WebApps/Observium_CE
1
0
Fork 0
Code Pull Requests Activity
Observium_CE/mibs/fscom/FS-WLAN-FIT-AP-CF-MIB

8767 lines
262 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- FS-WLAN-FIT-AP-CF-MIB.mib : FS MIB
-- May 2010, ruanyucheng
--
-- Copyright (c) 2010 by FS.COM Inc..
-- All rights reserved.
-- *******************************************************************
FS-WLAN-FIT-AP-CF-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
Counter64,
IpAddress,
Unsigned32
FROM SNMPv2-SMI
TruthValue,
DisplayString,
MacAddress,
RowStatus
FROM SNMPv2-TC
Gauge
FROM RFC1155-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
fsStaMacAddr,
fsApApName,
fsApCfgRadioId,
fsApMacAddr,
fsApgWlanId
FROM FS-AC-MGMT-MIB
IANAifType
FROM IANAifType-MIB
ifIndex
FROM RFC1213-MIB
TimeTicks
FROM SNMPv2-SMI
fsMgmt
FROM FS-SMI;
--*******************************************
--* module definition
--*******************************************
fsFitApMibModule MODULE-IDENTITY
LAST-UPDATED "201002260000Z"
ORGANIZATION
"FS.COM Inc.."
CONTACT-INFO
"Tel: 400-865-2852
E-mail: https://www.fs.com/live_chat_service_mail.html "
DESCRIPTION
"
Wlan software private MIB for FS SNC according to the China
Mobile standard. This is device manage MIB.
"
REVISION "201002280000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { fsMgmt 81 }
--**************************************************
--* apFSTrapObjects begins *
--**************************************************
apFSAlarmTraps OBJECT IDENTIFIER ::= { fsFitApMibModule 0 }
apFSAlarmTrapObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 11 }
apSystemAlarmTraps OBJECT IDENTIFIER ::= { apFSAlarmTraps 1 }
apWirelessAlarmTraps OBJECT IDENTIFIER ::= { apFSAlarmTraps 2 }
apStaAnnounceTraps OBJECT IDENTIFIER ::= { apFSAlarmTraps 3 }
apWAPISecurityAlarmTraps OBJECT IDENTIFIER ::= { apFSAlarmTraps 4 }
apEgAnnounceTraps OBJECT IDENTIFIER ::= { apFSAlarmTraps 5 }
--**************apSystemAlarmTraps start ************************************
apCPUusageTooHighTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" This trap will be sent when the ap cpu usage too High."
::= { apSystemAlarmTraps 1 }
apCPUusageTooHighRecovTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" This trap will be sent when the ap cpu usage too High state disappeared."
::= { apSystemAlarmTraps 2 }
apMemUsageTooHighTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" This trap will be sent when the ap Memory usage too High."
::= { apSystemAlarmTraps 3 }
apMemUsageTooHighRecovTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" This trap will be sent when the ap Memory usage too High state disappeared."
::= { apSystemAlarmTraps 4 }
aPOfflineTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" This trap will be sent when the ap offline."
::= { apSystemAlarmTraps 5 }
aPOnlineTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
" This trap will be sent when the ap Online."
::= { apSystemAlarmTraps 6 }
aPMtWorkModeChgTrap NOTIFICATION-TYPE
OBJECTS {
apAPMac,
apWorkModeBeforeChange,
apWorkModeAfterChange
}
STATUS current
DESCRIPTION
" This trap will be sent when the ap monitor workMode Change."
::= { apSystemAlarmTraps 7 }
apSoftwareUpdateFailTrap NOTIFICATION-TYPE
OBJECTS {
updateFailReason,
apSWVersionBeforeUpdate
}
STATUS current
DESCRIPTION
" This trap will be sent when software update fail."
::= { apSystemAlarmTraps 8 }
apSSIDCyperConflictTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apSSIDKey,
apSSIDKeyConflict,
apCyperIndex
}
STATUS current
DESCRIPTION
" This trap will be sent when SSID cyper conflict."
::= { apSystemAlarmTraps 9 }
--***************apWirelessAlarmTraps************************
aPCoInterfDetectedTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPChannel,
apInterfAPBSSID
}
STATUS current
DESCRIPTION
" This trap will be sent when detecting an same channel AP interfere Detected"
::= { apWirelessAlarmTraps 1 }
aPCoInterfClearTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPChannel,
apInterfAPBSSID
}
STATUS current
DESCRIPTION
" This trap will be sent when the an same channel AP interfere Disappear."
::= { apWirelessAlarmTraps 2 }
aPNerborInterfDetectedTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPChannel,
apInterfAPBSSID,
apInterfAPChannel
}
STATUS current
DESCRIPTION
" This trap will be sent when detecting an same channel Nerbor AP interfere Detected"
::= { apWirelessAlarmTraps 3 }
aPNeiborInterfClearTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPChannel,
apInterfAPBSSID,
apInterfAPChannel
}
STATUS current
DESCRIPTION
" This trap will be sent when the Neibor interfere AP Disappear."
::= { apWirelessAlarmTraps 4 }
staInterfDetectedTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPChannel,
apInterfStaMac
}
STATUS current
DESCRIPTION
" This trap will be sent when the Station interfere Detected."
::= { apWirelessAlarmTraps 5 }
staInterfClearTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPChannel,
apInterfStaMac
}
STATUS current
DESCRIPTION
" This trap will be sent when the Station interfere Disappear."
::= { apWirelessAlarmTraps 6 }
otherDeviceInterfDetectedTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPChannel
}
STATUS current
DESCRIPTION
" This trap will be sent when the other interfere Device Detected."
::= { apWirelessAlarmTraps 7 }
otherDevInterfClearTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPChannel
}
STATUS current
DESCRIPTION
" This trap will be sent when the other interfere Device Disappear."
::= { apWirelessAlarmTraps 8 }
apRadioDownTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apInterruptReason
}
STATUS current
DESCRIPTION
" This trap will be sent when AP Radio has been down"
::= { apWirelessAlarmTraps 9 }
apRadioDownRecovTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apInterruptReason
}
STATUS current
DESCRIPTION
" This trap will be sent when AP Radio down State Disappear."
::= { apWirelessAlarmTraps 10 }
aPStaFullTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apPermitAssoUser,
apAssoFailReason
}
STATUS current
DESCRIPTION
" This trap will be sent when AP Station Num has reach to MAX ,
AP can not add another Station."
::= { apWirelessAlarmTraps 11 }
aPStaFullRecoverTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apPermitAssoUser,
apAssoFailReason
}
STATUS current
DESCRIPTION
" This trap will be sent when AP Station Num reach to MAX state disapper,
AP can add other Stations."
::= { apWirelessAlarmTraps 12 }
aPMtRdoChanlChgTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apChannelBeforeChange,
apChannelAfterChange,
apChanChangeMode
}
STATUS current
DESCRIPTION
" This trap will be sent when AP Channel has been changed ."
::= { apWirelessAlarmTraps 13 }
apSpeciusDeviceDetectTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apSpeciousDeviceMac
}
STATUS current
DESCRIPTION
" This trap will be sent when specious device is found ."
::= { apWirelessAlarmTraps 14 }
apRadioRxPackagesTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apAPRadioId,
apRevPackages
}
STATUS current
DESCRIPTION
" This trap will be sent when AP receive packages update."
::= { apWirelessAlarmTraps 15 }
apCPUUsageTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apCPUUsage
}
STATUS current
DESCRIPTION
" This trap will be sent when cpu usage rate update."
::= { apWirelessAlarmTraps 16 }
apSTARefusedRSSITrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apStaMacAddr,
apRSSI
}
STATUS current
DESCRIPTION
" This trap will be sent when sta rssi is lower than rssi thrreshold."
::= { apWirelessAlarmTraps 17 }
apSTARefusedRatesetTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apStaMacAddr
}
STATUS current
DESCRIPTION
" This trap will be sent when rate set is not satisified."
::= { apWirelessAlarmTraps 18 }
apFindAttackTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apAttackReason
}
STATUS current
DESCRIPTION
" This trap will be sent when rate set is not satisified."
::= { apWirelessAlarmTraps 19 }
wlanSecurityChgTrap NOTIFICATION-TYPE
OBJECTS {
apWlanId,
apWlanSSID,
apWlanSecurityModeBeforeChg,
apWlanSecurityModeAfterChg
}
STATUS current
DESCRIPTION
" This trap will be sent when wlan security mode has been changed "
::= { apWirelessAlarmTraps 20 }
apRadioFailureTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apInterruptReason
}
STATUS current
DESCRIPTION
" This trap will be sent when AP Radio failure"
::= { apWirelessAlarmTraps 21 }
apIllegalApTrap NOTIFICATION-TYPE
OBJECTS {
apTrapIllegalApMac,
apTrapIllegalApChannel,
apTrapIllegalApRSSI,
apTrapWorkingApMac,
apTrapWorkingApBSSID,
apTrapIllegalApType,
apTrapIllegalApSSID
}
STATUS current
DESCRIPTION
" This trap will be sent when AP detect illegal ap"
::= { apWirelessAlarmTraps 22 }
apIllegalApRecoverTrap NOTIFICATION-TYPE
OBJECTS {
apTrapIllegalApMac,
apTrapIllegalApChannel,
apTrapIllegalApRSSI,
apTrapWorkingApMac,
apTrapWorkingApBSSID,
apTrapIllegalApType,
apTrapIllegalApSSID
}
STATUS current
DESCRIPTION
" This trap will be sent when illegal ap disappears"
::= { apWirelessAlarmTraps 23 }
apStaAssocFailTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apStaMacAddr,
apAPRadioId,
apAPRadioType,
apAssocAuthMode,
apStaRSSI,
apWorkingAPSSID,
apAssocFailReason,
apWorkingAPChannel
}
STATUS current
DESCRIPTION
" This trap will be sent when sta assoc fail"
::= { apWirelessAlarmTraps 24 }
apSpectralInfoTrap NOTIFICATION-TYPE
OBJECTS {
apSpectralInfoApMac,
apSpectralInfoType,
apSpectralInfoFreq,
apSpectralInfoRssi
}
STATUS current
DESCRIPTION
" This trap will be sent when AC receive spectral info from AP"
::= { apWirelessAlarmTraps 25 }
apCounterMeasureTrap NOTIFICATION-TYPE
OBJECTS {
apCounterMeasureApMac,
apCounterMeasureBssid
}
STATUS current
DESCRIPTION
" This trap will be sent when AC receive counter measure info from AP"
::= { apWirelessAlarmTraps 26 }
--*****************apStaAnnounceTraps*****************
apStaAuthErrorTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPBSSID,
apWorkingAPSSID,
apStaMacAddr,
apAuthMode,
apAuthFailReason
}
STATUS current
DESCRIPTION
" This trap will be sent when station connect ap,then Auth Fail appeared."
::= { apStaAnnounceTraps 1 }
apStAssociationFailTrap NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPBSSID,
apWorkingAPSSID,
apStaMacAddr,
apAssoFailReason
}
STATUS current
DESCRIPTION
" This trap will be sent when station Associa Fail appeared."
::= { apStaAnnounceTraps 2 }
fsNotifyWebAuthMacTrap NOTIFICATION-TYPE
OBJECTS {
webAuthTlvCount,
webAuthTlvString
}
STATUS current
DESCRIPTION
" This trap will be sent when station auth success."
::= { apStaAnnounceTraps 3 }
--****************apWAPISecurityAlarmTraps************
userwithInvalidCerficationInbreakNetwork NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPBSSID,
apWorkingAPSSID,
apStaMacAddr
}
STATUS current
DESCRIPTION
" This trap will be sent when detecting an user accesses the network
with invlid certification."
::= { apWAPISecurityAlarmTraps 1 }
stationRepititiveAttack NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPBSSID,
apWorkingAPSSID,
apStaMacAddr
}
STATUS current
DESCRIPTION
" This trap will be sent when detecting an illegal client catches the
packets of the WAPI authentication process of legal client and pretend
to be legal client to authenticate."
::= { apWAPISecurityAlarmTraps 2 }
tamperAttack NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPBSSID,
apWorkingAPSSID,
apStaMacAddr
}
STATUS current
DESCRIPTION
" This trap will be sent when detecting an illegal client catches the
packets of the WAPI authentication process of legal client, modifies
the bytes of the authentication code of the packets and uses the packets
to pass the WAPI authentication."
::= { apWAPISecurityAlarmTraps 3 }
lowSafeLevelAttack NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPBSSID,
apWorkingAPSSID,
apStaMacAddr
}
STATUS current
DESCRIPTION
" This trap will be sent when detecting an illegal client catches the
packets of the WAPI authentication process of legal client, modifies
the bytes of the authentication code of the packets to lower the safe
level and uses the packets to pass the WAPI authentication."
::= { apWAPISecurityAlarmTraps 4 }
addressRedirectionAttack NOTIFICATION-TYPE
OBJECTS {
fsApMacAddr,
apWorkingAPRadioIfInfo,
apWorkingAPBSSID,
apWorkingAPSSID,
apStaMacAddr
}
STATUS current
DESCRIPTION
" This trap will be sent when detecting an client passes the authentication
process, but the destination address of the 802.11 head of the WPI frame."
::= { apWAPISecurityAlarmTraps 5 }
--**************apEgAnnounceTraps start ************************************
apEgAnnounceApReport NOTIFICATION-TYPE
OBJECTS {
apAPMac,
apApName,
apApLocation,
apApUptime,
apApChannel2,
apApChannel5,
apApUserNum
}
STATUS current
DESCRIPTION
"This trap will be sent to EG when AP is up and every 5 minutes thereafter."
::= { apEgAnnounceTraps 1 }
apEgAnnounceSsidReport NOTIFICATION-TYPE
OBJECTS {
apAPMac,
apSsidName,
apSsidIndex,
apSsidDot11Auth,
apSsidSecurityMode,
apSsidAuthenMode
}
STATUS current
DESCRIPTION
"This trap will be sent to EG together with apEgAnnounceApReport, one trap for each ssid."
::= { apEgAnnounceTraps 2 }
apEgAnnounceApDown NOTIFICATION-TYPE
OBJECTS {
apAPMac
}
STATUS current
DESCRIPTION
"This trap will be sent to EG when AP is down(if possible)."
::= { apEgAnnounceTraps 3 }
apEgAnnounceStaUp NOTIFICATION-TYPE
OBJECTS {
apAPMac,
apStaMacAddr,
apWlanSSID,
apStaRSSI
}
STATUS current
DESCRIPTION
"This trap will be sent to EG when STA attaches to AP."
::= { apEgAnnounceTraps 4 }
apEgAnnounceStaDown NOTIFICATION-TYPE
OBJECTS {
apAPMac,
apStaMacAddr,
apWlanSSID,
apStaRSSI
}
STATUS current
DESCRIPTION
"This trap will be sent to EG when STA leaves AP."
::= { apEgAnnounceTraps 5 }
--**************apEgAnnounceTraps end ************************************
--***************apFSAlarmTrapObjects*************
apAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP mac address"
::= { apFSAlarmTrapObjects 1 }
apWorkModeBeforeChange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ap work mode before change"
::= { apFSAlarmTrapObjects 2 }
apWorkModeAfterChange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ap work mode after change"
::= { apFSAlarmTrapObjects 3 }
apSSIDKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Key SSID"
::= { apFSAlarmTrapObjects 4 }
apSSIDKeyConflict OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Key SSID"
::= { apFSAlarmTrapObjects 5 }
apCyperIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Key SSID"
::= { apFSAlarmTrapObjects 6 }
apInterruptReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interrupt reason of the wireless link"
::= { apFSAlarmTrapObjects 7}
apWorkingAPRadioIfInfo OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"radio interface infomation."
::= { apFSAlarmTrapObjects 8}
apWorkingAPChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel of working AP"
::= { apFSAlarmTrapObjects 9}
apInterfAPChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel of inteference AP"
::= { apFSAlarmTrapObjects 10}
apInterfAPBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BSSID of inteference AP"
::= { apFSAlarmTrapObjects 11}
apInterfStaMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"mac of inteference STA"
::= { apFSAlarmTrapObjects 12}
apPermitAssoUser OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"mac of inteference STA"
::= { apFSAlarmTrapObjects 13}
apAssoFailReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association fail reason."
::= { apFSAlarmTrapObjects 14}
apChannelBeforeChange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"radio channel before channel change."
::= { apFSAlarmTrapObjects 15}
apChannelAfterChange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"radio channel after channel change."
::= { apFSAlarmTrapObjects 16}
apChanChangeMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"radio channel change mode."
::= { apFSAlarmTrapObjects 17}
apWorkingAPBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP BSSID"
::= { apFSAlarmTrapObjects 18}
apWorkingAPSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP SSID"
::= { apFSAlarmTrapObjects 19}
apStaMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the STA"
::= { apFSAlarmTrapObjects 20}
apAuthMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"auth mode"
::= { apFSAlarmTrapObjects 21}
apAuthFailReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason of the failure"
::= { apFSAlarmTrapObjects 22}
updateFailReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"software update fail reason"
::= { apFSAlarmTrapObjects 23 }
apSWVersionBeforeUpdate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"software version before update"
::= { apFSAlarmTrapObjects 24 }
apAPRadioId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP radio id"
::= { apFSAlarmTrapObjects 25 }
apRevPackages OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP received packages"
::= { apFSAlarmTrapObjects 26 }
apCPUUsage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP CPU usage"
::= { apFSAlarmTrapObjects 27 }
apSpeciousDeviceMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"specious device mac address"
::= { apFSAlarmTrapObjects 28 }
apRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STA RSSI value"
::= { apFSAlarmTrapObjects 29 }
apAttackReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"attack reason"
::= { apFSAlarmTrapObjects 30 }
apWlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wlan id"
::= { apFSAlarmTrapObjects 31 }
apWlanSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wlan ssid"
::= { apFSAlarmTrapObjects 32 }
apWlanSecurityModeBeforeChg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wlan Security Mode Before Change."
::= { apFSAlarmTrapObjects 33 }
apWlanSecurityModeAfterChg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wlan Security Mode After Change."
::= { apFSAlarmTrapObjects 34 }
apTrapIllegalApMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"illegal ap mac, trap bind var."
::= { apFSAlarmTrapObjects 35 }
apTrapIllegalApChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"illegal ap channel, trap bind var."
::= { apFSAlarmTrapObjects 36 }
apTrapIllegalApRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"illegal ap RSSI, trap bind var."
::= { apFSAlarmTrapObjects 37 }
apTrapWorkingApMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"working ap mac, trap bind var."
::= { apFSAlarmTrapObjects 38 }
apTrapWorkingApBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"working ap bssid, trap bind var."
::= { apFSAlarmTrapObjects 39 }
apTrapIllegalApType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"illegal ap type, trap bind var."
::= { apFSAlarmTrapObjects 40 }
apTrapIllegalApSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"illegal ap SSID, trap bind var."
::= { apFSAlarmTrapObjects 41 }
apAPRadioType OBJECT-TYPE
SYNTAX INTEGER{
dot11a(0),
dot11b(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap radio type 0:80211a 1:80211b, trap bind var."
::= { apFSAlarmTrapObjects 42 }
apAssocAuthMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"assoc auth mode, trap bind var."
::= { apFSAlarmTrapObjects 43 }
apStaRSSI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sta RSSI, trap bind var."
::= { apFSAlarmTrapObjects 44 }
apAssocFailReason OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"assoc fail reason, trap bind var."
::= { apFSAlarmTrapObjects 45 }
apSpectralInfoApMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"spectral ap mac, trap bind var."
::= { apFSAlarmTrapObjects 46 }
apSpectralInfoType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"spectral type, trap bind var."
::= { apFSAlarmTrapObjects 47 }
apSpectralInfoFreq OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"spectral freq, trap bind var."
::= { apFSAlarmTrapObjects 48 }
apSpectralInfoRssi OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"spectral rssi, trap bind var."
::= { apFSAlarmTrapObjects 49 }
apCounterMeasureApMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the mac of ap which counters the wlan, trap bind var."
::= { apFSAlarmTrapObjects 50 }
apCounterMeasureBssid OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the bssid which is countered, trap bind var."
::= { apFSAlarmTrapObjects 51 }
apApName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current AP name"
::= { apFSAlarmTrapObjects 52 }
apApLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current AP location"
::= { apFSAlarmTrapObjects 53 }
apApUptime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current AP uptime duration(in seconds)"
::= { apFSAlarmTrapObjects 54 }
apApUserNum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STA number on current AP"
::= { apFSAlarmTrapObjects 55 }
apApChannel2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current AP 2.4G channel. Multiple channels are shown as [1,2,3] etc."
::= { apFSAlarmTrapObjects 56 }
apApChannel5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"current AP 5.8G channel. Multiple channels are shown as [153,157,161] etc."
::= { apFSAlarmTrapObjects 57 }
apSsidName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ssid Name"
::= { apFSAlarmTrapObjects 58 }
apSsidIndex OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ssid index in channel, format [channel:index], channel 0 for 2.4G, 1 for 5.8G"
::= { apFSAlarmTrapObjects 59 }
apSsidDot11Auth OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ssid dot11 authenticate mode 0:opensystem 1:sharedkey."
::= { apFSAlarmTrapObjects 60 }
apSsidSecurityMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ssid security mode config 0:none 1:wpa 2:wpa2 3:wapi."
::= { apFSAlarmTrapObjects 61 }
apSsidAuthenMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"dot11 authen mode 0:none 1:PSK 2:Radius 3:WAPICER 4:Web 5:PSK-Web 6:WAPICER-Web 7:WAPIPSK."
::= { apFSAlarmTrapObjects 62 }
webAuthTlvCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WebAuthTlvCount is number of tlv to send."
::= { apFSAlarmTrapObjects 63 }
webAuthTlvString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WebAuthTlvString is trap string to send."
::= { apFSAlarmTrapObjects 64 }
--**************************************************
--* apFSTrapObjects ends *
--**************************************************
apSystemInfoConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 1 }
apGeneralInfoConfigObjects OBJECT IDENTIFIER ::= { apSystemInfoConfigObjects 1 }
apGeneralInfoReadObjects OBJECT IDENTIFIER ::= { apSystemInfoConfigObjects 2 }
apGeneralStatusCFGObjects OBJECT IDENTIFIER ::= { apSystemInfoConfigObjects 3 }
--**************************************************
--* apGeneralInfoConfigObjects begins *
--**************************************************
apGeneralInfoConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApGeneralInfoConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information configure table."
::={ apGeneralInfoConfigObjects 1 }
apGeneralInfoConfigTableEntry OBJECT-TYPE
SYNTAX ApGeneralInfoConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information configure table."
INDEX { fsApMacAddr }
::= { apGeneralInfoConfigTable 1 }
ApGeneralInfoConfigTableEntry ::=
SEQUENCE {
apSysNEId DisplayString,
apSysName DisplayString,
apStatWindowTime TimeTicks,
apSampleTime Counter32,
apRtCollectOnoff INTEGER,
apSysRestart INTEGER,
apSysReset INTEGER
}
apSysNEId OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network elements encoding of AP, unifiedly defined by
China Mobile. It's length is not less than 16."
::= { apGeneralInfoConfigTableEntry 1 }
apSysName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The AP device name, in line with the naming
convention of China Mobile. It's length will not be
longer than 40."
::= { apGeneralInfoConfigTableEntry 2 }
apStatWindowTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"cpu statistics time set,the units is second,max is 15 minute."
::= { apGeneralInfoConfigTableEntry 3 }
apSampleTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap sample time set,mini is 2 Second."
::= { apGeneralInfoConfigTableEntry 4 }
apRtCollectOnoff OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Real-time collection of ap is enabled, 1:on 0:off."
::= { apGeneralInfoConfigTableEntry 5 }
apSysRestart OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
restart(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"restaet system config,0: normal 1:restart."
::= { apGeneralInfoConfigTableEntry 6 }
apSysReset OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"rest system config to default config, 0:normal 1:reset ."
::= { apGeneralInfoConfigTableEntry 7 }
--**************************************************
--* apGeneralInfoConfigObjects ends *
--**************************************************
--**************************************************
--* apGeneralInfoReadObjects starts *
--**************************************************
apGeneralCfgInfoReadTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApGeneralCfgInfoReadTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information read."
::={ apGeneralInfoReadObjects 1 }
apGeneralCfgInfoReadTableEntry OBJECT-TYPE
SYNTAX ApGeneralCfgInfoReadTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information configure table."
INDEX { fsApMacAddr }
::= { apGeneralCfgInfoReadTable 1 }
ApGeneralCfgInfoReadTableEntry ::=
SEQUENCE {
apSysDescr DisplayString,
apSysManufacture DisplayString,
apSerialNumber DisplayString,
apSysModel DisplayString,
apSysUpTime Counter32,
apSysOnlineTime Counter32,
apSysIPAddress IpAddress,
apSysIPNetMask IpAddress,
apSysGateWayAddr IpAddress,
apSysMacAddrConnectToAC MacAddress,
apSoftwareName DisplayString,
apSoftwareVersion DisplayString,
apSoftwareVendor DisplayString,
apCPUType DisplayString,
apMemoryType DisplayString,
apMemorySize OCTET STRING,
apFlashSize OCTET STRING
}
apSysDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap systerm description detail"
::= { apGeneralCfgInfoReadTableEntry 1 }
apSysManufacture OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap systerm Manufacture "
::= { apGeneralCfgInfoReadTableEntry 2 }
apSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap product serial Number"
::= { apGeneralCfgInfoReadTableEntry 3 }
apSysModel OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap product type Model detail"
::= { apGeneralCfgInfoReadTableEntry 4 }
apSysUpTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The run time of the AP."
::= { apGeneralCfgInfoReadTableEntry 5 }
apSysOnlineTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of the AP connect to AC."
::= { apGeneralCfgInfoReadTableEntry 6 }
apSysIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip of AP."
::= { apGeneralCfgInfoReadTableEntry 7 }
apSysIPNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The netmask of the AP ip"
::= { apGeneralCfgInfoReadTableEntry 8 }
apSysGateWayAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gate way of the AP "
::= { apGeneralCfgInfoReadTableEntry 9 }
apSysMacAddrConnectToAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC interface of AP which connects with AC."
::= { apGeneralCfgInfoReadTableEntry 10 }
apSoftwareName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The software name of the ap system."
::= { apGeneralCfgInfoReadTableEntry 11 }
apSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The software version of the ap system."
::= { apGeneralCfgInfoReadTableEntry 12 }
apSoftwareVendor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The software vendor of the ap system."
::= { apGeneralCfgInfoReadTableEntry 13 }
apCPUType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cpu info of ap system."
::= { apGeneralCfgInfoReadTableEntry 14 }
apMemoryType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The memory and flash type of ap system."
::= { apGeneralCfgInfoReadTableEntry 15 }
apMemorySize OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The capability of the memory size."
::= { apGeneralCfgInfoReadTableEntry 17 }
apFlashSize OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The capability of the flash size."
::= { apGeneralCfgInfoReadTableEntry 18 }
--**************************************************
--* apGeneralInfoReadObjects ends *
--**************************************************
--**************************************************
--* apGeneralStatusCFGObjects starts *
--**************************************************
apGeneralStatusCFGTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApGeneralStatusCFGTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The status of general information read."
::={ apGeneralStatusCFGObjects 1 }
apGeneralStatusCFGTableEntry OBJECT-TYPE
SYNTAX ApGeneralStatusCFGTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information configure table."
INDEX { apAssoStatusAPMac }
::= { apGeneralStatusCFGTable 1 }
ApGeneralStatusCFGTableEntry ::=
SEQUENCE {
apAPName DisplayString,
apACAssociateStatus INTEGER,
apMonitorMode INTEGER,
apAssoStatusAPMac MacAddress,
apACHbAssocStatus INTEGER,
apScanType INTEGER,
apAssocTimes Counter32,
apAssocSuccessTimes Counter32,
apAssocFailTimes Counter32,
ap24GSignalStrength INTEGER,
ap5GSignalStrength INTEGER,
apTotalRxBytes Counter64,
apTotalTxBytes Counter64
}
apAPName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP name"
::= { apGeneralStatusCFGTableEntry 1 }
apACAssociateStatus OBJECT-TYPE
SYNTAX INTEGER {
associate(1),
deassociate(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP associate AC states string
1:associated 0:deassociated "
::= { apGeneralStatusCFGTableEntry 2 }
apMonitorMode OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
monitor(1),
semiMonitor(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap monitor mode 0:normal 1:monitor 2:SemiMonitor."
::= { apGeneralStatusCFGTableEntry 3 }
apAssoStatusAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP MAC"
::= { apGeneralStatusCFGTableEntry 4 }
apACHbAssocStatus OBJECT-TYPE
SYNTAX INTEGER {
associate(1),
deassociate(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP associate back-up AC states string
1:associated 0:deassociated "
::= { apGeneralStatusCFGTableEntry 5 }
apScanType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AP scan type
1:scan working channel 0:scan_all "
::= { apGeneralStatusCFGTableEntry 6 }
apAssocTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP assoc times"
::= { apGeneralStatusCFGTableEntry 7 }
apAssocSuccessTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP assoc success times"
::= { apGeneralStatusCFGTableEntry 8 }
apAssocFailTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP assoc fail times"
::= { apGeneralStatusCFGTableEntry 9 }
ap24GSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP 2.4g signal strength"
::= { apGeneralStatusCFGTableEntry 10 }
ap5GSignalStrength OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP 5g signal strength"
::= { apGeneralStatusCFGTableEntry 11 }
apTotalRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP total rx bytes"
::= { apGeneralStatusCFGTableEntry 12 }
apTotalTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP total tx bytes"
::= { apGeneralStatusCFGTableEntry 13 }
--**************************************************
--* apGeneralStatusCFGObjects ends *
--**************************************************
apInterfaceConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 2 }
apInterfaceNumberObjects OBJECT IDENTIFIER ::= { apInterfaceConfigObjects 1 }
apInterfaceRGMIIcfgObjects OBJECT IDENTIFIER ::= { apInterfaceConfigObjects 2 }
apInterfaceWirelesscfgObjects OBJECT IDENTIFIER ::= { apInterfaceConfigObjects 3 }
--**************************************************
--* apInterfaceConfig starts *
--**************************************************
apInterfaceNumberTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApInterfaceNumberTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface number of ap."
::={ apInterfaceNumberObjects 1 }
apInterfaceNumberTableEntry OBJECT-TYPE
SYNTAX ApInterfaceNumberTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface number of ap."
INDEX { fsApMacAddr }
::= { apInterfaceNumberTable 1 }
ApInterfaceNumberTableEntry ::=
SEQUENCE {
apIfNumber INTEGER,
apBSSIDNum INTEGER
}
apIfNumber OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the physical interfaces of ap."
::= { apInterfaceNumberTableEntry 1 }
apBSSIDNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bssid number of ap."
::= { apInterfaceNumberTableEntry 2 }
--**************************************************
--* apInterfaceRGMIIConfig starts *
--**************************************************
apInterfaceRGMIIconfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApInterfaceRGMIIconfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface RGMII config of ap."
::={ apInterfaceRGMIIcfgObjects 1 }
apInterfaceRGMIIconfigTableEntry OBJECT-TYPE
SYNTAX ApInterfaceRGMIIconfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface RGMII config of ap"
INDEX { fsApMacAddr,apIfLocalRGMIINum }
::= { apInterfaceRGMIIconfigTable 1 }
ApInterfaceRGMIIconfigTableEntry ::=
SEQUENCE {
apIfLocalRGMIINum INTEGER,
apIfRGMIIDescr DisplayString,
apIfRGMIIType IANAifType,
apIfRGMIIMtu INTEGER,
apIfRGMIISpeed Integer32,
apIfRGMIIPhysAddress MacAddress,
apIfRGMIIAdminStatusEnable INTEGER,
apIfRGMIIOperStatus INTEGER,
apIfRGMIILastChange TimeTicks
}
apIfLocalRGMIINum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"rgmii interface number."
::= { apInterfaceRGMIIconfigTableEntry 1}
apIfRGMIIDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the ap interfaces."
::= { apInterfaceRGMIIconfigTableEntry 2 }
apIfRGMIIType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The style of the ap interfaces."
::= { apInterfaceRGMIIconfigTableEntry 3 }
apIfRGMIIMtu OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max mtu of the ap interfaces."
::= { apInterfaceRGMIIconfigTableEntry 4 }
apIfRGMIISpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The speed of the ap interfaces."
::= { apInterfaceRGMIIconfigTableEntry 5 }
apIfRGMIIPhysAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical address of the ap interfaces."
::= { apInterfaceRGMIIconfigTableEntry 6 }
apIfRGMIIAdminStatusEnable OBJECT-TYPE
SYNTAX INTEGER {
admindown(0),
up(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RGMII manage enable ,0 admindown 1 up."
::= { apInterfaceRGMIIconfigTableEntry 7 }
apIfRGMIIOperStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
admindown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of RGMII manage 0:down 1:up 2:admindown"
::= { apInterfaceRGMIIconfigTableEntry 8 }
apIfRGMIILastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time ap status in now status."
::= { apInterfaceRGMIIconfigTableEntry 9 }
--**************************************************
--* apInterfaceRGMIIConfig ends *
--**************************************************
--**************************************************
--* apInterfaceWirelsessConfig starts *
--**************************************************
apInterfaceWirelessconfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApInterfaceWirelessconfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface of Wireless config of ap."
::={ apInterfaceWirelesscfgObjects 1 }
apInterfaceWirelessconfigTableEntry OBJECT-TYPE
SYNTAX ApInterfaceWirelessconfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface RGMII config of ap"
INDEX { fsApMacAddr,fsApCfgRadioId }
::= { apInterfaceWirelessconfigTable 1 }
ApInterfaceWirelessconfigTableEntry ::=
SEQUENCE {
apIfWireDescr DisplayString,
apIfWireType IANAifType,
apIfWireMtu Integer32,
apIfWireSpeed Integer32,
apIfWirePhysAddress MacAddress,
apIfWireAdminStatusEnable INTEGER,
apIfWireOperStatus INTEGER,
apIfWireLastChange TimeTicks,
apIfWireChannelAutoSelectEnable INTEGER,
apIfWireRadioChannelConfig INTEGER,
apIfWireRadioChannelUsing INTEGER,
apIfWireCurrRadioModeSupport Counter32,
apIfWireRadioModeConfig Counter32,
apIfWireTransmitSpeedConfig DisplayString,
apIfWireMaxTxPwrLvl DisplayString,
apIfWirePwrAttRange INTEGER,
apIfWirePwrAttValue INTEGER,
apIfWireAntennaGain INTEGER,
apIfWirePowerMgmtEnable TruthValue,
apTxPwr INTEGER,
apIfWireMaxStationNumPermitted Counter32,
apIfWireAMPDUEnabled INTEGER,
apIfWireBWMode INTEGER,
apIfWireShortGIEnabled INTEGER,
apIfWireIs11nOnly TruthValue,
apIfWireBeaconIntvl Integer32,
apIfWireDtimIntvl Integer32,
apIfWireRtsThreshold Integer32,
apIfWireFragThreshlod Integer32,
apIfWirePreambleLen INTEGER,
apAntennaReceiveMask INTEGER,
apAntennaTransmitMask INTEGER,
apIfWireAMSDUEnabled INTEGER,
apIfwireMcsSuppIndex INTEGER,
apIfwireMcsMandIndex INTEGER,
apIfwire11nSuppEnable INTEGER,
apShtRetryThld INTEGER,
apLongRetryThld INTEGER,
apIfWireResponseRssi INTEGER,
apIfWireMaxStationLimit INTEGER,
apIfWireLinkscan INTEGER
}
apIfWireDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the ap interfaces."
::= { apInterfaceWirelessconfigTableEntry 1 }
apIfWireType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The style of the ap interfaces."
::= { apInterfaceWirelessconfigTableEntry 2 }
apIfWireMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max mtu of the ap interfaces."
::= { apInterfaceWirelessconfigTableEntry 3 }
apIfWireSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The speed of the ap interfaces."
::= { apInterfaceWirelessconfigTableEntry 4 }
apIfWirePhysAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical address of the ap interfaces."
::= { apInterfaceWirelessconfigTableEntry 5 }
apIfWireAdminStatusEnable OBJECT-TYPE
SYNTAX INTEGER {
up(0),
admindown(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RGMII manage enable ,0 up 2 admindown."
::= { apInterfaceWirelessconfigTableEntry 6 }
apIfWireOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(0),
down(1),
admindown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of RGMII manage 0:up 1:exception down 2:admindown"
::= { apInterfaceWirelessconfigTableEntry 7 }
apIfWireLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time ap status in now status."
::= { apInterfaceWirelessconfigTableEntry 8 }
apIfWireChannelAutoSelectEnable OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radio Channel Auto Select Enable 1:on 0:off"
::= { apInterfaceWirelessconfigTableEntry 9 }
apIfWireRadioChannelConfig OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radio Channel Manual config"
::= { apInterfaceWirelessconfigTableEntry 10 }
apIfWireRadioChannelUsing OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radio Channel current used"
::= { apInterfaceWirelessconfigTableEntry 11 }
apIfWireCurrRadioModeSupport OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ap support radio mode."
::= { apInterfaceWirelessconfigTableEntry 12 }
apIfWireRadioModeConfig OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ap radio mode configure."
::= { apInterfaceWirelessconfigTableEntry 13 }
apIfWireTransmitSpeedConfig OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The transmit speed of the ap config."
::= { apInterfaceWirelessconfigTableEntry 14 }
apIfWireMaxTxPwrLvl OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max Tx power Level config."
::= { apInterfaceWirelessconfigTableEntry 15 }
apIfWirePwrAttRange OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Tx Power attenuation range of ap radio "
::= { apInterfaceWirelessconfigTableEntry 16 }
apIfWirePwrAttValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Radio Tx Power attenuation value config"
::= { apInterfaceWirelessconfigTableEntry 17 }
apIfWireAntennaGain OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Radio Antenna Gain"
::= { apInterfaceWirelessconfigTableEntry 18 }
apIfWirePowerMgmtEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Tx Power Auto mangement config "
::= { apInterfaceWirelessconfigTableEntry 19 }
apTxPwr OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Tx power"
::= { apInterfaceWirelessconfigTableEntry 20 }
apIfWireMaxStationNumPermitted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max permit station Num configure."
::= { apInterfaceWirelessconfigTableEntry 21 }
apIfWireAMPDUEnabled OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The A-MPDU enable ,used for 11n, 0:off 1:on"
::= { apInterfaceWirelessconfigTableEntry 22 }
apIfWireBWMode OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The radio bandwith mode set 20M/40M ,1:on 0:off"
::= { apInterfaceWirelessconfigTableEntry 23 }
apIfWireShortGIEnabled OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The short GI enable ,used for 11n. 1:on 0:off"
::= { apInterfaceWirelessconfigTableEntry 24 }
apIfWireIs11nOnly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The only used for 11n config ."
::= { apInterfaceWirelessconfigTableEntry 25 }
apIfWireBeaconIntvl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AP beacon interval time config ,default 100 microsecond."
::= { apInterfaceWirelessconfigTableEntry 26 }
apIfWireDtimIntvl OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AP Dtim information interval time config."
::= { apInterfaceWirelessconfigTableEntry 27 }
apIfWireRtsThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AP RTX threshold config."
::= { apInterfaceWirelessconfigTableEntry 28 }
apIfWireFragThreshlod OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MSDU Frag Threshlod config."
::= { apInterfaceWirelessconfigTableEntry 29 }
apIfWirePreambleLen OBJECT-TYPE
SYNTAX INTEGER {
long(0),
short(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AP preamble mode config, 0:long 1:short"
::= { apInterfaceWirelessconfigTableEntry 30 }
apAntennaReceiveMask OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Antenna receive mask."
::= { apInterfaceWirelessconfigTableEntry 31 }
apAntennaTransmitMask OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Antenna transmit mask."
::= { apInterfaceWirelessconfigTableEntry 32 }
apIfWireAMSDUEnabled OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap wireless AMSDU Enable."
::= { apInterfaceWirelessconfigTableEntry 33 }
apIfwireMcsSuppIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap wireless Support Mcs Index."
::= { apInterfaceWirelessconfigTableEntry 34 }
apIfwireMcsMandIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap wireless Mandory Mcs Index."
::= { apInterfaceWirelessconfigTableEntry 35 }
apIfwire11nSuppEnable OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap wireless 11nsupport enable."
::= { apInterfaceWirelessconfigTableEntry 36 }
apShtRetryThld OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap wireless short retry times."
::= { apInterfaceWirelessconfigTableEntry 37 }
apLongRetryThld OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap wireless long retry times."
::= { apInterfaceWirelessconfigTableEntry 38 }
apIfWireResponseRssi OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap radio response rssi."
::= { apInterfaceWirelessconfigTableEntry 39 }
apIfWireMaxStationLimit OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap radio limit the num of associated stations."
::= { apInterfaceWirelessconfigTableEntry 40 }
apIfWireLinkscan OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap radio link scan."
::= { apInterfaceWirelessconfigTableEntry 41 }
--**************************************************
--* apInterfaceWirelsessConfig ends *
--**************************************************
--**************************************************
--* apSSIDConfig starts *
--**************************************************
apSSIDConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 3 }
--**********************************************
--* apSSIDListCreateTable starts
--**********************************************
apSSIDListCreateTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApSSIDListCreateTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SSID list manegment for ap."
::={ apSSIDConfigObjects 1 }
apSSIDListCreateTableEntry OBJECT-TYPE
SYNTAX ApSSIDListCreateTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SSID list manegment for ap"
INDEX {apSSIDAPMac, apSSIDRadioId, fsApgWlanId}
::= { apSSIDListCreateTable 1 }
ApSSIDListCreateTableEntry ::=
SEQUENCE {
apSSIDAPMac MacAddress,
apSSIDRadioId INTEGER,
apSSIDListName DisplayString,
apListBSSIDAddr MacAddress,
apSSIDListStatus RowStatus
}
apSSIDAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP mac address"
::= { apSSIDListCreateTableEntry 1 }
apSSIDRadioId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ssid connect radio index num."
::= { apSSIDListCreateTableEntry 2}
apSSIDListName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID name."
::= { apSSIDListCreateTableEntry 3}
apListBSSIDAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"config bssid virtual mac address"
::= { apSSIDListCreateTableEntry 4 }
apSSIDListStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status column used for creating and
deleting instances of the columnar objects in the table."
::= { apSSIDListCreateTableEntry 5}
--**********************************************
--*apSSIDListCreateTable ends
--**********************************************
apSSIDConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApSSIDConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SSID config of ap."
::={ apSSIDConfigObjects 2 }
apSSIDConfigTableEntry OBJECT-TYPE
SYNTAX ApSSIDConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SSID config of ap"
INDEX { fsApgWlanId }
::= { apSSIDConfigTable 1 }
ApSSIDConfigTableEntry ::=
SEQUENCE {
apSSIDName DisplayString,
apSSIDEnabled TruthValue,
apSSIDHidden TruthValue,
apStaIsolate TruthValue,
apDot11Auth INTEGER,
apsecurityMode INTEGER,
apAuthenMode INTEGER,
apSecurityCiphers INTEGER,
apVlanId INTEGER,
apVlanIpAddr IpAddress,
apMaxSimultUsers Counter32,
apStaUplinkMaxRate Counter32,
apStaDwlinkMaxRate Counter32,
apSSIDCfgStatus RowStatus
}
apSSIDName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"config ssid name"
::= { apSSIDConfigTableEntry 1 }
apSSIDEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ssid enable config "
::= { apSSIDConfigTableEntry 2 }
apSSIDHidden OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ssid hidden config "
::= { apSSIDConfigTableEntry 3 }
apStaIsolate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"station isolate config "
::= { apSSIDConfigTableEntry 4 }
apDot11Auth OBJECT-TYPE
SYNTAX INTEGER {
opensystem(0),
sharedkey(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"dot11 authenticate mode 0:opensystem 1:sharedkey."
::= { apSSIDConfigTableEntry 5}
apsecurityMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
wpa(1),
wpa2(2),
wapi(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"security mode config 0:none 1:wpa
2:wpa2 3:wapi."
::= { apSSIDConfigTableEntry 6}
apAuthenMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
psk(1),
radius(2),
wapicer(3),
web(4),
psk-web(5),
wapicer-web(6),
wapipsk(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"dot11 authen mode 0:none 1:PSK 2:Radius 3:WAPICER 4:Web 5:PSK-Web 6:WAPICER-Web 7:WAPIPSK."
::= { apSSIDConfigTableEntry 7}
apSecurityCiphers OBJECT-TYPE
SYNTAX INTEGER {
none(0),
wep40(1),
wep104(2),
tkip(3),
aesccmp(4),
wapisms4(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"SecurityCiphers config 0:none 1:wep40
2:wep104 3:aesccmp 4:wpi-SMS4."
::= { apSSIDConfigTableEntry 8}
apVlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vlan id config"
::= { apSSIDConfigTableEntry 9}
apVlanIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vlan ip address"
::= { apSSIDConfigTableEntry 10}
apMaxSimultUsers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"AP max station support config."
::= { apSSIDConfigTableEntry 11 }
apStaUplinkMaxRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"AP station Uplink MaxRate."
::= { apSSIDConfigTableEntry 12 }
apStaDwlinkMaxRate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"AP station Dwlink MaxRate."
::= { apSSIDConfigTableEntry 13 }
apSSIDCfgStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status column used for creating and
deleting instances of the columnar objects in the table."
::= { apSSIDConfigTableEntry 14 }
--**************************************************
--* apSSIDConfig ends *
--**************************************************
--**************************************************
--* apSecurityConfig starts *
--**************************************************
apSecurityConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 4 }
apSecurityConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApSecurityConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SSID config of ap."
::={ apSecurityConfigObjects 1 }
apSecurityConfigTableEntry OBJECT-TYPE
SYNTAX ApSecurityConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SSID config of ap"
INDEX { fsApgWlanId }
::= { apSecurityConfigTable 1 }
ApSecurityConfigTableEntry ::=
SEQUENCE {
apWEPCipherKeyIndex INTEGER,
apWEPCipherKeyValue DisplayString,
apWEPCipherKeyCharType INTEGER,
apPSKCipherKeyValue DisplayString,
apPSKCipherKeyCharType INTEGER,
apWAPIAuthModeEnable TruthValue,
apWAPIASIPAddress IpAddress,
apWAPIIsInstalledCer TruthValue
}
apWEPCipherKeyIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WEP CipherKey Index"
::= { apSecurityConfigTableEntry 1}
apWEPCipherKeyValue OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WEP cipherKey value ."
::= { apSecurityConfigTableEntry 2 }
apWEPCipherKeyCharType OBJECT-TYPE
SYNTAX INTEGER {
char(1),
hex(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WEP CipherKey type 0:char 1:hex ."
::= { apSecurityConfigTableEntry 3}
apPSKCipherKeyValue OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PSK cipherKey value ."
::= { apSecurityConfigTableEntry 4 }
apPSKCipherKeyCharType OBJECT-TYPE
SYNTAX INTEGER {
char(1),
hex(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"PSK CipherKey type 0:char 1:hex ."
::= { apSecurityConfigTableEntry 5}
apWAPIAuthModeEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WAPI auth mode switch. "
::= { apSecurityConfigTableEntry 6 }
apWAPIASIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The WAPI AS ip address "
::= { apSecurityConfigTableEntry 7 }
apWAPIIsInstalledCer OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAPI has installed Cet ?"
::= { apSecurityConfigTableEntry 8 }
--**************************************************
--* apWlanSecurityTable *
--**************************************************
apWlanSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF apWlanSecurityTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AP radio wlan security info table."
::={ apSecurityConfigObjects 2 }
apWlanSecurityTableEntry OBJECT-TYPE
SYNTAX apWlanSecurityTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AP radio wlan security info table."
INDEX { apWlanSecurityAPMac, apWlanSecurityRadioId, apWlanSecurityWlanId }
::= { apWlanSecurityTable 1 }
apWlanSecurityTableEntry ::=
SEQUENCE {
apWlanSecurityAPMac MacAddress,
apWlanSecurityRadioId INTEGER,
apWlanSecurityWlanId INTEGER,
apWlanSecurityAuthenMode INTEGER
}
apWlanSecurityAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap mac."
::= { apWlanSecurityTableEntry 1 }
apWlanSecurityRadioId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"radio id ."
::= { apWlanSecurityTableEntry 2 }
apWlanSecurityWlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wlan id ."
::= { apWlanSecurityTableEntry 3 }
apWlanSecurityAuthenMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap wlan authen mode."
::= { apWlanSecurityTableEntry 4 }
--**************************************************
--* apSecurityConfig ends *
--**************************************************
--**************************************************
--* apWAPIExternInfoConfig starts *
--**************************************************
apWAPIExternInfoConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 5 }
apWAPIExternInfoConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWAPIExternInfoConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The WAPI extern config ."
::={ apWAPIExternInfoConfigObjects 1 }
apWAPIExternInfoConfigTableEntry OBJECT-TYPE
SYNTAX ApWAPIExternInfoConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The WAPI extern config ."
INDEX { fsApgWlanId }
::= { apWAPIExternInfoConfigTable 1 }
ApWAPIExternInfoConfigTableEntry ::=
SEQUENCE {
apWAPIConfigVersion Integer32,
apWAPIControlledAuthControl TruthValue,
apWAPIControlledPortControl INTEGER,
apWAPIOptionImplemented TruthValue,
apWAPIPreauthenticationImplemented TruthValue,
apWAPIEnabled TruthValue,
apWAPIPreauthEnabled TruthValue,
apWAPIUnicastKeysSupported Unsigned32,
apWAPIUnicastRekeyMethod INTEGER,
apWAPIUnicastRekeyTime Unsigned32,
apWAPIUnicastRekeyPackets Unsigned32,
apWAPIMulticastCipher OCTET STRING,
apWAPIMulticastRekeyMethod INTEGER,
apWAPIMulticastRekeyTime Unsigned32,
apWAPIMulticastRekeyPackets Unsigned32,
apWAPIMulticastRekeyStrict TruthValue,
apWAPIPSKValue OCTET STRING,
apWAPIPSKPassPhrase DisplayString,
apWAPICertificateUpdateCount Unsigned32,
apWAPIMulticastUpdateCount Unsigned32,
apWAPIUnicastUpdateCount Unsigned32,
apWAPIMulticastCipherSize Unsigned32,
apWAPIBKLifetime Unsigned32,
apWAPIBKReauthThreshold Unsigned32,
apWAPISATimeout Unsigned32,
apWAPIAuthSuiteSelected OCTET STRING,
apWAPIUnicastCipherSelected OCTET STRING,
apWAPIMulticastCipherSelected OCTET STRING,
apWAPIBKIDUsed OCTET STRING,
apWAPIAuthSuiteRequested OCTET STRING,
apWAPIUnicastCipherRequested OCTET STRING,
apWAPIMulticastCipherRequested OCTET STRING,
apWAPIUnicastCipher OCTET STRING,
apWAPIUnicastCipherEnabled TruthValue,
apWAPIUnicastCipherSize Unsigned32,
apWAPIAuthenticationSuite OCTET STRING,
apWAPIAuthenticationSuiteEnabled TruthValue,
apWAPIAECertFile DisplayString,
apWAPICACertFile DisplayString,
apWAPIASUCertFile DisplayString
}
apWAPIConfigVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" the newest wapi version the entity support. "
::= { apWAPIExternInfoConfigTableEntry 1 }
apWAPIControlledAuthControl OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This attribute means whether the entity enbales identification. If its value is false, it
means it disables identification, the status of the controlled port is 'identified'. If
true, it means it enables identification, the status of the controlled port is decided by
the gb15629dot11wapiControlledPortControl. "
::= { apWAPIExternInfoConfigTableEntry 2 }
apWAPIControlledPortControl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This attribute used as the control type of the entity port, valid when gb15629dot11wapiControlledAuthControl
is true. It mean 'auto' when 0 and the status of control port is decided by the result of
identification. 'force to unidentified' when 1 and the status of control port is 'unidentified'<27><>"
::= { apWAPIExternInfoConfigTableEntry 3 }
apWAPIOptionImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This attribute instruts whether the entity supports the WAPI funtion. It supports the WAPI
funtion when value is true. Or not support. "
::= { apWAPIExternInfoConfigTableEntry 4 }
apWAPIPreauthenticationImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This attribute instruts whether the entity supports the WAPI pre-identification. It can't
be valued true except that gb15629dot11wapiOptionImplemented is valued true. "
::= { apWAPIExternInfoConfigTableEntry 5 }
apWAPIEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" When it is valued true, the object instruts that the WAPI of the entity has been activated.
The entity will broadcast the WAPI info elemnetds by beacon frames and probe response frames. "
::= { apWAPIExternInfoConfigTableEntry 6 }
apWAPIPreauthEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When it is valued true, the object instruts that the WAPI of the entity has been activated.
The object requires thar the dot11WAPI Enabled is also set to true. "
::= { apWAPIExternInfoConfigTableEntry 7 }
apWAPIUnicastKeysSupported OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The object instruts the count of the unicast keys supported by the WAPI entity. "
::= { apWAPIExternInfoConfigTableEntry 8 }
apWAPIUnicastRekeyMethod OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
timeBased(1),
packetBased(2),
timepacket-Based(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The object choosee a mechanism to rebuild USK of WAPI. It is defaultly based on time,
once per day. The update of USK is initialized by the entities which play as the role of AE
or ASUE. "
DEFVAL { timeBased }
::= { apWAPIExternInfoConfigTableEntry 9 }
apWAPIUnicastRekeyTime OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timing-Second of the update of WAPI USK. The timer BEGINS working when the USK is
set by the primitive MLME-SETWPIKEYS.request. "
DEFVAL { 86400 }
::= { apWAPIExternInfoConfigTableEntry 10 }
apWAPIUnicastRekeyPackets OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "1000 packets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The packet count of the update of WAPI USK(unit in 1000 packets). Thr counter BEGINS
working to account the count of the packets which used the current USK, when the USK is set
by the primitive MLME-SETWPIKEYS.request. "
::= { apWAPIExternInfoConfigTableEntry 11 }
apWAPIMulticastCipher OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object instruts the muticast cipher suites which entities should adopt. The unicast
cipher suites of WAPI info-elements should adopt the value of this variable, which includes
three OCTET OUI and an identification of the muticast cipher suites. "
::= { apWAPIExternInfoConfigTableEntry 12 }
apWAPIMulticastRekeyMethod OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
timeBased(1),
packetBased(2),
timepacket-Based(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object choosee a mechanism to rebuild MSK of WAPI. It is defaultly timebased, once per
day. The update of MSK is initialized by the entity which play the role of AE. "
DEFVAL { timeBased }
::= { apWAPIExternInfoConfigTableEntry 13 }
apWAPIMulticastRekeyTime OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The timing-Second of the update of WAPI MSK. The timer BEGINS working when the MSK is
set by the primitive MLME-SETWPIKEYS.request. "
DEFVAL { 86400 }
::= { apWAPIExternInfoConfigTableEntry 14 }
apWAPIMulticastRekeyPackets OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "1000 packets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The packet count of the update of WAPI MSK(unit in 1000 packets). Thr counter BEGINS
working to account the count of the packets which used the current MSK, when the MSK is set
by the primitive MLME-SETWPIKEYS.request. "
::= { apWAPIExternInfoConfigTableEntry 15}
apWAPIMulticastRekeyStrict OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The object will send signal to notify that the MSK need update, whenever the STA leave the
BSS which owns MSK. "
::= { apWAPIExternInfoConfigTableEntry 16 }
apWAPIPSKValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Choose the PSK of the AKM suite of WAPI as the module of PSK. BK will be derivated by this
object. This object is logically write-only. Reading the variable will return the status of
unsuccessfull, meaningless or 0. "
::= { apWAPIExternInfoConfigTableEntry 17 }
apWAPIPSKPassPhrase OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Choose the PSK of the AKM suite of WAPI as the module of PSK. BK is set by
gb15629dot11wapiConfigPSKValue. Another alternative method is that using password-key
algorithm to set PSK. This variable provides a way to enter a password. When the object is
being writen, WAPI entity will use the password - key algorithm to export a pre-shared key,
at the same time, it fill the gb15629dot11wapiConfigPSKValue with the pre-shared key. This
object is logically write-only. Reading the variable will return the status of unsuccessfull,
meaningless or 0. "
::= { apWAPIExternInfoConfigTableEntry 18 }
apWAPICertificateUpdateCount OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" In each handshake of the identification of each certificate, retrans of WAPI certificate
identification handshake protocol messages. "
DEFVAL { 3 }
::= { apWAPIExternInfoConfigTableEntry 19 }
apWAPIMulticastUpdateCount OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" In each handshake of MSK, retrans of WAPI muticast key handshake protocol messages. "
DEFVAL { 3 }
::= { apWAPIExternInfoConfigTableEntry 20 }
apWAPIUnicastUpdateCount OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The retrans of the WAPI unicast key handshake protocol messages in the three times
handshakes. "
DEFVAL { 3 }
::= { apWAPIExternInfoConfigTableEntry 21 }
apWAPIMulticastCipherSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The object instruts the bits of the muticast key. For example SMS4, the length should be
256. A 128-bit encryption keys for the front, followed by 128-bit key for the integrity
check. "
::= { apWAPIExternInfoConfigTableEntry 22 }
apWAPIBKLifetime OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" At the buffering of BK, the maximum lifetime of a BK. "
DEFVAL { 43200 }
::= { apWAPIExternInfoConfigTableEntry 23 }
apWAPIBKReauthThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
UNITS "percentage"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Before the re-certification identification, the percentage of survival of the BK
should be preceded."
::= { apWAPIExternInfoConfigTableEntry 24 }
apWAPISATimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
UNITS "second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The maximum time neededto establish Security association. "
DEFVAL { 60 }
::= { apWAPIExternInfoConfigTableEntry 25 }
apWAPIAuthSuiteSelected OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" AKM suite of the last consultation. "
::= { apWAPIExternInfoConfigTableEntry 26 }
apWAPIUnicastCipherSelected OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Unicast cipher suites of the last consultation. "
::= { apWAPIExternInfoConfigTableEntry 27 }
apWAPIMulticastCipherSelected OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Muticast cipher suites of the last consultation."
::= { apWAPIExternInfoConfigTableEntry 28 }
apWAPIBKIDUsed OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The BKID used in the process of last unicast key handshake. "
::= { apWAPIExternInfoConfigTableEntry 29 }
apWAPIAuthSuiteRequested OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" AKM suite of the last requirements. "
::= { apWAPIExternInfoConfigTableEntry 30 }
apWAPIUnicastCipherRequested OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Unicast cipher suites of the last requirements. "
::= { apWAPIExternInfoConfigTableEntry 31 }
apWAPIMulticastCipherRequested OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Muticast cipher suites of the last requirements. "
::= { apWAPIExternInfoConfigTableEntry 32 }
apWAPIUnicastCipher OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" wapi select Unicast encrypt. "
::= { apWAPIExternInfoConfigTableEntry 33 }
apWAPIUnicastCipherEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" wapi Unicast encrypt enable. "
::= { apWAPIExternInfoConfigTableEntry 34 }
apWAPIUnicastCipherSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" wapi Unicast encrypt bit len. "
::= { apWAPIExternInfoConfigTableEntry 35 }
apWAPIAuthenticationSuite OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" wapi select AKM . "
::= { apWAPIExternInfoConfigTableEntry 36 }
apWAPIAuthenticationSuiteEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" wapi AKM encrypt enable. "
::= { apWAPIExternInfoConfigTableEntry 37 }
apWAPIAECertFile OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" the file name of AE cert in WAPI. "
::= { apWAPIExternInfoConfigTableEntry 38 }
apWAPICACertFile OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" the file name of CA cert in WAPI."
::= { apWAPIExternInfoConfigTableEntry 39 }
apWAPIASUCertFile OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" the file name of ASU cert in WAPI. "
::= { apWAPIExternInfoConfigTableEntry 40 }
--**************************************************
--* apWAPIExternInfoConfig ends *
--**************************************************
--**************************************************
--* apStationInfoGet starts *
--**************************************************
apStationInfoGetObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 6 }
apStationInfoGetTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApStationInfoGetTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SSID config of ap."
::={ apStationInfoGetObjects 1 }
apStationInfoGetTableEntry OBJECT-TYPE
SYNTAX ApStationInfoGetTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SSID config of ap"
INDEX { fsStaMacAddr }
::= { apStationInfoGetTable 1 }
ApStationInfoGetTableEntry ::=
SEQUENCE {
apStaMAC MacAddress,
apStaWMMAttr INTEGER,
apStaIPAddress IpAddress,
apStaRadioMode INTEGER,
apStaRadioChannel INTEGER,
apAPTxRates INTEGER,
apStaPowerSaveMode INTEGER,
apStaVlanId Counter32,
apStaSSIDName DisplayString,
apAPId INTEGER,
apStaDot11Auth INTEGER,
apsecurity INTEGER,
apStaAuthenMode INTEGER,
apStaSecurityCiphers INTEGER,
apAPIdMac MacAddress,
apStaMode INTEGER,
apStaBand INTEGER
}
apStaMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station mac addr number."
::= { apStationInfoGetTableEntry 1}
apStaWMMAttr OBJECT-TYPE
SYNTAX INTEGER {
wmmsta(1),
nonwmmsta(0)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QOS config support 0:WMMSta 1:NonWMMSta Index number."
::= { apStationInfoGetTableEntry 2}
apStaIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station ip address."
::= { apStationInfoGetTableEntry 3}
apStaRadioMode OBJECT-TYPE
SYNTAX INTEGER {
dot11a(0),
dot11b(1),
dot11g(2),
dot11n(3),
dot11ac(4),
dot11ax(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station radio mode 0:dot11a 1:dot11b
2:dot11g 3:dot11n 4:dot11ac 5:dot11ax"
::= { apStationInfoGetTableEntry 4}
apStaRadioChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station radio channel "
::= { apStationInfoGetTableEntry 5}
apAPTxRates OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station current rate "
::= { apStationInfoGetTableEntry 6}
apStaPowerSaveMode OBJECT-TYPE
SYNTAX INTEGER {
active(0),
powersave(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station power States 0:Active 1:Powersave ."
::= { apStationInfoGetTableEntry 7}
apStaVlanId OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station vlan id ."
::= { apStationInfoGetTableEntry 8}
apStaSSIDName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station name ."
::= { apStationInfoGetTableEntry 9}
apAPId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap id which station connectted ."
::= { apStationInfoGetTableEntry 10}
apStaDot11Auth OBJECT-TYPE
SYNTAX INTEGER {
opensystem(0),
sharedkey(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station dot11 auth 0:opensystem 1:sharedkey."
::= { apStationInfoGetTableEntry 11}
apsecurity OBJECT-TYPE
SYNTAX INTEGER {
none(0),
wpa(1),
wpa2(2),
wapi(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station dot11 apsecurity 0:none 1:wpa 2:wpa2 3:wapi."
::= { apStationInfoGetTableEntry 12}
apStaAuthenMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
psk(1),
radius(2),
wapicer(3),
web(4),
psk-web(5),
wapicer-web(6),
wapipsk(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station AuthenMode 0:none 1:PSK 2:Radius 3:WAPICER 4:Web 5:PSK-Web 6:WAPICER-Web 7:WAPIPSK."
::= { apStationInfoGetTableEntry 13}
apStaSecurityCiphers OBJECT-TYPE
SYNTAX INTEGER {
none(0),
wep40(1),
wep104(2),
tkip(3),
aesccmp(4),
wpisms4(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station SecurityCiphers 0:none 1:wep40
2:wep104 3:tkip 4:aesccmp 5:wpi-SMS4"
::= { apStationInfoGetTableEntry 14}
apAPIdMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Mac which station connectted ."
::= { apStationInfoGetTableEntry 15}
apStaMode OBJECT-TYPE
SYNTAX INTEGER {
dot11a(1),
dot11b(2),
dot11g(4),
dot11an(8),
dot11gn(16),
dot11ac(32),
dot11ax(64)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"1:dot11a 2:dot11b 4:dot11g 8:dot11an 16:dot11gn 32:dot11ac 64:dot11ax"
::= { apStationInfoGetTableEntry 16}
apStaBand OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sta band 0:2.4G 1:5G"
::= { apStationInfoGetTableEntry 17}
--**************************************************
--* apStationInfoGet ends *
--**************************************************
--**************************************************
--* apStationRefusedAccess starts *
--**************************************************
apStationRefusedAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApStationRefusedAccessTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The refused accessed STA infomation."
::={ apStationInfoGetObjects 2 }
apStationRefusedAccessTableEntry OBJECT-TYPE
SYNTAX ApStationRefusedAccessTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The refused accessed STA infomation."
INDEX { apRefusedStaMAC }
::= { apStationRefusedAccessTable 1 }
ApStationRefusedAccessTableEntry ::=
SEQUENCE {
apRefusedStaMAC MacAddress,
apFailReason INTEGER,
apRefusedTime DisplayString,
apRefusedAPMac MacAddress
}
apRefusedStaMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Refused station MAC."
::= { apStationRefusedAccessTableEntry 1}
apFailReason OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sation refused reason."
::= { apStationRefusedAccessTableEntry 2}
apRefusedTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sation refused time"
::= { apStationRefusedAccessTableEntry 3}
apRefusedAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sation refused AP MAC"
::= { apStationRefusedAccessTableEntry 4}
--**************************************************
--* apStationRefusedAccess ends *
--**************************************************
--**************************************************
--* apStationRadiusInfoTable starts *
--**************************************************
apStationRadiusInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApStationRadiusInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Stations Radius Auth infomation."
::={ apStationInfoGetObjects 3 }
apStationRadiusInfoTableEntry OBJECT-TYPE
SYNTAX ApStationRadiusInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The refused accessed STA infomation."
INDEX { fsApMacAddr, apUserMacAddress }
::= { apStationRadiusInfoTable 1 }
ApStationRadiusInfoTableEntry ::=
SEQUENCE {
apUserMacAddress MacAddress,
apUserIpAddress IpAddress,
apUserLoginName OCTET STRING,
apUserLoginTime OCTET STRING,
apUserOnlineTime TimeTicks
}
apUserMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User MAC Address."
::= { apStationRadiusInfoTableEntry 1}
apUserIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User Ip Address."
::= { apStationRadiusInfoTableEntry 2}
apUserLoginName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User Login Name"
::= { apStationRadiusInfoTableEntry 3}
apUserLoginTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User Login Time"
::= { apStationRadiusInfoTableEntry 4}
apUserOnlineTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User Online Time"
::= { apStationRadiusInfoTableEntry 5}
--**************************************************
--* apStationRadiusInfoTable ends *
--**************************************************
--**************************************************
--* apStationInfoJsonTable starts *
--**************************************************
apStationInfoJsonTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApStationInfoJsonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap station json table."
::= { apStationInfoGetObjects 4 }
apStationInfoJsonEntry OBJECT-TYPE
SYNTAX ApStationInfoJsonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap station json entry."
INDEX { apStationInfoJsonMacAddr}
::= { apStationInfoJsonTable 1 }
ApStationInfoJsonEntry ::=
SEQUENCE {
apStationInfoJsonMacAddr MacAddress,
apStationInfoJsonContent OCTET STRING
}
apStationInfoJsonMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The STA's mac address."
::= { apStationInfoJsonEntry 1}
apStationInfoJsonContent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..1023))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the sta content with json format."
::= { apStationInfoJsonEntry 2}
--**************************************************
--* apStationInfoJsonTable ends *
--**************************************************
--**************************************************
--* apQOSinfoConfig starts *
--**************************************************
apQOSInfoConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 7 }
apQOSWirelessConfigObjects OBJECT IDENTIFIER ::= { apQOSInfoConfigObjects 1 }
apQOSBaseInfoConfigObjects OBJECT IDENTIFIER ::= { apQOSInfoConfigObjects 2 }
apQOSBackgroundCfgObjects OBJECT IDENTIFIER ::= { apQOSInfoConfigObjects 3 }
apQOSBestEffortCfgObjects OBJECT IDENTIFIER ::= { apQOSInfoConfigObjects 4 }
apQOSVoiceInfoCfgObjects OBJECT IDENTIFIER ::= { apQOSInfoConfigObjects 5 }
apQOSVideoInfoCfgObjects OBJECT IDENTIFIER ::= { apQOSInfoConfigObjects 6 }
apQOSWMMConfigObjects OBJECT IDENTIFIER ::= { apQOSInfoConfigObjects 7 }
--********apQOSWirelessConfig starts****************
apQOSWirelessConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSWirelessConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap wireless QOS parameter config table."
::={ apQOSWirelessConfigObjects 1 }
apQOSWirelessConfigTableEntry OBJECT-TYPE
SYNTAX ApQOSWirelessConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap wireless QOS parameter config table."
INDEX { fsApMacAddr,fsApCfgRadioId,apWireQoSTrafficClassId }
::= { apQOSWirelessConfigTable 1 }
ApQOSWirelessConfigTableEntry ::=
SEQUENCE {
apWireQoSTrafficClassId INTEGER,
apWireQosAIFS INTEGER,
apWireQoSCWmin INTEGER,
apWireQoSCWmax INTEGER,
apWireQoSTXOPLim INTEGER
}
apWireQoSTrafficClassId OBJECT-TYPE
SYNTAX INTEGER {
bestEffort(0),
background(1),
video(2),
voice(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap QOS Service type 0:bestEffort 1:background 2:video 3:voice."
::= { apQOSWirelessConfigTableEntry 1 }
apWireQosAIFS OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS AIFS ."
::= { apQOSWirelessConfigTableEntry 2 }
apWireQoSCWmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS WM min ."
::= { apQOSWirelessConfigTableEntry 3 }
apWireQoSCWmax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS WM max ."
::= { apQOSWirelessConfigTableEntry 4 }
apWireQoSTXOPLim OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS TXOP limit ."
::= { apQOSWirelessConfigTableEntry 5 }
--*************** apQOSWirelessConfig ends **********
--*************** apQOSBaseInfoConfig starts **********
apQOSBaseInfoConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSBaseInfoConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap wireless QOS parameter config table."
::={ apQOSBaseInfoConfigObjects 1 }
apQOSBaseInfoConfigTableEntry OBJECT-TYPE
SYNTAX ApQOSBaseInfoConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap base QOS parameter config table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSBaseInfoConfigTable 1 }
ApQOSBaseInfoConfigTableEntry ::=
SEQUENCE {
apBaseQoSTrafficClass INTEGER,
apBaseQoSEnabled TruthValue,
apBaseQoSBW Integer32,
apBaseQoSResPercent Integer32,
apBaseQoSsharedBW Integer32,
apBaseQoSsharedBWPercent Integer32,
apBaseQoSSchedAlgName DisplayString,
apBaseQoSResPolicyEnabled TruthValue,
apBaseQoSResPolicyName DisplayString,
apBaseQoSBackgroundSvcAvgSpeed Integer32,
apBaseQoSBackgroundSvcMaxBurst Integer32,
apBaseQoSBackgroundSvcPriority Integer32,
apBaseQoSBackgroundSvcResPriority Integer32,
apBaseQoSBestEffortSvcAvgSpeed Integer32,
apBaseQoSBestEffortSvcMaxBurst Integer32,
apBaseQoSBestEffortSvcPriority Integer32,
apBaseQoSBestEffortSvcResPriority Integer32,
apBaseQoSVoiceSvcAvgSpeed Integer32,
apBaseQoSVoiceSvcMaxBurst Integer32,
apBaseQoSVoiceSvcPriority Integer32,
apBaseQoSVoiceSvcResPriority Integer32,
apBaseQoSVideoSvcAvgSpeed Integer32,
apBaseQoSVideoSvcMaxBurst Integer32,
apBaseQoSVideoSvcPriority Integer32,
apBaseQoSVideoSvcResPriority Integer32
}
apBaseQoSTrafficClass OBJECT-TYPE
SYNTAX INTEGER {
background(0),
bestEffort(1),
video(2),
voice(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Base Traffic type 0:background 1:bestEffort 2:video 3:voice."
::= { apQOSBaseInfoConfigTableEntry 1 }
apBaseQoSEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS enable or disable."
::= { apQOSBaseInfoConfigTableEntry 2 }
apBaseQoSBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS base service bandwidth."
::= { apQOSBaseInfoConfigTableEntry 3 }
apBaseQoSResPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS base service Resource percent."
::= { apQOSBaseInfoConfigTableEntry 4 }
apBaseQoSsharedBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS share service bandwidth."
::= { apQOSBaseInfoConfigTableEntry 5 }
apBaseQoSsharedBWPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS share service Resource percent."
::= { apQOSBaseInfoConfigTableEntry 6 }
apBaseQoSSchedAlgName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS service schedule name."
::= { apQOSBaseInfoConfigTableEntry 7 }
apBaseQoSResPolicyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS Resource Policy enable."
::= { apQOSBaseInfoConfigTableEntry 8 }
apBaseQoSResPolicyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS Resource Policy name."
::= { apQOSBaseInfoConfigTableEntry 9 }
apBaseQoSBackgroundSvcAvgSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS background service average speed."
::= { apQOSBaseInfoConfigTableEntry 10 }
apBaseQoSBackgroundSvcMaxBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS background service busrt max speed."
::= { apQOSBaseInfoConfigTableEntry 11 }
apBaseQoSBackgroundSvcPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS background service schedule Priority."
::= { apQOSBaseInfoConfigTableEntry 12 }
apBaseQoSBackgroundSvcResPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS background despoil Priority."
::= { apQOSBaseInfoConfigTableEntry 13 }
apBaseQoSBestEffortSvcAvgSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS BestEffort service average speed."
::= { apQOSBaseInfoConfigTableEntry 14 }
apBaseQoSBestEffortSvcMaxBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS BestEffort service MAX burst speed."
::= { apQOSBaseInfoConfigTableEntry 15 }
apBaseQoSBestEffortSvcPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS BestEffort service schedule Priority."
::= { apQOSBaseInfoConfigTableEntry 16 }
apBaseQoSBestEffortSvcResPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS BestEffort despoil Priority."
::= { apQOSBaseInfoConfigTableEntry 17 }
apBaseQoSVoiceSvcAvgSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS voice service average speed."
::= { apQOSBaseInfoConfigTableEntry 18 }
apBaseQoSVoiceSvcMaxBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS voice service MAX burst speed."
::= { apQOSBaseInfoConfigTableEntry 19 }
apBaseQoSVoiceSvcPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS voice service schedule Priority."
::= { apQOSBaseInfoConfigTableEntry 20 }
apBaseQoSVoiceSvcResPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS voice service despoil Priority."
::= { apQOSBaseInfoConfigTableEntry 21 }
apBaseQoSVideoSvcAvgSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS video service average speed."
::= { apQOSBaseInfoConfigTableEntry 22 }
apBaseQoSVideoSvcMaxBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS video service MAX burst speed."
::= { apQOSBaseInfoConfigTableEntry 23 }
apBaseQoSVideoSvcPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS video service schedule Priority."
::= { apQOSBaseInfoConfigTableEntry 24 }
apBaseQoSVideoSvcResPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Base QOS video service despoil Priority."
::= { apQOSBaseInfoConfigTableEntry 25 }
--*************** apQOSBaseInfoConfig ends **********
--*************** apQOSBackgroundCfg starts **********
apQOSBackgroundCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSBackgroundCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap QOS Background service parameter config table."
::={ apQOSBackgroundCfgObjects 1 }
apQOSBackgroundCfgTableEntry OBJECT-TYPE
SYNTAX ApQOSBackgroundCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap QOS Background service parameter config table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSBackgroundCfgTable 1 }
ApQOSBackgroundCfgTableEntry ::=
SEQUENCE {
apQOSBgMaxSvcCnt Integer32,
apQOSBgSvcBW Integer32,
apQOSBgSvcBWPercent Integer32,
apQOSBgIsUseWREDAlg TruthValue,
apQOSBgIsUseTrafficShaping TruthValue
}
apQOSBgMaxSvcCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS BackGroud service apposition max count."
::= { apQOSBackgroundCfgTableEntry 1 }
apQOSBgSvcBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS BackGroud service bandwidth limit."
::= { apQOSBackgroundCfgTableEntry 2 }
apQOSBgSvcBWPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS BackGroud service bandwidth percent."
::= { apQOSBackgroundCfgTableEntry 3 }
apQOSBgIsUseWREDAlg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS BackGroud service used WRED arithmetic."
::= { apQOSBackgroundCfgTableEntry 4 }
apQOSBgIsUseTrafficShaping OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS BackGroud service used Traffic Shaping."
::= { apQOSBackgroundCfgTableEntry 5 }
--*************** apQOSBackgroundCfg ends **********
--*************** apQOSBestEffortCfg starts **********
apQOSBestEffortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSBestEffortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap QOS BestEffort service parameter config table."
::={ apQOSBestEffortCfgObjects 1 }
apQOSBestEffortCfgTableEntry OBJECT-TYPE
SYNTAX ApQOSBestEffortCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap QOS BestEffort service parameter config table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSBestEffortCfgTable 1 }
ApQOSBestEffortCfgTableEntry ::=
SEQUENCE {
apQOSBeMaxSvcCnt Integer32,
apQOSBeSvcBW Integer32,
apQOSBeSvcBWPercent Integer32,
apQOSBeIsUseWREDAlg TruthValue,
apQOSBeIsUseTrafficShaping TruthValue
}
apQOSBeMaxSvcCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS BestEffort service apposition max count."
::= { apQOSBestEffortCfgTableEntry 1 }
apQOSBeSvcBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS BestEffort service bandwidth limit."
::= { apQOSBestEffortCfgTableEntry 2 }
apQOSBeSvcBWPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS BestEffort service bandwidth percent."
::= { apQOSBestEffortCfgTableEntry 3 }
apQOSBeIsUseWREDAlg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS BestEffort service used WRED arithmetic."
::= { apQOSBestEffortCfgTableEntry 4 }
apQOSBeIsUseTrafficShaping OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS BestEffort service used Traffic Shaping."
::= { apQOSBestEffortCfgTableEntry 5 }
--*************** apQOSBestEffortCfg ends **********
--*************** apQOSVoiceInfoCfg starts **********
apQOSVoiceInfoCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSVoiceInfoCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap QOS voice service parameter config table."
::={ apQOSVoiceInfoCfgObjects 1 }
apQOSVoiceInfoCfgTableEntry OBJECT-TYPE
SYNTAX ApQOSVoiceInfoCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap QOS voice service parameter config table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSVoiceInfoCfgTable 1 }
ApQOSVoiceInfoCfgTableEntry ::=
SEQUENCE {
apQOSVoiceMaxSvcCnt Integer32,
apQOSVoiceSvcBW Integer32,
apQOSVoiceSvcBWPercent Integer32,
apQOSVoiceIsUseStreamBasedQueue TruthValue,
apQOSVoiceStreamMaxQueueLen Integer32,
apQOSVoiceStreamAvgSpeed Integer32,
apQOSVoiceStreamMaxBurst Integer32,
apQOSVoiceIsUseWREDAlg TruthValue,
apQOSVoiceIsUseTrafficShaping TruthValue
}
apQOSVoiceMaxSvcCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Voice service apposition max count."
::= { apQOSVoiceInfoCfgTableEntry 1 }
apQOSVoiceSvcBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Voice service bandwidth limit."
::= { apQOSVoiceInfoCfgTableEntry 2 }
apQOSVoiceSvcBWPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Voice service bandwidth percent."
::= { apQOSVoiceInfoCfgTableEntry 3 }
apQOSVoiceIsUseStreamBasedQueue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Voice Stream Based Queue enable."
::= { apQOSVoiceInfoCfgTableEntry 4 }
apQOSVoiceStreamMaxQueueLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Voice Stream Max Queue lenth."
::= { apQOSVoiceInfoCfgTableEntry 5 }
apQOSVoiceStreamAvgSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Voice Stream average speed."
::= { apQOSVoiceInfoCfgTableEntry 6 }
apQOSVoiceStreamMaxBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Voice Stream Max Burst speed."
::= { apQOSVoiceInfoCfgTableEntry 7 }
apQOSVoiceIsUseWREDAlg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Voice service used WRED arithmetic."
::= { apQOSVoiceInfoCfgTableEntry 8 }
apQOSVoiceIsUseTrafficShaping OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Voice service used Traffic Shaping."
::= { apQOSVoiceInfoCfgTableEntry 9 }
--*************** apQOSVoiceInfoCfg ends **********
--*************** apQOSVideoInfoCfg starts **********
apQOSVideoInfoCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSVideoInfoCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap QOS Video service parameter config table."
::={ apQOSVideoInfoCfgObjects 1 }
apQOSVideoInfoCfgTableEntry OBJECT-TYPE
SYNTAX ApQOSVideoInfoCfgTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap QOS Video service parameter config table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSVideoInfoCfgTable 1 }
ApQOSVideoInfoCfgTableEntry ::=
SEQUENCE {
apQOSVideoMaxSvcCnt Integer32,
apQOSVideoSvcBW Integer32,
apQOSVideoSvcBWPercent Integer32,
apQOSVideoIsUseStreamBasedQueue TruthValue,
apQOSVideoStreamMaxQueueLen Integer32,
apQOSVideoStreamAvgSpeed Integer32,
apQOSVideoStreamMaxBurst Integer32,
apQOSVideoIsUseWREDAlg TruthValue,
apQOSVideoIsUseTrafficShaping TruthValue
}
apQOSVideoMaxSvcCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Video service apposition max count."
::= { apQOSVideoInfoCfgTableEntry 1 }
apQOSVideoSvcBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Video service bandwidth limit."
::= { apQOSVideoInfoCfgTableEntry 2 }
apQOSVideoSvcBWPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Video service bandwidth percent."
::= { apQOSVideoInfoCfgTableEntry 3 }
apQOSVideoIsUseStreamBasedQueue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Video Stream Based Queue enable."
::= { apQOSVideoInfoCfgTableEntry 4 }
apQOSVideoStreamMaxQueueLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Video Stream Max Queue lenth."
::= { apQOSVideoInfoCfgTableEntry 5 }
apQOSVideoStreamAvgSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Video Stream average speed."
::= { apQOSVideoInfoCfgTableEntry 6 }
apQOSVideoStreamMaxBurst OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Video Stream Max Burst speed."
::= { apQOSVideoInfoCfgTableEntry 7 }
apQOSVideoIsUseWREDAlg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Video service used WRED arithmetic."
::= { apQOSVideoInfoCfgTableEntry 8 }
apQOSVideoIsUseTrafficShaping OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap QOS Video service used Traffic Shaping."
::= { apQOSVideoInfoCfgTableEntry 9 }
--*************** apQOSVideoInfoCfg ends **********
--*************** apQOSWMMConifg starts **********
apQOSWMMConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSWMMConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap QOS Video service parameter config table."
::={ apQOSWMMConfigObjects 1 }
apQOSWMMConfigTableEntry OBJECT-TYPE
SYNTAX ApQOSWMMConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Radio WMM parameter config table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSWMMConfigTable 1 }
ApQOSWMMConfigTableEntry ::=
SEQUENCE {
apQOSMode INTEGER,
apQOSUpdateSeq INTEGER,
apQOSSvpAcIndex INTEGER,
apQOSUapsd INTEGER,
apQOSAcIndx1 INTEGER,
apQOSAcIndx2 INTEGER,
apQOSAcIndx3 INTEGER,
apQOSAcIndx4 INTEGER,
apQOSAifsn1 INTEGER,
apQOSAifsn2 INTEGER,
apQOSAifsn3 INTEGER,
apQOSAifsn4 INTEGER,
apQOSEcwMin1 INTEGER,
apQOSEcwMin2 INTEGER,
apQOSEcwMin3 INTEGER,
apQOSEcwMin4 INTEGER,
apQOSEcwMax1 INTEGER,
apQOSEcwMax2 INTEGER,
apQOSEcwMax3 INTEGER,
apQOSEcwMax4 INTEGER,
apQOSTxopLmt1 INTEGER,
apQOSTxopLmt2 INTEGER,
apQOSTxopLmt3 INTEGER,
apQOSTxopLmt4 INTEGER,
apQOSAcmAndAck1 INTEGER,
apQOSAcmAndAck2 INTEGER,
apQOSAcmAndAck3 INTEGER,
apQOSAcmAndAck4 INTEGER
}
apQOSMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
wmm(1),
dot8011e(2),
wmm80211e(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QOS Mode 0:none 1:wmm 2:80211.e 3:wmm & 80211.e ."
::= { apQOSWMMConfigTableEntry 1 }
apQOSUpdateSeq OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSUpdateSeq."
::= { apQOSWMMConfigTableEntry 2}
apQOSSvpAcIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSSvpAcIndex."
::= { apQOSWMMConfigTableEntry 3}
apQOSUapsd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSUapsd."
::= { apQOSWMMConfigTableEntry 4}
apQOSAcIndx1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAifsn1."
::= {apQOSWMMConfigTableEntry 5}
apQOSAcIndx2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAifsn2."
::= {apQOSWMMConfigTableEntry 6}
apQOSAcIndx3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAifsn3."
::= {apQOSWMMConfigTableEntry 7}
apQOSAcIndx4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAcIndx4."
::= {apQOSWMMConfigTableEntry 8}
apQOSAifsn1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAifsn1."
::= {apQOSWMMConfigTableEntry 9}
apQOSAifsn2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAifsn2."
::= {apQOSWMMConfigTableEntry 10}
apQOSAifsn3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAifsn3."
::= {apQOSWMMConfigTableEntry 11}
apQOSAifsn4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAifsn4."
::= {apQOSWMMConfigTableEntry 12}
apQOSEcwMin1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSEcwMin1."
::= {apQOSWMMConfigTableEntry 13}
apQOSEcwMin2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSEcwMin2."
::= {apQOSWMMConfigTableEntry 14}
apQOSEcwMin3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSEcwMax1."
::= {apQOSWMMConfigTableEntry 15}
apQOSEcwMin4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSEcwMax1."
::= {apQOSWMMConfigTableEntry 16}
apQOSEcwMax1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSEcwMax1."
::= {apQOSWMMConfigTableEntry 17}
apQOSEcwMax2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSEcwMax2."
::= {apQOSWMMConfigTableEntry 18}
apQOSEcwMax3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSEcwMax3."
::= {apQOSWMMConfigTableEntry 19}
apQOSEcwMax4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSEcwMax4."
::= {apQOSWMMConfigTableEntry 20}
apQOSTxopLmt1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSTxopLmt3."
::= {apQOSWMMConfigTableEntry 21}
apQOSTxopLmt2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSTxopLmt3."
::= {apQOSWMMConfigTableEntry 22}
apQOSTxopLmt3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSTxopLmt3."
::= {apQOSWMMConfigTableEntry 23}
apQOSTxopLmt4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSTxopLmt4."
::= {apQOSWMMConfigTableEntry 24}
apQOSAcmAndAck1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAcmAndAck1."
::= { apQOSWMMConfigTableEntry 25}
apQOSAcmAndAck2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAcmAndAck2."
::= { apQOSWMMConfigTableEntry 26}
apQOSAcmAndAck3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAcmAndAck3."
::= { apQOSWMMConfigTableEntry 27}
apQOSAcmAndAck4 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"apQOSAcmAndAck2."
::= { apQOSWMMConfigTableEntry 28}
--*************** apQOSWMMConifg ends **********
--**************************************************
--* apQOSinfoConfig ends *
--**************************************************
--**************************************************
--* apAlarmParamConfig starts *
--**************************************************
--apAlarmParamConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 8 }
--apAlarmParamConfigTable OBJECT-TYPE
-- SYNTAX SEQUENCE OF ApAlarmParamConfigTableEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "ap alarm parameter config table."
-- ::={ apAlarmParamConfigObjects 1 }
--
--apAlarmParamConfigTableEntry OBJECT-TYPE
-- SYNTAX ApAlarmParamConfigTableEntry
-- MAX-ACCESS not-accessible
-- STATUS current
-- DESCRIPTION
-- "ap alarm parameter config table."
-- INDEX { ifIndex }
-- ::= { apAlarmParamConfigTable 1 }
--
--ApAlarmParamConfigTableEntry ::=
-- SEQUENCE {
-- apStaInterfNumThreshhd INTEGER,
-- apAPCoInterfThreshhd INTEGER,
-- apAPNeiborInterfThreshhd INTEGER,
-- apCPUusageThreshhd INTEGER,
-- apMemUsageThreshhd INTEGER
-- }
apAlarmParamConfigEntry OBJECT IDENTIFIER ::= { fsFitApMibModule 8 }
apStaInterfNumThreshhd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"if Sta InterfNum bigger this param,them send trap."
::= { apAlarmParamConfigEntry 1 }
apAPCoInterfThreshhd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap detect CoInterfThreshhderfNum bigger this param,them send trap."
::= { apAlarmParamConfigEntry 2 }
apAPNeiborInterfThreshhd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap detect APNeiborInterf bigger this param,them send trap."
::= { apAlarmParamConfigEntry 3 }
apCPUusageThreshhd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap CPUusage bigger this param,them send trap."
::= { apAlarmParamConfigEntry 4 }
apMemUsageThreshhd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap Memory usage bigger this param,them send trap."
::= { apAlarmParamConfigEntry 5 }
acUserExcepOfflineTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"user exception offline times."
::= { apAlarmParamConfigEntry 6 }
acAuthReqTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"user auth request total times."
::= { apAlarmParamConfigEntry 7 }
acAuthSuccessTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"user auth success times."
::= { apAlarmParamConfigEntry 8 }
acAuthReqFailTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"user auth request fail times."
::= { apAlarmParamConfigEntry 9 }
acDisconnectOnlineUsersCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"user offline times."
::= { apAlarmParamConfigEntry 10 }
acOnlineUserNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"on-line user number."
::= { apAlarmParamConfigEntry 11 }
--**************************************************
--* apAlarmParameterConfig ends *
--**************************************************
--**************************************************
--* apVLANConfig starts *
--**************************************************
apVLANConfigObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 9 }
apVLANConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApVLANConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap vlan config table."
::={ apVLANConfigObjects 1 }
apVLANConfigTableEntry OBJECT-TYPE
SYNTAX ApVLANConfigTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap vlan config table."
INDEX { ifIndex,fsApgWlanId }
::= { apVLANConfigTable 1 }
ApVLANConfigTableEntry ::=
SEQUENCE {
apVLANID INTEGER,
apVlanCfgStatus RowStatus
}
apVLANID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ap Memory usage bigger this param,them send trap."
::= { apVLANConfigTableEntry 1 }
apVlanCfgStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status column used for creating and
deleting instances of the columnar objects in the table."
::= { apVLANConfigTableEntry 2 }
--**************************************************
--* apVLANConfig ends *
--**************************************************
--**************************************************
--* apAccessControl starts *
--**************************************************
apAccessControl OBJECT IDENTIFIER ::= { fsFitApMibModule 12 }
--**************************************************
--* apTerminalPermitTable begins
--**************************************************
apTerminalPermitTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApTerminalPermitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Terminal white list"
::= { apAccessControl 1 }
apTerminalPermitEntry OBJECT-TYPE
SYNTAX ApTerminalPermitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apTerminalPermitTable."
INDEX
{ apWhiteListIndex }
::= { apTerminalPermitTable 1 }
ApTerminalPermitEntry ::=
SEQUENCE {
apWhiteListIndex INTEGER,
apPermitMAC MacAddress,
apWhiteListStatus RowStatus
}
apWhiteListIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table."
::= { apTerminalPermitEntry 1 }
apPermitMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The permited MAC address."
::= { apTerminalPermitEntry 2 }
apWhiteListStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status column used for creating and
deleting instances of the columnar objects in the table."
::= { apTerminalPermitEntry 3 }
--**************************************************
--* apTerminalPermitTable ends
--**************************************************
--**************************************************
--* apTerminalDeniedTable begins
--**************************************************
apTerminalDeniedTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApTerminalDeniedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Terminal black list"
::= { apAccessControl 2 }
apTerminalDeniedEntry OBJECT-TYPE
SYNTAX ApTerminalDeniedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apTerminalDeniedTable."
INDEX
{ apBlackListIndex }
::= { apTerminalDeniedTable 1 }
ApTerminalDeniedEntry ::=
SEQUENCE {
apBlackListIndex INTEGER,
apAttackDeviceMAC MacAddress,
apBlackListStatus RowStatus
}
apBlackListIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table."
::= { apTerminalDeniedEntry 1 }
apAttackDeviceMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Denied MAC address."
::= { apTerminalDeniedEntry 2 }
apBlackListStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status column used for creating and
deleting instances of the columnar objects in the table."
::= { apTerminalDeniedEntry 3 }
--**************************************************
--* apTerminalDeniedTable ends
--**************************************************
--**************************************************
--* apTerminalBlackListTable begins
--**************************************************
apTerminalBlackListTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApTerminalBlackListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Terminal Black List Table"
::= { apAccessControl 3 }
apTerminalBlackListEntry OBJECT-TYPE
SYNTAX ApTerminalBlackListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apTerminalBlackListTable."
INDEX
{ apBlackListDeviceMAC }
::= { apTerminalBlackListTable 1 }
ApTerminalBlackListEntry ::=
SEQUENCE {
apBlackListDeviceMAC MacAddress,
apBlackListAddReason OCTET STRING,
apBlackListDuration TimeTicks
}
apBlackListDeviceMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"the Station Mac Address."
::= { apTerminalBlackListEntry 1 }
apBlackListAddReason OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the reason of adding, included static and dynamic."
::= { apTerminalBlackListEntry 2 }
apBlackListDuration OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"adding type: dynamic, the rest of time the record in list
adding type: static, 0."
::= { apTerminalBlackListEntry 3 }
--**************************************************
--* apTerminalBlackListTable ends
--**************************************************
--**************************************************
--* apAccessControl ends *
--**************************************************
--**************************************************
--* acCapabilityStatistics begins *
--**************************************************
acCapabilityStatistics OBJECT IDENTIFIER ::= { fsFitApMibModule 13 }
acWirelessDownDropFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total downlink droped frames of ac"
::= { acCapabilityStatistics 1 }
acWirelessDownRetryFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total downlink retry frames of ac"
::= { acCapabilityStatistics 2 }
acWirelessDownFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total downlink frames of ac"
::= { acCapabilityStatistics 3 }
acWirelessDownErrorFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total downlink error frames of ac"
::= { acCapabilityStatistics 4 }
acWirelessUpFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total uplink frames of ac"
::= { acCapabilityStatistics 5 }
acWirelessUpDropFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total uplink droped frames of ac"
::= { acCapabilityStatistics 6 }
acWirelessUpRetryFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total uplink retry frames of ac"
::= { acCapabilityStatistics 7 }
acWirelessUpRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total bit uplink rate of ac, unit: kbyte/s."
::= { acCapabilityStatistics 8 }
acWirelessDownRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total bit downlink rate of ac, unit: kbyte/s."
::= { acCapabilityStatistics 9 }
--**************************************************
--* acCapabilityStatistics ends *
--**************************************************
--**************************************************
--* apWidsInfoObjects begins *
--**************************************************
apWidsInfoObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 14 }
--**************************************************
--* apWidsIllegalApTable begins
--**************************************************
apWidsIllegalApTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWidsIllegalApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Illegal ap table"
::= { apWidsInfoObjects 1 }
apWidsIllegalApEntry OBJECT-TYPE
SYNTAX ApWidsIllegalApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apWidsIllegalApTable."
INDEX
{ apIllegalApMac }
::= { apWidsIllegalApTable 1 }
ApWidsIllegalApEntry ::=
SEQUENCE {
apIllegalApMac MacAddress,
apIllegalApChannel INTEGER,
apIllegalApRSSI INTEGER,
apWorkingApMac MacAddress,
apDetectAPBSSID MacAddress,
apIllegalApType INTEGER,
apIllegalApSSID DisplayString
}
apIllegalApMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"illegal ap mac."
::= { apWidsIllegalApEntry 1 }
apIllegalApChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"illegal ap channel."
::= { apWidsIllegalApEntry 2 }
apIllegalApRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"illegal ap RSSI."
::= { apWidsIllegalApEntry 3 }
apWorkingApMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Working ap mac."
::= { apWidsIllegalApEntry 4 }
apDetectAPBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Working ap BSSID."
::= { apWidsIllegalApEntry 5 }
apIllegalApType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"illegal ap type 0:AP 1:adhoc."
::= { apWidsIllegalApEntry 6 }
apIllegalApSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"illegal ap SSID."
::= { apWidsIllegalApEntry 7 }
--**************************************************
--* apWidsIllegalApTable ends
--**************************************************
--**************************************************
--* apWidsApCounterTable begins
--**************************************************
apWidsApCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWidsApCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Illegal ap table"
::= { apWidsInfoObjects 2 }
apWidsApCounterEntry OBJECT-TYPE
SYNTAX ApWidsApCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apWidsApCounterTable."
INDEX
{ apCounterMac }
::= { apWidsApCounterTable 1 }
ApWidsApCounterEntry ::=
SEQUENCE {
apCounterMac MacAddress,
apCounter INTEGER,
apCounterMode INTEGER,
apCounterRssiThreshold INTEGER
}
apCounterMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap mac."
::= { apWidsApCounterEntry 1 }
apCounter OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap counter."
::= { apWidsApCounterEntry 2}
apCounterMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap counter mdoe, supports a variety of combinations, 0x1:config 0x2:rouge 0x4:ssid 0x8:adhoc."
::= { apWidsApCounterEntry 3}
apCounterRssiThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap counter rssi."
::= { apWidsApCounterEntry 4}
--**************************************************
--* apWidsIllegalApCounterTable ends
--**************************************************
apWidsDeviceMode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set device mode for all ap, 0: normal, 1:mornitor, 2: hybrid"
::= { apWidsInfoObjects 3 }
apWidsCounterIllegalAp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set device mode for all ap, 0: not counter, non-zero: counter"
::= { apWidsInfoObjects 4 }
apWidsCounterModeIllegalAp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ap counter mdoe, supports a variety of combinations, 0x1:config 0x2:rouge 0x4:ssid 0x8:adhoc."
::= { apWidsInfoObjects 5 }
apWidsDeviceModeFlag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"device mode flag, 0 for single ap config, 1 for all ap config. "
::= { apWidsInfoObjects 6 }
apWidsCounterIllegalApFlag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"device mode flag, 0 for single ap config, 1 for all ap config."
::= { apWidsInfoObjects 7 }
apWidsCounterModeIllegalApFlag OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"device mode flag, 0 for single ap config, 1 for all ap config."
::= { apWidsInfoObjects 8 }
--**************************************************
--* apWidsPermitMacTable begins
--**************************************************
apWidsPermitMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWidsPermitMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"wids permit mac table"
::= { apWidsInfoObjects 9 }
apWidsPermitMacEntry OBJECT-TYPE
SYNTAX ApWidsPermitMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apWidsPermitMacTable."
INDEX
{ apWidsPermitMac }
::= { apWidsPermitMacTable 1 }
ApWidsPermitMacEntry ::=
SEQUENCE {
apWidsPermitMac MacAddress,
apPermitMacrowstatus RowStatus
}
apWidsPermitMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wids permit mac."
::= { apWidsPermitMacEntry 1 }
apPermitMacrowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"wids permit mac table row status."
::= { apWidsPermitMacEntry 2 }
--**************************************************
--* apWidsPermitMacTable ends
--**************************************************
--**************************************************
--* apWidsPermitSSIDTable begins
--**************************************************
apWidsPermitSSIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWidsPermitSSIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"wids permit ssid table"
::= { apWidsInfoObjects 10 }
apWidsPermitSSIDEntry OBJECT-TYPE
SYNTAX ApWidsPermitSSIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apWidsPermitSSIDTable."
INDEX
{ apCounterSSID }
::= { apWidsPermitSSIDTable 1 }
ApWidsPermitSSIDEntry ::=
SEQUENCE {
apCounterSSID DisplayString,
apPermitSSIDrowstatus RowStatus
}
apCounterSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wids permit ssid."
::= { apWidsPermitSSIDEntry 1 }
apPermitSSIDrowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"wids permit ssid table row status."
::= { apWidsPermitSSIDEntry 2 }
--**************************************************
--* apWidsPermitSSIDTable ends
--**************************************************
--**************************************************
--* apWidsPermitVendorTable begins
--**************************************************
apWidsPermitVendorTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWidsPermitVendorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"wids permit Vendor table"
::= { apWidsInfoObjects 11 }
apWidsPermitVendorEntry OBJECT-TYPE
SYNTAX ApWidsPermitVendorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apWidsPermitVendorTable."
INDEX
{ apCounterVendor }
::= { apWidsPermitVendorTable 1 }
ApWidsPermitVendorEntry ::=
SEQUENCE {
apCounterVendor MacAddress,
apPermitVendorrowstatus RowStatus
}
apCounterVendor OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wids permit Vendor."
::= { apWidsPermitVendorEntry 1 }
apPermitVendorrowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"wids permit vendor table row status."
::= { apWidsPermitVendorEntry 2 }
--**************************************************
--* apWidsPermitVendorTable ends
--**************************************************
--**************************************************
--* apWidsStaticAttackTable begins
--**************************************************
apWidsStaticAttackTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWidsStaticAttackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"wids static attack mac table"
::= { apWidsInfoObjects 12}
apWidsStaticAttackEntry OBJECT-TYPE
SYNTAX ApWidsStaticAttackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apWidsStaticAttackTable."
INDEX
{ apStaticAttackMac }
::= { apWidsStaticAttackTable 1 }
ApWidsStaticAttackEntry ::=
SEQUENCE {
apStaticAttackMac MacAddress,
apStaticAttackrowstatus RowStatus
}
apStaticAttackMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wids static attack mac."
::= { apWidsStaticAttackEntry 1 }
apStaticAttackrowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"wids static attack mac table row status."
::= { apWidsStaticAttackEntry 2 }
--**************************************************
--* apWidsStaticAttackTable ends
--**************************************************
--**************************************************
--* apWidsNeighborApTable begins
--**************************************************
apWidsNeighborApInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWidsNeighborApInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"wids neighbor Aps' Infomation table"
::= { apWidsInfoObjects 13 }
apWidsNeighborApInfoEntry OBJECT-TYPE
SYNTAX ApWidsNeighborApInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apWidsNeighborApInfoTable."
INDEX { neighborApMac }
::= { apWidsNeighborApInfoTable 1 }
ApWidsNeighborApInfoEntry ::=
SEQUENCE {
neighborApMac MacAddress,
neighborApSSID DisplayString,
neighborApRSSI INTEGER,
neighborApChannel INTEGER,
neighborApInControl INTEGER
}
neighborApMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbor Ap Mac Address ."
::= { apWidsNeighborApInfoEntry 1 }
neighborApSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbor Ap Mac SSID ."
::= { apWidsNeighborApInfoEntry 2 }
neighborApRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbor Ap Mac RSSI ."
::= { apWidsNeighborApInfoEntry 3 }
neighborApChannel OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Neighbor Ap Channel ."
::= { apWidsNeighborApInfoEntry 4 }
neighborApInControl OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Is this Neighbor Ap under this Ac's control."
::= { apWidsNeighborApInfoEntry 5 }
apWidsClearIlleglApListFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set 1(TRUE) to clear Wids illagle."
::= { apWidsInfoObjects 14 }
apWidsFloodInterval OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WIDS flood detech Interval."
::= { apWidsInfoObjects 15 }
apWidsBlackListThreshold OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WIDS Black List Threshold."
::= { apWidsInfoObjects 16 }
apWidsBlackListDuration OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WIDS Black List Duration."
::= { apWidsInfoObjects 17 }
apWidsFloodDetectOnOff OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WIDS Flood Detect On or Off
1: on
0: off."
::= { apWidsInfoObjects 18 }
apWidsCounterRssiThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global wids counter rssi."
::= { apWidsInfoObjects 19 }
--**************************************************
--* apWidsBlackSSIDTable begins
--**************************************************
apWidsBlackSSIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWidsBlackSSIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"wids black ssid table"
::= { apWidsInfoObjects 20 }
apWidsBlackSSIDEntry OBJECT-TYPE
SYNTAX ApWidsBlackSSIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apWidsBlackSSIDTable."
INDEX
{ apBlackSSID }
::= { apWidsBlackSSIDTable 1 }
ApWidsBlackSSIDEntry ::=
SEQUENCE {
apBlackSSID DisplayString,
apBlackSSIDrowstatus RowStatus
}
apBlackSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wids black ssid."
::= { apWidsBlackSSIDEntry 1 }
apBlackSSIDrowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"wids black ssid table row status."
::= { apWidsBlackSSIDEntry 2 }
--**************************************************
--* apWidsBlackSSIDTable ends
--**************************************************
--**************************************************
--* apWidsInfoObjects ends *
--**************************************************
--**************************************************
--* apConfigInfoObjects begins *
--**************************************************
apConfigInfoObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 15 }
--**************************************************
--* apConfigInfoTable begins
--**************************************************
apConfigInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApConfigInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ap config table"
::= { apConfigInfoObjects 1 }
apConfigInfoEntry OBJECT-TYPE
SYNTAX ApConfigInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apConfigInfoTable."
INDEX
{ apConfigInfoMac }
::= { apConfigInfoTable 1 }
ApConfigInfoEntry ::=
SEQUENCE {
apConfigInfoMac MacAddress,
apSpectralSwitch INTEGER,
apSpectralSupport INTEGER,
apSmartAntSupport INTEGER,
apSmartDisSupport INTEGER,
apAntdetectSupport INTEGER,
apAntdetectEnable INTEGER,
apAntdetectInterval INTEGER,
apAntdetectState INTEGER
}
apConfigInfoMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ap mac."
::= { apConfigInfoEntry 1 }
apSpectralSwitch OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"spectral switch, 0:closed 1:open."
::= { apConfigInfoEntry 2 }
apSpectralSupport OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"spectral support 0:not support 1:only support 2.4G 2:only support 5G 3:both support 2.4G/5G."
::= { apConfigInfoEntry 3 }
apSmartAntSupport OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"smartant support 0:not support 1:support."
::= { apConfigInfoEntry 4 }
apSmartDisSupport OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"smartdis support 0:not support 1:support."
::= { apConfigInfoEntry 5 }
apAntdetectSupport OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Antenna detect support 0:not support 1:support."
::= { apConfigInfoEntry 6 }
apAntdetectEnable OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"antenna detect switch, 0:closed 1:open."
::= { apConfigInfoEntry 7 }
apAntdetectInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"antenna detect interval, (1 - 10000) minutes "
::= { apConfigInfoEntry 8 }
apAntdetectState OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"antenna state, result of antenna detect, bitmask, 0:ok, 1:not"
::= { apConfigInfoEntry 9 }
--**************************************************
--* apConfigInfoTable ends
--**************************************************
--**************************************************
--* apConfigInfoObjects ends *
--**************************************************
--**************************************************
--* apAntDetectObjects begins *
--**************************************************
apAntDetectObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 16 }
--**************************************************
--* apAntDetectTable begins
--**************************************************
apAntDetectTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApAntDetectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ap ant detect table"
::= { apAntDetectObjects 1 }
apAntDetectEntry OBJECT-TYPE
SYNTAX ApAntDetectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apAntDetectTable."
INDEX
{ apAntDetectAPMac, apAntDetectAntIndex }
::= { apAntDetectTable 1 }
ApAntDetectEntry ::=
SEQUENCE {
apAntDetectAPMac MacAddress,
apAntDetectAntIndex INTEGER,
apAntDetectDesc DisplayString,
apAntDetectRadioId DisplayString,
apAntDetectStatus INTEGER
}
apAntDetectAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ap mac."
::= { apAntDetectEntry 1 }
apAntDetectAntIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ant index."
::= { apAntDetectEntry 2 }
apAntDetectDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ant description."
::= { apAntDetectEntry 3 }
apAntDetectRadioId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ant radioid."
::= { apAntDetectEntry 4 }
apAntDetectStatus OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ant status."
::= { apAntDetectEntry 5 }
--**************************************************
--* apAntDetectTable ends
--**************************************************
--**************************************************
--* apAntDetectCfgTable begins
--**************************************************
apAntDetectCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApAntDetectCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ap ant detect cfg table"
::= { apAntDetectObjects 2 }
apAntDetectCfgEntry OBJECT-TYPE
SYNTAX ApAntDetectCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of apAntDetectCfgTable."
INDEX
{ apAntDetectCfgAPMac }
::= { apAntDetectCfgTable 1 }
ApAntDetectCfgEntry ::=
SEQUENCE {
apAntDetectCfgAPMac MacAddress,
apAntDetectCfgSupport INTEGER,
apAntDetectCfgSwitch INTEGER
}
apAntDetectCfgAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ap mac."
::= { apAntDetectCfgEntry 1 }
apAntDetectCfgSupport OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ant detect support."
::= { apAntDetectCfgEntry 2 }
apAntDetectCfgSwitch OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ant detect switch."
::= { apAntDetectCfgEntry 3 }
--**************************************************
--* apAntDetectCfgTable ends
--**************************************************
--**************************************************
--* apAntDetectObjects ends *
--**************************************************
--**************************************************
--* apStatisticsInfoRead starts *
--**************************************************
apStatisticsInfoReadObjects OBJECT IDENTIFIER ::= { fsFitApMibModule 10 }
apSysCapabilityStatisticsObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 1 }
apLinkStatisticsObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 2 }
apInterfaceRGMIIStatisticsObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 3 }
apInterfaceWireStatisticsObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 4 }
apSSIDStatisticsObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 5 }
apWAPIStatisticsObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 6 }
apStationStatisticsObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 7 }
apQOSStatisticsObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 8 }
apQOSBaseStatisticsObjects OBJECT IDENTIFIER ::= { apQOSStatisticsObjects 1 }
apQOSBackgroundStatisticsObjects OBJECT IDENTIFIER ::= { apQOSStatisticsObjects 2 }
apQOSBestEffortStatisticsObjects OBJECT IDENTIFIER ::= { apQOSStatisticsObjects 3 }
apQOSVoiceStatisticsObjects OBJECT IDENTIFIER ::= { apQOSStatisticsObjects 4 }
apQOSVideoStatisticsObjects OBJECT IDENTIFIER ::= { apQOSStatisticsObjects 5 }
apWIDSRogueApInfoObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 9 }
apStaTransSpeedObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 10 }
apStationAssoRssiObjects OBJECT IDENTIFIER ::= { apStatisticsInfoReadObjects 11}
apSysCapabilityStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApSysCapabilityStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap system Capability Statistics info table."
::={ apSysCapabilityStatisticsObjects 1 }
apSysCapabilityStatisticsTableEntry OBJECT-TYPE
SYNTAX ApSysCapabilityStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap system Capability Statistics info table."
INDEX { fsApMacAddr }
::= { apSysCapabilityStatisticsTable 1 }
ApSysCapabilityStatisticsTableEntry ::=
SEQUENCE {
apCPURTUsage INTEGER,
apCPUAvgUsage INTEGER,
apMemRTUsage INTEGER,
apMemAvgUsage INTEGER
}
apCPURTUsage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap CPU real time usage ."
::= { apSysCapabilityStatisticsTableEntry 1 }
apCPUAvgUsage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap CPU average usage ."
::= { apSysCapabilityStatisticsTableEntry 2 }
apMemRTUsage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Memory real time usage ."
::= { apSysCapabilityStatisticsTableEntry 3 }
apMemAvgUsage OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Memory average usage ."
::= { apSysCapabilityStatisticsTableEntry 4 }
--**************************************************
apLinkStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApLinkStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Links Statistics info table."
::={ apLinkStatisticsObjects 1 }
apLinkStatisticsTableEntry OBJECT-TYPE
SYNTAX ApLinkStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Links Statistics info table."
INDEX { fsApMacAddr }
::= { apLinkStatisticsTable 1 }
ApLinkStatisticsTableEntry ::=
SEQUENCE {
apStationAssocSum INTEGER,
apStationOnlineSum INTEGER,
apAssocTimes Counter32,
apAssocFailTimes Counter32,
apReassocTimes Counter32,
apPreAssCannotShiftDeassocFailSum Counter32,
apApStatsDisassociated Counter32,
apAssocRejectSum Counter32,
apBSSNotSupportAssocFailSum Counter32,
apApAuthReqTimes Counter32,
apApAuthSuccessTimes Counter32,
acApAuthReqFailTimes Counter32,
apReassocFailTimes Counter32,
apRSSILowAssocFailSum Counter32,
apUnknowReasonAssoFailSum Counter32,
apOut80211StandardAssocFailSum Counter32,
apAllStationsTotalUpTime INTEGER,
apAssocRespTimes Counter32,
apAssocSuccTimes Counter32,
apUserRadiusOnlineSum INTEGER,
apAllUserOnlineTime TimeTicks,
apRadiusAuthTimes Counter32,
apRadiusAuthSuccTimes Counter32,
apRadiusAuthFailTimes Counter32,
apAssocSuccessTimes Counter32
}
apStationAssocSum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Station Assocate Sum."
::= { apLinkStatisticsTableEntry 1 }
apStationOnlineSum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Station Online Sum."
::= { apLinkStatisticsTableEntry 2 }
apAssocTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Station Assocate times."
::= { apLinkStatisticsTableEntry 3 }
apAssocFailTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Station Assocate fail times."
::= { apLinkStatisticsTableEntry 4 }
apReassocTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Station reAssocate times."
::= { apLinkStatisticsTableEntry 5 }
apPreAssCannotShiftDeassocFailSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"."
::= { apLinkStatisticsTableEntry 6 }
apApStatsDisassociated OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STA deassociation times"
::= { apLinkStatisticsTableEntry 7 }
apAssocRejectSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total association reject times."
::= { apLinkStatisticsTableEntry 8 }
apBSSNotSupportAssocFailSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total association fail times due to sta not support."
::= { apLinkStatisticsTableEntry 9 }
apApAuthReqTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apLinkStatisticsTableEntry 10 }
apApAuthSuccessTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apLinkStatisticsTableEntry 11 }
acApAuthReqFailTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"user auth request fail times."
::= { apLinkStatisticsTableEntry 12 }
apReassocFailTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"user reassociation fail times."
::= { apLinkStatisticsTableEntry 13 }
apRSSILowAssocFailSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"association fail times due to low rssi."
::= { apLinkStatisticsTableEntry 14 }
apUnknowReasonAssoFailSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"association fail times unkonw reason."
::= { apLinkStatisticsTableEntry 15 }
apOut80211StandardAssocFailSum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"association fail times reason out of the 80211 standard defined."
::= { apLinkStatisticsTableEntry 16 }
apAllStationsTotalUpTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"all stations in ap total up time."
::= { apLinkStatisticsTableEntry 17 }
apAssocRespTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"association response times."
::= { apLinkStatisticsTableEntry 18 }
apAssocSuccTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"association success times."
::= { apLinkStatisticsTableEntry 19 }
apUserRadiusOnlineSum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radius User Online Sum."
::= { apLinkStatisticsTableEntry 20 }
apAllUserOnlineTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radius User Total Up Times."
::= { apLinkStatisticsTableEntry 21 }
apRadiusAuthTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radius Auth Times."
::= { apLinkStatisticsTableEntry 22 }
apRadiusAuthSuccTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radius Auth Success Times."
::= { apLinkStatisticsTableEntry 23 }
apRadiusAuthFailTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Radius Auth Fail Times."
::= { apLinkStatisticsTableEntry 24 }
apAssocSuccessTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Station Assocate Success times."
::= { apLinkStatisticsTableEntry 25 }
--****************************************
apInterfaceRGMIIStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApInterfaceRGMIIStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap RGMII interface Statistics info table."
::={ apInterfaceRGMIIStatisticsObjects 1 }
apInterfaceRGMIIStatisticsTableEntry OBJECT-TYPE
SYNTAX ApInterfaceRGMIIStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap RGMII interface Statistics info table."
INDEX { fsApMacAddr ,apRGMIIIndex}
::= { apInterfaceRGMIIStatisticsTable 1 }
ApInterfaceRGMIIStatisticsTableEntry ::=
SEQUENCE {
apRGMIIIndex INTEGER,
apifInUcastPkts Counter32,
apifInNUcastPkts Counter32,
apifInOctets Counter32,
apifInDiscardPkts Counter32,
apifInErrors Counter32,
apifOutUcastPkts Counter32,
apifOutNUcastPkts Counter32,
apifOutOctets Counter32,
apifOutDiscardPkts Counter32,
apifOutErrors Counter32,
apifUpDwnTimes Counter32
}
apRGMIIIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"local RGMII index ."
::= { apInterfaceRGMIIStatisticsTableEntry 1 }
apifInUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII Receive Ucast packets ."
::= { apInterfaceRGMIIStatisticsTableEntry 2 }
apifInNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII Receive broadcast packets ."
::= { apInterfaceRGMIIStatisticsTableEntry 3 }
apifInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII Receive bytes ."
::= { apInterfaceRGMIIStatisticsTableEntry 4 }
apifInDiscardPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII drop Receive packets ."
::= { apInterfaceRGMIIStatisticsTableEntry 5 }
apifInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII error Receive packets ."
::= { apInterfaceRGMIIStatisticsTableEntry 6 }
apifOutUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII Send Ucast packets ."
::= { apInterfaceRGMIIStatisticsTableEntry 7 }
apifOutNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII Send broadcast packets ."
::= { apInterfaceRGMIIStatisticsTableEntry 8 }
apifOutOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII Send bytes ."
::= { apInterfaceRGMIIStatisticsTableEntry 9 }
apifOutDiscardPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII drop Send packets ."
::= { apInterfaceRGMIIStatisticsTableEntry 10 }
apifOutErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII error Send packets ."
::= { apInterfaceRGMIIStatisticsTableEntry 11 }
apifUpDwnTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RGMII upDown Times ."
::= { apInterfaceRGMIIStatisticsTableEntry 12 }
--*************************************************
apInterfaceWireStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApInterfaceWireStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap wireless interface Statistics info table."
::={ apInterfaceWireStatisticsObjects 1 }
apInterfaceWireStatisticsTableEntry OBJECT-TYPE
SYNTAX ApInterfaceWireStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap wireless interface Statistics info table."
INDEX { fsApMacAddr ,fsApCfgRadioId}
::= { apInterfaceWireStatisticsTable 1 }
ApInterfaceWireStatisticsTableEntry ::=
SEQUENCE {
apAvgRxSignalStrength DisplayString,
apHighestRxSignalStrength DisplayString,
apLowestRxSignalStrength DisplayString,
apWirelessUpdownTimes Counter32,
apChStatsNumStations Counter32,
apTxDataPkts Counter32,
apRxDataPkts Counter32,
apUplinkDataOctets Counter64,
apDwlinkDataOctets Counter64,
apChStatsDwlinkTotRetryPkts Counter32,
apChStatsPhyErrPkts Counter32,
apChStatsMacFcsErrPkts Counter32,
apChStatsMacMicErrPkts Counter32,
apChStatsMacDecryptErrPkts Counter32,
apChStatsTotalErrPkts Counter32,
apRxMgmtFrameCnt Counter32,
apRxCtrlFrameCnt Counter32,
apRxDataFrameCnt Counter32,
apTxMgmtFrameCnt Counter32,
apTxCtrlFrameCnt Counter32,
apTxDataFrameCnt Counter32,
apChStatsFrameErrorCnt Counter32,
apRetryCnt Counter32,
apCurTxPwr Integer32,
apAPNeighborSSIDList DisplayString,
apChDownUnicastFrame Counter32,
apChDownNonUnicastFrame Counter32,
apChTxThroughput Counter32,
apChRxThroughput Counter32,
apChTxDropPkts Counter32,
apChRxDropPkts Counter32,
apChTxErrorPkts Counter32,
apChRxErrorPkts Counter32,
apRxBytes Counter32,
apRxPkts Counter32,
apTxBytes Counter32,
apTxPkts Counter32,
apDownNonUnicastPkts Counter32,
apDownUnicastPkts Counter32,
apUpNonUnicastPkts Counter32,
apUpUnicastPkts Counter32,
apAssoFailUnknowReason Counter32,
apAssoFailOutofDot11 Counter32,
apAssoTotalTime Counter32,
apAuthReqFailTimes Counter32,
apAuthReqTimes Counter32,
apAuthSuccessTimes Counter32,
apReAssoFailTimes Counter32,
apMacTxCorrectFrameCnt Counter32,
apMacRxCorrectFrameCnt Counter32,
apPktErrRate INTEGER,
apTotalRxBytes Counter64,
apTotalTxBytes Counter64,
apTxErrorPkts Counter32,
apTxDropPkts Counter32,
apIfRadiusOnlineUserNum Counter32
}
apAvgRxSignalStrength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"average Rx Signal Strength."
::= { apInterfaceWireStatisticsTableEntry 1 }
apHighestRxSignalStrength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Highest Rx Signal Strength ."
::= { apInterfaceWireStatisticsTableEntry 2 }
apLowestRxSignalStrength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Lowest Rx Signal Strength ."
::= { apInterfaceWireStatisticsTableEntry 3 }
apWirelessUpdownTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wireless Updown Times ."
::= { apInterfaceWireStatisticsTableEntry 4 }
apChStatsNumStations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the number of statons used this channel."
::= { apInterfaceWireStatisticsTableEntry 5 }
apTxDataPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap send Data Packets ."
::= { apInterfaceWireStatisticsTableEntry 6 }
apRxDataPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Receive Data Packets ."
::= { apInterfaceWireStatisticsTableEntry 7 }
apUplinkDataOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Receive Data Bytes ."
::= { apInterfaceWireStatisticsTableEntry 8 }
apDwlinkDataOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Send Data Bytes ."
::= { apInterfaceWireStatisticsTableEntry 9 }
apChStatsDwlinkTotRetryPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Send retry packets."
::= { apInterfaceWireStatisticsTableEntry 10 }
apChStatsPhyErrPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Receive phy error packets."
::= { apInterfaceWireStatisticsTableEntry 11 }
apChStatsMacFcsErrPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Receive MCS FCS error packets."
::= { apInterfaceWireStatisticsTableEntry 12 }
apChStatsMacMicErrPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Receive MCS MIC error packets."
::= { apInterfaceWireStatisticsTableEntry 13 }
apChStatsMacDecryptErrPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Receive MCS Decrypt error packets."
::= { apInterfaceWireStatisticsTableEntry 14 }
apChStatsTotalErrPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap channel Receive all errort packets."
::= { apInterfaceWireStatisticsTableEntry 15 }
apRxMgmtFrameCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RX management frames."
::= { apInterfaceWireStatisticsTableEntry 16 }
apRxCtrlFrameCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RX control frames."
::= { apInterfaceWireStatisticsTableEntry 17 }
apRxDataFrameCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RX data frames."
::= { apInterfaceWireStatisticsTableEntry 18 }
apTxMgmtFrameCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TX management frames."
::= { apInterfaceWireStatisticsTableEntry 19 }
apTxCtrlFrameCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TX control frames."
::= { apInterfaceWireStatisticsTableEntry 20 }
apTxDataFrameCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of TX data frames."
::= { apInterfaceWireStatisticsTableEntry 21 }
apChStatsFrameErrorCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"error frames."
::= { apInterfaceWireStatisticsTableEntry 22 }
apRetryCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"retry count."
::= { apInterfaceWireStatisticsTableEntry 23 }
apCurTxPwr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX power of AP."
::= { apInterfaceWireStatisticsTableEntry 24 }
apAPNeighborSSIDList OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID list around AP."
::= { apInterfaceWireStatisticsTableEntry 25 }
apChDownUnicastFrame OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"down link uincast frame."
::= { apInterfaceWireStatisticsTableEntry 26 }
apChDownNonUnicastFrame OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"down link non-uincast frame."
::= { apInterfaceWireStatisticsTableEntry 27 }
apChTxThroughput OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"transmit throughput."
::= { apInterfaceWireStatisticsTableEntry 28 }
apChRxThroughput OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive throughput."
::= { apInterfaceWireStatisticsTableEntry 29 }
apChTxDropPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"transmit drop packages."
::= { apInterfaceWireStatisticsTableEntry 30 }
apChRxDropPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive drop packages."
::= { apInterfaceWireStatisticsTableEntry 31 }
apChTxErrorPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"transmit error packages."
::= { apInterfaceWireStatisticsTableEntry 32 }
apChRxErrorPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 33 }
apRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 34 }
apRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 35 }
apTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 36 }
apTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 37 }
apDownNonUnicastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 38 }
apDownUnicastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 39 }
apUpNonUnicastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 40 }
apUpUnicastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 41 }
apAssoFailUnknowReason OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 42 }
apAssoFailOutofDot11 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 43 }
apAssoTotalTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 44 }
apAuthReqFailTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 45 }
apAuthReqTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 46 }
apAuthSuccessTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 47 }
apReAssoFailTimes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"receive error packages."
::= { apInterfaceWireStatisticsTableEntry 48 }
apMacTxCorrectFrameCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Send Correct Frame Count ."
::= { apInterfaceWireStatisticsTableEntry 49 }
apMacRxCorrectFrameCnt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Receive Correct Frame Count ."
::= { apInterfaceWireStatisticsTableEntry 50 }
apPktErrRate OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Pkt err rate = pkt error rate."
::= { apInterfaceWireStatisticsTableEntry 51 }
apTotalRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap rx bytes count64."
::= { apInterfaceWireStatisticsTableEntry 52 }
apTotalTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap tx bytes count64."
::= { apInterfaceWireStatisticsTableEntry 53 }
apTxErrorPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX error packet for ap radio."
::= { apInterfaceWireStatisticsTableEntry 54 }
apTxDropPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TX drop packet for ap radio."
::= { apInterfaceWireStatisticsTableEntry 55 }
apIfRadiusOnlineUserNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap Interface Radius Online User Number."
::= { apInterfaceWireStatisticsTableEntry 56 }
--*************************************************
apSSIDStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApSSIDStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap SSID Statistics info table."
::={ apSSIDStatisticsObjects 1 }
apSSIDStatisticsTableEntry OBJECT-TYPE
SYNTAX ApSSIDStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap SSID Statistics info table."
INDEX { apSSIDStatisticsAPMac, apSSIDStatisticsRadioId, apSSIDStatisticsWlanId }
::= { apSSIDStatisticsTable 1 }
ApSSIDStatisticsTableEntry ::=
SEQUENCE {
apSSIDStatisticsAPMac MacAddress,
apSSIDStatisticsRadioId INTEGER,
apSSIDStatisticsWlanId INTEGER,
apSSIDTxDataPkts Counter32,
apSSIDRxDataPkts Counter32,
apSSIDUplinkDataOctets Counter64,
apSSIDDwlinkDataOctets Counter64,
apSSIDChStatsDwlinkTotRetryPkts Counter32,
apSSIDApChStatsNumStations Integer32,
apApChStatsOnlineSum INTEGER,
apSSIDStatisticsName DisplayString,
apSSIDMacTxPkts Counter32,
apSSIDMacRxPkts Counter32
}
apSSIDStatisticsAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap mac."
::= { apSSIDStatisticsTableEntry 1 }
apSSIDStatisticsRadioId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"radio id ."
::= { apSSIDStatisticsTableEntry 2 }
apSSIDStatisticsWlanId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wlan id ."
::= { apSSIDStatisticsTableEntry 3 }
apSSIDTxDataPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap ssid Tx Data packets."
::= { apSSIDStatisticsTableEntry 4 }
apSSIDRxDataPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap ssid Rx Data packets."
::= { apSSIDStatisticsTableEntry 5 }
apSSIDUplinkDataOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap ssid Rx Link Data Bytes."
::= { apSSIDStatisticsTableEntry 6 }
apSSIDDwlinkDataOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap ssid Tx Link Data Bytes."
::= { apSSIDStatisticsTableEntry 7 }
apSSIDChStatsDwlinkTotRetryPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap downLink retry packets."
::= { apSSIDStatisticsTableEntry 8 }
apSSIDApChStatsNumStations OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"stations number current connet to this ssid ."
::= { apSSIDStatisticsTableEntry 9 }
apApChStatsOnlineSum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"stations number on line ."
::= { apSSIDStatisticsTableEntry 10 }
apSSIDStatisticsName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID name ."
::= { apSSIDStatisticsTableEntry 11 }
apSSIDMacTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ssid mac transmit correct packet counte."
::= { apSSIDStatisticsTableEntry 12 }
apSSIDMacRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ssid mac receive correct packets counte."
::= { apSSIDStatisticsTableEntry 13 }
--**************************************************
--*************************************************
apSSIDStatisticsNewTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApSSIDStatisticsNewTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap SSID Statistics info table."
::={ apSSIDStatisticsObjects 2 }
apSSIDStatisticsNewTableEntry OBJECT-TYPE
SYNTAX ApSSIDStatisticsNewTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap SSID Statistics info table."
INDEX { apSSIDStatisticsNewAPMac, apSSIDStatisticsNewRadioId, apSSIDStatisticsNewSSID }
::= { apSSIDStatisticsNewTable 1 }
ApSSIDStatisticsNewTableEntry ::=
SEQUENCE {
apSSIDStatisticsNewAPMac MacAddress,
apSSIDStatisticsNewRadioId INTEGER,
apSSIDStatisticsNewSSID DisplayString,
apSSIDNewTxDataPkts Counter32,
apSSIDNewRxDataPkts Counter32,
apSSIDNewUplinkDataOctets Counter64,
apSSIDNewDwlinkDataOctets Counter64,
apSSIDNewChStatsDwlinkTotRetryPkts Counter32,
apSSIDNewApChStatsNumStations Integer32,
apApNewChStatsOnlineSum INTEGER,
apSSIDNewMacTxPkts Counter32,
apSSIDNewMacRxPkts Counter32
}
apSSIDStatisticsNewAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap mac."
::= { apSSIDStatisticsNewTableEntry 1 }
apSSIDStatisticsNewRadioId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"radio id ."
::= { apSSIDStatisticsNewTableEntry 2 }
apSSIDStatisticsNewSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wlan id ."
::= { apSSIDStatisticsNewTableEntry 3 }
apSSIDNewTxDataPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap ssid Tx Data packets."
::= { apSSIDStatisticsNewTableEntry 4 }
apSSIDNewRxDataPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap ssid Rx Data packets."
::= { apSSIDStatisticsNewTableEntry 5 }
apSSIDNewUplinkDataOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap ssid Rx Link Data Bytes."
::= { apSSIDStatisticsNewTableEntry 6 }
apSSIDNewDwlinkDataOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap ssid Tx Link Data Bytes."
::= { apSSIDStatisticsNewTableEntry 7 }
apSSIDNewChStatsDwlinkTotRetryPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap downLink retry packets."
::= { apSSIDStatisticsNewTableEntry 8 }
apSSIDNewApChStatsNumStations OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"stations number current connet to this ssid ."
::= { apSSIDStatisticsNewTableEntry 9 }
apApNewChStatsOnlineSum OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"stations number on line ."
::= { apSSIDStatisticsNewTableEntry 10 }
apSSIDNewMacTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ssid mac transmit correct packet counte."
::= { apSSIDStatisticsNewTableEntry 11 }
apSSIDNewMacRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ssid mac receive correct packets counte."
::= { apSSIDStatisticsNewTableEntry 12 }
--*************************************************
apSSIDStatisticsOptimizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApSSIDStatisticsOptimizationTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap SSID Statistics info table."
::={ apSSIDStatisticsObjects 3 }
apSSIDStatisticsOptimizationTableEntry OBJECT-TYPE
SYNTAX ApSSIDStatisticsOptimizationTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap SSID Statistics info table."
INDEX { apSSIDStatisticsOptimizationAPMac, apSSIDStatisticsOptimizationRadioId, apSSIDStatisticsOptimizationSSID }
::= { apSSIDStatisticsOptimizationTable 1 }
ApSSIDStatisticsOptimizationTableEntry ::=
SEQUENCE {
apSSIDStatisticsOptimizationAPMac MacAddress,
apSSIDStatisticsOptimizationRadioId INTEGER,
apSSIDStatisticsOptimizationSSID DisplayString,
apSSIDStatisticsOptimizationinfo OCTET STRING
}
apSSIDStatisticsOptimizationAPMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap mac."
::= { apSSIDStatisticsOptimizationTableEntry 1 }
apSSIDStatisticsOptimizationRadioId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"radio id ."
::= { apSSIDStatisticsOptimizationTableEntry 2 }
apSSIDStatisticsOptimizationSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wlan ssid."
::= { apSSIDStatisticsOptimizationTableEntry 3 }
apSSIDStatisticsOptimizationinfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..1023))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap ssid info with json format."
::= { apSSIDStatisticsOptimizationTableEntry 4 }
--**************************************************
apStationStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApStationStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Stations Statistics info table."
::={ apStationStatisticsObjects 1 }
apStationStatisticsTableEntry OBJECT-TYPE
SYNTAX ApStationStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Stations Statistics info table."
INDEX { fsStaMacAddr }
::= { apStationStatisticsTable 1 }
ApStationStatisticsTableEntry ::=
SEQUENCE {
apStaAddress MacAddress,
apStaUpTime TimeTicks,
apReceivedStaSignalStrength DisplayString,
apAPReceiveStaSNR DisplayString,
apStaTxPkts Counter32,
apStaTxBytes Counter64,
apStaRxPkts Counter32,
apStaRxBytes Counter64,
apWAPISTAAddress MacAddress,
apWAPIVersion Integer32,
apStaLinkSpeed Integer32,
apStaUpRate Integer32,
apStaDownRate Integer32,
apStaTxThroughput Counter32,
apStaRxThroughput Counter32,
apStaRxRetryBytes Counter64
}
apStaAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station Mac addr."
::= { apStationStatisticsTableEntry 1 }
apStaUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station connect to AP seconds."
::= { apStationStatisticsTableEntry 2 }
apReceivedStaSignalStrength OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station current single strength."
::= { apStationStatisticsTableEntry 3 }
apAPReceiveStaSNR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR"
::= { apStationStatisticsTableEntry 4 }
apStaTxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station Tx Packets."
::= { apStationStatisticsTableEntry 5 }
apStaTxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station Tx Bytess."
::= { apStationStatisticsTableEntry 6 }
apStaRxPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station Rx Packets."
::= { apStationStatisticsTableEntry 7 }
apStaRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station Rx Bytess."
::= { apStationStatisticsTableEntry 8 }
apWAPISTAAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wapi station mac address."
::= { apStationStatisticsTableEntry 9 }
apWAPIVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wapi version."
::= { apStationStatisticsTableEntry 10 }
apStaLinkSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STA link speed."
::= { apStationStatisticsTableEntry 11 }
apStaUpRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STA uplink rate."
::= { apStationStatisticsTableEntry 12 }
apStaDownRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STA downlink rate."
::= { apStationStatisticsTableEntry 13 }
apStaTxThroughput OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station transmit throughput during associated time."
::= { apStationStatisticsTableEntry 14 }
apStaRxThroughput OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station receive throughput during associated time."
::= { apStationStatisticsTableEntry 15 }
apStaRxRetryBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station Rx retry Bytes."
::= { apStationStatisticsTableEntry 16 }
--**************************************************
apWAPIStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWAPIStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Stations Statistics info table."
::={ apWAPIStatisticsObjects 1 }
apWAPIStatisticsTableEntry OBJECT-TYPE
SYNTAX ApWAPIStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Stations Statistics info table."
INDEX { fsApgWlanId }
::= { apWAPIStatisticsTable 1 }
ApWAPIStatisticsTableEntry ::=
SEQUENCE {
apWAPIControlledPortStatus TruthValue,
apWAPISelectedUnicastCipher OCTET STRING,
apWPIReplayCounters Counter32,
apWPIDecryptableErrors Counter32,
apWPIMICErrors Counter32,
apWAISignatureErrors Counter32,
apWAIHMACErrors Counter32,
apWAIAuthResultFailures Counter32,
apWAIDiscardCounters Counter32,
apWAITimeoutCounters Counter32,
apWAIFormatErrors Counter32,
apWAICertificateHandshakeFailures Counter32,
apWAIUnicastHandshakeFailures Counter32,
apWAIMulticastHandshakeFailures Counter32
}
apWAPIControlledPortStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wapi Controlled Port Status."
::= { apWAPIStatisticsTableEntry 1 }
apWAPISelectedUnicastCipher OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wapi Selected Unicast Cipher."
::= { apWAPIStatisticsTableEntry 2 }
apWPIReplayCounters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wapi Replay drop MPDU packets."
::= { apWAPIStatisticsTableEntry 3 }
apWPIDecryptableErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wapi Decryptable Errors drop MPDU packets."
::= { apWAPIStatisticsTableEntry 4 }
apWPIMICErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wapi MIC Check Errors drop MPDU packets."
::= { apWAPIStatisticsTableEntry 5 }
apWAISignatureErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"wai Signature errors packets."
::= { apWAPIStatisticsTableEntry 6 }
apWAIHMACErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAIHMAC errors packets."
::= { apWAPIStatisticsTableEntry 7 }
apWAIAuthResultFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAPI AuthResultFailures packets."
::= { apWAPIStatisticsTableEntry 8 }
apWAIDiscardCounters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAPI Discard packets."
::= { apWAPIStatisticsTableEntry 9 }
apWAITimeoutCounters OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAPI Timeout drop packets."
::= { apWAPIStatisticsTableEntry 10 }
apWAIFormatErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAPI Format Errors drop packets."
::= { apWAPIStatisticsTableEntry 11 }
apWAICertificateHandshakeFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAPI Certificate Handshake Failures counts."
::= { apWAPIStatisticsTableEntry 12 }
apWAIUnicastHandshakeFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAPI Unicast Handshake Failures counts."
::= { apWAPIStatisticsTableEntry 13 }
apWAIMulticastHandshakeFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAPI Multicast Handshake Failures counts."
::= { apWAPIStatisticsTableEntry 14 }
--**************************************************
--* ap QOS Statistics Info get Starts *
--**************************************************
apQOSBaseStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSBaseStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Base QOS Statistics info table."
::={ apQOSBaseStatisticsObjects 1 }
apQOSBaseStatisticsTableEntry OBJECT-TYPE
SYNTAX ApQOSBaseStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Base QOS Statistics info table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSBaseStatisticsTable 1 }
ApQOSBaseStatisticsTableEntry ::=
SEQUENCE {
apBaseQoSSvcQueAvgLen INTEGER,
apBaseQoSSvcPktLossRatio INTEGER,
apBaseAvgTransSpeed INTEGER
}
apBaseQoSSvcQueAvgLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Queue average len."
::= { apQOSBaseStatisticsTableEntry 1 }
apBaseQoSSvcPktLossRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS packets loss Ratio."
::= { apQOSBaseStatisticsTableEntry 2 }
apBaseAvgTransSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS average TX speed."
::= { apQOSBaseStatisticsTableEntry 3 }
---------------------------------------------------
---------------------------------------------------
apQOSBackgroundStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSBackgroundStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Background QOS Statistics info table."
::={ apQOSBackgroundStatisticsObjects 1 }
apQOSBackgroundStatisticsTableEntry OBJECT-TYPE
SYNTAX ApQOSBackgroundStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Background QOS Statistics info table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSBackgroundStatisticsTable 1 }
ApQOSBackgroundStatisticsTableEntry ::=
SEQUENCE {
apQOSBgQueAvgLen INTEGER,
apQOSBgAvgBurst INTEGER,
apQOSBgPktLossRatio INTEGER,
apQOSBgAvgTransSpeed INTEGER,
apQOSBgSvcLoss INTEGER
}
apQOSBgQueAvgLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Background Queue average len."
::= { apQOSBackgroundStatisticsTableEntry 1 }
apQOSBgAvgBurst OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Background average burst ratio."
::= { apQOSBackgroundStatisticsTableEntry 2 }
apQOSBgPktLossRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Background packet loss ratio."
::= { apQOSBackgroundStatisticsTableEntry 3 }
apQOSBgAvgTransSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Background average TX speed."
::= { apQOSBackgroundStatisticsTableEntry 4 }
apQOSBgSvcLoss OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Background rob loss ratio.s"
::= { apQOSBackgroundStatisticsTableEntry 5 }
-------------------------------------------------
-------------------------------------------------
apQOSBestEffortStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSBestEffortStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap BestEffort QOS Statistics info table."
::={ apQOSBestEffortStatisticsObjects 1 }
apQOSBestEffortStatisticsTableEntry OBJECT-TYPE
SYNTAX ApQOSBestEffortStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap BestEffort QOS Statistics info table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSBestEffortStatisticsTable 1 }
ApQOSBestEffortStatisticsTableEntry ::=
SEQUENCE {
apQOSBeQueAvgLen INTEGER,
apQOSBeAvgBurst INTEGER,
apQOSBePktLossRatio INTEGER,
apQOSBeAvgTransSpeed INTEGER,
apQOSBeSvcLoss INTEGER
}
apQOSBeQueAvgLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS BestEffort Queue average len."
::= { apQOSBestEffortStatisticsTableEntry 1 }
apQOSBeAvgBurst OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS BestEffort average burst ratio."
::= { apQOSBestEffortStatisticsTableEntry 2 }
apQOSBePktLossRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS BestEffort packet loss ratio."
::= { apQOSBestEffortStatisticsTableEntry 3 }
apQOSBeAvgTransSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS BestEffort average TX speed."
::= { apQOSBestEffortStatisticsTableEntry 4 }
apQOSBeSvcLoss OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS BestEffort rob loss ratio."
::= { apQOSBestEffortStatisticsTableEntry 5 }
-------------------------------------------------
-------------------------------------------------
apQOSVoiceStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSVoiceStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap voice QOS Statistics info table."
::={ apQOSVoiceStatisticsObjects 1 }
apQOSVoiceStatisticsTableEntry OBJECT-TYPE
SYNTAX ApQOSVoiceStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap vioce QOS Statistics info table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSVoiceStatisticsTable 1 }
ApQOSVoiceStatisticsTableEntry ::=
SEQUENCE {
apQOSVoiceQueAvgLen INTEGER,
apQOSVoiceAvgBurst INTEGER,
apQOSVoicePktLossRatio INTEGER,
apQOSVoiceAvgTransSpeed INTEGER,
apQOSVoicePutThroughRatio INTEGER,
apQOSVoiceDropRatio INTEGER,
apQOSVoiceSvcLoss INTEGER,
apQOSVoiceExceedMaxUsersRequest Counter32
}
apQOSVoiceQueAvgLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS voice queue average length"
::= { apQOSVoiceStatisticsTableEntry 1 }
apQOSVoiceAvgBurst OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS voice average burst ratio"
::= { apQOSVoiceStatisticsTableEntry 2 }
apQOSVoicePktLossRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS voice packets loss ratio"
::= { apQOSVoiceStatisticsTableEntry 3 }
apQOSVoiceAvgTransSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS voice average TX speed"
::= { apQOSVoiceStatisticsTableEntry 4 }
apQOSVoicePutThroughRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS voice PutThrough Ratio"
::= { apQOSVoiceStatisticsTableEntry 5 }
apQOSVoiceDropRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS voice Drop Ratio"
::= { apQOSVoiceStatisticsTableEntry 6 }
apQOSVoiceSvcLoss OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS voice rob loss ratio"
::= { apQOSVoiceStatisticsTableEntry 7 }
apQOSVoiceExceedMaxUsersRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS decline counts of Voice user Exceed Max Users"
::= { apQOSVoiceStatisticsTableEntry 8 }
--------------------------------------------------
--------------------------------------------------
apQOSVideoStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApQOSVideoStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Video QOS Statistics info table."
::={ apQOSVideoStatisticsObjects 1 }
apQOSVideoStatisticsTableEntry OBJECT-TYPE
SYNTAX ApQOSVideoStatisticsTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap Video QOS Statistics info table."
INDEX { fsApMacAddr, fsApCfgRadioId }
::= { apQOSVideoStatisticsTable 1 }
ApQOSVideoStatisticsTableEntry ::=
SEQUENCE {
apQOSVideoQueAvgLen INTEGER,
apQOSVideoAvgBurst INTEGER,
apQOSVideoPktLossRatio INTEGER,
apQOSVideoAvgTransSpeed INTEGER,
apQOSVideoPutThroughRatio INTEGER,
apQOSVideoDropRatio INTEGER,
apQOSVideoSvcLoss INTEGER,
apQOSVideoExceedMaxUsersRequest Counter32
}
apQOSVideoQueAvgLen OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Video queue average length"
::= { apQOSVideoStatisticsTableEntry 1 }
apQOSVideoAvgBurst OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Video average burst ratio"
::= { apQOSVideoStatisticsTableEntry 2 }
apQOSVideoPktLossRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Video packets loss ratio"
::= { apQOSVideoStatisticsTableEntry 3 }
apQOSVideoAvgTransSpeed OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Video average TX speed"
::= { apQOSVideoStatisticsTableEntry 4 }
apQOSVideoPutThroughRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Video PutThrough Ratio"
::= { apQOSVideoStatisticsTableEntry 5 }
apQOSVideoDropRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Video Drop Ratio"
::= { apQOSVideoStatisticsTableEntry 6 }
apQOSVideoSvcLoss OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS Video rob loss ratio"
::= { apQOSVideoStatisticsTableEntry 7 }
apQOSVideoExceedMaxUsersRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AP QOS decline counts of Voice user Exceed Max Users"
::= { apQOSVideoStatisticsTableEntry 8 }
--**************************************************
--* ap QOS Statistics Info get ends *
--**************************************************
apWIDSRogueApInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApWIDSRogueApInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Rogue ap info."
::={ apWIDSRogueApInfoObjects 1 }
apWIDSRogueApInfoTableEntry OBJECT-TYPE
SYNTAX ApWIDSRogueApInfoTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ap WIDS Rogue Ap info table."
INDEX { fsRogueApMacAddr }
::= { apWIDSRogueApInfoTable 1 }
ApWIDSRogueApInfoTableEntry ::=
SEQUENCE {
fsRogueApMacAddr MacAddress,
fsRogueApRSSI INTEGER
}
fsRogueApMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Rogue Ap mac"
::= { apWIDSRogueApInfoTableEntry 1 }
fsRogueApRSSI OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Rogue Ap RSSI"
::= { apWIDSRogueApInfoTableEntry 2 }
--**************************************************
--* ap WIDS Rogue Info get ends *
--**************************************************
apStaTransSpeedTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApStaTransSpeedTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ap Sta Trans Speed info."
::={ apStaTransSpeedObjects 1 }
ApStaTransSpeedTableEntry OBJECT-TYPE
SYNTAX ApStaTransSpeedTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ap Sta Trans Speed table entry."
INDEX { fsApMacAddr}
::= { apStaTransSpeedTable 1 }
ApStaTransSpeedTableEntry ::=
SEQUENCE {
fsApMacAddr MacAddress,
fsApMacAddr_len INTEGER,
apStaUplinkTransSpeed1M Unsigned32,
apStaUplinkTransSpeed2M Unsigned32,
apStaUplinkTransSpeed5M Unsigned32,
apStaUplinkTransSpeed11M Unsigned32,
apStaUplinkTransSpeed6M Unsigned32,
apStaUplinkTransSpeed9M Unsigned32,
apStaUplinkTransSpeed12M Unsigned32,
apStaUplinkTransSpeed18M Unsigned32,
apStaUplinkTransSpeed24M Unsigned32,
apStaUplinkTransSpeed36M Unsigned32,
apStaUplinkTransSpeed48M Unsigned32,
apStaUplinkTransSpeed54M Unsigned32,
apStaDownlinkTransSpeed1M Unsigned32,
apStaDownlinkTransSpeed2M Unsigned32,
apStaDownlinkTransSpeed5M Unsigned32,
apStaDownlinkTransSpeed11M Unsigned32,
apStaDownlinkTransSpeed6M Unsigned32,
apStaDownlinkTransSpeed9M Unsigned32,
apStaDownlinkTransSpeed12M Unsigned32,
apStaDownlinkTransSpeed18M Unsigned32,
apStaDownlinkTransSpeed24M Unsigned32,
apStaDownlinkTransSpeed36M Unsigned32,
apStaDownlinkTransSpeed48M Unsigned32,
apStaDownlinkTransSpeed54M Unsigned32,
apStaUplinkTransSpeedMCS0 Unsigned32,
apStaUplinkTransSpeedMCS1 Unsigned32,
apStaUplinkTransSpeedMCS2 Unsigned32,
apStaUplinkTransSpeedMCS3 Unsigned32,
apStaUplinkTransSpeedMCS4 Unsigned32,
apStaUplinkTransSpeedMCS5 Unsigned32,
apStaUplinkTransSpeedMCS6 Unsigned32,
apStaUplinkTransSpeedMCS7 Unsigned32,
apStaUplinkTransSpeedMCS8 Unsigned32,
apStaUplinkTransSpeedMCS9 Unsigned32,
apStaUplinkTransSpeedMCS10 Unsigned32,
apStaUplinkTransSpeedMCS11 Unsigned32,
apStaUplinkTransSpeedMCS12 Unsigned32,
apStaUplinkTransSpeedMCS13 Unsigned32,
apStaUplinkTransSpeedMCS14 Unsigned32,
apStaUplinkTransSpeedMCS15 Unsigned32,
apStaUplinkTransSpeedMCS16 Unsigned32,
apStaUplinkTransSpeedMCS17 Unsigned32,
apStaUplinkTransSpeedMCS18 Unsigned32,
apStaUplinkTransSpeedMCS19 Unsigned32,
apStaUplinkTransSpeedMCS20 Unsigned32,
apStaUplinkTransSpeedMCS21 Unsigned32,
apStaUplinkTransSpeedMCS22 Unsigned32,
apStaUplinkTransSpeedMCS23 Unsigned32,
apStaUplinkTransSpeedMCS24 Unsigned32,
apStaUplinkTransSpeedMCS25 Unsigned32,
apStaUplinkTransSpeedMCS26 Unsigned32,
apStaUplinkTransSpeedMCS27 Unsigned32,
apStaUplinkTransSpeedMCS28 Unsigned32,
apStaUplinkTransSpeedMCS29 Unsigned32,
apStaUplinkTransSpeedMCS30 Unsigned32,
apStaUplinkTransSpeedMCS31 Unsigned32,
apStaDownlinkTransSpeedMCS0 Unsigned32,
apStaDownlinkTransSpeedMCS1 Unsigned32,
apStaDownlinkTransSpeedMCS2 Unsigned32,
apStaDownlinkTransSpeedMCS3 Unsigned32,
apStaDownlinkTransSpeedMCS4 Unsigned32,
apStaDownlinkTransSpeedMCS5 Unsigned32,
apStaDownlinkTransSpeedMCS6 Unsigned32,
apStaDownlinkTransSpeedMCS7 Unsigned32,
apStaDownlinkTransSpeedMCS8 Unsigned32,
apStaDownlinkTransSpeedMCS9 Unsigned32,
apStaDownlinkTransSpeedMCS10 Unsigned32,
apStaDownlinkTransSpeedMCS11 Unsigned32,
apStaDownlinkTransSpeedMCS12 Unsigned32,
apStaDownlinkTransSpeedMCS13 Unsigned32,
apStaDownlinkTransSpeedMCS14 Unsigned32,
apStaDownlinkTransSpeedMCS15 Unsigned32,
apStaDownlinkTransSpeedMCS16 Unsigned32,
apStaDownlinkTransSpeedMCS17 Unsigned32,
apStaDownlinkTransSpeedMCS18 Unsigned32,
apStaDownlinkTransSpeedMCS19 Unsigned32,
apStaDownlinkTransSpeedMCS20 Unsigned32,
apStaDownlinkTransSpeedMCS21 Unsigned32,
apStaDownlinkTransSpeedMCS22 Unsigned32,
apStaDownlinkTransSpeedMCS23 Unsigned32,
apStaDownlinkTransSpeedMCS24 Unsigned32,
apStaDownlinkTransSpeedMCS25 Unsigned32,
apStaDownlinkTransSpeedMCS26 Unsigned32,
apStaDownlinkTransSpeedMCS27 Unsigned32,
apStaDownlinkTransSpeedMCS28 Unsigned32,
apStaDownlinkTransSpeedMCS29 Unsigned32,
apStaDownlinkTransSpeedMCS30 Unsigned32,
apStaDownlinkTransSpeedMCS31 Unsigned32,
}
apStaUplinkTransSpeed1M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 1 }
apStaUplinkTransSpeed2M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 2 }
apStaUplinkTransSpeed5M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 3 }
apStaUplinkTransSpeed11M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 4 }
apStaUplinkTransSpeed6M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 5 }
apStaUplinkTransSpeed9M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 6 }
apStaUplinkTransSpeed12M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 7 }
apStaUplinkTransSpeed18M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 8 }
apStaUplinkTransSpeed24M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 9 }
apStaUplinkTransSpeed36M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 10 }
apStaUplinkTransSpeed48M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 11 }
apStaUplinkTransSpeed54M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta uplink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 12 }
apStaDownlinkTransSpeed1M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 13 }
apStaDownlinkTransSpeed2M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 14 }
apStaDownlinkTransSpeed5M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 15 }
apStaDownlinkTransSpeed11M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 16 }
apStaDownlinkTransSpeed6M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 17 }
apStaDownlinkTransSpeed9M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 18 }
apStaDownlinkTransSpeed12M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 19 }
apStaDownlinkTransSpeed18M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 20 }
apStaDownlinkTransSpeed24M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 21 }
apStaDownlinkTransSpeed36M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 22 }
apStaDownlinkTransSpeed48M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 23 }
apStaDownlinkTransSpeed54M OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed pkt stat."
::= { ApStaTransSpeedTableEntry 24 }
apStaUplinkTransSpeedMCS0 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 25 }
apStaUplinkTransSpeedMCS1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 26 }
apStaUplinkTransSpeedMCS2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 27 }
apStaUplinkTransSpeedMCS3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 28 }
apStaUplinkTransSpeedMCS4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 29 }
apStaUplinkTransSpeedMCS5 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 30 }
apStaUplinkTransSpeedMCS6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 31 }
apStaUplinkTransSpeedMCS7 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 32 }
apStaUplinkTransSpeedMCS8 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 33 }
apStaUplinkTransSpeedMCS9 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 34 }
apStaUplinkTransSpeedMCS10 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 35 }
apStaUplinkTransSpeedMCS11 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 36 }
apStaUplinkTransSpeedMCS12 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 37 }
apStaUplinkTransSpeedMCS13 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 38 }
apStaUplinkTransSpeedMCS14 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 39 }
apStaUplinkTransSpeedMCS15 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 40 }
apStaUplinkTransSpeedMCS16 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 41 }
apStaUplinkTransSpeedMCS17 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 42 }
apStaUplinkTransSpeedMCS18 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 43 }
apStaUplinkTransSpeedMCS19 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 44 }
apStaUplinkTransSpeedMCS20 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 45 }
apStaUplinkTransSpeedMCS21 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 46 }
apStaUplinkTransSpeedMCS22 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 47 }
apStaUplinkTransSpeedMCS23 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 48 }
apStaUplinkTransSpeedMCS24 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 49 }
apStaUplinkTransSpeedMCS25 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 50 }
apStaUplinkTransSpeedMCS26 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 51 }
apStaUplinkTransSpeedMCS27 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 52 }
apStaUplinkTransSpeedMCS28 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 53 }
apStaUplinkTransSpeedMCS29 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 54 }
apStaUplinkTransSpeedMCS30 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 55 }
apStaUplinkTransSpeedMCS31 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Uplink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 56 }
apStaDownlinkTransSpeedMCS0 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 57 }
apStaDownlinkTransSpeedMCS1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 58 }
apStaDownlinkTransSpeedMCS2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 59 }
apStaDownlinkTransSpeedMCS3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 60 }
apStaDownlinkTransSpeedMCS4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 61 }
apStaDownlinkTransSpeedMCS5 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 62 }
apStaDownlinkTransSpeedMCS6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 63 }
apStaDownlinkTransSpeedMCS7 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 64 }
apStaDownlinkTransSpeedMCS8 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 65 }
apStaDownlinkTransSpeedMCS9 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 66 }
apStaDownlinkTransSpeedMCS10 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 67 }
apStaDownlinkTransSpeedMCS11 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 68 }
apStaDownlinkTransSpeedMCS12 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 69 }
apStaDownlinkTransSpeedMCS13 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 70 }
apStaDownlinkTransSpeedMCS14 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 71 }
apStaDownlinkTransSpeedMCS15 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 72 }
apStaDownlinkTransSpeedMCS16 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 73 }
apStaDownlinkTransSpeedMCS17 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 74 }
apStaDownlinkTransSpeedMCS18 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 75 }
apStaDownlinkTransSpeedMCS19 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 76 }
apStaDownlinkTransSpeedMCS20 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 77 }
apStaDownlinkTransSpeedMCS21 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 78 }
apStaDownlinkTransSpeedMCS22 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 79 }
apStaDownlinkTransSpeedMCS23 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 80 }
apStaDownlinkTransSpeedMCS24 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 81 }
apStaDownlinkTransSpeedMCS25 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 82 }
apStaDownlinkTransSpeedMCS26 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 83 }
apStaDownlinkTransSpeedMCS27 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 84 }
apStaDownlinkTransSpeedMCS28 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 85 }
apStaDownlinkTransSpeedMCS29 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 86 }
apStaDownlinkTransSpeedMCS30 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 87 }
apStaDownlinkTransSpeedMCS31 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap sta Downlink transpeed MCS stat."
::= { ApStaTransSpeedTableEntry 88 }
--**************************************************
--* Ap Sta Trans Speed info get ends *
--**************************************************
apStationAssoRssiTable OBJECT-TYPE
SYNTAX SEQUENCE OF apStationAssoRssiTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Ap Station Asso Rssi info."
::={ apStationAssoRssiObjects 1 }
apStationAssoRssiTableEntry OBJECT-TYPE
SYNTAX apStationAssoRssiTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"fs AC MGMT station association rssi entry."
INDEX { fsApMacAddr}
::= { apStationAssoRssiTable 1 }
apStationAssoRssiTableEntry ::=
SEQUENCE {
fsApMacAddr MacAddress,
fsApMacAddr_len INTEGER,
apStationAssoRxSignalStrength1 Counter32,
apStationAssoRxSignalStrength2 Counter32,
apStationAssoRxSignalStrength3 Counter32,
apStationAssoRxSignalStrength4 Counter32,
apStationAssoRxSignalStrength5 Counter32,
apStationAssoRxSignalStrength6 Counter32,
apStationAssoRxSignalStrength7 Counter32,
apStationAssoRxSignalStrength8 Counter32,
apStationAssoRxSignalStrength9 Counter32,
apStationAssoRxSignalStrength10 Counter32,
apStationAssoRxSignalStrength11 Counter32,
apStationAssoRxSignalStrength12 Counter32,
apStationAssoRxSignalStrength13 Counter32,
apStationAssoRxSignalStrength14 Counter32,
apStationAssoRxSignalStrength15 Counter32,
}
apStationAssoRxSignalStrength1 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,rssi >-30dBm."
::= { apStationAssoRssiTableEntry 1 }
apStationAssoRxSignalStrength2 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-35dbm<X<=-30dBm."
::= { apStationAssoRssiTableEntry 2 }
apStationAssoRxSignalStrength3 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-40dbm<X<=-35dBm."
::= { apStationAssoRssiTableEntry 3 }
apStationAssoRxSignalStrength4 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-45dbm<X<=-40dBm."
::= { apStationAssoRssiTableEntry 4 }
apStationAssoRxSignalStrength5 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-50dbm<X<=-45dBm."
::= { apStationAssoRssiTableEntry 5 }
apStationAssoRxSignalStrength6 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-55dbm<X<=-50dBm."
::= { apStationAssoRssiTableEntry 6 }
apStationAssoRxSignalStrength7 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-60dbm<X<=-55dBm."
::= { apStationAssoRssiTableEntry 7 }
apStationAssoRxSignalStrength8 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-65dbm<X<=-60dBm."
::= { apStationAssoRssiTableEntry 8 }
apStationAssoRxSignalStrength9 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-70dbm<X<=-65dBm."
::= { apStationAssoRssiTableEntry 9 }
apStationAssoRxSignalStrength10 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-75dbm<X<=-70dBm."
::= { apStationAssoRssiTableEntry 10 }
apStationAssoRxSignalStrength11 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-80dbm<X<=-75dBm."
::= { apStationAssoRssiTableEntry 11 }
apStationAssoRxSignalStrength12 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-85dbm<X<=-80dBm."
::= { apStationAssoRssiTableEntry 12 }
apStationAssoRxSignalStrength13 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-90dbm<X<=-85dBm."
::= { apStationAssoRssiTableEntry 13 }
apStationAssoRxSignalStrength14 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,-95dbm<X<=-90dBm."
::= { apStationAssoRssiTableEntry 14 }
apStationAssoRxSignalStrength15 OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ap recv sta pkt rssi stat,X<=-95dBm."
::= { apStationAssoRssiTableEntry 15 }
--**************************************************
--* Ap Sta Trans Speed info get ends *
--**************************************************
-------------------------------------------------
-------------------------------------------------
END
View Git Blame Copy Permalink