1691 lines
47 KiB
Plaintext
1691 lines
47 KiB
Plaintext
LUM-SOFTWARE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
DisplayString, TestAndIncr, DateAndTime
|
|
FROM SNMPv2-TC
|
|
lumModules, lumSoftwareMIB
|
|
FROM LUM-REG
|
|
FaultStatus, CommandString, BoardOrInterfaceAdminStatus
|
|
FROM LUM-TC;
|
|
|
|
lumSoftwareMIBModule MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"201809280000Z" -- September 28th 2018
|
|
ORGANIZATION
|
|
"Infinera Corporation"
|
|
CONTACT-INFO
|
|
"techsupport@infinera.com"
|
|
DESCRIPTION
|
|
"The software MIB. Provides configuration, status and commands for SW upgrade and other
|
|
maintenance operations.
|
|
|
|
The tables and groups contained in this MIB are:
|
|
|
|
(1) The General group contains some general attributes such
|
|
as timestamps and table sizes.
|
|
|
|
(2) The Software versions table contains a list of software versions installed on the node.
|
|
|
|
(3) The Command group allows an SNMP client to perform SW upgrade and other maintenance actions.
|
|
|
|
(4) The Software Log table contains SNMP-readable log entries for an ongoing upgrade operation
|
|
|
|
(5) The Notifications group contains trap definitions for software status
|
|
notifications.
|
|
|
|
(6) The Spare Part contains configuration and status used during spare part process.
|
|
|
|
(7) The Expected Software table contains a listing of expected software during an ongoing
|
|
upgrade operation.
|
|
|
|
(8) The CU Replacement group contains configuration, status and alarms related
|
|
to the CU replacement process.
|
|
|
|
"
|
|
REVISION
|
|
"201809280000Z" -- September 28th 2018
|
|
DESCRIPTION
|
|
"Changes made for release 31.1:
|
|
- Added rebootPendingBoards as new softwareCommandOperation option"
|
|
REVISION
|
|
"201706150000Z" -- June 15th 2017
|
|
DESCRIPTION
|
|
"Changes made for release r29.0:
|
|
- Changed ORGANIZATION and CONTACT-INFO.
|
|
- Added removeBoardNeeded to softwareCommandEnmState."
|
|
REVISION
|
|
"201504280000Z" -- April 28 2015
|
|
DESCRIPTION
|
|
"Added a new software command: rebootAllCold
|
|
This command will do a cold restart for all boards."
|
|
REVISION
|
|
"201312220000Z" -- December 22th 2013
|
|
DESCRIPTION
|
|
"Added a new state, upgradeWithouRebootNeeded, for softwareCommandEnm-
|
|
State. This state shows that the node is already running on the SW stated
|
|
in enm-spec. The enm-spec version is not correct although. To get the correct
|
|
enm-spec an upgrade without reboot is needed."
|
|
REVISION
|
|
"201311120000Z" -- November 12th 2013
|
|
DESCRIPTION
|
|
"Added a new state, filesNeeded, for softwareCommandEnmState. This
|
|
state shows that the node has all the software needed for the cards
|
|
currently installed, but software for other cards are not installed."
|
|
REVISION
|
|
"201112200000Z" -- December 20th 2011
|
|
DESCRIPTION
|
|
"Added softwareCuRepSwNotDistributed (warning that CU SW is not distributed)
|
|
softwareCuRepSupportedReplacements (set what CU SW should be required)."
|
|
REVISION
|
|
"201001290000Z" -- January 29th 2010
|
|
DESCRIPTION
|
|
"CuRep as own group + some corrections."
|
|
REVISION
|
|
"200411220000Z" -- November 22nd 2004
|
|
DESCRIPTION
|
|
"Added configure command for spare parts."
|
|
REVISION
|
|
"200406150000Z" -- June 15th 2004
|
|
DESCRIPTION
|
|
"The initial revision of this module."
|
|
::= { lumModules 28 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Conformance area, containing groups and complicance
|
|
-- specifications.
|
|
-- ----------------------------------------------------
|
|
|
|
lumSoftwareConfs OBJECT IDENTIFIER ::= { lumSoftwareMIB 1 }
|
|
lumSoftwareGroups OBJECT IDENTIFIER ::= { lumSoftwareConfs 1 }
|
|
lumSoftwareCompl OBJECT IDENTIFIER ::= { lumSoftwareConfs 2 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Root for objects in the software MIB
|
|
-- ----------------------------------------------------
|
|
|
|
lumSoftwareMIBObjects OBJECT IDENTIFIER ::= { lumSoftwareMIB 2 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- This MIB contains the following groups:
|
|
-- ----------------------------------------------------
|
|
|
|
softwareGeneral OBJECT IDENTIFIER ::= { lumSoftwareMIBObjects 1 }
|
|
softwareVersionList OBJECT IDENTIFIER ::= { lumSoftwareMIBObjects 2 }
|
|
softwareCommand OBJECT IDENTIFIER ::= { lumSoftwareMIBObjects 3 }
|
|
softwareLogList OBJECT IDENTIFIER ::= { lumSoftwareMIBObjects 4 }
|
|
lumentisSoftwareNotifications OBJECT IDENTIFIER ::= { lumSoftwareMIBObjects 5 }
|
|
softwareSpare OBJECT IDENTIFIER ::= { lumSoftwareMIBObjects 6 }
|
|
softwareExpectedSwList OBJECT IDENTIFIER ::= { lumSoftwareMIBObjects 7 }
|
|
softwareCuRep OBJECT IDENTIFIER ::= { lumSoftwareMIBObjects 8 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Textual Conventions
|
|
-- ----------------------------------------------------
|
|
|
|
-- n/a
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- General group
|
|
-- ----------------------------------------------------
|
|
|
|
softwareGeneralLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the log table was last
|
|
changed.
|
|
|
|
"
|
|
::= { softwareGeneral 1 }
|
|
|
|
softwareGeneralConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the following data
|
|
was last changed:
|
|
- command
|
|
- version
|
|
- expected
|
|
"
|
|
::= { softwareGeneral 2 }
|
|
|
|
softwareGeneralSoftwareVersionTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of table
|
|
|
|
"
|
|
::= { softwareGeneral 3 }
|
|
|
|
softwareGeneralSoftwareLogTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of table
|
|
|
|
"
|
|
::= { softwareGeneral 4 }
|
|
|
|
softwareGeneralSoftwareExpectedSwTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of table
|
|
|
|
"
|
|
::= { softwareGeneral 5 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Command group
|
|
-- ----------------------------------------------------
|
|
|
|
softwareCommandServerIp OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the host to retrieve the file from.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { softwareCommand 1 }
|
|
|
|
softwareCommandEnmFile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Full path to the ENM-spec to use.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { softwareCommand 2 }
|
|
|
|
softwareCommandIncludeFs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true (1),
|
|
false (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shall the file system be included in the operation?
|
|
|
|
"
|
|
DEFVAL { false }
|
|
::= { softwareCommand 3 }
|
|
|
|
softwareCommandCleanFirst OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noClean (1),
|
|
normalClean (2),
|
|
culessClean (3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shall the file system be 'cleaned' before the operation?
|
|
|
|
noClean - do not clean
|
|
normalClean - equivalent to 'swu clean all all'
|
|
culessClean - this will also remove the previous
|
|
version of appl.
|
|
|
|
"
|
|
DEFVAL { normalClean }
|
|
::= { softwareCommand 4 }
|
|
|
|
softwareCommandForce OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true (1),
|
|
false (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ignore minor failures.
|
|
|
|
"
|
|
DEFVAL { false }
|
|
::= { softwareCommand 5 }
|
|
|
|
softwareCommandOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
test (1),
|
|
check (2),
|
|
install (3),
|
|
upgrade (4),
|
|
rebootAfter (5),
|
|
rebootCu (6),
|
|
rebootAll (7),
|
|
revert (8),
|
|
abort (9),
|
|
unlock (10),
|
|
clean (11),
|
|
forcedUnlock (12),
|
|
rebootAllCold (13),
|
|
rebootExpr (14),
|
|
rebootCold (15),
|
|
rebootPendingBoards (16)}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operation to perform.
|
|
|
|
test - A no operation - test semaphore.
|
|
Optional use.
|
|
|
|
check - do not install anything, just show what needs
|
|
to be done.
|
|
|
|
install - install but do not activate.
|
|
|
|
upgrade - install and activate
|
|
|
|
rebootAfter - install, activate and reboot.
|
|
This should not be used by SNMP.
|
|
|
|
rebootCu - reboot the main CU.
|
|
|
|
rebootAll - reboot all boards.
|
|
|
|
revert - 'Undo' an upgrade operation and set the
|
|
'next' to be the same as 'executing'.
|
|
This has to be done before reboot.
|
|
Revert does not work if the file system has
|
|
been upgraded.
|
|
|
|
abort - release the transaction.
|
|
|
|
unlock - release the transaction.
|
|
|
|
clean - prepare space by cleaning (FTP)
|
|
|
|
forcedUnlock - node internal operation.
|
|
Release transaction without passwd.
|
|
|
|
rebootAllCode - reboot all Cold.
|
|
|
|
rebootExpr - reboot card(s) specified by the subrack slot expr.
|
|
|
|
rebootCold - cold reboot of card(s) specified by the subrack slot expr.
|
|
|
|
rebootPendingBoards - Only boards that have activated new software are rebooted.
|
|
If the activated software is already running,
|
|
the board is not rebooted.
|
|
|
|
"
|
|
DEFVAL { test }
|
|
::= { softwareCommand 6 }
|
|
|
|
softwareCommandOperationTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Delay (in seconds) until the operation is started.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { softwareCommand 7 }
|
|
|
|
softwareCommandTestAndIncr OBJECT-TYPE
|
|
SYNTAX TestAndIncr
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Protection against simultaneous access from
|
|
multiple managers. See SNMPv2-TC.
|
|
|
|
Setting this variable implies that a transaction
|
|
starts. The provided newPasswd will be secret passwd
|
|
of the transaction.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { softwareCommand 8 }
|
|
|
|
softwareCommandSemaphore OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
open (1),
|
|
locked (2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary state of the SWU-server
|
|
|
|
NOTE that this variable will change state without
|
|
affecting the lastChange time stamp.
|
|
|
|
Test this variable before starting a transaction.
|
|
|
|
open - no transaction is started
|
|
|
|
locked - transaction is started
|
|
|
|
"
|
|
::= { softwareCommand 9 }
|
|
|
|
softwareCommandOperationState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle (1),
|
|
pending(2),
|
|
cleaning (3),
|
|
checking (4),
|
|
downloading (5),
|
|
installing (6),
|
|
preparing (7),
|
|
activating (8),
|
|
installingFs(9),
|
|
reverting (10),
|
|
rebooting (11) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State to show the progress of the operation.
|
|
|
|
idle - when no operation is in progress.
|
|
|
|
pending - operation is ordered but will start later
|
|
|
|
cleaning - cleaning all boards.
|
|
|
|
checking - checking which SW packages that need to be
|
|
downloaded.
|
|
|
|
downloading - downloading SW packages from server.
|
|
|
|
installing - distributing and unpacking packages within
|
|
the node.
|
|
|
|
preparing - performing a test activate
|
|
|
|
activating - activating all SW packages.
|
|
|
|
installingFs - distributing and unpacking filesystem.
|
|
|
|
reverting - reverting to executing
|
|
|
|
rebooting - ordering reboot to all nodes.
|
|
|
|
"
|
|
::= { softwareCommand 10 }
|
|
|
|
softwareCommandProgressMax OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Show the maximum value of the progressCounter
|
|
|
|
"
|
|
::= { softwareCommand 11 }
|
|
|
|
softwareCommandResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
success (2),
|
|
failed (3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The result of the operation
|
|
|
|
none - no result
|
|
|
|
success - the latest operation was successful.
|
|
|
|
failed - the latest operation failed.
|
|
|
|
"
|
|
::= { softwareCommand 12 }
|
|
|
|
softwareCommandEnmState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
upToDate (2),
|
|
rebootNeeded (3),
|
|
activateNeeded (4),
|
|
upgradeNeeded (5),
|
|
done (6),
|
|
filesNeeded (7),
|
|
upgradeWithoutRebootNeeded (8),
|
|
removeBoardNeeded (9) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
Only applicable if result != none.
|
|
|
|
none - no state
|
|
|
|
upToDate - no upgrade needed
|
|
|
|
rebootNeeded - all software is activated, but reboot of
|
|
some boards are required
|
|
|
|
activateNeeded - all software is installed, but activation of
|
|
new software required
|
|
|
|
upgradeNeeded - installation of new software required
|
|
|
|
done - the new software is installed and activated,
|
|
and, the updated board are rebooted.
|
|
|
|
filesNeeded - Software for all boards currently installed
|
|
in the node is up to date. filesNeeded
|
|
indicates that a software download might be
|
|
needed for a board that is added or
|
|
replaced.
|
|
|
|
upgradeWithoutRebootNeeded - This state shows that the node already runs on
|
|
on the software stated in enm-spec. To update
|
|
the enm-spec although, an upgrade without reboot
|
|
is needed.
|
|
|
|
removeBoardNeeded - This state shows that the node contains a board
|
|
that is too old to upgrade. The board must be
|
|
removed.
|
|
"
|
|
::= { softwareCommand 13 }
|
|
|
|
softwareCommandErrorCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the number of minor erros encountered.
|
|
|
|
"
|
|
::= { softwareCommand 14 }
|
|
|
|
softwareCommandProgressCounter OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the progress of the ongoing
|
|
ENM upgrade.
|
|
|
|
"
|
|
::= { softwareCommand 15 }
|
|
|
|
softwareCommandNewPassword OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a secret, write-only, parameter.
|
|
|
|
This is set in the same multi-set as testAndIncr
|
|
and will be used as the client password to the
|
|
transaction.
|
|
|
|
It must be supplied in all operations in
|
|
'passwd'.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { softwareCommand 16 }
|
|
|
|
softwareCommandPassword OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a secret, write-only, parameter.
|
|
|
|
This parameter will trigger the operation.
|
|
|
|
Use the same value as set in newPasswd.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { softwareCommand 17 }
|
|
|
|
softwareCommandReleaseAfterOperation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true (1),
|
|
false (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Release lock after operation.
|
|
|
|
"
|
|
DEFVAL { false }
|
|
::= { softwareCommand 18 }
|
|
|
|
softwareCommandSendTraps OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true (1),
|
|
false (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set this to indicate whether you want traps or not.
|
|
|
|
"
|
|
DEFVAL { false }
|
|
::= { softwareCommand 19 }
|
|
|
|
softwareCommandClientOperationId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967295)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is set by the SNMP client
|
|
for each operation. The value is
|
|
sent back in the traps generated
|
|
by the operation.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { softwareCommand 20 }
|
|
|
|
softwareCommandTftpTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..20000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter stipulates the timeout
|
|
used by TFTP when downloading from
|
|
the network.
|
|
|
|
Normally, you do not have to use this!
|
|
|
|
If the circumstances are extreme, you
|
|
might have to set the timeout.
|
|
|
|
0 = use predefined defaults.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { softwareCommand 21 }
|
|
|
|
softwareCommandLocalFtpDirectory OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Full path to the directory where files
|
|
should be FTPd from TNM.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { softwareCommand 22 }
|
|
|
|
softwareCommandWarningCount OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Shows the number of warnings encountered.
|
|
|
|
"
|
|
::= { softwareCommand 23 }
|
|
|
|
softwareCommandEnmRelease OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current ENM release.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { softwareCommand 24 }
|
|
|
|
|
|
softwareCommandSubrackSlotExpr OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subrack and slot expression to perform action on
|
|
|
|
If value is empty, 'all' is assumed.
|
|
|
|
Expression follows mibsh swu command, accepting '<subrack> <slot>'
|
|
or '<subrack>.<slots>' where <slots> is '<slot>' or
|
|
'<slot>,<slot> | <slot>-<slot> | *'
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { softwareCommand 25 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Software versions list
|
|
-- ----------------------------------------------------
|
|
|
|
softwareVersionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SoftwareVersionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of software versions."
|
|
::= { softwareVersionList 1 }
|
|
|
|
softwareVersionEntry OBJECT-TYPE
|
|
SYNTAX SoftwareVersionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the software version list.
|
|
|
|
"
|
|
INDEX { softwareVersionIndex }
|
|
::= { softwareVersionTable 1 }
|
|
|
|
SoftwareVersionEntry ::=
|
|
SEQUENCE {
|
|
softwareVersionIndex Unsigned32,
|
|
softwareVersionName DisplayString,
|
|
softwareVersionSubrack Unsigned32,
|
|
softwareVersionSlot Unsigned32,
|
|
softwareVersionCategory INTEGER,
|
|
softwareVersionVersion DisplayString,
|
|
softwareVersionStatus Unsigned32 }
|
|
|
|
softwareVersionIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary index assigned to each
|
|
software version entry.
|
|
|
|
"
|
|
::= { softwareVersionEntry 1 }
|
|
|
|
softwareVersionName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the version entry.
|
|
|
|
"
|
|
::= { softwareVersionEntry 2 }
|
|
|
|
softwareVersionSubrack OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subrack for this version
|
|
|
|
"
|
|
::= { softwareVersionEntry 3 }
|
|
|
|
softwareVersionSlot OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot for this version
|
|
|
|
"
|
|
::= { softwareVersionEntry 4 }
|
|
|
|
softwareVersionCategory OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
boot (0),
|
|
kernel (1),
|
|
appl (2),
|
|
fs (3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The category for this version
|
|
|
|
"
|
|
::= { softwareVersionEntry 5 }
|
|
|
|
|
|
softwareVersionVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version.
|
|
|
|
"
|
|
::= { softwareVersionEntry 6 }
|
|
|
|
softwareVersionStatus OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this version
|
|
|
|
A bit mask
|
|
Bit 0 (lowest) = 1 => isExecuting
|
|
Bit 1 = 1 => isPrevious
|
|
Bit 2 = 1 => isCurrent (not used)
|
|
Bit 3 = 1 => isNext
|
|
Bit 4 = 1 => isIncomplete (not used)
|
|
Bit 5 = 1 => isOnlyVirtual
|
|
Bit 6 = 1 => isExpected
|
|
|
|
"
|
|
::= { softwareVersionEntry 7 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Software log list
|
|
-- ----------------------------------------------------
|
|
softwareLogTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SoftwareLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of software command log entries."
|
|
::= { softwareLogList 1 }
|
|
|
|
softwareLogEntry OBJECT-TYPE
|
|
SYNTAX SoftwareLogEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the command log list.
|
|
|
|
"
|
|
INDEX { softwareLogIndex }
|
|
::= { softwareLogTable 1 }
|
|
|
|
SoftwareLogEntry ::=
|
|
SEQUENCE {
|
|
softwareLogIndex Unsigned32,
|
|
softwareLogName DisplayString,
|
|
softwareLogTransaction Unsigned32,
|
|
softwareLogString DisplayString }
|
|
|
|
softwareLogIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary index assigned to each
|
|
log entry.
|
|
|
|
"
|
|
::= { softwareLogEntry 1 }
|
|
|
|
softwareLogName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the log entry.
|
|
|
|
"
|
|
::= { softwareLogEntry 2 }
|
|
|
|
softwareLogTransaction OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the transaction generating the
|
|
log entry.
|
|
|
|
"
|
|
::= { softwareLogEntry 3 }
|
|
|
|
softwareLogString OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual log string
|
|
|
|
"
|
|
::= { softwareLogEntry 4 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- SparePart group
|
|
-- ----------------------------------------------------
|
|
|
|
softwareSpareBoardAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the node.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { softwareSpare 1 }
|
|
|
|
softwareSpareBoardMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The net mask of the node.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { softwareSpare 2 }
|
|
|
|
softwareSpareMasterAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the CU.
|
|
|
|
"
|
|
DEFVAL { "" }
|
|
::= { softwareSpare 3 }
|
|
|
|
softwareSpareMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undef (0),
|
|
tu (1),
|
|
standalone (2),
|
|
slave (3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates how the spare part shall be configured.
|
|
|
|
tu - normal TU
|
|
|
|
standalone - boardAddress/mask will be set
|
|
together with standalone attribute
|
|
|
|
slave - boardAddress/mask will be set
|
|
together with standalone attribute and
|
|
masterAddress.
|
|
|
|
"
|
|
DEFVAL { undef }
|
|
::= { softwareSpare 4 }
|
|
|
|
softwareSpareBackupServer OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the server storing backups.
|
|
|
|
"
|
|
::= { softwareSpare 5 }
|
|
|
|
softwareSpareBackupFile OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Full path to the backup file on remote server.
|
|
|
|
"
|
|
::= { softwareSpare 6 }
|
|
|
|
softwareSpareState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
undef (0),
|
|
waiting (1),
|
|
contactingCu (2),
|
|
installBoot (3),
|
|
installKernel (4),
|
|
installAppl (5),
|
|
installFs (6),
|
|
activating (7),
|
|
clearSparepart (8),
|
|
done (9),
|
|
publicAddress (10) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"State of the spare part.
|
|
|
|
waiting - trying to find CU
|
|
installBoot - in progress of installing the boot
|
|
installKernel - in progress of installing the kernel
|
|
installAppl - in progress of installing the application
|
|
installFs - in progress of installing the file system
|
|
activating - install ready => activate
|
|
clearSparepart - clear flash parameter
|
|
done - about to reboot
|
|
publicAddress - changed to public address
|
|
"
|
|
::= { softwareSpare 7 }
|
|
|
|
softwareSpareResult OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
ok (2),
|
|
cuNotFound (3),
|
|
autoUpgradeNotSupported (4),
|
|
bootNotFound (5),
|
|
kernelNotFound (6),
|
|
applNotFound (7),
|
|
fsNotFound (8),
|
|
bootActivateFailed (9),
|
|
kernelActivateFailed (10),
|
|
applActivateFailed (11),
|
|
flashUpdateFailed (12) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Result of the spare part operation
|
|
|
|
"
|
|
::= { softwareSpare 8 }
|
|
|
|
softwareSpareCommentString OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Display comment about the state.
|
|
|
|
"
|
|
::= { softwareSpare 9 }
|
|
|
|
softwareSpareConfigure OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure a spare part.
|
|
Run automatically when in spare part mode.
|
|
Asks for the following:
|
|
|
|
mode
|
|
|
|
boardAddress - if mode is 'standalone'
|
|
or 'slave'
|
|
|
|
mask - if mode is 'standalone'
|
|
or 'slave'
|
|
|
|
masterAddress - if mode is 'slave'
|
|
|
|
"
|
|
::= { softwareSpare 10 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Expected Software list
|
|
-- ----------------------------------------------------
|
|
|
|
softwareExpectedSwTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SoftwareExpectedSwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of software versions."
|
|
::= { softwareExpectedSwList 1 }
|
|
|
|
softwareExpectedSwEntry OBJECT-TYPE
|
|
SYNTAX SoftwareExpectedSwEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the software version list.
|
|
|
|
"
|
|
INDEX { softwareExpectedSwIndex }
|
|
::= { softwareExpectedSwTable 1 }
|
|
|
|
SoftwareExpectedSwEntry ::=
|
|
SEQUENCE {
|
|
softwareExpectedSwIndex Unsigned32,
|
|
softwareExpectedSwName DisplayString,
|
|
softwareExpectedSwCategory INTEGER,
|
|
softwareExpectedSwBoardType INTEGER,
|
|
softwareExpectedSwFileName DisplayString,
|
|
softwareExpectedSwPresent INTEGER }
|
|
|
|
softwareExpectedSwIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An arbitrary index assigned to each
|
|
expected software entry.
|
|
|
|
"
|
|
::= { softwareExpectedSwEntry 1 }
|
|
|
|
softwareExpectedSwName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the expected sw entry.
|
|
|
|
"
|
|
::= { softwareExpectedSwEntry 2 }
|
|
|
|
softwareExpectedSwCategory OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
boot (0),
|
|
kernel (1),
|
|
appl (2),
|
|
fs (3) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The category for this version
|
|
|
|
"
|
|
::= { softwareExpectedSwEntry 3 }
|
|
|
|
softwareExpectedSwBoardType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cu (0),
|
|
tu (1),
|
|
all (2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The board type that this applies to.
|
|
|
|
"
|
|
::= { softwareExpectedSwEntry 4 }
|
|
|
|
softwareExpectedSwFileName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the expected sw entry.
|
|
|
|
"
|
|
::= { softwareExpectedSwEntry 5 }
|
|
|
|
softwareExpectedSwPresent OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
yes (1),
|
|
no (2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the file already is present in the node.
|
|
|
|
"
|
|
::= { softwareExpectedSwEntry 6 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- CUReplacement group
|
|
-- ----------------------------------------------------
|
|
|
|
softwareCuRepAdminStatus OBJECT-TYPE
|
|
SYNTAX BoardOrInterfaceAdminStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state for the alarm.
|
|
|
|
down - No alarm will be rasied if SW packages are missing.
|
|
|
|
service - No alarm will be rasied if SW packages are missing.
|
|
|
|
up - Alarms are not suppressed.
|
|
|
|
"
|
|
DEFVAL { up }
|
|
::= { softwareCuRep 1 }
|
|
|
|
softwareCuRepUnSaved OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true (1),
|
|
false (2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the configuration is saved or not.
|
|
|
|
"
|
|
DEFVAL { false }
|
|
::= { softwareCuRep 2 }
|
|
|
|
softwareCuRepSystemMode OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If dipswitch is changed or not.
|
|
|
|
"
|
|
DEFVAL { 1 }
|
|
::= { softwareCuRep 3 }
|
|
|
|
softwareCuRepRebootCu OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true (1),
|
|
false (2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the CU should be rebooted or not.
|
|
|
|
"
|
|
DEFVAL { false }
|
|
::= { softwareCuRep 4 }
|
|
|
|
softwareCuRepOkConfigure OBJECT-TYPE
|
|
SYNTAX CommandString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Configure an CU that has correct SW.
|
|
Run automatically when in CU replacement mode
|
|
when CU is an CU-SFP AND SW is correct.
|
|
Asks for the following:
|
|
|
|
Configuration not saved. Do you want to continue anyway? (yes/no)
|
|
|
|
Dipswitch is not changed. Do you want to continue anyaway? (yes/no)
|
|
|
|
To fulfill CU-replacement, the main CU must be rebooted. Continue
|
|
with reboot? (yes/no)
|
|
|
|
"
|
|
::= { softwareCuRep 5 }
|
|
|
|
softwareCuRepSwPackagesMissing OBJECT-TYPE
|
|
SYNTAX FaultStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Software package file(s) are missing on master CU.
|
|
|
|
When replacing or introducing CU or TU units some software
|
|
packages needs to be downloaded to the master CU in order to
|
|
automatically upgrade the software running on the replacement
|
|
unit.
|
|
|
|
Please perform an upgrade (or download) to current
|
|
enm-release spec file (without rebooting). The alarm should
|
|
then be cleared within 5 minutes.
|
|
Note that when this alarm is cleared, the alarm 'SW not
|
|
distributed' might be seen in up to approximately 5 minutes
|
|
before the system has assured that CU SW packages are
|
|
transferred to TU units.
|
|
|
|
"
|
|
::= { softwareCuRep 6 }
|
|
|
|
softwareCuRepSwNotDistributed OBJECT-TYPE
|
|
SYNTAX FaultStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Some SW package(s) needed to perform a CU replacement with
|
|
automatic upgrade are not transferred to a traffic unit. This
|
|
means that CU replacement with auto-upgrade will not work on
|
|
this node.
|
|
|
|
Note that this alarm might be seen in up to approximately 5
|
|
minutes after a 'SW not downloaded' alarm is cleared to inform
|
|
that SW packages are not yet distributed.
|
|
|
|
Possible reasons:
|
|
1. If parts of the master CU software were updated without an
|
|
enm-spec file there might be a mismatch between executing
|
|
and expected software resulting in this alarm. If so
|
|
perform a full upgrade to preferred enm-spec version.
|
|
2. More than one traffic unit might be needed to distribute
|
|
software, insert another traffic unit into the node main
|
|
subrack or if running CU-SFP as master CU, reconfigure the
|
|
'Supported replacement CUs' attribute to the control unit
|
|
type(s) appropriate for your system.
|
|
|
|
"
|
|
::= { softwareCuRep 7 }
|
|
|
|
|
|
softwareCuRepSupportedReplacements OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
all (1),
|
|
cuSfp (2),
|
|
cuSfpii (3),
|
|
cuSfpiii (4) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The types of control unit boards which should be supported as
|
|
replacements for the current main control unit.
|
|
|
|
The system will transfer the software packages for the board
|
|
types configured by this attribute to the traffic units. These
|
|
software packages will be used for automatic upgrade during CU
|
|
replacement.
|
|
|
|
If some SW packages needed by the control unit types
|
|
configured by this attribute cannot be distributed to a
|
|
traffic unit, alarms will be raised according to the cause:
|
|
|
|
a) Some software package(s) has not been downloaded:
|
|
a 'Replacement CU SW not downloaded' alarm will be raised.
|
|
|
|
b) Some software package(s) could not be distributed, e.g. due to
|
|
lack of free space on the traffic units:
|
|
a 'Replacement CU SW not distributed' alarm will be raised.
|
|
|
|
Allowed values:
|
|
|
|
all All compatible CU replacements supported
|
|
|
|
cuSfp Only replacement with a CU-SFP supported
|
|
|
|
cuSfpii Only replacement with a CU-SFP/II supported
|
|
|
|
cuSfpiii Only replacement with a CU-SFP/III supported
|
|
|
|
NOTE: Automatic upgrade is NEVER performed if the current
|
|
control unit or the replacement control unit is of type CU or
|
|
CU-OSC.
|
|
|
|
"
|
|
DEFVAL { all }
|
|
::= { softwareCuRep 8 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Notifications
|
|
-- ----------------------------------------------------
|
|
softwareNotifyPrefix OBJECT IDENTIFIER ::= { lumentisSoftwareNotifications 0 }
|
|
|
|
softwareResultTrap NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
softwareCommandOperationState,
|
|
softwareCommandProgressMax,
|
|
softwareCommandResult,
|
|
softwareCommandEnmState,
|
|
softwareCommandErrorCount,
|
|
softwareCommandProgressCounter,
|
|
softwareCommandNewPassword,
|
|
softwareCommandClientOperationId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Sent when the software upgrade
|
|
operation changes state.
|
|
|
|
"
|
|
::= { softwareNotifyPrefix 1 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Object and event groups
|
|
-- ----------------------------------------------------
|
|
|
|
softwareGeneralGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareGeneralLastChangeTime,
|
|
softwareGeneralConfigLastChangeTime }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The software general objects."
|
|
::= { lumSoftwareGroups 1 }
|
|
|
|
softwareVersionGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareVersionIndex,
|
|
softwareVersionName,
|
|
softwareVersionSubrack,
|
|
softwareVersionSlot,
|
|
softwareVersionCategory,
|
|
softwareVersionVersion,
|
|
softwareVersionStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software version objects."
|
|
::= { lumSoftwareGroups 2 }
|
|
|
|
softwareCommandGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareCommandServerIp,
|
|
softwareCommandEnmFile,
|
|
softwareCommandIncludeFs,
|
|
softwareCommandCleanFirst,
|
|
softwareCommandForce,
|
|
softwareCommandOperation,
|
|
softwareCommandOperationTimeout,
|
|
softwareCommandTestAndIncr,
|
|
softwareCommandSemaphore,
|
|
softwareCommandOperationState,
|
|
softwareCommandProgressCounter,
|
|
softwareCommandResult,
|
|
softwareCommandEnmState,
|
|
softwareCommandErrorCount }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The software command objects."
|
|
::= { lumSoftwareGroups 3 }
|
|
|
|
softwareLogGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareLogIndex,
|
|
softwareLogName,
|
|
softwareLogTransaction,
|
|
softwareLogString }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software log objects."
|
|
::= { lumSoftwareGroups 4 }
|
|
|
|
softwareCommandGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareCommandServerIp,
|
|
softwareCommandEnmFile,
|
|
softwareCommandIncludeFs,
|
|
softwareCommandCleanFirst,
|
|
softwareCommandForce,
|
|
softwareCommandOperation,
|
|
softwareCommandOperationTimeout,
|
|
softwareCommandTestAndIncr,
|
|
softwareCommandSemaphore,
|
|
softwareCommandOperationState,
|
|
softwareCommandProgressMax,
|
|
softwareCommandResult,
|
|
softwareCommandEnmState,
|
|
softwareCommandErrorCount,
|
|
softwareCommandProgressCounter,
|
|
softwareCommandNewPassword,
|
|
softwareCommandPassword,
|
|
softwareCommandReleaseAfterOperation,
|
|
softwareCommandSendTraps,
|
|
softwareCommandClientOperationId,
|
|
softwareCommandTftpTimeout }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The software command objects (3.1)."
|
|
::= { lumSoftwareGroups 5 }
|
|
|
|
softwareSpareGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareSpareBoardAddr,
|
|
softwareSpareBoardMask,
|
|
softwareSpareMasterAddr,
|
|
softwareSpareMode,
|
|
softwareSpareBackupServer,
|
|
softwareSpareBackupFile,
|
|
softwareSpareState,
|
|
softwareSpareResult,
|
|
softwareSpareCommentString,
|
|
softwareSpareConfigure }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The spare part objects."
|
|
::= { lumSoftwareGroups 6 }
|
|
|
|
softwareGeneralGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareGeneralLastChangeTime,
|
|
softwareGeneralConfigLastChangeTime,
|
|
softwareGeneralSoftwareVersionTableSize,
|
|
softwareGeneralSoftwareLogTableSize }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The software general objects."
|
|
::= { lumSoftwareGroups 7 }
|
|
|
|
softwareGeneralGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareGeneralLastChangeTime,
|
|
softwareGeneralConfigLastChangeTime,
|
|
softwareGeneralSoftwareVersionTableSize,
|
|
softwareGeneralSoftwareLogTableSize,
|
|
softwareGeneralSoftwareExpectedSwTableSize }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software general objects. (5.0)"
|
|
::= { lumSoftwareGroups 8 }
|
|
|
|
softwareCommandGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareCommandServerIp,
|
|
softwareCommandEnmFile,
|
|
softwareCommandIncludeFs,
|
|
softwareCommandCleanFirst,
|
|
softwareCommandForce,
|
|
softwareCommandOperation,
|
|
softwareCommandOperationTimeout,
|
|
softwareCommandTestAndIncr,
|
|
softwareCommandSemaphore,
|
|
softwareCommandOperationState,
|
|
softwareCommandProgressMax,
|
|
softwareCommandResult,
|
|
softwareCommandEnmState,
|
|
softwareCommandErrorCount,
|
|
softwareCommandProgressCounter,
|
|
softwareCommandNewPassword,
|
|
softwareCommandPassword,
|
|
softwareCommandReleaseAfterOperation,
|
|
softwareCommandSendTraps,
|
|
softwareCommandClientOperationId,
|
|
softwareCommandTftpTimeout,
|
|
softwareCommandLocalFtpDirectory,
|
|
softwareCommandWarningCount,
|
|
softwareCommandEnmRelease }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The software command objects (5.0)."
|
|
::= { lumSoftwareGroups 9 }
|
|
|
|
softwareExpectedSwGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareExpectedSwIndex,
|
|
softwareExpectedSwName,
|
|
softwareExpectedSwCategory,
|
|
softwareExpectedSwBoardType,
|
|
softwareExpectedSwFileName
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The expected software objects (5.0)."
|
|
::= { lumSoftwareGroups 10 }
|
|
|
|
softwareExpectedSwGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareExpectedSwIndex,
|
|
softwareExpectedSwName,
|
|
softwareExpectedSwCategory,
|
|
softwareExpectedSwBoardType,
|
|
softwareExpectedSwFileName,
|
|
softwareExpectedSwPresent
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expected software objects (11.0)."
|
|
::= { lumSoftwareGroups 11 }
|
|
|
|
softwareCuRepGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareCuRepAdminStatus,
|
|
softwareCuRepUnSaved,
|
|
softwareCuRepSystemMode,
|
|
softwareCuRepRebootCu,
|
|
softwareCuRepOkConfigure,
|
|
softwareCuRepSwPackagesMissing
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The cu replacement software objects (13.0)."
|
|
::= { lumSoftwareGroups 12 }
|
|
|
|
softwareCuRepGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareCuRepAdminStatus,
|
|
softwareCuRepUnSaved,
|
|
softwareCuRepSystemMode,
|
|
softwareCuRepRebootCu,
|
|
softwareCuRepOkConfigure,
|
|
softwareCuRepSwPackagesMissing,
|
|
softwareCuRepSwNotDistributed,
|
|
softwareCuRepSupportedReplacements
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cu replacement software objects (18.0)."
|
|
::= { lumSoftwareGroups 13 }
|
|
|
|
softwareCommandGroupV4 OBJECT-GROUP
|
|
OBJECTS {
|
|
softwareCommandServerIp,
|
|
softwareCommandEnmFile,
|
|
softwareCommandIncludeFs,
|
|
softwareCommandCleanFirst,
|
|
softwareCommandForce,
|
|
softwareCommandOperation,
|
|
softwareCommandOperationTimeout,
|
|
softwareCommandTestAndIncr,
|
|
softwareCommandSemaphore,
|
|
softwareCommandOperationState,
|
|
softwareCommandProgressMax,
|
|
softwareCommandResult,
|
|
softwareCommandEnmState,
|
|
softwareCommandErrorCount,
|
|
softwareCommandProgressCounter,
|
|
softwareCommandNewPassword,
|
|
softwareCommandPassword,
|
|
softwareCommandReleaseAfterOperation,
|
|
softwareCommandSendTraps,
|
|
softwareCommandClientOperationId,
|
|
softwareCommandTftpTimeout,
|
|
softwareCommandLocalFtpDirectory,
|
|
softwareCommandWarningCount,
|
|
softwareCommandEnmRelease,
|
|
softwareCommandSubrackSlotExpr}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software command objects (30.0)."
|
|
::= { lumSoftwareGroups 14 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Compliance
|
|
-- ----------------------------------------------------
|
|
|
|
lumSoftwareBasicComplV1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the software MIB v1 (3.0)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
softwareGeneralGroup,
|
|
softwareVersionGroup,
|
|
softwareCommandGroup,
|
|
softwareLogGroup }
|
|
::= { lumSoftwareCompl 1 }
|
|
|
|
lumSoftwareBasicComplV2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the software MIB v2 (3.1)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
softwareGeneralGroupV2,
|
|
softwareVersionGroup,
|
|
softwareCommandGroupV2,
|
|
softwareLogGroup,
|
|
softwareSpareGroup }
|
|
::= { lumSoftwareCompl 2 }
|
|
|
|
lumSoftwareBasicComplV3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the software MIB v3 (5.0)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
softwareGeneralGroupV3,
|
|
softwareVersionGroup,
|
|
softwareCommandGroupV3,
|
|
softwareLogGroup,
|
|
softwareSpareGroup,
|
|
softwareExpectedSwGroup }
|
|
::= { lumSoftwareCompl 3 }
|
|
|
|
lumSoftwareBasicComplV4 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the software MIB v3 (11.0)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
softwareGeneralGroupV3,
|
|
softwareVersionGroup,
|
|
softwareCommandGroupV3,
|
|
softwareLogGroup,
|
|
softwareSpareGroup,
|
|
softwareExpectedSwGroupV2 }
|
|
::= { lumSoftwareCompl 4 }
|
|
|
|
lumSoftwareBasicComplV5 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the software MIB v3 (13.0)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
softwareGeneralGroupV3,
|
|
softwareVersionGroup,
|
|
softwareCommandGroupV3,
|
|
softwareLogGroup,
|
|
softwareSpareGroup,
|
|
softwareExpectedSwGroupV2,
|
|
softwareCuRepGroup }
|
|
::= { lumSoftwareCompl 5 }
|
|
|
|
lumSoftwareBasicComplV6 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the software MIB v6 (18.0)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
softwareGeneralGroupV3,
|
|
softwareVersionGroup,
|
|
softwareCommandGroupV3,
|
|
softwareLogGroup,
|
|
softwareSpareGroup,
|
|
softwareExpectedSwGroupV2,
|
|
softwareCuRepGroupV2 }
|
|
::= { lumSoftwareCompl 6 }
|
|
|
|
lumSoftwareBasicComplV7 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the software MIB v7 (30.0)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
softwareGeneralGroupV3,
|
|
softwareVersionGroup,
|
|
softwareCommandGroupV4,
|
|
softwareLogGroup,
|
|
softwareSpareGroup,
|
|
softwareExpectedSwGroupV2,
|
|
softwareCuRepGroupV2 }
|
|
::= { lumSoftwareCompl 7 }
|
|
|
|
|
|
lumSoftwareBasicComplV8 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the software MIB v8 (30.1)."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
softwareGeneralGroupV3,
|
|
softwareVersionGroup,
|
|
softwareCommandGroupV4,
|
|
softwareLogGroup,
|
|
softwareSpareGroup,
|
|
softwareExpectedSwGroupV2,
|
|
softwareCuRepGroupV2 }
|
|
::= { lumSoftwareCompl 8 }
|
|
|
|
END
|
|
|