Observium_CE/mibs/h3c/H3C-IPX-MIB

1412 lines
44 KiB
Plaintext

-- ============================================================================
-- Copyright (C) 2003 by H3C TECHNOLOGIES. All rights reserved.
--
-- Description: Internetwork Packet Exchange MIB
-- Reference:
-- Version: V1.0
-- History:
-- V1.0 created by wanglu.
-- ============================================================================
H3C-IPX-MIB DEFINITIONS ::= BEGIN
-- ==================================================================
--
-- Variables and types be imported
--
-- ==================================================================
IMPORTS
Integer32,MODULE-IDENTITY,OBJECT-TYPE,
TimeTicks,Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus
FROM SNMPv2-TC
h3cCommon
FROM HUAWEI-3COM-OID-MIB;
-- ==================================================================
--
-- module identity part
--
-- ==================================================================
h3cIpx MODULE-IDENTITY
LAST-UPDATED
"200412241036Z"
ORGANIZATION
"Hangzhou H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team Hangzhou H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
"This MIB defines management information used on products
which support ipx protocol. It includes 4 parts:
1.ipx interface configuration group - This group
contains configurable management information and statistic
information on each interface.
2.rip group - Rip means route information protocol. This
group contains configurable management information and
route status and route statistic information.
3.sap group - Sap means service access group. This group
contains all service information.
4.ipx statistics group - This group includes ipx statistic
information on all interfaces."
::= { h3cCommon 34 }
-- =============================================================
-- Textual Conventions
-- =============================================================
EnabledStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object."
SYNTAX INTEGER { enabled(1), disabled(2) }
-- ==================================================================
--
-- =====================object definition begin======================
--
-- ==================================================================
h3cIpxConfig OBJECT IDENTIFIER ::= { h3cIpx 1 }
h3cIpxRip OBJECT IDENTIFIER ::= { h3cIpx 2 }
h3cIpxSap OBJECT IDENTIFIER ::= { h3cIpx 3 }
h3cIpxStat OBJECT IDENTIFIER ::= { h3cIpx 4 }
-- h3cIpxIfConfig contains configurable management information
-- on each interface.
h3cIpxStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable ipx globally."
DEFVAL { disabled }
::= { h3cIpxConfig 1 }
h3cIpxIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cIpxIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of configurable management information on each
interface."
::= { h3cIpxConfig 2 }
h3cIpxIfConfigEntry OBJECT-TYPE
SYNTAX H3cIpxIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing management information
about a single interface."
INDEX { h3cIpxIfIndex }
::= { h3cIpxIfConfigTable 1 }
H3cIpxIfConfigEntry ::=
SEQUENCE {
h3cIpxIfIndex Integer32,
h3cIpxIfNetId OCTET STRING,
h3cIpxIfNodeId OCTET STRING,
h3cIpxIfSplitHorizon EnabledStatus,
h3cIPxIfTick Integer32,
h3cIpxIfUpdateChangeOnly EnabledStatus,
h3cIpxIfRipMtu Integer32,
h3cIpxIfEncapsuleType INTEGER,
h3cIpxIfNetbiosPropagation EnabledStatus,
h3cIpxIfSapStatus EnabledStatus,
h3cIpxIfSapMtu Integer32,
h3cIpxIfGnsReply EnabledStatus,
h3cIpxIfRowStatus RowStatus
}
-- node definition
h3cIpxIfIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable uniquely identifies the interface
to which the configurations are applied."
REFERENCE "ifIndex"
::= { h3cIpxIfConfigEntry 1 }
h3cIpxIfNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The network number of the IPX address of this
interface."
::= { h3cIpxIfConfigEntry 2 }
h3cIpxIfNodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node number of the IPX address of this interface."
::= { h3cIpxIfConfigEntry 3 }
h3cIpxIfSplitHorizon OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This node is used to set the split horizon status.
Its default value is 'enabled'. In this case, the interface
which receives a message can't send this message from the
same interface. This function can avoid route loop. But it
is unused for point to point link. If it is set to
'disabled', split horizon is disable."
DEFVAL { enabled }
::= { h3cIpxIfConfigEntry 4 }
h3cIPxIfTick OBJECT-TYPE
SYNTAX Integer32(1..30000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to set this interface's delay time.
It is counted by ticks which is 1/18 second. By default,
the ethernet interface's delay time is 1 tick,
asynchronous serial interface's delay time is 30 ticks,
WAN interface's delay time is 6 ticks."
::= { h3cIpxIfConfigEntry 5 }
h3cIpxIfUpdateChangeOnly OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this variable is set to 'enabled', updating change is
on. And sap and rip will send updating packets periodically
to avoid broadcast storm. Whereas updating change is
off."
DEFVAL { disabled }
::= { h3cIpxIfConfigEntry 6 }
h3cIpxIfRipMtu OBJECT-TYPE
SYNTAX Integer32(432..1500)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to define the max length of RIP
updating packets."
DEFVAL { 432 }
::= { h3cIpxIfConfigEntry 7 }
h3cIpxIfEncapsuleType OBJECT-TYPE
SYNTAX INTEGER {
dot2(1),
dot3(2),
ethernet-2(3),
snap(4),
unkown(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This node is used to define the encapsulating form of
IPX packets. 'dot2' indicates the form is 802.2, while 'dot3'
means 802.3. And 'snap' indicates the form is ethernet-snap.
It takes effect only on ethernet interface, and the default
value is 'dot3', while 'unkown' for other types of port."
DEFVAL { dot3 }
::= { h3cIpxIfConfigEntry 8 }
h3cIpxIfNetbiosPropagation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This node is used to configure whether the current interface
can forward broadcasting packets which IPX type is 20 used
for NetBIOS."
DEFVAL { disabled }
::= { h3cIpxIfConfigEntry 9 }
h3cIpxIfSapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of sap on the current interface. It is enabled
when ipx is enabled on this interface."
DEFVAL { enabled }
::= { h3cIpxIfConfigEntry 10 }
h3cIpxIfSapMtu OBJECT-TYPE
SYNTAX Integer32(480..1500)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to define the max length of SAP
refreshing packets."
DEFVAL { 480 }
::= { h3cIpxIfConfigEntry 11 }
h3cIpxIfGnsReply OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to enable or disable the current
interface to response the IPX GNS request."
DEFVAL { enabled }
::= { h3cIpxIfConfigEntry 12 }
h3cIpxIfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. To create a row, user can
select 'createAndGo'. If the row is created successfully,
this object will became 'active'. To delete one row,
user can select 'destory' and the row will be deleted."
::= { h3cIpxIfConfigEntry 13 }
-- rip group
-- basic configurable management information
h3cIpxRouteMultiplier OBJECT-TYPE
SYNTAX Integer32(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node is used to calculate Rip aging time of route
information.
The absolute aging time =
(h3cIpxRouteMultiplier * h3cIpxRouteUpdateTimer)."
DEFVAL { 3 }
::= { h3cIpxRip 1 }
h3cIpxRouteUpdateTimer OBJECT-TYPE
SYNTAX Integer32(10..60000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node is used to set rip updating time which is based
on seconds"
DEFVAL { 60 }
::= { h3cIpxRip 2 }
h3cIpxRouteImpRouteStatic OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object determines whether static route can be imported."
DEFVAL { disabled }
::= { h3cIpxRip 3 }
h3cIpxRouteLoadBalancePaths OBJECT-TYPE
SYNTAX Integer32(1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the max equivalent paths to the same
destination. If the newly defined value is smaller than the
current value, the routes out of the new value will be set
inactive."
DEFVAL { 1 }
::= { h3cIpxRip 4 }
h3cIpxRouteMaxResPaths OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the max dynamic routes to the same
destination. If the newly defined value is smaller than the
current value, the routes will not be deleted until they age
out or are deleted manually."
DEFVAL { 4 }
::= { h3cIpxRip 5 }
-- h3cIpxRouteTable contains all ipx route information of
-- this system. There are all kinds of information in this table
-- including direct, rip, inactive, active, etc.
h3cIpxRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cIpxRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all dynamic and direct ipx route information
of this system. The information of this table is read only."
::= { h3cIpxRip 6 }
h3cIpxRouteEntry OBJECT-TYPE
SYNTAX H3cIpxRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry includes a dynamic or direct route."
INDEX { h3cIpxRouteIndex }
::= { h3cIpxRouteTable 1 }
H3cIpxRouteEntry ::=
SEQUENCE {
h3cIpxRouteIndex
Integer32,
h3cIpxRouteDestNetId
OCTET STRING,
h3cIpxRouteNextHop
OCTET STRING,
h3cIpxRoutePro
INTEGER,
h3cIpxRoutePre
Integer32,
h3cIpxRouteTicks
Integer32,
h3cIpxRouteHops
Integer32,
h3cIpxRouteTime
Integer32,
h3cIpxRouteOutInterface
OCTET STRING
}
h3cIpxRouteIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies a route."
::= { h3cIpxRouteEntry 1 }
h3cIpxRouteDestNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination network number of this route information,
and its value ranges from 1 to 0xfffffffe."
::= { h3cIpxRouteEntry 2 }
h3cIpxRouteNextHop OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next hop of this route."
::= { h3cIpxRouteEntry 3 }
h3cIpxRoutePro OBJECT-TYPE
SYNTAX INTEGER{
direct(1),
rip(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol type of this route information."
::= { h3cIpxRouteEntry 4 }
h3cIpxRoutePre OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The preference of this route information. The direct route's
preference is 0, and it can't be modified. Dynamic route's
default preference is 100."
::= { h3cIpxRouteEntry 5 }
h3cIpxRouteTicks OBJECT-TYPE
SYNTAX Integer32(1..65534)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time, in ticks, that the packet takes to reach the destination."
::= { h3cIpxRouteEntry 6 }
h3cIpxRouteHops OBJECT-TYPE
SYNTAX Integer32(0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates the number of hops that the packet must be
passed through to reach the destination."
::= { h3cIpxRouteEntry 7 }
h3cIpxRouteTime OBJECT-TYPE
SYNTAX Integer32(0..60000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The aging time of this route information. The aging time of
static and interface route information is 0."
::= { h3cIpxRouteEntry 8 }
h3cIpxRouteOutInterface OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The out interface of this route information."
::= { h3cIpxRouteEntry 9 }
-- h3cIpxStaticRouteTable contains all static route
-- information
h3cIpxStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cIpxStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all static ipx route information of
this system."
::= { h3cIpxRip 7 }
h3cIpxStaticRouteEntry OBJECT-TYPE
SYNTAX H3cIpxStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry includes one static route information."
INDEX { h3cIpxStaticRouteDestNetId,
h3cIpxStaticRouteNextHop }
::= { h3cIpxStaticRouteTable 1 }
H3cIpxStaticRouteEntry ::=
SEQUENCE {
h3cIpxStaticRouteDestNetId
OCTET STRING,
h3cIpxStaticRouteNextHop
OCTET STRING,
h3cIpxStaticRoutePre
Integer32,
h3cIpxStaticRouteOutIf
OCTET STRING,
h3cIpxStaticRouteTicks
Integer32,
h3cIpxStaticRouteHops
Integer32,
h3cIpxStaticRouteStatus
INTEGER,
h3cIpxStaticRouteRowStatus
RowStatus
}
h3cIpxStaticRouteDestNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of Static Route Table. This object and
h3cIpxStaticRouteNextHop uniquely identify a static route.
The destination network number of this static route
information,and its value ranges from 1 to 0xfffffffe.
Note that the broadcast network number is 0xffffffff
and is not allowed in IPX. The network number of
0xfffffffe would be considered to be the network
number of default route."
::= { h3cIpxStaticRouteEntry 1 }
h3cIpxStaticRouteNextHop OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(10))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sub-index of Static Route Table. The next hop of
this static route information."
::= { h3cIpxStaticRouteEntry 2 }
h3cIpxStaticRoutePre OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The preference of this route information. Static route's
preference is 60, and it can be configured."
DEFVAL { 60 }
::= { h3cIpxStaticRouteEntry 3 }
h3cIpxStaticRouteOutIf OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..30))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The out interface of this route. This interface can be serial
or pos interface. "
::= { h3cIpxStaticRouteEntry 4 }
h3cIpxStaticRouteTicks OBJECT-TYPE
SYNTAX Integer32(1..65534)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The time, in ticks that the packet takes to reach the destination
with the static route."
::= { h3cIpxStaticRouteEntry 5 }
h3cIpxStaticRouteHops OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates how many hops are needed to arrive
at the destination network."
DEFVAL { 1 }
::= { h3cIpxStaticRouteEntry 6 }
h3cIpxStaticRouteStatus OBJECT-TYPE
SYNTAX INTEGER{
active(1),
inactive(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this static route."
::= { h3cIpxStaticRouteEntry 7 }
h3cIpxStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. To create a row, user can
select 'createAndGo'. If the row is created successfully,
this object will became 'active'. To delete one row,
user can select 'destory' and the row will be deleted."
::= { h3cIpxStaticRouteEntry 8 }
-- h3cIpxRouteStatTable includes statistic route information
h3cIpxRouteStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cIpxRouteStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table includes all statistic route information."
::= { h3cIpxRip 8 }
h3cIpxRouteStatEntry OBJECT-TYPE
SYNTAX H3cIpxRouteStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry records a statistic information of route."
INDEX { h3cIpxRouteStatPro }
::= { h3cIpxRouteStatTable 1 }
H3cIpxRouteStatEntry ::=
SEQUENCE {
h3cIpxRouteStatPro
INTEGER,
h3cIpxRouteStatRoutes
Counter32,
h3cIpxRouteStatActives
Counter32,
h3cIpxRouteStatAddeds
Counter32,
h3cIpxRouteStatDeleteds
Counter32,
h3cIpxRouteStatFreeds
Counter32
}
h3cIpxRouteStatPro OBJECT-TYPE
SYNTAX INTEGER{
direct(1),
static(2),
rip(3),
default(4),
total(5)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol type of the route information. The value of
'total' is the total amount of all kinds of IPX routes."
::= { h3cIpxRouteStatEntry 1 }
h3cIpxRouteStatRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The route amount of the corresponding protocol type."
::= { h3cIpxRouteStatEntry 2 }
h3cIpxRouteStatActives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active route amount of the corresponding protocol type."
::= { h3cIpxRouteStatEntry 3 }
h3cIpxRouteStatAddeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The added route amount of the corresponding protocol type."
::= { h3cIpxRouteStatEntry 4 }
h3cIpxRouteStatDeleteds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The deleted but not freed route amount of the corresponding
protocol type."
::= { h3cIpxRouteStatEntry 5 }
h3cIpxRouteStatFreeds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The freed route amount of the corresponding protocol type."
::= { h3cIpxRouteStatEntry 6 }
-- sap group
-- basic configurable management information
h3cIpxSapMultiplier OBJECT-TYPE
SYNTAX Integer32(1..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node is used to calculate aging time of service
information.
The absolute aging time =
(h3cIpxSapMultiplier * h3cIpxSapUpdateTimer)."
DEFVAL { 3 }
::= { h3cIpxSap 1 }
h3cIpxSapUpdateTimer OBJECT-TYPE
SYNTAX Integer32(10..60000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This node is used to set service packet updating time which
is based on seconds."
DEFVAL { 60 }
::= { h3cIpxSap 2 }
h3cIpxSapGnsLoadBalance OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set whether the system will reply to the
GNS request with the Round-Robin way. By default, the system will
response to the GNS request with the servers known to the device
in turn, preventing from the nearest server's over loading. With
value of disabled, in this way, the system will response to the
request with the nearest server(who has smallest hop in system's
service information table)."
DEFVAL { enabled }
::= { h3cIpxSap 3 }
h3cIpxSapMaxResServers OBJECT-TYPE
SYNTAX Integer32(1..2048)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure maximum number of servers of a type.
If the newly defined value is smaller than the previous value, the
information out of the value will not be deleted. If the queue reaches
to the maximum number, no new information can be added."
DEFVAL { 2048 }
::= { h3cIpxSap 4 }
-- h3cIpxServiceTable contains the service information
h3cIpxServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cIpxServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table inlcudes all dynamic service information.
The dynamic service information can be read only."
::= { h3cIpxSap 5 }
h3cIpxServiceEntry OBJECT-TYPE
SYNTAX H3cIpxServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One entry records one service"
INDEX { h3cIpxServiceIndex }
::= { h3cIpxServiceTable 1 }
H3cIpxServiceEntry ::=
SEQUENCE{
h3cIpxServiceIndex
Integer32,
h3cIpxServiceName
OCTET STRING,
h3cIpxServiceType
OCTET STRING,
h3cIpxServiceNetId
OCTET STRING,
h3cIpxServiceNodeId
OCTET STRING,
h3cIpxServiceSocketNo
OCTET STRING,
h3cIpxServicePreference
Integer32,
h3cIpxServiceHops
Integer32,
h3cIpxServiceRecvIf
OCTET STRING
}
-- node definition
h3cIpxServiceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies a service information."
::= { h3cIpxServiceEntry 1 }
h3cIpxServiceName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..47))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the service."
::= { h3cIpxServiceEntry 2 }
h3cIpxServiceType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The service type."
::= { h3cIpxServiceEntry 3 }
h3cIpxServiceNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPX network number portion of the IPX address of the service."
::= { h3cIpxServiceEntry 4 }
h3cIpxServiceNodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPX node number portion of the IPX address of the service."
::= { h3cIpxServiceEntry 5 }
h3cIpxServiceSocketNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The socket portion of the IPX address of the service"
::= { h3cIpxServiceEntry 6 }
h3cIpxServicePreference OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The service preference of the service"
::= { h3cIpxServiceEntry 7 }
h3cIpxServiceHops OBJECT-TYPE
SYNTAX Integer32(0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hops from the device to the server."
::= { h3cIpxServiceEntry 8 }
h3cIpxServiceRecvIf OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface from which the service is receieved"
::= { h3cIpxServiceEntry 9 }
-- h3cIpxStaticServiceTable This table contains all static service information
h3cIpxStaticServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cIpxStaticServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table inlcudes all static service information.
This table supports to creation and deletione of a static service,
but not supports to modification"
::= { h3cIpxSap 6 }
h3cIpxStaticServiceEntry OBJECT-TYPE
SYNTAX H3cIpxStaticServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry records one service"
INDEX { h3cIpxStaticServiceType,
h3cIpxStaticServiceName,
h3cIpxStaticServiceNetId }
::= { h3cIpxStaticServiceTable 1 }
H3cIpxStaticServiceEntry ::=
SEQUENCE{
h3cIpxStaticServiceType
OCTET STRING,
h3cIpxStaticServiceName
OCTET STRING,
h3cIpxStaticServiceNetId
OCTET STRING,
h3cIpxStaticServiceNodeId
OCTET STRING,
h3cIpxStatciServiceSocketNo
OCTET STRING,
h3cIpxStaticServicePreference
Integer32,
h3cIpxStaticServiceHops
Integer32,
h3cIpxStaticServiceStatus
INTEGER,
h3cIpxStaticServiceRowStatus
RowStatus
}
-- node definition
h3cIpxStaticServiceType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of static service table."
::= { h3cIpxStaticServiceEntry 1 }
h3cIpxStaticServiceName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..47))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sub-index of static service table. The name of
the service."
::= { h3cIpxStaticServiceEntry 2 }
h3cIpxStaticServiceNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The sub-index of static service table. The IPX network
number portion of the IPX address of the service."
::= { h3cIpxStaticServiceEntry 3 }
h3cIpxStaticServiceNodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The IPX node number portion of the IPX address of the
service."
::= { h3cIpxStaticServiceEntry 4 }
h3cIpxStatciServiceSocketNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The socket portion of the IPX address of the service."
::= { h3cIpxStaticServiceEntry 5 }
h3cIpxStaticServicePreference OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The service preference of the server."
DEFVAL { 60 }
::= { h3cIpxStaticServiceEntry 6 }
h3cIpxStaticServiceHops OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The hops from the device to the server."
::= { h3cIpxStaticServiceEntry 7 }
h3cIpxStaticServiceStatus OBJECT-TYPE
SYNTAX INTEGER{
active(1),
inactive(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the service that you created. The value of
this object is determined by system."
::= { h3cIpxStaticServiceEntry 8 }
h3cIpxStaticServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row. To create a row, user can
select 'createAndGo'. If the row is created successfully,
this object will became 'active'. To delete one row,
user can select 'destory' and the row will be deleted."
::= { h3cIpxStaticServiceEntry 9 }
-- ipx statistics group
-- statistic information about packets Input/Output
h3cIpxStatGlobal OBJECT IDENTIFIER ::= { h3cIpxStat 1 }
h3cIpxStatInterface OBJECT IDENTIFIER ::= { h3cIpxStat 2 }
-- received
h3cIpxStatTotalReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets received."
::= { h3cIpxStatGlobal 1 }
h3cIpxStatPitchs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets filled by device when forwarding
or delivering up to upper protocol."
::= { h3cIpxStatGlobal 2 }
h3cIpxStatLenErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets discarded due to length error."
::= { h3cIpxStatGlobal 3 }
h3cIpxStatFormatErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets discarded due to format error."
::= { h3cIpxStatGlobal 4 }
h3cIpxStatBadHops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets which's value of field Hops
is greater than 16."
::= { h3cIpxStatGlobal 5 }
h3cIpxStatHopsDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets of which hops portion
is equal to 16."
::= { h3cIpxStatGlobal 6 }
h3cIpxStatOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets discarded due to other error."
::= { h3cIpxStatGlobal 7 }
h3cIpxStatLocalDests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets which destination is the
local device. Note that this would include the IPX NetBIOS
propagation packets and those broadcast packets just to
the network on which local device resides."
::= { h3cIpxStatGlobal 8 }
h3cIpxStatCantDeals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets with which can't be dealt.
One possible reason for discarding such a packet would be
receiving a packet of an unknown or unsupported protocol."
::= { h3cIpxStatGlobal 9 }
-- Sent
h3cIpxStatForwards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of received packets to be forwarded in the case that
the entity was not their final destination."
::= { h3cIpxStatGlobal 10 }
h3cIpxStatGenerates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of sent packets that the device generated itself."
::= { h3cIpxStatGlobal 11 }
h3cIpxStatNoRoutes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets discarded due to no route to the
destination was found in routing table."
::= { h3cIpxStatGlobal 12 }
h3cIpxStatOutDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of packets to be discarded when sending out.
Note that this counter would not include the packet(s)
discarded due to no route."
::= { h3cIpxStatGlobal 13 }
-- Rip
h3cIpxStatRipSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP packets sent."
::= { h3cIpxStatGlobal 14 }
h3cIpxStatRipReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP packets received."
::= { h3cIpxStatGlobal 15 }
h3cIpxStaRipRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP response packets sent. "
::= { h3cIpxStatGlobal 16 }
h3cIpxStaRipRspReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP response packets received."
::= { h3cIpxStatGlobal 17 }
h3cIpxStatRipReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP request packets received."
::= { h3cIpxStatGlobal 18 }
h3cIpxStatRipReqDeals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP request packets dealt with."
::= { h3cIpxStatGlobal 19 }
h3cIpxStatRipReqSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP request packets sent."
::= { h3cIpxStatGlobal 20}
h3cIpxStatRipPeriUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of periodic update RIP packets sent."
::= { h3cIpxStatGlobal 21 }
-- Sap
h3cIpxStatSapGenReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP general request packets received."
::= { h3cIpxStatGlobal 22 }
h3cIpxStatSapSpecReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP specific request packets received."
::= { h3cIpxStatGlobal 23 }
h3cIpxStatSapGnsReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP GNS request packets received."
::= { h3cIpxStatGlobal 24 }
h3cIpxStatSapGenRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP general response packets sent."
::= { h3cIpxStatGlobal 25 }
h3cIpxStatSapSpecRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP specific response packets sent."
::= { h3cIpxStatGlobal 26 }
h3cIpxStatSapGnsRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP GNS response packets sent."
::= { h3cIpxStatGlobal 27 }
h3cIpxStatSapPeriUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP periodic update packets sent."
::= { h3cIpxStatGlobal 28 }
h3cIpxStatSapInPktErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP error packets received."
::= { h3cIpxStatGlobal 29 }
-- h3cIpxIfStatTable includes all statistic information
-- on each interface.
h3cIpxIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF H3cIpxIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the statistic information on each interface."
::= { h3cIpxStatInterface 1 }
h3cIpxIfStatEntry OBJECT-TYPE
SYNTAX H3cIpxIfStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of the statistic table."
INDEX { h3cIpxIfStatIndex }
::= { h3cIpxIfStatTable 1 }
H3cIpxIfStatEntry ::=
SEQUENCE{
h3cIpxIfStatIndex
Integer32,
h3cIpxIfStatNetId
OCTET STRING,
h3cIpxIfStatNodeId
OCTET STRING,
--ipx
h3cIpxIfStatIpxReceives
Counter32,
h3cIpxIfStatIpxSends
Counter32,
h3cIpxIfStatIpxRecvBytes
Counter32,
h3cIpxIfStatIpxSendBytes
Counter32,
-- Rip
h3cIpxIfStatRipReceives
Counter32,
h3cIpxIfStatRipSends
Counter32,
h3cIpxIfStatRipDiscards
Counter32,
h3cIpxIfStatRipSpecReqReceives
Counter32,
h3cIpxIfStatRipSpecRspSends
Counter32,
h3cIpxIfStatRipGenReqReceives
Counter32,
h3cIpxIfStatRipGenRspSends
Counter32,
-- Sap
h3cIpxIfStatSapReceives
Counter32,
h3cIpxIfStatSapSends
Counter32,
h3cIpxIfStatSapDiscards
Counter32,
h3cIpxIfStatSapGnsReqReceives
Counter32,
h3cIpxIfStatSapGnsRspSends
Counter32
}
h3cIpxIfStatIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the table's entry. According to the
interface's index."
REFERENCE "ifIndex"
::= { h3cIpxIfStatEntry 1 }
h3cIpxIfStatNetId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The network number of the IPX address of this interface."
::= { h3cIpxIfStatEntry 2 }
h3cIpxIfStatNodeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The node number of the IPX address of this interface."
::= { h3cIpxIfStatEntry 3 }
-- IPX
h3cIpxIfStatIpxReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets received on the interface."
::= { h3cIpxIfStatEntry 4 }
h3cIpxIfStatIpxSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of packets sent on the interface."
::= { h3cIpxIfStatEntry 5 }
h3cIpxIfStatIpxRecvBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of bytes received on the interface."
::= { h3cIpxIfStatEntry 6 }
h3cIpxIfStatIpxSendBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of bytes sent on the interface."
::= { h3cIpxIfStatEntry 7 }
-- Rip
h3cIpxIfStatRipReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP packets received on the interface."
::= { h3cIpxIfStatEntry 8 }
h3cIpxIfStatRipSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP packets sent on the interface."
::= { h3cIpxIfStatEntry 9 }
h3cIpxIfStatRipDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP packets discarded on the interface."
::= { h3cIpxIfStatEntry 10 }
h3cIpxIfStatRipSpecReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP specific request packets received
on the interface."
::= { h3cIpxIfStatEntry 11 }
h3cIpxIfStatRipSpecRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP specific response packets sent
on the interface."
::= { h3cIpxIfStatEntry 12 }
h3cIpxIfStatRipGenReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP general request packets received
on the interface."
::= { h3cIpxIfStatEntry 13 }
h3cIpxIfStatRipGenRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of RIP general response packets sent
on the interface."
::= { h3cIpxIfStatEntry 14 }
-- Sap
h3cIpxIfStatSapReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP packets received on the interface."
::= { h3cIpxIfStatEntry 15 }
h3cIpxIfStatSapSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP packets sent on the interface."
::= { h3cIpxIfStatEntry 16 }
h3cIpxIfStatSapDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP packets discarded on the interface."
::= { h3cIpxIfStatEntry 17 }
h3cIpxIfStatSapGnsReqReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP GNS response packets received
on the interface."
::= { h3cIpxIfStatEntry 18 }
h3cIpxIfStatSapGnsRspSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of SAP GNS response packets sent on
the interface."
::= { h3cIpxIfStatEntry 19 }
END