1265 lines
52 KiB
Plaintext
1265 lines
52 KiB
Plaintext
--===========================================================
|
|
-- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
|
|
-- Description: This MIB is excerpted from the draft-ietf-hubmib-efm-epon-mib-02 directly
|
|
--- only changed the object name,added the hpnicf as prefix.
|
|
-- Reference:
|
|
-- Version: V1.0
|
|
-- History:
|
|
-- V1.0 created by liyue.
|
|
-- Define MODULE-IDENTITY for hpnicfDot3EfmeponMIB
|
|
--=================================================================
|
|
HPN-ICF-DOT3-EFM-EPON-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
hpnicfEpon
|
|
FROM HPN-ICF-OID-MIB
|
|
MODULE-IDENTITY, mib-2, OBJECT-TYPE, Counter32,
|
|
Integer32, OBJECT-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
TruthValue, MacAddress
|
|
FROM SNMPv2-TC
|
|
ifIndex
|
|
FROM IF-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF;
|
|
|
|
hpnicfDot3EfmeponMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200409210000Z" -- September 21, 2004
|
|
ORGANIZATION
|
|
""
|
|
CONTACT-INFO
|
|
""
|
|
DESCRIPTION
|
|
"The objects in this MIB module are used to manage the
|
|
Ethernet in the First Mile (EFM) Multi Point Control
|
|
Protocol (MPCP) Interfaces as defined in IEEE Draft
|
|
P802.3ah/D3.0 clause 64,65.
|
|
The following reference is used throughout this MIB module:
|
|
[802.3ah] refers to:
|
|
IEEE Draft P802.3ah/D3.3: 'Draft amendment to -
|
|
Information technology - Telecommunications and
|
|
information exchange between systems - Local and
|
|
metropolitan area networks - Specific requirements -
|
|
Part 3: Carrier sense multiple access with collision
|
|
detection (CSMA/CD) access method and physical layer
|
|
specifications - Media Access Control Parameters,
|
|
Physical Layers and Management Parameters for
|
|
subscriber access networks', 22 April 2004.
|
|
|
|
Of particular interest are Clause 64(MPCP) 65(P2MP RS) and
|
|
60 (PON PMDs). Clause 30, 'Management', and Clause 45,
|
|
'Management Data Input/Output (MDIO) Interface'.
|
|
|
|
Copyright (C) The Internet Society (2004). This version
|
|
of this MIB module is part of XXXX see the RFC itself for
|
|
full legal notices."
|
|
|
|
-- Editor's Note: Replace XXXX with the actual RFC number
|
|
-- assigned by RFC Editor and remove this note
|
|
|
|
REVISION "200409210000Z" -- September 21, 2004
|
|
DESCRIPTION "Initial version, published as RFC XXXX."
|
|
|
|
::= { hpnicfEpon 2 }
|
|
|
|
-- Editor's Note: Replace XXX with a real OID once it is
|
|
-- assigned by IANA and remove this note.
|
|
|
|
|
|
-- Editor-s note: MPCP MIB modules definitions ([802.3ah]
|
|
--- clause 30.3.5)
|
|
-- Editor-s note: Description in attributes with References should be
|
|
-- minimized in later versions
|
|
|
|
hpnicfDot3MpcpMIB OBJECT IDENTIFIER ::= { hpnicfDot3EfmeponMIB 1 }
|
|
|
|
hpnicfDot3MpcpObjects OBJECT IDENTIFIER ::= { hpnicfDot3MpcpMIB 1 }
|
|
|
|
hpnicfDot3MpcpConformance OBJECT IDENTIFIER ::= { hpnicfDot3MpcpMIB 2 }
|
|
|
|
hpnicfDot3MpcpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot3MpcpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table for dot3 Multi-Point Control Protocol (MPCP)
|
|
MIB modules."
|
|
::= { hpnicfDot3MpcpObjects 1 }
|
|
|
|
hpnicfDot3MpcpEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot3MpcpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the dot3 MPCP MIB modules table."
|
|
INDEX { ifIndex }
|
|
::= { hpnicfDot3MpcpTable 1 }
|
|
|
|
HpnicfDot3MpcpEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot3MpcpID Integer32,
|
|
hpnicfDot3MpcpOperStatus TruthValue,
|
|
hpnicfDot3MpcpMode INTEGER,
|
|
hpnicfDot3MpcpLinkID Integer32,
|
|
hpnicfDot3MpcpRemoteMACAddress MacAddress,
|
|
hpnicfDot3MpcpRegistrationState INTEGER,
|
|
hpnicfDot3MpcpTransmitElapsed Integer32,
|
|
hpnicfDot3MpcpReceiveElapsed Integer32,
|
|
hpnicfDot3MpcpRoundTripTime Integer32,
|
|
hpnicfDot3MpcpMaximumPendingGrants Integer32,
|
|
hpnicfDot3MpcpAdminState TruthValue,
|
|
hpnicfDot3MpcpOnTime Integer32,
|
|
hpnicfDot3MpcpOffTime Integer32,
|
|
hpnicfDot3MpcpSyncTime Integer32
|
|
}
|
|
|
|
hpnicfDot3MpcpID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is assigned so as to uniquely identify the
|
|
Multi-Point MAC Control (MPCP) entity, as defined in
|
|
[802.3ah] clause 64, among the subordinate managed
|
|
objects of the containing object.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.1.1."
|
|
::= { hpnicfDot3MpcpEntry 1 }
|
|
|
|
|
|
hpnicfDot3MpcpOperStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable can be used to define the operational
|
|
state of the Multi-Point MAC Control sublayer as
|
|
defined in [802.3ah] clause 64. Selecting admin for an
|
|
interface with Multi-Point MAC Control sublayer. When
|
|
the attribute is True the the interface will act as if
|
|
Multi-point control protocol is enabled. When the
|
|
attribute is False the interface will act as if it does
|
|
not have the Multi-point control protocol. The
|
|
operational state can be changed using the
|
|
hpnicfDot3MpcpAdminState attribute.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.1.2."
|
|
::= { hpnicfDot3MpcpEntry 2 }
|
|
|
|
hpnicfDot3MpcpMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
olt(1),
|
|
onu(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable can be used to identify the operational
|
|
state of the Multi-Point MAC Control sublayer as
|
|
defined in [802.3ah] clause 64. Selecting olt(1) for an
|
|
OLT (server) mode and onu(2) for an ONU (client) mode.
|
|
Writing can be done during only during initialization,
|
|
when hpnicfDot3MpcpOperStatus indicates Flase.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.1.3."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot3MpcpEntry 3 }
|
|
|
|
hpnicfDot3MpcpLinkID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that identifies the Logical Link
|
|
identity (LLID) associated with the MAC port as
|
|
specified in [802.3ah] clause 65.1.3.2.2.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.1.4."
|
|
::= { hpnicfDot3MpcpEntry 4 }
|
|
|
|
hpnicfDot3MpcpRemoteMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that identifies the source_address
|
|
parameter of the last MPCPDUs passed to the MAC Control.
|
|
This value is updated on reception of a valid frame with
|
|
(1) a destination Field equal to the reserved multicast
|
|
address for MAC Control specified in [802.3ah] Annex
|
|
31A, (2) lengthOrType field value equal to the reserved
|
|
Type for MAC Control as specified in [802.3ah] Annex
|
|
31A. (3) an MPCP subtype value equal to the subtype
|
|
reserved for MPCP as specified in [802.3ah] Annex 31A.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.1.5."
|
|
::= { hpnicfDot3MpcpEntry 5 }
|
|
|
|
hpnicfDot3MpcpRegistrationState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unregistered(1),
|
|
registering(2),
|
|
registered(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that identifies the operational state
|
|
of the Multi-Point MAC Control sublayer as defined in
|
|
[802.3ah] clause 64. When this attribute has the
|
|
enumeration unregistered(1) the interface may be used
|
|
for registering a link partner. When this attribute has
|
|
the enumeration registering(2) the interface is in the
|
|
process of registering a link-partner. When this
|
|
attribute has the enumeration registered(3) the
|
|
interface has an established link-partner.
|
|
This attribute is relevant for an OLT and an ONU. For
|
|
the OLT it provides an indication per LLID."
|
|
REFERENCE "[802.3ah], 30.3.5.1.6."
|
|
::= { hpnicfDot3MpcpEntry 6 }
|
|
|
|
hpnicfDot3MpcpTransmitElapsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "TQ (16nsec)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that reports the interval from last
|
|
MPCP frame transmission in increments of Time Quanta
|
|
(TQ) 16ns. The value returned shall be (interval from
|
|
last MPCP frame transmission in ns)/16. If this value
|
|
exceeds (2^32-1) the value (2^32-1) shall be returned.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.1.19."
|
|
::= { hpnicfDot3MpcpEntry 7 }
|
|
|
|
hpnicfDot3MpcpReceiveElapsed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "TQ (16nsec)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that reports the interval from last
|
|
MPCP frame reception in increments of Time Quanta (TQ)
|
|
16ns. The value returned shall be (interval from last
|
|
MPCP last MPCP frame reception in ns)/16. If this value
|
|
exceeds (2^32-1) the value (2^32-1) shall be returned.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.1.20."
|
|
::= { hpnicfDot3MpcpEntry 8 }
|
|
|
|
hpnicfDot3MpcpRoundTripTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "TQ (16nsec)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that reports the MPCP round trip time
|
|
in increments of Time Quanta (TQ) 16ns. The value
|
|
returned shall be (round trip time in ns)/16. If this
|
|
value exceeds (2^16-1) the value (2^16-1) shall be
|
|
returned. This attribute is relevant for an OLT and an
|
|
ONU. For the OLT there is a value per LLID"
|
|
REFERENCE "[802.3ah], 30.3.5.1.21."
|
|
::= { hpnicfDot3MpcpEntry 9 }
|
|
|
|
hpnicfDot3MpcpMaximumPendingGrants OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that indicates the maximum number of
|
|
grants an ONU can store. The maximum number of grants an
|
|
ONU can store has a range of 0 to 255.
|
|
This attribute is relevant for an OLT and an ONU. For
|
|
the OLT there is a value per LLID"
|
|
REFERENCE "[802.3ah], 30.3.5.1.24."
|
|
::= { hpnicfDot3MpcpEntry 10 }
|
|
|
|
hpnicfDot3MpcpAdminState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable can be used to define the operational
|
|
state of the Multi-Point MAC Control sublayer as defined
|
|
in [802.3ah] clause 64. Selecting admin for an interface
|
|
with Multi-Point MAC Control sublayer. When selecting
|
|
the value as True the interface Multi-Point control
|
|
protocol is enabled. When selecting the value as False
|
|
the interface acts as if the Multi-point Control
|
|
protocol does not exist. Reading reflects the state of
|
|
the attribute and the operation of the Multi-point
|
|
control protocol mode of the interface.
|
|
Writing can be done all the time.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.2.1."
|
|
DEFVAL { false }
|
|
::= { hpnicfDot3MpcpEntry 11 }
|
|
|
|
|
|
hpnicfDot3MpcpOnTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "TQ (16nsec)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that reports the -on time- for a grant
|
|
burst in increments of Time Quanta (TQ) 16ns as defined
|
|
in [802.3ah] 60,64. The value returned shall be (on time
|
|
ns)/16. If this value exceeds (2^32-1) the value
|
|
(2^32-1) shall be returned.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 64.3.5.1."
|
|
::= { hpnicfDot3MpcpEntry 12 }
|
|
|
|
hpnicfDot3MpcpOffTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "TQ (16nsec)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that reports the -off time- for a
|
|
grant burst in increments of Time Quanta (TQ) 16ns as
|
|
defined in [802.3ah] 60,64. The value returned shall be
|
|
(off time ns)/16. If this value exceeds (2^32-1) the
|
|
value (2^32-1) shall be returned.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 64.3.5.1."
|
|
::= { hpnicfDot3MpcpEntry 13 }
|
|
|
|
hpnicfDot3MpcpSyncTime OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "TQ (16nsec)"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that reports the -sync lock time- for
|
|
an OLT receiver in increments of Time Quanta (TQ) 16ns
|
|
as defined in [802.3ah] 60,64,65. The value returned
|
|
shall be (sync lock time ns)/16. If this value exceeds
|
|
(2^32-1) the value (2^32-1) shall be returned.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 64.3.3.2."
|
|
::= { hpnicfDot3MpcpEntry 14 }
|
|
|
|
|
|
|
|
hpnicfDot3MpcpStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot3MpcpStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines the list of statistics counters of
|
|
[802.3ah] clause 64 MPCP interface."
|
|
::= { hpnicfDot3MpcpObjects 2 }
|
|
|
|
hpnicfDot3MpcpStatEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot3MpcpStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entries for table of statistics counters of
|
|
[802.3ah] clause 64 MPCP interface."
|
|
INDEX { ifIndex }
|
|
::= { hpnicfDot3MpcpStatTable 1 }
|
|
|
|
HpnicfDot3MpcpStatEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot3MpcpMACCtrlFramesTransmitted Counter32,
|
|
hpnicfDot3MpcpMACCtrlFramesReceived Counter32,
|
|
hpnicfDot3MpcpDiscoveryWindowsSent Counter32,
|
|
hpnicfDot3MpcpDiscoveryTimeout Counter32,
|
|
hpnicfDot3MpcpTxRegRequest Counter32,
|
|
hpnicfDot3MpcpRxRegRequest Counter32,
|
|
hpnicfDot3MpcpTxRegAck Counter32,
|
|
hpnicfDot3MpcpRxRegAck Counter32,
|
|
hpnicfDot3MpcpTxReport Counter32,
|
|
hpnicfDot3MpcpRxReport Counter32,
|
|
hpnicfDot3MpcpTxGate Counter32,
|
|
hpnicfDot3MpcpRxGate Counter32,
|
|
hpnicfDot3MpcpTxRegister Counter32,
|
|
hpnicfDot3MpcpRxRegister Counter32,
|
|
hpnicfDot3MpcpRxNotSupportedMPCP Counter32
|
|
}
|
|
|
|
hpnicfDot3MpcpMACCtrlFramesTransmitted OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of MPCP frames passed to the MAC sublayer for
|
|
transmission. This counter is incremented when a
|
|
MA_CONTROL.request service primitive is generated within
|
|
the MAC control sublayer with an opcode indicating a
|
|
MPCP frame.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.1.7."
|
|
::= { hpnicfDot3MpcpStatEntry 1 }
|
|
|
|
hpnicfDot3MpcpMACCtrlFramesReceived OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of MPCP frames passed by the MAC sublayer to the
|
|
MAC Control sublayer. This counter is incremented when a
|
|
ReceiveFrame function call returns a valid frame with:
|
|
(1) a lengthOrType field value equal to the reserved
|
|
Type for 802.3_MAC_Control as specified in 31.4.1.3, and
|
|
(2) an opcode indicating a MPCP frame.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.1.8."
|
|
::= { hpnicfDot3MpcpStatEntry 2 }
|
|
|
|
hpnicfDot3MpcpDiscoveryWindowsSent OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of discovery windows generated. The counter is
|
|
incremented by one for each generated discovery window.
|
|
This attribute is relevant for an OLT and an ONU. At the
|
|
ONU value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.22."
|
|
::= { hpnicfDot3MpcpStatEntry 3 }
|
|
|
|
hpnicfDot3MpcpDiscoveryTimeout OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a discovery timeout
|
|
occurs. Increment the counter by one for each discovery
|
|
processing state-machine reset resulting from timeout
|
|
waiting for message arrival.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.5.1.23."
|
|
::= { hpnicfDot3MpcpStatEntry 4 }
|
|
|
|
|
|
hpnicfDot3MpcpTxRegRequest OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a REGISTER_REQ MPCP
|
|
frames transmission occurs. Increment the counter by one
|
|
for each REGISTER_REQ MPCP frame transmitted as defined
|
|
in [802.3ah] clause 64. This counter is mandatory for an
|
|
ONU. This attribute is relevant for an OLT and an ONU.
|
|
At the OLT value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.12."
|
|
::= { hpnicfDot3MpcpStatEntry 5 }
|
|
|
|
hpnicfDot3MpcpRxRegRequest OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a REGISTER_REQ MPCP
|
|
frames reception occurs. A single counter at the ONU and
|
|
a set of counters, one for each LLID, at the OLT.
|
|
Increment the counter by one for each REGISTER_REQ MPCP
|
|
frame received for each LLID as defined in [802.3ah]
|
|
clause 64. This counter is mandatory for an ONU and for
|
|
an OLT. At the ONU value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.17."
|
|
::= { hpnicfDot3MpcpStatEntry 6 }
|
|
|
|
hpnicfDot3MpcpTxRegAck OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a REGISTER_ACK MPCP
|
|
frames transmission occurs. Increment the counter by one
|
|
for each REGISTER_ACK MPCP frame transmitted as defined
|
|
in [802.3ah] clause 64. This counter is mandatory for an
|
|
ONU. This attribute is relevant for an OLT and an ONU.
|
|
At the OLT the value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.10."
|
|
::= { hpnicfDot3MpcpStatEntry 7 }
|
|
|
|
hpnicfDot3MpcpRxRegAck OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a REGISTER_ACK MPCP
|
|
frames reception occurs. A single counter at the ONU and
|
|
a set of counters, one for each LLID, at the OLT.
|
|
Increment the counter by one for each REGISTER_ACK MPCP
|
|
frame received for each LLID, as defined in [802.3ah]
|
|
clause 64. This counter is mandatory for an ONU and for
|
|
an OLT. At the ONU the value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.15."
|
|
::= { hpnicfDot3MpcpStatEntry 8 }
|
|
|
|
hpnicfDot3MpcpTxReport OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a REPORT MPCP frames
|
|
transmission occurs. Increment the counter by one for
|
|
each REPORT MPCP frame transmitted as defined in
|
|
[802.3ah] clause 64. This counter is mandatory for an
|
|
ONU. This attribute is relevant for an OLT and an ONU.
|
|
At the OLT value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.13."
|
|
::= { hpnicfDot3MpcpStatEntry 9 }
|
|
|
|
hpnicfDot3MpcpRxReport OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a REPORT MPCP frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID, at the OLT. Increment
|
|
the counter by one for each REPORT MPCP frame received
|
|
for each LLID, as defined in [802.3ah] clause 64.
|
|
This counter is mandatory for an ONU and for an OLT.
|
|
At the ONU value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.18."
|
|
::= { hpnicfDot3MpcpStatEntry 10 }
|
|
|
|
hpnicfDot3MpcpTxGate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a GATE MPCP frames
|
|
transmission occurs. A set of counters, one for each
|
|
LLID, at the OLT. Increment the counter by one for each
|
|
GATE MPCP frame transmitted, for each LLID, as defined
|
|
in [802.3ah] clause 64. This counter is mandatory for an
|
|
OLT. This attribute is relevant for an OLT and an ONU.
|
|
At the ONU the value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.9."
|
|
::= { hpnicfDot3MpcpStatEntry 11 }
|
|
|
|
hpnicfDot3MpcpRxGate OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a GATE MPCP frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID ,at the OLT. Increment
|
|
the counter by one for each GATE MPCP frame received,
|
|
for each LLID, as defined in [802.3ah] clause 64. This
|
|
counter is mandatory for an ONU and for an OLT. At the
|
|
OLT the value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.14."
|
|
::= { hpnicfDot3MpcpStatEntry 12 }
|
|
|
|
hpnicfDot3MpcpTxRegister OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a REGISTER MPCP frames
|
|
transmission occurs. A set of counters, one for each
|
|
LLID, at the OLT. Increment the counter by one for each
|
|
REGISTER MPCP frame transmitted, for each LLID, as
|
|
defined in [802.3ah] clause 64. This counter is
|
|
mandatory for an OLT. This attribute is relevant for an
|
|
OLT and an ONU. At the ONU the value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.11."
|
|
::= { hpnicfDot3MpcpStatEntry 13 }
|
|
|
|
hpnicfDot3MpcpRxRegister OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a REGISTER MPCP frames
|
|
reception occurs. A single counter at the ONU and a set
|
|
of counters, one for each LLID, at the OLT. Increment
|
|
the counter by one for each REGISTER MPCP frame
|
|
received, for each LLID, as defined in [802.3ah] clause
|
|
64. This counter is mandatory for an ONU and for an OLT.
|
|
at the OLT the value should be zero."
|
|
REFERENCE "[802.3ah], 30.3.5.1.16."
|
|
::= { hpnicfDot3MpcpStatEntry 14 }
|
|
|
|
hpnicfDot3MpcpRxNotSupportedMPCP OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of the number of times a non-supported MPCP
|
|
frames reception occurs. A single counter at the ONU and
|
|
a set of counters, one for each LLID, at the OLT.
|
|
Increment the counter by one for each non-supported MPCP
|
|
frame received, for each LLID, as defined in [802.3ah]
|
|
clause 64. This counter is mandatory for an ONU and for
|
|
an OLT."
|
|
::= { hpnicfDot3MpcpStatEntry 15 }
|
|
|
|
|
|
|
|
|
|
-- Conformance Statements
|
|
|
|
-- Conformance Groups
|
|
|
|
hpnicfDot3MpcpGroups OBJECT IDENTIFIER ::= { hpnicfDot3MpcpConformance 1 }
|
|
|
|
hpnicfDot3MpcpGroupBase OBJECT-GROUP
|
|
OBJECTS {
|
|
hpnicfDot3MpcpID,
|
|
hpnicfDot3MpcpOperStatus,
|
|
hpnicfDot3MpcpMode,
|
|
hpnicfDot3MpcpLinkID,
|
|
hpnicfDot3MpcpRemoteMACAddress,
|
|
hpnicfDot3MpcpRegistrationState,
|
|
hpnicfDot3MpcpMaximumPendingGrants,
|
|
hpnicfDot3MpcpAdminState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of dot3 Mpcp Basic entity state
|
|
definition."
|
|
::= { hpnicfDot3MpcpGroups 1 }
|
|
|
|
hpnicfDot3MpcpGroupParam OBJECT-GROUP
|
|
OBJECTS {
|
|
hpnicfDot3MpcpTransmitElapsed,
|
|
hpnicfDot3MpcpReceiveElapsed,
|
|
hpnicfDot3MpcpRoundTripTime,
|
|
hpnicfDot3MpcpOnTime,
|
|
hpnicfDot3MpcpOffTime,
|
|
hpnicfDot3MpcpSyncTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of dot3 Mpcp for P2MP
|
|
parameters."
|
|
::= { hpnicfDot3MpcpGroups 2 }
|
|
|
|
hpnicfDot3MpcpGroupStat OBJECT-GROUP
|
|
OBJECTS {
|
|
hpnicfDot3MpcpMACCtrlFramesTransmitted,
|
|
hpnicfDot3MpcpMACCtrlFramesReceived,
|
|
hpnicfDot3MpcpDiscoveryWindowsSent,
|
|
hpnicfDot3MpcpDiscoveryTimeout ,
|
|
hpnicfDot3MpcpTxRegRequest,
|
|
hpnicfDot3MpcpRxRegRequest,
|
|
hpnicfDot3MpcpTxRegAck,
|
|
hpnicfDot3MpcpRxRegAck,
|
|
hpnicfDot3MpcpTxReport,
|
|
hpnicfDot3MpcpRxReport,
|
|
hpnicfDot3MpcpTxGate,
|
|
hpnicfDot3MpcpRxGate,
|
|
hpnicfDot3MpcpTxRegister,
|
|
hpnicfDot3MpcpRxRegister,
|
|
hpnicfDot3MpcpRxNotSupportedMPCP
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of dot3 Mpcp Statistics"
|
|
::= { hpnicfDot3MpcpGroups 3 }
|
|
|
|
|
|
-- Compliance
|
|
|
|
hpnicfDot3MpcpCompliances OBJECT IDENTIFIER ::= { hpnicfDot3MpcpConformance 2 }
|
|
|
|
hpnicfDot3MpcpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for Multi-point
|
|
control protocol interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hpnicfDot3MpcpGroupBase }
|
|
|
|
GROUP hpnicfDot3MpcpGroupParam
|
|
DESCRIPTION "This group is mandatory for all MPCP supporting
|
|
interfaces for configuration of the Multipoint
|
|
Parameters."
|
|
GROUP hpnicfDot3MpcpGroupStat
|
|
DESCRIPTION "This group is mandatory for all MPCP supporting
|
|
interfaces for Statistics collection."
|
|
::= { hpnicfDot3MpcpCompliances 1 }
|
|
|
|
|
|
-- Editor-s note: OMPEmulation managed object definitions
|
|
|
|
|
|
hpnicfDot3OmpEmulationMIB OBJECT IDENTIFIER ::= { hpnicfDot3EfmeponMIB 2 }
|
|
|
|
hpnicfDot3OmpEmulationObjects OBJECT IDENTIFIER ::= { hpnicfDot3OmpEmulationMIB 1 }
|
|
|
|
hpnicfDot3OmpeConformance OBJECT IDENTIFIER ::= { hpnicfDot3OmpEmulationMIB 2 }
|
|
|
|
|
|
hpnicfDot3OmpEmulationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot3OmpEmulationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table for dot3 OmpEmulation MIB modules."
|
|
::= { hpnicfDot3OmpEmulationObjects 1 }
|
|
|
|
hpnicfDot3OmpEmulationEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot3OmpEmulationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the dot3 OmpEmulation MIB modules table."
|
|
INDEX { ifIndex }
|
|
::= { hpnicfDot3OmpEmulationTable 1 }
|
|
|
|
HpnicfDot3OmpEmulationEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot3OmpEmulationID Integer32,
|
|
hpnicfDot3OmpEmulationType INTEGER
|
|
}
|
|
|
|
hpnicfDot3OmpEmulationID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of hpnicfDot3OmpEmulationID is assigned so as to
|
|
uniquely identify a OMPEmulation entity among the
|
|
subordinate managed objects of the containing object.
|
|
The value is mandated for an ONU."
|
|
REFERENCE "[802.3ah], 30.3.7.1.1."
|
|
::= { hpnicfDot3OmpEmulationEntry 1 }
|
|
|
|
hpnicfDot3OmpEmulationType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
olt(2),
|
|
onu(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that indicates that mode of operation
|
|
of the Reconciliation Sublayer for Point to Point
|
|
Emulation (see [802.3ah] clause 65.1). unknown(1) value
|
|
is assigned in initializing, true state or type not yet
|
|
known. olt(2) value is assigned when Sublayer operating
|
|
in OLT mode. onu(3) value is assigned when Sublayer
|
|
operating in ONU mode."
|
|
REFERENCE "[802.3ah], 30.3.7.1.2."
|
|
::= { hpnicfDot3OmpEmulationEntry 2 }
|
|
|
|
hpnicfDot3OmpEmulationStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot3OmpEmulationStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table defines the list of statistics counters of
|
|
[802.3ah] clause 65 OMP interface."
|
|
::= { hpnicfDot3OmpEmulationObjects 2 }
|
|
|
|
hpnicfDot3OmpEmulationStatEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot3OmpEmulationStatEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table entries for Table of statistics counters of
|
|
[802.3ah] clause 65 OMP interface."
|
|
INDEX { ifIndex }
|
|
::= { hpnicfDot3OmpEmulationStatTable 1 }
|
|
|
|
HpnicfDot3OmpEmulationStatEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot3OmpEmulationSLDErrors Counter32,
|
|
hpnicfDot3OmpEmulationCRC8Errors Counter32,
|
|
hpnicfDot3OmpEmulationBadLLID Counter32,
|
|
hpnicfDot3OmpEmulationGoodLLID Counter32,
|
|
hpnicfDot3OmpEmulationOnuPonCastLLID Counter32,
|
|
hpnicfDot3OmpEmulationOltPonCastLLID Counter32,
|
|
hpnicfDot3OmpEmulationBroadcastLLIDNotOnuID Counter32,
|
|
hpnicfDot3OmpEmulationOnuLLIDNotBroadcast Counter32,
|
|
hpnicfDot3OmpEmulationBroadcastLLIDPlusOnuId Counter32,
|
|
hpnicfDot3OmpEmulationNotBroadcastLLIDNotOnuId Counter32
|
|
}
|
|
|
|
hpnicfDot3OmpEmulationSLDErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received that do not contain a valid
|
|
SLD field as defined in [802.3ah] clause 65.1.3.3.1.
|
|
This attribute is mandatory for an OLT and optional for
|
|
an ONU."
|
|
REFERENCE "[802.3ah], 30.3.7.1.3."
|
|
::= { hpnicfDot3OmpEmulationStatEntry 1 }
|
|
|
|
hpnicfDot3OmpEmulationCRC8Errors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received that contain a valid SLD
|
|
field, as defined in [802.3ah] clause 65.1.3.3.1, but do
|
|
not pass the CRC-8 check as defined in [802.3ah] clause
|
|
65.1.3.3.3. This attribute is mandatory for an OLT and
|
|
for an ONU."
|
|
REFERENCE "[802.3ah], 30.3.7.1.4."
|
|
::= { hpnicfDot3OmpEmulationStatEntry 2 }
|
|
|
|
|
|
hpnicfDot3OmpEmulationBadLLID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received that contain a valid SLD
|
|
field, as defined in [802.3ah] clause 65.1.3.3.1, and
|
|
pass the CRC-8 check, as defined in [802.3ah] clause
|
|
65.1.3.3.3, but are discarded due to the LLID check as
|
|
defined in [802.3ah] clause 65.1.3.3.2.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.7.1.8."
|
|
::= { hpnicfDot3OmpEmulationStatEntry 3 }
|
|
|
|
hpnicfDot3OmpEmulationGoodLLID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received that contain a valid SLD
|
|
field, as defined in [802.3ah] clause 65.1.3.3.1, and
|
|
pass the CRC-8 check, as defined in [802.3ah] clause
|
|
65.1.3.3.3.
|
|
This attribute is relevant for an OLT and an ONU."
|
|
REFERENCE "[802.3ah], 30.3.7.1.5."
|
|
::= { hpnicfDot3OmpEmulationStatEntry 4 }
|
|
|
|
|
|
hpnicfDot3OmpEmulationOnuPonCastLLID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received that contain a valid SLD
|
|
field in an ONU, as defined in [802.3ah] 65.1.3.3.1,
|
|
passes the CRC-8 check, as defined in [802.3ah]
|
|
65.1.3.3.3, and the frame meets the rule for acceptance
|
|
defined in [802.3ah] 65.1.3.3.2."
|
|
REFERENCE "[802.3ah], 30.3.7.1.6."
|
|
::= { hpnicfDot3OmpEmulationStatEntry 5 }
|
|
|
|
hpnicfDot3OmpEmulationOltPonCastLLID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received that contain a valid SLD
|
|
field in an OLT, as defined in [802.3ah] 65.1.3.3.1,
|
|
passes the CRC-8 check, as defined in [802.3ah]
|
|
65.1.3.3.3, and the frame meets the rule for acceptance
|
|
defined in [802.3ah] 65.1.3.3.2."
|
|
REFERENCE "[802.3ah], 30.3.7.1.7."
|
|
::= { hpnicfDot3OmpEmulationStatEntry 6 }
|
|
|
|
hpnicfDot3OmpEmulationBroadcastLLIDNotOnuID OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received that contain a valid SLD
|
|
field in a OLT, as defined in [802.3ah] clause
|
|
65.1.3.3.1, and pass the CRC-8 check, as defined in
|
|
[802.3ah] clause 65.1.3.3.3, and contain broadcast LLID
|
|
as defined in [802.3ah] clause 65.
|
|
This attribute is mandatory for an OLT and for an ONU."
|
|
::= { hpnicfDot3OmpEmulationStatEntry 7 }
|
|
|
|
hpnicfDot3OmpEmulationOnuLLIDNotBroadcast OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received that contain a valid SLD
|
|
field in a OLT, as defined in [802.3ah] clause
|
|
65.1.3.3.1, and pass the CRC-8 check, as defined in
|
|
[802.3ah] clause 65.1.3.3.3, and contain the ONU's LLID
|
|
as defined in [802.3ah] clause 65. This attribute is
|
|
mandatory for an ONU and mandatory for an OLT (a
|
|
counter per LLID)."
|
|
::= { hpnicfDot3OmpEmulationStatEntry 8 }
|
|
|
|
hpnicfDot3OmpEmulationBroadcastLLIDPlusOnuId OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received that contain a valid SLD
|
|
field in a OLT, as defined in [802.3ah] clause
|
|
65.1.3.3.1, and pass the CRC-8 check, as defined in
|
|
[802.3ah] clause 65.1.3.3.3, and contain the broadcast
|
|
LLID plus ONU's LLID (frame reflected) as defined in
|
|
[802.3ah] clause 65. This attribute is mandatory for an
|
|
ONU and mandatory for an OLT (a counter per LLID)."
|
|
::= { hpnicfDot3OmpEmulationStatEntry 9 }
|
|
|
|
hpnicfDot3OmpEmulationNotBroadcastLLIDNotOnuId OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A count of frames received that contain a valid SLD
|
|
field in a OLT, as defined in [802.3ah] clause
|
|
65.1.3.3.1, and pass the CRC-8 check, as defined in
|
|
[802.3ah] clause 65.1.3.3.3, and does not contain the
|
|
ONU's LLID as defined in [802.3ah] clause 65. This
|
|
attribute is mandatory for an ONU"
|
|
::= { hpnicfDot3OmpEmulationStatEntry 10 }
|
|
|
|
|
|
-- Conformance Statements
|
|
|
|
-- Conformance Groups
|
|
|
|
hpnicfDot3OmpeGroups OBJECT IDENTIFIER ::= { hpnicfDot3OmpeConformance 1 }
|
|
|
|
|
|
hpnicfDot3OmpeGroupID OBJECT-GROUP
|
|
OBJECTS {
|
|
hpnicfDot3OmpEmulationID,
|
|
hpnicfDot3OmpEmulationType
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of dot3 OMP emulation ID entity
|
|
state definition."
|
|
::= { hpnicfDot3OmpeGroups 1 }
|
|
|
|
|
|
hpnicfDot3OmpeGroupStat OBJECT-GROUP
|
|
OBJECTS {
|
|
hpnicfDot3OmpEmulationSLDErrors,
|
|
hpnicfDot3OmpEmulationCRC8Errors,
|
|
hpnicfDot3OmpEmulationBadLLID,
|
|
hpnicfDot3OmpEmulationGoodLLID,
|
|
hpnicfDot3OmpEmulationOnuPonCastLLID,
|
|
hpnicfDot3OmpEmulationOltPonCastLLID,
|
|
hpnicfDot3OmpEmulationBroadcastLLIDNotOnuID,
|
|
hpnicfDot3OmpEmulationOnuLLIDNotBroadcast,
|
|
hpnicfDot3OmpEmulationBroadcastLLIDPlusOnuId,
|
|
hpnicfDot3OmpEmulationNotBroadcastLLIDNotOnuId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of dot3 OMP emulation
|
|
Statistics"
|
|
::= { hpnicfDot3OmpeGroups 2 }
|
|
|
|
|
|
-- Compliance
|
|
|
|
hpnicfDot3OmpeCompliances OBJECT IDENTIFIER ::= { hpnicfDot3OmpeConformance 2 }
|
|
|
|
hpnicfDot3OmpeCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for OMPEmulation
|
|
interfaces."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hpnicfDot3OmpeGroupID }
|
|
|
|
GROUP hpnicfDot3OmpeGroupStat
|
|
DESCRIPTION "This group is mandatory for all OMPemulation
|
|
supporting interfaces for Statistics collection."
|
|
|
|
::= { hpnicfDot3OmpeCompliances 1 }
|
|
|
|
|
|
|
|
|
|
-- Editor-s note: MAU managed object definitions (30.5.1)
|
|
|
|
hpnicfDot3EponMauMIB OBJECT IDENTIFIER ::= { hpnicfDot3EfmeponMIB 3 }
|
|
|
|
hpnicfDot3EponMauObjects OBJECT IDENTIFIER ::= { hpnicfDot3EponMauMIB 1 }
|
|
|
|
hpnicfDot3EponMauConformance OBJECT IDENTIFIER ::= { hpnicfDot3EponMauMIB 2 }
|
|
|
|
hpnicfDot3EponMauTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpnicfDot3EponMauEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table for dot3 MAU EPON MIB modules."
|
|
::= { hpnicfDot3EponMauObjects 1 }
|
|
|
|
hpnicfDot3EponMauEntry OBJECT-TYPE
|
|
SYNTAX HpnicfDot3EponMauEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the dot3 MAU EPON MIB modules table."
|
|
INDEX { ifIndex }
|
|
::= { hpnicfDot3EponMauTable 1 }
|
|
|
|
HpnicfDot3EponMauEntry ::=
|
|
SEQUENCE {
|
|
hpnicfDot3EponMauPCSCodingViolation Counter32,
|
|
hpnicfDot3EponMauFecAbility INTEGER,
|
|
hpnicfDot3EponMauFecMode INTEGER,
|
|
hpnicfDot3EponMauFECCorrectedBlocks Counter32,
|
|
hpnicfDot3EponMauFECUncorrectableBlocks Counter32,
|
|
hpnicfDot3EponMauBufferHeadCodingViolation Counter32
|
|
}
|
|
|
|
|
|
hpnicfDot3EponMauPCSCodingViolation OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For 100 Mb/ s operation it is a count of the number of
|
|
times an invalid code-group is received, other than the
|
|
/H/ code-group. For 1000 Mb/ s operation it is a count
|
|
of the number of times an invalid codegroup is received,
|
|
other than the /V/ code-group."
|
|
REFERENCE "[802.3ah], 30.5.1.1.12."
|
|
::= { hpnicfDot3EponMauEntry 1 }
|
|
|
|
hpnicfDot3EponMauFecAbility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (1),
|
|
nonsupported (2),
|
|
supported (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-only value that indicates the support of
|
|
operation of the 1000BASE-PX PHY optional FEC Sublayer
|
|
for Forward error correction see [802.3ah] clause 65.2).
|
|
unknown(1) value is assigned in initializing, for non
|
|
FEC support state or type not yet known. nonsupported(2)
|
|
value is assigned when Sublayer is not support.
|
|
supported(3) value is assigned when Sublayer is
|
|
supported."
|
|
REFERENCE "[802.3ah], 30.5.1.1.13."
|
|
::= { hpnicfDot3EponMauEntry 2 }
|
|
|
|
hpnicfDot3EponMauFecMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown (1),
|
|
disabled (2),
|
|
enabled (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A read-write value that indicates the mode of operation
|
|
of the 1000BASE-PX PHY optional FEC Sublayer for Forward
|
|
error correction see [802.3ah] clause 65.2).
|
|
A GET operation returns the current mode of operation
|
|
the PHY. A SET operation changes the mode of operation
|
|
of the PHY to the indicated value. unknown(1) value is
|
|
assigned in initializing, for non FEC support state or
|
|
type not yet known. disabled(2) value is assigned when
|
|
Sublayer operating in disabled mode. enabled(3) value is
|
|
assigned when Sublayer operating in FEC mode. writing
|
|
can be done all the time."
|
|
REFERENCE "[802.3ah], 30.5.1.1.14."
|
|
DEFVAL { 1 }
|
|
::= { hpnicfDot3EponMauEntry 3 }
|
|
|
|
hpnicfDot3EponMauFECCorrectedBlocks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count
|
|
of corrected FEC blocks. This counter will not increment
|
|
for other PHY Types. Increment the counter by one for
|
|
each received block that is corrected by the FEC
|
|
function in the PHY."
|
|
REFERENCE "[802.3ah], 30.5.1.1.15."
|
|
::= { hpnicfDot3EponMauEntry 4 }
|
|
|
|
hpnicfDot3EponMauFECUncorrectableBlocks OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of
|
|
uncorrectable FEC blocks. This counter will not
|
|
increment for other PHY Types. Increment the counter by
|
|
one for each FEC block that is determined to be
|
|
uncorrectable by the FEC function in the PHY."
|
|
REFERENCE "[802.3ah], 30.5.1.1.16."
|
|
::= { hpnicfDot3EponMauEntry 5 }
|
|
|
|
hpnicfDot3EponMauBufferHeadCodingViolation OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For 1000 Mbps operation it is a counts of the number of
|
|
invalid code-group received directly from the link."
|
|
::= { hpnicfDot3EponMauEntry 6 }
|
|
|
|
|
|
|
|
-- Defining EPON MAU types
|
|
-- Editor's Note: This section should be added to 802.3 MAU MIB
|
|
-- module RFC. Preference would be that the MAU MIB module
|
|
-- structure would change so that it is re-written as an
|
|
-- IANA-maintained module.
|
|
|
|
hpnicfDot3EponMauType OBJECT IDENTIFIER ::= { hpnicfDot3EponMauMIB 3 }
|
|
|
|
hpnicfEponMauType1000BasePXOLT OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "Multipoint MAC Control (per 802.3 section 64,65) OLT
|
|
(master), unknown PMD"
|
|
REFERENCE "[802.3ah], 30.5.1.1.2."
|
|
::= { hpnicfDot3EponMauType 1 }
|
|
|
|
hpnicfEponMauType1000BasePXONU OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "Multipoint MAC Control (per 802.3 section 64,65),ONU
|
|
(slave), unknown PMD"
|
|
REFERENCE "[802.3ah], 30.5.1.1.2."
|
|
::= { hpnicfDot3EponMauType 2 }
|
|
|
|
hpnicfEponMauType1000BasePX10DOLT OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "EPON over 10K link, downlink (per 802.3 section 60),
|
|
OLT side"
|
|
REFERENCE "[802.3ah], 30.5.1.1.2."
|
|
::= { hpnicfDot3EponMauType 3 }
|
|
|
|
hpnicfEponMauType1000BasePX10DONU OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "EPON over 10K link, downlink (per 802.3 section 60),
|
|
ONU side"
|
|
REFERENCE "[802.3ah], 30.5.1.1.2."
|
|
::= { hpnicfDot3EponMauType 4 }
|
|
|
|
hpnicfEponMauType1000BasePX10UOLT OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "EPON over 10K link, uplink (per 802.3 section 60),
|
|
OLT side"
|
|
REFERENCE "[802.3ah], 30.5.1.1.2."
|
|
::= { hpnicfDot3EponMauType 5 }
|
|
|
|
hpnicfEponMauType1000BasePX10UONU OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "EPON over 10K link, uplink (per 802.3 section 60),
|
|
ONU side"
|
|
REFERENCE "[802.3ah], 30.5.1.1.2."
|
|
::= { hpnicfDot3EponMauType 6 }
|
|
|
|
|
|
hpnicfEponMauType1000BasePX20DOLT OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "EPON over 20K link, downlink (per 802.3 section 60),
|
|
OLT side"
|
|
REFERENCE "[802.3ah], 30.5.1.1.2."
|
|
::= { hpnicfDot3EponMauType 7 }
|
|
|
|
hpnicfEponMauType1000BasePX20DONU OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "EPON over 20K link, downlink (per 802.3 section 60),
|
|
ONU side"
|
|
REFERENCE "[802.3ah], 30.5.1.1.2."
|
|
::= { hpnicfDot3EponMauType 8 }
|
|
|
|
hpnicfEponMauType1000BasePX20UOLT OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "EPON over 20K link, uplink (per 802.3 section 60),
|
|
OLT side"
|
|
REFERENCE "[802.3ah], 30.5.1.1.2."
|
|
::= { hpnicfDot3EponMauType 9 }
|
|
|
|
hpnicfEponMauType1000BasePX20UONU OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "EPON over 20K link, uplink (per 802.3 section 60),
|
|
ONU side"
|
|
REFERENCE "[802.3ah], 30.5.1.1.2."
|
|
::= { hpnicfDot3EponMauType 10 }
|
|
|
|
|
|
-- Conformance Statements
|
|
|
|
-- Conformance Groups
|
|
|
|
hpnicfDot3EponMauGroups OBJECT IDENTIFIER ::= { hpnicfDot3EponMauConformance 1 }
|
|
|
|
hpnicfDot3EponMauGroupAll OBJECT-GROUP
|
|
OBJECTS {
|
|
hpnicfDot3EponMauPCSCodingViolation
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of dot3 MAU definition."
|
|
::= { hpnicfDot3EponMauGroups 1 }
|
|
|
|
hpnicfDot3EponMauGroupFEC OBJECT-GROUP
|
|
OBJECTS {
|
|
hpnicfDot3EponMauFecAbility,
|
|
hpnicfDot3EponMauFecMode,
|
|
hpnicfDot3EponMauFECCorrectedBlocks,
|
|
hpnicfDot3EponMauFECUncorrectableBlocks,
|
|
hpnicfDot3EponMauBufferHeadCodingViolation
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of FEC group definition."
|
|
::= { hpnicfDot3EponMauGroups 2 }
|
|
|
|
|
|
-- Compliance
|
|
|
|
hpnicfDot3EponMauCompliances OBJECT IDENTIFIER ::= { hpnicfDot3EponMauConformance 2 }
|
|
|
|
hpnicfDot3EponMauCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for MAU EPON interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { hpnicfDot3EponMauGroupAll }
|
|
|
|
GROUP hpnicfDot3EponMauGroupFEC
|
|
DESCRIPTION "This group is mandatory for all EPON MAU devices
|
|
Supporting FEC functionality as for Definitions and
|
|
BER Statistics collection."
|
|
|
|
::= { hpnicfDot3EponMauCompliances 1 }
|
|
|
|
|
|
END
|