNTAX INTEGER (15..44640)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the IP lease time of DHCP server will give
|
|
to DHCP clients in minutes"
|
|
::= { dhcpsSettings 10 }
|
|
|
|
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * SYSLOG Server Setting Table 2004/8/2
|
|
-- **********************************************************************
|
|
logSettings OBJECT IDENTIFIER ::= { wag302 12 }
|
|
|
|
|
|
syslog OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether syslog is enable
|
|
or disable."
|
|
::= { logSettings 1 }
|
|
|
|
|
|
syslogsrvip OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attributes shall indicates the IP address of the syslog server.
|
|
***The value can only be set to a IP address in dot format."
|
|
::= { logSettings 2 }
|
|
|
|
|
|
syslogsrvport OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attributes shall indicates the Port of the Syslog server.
|
|
*** The value can only be set to a port in dot format."
|
|
::= { logSettings 3 }
|
|
|
|
-- **********************************************************************
|
|
-- * HTTP Redirect Settings Table
|
|
-- **********************************************************************
|
|
|
|
|
|
|
|
httpRedirectSettings OBJECT IDENTIFIER ::= { wag302 13 }
|
|
|
|
|
|
httpRedirectEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { httpRedirectSettings 1 }
|
|
|
|
|
|
httpRedirectURL OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..119))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Description."
|
|
::= { httpRedirectSettings 2 }
|
|
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * Detected AP Table
|
|
-- **********************************************************************
|
|
detectedApTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DetectedApEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"detectedAp Table shows list of detected neighbouring APs."
|
|
::= { wag302 14 }
|
|
|
|
|
|
detectedApEntry OBJECT-TYPE
|
|
SYNTAX DetectedApEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the detectedApTable."
|
|
INDEX { apmac }
|
|
::= { detectedApTable 1 }
|
|
|
|
|
|
DetectedApEntry ::=
|
|
SEQUENCE {
|
|
apmac
|
|
MacAddress,
|
|
apssid
|
|
DisplayString,
|
|
apprivacy
|
|
TruthValue,
|
|
apband
|
|
DisplayString,
|
|
apchannel
|
|
INTEGER,
|
|
aprate
|
|
INTEGER,
|
|
apbeaconInterval
|
|
INTEGER,
|
|
apnumBeacons
|
|
INTEGER,
|
|
aplastBeacon
|
|
INTEGER
|
|
}
|
|
|
|
|
|
apmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate MAC address of the
|
|
detected AP."
|
|
::= { detectedApEntry 1 }
|
|
|
|
|
|
apssid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate ssid of the detected AP."
|
|
::= { detectedApEntry 2 }
|
|
|
|
|
|
apprivacy OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether privacy is enabled."
|
|
::= { detectedApEntry 3 }
|
|
|
|
|
|
apband OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the operating band of detected AP."
|
|
::= { detectedApEntry 4 }
|
|
|
|
|
|
apchannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the channel number used."
|
|
::= { detectedApEntry 5 }
|
|
|
|
|
|
aprate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the rate."
|
|
::= { detectedApEntry 6 }
|
|
|
|
|
|
apbeaconInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the beacon interval in kus (1.024 ms)."
|
|
::= { detectedApEntry 7 }
|
|
|
|
|
|
apnumBeacons OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the number of beacons received."
|
|
::= { detectedApEntry 8 }
|
|
|
|
|
|
aplastBeacon OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the time of the last beacon."
|
|
::= { detectedApEntry 9 }
|
|
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * Known AP Table
|
|
-- **********************************************************************
|
|
knownApTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF KnownApEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"knownAp Table shows list of known APs."
|
|
::= { wag302 15 }
|
|
|
|
|
|
knownApEntry OBJECT-TYPE
|
|
SYNTAX KnownApEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the knownApTable."
|
|
INDEX { knownapmac }
|
|
::= { knownApTable 1 }
|
|
|
|
|
|
KnownApEntry ::=
|
|
SEQUENCE {
|
|
knownapmac
|
|
MacAddress,
|
|
knownapssid
|
|
DisplayString,
|
|
knownapprivacy
|
|
TruthValue,
|
|
knownapband
|
|
DisplayString,
|
|
knownapchannel
|
|
INTEGER,
|
|
knownaprate
|
|
INTEGER,
|
|
knownapbeaconInterval
|
|
INTEGER,
|
|
knownapnumBeacons
|
|
INTEGER,
|
|
knownaplastBeacon
|
|
INTEGER,
|
|
knownapEntryStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
knownapmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate MAC address of the
|
|
known AP."
|
|
::= { knownApEntry 1 }
|
|
|
|
|
|
knownapssid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate ssid of the known AP."
|
|
::= { knownApEntry 2 }
|
|
|
|
|
|
knownapprivacy OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether privacy is enabled."
|
|
::= { knownApEntry 3 }
|
|
|
|
|
|
knownapband OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the operating band of known AP."
|
|
::= { knownApEntry 4 }
|
|
|
|
|
|
knownapchannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the channel number used."
|
|
::= { knownApEntry 5 }
|
|
|
|
|
|
knownaprate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the rate."
|
|
::= { knownApEntry 6 }
|
|
|
|
|
|
knownapbeaconInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the beacon interval in kus (1.024 ms)."
|
|
::= { knownApEntry 7 }
|
|
|
|
|
|
knownapnumBeacons OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the number of beacons received."
|
|
::= { knownApEntry 8 }
|
|
|
|
|
|
knownaplastBeacon OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the time of the last beacon."
|
|
::= { knownApEntry 9 }
|
|
|
|
|
|
|
|
knownapEntryStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Known AP Entry status.
|
|
|
|
Supported values:
|
|
active(1) - valid entry
|
|
createAndGo(4) - used to create a new entry
|
|
destroy(6) - removes the entry"
|
|
::= { knownApEntry 10 }
|
|
|
|
|
|
-- **********************************************************************
|
|
-- * Unknown AP Table
|
|
-- **********************************************************************
|
|
unknownApTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UnknownApEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"unknownAp Table shows list of unknown APs."
|
|
::= { wag302 16 }
|
|
|
|
|
|
unknownApEntry OBJECT-TYPE
|
|
SYNTAX UnknownApEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the unknownApTable."
|
|
INDEX { unknownapmac }
|
|
::= { unknownApTable 1 }
|
|
|
|
|
|
UnknownApEntry ::=
|
|
SEQUENCE {
|
|
unknownapmac
|
|
MacAddress,
|
|
unknownapssid
|
|
DisplayString,
|
|
unknownapprivacy
|
|
TruthValue,
|
|
unknownapband
|
|
DisplayString,
|
|
unknownapchannel
|
|
INTEGER,
|
|
unknownaprate
|
|
INTEGER,
|
|
unknownapbeaconInterval
|
|
INTEGER,
|
|
unknownapnumBeacons
|
|
INTEGER,
|
|
unknownaplastBeacon
|
|
INTEGER
|
|
}
|
|
|
|
|
|
unknownapmac OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate MAC address of the
|
|
unknown AP."
|
|
::= { unknownApEntry 1 }
|
|
|
|
|
|
unknownapssid OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate ssid of the unknown AP."
|
|
::= { unknownApEntry 2 }
|
|
|
|
|
|
unknownapprivacy OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate whether privacy is enabled."
|
|
::= { unknownApEntry 3 }
|
|
|
|
|
|
unknownapband OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the operating band of unknown AP."
|
|
::= { unknownApEntry 4 }
|
|
|
|
|
|
unknownapchannel OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the channel number used."
|
|
::= { unknownApEntry 5 }
|
|
|
|
|
|
unknownaprate OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the rate."
|
|
::= { unknownApEntry 6 }
|
|
|
|
|
|
unknownapbeaconInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the beacon interval in kus (1.024 ms)."
|
|
::= { unknownApEntry 7 }
|
|
|
|
|
|
unknownapnumBeacons OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the number of beacons received."
|
|
::= { unknownApEntry 8 }
|
|
|
|
|
|
unknownaplastBeacon OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute shall indicate the time of the last beacon."
|
|
::= { unknownApEntry 9 }
|
|
|
|
wlanAccessControlLocalTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WlanAccessControlLocalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ACL attributes in tablular form to allow for multiple
|
|
instances on an agent."
|
|
::= { wag302 17 }
|
|
|
|
|
|
wlanAccessControlLocalEntry OBJECT-TYPE
|
|
SYNTAX WlanAccessControlLocalEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the wlanAccessControlListTable. It is possible
|
|
for there to be multiple AP interfaces on one agent, each
|
|
with its unique MAC address. The relationship between an
|
|
AP interface and an interface in the context of the
|
|
Internet-standard MIB is one-to-one. As such, the value of
|
|
an ifIndex object instance can be directly used to identify
|
|
corresponding instances of the objects defined herein. "
|
|
INDEX { aclMAC }
|
|
::= { wlanAccessControlLocalTable 1 }
|
|
|
|
|
|
WlanAccessControlLocalEntry ::=
|
|
SEQUENCE {
|
|
aclMAC
|
|
MacAddress,
|
|
aclMacStatus
|
|
RowStatus
|
|
}
|
|
|
|
|
|
|
|
aclMAC OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field should indicate an MAC address entry in the
|
|
access control local database. When write this field
|
|
aclMAC=000000000000, shall remove current MAC address from
|
|
local database. Otherwise, shall update the MAC address."
|
|
::= { wlanAccessControlLocalEntry 1 }
|
|
|
|
|
|
aclMacStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ACL Mac status.
|
|
|
|
Supported values:
|
|
active(1) - valid entry
|
|
createAndGo(4) - used to create a new entry
|
|
destroy(6) - removes the entry"
|
|
::= { wlanAccessControlLocalEntry 2 }
|
|
END
|