Observium_CE/mibs/fscom/FS-WLAN-FIT-AP-IN-MIB

1753 lines
58 KiB
Plaintext

-- *******************************************************************
-- FS-WLAN-FIT-AP-IN-MIB.mib : FS MIB
-- May 2010, ruanyucheng
--
-- Copyright (c) 2010 by FS.COM Inc..
-- All rights reserved.
-- *******************************************************************
FS-WLAN-FIT-AP-IN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
IpAddress,
TimeTicks,
Unsigned32
FROM SNMPv2-SMI
TruthValue,
DisplayString,
MacAddress,
RowStatus
FROM SNMPv2-TC
Gauge
FROM RFC1155-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
fsStaMacAddr,
fsApApName,
fsApCfgRadioId,
fsApMacAddr,
fsApgWlanId
FROM FS-AC-MGMT-MIB
ifIndex
FROM RFC1213-MIB
fsMgmt
FROM FS-SMI;
--*******************************************
--* module definition
--*******************************************
fsFitApMibModule MODULE-IDENTITY
LAST-UPDATED "201002260000Z"
ORGANIZATION
"FS.COM Inc.."
CONTACT-INFO
"Tel: 400-865-2852
E-mail: https://www.fs.com/live_chat_service_mail.html "
DESCRIPTION
"
Wlan software private MIB for FS SNC according to the China
Mobile standard. This is device manage MIB.
"
REVISION "201002280000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { fsMgmt 83 }
fsAlarmTrapsObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 10 }
fsAlarmTraps OBJECT IDENTIFIER ::= { fsFitApMibModule 0 }
--**************************************************
--* apFSTrapObjects begins *
--**************************************************
fsWIDSIllegalAlarmTrap NOTIFICATION-TYPE
OBJECTS {
fsWIDSSuspiciousType,
fsWIDSSuspiciousDeviceMac,
fsWIDSSuspiciousDeviceExtensionInfo
}
STATUS current
DESCRIPTION
" This trap will be sent at once when detecting an suspicious AP."
::= { fsAlarmTraps 1 }
fsTelMtWorkModeChgTrap NOTIFICATION-TYPE
OBJECTS {
fsAPCurrentPMMode,
fsChgWorkModeAPMac
}
STATUS current
DESCRIPTION
" This trap will be sent when the ap monitor workMode Change."
::= { fsAlarmTraps 2 }
fsAttackAlarm NOTIFICATION-TYPE
OBJECTS {
fsAttackType,
fsAttackCilentIP,
fsAttackCilentExternInfo
}
STATUS current
DESCRIPTION
" This trap will be sent when Attack has Appeared ."
::= { fsAlarmTraps 4 }
----------------------------------------------------
----------------------------------------------------
fsWIDSSuspiciousType OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Suspicious ap type , eg: nonlicet AP or disturb AP."
::= { fsAlarmTrapsObjects 1 }
fsWIDSSuspiciousDeviceMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The macaddress of the suspicious device."
::= { fsAlarmTrapsObjects 2 }
fsWIDSSuspiciousDeviceExtensionInfo OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The information left for the future extension."
::= { fsAlarmTrapsObjects 3 }
fsAPCurrentPMMode OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The information for the current ap monitor workMode ."
::= { fsAlarmTrapsObjects 4 }
fsChgWorkModeAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The macaddress of the ap device."
::= { fsAlarmTrapsObjects 7 }
fsAttackType OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The attack type string ."
::= { fsAlarmTrapsObjects 8 }
fsAttackCilentIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The ipaddress of the attack client."
::= { fsAlarmTrapsObjects 9 }
fsAttackCilentExternInfo OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The attack extern info string ."
::= { fsAlarmTrapsObjects 10 }
--**************************************************
--* apFSTrapObjects ends *
--**************************************************
fsSystemInfoConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 1 }
fsDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Product Domain."
::= { fsSystemInfoConfigObjects 1 }
fsPhySeparatedEnable OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"virtual phy separated enable config ,0:off 1:on."
::= { fsSystemInfoConfigObjects 2 }
fsForfendDosAttackEnable OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Forfend DOS Attack config ,0:off 1:on."
::= { fsSystemInfoConfigObjects 3 }
fsAcTrafficLoadBalancing OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" AC Traffic Load Balancing enable. "
::= { fsSystemInfoConfigObjects 4 }
fsAcTrafficLoadBalanceThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" AC Traffic Load Balancing Threshold value . "
::= { fsSystemInfoConfigObjects 5 }
fsAcTrafficOtherAPThresholdValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" other AP Traffic Threshold value . "
::= { fsSystemInfoConfigObjects 6 }
fsAcAPWIDSScanningMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" config AP WIDS scanning mode ,
0: all channel scanning 1: auto select channel scanning . "
::= { fsSystemInfoConfigObjects 7 }
fsAcAPLegitimateMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" config AP Legitimate Mode value
0:legal ap 1: Illegal ap 2: Disturb AP . "
::= { fsSystemInfoConfigObjects 8 }
fsAcAPTreatMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" config Illegal AP Process mode 0:DOS attrack 1: disturb AP. "
::= { fsSystemInfoConfigObjects 9 }
fsAcAssociationFailureTotalTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The total times the association fails on AC."
::= { fsSystemInfoConfigObjects 10 }
fsAcAirIfRxTotalDataFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The air interface total Rx Data Farms on AC."
::= { fsSystemInfoConfigObjects 11 }
fsAcAirIfTxTotalDataFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The air interface total Tx Data Farms on AC."
::= { fsSystemInfoConfigObjects 12 }
fsAcAirIfTxTotalLostFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The air interface total Tx Losted Data Farms on AC."
::= { fsSystemInfoConfigObjects 13 }
fsAcAirIfTxAssociateFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The air interface total Tx Associate Farms on AC."
::= { fsSystemInfoConfigObjects 14 }
fsAcAirIfRxAssociateFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The air interface total Rx Associate Farms on AC."
::= { fsSystemInfoConfigObjects 15 }
fsAcAirIfBeaconTotalFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The air interface total Beacon Farms on AC."
::= { fsSystemInfoConfigObjects 16 }
fsAcAirIfRxTotalDataBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The air interface total Rx right Data Bytes on AC."
::= { fsSystemInfoConfigObjects 17 }
fsAcAirIfTxTotalDataBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The air interface total Tx right Data Bytes on AC."
::= { fsSystemInfoConfigObjects 18 }
fsAcAirRxFlux OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The air interface Uplink Flux on AC."
::= { fsSystemInfoConfigObjects 19 }
fsAcAirTxFlux OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The air interface Downlink Flux on AC."
::= { fsSystemInfoConfigObjects 20 }
--*******************************************
-- apAPInfoConfigTable starts
--*******************************************
fsInfoConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 2 }
fsInfoConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSApInfoConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap configuration Info table."
::={ fsInfoConfigObjects 1 }
fsInfoConfigTableEntry OBJECT-TYPE
SYNTAX FSApInfoConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap configuration Info table."
INDEX { fsApMacAddr }
::= { fsInfoConfigTable 1 }
FSApInfoConfigTableEntry ::=
SEQUENCE {
fsAcAPWIDSWorkMode INTEGER
}
fsAcAPWIDSWorkMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" config AP WIDS work mode, 0: WIDS disabled 1:only support monitor
2:support AP monotor and access . "
::= { fsInfoConfigTableEntry 1 }
--*******************************************
-- apAPInfoConfigTable ends
--*******************************************
fsStationConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 4 }
--**************************************************
--* apapAC Station CONFIG starts *
--**************************************************
fsConfigStaInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSApConfigStaInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AC Config Station."
::={ fsStationConfigObjects 1 }
fsConfigStaInfoTableEntry OBJECT-TYPE
SYNTAX FSApConfigStaInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AC Config AP Bandwith max."
INDEX { fsStaMacAddr }
::= { fsConfigStaInfoTable 1 }
FSApConfigStaInfoTableEntry ::=
SEQUENCE {
fsACconfigAPBandwith Integer32
}
fsACconfigAPBandwith OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AC Config AP Bandwith max."
::= { fsConfigStaInfoTableEntry 1 }
--**************************************************
--* apapAC Station CONFIG ends *
--**************************************************
--apWlanIdSecurityCfgObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 5 }
--**************************************************
--* apapAC WlanIdSecurity CONFIG starts *
--**************************************************
--apSecurityCfgTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF ApSecurityCfgTableEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "AP security config."
-- ::={ apWlanIdSecurityCfgObjects 1 }
--apSecurityCfgTableEntry OBJECT-TYPE
-- SYNTAX ApSecurityCfgTableEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "AP security config."
-- INDEX { fsgWlanId }
-- ::= { apSecurityCfgTable 1 }
--ApSecurityCfgTableEntry ::=
-- SEQUENCE {
-- apsecurityMode INTEGER, in china mobile node ApSSIDConfigTableEntry
-- apAuthenMode INTEGER, in china mobile node apSSIDConfigTableEntry
-- apSecurityCiphers INTEGER, in china mobile node apSSIDConfigTableEntry
-- apWEPCipherKeyIndex INTEGER, in china mobile node apSecurityConfigTableEntry
-- apWEPCipherKeyValue DisplayString, in china mobile node apSecurityConfigTableEntry
-- apWEPCipherKeyCharType INTEGER, in china mobile node apSecurityConfigTableEntry
-- apPSKCipherKeyValue DisplayString, in china mobile node apSecurityConfigTableEntry
-- apPSKCipherKeyCharType INTEGER, in china mobile node apSecurityConfigTableEntry
-- apWAPIASIPAddress IpAddress, in china mobile node apSecurityConfigTableEntry
-- apWAPIIsInstalledCer TruthValue, in china mobile node apSecurityConfigTableEntry
-- apWAPIConfigVersion Integer32, in china mobile node apWAPIExternInfoConfigTableEntry
-- apWAPIControlledAuthControl TruthValue, in china mobile node apWAPIExternInfoConfigTableEntry
-- apWAPIControlledPortControl INTEGER, in china mobile node apWAPIExternInfoConfigTableEntry
-- apWAPIOptionImplemented TruthValue, in china mobile node apWAPIExternInfoConfigTableEntry
-- apWAPIPreauthenticationImplemented TruthValue,
-- apWAPIEnabled TruthValue,
-- apWAPIPreauthEnabled TruthValue,
-- apWAPIUnicastKeysSupported Unsigned32,
-- apWAPIUnicastRekeyMethod INTEGER,
-- apWAPIUnicastRekeyTime Unsigned32,
-- apWAPIUnicastRekeyPackets Unsigned32,
-- apWAPIMulticastCipher OCTET STRING,
-- apWAPIMulticastRekeyMethod INTEGER,
-- apWAPIMulticastRekeyTime Unsigned32,
-- apWAPIMulticastRekeyPackets Unsigned32,
-- apWAPIMulticastRekeyStrict TruthValue,
-- apWAPIPSKValue OCTET STRING,
-- apWAPICertificateUpdateCount Unsigned32,
-- apWAPIUnicastUpdateCount Unsigned32,
-- apWAPIMulticastCipherSize Unsigned32,
-- apWAPIBKReauthThreshold Unsigned32,
-- apWAPISATimeout Unsigned32,
-- apWAPIAuthSuiteSelected OCTET STRING,
-- apWAPIUnicastCipherSelected OCTET STRING,
-- apWAPIMulticastCipherSelected OCTET STRING,
-- apWAPIBKIDUsed OCTET STRING,
-- apWAPIAuthSuiteRequested OCTET STRING,
-- apWAPIUnicastCipherRequested OCTET STRING,
-- apWAPIMulticastCipherRequested OCTET STRING,
-- apWAPIUnicastCipher OCTET STRING,
-- apWAPIUnicastCipherEnabled TruthValue,
-- apWAPIUnicastCipherSize Unsigned32,
-- apWAPIAuthenticationSuite OCTET STRING,
-- apWAPIAuthenticationSuiteEnabled TruthValue in china mobile node apWAPIExternInfoConfigTableEntry
-- }
--**************************************************
--* apapAC Security CONFIG ends *
--**************************************************
--**************************************************
--* apapAirIfInfoStatisticsTable starts *
--**************************************************
fsAirIfStatisticsObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 6 }
fsAirIfInfoStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSApAirIfInfoStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"get air interface parameters statistics."
::={ fsAirIfStatisticsObjects 1 }
fsAirIfInfoStatisticsTableEntry OBJECT-TYPE
SYNTAX FSApAirIfInfoStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"get AP Associa Fail times "
INDEX { fsApgWlanId,fsApMacAddr }
::= { fsAirIfInfoStatisticsTable 1 }
FSApAirIfInfoStatisticsTableEntry ::=
SEQUENCE {
fsRxTotalDataFrams Counter32,
fsTxTotalDataFrams Counter32,
fsTxLostDataFrams Counter32,
fsTxAssociateFrams Counter32,
fsRxAssociateFrams Counter32,
fsBeaconFrams Counter32,
fsRxTotalDataBytes Counter32,
fsTxTotalDataBytes Counter32,
fsRESUtilization INTEGER
}
fsRxTotalDataFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap total Rx Data Frams."
::= { fsAirIfInfoStatisticsTableEntry 1 }
fsTxTotalDataFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap total Tx Data Frams."
::= { fsAirIfInfoStatisticsTableEntry 2 }
fsTxLostDataFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap total Tx Lost Data Frams."
::= { fsAirIfInfoStatisticsTableEntry 3 }
fsTxAssociateFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap total Tx Associate Frams."
::= { fsAirIfInfoStatisticsTableEntry 4 }
fsRxAssociateFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap total Rx Associate Frams."
::= { fsAirIfInfoStatisticsTableEntry 5 }
fsBeaconFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Beacon Total Frams."
::= { fsAirIfInfoStatisticsTableEntry 6 }
fsRxTotalDataBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap total Rx Data Bytes."
::= { fsAirIfInfoStatisticsTableEntry 7 }
fsTxTotalDataBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap total Tx Data Bytes."
::= { fsAirIfInfoStatisticsTableEntry 8 }
fsRESUtilization OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Resource Utilization."
::= { fsAirIfInfoStatisticsTableEntry 9 }
---------------------------------------------------------
---------------------------------------------------------
--**************************************************
--* apAirIfInfoStatisticsTable starts *
--**************************************************
fsAirIfTxResendDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSApAirIfTxResendDataTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"get air interface Resend Data frames."
::={ fsAirIfStatisticsObjects 2 }
fsAirIfTxResendDataTableEntry OBJECT-TYPE
SYNTAX FSApAirIfTxResendDataTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"get air interface Resend Data frames"
INDEX { fsStaMacAddr }
::= { fsAirIfTxResendDataTable 1 }
FSApAirIfTxResendDataTableEntry ::=
SEQUENCE {
fsStaResendDataFrams Counter32
}
fsStaResendDataFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station total Resend Data Frams."
::= { fsAirIfTxResendDataTableEntry 1 }
--**************************************************
--* apapAirIfInfoStatisticsTable ends *
--**************************************************
--**************************************************
--* apTermServiceStatistics starts *
--**************************************************
fsTermServiceStatistics OBJECT IDENTIFIER ::= { fsFitApMibModule 7 }
fsTermServiceStatisticsWithSSID OBJECT IDENTIFIER ::= { fsTermServiceStatistics 1 }
fsTermServiceStatisticsWithAP OBJECT IDENTIFIER ::= { fsTermServiceStatistics 2 }
fsTermServiceSTatisticsWithStation OBJECT IDENTIFIER ::= { fsTermServiceStatistics 3 }
fsTermServiceStaticWithSSIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSApTermServiceStaticWithSSIDTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"get Term Service Statistics With SSID."
::={ fsTermServiceStatisticsWithSSID 1 }
fsTermServiceStaticWithSSIDTableEntry OBJECT-TYPE
SYNTAX FSApTermServiceStaticWithSSIDTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"get Term Service Statistics With SSID"
INDEX { fsApgWlanId }
::= { fsTermServiceStaticWithSSIDTable 1 }
FSApTermServiceStaticWithSSIDTableEntry ::=
SEQUENCE {
fsTotalUserNum INTEGER,
fsCurrentUserNum INTEGER,
fsStaReqAccessTimes INTEGER,
fsRspStaAccessReqTimes INTEGER,
fsStaAccessSucessTimes INTEGER,
fsIneffiLinkVerifyFailTime INTEGER,
fsTimeoutLinkVerifyFailTime INTEGER,
fsInefficiencyLinkVerifyFailTime INTEGER,
fsOtherReasonLinkVerifyFailTime INTEGER,
fsIneffiAssociationFailTime INTEGER,
fsTimeoutAssociationFailTime INTEGER,
fsInefficiencyAssociationFailTime INTEGER,
fsOtherReasonAssociationFailTime INTEGER,
fsTotalReassociationAtmptTimes INTEGER,
fsTotalReassociationSuccessTimes INTEGER,
fsIneffiReassociationFailTime INTEGER,
fsTimeoutReassociationFailTime INTEGER,
fsInefficiencyReassociationFailTime INTEGER,
fsOtherReasonReassociationFailTime INTEGER,
fsTotalIdentificationAtmptTimes INTEGER,
fsTotalIdentificationSuccessTimes INTEGER,
fsPwdErrorIdentifyFailTime INTEGER,
fsIneffiIdentificationFailTime INTEGER,
fsTimeoutIdentificationFailTime INTEGER,
fsInefficiencyIdentificationFailTime INTEGER,
fsOtherReasonIdentificationFailTime INTEGER,
fsTotalRemoveLinkVerifyFailTimes INTEGER,
fsLeaveAPCoverageRemoveLinkVerifyFailTimes INTEGER,
fsInefficiencyRemoveLinkVerifyFailTime INTEGER,
fsLinkVerifyFailRemoveLinkVerifyFailTime INTEGER,
fsOtherReasonRemoveLinkVerifyFailTime INTEGER,
fsTotalRemoveLinkAssociationTimes INTEGER,
fsLeaveAPCoverageRemoveAssociationFailTimes INTEGER,
fsInefficiencyRemoveAssociationFailTime INTEGER,
fsAssociationFailRemoveAssociationFailTime INTEGER,
fsOtherReasonRemoveAssociationFailTime INTEGER
}
fsTotalUserNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total user number that have connected to the AP."
::= { fsTermServiceStaticWithSSIDTableEntry 1}
fsCurrentUserNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total current user number that have connected to the AP."
::= { fsTermServiceStaticWithSSIDTableEntry 2}
fsStaReqAccessTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station request to access to AP times."
::= { fsTermServiceStaticWithSSIDTableEntry 3}
fsRspStaAccessReqTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap response station access request times."
::= { fsTermServiceStaticWithSSIDTableEntry 4}
fsStaAccessSucessTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sta success to connet to ap times."
::= { fsTermServiceStaticWithSSIDTableEntry 5}
fsIneffiLinkVerifyFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total link verify failure times due to algorithm or transform SN discrepancy."
::= { fsTermServiceStaticWithSSIDTableEntry 6}
fsTimeoutLinkVerifyFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total link verify failure times due to timeout."
::= { fsTermServiceStaticWithSSIDTableEntry 7}
fsInefficiencyLinkVerifyFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total link verify failure times due to inefficiency."
::= { fsTermServiceStaticWithSSIDTableEntry 8}
fsOtherReasonLinkVerifyFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total link verify failure times due to other reason."
::= { fsTermServiceStaticWithSSIDTableEntry 9}
fsIneffiAssociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Association failure times due to algorithm or transform SN discrepancy."
::= { fsTermServiceStaticWithSSIDTableEntry 10}
fsTimeoutAssociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Association failure times due to timeout."
::= { fsTermServiceStaticWithSSIDTableEntry 11}
fsInefficiencyAssociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Association failure times due to inefficiency."
::= { fsTermServiceStaticWithSSIDTableEntry 12}
fsOtherReasonAssociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Association failure times due to other reason."
::= { fsTermServiceStaticWithSSIDTableEntry 13}
fsTotalReassociationAtmptTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total re-association attempt times."
::= { fsTermServiceStaticWithSSIDTableEntry 14}
fsTotalReassociationSuccessTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total re-association success times."
::= { fsTermServiceStaticWithSSIDTableEntry 15}
fsIneffiReassociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Reassociation failure times due to algorithm or transform SN discrepancy."
::= { fsTermServiceStaticWithSSIDTableEntry 16}
fsTimeoutReassociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Reassociation failure times due to timeout."
::= { fsTermServiceStaticWithSSIDTableEntry 17}
fsInefficiencyReassociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Reassociation failure times due to inefficiency."
::= { fsTermServiceStaticWithSSIDTableEntry 18}
fsOtherReasonReassociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Reassociation failure times due to other reason."
::= { fsTermServiceStaticWithSSIDTableEntry 19}
fsTotalIdentificationAtmptTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Identification attempt times."
::= { fsTermServiceStaticWithSSIDTableEntry 20}
fsTotalIdentificationSuccessTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Identification success times."
::= { fsTermServiceStaticWithSSIDTableEntry 21}
fsPwdErrorIdentifyFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total identification failure times due to password error."
::= { fsTermServiceStaticWithSSIDTableEntry 22}
fsIneffiIdentificationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Identification failure times due to algorithm or transform SN discrepancy."
::= { fsTermServiceStaticWithSSIDTableEntry 23}
fsTimeoutIdentificationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Identification failure times due to timeout."
::= { fsTermServiceStaticWithSSIDTableEntry 24}
fsInefficiencyIdentificationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Identification failure times due to inefficiency."
::= { fsTermServiceStaticWithSSIDTableEntry 25}
fsOtherReasonIdentificationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Identification failure times due to other reason."
::= { fsTermServiceStaticWithSSIDTableEntry 26}
fsTotalRemoveLinkVerifyFailTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total failure times of removing link verification."
::= { fsTermServiceStaticWithSSIDTableEntry 27}
fsLeaveAPCoverageRemoveLinkVerifyFailTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total failure times due to leaving AP coverage area."
::= { fsTermServiceStaticWithSSIDTableEntry 28}
fsInefficiencyRemoveLinkVerifyFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total remove link failure times due to inefficiency."
::= { fsTermServiceStaticWithSSIDTableEntry 29}
fsLinkVerifyFailRemoveLinkVerifyFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total remove link failure times due to link verify failure."
::= { fsTermServiceStaticWithSSIDTableEntry 30}
fsOtherReasonRemoveLinkVerifyFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total remove link failure times due to other reason."
::= { fsTermServiceStaticWithSSIDTableEntry 31}
fsTotalRemoveLinkAssociationTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total failure times of removing association."
::= { fsTermServiceStaticWithSSIDTableEntry 32}
fsLeaveAPCoverageRemoveAssociationFailTimes OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total remove association failure times due to leaving AP coverage area."
::= { fsTermServiceStaticWithSSIDTableEntry 33}
fsInefficiencyRemoveAssociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total remove association failure times due to inefficiency."
::= { fsTermServiceStaticWithSSIDTableEntry 34}
fsAssociationFailRemoveAssociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total remove association failure times due to link verify failure."
::= { fsTermServiceStaticWithSSIDTableEntry 35}
fsOtherReasonRemoveAssociationFailTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total remove association failure times due to other reason."
::= { fsTermServiceStaticWithSSIDTableEntry 36}
--*************************************************
--*************************************************
fsTermServiceStationWithStationTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSTermServiceStationWithStationTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistic of user MAC address by SSID."
::= { fsTermServiceSTatisticsWithStation 1 }
fsTermServiceStationWithStationTableEntry OBJECT-TYPE
SYNTAX FSTermServiceStationWithStationTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apTermServiceStationWithStationTable."
INDEX
{ fsApgWlanId,fsStaMacAddr}
::= { fsTermServiceStationWithStationTable 1 }
FSTermServiceStationWithStationTableEntry ::=
SEQUENCE {
fsStaAssociateTime Counter32,
fsRxStaDataFrams Counter32,
fsRXStaErrorFrams Counter32,
fsTxStaDataFrams Counter32,
fsReSendDataFrams Counter32,
fsStaRxAvgSpeed INTEGER,
fsStaTxAvgSpeed INTEGER,
fsStaThroughput INTEGER,
fsStaSignalStrength INTEGER,
fsStaSignalNoise INTEGER
}
fsStaAssociateTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station Associate to ap time ,unit is minute."
::= { fsTermServiceStationWithStationTableEntry 2}
fsRxStaDataFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Rx station Data Frames ."
::= { fsTermServiceStationWithStationTableEntry 3}
fsRXStaErrorFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Rx station Error Frames ."
::= { fsTermServiceStationWithStationTableEntry 4}
fsTxStaDataFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Tx station Data Frames ."
::= { fsTermServiceStationWithStationTableEntry 5}
fsReSendDataFrams OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Resend station Data Frames ."
::= { fsTermServiceStationWithStationTableEntry 6}
fsStaRxAvgSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Send to station average DATA speed ."
::= { fsTermServiceStationWithStationTableEntry 7}
fsStaTxAvgSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Send from station average DATA speed ."
::= { fsTermServiceStationWithStationTableEntry 8}
fsStaThroughput OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station Throughput ."
::= { fsTermServiceStationWithStationTableEntry 9}
fsStaSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap receive station signal strength ."
::= { fsTermServiceStationWithStationTableEntry 10}
fsStaSignalNoise OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap receive station signal noise ."
::= { fsTermServiceStationWithStationTableEntry 11}
--*************************************************
---------------------------------------------------
---------------------------------------------------
fsTermServiceStaticWithAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSTermServiceStaticWithAPTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"get Term Service Statistics With AP."
::={ fsTermServiceStatisticsWithAP 1 }
fsTermServiceStaticWithAPTableEntry OBJECT-TYPE
SYNTAX FSTermServiceStaticWithAPTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"get Term Service Statistics With AP"
INDEX { fsApMacAddr }
::= { fsTermServiceStaticWithAPTable 1 }
FSTermServiceStaticWithAPTableEntry ::=
SEQUENCE {
fsUserAccumulateTime Counter32,
fsAssociaFailTimes Counter32
}
fsUserAccumulateTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total accumulation time of all users that have connected to the AP."
::= { fsTermServiceStaticWithAPTableEntry 1}
fsAssociaFailTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Associate Fail times for the AP."
::= { fsTermServiceStaticWithAPTableEntry 2}
--**************************************************
--* apTermServiceStatistics ends *
--**************************************************
fsDOT11WIDSParamObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 8 }
--**************************************************
--* apDot11WIDSInfoTable begins
--**************************************************
fsDot11WIDSInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSDot11WIDSInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table used to acac the configuration information of ac/ac."
::={ fsDOT11WIDSParamObjects 1 }
fsDot11WIDSInfoEntry OBJECT-TYPE
SYNTAX FSDot11WIDSInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the table used to acac the configuration information of ac/ac."
INDEX { fsDot11WIDSLocalIndex }
::={ fsDot11WIDSInfoTable 1 }
FSDot11WIDSInfoEntry ::=
SEQUENCE {
fsDot11WIDSLocalIndex INTEGER,
fsDot11WIDSpermittedSSID DisplayString,
fsDot11WIDSpermitBSSID MacAddress,
fsDot11WIDSDeviceOUI DisplayString,
fsDot11WIDSSuspiciousAPBSS MacAddress,
fsDot11WIDSSuspiciousAPCount INTEGER,
fsDot11WIDSMomentFirstTimeDetectedSusAP TimeTicks,
fsDot11WIDSMomentLastTimeDetectedSusAP TimeTicks,
fsDot11WIDSSuspiciousAPSSID DisplayString,
fsDot11WIDSSuspiciousAPMaxSignalStrength INTEGER,
fsDot11WIDSSuspiciousAPUsingChannel INTEGER,
fsDot11WIDSSuspiciousAPFrameEncrption INTEGER,
fsDot11WIDSSuspiciousAPNeedsDealingTag TruthValue,
fsDot11WIDSSuspiciousAPIgnoredTag TruthValue,
fsDot11WIDSSuspiciousSTAMAC MacAddress,
fsDot11WIDSAPCountDetectingSuspiciousSTA INTEGER,
fsDot11WIDSMomentFirstTimeDetectedSusSTA TimeTicks,
fsDot11WIDSMomentLastTimeDetectedSusSTA TimeTicks,
fsDot11WIDSBSSIDSuspiciousSTAAccessing MacAddress,
fsDot11WIDSSuspiciousSTAMaxSignalStrength INTEGER,
fsDot11WIDSSuspiciousSTAUsingChannel INTEGER,
fsDot11WIDSSuspiciousSTAWorksInAdhocMode TruthValue,
fsDot11WIDSSuspiciousSTANeedsDealingTag TruthValue,
fsDot11WIDSSuspiciousSTAIgnoredTag TruthValue,
fsDot11WIDSFloodAttackDetectSwitch TruthValue,
fsDot11WIDSSpoofAttackDetectSwitch TruthValue,
fsDot11WIDSWeakIVDetectSwitch TruthValue,
fsDot11WIDSClearIllegalEquipmentHistroyTag TruthValue,
fsDot11WIDSClearAttackDetectionHistroyTag TruthValue,
fsDot11WIDSClearAttackDetectionStaticsTag TruthValue
}
fsDot11WIDSLocalIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" The dot11 wids local index num ."
::= { fsDot11WIDSInfoEntry 1 }
fsDot11WIDSpermittedSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The ssid permitted to access the service."
::= { fsDot11WIDSInfoEntry 2 }
fsDot11WIDSpermitBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The bssid permitted to access the service."
::= { fsDot11WIDSInfoEntry 3 }
fsDot11WIDSDeviceOUI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The OUI whose device is permitted to provide the service."
::= { fsDot11WIDSInfoEntry 4 }
fsDot11WIDSSuspiciousAPBSS OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The BSS MAC of the Suspicious AP."
::= { fsDot11WIDSInfoEntry 5 }
fsDot11WIDSSuspiciousAPCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The count of the Suspicious AP."
::= { fsDot11WIDSInfoEntry 6 }
fsDot11WIDSMomentFirstTimeDetectedSusAP OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The moment when the AP is detected as the Suspicious AP at the first time."
::= { fsDot11WIDSInfoEntry 7 }
fsDot11WIDSMomentLastTimeDetectedSusAP OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The moment when the AP is detected as the Suspicious AP at the last time."
::= { fsDot11WIDSInfoEntry 8 }
fsDot11WIDSSuspiciousAPSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The SSID of the Suspicious AP."
::= { fsDot11WIDSInfoEntry 9 }
fsDot11WIDSSuspiciousAPMaxSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The max signal strength of the Suspicious AP."
::= { fsDot11WIDSInfoEntry 10 }
fsDot11WIDSSuspiciousAPUsingChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The channel the Suspicious AP is in."
::= { fsDot11WIDSInfoEntry 11 }
fsDot11WIDSSuspiciousAPFrameEncrption OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The frame encrption of the Suspicious AP."
::= { fsDot11WIDSInfoEntry 12 }
fsDot11WIDSSuspiciousAPNeedsDealingTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The tag telling whether it needs to deal the Suspicious AP."
::= { fsDot11WIDSInfoEntry 13 }
fsDot11WIDSSuspiciousAPIgnoredTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The tag telling whether to ignore the Suspicious AP."
::= { fsDot11WIDSInfoEntry 14 }
fsDot11WIDSSuspiciousSTAMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The MAC of the the Suspicious STA."
::= { fsDot11WIDSInfoEntry 15 }
fsDot11WIDSAPCountDetectingSuspiciousSTA OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The AP count which is detecting the Suspicious STA."
::= { fsDot11WIDSInfoEntry 16 }
fsDot11WIDSMomentFirstTimeDetectedSusSTA OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The moment when the STA is detected as the Suspicious STA at the first time."
::= { fsDot11WIDSInfoEntry 17 }
fsDot11WIDSMomentLastTimeDetectedSusSTA OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The moment when the AP is detected as the Suspicious AP at the last time."
::= { fsDot11WIDSInfoEntry 18 }
fsDot11WIDSBSSIDSuspiciousSTAAccessing OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The BSSID which the the Suspicious STA is trying to access."
::= { fsDot11WIDSInfoEntry 19 }
fsDot11WIDSSuspiciousSTAMaxSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The max signal strength of the Suspicious STA."
::= { fsDot11WIDSInfoEntry 20 }
fsDot11WIDSSuspiciousSTAUsingChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The channel the Suspicious sta is in."
::= { fsDot11WIDSInfoEntry 21 }
fsDot11WIDSSuspiciousSTAWorksInAdhocMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The tag whether the Suspicious STA is working in the Ad hoc mode."
::= { fsDot11WIDSInfoEntry 22 }
fsDot11WIDSSuspiciousSTANeedsDealingTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The tag telling whether it needs to deal the Suspicious STA."
::= { fsDot11WIDSInfoEntry 23 }
fsDot11WIDSSuspiciousSTAIgnoredTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The tag telling whether to ignore the Suspicious STA."
::= { fsDot11WIDSInfoEntry 24 }
fsDot11WIDSFloodAttackDetectSwitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This tag tells whether to enable flooding attack detecting."
::= { fsDot11WIDSInfoEntry 25 }
fsDot11WIDSSpoofAttackDetectSwitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This tag tells whether to enable spoof attack detecting."
::= { fsDot11WIDSInfoEntry 26 }
fsDot11WIDSWeakIVDetectSwitch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This tag tells whether to enable weak IV detecting."
::= { fsDot11WIDSInfoEntry 27 }
fsDot11WIDSClearIllegalEquipmentHistroyTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This tag tells whether to clear the illegal equipment history."
::= { fsDot11WIDSInfoEntry 28 }
fsDot11WIDSClearAttackDetectionHistroyTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This tag tells whether to clear the attack detection history."
::= { fsDot11WIDSInfoEntry 29 }
fsDot11WIDSClearAttackDetectionStaticsTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This tag tells whether to clear the attack detection statics."
::= { fsDot11WIDSInfoEntry 30 }
--**************************************************
--* apDot11WIDSInfoTable ends
--**************************************************
--**************************************************
--* apDot11LawlessApInfoTable starts
--**************************************************
fsDot11LawlessApInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSDot11LawlessApInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table used to display Lawless AP info t"
::={ fsDOT11WIDSParamObjects 2 }
fsDot11LawlessApInfoTableEntry OBJECT-TYPE
SYNTAX FSDot11LawlessApInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table used to display Lawless AP info "
INDEX { fsLawlessAPIndex }
::={ fsDot11LawlessApInfoTable 1 }
FSDot11LawlessApInfoTableEntry ::=
SEQUENCE {
fsLawlessAPIndex INTEGER,
fsLawlessAPSignalStrength Integer32,
fsLawlessAPSignalSNR Integer32,
fsLawlessAPChannelNum INTEGER,
fsLawlessAPSSIDName DisplayString,
fsLawlessAPMacaddr MacAddress,
fsLawlessAPTreatMode INTEGER
}
fsLawlessAPIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This is Lawless AP local Index number ."
::= { fsDot11LawlessApInfoTableEntry 1 }
fsLawlessAPSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Lawless AP signal Strength ."
::= { fsDot11LawlessApInfoTableEntry 2 }
fsLawlessAPSignalSNR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Lawless AP signal SNR ."
::= { fsDot11LawlessApInfoTableEntry 3 }
fsLawlessAPChannelNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Lawless AP Channel Number ."
::= { fsDot11LawlessApInfoTableEntry 4 }
fsLawlessAPSSIDName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Lawless AP SSID Name display ."
::= { fsDot11LawlessApInfoTableEntry 5 }
fsLawlessAPMacaddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Lawless AP BSSID <MAC_ADDRESS> ."
::= { fsDot11LawlessApInfoTableEntry 6 }
fsLawlessAPTreatMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Lawless AP Treat mode detail 1: DosAttack state
2: disturb User connect to lawless AP ."
::= { fsDot11LawlessApInfoTableEntry 7 }
--**************************************************
--* apLawlessApInfoTable ends
--**************************************************
--**************************************************
--* apDot11UndefinedApInfoTable starts
--**************************************************
fsDot11UndefinedApInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSDot11UndefinedApInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table used to display Undefined AP info t"
::={ fsDOT11WIDSParamObjects 3 }
fsDot11UndefinedApInfoTableEntry OBJECT-TYPE
SYNTAX FSDot11UndefinedApInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table used to display Undefined AP info "
INDEX { fsUndefinedAPIndex }
::={ fsDot11UndefinedApInfoTable 1 }
FSDot11UndefinedApInfoTableEntry ::=
SEQUENCE {
fsUndefinedAPIndex INTEGER,
fsUndefinedAPSignalStrength Integer32,
fsUndefinedAPSignalSNR Integer32,
fsUndefinedAPChannelNum INTEGER,
fsUndefinedAPSSIDName DisplayString,
fsUndefinedAPMacaddr MacAddress,
fsUndefinedAPTreatMode INTEGER
}
fsUndefinedAPIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This is Undefined AP local Index number ."
::= { fsDot11UndefinedApInfoTableEntry 1 }
fsUndefinedAPSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Undefined AP signal Strength ."
::= { fsDot11UndefinedApInfoTableEntry 2 }
fsUndefinedAPSignalSNR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Undefined AP signal SNR ."
::= { fsDot11UndefinedApInfoTableEntry 3 }
fsUndefinedAPChannelNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Undefined AP Channel Number ."
::= { fsDot11UndefinedApInfoTableEntry 4 }
fsUndefinedAPSSIDName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Undefined AP SSID Name display ."
::= { fsDot11UndefinedApInfoTableEntry 5 }
fsUndefinedAPMacaddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Undefined AP BSSID <MAC_ADDRESS> ."
::= { fsDot11UndefinedApInfoTableEntry 6 }
fsUndefinedAPTreatMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Undefined AP Treat mode detail 1: DosAttack state
2: disturb User connect to lawless AP ."
::= { fsDot11UndefinedApInfoTableEntry 7 }
--**************************************************
--* fsUndefinedApInfoTable ends
--**************************************************
--**************************************************
--* apDot11LegalityApInfoTable starts
--**************************************************
fsDot11LegalityApInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FSDot11LegalityApInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table used to display Legality AP info t"
::={ fsDOT11WIDSParamObjects 4 }
fsDot11LegalityApInfoTableEntry OBJECT-TYPE
SYNTAX FSDot11LegalityApInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table used to display Legality AP info "
INDEX { fsLegalityAPIndex }
::={ fsDot11LegalityApInfoTable 1 }
FSDot11LegalityApInfoTableEntry ::=
SEQUENCE {
fsLegalityAPIndex INTEGER,
fsLegalityAPSignalStrength Integer32,
fsLegalityAPSignalSNR Integer32,
fsLegalityAPChannelNum INTEGER,
fsLegalityAPSSIDName DisplayString,
fsLegalityAPMacaddr MacAddress,
fsLegalityAPTreatMode INTEGER
}
fsLegalityAPIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This is Legality AP local Index number ."
::= { fsDot11LegalityApInfoTableEntry 1 }
fsLegalityAPSignalStrength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Legality AP signal Strength ."
::= { fsDot11LegalityApInfoTableEntry 2 }
fsLegalityAPSignalSNR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Legality AP signal SNR ."
::= { fsDot11LegalityApInfoTableEntry 3 }
fsLegalityAPChannelNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Legality AP Channel Number ."
::= { fsDot11LegalityApInfoTableEntry 4 }
fsLegalityAPSSIDName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Legality AP SSID Name display ."
::= { fsDot11LegalityApInfoTableEntry 5 }
fsLegalityAPMacaddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Legality AP BSSID <MAC_ADDRESS> ."
::= { fsDot11LegalityApInfoTableEntry 6 }
fsLegalityAPTreatMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is Legality AP Treat mode detail 1: DosAttack state
2: disturb User connect to lawless AP ."
::= { fsDot11LegalityApInfoTableEntry 7 }
--**************************************************
--* fsLegalityApInfoTable ends
--**************************************************
--**********************************************
--* apSSIDListCreateTable starts
--**********************************************
--apSSIDConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 9 } please see china mobile node ApSSIDListCreateTableEntry
--apSSIDListCreateTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF ApSSIDListCreateTableEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The SSID list manegment for ap."
-- ::={ apSSIDConfigObjects 1 }
--apSSIDListCreateTableEntry OBJECT-TYPE
-- SYNTAX ApSSIDListCreateTableEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "The SSID list manegment for ap"
-- INDEX {fsgWlanId}
-- ::= { apSSIDListCreateTable 1 }
--ApSSIDListCreateTableEntry ::=
-- SEQUENCE {
-- apListBSSIDAddr MacAddress,
-- apSSIDRadioNum INTEGER,
-- apSSIDApMACaddr MacAddress
-- }
--**********************************************
--*apSSIDListCreateTable ends
--**********************************************
END