Observium_CE/mibs/fscom/FS-LTE-MIB

924 lines
25 KiB
Plaintext

-- *******************************************************************
-- FS-LTE-MIB.mib : FS MIB
-- February 2016, zhengrongying
--
-- Copyright (c) 2010 by FS.COM Inc..
-- All rights reserved.
-- *******************************************************************
FS-LTE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
Counter64,
IpAddress,
Unsigned32
FROM SNMPv2-SMI
TruthValue,
DisplayString,
MacAddress,
RowStatus
FROM SNMPv2-TC
Gauge
FROM RFC1155-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM RFC1213-MIB
TimeTicks
FROM SNMPv2-SMI
fsMgmt
FROM FS-SMI;
--*******************************************
--* module definition
--*******************************************
fsLteMIB MODULE-IDENTITY
LAST-UPDATED "201002260000Z"
ORGANIZATION
"FS.COM Inc.."
CONTACT-INFO
"Tel: 400-865-2852
E-mail: https://www.fs.com/live_chat_service_mail.html "
DESCRIPTION
"
Wlan software private MIB for FS SNC according to the China
Mobile standard. This is device manage MIB.
"
REVISION "201002280000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { fsMgmt 148 }
--*******************************************
--* module definition end
--*******************************************
lteEnbSystemInfoConfigObjects OBJECT IDENTIFIER ::= { fsLteMIB 1 }
--************************************************** lteEnbSystemInfoConfigObjects
--* lteEnbGeneralInfoConfigTable begins *
--**************************************************
lteEnbGeneralInfoConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF LteEnbGeneralInfoConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information configure table."
::={ lteEnbSystemInfoConfigObjects 1 }
lteEnbGeneralInfoConfigEntry OBJECT-TYPE
SYNTAX LteEnbGeneralInfoConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information configure table."
INDEX { lteEnbMacAddr }
::= { lteEnbGeneralInfoConfigTable 1 }
LteEnbGeneralInfoConfigEntry ::=
SEQUENCE {
lteEnbMacAddr MacAddress,
lteEnbName DisplayString,
lteEnbDLBandWidth INTEGER,
lteEnbMCC INTEGER,
lteEnbMNC INTEGER,
lteEnbTac INTEGER,
lteEnbFrameType INTEGER,
lteEnbTddConfig INTEGER,
lteEnbTddConfigS INTEGER,
lteEnbPrefixType INTEGER,
lteEnbFreqBandIndicator INTEGER,
lteEnbDownlinkFrequency INTEGER,
lteEnbUplinkFrequencyOffset INTEGER,
lteEnbTxmode INTEGER,
lteEnbNidCell INTEGER,
lteEnbRsPower INTEGER,
lteEnbReset INTEGER,
lteEnbTxpower INTEGER,
lteEnbqRxLvlmin INTEGER,
lteEnbPdschRsPower INTEGER,
lteEnbPuschP0Nominal INTEGER,
lteEnbPuschAlpha INTEGER,
lteEnbPucchP0Nominal INTEGER,
lteEnbDtchTimer INTEGER,
lteEnbLB INTEGER,
lteEnbICIC INTEGER,
lteEnbEdgeRbStart INTEGER,
lteEnbEdgeRbEnd INTEGER,
lteEnbEdgeRsrpThold INTEGER,
lteEnbEdgeDifThold INTEGER,
lteEnbMeas INTEGER,
lteEnbMeasGap INTEGER,
lteEnbMeasCarrfreq1 INTEGER,
lteEnbMeasCarrfreq2 INTEGER,
lteEnbMeasA1Thold INTEGER,
lteEnbMeasA2Thold INTEGER,
lteEnbMeasA3Offset INTEGER,
lteEnbMeasA3Hys INTEGER,
lteEnbMeasA3TimeTrig INTEGER,
lteEnbMeasA3RpIntval INTEGER,
lteEnbID INTEGER
}
lteEnbMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mac address of enb."
::= { lteEnbGeneralInfoConfigEntry 1 }
lteEnbName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of enb."
::= { lteEnbGeneralInfoConfigEntry 2 }
lteEnbDLBandWidth OBJECT-TYPE
SYNTAX INTEGER {
bandwidth-5M(25),
bandwidth-10M(50),
bandwidth-15M(75),
bandwidth-20M(100)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The dl bandwidth of enb. "
::= { lteEnbGeneralInfoConfigEntry 3 }
lteEnbMCC OBJECT-TYPE
SYNTAX INTEGER (0..999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mobile Country Code of enb."
::= { lteEnbGeneralInfoConfigEntry 4 }
lteEnbMNC OBJECT-TYPE
SYNTAX INTEGER (0..999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mobile Network Code of enb."
::= { lteEnbGeneralInfoConfigEntry 5 }
lteEnbTac OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Tracking Area Code of enb."
::= { lteEnbGeneralInfoConfigEntry 6 }
lteEnbFrameType OBJECT-TYPE
SYNTAX INTEGER {
fdd(0),
tdd(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Frame type of enb: fdd or tdd."
::= { lteEnbGeneralInfoConfigEntry 7 }
lteEnbTddConfig OBJECT-TYPE
SYNTAX INTEGER (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The tdd config in enb.only valid in frame type is tdd."
::= { lteEnbGeneralInfoConfigEntry 8 }
lteEnbTddConfigS OBJECT-TYPE
SYNTAX INTEGER (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tdd config Specil subframe num.only valid in frame type is tdd <0 - 10>."
::= { lteEnbGeneralInfoConfigEntry 9 }
lteEnbPrefixType OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tdd enb prefix type."
::= { lteEnbGeneralInfoConfigEntry 10 }
lteEnbFreqBandIndicator OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb current Freq band Indicator."
::= { lteEnbGeneralInfoConfigEntry 11 }
lteEnbDownlinkFrequency OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb downlink freqency."
::= { lteEnbGeneralInfoConfigEntry 12 }
lteEnbUplinkFrequencyOffset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb uplink freqency offset"
::= { lteEnbGeneralInfoConfigEntry 13 }
lteEnbTxmode OBJECT-TYPE
SYNTAX INTEGER (2..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb tx mode"
::= { lteEnbGeneralInfoConfigEntry 14 }
lteEnbNidCell OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb cell id"
::= { lteEnbGeneralInfoConfigEntry 15 }
lteEnbRsPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb Reference power"
::= { lteEnbGeneralInfoConfigEntry 16 }
lteEnbReset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb Reset flag"
::= { lteEnbGeneralInfoConfigEntry 17 }
lteEnbTxpower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb TX Power"
::= { lteEnbGeneralInfoConfigEntry 18 }
lteEnbqRxLvlmin OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ue min rx level "
::= { lteEnbGeneralInfoConfigEntry 19 }
lteEnbPdschRsPower OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb pdsch reference power"
::= { lteEnbGeneralInfoConfigEntry 20 }
lteEnbPuschP0Nominal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb pusch P0 nominal"
::= { lteEnbGeneralInfoConfigEntry 21 }
lteEnbPuschAlpha OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb pusch alpha"
::= { lteEnbGeneralInfoConfigEntry 22 }
lteEnbPucchP0Nominal OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb pucch nominal"
::= { lteEnbGeneralInfoConfigEntry 23 }
lteEnbDtchTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb Dtch timer val"
::= { lteEnbGeneralInfoConfigEntry 24 }
lteEnbLB OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb load balance config"
::= { lteEnbGeneralInfoConfigEntry 25 }
lteEnbICIC OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb ICIC config"
::= { lteEnbGeneralInfoConfigEntry 26 }
lteEnbEdgeRbStart OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enodeb Edge RB start"
::= { lteEnbGeneralInfoConfigEntry 27 }
lteEnbEdgeRbEnd OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enodeb Edge RB end"
::= { lteEnbGeneralInfoConfigEntry 28 }
lteEnbEdgeRsrpThold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb Edge rsrp threshold"
::= { lteEnbGeneralInfoConfigEntry 29 }
lteEnbEdgeDifThold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb edge diff threshold"
::= { lteEnbGeneralInfoConfigEntry 30 }
lteEnbMeas OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb measure"
::= { lteEnbGeneralInfoConfigEntry 31 }
lteEnbMeasGap OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb measure gap config"
::= { lteEnbGeneralInfoConfigEntry 32 }
lteEnbMeasCarrfreq1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb measure carrier frequence 1"
::= { lteEnbGeneralInfoConfigEntry 33 }
lteEnbMeasCarrfreq2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enb measure carrier frequence 2"
::= { lteEnbGeneralInfoConfigEntry 34 }
lteEnbMeasA1Thold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The eNodeB measure event A1 threshold"
::= { lteEnbGeneralInfoConfigEntry 35 }
lteEnbMeasA2Thold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The eNodeB measure event A2 threshold "
::= { lteEnbGeneralInfoConfigEntry 36 }
lteEnbMeasA3Offset OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The eNodeB measure event A3 Offset"
::= { lteEnbGeneralInfoConfigEntry 37 }
lteEnbMeasA3Hys OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The eNodeB measure event A3 hysteresis"
::= { lteEnbGeneralInfoConfigEntry 38 }
lteEnbMeasA3TimeTrig OBJECT-TYPE
SYNTAX INTEGER {
ms0(0),
ms40(1),
ms64(2),
ms80(3),
ms100(4),
ms128(5),
ms160(6),
ms256(7),
ms320(8),
ms480(9),
ms512(10),
ms640(11),
ms1024(12),
ms1280(13),
ms2560(14),
ms5120(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The eNodeB measure event A3 timer trigger"
::= { lteEnbGeneralInfoConfigEntry 39 }
lteEnbMeasA3RpIntval OBJECT-TYPE
SYNTAX INTEGER {
ms120(0),
ms240(1),
ms480(2),
ms640(3),
ms1024(4),
ms2048(5),
ms5120(6),
ms10240(7),
min1(8),
min6(9),
min12(10),
min30(11),
min60(12),
spare3(13),
spare2(14),
spare1(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The eNodeB measure event A3 report intval"
::= { lteEnbGeneralInfoConfigEntry 40 }
lteEnbID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The eNodeB id"
::= { lteEnbGeneralInfoConfigEntry 41 }
--**************************************************
--* lteEnbGeneralInfoConfigTable ends *
--*************************************************
--*********************************************************************************
--lteUEInfoGetObjects begins
--*********************************************************************************
lteUEInfoGetObjects OBJECT IDENTIFIER ::= { fsLteMIB 2 }
lteUEInfoGetTable OBJECT-TYPE
SYNTAX SEQUENCE OF LteUEInfoGetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The UE info in ac."
::={ lteUEInfoGetObjects 1 }
lteUEInfoGetEntry OBJECT-TYPE
SYNTAX LteUEInfoGetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The UE info in ac"
INDEX { lteUEImsi }
::= { lteUEInfoGetTable 1 }
LteUEInfoGetEntry ::=
SEQUENCE {
lteUEImsi DisplayString,
lteUEIpaddr IpAddress,
lteUEGuti DisplayString,
lteUEUptime TimeTicks,
lteUERxpkt Counter64,
lteUETxpkt Counter64,
lteUECellId INTEGER,
lteUEIsAttached INTEGER,
lteUECapbility INTEGER,
lteUEAssoEnbMac MacAddress,
lteUERrcState INTEGER,
lteUERxbytes Counter64,
lteUETxbytes Counter64
}
lteUEImsi OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue imsi."
::= { lteUEInfoGetEntry 1}
lteUEIpaddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ue ip addr."
::= { lteUEInfoGetEntry 2}
lteUEGuti OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue guti."
::= { lteUEInfoGetEntry 3}
lteUEUptime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue attach to nas time."
::= { lteUEInfoGetEntry 4}
lteUERxpkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue receive packages number."
::= { lteUEInfoGetEntry 5}
lteUETxpkt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue transmit packages number."
::= { lteUEInfoGetEntry 6}
lteUECellId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue associate cell id."
::= { lteUEInfoGetEntry 7}
lteUEIsAttached OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue is attached to nas."
::= { lteUEInfoGetEntry 8}
lteUECapbility OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue capbility."
::= { lteUEInfoGetEntry 9}
lteUEAssoEnbMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue associate enb mac address."
::= { lteUEInfoGetEntry 10}
lteUERrcState OBJECT-TYPE
SYNTAX INTEGER {
connected(1),
dis-connected(0)
} MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue rrc state."
::= { lteUEInfoGetEntry 11}
lteUERxbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue receive packages bytes."
::= { lteUEInfoGetEntry 12}
lteUETxbytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ue transmit packages bytes."
::= { lteUEInfoGetEntry 13}
--**************************************************
--* lteUEInfoGetObjects ends *
--**************************************************
lteEnbInfoGetObjects OBJECT IDENTIFIER ::= { fsLteMIB 3 }
--*********************************************************************************
--lteEnbInfoGetObjects begins
--*********************************************************************************
lteEnbInfoGetTable OBJECT-TYPE
SYNTAX SEQUENCE OF LteEnbInfoGetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information configure table."
::={ lteEnbInfoGetObjects 1 }
lteEnbInfoGetEntry OBJECT-TYPE
SYNTAX LteEnbInfoGetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information configure table."
INDEX { lteEnbMacAddr }
::= { lteEnbInfoGetTable 1 }
LteEnbInfoGetEntry ::=
SEQUENCE {
lteEnbNameInfo DisplayString,
lteEnbFreqBandNumber INTEGER,
lteEnbUENumber INTEGER
}
lteEnbNameInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of enb."
::= { lteEnbInfoGetEntry 1 }
lteEnbFreqBandNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The band number of enb."
::= { lteEnbInfoGetEntry 2 }
lteEnbUENumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UE number connected to this enb."
::= { lteEnbInfoGetEntry 3 }
--*********************************************************************************
--lteEnbInfoGetObjects ends
--*********************************************************************************
--**************************************************
--* lteEpcStatusEntry starts *
--**************************************************
lteEpcStatusEntry OBJECT IDENTIFIER ::= { fsLteMIB 4 }
lteEpcAttachUENumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the ue number attached to this epc."
::= { lteEpcStatusEntry 1 }
--**************************************************
--* lteEpcStatusEntry ends *
--**************************************************
--**************************************************
--* lteEpcConfigEntry starts *
--**************************************************
lteEpcConfigEntry OBJECT IDENTIFIER ::= { fsLteMIB 5 }
lteEpcEEA OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the ue number attached to this epc."
::= { lteEpcConfigEntry 1 }
lteEpcEIA OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the EIA value epc."
::= { lteEpcConfigEntry 2 }
lteEpcMMECode OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the MME value."
::= { lteEpcConfigEntry 3 }
lteEpcMMEGid OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the MME Gid value epc."
::= { lteEpcConfigEntry 4 }
lteEpcMCC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the MCC value."
::= { lteEpcConfigEntry 5 }
lteEpcMNC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the epc MNC."
::= { lteEpcConfigEntry 6 }
lteEpcEnbKeepalivetimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the ENodeB keep alive timer value."
::= { lteEpcConfigEntry 7 }
lteEpcDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"the DNS address."
::= { lteEpcConfigEntry 8 }
--**************************************************
--* lteEpcStatusEntry ends *
--**************************************************
lteUEIMSIMapIpObjects OBJECT IDENTIFIER ::= { fsLteMIB 6 }
lteUEIMSIMapIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF LteUEIMSIMapIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information configure table."
::={ lteUEIMSIMapIpObjects 1 }
lteUEIMSIMapIpEntry OBJECT-TYPE
SYNTAX LteUEIMSIMapIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The general information configure table."
INDEX { lteUEIMSI }
::= { lteUEIMSIMapIpTable 1 }
LteUEIMSIMapIpEntry ::=
SEQUENCE {
lteUEIMSI DisplayString,
lteUEIP IpAddress,
lteUERowStatus RowStatus
}
lteUEIMSI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UE imsi."
::= { lteUEIMSIMapIpEntry 1 }
lteUEIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UE ip."
::= { lteUEIMSIMapIpEntry 2 }
lteUERowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status column used for creating and
deleting instances of the columnar objects in the table."
::= { lteUEIMSIMapIpEntry 3}
--**************************************************
--* lteFSTrapObjects begins *
--**************************************************
lteFSAlarmTraps OBJECT IDENTIFIER ::= { fsLteMIB 7 }
--**************apSystemAlarmTraps start ************************************
lteEnbOnlineTraps NOTIFICATION-TYPE
OBJECTS {
eNodeBmac,
eNodeBname
}
STATUS current
DESCRIPTION
" This trap will be sent when the enodeB online."
::= { lteFSAlarmTraps 1 }
lteEnbOfflineTraps NOTIFICATION-TYPE
OBJECTS {
eNodeBmac,
eNodeBname
}
STATUS current
DESCRIPTION
" This trap will be sent when the enodeB offline."
::= { lteFSAlarmTraps 2 }
lteUEAttachedTraps NOTIFICATION-TYPE
OBJECTS {
ueIMSI,
ueIpaddr
}
STATUS current
DESCRIPTION
" This trap will be sent when the UE Attached."
::= { lteFSAlarmTraps 3 }
lteUEDetachedTraps NOTIFICATION-TYPE
OBJECTS {
ueIMSI,
ueIpaddr
}
STATUS current
DESCRIPTION
" This trap will be sent when the UE Detached."
::= { lteFSAlarmTraps 4 }
lteFSAlarmTrapObjects OBJECT IDENTIFIER ::= { fsLteMIB 8 }
--***************lteFSAlarmTrapObjects*************
eNodeBmac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"enb mac address"
::= { lteFSAlarmTrapObjects 1 }
eNodeBname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" enodeb name"
::= { lteFSAlarmTrapObjects 2 }
ueIMSI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"UE IMSI"
::= { lteFSAlarmTrapObjects 3 }
ueIpaddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" ue IP address "
::= { lteFSAlarmTrapObjects 4 }
END