1242 lines
40 KiB
Plaintext
1242 lines
40 KiB
Plaintext
-- *****************************************************************
|
|
-- FS-RSTP-MIB.mib: FS RSTP MIB file
|
|
--
|
|
-- March 2002, Wuzg
|
|
--
|
|
-- Copyright (c) 2002 by FS.COM Inc..
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
--
|
|
|
|
FS-RSTP-MSTP-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
TimeTicks,
|
|
Integer32,
|
|
Counter32
|
|
FROM SNMPv2-SMI
|
|
TruthValue,
|
|
DisplayString
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
IfIndex,
|
|
ConfigStatus
|
|
FROM FS-TC
|
|
BridgeId
|
|
FROM BRIDGE-MIB
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB
|
|
fsMgmt
|
|
FROM FS-SMI;
|
|
|
|
fsStpMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200203200000Z"
|
|
ORGANIZATION "FS.COM Inc.."
|
|
CONTACT-INFO
|
|
"
|
|
Tel: 400-865-2852
|
|
|
|
E-mail: https://www.fs.com/live_chat_service_mail.html"
|
|
DESCRIPTION
|
|
"This module defines fs stp mibs."
|
|
REVISION "200203200000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { fsMgmt 16}
|
|
|
|
fsStpMIBObjects OBJECT IDENTIFIER ::= { fsStpMIB 1 }
|
|
fsRstpMIBObjects OBJECT IDENTIFIER ::= { fsStpMIB 2 }
|
|
fsMstpMIBObjects OBJECT IDENTIFIER ::= { fsStpMIB 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- extend of stp
|
|
-- -------------------------------------------------------------
|
|
fsSysStpStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allow of enabling or disabling the Spanning
|
|
Tree Protocol in the system, this will avoid the circle
|
|
exist in the net environment, then avoid the broad cast
|
|
storm. and when set its value to enable(1) will cause a
|
|
short time that the station can not connect the agent,
|
|
waitting for the topology become stable."
|
|
DEFVAL { disabled }
|
|
::= { fsStpMIBObjects 1 }
|
|
|
|
fsSysStpReset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allow of resetting all Spanning Tree Protocol
|
|
parameter reset to default settings. set its value to any
|
|
but 0, will cause agent reset the parameters, set it to 0
|
|
will cause no action. this operation may cause some interval
|
|
the station can not connect the agent depending on the
|
|
parameters previous set."
|
|
::= { fsStpMIBObjects 2 }
|
|
|
|
fsStpExtPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FSStpExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains port-specific Spanning Tree
|
|
extend information."
|
|
::= { fsStpMIBObjects 3 }
|
|
|
|
fsStpExtPortEntry OBJECT-TYPE
|
|
SYNTAX FSStpExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Spanning Tree extend information maintained by
|
|
each port."
|
|
INDEX { fsStpPortIfIndex }
|
|
::= { fsStpExtPortTable 1 }
|
|
|
|
FSStpExtPortEntry ::=
|
|
SEQUENCE {
|
|
fsStpPortIfIndex
|
|
IfIndex,
|
|
fsStpPortAdminPathCost
|
|
INTEGER,
|
|
fsStpPortOperPathCost
|
|
INTEGER,
|
|
fsStpPortRole
|
|
INTEGER
|
|
-- fsStpPortIfRunSTP
|
|
-- TruthValue
|
|
}
|
|
fsStpPortIfIndex OBJECT-TYPE
|
|
SYNTAX IfIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"include only physical port and trunk port "
|
|
::= { fsStpExtPortEntry 1 }
|
|
|
|
fsStpPortAdminPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (0..200000000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1990 recommends that the
|
|
default value of this parameter be in inverse
|
|
proportion to the speed of the attached LAN.
|
|
Setting this value to 0 indicates that port's real
|
|
path cost will be automaticly assigned by system
|
|
according to duplex and speed of the port.Setting
|
|
this value to other value and system will assigned this
|
|
value to the port."
|
|
DEFVAL{0}
|
|
::= { fsStpExtPortEntry 2 }
|
|
|
|
fsStpPortOperPathCost OBJECT-TYPE
|
|
SYNTAX INTEGER (1..200000000)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Actual oper value of port cost."
|
|
::= { fsStpExtPortEntry 3 }
|
|
|
|
fsStpPortRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabledPort(1),
|
|
alternatePort(2),
|
|
backupPort(3),
|
|
rootPort(4),
|
|
designatedPort(5),
|
|
masterPort(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Actual role of port in stp."
|
|
::= { fsStpExtPortEntry 4 }
|
|
|
|
--fsStpPortIfRunSTP OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "When the value is true the port will take part in the spanning tree algorithm,
|
|
-- that is, if the topology of a port is changed will this be sensed by the algorithm
|
|
-- or not."
|
|
-- ::= { fsStpExtPortEntry 5 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- RSTP / CIST ieee 802.1s-d14-1 12.8.1
|
|
-- -------------------------------------------------------------
|
|
-- Addition to the dot1dStp group
|
|
fsStpVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stpCompatible(0),
|
|
rstp(2),
|
|
mstp(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of Spanning Tree Protocol the bridge is
|
|
currently running. The value 'stpCompatible(0)'
|
|
indicates the Spanning Tree Protocol specified in
|
|
IEEE 802.1D , 'rstp(2)' indicates the Rapid Spanning
|
|
Tree Protocol specified in IEEE 802.1w mstp(3) indicates
|
|
the Multiple spanning tree protocol specified in
|
|
IEEE 802.1s. New value may be defined as future versions
|
|
of the protocol become available."
|
|
REFERENCE
|
|
"IEEE 802.1w clause 14.8.1, 17.12, 17.16.1"
|
|
DEFVAL { mstp }
|
|
::= { fsRstpMIBObjects 1 }
|
|
|
|
fsStpTxHoldCount OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value used by the Port Transmit state machine to limit
|
|
the maximum transmission rate."
|
|
REFERENCE
|
|
"IEEE 802.1w clause 17.16.6"
|
|
DEFVAL { 3 }
|
|
::= { fsRstpMIBObjects 2 }
|
|
|
|
fsStpPathCostDefault OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
stp8021d1998(1),
|
|
stp8021t2001(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version of the Spanning Tree default Path Costs that
|
|
are to be used by this Bridge. A value of 8021d1998(1)
|
|
uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998.
|
|
A value of stp8021t2001(2) uses the 32-bit default Path
|
|
Costs from IEEE Std. 802.1t."
|
|
REFERENCE
|
|
"IEEE 802.1D & 802.1t Table 8-5"
|
|
::= { fsRstpMIBObjects 3 }
|
|
|
|
fsRstpExtPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FSRstpExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains port-specific Rapid Spanning Tree
|
|
information."
|
|
::= { fsRstpMIBObjects 4 }
|
|
|
|
fsRstpExtPortEntry OBJECT-TYPE
|
|
SYNTAX FSRstpExtPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A list of Rapid Spanning Tree information maintained by
|
|
each port."
|
|
INDEX { fsRstpExtPortIfIndex }
|
|
::= { fsRstpExtPortTable 1 }
|
|
|
|
FSRstpExtPortEntry ::=
|
|
SEQUENCE {
|
|
fsRstpExtPortIfIndex
|
|
IfIndex,
|
|
fsStpPortProtocolMigration
|
|
TruthValue,
|
|
fsStpPortAdminEdgePort
|
|
TruthValue,
|
|
fsStpPortOperEdgePort
|
|
TruthValue,
|
|
fsStpPortAdminPointToPoint
|
|
INTEGER,
|
|
fsStpPortOperPointToPoint
|
|
TruthValue,
|
|
fsStpPortBpduGuard
|
|
EnabledStatus,
|
|
fsStpPortBpduFilter
|
|
EnabledStatus
|
|
}
|
|
fsRstpExtPortIfIndex OBJECT-TYPE
|
|
SYNTAX IfIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"include only physical port and trunk port "
|
|
::= { fsRstpExtPortEntry 1 }
|
|
|
|
fsStpPortProtocolMigration OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When operating in RSTP (version 2) mode, writing TRUE(1)
|
|
to this object forces this port to transmit RSTP BPDUs.
|
|
Any other operation on this object has no effect and
|
|
it always returns FALSE(2) when read."
|
|
REFERENCE
|
|
"IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
|
|
::= { fsRstpExtPortEntry 2 }
|
|
|
|
fsStpPortAdminEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative value of the Edge Port parameter. A
|
|
value of TRUE(1) indicates that this port should be
|
|
assumed as an edge-port and a value of FALSE(2) indicates
|
|
that this port should be assumed as a non-edge-port."
|
|
REFERENCE
|
|
"IEEE 802.1t clause 14.8.2, 18.3.3"
|
|
::= { fsRstpExtPortEntry 3 }
|
|
|
|
fsStpPortOperEdgePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational value of the Edge Port parameter. The
|
|
object is initialized to the value of
|
|
fsStpPortAdminEdgePort and is set FALSE on reception of
|
|
a BPDU."
|
|
REFERENCE
|
|
"IEEE 802.1t clause 14.8.2, 18.3.4"
|
|
::= { fsRstpExtPortEntry 4 }
|
|
|
|
fsStpPortAdminPointToPoint OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forceTrue(0),
|
|
forceFalse(1),
|
|
auto(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative point-to-point status of the LAN segment
|
|
attached to this port. A value of forceTrue(0) indicates that
|
|
this port should always be treated as if it is connected to
|
|
a point-to-point link. A value of forceFalse(1) indicates
|
|
that this port should be treated as having a shared media
|
|
connection. A value of auto(2) indicates that this port is
|
|
considered to have a point-to-point link if it is an Aggregator
|
|
and all of its members are aggregatable, or if the MAC entity
|
|
is configured for full duplex operation, either through
|
|
auto-negotiation or by management means."
|
|
REFERENCE
|
|
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
|
|
::= { fsRstpExtPortEntry 5 }
|
|
|
|
fsStpPortOperPointToPoint OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational point-to-point status of the LAN segment
|
|
attached to this port. It indicates whether a port is
|
|
considered to have a point-to-point connection or not.
|
|
The value is determined by management or by auto-detection,
|
|
as described in the fsStpPortAdminPointToPoint object."
|
|
REFERENCE
|
|
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
|
|
::= { fsRstpExtPortEntry 6 }
|
|
|
|
fsStpPortBpduGuard OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"
|
|
The BPDU guard feature provides a secure response to invalid configurations because
|
|
you must manually put the port back in service. Use the BPDU guard feature in a
|
|
service-provider network to prevent an access port from participating in the
|
|
spanning tree.
|
|
|
|
When the port receives a BPDU, it is put in the error-disabled state if you enable
|
|
BPDU guard feature of this port.
|
|
"
|
|
::= { fsRstpExtPortEntry 7 }
|
|
|
|
fsStpPortBpduFilter OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"It will prevent the port from sending or receiving BPDUs if you enable
|
|
BPDU filter feature of this port. "
|
|
::= { fsRstpExtPortEntry 8 }
|
|
|
|
fsStpBpduGuard OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If you enable Global BPDU guard feature ,ports which is EdgePort will
|
|
is put in the error-disabled state When thest ports receives a BPDU."
|
|
::= { fsRstpMIBObjects 5 }
|
|
|
|
fsStpBpduFilter OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If you enable Global BPDU filter feature ,ports which is EdgePort will
|
|
be prevented the port from sending or receiving BPDUs."
|
|
::= { fsRstpMIBObjects 6 }
|
|
|
|
--MSTP addition
|
|
fsStpCistRegionRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge Identifier of the current CIST Regional Root."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.1.1.3"
|
|
::= { fsRstpMIBObjects 7 }
|
|
|
|
fsStpCistPathCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The CIST path cost from the transmitting Bridge to the CIST Regional Root.."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.1.1.3"
|
|
::= { fsRstpMIBObjects 8 }
|
|
|
|
|
|
--fsStpPortCistTable OBJECT-TYPE
|
|
-- SYNTAX SEQUENCE OF FSStpPortCistEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A table containing the spanning tree port path cost
|
|
-- configuration when stpxSpanningTreePathCostMode is
|
|
-- long(2),
|
|
|
|
-- If the value of stpxSpanningTreePathCostMode is short(1),
|
|
-- this table is not instantiated."
|
|
-- ::= { fsRstpMIBObjects 9 }
|
|
|
|
--fsStpPortCistEntry OBJECT-TYPE
|
|
-- SYNTAX FSStpPortCistEntry
|
|
-- MAX-ACCESS not-accessible
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "A conceptual row containing the spanning tree port path cost
|
|
-- configuration."
|
|
-- AUGMENTS { fsRstpExtPortEntry }
|
|
-- ::= { fsStpPortCistTable 1 }
|
|
|
|
--FSStpPortCistEntry ::= SEQUENCE {
|
|
-- fsStpPortCistRegionRoot BridgeId,
|
|
-- fsStpPortCistPathCost Counter32
|
|
-- fsStpPortHelloTime Integer32
|
|
--}
|
|
|
|
--fsStpPortCistRegionRoot OBJECT-TYPE
|
|
-- SYNTAX BridgeId
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Bridge Identifier of the current CIST Regional Root."
|
|
-- REFERENCE
|
|
-- "IEEE 802.1s-d14-1: Section 12.8.2.1.3"
|
|
-- ::= { fsStpPortCistEntry 1}
|
|
|
|
|
|
--fsStpPortCistPathCost OBJECT-TYPE
|
|
-- SYNTAX Counter32
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The CIST path cost from the transmitting Bridge to the CIST Regional Root."
|
|
-- REFERENCE
|
|
-- "IEEE 802.1s-d14-1: Section 12.8.2.1.3"
|
|
-- ::= { fsStpPortCistEntry 2}
|
|
|
|
|
|
--fsStpPortHelloTime OBJECT-TYPE
|
|
-- SYNTAX Integer32
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The administrative value of Hello Time for the Port."
|
|
-- REFERENCE
|
|
-- "IEEE 802.1s-d14-1: Section 12.8.2.1.3"
|
|
-- ::= { fsStpPortCistEntry 3}
|
|
|
|
-- -------------------------------------------------------------
|
|
-- MSTP / MSTI 802.1s-d14-1 12.8.1
|
|
-- -------------------------------------------------------------
|
|
fsStpMstiMaxInstanceNumber OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum MST (Multiple Spanning Tree) instance id,
|
|
that are supported by the device for the MST Protocol."
|
|
::= { fsMstpMIBObjects 1}
|
|
|
|
fsStpMstiRegionName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational MST region name."
|
|
::= { fsMstpMIBObjects 2}
|
|
|
|
fsStpMstiRegionRevision OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational MST region version."
|
|
::= { fsMstpMIBObjects 3 }
|
|
|
|
fsStpMstiMaxHopNumber OBJECT-TYPE
|
|
SYNTAX Integer32 (1..40)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational MST region max hop number."
|
|
DEFVAL { 20 }
|
|
::= { fsMstpMIBObjects 4 }
|
|
|
|
|
|
fsStpMstiInstanceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FSStpMstiInstanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains MST instance information with
|
|
one entry for each MST instance numbered from 0
|
|
to fsStpxMSTMaxInstanceNumber."
|
|
::= {fsMstpMIBObjects 5 }
|
|
|
|
fsStpMstiInstanceEntry OBJECT-TYPE
|
|
SYNTAX FSStpMstiInstanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row containing the MST instance
|
|
information."
|
|
INDEX { fsStpMstiInstanceIndex }
|
|
::= { fsStpMstiInstanceTable 1 }
|
|
|
|
FSStpMstiInstanceEntry ::= SEQUENCE {
|
|
fsStpMstiInstanceIndex Integer32,
|
|
fsStpMstiInstanceVlansAddMapped OCTET STRING,
|
|
fsStpMstiInstanceVlansDeleteMapped OCTET STRING,
|
|
fsStpMstiInstanceVlansGetMapped OCTET STRING,
|
|
fsStpMstiInstanceRemainingHopCount Integer32,
|
|
fsStpMstiPriority Integer32,
|
|
-- fsStpMstiBridgeId Integer32,
|
|
fsStpMstiTimeSinceTopologyChange TimeTicks,
|
|
fsStpMstiTopChanges Integer32,
|
|
-- fsStpMstiTopChanged TruthValue,
|
|
fsStpMstiDesignatedRoot BridgeId,
|
|
fsStpMstiRootCost Integer32,
|
|
fsStpMstiRootPort Integer32,
|
|
fsStpMstiInstanceEntryStatus ConfigStatus
|
|
|
|
}
|
|
|
|
fsStpMstiInstanceIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..64)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An integer that uniquely identifies an MST instance
|
|
from 0 to the object value of fsStpMstiMaxInstanceNumber."
|
|
::= {fsStpMstiInstanceEntry 1 }
|
|
|
|
fsStpMstiInstanceVlansAddMapped OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (512))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN. The
|
|
first octet corresponds to VLANs with VlanIndex values
|
|
of 0 through 7; the second octet to VLANs 8 through
|
|
15; etc. The most significant bit of each octet
|
|
corresponds to the lowest value VlanIndex in that octet.
|
|
|
|
For each VLAN, if it is mapped to this MST instance,
|
|
then the bit corresponding to that VLAN is set to '1'."
|
|
::= {fsStpMstiInstanceEntry 2 }
|
|
|
|
fsStpMstiInstanceVlansDeleteMapped OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (512))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN. The
|
|
first octet corresponds to VLANs with VlanIndex values
|
|
of 0 through 7; the second octet to VLANs 8 through
|
|
15; etc. The most significant bit of each octet
|
|
corresponds to the lowest value VlanIndex in that octet.
|
|
|
|
For each VLAN, if it is mapped to this MST instance,
|
|
then the bit corresponding to that VLAN is set to '1'."
|
|
::= {fsStpMstiInstanceEntry 3 }
|
|
|
|
fsStpMstiInstanceVlansGetMapped OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (512))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN. The
|
|
first octet corresponds to VLANs with VlanIndex values
|
|
of 0 through 7; the second octet to VLANs 8 through
|
|
15; etc. The most significant bit of each octet
|
|
corresponds to the lowest value VlanIndex in that octet.
|
|
|
|
For each VLAN, if it is mapped to this MST instance,
|
|
then the bit corresponding to that VLAN is set to '1'."
|
|
::= {fsStpMstiInstanceEntry 4 }
|
|
|
|
fsStpMstiInstanceRemainingHopCount OBJECT-TYPE
|
|
SYNTAX Integer32 (0..40)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remaining hop count for this MST instance."
|
|
::= {fsStpMstiInstanceEntry 5 }
|
|
|
|
fsStpMstiPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge priority for the spanning tree instance identified
|
|
by the MSTID."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.1.2.3."
|
|
DEFVAL { 32768 }
|
|
::= {fsStpMstiInstanceEntry 6 }
|
|
|
|
--fsStpMstiBridgeId OBJECT-TYPE
|
|
-- SYNTAX BridgeId
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Bridge Identifier for the spanning tree instance identified
|
|
-- by the MSTID."
|
|
-- REFERENCE
|
|
-- "IEEE 802.1s-d14-1: Section 12.8.1.2.3."
|
|
|
|
-- ::= {fsStpMstiInstanceEntry 5 }
|
|
|
|
fsStpMstiTimeSinceTopologyChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Ccount in (in hundredths of a second) of the time elapsed since tcWhile (13.21) was last
|
|
non-zero for any Port for the given MSTI."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.1.2.3."
|
|
|
|
::= {fsStpMstiInstanceEntry 7 }
|
|
|
|
fsStpMstiTopChanges OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of the times tcWhile (13.21) has been non-zero for any Port for the
|
|
given MSTI since the Bridge was powered on or initialized."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.1.2.3."
|
|
|
|
::= {fsStpMstiInstanceEntry 8 }
|
|
|
|
--fsStpMstiTopChanged OBJECT-TYPE
|
|
-- SYNTAX TruthValue
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "True if tcWhile is non-zero for any Port for the given MST."
|
|
-- REFERENCE
|
|
-- "IEEE 802.1s-d14-1: Section 12.8.1.2.3."
|
|
|
|
-- ::= {fsStpMstiInstanceEntry 8 }
|
|
|
|
fsStpMstiDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge Identifier of the Root Bridge for the spanning tree instance
|
|
identified by the MSTID."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.1.2.3."
|
|
|
|
::= {fsStpMstiInstanceEntry 9 }
|
|
|
|
fsStpMstiRootCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path cost from the transmitting Bridge to the Root Bridge for the
|
|
spanning tree instance identified by the MSTID."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.1.2.3."
|
|
|
|
::= {fsStpMstiInstanceEntry 10 }
|
|
|
|
fsStpMstiRootPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Root Port for the spanning tree instance identified by the MSTID."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.1.2.3."
|
|
|
|
::= {fsStpMstiInstanceEntry 11 }
|
|
|
|
fsStpMstiInstanceEntryStatus OBJECT-TYPE
|
|
SYNTAX ConfigStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of this entry, set this object to valid will creat a entry,
|
|
and set its value to invalid will delete this entry."
|
|
::= { fsStpMstiInstanceEntry 12 }
|
|
|
|
fsStpPortMstiInstanceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FSStpPortMstiInstanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains MST instance information with
|
|
one entry for each MST instance numbered from 0
|
|
to fsStpxMSTMaxInstanceNumber."
|
|
::= {fsMstpMIBObjects 6 }
|
|
|
|
fsStpPortMstiInstanceEntry OBJECT-TYPE
|
|
SYNTAX FSStpPortMstiInstanceEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A conceptual row containing pthe MST instance
|
|
information of a bridge port."
|
|
INDEX { fsStpMstiInstanceIndex, fsStpPortMstiIndex}
|
|
::= { fsStpPortMstiInstanceTable 1 }
|
|
|
|
FSStpPortMstiInstanceEntry ::= SEQUENCE {
|
|
fsStpPortMstiIndex Integer32,
|
|
-- fsStpPortMstiUpTime TimeTicks,
|
|
fsStpPortMstiState INTEGER,
|
|
-- fsStpPortMstiEnable INTEGER,
|
|
-- fsStpPortMstiPortId OCTET STRING,
|
|
fsStpPortMstiAdminPathCost Integer32,
|
|
fsStpPortMstiOperPathCost Counter32,
|
|
fsStpPortMstiPriority Integer32,
|
|
fsStpPortMstiDesignatedRoot BridgeId,
|
|
fsStpPortMstiDesignatedCost Integer32,
|
|
fsStpPortMstiDesignatedBridge BridgeId,
|
|
fsStpPortMstiDesignatedPort OCTET STRING,
|
|
fsStpPortMstiPortRole INTEGER,
|
|
fsStpPortMstiPortForwardTransitions Integer32
|
|
|
|
}
|
|
|
|
fsStpPortMstiIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of dot1dBasePort (i.e. dot1dBridge.1.4)
|
|
for the bridge port."
|
|
REFERENCE
|
|
"dot1dBasePort is defined in RFC1493."
|
|
|
|
::= {fsStpPortMstiInstanceEntry 1 }
|
|
|
|
--fsStpPortMstiUpTime OBJECT-TYPE
|
|
-- SYNTAX TimeTicks
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "Count in seconds of the time elapsed since the Port was last reset or initialized."
|
|
-- REFERENCE
|
|
-- "IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
|
|
-- ::= {fsStpPortMstiInstanceEntry 2 }
|
|
|
|
fsStpPortMstiState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
blocking(2),
|
|
listening(3),
|
|
learning(4),
|
|
forwarding(5),
|
|
broken(6),
|
|
discard(7)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of the Port."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
|
|
::= {fsStpPortMstiInstanceEntry 2 }
|
|
|
|
--fsStpPortMstiEnable OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- enabled(1),
|
|
-- disabled(2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The enabled/disabled status of the port."
|
|
-- REFERENCE
|
|
-- "IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
|
|
-- ::= {fsStpPortMstiInstanceEntry 3 }
|
|
|
|
--fsStpPortMstiPortId OBJECT-TYPE
|
|
-- SYNTAX OCTET STRING (SIZE (2))
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The Port Identifier of the port on the Designated
|
|
-- Bridge for this port's segment."
|
|
-- REFERENCE
|
|
-- "IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
|
|
-- ::= {fsStpPortMstiInstanceEntry 4 }
|
|
|
|
fsStpPortMstiAdminPathCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The contribution of this port to the path cost of
|
|
paths towards the spanning tree root which include
|
|
this port. 802.1D-1990 recommends that the
|
|
default value of this parameter be in inverse
|
|
proportion to the speed of the attached LAN.
|
|
Setting this value to 0 indicates that port's real
|
|
path cost will be automaticly assigned by system
|
|
according to duplex and speed of the port.Setting
|
|
this value to other value and system will assigned this
|
|
value to the port."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
|
|
::= {fsStpPortMstiInstanceEntry 3 }
|
|
|
|
fsStpPortMstiOperPathCost OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Actual oper value of port cost of msti."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
|
|
::= {fsStpPortMstiInstanceEntry 4 }
|
|
|
|
fsStpPortMstiPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the priority field which is contained in
|
|
the first (in network byte order) octet of the (2 octet
|
|
long) Port ID."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
DEFVAL { 128 }
|
|
::= {fsStpPortMstiInstanceEntry 5 }
|
|
|
|
fsStpPortMstiDesignatedRoot OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The unique Bridge Identifier of the Bridge
|
|
recorded as the Root."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
|
|
::= {fsStpPortMstiInstanceEntry 6 }
|
|
|
|
fsStpPortMstiDesignatedCost OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The path cost of the Designated Port of the segment
|
|
connected to this port."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
|
|
::= {fsStpPortMstiInstanceEntry 7 }
|
|
|
|
fsStpPortMstiDesignatedBridge OBJECT-TYPE
|
|
SYNTAX BridgeId
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Bridge Identifier of the bridge which this
|
|
port considers to be the Designated Bridge for
|
|
this port's segment."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
|
|
::= {fsStpPortMstiInstanceEntry 8 }
|
|
|
|
fsStpPortMstiDesignatedPort OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Port Identifier of the port on the Designated
|
|
Bridge for this port's segment."
|
|
REFERENCE
|
|
"IEEE 802.1s-d14-1: Section 12.8.2.2.3."
|
|
|
|
::= {fsStpPortMstiInstanceEntry 9 }
|
|
|
|
fsStpPortMstiPortRole OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabledPort(1),
|
|
alternatePort(2),
|
|
backupPort(3),
|
|
rootPort(4),
|
|
designatedPort(5),
|
|
masterPort(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Actual role of port in msti."
|
|
::= {fsStpPortMstiInstanceEntry 10 }
|
|
|
|
fsStpPortMstiPortForwardTransitions OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times this port has transitioned
|
|
from the Learning state to the Forwarding state in msti."
|
|
::= {fsStpPortMstiInstanceEntry 11 }
|
|
|
|
|
|
|
|
fsStpMstiReset OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object allow of resetting MST configuration
|
|
parameter reset to default settings. set its value to any
|
|
but 0, will cause agent reset the parameters, set it to 0
|
|
will cause no action. this operation may cause some interval
|
|
the station can not connect the agent depending on the
|
|
parameters previous set."
|
|
::= { fsMstpMIBObjects 7}
|
|
|
|
fsStpCistVlansAddMapped OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN. The
|
|
first octet corresponds to VLANs with VlanIndex values
|
|
of 0 through 7; the second octet to VLANs 8 through
|
|
15; etc. The most significant bit of each octet
|
|
corresponds to the lowest value VlanIndex in that octet.
|
|
|
|
For each VLAN, if it is mapped to this MST instance,
|
|
then the bit corresponding to that VLAN is set to '1'."
|
|
::= { fsMstpMIBObjects 8 }
|
|
|
|
fsStpCistVlansGetMapped OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A string of octets containing one bit per VLAN. The
|
|
first octet corresponds to VLANs with VlanIndex values
|
|
of 0 through 7; the second octet to VLANs 8 through
|
|
15; etc. The most significant bit of each octet
|
|
corresponds to the lowest value VlanIndex in that octet.
|
|
|
|
For each VLAN, if it is mapped to this MST instance,
|
|
then the bit corresponding to that VLAN is set to '1'."
|
|
::= { fsMstpMIBObjects 9 }
|
|
|
|
|
|
fsStpCistRemainingHopCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remaining hop count for CIST."
|
|
::= { fsMstpMIBObjects 10 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- rstpMIB - Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
|
|
stpExternConformance OBJECT IDENTIFIER ::= { fsStpMIB 4 }
|
|
|
|
stpExternGroups OBJECT IDENTIFIER ::= { stpExternConformance 1 }
|
|
|
|
-- stpExternCompliances OBJECT IDENTIFIER ::= { stpExternConformance 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
stpExternGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
fsSysStpStatus,
|
|
fsSysStpReset,
|
|
fsStpPortIfIndex,
|
|
fsStpPortAdminPathCost,
|
|
fsStpPortOperPathCost,
|
|
fsStpPortRole
|
|
-- fsStpPortIfRunSTP
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Spanning Tree extern information for the bridge."
|
|
::= { stpExternGroups 1 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Compliance statements
|
|
-- -------------------------------------------------------------
|
|
--stpExternCompliance MODULE-COMPLIANCE
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The compliance statement for device support of bridging
|
|
-- services."
|
|
--
|
|
-- MODULE
|
|
-- MANDATORY-GROUPS {
|
|
-- stpExternGroup
|
|
-- }
|
|
-- OBJECT dot1dStpPortPathCost
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION "Write access is not required."
|
|
--
|
|
-- OBJECT dot1dStpPortEnable
|
|
-- MIN-ACCESS read-only
|
|
-- DESCRIPTION "Write access is not required."
|
|
--
|
|
-- OBJECT dot1dStpHoldTime
|
|
-- MIN-ACCESS not-accessible
|
|
-- DESCRIPTION "Access is not required."
|
|
--
|
|
-- OBJECT dot1dStpPortState
|
|
-- SYNTAX INTEGER {
|
|
-- disabled(1),
|
|
-- blocking(2),
|
|
-- listening(3),
|
|
-- learning(4),
|
|
-- forwarding(5),
|
|
-- broken(6),
|
|
-- discard(7)
|
|
-- }
|
|
-- DESCRIPTION "Add a new syntax."
|
|
--
|
|
-- ::= { stpExternCompliances 1 }
|
|
|
|
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- rstpMIB - Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
rstpConformance OBJECT IDENTIFIER ::= { fsStpMIB 5 }
|
|
|
|
rstpGroups OBJECT IDENTIFIER ::= { rstpConformance 1 }
|
|
|
|
rstpCompliances OBJECT IDENTIFIER ::= { rstpConformance 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
rstpBridgeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
fsStpVersion,
|
|
fsStpTxHoldCount,
|
|
fsStpBpduGuard,
|
|
fsStpBpduFilter
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rapid Spanning Tree information for the bridge."
|
|
::= { rstpGroups 1 }
|
|
|
|
rstpDefaultPathCostGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
fsStpPathCostDefault
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default Spanning Tree path cost information."
|
|
::= { rstpGroups 2 }
|
|
|
|
rstpPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
fsRstpExtPortIfIndex,
|
|
fsStpPortProtocolMigration,
|
|
fsStpPortAdminEdgePort,
|
|
fsStpPortOperEdgePort,
|
|
fsStpPortAdminPointToPoint,
|
|
fsStpPortOperPointToPoint,
|
|
fsStpPortBpduGuard,
|
|
fsStpPortBpduFilter,
|
|
-- fsStpPortCistRegionRoot,
|
|
-- fsStpPortCistPathCost,
|
|
-- fsStpPortHelloTime,
|
|
fsStpCistRegionRoot,
|
|
fsStpCistPathCost
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rapid Spanning Tree information for individual ports."
|
|
::= { rstpGroups 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
rstpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for device support of bridging
|
|
services."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
rstpBridgeGroup,
|
|
rstpDefaultPathCostGroup,
|
|
rstpPortGroup
|
|
}
|
|
|
|
GROUP rstpDefaultPathCostGroup
|
|
DESCRIPTION
|
|
"Support for this group is mandatory only if
|
|
both 16-bit and 32-bit Path Costs are supported."
|
|
::= { rstpCompliances 1 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- mstpMIB - Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
mstpConformance OBJECT IDENTIFIER ::= { fsStpMIB 6 }
|
|
|
|
mstpGroups OBJECT IDENTIFIER ::= { mstpConformance 1 }
|
|
|
|
mstpCompliances OBJECT IDENTIFIER ::= { mstpConformance 2 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
mstpBridgeRegionGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
fsStpMstiMaxInstanceNumber,
|
|
fsStpMstiRegionName,
|
|
fsStpMstiRegionRevision,
|
|
fsStpMstiMaxHopNumber
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Msti information for the bridge."
|
|
::= { mstpGroups 1 }
|
|
|
|
mstpMstiBridgeGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
fsStpMstiInstanceIndex,
|
|
fsStpMstiInstanceVlansAddMapped,
|
|
fsStpMstiInstanceVlansDeleteMapped,
|
|
fsStpMstiInstanceVlansGetMapped,
|
|
fsStpMstiInstanceRemainingHopCount,
|
|
fsStpMstiPriority,
|
|
-- fsStpMstiBridgeId,
|
|
fsStpMstiTimeSinceTopologyChange,
|
|
fsStpMstiTopChanges,
|
|
-- fsStpMstiTopChanged,
|
|
fsStpMstiDesignatedRoot,
|
|
fsStpMstiRootCost,
|
|
fsStpMstiRootPort,
|
|
fsStpMstiInstanceEntryStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default Spanning Tree path cost information."
|
|
::= { mstpGroups 2 }
|
|
|
|
mstpMstiPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- fsStpPortMstiUpTime,
|
|
fsStpPortMstiState,
|
|
-- fsStpPortMstiEnable,
|
|
-- fsStpPortMstiPortId,
|
|
fsStpPortMstiAdminPathCost,
|
|
fsStpPortMstiOperPathCost,
|
|
fsStpPortMstiPriority,
|
|
fsStpPortMstiDesignatedRoot,
|
|
fsStpPortMstiDesignatedCost,
|
|
fsStpPortMstiDesignatedBridge,
|
|
fsStpPortMstiDesignatedPort,
|
|
fsStpPortMstiPortRole,
|
|
fsStpPortMstiPortForwardTransitions
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Rapid Spanning Tree information for individual ports."
|
|
::= { mstpGroups 3 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Compliance statements
|
|
-- -------------------------------------------------------------
|
|
|
|
mstpCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for device support of bridging
|
|
services."
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
mstpBridgeRegionGroup,
|
|
mstpMstiBridgeGroup,
|
|
mstpMstiPortGroup
|
|
}
|
|
|
|
::= { mstpCompliances 1 }
|
|
END
|