2478 lines
75 KiB
Plaintext
2478 lines
75 KiB
Plaintext
LUM-IFOPTICAL-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
OBJECT-GROUP, MODULE-COMPLIANCE
|
|
FROM SNMPv2-CONF
|
|
DateAndTime
|
|
FROM SNMPv2-TC
|
|
lumModules, lumIfOpticalMIB
|
|
FROM LUM-REG
|
|
Unsigned32WithNA, ResetWithNA, SignalStatusWithNA, FaultStatusWithNA, FaultStatus,
|
|
EnabledDisabledWithNA, Signed32WithNA, LaserMode, OnOff, Frequency,
|
|
MgmtNameString, FrequencyOnlyNotApplicable, FecType, BerLevelMTOSI,
|
|
LaneFrequency, DispersionSearchLimit
|
|
FROM LUM-TC;
|
|
|
|
lumIfOpticalMIBModule MODULE-IDENTITY
|
|
LAST-UPDATED
|
|
"201708300000Z" -- August 30th 2017
|
|
ORGANIZATION
|
|
"Infinera Corporation"
|
|
CONTACT-INFO
|
|
"techsupport@infinera.com"
|
|
DESCRIPTION
|
|
"The MIB module for management of optical parameters on port objects.
|
|
|
|
This module describes the physical and channel layer in ITU-T
|
|
Recommendation
|
|
G.709.
|
|
|
|
The tables contained in this MIB are:
|
|
|
|
(1) The General group contains some general attributes as time stamps
|
|
and tables sizes.
|
|
|
|
(2) The opticalTransmission (ots) group contains information and
|
|
configuration for the Ots (optical transmission section)
|
|
layer objects.
|
|
|
|
(3) The opticalChannel (och) group contains information and
|
|
configuration for the Och (optical channel) layer
|
|
objects.
|
|
|
|
(4) The digital signal rate (dsr) group contains information and
|
|
configuration for the Dsr (digital signal rate) layer
|
|
objects.
|
|
|
|
(5) The opticalTransportLaneCarrier (otlc) group contains information and
|
|
configuration for the Otlc (optical transport lane carrier)
|
|
layer objects.
|
|
|
|
(6) The opticalTransportLaneCarrierGroup (otlcg) group contains
|
|
information and configuration for the Otlcg (optical transport lane
|
|
carrier group) layer objects.
|
|
|
|
"
|
|
REVISION
|
|
"201708300000Z" -- August 30th 2017
|
|
DESCRIPTION
|
|
"Changes made for release r29.1:
|
|
- Added line coding attribute"
|
|
REVISION
|
|
"201706150000Z" -- June 15th 2017
|
|
DESCRIPTION
|
|
"Changes made for release r29.0:
|
|
- Changed ORGANIZATION and CONTACT-INFO"
|
|
REVISION
|
|
"201704170000Z" -- April 17th 2017
|
|
DESCRIPTION
|
|
"Changes made for release r28.1:
|
|
- Added lineOch LaserNotTuned.
|
|
- Added lineOts LaserForcedOn.
|
|
- Added fecDecModeMismatch alarm."
|
|
REVISION
|
|
"201611300000Z" -- November 30th 2016
|
|
DESCRIPTION
|
|
"Changes made for release r28:
|
|
- Added tp100gotnii board."
|
|
REVISION
|
|
"201512220000Z" -- December 22nd 2015
|
|
DESCRIPTION
|
|
"Changes made for release r27:
|
|
- Added fhau1 board
|
|
- Added fha1u1 board"
|
|
REVISION
|
|
"201511300000Z" -- Nov 30th 2015
|
|
DESCRIPTION
|
|
"Changes made for release r26:
|
|
- Added attribute dispersion search level
|
|
- Added Trx Fec type unavailable alarm."
|
|
REVISION
|
|
"201409300000Z" -- September 30th 2014
|
|
DESCRIPTION
|
|
"Changes made for release r23.1:
|
|
- Added mxp100gotn board."
|
|
REVISION
|
|
"201405160000Z" -- May 16th 2014
|
|
DESCRIPTION
|
|
"Changes made for release r23:
|
|
- Moved CounterSesReset attribute to otlcg table.
|
|
- Changed board name from tp10gotn to tphex10gotn.
|
|
- Added tpmrHL16G board"
|
|
REVISION
|
|
"201311150000Z" -- November 15th 2013
|
|
DESCRIPTION
|
|
"Changes made for release r22:
|
|
- Added tp10gotn and tp100gotn boards.
|
|
- Added the otlc and otlcg tables"
|
|
REVISION
|
|
"201305310000Z" -- May 31st 2013
|
|
DESCRIPTION
|
|
"Added attribute RxPowerLevelLowAbsoluteThld."
|
|
REVISION
|
|
"201211200000Z" -- November 20th 2012
|
|
DESCRIPTION
|
|
"The initial revision of this module."
|
|
::= { lumModules 48 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Compliance area, containing groups and compliance
|
|
-- specifications.
|
|
-- ----------------------------------------------------
|
|
|
|
lumIfOpticalConfs OBJECT IDENTIFIER ::= { lumIfOpticalMIB 1 }
|
|
lumIfOpticalGroups OBJECT IDENTIFIER ::= { lumIfOpticalConfs 1 }
|
|
lumIfOpticalCompl OBJECT IDENTIFIER ::= { lumIfOpticalConfs 2 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Root for objects in the IFOPTICAL MIB
|
|
-- ----------------------------------------------------
|
|
|
|
lumIfOpticalMIBObjects OBJECT IDENTIFIER ::= { lumIfOpticalMIB 2 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- This MIB contains the following groups:
|
|
-- ----------------------------------------------------
|
|
|
|
ifOpticalGeneral OBJECT IDENTIFIER ::= { lumIfOpticalMIBObjects 1 }
|
|
ifOpticalTransSectionList OBJECT IDENTIFIER ::= { lumIfOpticalMIBObjects 2 }
|
|
ifOpticalChannelList OBJECT IDENTIFIER ::= { lumIfOpticalMIBObjects 3 }
|
|
ifOpticalDigitalSignalRateList OBJECT IDENTIFIER ::= { lumIfOpticalMIBObjects 4 }
|
|
ifOpticalFecList OBJECT IDENTIFIER ::= { lumIfOpticalMIBObjects 5 }
|
|
ifOpticalTransLaneCarrierList OBJECT IDENTIFIER ::= { lumIfOpticalMIBObjects 6 }
|
|
ifOpticalTransLaneCarrierGroupList OBJECT IDENTIFIER ::= { lumIfOpticalMIBObjects 7 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- General group
|
|
-- ----------------------------------------------------
|
|
|
|
ifOpticalGeneralConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the MIB was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 1 }
|
|
|
|
ifOpticalGeneralStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or configuration of
|
|
the MIB was last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 2 }
|
|
|
|
ifOpticalGeneralIfOpticalTransSectionTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of optical section transmission table.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 3 }
|
|
|
|
ifOpticalGeneralIfOpticalTransSectionConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 4 }
|
|
|
|
ifOpticalGeneralIfOpticalTransSectionStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or configuration of the table
|
|
was last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 5 }
|
|
|
|
ifOpticalGeneralIfOpticalChannelTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of channel section table
|
|
|
|
"
|
|
::= { ifOpticalGeneral 6 }
|
|
|
|
ifOpticalGeneralIfOpticalChannelConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 7 }
|
|
|
|
ifOpticalGeneralIfOpticalChannelStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or the configuration of the
|
|
table was last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 8 }
|
|
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of digital signal rate table
|
|
|
|
"
|
|
::= { ifOpticalGeneral 9 }
|
|
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 10 }
|
|
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 11 }
|
|
|
|
ifOpticalGeneralIfOpticalFecTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of Fec table
|
|
|
|
"
|
|
::= { ifOpticalGeneral 12 }
|
|
|
|
ifOpticalGeneralIfOpticalFecConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 13 }
|
|
|
|
ifOpticalGeneralIfOpticalFecStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 14 }
|
|
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of OpticalTransLaneCarrier table
|
|
|
|
"
|
|
::= { ifOpticalGeneral 15 }
|
|
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 16 }
|
|
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 17 }
|
|
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierGroupTableSize OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of OpticalTransLaneCarrierGroup table
|
|
|
|
"
|
|
::= { ifOpticalGeneral 18 }
|
|
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierGrConfigLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 19 }
|
|
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierGrStateLastChangeTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time when the state and/or configuration of the table was
|
|
last changed.
|
|
|
|
"
|
|
::= { ifOpticalGeneral 20 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Optical transmission section group
|
|
-- ----------------------------------------------------
|
|
|
|
ifOpticalTransSectionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfOpticalTransSectionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The if optical transmission section interface list."
|
|
|
|
::= { ifOpticalTransSectionList 1 }
|
|
|
|
ifOpticalTransSectionEntry OBJECT-TYPE
|
|
SYNTAX IfOpticalTransSectionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ifOptical transmission section list.
|
|
|
|
"
|
|
INDEX { ifOpticalTransSectionIndex }
|
|
::= { ifOpticalTransSectionTable 1 }
|
|
|
|
IfOpticalTransSectionEntry ::=
|
|
SEQUENCE {
|
|
ifOpticalTransSectionIndex Unsigned32,
|
|
ifOpticalTransSectionName MgmtNameString,
|
|
ifOpticalTransSectionConnIfBasicIfIndex Unsigned32WithNA,
|
|
ifOpticalTransSectionForwardAls EnabledDisabledWithNA,
|
|
ifOpticalTransSectionRxPowerLevel Signed32WithNA,
|
|
ifOpticalTransSectionRxPowerLevelLowRelativeThld Signed32WithNA,
|
|
ifOpticalTransSectionTxPowerLevel Signed32WithNA,
|
|
ifOpticalTransSectionLaserMode LaserMode,
|
|
ifOpticalTransSectionLaserStatus OnOff,
|
|
ifOpticalTransSectionReceiverSensitivity Signed32WithNA,
|
|
ifOpticalTransSectionTxSignalStatus SignalStatusWithNA,
|
|
ifOpticalTransSectionRxSignalStatus SignalStatusWithNA,
|
|
ifOpticalTransSectionLossOfSignal FaultStatusWithNA,
|
|
ifOpticalTransSectionRxPowerLevelLow FaultStatusWithNA,
|
|
ifOpticalTransSectionRxPowerLevelHigh FaultStatusWithNA,
|
|
ifOpticalTransSectionRxExcessiveInputPower FaultStatusWithNA,
|
|
ifOpticalTransSectionTxPowerLow FaultStatusWithNA,
|
|
ifOpticalTransSectionRxPowerLevelLowAbsoluteThld Signed32WithNA,
|
|
ifOpticalTransSectionLossThld Signed32WithNA,
|
|
ifOpticalTransSectionLaserForcedOn EnabledDisabledWithNA}
|
|
|
|
ifOpticalTransSectionIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index assigned to each entry.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 1 }
|
|
|
|
ifOpticalTransSectionName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the optical transmission section,
|
|
for example 'ots:1:2:1-2', where the first number indicates
|
|
subrack, the second slot number and the third/fourth
|
|
are the physical port numbers.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 2 }
|
|
|
|
ifOpticalTransSectionConnIfBasicIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index describing to which index in ifBasicIf table
|
|
this object is related to.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 3 }
|
|
|
|
ifOpticalTransSectionForwardAls OBJECT-TYPE
|
|
SYNTAX EnabledDisabledWithNA
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forward Automatic Laser Shut-down. Decides if
|
|
laser shutdown of the client should occur when
|
|
a defect on the line or remote client is detected.
|
|
|
|
disabled - The laser is NOT turned off at defect
|
|
detection.
|
|
|
|
enabled - The laser is turned off at defect
|
|
detection.
|
|
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { ifOpticalTransSectionEntry 4 }
|
|
|
|
ifOpticalTransSectionRxPowerLevel OBJECT-TYPE
|
|
SYNTAX Signed32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received power level in units of 0.1 dBm.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 5 }
|
|
|
|
ifOpticalTransSectionRxPowerLevelLowRelativeThld OBJECT-TYPE
|
|
SYNTAX Signed32WithNA (-50..100 | 2147483646 | 2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower threshold for received power level in
|
|
units of 0.1 dB, relative to the receiver
|
|
sensitivity.
|
|
|
|
"
|
|
DEFVAL { 30 }
|
|
::= { ifOpticalTransSectionEntry 6 }
|
|
|
|
ifOpticalTransSectionTxPowerLevel OBJECT-TYPE
|
|
SYNTAX Signed32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmitted power level in units of 0.1 dBm.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 7 }
|
|
|
|
ifOpticalTransSectionLaserMode OBJECT-TYPE
|
|
SYNTAX LaserMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the TX-side laser.
|
|
|
|
als - Automatic Laser Shutdown/Turn-Off
|
|
when lossOfSignal is detected on the RX side of
|
|
the trunk interface.
|
|
|
|
forcedOn - Laser is on even if lossOfSignal is
|
|
active on the same interface
|
|
|
|
"
|
|
DEFVAL { forcedOn }
|
|
::= { ifOpticalTransSectionEntry 8 }
|
|
|
|
ifOpticalTransSectionLaserStatus OBJECT-TYPE
|
|
SYNTAX OnOff
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual state of the TX-side laser.
|
|
|
|
on - The laser is turned on.
|
|
|
|
off - The laser is turned off.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 9 }
|
|
|
|
ifOpticalTransSectionReceiverSensitivity OBJECT-TYPE
|
|
SYNTAX Signed32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest power that the receiver is guaranteed
|
|
to handle, in units of 0.1 dBm.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 10 }
|
|
|
|
ifOpticalTransSectionTxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for outgoing (TX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 11 }
|
|
|
|
|
|
ifOpticalTransSectionRxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for incoming (RX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 12 }
|
|
|
|
ifOpticalTransSectionLossOfSignal OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of signal (LOS).
|
|
|
|
The received signal has disappeared.
|
|
|
|
alarm - Loss of signal active
|
|
|
|
ok - Loss of signal is not active
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 13 }
|
|
|
|
ifOpticalTransSectionRxPowerLevelLow OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low rx power.
|
|
|
|
Received power level low threshold exceeded.
|
|
|
|
Applicable for all signal formats.
|
|
|
|
alarm: The received power level is below the
|
|
associated threshold.
|
|
|
|
ok: The received power level is at least 0.5 dB
|
|
above the threshold.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 14 }
|
|
|
|
ifOpticalTransSectionRxPowerLevelHigh OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"High rx power.
|
|
|
|
Received power level is too high.
|
|
|
|
Applicable for all signal formats.
|
|
|
|
alarm: The received power level is too high.
|
|
|
|
ok: The received power level is at least 0.5 dB
|
|
below the overload threshold.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 15 }
|
|
|
|
ifOpticalTransSectionRxExcessiveInputPower OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Excessively high rx power.
|
|
|
|
Received power level is excessively high.
|
|
|
|
Applicable for all signal formats.
|
|
|
|
alarm: The received power level is excessively high.
|
|
|
|
ok: The received power level is normal.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 16 }
|
|
|
|
ifOpticalTransSectionTxPowerLow OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low tx power.
|
|
|
|
Transmit power is lower than the set threshold.
|
|
|
|
Applicable for all signal formats.
|
|
|
|
alarm: The transmit power level is lower than threshold.
|
|
|
|
ok: The transmit power level is normal.
|
|
|
|
"
|
|
::= { ifOpticalTransSectionEntry 17 }
|
|
|
|
ifOpticalTransSectionRxPowerLevelLowAbsoluteThld OBJECT-TYPE
|
|
SYNTAX Signed32WithNA (-300..50 | 2147483646 | 2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower threshold for received power level in
|
|
units of 0.1 dB.
|
|
|
|
"
|
|
DEFVAL { -140 }
|
|
::= { ifOpticalTransSectionEntry 18 }
|
|
|
|
ifOpticalTransSectionLossThld OBJECT-TYPE
|
|
SYNTAX Signed32WithNA (-420..60 | 2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The threshold to declare LOS.
|
|
|
|
"
|
|
DEFVAL { -350 }
|
|
::= { ifOpticalTransSectionEntry 19 }
|
|
|
|
ifOpticalTransSectionLaserForcedOn OBJECT-TYPE
|
|
SYNTAX EnabledDisabledWithNA
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When enabled, the laser is forced on regardless of
|
|
circumstances. Be aware that enabling this mode might
|
|
interfere with other functions and affect working traffic.
|
|
When used with Y-cable (Optical coupler) protection it is
|
|
expected that the TX fiber is manually removed prior to
|
|
the command.
|
|
|
|
disabled - The laser is controlled automatically by the system.
|
|
|
|
enabled - The laser is forced on.
|
|
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { ifOpticalTransSectionEntry 20 }
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Optical channel group
|
|
-- ----------------------------------------------------
|
|
|
|
ifOpticalChannelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfOpticalChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The if optical channel interface list."
|
|
::= { ifOpticalChannelList 1 }
|
|
|
|
ifOpticalChannelEntry OBJECT-TYPE
|
|
SYNTAX IfOpticalChannelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ifOptical channel list.
|
|
"
|
|
INDEX { ifOpticalChannelIndex }
|
|
::= { ifOpticalChannelTable 1 }
|
|
|
|
IfOpticalChannelEntry ::=
|
|
SEQUENCE {
|
|
ifOpticalChannelIndex Unsigned32,
|
|
ifOpticalChannelName MgmtNameString,
|
|
ifOpticalChannelConnIfBasicIfIndex Unsigned32WithNA,
|
|
ifOpticalChannelTxFrequency Frequency,
|
|
ifOpticalChannelExpectedTxFrequency FrequencyOnlyNotApplicable,
|
|
ifOpticalChannelTxSignalStatus SignalStatusWithNA,
|
|
ifOpticalChannelRxSignalStatus SignalStatusWithNA,
|
|
ifOpticalChannelIllegalTxFrequency FaultStatusWithNA,
|
|
ifOpticalChannelUnexpectedTxFrequency FaultStatusWithNA,
|
|
ifOpticalChannelNoTxFrequencySet FaultStatusWithNA,
|
|
ifOpticalChannelDispersionSearchLimit DispersionSearchLimit,
|
|
ifOpticalChannelLaserNotTuned FaultStatusWithNA,
|
|
ifOpticalChannelLineCoding INTEGER }
|
|
|
|
ifOpticalChannelIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index assigned to each entry.
|
|
|
|
"
|
|
::= { ifOpticalChannelEntry 1 }
|
|
|
|
ifOpticalChannelName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the optical channel,
|
|
for example 'och:1:2:1-2', where the first number indicates
|
|
subrack, the second slot number and the third/fourth
|
|
are the physical port numbers.
|
|
|
|
"
|
|
::= { ifOpticalChannelEntry 2 }
|
|
|
|
ifOpticalChannelConnIfBasicIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index describing to which index in ifBasicIf table
|
|
this object is related to.
|
|
|
|
"
|
|
::= { ifOpticalChannelEntry 3 }
|
|
|
|
ifOpticalChannelTxFrequency OBJECT-TYPE
|
|
SYNTAX Frequency
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmitted frequency given in wavelength nm
|
|
or as channels.
|
|
E.g. ch871 means the frequency 187.1 THz.
|
|
w1310 means the wavelength 1310 nm.
|
|
|
|
"
|
|
::= { ifOpticalChannelEntry 4 }
|
|
|
|
ifOpticalChannelExpectedTxFrequency OBJECT-TYPE
|
|
SYNTAX FrequencyOnlyNotApplicable
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expected frequency given in wavelength nm
|
|
or as channels.
|
|
E.g. ch871 means the frequency 187.1 THz.
|
|
w1310 means the wavelength 1310 nm.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { ifOpticalChannelEntry 5 }
|
|
|
|
ifOpticalChannelTxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for outgoing (TX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalChannelEntry 6 }
|
|
|
|
ifOpticalChannelRxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for incoming (RX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalChannelEntry 7 }
|
|
|
|
ifOpticalChannelIllegalTxFrequency OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Illegal tx frequency.
|
|
|
|
The tx frequency supported by the transceiver is not
|
|
recognized by the system.
|
|
|
|
alarm: Invalid or unknown frequency information is
|
|
detected in the (pluggable) transceiver or
|
|
board production data.
|
|
|
|
ok: The (pluggable) transceiver or board is
|
|
replaced.
|
|
|
|
"
|
|
::= { ifOpticalChannelEntry 8 }
|
|
|
|
ifOpticalChannelUnexpectedTxFrequency OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unexpected transmitted frequency.
|
|
|
|
The actual frequency does not match the
|
|
pre-configured frequency.
|
|
|
|
A pre-configured frequency of '0' matches
|
|
all actual frequencies.
|
|
|
|
alarm: The configured frequency does not match the
|
|
actual frequency.
|
|
|
|
ok: The configured frequency matches the actual
|
|
frequency.
|
|
|
|
"
|
|
::= { ifOpticalChannelEntry 9 }
|
|
|
|
ifOpticalChannelNoTxFrequencySet OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"No tx frequency set.
|
|
|
|
The tunable laser frequency has not been set.
|
|
|
|
alarm: Tunable laser frequency is not set.
|
|
|
|
ok: Tunable laser frequency is set.
|
|
|
|
"
|
|
::= { ifOpticalChannelEntry 10 }
|
|
|
|
ifOpticalChannelDispersionSearchLimit OBJECT-TYPE
|
|
SYNTAX DispersionSearchLimit
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The upper search limit for the module dispersion compensator. Medium
|
|
= 22,500 ps/nm, which corresponds to approximately 1300 km standard
|
|
fiber. High = 30,000 ps/nm, which corresponds to approximately 1700 km
|
|
standard fiber. The default value is Medium.
|
|
|
|
"
|
|
DEFVAL { medium }
|
|
::= { ifOpticalChannelEntry 11 }
|
|
|
|
ifOpticalChannelLaserNotTuned OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Laser not tuned.
|
|
|
|
The tunable laser is not tuned to set frequency yet.
|
|
This alarm can be cleared by setting the attribute
|
|
LaserForcedOn to enabled. Note that this can disturb
|
|
traffic. See the help for LaserForcedOn in optical
|
|
transsection for more information.
|
|
|
|
alarm: Tunable laser is not tuned to set frequency.
|
|
|
|
ok: Tunable laser is tuned to set frequency.
|
|
|
|
"
|
|
::= { ifOpticalChannelEntry 12 }
|
|
|
|
ifOpticalChannelLineCoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
qam16 (1),
|
|
dqpsk (2),
|
|
qpsk (3),
|
|
notApplicable (2147483647)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Line coding.
|
|
|
|
qam16 - 16QAM
|
|
dqpsk - D-QPSK
|
|
qpsk - QPSK
|
|
notApplicable - 2147483647 is used to indicate that the attribute
|
|
is not used on the board.
|
|
|
|
"
|
|
DEFVAL { notApplicable }
|
|
::= { ifOpticalChannelEntry 13 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Optical digital signal rate group
|
|
-- ----------------------------------------------------
|
|
|
|
ifOpticalDigitalSignalRateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfOpticalDigitalSignalRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The if optical digital signal rate interface list."
|
|
|
|
::= { ifOpticalDigitalSignalRateList 1 }
|
|
|
|
ifOpticalDigitalSignalRateEntry OBJECT-TYPE
|
|
SYNTAX IfOpticalDigitalSignalRateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ifOptical digital signal rate list.
|
|
|
|
"
|
|
INDEX { ifOpticalDigitalSignalRateIndex }
|
|
::= { ifOpticalDigitalSignalRateTable 1 }
|
|
|
|
IfOpticalDigitalSignalRateEntry ::=
|
|
SEQUENCE {
|
|
ifOpticalDigitalSignalRateIndex Unsigned32,
|
|
ifOpticalDigitalSignalRateName MgmtNameString,
|
|
ifOpticalDigitalSignalRateConnIfBasicIfIndex Unsigned32WithNA,
|
|
ifOpticalDigitalSignalRateMaxBitRate Unsigned32WithNA,
|
|
ifOpticalDigitalSignalRateMinBitRate Unsigned32WithNA,
|
|
ifOpticalDigitalSignalRateTxSignalStatus SignalStatusWithNA,
|
|
ifOpticalDigitalSignalRateRxSignalStatus SignalStatusWithNA,
|
|
ifOpticalDigitalSignalRateLossOfLock FaultStatusWithNA,
|
|
ifOpticalDigitalSignalRateBitrateUnavailable FaultStatusWithNA }
|
|
|
|
ifOpticalDigitalSignalRateIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index assigned to each entry.
|
|
|
|
"
|
|
::= { ifOpticalDigitalSignalRateEntry 1 }
|
|
|
|
ifOpticalDigitalSignalRateName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the optical channel,
|
|
for example 'dsr:1:2:1-2', where the first number indicates
|
|
subrack, the second slot number and the third/fourth
|
|
are the physical port numbers.
|
|
|
|
"
|
|
::= { ifOpticalDigitalSignalRateEntry 2 }
|
|
|
|
ifOpticalDigitalSignalRateConnIfBasicIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index describing to which index in ifBasicIf table
|
|
this object is related to.
|
|
|
|
"
|
|
::= { ifOpticalDigitalSignalRateEntry 3 }
|
|
|
|
ifOpticalDigitalSignalRateMaxBitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The max signal bit rate in units of
|
|
1,000 000 bits (mb) per second.
|
|
|
|
"
|
|
::= { ifOpticalDigitalSignalRateEntry 5 }
|
|
|
|
ifOpticalDigitalSignalRateMinBitRate OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"The min signal bit rate in units of
|
|
1,000 000 bits (mb) per second.
|
|
|
|
"
|
|
::= { ifOpticalDigitalSignalRateEntry 6 }
|
|
|
|
ifOpticalDigitalSignalRateTxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for outgoing (TX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalDigitalSignalRateEntry 7 }
|
|
|
|
ifOpticalDigitalSignalRateRxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for incoming (RX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalDigitalSignalRateEntry 8 }
|
|
|
|
ifOpticalDigitalSignalRateLossOfLock OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of lock.
|
|
|
|
The receiver could not lock to the rate of the incoming signal.
|
|
|
|
alarm: The signal could not be locked.
|
|
|
|
ok: The signal could be locked.
|
|
|
|
"
|
|
::= { ifOpticalDigitalSignalRateEntry 9 }
|
|
|
|
ifOpticalDigitalSignalRateBitrateUnavailable OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
"Bitrate unavailable.
|
|
|
|
The inserted transceiver does not support the
|
|
requested bit rate.
|
|
|
|
alarm: A transceiver with other supported bit rate than
|
|
the requested bit rate is inserted.
|
|
|
|
ok: The transceiver with the non-requested bit rate
|
|
is removed, or the object is reconfigured.
|
|
|
|
"
|
|
::= { ifOpticalDigitalSignalRateEntry 10 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Optical FEC group
|
|
-- ----------------------------------------------------
|
|
|
|
ifOpticalFecTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfOpticalFecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The if optical Fec list."
|
|
|
|
::= { ifOpticalFecList 1 }
|
|
|
|
ifOpticalFecEntry OBJECT-TYPE
|
|
SYNTAX IfOpticalFecEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ifOptical Fec list.
|
|
|
|
"
|
|
INDEX { ifOpticalFecIndex }
|
|
::= { ifOpticalFecTable 1 }
|
|
|
|
IfOpticalFecEntry ::=
|
|
SEQUENCE {
|
|
ifOpticalFecIndex Unsigned32,
|
|
ifOpticalFecName MgmtNameString,
|
|
ifOpticalFecConnIfBasicIfIndex Unsigned32WithNA,
|
|
ifOpticalFecType FecType,
|
|
ifOpticalFecTxSignalStatus SignalStatusWithNA,
|
|
ifOpticalFecRxSignalStatus SignalStatusWithNA,
|
|
ifOpticalFecFailure FaultStatusWithNA,
|
|
ifOpticalFecSignalDegraded FaultStatusWithNA,
|
|
ifOpticalFecSignalDegradeThreshold BerLevelMTOSI,
|
|
ifOpticalFecTypeUnavailable FaultStatus,
|
|
ifOpticalFecUId Unsigned32,
|
|
ifOpticalFecDecModeMismatch FaultStatusWithNA}
|
|
|
|
ifOpticalFecIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index assigned to each entry.
|
|
|
|
"
|
|
::= { ifOpticalFecEntry 1 }
|
|
|
|
ifOpticalFecName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the FEC object,
|
|
for example 'lineFec:1:2:1-2', where the first number
|
|
indicates subrack, the second slot number and the
|
|
third/fourth are the physical port numbers.
|
|
|
|
"
|
|
::= { ifOpticalFecEntry 2 }
|
|
|
|
ifOpticalFecConnIfBasicIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index describing to which index in ifBasicIf table
|
|
this object is related to.
|
|
|
|
"
|
|
::= { ifOpticalFecEntry 3 }
|
|
|
|
ifOpticalFecType OBJECT-TYPE
|
|
SYNTAX FecType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Set type of FEC.
|
|
|
|
g709 - 1st generation FEC according to
|
|
ITU-T G.709 (near 6 dB coding gain).
|
|
|
|
g9751I4 - FEC according to G975.1 I.4. Outer code: RS(1023,1007),
|
|
Inner code: BCH(2047,1952).
|
|
|
|
g9751I7 - FEC according to G975.1 I.7. Two orthogonally
|
|
concatenated BCH codes.
|
|
|
|
sdFec - Proprietary Soft Decision FEC scheme.
|
|
|
|
"
|
|
DEFVAL { g709 }
|
|
::= { ifOpticalFecEntry 4 }
|
|
|
|
ifOpticalFecTxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for outgoing (TX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalFecEntry 5 }
|
|
|
|
ifOpticalFecRxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for incoming (RX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalFecEntry 6 }
|
|
|
|
ifOpticalFecFailure OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FEC failure.
|
|
|
|
Too many errors to get valid FEC statistics. It is not
|
|
possible to run control loops based on FEC statistics.
|
|
|
|
A: Too many errors to get valid FEC statistics.
|
|
|
|
D: The FEC statistics is valid.
|
|
|
|
"
|
|
::= { ifOpticalFecEntry 7 }
|
|
|
|
ifOpticalFecSignalDegraded OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Signal degraded (SD).
|
|
|
|
Too many error corrected. If more errors are corrected
|
|
it might effect the client signal in a negative way.
|
|
|
|
"
|
|
::= { ifOpticalFecEntry 8 }
|
|
|
|
ifOpticalFecSignalDegradeThreshold OBJECT-TYPE
|
|
SYNTAX BerLevelMTOSI
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Threshold for signal degraded alarm,
|
|
based on BER value.
|
|
|
|
Predefined levels
|
|
|
|
rxBerLevel1 = 1E-12
|
|
rxBerLevel2 = 1E-13
|
|
rxBerLevel3 = 1E-15
|
|
|
|
OSNRMargin1 = 0.5 dB margin with respect to FEC cliff
|
|
OSNRMargin2 = 1.0 dB margin with respect to FEC cliff
|
|
|
|
"
|
|
DEFVAL { rxBerLevel2 }
|
|
::= { ifOpticalFecEntry 9 }
|
|
|
|
ifOpticalFecTypeUnavailable OBJECT-TYPE
|
|
SYNTAX FaultStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Fec type unavailable.
|
|
|
|
The inserted transceiver does not support the
|
|
requested fec type.
|
|
|
|
alarm: A transceiver with other supported fec type
|
|
han the requested bit rate is inserted.
|
|
|
|
ok: The transceiver with the non-requested fec type
|
|
is removed, or the object is reconfigured.
|
|
|
|
"
|
|
::= { ifOpticalFecEntry 10 }
|
|
|
|
ifOpticalFecUId OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unique Identifier for the entry
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { ifOpticalFecEntry 11 }
|
|
|
|
ifOpticalFecDecModeMismatch OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"FEC decoding mode mismatch.
|
|
|
|
"
|
|
::= { ifOpticalFecEntry 12 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Optical Transport Lane Carrier group
|
|
-- ----------------------------------------------------
|
|
|
|
ifOpticalTransLaneCarrierTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfOpticalTransLaneCarrierEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The if optical transport lane carrier list.
|
|
Structure and nomenclature in table is derived
|
|
from G.709 fig. 7-1B"
|
|
|
|
::= { ifOpticalTransLaneCarrierList 1 }
|
|
|
|
ifOpticalTransLaneCarrierEntry OBJECT-TYPE
|
|
SYNTAX IfOpticalTransLaneCarrierEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ifOptical transport lane carrier list.
|
|
|
|
"
|
|
INDEX { ifOpticalTransLaneCarrierIndex }
|
|
::= { ifOpticalTransLaneCarrierTable 1 }
|
|
|
|
IfOpticalTransLaneCarrierEntry ::=
|
|
SEQUENCE {
|
|
ifOpticalTransLaneCarrierIndex Unsigned32,
|
|
ifOpticalTransLaneCarrierName MgmtNameString,
|
|
ifOpticalTransLaneCarrierConnIfBasicIfIndex Unsigned32WithNA,
|
|
ifOpticalTransLaneCarrierConnIfOpticalTransLaneCarrierGrIndex Unsigned32WithNA,
|
|
ifOpticalTransLaneCarrierLaneId Unsigned32,
|
|
ifOpticalTransLaneCarrierTxSignalStatus SignalStatusWithNA,
|
|
ifOpticalTransLaneCarrierRxSignalStatus SignalStatusWithNA,
|
|
ifOpticalTransLaneCarrierRxPowerLevel Signed32WithNA,
|
|
ifOpticalTransLaneCarrierLossOfSignal FaultStatusWithNA,
|
|
ifOpticalTransLaneCarrierReceiverSensitivity Signed32WithNA,
|
|
ifOpticalTransLaneCarrierRxPowerLevelLow FaultStatusWithNA,
|
|
ifOpticalTransLaneCarrierTxFrequency LaneFrequency,
|
|
ifOpticalTransLaneCarrierCounterSes Unsigned32WithNA,
|
|
ifOpticalTransLaneCarrierCounterSesReset ResetWithNA}
|
|
|
|
ifOpticalTransLaneCarrierIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index assigned to each entry.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 1 }
|
|
|
|
ifOpticalTransLaneCarrierName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the OTLC object,
|
|
for example 'lineOtlc:1:2:1-2:1', where the first number
|
|
indicates subrack, the second slot number, the
|
|
third/fourth are the physical port numbers and the last is lane number.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 2 }
|
|
|
|
ifOpticalTransLaneCarrierConnIfBasicIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index describing to which index in ifBasicIf table
|
|
this object is related to.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 3 }
|
|
|
|
ifOpticalTransLaneCarrierConnIfOpticalTransLaneCarrierGrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index describing to which index in ifOpticalTransLaneCarrierGroup table
|
|
this object is related to.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 4 }
|
|
|
|
ifOpticalTransLaneCarrierLaneId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Lane number.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 5 }
|
|
|
|
ifOpticalTransLaneCarrierTxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for outgoing (TX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 6 }
|
|
|
|
ifOpticalTransLaneCarrierRxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for incoming (RX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 7 }
|
|
|
|
ifOpticalTransLaneCarrierRxPowerLevel OBJECT-TYPE
|
|
SYNTAX Signed32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The received power level in units of 0.1 dBm.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 8 }
|
|
|
|
ifOpticalTransLaneCarrierLossOfSignal OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of signal (LOS).
|
|
|
|
The received signal has disappeared.
|
|
|
|
alarm - Loss Of Signal active
|
|
|
|
ok - Loss of signal is not active
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 9 }
|
|
|
|
ifOpticalTransLaneCarrierReceiverSensitivity OBJECT-TYPE
|
|
SYNTAX Signed32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest power that the receiver is guaranteed
|
|
to handle, per lane, in units of 0.1 dBm.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 10 }
|
|
|
|
ifOpticalTransLaneCarrierRxPowerLevelLow OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low rx power.
|
|
|
|
Received power level low threshold exceeded.
|
|
Relative to the threshold in the OTLCG table
|
|
(Lane sensitivity + threshold).
|
|
|
|
Applicable for all signal formats.
|
|
|
|
alarm: The received power level is below the
|
|
associated threshold.
|
|
|
|
ok: The received power level is at least 0.5 dBm
|
|
above the threshold.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 11 }
|
|
|
|
ifOpticalTransLaneCarrierTxFrequency OBJECT-TYPE
|
|
SYNTAX LaneFrequency
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmitted frequency given in wavelength nm
|
|
or as channels.
|
|
E.g. ch871 means the frequency 187.1 THz.
|
|
w1310 means the wavelength 1310 nm.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 12 }
|
|
|
|
ifOpticalTransLaneCarrierCounterSes OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Severely Errored Seconds.
|
|
The counter associated with the number of
|
|
errored seconds (seconds with LOS) in the interval per lane.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierEntry 13 }
|
|
|
|
ifOpticalTransLaneCarrierCounterSesReset OBJECT-TYPE
|
|
SYNTAX ResetWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Reset SES Counter.
|
|
After a successful reset the default value
|
|
(normal) is restored in this attribute.
|
|
|
|
"
|
|
DEFVAL { normal }
|
|
::= { ifOpticalTransLaneCarrierEntry 14 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Optical Transport Lane Carrier Group group
|
|
-- ----------------------------------------------------
|
|
|
|
ifOpticalTransLaneCarrierGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfOpticalTransLaneCarrierGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The if optical transport lane carrier group list."
|
|
|
|
::= { ifOpticalTransLaneCarrierGroupList 1 }
|
|
|
|
ifOpticalTransLaneCarrierGroupEntry OBJECT-TYPE
|
|
SYNTAX IfOpticalTransLaneCarrierGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the ifOptical transport lane carrier group list.
|
|
|
|
"
|
|
INDEX { ifOpticalTransLaneCarrierGroupIndex }
|
|
::= { ifOpticalTransLaneCarrierGroupTable 1 }
|
|
|
|
IfOpticalTransLaneCarrierGroupEntry ::=
|
|
SEQUENCE {
|
|
ifOpticalTransLaneCarrierGroupIndex Unsigned32,
|
|
ifOpticalTransLaneCarrierGroupName MgmtNameString,
|
|
ifOpticalTransLaneCarrierGroupConnIfBasicIfIndex Unsigned32WithNA,
|
|
ifOpticalTransLaneCarrierGroupForwardAls EnabledDisabledWithNA,
|
|
ifOpticalTransLaneCarrierGroupLaserStatus OnOff,
|
|
ifOpticalTransLaneCarrierGroupTxPowerLevel Signed32WithNA,
|
|
ifOpticalTransLaneCarrierGroupRxSignalStatus SignalStatusWithNA,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevel Signed32WithNA,
|
|
ifOpticalTransLaneCarrierGroupTxSignalStatus SignalStatusWithNA,
|
|
ifOpticalTransLaneCarrierGroupLossOfSignal FaultStatusWithNA,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevelLowRelativeThld Signed32WithNA,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevelLow FaultStatusWithNA,
|
|
ifOpticalTransLaneCarrierGroupTxFrequency Frequency,
|
|
ifOpticalTransLaneCarrierGroupExpectedTxFrequency FrequencyOnlyNotApplicable,
|
|
ifOpticalTransLaneCarrierGroupUnexpectedTxFrequency FaultStatusWithNA,
|
|
ifOpticalTransLaneCarrierGroupIllegalTxFrequency FaultStatusWithNA,
|
|
ifOpticalTransLaneCarrierGroupCounterSesReset ResetWithNA,
|
|
ifOpticalTransLaneCarrierGroupMinimumLaneRxPowerLevel Signed32WithNA,
|
|
ifOpticalTransLaneCarrierGroupReceiverLaneSensitivity Signed32WithNA}
|
|
|
|
ifOpticalTransLaneCarrierGroupIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index assigned to each entry.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 1 }
|
|
|
|
ifOpticalTransLaneCarrierGroupName OBJECT-TYPE
|
|
SYNTAX MgmtNameString
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The management name of the OTLCG object,
|
|
for example 'lineOtlcg:1:2:1-2', where the first number
|
|
indicates subrack, the second slot number, the
|
|
third/fourth are the physical port numbers.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 2 }
|
|
|
|
ifOpticalTransLaneCarrierGroupConnIfBasicIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32WithNA
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index describing to which index in ifBasicIf table
|
|
this object is related to.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 3 }
|
|
|
|
ifOpticalTransLaneCarrierGroupTxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for outgoing (TX) signal
|
|
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 4 }
|
|
|
|
ifOpticalTransLaneCarrierGroupRxSignalStatus OBJECT-TYPE
|
|
SYNTAX SignalStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state for incoming (RX) signal
|
|
of the interface.
|
|
|
|
down - A major fault has occurred.
|
|
|
|
degraded - The signal quality is impaired.
|
|
|
|
up - The signal is OK.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 5 }
|
|
|
|
ifOpticalTransLaneCarrierGroupForwardAls OBJECT-TYPE
|
|
SYNTAX EnabledDisabledWithNA
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Forward Automatic Laser Shut-down. Decides if
|
|
laser shutdown of the client should occur when
|
|
a defect on the line or remote client is detected.
|
|
|
|
disabled - The laser is NOT turned off at defect
|
|
detection.
|
|
|
|
enabled - The laser is turned off at defect
|
|
detection.
|
|
|
|
"
|
|
DEFVAL { disabled }
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 6 }
|
|
|
|
ifOpticalTransLaneCarrierGroupLaserStatus OBJECT-TYPE
|
|
SYNTAX OnOff
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual state of the TX-side laser.
|
|
|
|
on - The laser is turned on.
|
|
|
|
off - The laser is turned off.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 7 }
|
|
|
|
ifOpticalTransLaneCarrierGroupTxPowerLevel OBJECT-TYPE
|
|
SYNTAX Signed32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total transmitted power level, including all lanes,
|
|
in units of 0.1 dBm.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 8 }
|
|
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevel OBJECT-TYPE
|
|
SYNTAX Signed32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total received power level, including all lanes,
|
|
in units of 0.1 dBm.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 9 }
|
|
|
|
ifOpticalTransLaneCarrierGroupLossOfSignal OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Loss of signal (LOS).
|
|
|
|
The received signal has disappeared.
|
|
|
|
alarm - Loss Of Signal active
|
|
|
|
ok - Loss of signal is not active
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 10 }
|
|
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevelLowRelativeThld OBJECT-TYPE
|
|
SYNTAX Signed32WithNA (-50..100 | 2147483646 | 2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lower threshold for received power level in
|
|
units of 0.1 dB, relative to the receiver
|
|
sensitivity.
|
|
If multi lane transceiver is used this threshold
|
|
is used on all lanes.
|
|
|
|
"
|
|
DEFVAL { 30 }
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 11 }
|
|
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevelLow OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Low rx power.
|
|
|
|
Received power level low threshold exceeded.
|
|
If multi lane transceiver is used the threshold
|
|
is exceeded on at least one lane.
|
|
|
|
Applicable for all signal formats.
|
|
|
|
alarm: The received power level is below the
|
|
associated threshold.
|
|
|
|
ok: The received power level is at least 0.5 dBm
|
|
above the threshold.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 12 }
|
|
|
|
ifOpticalTransLaneCarrierGroupTxFrequency OBJECT-TYPE
|
|
SYNTAX Frequency
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The transmitted frequency given in wavelength nm
|
|
or as channels, in case of multi lambda lane transciever
|
|
this is the base frequency.
|
|
E.g. ch871 means the frequency 187.1 THz.
|
|
w1310 means the wavelength 1310 nm.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 13 }
|
|
|
|
ifOpticalTransLaneCarrierGroupExpectedTxFrequency OBJECT-TYPE
|
|
SYNTAX FrequencyOnlyNotApplicable
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The expected frequency given in wavelength nm
|
|
or as channels.
|
|
E.g. ch871 means the frequency 187.1 THz.
|
|
w1310 means the wavelength 1310 nm.
|
|
|
|
"
|
|
DEFVAL { 0 }
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 14 }
|
|
|
|
ifOpticalTransLaneCarrierGroupUnexpectedTxFrequency OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Unexpected transmitted frequency.
|
|
|
|
The actual frequency does not match the
|
|
pre-configured frequency.
|
|
|
|
A pre-configured frequency of '0' matches
|
|
all actual frequencies.
|
|
|
|
alarm: The configured frequency does not match the
|
|
actual frequency.
|
|
|
|
ok: The configured frequency matches the actual
|
|
frequency.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 15 }
|
|
|
|
ifOpticalTransLaneCarrierGroupIllegalTxFrequency OBJECT-TYPE
|
|
SYNTAX FaultStatusWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Illegal tx frequency.
|
|
|
|
The tx frequency supported by the transceiver is not
|
|
recognized by the system.
|
|
|
|
alarm: Invalid or unknown frequency information is
|
|
detected in the (pluggable) transceiver or
|
|
board production data.
|
|
|
|
ok: The (pluggable) transceiver or board is
|
|
replaced.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 16 }
|
|
|
|
ifOpticalTransLaneCarrierGroupCounterSesReset OBJECT-TYPE
|
|
SYNTAX ResetWithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Reset SES Counter.
|
|
After a successful reset the default value
|
|
(normal) is restored in this attribute.
|
|
|
|
"
|
|
DEFVAL { normal }
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 17 }
|
|
|
|
ifOpticalTransLaneCarrierGroupMinimumLaneRxPowerLevel OBJECT-TYPE
|
|
SYNTAX Signed32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The minimum received power level on any lane in units of 0.1 dBm.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 18 }
|
|
|
|
ifOpticalTransLaneCarrierGroupReceiverLaneSensitivity OBJECT-TYPE
|
|
SYNTAX Signed32WithNA
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest power that the receiver is guaranteed
|
|
to handle, on a single lane, in units of 0.1 dBm.
|
|
|
|
"
|
|
::= { ifOpticalTransLaneCarrierGroupEntry 19 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Notifications
|
|
-- ----------------------------------------------------
|
|
|
|
|
|
-- ----------------------------------------------------
|
|
-- Object and event groups
|
|
-- ----------------------------------------------------
|
|
|
|
ifOpticalGeneralGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalGeneralConfigLastChangeTime,
|
|
ifOpticalGeneralStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalTransSectionTableSize,
|
|
ifOpticalGeneralIfOpticalTransSectionConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalTransSectionStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalChannelTableSize,
|
|
ifOpticalGeneralIfOpticalChannelConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalChannelStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateTableSize,
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateStateLastChangeTime }
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The general objects."
|
|
::= { lumIfOpticalGroups 1 }
|
|
|
|
ifOpticalTransSectionGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalTransSectionIndex,
|
|
ifOpticalTransSectionName,
|
|
ifOpticalTransSectionConnIfBasicIfIndex,
|
|
ifOpticalTransSectionForwardAls,
|
|
ifOpticalTransSectionRxPowerLevel,
|
|
ifOpticalTransSectionRxPowerLevelLowRelativeThld,
|
|
ifOpticalTransSectionTxPowerLevel,
|
|
ifOpticalTransSectionLaserMode,
|
|
ifOpticalTransSectionLaserStatus,
|
|
ifOpticalTransSectionReceiverSensitivity,
|
|
ifOpticalTransSectionTxSignalStatus,
|
|
ifOpticalTransSectionRxSignalStatus,
|
|
ifOpticalTransSectionLossOfSignal,
|
|
ifOpticalTransSectionRxPowerLevelLow,
|
|
ifOpticalTransSectionRxPowerLevelHigh,
|
|
ifOpticalTransSectionRxExcessiveInputPower,
|
|
ifOpticalTransSectionTxPowerLow }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifOptical transmission section objects (R20.0)."
|
|
::= { lumIfOpticalGroups 2 }
|
|
|
|
ifOpticalChannelGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalChannelIndex,
|
|
ifOpticalChannelName,
|
|
ifOpticalChannelConnIfBasicIfIndex,
|
|
ifOpticalChannelTxFrequency,
|
|
ifOpticalChannelExpectedTxFrequency,
|
|
ifOpticalChannelTxSignalStatus,
|
|
ifOpticalChannelRxSignalStatus,
|
|
ifOpticalChannelIllegalTxFrequency,
|
|
ifOpticalChannelUnexpectedTxFrequency,
|
|
ifOpticalChannelNoTxFrequencySet }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifOptical channel objects (R20.0)."
|
|
::= { lumIfOpticalGroups 3 }
|
|
|
|
ifOpticalDigitalSignalRateGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalDigitalSignalRateIndex,
|
|
ifOpticalDigitalSignalRateName,
|
|
ifOpticalDigitalSignalRateConnIfBasicIfIndex,
|
|
ifOpticalDigitalSignalRateMaxBitRate,
|
|
ifOpticalDigitalSignalRateMinBitRate,
|
|
ifOpticalDigitalSignalRateTxSignalStatus,
|
|
ifOpticalDigitalSignalRateRxSignalStatus,
|
|
ifOpticalDigitalSignalRateLossOfLock,
|
|
ifOpticalDigitalSignalRateBitrateUnavailable }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifOptical digital signal rate objects (R20.0)."
|
|
::= { lumIfOpticalGroups 4 }
|
|
|
|
ifOpticalFecGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalFecIndex,
|
|
ifOpticalFecName,
|
|
ifOpticalFecConnIfBasicIfIndex,
|
|
ifOpticalFecType,
|
|
ifOpticalFecTxSignalStatus,
|
|
ifOpticalFecRxSignalStatus,
|
|
ifOpticalFecFailure,
|
|
ifOpticalFecSignalDegraded,
|
|
ifOpticalFecSignalDegradeThreshold }
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifOptical Fec objects (R21.0)."
|
|
::= { lumIfOpticalGroups 5 }
|
|
|
|
ifOpticalGeneralGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalGeneralConfigLastChangeTime,
|
|
ifOpticalGeneralStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalTransSectionTableSize,
|
|
ifOpticalGeneralIfOpticalTransSectionConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalTransSectionStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalChannelTableSize,
|
|
ifOpticalGeneralIfOpticalChannelConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalChannelStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateTableSize,
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalFecTableSize,
|
|
ifOpticalGeneralIfOpticalFecConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalFecStateLastChangeTime}
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The general objects."
|
|
::= { lumIfOpticalGroups 6 }
|
|
|
|
ifOpticalTransSectionGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalTransSectionIndex,
|
|
ifOpticalTransSectionName,
|
|
ifOpticalTransSectionConnIfBasicIfIndex,
|
|
ifOpticalTransSectionForwardAls,
|
|
ifOpticalTransSectionRxPowerLevel,
|
|
ifOpticalTransSectionRxPowerLevelLowRelativeThld,
|
|
ifOpticalTransSectionTxPowerLevel,
|
|
ifOpticalTransSectionLaserMode,
|
|
ifOpticalTransSectionLaserStatus,
|
|
ifOpticalTransSectionReceiverSensitivity,
|
|
ifOpticalTransSectionTxSignalStatus,
|
|
ifOpticalTransSectionRxSignalStatus,
|
|
ifOpticalTransSectionLossOfSignal,
|
|
ifOpticalTransSectionRxPowerLevelLow,
|
|
ifOpticalTransSectionRxPowerLevelHigh,
|
|
ifOpticalTransSectionRxExcessiveInputPower,
|
|
ifOpticalTransSectionTxPowerLow,
|
|
ifOpticalTransSectionRxPowerLevelLowAbsoluteThld }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifOptical transmission section objects (R21.0)."
|
|
::= { lumIfOpticalGroups 7 }
|
|
|
|
ifOpticalGeneralGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalGeneralConfigLastChangeTime,
|
|
ifOpticalGeneralStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalTransSectionTableSize,
|
|
ifOpticalGeneralIfOpticalTransSectionConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalTransSectionStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalChannelTableSize,
|
|
ifOpticalGeneralIfOpticalChannelConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalChannelStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateTableSize,
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalDigitalSignalRateStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalFecTableSize,
|
|
ifOpticalGeneralIfOpticalFecConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalFecStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierTableSize,
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierStateLastChangeTime,
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierGroupTableSize,
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierGrConfigLastChangeTime,
|
|
ifOpticalGeneralIfOpticalTransLaneCarrierGrStateLastChangeTime }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The general objects."
|
|
::= { lumIfOpticalGroups 8 }
|
|
|
|
ifOpticalTransLaneCarrierGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalTransLaneCarrierIndex,
|
|
ifOpticalTransLaneCarrierName,
|
|
ifOpticalTransLaneCarrierConnIfBasicIfIndex,
|
|
ifOpticalTransLaneCarrierConnIfOpticalTransLaneCarrierGrIndex,
|
|
ifOpticalTransLaneCarrierLaneId,
|
|
ifOpticalTransLaneCarrierTxSignalStatus,
|
|
ifOpticalTransLaneCarrierRxSignalStatus,
|
|
ifOpticalTransLaneCarrierRxPowerLevel,
|
|
ifOpticalTransLaneCarrierLossOfSignal,
|
|
ifOpticalTransLaneCarrierReceiverSensitivity,
|
|
ifOpticalTransLaneCarrierRxPowerLevelLow,
|
|
ifOpticalTransLaneCarrierTxFrequency,
|
|
ifOpticalTransLaneCarrierCounterSes,
|
|
ifOpticalTransLaneCarrierCounterSesReset }
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifOptical otlc objects (R22.0)."
|
|
::= { lumIfOpticalGroups 9 }
|
|
|
|
ifOpticalTransLaneCarrierGroupGroupV1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalTransLaneCarrierGroupIndex,
|
|
ifOpticalTransLaneCarrierGroupName,
|
|
ifOpticalTransLaneCarrierGroupConnIfBasicIfIndex,
|
|
ifOpticalTransLaneCarrierGroupForwardAls,
|
|
ifOpticalTransLaneCarrierGroupLaserStatus,
|
|
ifOpticalTransLaneCarrierGroupTxPowerLevel,
|
|
ifOpticalTransLaneCarrierGroupRxSignalStatus,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevel,
|
|
ifOpticalTransLaneCarrierGroupTxSignalStatus,
|
|
ifOpticalTransLaneCarrierGroupLossOfSignal,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevelLowRelativeThld,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevelLow,
|
|
ifOpticalTransLaneCarrierGroupTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupExpectedTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupUnexpectedTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupIllegalTxFrequency}
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifOptical otlcg objects (R22.0)."
|
|
::= { lumIfOpticalGroups 10 }
|
|
|
|
|
|
ifOpticalTransLaneCarrierGroupGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalTransLaneCarrierGroupIndex,
|
|
ifOpticalTransLaneCarrierGroupName,
|
|
ifOpticalTransLaneCarrierGroupConnIfBasicIfIndex,
|
|
ifOpticalTransLaneCarrierGroupForwardAls,
|
|
ifOpticalTransLaneCarrierGroupLaserStatus,
|
|
ifOpticalTransLaneCarrierGroupTxPowerLevel,
|
|
ifOpticalTransLaneCarrierGroupRxSignalStatus,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevel,
|
|
ifOpticalTransLaneCarrierGroupTxSignalStatus,
|
|
ifOpticalTransLaneCarrierGroupLossOfSignal,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevelLowRelativeThld,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevelLow,
|
|
ifOpticalTransLaneCarrierGroupTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupExpectedTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupUnexpectedTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupIllegalTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupCounterSesReset}
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifOptical otlcg objects (R23.0)."
|
|
::= { lumIfOpticalGroups 11 }
|
|
|
|
|
|
ifOpticalTransLaneCarrierGroupGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalTransLaneCarrierGroupIndex,
|
|
ifOpticalTransLaneCarrierGroupName,
|
|
ifOpticalTransLaneCarrierGroupConnIfBasicIfIndex,
|
|
ifOpticalTransLaneCarrierGroupForwardAls,
|
|
ifOpticalTransLaneCarrierGroupLaserStatus,
|
|
ifOpticalTransLaneCarrierGroupTxPowerLevel,
|
|
ifOpticalTransLaneCarrierGroupRxSignalStatus,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevel,
|
|
ifOpticalTransLaneCarrierGroupTxSignalStatus,
|
|
ifOpticalTransLaneCarrierGroupLossOfSignal,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevelLowRelativeThld,
|
|
ifOpticalTransLaneCarrierGroupRxPowerLevelLow,
|
|
ifOpticalTransLaneCarrierGroupTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupExpectedTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupUnexpectedTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupIllegalTxFrequency,
|
|
ifOpticalTransLaneCarrierGroupCounterSesReset,
|
|
ifOpticalTransLaneCarrierGroupMinimumLaneRxPowerLevel,
|
|
ifOpticalTransLaneCarrierGroupReceiverLaneSensitivity}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifOptical otlcg objects (R25.0)."
|
|
::= { lumIfOpticalGroups 12 }
|
|
|
|
ifOpticalTransSectionGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalTransSectionIndex,
|
|
ifOpticalTransSectionName,
|
|
ifOpticalTransSectionConnIfBasicIfIndex,
|
|
ifOpticalTransSectionForwardAls,
|
|
ifOpticalTransSectionRxPowerLevel,
|
|
ifOpticalTransSectionRxPowerLevelLowRelativeThld,
|
|
ifOpticalTransSectionTxPowerLevel,
|
|
ifOpticalTransSectionLaserMode,
|
|
ifOpticalTransSectionLaserStatus,
|
|
ifOpticalTransSectionReceiverSensitivity,
|
|
ifOpticalTransSectionTxSignalStatus,
|
|
ifOpticalTransSectionRxSignalStatus,
|
|
ifOpticalTransSectionLossOfSignal,
|
|
ifOpticalTransSectionRxPowerLevelLow,
|
|
ifOpticalTransSectionRxPowerLevelHigh,
|
|
ifOpticalTransSectionRxExcessiveInputPower,
|
|
ifOpticalTransSectionTxPowerLow,
|
|
ifOpticalTransSectionRxPowerLevelLowAbsoluteThld,
|
|
ifOpticalTransSectionLossThld}
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifOptical transmission section objects (R26.0)."
|
|
::= { lumIfOpticalGroups 13 }
|
|
|
|
ifOpticalChannelGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalChannelIndex,
|
|
ifOpticalChannelName,
|
|
ifOpticalChannelConnIfBasicIfIndex,
|
|
ifOpticalChannelTxFrequency,
|
|
ifOpticalChannelExpectedTxFrequency,
|
|
ifOpticalChannelTxSignalStatus,
|
|
ifOpticalChannelRxSignalStatus,
|
|
ifOpticalChannelIllegalTxFrequency,
|
|
ifOpticalChannelUnexpectedTxFrequency,
|
|
ifOpticalChannelNoTxFrequencySet,
|
|
ifOpticalChannelDispersionSearchLimit }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifOptical channel objects (R26.0)."
|
|
::= { lumIfOpticalGroups 14 }
|
|
|
|
ifOpticalFecGroupV2 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalFecIndex,
|
|
ifOpticalFecName,
|
|
ifOpticalFecConnIfBasicIfIndex,
|
|
ifOpticalFecType,
|
|
ifOpticalFecTxSignalStatus,
|
|
ifOpticalFecRxSignalStatus,
|
|
ifOpticalFecFailure,
|
|
ifOpticalFecSignalDegraded,
|
|
ifOpticalFecSignalDegradeThreshold,
|
|
ifOpticalFecTypeUnavailable,
|
|
ifOpticalFecUId}
|
|
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifOptical Fec objects (R26.0)."
|
|
::= { lumIfOpticalGroups 15 }
|
|
|
|
ifOpticalFecGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalFecIndex,
|
|
ifOpticalFecName,
|
|
ifOpticalFecConnIfBasicIfIndex,
|
|
ifOpticalFecType,
|
|
ifOpticalFecTxSignalStatus,
|
|
ifOpticalFecRxSignalStatus,
|
|
ifOpticalFecFailure,
|
|
ifOpticalFecSignalDegraded,
|
|
ifOpticalFecSignalDegradeThreshold,
|
|
ifOpticalFecTypeUnavailable,
|
|
ifOpticalFecUId,
|
|
ifOpticalFecDecModeMismatch}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifOptical Fec objects (R28.1)."
|
|
::= { lumIfOpticalGroups 16 }
|
|
|
|
ifOpticalChannelGroupV3 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalChannelIndex,
|
|
ifOpticalChannelName,
|
|
ifOpticalChannelConnIfBasicIfIndex,
|
|
ifOpticalChannelTxFrequency,
|
|
ifOpticalChannelExpectedTxFrequency,
|
|
ifOpticalChannelTxSignalStatus,
|
|
ifOpticalChannelRxSignalStatus,
|
|
ifOpticalChannelIllegalTxFrequency,
|
|
ifOpticalChannelUnexpectedTxFrequency,
|
|
ifOpticalChannelNoTxFrequencySet,
|
|
ifOpticalChannelDispersionSearchLimit,
|
|
ifOpticalChannelLaserNotTuned }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifOptical channel objects (R28.1)."
|
|
::= { lumIfOpticalGroups 17 }
|
|
|
|
ifOpticalTransSectionGroupV4 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalTransSectionIndex,
|
|
ifOpticalTransSectionName,
|
|
ifOpticalTransSectionConnIfBasicIfIndex,
|
|
ifOpticalTransSectionForwardAls,
|
|
ifOpticalTransSectionRxPowerLevel,
|
|
ifOpticalTransSectionRxPowerLevelLowRelativeThld,
|
|
ifOpticalTransSectionTxPowerLevel,
|
|
ifOpticalTransSectionLaserMode,
|
|
ifOpticalTransSectionLaserStatus,
|
|
ifOpticalTransSectionReceiverSensitivity,
|
|
ifOpticalTransSectionTxSignalStatus,
|
|
ifOpticalTransSectionRxSignalStatus,
|
|
ifOpticalTransSectionLossOfSignal,
|
|
ifOpticalTransSectionRxPowerLevelLow,
|
|
ifOpticalTransSectionRxPowerLevelHigh,
|
|
ifOpticalTransSectionRxExcessiveInputPower,
|
|
ifOpticalTransSectionTxPowerLow,
|
|
ifOpticalTransSectionRxPowerLevelLowAbsoluteThld,
|
|
ifOpticalTransSectionLossThld,
|
|
ifOpticalTransSectionLaserForcedOn}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifOptical transmission section objects (R28.1)."
|
|
::= { lumIfOpticalGroups 18 }
|
|
|
|
ifOpticalChannelGroupV4 OBJECT-GROUP
|
|
OBJECTS {
|
|
ifOpticalChannelIndex,
|
|
ifOpticalChannelName,
|
|
ifOpticalChannelConnIfBasicIfIndex,
|
|
ifOpticalChannelTxFrequency,
|
|
ifOpticalChannelExpectedTxFrequency,
|
|
ifOpticalChannelTxSignalStatus,
|
|
ifOpticalChannelRxSignalStatus,
|
|
ifOpticalChannelIllegalTxFrequency,
|
|
ifOpticalChannelUnexpectedTxFrequency,
|
|
ifOpticalChannelNoTxFrequencySet,
|
|
ifOpticalChannelDispersionSearchLimit,
|
|
ifOpticalChannelLaserNotTuned,
|
|
ifOpticalChannelLineCoding }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifOptical channel objects (R29.1)."
|
|
::= { lumIfOpticalGroups 19 }
|
|
|
|
-- ----------------------------------------------------
|
|
-- Compliance
|
|
-- ----------------------------------------------------
|
|
|
|
lumIfOpticalComplV1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifOptical MIB. (R20.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifOpticalGeneralGroupV1,
|
|
ifOpticalTransSectionGroupV1,
|
|
ifOpticalChannelGroupV1,
|
|
ifOpticalDigitalSignalRateGroupV1 }
|
|
::= { lumIfOpticalCompl 1 }
|
|
|
|
lumIfOpticalComplV2 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifOptical MIB v2. (R21.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifOpticalGeneralGroupV2,
|
|
ifOpticalTransSectionGroupV2,
|
|
ifOpticalChannelGroupV1,
|
|
ifOpticalDigitalSignalRateGroupV1,
|
|
ifOpticalFecGroupV1 }
|
|
::= { lumIfOpticalCompl 2 }
|
|
|
|
lumIfOpticalComplV3 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifOptical MIB v2. (R22.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifOpticalGeneralGroupV3,
|
|
ifOpticalTransSectionGroupV2,
|
|
ifOpticalChannelGroupV1,
|
|
ifOpticalDigitalSignalRateGroupV1,
|
|
ifOpticalFecGroupV1,
|
|
ifOpticalTransLaneCarrierGroupV1,
|
|
ifOpticalTransLaneCarrierGroupGroupV1 }
|
|
::= { lumIfOpticalCompl 3 }
|
|
|
|
lumIfOpticalComplV4 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifOptical MIB v2. (R23.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifOpticalGeneralGroupV3,
|
|
ifOpticalTransSectionGroupV2,
|
|
ifOpticalChannelGroupV1,
|
|
ifOpticalDigitalSignalRateGroupV1,
|
|
ifOpticalFecGroupV1,
|
|
ifOpticalTransLaneCarrierGroupV1,
|
|
ifOpticalTransLaneCarrierGroupGroupV2 }
|
|
::= { lumIfOpticalCompl 4 }
|
|
|
|
lumIfOpticalComplV5 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifOptical MIB v2. (R23.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifOpticalGeneralGroupV3,
|
|
ifOpticalTransSectionGroupV2,
|
|
ifOpticalChannelGroupV1,
|
|
ifOpticalDigitalSignalRateGroupV1,
|
|
ifOpticalFecGroupV1,
|
|
ifOpticalTransLaneCarrierGroupV1,
|
|
ifOpticalTransLaneCarrierGroupGroupV3 }
|
|
::= { lumIfOpticalCompl 5 }
|
|
|
|
lumIfOpticalComplV6 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifOptical MIB v2. (R26.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifOpticalGeneralGroupV3,
|
|
ifOpticalTransSectionGroupV3,
|
|
ifOpticalChannelGroupV1,
|
|
ifOpticalDigitalSignalRateGroupV1,
|
|
ifOpticalFecGroupV1,
|
|
ifOpticalTransLaneCarrierGroupV1,
|
|
ifOpticalTransLaneCarrierGroupGroupV3 }
|
|
::= { lumIfOpticalCompl 6 }
|
|
|
|
lumIfOpticalComplV7 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifOptical MIB v2. (R26.0)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifOpticalGeneralGroupV3,
|
|
ifOpticalTransSectionGroupV3,
|
|
ifOpticalChannelGroupV1,
|
|
ifOpticalDigitalSignalRateGroupV1,
|
|
ifOpticalFecGroupV2,
|
|
ifOpticalTransLaneCarrierGroupV1,
|
|
ifOpticalTransLaneCarrierGroupGroupV3 }
|
|
::= { lumIfOpticalCompl 7 }
|
|
|
|
lumIfOpticalComplV8 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifOptical MIB v2. (R28.1)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifOpticalGeneralGroupV3,
|
|
ifOpticalTransSectionGroupV4,
|
|
ifOpticalChannelGroupV1,
|
|
ifOpticalDigitalSignalRateGroupV1,
|
|
ifOpticalFecGroupV3,
|
|
ifOpticalTransLaneCarrierGroupV1,
|
|
ifOpticalTransLaneCarrierGroupGroupV3 }
|
|
::= { lumIfOpticalCompl 8 }
|
|
|
|
lumIfOpticalComplV9 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifOptical MIB v2. (R29.1)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifOpticalGeneralGroupV3,
|
|
ifOpticalTransSectionGroupV4,
|
|
ifOpticalChannelGroupV4,
|
|
ifOpticalDigitalSignalRateGroupV1,
|
|
ifOpticalFecGroupV3,
|
|
ifOpticalTransLaneCarrierGroupV1,
|
|
ifOpticalTransLaneCarrierGroupGroupV3 }
|
|
::= { lumIfOpticalCompl 9 }
|
|
|
|
lumIfOpticalComplV10 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Basic implementation requirements for the ifOptical MIB v2. (R30.1)"
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ifOpticalGeneralGroupV3,
|
|
ifOpticalTransSectionGroupV4,
|
|
ifOpticalChannelGroupV4,
|
|
ifOpticalDigitalSignalRateGroupV1,
|
|
ifOpticalFecGroupV3,
|
|
ifOpticalTransLaneCarrierGroupV1,
|
|
ifOpticalTransLaneCarrierGroupGroupV3 }
|
|
::= { lumIfOpticalCompl 10 }
|
|
|
|
END
|
|
|